100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Tonar

View:
Options
Items 1 to 46 of 46 on page 1 of 1
Cat: 567673 Rel: 27 Mar 15
 
Replacement 10" outer record sleeves, pack of 25
Notes: Replacement 10" outer record sleeves, pack of 25
Read more
 1 in stock $19.06
Cat: 567671 Rel: 27 Mar 15
 
Pack of 25 high quality 12" outer record sleeves
Notes: Tonar LP album cover 30 cm/12 inch records. 125 mu PP. Suitable for LP records only (12 inch - 30 cm). 25 pieces per pack
Read more
 2 in stock $18.51
Cat: 567701 Rel: 26 Mar 15
 
High quality metal 45 adapter for turntables
Notes: A 45 rpm adapter (also 45 rpm record insert, or 45 rpm spindle adapter) is a small plastic or metal insert that goes in the middle of a 45-rpm record so it will play on a turntable. The adapter could be a small solid circle that fits onto the bottom of the spindle (meaning only one 45 could be played at a time) or a larger adapter that fits over the entire spindle, permitting a stack of 45s to be played.
Read more
 3 in stock $8.70
Cat: 588038 Rel: 01 Jan 90
 
Pair of professional disco cartridges with styli
Notes: A stylus that meets the high demands of DJs.

The special heavy-duty suspension of the headshell and the spherical diamond guarantee reliable tracking. An integrated weight ring creates heaviness thus allowing high bearing strength.

The design allows easy installation on all drives with SME-Disco Connection: Tighten the plug in screw cap on the tone arm, adjust contact pressure and even the professional record no bounds are set.
Read more
 1 in stock $122.01
Cat: 309170 Rel: 09 Mar 12
 
Professional disco cartridge
Notes: A stylus that meets the high demands of DJs.

The special heavy-duty suspension of the headshell and the spherical diamond guarantee reliable tracking. An integrated weight ring creates heaviness thus allowing high bearing strength.

The design allows easy installation on all drives with SME-Disco Connection: Tighten the plug in screw cap on the tone arm, adjust contact pressure and even the professional record no bounds are set.
Read more
 More than 10 in stock $74.07
Cat: 567766 Rel: 25 Mar 15
 
Birdie DJ cartridge with stylus tip, suitable for scratching
Notes: Birdie DJ cartridge with stylus tip, suitable for scratching
Read more
 4 in stock $41.39
Cat: 567729 Rel: 27 Mar 15
 
Leather turntable mat for isolation of vinyl from surroundings
Notes: During the past 20 years the quality of record players and vinyl records have improved dramatically. Acoustic feedback is one of the big problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound "muddy". So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player.

In order to reduce acoustic feedback from the surroundings back to the record and the cartridge a lot of effort has gone into developing turntable mats that make the reproduced sound crystal clear with great separation and detail. This has been done by experimenting with various materials which absorb unwanted vibrations which were not present in the original recording. Now many people are trying to combine these different materials as a sandwich at the same time in order to reach better results. Now Tonar offers you this opportunity to experiment yourself but at modest pricing.

In order to enhance the better contact between the record and the mat, the center part - with the dimensions of the label have been recessed to accommodate the thicker label part.

- Diameter 295 mm.
- Thickness 3 mm.
Read more
 2 in stock $21.78
Tonar Cartridge Alignment Protractor (cartridge alignment tool)
Cat: 567734 Rel: 27 Mar 15
 
Cartridge alignment tool for proper setting of your cartridge offset and overhang
Notes: This cartridge alignment protector allows the proper setting of the cartridge offset and overhang
Read more
 2 in stock $12.56
Cat: 567666 Rel: 26 Mar 15
 
High quality carbon fibre stylus tip cleaning brush
Notes: Clean tip carbon fiber stylus cleaner
Read more
 2 in stock $7.95
Cat: 567726 Rel: 27 Mar 15
 
Cord & rubber turntable mat for isolating vinyl from surroundings
Notes: During the past 20 years the quality of record players and vinyl records have improved dramatically.
Acoustic feedback is one of the big problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound "muddy". So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player.

In order to reduce acoustic feedback from the surroundings back to the record and the cartridge a lot of effort has gone into developing turntable mats that make the reproduced sound crystal clear with great separation and detail. This has been done by experimenting with various materials which absorb unwanted vibrations which were not present in the original recording. Now many people are trying to combine these different materials as a sandwich at the same time in order to reach better results. Now Tonar offers you this opportunity to experiment yourself but at modest pricing.

In order to enhance the better contact between the record and the mat, the center part - with the dimensions of the label have been recessed to accommodate the thicker label part.

- Diameter 295 mm
- Thickness 3 mm
Read more
 2 in stock $21.78
Cat: 567765 Rel: 25 Mar 15
 
Replacement DJ cartridge with elliptical stylus tip and 8mV output
Notes: Replacement DJ cartridge with elliptical stylus tip and 8mV output.

Requires screws & nuts are included.
Read more
 2 in stock $53.37
Cat: 588296 Rel: 01 Jan 90
 
Pair of replacement DJ cartridges with elliptical styli and 8mV output
Notes: Replacement DJ cartridge with elliptical stylus tip and 8mV output.

Requires screws & nuts are included.
Read more
 1 in stock $87.15
Cat: 567696 Rel: 25 Mar 15
 
DJ headshell with 2g & 4g weights included, black
Notes: DJ headshell with 2g & 4g weights included, black

Necessary screws and nuts are included.
Read more
 5 in stock $17.42
Cat: 567657 Rel: 25 Mar 15
 
Dust jockey record cleaning brush with velvet pad, surrounded by carbon fibre brushes
Notes: This state-of-the-art DJ record cleaning brush combines the properties of the Tonar Classic brush and the Nostatic brush into one brush! The center part of the brush is made of ultra-fine pile high quality velvet. This velvet is flanked on both sides by a thick layer of very fine carbon fibers. The carbon fibers remove the static from the record so the dust lays loose and can be easily picked up by the velvet in the middle of the brush even from deep in the record grooves.
Read more
 3 in stock $17.42
Cat: 567658 Rel: 25 Mar 15
 
High quality record cleaning brush with carbon fibre brushes and velvet cleaning pad
Notes: This state-of-the-art DJ record cleaning brush combines the properties of the Tonar Classic brush and the Nostatic brush into one brush! The center part of the brush is made of ultra-fine pile high quality velvet. This velvet is flanked on both sides by a thick layer of very fine carbon fibers. The carbon fibers remove the static from the record so the dust lays loose and can be easily picked up by the velvet in the middle of the brush even from deep in the record grooves.
Read more
 2 in stock $17.97
Cat: 690132 Rel: 18 May 18
 
Spirit level designed for turntables
Notes: A turntable on a slope is not good, it can affect the performance of your tonearm, making it prone to jumping and skipping. This simple but effective level from the experts at Tonar will tell you if your turntables are mounted on a flat surface for optimal performance.
Read more
 2 in stock $9.53
Cat: 567691 Rel: 25 Mar 15
 
Lightweight black headshell
Notes: Lightweight black headshell.
Read more
 2 in stock $17.16
Cat: 567689 Rel: 25 Mar 15
 
Lightweight silver headshell
Notes: Lightweight silver headshell.

Attachment screws and nuts included.
Read more
 2 in stock $17.16
Cat: 588260 Rel: 01 Jan 90
 
Pair of lightweight black headshells
Notes: Lightweight black headshell.

Attachment screws and nuts included.
Read more
 1 in stock $31.59
Cat: 690133 Rel: 18 May 18
 
Spirit level designed for turntables
Notes: A turntable on a slope is not good, it can affect the performance of your tonearm, making it prone to jumping and skipping. This simple but effective level from the experts at Tonar will tell you if your turntables are mounted on a flat surface for optimal performance.
Read more
 2 in stock $25.04
Cat: 567659 Rel: 25 Mar 15
 
Micro fibre cleaning cloth for records and CDs
Notes: Tonar micro fibre cloth is a material well known for it's properties to remove grease and fat from any surface. Tonar uses this material to clean finger prints and grease from records as well as CD's and DVD's.

It also will remove the dust from records and replace the former cotton type record cloths.
Read more
 4 in stock $4.41
Cat: 660312 Rel: 12 Feb 18
 
Plate record clamp by Tonar - black
Notes: Tonar Misty Record-Clamp - transparent black. The Tonar Misty plate clamp is the perfect alternative if a "plate puck" is too heavy for your turntable.
Read more
 1 in stock $53.38
Cat: 660311 Rel: 12 Feb 18
 
Plate record clamp by Tonar - blue
Notes: Tonar Misty Record-Clamp - transparent blue. The Tonar Misty plate clamp is the perfect alternative if a "plate puck" is too heavy for your turntable.
Read more
 2 in stock $53.38
Cat: 660314 Rel: 12 Feb 18
 
Plate record clamp by Tonar - green
Notes: Tonar Misty Record-Clamp - transparent green. The Tonar Misty plate clamp is the perfect alternative if a "plate puck" is too heavy for your turntable.
Read more
 2 in stock $53.38
Cat: 660313 Rel: 12 Feb 18
 
Plate record clamp by Tonar - red
Notes: Tonar Misty Record-Clamp - transparent red. The Tonar Misty plate clamp is the perfect alternative if a "plate puck" is too heavy for your turntable.
Read more
 2 in stock $53.38
Cat: 699418 Rel: 14 Aug 18
 
Replacement stylus
Notes: Tonar replacement needle/stylus for Shure M-44-7. Diamond tip.
Read more
 More than 10 in stock $18.52
Cat: 699419 Rel: 14 Aug 18
 
Replacement stylus
Notes: Tonar replacement needle/stylus for Shure N-44-G. Diamond tip.
Read more
 4 in stock $20.15
Cat: 699420 Rel: 14 Aug 18
 
Replacement stylus
Notes: Tonar replacement needle/stylus for Shure M-92-E. Diamond tip.
Read more
 7 in stock $20.15
Cat: 567749 Rel: 24 Mar 15
 
Adhesive universal isolation foot pads for turntables, isolate your turntable from external vibrations
Notes: Universal isolation foot pads for turntables, isolate your turntable from external vibrations.

This product comes in a pack of 8 pads, enough for 2 turntables.
Read more
 1 in stock $16.87
Cat: 567670 Rel: 27 Mar 15
 
Replacement inner sleeves for 12" records, pack of 50
Notes: Tonar nostatic sleeves 30 cm/ 12 inch records. 40 mu HDPE. Suitable for single records only (12 inch" - 30 cm). 50 pieces per pack
Read more
 2 in stock $16.33
Cat: 567662 Rel: 24 Mar 15
 
Static electricity and dust removal arm tool, with carbon fibre brush and sliding weight for force adjustment
Notes: The Nostatic Arm is the modern version of the formerly well known "Dust Bug" by Cecil Watts. The Nostatic arm incorporates a carbon fiber brush that removes the static electricity from the record during playback, and at the same time picks up the loose dust before the stylus reaches that part of the record. The Nostatic arm has an earth wire which is connected to the earth of the record player or the amplifier.

The height can be easily adjusted to fit most record players. It also has a sliding weight in order to adjust the "dusting force" of the brush. Finally the base of the brush has sticky tape so if preferred it can be stuck to the surface of the record player for easy use.
Read more
 2 in stock $18.51
Cat: 567653 Rel: 25 Mar 15
 
Carbon fibre record brush for removal of dust & other particles from vinyl grooves
Notes: This brush contains more than one million very fine carbon fibre bristles. The cross section of these bristles is so small that they can easily get into all the nooks and crannies of the record groove. Because the carbon fiber conducts electricity it takes away all the static to earth via the metal handle and the person holding the brush. Then the dust lies loose in the groove so the next set of bristles can easily pick them up and remove them from the record groove.
Read more
 2 in stock $10.24
Cat: 567669 Rel: 27 Mar 15
 
Replacement plastipap, antistatic record inner sleeves - pack of 25
Notes: Tonar plastipap antistatic record inner sleeves (25 pieces) are made of super antistatic plastic paper reinforcement inside the plastic. This combination gives you both a dust free anti-static protection for your valuable records as well as additional strenght to avoid folding and creasing of the sleeves when sliding the sleeve in and out of the record album. This model 5311 plastipap is suitable for LP records only (12 inch-30 cm). Tonar plastipap inner sleeves are also available for 45, and 78 RPM records.

Tonar supplies record inner sleeves for 33, 45 and 78 RPM records as well as outer sleeves to protect your valuable album sleeves.
Read more
 2 in stock $19.88
Cat: 567724 Rel: 27 Mar 15
 
High quality cork turntable mat for better isolation of the record from surroundings
Notes: During the past 20 years the quality of record players and vinyl records have improved dramatically. Acoustic feedback is one of the big problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound "muddy". So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player.

In order to reduce acoustic feedback from the surroundings back to the record and the cartridge a lot of effort has gone into developing turntable mats that make the reproduced sound crystal clear with great separation and detail. This has been done by experimenting with various materials which absorb unwanted vibrations which were not present in the original recording. Now many people are trying to combine these different materials as a sandwich at the same time in order to reach better results. Now Tonar offers you this opportunity to experiment yourself but at modest pricing.

In order to enhance the better contact between the record and the mat, the center part - with the dimensions of the label have been recessed to accommodate the thicker label part.

- Diameter 295 mm.
- Thickness 3 mm.
Read more
 2 in stock $14.60
Cat: 567728 Rel: 27 Mar 15
 
White perspex turntable mat for isolation of the record from surroundings
Notes: During the past 20 years the quality of record players and vinyl records have improved dramatically. Acoustic feedback is one of the big problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound "muddy". So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player.

In order to reduce acoustic feedback from the surroundings back to the record and the cartridge a lot of effort has gone into developing turntable mats that make the reproduced sound crystal clear with great separation and detail. This has been done by experimenting with various materials which absorb unwanted vibrations which were not present in the original recording. Now many people are trying to combine these different materials as a sandwich at the same time in order to reach better results. Now Tonar offers you this opportunity to experiment yourself but at modest pricing.

In order to enhance the better contact between the record and the mat, the center part - with the dimensions of the label have been recessed to accommodate the thicker label part.

- Diameter 295 mm.
- Thickness 3 mm.
Read more
 2 in stock $19.60
Cat: 683835 Rel: 27 Mar 15
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


During the past 20 years the quality of record players and vinyl records have improved dramatically. Acoustic feedback is one of the big problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound "muddy". So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player.

In order to reduce acoustic feedback from the surroundings back to the record and the cartridge a lot of effort has gone into developing turntable mats that make the reproduced sound crystal clear with great separation and detail. This has been done by experimenting with various materials which absorb unwanted vibrations which were not present in the original recording. Now many people are trying to combine these different materials as a sandwich at the same time in order to reach better results. Now Tonar offers you this opportunity to experiment yourself but at modest pricing.

In order to enhance the better contact between the record and the mat, the center part - with the dimensions of the label have been recessed to accommodate the thicker label part.

- Diameter 295 mm.
- Thickness 3 mm.
Read more
 1 in stock $16.21
Cat: 567679 Rel: 24 Mar 15
 
1 litre bottle of vinyl cleaning fluid for record cleaning machines
Notes: This record cleaning fluid made for use in all types of record cleaning machines currently on the market is only suitable for vinyl records (Important do not use with old 78 RPM shellac records as the liquid may do irreparable damage). Now what is so special about the QS-TONAR vinyl cleaner compared to similar looking competing products on the market?

QS-TONAR liquid has an extremely low surface tension
- Only because of this reason QS-TONAR liquid can penetrate right to the bottom of the grove where other fluids seem to penetrate, but actually just stay lying on top of the record surface.
- Only QS-TONAR liquid cleaner soaks the dust, dirt, air pollution as well as residue from previously used cleaners, fatty deposits remaining from the original record pressing process, even fungi and molds caused by records having been stored in humid conditions etc.
- QS-TONAR liquid detaches all of the mentioned dirt from the walls of the grove after which the brushes in the machine can easily wipe the groove completely clean. The amount of residue remaining in the grove is negligible - this contrary to almost all other liquids currently on the market.
- QS-TONAR liquid is much more volatile than other liquids reducing the drying time of the record to a minimum.
- QS-TONAR liquid has another property causing the dirt to remain floating in the liquid rather than settling back at the bottom of the grove.
Read more
 3 in stock $16.33
Cat: 567681 Rel: 25 Mar 15
 
Record cleaning fluid in spray form, 500ml bottle
Notes: This liquid is the exact same liquid as the Tonar QS Vinyl cleaner, but now supplied in a spray can that is convenient to use for small cleaning jobs together with the TonarWetgoat brush made of pure goats hair.
Read more
 2 in stock $10.08
Cat: 309178 Rel: 09 Mar 12
 
Replacement stylus for Tonar Banana cartridge
Notes: The Tonar Banana stylus is designed for top performance of Tonar Banana DJ cartridge. Always keep a spare to be on top of your style and music.
Read more
 6 in stock $30.49
Cat: 567775 Rel: 26 Mar 15
 
Replacement Diabolic E DJ stylus with elliptical tip
Notes: Replacement Diabolic E DJ stylus with elliptical tip
Read more
 2 in stock $30.50
Cat: 567667 Rel: 27 Mar 15
 
Basic stylus cleaning brush for protecting your stylus & prolonging the life of your vinyl
Notes: Basic stylus cleaning brush for protecting your stylus & prolonging the life of your vinyl
Read more
 3 in stock $2.17
Cat: 699417 Rel: 14 Aug 18
 
Replacement stylus
Notes: Tonar replacement needle/stylus for Shure SS-35-C. Diamond tip.
Read more
 More than 10 in stock $20.15
Cat: 567759 Rel: 25 Mar 15
 
Tape head demagnetizer tool for removing magnetic electrical charge from reel-to-reel & cassette tape recorders
Notes: The unwanted magnetic charge, which is generated on the recording and playback heads during use is removed by this electronic, demagnetising wand in an electronic manner.

Once used effectively, the sound is clear. Demagnetising takes only 3 to 5 seconds for each head.

Important! As a very strong magnetic field is generated by this accessory, do not use it if you have a pace-maker and do not use in the close vicinity of friends or family with a pace-maker.

*This product has a european-style 2-pin plug*
Read more
 4 in stock $19.60
Cat: 567704 Rel: 25 Mar 15
 
760g brass record weight for imporoving playback of warped records, and reducing vibrations through turntable platter
Notes: Any vibrations in the record during playback will be picked by the cartridge and will be reproduced by the amplifier and speakers causing muddy sound, distortion and reduced detail. In order to avoid record vibrations you must make sure that the contact between the record and the platter is as perfecrt as possible.The tonar record clamp presses the record flat against the platter. Put the record on the turntable and then put the clamp on the spindle, press down & turn the knob to tighten. The weight of the clamp is minimal so it can be used on any record player with a fixed spindle.

Also many older manufactured records are warped to varying degrees, this causes big problems for the diamond stylus of the cartridge to track the grooves properly. The stylus pressure fluctuates as the stylus moves up and down while trying to track the warps. With bad results: muddy sound reproduction with distortions and if the turntables drive isn't really strong... audible flutter. In some cases the stylus may actually loose contact with the groove causing a hissing sound. Using the Tonarclampit will press the record onto the turntable platter, and the problematic surface will be flattened while you play the record causing a dramatic improvement of the reproduced sound on old records.

Take care that the platter bearing of your turntable is able to accept the additional weight of 760 g. If in any doubt please consult your record player instructions or your dealer before buying or using this weight.

760 grams Brass weight
Covered with black enamel for protection
Measurements: 78 mm x 25 mm

Base covered with felt to protect the record label
Read more
 2 in stock $54.46
Cat: 567663 Rel: 25 Mar 15
 
Record cleaning brush manufactured from goats hair, designed for use with liquid
Notes: This brush is manufactured from pure goat hair and is used to clean records using liquid. The shape of the bristles is such that they are perfect for entering the record grooves and cleaning them thoroughly.
Read more
 4 in stock $17.97
Cat: 664293 Rel: 20 Sep 17
 
Record cleaning brush manufactured from goats hair, designed for use with liquid
Notes: The Tonar Woodgoat is a high quality goats hair brush for cleaning your records. The shape of the bristles is such that they are perfect for applying cleaning fluids, entering the record grooves and cleaning them thoroughly.
Read more
 1 in stock $24.51
Items 1 to 46 of 46 on page 1 of 1

Filter

Tonar
Release Date
Featured
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now
Close