New releases last eight weeks: DJ Equipment

Notes: 45RPM Record Adapter Key Chain-Lobster Claw Style

Genuine 45rpm record adapter key chain.

Easy to use "Lobster Claw" style.

Spring action clasp makes loading keys a snap!

A must for any record collector 45 head.

Notes: 45RPM Record Adapter Key Chain-Lobster Claw Style

Genuine 45rpm record adapter key chain.

Easy to use "Lobster Claw" style.

Spring action clasp makes loading keys a snap!

A must for any record collector 45 head.

Notes: 45RPM Record Adapter Key Chain-Lobster Claw Style

Genuine 45rpm record adapter key chain.

Easy to use "Lobster Claw" style.

Spring action clasp makes loading keys a snap!

A must for any record collector 45 head.

Notes: 45RPM Record Adapter Key Chain-Lobster Claw Style

Genuine 45rpm record adapter key chain.

Easy to use "Lobster Claw" style.

Spring action clasp makes loading keys a snap!

A must for any record collector 45 head.

Notes: 45RPM Record Adapter Key Chain-Lobster Claw Style

Genuine 45rpm record adapter key chain.

Easy to use "Lobster Claw" style.

Spring action clasp makes loading keys a snap!

A must for any record collector 45 head.

Notes: Limited Edition Djay Control Vinyl and Skipless Scratch Samples

I.S.P Presents : The Fugitives of Funk - 12" Vinyl

Djay (algoriddim) team up with the scratch power house that is the I.S.P ( D-Styles / Shortkut & Q-Bert) to give you The Fugitives of Funk 12" control vinyl. With original scratch samples on side A all produced by the Invisibl Skratch Piklz and the Djay control tone on side B.

This limited edition pressing is available in 2 colours orange and white.

Track listing

Side A
ISP SIDE

Break record / Scratch contents
Tr1-Tr15 Total 15 tracks

Side B
Djay control tone side
10min side

Notes: Limited Edition Djay Control Vinyl and Skipless Scratch Samples

I.S.P Presents : The Fugitives of Funk - 12" Vinyl

Djay (algoriddim) team up with the scratch power house that is the I.S.P ( D-Styles / Shortkut & Q-Bert) to give you The Fugitives of Funk 12" control vinyl. With original scratch samples on side A all produced by the Invisibl Skratch Piklz and the Djay control tone on side B.

This limited edition pressing is available in 2 colours orange and white.

With the white version pressed onto ultra thin vinyl.

Track listing

Side A
ISP SIDE

Break record / Scratch contents
Tr1-Tr15 Total 15 tracks

Side B
Djay control tone side
10min side

Notes: ***B-STOCK: Box opened, product in perfect working order***


Genuine standalone all-in-one DJ system courtesy of Denon's battery-powered Prime Go. Up to four hours of battery life (you can plug it in too) in a two-deck setup with HD touchscreen, effects and lots more.

*** Engine DJ 3.1 Performance Software for Hardware (OS) - Update June 2023 ***

New Features

Touch FX - Use the touchscreen to control and interact with FX in a whole new way. Touch FX bring powerful effect combinations to your fingertips. Swipe in any direction to instantly create build-ups, drops, and transitions. The added ability to latch Touch FX allows you to focus on other aspects of your mix while the effect remains active. Touch FX are available for all Engine DJ devices, including Media Players, however, the selection of available Touch FX will vary by the device.

New Touch FX include: Filter Echo, Filter Reverb, Filter Roll, LFO Echo, Filter Dub Echo, Filter Gate, Noise Gate, Flanger, LFO Filter, Filter

New Main FX - Denon DJ devices receive 26 new and updated Main FX. This suite of new dynamic effects provides DJs with easy-to-use tools to build energy, create drama, aid with transitions, and individualize their performances.

New Main FX include: Echo Out, Swell Verb, Hold Echo, Recycler, Stutter Out, Riser, Pitch Down, Scale Down, Reverb, LFO Verb, Reverb Drop, Reverse Reverb, Reverb Rise, Flanger (-), Beat Break, Backspin, Brake, Roll

All effects now offer a Frequency parameter, allowing you to apply the effect to a focused frequency range.

Sampler Updates

Sampler audio can be routed to any available channel or the Main output. To change the Sampler routing, open Settings and choose the Mixer tab.
The Sampler pad mode can now also be accessed by pressing the ROLL pad mode button twice without holding the Shift button. (Denon DJ hardware)
The sampler volume setting is now remembered between power cycles.
Added the ability to read Smartlists created in Engine DJ (Desktop).

Improvements and Fixes

Track Preview can now be routed directly to the headphones for instant track previews without setting the cue source in advance. (PRIME 4)
Reworded Effect parameter reset behavior setting to make it clearer.
Fixed an issue where the Date Added field was incorrectly setting newly added tracks as the day before.
Fixed an issue where the internal SATA drive would not show up as a source immediately after updating.
Fixed an issue where a track remained in the Prepare list when loading to a deck in certain situations.
Improved peak hold behavior on all products that have peak hold VU meters.
Other various stability enhancements & improvements

Engine DJ Preparation Software (Desktop)

New Features

Smartlists - Automatically organize songs from all connected drives into playlists based on the criteria or rules that you specify. To create a Smartlist, click the Smartlist icon on the Collection folder or right-click on an existing Playlist and select 'Create Smartlist'. You can easily turn a Smartlist into a regular playlist by right-clicking the Smartlist and choosing 'Convert to Playlist'. This creates a Playlist with the same name & content as the Smartlist.

Improvements and Fixes

Fixed an issue that prevented the highlighted track from updating when bulk editing metadata.
Fixed an issue where the Date Added field was incorrectly setting newly added tracks as the day before.
Fixed an issue where Serato beat grids were not imported correctly.
Other various stability enhancements & improvements

Supplier's Notes:
*** Introducing Engine DJ version 3.0 ***

This product is compatible with Engine DJ 3.0, visit enginedj.com for more info.

Comprising of Desktop and OS platforms, Engine DJ is the world's first, and most advanced, embedded creative platform for DJs.

Internet-ready music streaming

Access premier music streaming services directly on Engine DJ compatible devices via Wi-Fi or wired connection without the need of a computer. Log in to your favourite music streaming service and start playing. Set and recall hot cues and loops as you would with physical media.

Control and sync music with lights

Automatically sync your DJ set with DMX, Nanoleaf and Philips Hue Smart Lights. Simply raise the channel fader and press play to see the automatic and synchronized light show. Get creative by customizing the light show on-the-fly with a variety of touchscreen controls.


Supplier's Notes:
With up to 4-hours of builtin, lithium-ion battery power, PRIME GO is the ultimate, backpackable, most portable standalone DJ console ever. Prepare DJ sets on a plane, train or car, use as a fully featured pro-grade back-up for larger events, or play outdoor, mobile, after-party or club gigs.

Powered by a dedicated, multi-core internal processor, the PRIME GO runs 'Engine OS.' A purpose-built embedded software platform built for DJs offering you super-fast track load times, intuitive navigation, management, and search, so you can be at your creative best. The mission for Engine OS is clear, to keep evolving, providing more creative features to enhance the DJ's performance and experience.

PRIME GO's, 7" HD Touchscreen gives DJs tactile control of digital media library navigation, waveform views plus track search and load. It offers familiar 'touch/swipe' control over WiFi streaming of premier music services and enables direct, onboard recording to connected USB/SD media.

Small in size but BIG in connectivity and DJ workflow features. PRIME GO has independent dual mic control, pro-grade I/O and 24-bit/44.1kHz audio quality. All critical pro-DJ features are at hand, including dual-FX engines, 2-deck mixing, auxiliary input plus bank switching performance pads.

7", HD multi-touch display for waveform views, music library navigation, track preview, search and load.

Assignable Beat FX module and in-line Sweep FX/Filter combine for creative audio contouring.

Dual-bank (2x4) ultra-responsive trigger pads for hot cue juggling, looping and beat rolls.

With built-in Wi-Fi and an Ethernet Link port for hardwired internet connections, the PRIME GO connects you with your favorite music streaming service or personal cloud storage without being tethered to a computer. Log in to your streaming account directly on the unit for instant access to the world's largest music collections. The PRIME GO offers a vast array of streaming service options including Beatport/Beatsource Streaming, SoundCloud GO+, and TIDAL, so whatever the genre the PRIME GO has you covered. If that's not enough, connect your Dropbox account to access your personal music collection remotely from anywhere in the world.

No sacrifice of line faders with 2 independent, level controlled mic channels plus 1/4" jack and mini-jack headphone monitoring.

Pristine 24-bit/44.1kHz audio quality with 2-channel mixer, crossfader and 3-band EQ control. Timestretch and Key Shift functions for creative 'Open-Format' DJing.

Audio
Frequency Response: 20 Hz - 20 kHz (+/- 1 dB)
Dynamic Range: > 109 dB (A-weighted)
Signal-to-Noise Ratio: > 92 dB (A-weighted)
Channel Separation: < -88 dB (1 kHz, unity)

Headroom:
Aux: > 15 dB
Mic Input: > 20 dB
Outputs: > 15 dB

T.H.D.
Aux: < 0.01% (1 kHz, unity)
Microphone: < 0.02% (1 kHz, unity)

Analog Input:
Aux: +15 dBV (maximum), 0 dBV (unity)
Microphone: -40 dBV (unity), -54 dBV (minimum)

Analog Output:
Master, Balanced: +18 dBu (maximum), +4 dBu (unity)
Master, Unbalanced: +15 dBu (maximum), 0 dBu (unity)
Booth: +18 dBu (maximum), +4 dBu (unity)
Headphone Output: < 40 mW

Connections:
(2) XLR outputs (master left/right, balanced)
(1) RCA output pair (master left/right, unbalanced)
(2) 1/4" (6.35mm) outputs (booth left/right, balanced)
(1) 1/4" (6.35mm) stereo output (headphones)
(1) 1/8" (3.5mm) stereo output (headphones)
(1) RCA input pair (line-level, unbalanced)
(2) XLR + 1/4" (6.35mm) inputs
(1) USB ports (for USB drives)
(1) USB port (to computer)
(1) SD card slot
(1) Ethernet port
(1) Power adapter input

Power:
Connection: DC, Center Positive
Voltage: 19V 3.42A
Consumption: 30W maximum
Dimensions (Width x Depth x Height): 411mm x 274mm x 53mm/16.2" x 10.8" x 2.1"

Weight (Without USB and Power Cable)
8.11 lbs./3.68 kg

Notes: The new CTRL Case DDJ-REV5 is a super lightweight and compact hard shell case, offering a safe and comfortable way to carry (incl. shoulder-strap) your Pioneer DDJ-REV5 controller. Made of lightweight and rigid Durashock moulded EVA shell, the inside is equipped with high density EVA foam corners and egg-crate foam to protect the jog wheels, knobs and faders.

Fits

Pioneer DDJ-REV5

Basics

Crafted from 8 mm thick and rigid Durashock molded EVA foam and water rejecting polyester exterior shell
Sturdy zipper
Incl. removable egg-crate foam and high-density EVA foam corners for ultimate protection
Comfortable, rivet reinforced carrying handles and shoulder strap
Compatible with Decksaver cover

Specs

Outer measures: 83 x 46 x 14 cm
Inner measures: 73 x 37 x 11 cm
Weight: 3 kg

Notes: Upgrade your Hercules T7 so it becomes a true scratching machine! With this you get 3 mini Innofader Plus faders already soldered to a board which drops straight into the Hercules T7. No soldering or adjustments needed for installation...faders are already pre-adjusted for tight cut-in < 1.0mm. User accessible calibration buttons on all 3 faders allow for further precision adjustments. Also includes a sleek see-through acrylic mounting plate.

Notes: These groovy slipmats from the Glowtronics glow-in-the-dark series don't really need any further explanation. The design speaks for itself!

Notes: Glowtronics' new and improved Glow-in-the-Dark Slipmats are the only full colour glow-in-the-dark slipmats produced on planet earth. These improvements include a super soft top surface with small ribbed fibres. The fibres help clean your vinyl record while in use. All slipmats come with a specialised Glazed bottom surface, which has become the industries professional standard in slipmats. So, you can throw your wax paper and plastics in the trash; Glowtronics' Glazed surface is putting "SLIP" back into SLIPMAT.

Notes: UV Blacklight Slipmats

1 Packaged Pair of Professional Grade Slipmats

Glowtronics new UV/Blacklight Activated Slipmat use full colour dye sublimation printing process to achieve the bright glowing printed designs.

Place a blacklight close to the slipmats and watch the UV colours shred through the darkness!!!

These slipmats come with Glowtronics' specialized Glazed bottom surface, which has become the industry's professional standard in slipmats.

So.... you can throw your wax paper and plastics in the trash; this Glazed surface is putting "SLIP" back into SLIPMAT.

UV / Blacklight can not be 100% colour matched, UV inks alter certain colours when printed.


Weight: 0.35 lbs
Dimensions: 14 × 11 × .15 in

Notes: The water tank is compatible with Model HG01 HumminGuru ultrasonic vinyl record cleaner only.

*The water tank is not microwavable.

Notes: Silver version of the second-generation Technics GR series turntable. Upgraded Delta-Sigma Motor Drive gives unparalleled stability and top-notch sound quality.

Supplier's Notes:
The improved motor-drive circuit centered on the newly developed ?S-Drive (Delta Sigma Drive) thoroughly suppresses any minute vibrations generated from the motor. This is the first stage of Technics' new generation of direct drive turntables that aim for further improvements in sound quality.

Features

New Motor-Drive System, AE-Drive (Delta Sigma Drive)

The AE-Drive is a new system that applies Technics' expertise in PWM signal processing. In addition to reducing high harmonics, the new drive suppresses vibrations from the motor for smoother, more accurate rotation, ensuring a rich reproduction of the music.

The First Stage of The New Generation of Technics' Direct Drive Turntables

Since inventing the world's first direct drive turntable, Technics has continued to work to improve sound quality. It has now developed the AE-Drive, which suppresses minute vibrations from the motor and improves the electromagnetic conversion accuracy of the cartridge. The first stage of direct drive turntable systems featuring this technology is the SL-1200GR2.

Coreless Direct Drive Motor Achieving Stable Rotation

In 1970, Technics commercialised the world's first direct drive turntable, and the system took the world by storm. Unlike belt drive and other systems, direct drive systems rotate the motor at low speed and directly drive the platter, thus providing numerous advantages, such as the almost complete absence of degradation in S/N ratio due to motor vibration and deceleration mechanisms, as well as high reliability over a long period time because of not requiring parts replacement.

And in 2016, Technics developed the twin-rotor, surface-facing, coreless direct drive motor with rotor magnets placed on both sides, thereby eliminating the rotation irregularity of the motor, referred to as "cogging," which was a unique issue for direct drive systems. This motor was adopted for the SL-1200G, which once again drew a significant response in the hi-fi market. The SL-1200GR2 inherits the same design philosophy with the new development of a single-rotor, surface-facing, coreless direct drive motor, resulting in the elimination of cogging.

Multi-Stage Silent Power Supply

Low-Noise Switching Circuit

Use of a high-speed switching power supply ensures a stable supply capacity and less ripple and humming. Applying a switching power supply to a turntable eliminates the need for a large transformer and countermeasures for the ensuing mechanical vibrations.
A switching frequency of above 100 kHz limits the impact of noise on the music playback bandwidth.

Current Injection Active Noise Cancelling

This technology combines a noise detection device with an error amplifier. It detects residual noise in the power supply and applies an inverse phase current to remove noise components. It removes low frequency noise more effectively than a regulator to ensure a more ideal power supply.

Pursuing Rigidity and Vibration Damping Characteristics

The platter achieves high rigidity and vibration damping characteristics by using a two-layer construction with deadening rubber applied to the entire rear surface of the aluminium die-cast to eliminate the unnecessary resonance that is otherwise relayed to the record, thereby producing clear sound.

To increase the inertial mass and reduce vibration, the shape of the aluminium die-cast portion was optimized by simulation. At 2.5 kg (including the rubber mat), the SL-1200GR2 platter is 0.8 kg heavier than that of the previous SL-1200MK5. Also, the back surface of the platter has strengthening ribs added to improve rigidity. Increasing the surface area of contact with the deadening rubber achieves damping characteristics that are more than twice those of the SL-1200MK5.

Tonearm Achieving High Initial-Motion Sensitivity

The tonearm tracks the rotation of the record and enables reading with high precision, and the tonearm inherited by Technics is the traditionally used static-balance universal S-shaped tonearm, employing an aluminium pipe with excellent light weight and rigidity for the material of the tonearm pipe.

With its gimbal suspension construction, the tonearm bearing section uses a cut-processed housing that employs high-precision bearings, as in the SL-1200G and SL-1200GR. The high initial-motion sensitivity of 5 mg or less is achieved through manual assembly and adjustment by skilled Japanese artisans. This enables the grooves etched into the records to be accurately traced.

In addition, one type of auxiliary weight comes included, and the cartridge can be swapped with a variety of other cartridges to match the music genre or feeling. (Applicable cartridge weight when using the supplied auxiliary weight: 10 - 16.4 g (not including the supplied head shell))

Turntable Section

Drive Method: Direct Drive
Motor: Brushless DC motor
Turntable Speeds: 33-1/3, 45 and 78 rpm
Pitch Adjustment Range: +/-8% and +/-16%
Starting Torque: 2.2 kg cm
Build-up Characteristics: 0.7 s. from standstill to 33- 1/3 rpm
Braking system: Electronic brake
Wow and Flutter: 0.025%? W.R.M.S.

Turntable Platter
Aluminum diecast
Diameter: 332mm
Weight: Approx. 2.5kg (Including a rubber sheet)

Tonearm Section

Type: Static Balance
Effective Length: 230mm
Overhang: 15mm

Tracking Error Angle
Within 2- 32' (at the outer groove of 30cm(12") record)
Within 0- 32' (at the inner groove of 30cm(12") record)

Offset Angle: 22-
Arm Height Adjustment Range: 0 - 6mm
Stylus Pressure Adjustment Range: 0 - 4g (Direct Reading)
Headshell weight: Approx. 7.6g
Applicable Cartridge Weight Range
(without auxiliary weight): 5.6 - 12.0g
3.1 - 9.5g (using cartridge spacer)
14.3 - 20.7g (including head shell)
(with auxiliary weight): 10.0 - 16.4g
7.5 - 13.9g (using cartridge spacer)
18.7 - 25.1g (including head shell)

Cartridge Mounting Dimension: 12.7 mm (1/2") interval
Head Shell Terminal Lug: 1.2mm? 4-pin terminal lug

Terminals

Audio Output: PHONO (Pin Jack) x 1, EARTH TERMINAL x 1

General

Power Supply: AC220-240 V, 50/60 Hz
Power Consumption: 11 W (ON), 0.3 W (OFF)
Dimensions (W x H x D): 453 x 173 x 372 mm
Weight: Approx. 11.5kg
Operating temperature range: 0C to +40C
Operating humidity range: 35% to 80% RH (no condensation)
Accessories: Turntable, Turntable sheet, Dust cover, EP record adaptor, Balance weight, Auxiliary weight, Cartridge spacer, Head shell, Overhang gauge, Screw set for cartridge, PHONO cable, PHONO earth lead, AC power supply cord,
Owner's Manual

Notes: Second-generation version of the updated Technics GR series turntable, now with improved motor control. Black SL-1210 version offers subtle style paired with precise, accurate sound.

Supplier's Notes:
The improved motor-drive circuit centered on the newly developed ?S-Drive (Delta Sigma Drive) thoroughly suppresses any minute vibrations generated from the motor. This is the first stage of Technics' new generation of direct drive turntables that aim for further improvements in sound quality.

Features

New Motor-Drive System, AE-Drive (Delta Sigma Drive)

The AE-Drive is a new system that applies Technics' expertise in PWM signal processing. In addition to reducing high harmonics, the new drive suppresses vibrations from the motor for smoother, more accurate rotation, ensuring a rich reproduction of the music.

The First Stage of The New Generation of Technics' Direct Drive Turntables

Since inventing the world's first direct drive turntable, Technics has continued to work to improve sound quality. It has now developed the ?S-Drive, which suppresses minute vibrations from the motor and improves the electromagnetic conversion accuracy of the cartridge. The first stage of direct drive turntable systems featuring this technology is the SL-1200GR2.

Coreless Direct Drive Motor Achieving Stable Rotation

In 1970, Technics commercialised the world's first direct drive turntable, and the system took the world by storm. Unlike belt drive and other systems, direct drive systems rotate the motor at low speed and directly drive the platter, thus providing numerous advantages, such as the almost complete absence of degradation in S/N ratio due to motor vibration and deceleration mechanisms, as well as high reliability over a long period time because of not requiring parts replacement.

And in 2016, Technics developed the twin-rotor, surface-facing, coreless direct drive motor with rotor magnets placed on both sides, thereby eliminating the rotation irregularity of the motor, referred to as "cogging," which was a unique issue for direct drive systems. This motor was adopted for the SL-1200G, which once again drew a significant response in the hi-fi market. The SL-1200GR2 inherits the same design philosophy with the new development of a single-rotor, surface-facing, coreless direct drive motor, resulting in the elimination of cogging.

Multi-Stage Silent Power Supply

Low-Noise Switching Circuit

Use of a high-speed switching power supply ensures a stable supply capacity and less ripple and humming. Applying a switching power supply to a turntable eliminates the need for a large transformer and countermeasures for the ensuing mechanical vibrations.

A switching frequency of above 100 kHz limits the impact of noise on the music playback bandwidth.

Current Injection Active Noise Cancelling

This technology combines a noise detection device with an error amplifier. It detects residual noise in the power supply and applies an inverse phase current to remove noise components. It removes low frequency noise more effectively than a regulator to ensure a more ideal power supply.

Pursuing Rigidity and Vibration Damping Characteristics

The platter achieves high rigidity and vibration damping characteristics by using a two-layer construction with deadening rubber applied to the entire rear surface of the aluminium die-cast to eliminate the unnecessary resonance that is otherwise relayed to the record, thereby producing clear sound.

To increase the inertial mass and reduce vibration, the shape of the aluminium die-cast portion was optimized by simulation. At 2.5 kg (including the rubber mat), the SL-1200GR2 platter is 0.8 kg heavier than that of the previous SL-1200MK5. Also, the back surface of the platter has strengthening ribs added to improve rigidity. Increasing the surface area of contact with the deadening rubber achieves damping characteristics that are more than twice those of the SL-1200MK5.

Tonearm Achieving High Initial-Motion Sensitivity

The tonearm tracks the rotation of the record and enables reading with high precision, and the tonearm inherited by Technics is the traditionally used static-balance universal S-shaped tonearm, employing an aluminium pipe with excellent light weight and rigidity for the material of the tonearm pipe.

With its gimbal suspension construction, the tonearm bearing section uses a cut-processed housing that employs high-precision bearings, as in the SL-1200G and SL-1200GR. The high initial-motion sensitivity of 5 mg or less is achieved through manual assembly and adjustment by skilled Japanese artisans. This enables the grooves etched into the records to be accurately traced.

In addition, one type of auxiliary weight comes included, and the cartridge can be swapped with a variety of other cartridges to match the music genre or feeling. (Applicable cartridge weight when using the supplied auxiliary weight: 10 - 16.4 g (not including the supplied head shell)

Specs

Size and Weight

Height: 173mm
Width: 453mm
Depth: 372mm
Weight: 11.5kg
*Approx.

Coreless direct drive motor achieving stable rotation
AE-Drive suppresses vibrations from the motor for smoother, more accurate rotation
Low-noise, low-voltage power circuit and a switching power supply
Two-layer platter with high rigidity and vibration damping
Tonearm achieving high initial-motion sensitivity
High-rigidity body and high-damping silicon insulators for smooth sound and isolation from various vibrations

Turntable Section

Drive Method: Direct Drive
Motor: Brushless DC motor
Turntable Speeds: 33-1/3, 45 and 78 rpm
Pitch Adjustment Range: +/-8% and +/-16%
Starting Torque: 2.2 kg/cm
Build-up Characteristics: 0.7 s. from standstill to 33- 1/3 rpm
Braking system: Electronic brake
Wow and Flutter: 0.025%?W.R.M.S.
Turntable Platter: Aluminium diecast
Diameter: 332mm
Weight: Approx. 2.5kg (Including a rubber sheet)

Tonearm Section
Type: Static Balance
Effective Length: 230mm
Overhang: 15mm

Tracking Error Angle
Within 2- 32' (at the outer groove of 30cm(12") record)
Within 0- 32' (at the inner groove of 30cm(12") record)
Offset Angle: 22-
Arm Height Adjustment Range: 0 - 6mm
Stylus Pressure Adjustment Range: 0 - 4g (Direct Reading)
Headshell weight: Approx. 7.6g

Applicable Cartridge Weight Range (without auxiliary weight): 5.6 - 12.0g
3.1 - 9.5g (using cartridge spacer)
14.3 - 20.7g (including head shell)
(with auxiliary weight) 10.0 - 16.4g
7.5 - 13.9g (using cartridge spacer)
18.7 - 25.1g (including head shell)

Cartridge Mounting Dimension: 12.7 mm (1/2") interval
Head Shell Terminal Lug: 1.2mm 4-pin terminal lug

Terminals

Audio Output
PHONO (Pin Jack) x 1
EARTH TERMINAL x 1

General

Power Supply: AC220-240 V, 50/60 Hz

Power Consumption
11 W (ON)
0.3 W (OFF)
Dimensions (W x H x D): 453 x 173 x 372 mm
Weight: Approx. 11.5kg
Operating temperature range: 0C to +40C
Operating humidity range: 35% to 80% RH (no condensation)

Accessories: Turntable, Turntable sheet, Dust cover, EP record adaptor, Balance weight, Auxiliary weight, Cartridge spacer, Head shell, Overhang gauge, Screw set for cartridge, PHONO cable, PHONO earth lead, AC power supply cord, Owner's Manual

Notes: Engineered with a 40mm speaker diaphragm made from stiff bio-cellulose to reduce distortion and increase transparency. Tuned for a balanced, accurate sound. Balanced sound - Bio-diaphragm.

Notes: Broadcast-ready version of ARS's genre-defining six-channel mixer, featuring wooden end cheeks to look as good as it sounds. Three-band hybrid iso-EQs, three-band isolator, elite sound quality.

Supplier's Notes:
6 channel table top mixer

MODEL9900BW (broadcast mixer) Music Mixer Wood TYPE (Headphone Monitor Trim: Cue-Mix-Pgm special version)

Pro type (Built-in house XLR output transformer Installed model)

ARS MODEL 9900 DJ Mixer is a Japanese made,6ch. rotary mixer with world's first 3band hybrid isoeq Hi-eq Mid-eq Low -Iso on each channel.

The ARS 9900 is Alpha Recording System's Flagship Table top mixer.

This 6 channel High Quality Rotary DJ Mixer has a 3 band Isolator on the master.

Potentiometer and Switch are ALL ALPS.

A long time in the development phase, this mixer is a beautiful example of Japanese hand made precision workmanship.

Highly recommended.

It is designed with purist ideals with only essential features.

ARS 9900 has 3 band hybrid iso-eq hi-eq mid-eq low-iso on each channel and 3band Iso on the master.

The Master Isolators can be boost of cut from +18db ~ -8.

The Ch hi-eq mid-eq can boost or cut from +12db ~ -12db. LOW-ISO boost of cut from +6db ~ -8.

Each channel has Post Fader Send. also Return and Effect Loop.

* Due to the Model-9900 is designed for a professional use, The body is no power switch to avoid accidentally power off while playing.

* Minimizing the power noise by designing the All circuit board and the power circuit board independently and setting them apart.

Specs

Input

Frequency Response: +-1dB 20Hz-20Khz
Input: 3 x Phono: 47K Ohm / 9 x Line: 20K Ohm
Effect Loop: RCA Unbalanced Impedance 20K Ohm
Return: RCA Unbalanced Impedance 20K Ohm

Output

House Output: RCA Unbalanced Impedance 1K Ohm/ XLR Balanced Impedance 100 Ohm(Built-in house XLR output transformer Installed model)
Booth Output: RCA Unbalanced Impedance 1K Ohm/ XLR Balanced Impedance 100 Ohm
Tape Output: RCA Unbalanced Impedance 1K Ohm

Effect Loop: RCA Unbalanced Impedance 600 Ohm
Effect Return: RCA Unbalanced Impedance 600 Ohm
Send Output: RCA Unbalanced Impedance 600 Ohm
Retrun: RCA Unbalanced Impedance 20K Ohm
Isolator Frequency Response:
3band hybrid isoeq 1-4Ch /Low-ISO /MID-EQ/HI-EQ
Master 3Band Iso: 10 - 300 Hz / 300 - 3000 Hz / 3000 - 20000Hz boost of cut from +18db ~ -8.

Headphone Monitor Trim: Cue-Mix-Pgm
Power Consumption: 30w
Power Requirement: US-115V/EU-230V(Selectable) 50/60Hz
Dimensions: (W)460 x (H)280 x (D)100 mm
Front Panel Colour: Black
Because of natural wood, the grain and colour may differ from the photos.

Notes: Just look at it. Stunning hand-made audiophile business from Japanese audio specialists Alpha Recording System. Loosely Bozak-inspired but updated for maximum sound quality. A thing of beauty.

Supplier's Notes:
MODEL9900 Music Mixer STD Standard

ARS MODEL 9900 DJ Mixer is a Japanese made, 6ch. rotary mixer with the world's first 3band hybrid isoeq Hi-eq Mid-eq Low -Iso on each channel.

The ARS 9900 is Alpha Recording System's flagship table top mixer.

This 6 channel High Quality Rotary DJ Mixer has a 3 band isolator on the master.

Potentiometer and switch is All ALPS.

VU meter made by Sifam

Classic knob and Aluminum Machine Component Knob Cap by Made in Japan

A long time in the development phase, this mixer is a beautiful example of Japanese hand made precision workmanship.

Highly recommended.

It is designed with purist ideals, with only essential features.

ARS 9900 has 3 band hybrid iso-eq hi-eq mid-eq low-iso on each channel and 3band Iso on the master.

The Master Isolators can be boost of cut from +18db ~ -8.

The Ch hi-eq mid-eq can boost or cut from +12db ~ -12db. LOW-ISO boost of cut from +6db ~ -8.

Each channel has post fader send. also return and effect Loop.

* Due to the Model-9900 is designed for a professional use, The body is no power switch to avoid accidentally power off while playing.

* Minimizing the power noise by designing the All circuit board and the power circuit board independently and setting them apart.

Specs

Inputs

Frequency Response: +-1dB 20Hz-20Khz
Input: 3 x Phono : 47K Ohm / 9 x Line: 20K Ohm
Effect Loop: RCA Unbalanced Impedance 20K Ohm
Return: RCA Unbalanced Impedance 20K Ohm

Output

House Output: RCA Unbalanced Impedance 1K Ohm/ XLR Balanced Impedance 100 Ohm
Booth Output: RCA Unbalanced Impedance 1K Ohm/ XLR Balanced Impedance 100 Ohm
Tape Output: RCA Unbalanced Impedance 1K Ohm

Effect Loop : RCA Unbalanced Impedance 600 Ohm
Effect Return: RCA Unbalanced Impedance 600 Ohm

Power Consumption: 30w
Power Requirement: US-115V/EU-230V(Selectable) 50/60Hz
Dimensions: Body (W)420 x (H)260 x (D)90 mm
Front Panel Colour: Black

Notes: A proper bargain here. Ecler's flagship rotary mixer offers all the benefits of audiophile sound quality and organic, hands-on control at a surprisingly low price point.

Supplier's Notes:
WARM4 is a professional four channel analogue rotary DJ mixer, designed and manufactured by ECLER in Barcelona. Featuring 4 phono/line channels, 2 MIC inputs, classic sharp filters and a 4th order Isolator. WARM4 includes an unique feature, an Analogue Subharmonic Synthesizer selectable per channel, specially designed to generate and reinforce ultra-low frequencies.

Applications

Night Clubs
DJ studios
Itinerant DJ performances

Audio performances

Inputs:

Number of Inputs:
LINE: 4 Stereo Unbalanced Inputs
PHONO: 4 Stereo Unbalanced Inputs
MICRO: 2 Mono Balanced Inputs
FX RETURN: 1 Stereo Unbalanced Input

Connectors type:
LINE 1-2-3-4: RCA STEREO
PHONO 1-2-3-4: RCA STEREO
MICRO 3: XLR3-F
MICRO 4: Combo XLR3F-6.3mm TRS BAL
FX RETURN: RCA STEREO

Inputs Sensitivity nom/Impedance:
LINE: 0dBV/50kO
PHONO: -40dBV/50kO
MICRO: -50dBV/>1kO
FX RETURN: 0dBV/>6kO

PERFORMANCE:

Frequency Response:
LINE: 10Hz#30kHz -1dB
MICRO: 10Hz#25kHz -1dB
PHONO: RIAA i0.5dB
FX RETURN: 10Hz#50kHz -1dB

THD+N:
LINE: <0.004%
MICRO: <0.7%
PHONO: <0.06%
FX RETURN: <0.001%

CMMR:
MICRO: >75dB @ 1kHz

Signal Noise Ratio:
LINE: >105dB
MICRO: >90dB
PHONO: >100dB
FX RETURN: >110dB

Trim control / Tone control Inputs 1-2-3-4:
INPUTS 1-2-3-4: i 15dB
BASS: +10/-30dB
MID: +10/-25dB
TREBLE: +10/-30dB

Trim control / Tone control Isolator:
BASS: +12/-70dB
MID: +12/-40dB
TREBLE: +12/-70dB

Tone Filter cut frequency at -6dB (slope 12dB/oct):
BASS: 200Hz
MID: 200Hz#6.8kHz
TREBLE: 6.8kHz

Isolator cut frequency at -6dB (slope 24dB/oct):
BASS: 300Hz#4kHz
TREBLE: 4kHz

Analogue Subharmonic Synthesizer:
Input selective filter: 50#120Hz
Harmonics synthesis: 25#60Hz
Max Output level: +12dBV

OUTPUTS:

Number of Outputs:
HOUSE: 1 Stereo Balanced Outputs / 1 Stereo Unbalanced Outputs
BOOTH: 1 Stereo Balanced Outputs / 1 Stereo Unbalanced Outputs
HEADPHONE: 2 Stereo Unbalanced Outputs
FX SEND: 1 Stereo Unbalanced
REC: 1 Stereo Unbalanced

Connectors Type:
HOUSE: XLR3-M STEREO / RCA STEREO
BOOTH: XLR3-M STEREO / RCA STEREO
HEADPHONE: Jack Stereo 6.3mm / Jack Stereo 3.5mm
FX SEND: RCA STEREO
REC: RCA STEREO

Outputs Level/Minimum Load:
HOUSE (BAL): 0dBV/600O 1V *(+12dB 4V)
HOUSE (UNBAL): 0dBV/2.2kO 1V *(+12dB 4V)
BOOTH (BAL): 0dBV/2.2kO 1V *(+12dB 4V)
BOOTH (UNBAL): 0dBV/2.2kO 1V *(+12dB 4V)
REC: 0dBV/10kO
HEADPHONES: 200mO/200O THD 1%
FX SEND: 0dBV/2.2kO

Max Undistorted Output Level:
HOUSE (Electr.BAL): 21dBV (23dBu)
BOOTH (Electr.BAL): 21dBV (23dBu)
HOUSE (UNBAL): 21dBV (23dBu)
BOOTH (UNBAL): 21dBV (23dBu)

MICELLANEOUS
Control Mode: Rotary with Alps Blue Velvet Potentiometers and Alps RK09L potentiometers
Phantom Voltage: 18VDC/5mA Max (Default ON)
Input VU-Meter: LED 12 segments (-38dBV # +10dBV)
House-Mix-Booth VU-Meter: LED 12 segments (-30dBV # +20dBV)
Subharmonic Output VU-Meter: LED 3 Segments (-20dBV / 0dBV / +4dBV)

ELECTRICAL

Power Supply: Internal
AC Mains Voltage: 90-264VAC 47-63Hz
AC Main Connector: 15A IEC inlet connector
Rated power consumption: 39 VA

PHYSICAL
Operating Temperature: -5-C # 45-C / 23-F # 113-F
Operating Humidity: 20 - 90% RH (no condensation)
Storage Temperature: -10-C # 50-C / 14-F # 122-F
Storage Humidit : <90% RH (no condensation)
Operating Humidity: 20 - 90% RH (no condensation)
Installation Options: Desktop or Rack mount with optional accessories
Included Accessories: IEC Cable EU
Dimensions (WxHxD): 34.0 x 8.1 x 37.2 cm / 13.39 x 3.19 x 14.65 in
Weight: 5.32 Kg / 11.73 lb
Shipping Dimensions (WxHxD): 49.5 x 17.5 x 43.5 cm / 19.49 x 6.89 x 17.13 in
Shipping Weight: 6.74 Kg / 14.86 lb

MECHANICAL

Dimensions (without wooden sides) : 400 x 185 x 100mm / 15.7" x 7.2" x 3.9"
Weight : 3.6Kg / 7.94 lbs

Notes: In the fast-paced world of DJing, your equipment faces relentless intensity. Whether in action or at rest, safeguarding your prized Denon DJ SC Live 2 is an imperative.

Designed exclusively in the UK for the SC Live 2, this Decksaver cover is meticulously crafted from super smoked clear and durable polycarbonate, a robust transparent plastic renowned for its hard-wearing properties. Decksaver's commitment to quality is evident as each cover undergoes rigorous testing before earning the Decksaver name.

This cover acts as an impenetrable shield against dust, liquid, and unintended impacts. It preserves your faders and controls in pristine condition, even as it accommodates cables seamlessly.

Whether your SC Live 2 is in the studio, at home, or at the gig, our cover ensures unmatched protection. Transporting your equipment is effortless too; it effortlessly fits into your flight or soft case, offering maximum security while you're on the move.

Invest in the protection your equipment deserves.

The Denon DJ SC Live 2 Decksaver Cover - where innovation meets durability to safeguard your gear.

Dimensions

Weight: 1.095 kg
Length: 65.9 cm
Width: 40.4 cm
Height: 6 cm

Material: Smoked clear polycarbonate.

Notes: Step into the spotlight with confidence and ensure your DJ gear stays protected with the Headliner R2 Decksaver cover. Designed for the discerning DJ, the Headliner R2 lid is the ultimate protective solution for your prized mixer, allowing you to focus on your music without worries.

Crafted with precision and care, this Headliner R2 Decksaver cover offers a robust shield against dust, spills, and accidental impacts. Made from Decksaver's own smoked clear, high-quality polycarbonate, this cover keeps your gear pristine and free from scratches, preserving its stunning appearance and functionality.

Whether you're a DJ, producer, or live performer, your equipment is the lifeblood of your artistry. This custom-fit mould ensures that the Headliner R2 Decksaver cover embraces your gear like a second skin, providing easy access to all controls and connectors. With this cover, you can keep your setup ready for action at any moment, whether you're creating in the studio or rocking the stage.

Decksaver take pride in craftsmanship and commitment to quality. Each Decksaver cover design undergoes rigorous testing, guaranteeing it meets the highest standards of durability and reliability. Rest assured that your gear is well-protected, no matter where your musical journey takes you.

Join the ranks of top musicians and performers who trust Decksaver to safeguard their instruments. Elevate your musical experience, knowing that your Headliner R2 is shielded by the finest cover in the industry.

Unleash the full potential of your mix with the Headliner R2 Decksaver cover. Choose Decksaver, choose excellence, and choose to protect your music-making journey in style. Elevate your passion for sound and ensure your gear remains the star of the show - your musical masterpiece awaits!

Features Decksaver's own Soft-fit inserts to protect delicate wooden cheek panels.

Dimensions

Weight: 0.54 kg
Length: 22.8 cm
Width: 31.3 cm
Height: 4 cm

Material: Smoked clear polycarbonate.

Notes: Customized to transport and protect the new Pioneer DDJ-FLX4 and DDJ-400 Controller. Crafted from 9 mm vinyl laminated plywood, sturdy aluminium profiles and heavy duty butterfly latches, it provides you with secure transport and workstation in one. Thanks to the integrated gliding laptop platform and the convenient cable access port, the setup is ready for action in no time at all.

Fits

Pioneer DDJ-FLX4
Pioneer DDJ-400
Pioneer DDJ-SB3

Basics

Heavy duty construction of 9 mm vinyl laminated plywood
Solid aluminium profiles and spring loaded latches
Incl. gliding laptop platform (removable)
Full padded interior keeps controller well-protected
Detachable front cover/panel

Specs

Outer measures: 59 x 40 x 20 cm
Inner measures: 44 x 29 x 4,5 cm (Controller-compartment)
Weight: 8,8 kg

Notes: Customized to hold the Pioneer DDJ-REV5 Controller and a 19'' rack mount device (1U) such as a wireless microphone system, power strip or storage drawer. Crafted from 9 mm vinyl laminated plywood, sturdy aluminium profiles, heavy duty butterfly latches and smooth rolling wheels, this case provides ultimate protection for mobile use on the road. The included 19" rack mounting brackets allow individually fastening of a 1U 19" unit (or smaller devices) at the front underneath the controller.

Fits

Pioneer DDJ-Rev5

Basics

Heavy duty construction of 9 mm vinyl laminated plywood
Solid aluminium profiles and spring loaded latches
Incl. gliding laptop platform (removable)
Incl. two 19" rack mounting brackets to fix 1U devices underneath the controller
Full padded interior keeps controller well-protected
Detachable front cover/panel
Incl. recessed wheels for easy transportation
Solid rubber feet

Specs

Outer measures: 82,4 x 50,7 x 22 cm
Inner measures: 73,6 X 36,3 X 5 cm (Controller-compartment)
Weight: 17 kg

Notes: The ideal all-in-one portable PA system for live performances and DJ use. A versatile combination of mic and instrument inputs, with an internal battery for wireless use.

Supplier's Notes:
Portable battery powered speaker for performing musicians

Premium Portable Sound

The Alto Professional Busker is the battery-operated PA for the active on-the-go musical performers who demand top-tier sound in a portable solution that will be at home on any stage. With its optimized woofer and tweeter pairing for 200 watts of output, Busker delivers clear, focused sound that makes your music shine in any environment. Connect your mics and line level instruments or devices with the integrated 3-channel mixer with easily accessible control knobs to dial-in volume without stopping the music.

Powerful and Polished Performances

Give your vocals or guitars some extra shine and polish with the built-in Alesis FX processing for world class sound in even the most intimate settings, complete with dedicated knobs to adjust amounts independently. Busker features Bluetooth on Channel 3 to wirelessly

Your Way to Play and Perform Anywhere

200W of powerful, portable sound with 6.5"(165mm) woofer and 1" (25mm) tweeter
Battery Eco Mode for increased performance up to 24 hours
Compact, lightweight design that's easy to transport

Must-Have Creative Connections and Controls

Free Alto App (iOS/Android) for remote configuration and control
Bluetooth music streaming direct from your device
Integrated 3-channel mixer with built-in Alesis FX
2 XLR/TRS "Combo" inputs (for mics, instruments, & line level sources)
Aux input for non-Bluetooth devices

Sit, Stand, or Expand Your Busker

Versatile tilt or stand design for any setting
Use standalone or on a pole with DSP Speaker Use modes for tuned sound
Link two Buskers wirelessly via Bluetooth for stereo playback
Flexible horizontal and vertical monitor positions

All information subject to change altoprofessional.com stream backing tracks from your smart device. Play rhythm tracks while you jam along or rehearse with your favourite metronome app to keep your fingers loose before showtime. While you have your smart device out, pull up the free Alto App for iOS and Android to quickly load your favourite configuration settings. An available 1/8th AUX input means you can connect your favourite sound sources like drum machines or groove boxes to keep you on beat with one simple connection.

Road-Tested, Always Ready to Roll

Busker is built to travel from gig to gig seamlessly with a compact footprint that retains enough heft to pump out tight, punchy sound.

A rugged, durable exterior will stand up to the grind, while delivering the sound performance you can count on, night after night. Set it vertically on stage to enjoy accurate amplification, lay on an angle to project towards you, or pole mount it to keep your audience on their feet and immersed in your tunes. A dedicated XLR out enables a direct line to FOH or other destinations for those bigger gigs, all the while letting you enjoy your familiar custom-tailored sound up close and personally.

Long Lasting Battery

Maximize power in between charges with Battery Eco Mode, providing up to 24 hours of performance power. The Alto Professional Busker brings big sound to the best performers.

Technical Specifications

Output Power
Eco Mode: 50 W (peak)
Standard Mode: 200 W (peak)

Drivers
Low-Frequency: 6.5" (165.1 mm) woofer
High-Frequency: 1.0" (25.4 mm) tweeter

Max SPL 106 dB
Frequency Response 60 Hz - 20 kHz

Connectors
(2) Combo XLR-1/4" (6.35 mm) Inputs
(1) 1/8" (3.5 mm) AUX Input
(1) USB Charging Port
(1) XLR Line Out
(1) RCA Line Out
Charge Port 5V, 2.1 A

Bluetooth Specifications

Profile: A2DP, AVRCP
Version: 5.0 Codec: SBC
Frequency: 2402 - 2480 MHz Maximum Transmission Power: 10 dBm
Protocol: BLE
Range: 100 ft. (30.5 m)

Battery
Type: 6.6 Ah, 12 V, Lithium Ion
Life: Eco Mode: up to 90 hours; Standard Mode: up to 30 hours
Charging Time: 12 hours

Power
Connection: IEC
Voltage: 100-240 VAC, 50/60 Hz, 120 W; 220-240 VAC, 50/60 Hz; 120 W
Fuse: 100-120 V, T1.6AL AC250 V; 220-240 V, T0.8AL AC250 V