Back catalogue: Studio Equipment

Notes: Vintage tape-style delay smaller than a cassette player!

Tape delay is loved for its warmth and charming imperfections compared to pristine digital delays. Their preamps could be pushed to saturation and, over time, the tape in vintage delay units would degrade causing a signature warble loved by many. These signature elements are captured and packed into Electro-Harmonix's Pico Rerun tape delay. Based off the tape delay algorithm found in the Canyon Delay & Looper, the Rerun gives vintage vibes with modern features.

The Rerun features a simple control set and tap tempo for ease of use in any situation. BLEND sets the wet/dry blend. DELAY adjusts the delay time from 8ms to 3s. SAT adds tape saturation and distortion for added crunch to only the wet signal, keeping your dry signal unaffected by the added distortion. FDBK sets the level of repeats from 1 to infinite for runaway oscillation. You can also press and hold the footswitch to engage infinite repeats in an instant. The FLUTTER mode switch toggles between low, medium, and heavy modulation effects ranging from slight chorusing to seasick thickness.

Tap Tempo is simple and easy to use. Just press and release the footswitch at least two times to set the tempo and the LED will blink to confirm your tap tempo. Additionally, the Rerun also features selectable Tails bypass allowing echoes to continue after putting the pedal into bypass.

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 3.65 x 2.0 x 2.0
Current Draw: 100mA
Year Released: 2023

Notes: Bridging the worlds of overdrive, distortion, and fuzz in a sub-compact pico chassis!

The EHX Pico Triboro Bridge is a tri-mode drive box with a wide range of tonal possibilities. Featuring Overdrive, Distortion, and Fuzz modes, it bridges any gap in your gain. With a powerful EQ, input contouring, and a pico-sized footprint, the Triboro Bridge can be your tonal keystone or a welcome change from the routine drive.

Starting with Overdrive mode, the gain spectrum ranges from low to mid with an open voicing that can be used as a light always on drive or a solo boost. Engage the Triboro's Distortion mode for additional gain-staging for a tone from crunchy rhythms to fully saturated leads. Transform the pedal into something completely different with the Fuzz mode's over-the-top gain, Gate and Low Pass Filter.

The Triboro Bridge controls features Volume and Gain knobs to control the overall output and saturation of the tone. In Overdrive and Distortion modes, the Treble and Bass knobs act as a Baxandall EQ for simple yet effective tone shaping. In Fuzz mode the Treble knob is now the gate more, controlling the Fuzz's noise gate threshold, and the Bass knob controls a Low Pass Filter for extreme tonal variations. Additionally, the Triboro Bridge features an Input Contouring EQ which can be applied to your tone at the input, for a more modern, sculpted tone in all modes.

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 3.65 x 2.0 x 2.0
Current Draw: 100mA
Year Released: 2023

Notes: The Pitch Forkr+ features two independent pitch shifting engines with full control over each. Both will transpose your pitch up or down over a +/- three octave range and detune +/-99 cents. With rock solid tracking, an organic, musical tone and extensive control, it's your ultimate harmonizer.

Notes: The Platform is a sophisticated, professional stereo compressor limiter that includes volume swell and tape reverse, plus overdrive. It's powerful for studio or post production work, yet compact enough to take to a gig!

The Platform's compressor/limiter enables the user to precisely tune their instrument's dynamics and provides controls for Volume, Attack, Release and Sustain plus pushbuttons for Hard or Soft Knee and the Limiter. Its foot-switchable overdrive section adds to the pedal's versatility with dedicated controls for Volume, Tone and Drive. (Volume) swell is controlled by a dedicated knob. As it's turned clockwise swell increases from zero and notes fade in more gradually.

The Platform is equipped for true stereo operation and can be used as Mono In and Out, Mono In and Stereo Out, or Stereo In and Stereo Out. The pedal includes a three color, bar graph, LED array with eight LEDs that display the compressor's actual gain reduction in real-time; they act in opposite to a VU meter. The Platform Stereo Compressor/Limiter comes with an EHX9.6-200mA power supply.

Notes: Transform your electric guitar into a sitar!

Very few instruments offer as much harmonic and dynamic flexibility as a sitar. Electro-Harmonix has streamlined the essence of the sitar into a compact enclosure that offers a polyphonic lead voice and tuneable sympathetic string drones that dynamically react to your playing. With the EHX Ravish Sitar Emulator, you can create your own custom scales for the sympathetic strings while you set the decay time for the lead voice.

Two expression pedal inputs allow you to bend the pitch of the lead voice and control the volume of the sympathetic strings simultaneously. These unique controls offer the player the ability to program the Ravish to become a totally unique and organic instrument unto itself.

The Ravish is a truly new design with the flexibility to be a crossover tonal wonder.

Download free Ravish settings

Transform your electric guitar into a sitar
Lead sitar voice tracks your notes polyphonically with a wide range of tonal possibilities
Selectable decay speed for the Lead voice
Sympathetic string drone simulation with a wide tonal range
Selectable keys and scales including major, minor and exotic provided for the Sympathetic strings
Power adapter included

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 5.75 x 4.75 x 2.5
Current Draw: 160mA
Year Released: 2011

Notes: Expanding on Electro Harmonix's first homage to the tone that launched a thousand riffs, the EHX Satisfaction Plus delivers a wide palette of tones from classic '60s snarl to creamy lead tone to thick, earth-shaking sludge!

Where the original Satisfaction Fuzz circuit was a focused tribute, the Satisfaction Plus Fuzz treats the classic tone to a modern control set that includes a FAT/NORM mode switch, Bias control, and Tone knob. The added FAT mode features a tone that is bigger and warmer than the NORM mode for woolly leads and giant wall-of-thunder riffs. The Tone control is an active tilt-shift EQ that inversely controls both the treble and bass of the fuzz for broad tonal shifting. Set the Bias control to dial in the fuzz character from balanced and open to gated and snarly.

Specifications

Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (inches): 4.5 x 2.75 x 2.1
Current Draw: 5mA
Year Released: 2023

Notes: The late 1970s rarity Electro-Harmonix Slap-Back Echo pedal is reissued with modern updates and a Pico footprint!

The 50s era gave birth to an iconic sound in which a single, short delay was utilized to add depth and rhythmic effect on countless recordings. The newly reissued all-analogue design of the EHX Slap-Back Echo delivers this beloved classic sound and more in a Pico-sized pedalboard-friendly package. With three delay time settings and up to +20dB of boost, the Slap-Back Echo can achieve subtle doubling effects to intense bathroom reflections all with the distinct flavour of bucket-brigade (BBD) circuitry.

Housed in EHX's Pico-sized chassis, the Slap-Back Echo features Gain and Blend knobs as well as a Time switch. The Gain knob controls the input signal before the echo circuit and also adjusts the overall volume at the output with a boost of up to +20dB. The Blend knob mixes the dry signal and the echo signal from 100% dry to 100% echo. The Time switch selects between three different delay times: 45ms, 65ms, and 100ms.

Specifications

Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 3.65 x 2.0 x 2.0
Current Draw: 15mA
Year Released: 2023

Notes: The finest analogue chorus!

The EHX Small Clone Chorus is a reissue of the classic analogue chorus pedal popularised by Kurt Cobain. Depth and Rate controls create the finest sounds, from clear, rich and dimensional to warm pulsating warbles.

True bypass
9V battery included

Specifications

Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 5.25 x 3.38 x 2.75
Current Draw: 12mA
Year Released: 2000

Notes: Get the sound that made the Classic 1970 Small Stone famous!

The EHX Small Stone Phase Shifter generates thick sweeping phase shifting with liquid transparency. Feedback colour control adds a tingling swirl. Blues players dig the Stone's rapid rotating speaker effect. Country players add tasty seasoning to their chicken pickin'. Metal-heads dig its jet plane swoosh.

Variable rate control allows slow and smooth to rapid edge frequency sweeps
Colour switch turns up the feedback for a more pronounced phase shifter effects
Tough and compact die-cast chassis
9V battery included

Specifications:

Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 10mA
Year Released: 2006

Notes: Transparent overdrive with great touch and response!

Tone aficionados kept telling Mike Matthews about a pedal that had achieved a lot of buzz because it was only obtainable at an exorbitant price. That pedal was the Klon Centaur.

A believer in bringing great tools to starving musicians, Mike tasked his trusty team to create an affordable alternative, and that is how the EHX Soul Food Transparent Overdrive was cooked up.

Its circuitry features boosted power rails to provide abundant headroom and increased definition. Best of all, you don't have to be a rock star to own one!

Transparent overdrive
Boosted power rails for extended headroom and definition
Super responsive
Compact, rugged design
Selectable true bypass or buffered bypass modes
Power adapter included

Specifications

Circuit: Analogue
Bypass: Selectable True Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included (optional 9V battery not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 22mA
Year Released: 2013

Notes: Liftoff with the EHX Spruce Goose Overdrive!

Liftoff with the EHX Spruce Goose Overdrive, an elevated take on a Bluesbreakerr-style OD with a smooth, rich breakup that retains clarity and dynamics. The Spruce Goose soars with a host of new features including a LIFT switch accessing 3 input gain settings, additional output, and expanded EQ to send you tone flying! From meaty boost to smooth singing leads, the Spruce Goose steers your tone into a variety of inspiring and musical directions.

The engine of the Spruce Goose is an overdrive circuit renowned for its natural breakup and amp-like response. This circuit is then elevated to new heights by the LIFT switch which selects between 3 levels of input gain. LIFT effectively works as an input boost, goosing the front end of the drive circuit hitting harder and producing a more compressed, saturated tone while still retaining its dynamic feel and transparent tone. GAIN and VOL knobs adjust for exact drive and output levels. EQ of the pedal consists of a TREBLE knob for taming topping and an active BASS knob to cut or boost bass frequencies. BASS is especially helpful for adding girth to single coil guitars or tightening the low end on warmer humbucker guitars.

The Spruce Goose also features mechanical relay true bypass switching with latching and momentary action. Tap the footswitch for a normal latching toggle or press and hold the footswitch for a momentary blast of gain and boost! Great for stepping out in front of the mix for pulling quick lick or moment of sonic chaos.

All trademarks are the property of their respective owners.

Specifications

Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 20mA
Year Released: 2023

Notes: Vintage tremolo and panning with Wave Form and Shape control!

The EHX Stereo Pulsar Stereo Tap Tremolo generates vintage tremolo and panning that will fill any venue with rhythmic stereo energy. Its Wave Form switch allows you to change the modulation from triangle to square form. The Wave Shape control allows you to control transitions from negative to positive saw tooth or adjust pulse width. This all means you can create any type of stereo tremolo from pure vintage to ones never heard before.

Stereo outputs
Tough and compact die-cast chassis
9V battery included

Specifications

Circuit: Analogue
Bypass: Buffered Bypass
Audio: Stereo
Power Supply: 9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in): 4.75 x 4 x 2.25
Current Draw: 17mA
Year Released: 2007

Notes: A convenient solution for a player's switching needs!

Route your signal to either output A or B, or send it to both at once. Connect a tuner or effects pedal to its dedicated Tuner output. With a fully passive audio path and active LED indication, the EHX Switchblade+ is your utilitarian sidekick.

Route your signal to output A or output B or both simultaneously
Easily switch between different pedal boards
The tuner jack is hardwired to the input jack and provides a direct output for a tuner or other effects regardless of the state of the unit
The audio path is completely passive

SPECIFICATIONS
Circuit
Analog
Audio
Mono
Power Supply
Optional 9V battery or 9.6VDC-200mA power adapter not included
Dimensions (in)
4.5 x 2.75 x 2.1
Current Draw
16mA
Year Released
2011

Notes: The Switchblade Pro is our deluxe switching box featuring true mechanical bypass, soft switching, high quality and low noise buffers, volume controls for all input signals, high headroom and a multitude of possible configurations for all your signal routing needs. This compact pedal is a versatile and indispensable tool!

Notes: Compact all-analog multi-effect pedal featuring the Metal Muff, Neo Clone chorus and Memory Toy delay!

The EHX Tone Tattoo is our first fully-interactive, analog multi-effects pedal. Satisfy your tone jones with a chain that features the Metal Muff Distortion, Neo Clone Chorus and Memory Toy Analog Delay.

Delivers crushing Lead & Rhythm tones. Features full tone sculpting, including two levels of scoop. New Noise Gate for minimal noise. With three critically acclaimed effects, it's like a talisman for great guitar.

All Analog multi-effect: distortion, chorus, delay
Delivers three EHX favorites in one compact pedal
Crushing lead and rhythm tone
Full tone sculpting, including two levels of scoop
New Noise Gate for minimal noise
Power adapter included

Specifications:
Circuit: Analogue
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 5.75 x 4.75 x 2.5
Current Draw: 75mA
Year Released: 2012

Notes: A powerful effects creation and mixing hub with flexible controls for multiple configurations!

The EHX TriParallel Mixer is a powerful effects creation and mixing hub with three separate FX loops and flexible controls allow for multiple configurations.

The Tri Parallel Mixer is surprisingly compact considering the level of functionality it provides, while its intuitive controls and I/O make it easy to operate.

Use it to switch between or mix up to three separate effects loops. Send a guitar or other instrument out to three separate amplifiers, or input three separate instruments to switch between or mix to a single output. Mix effects in parallel to create sounds and allow for options not possible when using effects in series (one after another).

Run up to three FX Loops in parallel and create sounds that are not possible by connecting effects in series
Switch seamlessly between FX Loops in XOR mode
Send one instrument out to three separate amplifiers
Mix three instruments into a single output
Power supply included

Specifications

Circuit: AnalogAnalog w/ Digital Control
Bypass: Buffered Bypass
Audio: Mono
Effects Loop: Yes
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 5.75 x 4.75 x 2.5
Current Draw: 45mA
Year Released: 2019

Notes: Compact multi-effect pedal combining the award-winning Soul Food Overdrive and Holy Grail Max Reverb!

The EHX Turnip Greens is a multi-effect pedal that combines the Soul Food Overdrive and Holy Grail Max Reverb.

The Soul Food delivers transparent sounds starting with clean boost and progressing all the way to intense overdrive. It's equally adept at adding punch to a player's tone, pushing an amp into saturation or in front of other dirt pedals driving them into new worlds of distortion.

The Holy Grail Max provides four carefully crafted reverbs: Spring, Hall, Plate and Reverse. A newly designed analog wet/dry control yields a constant volume curve as the Blend knob is turned from fully dry to fully wet, while also keeping the dry signal analog through the pedal.

A toggle effect-order switch, located in the middle of the Turnip Greens, selects whether the overdrive or reverb is first in the effects chain. Send and Return jacks let the player insert effects into the signal path between the two.

The Turnip Greens features an internal switch that lets the player select between true bypass or buffered bypass for the Soul Food section.

Soul Food goes from clean boost to classic distortion and can easily drive a guitar amp into saturation
Holy Grail Max delivers four studio quality reverbs: Spring, Hall, Plate and Reverse
An Effects Loop lets you put a single pedal or your entire pedalboard in between the Soul Food and Holy Grail Max
An Effect Order toggle switch lets you put either the Soul Food or Holy Grail Max first in the chain
Power supply included

SPECIFICATIONS
Circuit
Analog / Digital
Bypass
Selectable True Bypass
Audio
Mono
Effects Loop
Yes
Power Supply
9.6VDC-200mA power adapter included
Dimensions (in)
5.75 x 4.75 x 2.5
Current Draw
125mA
Year Released
2014

Notes: Killer wah and cocked wah sounds!

The EHX Wailer Wah features the great sound and tone of the award winning Crying Tone Wah in a rugged, lightweight pedal and with a traditional rack and pinion style operating mechanism. It's also extremely affordable.

Traditional rack and pinion style operating mechanism
Super affordable
Rugged yet lightweight, at just over 1.5 pounds it's lighter than most popular wah pedals and a real weight saver for your pedalboard
9V battery included

SPECIFICATIONS
Circuit
Analog
Bypass
True Bypass
Audio
Mono
Power Supply
9V battery included (optional 9.6VDC-200mA power adapter not included)
Dimensions (in)
9.92 x 3.4 x 3.0
Current Draw
6mA
Year Released
2016

Notes: Celebrating the classic, shimmering flanger sounds of Andy Summers, the EHX Walking on the Moon is a tribute to the tones Andy employed while carving his niche in the early days of playing with the Police. Liquid flange effects that hint toward chorus with extra depth and nuance make Andy's sound one of the most coveted in all of the guitar universe.

"This beautiful shimmering which sort of made the sound more bigger and more glamourous - became a sort of characteristic of my guitar sound - A big part of my guitar sound at that time in The Police was the flange sound which we have here today in this great new pedal." - Andy Summers

The Andy Summers Walking on the Moon is an analogue flanger with a simple but powerful control set of RATE, RANGE, and COLOR. RATE sets the speed of modulation which ranges from slow, smooth filter sweeps to jittering vibrato. RANGE controls how narrow or wide the effect sweeps into the bass frequency range. The COLOR control effects the intensity of the flanger effect from subtle chorusing effects to classic jet woosh sounds. These three controls interact to create a wide breath of modulation effects.

Additionally, the Walking on the Moon includes a FILTER MATRIX which disengages the LFO from the flanger circuit, freezing the flanger giving a fixed filter effect, which can add chime or metallic overtones to your sound without the movement of a traditional modulation pedal. A DRY output allows you to split your dry signal from the effected signal.

Special Artist Edition graphics featuring Andy's signature adorn the chassis and a tribute Walking on the Moon poster with art by Laura Josephson is included with each pedal.

Analogue Flanger / Filter Matrix sounds of Andy Summers
RATE sets modulation speed
RANGE adjusts lower limit of flanger sweep
COLOR controls intensity of flanger effect
Dedicated DRY output
Special Artist Edition Graphics
Includes Walking on the Moon poster design by Laura Josephson
True Bypass
9V Power Supply included (optional 9V battery not included)

Specifications
Circuit: Analogue
Bypass: True Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included (optional 9V battery not included)
Dimensions (in): 4.75 x 4 x 2.25
Current Draw: 40mA
Year Released: 2023

Notes: When Empress released the original Compressor back in 2011, it quickly became a favourite among guitar and bass players alike who were searching for something more than the typical oversimplified controls found on most compressor pedals. Although our original Compressor sounded great on bass (and still does!) we set out to do even better.

On top of the full range of features and controls normally only seen in high end studio equipment, such as input and gain reduction metering, independent attack and release controls, a mix knob for parallel compression, and an external sidechain insert, we've now added a fully variable sidechain high pass filter, and a two position 'tone + colour' circuit which adds gentle tone sculpting and harmonic distortion, giving your bass some delicious character.

Specifications:
Input Impedance 1M
Output Impedance 2.2k
Frequency Response (-3dB) 10Hz - 20kHz
Distortion less than 0.1%
Noise -101dB
Power Input Voltage 9 - 18 V DC (Negative tip)
Power Input Connector 2.1mm barrel connector (Negative tip)
Power Consumption ~ 100mA
Enclosure Material Die Cast Aluminum
Input connector 1/4" Jack
Output connector 1/4" Jack
Height (Enclosure only) 1.5"
Height (including controls) 2.5"

Notes: When the original Compressor was released back in 2011, it quickly became a favourite among guitar and bass players alike who were searching for something more than the typical oversimplified controls found on most compressor pedals. Now, based on users' valuable feedback, everything great about the original Compressor has been taken and made even better.

On top of the full range of features and controls normally only seen in high end studio equipment, such as input and gain reduction metering, independent attack and release controls, a mix knob for parallel compression, and an external sidechain insert, Empress have now added a 'tilt' tone eq control, and a selectable sidechain high pass filter built into the Compressor's detection circuit.

Specifications:
Input Impedance 1M
Output Impedance 2.2k
Frequency Response (-3dB) 20Hz - 20kHz
Distortion less than 0.1%
Noise -101dB
Power Input Voltage 9 - 18 V DC (Negative tip)
Power Input Connector 2.1mm barrel connector (Negative tip)
Power Consumption ~ 100mA
Enclosure Material Die Cast Aluminum
Input connector 1/4" Jack
Output connector 1/4" Jack
Height (Enclosure only) 1.5"
Height (including controls) 2.5"
Length 4.8"
Width 2.6"
Weight 1lbs

Notes: Spanning the gamut of known delay possibilities and beyond, the Echosystem could be the ultimate delay-crafting tool. Faithful emulations of classics like digital, tape and analog delays are numerous, as well as Empress' own take on each of these delay styles. Moving beyond the traditional, the vast amount of sonic ground the Echosystem can cover becomes apparent. Check out the ambient modes when you're feeling chilled out, or perhaps a visit to the multi tap modes for a taste of inspiration.

The Dual Engine functionality allows any 2 of these delays to be used together, routed in either parallel, series, or left/right configurations.

In addition to delays, there's the super-useful reverb combos, which will elevate any guitar part. Oh, and don't forget Whisky mode, best accompanied by a dram of whatever you've got!

The pedal has 12 algorithm types, all with multiple variations. For example, there are 4 different tape delays on tap.

Emulations of classic tape and analog units are available, as well as our take on these types of delay.

All the algorithm controls are sitting on a knob in front of you, no fiddling through laborious menus.

Global tap tempo as well as local tempo with lots of subdivisions are available on all modes, in addition to being able to set the delay time directly with the knob.

Features a signal to noise ratio of >104dB and maintains an analog dry path.

2 delays can be used at the same time, each with its own full set of controls and routed in serial, parallel or left/right.

Settings can be saved to 35 presets. With three stomp switches, accessing the presets is easy.

Bank style or scrolling style preset modes.

It can be configured to run with true bypass or buffered bypass if you want to hear trails.

Cabinet Simulator - 3 variations to choose from, perfect for recording, practicing or for gigs without an amp.

Get hum-free operation when operating in stereo with two amps. Output 2 is isolated with a transformer to eliminate nasty ground loops.

48kHz sampling, with 24 bit conversion and 32 bit internal processing.

Dry signal is left untouched, and blended with the wet signal using VCA. (no zipper noise, hooray!)

The Universal Control Port allows you to connect an expression pedal, external tap switch, control voltage, external audio input and MIDI - all using a standard 1/4" jack!

The Advanced configuration menu lets you configure how your delay works. Select from true or buffered bypass, 0-35 presets, MIDI configuration, Control Port(expression pedal, external tap, control voltage and MIDI) as well as which style of preset system to use, input signal pad, output transformer enable and more!

The enclosure measures approximately 5.7" by 3.75" by 1.75", which is delightfully small when considering all the features packed into this unit.

Notes: The #1 EQ pedal returns - better than ever

Empress Effects brought back the most sought-after Parametric EQ pedal, with groundbreaking upgrades.

Everything people loved about the original ParaEq was kept, and more fidelity and control have been added.

More Control

Whether you're trying to cut through a mix or fix a feedback issue, you need precision! The ParaEq MKII offers the most control of any pedal EQ on the market.

More Sweetness

Effortlessly sweeten your tone with beautiful sounding, super smooth Baxandall filters for broad high and low frequency shelving adjustments on the Deluxe.

More Power

The ParaEq MKII pedals operates internally at 27V, providing clean headroom without unwanted clipping.

More Purity

This pedal is able to offer the most control without degradation to the tone due to minimal circuit topology00-the opposite of graphic EQs.

Why Choose Parametric EQ over Graphic EQ?
Parametric VS Graphic EQ Graph
Graphic equalizers provide a convenient visual sense of the EQ curve. However, there is a tradeoff in transparency and precision.

The graph here shows the ParaEq MKII Deluxe (cyan) and a 7-band graphic EQ pedal (magenta) both providing a +4dB boost at around 2 kHz. As can be seen, the ParaEq is much more precise in the changes it can make, whereas the graphic EQ affects nearly the entire frequency spectrum. Furthermore, at around 10kHz the ParaEq is providing unity gain, whereas the graphic EQ is attenuating the signal by nearly 6dB. This makes the ParaEq a more transparent circuit than the graphic EQ.

This combination of transparency and precision is why recording studio control rooms are dominated by parametric equalizers, and why they're a great choice for creative and corrective EQ on your pedalboard.

Which ParaEq Do You Need?

The original ParaEq has been loved and trusted by musicians on a variety of instruments for over a decade. Both the ParaEq MKII and the ParaEq MKII Deluxe feature a low-noise, transparent signal path that is extremely versatile.

With three fully parametric bands, you can simultaneously achieve broad tonal shaping and precise fine-tuning to sculpt your perfect sound.

The ParaEQ MKII Deluxe will appeal to players who:

Need high-pass and low-pass filters for precision work at the frequency extremes
Want the glorious sound of Bandaxall filters for sparkling high end or extra weight in the low end
Want to be prepared for any EQ situation

Specifications

Input Impedance: 1MO
Output Impedance: 100O
Frequency Response (-3dB): 22Hz - 25kHz
Total Harmonic Distortion: < 0.05%
Noise: > 107dB
Headroom: +30dBu
Input Voltage: 9VDC Centre-Negative
Required Current: 300mA
Power Input Connector: 2.1mm Barrel Connector
Height (Enclosure Only): 1.5"
Height (Including Controls): 2.5"
Length: 3.5"
Width: 4.5"
Weight: 1lb

Notes: The #1 EQ pedal returns - better than ever

Empress Effects have brought back the most sought-after Parametric EQ pedal, with groundbreaking upgrades.

Everything people loved about the original ParaEq was kept, and more fidelity and control have been added.

More Control

Whether you're trying to cut through a mix or fix a feedback issue, you need precision! The ParaEq MKII offers the most control of any pedal EQ on the market.

More Sweetness

Effortlessly sweeten your tone with beautiful sounding, super smooth Baxandall filters for broad high and low frequency shelving adjustments on the Deluxe.

More Power

The ParaEq MKII pedals operates internally at 27V, providing clean headroom without unwanted clipping.

More Purity

This pedal is able to offer the most control without degradation to the tone due to minimal circuit topology00-the opposite of graphic EQs.

Why Choose Parametric EQ over Graphic EQ?
Parametric VS Graphic EQ Graph
Graphic equalizers provide a convenient visual sense of the EQ curve. However, there is a tradeoff in transparency and precision.

The graph here shows the ParaEq MKII Deluxe (cyan) and a 7-band graphic EQ pedal (magenta) both providing a +4dB boost at around 2 kHz. As can be seen, the ParaEq is much more precise in the changes it can make, whereas the graphic EQ affects nearly the entire frequency spectrum. Furthermore, at around 10kHz the ParaEq is providing unity gain, whereas the graphic EQ is attenuating the signal by nearly 6dB. This makes the ParaEq a more transparent circuit than the graphic EQ.

This combination of transparency and precision is why recording studio control rooms are dominated by parametric equalizers, and why they're a great choice for creative and corrective EQ on your pedalboard.

Which ParaEq Do You Need?

The original ParaEq has been loved and trusted by musicians on a variety of instruments for over a decade. Both the ParaEq MKII and the ParaEq MKII Deluxe feature a low-noise, transparent signal path that is extremely versatile.

With three fully parametric bands, you can simultaneously achieve broad tonal shaping and precise fine-tuning to sculpt your perfect sound.

The ParaEQ MKII Deluxe will appeal to players who:

Need high-pass and low-pass filters for precision work at the frequency extremes
Want the glorious sound of Bandaxall filters for sparkling high end or extra weight in the low end
Want to be prepared for any EQ situation

Specifications

Input Impedance: 1MO
Output Impedance: 100O
Frequency Response (-3dB): 22Hz - 25kHz
Total Harmonic Distortion: < 0.05%
Noise: > 107dB
Headroom: +30dBu
Input Voltage: 9VDC Centre-Negative
Required Current: 300mA
Power Input Connector: 2.1mm Barrel Connector
Height (Enclosure Only): 1.5"
Height (Including Controls): 2.5"
Length: 3.5"
Width: 4.5"
Weight: 1lb

Notes: Well on its way to becoming a cult favourite already, Empress's Zoia brings modular synthesis to a compact pedal format. Create effects, synths, controllers or modules to integrate with other instruments.

Supplier's Notes:

The ZOIA is basically a modular synthesizer in pedal form. Instead of being a delay effect or tremolo, the ZOIA provides the modules necessary to build a delay or tremolo from the ground up. But since you're the one building it, you can make it do whatever you want. With the ZOIA you can build your own custom effects, synthesizers, midi controllers, and virtual pedal boards. And to make life a little easier, these modules have been created for all your standard guitar effects. So for instance, if you want a phaser, you can just plop down a phaser. You don't have to break out the textbooks to learn that they're built out of all-pass filters. (Of course, if you're a nerd like us, you can use the ZOIA to build them out of all-pass filters).

Input Impedance: >= 1M ohms
Output Impedance: 100 ohms
Frequency Response (-3dB): 10Hz - 23.4kHz
Total Harmonic Distortion: 0.22%
Dynamic Range: 105.5 dBA
Input Headroom (no pad): +0.5 dBu
Input Headroom (6dB pad): +5.7 dBu
Input Headroom (12dB pad): +10.8 dBu
Output Headroom: +16.2dBu
Power Input Connector: 2.1mm Barrel Connector
Power Input Voltage: 9V DC (center negative)
Required Current: 300mA
Height (enclosure only): 1.75"
Height (including controls): 2.625"
Length: 5.7"
Width: 3.75"
Weight: 1.5lbs

Notes: Immerse yourself and go beyond the boundaries of what is possible with a conventional guitar or synth pedal. GHOST PEDAL brings you new possibilities of tone shaping with its state of the art flexible audio routing chain, allowing you to jump between dimensions with a single press of a button.

From earth shaking subharmonics and distorted drones to angelic shimmer reverbs and anything in between, GHOST is a PEDAL for the adventurous sound designers and the most demanding guitar and synth players. Intuitive UI coupled with hands-on control and preset storage allows you to stay in the now and focus on your performance.

Unique user interface showing parameter values and real-time modulations

Line or high-impedance JFET guitar inputs with cabinet simulator

Full MIDI control over every parameter incl. MIDI clock over LFO and delay

True relay stereo, buffered and trails bypass modes

Bipolar LFO and expression pedal assignments to any parameter

3 reverb and 3 filter types, incl. comb with resonator, six possible routing variations

Reverb freeze, delay looper, spring reverb with virtual spring excite

Three footswitches let you change assignable parameters (tap tempo/freeze/spring excite), select presets and bypass with your feet

Notes: Little box, big reverb. Specially designed for huge, cavernous echo effects and ideal for infinite tails and frozen sounds, the Blackhole is an exceptionally high quality pedal at a very reasonable price.

Supplier's Notes:
Create haunting echoes, ethereal landscapes and otherworldly ambience with Blackhole, a reverb pedal as big and as mysterious as the cosmos. Blackhole takes you there - beyond the ambience of mere earthly Halls, Rooms, Plates or Springs. Blackhole will take you on a journey from cathedral-type spaces to a universe of out-of-this-world soundscapes.

It includes onboard tone controls, modulation, and infinite reverb settings with mono or stereo operation, MIDI control, preset storing, and most importantly a new compact, easy-to-use interface.

Blackhole features two types of infinite reverb. Infinity mode continuously layers new sound on top of a suspended reverb. Freeze mode holds the effect allowing you to play over the reverb tail. The Freeze Footswitch allows instant access to this feature.

Unlike other reverbs which may offer pre or post modulation, Blackhole features modulation built into the reverb structure itself. It's essentially a big multi-voice chorus, with unique tone-shaping ability. You can utilize extreme settings to smooth out the edges.

Like all Eventide pedals, Blackhole allows you to fine tune every aspect of the effect. With a new, user-friendly, intuitive interface, just about anyone can shoot for the moon and land beyond the stars.

Input: 1/4" TRS / Mono = Tip, Stereo = Tip & Ring
Out 1: 1/4" TS Mono / Mono Output
Out 2: 1/4" TS Mono / Stereo Output
EXP: 1/4" TRS / Expression pedal, Aux Switch or MIDI I/O
Mono/Stereo Switch: Sets Input to Mono (Tip) or Stereo (Tip + Ring)
Guitar/Line Level Switch: Optimizes internal gain structure
Mini USB Software updates, MIDI I/O
DC Input Jack: 5.5mm / 2.1mm plug / Center Negative (-)

Input Impedance: 700k ohms Mono, 990k ohms Stereo
Max Input, Guitar: +8dBu
Max Input, Line: +14dBu
Output Impedance: 220 ohms
Recommended Load Impedance: 10k ohms

Power: 9V DC @ 200mA / Center Negative (-)
Dimensions (product): 4" W x 4.25" D x 1.68" H / 102 mm x 108 mm x 43 mm
Weight (product): 1.06 lb / 0.48 kg
Dimensions (package): 7.7" W x 4.75" D x 2.8" H / 178 mm x 121 mm x 71 mm
Weight (package): 1.68 lb / .77 kg

Notes: The Eventide H9 Max features 45 algorithms and 99 factory presets from Space, TimeFactor, PitchFactor and Modfactor. More Presets are available via the H9 Control app and offer a huge range of effects; you may never need another stomp box again.

The H9 Max Stomp Box is fully controllable via its simple front panel one-knob user interface, but can also be controlled via a free iOS app, H9 Control, which can be downloaded to your iPhone or iPad for live editing, creating and managing presets and changing system settings wirelessly via Bluetooth. H9 Control is also available for your Mac and PC via USB.

The Eventide H9 features stereo audio I/O, MIDI I/O, Expression Pedal, and Auxiliary Switch inputs.

The H9 comes loaded with a set of Eventide's most popular algorithms taken from their award winning stomp boxes:

From ModFactor:
- Liquid Chorus
- Organic Chorus
- Shimmer Chorus
- Classic Chorus
- Phase XO Chorus
- Bias Tremolo
- Opto Tremolo

From PitchFactor:
- H910
- H949
- Crystals
- Tuner

From TimeFactor:
- Tape Echo
- Vintage Delay

From Space:
- Shimmer
- Hall

Notes: ***B-STOCK: Box opened, light surface marks, product in perfect working condition ***


The Eventide H9 Max features 45 algorithms and 99 factory presets from Space, TimeFactor, PitchFactor and Modfactor. More Presets are available via the H9 Control app and offer a huge range of effects; you may never need another stomp box again.

The H9 Max Stomp Box is fully controllable via its simple front panel one-knob user interface, but can also be controlled via a free iOS app, H9 Control, which can be downloaded to your iPhone or iPad for live editing, creating and managing presets and changing system settings wirelessly via Bluetooth. H9 Control is also available for your Mac and PC via USB.

The Eventide H9 features stereo audio I/O, MIDI I/O, Expression Pedal, and Auxiliary Switch inputs.

The H9 comes loaded with a set of Eventide's most popular algorithms taken from their award winning stomp boxes:

From ModFactor:
- Liquid Chorus
- Organic Chorus
- Shimmer Chorus
- Classic Chorus
- Phase XO Chorus
- Bias Tremolo
- Opto Tremolo

From PitchFactor:
- H910
- H949
- Crystals
- Tuner

From TimeFactor:
- Tape Echo
- Vintage Delay

From Space:
- Shimmer
- Hall

Notes: Five decades of sound processing expertise distilled into a compact multi-effects pedal. Huge processing power derived from the H9000 Harmonizer, featuring classic algorithms and new effects.

***H90 Control app announcement - February 2024 ***

Eventide Audio has announced the immediate availability of the H90 Control iPad app Release 1.7.6, which enables Bluetooth functionality. H90 Control provides remote control access and Program list management for the H90 Harmonizerr pedal. The app lets users manage Program and Preset settings, perform system updates, and import/export User Lists with an easy-to-use interface, all now with the convenience of Bluetooth connectivity.

The release also implements a new Bypass mode in System Settings - "AB Only" - which allows users to bypass just the onboard effects, leaving insert routings active. It also adds support for full user content
backup/restore and log retrieval in H90 Control.

H90 Control for iPad is available for free download from the Apple App Store.

For H90 users who have updated their H90 firmware to 1.7.4+, H90 Control Release 1.7.6 for MacOS and Windows adds Backup/Restore for user content (Programs, Lists, Presets) and system settings.

H90 Control for Mac and Windows is only available for H90 owners who have registered their H90 pedal.

Supplier's Notes:
Beyond the Effect Horizon

The H90 Harmonizer is Eventide's next-generation multi-effects pedal. Whether you want high-quality bread and butter effects or experimental sounds unheard, the H90 has everything you need to inspire your creativity with an intuitive UI designed with players in mind. Discover why top artists and producers have chosen Eventide through the years with 62 effect algorithms and hundreds of Program combinations curated for a variety of instruments and genres. With its comprehensive I/O and flexible routing options, the H90 is designed to be the heart of your rig.

New Technology, New Effects

H90 Harmonizer features modern ARM-based architecture derived from the world's most powerful effects processor, Eventide's flagship H9000 Harmonizer. This paves the way for the ongoing creation of more advanced effects processing techniques. As a result, the pedal not only offers the iconic reverbs, delays, modulation, and pitch shifting effects of the H9 Max but goes far beyond with 10 new powerful algorithms including state-of-the-art, fast-tracking, and warble-free Polyphonic Pitch Shifting. Eventide's proprietary SIFT (Spectral Instantaneous Frequency Tracking) technology clears the road ahead for next-gen effects both long imagined and unimaginable.

Live Performance Machine

The H90 Harmonizer is a live performance powerhouse! The front panel has been reimagined with five push knobs, seven LED buttons, and a hi-res OLED display for greater hands-on control and parameter feedback. Two large push knobs allow you to switch between SELECT, BANK, and PERFORM modes with ease. In PERFORM mode, you get six programmable footswitches. Map functions like tap tempo, preset, insert bypass or momentary states; use them to engage options like reverb freeze, pitch flex, or delay repeat; make multiple instantaneous parameter changes with three Hot Switches .The comprehensive UI allows you to control any parameter with ease. Adjust expression mappings by hand with the PERFORM HotKnob and engage up to six individual assignable parameters with the three push-button Quick Knobs. Get even more control with two inputs for expression pedals or auxiliary switches with up to three buttons. If that wasn't enough, take advantage of the pedal's extensive MIDI control. The H90 comes with hundreds of factory Programs which can be loaded using either SELECT or BANK mode. In SELECT mode, you can navigate your Playlist sequentially without ever missing a detail thanks to the OLED display. In BANK mode, you can quickly load from a bank of 3 Programs, perfect for cueing up a range of sounds for a song. Organizing your favourite sounds has never been easier, simply load a new Playlist and you're ready for the next gig!

Specifications

Inputs 1 - 4: 14 inch TS mono jack
Outputs 1-4: 14 inch TS mono jack
Exp/Ctl 1-2: 14 inch TRS / Expression pedal or Aux Switch
USB Type-C: Use USB 2.0 for control, updates, and MIDI
MIDI In: Five-pin DIN (Female)
MIDI Out/Thru: Five-pin DIN (Female)
DC Input Jack: 5.5/2.5mm plug / Center Positive (+)
Input Impedance (Inst. Level: >600k ohms
Input Impedance (Line Level): >80k ohms
Output Impedance: 220 ohms
Recommended Load Impedance: 10k ohms
Maximum Input Level (Inst): +4dBu
Maximum Input Level (Line): +14dBu

Power
12V DC @ 1A / Center Positive (+), 5.5/2.5mm jack

Dimensions (Product)
English: 6.5" (W) x 5.25" (D) x 2.5" (H)
Metric: 170 (W) x 136 (D) x 68 (H) mm

Dimensions (Package)
English: 10.5" (W) x 7" (D) x 3" (H)
Metric: 265 (W) x 180 (D) x 75 (H) mm
Weight (Product): 1.85 lbs / 0.84 kg
Weight (Package): 3 lbs / 1.36 kg
Shipping Contents: H90, Eventide Sticker, 4x Rubber feet, Guitar pick, Universal power supply with plugs (US, UK, EU, AUS), USB A to Type-C cable, Quick Reference Guide

Notes: Eventide's legendary MicroPitch effect, as found in the H910 and H949 Harmonizers, packaged into a compact pedal format, suitable for guitar, bass, synth and other line level signals.

Supplier's Notes:
Savor the secret sauce simmered into countless hit records with the MicroPitch Delay Pedal. By utilizing subtle pitch shifts to create a rich stereo spread, MicroPitch Delay makes anything you cook up sonically delectable. This pedal is the key ingredient for serving up flavorful tone: Instantly harness soaring leads that jump out of the mix, add distinct lushness to a compelling clean passage and get your fill of vibey modulation that's sure to sweeten any pot with the push of a button.

Sample a bite of the newly baked up Positive and Negative Envelope modulation sources and you'll be sure to come back for seconds; and major and minor thirds. MicroPitch Delay adds unparalleled dimension to any source; it's not just a guitar pedal.

Use it to thicken vocals, keyboards, drums, strings, brass, winds and more.

What's the recipe for the MicroPitch Delay pedal? It's a unique flavor profile of dual pitch-shifters with fine-resolution de-tuning and modulation combined with delay in a delicious red package. The pedal is the latest incarnation of a legendary effect that originated in the H910 and H949 Harmonizers, and later popularized with the H3000. It can be utilized for chorusing and savoury repeating delays. It's a creative sonic design tool. It's effective whether used subtlety as a thickening tone-enhancer or dialed to the extremes for special effects. The simplicity of the pedal's ability to make things sound bigger is what makes it so tasty! With the MicroPitch Delay pedal, you can easily harness the power of this iconic Eventide effect that helped shape musical history.

The MicroPitch Delay algorithm has been a mainstay of audio production and musical performance since it was first introduced within the legendary H910 and H949 effects processors. Its subsequent appearance in the H3000 Harmonizerr further popularized the effect and cemented its place in musical history as a quintessential studio tool. Now players can harness the power of this iconic Eventide effect with the MicroPitch Delay pedal, which offers a unique combination of dual pitch-shifters with fine-resolution de-tuning, delay and modulation - including new positive envelope and negative envelope modulation sources. Its distinctive architecture yields a wide breadth of sonic applications ranging from subtle tone thickening to creating a rich stereo spread to a host of creative sound design special effects. The rugged, gig-ready red MicroPitch Delay pedal is not just for guitars the pedal brings unparalleled dimension to any source from vocals to keyboards to drums, strings, brass and winds.

Users can choose from dozens of Eventide presets to load via MIDI, which are also accessible in the preset list on the Eventide Device Manager (EDM - a Windows or Mac OS X application for software updates, system settings and creating/saving presets).

The pedal can store up to 127 presets in memory, with five presets loaded at a player's feet for access from a latching/momentary dual-action Active Footswitch with a Catch-up mode to help players dial in their sound when toggling between presets/parameters. A single Aux switch can be deployed to Tap Tempo, or a triple Aux switch can be used for easy preset changing (up/down/load). The MicroPitch Delay Pedal offers multiple Bypass options: Buffered, Relay, DSP+FX or Kill dry. MIDI capability is available over TRS (for use with a MIDI to TRS cable or converter box) or USB. The rear-panel Guitar/Line Level switch allows level-matching with guitars, synths, FX loops or DAW interfaces. Any combination of MicroPitch Delay parameters can be mapped to an Expression pedal.

Notes: Eventide's Riptide pedal is the result of extensive research into overdrives and Uni-vibes. With stereo overdrive and Vibe, each effect features dual voicings versatile enough for funky bright tones to explosive and warm lead tones.

The Vibe knob delivers classic Hendrix-style Uni-Vibe to full-on vibrato perfect for modern soul and lo-fi tones. With the power to engage each effect individually, swap the order, and store presets, Riptide makes it easy to get caught up in the excitement.

Drive features a balanced distortion with superb dynamics and touch sensitivity. Use the "Green" voicing for a classic transparent overdrive or activate the "Red" voicing for a tight modern overdrive.

Features:

Five presets loaded at your feet with dozens more available by software update in Eventide Device Manager
Dual-action Active Footswitch is latching or momentary
Rear panel Guitar/Line Level switch for matching impedances with guitar, synths, FX loop, or DAW interface
Map any combination of parameters to an Expression Pedal
Use a single Aux switch to Tap Tempo or a triple Aux switch for easy preset changing
MIDI over TRS capable
Multiple Bypass options: Buffered, Relay, DSP+FX or Kill dry
Catch-up mode helps dial in your sound when toggling between presets/parameters
Eventide Device Manager PC or Mac application for software updates, system settings and creating/saving presets

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Effects masters Eventide serve up a lush bucket brigade chorus inspired by the analogue classics of the 70s and 80s. Three chorus voices plus MicroPitch detuning for stereo width and complexity.

Supplier's Notes:
Short Description: Stereo Bucket Brigade-style Tri-Chorus with Psychedelic Swirl; Eventide's lushest chorus ever! Product copy: Deep Modulation & Dreamy Textures

Inspired by the classic Tri-choruses and stompbox choruses of the 1970s and early 1980s, the TriceraChorus pedal pairs rich Bucket Brigade-style chorusing with Eventide's legendary MicroPitch detuning for a lushness that rivals the jungles of the late Cretaceous Period. TriceraChorus features three chorus voices and three unique chorus effects which can be used to create a wide stereo spread with pulsing waves of modulation. The innovative "Swirl" footswitch adds psychedelic flanging, phasing and Univibe-style tones. It has never been easier to dial in syrupy smooth deep modulation on guitar, bass, synths, strings, vocals and more.

Deep Modulation & Dreamy Textures

TriceraChorus has three chorus voices: Left, Center, and Right, which can be detuned to add even more depth. A three-phase LFO modulates the delay times for these voices, producing a dazzling movement across the stereo field. The combination of the three modulated delays creates a huge wash of chorus reminiscent of that big, dreamy '80s sound.

A Trifecta of Tone

Like the mighty three-horned Dino, TriceraChorus is a powerhouse of chorus offering three effect types complemented by detuning and Swirl. For a quintessential vintage chorus sound, set TriceraChorus to "Chorus" mode. If you need something with more complexity and movement, "Chorale" produces lush, heavenly choruses inspired by classic rackmount Tri-chorus units. For a more warbly, pulsing effect, try "Vibrato." Add detune for subtle pitch shifting sweetness. Engage the "Swirl" footswitch to get lost in a whirlpool of kaleidoscopic sound.

Notes: Multi-tap delays go next-level with Eventide's incredible heritage distilled into this compact pedal format. Line level options allow you to process synths, drums, guitars and just about any other signal.

Supplier's Notes:
A Multiverse of Tone UltraTap is a unique multi-tap effect pedal capable of rhythmic delays, glitchy reverbs, huge pad-like volume swells, and extraordinary modulation.

It's the perfect tool for staccato leads, swelling chords, and other evolving effects - everything from reversed reverbs to the sound of ripping it up in the Grand Canyon!

Think of UltraTap as the mother of all Echoplexes and you won't be too far off.

That's basically how it operates but with the flexibility to add as many 'tape heads' as you want and expressively control their positions and levels.

UltraTap's controls make possible new and unexpected effects. The controls that you would expect in a multi-tap delay pedaliNumber of Taps, Delay and Feedback- are just the basics.

Controls for Spread, Slurm, and Chop open up a new world of possibilities.

Effect Features:

"Slurm" An exclusive and innovative control that smears/slurs taps together to create truly unique reverbs and choruses.

"Chop" and "Spd/Rise/Rel" combine to allow unusual and expressive modulation of the taps based on LFO shapes or the audio's envelope.

"Feedback" unlocks further tone shaping capability.

"Taps" selects up to 64 taps to create simple repeats or morph delays into chorus and reverb.

"Spread" controls the 'distance' between' taps. With the knob centered, the taps are equally spaced, turn clockwise and the later taps are bunched together, counterclockwise and the early taps are bunched together. Use this control to dial in the perfect rhythmic space between taps.

Onboard LFOs and envelopes to chop the sound source into stuttered rhythms.

"Tap Footswitch" allows you to set the tempo of the taps.

Connectors:

Input: 1/4" TRS / Mono = Tip, Stereo = Tip & Ring
Out 1: 1/4" TS Mono / Mono Output
Out 2: 1/4" TS Mono / Stereo Output
EXP: 1/4" TRS / Expression pedal, Aux Switch or MIDI I/O
Mono/Stereo Switch: Sets Input to Mono (Tip) or Stereo (Tip + Ring)
Guitar/Line Level Switch: Optimizes internal gain structure
Mini USB: Software updates, MIDI I/O
DC Input Jack: 5.5mm / 2.1mm plug / Center Negative (-)

Analog I/O:

Input Impedance: 700k ohms Mono, 990k ohms Stereo
Max Input, Guitar: +8dBu
Max Input, Line: +14dBu
Output Impedance: 220 ohms
Recommended Load Impedance: 10k ohms

Specifications:

Power: 9V DC @ 200mA / Center Negative (-)
Dimensions (product): 4" W x 4.25" D x 1.68" H / 102 mm x 108 mm x 43 mm
Weight (product): 1.06 lb / 0.48 kg
Dimensions (package): 7.7" W x 4.75" D x 2.8" H / 178 mm x 121 mm x 71 mm
Weight (package): 1.68 lb / .77 kg

Notes: The Aether is a modulating delay pedal.

The initial vision for the design of The Aether came shortly after the release of the Wardenclyffe Deluxe. The intention was to take design the philosophies and incorporate tonal characteristics that made the Wardenclyffe so special, but this time as a delay pedal.

At the heart of The Aether is a PT2399, tap tempo delay. It has the standard Echo, Feedback, and Time controls you would expect on any delay, but what makes it special is the Color, Saturation, and Degrade Controls. The Color toggle completely changes the character of the Aether and has two voices: Warm Analog and Bright Tape. The Saturation knob is a gain adjustment that overdrives the delay chip. The Degrade toggle adds lofi textures and artifacts to the delay line. The Degrade toggle removes a very vital section of the delay circuitry that keeps the delay stable with longer delay times. As you increase the delay time, the artifacts become more present and lofi.

The Aether uses a simple, but versatile modulation LFO core inspired by the Wardenclyffe, but with more features. The LFO cores sets it apart from other modulated delays out there. The speed of the modulation core can be set 3 different ways: Rate knob, tap tempo tact switch, and Sync toggle. When the Sync toggle is set to its middle position, the LFO can run at whatever speed you want. When the Sync toggle is in the up position it is synced to the delay time. When the Sync toggle is in the down position, it is synced to delay time, but in half-time for slower evolving moduation. The Shift knob determines the depth of the modulation; this has plenty of range in case you want to get really obscene. The Stray toggle changes the LFO from a typical Sine wave to a Slewed Random waveform. Creative exploration of the modulation section of The Aether is strongly encouraged. The way the delay rate and LFO rate interact with each other can yield very creative results.

Notes: The Collective is a brand new fuzz pedal designed by Hungry Robot. The Collective is an over-designed, complex fuzz pedal, a true desert island fuzz designed to please the most ardent fuzz connoisseur. The Collective covers a lot of ground with plenty of external controls as well as over a DOZEN internal parameters to narrow down that perfect fuzz tone. The Collective is a pedal that requires and encourages exploration. The Collective has three fuzz circuits in one box. On top of that there is a 2-band State Variable Filter and a chatotic feedback loop.

Starting at the top of the pedal, the "Conventional" knob is a traditional sounding fuzz. This is meant to balance out the more chaotic fuzz tones and provides a bread-and-butter sound when you need it. The "Low Spectrum" and "High Spectrum" knobs are part of an active State-Variable Filter, similar to the one found on The Lumen. The "Synthetic" knob is a logic based CMOS fuzz that can be described using the words, velcro-ey, synth-ey, gate-ey, and glitch-ey. The "Pristine" knob allows you to blend in your clean signal when you need a bit of pureness to balance out the crazier sounds. On the left is the "Overload" knob. This controls the amount of signal let back through an internal feedback loop. The output of the fuzz is fed back into the input causing self-oscillation and some gnarly textures. Underneath the knob is a dedicated momentary footswitch to activate the feedback loop or you can latch the feedback loop ON by flipping the toggle switch up. On the right is the "Submerge" knob. This is a monophonic sub-octave fuzz. Similar to the "Synthetic" fuzz, this is also CMOS-based, so similar gated, unstable tones. The "Submerge" also has a dedicated momentary footswitch to add in the sub-octave with its own toggle switch that can latch the sub-octave.

Controls

Conventional: Adjusts the volume of the Conventional Fuzz
Synthetic: Adjusts the volume of the Synthetic Fuzz
Pristine: Adjusts the volume of the clean signal.
Overload: Controls how much feedback is looped back into front end when Overload is active.
Latching Toggle Next to Overload: Latches the Overload effect ON when up. When down, the effect is bypassed.
Footswitch Below Overload: Momentary control of Overload effect. Does the opposite of what the Toggle Mode is set to.
Submerge: Amount of Submerge, monophonic sub-octave is sent to the output.
Latching Toggle to Submerge: Latches the Submerge effect ON when up. When down, the effect is bypassed.
Footswitch Below Submerge: Momentary control of Submerge effect. Does the opposite of what the Toggle Mode is set to.
Middle Footswitch: Master Bypass

Technical specifications:

Current Draw: 97 mA
Dimensions: 5.7" x 4.7"
Powering: 9V DC - Negative Center - 2.1mm Barrel

Notes: The Moby Dick V2 brings up to date one of the first pedals that put Hungry Robot on the map. The original Moby Dick is well known for its chimey, tape-emulating delay line with slight lo-fi imperfections and subtle modulation; a "back-to-basics" delay in the world of multi-mode DSP delays.

The V2 has an obviously smaller footprint, but the most exciting changes lie in the circuit updates. When working on the V2, Hunry Robots wanted to further explore the sonic capabilities of the Moby Dick tape-emulation, rather than a miniature version of the pedal- specifically in a lo-fi, wrecked-tape context.

One of the magical qualities of recording to tape is the lovely saturation. The original Moby Dick had a gritty, saturated quality, but in the V2, this quality was pushed to its limit. A "Lo-Fi" knob which allows you to dial in additional tape saturation to the delay line. This is done by applying pre-gain amplification to the front end of the delay chip, resulting in a wonderfully organic character when gain is applied.

The capabilities of the modulation were also expanded. The original Moby Dick had a very subtle chorusing effect. Though it sounded great, it was admittedly subtle. The V2 increases the modulation depth dramatically, allowing it to travel beyond subtle chorusing into more extreme pitch bending territory. The "Mod" in conjunction with a cranked "Lo-Fi" knob creates the most amazing broken tape-deck quality, but when these knobs are dialed back it retains the overall character of the original.

Current Draw: 30 mA

Switching: True-Bypass

Dimensions: 4.7" x 2.6" x 1.5"

Delay Time: Approximately 1000ms

Powering: 9V DC - Negative Center - 2.1mm Barrel

Notes: The Wash is a dream come true for ambient player and ushers in a new chapter in the world of delays. It accomplishes the arduous task of creating an organic, below-the-mix wash. Normally this requires stacking 3-4 reverb and delay pedals at the end of your chain. The unique "Wash Circuit" creates the perfect wash with only one pedal.

For the new version (V2), Hungry Robots worked hard to squeeze the circuit into a smaller enclosure while keeping the build quality and tone quality identical. The circuit that hundreds of users have fell in love with is unchanged. The new versions are 2 inches smaller left and right. In addition to the smaller enclosure, the new option for top mounted jacks can save you a lot of board space.

At its most basic utility, The Wash is an outstanding analog-voiced, tap-tempo delay with just over 1000ms of delay time.

The Wash circuit is what makes the pedal stand out from other delays on the market. The Wash circuit adds reverb to the signal and through a complicated network of internal feedback loops, subtle multi-head Binson effect, and what is known as "ripple effect," It works to add a hauntingly beautiful wash to your signal in ways that can't be accomplished by stacking a reverb and a delay in series. It does all of this while keeping the clarity and presence of your original signal without getting lost in the soup of decay.

The Wash reacts to your playing unlike the common DSP reverb/delays with an infinate sustain function. There is a dynamic quality to it that is hard to replicate with any other single pedal.

The "Ripple" knob controls The Ripple Effect. The Ripple Effect is a feature in which each successive delay trail slowly scatters and transforms into reverb. The "Resonance" knob is to fine-tune the resonance and decay of the wash. The Middle "The Wash" knob controls the mix/level of the wash.

Current Draw: 92-93 mA

Switching: True-Bypass

Dimensions: 4.7" x 3.7" x 1.96"

Powering: 9V DC - Negative Center - 2.1mm Barrel

Notes: It's time to break free

Bring your perfect studio guitar sound onstage with the new AmpliTube X-TIME delay pedal. This boutique pedal features 16 all-new delay effects leveraging IK's latest AmpliTube technologies, accompanied by an exclusive virtual X-GEAR version of the exact same effects. Use the virtual version with AmpliTube 5 (SE version included) to record and tweak settings and save as presets on your X-TIME pedal for world-class tone anywhere.

Best-in-show DSP

AmpliTube X-TIME leverages IK's latest technologies for hyper-realistic emulations of real-world gear. The state-of-the-art DSP onboard offers 16 high-end algorithms, while a special X-MODE opens additional infinite-feedback effects. All combined, X-TIME delivers amazing clarity to the stage with the realism and response that users love about AmpliTube 5.

Hardware that stands out

For AmpliTube X-TIME, great effort was made to guarantee your tone stays as pure and pristine as possible, no matter how simple or sophisticated your signal chain becomes.

Industry-leading integration

AmpliTube X-TIME includes a matching virtual version for Mac/PC and a copy of AmpliTube 5 SE. Open any version of AmpliTube 5 and you'll find your virtual X-TIME pedal available as a stomp for use within the program. Adjust any of your pedal settings with the convenience of AmpliTube's award-winning workflow and save them as presets. The X-GEAR Librarian lets you move presets between X-GEAR pedals and AmpliTube and easily reorganize them on the hardware pedal. You can store up to 300 presets per pedal.

All-in-one recording

With AmpliTube X-TIME there's no need for any other gear when it comes to recording guitar. The X-TIME features an USB audio interface and some must-have recording features right onboard.

5Hz to 24kHz frequency response to record the full range of your guitar or bass
Versatile routing options let you send the wet or dry signal to your DAW
Stereo out for monitoring sound between the X-TIME pedal and your computer
Full MIDI implementation to map control

From soundcheck to final encore

When it's time to play out, AmpliTube X-TIME holds everything you need to perform at your best. In fact, you can even leave your amp and cab at home, if you want to.

Fast, intuitive interface and control knobs to tweak your sound on the fly
High-contrast LED display keeps you informed on everything, indoors and out
Expression pedal input adds additional control over any parameter you choose
Full MIDI implementation is built-in for even the most complex setups
5 cabinet impulse responses let you connect directly to a powered cab or PA

With great tone comes great portability

With its open architecture for future updates, AmpliTube X-TIME will empower you no matter where you are and for years to come. Experience the freedom of moving between the studio and stage seamlessly, confident that you and the audience hear your sound exactly as you created it to be.

Notes: It's time to break free

Bring your perfect studio guitar sound onstage with the new AmpliTube X-VIBE modulation pedal. This boutique pedal features 16 all-new modulation effects leveraging IK's latest AmpliTube technologies, accompanied by an exclusive virtual X-GEAR version of the exact same effects. Use the virtual version with AmpliTube 5 (SE version included) to record and tweak settings and save as presets on your X-VIBE pedal for world-class tone anywhere.

Best-in-show DSP

AmpliTube X-VIBE leverages IK's latest technologies for hyper-realistic emulations of real-world gear. The state-of-the-art DSP onboard offers 16 high-end algorithms, while a special X-MODE opens additional hyper-modulation effects. All combined, X-VIBE delivers amazing clarity to the stage with the realism and response that users love about AmpliTube 5.

Hardware that stands out

For AmpliTube X-VIBE, great effort was made to guarantee your tone stays as pure and pristine as possible, no matter how simple or sophisticated your signal chain becomes.

Ultra-low noise, 24-bit/192kHz converters for class-leading sound quality
5 Hz-24 kHz frequency response to capture the full scope of your guitar's sound
112 dB dynamic range provides whisper-quiet operation at any gain setting
Selectable true or soft bypass for maximum control

Industry-leading integration

AmpliTube X-VIBE includes a matching virtual version for Mac/PC and a copy of AmpliTube 5 SE. Open any version of AmpliTube 5 and you'll find your virtual X-VIBE pedal available as a stomp for use within the program. Adjust any of your pedal settings with the convenience of AmpliTube's award-winning workflow and save them as presets. The X-GEAR Librarian lets you move presets between X-GEAR pedals and AmpliTube and easily reorganize them on the hardware pedal. You can store up to 300 presets per pedal.

All-in-one recording

With AmpliTube X-VIBE there's no need for any other gear when it comes to recording guitar. The X-VIBE has a USB audio interface and some must-have recording features right onboard.

5Hz to 24kHz frequency response to record the full range of your guitar or bass
Versatile routing options let you send the wet or dry signal to your DAW
Stereo out for monitoring sound between the X-VIBE pedal and your computer
Full MIDI implementation to map control of AmpliTube and/or any compatible DAW

From soundcheck to final encore

When it's time to play out, AmpliTube X-VIBE holds everything you need to perform at your best. In fact, you can even leave your amp and cab at home, if you want to.

Fast, intuitive interface and control knobs to tweak your sound on the fly
High-contrast LED display keeps you informed on everything, indoors and out
Expression pedal input adds additional control over any parameter you choose
Full MIDI implementation is built-in for even the most complex setups
5 cabinet impulse responses let you connect directly to a powered cab or PA

With great tone comes great portability

With its open architecture for future updates, AmpliTube X-VIBE will empower you no matter where you are and for years to come. Experience the freedom of moving between the studio and stage seamlessly, confident that you and the audience hear your sound exactly as you created it to be.

Notes: The Archer Ikon is sort of a 2 in one guitar pedal. It can be used as just a clean boost by turning the gain all the way down. As you introduce gain it will attenuate the clean signal but there is a magical blend in between that you will find. Please experiment!!

Dimensions: 4.00" x 2.30"

9 volt Negative tip adaptor and a 5.5mm x 2.1mm jack.

9 volt Battery

Buffered Switching

Notes: Based on the classic tones of bearded Texas legend Billy Gibbons (ZZ Top), El Hombre is the ideal overdrive for those feeling the blues or ready to rock all night. Capturing the nuances and touch sensitivity of an amplifier, El Hombre can go from mild to wild with the turn of the gain knob showing its versatility with each guitar plugged into it. From added harmonics to chewy sag El Hombre has it all. The El Hombre is simple in format but complex in its abilities. The tone section is highly effective allowing you to alter the drive style simply by adjusting the "Bite" control. When you bring the bite control up (Clockwise) it becomes more aggressive, turn it down (counterclockwise) making it smoother and more reminiscent of Dumble tones.

Notes: The Golden Boy Mini - the epitome of versatile and transparent overdrive, designed in collaboration with the renowned guitarist Joey Landreth. With its exceptional harmonic detail and abundant headroom, this compact overdrive pedal takes the concept of transparent overdrive to new heights, using a simple and powerful interface.

The Golden Boy Mini is the perfect addition to any guitarist's arsenal, allowing you to shape and enhance your tone in ways you've never imagined. Its transparent nature ensures that your core tone remains intact, while adding a dynamic of warmth, richness, and depth that elevates your playing to new levels.

Its intuitive controls allow you to dial in the perfect blend of overdrive, from subtle grit to soaring, harmonically rich tones. The pedal's wide-ranging gain control ensures that it can adapt to any musical style or genre, whether you're playing delicate fingerpicked melodies or unleashing blistering solos. Pair it with Asymmetrical or Led Clipping and put the final touches with it's 3-band Baxandall-style EQ.

Beyond its exceptional sound, the Golden Boy Mini is built to withstand the rigors of the road. Its rugged construction and top-quality components ensure reliability and durability, making it a reliable companion for both studio sessions and live performances.

Whether you're a seasoned professional or an aspiring guitarist, the Golden Boy Mini will transform your tone and ignite your creativity.

Discover the Golden Boy Mini and unlock the true potential of your guitar tone. Order yours today and witness the power of transparent overdrive like never before. Elevate your sound and embark on a sonic journey with the GOLDEN BOY Mini!

Notes: The HOUR GLASS Dual Compressor Pedal - Unlock timeless sustain and endless creativity with dual, independent circuits inspired by the legendary Ross compressor.

It is your ticket to extended sustain and unparalleled tonal control.

From warm, natural compression to soaring sustain, the HOUR GLASS opens up a world of sonic possibilities for you to explore.

Choose from Fast, Medium, or Slow Attack time options to tailor the HOUR GLASS's response to your playing style, and use the Treble toggle switch to select Flat, Medium, or High boost options to help shape your high-frequency tones.

Set one compressor for your single coil guitars, the other compressor for humbucker guitars and have precise tone and dynamic shaping when you switch guitars! Both compressors can also be engaged simultaneously for endless sustain!

Discover the freedom of expression with two independent circuits, that maintain the transparency of your guitar's tone. Precision controls for Level, Sustain, and Blend on each circuit allow you to sculpt your sound exactly as you desire. Built to withstand the rigors of time and the road, the HOUR GLASS is your reliable companion on every musical journey.

Unleash your creativity, transcend genres, and experience endless sustain with the HOUR GLASS Dual Compressor Pedal - Where Sustain has No Boundaries!

Notes: All the reverb and analogue-style delay you could wish for in a single pedal thanks to this killer all-rounder. Separate foot switches for reverb and delay on/off, with optional true bypass or 'trails' setting.

Supplier notes:
The Caverns Delay Reverb V2 dual-effect pedal combines delay and reverb for the perfect end to any pedal board. It features Keeley's analog-style tape delay with modulation options. The 650ms of warm delay combine with Spring, Shimmer or Modulated Reverb. Caverns now comes with a True-Bypass or Trails option. Because of its small and compact design, the New Caverns is a perfect fit for any fly-rig or small board where you have tight space requirements. The New V2 features Keeley's most popular time-based effects, blended perfectly via a design fine-tuned for over 2 years. Simply put, it will be an amazing addition to any board.

The Reverb side of the pedal features 3 cavernous sounds:

Spring Mode - Blackface Amp style spring reverb with F Style Tremolo
Modulation Mode - Choral modulation to the reverb for a huge, cavernous space
Shimmer Mode - Reverb with emphasis on octave-up voices in the reverb trails

The Delay side of the pedal incorporates Keeley's popular Magnetic Echo circuit, which is designed to emulate analog tape delay lines. Three way switchable modulation gives you options for adding Wow and Flutter to the repeats. Perfectly voiced echoes sit well in the mix, either clean or with distortion.

The New Caverns Delay Reverb V2 builds on the old Caverns pedal by giving players a more open and logical control layout with more space between the foot switches.

Top-Mounted Jacks allow for a compact pedalboard layout.

True-Bypass or Trails option gives you the freedom to create huge caverns of sounds and lets them ring out even after you turn the pedal off. Our buffers are engineered to retain your tone and to feed your amplifier a full-strength signal.

The New Caverns Delay Reverb V2 is entirely built in the US. Keeley's veteran crew builds the most reliable and road-worthy gear.

Use 2 TRS Breakout cables for effects patching or to use the Caverns with a pro switching system.

Notes: The Keeley Compressor is the most popular boutique compressor in the world.

The Keeley Compressor Plus is the first true advancement in Keeley's 2 and 4 knob compressor line. The new features are simple and straight forward. Now, there is a simple Release Switch that is tuned for single coils or humbuckers. No more wondering if you have the attack or release set right. Your humbuckers will have all the attack and punch that they should. The Tone Control was also added, which emphasizes the most sensitive harmonics that can be lost in compression. The Compressor Plus now sports a Blend Control that retains the peaks in your playing and, more importantly, the proper phasing of your guitar signal. The Keeley Compressor Plus offers the same gorgeous push of frequencies and sweetening of tone that the old comps gave you, now with the flexibility to easily handle any instrument.

The Keeley Compressor Plus is a compressor with an expander/sustainer. Not only does it act as a regular compressor, limiting the peaks in your playing, it adds more and more gain as notes fade out. Now you have sustain. Nothing worse than a note or a bend that has died before its time. The Keeley Compressor Plus adds just the right amount of sustain and expressive bloom to your notes.

The new Release Switch on the Keeley Compressor Plus is designed to make it very easy to transition between single coil and humbucker guitars. Humbuckers have more average energy than single coils which can cause compressors to stay in "compression mode" for a lot longer. When this happens, any series of notes you play will sound dull. With the quick release of the new Compressor Plus, your humbuckers remain true sounding, and each note retains dynamic attack and definition.

The Tone Control is Keeley's own design taken from analog delays and other vintage effects. Those effects used an emphasis circuit to recover treble and highs after they went through the BBD or other analog delay lines. That circuit was then taken and made it into a full fledged tone controll- it is the perfect way to gently add back in those highs lost in the compression process.

The Blend Control is a way of getting the peaks to come through while having sustain at the same time. So if you want sustain more than peak-limiting, this style of Manhattan Compression is for you! Keep all the peaks and transients with the Blend and Tone Controls while adding sustain on the back end. Heaven!

This compressor isn't just for heavy funk or chicken pickin' anymore.The new Compressor Plus is for players wanting a smooth, subtle wash from their guitar. Remove just the right amount of peaks for an ambient layer and then blend in the right amount of treble for a nice shimmer to your guitar. Use with your favorite fuzz to create a wall of tone like you've only heard on records. Looping has never been easier than with this compressor. Consider it an essential tool when creating loops that sound well-balanced. Forget it all and use the Compressor Plus for the best amp boost you've heard. Nothing pushes an amp better than the Keeley Compressor Plus.

Notes: Drawing on the classic Boss DS-1 and 'Civil War' Big Muff, the Angry Orange serves up two iconic flavours of distortion and fuzz, plus two hybrid modes via a combination of tone control and clipping settings.

Supplier's Notes:
4-in-1 DS-1 and Civil War Big Muff Style Distortion and Fuzz

Keeley crammed two legendary distortion and fuzz circuits into one stompbox and gave you two new sounds in the process. It's sort of like pedal-modeling except these are 100% old-school, analogue circuits and you decide which tone control or clipping section you want to rock.

Heavily saturate your guitar through either a legendary '78 Japanese Orange Distortion or a '91 Soviet Civil War Fuzz. Use the Angry Orange to make your own fuzzztortions with the hybrid modes, all with only three simple knobs.

This pedal can be True Bypass or Buffered Bypass, it only takes two seconds to switch between the modes. The Keeley Angry Orange is entirely manufactured at Keeley Electronics and is in the new aluminium enclosure.

Tone Control

The Angry Orange gives you two tone control circuits to choose from. When the Tone Switch is up and in the MF Position the tone control is a scooped sounding, passive tilt-style. If the Tone Switch is down and in the DS Position it also features a passive sounding tilt control, voiced a little differently.

Diode Clipping

Hard or Soft Clipping: The Angry Orange gives you both styles of diode clipping. Diodes are used to create hard clipping distortions or smooth overdrive sounds. If the Clipping Switch is in the DS Position it features Hard Diode Clipping which is an edgier, more aggressive tone. When the Clipping Switch is in the MF Position that uses Soft Diode Clipping, like a muffled fuzz tone.

Buffered and True Bypass

The Keeley Angry Orange allows you to quickly switch between either mode. Having a great buffer will make your rig sound strong and clear even when the pedal is off.

Buffered switching prevents the pops and clicks of true-bypass switching. If you want to turn on true bypass, simply press and hold the foot switch for two seconds. Holding the switch for two seconds toggle between modes. True Bypass is great if a buffer might affect the tone of a vintage pedal. Enjoy truly silent switching and a better sounding rig with Keeley's buffered switching mode.

Made In The USA

Keeley design, engineer, and manufacture the Keeley Angry Orange in Oklahoma City. Everything about the Super Rodent is geared towards the professional musician and their quest for an inspiring tone when the performance demands it. From the inside of the pedal and its meticulously built circuit boards and metal construction audio jacks to the outside of the effect its newly fabricated aluminium enclosure; Keeley make guitar effect pedals to be finely crafted musical instruments.

Notes: 4-in-1 Blues Breaker and OCD Style Overdrive and Distortion

Keeley combines two completely different overdrive and distortion circuits to create four different drives in one box. The Blues Disorder has two switches that allow you to separate the tone control from the clipping section.

By mixing and matching the Tone and Drive switches you get two hybrid sounds. With both switches up it's a smooth, soft-clipping Bluesy Breaker. The BB side is a low gain, soft-clipping overdrive. With both switches down it's a fuller sounding, hard-clipping OC Distortion. The clever design keeps the pedal a three knob overdrive with 4 unique sounds.

Switch easily between buffered or true-bypass; whichever sounds best in your rig. The Keeley Blues Disorder Overdrive and Distortion is designed and manufactured entirely by Keeley Electronics in a brand new aluminium enclosure.

Switchable Tone Stacks - Swap Voicings

The Blues Disorder gives you two tone control circuits to choose from. When the Tone Switch is down and in the OC position you will hear an active midrange boost and then the tone control rolls off high-frequency. If the Tone Switch is up and in the BB position you don't have the active mid boost, there's just a simple high-frequency filter and therefore a more transparent sounding overdrive and response.

Switchable Diodes - Hybrid Gain Clipping

The Blues Disorder gives you both styles of diode clipping. Where diodes are placed in the circuit, can have a dramatic effect on gain and compression. This pedal gives you both hard clipping distortion or soft clipping overdrive, depending on the position of the Drive Toggle.

If the Clipping Switch is in the OC position it features Hard-Clipping which is an edgier, more aggressive tone. Alternatively, when the Clipping Switch is in the BB Position, that uses Soft-Clipping and sounds like a softly overdriven tube amplifier.

Buffered and True Bypass

The Keeley Blues Disorder allows you to quickly switch between either mode. Having a great buffer will make your rig sound strong and clear even when the pedal is off.

Buffered switching prevents the pops and clicks of true-bypass switching. If you want to turn on true bypass, simply press and hold the foot switch for two seconds. Holding the switch for two seconds toggle between modes. True Bypass is great if a buffer might affect the tone of a vintage pedal.

Enjoy truly silent switching and a better sounding rig with Keeley's buffered switching mode.

Made In The USA

Keeley design, engineer, and manufacture the Keeley Blues Disorder in Oklahoma City. The Blues Disorder is geared towards the professional musician's demand for an inspiring tone when performance demands it. From the meticulously built electronic circuit boards to the in-house fabricated aluminium enclosure, Keeley pedals are professional grade. Keeley make guitar effect pedals to be finely crafted musical instruments.

Notes: Bags of character courtesy of 'tone wizard' Andy Timmons (Danger Danger). Dual delay lines work in tandem, creating stereo effects from vintage tape delay to infinite hold.

Supplier's Notes:
Andy Timmons' mysterious sounding "Halo" effect is a modulated dual echo sound that has long been kept a secret by the tone wizard himself. Andy spent decades combining and crafting the sounds you can now get from the HALO. Notes from the HALO dance rhythmically, almost creating a reverb diffusion. Those notes are held together with tape-style effects like modulation, saturation and compression. The results are stunning!

The pedal comes loaded with his signature delay tone and you can program your own sounds and save them as presets. Easily bounce between Side A and B on the fly, essentially giving you two delay pedals in one. In addition to Andy's signature "Halo" sound, there are numerous other rhythmic delays including: quarter note, dotted 8th, stereo rack mount analogue delay, and a vintage multi-head tape echo. Stunning stereo and pristine sound quality are further enhanced with controls for saturation, tone, and shelving filters that give you the ultimate delay pedal.

Think of HALO as two delay pedals that work in tandem, letting you switch between your main delay (side A) and an alternative (side B). With up to 1500 ms of available delay, set sides A and B for different delay times, then simply foot switch between the two. Keeley's Smart Stomp System allows you to press and hold either stomp switch to engage tap tempo mode. Press and hold the alternate stomp switch for infinite repeat/hold.

Each Preset bank gives you 2 delays settings for a total of 8 user-storable effects. Use the Rhythm control to select between different echoes like HALO, Analog, Tape, Quarter and Dotted Eighth. HALO's Saturate control adds tape compression texture to your tone. The Tone and High Pass Filter controls your overall delay shape and mix. The Rhythm Mode selector delivers 5 delay types, including Andy's unique "Halo" sound. Set the Time and Feedback controls low, and you can open up a world of ambient chorus and flanger effects.

Run the HALO in stereo for incredible true-stereo imaging or save your favourite combination of settings as a preset and the HALO becomes an incredibly compact multi-effect workstation!

Notes: Your eyes are not deceiving you! This incredible overdrive used to go by another playful bard-esque name. The new Mk3 Driver - Andy Timmons Full Range Overdrive is an overdrive workstation that allows you to orchestrate everything from a clean boost to a treble supercharger, a chimey tube-amp overdrive to a square-wave, germanium fuzz generator and more.

This Pedal combines a three-control blues driver circuit with two switches for the voicing of Drive and Tone characteristics. Robert and Andy developed these switches to give players a broad range of drive tones. The Drive toggle engages two germanium diodes for a smoother, slightly compressed drive. Switch to Andy's clipping style for a brighter and more articulate attack.

Every part of the circuit has been optimized for tone and the demanding needs of a recording and touring artist such as Andy Timmons. Simply adding the Mk3 Driver to your pedalboard will make your rig sound better. This professional grade overdrive can be switched between true-bypass and buffered bypass at any time.

Andy Timmons - Tone Switch

The Mk3 Driver gives you two tone control circuits to choose from. When the Tone Switch is up and in the AT Position the tone control features Andy's preferred voicing and low-end response. Each note in a chord is clear and articulate. If the Tone Switch is down and in the RK Position that features the legendary Phat Boost providing more low-end frequency response, perfect for pushing up vintage or single coil pickups.

Full Range Overdrive - Germanium Toggle Switch

This pedal's circuit combines JFET saturation, diode clipping, and op-amp clipping in order to create its harmonically rich tone. Drive Switch UP for AT Clipping - this mode features asymmetrical LED and silicon diode clipping and is Andy's Super AT Mod sound. Drive Switch Down for RK Clipping - now the circuit features two germanium diodes for clipping. This mode can sound a bit like a vintage fuzz pedal with a softer, smoother feel.

Buffered Bypass or True Bypass

The Mk3 Driver features our industry leading buffer for noise-free switching. We have developed a buffer which not only makes your rig sound better, it gives you silent switching with no tone loss. Switch between true-bypass and buffered on the fly. Simply press and hold the foot switch for two seconds and the pedal will switch between true-bypass and buffered bypass! You decide what works best in your rig.

Made In The USA

Keeley design, engineer, and manufacture the Keeley Electronics/Andy Timmons Mk3 Driver in Oklahoma City. Everything about the Mk3 Driver is geared towards the professional musician and their quest for an inspiring tone when performance demands it. From the meticulously built circuit boards to the newly fabricated aluminium enclosure; we make guitar effect pedals like finely crafted musical instruments.

Note From Andy Timmons:

'The Mk3 Driver is the ultimate expression of the clean/slightly broken-up tone I've been going for over the last several years. Robert Keeley and his incredible team have once again knocked it out of the park!

The AT/AT setting is exactly my Super AT Mod tone: just the right amount of breakup available at your dynamic command. Every note and nuance is clear as a bell. The crazy thing about this mode is that it also sounds great with the gain turned up, providing an incredibly cool Marshall-esque crunch tone.

Having the original RK modded BD-2 circuit is sheer luxury as that's the circuit that I fell in love with years ago! It still inspires me! The real hidden gem here is Robert's new modification that utilises germanium diodes instead of the original silicon for a new kind of clipping that works insanely well on its own OR as a boost for my lead tone. It has a lovely way of further taming the low-end that I really love.

With the Mk3 Driver and the Halo, I'm in Tone Heaven!'