Tags: Wooden instrument cases

Notes: Quality wooden sides for Vermona Retroverb Lancet. Looks great on your desktop.

Note: Retroverb Lancet unit is sold separately.

Notes: Plain MDF Roland Boutique Custom Made Recessed Stand / End Cheeks for the JX03, JP08, JU06, SE02, TR09, TB03, TR08 etc.

This new version of the stand holds 3 Roland Boutique synths, This has been precision machined with a CNC Router sp the boutiques lock firmly in place and cannot fall out.

This will fit all the Roland Boutiques, however you will need to remove them from the additional case DK01 that they come with.

This stand has been made from MDF wood, and is connected via 8x allen head Confirmat Screws (Allen Key & Screws Provided) into an mdf wooden bar.

These are a great addition to the Boutique synths and give a much nicer look and better working angle.

The Boutique Synths are gripped in place by the sides of the stand, so do not fully tighten the screws until the units are placed inside then-tightened screws to hold firmly in place. Make sure you do this on a flat surface to ensure the feet are correctly aligned.

This item will need assembly as it will be sent flat packed. All screws, tools and rubber feet are provided however you must buy your own Roland Boutique Synth.

Notes: This stand has been precision-machined and hand finished. You have the option of 2 different work angles, and it has a raise at the front so it can be placed behind a keyboard.

The stand is assembled using the existing screws, and 4x small magnets are provided, to go over the screws so you can use the logo that comes with the synth.

Please note, you will get only the oak stand: you must purchase your own Novation Peak.

The item will need assembly as it is sent flat packed. All screws are provided; this includes the small rubber feet.

Notes: This version of the stand holds 3 Korg Volcas although the Korg SQ1 will also fit.

This stand is made from Oak Veneered MDF, and is connected via 12x allen head Confirmat screws (Allen Key & Screws Provided) into a mdf wood bar.

The Volcas fit snuggly into the stand, so do not fully tighten screws until the Volca is placed inside then tighten screws to hold in place firmly. Make sure you do this on a flat surface, to ensure the feet are correctly aligned.

The item will need assembly as it will be sent flat packed. All screws and tools are provided; this includes the small rubber feet. However, you must buy your own Korg Volca.

Notes: This stand has been precision-machined and hand finished. The panels have been recessed for your Push 2 to make sure its held firmly in place. A much nicer working angle has been added for your studio setup.

The stand is assembled by connecting the side panels with 4x Confirmat Screws. All the fixings and an allen keys to assemble your stand ready for use are provided.

Please note: you will get only the oak stand, you must purchase your own Push 2.

The item will need assembly as it is sent flat packed- all screws and tools are provided, this includes the small rubber feet.

Notes: You are looking at custom-made Korg Volca QUAD Stand / End Cheeks.

This stand holds 4 Korg Volcas, although the Korg SQ1 will also fit.

This stand is made from MDF Fibreboard, and is connected via 16x allen head Confirmat screws (Allen Key & Screws Provided) into a mdf wood bar.

Please note: you will get plain MDF and not darker like in some of the photos.

These are a great addition to the Volcas, and give a much nicer look and working angle. You can also flip them round to have a much steeper angle if you prefer. These can also be painted with ease or stained with wood stain to suit your studio.

The Volcas fit snuggly into the stand so do not fully tighten the screws until the Volca is placed inside then tighten screws to hold in place firmly. Make sure you do this on a flat surface, to ensure the feet are correctly aligned.

The item will need assembly as they will be sent flat packed. All screws and tools are provided; this includes the small rubber feet. However, you must buy your own Korg Volca.

Notes: This stand is made from MDF and is connected via 8x allen head Confirmat screws (Allen Key & Screws Provided) into a MDF wood bar.

Notes: Triple Oak Veneer stand for the Roland Aira Compact Range S1, E4, J6 & T8

This stand has been precision machined form Oak Veneered MDF and fits any 3 of the Roland Aira Compact models.

Once assembled this take up a much smaller footprint in the studio and gives you much better working angles.

The units are held in place into a recess into the side panels so are rock solid once assembled.

Please note you will only receive a wooden stand, you must purchase your own Roland Aira Compact Synths and Drum Machine.

A single version and triple versions are also available.

Notes: Dual Angle 8U Rackmount Black Valchromat stand for the Behringer 2600 Range

This stand has been precision machined from Black Valchromat and fits any of the 8u Behringer 2600 Synths, It comes complete with 8U Rails and all the Screws/Washers and Cage nuts provided.

Once assembled, this allows you to choose from 2 working angles either shallow or steep depending on how you like it.

Please note you will only receive 2x Black Valchromat Side Panels with 2x 8u Rails with 8x Nuts/screws and washers, you must purchase your own Behringer 2600 Synth.

Other versions are also available in Oak Veneered MDF and Black Valchromat.

Notes: Solid Oak Dual Stand for the Modal Electronics Argon 8M and Cobalt 8M Synthesiser

This dual oak stand has been made from solid FSC Certified Oak, and precision machined using a CNC.

The stand is fixed by removing the original end cheeks and replacing them with the oak stand using the original screws.

The Oak comes oiled to bring out the grain and should stay looking beautiful for a long time.

These are a great addition to the amazing Modal Synths and give a much nicer working angle, whilst saving desk space.

NOTE: you must buy your own Synth; all you will get is 2 wooden cheeks.

Notes: Dual Angle 8U Rackmount MDF stand for the Behringer 2600 Range

This stand has been precision machined from MDF and fits any of the 8u Behringer 2600 Synths, It comes complete with 8U Rails and all the Screws/Washers and Cage nuts provided.

Once assembled this allows you to choose from 2 working angles either shallow or steep depending on how you like it.

Please note you will only receive 2x MDF Side Panels with 2x 8u Rails with 8x Nuts/screws and washers, you must purchase your own Behringer 2600 Synth

Other versions are also available in Oak Veneered MDF and Black Valchromat.

Notes: Dual Angle 8U Rackmount Oak Veneered MDF stand for the Behringer 2600 Range

This stand has been precision machined from Oak Veneered MDF and fits any of the 8u Behringer 2600 Synths, It comes complete with 8U Rails and all the Screws/Washers and Cage nuts provided.

Once assembled this allows you to choose from 2 working angles either shallow or steep depending on how you like it.

Please note you will only receive 2x Oak Veneered MDF Side Panels with 2x 8u Rails with 8x Nuts/screws and washers, you must purchase your own Behringer 2600 Synth

Other versions are also available in MDF and Black Valchromat so please check my other listings.

Notes: Solid Oak Replacement End Cheeks for the Modal Electronics Argon 8m and Cobalt 8m Synthersizer.

These FSC Certified Oak end cheeks have been precision machined using a CNC.

They fix to your synth by removing the original end cheeks and replacing them with these using the original screws.

The Oak comes oiled to bring out the grain and should stay looking beautiful for a long time.

These are a great addition to amazing Modal Synths, and give a vintage look.

NOTE: you must buy your own synth; all you will get is 2 wooden cheeks