Tags: Eurorack cases

Notes: At 84hp wide the NiftyCASE isn't super tiny or super huge, in fact, it's just right for all of the cardboard boxes bought to ship it to you in. Aside from the 84hp width NiftyCASE features ample +12v -12v and +5v power for your modules. It will also take Din MIDI from any DIN MIDI device and USB MIDI from your computer and turn it into eurorack compatible CV, gate, mod, and clock.

MIDI to CV, gate, clock, and mod

It's all built into the case. Make your instrument and don't waste precious hp (space for modules) on power and MIDI tools. you can plug NiftyCASE into your computer via USB or 5pin MIDI DIN device and send it MIDI. It will convert it into CV, gate, mod, and clock. Sequence with your DAW, jam with your controllers, or do something wacky, NiftyCASE has got you covered.

Power

Built-in power saves space for more of your modules, and keeps things good and easy.

As is, you can plug up to 10 modules into NiftyCASE's 10 gang flying bus that provides a peak 1500mA of +12v, 500mA -12v, and 500mA +5v, covering all industry standard power requirements

Specs:
Useable case area = 84hp
Internal depth = 55mm
Weight = 1.8kg
6.8cm x 44.6cm x 18.6cm
Range of cv out 1 = 0-10V
Range of cv out 2 = 0-10V
Voltage output gate 1 - off =0 on =5(off = 0 on = 4.65)
Voltage output gate 2 - off =0 on =5(off = 0 on = 4.65)
Voltage output mod = 1-10V
Voltage output clock - off =0 on =5
Power output for modules
+12V - 1500mA peak output**
-12V - 500mA peak output**
+5V - 500mA peak output**
1/4" ts mono output on rear
MIDI in via USB and 5 pin Din
MIDI thru via 5 Pin Din and USB

Included in the box:

NiftyCASE
NiftyCASE switching power supply with blades for NA, EU, UK, and AU

* Please note that the right and left sides of NiftyCASE fit very flush. It is recommended to favour a module with a pcb 1mm or more narrower than it's front panel for use on the left and right sides of the case (this amount or more of tolerance is fairly common on many modules).

** The NiftyCASE power supply is designed only to power modules that are being used in the NiftyCASE. Modifying the case or using it otherwise to power external cases & external modules is not advised.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod60 is 60HP with 1.34" (34mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod60 includes twenty (20) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod20 is 20HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: NiftyBUNDLE is a collection of Cre8audio's most essential euro rack synth components:

Case, modules, power, MIDI to CV, and "enough patch cables to get into trouble" are all included.

The NiftyBUNDLE is made up of the following Cre8audio components:

NiftyCASE

The Cre8audio NiftyCASE is a moderately sized euro rack case with HUGE possibilities!

NiftyCASE is more than just a basic eurorack case; it provides all the power and connection possibilities you could possibly ask for. NiftyCASE offers a beefy 2A of cumulative current via its +12v -12v and +5v power rails, ideal for all your modules.

Connecting your NiftyCASE to computers or MIDI devices is a breeze thanks to the built-in MIDI to CV conversion. NiftyCASE takes either DIN-MIDI from any DIN-MIDI device or USB-MIDI from your computer and turns it into eurorack compatible CV, gate, mod, and clock signals.
NiftyCASE's DIN-MIDI thru lets you easily daisy-chain multiple NiftyCASES and easily integrate NiftyCASE with your MIDI equipment.

The NiftyCASE is the perfect size for a portable eurorack case being 84hp wide; that means NiftyCASE isn't super tiny or super huge- it's just the right size for all of the cardboard boxes they're shipped in.

Chipz and Cellz modules

Chipz is a chiptune-inspired eurorack synth module, which will take you back to the halcyon sounds of the '80s.

Cre8audio describe chips as ideal for those who speak "bleep blop". They say that Chipz is "full of heaping piles of beeps, blops, and probably some other stuff too. It's got a couple of voices and some wacky LFO junk, perfect for getting your body wobbling"

Putting all of that into language you might understand a little more, Chipz is a dual VCO and dual LFO module with each offering sine, triangle, saw, square, and noise waveforms.

Cellz is another wacky module from the deranged minds over at Cre8audio. A programmable CV touchpad where each touch segment can be tuned to 2 different CV values then played by hand, sequenced, and arpeggiated.

Box 'O' Cables & Blanking Panels

To get you up and running, the NiftyBUNDLE also comes with Cre8audio's Box 'O' Cables, allowing you to get patching and making noise straight away. The NiftyBUNDLE also includes some Cre8audio branded panel blanks to fill empty eurorack space.

Included in the NiftyBUNDLE:
NiftyCASE
NiftyCASE 15v 2.4A PSU
Chipz
Cellz
Box 'O' Cables
2x Cre8audio "8" panel blanks

Specifications:

Useable case area = 84hp
Internal depth = 55mm
Weight = 1.8kg
6.8cm x 44.6cm x 18.6cm
Range of cv out 1 = 0-10V
Range of cv out 2 = 0-10V
Voltage output gate 1 - off =0 on =5?off = 0 on = 4.65?
Voltage output gate 2 - off =0 on =5?off = 0 on = 4.65?
Voltage output mod = 1-10V
Voltage output clock - off =0 on =5
Power output for modules
+12V - 1500mA peak output**
-12V - 500mA peak output**
+5V - 500mA peak output**
1/4" ts mono output on rear
MIDI in via USB and 5 pin Din
MIDI thru via 5 Pin Din and USB

Notes: ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.

The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.

These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.

Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.

Great modern cases

The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.

A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.

The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.

Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.

6U / 52 HP

Provides up to 1 Amp power on each -12V & +12V rails.
Connections for up to 9 modules on busboard, with additional 'flying bus board' included that adds up to 12 connectors.
Includes 2 Amp power 'brick'

Notes: RackBrute 3U is a comprehensive Eurorack housing, transport, and protection solution. Featuring configurable positions, dependable power supply, and maximum practicality, you can be assured your precious modules will be well guarded.

Don't worry; your beloved modules are under heavy guard.

Modular gear is a precious commodity, and you need a versatile housing and security system to accommodate them. A first glance, you'll see that this is a perfectly fitted 3U, 88 HP case made of a light but strong aluminium chassis, fitted with wood side panels.

Deceptively simple, RackBrute is far more than a simple box. It includes many smart additions, such as the included +12V / -12V / +5V power supply that ensures that keeps everything up and running, and the multi-position handle system that not only lets you carry your collection with ease, but also lets you deploy an optimal operating angle, whatever your preference.

Ready for anything

Secure an unobstructed viewpoint over the theatre of operation, and hold the position 'til further orders.

In addition to keeping your modules safe and secure, RackBrute 3U gives you total control of the situation, no matter the context. The first of its secret weapons is the Link fastening system. Paired with the included handle, it will let you choose one of several configurations and orientations for your modular arsenal. Whether you want your gear stealthy and prone, or standing to attention, RackBrute is at your command.

The second trick up its sleeve is the stalwart, ever-reliable, power supply module. Including two independent circuits to supply common modular voltages, it will more than cover your need for +12V, -12V and +5V, providing up to 1600mA in total.

Thirdly, its robust power rail includes a sophisticated noise-filtering technology, and provides 20 standard slots to leave plenty of space for your collection.

Once you're powered, in position, and locked down, you'll feel like your modular rig could withstand a siege.

Joining forces with allies

Always remember the Modular Republic's motto: Unity is strength.

The Link fastening system not only equips the RackBrute 3U, but also its large-calibre sibling, RackBrute 6U as well the MiniBrute 2 and MiniBrute 2S. No matter the combination you go for, you can make the most out of your extensive module collection, or create a powerful EcoSystem with the extensive CV/Gate connectivity of the MiniBrute 2 and 2S.

It's also worth noting that although this technology comes straight from the top secret Arturia research labs, they are working for the greater good. The Link system is patent-free, so you can expect more and more Link-enhanced equipment to become available in the near future.

Do not wait for reinforcements, bring them yourself.

Let's move out

Arturia have made sure that your gear would arrive without any scratches.

When carrying precious cargo, dozens of fragile modules, a unique and irreplaceable collection, you need to be certain of their safety. With RackBrute 3U, you have nothing to fear: from the handle, all the way to the threaded nut strips, you'll find strong aluminum and steel. Wherever you go, however long your journey, however heavy your setup, RackBrute was built to last. Even transporting two RackBrutes or a RackBrute and a MiniBrute 2 is totally risk-free thanks to the built-in Spacers, eliminating any chance of collision.

If you are planning an undercover mission, the dedicated, discrete RackBrute Travel Case will keep your precious equipment free from harm.

When you need to take your show on the road, rehearse, or even just rearrange your creative space, you can depend on RackBrute.

What's in the box

Box content:

RackBrute 3U unit
Power cord
Instrument dimensions
Size : 19 x 6.6 x 3.3 inches (484 x 167 x 83mm)
Weight : 4.7 lbs. (2.1 Kg)

Main Features:

Eurorack format, 88 HP
Aluminum Chassis
Provided with a 5 HP power module
Up to 1600mA on +12V and 1600mA on -12V (2 separate circuits of 800mA)
Up to 900mA on 5V (USB + 5V modules)
Power rail with noise filtering
20 standard power slots with up to 800mA on +12V and -12V
Link system and smart handle to fasten a MiniBrute 2/2S or another RackBrute unit in various configurations
Built-in Spacers for the highest protection in transport configuration

Notes: ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.

The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.

These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.

Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.

Great modern cases

The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.

A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.

The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.

Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.

6U / 84HP

Provides up to 2 Amp power total on each -12V & +12V rails (1 Amp total per row)
Connections for up to 32 modules.
Includes 5 Amp power 'brick'

Notes: ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.

The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.

These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.

Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.

Great modern cases

The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.

A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.

The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.

Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.

3U / 52 HP

Provides up to 1 Amp power on each -12V & +12V rails.
Connections for up to 9 modules.
Includes 2 Amp power 'brick'

Notes: 3U 42 HP aluminium case

Depth: 42 mm

Kit includes:
- 42 hp case, M3 threaded holes
- 4 rubber feet

Notes: The 2-row rack for AE modular is 16 units wide with 2 rows; the MASTER module consumes 2 units so you have 30U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions: 41.3 x 21.7 x 4.5 cm (width x depth x height)

Notes: Make Noise's 208hp 7U 4 Zone CV Bus Case arrives ready to use. Just add modules, patch cables and inspiration. The powder coated metal construction offers excellent mechanical durability. The lid is removable and can be closed with the system fully patched. The sleek matte black finish was selected to match Make Noise's line of Black & Gold modules, and it looks great with just about any module installed. This finish will show the story of your modular synth's travels over the years.

The Make Noise 4 Zone Power Bus Board is a new approach to accommodating the ever-growing universe of Eurorack modules. The multi-zone solution is like having 4 independent bus boards in a convenient single bus board package. Each Zone features isolated +12 VDC and -12VDC supplies and a dedicated ground return path. The +5VDC supply is shared amongst all 4 zones.

The multiple section of the CV Bus was originally designed in 2013 for Alessandro Cortini's personal Make Noise system. It provides visual indication of level, rate and polarity for up to 4 control signals that will be shared throughout a patch. These 4 control signals are colour coded and distributed across the centre of the system allowing for quick, clean and intuitive patching. The distribution method is unlike the typical multiple since the control signals will appear beneath their possible destinations allowing for the use of shorter patch cables. The colour coding and visual indication makes navigating complex patches easier and more intuitive. Typically, the CV Bus would be used to share the most important control signals in a patch such as your Master Clock.

This new version of the CV Bus also includes useful modular utilities:

The Voltage Math is found at the left end of the CV Bus. Like the similar circuit on the 0-Coast, it is a small collection of universally useful modular utilities. The two inputs are summed at the output, one at unity and one adjusted by the input attenuverter. The attenuverted input is also normalled to a DC offset, for purposes of level shifting, voltage mirroring etc. The output strength and polarity is indicated by the Green and Red output LEDs.

A high quality Stereo Line Driver converts powerful modular synthesizer signal levels to the commonly used Line Level. There are mini-jack inputs for Left or Mono, and Right for Stereo sound, a single master volume control, as well as a stereo line output pair, and finally a TRS line/headphone out on a single jack. This output is capable of driving a long cable out to a PA System or a set of Headphones. It is AC coupled with a built-in limiting circuit (with visual indication) that prevents damage to ears and PA system when the patching gets experimental.

Includes

Two 104 hp 3U rows for Eurorack modules, One 104hp 1U row fitted w/ CV Bus
Hybrid switched/linear power solution for low noise and excellent load regulation
Multi-Zone, allowing isolation of noise-prone modules from noise-sensitive ones
Black powder coated metal w/ embossed logo on lid
Sealed to keep dust out during travel or storage
Lid offers space to close w/ your system patched
Recessed side mounted on/off switch and power inlet for safe travel
Locking power connector helps prevent on-stage power loss accidents
Solid carrying handle and rubber feet so the case travels w/ ease
Meets carry-on luggage size requirements for most airlines
Universal AC power adapter works world wide (Need IEC Cable for non-US outlets)
Blued Steel Stand sold separately

Specifications

Size: 7U
Total HP: 208 @ 3U, 104 @ 1U
Outer Dimensions:
22.25" x 14" x 7.25" w/ lid
Max Module Depth: 2.5"
Weight: 12.75 lbs. (w/ powered bus board, CV Bus installed)
Power: +12VDC @ 4A, -12VDC @ 2.4A and +5VDC @ 1A
Connectors: 32
Includes: CV Bus, Powered Bus Board, 120 Sliding M2.5 nuts w/ Black screws, AC Adapter

Notes: The 6U Flat 104 HP is an Eurorack case made of powder coated aluminum hi grade rails and wooden sides.

Sturdy: The powder coated aluminum ensures high durability. The case weight 2,4kg. The woodsides

Integrated power supply: The Eowave 6U Studio 104HP integrates "source d'energie" power supply, capable of providing stable and reliable power to your modular system. It has the power capacity of 1.8A+12V / 1.5A -12V / 1A 5V . The power supply block is also delivered with the case.

Flexible installation depth: The maximum installation depth of 5,5cm cm offers space for a wide variety of modules.

Elegant finish: The aluminium as a sanded texture and side panels of the case are Acrylic black. if you need to later make a larger custom case, behind the metal eowave sticker is a hole made to run a power ribbon cable through and connect two cases.

A total of 208HP
PSu included/
Source d'energie included : 1.8A+12 1.5A -12 1A 5V
34 available keyed power bus slots
Dimensions : 55,5cm (L) x 27 cm (W) x 7 cm (H)
Weight: 2,4kg

Notes: 104hp wide with two 3U rows and a 1U row.
Powder coated aluminum construction
VESA mount compatible (100mm x 100mm)
Plastic handle for easy mobility
Metal feet can be installed to support multiple angles of jamming.
Secure latching lid with enough depth to keep your patches patched

Expandable

Lid - when you're ready to add more space, the lid can be expanded to be another 104hp x 7U. You can add another set of rails, power supply and power jack and double your available space. (Kit available)
Metal feet - The metal feet can have a pair of rails and rack mounted power added to support another 3U row of 104hp. (Kit available in future)

Connectivity

Audio jacks - set of four jacks for stereo in and stereo out.
MIDI jacks - DIN jacks to support IN, OUT, and THRU MIDI.
USB power - can be used for a lamp to light your case or to charge your phone while recording your set.

Dimensions
557mm x 334mm x 169mm
74mm depth for 1U and bottom 3U row
52mm depth for middle 3U row

Power
+12V - 3A (with plenty of allowance for in-rush current)
-12V - 3A
+5V - 3A (shared with USB power)
36 shrouded power headers

In The Box
Main case
Lid
Metal feet
Power adapter 20V at 6A

Notes: LOCI Crate 30 is a 30hp case for small Eurorack configurations. Supplied with strong 3D printed LOCI Rails (inspired by vector rails) and stainless steel threaded strips. At just L49.99 RRP inc VAT it's an incredibly affordable route into the modular synth world.

Great for small Eurorack Modular setups.
Assembled in seconds.
Super strong.
Precision laser cut from ethically sourced and renewable 6mm Oak veneer.
Beautifully detailed with laser etched logo.
Non-slip pads.

Notes: The 6U Studio 104 HP is an Eurorack case made of powder coated aluminium hi grade rails and wooden sides.

With its angle, it is well suited for a studio modular systems, it offers a useful width of 104 HP and a height of 6U.

Sturdy: The powder coated aluminium ensures high durability. The case weight 2,4kg. The woodsides

Integrated power supply: The Eowave 6U Studio 104HP integrates "source d'energie" power supply, capable of providing stable and reliable power to your modular system. It has the power capacity of 1.8A+12V / 1.5A -12V / 1A 5V . The power supply block is also delivered with the case.

Flexible installation depth: The maximum installation depth of 5,5cm cm offers space for a wide variety of modules.

Elegant finish: The aluminium as a sanded texture and side panels of the case are Acrylic black. if you need to later make a larger custom case, behind the metal Eowave sticker is a hole made to run a power ribbon cable through and connect two cases.

A total of 208HP
PSU included/
Source d'energie included : 1.8A+12 1.5A -12 1A 5V
34 available keyed power bus slots
Dimensions : 55,5cm (L) x 29 cm (W) x 10,6cm (H)
Weight 2,4kg

Notes: The uBASE-QS 2 module is the carrier (or BASE) for four micro modules and explicitly designed for use in the QUICKSWAP CASEs. This carrier module can be plugged into the QS case as any other module; then, the uModules can be plugged in and removed itself into it, even with the AE system running, so you can reconfigure or add needed functions in form of micro modules "on the fly".

A number of sockets provide access to the bus signals, like CV, gate, cotroller, MIDI start/stop/clock.

Included is a small "key" to lift also modules without knobs in an easy way.

Notes: The uBASE module is the size of a regular AE modular module and is the carrier (or BASE) for three micro modules of 1/3 size or two of 1/2 size. The uModules can be plugged in and removed easily, even with the AE system running, so you can reconfigure or add needed functions in form of micro modules "on the fly".

Included is a small "key" to lift also modules without knobs in an easy way.

Notes: The 1-row QUICKSWAP CASE for AE Modular is the high-end case for AE Modular. It is based on a sturdy metal chassis with a beautiful matte black powder coating and - allows to plug in AE modules without any screws, which is a key feature of this case! The design makes sure that the modules sit firmly inside the case and the bus connection is established automatically by the integrated bus board, so need for the separate bus cable known from the standard AE cases. Rearranging your modular system can't be easier!

This case is developed by Kyaa, a 3rd party AE module developer; Tangible Waves is producing the case.

With a connector kit, another QUICKSWAP CASE of same width can be attached at certain angles, depending on the connector - and the power supply is linked between the cases, also via the connector.

Other utilities, like a handle for carrying a folded case, are coming soon.

Please note: This rack does not include the Master or Power module.

To connect the case to power you have the following options:

Install the Master Module
Install the Power Module
Connect to another, already powered QUICKSWAP CASE
Connect to another AE case via the RACKLINK module kit

*** Please note: the modules are not included, they are shown for demonstration purposes only. ***

Notes: The uCASE is designed to hold AE micro modules of 1/3 size. It is available in the same widths like the other AE cases (12, 16, 20 units). It contains sockets for uModules over the whole width, so no need for extra carriers for the uModules. The uModules can be plugged in and removed easily, even with the AE system running, so you can reconfigure or add needed functions in form of micro modules "on the fly".

The bus connection to the parent case is made with a short ribbon cable, so the uCASE gets it's power supply plus other bus lines from there.

The functionality is basically the same as the uBASE module; here, to groups of four uModules the bus lines lie CV, GATE, MIDI clock etc. can be assigned individually (not used by the currently available uModules, but will become relevant for future uModules).

Included is a small "key" to lift also modules without knobs in an easy way.

Notes: EcoSynth is a small, portable Eurorack modular case solution, designed for your desktop! It's a practical solution designed to save your hard-earned cash for modules. If you're looking for a small desktop solution to augment other desktop electronic hardware, this is for you. If you need a larger case, EcoSkiff passes on the savings for more traditional size racks like 84HP and 104HP.

Save on money and space: get just as much HP as you need!

Available in the following sizes:
24HP
44HP
64HP
84HP
104HP

Features and specifications:

Over-current protection: shuts off each power rail automatically if modules use too much current on that rail
The skiff goes together with just a Phillips head screwdriver!
Comes with 3mm slide nuts
Max module depth: 44mm
Max module depth above power supply: 33mm

Specifications, 24HP-44HP:
Power output:
+12V @ 1A
-12V @300mA
5V@ 150mA
Power connectors: 2 (plus optional flying bus cable)

Specifications, 64HP-104HP:
Power output:
+12V @ 2A
-12V @750mA
5V@ 1.5A
Power connectors: 15
Daisy chains to another EcoSkiff, Skiff Power, Five Amp Power, or Schottkey DC

Requires a 12V 5A center positive power brick with a 5.5mm x 2.1mm tip.
Assembly required, but no soldering needed.

Notes: Introducing the n-1 case, a sleek, thoughtfully designed Eurorack modular case for sound and music makers. Our flat-packable case interlocks and slides together, requiring no tools to assemble. Later in the year, we will be launching a range of accessories that will provide further versatility to the n-1 case. These add-ons will allow you to customize your case to suit your unique preferences, ensuring it remains an adaptable companion on your evolving musical journey.

What's in the box?
12mm plywood frame
3mm plywood back
4 dowel pins
1 pair of aluminum rails
M5 hex socket screws
M3 rail slide nuts
mystery stickers!
*case is unpowered, giving users the freedom to choose a panel-mounted power supply or adapt an internal power option.

Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:

Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module

Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.

Notes: The 1-row QUICKSWAP CASE for AE modular is the high-end case for AE modular. It is based on a sturdy metal chassis with a beautiful matte black powder coating and - the key feature of this case - allows to plug in AE modules without any screws! The design makes sure that the modules sit really firm in the case and the bus connection is established automatically by the integrated bus board, so need for the separate bus cable known from the standard AE cases. This means, rearranging your modular system can't be easier!

This case is developed by Kyaa, a great 3rd party AE module developer; tangible waves is producing the case. We are happy about this great cooperation and this marvellous addition to our product range!

With a connector kit, another QUICKSWAP CASE of same width can be attached at certain angles, depending on the connector - and the power supply is linked between the cases also via the connector.

Other utilities, like a handle for carrying a folded case, are coming soon.


Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:
Install the Master Module
Install the Power Module
Connect to another, already powered QUICKSWAP CASE
Connect to another AE case via the RACKLINK module kit

Notes: EcoSynth is a small, portable Eurorack modular case solution, designed for your desktop! It's a practical solution designed to save your hard-earned cash for modules. If you're looking for a small desktop solution to augment other desktop electronic hardware, this is for you. If you need a larger case, EcoSkiff passes on the savings for more traditional size racks like 84HP and 104HP.

Save on money and space: get just as much HP as you need!

Available in the following sizes:
24HP
44HP
64HP
84HP
104HP

Features and specifications:

Over-current protection: shuts off each power rail automatically if modules use too much current on that rail
The skiff goes together with just a Phillips head screwdriver!
Comes with 3mm slide nuts
Max module depth: 44mm
Max module depth above power supply: 33mm

Specifications, 24HP-44HP:
Power output:
+12V @ 1A
-12V @300mA
5V@ 150mA
Power connectors: 2 (plus optional flying bus cable)

Specifications, 64HP-104HP:
Power output:
+12V @ 2A
-12V @750mA
5V@ 1.5A
Power connectors: 15
Daisy chains to another EcoSkiff, Skiff Power, Five Amp Power, or Schottkey DC

Requires a 12V 5A center positive power brick with a 5.5mm x 2.1mm tip.
Assembly required, but no soldering needed.

Notes: EcoSynth is a small, portable Eurorack modular case solution, designed for your desktop! It's a practical solution designed to save your hard-earned cash for modules. If you're looking for a small desktop solution to augment other desktop electronic hardware, this is for you. If you need a larger case, EcoSkiff passes on the savings for more traditional size racks like 84HP and 104HP.

Save on money and space: get just as much HP as you need!

Available in the following sizes:
24HP
44HP
64HP
84HP
104HP

Features and specifications:

Over-current protection: shuts off each power rail automatically if modules use too much current on that rail
The skiff goes together with just a Phillips head screwdriver!
Comes with 3mm slide nuts
Max module depth: 44mm
Max module depth above power supply: 33mm

Specifications, 64HP-104HP:
Power output:
+12V @ 2A
-12V @750mA
5V@ 1.5A
Power connectors: 15
Daisy chains to another EcoSkiff, Skiff Power, Five Amp Power, or Schottkey DC

Requires a 12V 5A center positive power brick with a 5.5mm x 2.1mm tip.
Assembly required, but no soldering needed.

Notes: EcoSynth is a small, portable Eurorack modular case solution, designed for your desktop! It's a practical solution designed to save your hard-earned cash for modules. If you're looking for a small desktop solution to augment other desktop electronic hardware, this is for you. If you need a larger case, EcoSkiff passes on the savings for more traditional size racks like 84HP and 104HP.

Save on money and space: get just as much HP as you need!

Available in the following sizes:
24HP
44HP
64HP
84HP
104HP

Features and specifications:

Over-current protection: shuts off each power rail automatically if modules use too much current on that rail
The skiff goes together with just a Phillips head screwdriver!
Comes with 3mm slide nuts
Max module depth: 44mm
Max module depth above power supply: 33mm

Specifications, 24HP-44HP:
Power output:
+12V @ 1A
-12V @300mA
5V@ 150mA
Power connectors: 2 (plus optional flying bus cable)

Specifications, 64HP-104HP:
Power output:
+12V @ 2A
-12V @750mA
5V@ 1.5A
Power connectors: 15
Daisy chains to another EcoSkiff, Skiff Power, Five Amp Power, or Schottkey DC

Requires a 12V 5A center positive power brick with a 5.5mm x 2.1mm tip.
Assembly required, but no soldering needed.