Search dance music

Notes: Reissued version of one of Dreadbox's back catalogue synths, the Erebus is a paraphonic design with two VCOs, a characterful low-pass filter, built-in delay and updated snappy envelopes.

Supplier's Notes:
Dreadbox's most unique sounding analogue synthesizer is finally back, warmer and snappier than ever!

All you synth lovers, the time has come to dive into the Erebus...

All Analogue Paraphonic Synthesizer
Faithful Reproduction of the Erebus V1
2 Oscillators with 2 Waveforms each
Separate Glide controls and Hard Sync function
2-pole Low Pass pre-fed Filter
1 ADSR envelope and a AR Amp Envelope
Snappier than the V1

OTA VCA
Lo-Fi Delay effect
Wide Range LFO
15 patch points for an astonishing and spectacular modular experience
Compact, USB powered, Eurorack Format (42HP)

Ethereal & Dreamy

Warm sounding Oscillators
Classic Dreadbox Filter
Snappy Envelope Generators
Lo-Fi Delay effect to expand your sound
CV outputs: Envelope, LFO, Mod Wheel, Gate, CV1, CV2
CV inputs: Osc1, Osc2, Echo, Cutoff, CV, Gate, LFO Rate, PW, VCA

Specifications & Connections

USB powered (1.5 Watts)
50 Playing hours with 20,000mA portable power bank
MIDI IN via DIN5
14 MONO TS Jack Out

Dimensions: 21.5 x 13 x 6.5 cm
Weight: 1 kg

Requirements:

USB-A Adapter (5v) with 1000mA or more
MIDI device or keyboard that is equipped with DIN5 midi output
Monitor, Amp or Headphones

Included in the box:

Erebus Eurorack module
42 HP case
1x DIN5 to 3.5mm adapter
1x Ribbon cable

Review: The Rolling Stones In Mono was first released in 2016 as a box-set charting the megagroup's entire roster of British and American studio albums. Deferring to the original mono playback format for which their music was originally recorded (and thus sounds best with) this monster compilation is a comprehensive look back at the Stones' 1960s heyday - plus their 2016 additional exclusives and rarities album, Stray Cats.

Notes: Stereo Field is one instrument with three uses. It is simultaneously a stereo/quad modular touch plate feedback atonal synthesizer, a stereo/quad audio processor and a pressure sensitive chaotic CV "controller". All three uses are available separately as well as simultaneously and in conversation with each other.

The Stereo Field allows its user to manipulate and patch two analogue stereo preamp circuits via touch plates. By utilizing skin conductivity as new paths for current to follow you are creating "new circuits" and new sounds in relation to where your fingers are patching. The individual touch plates are directly connected to nearly every connection point of every component in its circuitry (located directly under each corresponding touch plate).

When touched with multiple fingers it will create atonal analogue feedback with either of the two mirrored circuits represented by interlocking touch-plate circles. The resulting feedback can go beyond the abilities of human hearing (take caution!) and down to the very slow clicks of a saw waveform and both can often be happening simultaneously. These parallel mirrored circuits can be finger patched separately or together yielding vastly different chaotic results in regards to texture, timbre and stereo imaging. This instrument has the ability to create atonal synth tones in stereo (and quad) as well as process incoming stereo audio (and quad) sources via 1/4" and 3.5mm ins and outs. Incoming audio sources can be "patched" or rewoven into any area of either or both of the circuits via skin contact.

The two stereo input volume knobs (centre) shape and effect distortion, drive amounts, internal feedback pitch, and modulation rates depending on how your fingers are patching. The quad inputs and outputs via the 3.5mm jacks have small touch plates leading to and from allowing for touch access of each of the 4 inputs and 4 outputs. If multiple audio signals are traveling into the Stereo Field these audio sources can be intermingled and can modulate one another, again depending upon where your fingers are patching.

Sending CV signals into the 3.5mm input jacks will open up many more possibilities both in terms of synthesized sounds and audio processing. Since the two stereo circuits are mirror images of one another the 3.5mm ins and outs can also be thought of as (L/R,R/L) and when your hands get involved this imaging will be further confused and jumbled as your skin can intermingle all of these paths.

The Stereo Field can also be used as a controlled chaos source when using the 3.5mm outputs to send the feedback your hands create as CV to your modular system. Due to the nature of feedback and finger patching the 4 available CV signals have the ability to get incredibly complex, organic and textured in nature (see audio examples below in use with a euro-rack system). Because of the open nature of Stereo Field it can both send and receive CV modulation simultaneously. In addition, this can all be happening while your finger patching is changing and altering the incoming and outgoing CV while also processing incoming audio. These ins and outs can also be patched together with cables for sustained tones with the pitch/rhythm/volume/"cutoff" being affected by adjusting the incoming and outgoing volume knobs in various settings. Inter-patching in this way will also allow for sustained pulse beats and filter-esque sound shaping in addition to bringing new results to finger patching via the touch plates.

Most importantly, processed audio and synthesized audio are available simultaneously with the ability to influence and modulate each other. This will often blur the lines between the two; who is manipulating who, who comes out on top as audio and who is modulation? This can be a constantly evolving cycle based upon where the performers fingers are placed and highly sensitive skin contact pressure changes.

Notes: Protect Your Minimoog Model D

The Minimoog Model D SR Series Case features generous padding around a semi-rigid ABS shell, a rugged Ballistic Cordura outer that resists tears and abrasions, and laminated water-resistant zippers to offer on-the-go protection and safe storage for your instrument. Multiple strap and handle configurations keep your commute comfortable, and multifunction pockets ensure you're organized on arrival.

Developed with Artists for Artists

Musicians report the most important performance a case can offer are protection from impact and protection from water... in that order. With that in mind, Moog SR Series Cases have been developed to be the first line of defense for your synthesizer.

Complete Protection, Comfort, and Convenience

Multiple strap and handle configurations keep your commute comfortable, and multifunction pockets ensure you're organized on arrival.

Notes: The Precision VCO (PCO) is Serge's legendary oscillator. It combines raw vintage sound with astonishing precison.

The PCO is a versatile, voltage controlled oscillator now offering four high quality waveform outputs (sine, triangle, pulse and sawtooth) and both linear and exponential frequency modulation capabilities . A front panel switch conveniently extends the range of the PCO from the audio range (16 to 16,000 Hz) to a sub-audio range (.1 to 200 Hz) for use as a Low Frequency Oscillator.

EXCELLENT RESPONSE, TRACKING AND STABILITY: Featuring the identical exponential response, exceptional tracking characteristics, and perfect temperature stability as the NTO, the PCO is especially suited for use with the NTO or another PCO as a modulation source for dyanamic depth linear FM.

Two calibrated one volt per octave inputs as well as a variable processing input are provided for complex frequency control. FM depth can be varied with the front panel adjustment. A Sync input is also available for locking the PCO to another oscillator's fundamental, harmonic, or sub-harmonic frequency.

The Serge PCO is the only authorized version of Serge's classic design.

Some details of the Serge PCO eurorack module:

Authentic Serge design
Now with PULSE OUT
Variable oven temperature
Manufactured in Germany
Eurorack (3U) format, 18 hp
Power consumption: 75mA @ +12V, 60mA @ -12V
Skiff-friedly, Module depth: < 30mm

Notes: *** Version 1.3 features enhancesd drum tracks. ***

Portable hand-held sampler with serious power, originally launched on Kickstarter and now in production. One-touch sampling via a range of inputs, internal sequencer, built-in effects and resampling.

Supplier's Notes:
Easy Sampling

You can easily sample any sounds with the built-in microphone, your microphone or electric guitar connected to the input, or even a USB-connected smartphone or PC/Mac.

You can even sample applying an insert effect. For example, your electric guitar can be added to Distortion or your vocal to Compressor.

Sampled sounds can be quickly assigned to pads with auto-slicing, and can also be edited manually in detail by viewing the waveform display.

Sampled sounds can also be easily matched to the tempo and key of your song.

You can also resample a sequenced phrase of sampled sounds including applied effects.

Flexible Song-making

Each song project has 16 sequential parts called "Scenes". Each Scene has 10 sequencer tracks which can behave in different ways, as described below:

- Loop Track: Sequencer for a looping sample
- Shots Track: Sequencer for a single one-shot sample
- Drum Track: Step sequencer for drums
- Instrument Track: Piano roll type sequencer for musical instruments
- MIDI Track: Piano roll type sequencer for external MIDI equipment

Three additional Global Audio Tracks are available for longer recordings like vocals and external instruments. These tracks can record multiple takes which can be spliced into a final perfect version. Traditional "punch-in" style recording is also supported.

Easily structure a full song by sequencing scenes and setting how many times they repeat before moving to the next scene. You can set the order of scenes via a copy function.

A song can be mixed down through a mastering effect, and be exported to a single audio file or individual audio files (stem files) for each track.

Effortless Music Streaming

You can stream your music in perfect quality with a single USB cable, without any driver installation or troublesome menu settings.

You can livestream your voice and performance in real time while playing along with your song. And they can be controlled with crossfading and mixing with effects.

Massive Sample Libraries

More than 500 high-quality sample sounds are available (for download), so you can start creating a songs right away, even if it's your first time.

Samples you record are stored to the SD card. In Crad Reader mode you can download your recordings, or import new samples from your PC/Mac.

36 types of internal DSP effects can be used as the insert, send, and master effects.

Versatile Connectivity

The SmplTrek can connect to a wide range of audio sources such as, dynamic microphones, electric guitars/bass, synthesizers, and even USB audio sources from PC/MACs or smartphones.

The SmplTrek can output audio via two analog outputs, or digitally via USB for live streaming and direct DAW recording.

It can also synchronize its tempo with other devices using MIDI or audio sync.

Maximum Polyphony:
35 voices
+ LOOP track + SHOT track + DRUM track + INST track: 30 voices
+ GLOBAL audio track: 3 voices (3 mono tracks)
+ USB audio track: 1 voice
+ External source: 1 voice
(DRUM track and INST track have a maximum of 8 voices each track. MIDI track can also output up to 8 notes each track.)

Sampling/Recording:
48kHz-16bit linear
Sampling Time: Maximum sampling time (size) for a single sample is approximately 180 minutes in stereo (2 GB).
Recordable Data: Depend on SD card *SD card sold separately
Data Format: WAV
Resampling, auto-slicing, time-stretching, pitch-changing functions
*SmplITrek requires an SD card for sampling. Supported SD cards are SDHC cards up to 32 GB. (SDXC cards are not supported.)

Sequencer:
Each song project has 16 scenes
1 scene contains 10 sequencer tracks and 3 additional audio tracks
Track Type
Loop Track: Sequencer for a looping sample (Max 10 tracks/project)
Shots Track: Sequencer for a single one-shot sample (Max 10 tracks/project)
Drum Track: Step sequencer for drums (Max 1 track/project)
Instrument Track: Piano roll style sequencer for musical instruments (Max 3 tracks/project)
MIDI Track: Piano roll style sequencer for external MIDI equipment. (Max
10 tracks/project)
Max. number of bars: 128 bars in Scene
Note Length: 1/1~1/32
Various copy functions
Transpose function
Real-time and non-real-time recording
Metronome, pre-count function

Effects: 36 types (Insert, Send, Master Effects)
Pads: 15 velocity-sensitive pads with RGB LEDs
Controllers: Control knob x 5, Directional pad with 2 button controls
Display: 1.5 inch OLED display
Built-in Mic: Mono x 1 (Omni-directional, 94dBSPL)
Built-in Speaker: Mono x 1 (1.5W 4 O)

Connectors:

INPUT L / Guitar (Switchable 10kQ and 1MQ impedance) / Dynamic Mic
[LINE Gain] PAD: -20dB
[Hi-Z Gain] LOW: 0dB, NORMAL: +10dB, HI: +20dB
[MIC Gain] LOW: 0dB, NORMAL: +10dB
INPUT R / Dynamic Microphone
[LINE Gain] PAD: -20dB
[MIC Gain] LOW: 0dB, NORMAL: +28.8dB, HI: +50dB
STEREO LINE OUTPUTS (Max +6.5dBV)
*The above jacks are all balanced 1/4" TRS Jack Connectors
PHONES jack (stereo 3.5mm mini jack type)
USB port (micro USB Type-B)
[USB Audio] USB 2.0 Full Speed, 48kHz-16bit
Input: 2 channels, Output: 2 channels
[USB MIDI]
[Mass Storage Class] USB2.0 High Speed
*For iPhone, Apple Lightning to USB Camera Adapter required separately
MIDI IN connector (5-Pin DIN type)
MIDI OUT connector (5-Pin DIN type)
AUDIO SYNC IN jack (mono 3.5mm mini jack type)
AUDIO SYNC OUT jack (mono 3.5mm mini jack type)
SD card slot
DC IN connector

Power Supply:
DC12V output AC adapter (500mA, Inner Diameter: 2.1mm, Outer Diameter: 5.5mm, Polarity: Centre +)
Ni-MH AA SIZE Rechargeable Battery or Alkaline AA SIZE Dry Battery x 6
(Alkaline dry batteries life: approx. 4 hours)
*Batteries sold separately

Accessories:
AC Adaptor
Warranty
*SD card, USB cable and the other connection cables sold separately

Size and weight

Width: 147mm | approx. 5.8 inch
Depth: 175mm | approx. 7.8 inch
Height: 46mm | approx. 1.8 inch
Weight: 550g | approx.1 lbs 3.5 oz

Notes: The Shaped Dual EnvVCA is a two-channel analogue envelope generator with waveshapers and a stereo linear VCA. Unlike conventional analogue envelope modules, the waveform of each envelope can be controlled with a slider or CV without changing the envelope timing. With a wide time range from an hour to 2.5kHz, and a plethora of CV inputs and attenuverters, it can be used as an LFO, audio-rate oscillator, slew limiter, waveshaper, ASR/ADSR/complex EG, independent audio/CV VCA, envelope follower, sidechain processor, and general utility module. Each channel has dedicated linear outputs plus attenuverters and offset controls for the variable waveshape outputs, making it an ideal modulation source and stereo VCA.

100% analogue

Shaped Dual EnvVCA

20HP Eurorack format module
0.95" (24mm) maximum depth (includes power cable)
10-pin Eurorack power header

Power consumption
+12V: 255mA
-12V: 230mA

Audio/VCA
100k input impedance, 1k output impedance, DC-coupled
VCA gain range: -90dB to +2.0dB, linear response to CV from 0V to 5V
VCA unity gain: 4.4V CV
DC to 20kHz, +/-0.1dB

Envelope Times
Minimum rise or fall time: ~200us per segment (2.5kHz max frequency)
Maximum rise time: >20 minutes (typically > 40 minutes)
Maximum fall time: >12 minutes (typically > 20 minutes)

Jacks:
Env jack: Min = -10.2V, Max = +10.1V, maximum amplitude 9.3Vpp
Trigger jack: rising edge threshold = 1.25V
Follow jack: active range = 0V to +5V

EO* jacks:
EOR (channel A): <80mV low to >4.50V high gate output
EOF (channel B): <80mV low to >4.95V high gate output
Minimum stable pulse width: 1ms. Shorter than this may produce extra 50us pulses
Audio In/Out jacks: -10V to +10V maximum range without clipping

Notes: This module provides you with four motorised faders (aka flying faders) to be attached to your DROID master. You can attach up to 16 of these units (or any other DROID controllers) to one master, so the maximum number of faders on a DROID is 64. Below each fader is a touch button and an LED.

You can use the faders, the buttons and the LEDs in very flexible ways to control all parameters in your DROID patches, like steps of a sequence, volumes of channels of a digital mixer (controlled via MIDI with the X7), parameters of a large bank of envelopes, CV values that are organized in presets and much more.

The special thing about the motorized faders is that each fader can be assigned several functions or presets. When you switch the function, the fader moves to the exact position that corresponds to the current value. The usual Eurorack "picking up" of potentiometers or faders, where you never know exactly which value is currently set, is now a thing of the past.

Another unique feature is the "haptic feedback". If a fader is used, for example, in a sequencer to select a note from a scale, you can feel each individual note like an artificial notch. The fader intelligently creates these virtual grooves with its motor. This is very useful and very intuitive whenever you use the fader to select one out of several discrete values. Other examples are clock divider settings, the number of a preset, a waveform, a clock offset and much more. Due to the haptic feedback you don't need any display for seeing what you are doing. You can concentrate on making music and play very intuitively.

Another kind of haptic feedback is a kind of "pitch bend wheel", where the fader always pushes back to the center position by itself. Here the motor creates an artifcial spring. When setting analog values such as a volume or a filter cutoff, the fader then runs freely, of course.

Applications

The DROID plus the faders can be used for various applications - and due to the possibility of switching even at the same time! Here are some example:

A multi track performance sequencer
Use a MIDI controllable digital audio interface as mixer
Control a bank of four envelopes with A, D, S, R each with just four faders
Use the faders for CV presets
Use the faders and their haptic feedback for live performing with pitch bends, ratcheting and all other crazy stuff
Power
Motor faders need much energy. Theoretically one single fader can draw up to 800 mA when at full power. That seems to be the main reason why nobody dared in bringing motorised faders into Eurorack so far.

Der Mann Mit Der Maschine have solved that challenge by making use of the fact that the fader need their power always just for a very short time. The M4 unit comes with four big power tanks (called super caps) that are loaded with a low current but provide the full power when the faders need them. That way the maximum current of one M4 unit is limited. With jumpers on the back you can choose between a peak current of 350, 450, 500 or 600 mA.

Dimensions
14 HP
42 mm deep

Current Draw
350 mA +12V

Notes: ***B-STOCK: Box opened, product in perfect working order***


Improving feel and workflow, and making the best of hardware and software available in one place, Console 1 Fader allows you to raise the sound quality bar to new heights. Mixing a masterpiece isn't easy, but with Console 1 Fader there's no limit to what you can do. Now's the time.

Ten touch-sensitive 100 mm Alps motorized faders give premium professional feel and feedback, while the weighty powder-coated steel chassis means durability and substance in a sleek Scandinavian design.

Fader includes two console emulations (Tube and Discrete). Way more than a simple controller, Fader enriches the sound of your tracks in the same ways as a true analog console.

Riding faders is muscle memory for many mix engineers. For those of us who play the desk like an instrument, Console 1 Fader gives quick and intuitive control over volume, saturation, filtering, and much more.

The Console 1 mixing ecosystem is so much more than a simple DAW/plug-in controller. It's an efficient, elegant, and amazing-sounding modern mixing solution, combining hardware and software to give you the best of both worlds: the versatility, affordability, and usability of in-the-box mixing, alongside the workflow, feel, and focus dedicated hardware can bring.

Console 1 Fader can be used alone, or in combination with the original Console 1 channel strip controller for a tight 'complete desk' experience. You can even use multiple Console 1 Fader units to build the ideal workflow for your specific studio.

There are many ways to mix a masterpiece, but riding faders is a matter of muscle memory for a lot of us. And for good reason - reaching out and grabbing five or ten different sounds or groups at once, and quickly adjusting, listening, adjusting, listening, balancing... it's a full-body discipline, and software alone can't come close.

Tapping into the same purpose-designed software environment as the original Console 1 channel strip controller, Fader brings new levels of control over the wider world of your mix. You can ride up to ten channels at once, working volume, high-and-low-cut filter values, drive and drive character (modeled desk saturation), and more. Then page up for ten more channels. And ten more, until you have easy access to your whole mix, even when tracks number into the hundreds.

Expandable with world-class sounds
Because all the audio signal processing happens in our award-winning component-modeled software, you can switch out the 'circuitry' of your console instantaneously for a different desk sound across your whole project, or even channel by channel.

In addition to the two analog console sounds Fader ships with, you can purchase any of our Console 1 channel strips and use those classic desk sounds with Fader.

Selected features

Fader modes
Fader allows you to quickly and intuitively control track volume, drive level, drive character, input gain, low cut, high cut, and up to three send levels, all from the same high quality motorized faders.

Transport controls
The three assignable buttons work by default as basic transport controls for the major DAWs, but each can be assigned to a keycommand of your choice (e.g. CTRL+Z), for whatever use you can imagine.

Encoder
Mounted on a high-grade all-metal potentiometer, Console 1 Fader's single encoder offers control of pan per track, but also unlocks a powerful stereo spatialization tool, to widen or consolidate your individual tracks, situating each sound perfectly in your mix.

Layer mode
With our innovative new 'Layer Mode' you can create layers of tracks, putting many levels of mixing at your fingertips. Low cut all your guitars at once, or saturate your groups early on for a top-down effect in seconds.

In short
A 10-fader approach to Console 1, our hybrid hardware/software mixing ecosystem
High quality hardware, designed and built for both feel and function
Take fast and intuitive control of volume, saturation, filtering, and more
Two awesome-sounding component-modeled console emulations included
Expand your sonic options with Console 1 expansion channel strips (sold separately)
'Layer Mode' allows you to organise and affect your mix in powerful new ways
Spatializer tool offers fast per-channel control of stereo width
Works with all major DAWs straight out of the box - no MIDI-mapping required
Use alone, or in combination with the original Console 1 channel strip controller

Notes: Collabing with YouTube sensation Andrew Huang, Endorphin.es offer up this impressive multipurpose processor module. Building blocks of stereo filtering, compression, reverb and more offer huge creative potential.

Supplier's Notes:
In collaboration with Andrew Huang, based on his modern music production techniques, Endorphin.es developed a creative audio processor with multiple blocks that can be moved around in order to achieve different flavours for sound design.

Processing unit without fixed structure: intuitively create astonishing and ephemeral timbres, from atmospheric rumbles to heavy or distorted textures.
Creative stereo effect processor with delay, reverb, filter and distortion with quickly explorable routing chain with single button press.
New generation ARM Cortex - M7 processor with 96 kHz 32 bit internal processing.
Lush hall and whooshing reverse reverbs with audio freeze and pre-delay.
Sidechain audio ducking envelope available both internally and externally with additional one knob single band compressor.
Tap delay with maximum delay time up to 2.5 seconds, external clock input with onboard clock divider and 1v/oct time control.
8x oversampled distortion algorithm.
Pre- and post - VCA, tone and volume controls with extra gain.

Power consumption
135 mA +12V
35 mA -12V
0 mA 5V

Dimensions
16 HP
26 mm deep with power ribbon cable connected.

Notes: The Z8000 Matrix Sequencer is a modulation source like no other: The 16 knobs of the Z8000 are accessed by ten sequencers with their own clock, direction and reset inputs. The ten sequencers are as follows:

Four 4 step CV sequencers on the horizontal.
Four 4 step CV sequencers on the vertical.
One 16 step CV sequencer on the horizontal.
One 16 step CV sequencer on the vertical.

The Z8000 can simultaneously modulate up to 10 CV parameters poly-rhythmically, with unprecedented motion complexity. One knob affects all 10 CV outputs! Imagine modifying 10 parameters from one knob. With its 30 gate and clock inputs and 10 CV outputs one can only imagine the possibilities, and all clock inputs can even be driven at audio rates! The Z8000 pairs well with the Trigger Riot and Circadian Rhythms and using it with the QuantiZer extends its capabilities as a high-precision 1V/Oct note sequencer.

Introduced in 2017, a new version of the Z8000 maintains the original circuitry but adds output range adjustment switches on the back and Tiptop's new colored look, which helps highlight the sections, on the front.

Size: 28HP
Depth: 15mm
Power: +12V 70ma / -12V 10ma

Notes: Creative little desktop noise synth based on some unique ideas. Generate tones with conventional oscillator, noise source and oscillating delay feedback, then mix it all through a final delay.

Supplier's Notes:
Synamodecs Levitate is a desktop synthesizer that is made for noise and experimental music making.

It's divided into three blocks Legus, Neura and Nxpctd. Legus consists of two delays in series. Those delays offer time, level, feedback and dry/wet parameters. Due to it's layout it is capable of generating sounds without any input signals. The ouput of the first delay can modulate the delay time of both or just the other one. The Neura section is a sound and noise generator with frequency, texture and waveform controls and outputs on two different independent outputs. Last but not least the NXPCTD block is a third delay through which the Legus ad Neura pass through. It gives control over dry/wet, time and feedback control.

Additionally the Levitate offers an external audio input for extra fun.

All in all a fun little box for weird and crazy sound exploration. Dc power adapter included.

Dimensions: 20 × 30 × 10 cm

Notes: You've heard of parametric EQ, now meet the paranormal filter. Filter on steroids with experimental six-band EQ, delay and loads of LFO modulation. A powerful, creative take on a filter box.

Supplier's Notes:
Dementor Paranormal Filter is a powerful analogue filter with infinitive of option to modulate the sound, it's perfect to create field soundlandscape and introduce in the dark side of the sound with noise and harmonics feedback sounds.

The Dementor is a unique filter, EQ and delay that takes your signals and makes sure to add spice and character to your sound.

You send one or two signals through the machine by using the two independent signal inputs with level control. The special filter features cutoff and resonance control is LFO controlled - in fact, it's three LFOs for cut-off, resonance and time modulation. You also get an experimental six-band EQ called Nuances (not a usual EQ!) with level control and feedback. The echo/delay, is also LFO controlled.

Dimensions: 20 × 30 × 10 cm

Notes: A new way of doing things

Make recording easy

Eight award winning EVO Preamps alongside our advanced converter technology will make everything you do, sound better. Add to that, intelligent mic preamps that set their own levels with Smartgain, the all new, groundbreaking Motion UI control system, and enough I/O firepower to tackle even the biggest of sessions, EVO 16 is truly a studio powerhouse, designed from the ground up to make recording easy.

The EVO Mic Preamp

Get studio quality recordings - Level up your audio performance with eight sonically stunning EVO Preamps. Backed by 25 years of engineering experience, our analogue mic preamp has been designed to deliver the most accurate, clean, and true to source version of your audio, no matter what you're recording.

An analogue mic pre but better

The EVO Preamp technology not only has all the sonic advantages of an analogue mic preamp, but combines it with digitally controlled precision, giving you the ability to set your gain with pin-point accuracy, right down to the decibel.

Smartgain - A total gain-changer

Make recording drums and larger sessions easy with Smartgain. Automatically set the gain for all 8 channels at once with a simple touch of a button. Powered by our lightning quick Smartgain algorithm, Smartgain uses advanced peak analysis to automatically analyse, adjust and set your gain to the perfect levels - all in less than 20 seconds!

Your own assistant engineer

Record, adjust levels, repeat? Sound familiar? Save time and make recording on your own a breeze with Smartgain. Simply set up your mics, hit Smartgain, start performing and EVO 16 will take care of the rest.

Advanced Converter Technology - Clearer, sharper clarity

Providing a MASSIVE 121dB of dynamic range, EVO 16's high performance converter technology makes sure you hear your audio accurately, helping you make creative decisions confidently, identify issues and improve your recording and mixing game.

Line Outputs - Pick The Best Route

Connect and listen to your mixes through multiple sets of speakers with EVO 16's eight line outputs. Alternatively use the extra line outputs to send audio to external outboard gear, such as compressors or FX units, or to headphone amps for distribution to your artists.

Headphone Outputs- Clarity where you need it most

Drive even the most demanding headphones with EVO 16's two dedicated headphone amps. Easily power headphones up to 600 Ohms all while experiencing detailed monitoring and playback as well as plenty of volume.

Classic tone, modern sound

To build a monster guitar sound you need the right foundation. Our harmonically rich JFET instrument input circuit is designed to replicate the input stage of a classic valve amplifier, providing an ideal sonic foundation before you hit your guitar sims.

Digital I/O - Room For Expansion

Future proof your studio and configure your setup to tackle bigger sessions. Whether you're recording drums or taking on a full band, EVO 16's optical inputs and outputs have got you covered. Supporting both ADAT and SPDIF, add up to 16 channels of mic preamps to your setup, giving you plenty of options for expanding your studio down the line. Pairs great with any external mic preamp.

Specifications

Microphone Preamplifier
Mic Gain Range: 58dB
Line Gain Range: 58dB (-10dB pad)
Phantom Power: 48v +/-4v @ 10mA/Channel
Mic EIN: <-127.5dBu
CMRR: >80dB @ 1kHz
Maximum Input Level: +16dBu
Input Impedance (Mic): >3kO Balanced
Input Impedance (Line): >10kO Balanced
Frequency Response: +/-0.5dB 10Hz to 40kHz
Crosstalk: <-105dBu @ 1kHz <-103 @ 10kHz
THD+N @ 0dBu (1kHz): <0.0015%
SNR: 100dB
XLR: Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)
1/4" Jack: IP (Hot), RING (Cold) & SLEEVE (Shield)

D.I
D.I Gain Range: 58 dB
Maximum Input Level: +10dBu
Input Impedance:500k
Frequency Response: +/-0.5dB 10Hz to 20kHz
THD+N @ 0dBu (1kHz): <0.1%
SNR: 100dB
1/4" Jack: TIP (Hot) & SLEEVE (Shield)

ADC Inputs
Digital Reference Level: 0dBFS = +10.5dBu
Frequency Response: +/-0.5dB 10Hz to Fs/2
Crosstalk: -125dBu @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz): <0.001%
Dynamic Range: 112.5dB A-Weighted

DAC Outputs
Maximum Output Level: 12dBu
Digital Reference Level: 0dBFS = +12dBu
Output Impedance: <50O
Frequency Response: +/-0.5dB 10Hz to Fs/2
Crosstalk: <-110dBu @ 1kHz
THD+N @ -1dBFS (1kHz): <0.001%
Dynamic Range: 121dB A-weighted
1/4" Jack: TIP (Hot), RING (Cold) & SLEEVE (Shield)

Headphone Output
Max Output Level: 11.25dBu
Output Impedance: <50O
Frequency Response: +/-0.5dB 10Hz to Fs/2
Crosstalk: -108dBu @ 1kHz
THD+N @ -1dBFS (1kHz): <0.001%
Dynamic Range: 118dB A-weighted
Max Level Into 30ohms: +8.5 dBu, 0.00094% THD+N, 1.66Vpk Power: 86mW
Max Level Into 60ohms: 10 dBu, 0.00079% THD+N, 2.55Vpk Power: 104mW
Max Level Into 600ohms: 11.2 dBu, 0.00057%THD+N, 3.83Vpk Power: 24mW
1/4" Jack: TIP (Left), RING (Right) & SLEEVE (Shield)

Notes: Ultra-versatile stereo reverb pedal with eight contrasting algorithms for flexibility and character. Expression pedal highly recommended for real-time hands-free modulation.

Supplier's Notes:
Space Reflections

ROOMS is a stereo, multi-function digital reverb capable of searing volume, gated walls of sound, and long, trailing reverberant ambiances with an intuitive array of controls designed with live mood-bending in mind.

ROOMS was designed to the highest standards of flexibility and audio fidelity. A studio-quality mixer section provides independent DRY and FX controls over six meticulously programmed reverb algorithms; ROOM, DIGIT, PEAK, GATE, WAVE, and GONG. Each different verb is capable of a universe of sounds, and ROOMS is here to help you explore them.

ROOMS' creative I/O switching and dual-mono dry signal lines allow for a wealth of possible mono and stereo configurations, making it easy to route signals for parallel processing or stereo amplifier setups.

Controls

FREQ: Controls the frequency parameter of the current mode.

DEPTH: Controls the depth parameter of the current mode.

TIME: Controls the reverb time in all modes.

DRY: Controls the volume of the dry signal, from -inf to 20x gain.

FX: Controls the volume of the reverb signal, from -inf to 20x gain.

ALT: Engages the ALT mode, switching between two sets of controls. When active, FREQ is controlled with the F knob, DEPTH with the D knob, and TIME with the T knob. Additionally, the ALT mode turns on expression control of either FREQ or TIME using the F?T Switch on the side of the pedal. NOTE: Expression control ONLY works in ALT mode and when an expression pedal is plugged in.

Expression Pedal: Almost any expression pedal will work with ROOMS. When not plugged in, the controls work as normal. NOTE: Expression control ONLY controls the F or T knobs when ALT mode is engaged and when an expression pedal is plugged in.

Modes & Parameters

FREQ knob : DEPTH knob

1 - ROOM: Tone of Decay : Pre-Delay
A classic reverb that simulates many different rooms.

2 - DIGIT: Delay Time : Delay Feedback
A filter matrix verb capable of creating otherworldly resonances and fractured repeats.

3 - PEAK: Filter Frequency : Filter Resonance
A super intense bandpass filter combined with an ambient reverb.

4 - GATE: Decay Tone : Gate Response Time
A gated reverb. Short reverb times create a classic gate effect, long reverb times create a controllable freeze effect.

5 - WAVE: Modulation Frequency : Modulation Depth
Creates a pitch vibrato effect. Lowering TIME will blend out the reverb signal, allowing sweeps from chorus/vibrato to long modulated reverbs.

6 - GONG: Modulator Frequency : Blends from Aliasing (left) to Ring Modulation (right)
Ethereal, crushed reverb sounds guaranteed to make you star in the upcoming remake of DUNE and live out your sci-fi fantasies of space travel and galactic domination.

Specifications

Dimensions: 5.95" x 3.86" x 2.96" (including hardware).
Weight: 18 oz.
Power: 80 mA, 9V (runs on a standard 2.1 mm negative center 9V adapter).

Notes: For the truly wild

Psycho multimode filter with an ultra-sleek, laser-etched enclosure. Its medical-grade IC chip creates a hyper-precise filter that sounds like no other. With high pass, bandpass, and low pass modes, as well as two types of screaming resonance, the Evil Filter is ready to saw any sound into pieces - or just be the most insane wah you've ever heard. The Evil Filter's two fuzzes take signals into a much more twisted dimension, creating a blooming compression that's perfect for ripping solos and walls of noise alike. Push it past the limit into octaves up, down, and snarling wavefolding sounds. Using the CV/Expression input, you can also control the filter cutoff frequency with an expression pedal or synthesizer.

Controls

Filter Freq: Cutoff frequency of the filter. Numbers shown are in Hz.
Filter Output: Volume of the filter section of the pedal.
Filter Selector: Selects between the different filter types - Low Pass Symbol Low Pass, Band Pass Symbol Band Pass, and High Pass Symbol High Pass.
Filter Resonance: Sets the resonance of the filter in conjunction with the Resonance Switch. WARNING: Will self oscillate at high levels!
Resonance Switch: Sets the range of the Filter Resonance knob between Normal and High.
Fuzz Output: Volume of the fuzz section of the pedal.
Fuzz Type Switch: Choose between two different fuzzes - Low Gain Fuzz Symbol lower for a cleaner, more driving fuzz, High Gain Fuzz Symbol higher for a blasted out, blooming, insane fuzz.
EXP/CV Input: Plug in CV control (~0-3.0v) or an expression pedal for external control of the Filter Freq knob. The Filter Freq knob sets the range for the EXP/CV input.

Specifications

Dimensions: 7.75" x 4.72" x 2.4" (including hardware).
Weight: 25 oz.
Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery).
Current Draw: 21 mA.

Notes: ALM turn their hand to sequencing with the ASQ-1. Multiple modes allow you to sequence up to two CV/gate channels and four trigger outputs.

Supplier's Notes:
The ASQ-1 is a multi mode Eurorack sequencer. It can simultaneously sequence two CV/GATE and four trigger patterns, as well as perform synchronised quantisation of an external CV signal. Programming of all patterns is performed using familiar classic paradigms - SH101 style step-time note entry and classic drum machine pattern editing - with satisfying mechanical computer style keys.

Pattern position, step info, length and clock division settings are communicated via the keys and LEDs. Through simple key combinations, global and performance oriented features such as mutes, transposition and saving / loading patterns are available.

ASQ-1 is designed to be a simple, immediate sequencer ideally suited to quickly jamming out ideas, having happy accidents and performing live. It is intended to be a fun and hands on alternative to the many increasingly complex hardware sequencers out there.

Features
2x step time style CV/Gate sequencers. Think 'SH101' but more turbo.
4x drum machine style pattern sequencers.
1x Clock synced external hi-res CV quantiser.
Intuitive, immediate and fun performance orientated interface with great ASMR.
Internal or external clocking with optional internal division per pattern.
Independent poly rhythmical sequence lengths.
All patterns saveable and persist with state across power cycles.
USB-C port for easy drag and drop FW updates and backing up sequence data.
Skiff friendly with reverse power protection.
Made in England.

Technical Specifications:

Supply: +12V 50mA / -12V 10mA
Size: 32HP
Depth: 32mm
Outs: 0-5V 16 bit CV outputs, 5V Triggers

ASQ-1 pairs well with Pamela's NEW Workout, Squid Salmple and ALM's drum voice modules.

Notes: The XPO or Stereo Prismatic Oscillator music synthesizer module is a Voltage Controlled Analog Oscillator designed for generating Sine waves, Triangle waves, Sawtooth and Spike waves, Sub-Octaves, Stereo Timbre Modulations (including Pulse Width Modulation and Wavefolding), Oscillator SYNC, Linear FM and more in the analog domain.

The XPO is designed to be the Stereo VCO complement to our Stereo Filter, the QPAS. The two modules share the core idea of complex circuits being controlled in multiple dimensions in the stereo field by a few powerful parameters. The Stereo Prismatic »

Features:

Stereo Analog VCO with eleven simultaneous outputs (five mono outs and three stereo pairs)
Modulate Timbre via Stereo Pulse-Width Modulation, Stereo Vari-Timbre, and Stereo Wavefolding
Sine, Triangle, Sawtooth, Spike, and SUB mono outs
Unique Mono versions of all Stereo Waveforms via Left output normalizations
Modulate Left and Right channels together or separately thanks to normalization and attenuverters
Center parameter adds additional timbre control to both sides of Vari-Timbre and Wavefolded outputs
Linear FM Bus features voltage-control over FM depth and a normalization of SUB to FM input for easy GROWL
Hard SYNC circuit
Two 1v/oct inputs for transposition, melody stacking, or richest FM
Expo FM input with attenuverter
Designed to pair well with QPAS, Mimeophon, and X-PAN

Specifications:

Width: 18hp
Max Depth
(incl. power cable): 45mm
Power:
145mA @ +12V
135mA @ -12V

Notes: Polydactyl Versio is Noise Engineering's take on a multiband dynamics processor. Polydactyl Versio is equally at home on single-instrument timbral processing and on end-of-chain gloss. Taking inspiration from Noise Engineering's Librae Legio, Polydactyl Versio applies a unique and transparent algorithm across three bands for maximal dynamic impact. Add in a multiband saturation knob and noise gate, throw in a limiter, and you have a processor that gives ultimate control of color and dynamics.

Polydactyl Versio is part of the Versio family: this platform module can be transformed into a completely different effect by loading a growing number of alternate firmwares, completely free! Plus, with open-source support and documentation at LibDaisy, you can write your own firmware. Grab a Polydactyl Versio and process your signal into submission or total rebellion with three separate bands, saturation, limiting, and noise gating.

Size and power:
10 HP
+12v: 125ma
-12v: 10ma
+5v: 0ma

Notes: Explore unique sonic possibilities with this semi-modular digital synth, combining physical modelling with spectral sound sources, versatile effects and complex modulators.

Supplier's Notes:
An affordable hybrid monophonic synthesizer that allows you to create new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

Anyma Phi blends the classic ingredients of electronic music with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Anyma Phi is compact enough to stand on your keyboard, or anywhere on your desk, and is compatible with any MIDI controller, such as keyboards, sequencers, or even wind controllers, including Aodyo's own Sylphyo.

Whether you play live or record in the studio, design sounds or play presets, Anyma Phi will become an indispensable tool. It can even be used as a stand-alone effects processor, or as part of a guitar effects pedal setup.

The heart of the Anyma Phi is the matrix, which provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation:

With its matrix, Anyma Phi offers a straightforward way to tweak, explore, and create sound universes. It also provides easy ways to make your sound react to your MIDI controllers with mapping shortcuts. But don't be fooled by the simplicity!

If you want to dive deeper, you can take control of the powerful semi-modular synth engine beyond the matrix, with oscillators covering a wide range of synthesis techniques, effects, and modulators.

By connecting those together, you can create any kind of sound, and control it any way you want.

Anyma Phi offers you:
Up to 3 oscillators (sound sources)- physical models, classic spectral, noise souces, external input
Up to 5 effects: resonators, filers - EQ, pitch shifter, ring mod, delay - reverb, chorus - phaser, drive - folder
Up to 8 modulators: envelopes, LFOs, curves, slew limiter, math & logic

This amounts to 69 different module types available, including 30 sources, 22 effects, and 17 modulators.

Technical specifications:
Hybrid monophonic synthesizer
Stereo audio output:
Two 1/4" mono line jack outputs
One 1/4" stereo headphone jack output
1/4" stereo jack audio input (internal piezoelectric mic when external input unplugged)
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine :
Memory: 200 patches
3 oscillator slot
5 effect slots along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots, including envelope generators, LFO, curves, interpolators, slew limiters, etc.
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with a sidechain input
Responsive to pitch, pitch-bend, velocity, breath control / expression, as well as 4 other controller inputs

Additional features:
Percussive playing surface
Patch librarian / editor
Extended memory

The percussive playing surface will allow you to tap and scratch your sounds directly on the case, making your performance even more expressive and fun! This would be made possible by integrating a piezoelectric contact microphone into the case. The resulting sound would be available to use on the Anyma as an audio input, ready to be fed into resonators and effects!

You can edit patches directly on your Anyma, as well as send and receive patches via MIDI SysEx. But what about something more comfortable and powerful?

This software will allow you to easily manage and share patches, as well as edit them in depth in a streamlined environment on your PC or Mac, by making all the synth components directly visible and showing their interactions.

With more memory, you can have a huge library of sounds at your fingertips, or you can make many variations of your patches without having to worry about space or having the computer editor around to make backups!

Let's free the Anyma Phi from the shackles of the Western 12-tone equal temperament! A440 be gone!

Notes: Jürgen Haible's legendary redesign of the Tau "The Pipe" Phaser has now (and for the first time ever) been adapted to Eurorack format. The 2021 version is a new, skiff-friedly design. It includes some additions and modifications compared to the original Haible version like Extended CV control: -1V/Oct and an attenuverting CV input.

Some details of the Haible TAU Pipe phaser module:

Faithful adaption of Jürgen Haible's design
Uses crazy caps for sonic performance.
Eurorack (3U) format, 18 hp
Skiff-friendly: < 30mm deep
Power: appr. 45mA @ +12V and 40mA @ -12V

Notes: Dark Light is a dual reverb featuring both Dark Star and Sunlight. With all the routing options you could want, including separate stereo, parallel mono, and series mono, Dark Light takes Dark Star’s dark pitch shifted, delayed, and bit crushed reverb voices and Sunlight’s bright modulated, comb filtered, and bandpassed reverb voices and combines them into one massive sound to take your time and drift away in. Each pedal maintains its core sound and control set, then expands from there.

Additional Controls

Wet and Dry volumes for each side (replacing the previous Mix control)

Spread to set the stereo spread, allowing Dark Star and Sunlight to blend into each other’s outputs

Hold switch to create indefinite reverb trails while the pedal is engaged

Hold toggle to choose between holding Dark Star, Sunlight, or both

Exp jack to control any combination of Ctrl 1, Ctrl 2, Decay, Decay, Rate, Depth, or Input with an external expression controller

Independent In and Out routing for each pedal, with automatic parallel mono when plugging into only one

Soft-touch Bypass footswitches for true bypass and minimal switch noise

Requires 9V DC center negative 2.1mm jack power supply capable of 150mA (not included).

The art of Dark Light is by Jon Carling.

Notes: The Mutant Hot Glue is a versatile bus mixer for analogue effects chain design. The included analogue compressor offers series or parallel compression and a sidechain input, making it particularly well suited to drum processing. The voltage controlled distortion is based on ideas borrowed from the guitar pedals responsible for a lot of yesterday's acid style techno sounds, but improved over the guitar equivalents, and made specifically for synthesizer and drum processing. The distortion can be used in its default position, normalized to the effects send, or like every other part of the module, broken out and used elsewhere in your modular system.

Features

4 Channel Mixer with Effects Send

4 input channels, each with their own level and effects send control
Channel A mixer bypass switch and dedicated output for easy sidechain compression
Channel B is dual input, but shares level/send controls (for dual output modules, like the Mutant Hihats)
Channel C+D summed output
Main mixer output normalized to compressor input

Hi-Fidelity Analogue Compressor

Soft-knee compressor based on the same family of premium audio ICs used in some 500 Series studio gear
Dedicated threshold and compression ratio controls
Gain control dials in up to +40dB of compressor make-up gain
Compressor sidechain input for creating pumping effects
LED indicator actively displays the amount of compressor gain reduction

Voltage Controlled Analogue Distortion

A classic distortion topology reborn for modular analogue synthesizers and drum processing
In/Outputs are conveniently normalized to the module's send and return jacks
Blend control lets you adjust the mix of distorted and clean input signal
Fast responding CV input allows for complex modulation patterns and even modulating with audio signals

By default, the 4 channel mixer's output conveniently feeds into the compressor's input, giving access to easy New York style parallel compression by way of the compressor blend control. The dedicated output and mixer bypass switch for channel A allow you to use it as a sidechain source for the compressor. An effects send and return allow you to create complex effects routings within your modular system. With the number of excellent DSP and other effects modules on the market today, this makes it easy to combine modules to great effect, all within the eurorack modular domain.

Redesigned by Erica Synths in close collaboration with Hexinverter. Minor alterations were made in mechanical assembly and digital controls to address Erica synths manufacturing routines and chip shortages, but the analogue signal path is 100% identical to the original version.

In September 2022 Stacy Gaudreau - the founder of Hexinverter Electronique, announced closing down the operations. Following their announcement, Erica Synths in cooperation with Hexinverter Electronique saw a way for their incredible and truly unique music instruments to keep on inspiring musicians and finding a home in countless studios to come.
The effort and innovation incorporated in Hexinverter Electronique eurorack modules are far too great to prematurely become history. Erica Synths will take over the manufacturing, sales, and support of several Hexinverter Electronique modules. While retaining all functionality of Hexinverter Electronique modules, Erica Synths redesigned the hardware of modules and will provide support for reissue modules only.

Technical specifications

Width: 24HP | Depth: 30mm
Current draw: +70mA, -70mA @ 12V

Notes: Beautiful combo of vintage tech and modern features from Benidub's boutique analogue phaser unit. Six-stage stereo processing with real-time switching to 12-stage mono mode. Excellent playability with large controls.

Supplier's Notes:
Old school mojo with a modern twist on versatility and sound quality
PHASE is an analogue optical phaser, featuring 12-stage in mono and 6-stage when used in stereo. You can switch between the two modes with the "Mode Select" control any time. We made it completely clickless, allowing you to flawlessly switch mode during your set! This unique control provides even more playability and a wide range of phaser tones.

100% analogue audio path for subtle-to-extreme true phasing colours and tones

Unlike many other phasers in the market, designed after guitar-frequencies needs, Benidub's PHASE has been built with a "studio" oriented design in mind, making it the best phaser for either producers and musician. From studio-standard headroom to balanced connections, everything is designed to improve sound quality while granting a smooth and precise excursion along a wide frequency spectrum.

Features

100% Analogue
As any other BENIDUB device, Phase is precisely built with high quality components for a complex and organic sound. The optical-based design not only ensures the best signal/noise ratio for a phaser circuit but also provides the iconic old-school timbre we all love.

Versatile Routing
PHASE can be used as a 12-stage mono or a 6-stage stereo phaser. We designed it as a playable feature, allowing you to switch between the two modes with the Mode Select, clickless control. Not just a "setting", but a tool to build new phasing effect possibilities.

Performance Oriented Design In A Sturdy Case
While designing PHASE we kept our easy-to-use, performance oriented philosophy. PHASE comes in a tank-built enclosures with every control you'll ever need on board, making it an extremely playful stompbox.

Specifications
1. Input L:

1/4" Balanced or Unbalanced jack. The "main" mono input of the unit.

2. Bypass:

Turns off the out of phase signal, thereby stopping the phaser effect.

3.LFO Depth:

Sets the amount of modulation.

4.Input:

In INSERT mode, you got the usual 50/50 dry signal. In AUX mode, you got the full wet signal.

5. Mode Select:

On MONO you get 12 stages. On STEREO you get 6-stages per channel. The stereo mode can be used with a mono input to generate a mono-to-stereo output.


6. Power Input:

12VDC, 500mA, center positive, 2.1mm*5.5mm barrel connector.

7.LFO Mode:

In LINEAR mode, all the 12 (6+6) stages will receive the same modulation. In MIRRORED mode, the first batch of stages modulation will be inverted.

8. LFO Rate:

Sets the modulation speed.

9. Centre frequency:

Sets the frequency that the phaser will revolve around. The Centre Frequency determines where the middle of the comb-filter will be on the spectrum.

10. Feedback:

The feedback knob controls the amount of phase-shifted signal that gets fed back to the phase-shifting circuit.

Notes: The Analogue-only variant can ONLY be used via CV/Gate like the original CMU-810. MIDI is NOT available on this device.

Fully assembled and Calibrated.

The MSW-810 is a faithful recreation of the CMU-810 Monosynth which was designed as a synth expander for the 1983 CMU-800 computer music production system. At its core however, is the tone generator of the MC-202.

Specifications:

VCO

AS3340 Based
Range: 16'/8'/4'/2'
Pulse Width Modulation: 50% to Min
PWM Mode: ENV/Manual/LFO
Modulation Depth
Tune

Sound Mixer

Level Control Sliders: Square, Saw, Sub-OSC, Noise
Sub-OSC Waveforms: 1 oct down, 2 oct down, 2 oct down PWM

VCF

AS3109 Based
Cutoff Frequency: 10Hz to 20kHz
Resonance: 0- Self Oscillation
ENV Depth
Modulation Depth
CV Follow: 0-100%

VCA

Gate or Envelope

Envelope

Attack time: 1.5 ms to 2 s
Decay time: 2 ms to 10 s
Sustain Level: 0-100%
Release Time: 2 ms to 10 s

LFO

Rate: 0.1Hz to 20 kHz
Delay Time: 20 ms to 0.7s
Rate Indicator

VCA + Mixer

Level Control Sliders: Synthesizer, Input 1, Input 2, Output
VCA Bypass Switch
VCA Response: Lin/Exp

Jacks
Synth CV in: 1V/Oct, 0-7V, 3.5mm TS
Synth Gate in: 0-12V, On>2.5V, 3.5mm TS
VCA CV In: Lin 0.83 to 5V, Exp 0.83-4.58V, 3.5mm TS
Input 1: Unbalanced 1/4" TS
Input 2: Unbalanced 1/4" TS
Synth Out: Max -6 dBm, Unbalanced 1/4" TS
Mix Out: Max -10 dBm, Unbalanced 1/4" TS
Headphone Out: Stereo, 9-150 ohm, 3.5mm TRS
Accent In: 0-5V, 3.5mm TS

Power
9V DC, 500 mA, Tip positive. 120-240V Included

Dimensions
13"x2.5"x8"

Includes: Universal power supply, MSW-810 Synthesizer

Notes: Delay and granular sampling combine to create unique ambience effects, creative reverbs and glitchy chaos. Hugely versatile pedal with five contrasting programs.

Supplier's Notes:
In the high woodlands of the north, undiscovered by most inhabitants, there ruled a clan of old, mystic Treefolk. On the first new moon of spring, these Treefolk could be heard grafting limbs to grow their young - splicing bits of branches from each generation to produce the next line of Treefolk. These new beings keep the lifeblood of all who came before in their new skin. These sounds are in part very old, but in part very new. They are referred to as... Fable.

Let your storybook adventure grows with the Fable Granular Soundscape Generator. The Fable gives you five all-new programs centered around sample and chop delay algorithms to create bizarrely beautiful networks of sampled and resampled sounds. The Fable uses a powerful dual DSP architecture to combine delay programs in series with granular sampling algorithms, each with its own analogue feedback path. Find unique soundscapes ranging from smooth, flowing ambience; to bizarre, organic reverberance; to chaotic, glitchy swarms.

So, what exactly is this granular effect and why is it a magical experience when combined with delay? Granular is a digital processing technique of micro-sampling, wherein short samples called grains are read from a delay buffer. In the Fable, players can adjust these grains by manipulating their sampling length, position, and buffer size from which they're read. They can be played at double or half speed for pitch shift and time stretching effects, play them in reverse, read from multiple positions, and more, in order to achieve different effects.

It's a powerful but complex technique and Walrus Audio created five streamlined programs in the Fable that explore different aspects of its sonic range.

Programs

I. Reverse Delay into Reverse Granular

Program 1 runs a reverse delay into a reverse granular algorithm, in which sampled grains are played backwards. Reversal and re-reversal build up in the feedback paths, creating a complex and organically shifting soundscape. Turn grain size down for long, smooth reversed transients, and grain size up for stuttering reverse glitch madness.

II. Forward Delay into Octave Up Granular

Program 2 runs a forward delay into an octave-up granular program, in which sampled grains are played at double speed. Swarms of double-speed grains build up in the feedback path for bright and airy cascades of sound.

III. Analogue Delay into Octave Down Granular

Program 3 runs a warm, dark analogue-style delay into an octave-down granular program, in which sampled grains are played back at half speed. Slowed down repeats combine with analogue-style processing to create deep, thunderous footfalls and thick, murky ambience.

IV. Multi-Tap Granular into Multi-Tap Granular (Grain-Verb)

Program 4 runs two multi-tap granular algorithms in series, in which multiple samples are played back from each granular buffer simultaneously. Multiple points of sampled sound build upon each other in the feedback paths to create glitchy clouds and unique organic reverberance. Time in this program controls time-stretching of both granular algorithms, changing both the length and tonal character of the granular effect.

V. Forward Delay into Randomized Pitch Granular

Program 5 runs a forward delay into a randomized pitch granular program, in which each grain is played back at a randomly selected speed and direction, varying between pitched up double speed, pitched down half speed, normal speed, plus forward and reversed playback from grain to grain. Pitch changes with each new grain, so play with the X knob in this program to control the rate of randomized pitch modulation.

Review: Recorded over three nights at the iconic Red Rocks Amphitheatre in Morrison, Colorado, endlessly prolific Aussie psych-rock auteurs King Gizzard & The Lizard Wizard invite you to experience their intense live shows in the closest manner to being there in person and the only way they know how (with an absurdly massive 12xLP self-proclaimed bootleg collection). Taken from performances on Oct 10th, Oct 11th and Nov 2nd of last year, these 80+ cuts run the gamut through the collective's heaviest, softest, most direct and ludicrously impenetrable sonic meanderings, whilst wrapped in individual sleeves with an accompanying photo journal of their great takeover of the Colorado plains.

Notes: The Seabee is a multi-chorus pedal that delivers the finest analogue bucket brigade chorus tones, but like any Beetronics, it goes a few steps further. By digitally controlling the chorus delay time, the Bees have created Harmochorus - a never-before-heard pitch shifting modulation that can certainly inspire new genres.

Three Chorus modes provide the classic, lush chorus and vibe sounds we all love, with each mode offering the ability to control the effect in different ways. Vary between two different speeds and/or depths, go from zero to full depth intensity, or even increase the chorus delay time for a whole new spectrum of sounds.

Three Harmochorus modes give you a unique and inspiring new approach to the effect. The easiest way to explain it's that, when clean, it sounds like angel bees are accompanying you, and when paired with some buzz, it sounds like a swarm of killer bees producing the most dangerous pitch shifting modulation are after you! You can choose between two different pitches and speeds, a combination of twelve chords and twelve different arpeggio patterns, or simply choose between thousands of random patterns.

No matter which mode you choose, the Seabee will navigate you to inspiring and creative places.

Its simple layout with only three knobs hides a multitude of possibilities with alternate controls, three ramp shapes, tap tempo, a 4-way tone filter, feedback control, and a rate that ranges from very slow to ultra-fast waves, even reaching ring modulator ranges.

There are two stereo output options, 16 onboard presets, full MIDI control, expression in, external tap and 4 input level options so you can process guitar, bass, all kinds of active pickups or synthesizers and still keep the bucket brigade in its sweetest spot?

It's hard to believe that an analogue chorus can be so complete, versatile, unique and intense - all at the same time. But get ready, because Tone Fishing is about to beecome a thing.

Analogue sound path with the finest bucket brigade chorus tones.
3 Chorus modes / 3 Harmochorus modes
Never before heard pitch shifting chorus with arpeggios and random patterns.
Truly expressive ramping gives you musical control.
16 Onboard presets, Tap Tempo, MIDI, Expression and more.
Selectable input level (supports guitar, bass, active pickups, synthesizers and more)
Hand-assembled in Los Angeles, CA.

Packaging Dimensions: 15.2 x 13.7 x 7.6 cm
Weight: 0.49 kg

Notes: The updated Chronoblob offers versatile, creatively interesting delay. Four modes offer a choice of stereo settings or mono with patchable feedback send and return. Tape-style modulation allows for fun pitch bend effects.

Supplier's Notes:
Chronoblob2 is a digital delay module!

Just like his little brother, Chronoblob2 can sync to a clock signal. Patch one into the SYNC input and choose a multiplier or divider for rhythmic delays. Or leave SYNC unpatched for access to continuously variable delay times!

Chronoblob2 offers four different delay modes! Dual delay mode provides two separate delays with shared controls. Ping-pong mode extends this intermingling even further by placing each delay in the feedback loop of the other.

Single delay is the classic Chronoblob mode with feedback SEND and RETURN. Patch in a lowpass filter for smooth, shadowy echoes, or get weird with a wavefolder or any other effect! Cascade delay mode expands on this archetype by also placing the second delay inside the feedback loop of the main delay, creating a wild multiplying echo effect.

Chronoblob2 provides control voltage inputs for TIME, FEEDBACK, and DRY/WET, and bipolar attenuators for each so you can dial in just the right amount of control.

In Dual and Ping-pong delay modes, although both delay times are controlled by the main TIME knob, you can voltage-control each independently with the two TIME CV inputs. The right TIME CV is normalled to the left one so you can easily control both with the same signal. Additionally, the left TIME CV is normalled to five volts, allowing you to use the attenuators as offsets from the position of the main TIME knob.

Also in these 'pink' modes, the right audio input is normalled to the left input, and the right audio output is normally mixed into the left output (patching into the right jack breaks this connection).

Like the original Chronoblob, you can select the style of time modulation with the slide switch. Choose tape mode for sweeping pitchbend effects or fade mode for smoother, cleaner changes.

Chronoblob2 offers an INFINITE LOOP button and gate input to shut off the delay inputs and lock the feedback at 100%.

Specifications:
Audio: 16bit, 48kHz
Delay: 5ms to 2.73s
Power: +12V: 80mA, -12V: 15mA
Width: 12HP
Depth: 30mm (including power connector)

Includes power cable and Befaco Knurlies M3 mounting screws.

Notes: Delay. Fold. Pitch shift. Doom. Repeat repeat.

Yester Versio is the long-awaited answer to the request for a simple delay on the Versio platform. Yester Versio is a three-tap delay designed to be straightforward and easy to control. It's perfect to help glue together almost any patch, with just enough character to stand out if that's what you want.

Yester Versio comes with controls over panning, delay feedback, and delay time, but Noise Engineering didn't stop there. The Time control interacts with the Even/Triplet/Dotted switch, allowing for flexible delay syncing. These also work with the Tap button and jack input, making it easy to sync Yester to the rest of your patch and create interesting rhythms.

Use the DJ-style filter to shape your delays. Add flavor with Chorus, a bipolar control that adds a bit of clean pitch shifting or LFO-modulated effects. Turn up Fold for some gentle saturation, then gritty wavefolding, and at the top of the knob, to add in chaotic suboctaves for a bit of doom.
And of course, because it is a Versio, almost everything can be CV controlled.

Yester Versio is the delay you will keep coming back to...back to...back to...

YV is part of our Versio stereo DSP platform. A simple USB connection will allow you to update to a variety of effects firmwares. Open-source support is available through libDaisy, which allows you to write your own firmware!

Notes: VastWave is a complex analogue Oscillator with advanced waveshaping capabilities that invites new textural and harmonic exploration beyond subtractive synthesis principles.

Crossfading between harmonically rich folded waveforms and waveforms with Odd/Even harmonics, the VastWave waveshaper expands on the Principal Oscillator heritage, bringing an additional set of waveforms with Odd and Even harmonics and a pulse waveform derived from the Waveshaper's Final output stage.

Furthermore the linear FM input has a dedicated VCA for external FM amplitude modulation and an on board linear Glide delivers a more musical approach to this classic feature.

Features:

Voltage controlled complex waveshaping.
Triangle core.
FM input with voltage controlled amplitude for FM amplitude modulation.
On board linear Glide.
Voltage controlled Pulse-width modulation for Pulse and Final Pls waveforms.
Modern temperature and tuning stability.
High Frequency (VCO) or Low Frequency (LFO) operation.
External Timbre input with sine wave normalization if no external source is patched.
Attenuator/inverter knobs on all voltage controlled inputs.
Inverted or double Sawthooth waveform (selectable by jumper).


Specs:

Width: 16HP
Depth: 33mm
Power consumption: ###mA +12 / ###mA -12
Eurorack Format
Doepfer power connection

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Killer value from DJ brand Reloop. Classic SL1200-inspired design with solid build quality, accurate sound reproduction plus modern features like a 50% pitch option and reverse button.

Supplier's notes:
With the RP-7000 MK2, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.

Sturdy Casing Construction:

By using a combination of metal, rubber and synthetic materials, the RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metallic finish.

Balanced S-Shaped Tone Arm with Upgraded Tone Arm Base:

The RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

Dual Start/Stop Buttons, Precise Motor Control and Reverse Function:

As well as the above technical innovations, the RP-7000 MK2 is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.

High-Resolution Pitch Section with Digital Fader:

Using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

High-Quality Connections and Integrated Phono Pre-Amp:

Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

Powerful Motor with Extensive Adjustment Possibilities:

The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 - 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.

Notes: Hugely powerful multi-engine synth module, offering up to eight voices and eight oscillators, sample playback, custom wavetables and much more. Ultra versatile.

Supplier's Notes:
8 full voice polyphonic, multipart, multi engine synthesizer module with sample playback, sweet reverb and chorus.

Create pads, basslines, riffs and drums. All in one module.

Group voices into parts and assign each voice a different engine or parameter settings to create complex patches.

Features:

Big Sound

Lots of computing power to deliver rich sounding engines, in an 8 voice package.
One voice can have 8 oscillators depending on the engine, which means up to 64 oscillators at the same time!

Polyphonic

Coral features 8 full voices with independent filter, amplifier and modulation envelopes per voice.
Individual FX sends and individual parameter can be set per voice!

Multiengine

Different sound engines can be assigned to each voice from the 10 available.
New engines will be available through firmware updates.

Multipart

The 8 voices can be freely split into different parts. Every single parameter (filter, envelope settings, engine, FX sends, pan, etc.) can be independently set for each part or voice to create complex patches out of the box.

Sample playback

CORAL supports almost any kind of wav file: 16, 24 and 32 bit mono and stereo files, no limit to playback time!
Add overdrive to your samples, sculpt them using the filter and envelopes, pitch them up and down in tune and even modulate the sample file or folder in real time using the CV inputs or CC MIDI commands!

Custom wavetables

You can load any wavetable .wav file to the SD card for the Wavetable engine. The wavetable can be morphed in 3 dimensions. Use our OXI Wave APP to create and edit 3D wavetables.

MIDI Integration

Control any part's parameter via MIDI CC, from FXs sends to sample selection.
Combine it with CV signals for a killer compact combo.

Effects

Space engine to create deep atmospheres and rich ensemble chorus.
Every effect send can be set per voice

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Orobas is a dual tube amplifier that is composed of two identical units.

Each channel has two audio inputs with dedicated gain controls and one output volume control.
Thanks to clever routing, a wide variety of sounds can be created. The two channels can be connected in parallel or in series (Parallel / Series). In series connection, the output of channel 1 is still active, good for parallel signals (note: each channel output is phase-inverted in relation to the opposite input). This way, feedback can be generated by feeding back the signal from output 1 to e.g. a control voltage input.

The screen control voltage input determines the gain and the sound characteristics. Additionally, the input is normalized to INPUT 1 of the respective channel.

The Suppress control voltage input is normalized to the input signal if nothing is connected. The purpose of this input is to direct electrons reflected from the anode back to the anode. Turning the knob to the positive does not change as much, turning it to the negative slightly attenuates overtones. With a positive control voltage the change is minimal, but with a negative control voltage you can realize e.g. ducking effects and effectively switch off the tube. Audio Rate Modulation is also possible here and a bit milder than with the Screen CV, but still effective.

The evocation potentiometer controls the feedback of the second output into the first channel. The sonic performance is very much dependent on the Plate Bias switch. The Plate Bias switch effectively controls the headroom. This allows you to use the tubes in three different settings, from fuzz sound to full distortion.

*This version is equipped with other tubes than in version 1.

Tube length: 55mm

Depth: 45mm

Notes: One of the most unusual synths around, based on a rotating optical disc which functions as a sequencer. Program the built-in pulsewave synth engine or control other synths using the optional Wave Expander.

Supplier's Notes:
Taking its cosmic inspiration from star charts and ancient astrolabes, Star Song is a rotating optical disc-programmed sequencer with a built-in minimalist synthesizer.

Star Song can be used either to play its own built-in pulsewave synthesizer, or in combination with the A.M.P. electronics Wave Expander (sold separately) to drive external analogue and modular synthesizers.

How it is used

To create sequences on Star Song, the seven translucent rings (orbits) of the optical disc are marked with a marker (included) or opaque tape. The disc is removable and additional discs are sold separately, allowing for indefinite storage of your favourite sequences.

The outer six rings control the tuned note selection and note-on/off sequencing. The innermost ring controls the cut-off frequency for the built-in bandpass filter.

Disc on/off and disc direction are toggled from touch contacts on the front panel, and disc speed is controlled from the central rotary control.

Additionally, there are 1/8" inputs to control rotation speed and rotation direction with an external source.

The addition of Wave Expander makes the Star Song into an incredibly versatile Gate(6 channels) and CV (1 channel) sequencer, as well as providing the Star Song's tuned audio oscillator over five separate octave divisions (four audio and one sub-audio), 12 outputs in all to integrate into your modular system.

Multiple Star Song units can be synced by using an external clock signal, and you can even slave Star Song to your existing Melody Oracle/Wave Expander combo.

Sing the cycles of the spheres, with Star Song, a "revolutionary" new sequencer.

Tech Specs:

Disc Rotation: 0~15RPM
Panel Controls: Disc rotation on/off, disc rotation rate, disc rotation reverse.
Synthesizer: Quasi-monophonic pulsewave, 8 tuned notes, each with three octaves used in any combination. Sequenced via optical disc.
Tone Filter: Bandpass, optically-controlled.
Audio Output: 1/4" LINE (5V p-p)
AMP LINK Output: CAT 5 or 6 w/SHIELDED connector (compatible with Wave Expander and future AMP accessories only).
Motor Clock Input: 1/8" 0-12V. ON @>7.5V
Disc Direction Input: 1/8" 0-12V. CCW @>7.5V
DC input: 15VDC, 2.1mm, tip positive (US adapter included)

Notes: Up to eight voices of digitally synthesised drums, percussion and synth sounds from this versatile module, featuring virtual analogue models as well as FM and wavetable options.

Supplier's Notes:
Flame "Fire" percussion synth module

The module is a full 8-way polyphonic drum and percussion synthesizer. It offers different digital synthesis algorithms, which can be distributed over 8 channels. The sound engine delivers virtual analog sounds as well as different digital percussion sounds, which are generated with FM, wavetable or virtual analog synthesis. It is also possible to create sim- ple monophonic bass or synthesizer voices.

During development, particular attention was paid to direct and simple usability with regard to live operation. The hardware essentially consists of two parts (which are deli- vered together). On the one hand there is the basic module with all controls, the display, connections for MIDI, 2x CV inputs and 5 audio outputs.

There is also a separate XFIRE I/O extension with sockets for the 16 analog trigger/gate/CV inputs and 3 additional audio outputs. Both modules are connected via a 60cm long ribbon cable. In this way, the XFIRE module can be installed anywhere else in the rack. The base module is therefore only 22TE wide and can also work alone without the extension as a MIDI expander.

A maximum of 8 audio outputs are available. A stereo pair (outputs 7+8), plus 6 additio- nal individual direct outputs. All outputs are freely configurable. Two pages with settings for panorama and volume are available for the stereo main out.

There is a gate/trigger input and a configurable CV input for each channel. Two additio- nal programmable CV inputs can be used for further controls. Regardless of the analog connection, the module offers full MIDI functionality. Two MIDI inputs and a MIDI output/softthru allow integration into an external MIDI setup. The firmware can be upda- ted via MIDI Sysex. The created KIT data can also be saved or exchanged.

Notes: *** This version of UTILITIES comes with PULSAR-23 style turrets designed for connecting alligator clips. ***

UTILITIES contains a set of simple auxiliary modules to expand the functionality of the PULSAR-23 drum machine. UTILITIES modules can also be used with any gear that works with CV signals (Eurorack, semi-modular synthesizers, etc.).

The modules included in UTILITIES can be divided into two groups:
1) Passive elements such as switches, resistors, capacitors.
2) Various types of amplifiers and waveshapers, linear, non-linear, controlled and uncontrolled.
Passive elements are designed to expand the possibilities of switching and controlling the PULSAR.

Linear amplifiers are needed when you need to feed a signal from a device operating in a lower voltage format to the PULSAR inputs. For example, it can be a step sequencer with an output voltage of 5 volts, while the PULSAR needs 10 volts to fully trigger the drum modules. Or it could be the output of a cassette tape recorder, which has an output of 1 volt, while for normal operation the PULSAR needs an input level of an audio signal of 5 volts. Non-linear and controlled amplifiers and waveshapers are designed to control the signal level, while simultaneously changing its spectrum, distorting its shape and adding harmonics. The circuitry of these amplifiers is very simple and based on the early developments of the transistor era, with its inherent beauty and grace.

UTILITIES connectors are made in the PULSAR-23 format on pins designed to connect the alligator clips. There are also adapters for 3.5mm Eurorack mini-jacks.

The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

There are also adapters for 3.5mm Eurorack mini-jacks. The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

The top panel and enclosure of UTILITIES are made of PCBs, which significantly reduced the cost of the device.

Power supply: DC +12 v 5.5 x 2.1 mm center plus
Current consumption: 50 ma max
Dimensions: 288 x 193 x 40 mm
Weight: 0.75 kg

Notes: The new MULTI-FORMAT CASE PLAYER/MIXER (V10/A9) SET is specifically designed for transporting two CDJ/Multimedia Players and a 6 or 4-channel club mixer, such as the Pioneer DJM-V10, DJM-A9, or Ecler Warm 4. The case is universally compatible with all current models from Pioneer DJ, Denon, Allen & Heath, Ecler, Rane and Reloop, and can be adjusted to different device sizes using the included foam strips. Crafted from 9 mm vinyl laminated plywood, sturdy aluminum profiles, heavy duty butterfly latches and smooth rolling wheels, this case provides ultimate protection for mobile use on the road.

Fits

Pioneer DJM-V10
Pioneer DJM-A9
Pioneer DJM-900 NXS2
Pioneer DJM-900 NXS / SRT
Pioneer DJM-800 / 700 / 600
Pioneer CDJ-3000
Pioneer CDJ-2000 NXS2
Pioneer CDJ-2000 NXS
Pioneer CDJ-900 / 850 / 800
Pioneer XDJ-1000
Allen & Heath PX5
Allen & Heath DB4
Allen & Heath DB2
Allen & Heath Xone 92 / 62 / 43C
Denon LC 6000 Prime
Denon SC-6000 / SC-6000M
Denon SC-5000 / SC-5000M
Denon X1850 / X1800
Denon X1600
Denon SC3900
Denon SC2900
Reloop RMX-90 DVS
Reloop RMX-80 Digital
Ecler Warm 4
Ecler NUO4
Rane MP2015
Rane Sixty-Eight / Sixty-Four

Specs

Outer measures: 125,4 x 59 x 25 cm
Inner measures: 33,1 x 42,5 x 8,4 cm / (CDJ compartment) 43,7 x 45,4 x 8,4 cm (Mixer compartment)
Weight: 21,5 kg

Notes: UDG have further finetuned what was already a great design concept for a flight case into one especially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal "Stage Grip" pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminium profile & massive UDG logo embossed ball corners are incorporated to ensure longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Set Pioneer CDJ-3000/A9 Black Plus (Laptop Shelf + Wheels) also features built-in corner wheels with high quality in-line skate bearings for convenient transport and heavy-duty, spring-loaded handles for a secured lift & load. In addition, there is an extra notebook shelf included for your notebook, mouse and/or any other devices such as effect processor and interfaces.

UDG Ultimate Flight Case Set Pioneer CDJ-3000/A9 Black Plus (Laptop Shelf + Wheels) not only transports your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black coloured combination.

Colour: Black
Weight: 25,00 kg / 55 lbs
Outer Dimensions (W x H x D): 116.7 x 53.8 x 21.9 cm | 45.9 x 21.2 x 8.6 inch
Inner Dimensions (W x H x D): PLAYER COMPARTMENT: 33.2 x 42.4 x 8.7 cm | 13.1 x 16.7 x 3.4 inch
MIXER COMPARTMENT: 40.9 x 42.4 x 8.7 cm | 16.1 x 16.7 x 3.4 inch
Material: Heavy duty construction of 9 mm thick plywood
Protection: Improved powder coated and anodized hardware
High density diamond embossed EVA foam & carpeted protective padding
Dual anchor rivets with included washer
Extra-wide silver solid aluminium profiles
Secure stacking due to stackable ball corner

Extras

Convenient 80 mm space at rear for connections & PSU storage
Cable access hole with removable UDG emblem cover
Removable front access panel
Built-in corner wheels with high quality in-line skate bearings
Adjustable laptop shelf
Fits: 1 x Pioneer DJM-A9 and 2 x CDJ-3000 and CDJ/DJM models or any 12"-mixer/ CD-player models from Allen & Heath, Denon, Rane, Reloop etc. + 1 x Laptop + Accessories

Notes: A clever approach to VCOs here. Three unevenly phased sawtooth signals are blended to create phase cancellations and unorthodox harmonics. Simple but deep.

Supplier's Notes:
Explore the sonic space of phase cancellation! Phase cancellation shapes the characteristics of all acoustic instruments. It forms the basis of chorus and phaser effects. It gives vibrancy to detuned oscillators. The vibrant sound of pulse width modulation or the roaring sound of animated supersaws are a small part of a much larger sonic space that the Triphase Oscillator is built to discover.

The Triphase Oscillator produces three different sawtooth waves at the exact same pitch but with independent phase control. These are blended in a bipolar CP3-type mixer, giving a rich waveform at the output. By blending in a wave with a positive polarity, you reinforce in-phase harmonics; by blending a wave with a negative polarity, you reduce in-phase harmonics. The phase differences between the waves distribute the harmonics from in-phase to out-of-phase. The result is a comb-filter effect, like the effect produced by an acoustic reflection, with notches and peaks spaced evenly throughout the frequency range. Conventional pulse width modulation can be obtained by blending two sawtooth waves with equal but opposite polarity. Supersaw-like behavior can be obtained by using phase CV with the same polarity for all three waves. But many other interesting spaces can be reached. For example, by setting the phases correctly you can cancel out the first harmonic and get a saw an octave higher, or cancel both the first and the second harmonic, giving you a saw an octave and a fifth above the fundamental frequency. Modulation then brings back these canceled harmonics.

The Triphase Oscillator is completely analog, built around a sawtooth core that is functionally stable and accurate but sonically alive. It has linear FM on all three waves, and an excellent hard sync that can create shredding harmonic sweeps. The CP3 type mixer gives good distortion at higher levels, allowing you to blend three 5-volt-peak waves without worrying about headroom. All CV functions at audio rate. With an LFO driving the phases, it can easily replace the classic analog three oscillator setup, and in this configuration it's one of the fattest things you have ever heard. But the Triphase oscillator is much more than a thickener, and can just as easily produce thin reedy sounds or subtly shifting harmonic drones.

Specs

Size - 18HP
Depth - 25mm
Power Consumption
+12V 50mA
-12V 50mA

Tuning Range
1.2Hz-61kHz

Tuning Accuracy
~8 octaves

Output Range (Individual)
-5V-+5V peak

Output Range (Mix)
-8V-+8V peak

Notes: Proper futuristic amp modelling and effects courtesy of Mooer's next-level GE1000, featuring AI-driven auto-EQ and a five-inch touchscreen. Hook up to the GE Cloud app to edit and share sounds.

Supplier's Notes:
MOOER has consistently pleased the guitar pedal market with its GE multi-effect range, and its latest addition, the GE1000, is set to be no exception. The GE1000, built with a futuristic and sleek "Walking Star" design, builds upon past GE products, offering an even larger range of guitar processing effects, preamps, amp simulators, and features than previous entries.

The GE1000 comes preloaded with an impressive bank of guitar effects and amp simulations, but this is augmented further through MNRS GE Cloud support. MOOER's MNRS files consist of IR samples from real amplifiers, facilitating authentic feeling tones that can be downloaded, uploaded, and shared via MOOER's 'GE Cloud' app for free. The GE1000 also supports third-party IR files of up to 2048 sample points, enabling further expansion of the pedal's portfolio of amp simulators.

Further adding to the GE1000's impressive amplification and tone features, the GE1000 includes a cutting-edge AI-driven automatic equalizer, a first for MOOER. This automatically adjusts a 5-band EQ based on the user's playing and music style choice, providing further possibilities for creativity whilst still providing the flexibility of a manual-controlled EQ interface.

MOOER hasn't only focused on tone and pitch with the GE1000 exclusively, which is illustrated perfectly by the integrated Groove Station rhythmic toolkit, consisting of a style-specific drum machine and a looper. These features have been designed to work both independently and in tempo synchronization, making them adaptable for all types of jam. The looper even includes automated record and count-in functions, activating the loop recording when an input signal is detected, providing a unique hands-free looping experience.

MOOER has always excelled at providing innovative UI experiences, and the GE1000 is set to continue this trend. The pedal features a 5-inch high-quality coloured touch screen designed for intuitive multi-effect workflows while keeping some fan favourites from previous GE pedals. These include the signature MOOER multi-purpose control dials, buttons, and a quick-access expression pedal.

Additional flexibility can be found within the pedal's cutting-edge control systems, including programmable MIDI ports, bundled preset management software, and compatibility with the MOOER mobile app.

This level of flexibility is matched by the pedal's audio routing solutions, which feature Bluetooth playback, USB audio interfacing, serial and parallel TRS stereo FX LOOP compatibility, and industry-standard input and output ports.

Notes: Intended for serious personal studios and professional music-production environments, the Erisr Pro Sub 10 helps you take charge of the low-frequency foundation of your mix. An ideal companion to Eris Pro- and Eris Studio-series reference monitors, the Eris Pro Sub 10 complements full-range monitors without overshadowing them and extends the reach of your full-range system's low end with a natural sound.

Powerful and musical, the PreSonusr Eris Pro Sub 10 active, front-firing studio subwoofer is designed to deliver fast and accurate transient response, extending low frequencies down to 20 Hz, allowing you to hear the full-spectrum range of your mix. Driven by 170W (RMS) Class AB amplification, the Eris Pro Sub 10's 10-inch, glass-composite, low-frequency driver delivers tight, responsive sub-bass, thanks to its lightweight and rigid cone. This design provides lower distortion than other materials for sub-bass reproduction that's as coherent and clear as your full-range monitors.

Extensive user controls include input gain, continuously variable lowpass filter for creating a seamless crossover transition, and a switchable highpass filter that removes content below 80 Hz from the full-range signal sent to the monitors. A continuously variable lowpass filter (50 Hz to 130 Hz) allows you to create a seamless crossover transition between the full-range studio monitors and subwoofer for the most accurate listening environment possible.

Features

10-inch, front-firing, glass-composite, low-frequency transducer
Front-firing, bass-reflex acoustic port
Continuously variable lowpass filter (50 Hz to 130 Hz) sets the upper frequency reproduced by the subwoofer
Switchable highpass filter removes frequency content below 80 Hz from the full-range subwoofer outputs to the main monitors
Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
Input gain control (-30 dB to +6 dB, continuously variable), polarity invert switch, and ground-lift switch
170 watt (RMS), Class AB amplification for up to 113 dB SPL, with a frequency response of 20 to 200 Hz
Left and right, balanced XLR and 14-inch TRS and unbalanced RCA main inputs
Left and right balanced XLR and 14-inch TRS outputs and XLR subwoofer output for connecting a second Eris Pro Sub 10

Versatile connectivity

Erisr Pro Sub 10 subwoofers provide the connections needed to act as the central hub for a basic monitoring setup, including left and right balanced XLR and 14-inch TRS and unbalanced RCA main inputs. Connect full-range monitors with left and right balanced XLR or 14-inch TRS outputs. An XLR subwoofer output lets you connect a second Pro Sub 10.

Seamless system integration

The Erisr Pro Sub 10 integrates seamlessly with your full-range monitors. A variable lowpass filter sets the upper (crossover) frequency reproduced by the subwoofer. A switchable highpass filter on the full-range outputs helps avoid frequency cancellation and reinforcement in the subwoofer's upper range, while a polarity-invert function ensures your system is in phase. A momentary footswitch (included) makes it easy to compare your mix with or without sub-bass frequencies.

Electronics
Voltage: 220-240V UK
Wattage: 250W Peak, 170W RMS

Performance
Peak SPL: 113 dB (@ 1 Meter)

Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard
Audio controls: Input Gain Range: -30 to +6 dB Low Pass Filter Control: 50 Hz to 130 Hz
Audio switches: Polarity Switch: 0 degrees or 180 degrees Ground Lift Switch: On/Off High Pass Filter Switch: On/Off Bypass Footswitch: On/Off
Monitor inputs: 2- Balanced XLR, 2- Balanced 1/4" TRS, 2- Unbalanced RCA
Power amplifier type: Class AB

Dimensions: 15.70 x 12.60 x 16.00 in
Weight: 37.00 lbs
Depth: 16" (40.6 cm)
Height: 15.75" (40 cm)
Width: 12.6" (32 cm)

Accessories
1-Button Footswitch Included

Notes: Fuzz meets synth meets reverb in this clever pedal. Built-in drone VCO, noise generator, LFO and effects allow you to warp and twist input signals into completely new tones and textures.

Supplier's Notes:
Grone 2 Dark Drone machine Pedal Version

Blocks description

Drone VCO:

Generates sound based on equations converted to analogue signals, there are sixteen equations selected by algorithm up pot. Four LEDs indicate equation number in binary mode. Three Pots modify numbers used by the equation, A0, A1 and A2, fourth pot Sample Rate controls pitch and speed of the oscillation. There's an expression jack input, EXP2 for controlling sampling rate.

NOISE GENERATOR: White noise with noise level pot.

Voltage Controlled Filter: MS20 resonant low pass filter, with CUT frequency pot control, RESONANCE, MODULATION 1 amount pot, Expression jack input 1 controls filter cuttoff.

LFO1: Low frequency oscillator routed to MOD1 from VCF, RATE and WAVEFORM shape Pots.

Waveforms are: ramp up, ramp down, square, triangle, sine, sweep, random levels, random slopes

FUZZ Section: gain stage that affects input signal, with controls for input gain and level.

Effects Section: Consists of a chorused reverb with delay, adding octave up or down component, with freeze function

Pots controls:
1-Blend controls mix of effects over final output signal
2-Octave blends mix a pitched signal to the input of the reverb
3-Octave -1 +1 controls tuning of pitch component
4-Repeat controls feedback of delay component
5-Balance controls mixture from reverb and delay.
6-Pitch controls the sampling rate of the whole effects section, modifying delay time and reverb decay.

Footswitches:
1- Synth: mutes or enables the drone VCO and noise generator
2-Filter: Bypass for the VCF
3-Fuzz: Bypass for the fuzz that processes the input signal.
4-reverb: Bypass for the reverb/delay section
5-Freeze: toggles freeze function for reverb section

Jacks:
Input, Expression 1 input (VCF) Expression 2 (VCO sample rate), Output

Notes: The Haible VC Resonator is an evolution of Jurgen Haible's Resonator which was inspired by the Polymoog Resonator. As Jurgen stated: The Polymoog, an early polyphonic synthesizer, featured a 3-band "Resonator" section that allows Formant-Filtering in addition to its dynamic Filters. Such a Resonator is a very useful feature for analogue synthesizers. Each of the three (now overlapping) filter bands has a control for frequency, signal gain, and emphasis (resonance). The VC Resonator now not only adds VC control for each band, but also extends the ranges whithin which each frequency band can be set - adjacent bands can now overlap or even cross over, for instance the LOW and MED bands can now be set (or moved!) so that the LOW center frequency is higher than the MED frequency.

Jurgen's original Resonator (like the Polymoog) had a switch to select one of 3 basic modes, i.e. only one mode could be used at a time. The Haible VC Resonator now provids the same 3 modes as separate outputs so they can be used simultanously, e.g. for further processing like crossfading.

Some details of the Haible VC Resonator:

Evolution of Jurgen Haible's design
Added Voltage Control for Filter bands
Extended range of each band (overlapping)
Three separate outputs
Burr-Brown op-amps and high-end VCAs
Eurorack (3U) format, 18 hp
Skiff-friendly: < 30mm deep
Power: appr. 60mA @ +12V and 60mA @ -12V

Notes: ***B-STOCK: Box opened, product in perfect working order***


UDG have further finetuned what was already a great design concept for a flight case into one especially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal "Stage Grip" pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra wide black finished aluminium profile & massive UDG logo embossed ball corners are incorporated to ensure longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Set Pioneer CDJ-3000/A9 Black Plus (Laptop Shelf + Wheels) also features built-in corner wheels with high quality in-line skate bearings for convenient transport and heavy-duty, spring-loaded handles for a secured lift & load. In addition, there is an extra notebook shelf included for your notebook, mouse and/or any other devices such as effect processor and interfaces.

UDG Ultimate Flight Case Set Pioneer CDJ-3000/A9 Black Plus (Laptop Shelf + Wheels) not only transports your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black coloured combination.

Colour: Black
Weight: 25,00 kg / 55 lbs
Outer Dimensions (W x H x D): 116.7 x 53.8 x 21.9 cm | 45.9 x 21.2 x 8.6 inch
Inner Dimensions (W x H x D): PLAYER COMPARTMENT: 33.2 x 42.4 x 8.7 cm | 13.1 x 16.7 x 3.4 inch
MIXER COMPARTMENT: 40.9 x 42.4 x 8.7 cm | 16.1 x 16.7 x 3.4 inch
Material: Heavy duty construction of 9 mm thick plywood
Protection: Improved powder coated and anodized hardware
High density diamond embossed EVA foam & carpeted protective padding
Dual anchor rivets with included washer
Extra-wide silver solid aluminium profiles
Secure stacking due to stackable ball corner

Extras

Convenient 80 mm space at rear for connections & PSU storage
Cable access hole with removable UDG emblem cover
Removable front access panel
Built-in corner wheels with high quality in-line skate bearings
Adjustable laptop shelf
Fits: 1 x Pioneer DJM-A9 and 2 x CDJ-3000 and CDJ/DJM models or any 12"-mixer/ CD-player models from Allen & Heath, Denon, Rane, Reloop etc. + 1 x Laptop + Accessories

Notes: Building on the familiar dual VCO core arrangement of Carrier and Modulator, Mindphaser is a complex oscillator which departs from this bit of ancestral DNA with a modern toolkit focused on searing, phase-modulated leads, percussive basslines and other-worldly effects!

A diverse palette of intermodulation and harmonic experimentation is offered through the Modulation Bus, its unique Waveshaper and the dedicated Thru-zero Phase Modulation Bus. An intuitive interface provides colour-coded visual feedback and responsive indication while performing in dimly-lit environments.

Two precision analogue oscillator cores

Precision, wide-range V/oct ramp cores, each ranging from deep subsonic to supersonic frequencies (ramp cores, and not triangular, deliver the ideal waveforms for analogue phase accumulation in the TZ-PM Bus)
Each core generates fundamental waveshapes which interact and mangle one-another through the complex Modulation Bus and TZ-PM bus
Simultaneous waveform outputs for each base shape
Dedicated button to toggle between RAMP or SAW for each core, inverting the phase of the ramp output
V/oct, linear FM and exponential FM inputs which are all independent of the TZ-PM functionality. The Carrier's FM occurs inside the core itself, separate from the TZ-PM bus.
DC-coupled linear FM

Carrier

The heartbeat of Mindphaser, focused on audio-rate generation. Drives the WAVESHAPER and TZ-PM bus. This core's frequency range spans the audible spectrum.

- An external hard SYNC IN forcibly resets the core, useful for punchy sequences, percussive basslines and drum synthesis -- or to sync to another VCO.

- Coarse and fine controls conveniently span the audible spectrum. Ranges further with external CV.

Modulator

An extremely wide range oscillator, spanning from deep LFO frequencies all the way up to supersonic sound! Four base waveforms and diverse internal routing options form a versatile palette of modulations for the CARRIER to feed on.

- Activating hard SYNC on the Modulator locks its core to the Carrier's heartbeat. The effect can be dramatic. Try this while phase modulating!

- Octave RANGE switch lets you quickly flick up and down between octaves. All the way beyond audio-rate and LFO speed octaves. Perfect for experimenting with different PM sidebands and taming the wide frequency range of the Modulator.

- Manual PW (Pulse Width) control and dedicated CV input for PWM.

Waveshaper

This isn't a classic waveshaper! Developed anew from the ground up, this waveshaper is focused on deep harmonic experimentation and audio obliteration. Each waveshaper parameter is capable of being "turned up to 11".

FOLD up to 5 octaves above the fundamental Carrier frequency. A ceiling forms at maximum, imparting additional harmonics.

FEEDBACK the waveshaped and phase-modulated audio through a signal path internal to the waveshaper.

AMPLITUDE modulation spans thru-zero, allowing for full-range ring modulation effects with bipolar CV or audio signals.

CLIP the final stage of amplitude with the switch to introduce a last stage of harmonics before the complex signal exits through the final OUT.

Switchable inverting attenuators on each CV input, for quickly inverting the behaviour of your modulation. The indicator illuminates red to tell you the attenuator has been inverted.

Two distinct waveshaping modes

A press of the shape switch toggles Mindphaser between RAMPOID (green) and TRIANGULAR (yellow) waveshaping modes.

These modes have a remarkable effect on the behaviour of wavefolding and overall character of the final complex OUT, in addition to TZ-PM Bus character.

RAMPOID mode folds more asymmetrically, with raucous, buzzing harmonic artefacts as you sweep and introduce TZ-PM

TRIANGULAR mode folds more symmetric, splitting the complex sine wave at its peak centre of the waveform. TZ-PM character is less raucous, and more smooth.

TZ-PM Bus

Thru-zero phase modulation in the ANALOGUE realm! Unlike its digital counterpart, analogue TZ-PM has its own character we've come to expect from analogue circuitry!

A dedicated, voltage-controlled phase modulation bus completely separate from the Mod Bus
Modulator's SINE wave normalled to the PM SOURCE input
SOURCE input allows you to modulate phase with any signal you patch in
Dedicated voltage-controlled INDEX (amount)
Manual phase lets you zero in (or not!) on the base phase before introducing modulation
Independent of the Linear FM circuitry in the Carrier core

Mod Bus

The internal modulation powerhouse, normally fed by the Modulator core, but external signals are patchable as well.

Select from the PULSE, RAMP/SAW or SINE output of the MODULATOR, or inject your own SOURCE to the bus.

Voltage-controlled INDEX behaves like a macro control when combined with various amounts and polarities dialled in at each CV destination.

Internal sends include the Carrier's classic Linear FM, Amplitude, Feedback and TZ-PM Index, with variable amounts and polarities!

Modulator waveforms internally feeding the Mod Bus behave unipolarly, for predictable modulation of every Mod Bus destination, without external patching. By patching in one of the Modulator's bipolar waveform outputs manually (or any external signal), you can override this behaviour.

Dimensions
30 HP
24 mm deep

Current Draw
110 mA +12V
100 mA -12V