Back catalogue: Studio Equipment

Notes: The Daisy Patch Submodule is a DSP platform for Eurorack synthesizer modules. It features a lightning fast STM32 processor, high fidelity stereo audio codec, and enough RAM for 10 minute long buffers - all with standard signal levels and conditioning for the Eurorack ecosystem.

Simply design your carrier board, and let the Patch Submodule do the rest!

Programming is a breeze with support for C++, Max/MSP Gen~, Pure Data, Arduino, and more. These languages can be coupled with our open source DSP library, DaisySP, for a powerful music synthesis programming environment.

Create your dream Eurorack module with the Daisy Patch SM!

STM32 processor at 480MHz, 96kHz / 24-bit audio, RAM for up to 10 minute audio buffers

Stereo audio IO, x12 ADC inputs ( 16-bit bipolar CV or potentiometer), x2 CV outputs (12-bit), x2 gate inputs, x2 gate outputs, x12 GPIO

Flash firmware over USB via open source web programmer

Support for SDDMC, SPI, UART, I2C, and USB

FCC / CE Tested and Compliant

Notes: M2.5 screws have gained popularity in the US with manufacturers such as Elite, Make Noise, and anyone using Vector rails.

Notes: M3 is the original mounting screw as specified by Doepfer in the Eurorack specification. M3 screws are used in cases by Doepfer, TipTop, Intellijel and others.

Notes: Desktop enclosure case for the Empress Zoia Euroboro- 12v power supply included. Euroboro not included- picture shown for demonstration purposes only.

Notes: 3U 42 HP aluminium case

Depth: 42 mm

Kit includes:
- 42 hp case, M3 threaded holes
- 4 rubber feet

Notes: The Mini Case offers 40 HP for mounting modules. A power supply is built-in.

208 mm long x 45mm deep.

PLEASE NOTE: Comes with EU 2 pin plug only - UK adapter may be required.

Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.

Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.

Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.

Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.

Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.

Notes: 3,5mm stereo jack male to 2 x 3,5mm mono jack female.

Length: 22cm

Colour: black

Notes: These cables are designed to interconnect pro audio gear with unbalanced mini phone jacks. They are ideal for use with modular synthesizers and sound modules.

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility

Connectors: 3.5 mm TS to Same
Conductor: 26 AWG OFC
Shield: 85% OFC Spiral
Quantity: 8 pc

Notes: These cables are designed to interconnect pro audio gear with balanced phone jacks. They are ideal for use with balanced phone patch bays. Features include:

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility

Connectors: 1/4 in TRS to Same
Conductors: 26 AWG x 2 OFC
Shield: 85% OFC Spiral
Quantity: 8 pc

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: Blank panel for Intellijel 1U spaces. Made from high quality brushed aluminium that matches the 1U modules.

These can also be used for DIY purposes if you drill/mill them to fit your own custom circuits.

Comes with 2 screws.

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: 4U x 104HP Gig Bag (For Palette)

Clearance to leave your system patched and with a Palette 104 Decksaver Lid attached

Padded main compartment protects your case from bumps and scratches

Waterproof zippers

Zipped outer pocket for stuffing accessories and other gear

The rear pocket closes with velcro at the top but unzips at the bottom to become a handle sheath so your case can sit on top of a rolling suitcase.

Super beefy strap connectors with clipped strap

Padded Handle

Lightweight

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: The new, 2nd generation Audio Jacks Board comes pre-installed in every Intellijel 7U case manufactured since early 2019. Because this board is more fully featured than the previous generation, it's available as a stand-alone component for anyone who wishes to update an older 7U case.

You can tell which board you have by looking at the connectors. The new Audio Jacks Board has a large shrouded header flanked by two smaller shrouded headers, flanked by two link connectors at either end. Older boards have only one connector along the bottom edge.

The board holds four Neutrik TRS jacks, each of which can be configured as either an input or an output depending on the modules you connect. This allows you maximum flexibility when configuring your case - whether you wish to use the audio jacks as outputs, inputs, sends & returns; or some combination of these.

The jacks carry different audio signals depending on what you connect to the Audio Jacks Board. Please refer to the manual for more details on the many options available.

Notes: 7U x 104HP Gig Bag

Sized to perfectly fit the 7U x 104HP Performance Cases.

The padded main compartment protects your case from bumps and scratches

Waterproof zippers

Outer pocket for stuffing accessories and other gear (great for adding the Intellijel Pouch filled with cables and hubs)

The rear pocket closes with velcro at top but unzips at the bottom to become a handle sheath so your case can sit on top of a rolling suitcase.

Rugged strap connectors with clipped strap

Carry handles

Lightweight

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: Accessory bag large enough to hold a Meanwell 90W PSU and IEC Power cable with room to spare.

Extra large zipper

Two inner mesh pockets

Dimensions: 21cm x 4.5cm x 14.5cm (8.25" x 1.75" x 5.75 )

Notes: Your Palette case is the ideal solution for your space conscious and portable needs. At about the same size as a small laptop, your Palette fits comfortably on your desktop; in your backpack; at your favourite coffee shop; in your jam space; or pretty much anywhere else you might desire to play. Your imagination is the only limit. With 62hp of rack space, you can piece together powerful but focused mini systems and control surfaces. Intellijel's 1U row and built-in i/o ports add a ton of extra utility to bring the most out of your Eurorack modules. Truly a palette for the sonic artist.

Utilities panel:

- Dual 1:4 buffered multiple
- Two 1/4" balanced audio jacks that can be connected to the Stereo Line Out 1U, Pedal I/O 1U or Mixup
- 1/8" (6.35mm) MIDI Input that can be connected to uMIDI 1U
- USB port that connects to the uMIDI 1U and other future modules
- Rocker switch and barrel plug for power entry

Construction:

- Anodized aluminium
- Aluminium extruded rails with steel threaded inserts
- Rubber feet to protect your desktop
- Rear mounted power supply for maximum module depth

Includes:

- 40W Meanwell AC/DC adapter with right angled connector
- 3FT North American IEC power cable
- 1/8" (6.35mm) TRS to 5-Pin Din MIDI adapter

Notes: Your Palette case is the ideal solution for your space conscious and portable needs. At about the same size as a small laptop, your Palette fits comfortably on your desktop; in your backpack; at your favourite coffee shop; in your jam space; or pretty much anywhere else you might desire to play. Your imagination is the only limit. With 62hp of rack space, you can piece together powerful but focused mini systems and control surfaces. Intellijel's 1U row and built-in i/o ports add a ton of extra utility to bring the most out of your Eurorack modules. Truly a palette for the sonic artist.

Utilities panel:

- Dual 1:4 buffered multiple
- Two 1/4" balanced audio jacks that can be connected to the Stereo Line Out 1U, Pedal I/O 1U or Mixup
- 1/8" (6.35mm) MIDI Input that can be connected to uMIDI 1U
- USB port that connects to the uMIDI 1U and other future modules
- Rocker switch and barrel plug for power entry

Construction:

- Anodized aluminium
- Aluminium extruded rails with steel threaded inserts
- Rubber feet to protect your desktop
- Rear mounted power supply for maximum module depth

Includes:

- 40W Meanwell AC/DC adapter with right angled connector
- 3FT North American IEC power cable
- 1/8" (6.35mm) TRS to 5-Pin Din MIDI adapter

Notes: Tin - Large

Screw-top container for holding mounting screws, adapters, or other special accesories.

Powdercoated aluminum with silkscreened graphics

Dimensions: Round D68mm x H25mm

Notes: What started as a simple plan to develop a new line of patch cables, quickly became an engineering feat in typical Joranalogue fashion. After countless hours of stripping cables, benchmarking crosstalk and high frequency performance, and designing in-house cable testing tools, Patch is the result of these efforts.

Patch is a series of top-quality patch cables for the discerning modularist, available in black and white, and a variety of lengths. Constructed using a custom-made coaxial base cable and over moulded mini-jack plugs, protected by unique laser-cut aluminium shells, these Eurorack cables are designed to outlast and outperform.

Lengths 15, 30, 60 and 90 cm are available in 8-packs, while the extra-long 150 cm cables are supplied in 4-packs.

Premium patch cables with 3.5 mm mono mini-jack connectors for Eurorack modular synthesiser use.
Engineered for audio, CV as well as analogue video signals.
Unique anodised aluminium shells and heavy duty bend reliefs for long life span.
7 inner signal and 40 outer shield conductors of 100 % ultra-pure oxygen free copper.
Extra-flexible PVC outer sleeve: satisfying 'droop' without crinkles.
Safely packaged in a reusable cotton bag with branded hook-and-loop cable tie included.
Incredibly fun to patch with. (Seriously!)
Designed in Belgium; made in China.

Notes: What started as a simple plan to develop a new line of patch cables, quickly became an engineering feat in typical Joranalogue fashion. After countless hours of stripping cables, benchmarking crosstalk and high frequency performance, and designing in-house cable testing tools, Patch is the result of these efforts.

Patch is a series of top-quality patch cables for the discerning modularist, available in black and white, and a variety of lengths. Constructed using a custom-made coaxial base cable and over moulded mini-jack plugs, protected by unique laser-cut aluminium shells, these Eurorack cables are designed to outlast and outperform.

Lengths 15, 30, 60 and 90 cm are available in 8-packs, while the extra-long 150 cm cables are supplied in 4-packs.

Premium patch cables with 3.5 mm mono mini-jack connectors for Eurorack modular synthesiser use.
Engineered for audio, CV as well as analogue video signals.
Unique anodised aluminium shells and heavy duty bend reliefs for long life span.
7 inner signal and 40 outer shield conductors of 100 % ultra-pure oxygen free copper.
Extra-flexible PVC outer sleeve: satisfying 'droop' without crinkles.
Safely packaged in a reusable cotton bag with branded hook-and-loop cable tie included.
Incredibly fun to patch with. (Seriously!)
Designed in Belgium; made in China.

Notes: 2mm thick aluminium panel, in bath-anodized finish, with high-quality light-grey printing.

Notes: 2mm thick aluminium panel, in bath-anodized finish, with high-quality light-grey printing.

Notes: 2mm thick aluminium panel, in bath-anodized finish, with high-quality light-grey printing.

Notes: 2mm thick aluminium panel, in bath-anodized finish, with high-quality light-grey printing.

Notes: 2mm thick aluminium panel, in bath-anodized finish, with high-quality light-grey printing.

Notes: ***B-STOCK: Box opened, product in perfect working order***


This is the powered version that includes the case as described here, a Strom+ module, a Strom power supply (AC/DC adapter) and a Strom busboard with connector cable. You only need to plug modules into the case and you’re ready to go!

One case fits 84HP of modules with a depth of 70mm.

The cases can be used with an incredible amount of flexibility to swap in an out full rows and create larger setups using the Case Connectors and Case Standoffs.

The side cheeks are made of high-quality Finnish plywood and are coated with a durable transparent melamine film. The black surface is hardwearing and crack resistant as well as easy to clean.

All cases are shipped with a set of 4 rubber feet and 50 x M3 screws.

Notes: Use this panel to mount your Field Kit FX in your Eurorack System.

Please note: This only includes the Eurorack Panel, NOT the full Field Kit FX.

Notes: O/O is a tri-use touch patching implement for banana jack modular systems.

1. AllFlesh style expressive touch patching using your body and hands as patch cables between two (or many more) points in your system. Unlike AllFlesh for 3.5mm systems O/O allows for stacking of other cables.

2. Traditional shorting bar.

3. Touchable shorting bar configuration for systems which accept this standard (ie. Buchla Music Easel). Touch in tandem with other singular plug style configurations.

The two different kit choices will supply you with parts for10 single touch points or 5 touchable shorting bars plus 5 touch points. Similar to AllFlesh, these touch points will attenuate voltages through the skin. Each person's skin will have a different amount of attenuation over voltage. Using one hand to touch two points is less attenuation than using two hands to bridge connection. Different modules and systems will also respond differently to touch patching. Results are guaranteed to vary between person to person and system to system.

Soldering along the edges of where the plug meets the plate can be helpful for increased continuity. The tips of the plugs have a collar that can spin around it (egg beater like shape pictured above), if you would like to decrease the touch plate's ability to move from side to side add a small amount of solder to the tip bridging the gap between the spinning collar and tip.

SPECIFICS:

-DIY kit for up to 10x singular touch points or 5x touchable shorting bars and 5 singular touch points

-Immersion Gold touch plates

-4mm gold plated Banana plugs

-Can be patched using skin and/or by stacking cables

NOTICE:

-This is a DIY kit with some soldering required.

-Use only within one system or rack of professionally produced synthesizer modules.

-Use at your own risk, we are not responsible for damage to persons or goods.

-Do not use with other instruments or purposes beyond modular synthesizer patching.

Notes: LOCI Accessory

A great addition to any LOCI modular stand.
Assembled in seconds
Includes 2 half shelves that can be connected in a number of ways
The accessory comes with 2 mini wings that can also act as stabilisers for larger items
Includes 2 hook and loop cable ties which can also be used to strap stands together when in back to back formation
Super strong Eurorack or synth stand
Precision laser cut from 6mm oak veneer
Beautifully detailed
Non-slip bands
Packs flat to slide in your case

Please note: This product is an accessory. It is not and does not include a desktop stand.

Notes: LOCI Crate 30 is a 30hp case for small Eurorack configurations. Supplied with strong 3D printed LOCI Rails (inspired by vector rails) and stainless steel threaded strips. At just L49.99 RRP inc VAT it's an incredibly affordable route into the modular synth world.

Great for small Eurorack Modular setups.
Assembled in seconds.
Super strong.
Precision laser cut from ethically sourced and renewable 6mm Oak veneer.
Beautifully detailed with laser etched logo.
Non-slip pads.

Notes: 10hp blank panel for modular synth system

Notes: Make Noise's 208hp 7U 4 Zone CV Bus Case arrives ready to use. Just add modules, patch cables and inspiration. The powder coated metal construction offers excellent mechanical durability. The lid is removable and can be closed with the system fully patched. The sleek matte black finish was selected to match Make Noise's line of Black & Gold modules, and it looks great with just about any module installed. This finish will show the story of your modular synth's travels over the years.

The Make Noise 4 Zone Power Bus Board is a new approach to accommodating the ever-growing universe of Eurorack modules. The multi-zone solution is like having 4 independent bus boards in a convenient single bus board package. Each Zone features isolated +12 VDC and -12VDC supplies and a dedicated ground return path. The +5VDC supply is shared amongst all 4 zones.

The multiple section of the CV Bus was originally designed in 2013 for Alessandro Cortini's personal Make Noise system. It provides visual indication of level, rate and polarity for up to 4 control signals that will be shared throughout a patch. These 4 control signals are colour coded and distributed across the centre of the system allowing for quick, clean and intuitive patching. The distribution method is unlike the typical multiple since the control signals will appear beneath their possible destinations allowing for the use of shorter patch cables. The colour coding and visual indication makes navigating complex patches easier and more intuitive. Typically, the CV Bus would be used to share the most important control signals in a patch such as your Master Clock.

This new version of the CV Bus also includes useful modular utilities:

The Voltage Math is found at the left end of the CV Bus. Like the similar circuit on the 0-Coast, it is a small collection of universally useful modular utilities. The two inputs are summed at the output, one at unity and one adjusted by the input attenuverter. The attenuverted input is also normalled to a DC offset, for purposes of level shifting, voltage mirroring etc. The output strength and polarity is indicated by the Green and Red output LEDs.

A high quality Stereo Line Driver converts powerful modular synthesizer signal levels to the commonly used Line Level. There are mini-jack inputs for Left or Mono, and Right for Stereo sound, a single master volume control, as well as a stereo line output pair, and finally a TRS line/headphone out on a single jack. This output is capable of driving a long cable out to a PA System or a set of Headphones. It is AC coupled with a built-in limiting circuit (with visual indication) that prevents damage to ears and PA system when the patching gets experimental.

Includes

Two 104 hp 3U rows for Eurorack modules, One 104hp 1U row fitted w/ CV Bus
Hybrid switched/linear power solution for low noise and excellent load regulation
Multi-Zone, allowing isolation of noise-prone modules from noise-sensitive ones
Black powder coated metal w/ embossed logo on lid
Sealed to keep dust out during travel or storage
Lid offers space to close w/ your system patched
Recessed side mounted on/off switch and power inlet for safe travel
Locking power connector helps prevent on-stage power loss accidents
Solid carrying handle and rubber feet so the case travels w/ ease
Meets carry-on luggage size requirements for most airlines
Universal AC power adapter works world wide (Need IEC Cable for non-US outlets)
Blued Steel Stand sold separately

Specifications

Size: 7U
Total HP: 208 @ 3U, 104 @ 1U
Outer Dimensions:
22.25" x 14" x 7.25" w/ lid
Max Module Depth: 2.5"
Weight: 12.75 lbs. (w/ powered bus board, CV Bus installed)
Power: +12VDC @ 4A, -12VDC @ 2.4A and +5VDC @ 1A
Connectors: 32
Includes: CV Bus, Powered Bus Board, 120 Sliding M2.5 nuts w/ Black screws, AC Adapter

Notes: Rep your Modbap love with style with these 2 new shirt designs from Modbap Modular! Both shirts feature premium Gildan 100% cotton black t-shirt with large screen printed Modbap logo (either the classic Square logo or the new Inception logo) and woven logo hem tag. Each shirt comes with a wide range of sizes to choose from, from small to triple XL. From long sessions in the studio to live performances, Modbap shirts will keep you comfortable and styled no matter the situation.

Notes: Rep your Modbap love with style with these 2 new shirt designs from Modbap Modular! Both shirts feature premium Gildan 100% cotton black t-shirt with large screen printed Modbap logo (either the classic Square logo or the new Inception logo) and woven logo hem tag. Each shirt comes with a wide range of sizes to choose from, from small to triple XL. From long sessions in the studio to live performances, Modbap shirts will keep you comfortable and styled no matter the situation.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Introducing the special edition Pod20 customized for ModBap Modular by 4ms, the Modbap20.

The Modbap20 Powered Eurorack Case can be your on-ramp to eurorack, a great option for a focused mini system, or a live control surface, or the perfect way to expand a larger system. The Modbap20 is 20HP in width, and 34mm deep with 4ms power bus boards. The included power brick and your favorite combination of up to 20HP modules are all you need to get started with your new mini system, control pod, performance pod, effects pod, or whatever you so desire.

Features

20HP wide, 34mm deep powered Eurorack case
power brick (included)
Available power: 0.7A (+12V), 0.28A (-12V), 0.2A (+5V)
Rugged anodized aluminum construction