All genres charts

Notes: 3,5mm TRS to male DIN 5

150cm length

Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.

Notes: Standard Eurorack power cable.

Use the 10-16 variant for most modules. 16-16 is for modules that use the internal +5V rail.

Length: 25CM (9.8")

Notes: The Befaco Synth Duster is a super soft brush to keep your modular synth and audio equipment far away from dust.

Notes: NiftyBUNDLE is a collection of Cre8audio's most essential euro rack synth components:

Case, modules, power, MIDI to CV, and "enough patch cables to get into trouble" are all included.

The NiftyBUNDLE is made up of the following Cre8audio components:

NiftyCASE

The Cre8audio NiftyCASE is a moderately sized euro rack case with HUGE possibilities!

NiftyCASE is more than just a basic eurorack case; it provides all the power and connection possibilities you could possibly ask for. NiftyCASE offers a beefy 2A of cumulative current via its +12v -12v and +5v power rails, ideal for all your modules.

Connecting your NiftyCASE to computers or MIDI devices is a breeze thanks to the built-in MIDI to CV conversion. NiftyCASE takes either DIN-MIDI from any DIN-MIDI device or USB-MIDI from your computer and turns it into eurorack compatible CV, gate, mod, and clock signals.
NiftyCASE's DIN-MIDI thru lets you easily daisy-chain multiple NiftyCASES and easily integrate NiftyCASE with your MIDI equipment.

The NiftyCASE is the perfect size for a portable eurorack case being 84hp wide; that means NiftyCASE isn't super tiny or super huge- it's just the right size for all of the cardboard boxes they're shipped in.

Chipz and Cellz modules

Chipz is a chiptune-inspired eurorack synth module, which will take you back to the halcyon sounds of the '80s.

Cre8audio describe chips as ideal for those who speak "bleep blop". They say that Chipz is "full of heaping piles of beeps, blops, and probably some other stuff too. It's got a couple of voices and some wacky LFO junk, perfect for getting your body wobbling"

Putting all of that into language you might understand a little more, Chipz is a dual VCO and dual LFO module with each offering sine, triangle, saw, square, and noise waveforms.

Cellz is another wacky module from the deranged minds over at Cre8audio. A programmable CV touchpad where each touch segment can be tuned to 2 different CV values then played by hand, sequenced, and arpeggiated.

Box 'O' Cables & Blanking Panels

To get you up and running, the NiftyBUNDLE also comes with Cre8audio's Box 'O' Cables, allowing you to get patching and making noise straight away. The NiftyBUNDLE also includes some Cre8audio branded panel blanks to fill empty eurorack space.

Included in the NiftyBUNDLE:
NiftyCASE
NiftyCASE 15v 2.4A PSU
Chipz
Cellz
Box 'O' Cables
2x Cre8audio "8" panel blanks

Specifications:

Useable case area = 84hp
Internal depth = 55mm
Weight = 1.8kg
6.8cm x 44.6cm x 18.6cm
Range of cv out 1 = 0-10V
Range of cv out 2 = 0-10V
Voltage output gate 1 - off =0 on =5?off = 0 on = 4.65?
Voltage output gate 2 - off =0 on =5?off = 0 on = 4.65?
Voltage output mod = 1-10V
Voltage output clock - off =0 on =5
Power output for modules
+12V - 1500mA peak output**
-12V - 500mA peak output**
+5V - 500mA peak output**
1/4" ts mono output on rear
MIDI in via USB and 5 pin Din
MIDI thru via 5 Pin Din and USB

Notes: Mantis have taken years of experience with Eurorack to create a low-cost case that makes the Eurorack modular synthesizer look, work, and feel like a professional instrument. Mantis is an instrument that is at home on stage, touring, or in the center of the studio.

Mantis has two rows of 104HP for you to rack your modules. It comes fully powered and assembled, just drop in your modules and play.

Using its sophisticated leg mechanism, you can set it to three different positions: 0, 45, and 90 degrees.

Power Power and more Power! With Mantis, say bye-bye to the tedious, never-ending calculation of current consumption for the i12V power. Mantis comes with a juicy Zeus power supply that delivers plenty of power both now and for the future.

Mantis deep black coloru gives you another option to customize your Eurorack look and matches perfectly with black Tiptop Audio modules.

Mantis comes with real Z-Rails made according to Eurorack enclosure standards. No sliding nuts or wrong spacing! It also has keyed power connectors to help protect your modules from damage from plugging the power in in reverse.

Weighing only 3kg/6.5lb, Mantis is so light, traveling has never been so relaxed.

Dual Mantis Studio Brackets

Using the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your Mantis and watch your studio setup grow.

Notes: Two units of the 6-way Squid multiplier cable.

Notes: Get your patch cables out of the way of your patching with these right-angle patch cables. Pack of eight 24" (60cm) cables are available in the Modbap Modular brand colors - blue, pink, black, and white. Options include all eight cables in one color or choose a variety of colors.

Pack of 8 cables

Right angle to right angle

Modbap brand logo moulded

1/8" to 1/8" (3.5mm to 3.5mm)

Notes: Flying Bus Board for up to eight Eurorack modules.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod64X is 64HP with 2.16" (55mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick, or a barrel cable to daisy-chain to a Pod or Row Power that's already powered.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered)

Each Pod64X typically will house up to six modules, but more can be accommodated using a multi-power cable accessory.

Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy- chain with the 4ms Row Power system making them a convenient outboard mini-skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

64 HP of Eurorack modular space
Extra room for deep modules
Standard M3 threaded holes
100% lightweight anodized aluminum
Built-in Power supply
Red, White, and Blue LED power indicators

Includes:

64HP Pod, black anodized aluminum
Built-in power supply with six Eurorack power headers
Extra deep (2.16"/55mm) fits virtually every Eurorack module
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Does not include barrel cable or power brick
Power Supply:

Four 16-pin Eurorack power shrouded headers
+12V max 1.4A
-12V max 0.67A
+5V max 1.0A
Power input: Two barrel jacks for daisy-chaining
15V-20VDC, 2.1mm positive tip
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.5 kg = 17 oz

Notes: Flying Bus (male pin) are passive power distribution cables that work with the Row Power to distribute power to your modules.

Can be daisy-chained if extra headers are needed. One 14" flying bus cables with 7 male header pins.

Notes: Blank panel, 4HP, constructed from anodised aluminium, black.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod26 is 26HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod26 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: 4ms blank panel - 1HP width. Black coloured PCB material with 4ms logo.

Notes: Make Noise's 208hp 7U 4 Zone CV Bus Case arrives ready to use. Just add modules, patch cables and inspiration. The powder coated metal construction offers excellent mechanical durability. The lid is removable and can be closed with the system fully patched. The sleek matte black finish was selected to match Make Noise's line of Black & Gold modules, and it looks great with just about any module installed. This finish will show the story of your modular synth's travels over the years.

The Make Noise 4 Zone Power Bus Board is a new approach to accommodating the ever-growing universe of Eurorack modules. The multi-zone solution is like having 4 independent bus boards in a convenient single bus board package. Each Zone features isolated +12 VDC and -12VDC supplies and a dedicated ground return path. The +5VDC supply is shared amongst all 4 zones.

The multiple section of the CV Bus was originally designed in 2013 for Alessandro Cortini's personal Make Noise system. It provides visual indication of level, rate and polarity for up to 4 control signals that will be shared throughout a patch. These 4 control signals are colour coded and distributed across the centre of the system allowing for quick, clean and intuitive patching. The distribution method is unlike the typical multiple since the control signals will appear beneath their possible destinations allowing for the use of shorter patch cables. The colour coding and visual indication makes navigating complex patches easier and more intuitive. Typically, the CV Bus would be used to share the most important control signals in a patch such as your Master Clock.

This new version of the CV Bus also includes useful modular utilities:

The Voltage Math is found at the left end of the CV Bus. Like the similar circuit on the 0-Coast, it is a small collection of universally useful modular utilities. The two inputs are summed at the output, one at unity and one adjusted by the input attenuverter. The attenuverted input is also normalled to a DC offset, for purposes of level shifting, voltage mirroring etc. The output strength and polarity is indicated by the Green and Red output LEDs.

A high quality Stereo Line Driver converts powerful modular synthesizer signal levels to the commonly used Line Level. There are mini-jack inputs for Left or Mono, and Right for Stereo sound, a single master volume control, as well as a stereo line output pair, and finally a TRS line/headphone out on a single jack. This output is capable of driving a long cable out to a PA System or a set of Headphones. It is AC coupled with a built-in limiting circuit (with visual indication) that prevents damage to ears and PA system when the patching gets experimental.

Includes

Two 104 hp 3U rows for Eurorack modules, One 104hp 1U row fitted w/ CV Bus
Hybrid switched/linear power solution for low noise and excellent load regulation
Multi-Zone, allowing isolation of noise-prone modules from noise-sensitive ones
Black powder coated metal w/ embossed logo on lid
Sealed to keep dust out during travel or storage
Lid offers space to close w/ your system patched
Recessed side mounted on/off switch and power inlet for safe travel
Locking power connector helps prevent on-stage power loss accidents
Solid carrying handle and rubber feet so the case travels w/ ease
Meets carry-on luggage size requirements for most airlines
Universal AC power adapter works world wide (Need IEC Cable for non-US outlets)
Blued Steel Stand sold separately

Specifications

Size: 7U
Total HP: 208 @ 3U, 104 @ 1U
Outer Dimensions:
22.25" x 14" x 7.25" w/ lid
Max Module Depth: 2.5"
Weight: 12.75 lbs. (w/ powered bus board, CV Bus installed)
Power: +12VDC @ 4A, -12VDC @ 2.4A and +5VDC @ 1A
Connectors: 32
Includes: CV Bus, Powered Bus Board, 120 Sliding M2.5 nuts w/ Black screws, AC Adapter

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

Each end of the cable has a male and female jack. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), 24in (60cm).

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

One end of the cable has a male and female jack, the other end as just a male connector. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), and 24in (60cm).

Notes: Branded Analogue Solutions LED Jack Pins.

These will light red / green as the signal swings from a positive to negative voltage.

Use the for diagnostics - or, just because they look cool (especially in the dark!)

The plugs are slightly translucent and you can see the core of the cable. Material is a soft touch rubber that is presently flexible.

Plugs are embossed with the words ANALOGUE SOLUTIONS and also the logo.

These don't just look pretty - they have practical advantages too!

Help seeing what's going on in the dark!

Help diagnose signal flow.

Notes: The tools we use to compose and produce music are dear to our hearts.

Dust, liquid and accidental impact have taken many a good modular synth down over the years - this is where Decksaver steps in.

Precision designed and trimmed for a perfect fit, whilst still accommodating cables, the Eurorack Go can sit ready for operation.

This cover is designed with additional clearance for patch cables, meaning you can leave your cables in place when travelling or protecting your modular setup in the studio.

Shields delicate controls and internal components from damage at home, on the road and on stage.

Dimensions

Weight: 1.35kg
Length: 72.6cm
Width: 31.2cm
Height: 8.2cm

Notes: The Daisy Patch Submodule is a DSP platform for Eurorack synthesizer modules. It features a lightning fast STM32 processor, high fidelity stereo audio codec, and enough RAM for 10 minute long buffers - all with standard signal levels and conditioning for the Eurorack ecosystem.

Simply design your carrier board, and let the Patch Submodule do the rest!

Programming is a breeze with support for C++, Max/MSP Gen~, Pure Data, Arduino, and more. These languages can be coupled with our open source DSP library, DaisySP, for a powerful music synthesis programming environment.

Create your dream Eurorack module with the Daisy Patch SM!

STM32 processor at 480MHz, 96kHz / 24-bit audio, RAM for up to 10 minute audio buffers

Stereo audio IO, x12 ADC inputs ( 16-bit bipolar CV or potentiometer), x2 CV outputs (12-bit), x2 gate inputs, x2 gate outputs, x12 GPIO

Flash firmware over USB via open source web programmer

Support for SDDMC, SPI, UART, I2C, and USB

FCC / CE Tested and Compliant

Notes: This is 40 cm (15.7 inch) long cable for connecting the DROID controllers controllers to your master. Its main purpose is to separate the controllers from the master at a longer distance.

You also can use this cable for connecting two of Der Mann Mit Der Maschine's multiples into a CV bus.

Notes: Desktop enclosure case for the Empress Zoia Euroboro- 12v power supply included. Euroboro not included- picture shown for demonstration purposes only.

Notes: Get your patch cables out of the way of your patching with these right-angle patch cables. Pack of 8 cables are available in the Modbap Modular brand colours - blue, pink, black, and white. Lengths are 6inch, 9inch, 12inch, and 18inch.

What's in the package:

2 x 6" (blue)
2 x 9" (pink)
2 x 12" (black)
2 x 18" (white)

Notes: Modbap branded Velcro Cable Ties. Package of 40 in four brand colours - pink, blue, black and white.

Notes: Digital lightpipe optical audio cable.

Notes: Optional accessory replacement panel.

Black anodised alu + heavy duty screen printing.

Notes: ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.

The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.

These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.

Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.

Great modern cases

The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.

A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.

The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.

Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.

6U / 84HP

Provides up to 2 Amp power total on each -12V & +12V rails (1 Amp total per row)
Connections for up to 32 modules.
Includes 5 Amp power 'brick'

Notes: ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.

The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.

These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.

Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.

Great modern cases

The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.

A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.

The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.

Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.

3U / 52 HP

Provides up to 1 Amp power on each -12V & +12V rails.
Connections for up to 9 modules.
Includes 2 Amp power 'brick'

Notes: ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.

The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.

These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.

Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.

Great modern cases

The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.

A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.

The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.

Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.

6U / 52 HP

Provides up to 1 Amp power on each -12V & +12V rails.
Connections for up to 9 modules on busboard, with additional 'flying bus board' included that adds up to 12 connectors.
Includes 2 Amp power 'brick'

Notes: Dust cover for the ALM 52HP 6U Synth Module Case.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audior that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.