100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synth module accessories

Home  Equipment  

Synth module accessories

Options
Items 1 to 50 of 53 on page 1 of 2
1  2  »
Subscribe to our weekly Studio Equipment emails
Cat: 752442 Rel: 25 Oct 19
 
32HP metal enclosure for Eurorack modules with built-in power supply - Beta version
Notes: Limited Beta version of the popular Pod32. These are new, fully tested and functional units. The only difference between the Pod32 Beta and the regular Pod32 is that the Beta version has fewer holes to screw in modules. Most common Eurorack sizes will fit from 4HP to 32HP, but some odd sizes and combinations won't fit. Please refer to the product image, or visit the 4ms website for possible module combinations.

This Pod requires a power brick (not included). Or, if you already have a Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain power supplies.

Pods are a perfect way to get started in Eurorack module, or add a couple more modules to your monster system!

Made from 100% anodized aluminium, Pods are light, tough and perfect for on-the-go set ups. Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!
Read more
 7 in stock $68.03
Click for better price!
or call +44 20 7424 1960
quote 752442
Cat: 757949 Rel: 09 Dec 19
 
Din-sync adapter cable
Notes: ALM Busy Circuits' Din-Sync Adapter cable lets users route "clock" and "run" Din-Sync signals via two 3.5mm mono jacks. It's a great way to sync one's Eurorack modular sequencer with external drum machines, synthesizers, and more.
Read more
 2 in stock $7.56
Cat: 757951 Rel: 09 Dec 19
 
MIDI-TRS adapter
Notes: Break out MIDI signals into a 3.5mm stereo jack.

- Tip = Pin 4 (Source)
- Ring = Pin 5 (Sink)
- Sleeve = Pin 2 (Shield)
Read more
 4 in stock $4.32
Cat: 739913 Rel: 20 Sep 19
 
Pack of 25 Bananuts in black colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 3 in stock $8.59
Cat: 739906 Rel: 20 Sep 19
 
Pack of 25 Bananuts in blue colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 4 in stock $8.59
Cat: 739912 Rel: 20 Sep 19
 
Pack of 25 Bananuts in green colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
$8.59 SAVE 10%
 4 in stock $7.72
Cat: 739909 Rel: 20 Sep 19
 
Pack of 25 Bananuts in orange colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 3 in stock $8.59
Cat: 739907 Rel: 20 Sep 19
 
Pack of 25 Bananuts in purple colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
$8.59 SAVE 10%
 4 in stock $7.72
Cat: 739908 Rel: 20 Sep 19
 
Pack of 25 Bananuts in red colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 2 in stock $8.59
Cat: 739911 Rel: 20 Sep 19
 
Pack of 25 Bananuts in white colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
$8.59 SAVE 10%
 4 in stock $7.72
Cat: 739910 Rel: 20 Sep 19
 
Pack of 25 Bananuts in yellow colour
Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!
Read more
 3 in stock $8.59
Cat: 757350 Rel: 28 Nov 19
 
Replacement knob for Doepfer modules - black
Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Black finish.
Read more
 2 in stock $2.15
Cat: 757357 Rel: 28 Nov 19
 
Replacement knob for Doepfer modules - blue
Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Blue finish.
Read more
 1 in stock $2.15
Cat: 757355 Rel: 28 Nov 19
 
Replacement knob for Doepfer modules - brown
Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Brown finish.
Read more
 1 in stock $2.15
Cat: 757356 Rel: 28 Nov 19
 
Replacement knob for Doepfer modules - green
Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Green finish.
Read more
 1 in stock $2.15
Cat: 757348 Rel: 28 Nov 19
 
Replacement knob for Doepfer modules - grey
Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Grey finish.
Read more
 2 in stock $2.15
Cat: 757358 Rel: 28 Nov 19
 
Replacement knob for Doepfer modules - magenta
Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Magenta finish.
Read more
 1 in stock $2.15
Cat: 757354 Rel: 28 Nov 19
 
Replacement knob for Doepfer modules - orange
Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Orange finish.
Read more
 1 in stock $2.15
Cat: 757353 Rel: 28 Nov 19
 
Replacement knob for Doepfer modules - red
Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Red finish.
Read more
 1 in stock $2.15
Cat: 757351 Rel: 28 Nov 19
 
Replacement knob for Doepfer modules - white
Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. White finish.
Read more
 2 in stock $2.15
Cat: 757359 Rel: 28 Nov 19
 
Replacement knob for Doepfer modules - yellow
Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Yellow finish.
Read more
 1 in stock $2.15
Cat: 757360 Rel: 28 Nov 19
 
Replacement knob for Doepfer modules - vintage design
Notes: High quality rotary knob, for use with Doepfer or a wide range of modules. Robust design with indented edges. Retro style finish.
Read more
 1 in stock $4.32
Cat: 755421 Rel: 14 Nov 19
 
Robust, blank front panel for use with modular racks & other applications - 1HP wide
Notes: Blank panel, 1HP, constructed from anodised aluminium, silver.
Read more
 5 in stock $2.44
Cat: 755422 Rel: 14 Nov 19
 
Robust, blank front panel for use with modular racks & other applications - 1.5 HP wide
Notes: Blank panel, 1.5 HP, constructed from anodised aluminium, silver.
Read more
 2 in stock $2.70
Cat: 755424 Rel: 14 Nov 19
 
Robust, blank front panel for use with modular racks & other applications - 2HP wide
Notes: Blank panel, 2HP, constructed from anodised aluminium, silver.
Read more
MRP:$2.59
 8 in stock $2.44
Cat: 755425 Rel: 14 Nov 19
 
Robust, blank front panel for use with modular racks & other applications - 4HP wide
Notes: Blank panel, 4HP, constructed from anodised aluminium, silver.
Read more
MRP:$3.89 SAVE 31%
 8 in stock $2.70
Cat: 755428 Rel: 14 Nov 19
 
Robust, blank front panel for use with modular racks & other applications - 42HP wide
Notes: Blank panel, 42HP, constructed from anodised aluminium, silver.
Read more
 2 in stock $8.20
Cat: 755427 Rel: 14 Nov 19
 
Robust, blank front panel for use with modular racks & other applications - 8HP wide
Notes: Blank panel, 8HP, constructed from anodised aluminium, silver.
Read more
MRP:$5.18 SAVE 36%
 8 in stock $3.29
Cat: 755436 Rel: 12 Nov 19
 
Passive Eurorack bus board
Notes: The A-100BUS from Doepfer is a simple passive busboard for use with Eurorack modules. It features 14 power headers along with three sets of spade terminals for connection to power supplies such as the Doepfer PSU3 and daisy-chaining with other A-100 bus boards.
Read more
 1 in stock $38.87
Notes: Bus board to connect 14 modules

An assembled and tested bus board, 22 sockets, e.g. for customers who want to built their own case and need a bus board for A-100 modules, includes cables for connection to +/-12V power supply (4 wires with flat connectors on both ends, length about 30cm), but no mechanical parts (e.g. screws, spacers, nuts, washers).

In the new version of the A-100 bus board (labeled Version 6 / 2019) boxed pin headers are used which are equipped with a reverse protection (gap for the "nose" of the socket of the bus cable). When the bus cable coming from the module is connected to the boxed header in question the "nose" has to point to the right. The polarity of the cable is correct if the red wire of the bus cable then points to the bottom (to the continuous line labeled"RED WIRE" on the pc board). If this is not the case please do not connect the module to the bus board ! Otherwise both the module and the power supply (A-100PSU3) may be damaged ! In that case please contact the manufacturer of the module and ask for a suitable bus cable with the correct polarity of the connector.

The bus cables of original A-100 modules manufactured by Doepfer are equipped with suitable bus cables since 2012. Only for older A-100 modules manufactured before 2012 it may happen that the polarity of the 16 pin female connector of the bus cable is wrong (nose points to the left when red wire points to the bottom). This is because in the past unboxed pin headers were used and the position of the "nose" did not matter. In such a case please contact Doepfer or one of their dealers and order a suitable bus cable.
Read more
 1 in stock $36.19
Cat: 755435 Rel: 12 Nov 19
 
Miniature PSU/bus board
Notes: The A-100 MNT (Mini power supply/bus) is composed of a miniature power supply and system bus, with connectors for four modules. It's designed to be used with a small set-up of just a few modules, in your own custom-designed case. The idea is that then you can use individual A-100 modules - for instance the filters, the filterbank, frequency shifter, sampler, MIDI interface, etc. - as free-standing pieces of equipment, which can easily be integrated with your other instruments or recording equipment.

The power supply provides the usual A-100 system requirements of +12 V and -12 V, and an additional +5 V supply, for the few modules (for instance A-190, A-191) which need it. The maximum current loading capacity totals 100 mA for +/- 12 V and/or 50 mA for the +5 V supply.

The system bus provides connections for four System A-100 modules. As well as the power supply, it also carries "INT.CV" and "INT.GATE" connections (see A-100 manual, main introduction, chapter 3, 'The A-100 signal flow'.).

The A-100 MNT is supplied as standard with an external power supply, which has to be connected to the socket on the MNT's circuit board.
Read more
 1 in stock $48.59
Click for better price!
or call +44 20 7424 1960
quote 755435
Cat: 767218 Rel: 12 Nov 19
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The A-100 MNT (Mini power supply/bus) is composed of a miniature power supply and system bus, with connectors for four modules. It's designed to be used with a small set-up of just a few modules, in your own custom-designed case. The idea is that then you can use individual A-100 modules - for instance the filters, the filterbank, frequency shifter, sampler, MIDI interface, etc. - as free-standing pieces of equipment, which can easily be integrated with your other instruments or recording equipment.

The power supply provides the usual A-100 system requirements of +12 V and -12 V, and an additional +5 V supply, for the few modules (for instance A-190, A-191) which need it. The maximum current loading capacity totals 100 mA for +/- 12 V and/or 50 mA for the +5 V supply.

The system bus provides connections for four System A-100 modules. As well as the power supply, it also carries "INT.CV" and "INT.GATE" connections (see A-100 manual, main introduction, chapter 3, 'The A-100 signal flow'.).

The A-100 MNT is supplied as standard with an external power supply, which has to be connected to the socket on the MNT's circuit board.
Read more
 1 in stock $45.01
Cat: 755443 Rel: 13 Nov 19
 
48HP low cost frame with power supply
Notes: The A-100LC1 is very similar to the A-100LC3 but offers only 48 HP for installation of modules. A-100LC3 is equipped with the power supply A-100SSB.

The case is made of raw wood without lacquering. The case can be varnished by the customer in any desired colour e.g. by means of a spray can.

Quantity of bus boards: 1 (short version with 8 module connectors)
Read more
 3 in stock $108.00
Click for better price!
or call +44 20 7424 1960
quote 755443
Cat: 743113 Rel: 20 Aug 19
 
Compact budget Eurorack case
Notes: The A-100LC1v is a smaller version of the A-100LC3 with 48 HP of space. It is made out of raw wood, a black coating gives the Eurorack frame a vintage look. The built-in power supply, type A-100SSB, delivers up to 380 mA at +12 V and -12 V as well as 100 mA at +5 V.

The A-100LC1v comes equipped with one 48 HP measuring row for 3U modules. Its power supply features eight connectors for oscillators, filters and so forth. The case is connected to the grid via an IEC power socket.
Read more
 2 in stock $132.84
Click for better price!
or call +44 20 7424 1960
quote 743113
Cat: 760078 Rel: 17 Dec 19
 
High-quality low-cost Doepfer Eurorack case with power
Notes: This is the 3U version of the low cost cases A-100LC6/LC9. The A-100LC3 is very similar to the A-100LC6 but offers only one row with 84 HP for installation of modules. A-100LC3 is equipped with one power supply (1200mA) and one bus board. Because of the limited space the power supply of the DIY-Kit #1 with an external transformer is used (same as for the DIY-Kit #1: 15V AC/2500mA). At the left side of the case the connector for the external transformer is located. The external transformer is not shown in the pictures. A suitable transformer for the US market is manufactured by Triad Magnetics and has the product name WAU16-2400 (16V AC / 2.4A). It is available from several electronic shops like Mouser, Digikey, Newark, Farnell and others.

The case is made of raw wood without laquering. The case can be varnished by the customer in any desired colour e.g. by means of a spray can.
Read more
 2 in stock $166.33
Cat: 760082 Rel: 17 Dec 19
 
5 x Erica Synths voice cards
Notes: 5 DIY voice-cards that are empty, allowing users to develop their own patches.

Voice-cards with preset patches set it apart from other Eurorack systems - they allow the user to change patches instantly and radically, which makes the system well suited for experimental live performances.
Read more
 2 in stock $14.04
Cat: 755444 Rel: 05 Nov 19
 
Eurorack cable holder
Notes: We wanted to organize patch cables that were hanging on all possible objects in our Lab, therefore we decided to make patch cable holders.

Rigid, 2mm aluminium powder coated cable holders can host over 100 patch cables in perfect order! Two screws for fixing the cable holder are included.
Read more
 2 in stock $29.43
Cat: 760083 Rel: 17 Dec 19
 
10 x plain patch note sheets
Notes: Patch note sheets for Erica Synths Pico System III.
Read more
 2 in stock $8.63
Cat: 732130 Rel: 30 Sep 19
 
Desktop Eurorack enclosure
Notes: A beautiful 96hp Eurorack enclosure shaped with the warmth of walnut and the strength of steel. The Lifeforms Research Console Eurorack format modular case pairs classic desktop synthesiser ergonomics with a modern Eurorack form factor and reliable power supply. The Lifeforms Research Console was designed for the Voltage Research Laboratory but is the perfect enclosure for all desktop modular sound experiments.
Read more
MRP:$443.27 SAVE 19%
 1 in stock $358.58
Click for better price!
or call +44 20 7424 1960
quote 732130
Cat: 719730 Rel: 03 Sep 19
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 12 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
 2 in stock $30.24
Cat: 719731 Rel: 12 Sep 19
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 16 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
 1 in stock $35.37
Cat: 719722 Rel: 02 Sep 19
 
Blank module for AE modular - 1U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
Read more
 2 in stock $3.23
Cat: 719725 Rel: 02 Sep 19
 
Blank module for AE modular - 2U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
Read more
 2 in stock $3.78
Cat: 719726 Rel: 02 Sep 19
 
Blank module for AE modular - 4U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
Read more
 1 in stock $4.86
Cat: 719721 Rel: 02 Sep 19
 
Pack of 6 patch wires
Notes: A set of 6 blue patchwires for AE modular; with a length of 17cm. The cable has a soft, flexible silicone insulation, with a gold plated pin.
Read more
 3 in stock $5.39
Cat: 719707 Rel: 02 Sep 19
 
Pack of 6 patch wires
Notes: A set of 6 green patchwires for AE modular; with a length of 55cm. The cable has a soft, flexible silicone insulation, with a gold plated pin.
Read more
 5 in stock $7.30
Cat: 719705 Rel: 02 Sep 19
 
Pack of 6 patch wires
Notes: A set of 6 grey patchwires for AE modular; with a length of 25cm. The cable has a soft, flexible silicone insulation, with a gold plated pin.
Read more
 More than 10 in stock $5.94
Cat: 719706 Rel: 02 Sep 19
 
Pack of 6 patch wires
Notes: A set of 6 red patchwires for AE modular; with a length of 40cm. The cable has a soft, flexible silicone insulation, with a gold plated pin.
Read more
 6 in stock $6.21
Cat: 719704 Rel: 02 Sep 19
 
Pack of 6 patch wires
Notes: A set of 6 yellow patchwires for AE modular; with a length of 10cm. The cable has a soft, flexible silicone insulation, with a gold plated pin.
Read more
 7 in stock $4.32
Cat: 719727 Rel: 03 Sep 19
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 8 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
 2 in stock $24.85
Items 1 to 50 of 53 on page 1 of 2
1  2  »

Filter

Synth module accessories
Equipment
Release Date
Featured
Close