Back catalogue: Studio Equipment

Notes: These knobs fit all 1010music products. Replace your damaged knobs or just swap them for a different colour. These knobs will fit blackbox, bluebox, the nanoboxes, bitbox mk1, bitbox mk2, bitbox micro, bluebox Eurorack edition, and Waverazor Dual Oscillator. They are sold in single colour packs of 4.

These are the official knobs used on 1010music products since the release of the bluebox. They fit the stems of the potentiometers on all current and past 1010music products. They come in packs of 4, all one colour.

Each knob is 0.65" / 18 mm high with a base diameter of 0.65" / 18 mm.

Notes: These knobs fit all 1010music products. Replace your damaged knobs or just swap them for a different colour. These knobs will fit blackbox, bluebox, the nanoboxes, bitbox mk1, bitbox mk2, bitbox micro, bluebox Eurorack edition, and Waverazor Dual Oscillator. They are sold in single colour packs of 4.

These are the official knobs used on 1010music products since the release of the bluebox. They fit the stems of the potentiometers on all current and past 1010music products. They come in packs of 4, all one colour.

Each knob is 0.65" / 18 mm high with a base diameter of 0.65" / 18 mm.

Notes: These knobs fit all 1010music products. Replace your damaged knobs or just swap them for a different colour. These knobs will fit blackbox, bluebox, the nanoboxes, bitbox mk1, bitbox mk2, bitbox micro, bluebox Eurorack edition, and Waverazor Dual Oscillator. They are sold in single colour packs of 4.

These are the official knobs used on 1010music products since the release of the bluebox. They fit the stems of the potentiometers on all current and past 1010music products. They come in packs of 4, all one colour.

Each knob is 0.65" / 18 mm high with a base diameter of 0.65" / 18 mm.

Notes: Type 1 - Blue Reverb

Features:
Compact and low cost type
2 natural coil spring type
Input impedance are changeable
Length of connect wire are changeable by optional

Application:
Specially suited for small wattage amplifier
For electric organs, guitar amplifier
Ideally suited for practice amps
2 Springs Type

Notes: Bumper case in extra rugged silicone. For extra protection on the go. Made from 100% recycled silicone.

Notes: Protective carry case with a soft velvet liner shaped for UNIT-4. Featuring a comfortable strap and netting pockets to bring your whole setup on the go.

Notes: The PULSE case is the perfect case for your Akai APC64: an ideal travel solution for mobile producers and musicians.

PULSE cases are made of rigid moulded EVA material that is durable and lightweight, while providing excellent protection. The 100% premium materials include a ballistic nylon exterior, super-soft velvet interior, and an ultra-smooth zipper.

With a spacious storage pocket for cables, and a comfortable handle, this case comes equipped with all the features you'll need for travel. Ultra-compact and totally flat, it can also pack easily into your backpack, carry-on, or a larger flight case.

PULSE Case For Akai APC64
Perfect fit for the Akai APC64
Rigid moulded case that provides excellent protection
Super-soft velvet interior and spacious pocket for cables
Compact and lightweight

Specifications

Perfect fit for your Akai APC64
Versatile and lightweight
Spacious and comfortable handle
High-quality Analog Cases logo zipper puller
Exterior Dimensions: 17.90 x 13.20 x 2.00 Inches

***Please note: the APC64 is not included, it is shown in the pictures for demonstration purposes only. ***

Notes: Taking your creativity on the go is easy with our PULSE Case for the Akai MPC Studio 2! With a rigid exterior made from molded EVA material and a plush velvet interior, you can feel confident knowing your MPC Studio 2's LCD screen and touch-sensitive pads are totally protected. This ultra-compact and totally flat case will pack easily into your backpack, so you can use the entire world as your studio!

Description

These PULSE cases are made from a durable EVA material that is custom molded to your Akai MPC Studio 2. This secure fit will prevent your MPC from shifting and moving if you throw your case into your backpack or luggage when you're on the move.

The nylon strap makes carrying this case a breeze and the secure fit will prevent your MPC from shifting and moving as you throw your case into your backpack or luggage.

The interior of the PULSE case features a mesh pocket for storing extra cables or notes. The case is also lined with high-quality, soft velvet. This ensures that the sleek exterior, LCD screen, and pads are protected as you move.

Specifications

Custom molded to the Akai MPC Studio 2
Made from a lightweight and durable EVA material
Internal storage pocket for extra cables
Lightweight and easy to carry
Exterior: 14.76 x 8.46 x 2.56

Notes: This PULSE case is molded to the exact dimensions of the Arturia MicroFreak / MiniLab / MicroBrute. It provides excellent protection for your synth, and is extremely lightweight.

PULSE cases are made from rigid EVA that holds its shape, and they feature a molded rubber handle that's tough and comfortable. This case also includes a nylon mesh compartment for holding your cables.

Weighing in at only 1 pound, this case is a breeze to haul around town. It looks great and is built to last, and can also be used to carry a wide variety of smaller devices.

Perfect fit for your Arturia MicroFreak, MiniLab or MicroBrute

Separate compartment for holding cables

Spacious and comfortable handle

Bottom foam insert to protect your keyboard (removable)

Interior dimensions: 15.25 x 9.25 x 2.5 inches

Exterior dimensions: 16.5 x 10.5 x 3.25 inches

Notes: The perfect lightweight travel case for your Digitakt or Digitone! Just zip it up and go make music anywhere. Analog Cases' durable PULSE cases are designed for mobile electronic musicians.

Description:

PULSE cases are made from molded EVA that holds its shape and provides excellent protection. This case is designed to hold the Digitakt or Digitone along with its power supply, and it also includes a nylon mesh compartment for holding your cables.

Specifications:

Perfect fit for your Digitakt or Digitone + cables

Versatile and lightweight

Spacious and comfortable handle

High quality Analog Cases logo zipper puller

Interior dimensions: 10.25 x 7.25 x 2.75 inches

Notes: Pulse case for Elektron Digitakt / Syntakt / Digitone

The perfect lightweight travel case for your Digitakt, Syntakt, or Digitone! Just zip it up and go make music anywhere. Our durable PULSE cases are designed for mobile electronic musicians.

PULSE cases are made from moulded EVA that holds its shape and provides excellent protection. This case is designed to hold the Digitakt or Digitone along with its power supply, and it also includes a nylon mesh compartment for holding your cables.

Specifications

Perfect fit for your Digitakt or Digitone + cables
Versatile and lightweight
Spacious and comfortable handle
High quality Analog Cases logo zipper puller
Interior dimensions 10.25 x 7.25 x 2.75 inches

Notes: Protect your Octatrack! The Elektron Octatrack is one of the most important and iconic machines for performing live electronic music. If you tour or perform live with your Octatrack, this is just the case for you.

Description:

This PULSE case is custom designed for the Octatrack. It's molded to the exact length of the machine, but we've also included additional space for holding your power cable.

The top lid of the case includes a layer of dense sponge foam, to protect the delicate fader and knobs of your machine. The body of the case is reinforced with extra-thick molded EVA foam, to survive the rigors of the road.

Whether you pack this case inside a suitcase, or carry it using the spacious and comfortable handle, it's the perfect lightweight solution to keep your machine in great shape. As an added bonus, this case can also be used for the Analog Rytm MK1 or Analog Four MKI.

Specifications:

Perfect fit for your Octatrack + power supply

Sponge foam lining in top lid to protect your fader and knobs

Interior velvet lining with molded EVA foam for additional protection

Extra-large premium zipper

Spacious and comfortable handle

Interior dimensions: 14 x 9 x 2.5 Inches

Exterior dimensions: 14.75 x 10.5 x 3.5 Inches

Notes: Keep your ZOIA in great shape with this new GLIDE case. This lightweight and perfectly sized case is ideal for keeping your machine free of scratches for years to come.

Description:

GLIDE cases are made from waterproof faux-leather that provides excellent protection, while looking oh-so-smooth and sleek. The exterior surface is enhanced with a subtle diamond pattern, while the interior is lined with plush fake fur.

This compact case is designed to the exact dimensions of the ZOIA, and packs easily into a backpack along with your other gear.

Specifications:

Custom designed for the Empress Effects ZOIA

Constructed from molded EVA foam and waterproof faux leather

Super-soft velvet lining

Mesh compartment for holding cables

Interior dimensions: 6.5 x 5 x 3 inches

Notes: With the Roland MC-101, you can produce music anywhere, anytime. Keep your unit protected while you're on the move with this durable and lightweight GLIDE case.

Description:

Custom-molded to fit the MC-101 or TR-6S, this case will provide the protection you need. The exterior is rigid and waterproof, while the interior is lined with soft velvet. Made from high-quality, premium materials, you'll never have to worry about your MC-101 while it's in our GLIDE case.

Specifications:

Custom designed for the Roland MC-101 or TR-6S

Durable molded EVA exterior

Super-soft velvet lining

Interior dimensions: 9.75 x 5 x 2 inches

Exterior dimensions: 10.5 x 6 x 2.75 inches

Notes: Transport bag for Roland SH-4D

This carrying case from Analog Cases is specially designed for the Roland SH-4D synthesizer.

In contrast to conventional nylon bags, the cases of the PULSE line are made of sturdy EVA (a moulded polymer that has so far only been used for high-quality housings in consumer electronics). It retains its shape and provides excellent protection. The sturdy carrying strap and low weight make the PULSE Case the ideal companion for a variety of common mini controller keyboards, smaller electronic musical instruments or audio interfaces. Inside, the separate nylon mesh pocket brings order to the cable chaos.

Analog Cases stands for practical and stylish design. The robust and lightweight bags are designed for modern music creators whose equipment is as mobile as their lifestyle. About its name, the manufacturer says:

"The name Analog Cases reflects our design philosophy: Bags should be simple, cool and stylish. For us, analogue is more than just a kind of sound - it's a way of life. Analogue means timeless, creative and beautiful. That's what motivates us to make music, and it's what motivates us to create cases."

Notes: Ready to elevate your creative workflow? Give your gear a boost with XTS Desktop Stands: the most durable and versatile stands on the planet!

Featuring a unique extendable design, XTS Stands can be easily resized to adapt to any gear setup. XTS Stands hold up to 25 pounds, offering the ultimate in stability.

Perfect for audio interfaces, MIDI controllers, pedals, synths, and samplers.

Two XTS Stand sizes are available, so you can find the right solution for your studio. The XTS Flex Tray can be added to the Large XTS Stand to use multiple pieces of gear.

The Small XTS Stand fits any compact machine or interface like the Roland SP-404 MKII, Elektron Digitakt, Arturia KeyStep 37, Akai MPK Mini, Universal Audio Apollo X4, and similar size gear.

XTS Desktop Stand System
Xtendable Stands resize to fit your gear
Sleek and ergonomic design elevates studio organization and workflow
Crafted from 100% solid sheet metal
Infinite versatility with 2 stand sizes available, and optional Flex Tray accessories

Sizes

Small XTS Stand: adjusts to any length 6.6" - 10.4"

Small XTS Stand compatibility includes:

Roland SP-404 MKII & SH-4D
Akai MPK Mini
Arturia KeyStep 37 & MicroFreak
Novation Launchpad X & Launchkey Mini
Elektron Digitone & Octatrack
Boss RC-505
Yamaha Reface
Moog Mother-32 & DFAM
Polyend Tracker & Play
Intellijel 4U Palette
MakeNoise 0-Coast
Behringer TD-3
SSL 2
Strymon BigSky & Timeline
Eventide H90

XTS Stand Dimensions

Small XTS Stand

Length: between 6.6" - 10.4"
Width: 7.1"
Height: 4.9"
Weight: 1.9 lbs

Notes: The GLIDE case is the perfect case for your Teenage Engineering EP-133 K.O. II: an ideal travel solution for mobile producers and musicians.

Expertly designed for a precise fit, this ultra-compact case packs easily into your backpack or carry-on. The rigid moulded exterior will ensure your KO 2 remains in mint condition for years to come.

GLIDE cases are made of EVA material that is durable and lightweight, while providing excellent protection. The 100% premium materials include a water-resistant faux leather exterior, super-soft velvet interior, and an ultra-smooth zipper.

GLIDE Case For Teenage Engineering EP-133 KO II
Perfect fit for the Teenage Engineering EP-133 KO II
Rigid moulded case that provides excellent protection
Super-soft velvet interior and spacious pocket for cables
Compact and lightweight

Specifications

Perfect fit for your Teenage Engineering EP-133 KO II
Premium faux leather exterior and faux fur lining
Mesh compartment for holding cables
High-quality Analog Cases logo zipper puller
Exterior Dimensions: 8.65 x 10.70 x 1.60 Inches
Interior Dimensions: 7.90 x 9.90 x 1.10 Inches

***Please note: the Teenage Engineering EP-133 KO II is not included, it is shown for demonstration purposes only. ***

Notes: Glide Case for the Teenage Engineering OP-1 Field or OP-1

Redesigned for 2023, Analog Cases' classic OP-1 case is now the perfect travel solution for either the OP-1 Field or the original OP-1!

Protect your investment and keep your OP-1 in mint condition with our lightweight and durable GLIDE case - the first and only case that's custom-moulded to the exact dimensions of this amazing machine.

Description

Now you can enjoy peace of mind when packing up your OP-1. This moulded case features a water-resistant faux leather exterior material, plus a layer of rigid moulded foam that surrounds your OP-1, providing excellent protection.

The subtle diamond pattern on the exterior surface makes this case smooth and sleek, and there's even a mesh compartment for holding cables or other miscellaneous items. The compact form factor makes it easy to put the case inside your backpack or suitcase.

Specifications

Perfect fit for your Teenage Engineering OP-1
Premium faux leather exterior and faux fur lining
Mesh compartment for holding cables
Exterior dimensions 12 x 5.5 x 1.5 inches
Interior dimensions 11.5 x 4.4 x 1.3 inches

Notes: Your powerful and lightweight KeyStep 37 will instantly become portable with a proper case to protect it during travel. From composing in your DAW to jamming with hardware, the KeyStep 37 can go with you anywhere with this PULSE Case.

Description:

The PULSE Case for the Arturia KeyStep 37 was designed by musicians to be highly versatile for all your mobile mobile scenarios, from tossing it in the trunk to packing it inside your luggage. The KeyStep 37 case is made from rigid EVA material that holds its shape, and is shockproof and water-resistant.

This PULSE Case features an interior mesh pocket that can store any extra cables, as well as an ultrasoft velvet interior lining to prevent any scratches on the surface of the KeyStep 37. With the PULSE Case, you'll never have to worry about traveling with your controller, so you can focus on making great music!

Specifications:

Perfect fit for your Arturia KeyStep 37

Comfortable molded handle

Interior pocket for holding cables

Versatile and lightweight

Interior dimensions: 22.25 x 7 x 3 inches

Exterior dimensions: 23 x 8 x 3.5 inches

Notes: Whether you're backstage recording a podcast or field recording on the go, the Zoom H8 deserves to be protected no matter what environment you're in! Our PULSE Case for the Zoom H8 will give you peace of mind knowing that your H8 is protected as you change your creative space. The high-quality black velvet interior and die-cut foam cutout will keep our H8 safe when you're in the field.

Description

The PULSE case is made of a durable, molded EVA material that will protect your H8 from any knocks and falls. Our PULSE Case has been custom fitted to the exact dimensions of the mixer, with a die-cut padded foam insert to keep your Zoom H8 secured and cushioned when you're on the go.

The PULSE Cases interior is lined with black velvet material to prevent any scratches on the screen of your H8. The PULSE Case also includes a mesh pocket for storing any additional cables or recording notes you might have. From backstage at the show to breaking waves at the beach, the PULSE Case is the ideal solution for protecting your Zoom H8.

Specifications

Perfect fit for your Zoom H8
Made from lightweight and durable EVA material
Internal storage pocket for cables
Custom molded foam interior
High-quality black velvet lining
Exterior: (15.5 x 7.17 x 2.95) Inches

Notes: Add an extra layer of protection to your Orba with custom Artiphon protective Silicone Sleeves. Made from flexible silicone, these protective sleeves cover the body of Orba, and add a bumper along the top playing surface for enhanced durability against drops, scratches, and dust. The removable, adjustable parachute cord strap securely attaches your Orba to your wrist or backpack for easy portability. Keep your instrument safe and sound wherever your music takes you.

Notes: Add an extra layer of protection to your Orba with custom Artiphon protective Silicone Sleeves. Made from flexible silicone, these protective sleeves cover the body of Orba, and add a bumper along the top playing surface for enhanced durability against drops, scratches, and dust. The removable, adjustable parachute cord strap securely attaches your Orba to your wrist or backpack for easy portability. Keep your instrument safe and sound wherever your music takes you.

Notes: Add an extra layer of protection to your Orba with custom Artiphon protective Silicone Sleeves. Made from flexible silicone, these protective sleeves cover the body of Orba, and add a bumper along the top playing surface for enhanced durability against drops, scratches, and dust. The removable, adjustable parachute cord strap securely attaches your Orba to your wrist or backpack for easy portability. Keep your instrument safe and sound wherever your music takes you.

Notes: Add an extra layer of protection to your Orba with our custom Silicone Sleeve. This flexible sleeve allows full access to buttons and cable ports and features a removable strap long enough to attach Orba to your wrist or backpack.

Notes: Stylish, lightweight, and durable, the CB-BM Series cases are the ideal solution for transporting your compact BOSS multi-effects unit and essential accessories. They are a perfect fit with a durable exterior and soft internal padding that shields your processor while on the go.

Notes: Stylish, lightweight, and durable, the CB-BM Series cases are the ideal solution for transporting your compact BOSS multi-effects unit and essential accessories. They are a perfect fit with a durable exterior and soft internal padding that shields your processor while on the go.

Notes: Custom Pouch for KATANA:GO

Filled with premium BOSS guitar and bass tones, the compact KATANA:GO headphone amplifier makes it easy to practice with inspiring sound everywhere you travel. The stylish and durable CB-KTNGO pouch provides a protective home for your KATANA:GO, along with room for a charging cable, earbuds, and other small items.

Practice Everywhere with KATANA:GO

The palm-size KATANA:GO delivers a high-quality BOSS sound experience for jamming and practicing anytime and anywhere. With its padded design and rugged materials, the CB-KTNGO pouch keeps the headphone amp safe and secure until it's time for the next playing session.

A Place for Everything

The CB-KTNGO pouch provides a main pocket for KATANA:GO and its charging cable, and there's a convenient cable tie to keep things tidy. There's also a mesh pocket in the lid, perfect for stowing earbuds, picks, and other small accessories. The internal divider in the main pocket can be adjusted or removed to carry alternate items, such as the compact BOSS WL-20/WL-20L and WL-30XLR wireless systems.

Specifications

Compatible Models: KATANA:GO
Main Material: Polyester

Size & weight

Dimensions (excluding protruding parts): 125 x 90 x 50 mm / 4-15/16 x 3-9/16 x 2 inches
Weight: 70 g / 3 oz

Notes: Introducing the Ergonomic Studio Stand for Ableton Push 3: a game-changer in the world of music production. Designed with your comfort and productivity in mind, this stand is the ultimate solution for those seeking a more immersive and ergonomic music-making experience.

Crafted with precision, the stand offers a sleek and sturdy design that seamlessly integrates with your Ableton Push 3 controller. By elevating your controller to an optimal height and angle, it eliminates the strain on your wrists and neck, allowing you to focus on your creativity without any discomfort.

One of the standout features of this stand is its ability to enhance your visual experience. With a specially designed screen mount, it brings the Ableton Push 3's display closer to your line of sight, ensuring crystal-clear visibility of every detail. No more squinting or straining your eyes to read parameters or follow your music-making process. The screen becomes an extension of your creativity, effortlessly accessible at all times.

The stand's ergonomic design also promotes a more organized and efficient workspace. Its integrated cable management system keeps your cables neat and tangle-free, reducing clutter and allowing you to concentrate fully on your music production. Additionally, the stand's robust construction ensures stability, even during intense sessions, guaranteeing a secure and reliable platform for your Ableton Push 3.

Whether you're a professional music producer or an aspiring artist, the Ergonomic Studio Stand for Ableton Push 3 offers unparalleled comfort and convenience. It enhances your workflow, minimizes physical strain, and maximizes your creative potential. Take your music production to new heights with this exceptional accessory that is both stylish and functional.

Upgrade your studio setup today and revolutionize the way you create music with the Ergonomic Studio Stand for Ableton Push 3. Experience comfort, visual clarity, and an improved working environment that will elevate your musical journey to new levels of excellence.

Notes: With small synthesizers, where the knobs and controls are closer together, it's crucial to have a good working position.

This helps make small equipment more "usable" when integrating them into a setup.

For the Behringer Pro VS Mini, CoverUp Pro offer an ergonomic stand with two different angles: 20 degrees and 40 degrees.

Depending on your preference, you can choose between these two available options.

Each stand has rubber feet to prevent scratching or slipping.

*** Please note: The Behringer Pro VS Mini is not included, it is shown for demonstration purposes only. ***

Notes: If you have Behringer TD3 machines in your studio, this is the ideal stand.

Designed and designed exclusively for the Behringer TD3, it may be more comfortable, more spacious and maintains your equipment 100% safe and stable.

All our supports, keep adherent feet 3m behind them so that the support does not loosen.

Notes: Double Stand for Elektron MK2 and up to x2 Digi

The ergonomic, portable, and eco-friendly stand by COVERUP is designed to hold Elektron MK2 and up to two Digi devices. It allows for versatile positioning of your equipment while saving valuable space in your setup. Perfect for studio or live performances, this stand combines functionality and sustainability in a sleek design.

Notes: Bracket for mounting two DIGI machines

It allows it to be used in a comfortable and ergonomic position, which in turn saves space.

Specially designed with the need for space for wiring and connectors in mind.

On the support faces, each bracket has a recess to place silicone feet and prevent the equipment from slipping or scratching.

Notes: This specially designed stand for Elektron Digitakt / Digitone is attached from below to the equipment’s chassis, utilizing its universal VESA mounting points, enabling the use of the equipment in a much more ergonomic inclined position.

By swapping the position of the feet, it is possible to use the equipment in two different positions: lying down and upright.

It can be set up in a matter of seconds and weighs just a few grams.

Each stand features a groove to accommodate silicone feet to prevent the equipment from slipping or scratching.

Includes both side stands, screws for installation, and silicone feet.

Notes: This stand was specially designed to mount one Digi and one Elektron MK2 synthesizers (Analog Four and Analog Rytm).

It also allows you to combine other equipment of similar dimensions.

Each side is made up of two pieces that are firmly held together by a screw.

The versatility of the design allows it to be used as a double support or as two simple supports, separating the front from the back.

Its shape is designed so that it does not interfere with the rear connectors of the equipment.

Notes: ELK (Elektron Leveling Kit) is a set of stands designed to match the height and angle of various generations and models of Elektron devices.

The MK2 series (RYTM and A4) features an incline, while other current models such as Digitakt, Digitone, Syntakt, and Analog Heat are flat. Additionally, we include previous generations such as Machinedrum, Monomachine, A4, RYTM, and Octatrack in this list.

With these stands, the fronts of the synthesizers are aligned at the same height and angle, creating a seamless continuation of the equipment placed beside them.

Compatible with Analog RYTM MK2 and Analog Four MK2 DIGI Stand.

Compatible with Digitakt, Digitone, Syntakt, Analog Heat (MK1 and MK2), Machinedrum, Monomachine, A4 MK1, RYTM MK1, and Octatrack (MK1 and MK2).

Each stand has rubber feet on its bottom to prevent slipping or scratching on the supporting surface.

Kit includes: X1 MK2 + X1 Digi elevate stand

Notes: This stand has the peculiarity that depending on the side that each foot is placed, 3 different work positions can be achieved.

Each foot adjusts to the equipment and allows it to be used in a much more comfortable and ergonomic position.

It is designed in such a way that all its forms are copied by the support and the fit is perfect.

In its lower part, each leg has a recess to place silicone legs and prevent the equipment from slipping.

Includes stand and silicone legs.

For up to three Make Noise desktop units
Suitable for 0-Coast, 0-Ctrl and Strega
Made of biocompatible PLA plastic
Connection of the side parts via wooden rods
Dimensions (WxHxD): 290 x 285 x 200 mm
Colour: Black

Notes: For two Make Noise desktop units

Suitable for 0-Coast, 0-Ctrl and Strega

Made of biocompatible PLA plastic

Connection of the side parts via wooden rods

Colour: Black

Notes: Moog is synonymous with synthesizers, and we have created a triple stand for three of their latest inventions. This triple stand is designed for the Mother32, DFAM, and Subharmonicon. You can assemble the parts as a triple stand, or you can use them separately as a double stand and an elevated single stand. While these synthesizers already have a slight incline, you will see how much more comfortable it is to use them together in a column and how much space you can save on your studio table. CoverUp studied the cabinets of each device to design a stand that fits perfectly and takes advantage of each shape to add strength and stability. Spce has been left to ensure the rear connectors don't collide with the stand. All of CoverUp's stands come with 3M rubber feet to prevent scratching or slipping.

Notes: ***B-STOCK: Box opened, product in perfect working order***


The ideal support for your three Boutique synthesizers.

To use them in a comfortable and ergonomic position, which in turn saves space.

Specially designed taking into account the need for space for wiring and rear connectors.

On the support faces, each support has a recess to place silicone feet and prevent the equipment from slipping or scratching.

Includes the two side supports, the rods and the silicone feet

Notes: The well-known Pocket Operators are essentially bare electronic boards, with the components visible.

To protect your Pocket Operator and make its use more comfortable, CoverUp offer this case, which includes a front part, a back cover, and the buttons.

This case is compatible with the entire Pocket Operator series, and its assembly is very simple.

Notes: For the Blofeld & Pulse2 duo, Cover Up have developed a potential stand:

Dual Stand for those fortunate enough to own two units of this pair, this stand will be indispensable in your setup. With space for rear connectors. It saves space and enhances the working position.

*** Please note: the Blofeld/Pulse 2 is not included, it is shown for demonstration purposes only. ***

Notes: For the Blofeld or Pulse2 duo, Cover Up Pro developed a potential stand:

20 degrees Stand With a slight tilt, it improves posture, screen visibility, and access to its functions.

*** Pleas note: The Blofeld/Pulse 2 is not included, it is shown for demonstration purposes only. ***

Notes: The Decksaver cover for the Ableton Move is the ultimate accessory for protecting your gear while preserving its sleek aesthetic.

Precision-moulded from ultra-durable polycarbonate, this cover is designed to shield your Move from dust, spills, and accidental impact without compromising accessibility.

Whether you're transporting it to a gig, storing it in your studio, or simply keeping it safe between sessions, the low-profile design ensures a snug fit and hassle-free use.

Engineered with the same attention to detail as the Ableton Move itself, the Decksaver cover combines robust protection with a clear, professional finish that showcases your gear.

Dimensions

Weight: 0.38 kg
Length: 15.2 cm
Width: 31.9 cm
Height: 3.8 cm

Material: smoked polycarbonate

Notes: The AKAI APC64 is a dynamic instrument in the realm of music production and live performance, playing a critical role in numerous artists' setups. To protect such a vital piece of equipment, this Decksaver cover, made from sturdy polycarbonate, presents the perfect solution. It is precisely crafted to shield your APC64 from dust, liquid spills, and unexpected knocks.

Expertly designed for the AKAI APC64, this Decksaver cover ensures an impeccable fit, accommodating all cables and connections. This meticulous attention to detail allows the cover to be smoothly slotted into a flight case or controller bag, ideal for those constantly on the move. Whether you're moving your setup to a performance, operating in a studio, or engaging in live shows, this cover offers superior protection, ensuring your APC64's buttons, pads, and knobs are defended against the challenges of daily use.

Choosing this Decksaver cover for your AKAI APC64 is more than a sensible decision; it signifies a dedication to preserving the longevity and impeccable condition of your cherished equipment.

Dimensions
Weight: 0.365 kg
Length: 37.7 cm
Width: 27.5 cm
Height: 2.7 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: Preserve the power and versatility of your AKAI MPC Key 37 with the Decksaver cover, expertly crafted to offer top-tier protection for your music production tool.

Decksaver understand the critical importance of keeping your equipment safe, which is why they've designed a lid that provides unrivalled defence against dust, liquid spills, and accidental impacts, ensuring your MPC Key 37 remains a reliable partner in your creative journey.

The Decksaver cover for the AKAI MPC Key 37 is meticulously moulded to fit the controller's unique shape with precision. Its robust polycarbonate construction acts as a shield, protecting your device against scratches, dings, and other physical hazards, while preserving its sleek aesthetics and optimal performance. With this cover, you can produce music with confidence, knowing that your MPC Key 37 is safeguarded from the rigours of the studio and beyond.

This cover not only provides exceptional protection but also grants easy access to all the essential features of the AKAI MPC Key 37. Every key, pad, and control remains conveniently accessible, allowing you to compose, sequence, and perform effortlessly. The smoked clear, transparent design of the cover lets the stylish look of the MPC Key 37 shine through while ensuring reliable protection against everyday wear and tear.

Whether you're a mobile producer on the go, a studio professional pushing creative boundaries, or a music enthusiast at home, the lid is designed to accommodate your lifestyle. Its lightweight yet sturdy construction makes it ideal for transportation. Simply slide your MPC Key 37 into your equipment bag or carry case, and rest assured that your controller is shielded from potential damage during transit.

By investing in the Decksaver cover, you're investing in the longevity of your AKAI MPC Key 37. This cover adds an extra layer of defence against dust, liquid spills, and accidental impacts, extending the lifespan of your controller and ensuring it stays in prime condition for countless sessions. With the Decksaver cover, you can focus on delivering exceptional music, exploring your creative potential, and captivating your audience.

Elevate your protection game and keep your 37 in pristine condition with the Decksaver cover. With meticulous attention to detail, this cover provides reliable protection while allowing for seamless music production.

Embrace the peace of mind that comes with knowing your MPC Key 37 is shielded from potential hazards, so you can focus on what truly matters, creating unforgettable music and making a lasting impact on your listeners.

Dimensions

Weight: 0.69 kg
Length: 59 cm
Width: 31.7 cm
Height: 4.7 cm

Notes: Ensure the longevity and performance of your AKAI MPK Mini Plus with the Decksaver cover, expertly designed to provide top-tier protection for your essential music production tool. Recognising the critical importance of safeguarding your equipment, Decksaver have crafted a cover that offers unparalleled defence against dust, liquid spills, and accidental impacts, ensuring your Mini Plus remains a reliable partner throughout your creative journey.

The Decksaver cover for the AKAI MPK Mini Plus is meticulously moulded to fit the controller's unique shape with precision. Its robust polycarbonate construction acts as a shield, protecting your device against scratches, dings, and other physical hazards, while maintaining its sleek aesthetics and optimal performance. With this cover, you can create music with confidence, knowing that your MPK Mini Plus is safeguarded from the rigours of the studio and beyond.

This cover not only provides exceptional protection but also grants easy access to all the essential features of the AKAI MPK. Every key, pad, and control remains conveniently accessible, allowing you to compose, sequence, and perform effortlessly. The transparent design of the cover lets the stylish look of the MPK Mini Plus shine through while ensuring reliable protection against everyday wear and tear.

Whether you're a mobile producer on the go, a studio professional pushing creative boundaries, or a music enthusiast at home, the Decksaver cover is designed to fit seamlessly into your lifestyle. Its lightweight yet sturdy construction makes it ideal for transportation. Simply slide your MPK Mini Plus into your equipment bag, backpack, or carry case, and rest assured that your controller is shielded from potential damage during transit.

By investing in the Decksaver cover, you're investing in the longevity of your Mini Plus. This cover adds an extra layer of defence against dust, liquid spills, and accidental impacts, extending the lifespan of your controller and ensuring it stays in prime condition for countless sessions. With the Decksaver cover, you can focus on delivering exceptional music, exploring your creative potential, and captivating your audience.

Elevate your protection game and keep your MPK Mini Plus in pristine condition with the Decksaver cover. With meticulous attention to detail, this cover provides reliable protection while allowing for seamless music production. Embrace the peace of mind that comes with knowing your MPK Mini Plus is shielded from potential hazards, so you can focus on what truly matters, creating unforgettable music and making a lasting impact on your listeners.

Dimensions

Weight: 0.22 kg
Length: 45.6 cm
Width: 18.5 cm
Height: 3.4 cm

Material: Smoked clear polycarbonate.

Warning: When your Decksaver cover is in place, please ensure your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: Introducing the Decksaver cover, meticulously crafted for the Allen & Heath CQ-12T mixer. This cover, engineered with exacting precision and made from superior-grade material, offers a bespoke-fit solution that is unrivalled. It provides your CQ-12T with unparalleled defence against common hazards like dust, liquid spills, and accidental knocks or impacts.

Understanding the significance of your mixer as a vital component of your audio setup, this Decksaver cover has been designed to ensure your CQ-12T remains in pristine condition, regardless of the setting. Whether in the studio, at a live performance, or during transportation, the cover acts as a reliable shield, preserving the functionality and aesthetics of your mixer.

Its sleek, transparent design not only delivers robust protection but also showcases the sophisticated build of your CQ-12T, integrating flawlessly with its professional appearance. The precise fit ensures that every knob, fader, screen, and input is covered, yet remains easily accessible for quick setups and teardowns. This design principle means that you don't have to choose between safety and style.

Furthermore, the Decksaver cover for the CQ-12T is lightweight and durable, making it an ideal accessory for DJs on the move. It adds an additional layer of security against the challenges of travel and frequent use, protecting your investment from the wear and tear of the road.

With this Decksaver cover, you acquire not just a protective measure, but a declaration of professionalism. It reflects your dedication to quality and the importance you place on keeping your equipment in its best condition. Embrace the peace of mind and confidence that comes with knowing your Allen & Heath CQ-12T is well-protected, allowing you to concentrate on what you do best; creating and performing music.

Weight: 0.151 kg
Length: 27.4 cm
Width: 23.7 cm
Height: 4 cm

Material: Smoked clear polycarbonate.

Warning: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: The Allen & Heath CQ-18T has become a highly coveted device to protect, owing to its versatile features in managing mixing, recording, live performance, and digital audio workstation (DAW) integration. Its multifunctional nature distinguishes it as a preferred option for audio professionals.

Decksaver's range of professional mixer covers is designed to provide audio engineers with the confidence and peace of mind necessary in any environment.

Specifically conceived and crafted in the UK for the Allen & Heath CQ-18T, this Decksaver cover is manufactured from polycarbonate-a robust and transparent material precisely tailored to the exact specifications, achieving the perfect level of smoked clarity.

Each design is subject to rigorous testing to confirm it meets Decksaver's stringent standards, assuring you of its quality and dependability. The cover efficiently protects faders, buttons, knobs, and indicators from dust, spills, and unintended impacts, whilst preserving the integrity of your cables and settings.

Endorsed by industry experts and utilised by professionals, the Decksaver cover for the CQ-18T is the preferred selection for safeguarding your equipment, ensuring no compromise on functionality or aesthetics.

Dimensions

Weight: 0.194 kg
Length: 32.9 cm
Width: 23.8 cm
Height: 4.9 cm

Material: Smoked clear polycarbonate

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: The Behringer Crave and Edge, two titans in the synthesiser world, stand as beacons of innovation and creativity, pushing the frontiers of sound exploration. Acknowledging their critical roles and responding to the fervent demand for dependable protection, Decksaver are proud to introduce this cover duo, specifically fashioned for the Crave and Edge synthesisers. These covers are meticulously crafted from premium-grade materials, designed to shield your instruments from dust, spills, and accidental knocks, thus ensuring their durability and maintaining their pristine condition.

Tailored with precision to match the unique contours of the Behringer Crave and Edge, Decksaver covers ensure a perfect fit, encapsulating all vital components, including knobs, sliders, and connectors. Despite offering robust protection, these covers allow easy access to all essential controls and ports, enabling seamless integration into your creative process, whether in the studio or on stage. From intense jamming sessions to detailed studio work, these covers act as unwavering protectors, ensuring your synths are always prepared for any sonic journey.

Choosing Decksaver covers for your Behringer Crave and Edge is not merely about protecting your instruments; it's about investing in their sustained performance and preserving their sound quality. Esteemed by musicians and producers globally, these covers are indispensable accessories for anyone dedicated to the care and preservation of their Behringer devices, empowering them to explore their musical creativity with confidence and peace of mind.

Dimensions

Weight: 0.225 kg
Length: 32.2 cm
Width: 18.6 cm
Height: 5.9 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: The Behringer Flow 8, revered for its cutting-edge features and unparalleled versatility in audio mixing, has swiftly established itself as a cornerstone in the realm of sound production. Recognizing its indispensable role and in response to a resounding demand for reliable safeguarding, Decksaver are delighted to introduce the cover tailored for the Behringer Flow 8. Crafted with meticulous attention to detail using premium-grade polycarbonate, this cover is engineered to provide maximum protection to your Flow 8, shielding it from dust, liquid spills, and inadvertent impacts, thereby ensuring the longevity and peak performance of this exceptional mixer.

Precision-engineered to seamlessly conform to the unique contours of the Behringer Flow 8, this Decksaver cover assures a snug fit, enveloping all essential components including faders, knobs, and displays, while facilitating convenient access to all necessary connections. This thoughtful design aspect is essential for audio enthusiasts and professionals alike, who demand both robust protection and effortless accessibility for setup and breakdown. Whether in a bustling live venue, a bustling studio environment, or during storage, this cover serves as a steadfast guardian, preserving both the functional integrity and aesthetic appeal of your Flow 8.

Selecting this Decksaver cover for your Behringer Flow 8 transcends mere protection; it signifies a commitment to nurturing and maintaining a pivotal piece of audio equipment. Esteemed and coveted by industry experts, this cover stands as an indispensable asset for anyone dedicated to upholding their Behringer Flow 8 in immaculate condition, primed for every mixing endeavour and creative pursuit.

Weight: 0.125 kg
Length: 23.5 cm
Width: 17.5 cm
Height: 3.2 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.