100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Tangible Waves

Home  Labels  

Tangible Waves

Options
Items 1 to 46 of 46 on page 1 of 1
FORTHCOMING
Tangible Waves AE Modular 1-Row 12x1 Narrow Case
Cat: 786529 Rel: 31 Oct 20
 
1-row 12x1 narrow case
Notes: This 1-row rack for AE modular is 12 units wide; two of them are used by the MASTER module so you have 14U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

If you want your rack pre-installed by us, please add the mounting service to your order (module mounting (up to 16 modules) ).

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions:31.1 x 11.2 x 4.5 cm (width x depth x height)
Read more
MRP:$32.73 SAVE 17%
coming soon $27.27
FORTHCOMING
Tangible Waves AE Modular 1-Row 16x1 Standard Case
Cat: 786523 Rel: 31 Oct 20
MRP:$36.65 SAVE 17%
coming soon $30.54
FORTHCOMING
Tangible Waves AE Modular 1-Row 20x1 Wide Case
Cat: 786525 Rel: 31 Oct 20
MRP:$43.20 SAVE 17%
coming soon $35.99
Tangible Waves AE Modular 12U Eurorack Adapter Frame
Cat: 719730 Rel: 03 Sep 19
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 12 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
$30.54 SAVE 20%
 2 in stock $24.44
Tangible Waves AE Modular 16U Eurorack Adapter Frame
Cat: 719731 Rel: 12 Sep 19
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 16 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
$35.73 SAVE 20%
 1 in stock $28.58
Tangible Waves AE Modular 2 Row Rack Empty Case
Cat: 719709 Rel: 02 Sep 19
 
Empty rack for AE modular, 2 x 16U
Notes: The 2-row rack for AE modular is 16 units wide with 2 rows; the MASTER module consumes 2 units so you have 30U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions: 41.3 x 21.7 x 4.5 cm (width x depth x height)
Read more
 1 in stock $41.46
Click for better price!
or call +44 20 7424 1960
quote 719709
FORTHCOMING
Tangible Waves AE Modular 2-Row 12x2 Narrow Case
Cat: 786519 Rel: 31 Oct 20
MRP:$41.89 SAVE 17%
coming soon $34.90
FORTHCOMING
Tangible Waves AE Modular 2-Row 16x2 Standard Case
Cat: 786514 Rel: 31 Oct 20
 
2-row 16x2 wide case
Notes: The 2-row rack for AE modular is 16 units wide with 2 rows; the MASTER module consumes 2 units so you have 30U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

If you want your rack pre-installed by us, please add the mounting service to your order (module mounting (up to 32 modules) or module mounting (up to 16 modules) )

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions: 41.3 x 21.7 x 4.5 cm (width x depth x height)
Read more
MRP:$49.75 SAVE 17%
coming soon $41.45
FORTHCOMING
Tangible Waves AE Modular 2-Row 20x2 Wide Case
Cat: 786515 Rel: 31 Oct 20
 
2-row 20x2 wide case
Notes: The 2-row rack for AE modular is 20 units wide with 2 rows; the MASTER module consumes 2 units so you have 38U remaining for other modules.

Via a joint kit (not included) another case of this width (either one-row or two-row) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

If you want your rack pre-installed by us, please add the mounting service to your order (module mounting (up to 32 modules) or module mounting (up to 16 modules) )

The sides are made of red acrylic, all other parts are of wood fibre board (MDF), black painted.

Dimensions: 51.5 x 21.7 x 4.5 cm (width x depth x height)
Read more
MRP:$57.60 SAVE 17%
coming soon $47.99
FORTHCOMING
Tangible Waves AE Modular 2CVTOOL CV Dual Attenuverter Module
Cat: 786470 Rel: 31 Oct 20
 
Dual attenuverter module
Notes: A dual attenuverter for CVs.

The 2CVTOOL offers two units for offset and -/+ attenuation for CV signals, also known as "attenuverter". This can be useful for shaping and tuning all kinds of modulation signals.

The inputs goes to the level knob, where the center position means a level of zero. Turning the level knob to the right increases the level of the input signal; turning it to the left, the level is also increased, but inverted. E.g. when feeding a sawtooth signal to the input, you can get either a rising or falling signal at the output. With the offset knob, the total level can be shifted up or down, with the clipping at the upper and lower ends an additional modfication of the signal is possible.

The 2CVTOOL offers two units for offset and -/+ attenuation for CV signals, also known as "attenuverter". This can be useful for all kinds of modulation purposes.

Module power consumption: 2 mA

Inputs
IN 1 - accept any CV or audio signal
IN 2 - accept any CV or audio signal
Outputs
Bus CV - CV signal from MIDI
Bus CTRL - CTRL signal from MIDI
OUT 1 (x2) - attenuated signal from IN1
OUT 2 (x2) - attenuated signal from IN2
MULT - passive multiple, not connected to the module's circuitry
Controls
OFFSET 1 - Potentiometer to dial in the offset voltage for channel 1. This will be added to the incoming CV.
LEVEL 1 - Potentiometer to select the attenuation. This is a bipolar control in that it can reduce the incoming voltage or increase it.
OFFSET 2 - Potentiometer to dial in the offset voltage for channel 2. This will be added to the incoming CV.
LEVEL 2 - Potentiometer to select the attenuation. This is a bipolar control in that it can reduce the incoming voltage or increase it.
Read more
MRP:$40.58 SAVE 17%
coming soon $33.81
Tangible Waves AE Modular 2ENV Dual Attack & Decay Envelope Module
Cat: 719670 Rel: 02 Sep 19
 
Dual attack/decay envelope
Notes: 2ENV is a dual attack - decay envelope; it can be switched between full sustain (the output remains at full level as long as the GATE input is on) and zero sustain (for percussive envelopes). Another switch (SLOW/FAST) allows selecting the time range.

For manual triggering there is a button for each envelope.

CV control: Both attack and decay time can be CV controlled; the CV "multiplies" the time by 1...approx. 8 times.
Read more
 3 in stock $42.55
Click for better price!
or call +44 20 7424 1960
quote 719670
Tangible Waves AE Modular 2LFO Dual Low Frequency Oscillator Module
Cat: 777169 Rel: 15 May 20
 
LFO module
Notes: A dual LFO with different waveforms and triangle-sawtooth blending.
The 2LFO module has two LFO units with different features and generates modulation voltages mostly below the audio range. This module offers

RATE knobs for controlling the frequency
SLOW / FAST switch for two frequency ranges; with FAST the rate can go into the lower audio range
SHAPE knob for the first LFO, blends from rising sawtooth to triangle to falling sawtooth
Triangle / Sawtooth switch for the second LFO; changes the waveform of the output
PULSEWIDTH knob for the second LFO, this sets the pulsewidth of the according output
control LEDs for the output waveforms
PWM input for modulation of the squarewave pulsewidth of the second LFO
Read more
MRP:$44.51 SAVE 18%
 2 in stock $36.55
Tangible Waves AE Modular 2U Blank Module
Cat: 719725 Rel: 02 Sep 19
 
Blank module for AE modular - 2U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
Read more
 1 in stock $3.82
Tangible Waves AE Modular 4ATTMIX Mixer & Quadattenuator Module
Cat: 719689 Rel: 02 Sep 19
 
Versatile mixer/quadattenuator
Notes: 4ATTMIX offers four input channels which can be level controlled / attenuated by the corresponding knobs. The attenuated signals are sent to four outputs.

Additionally, each channel can be sent to an internal mixer by the switches beside the knobs. The mix signal is then sent to the mix output.

An additional switch selects the general operation mode for the mixer, for DC/CV signals or for audio signals.
Read more
 3 in stock $34.64
FORTHCOMING
Tangible Waves AE Modular 4BUFFER Buffered & Switchable Multiples Module
Cat: 786473 Rel: 31 Oct 20
 
Buffered & switchable multiples module
Notes: Buffered, switchable multiples for precise CV signals

The 4BUFFER module is a buffered multiple of 1 in to 2 out, with the option to chain the channels together to create a total of 8 outputs for one input or other combinations. Buffered multiples have the advantage over the normal passive mults in that there are no voltage drops across the signal path. As the AE system matures into more precision regarding oscillator tracking etc. this is a helpful utility for various situations.

Module power consumption: 1 mA
Read more
MRP:$27.49 SAVE 17%
coming soon $22.90
Tangible Waves AE Modular 6 x Patch Cables (green, 55cm)
Cat: 719707 Rel: 02 Sep 19
 
Pack of 6 patch wires
Notes: A set of 6 green patchwires for AE modular; with a length of 55cm. The cable has a soft, flexible silicone insulation, with a gold plated pin.
Read more
 5 in stock $7.37
Tangible Waves AE Modular 6 x Patchwires (grey, 25cm)
Cat: 719705 Rel: 02 Sep 19
 
Pack of 6 patch wires
Notes: A set of 6 grey patchwires for AE modular; with a length of 25cm. The cable has a soft, flexible silicone insulation, with a gold plated pin.
Read more
 5 in stock $6.00
Tangible Waves AE Modular 6 x Patchwires (red, 40cm)
Cat: 719706 Rel: 02 Sep 19
 
Pack of 6 patch wires
Notes: A set of 6 red patchwires for AE modular; with a length of 40cm. The cable has a soft, flexible silicone insulation, with a gold plated pin.
Read more
 8 in stock $6.27
Tangible Waves AE Modular 8U Eurorack Adapter Frame
Cat: 719727 Rel: 03 Sep 19
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 8 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
$25.10 SAVE 20%
 2 in stock $20.07
Tangible Waves AE Modular 9V Power Supply Adapter (1.3A)
Cat: 719715 Rel: 03 Sep 19
 
Power supply for AE modular
Notes: This power supply adapter is suitable for AE modular and other devices. The maximum current of 1.3A is enough to feed several AE modular racks in parallel.
Read more
 2 in stock $16.35
FORTHCOMING
Tangible Waves AE Modular ALGODRONE Bytebeat Algorithms Module
MRP:$100.80 SAVE 17%
coming soon $83.99
FORTHCOMING
Tangible Waves AE Modular Case Hinge Kit Type 1
Cat: 786535 Rel: 31 Oct 20
 
Case hinge kit
Notes: The case hinge kit allows it to join two cases at a free angle. It contains:

two joint elements
four screws
a connection cable between the cases.

This type is designed for an application where one case is flat on the surface and the other one mounted at a certain angle. The triangle shape has the advantage that the contact to the surface is exteded to the rear side so the complete unit has a stable stand.

Via the connection cable the bus and power supply is shared between both cases, so no extra power supply / second MASTER module is needed for the additional case.
Read more
MRP:$18.33 SAVE 17%
coming soon $15.26
FORTHCOMING
Tangible Waves AE Modular Case Hinge Kit Type 2
Cat: 786533 Rel: 31 Oct 20
MRP:$17.02 SAVE 17%
coming soon $14.18
FORTHCOMING
Tangible Waves AE Modular FMOS FM Synthesis Module
Cat: 786477 Rel: 31 Oct 20
 
Synthesis module
Notes: FM synthesis for the AE!

The FMOS is a new digital oscillator that brings FM synthesis to the AE modular! It offers the basic FM synthesis with one oscillator and one modulator, running both with sine waves or triangle waves. The modulation depth and frequency ratio of the modulator can be set with a knob and additionally by CV control. If you want pure sine waves, this is for you too - simply set the modulation level to 0.

The module is based on a simple 8-bit microcontroller and an adapted design of Jan Ostman.
Read more
MRP:$53.67 SAVE 17%
coming soon $44.72
Tangible Waves AE Modular Kick Analogue Drum Module
Cat: 745619 Rel: 17 Sep 19
 
Pure analogue kick drum module
Notes: KICK is a pure analogue Kick drum of raw bass power.

It has three knobs: PITCH for the overall pitch of the sound; with DECAY the length of the sound can be set and with DRIVE a nice distortion can be added to the sound.

With the pitch decay switch the pitch follows the amplitude, giving a bit different character.

And a trigger button is available to check the sound without an external trigger signal.
Read more
 2 in stock $35.45
Tangible Waves AE Modular Master I/O Module
Cat: 719648 Rel: 02 Sep 19
 
Master I/O module
Notes: The MASTER module is the base of every AE modular system - it contains;

- The voltage regulation (5V) for the power supply of the modules
- MIDI input (minijack; Breakout cable to DIN-5 socket is available separately)
- In/out-sockets (3.5mm minijack) for audio out and/or interfacing with a Eurorack system
- All bus signals (CV, GATE, CTRL, MIDI clock/start/stop) as patch sockets

The power supply is a 9V DC adapter; it can be connected either at the side or on the top of the module.
Read more
 1 in stock $53.45
Tangible Waves AE Modular MIXER 4-4 Quad Mixer Module
Cat: 719678 Rel: 02 Sep 19
 
Audio mixer with 4 inputs
Notes: This module consists of an audio mixer with 4 inputs and their level knobs, plus an additional 4 separate inputs that are mixed at full level (especially for mixing CV signals), and a separate output.
Read more
 2 in stock $26.18
Tangible Waves AE Modular MMDIVIDER Multi Mode Divider Module
Cat: 760351 Rel: 19 Dec 19
 
Multi-mode divider
Notes: A multi-mode divider for clock and audio signals.

It can be used either for dividing clock signals (e.g. from an LFO, BEATDIVIDER) for rhythmical purposes but also for audio signals - in this case you get subharmonics / lower octaves squarewaves at the outputs, which can be mixed or used separately.

The module has eight outputs which - depending on the selected division mode - provide different division factors of the input signal:

Beat: musical/rhythmical clocks are generated as 1/1, 1/2, 1/4... 1/16 and triplets
Binary: the outputs work as binary counter (same as the predecessor module DIVIDER)
Decimal: The outputs have decimal divisions of the input, meaning half, third, quarter, fifth... of the input clock
Prime: The outputs use the prime numbers as division factors
Fibonacci: The outputs use the numbers of the fibonacci row as division factors

The reset input resets all output signals; in case of audio signals this can get quite unique, ringmodulator-like sounds.

The Shift knob shifts/rotates the outputs; usually, the fastest output is on output 1, but with shift the entire output pattern is shifted so the fastest output can be set to any position 1...8.
Read more
 1 in stock $34.90
FORTHCOMING
Tangible Waves AE Modular MS20 FILTER Module
Cat: 786479 Rel: 31 Oct 20
 
Filter module
Notes: The famous MS 20 filter for AE modular!

This adaptation of the filter used first in Korg's MS-20 synth for AE modular offers control knobs for cutoff frequency, resonance and CV attenuator. Two signal inputs for different signal levels control the "drive" of the module. Compared to the wasp filter this filter has a significant self resonance and also a very quick response to changes in the cutoff frequency.

The filter type is switchable between lowpass and highpass (LP/HP switch).
Read more
MRP:$47.13 SAVE 17%
coming soon $39.26
FORTHCOMING
Tangible Waves AE Modular Narrow Bus Cable
Cat: 786537 Rel: 30 Oct 20
 
Bus cable
Notes: The Bus Cable connects the AE modular modules, it contains the power supply (GND, +5V) and CV, Gate, Controller, MIDI-clock / start / stop in a 10-pin ribbon cable. The folding pattern makes it possible to mount / unmount the module connected to the Iable.

PLEASE NOTE: This type 1 is for the NARROW racks (1-row or 2-row), for a 2-row rack you need two of this cable.
Read more
MRP:$15.71 SAVE 17%
coming soon $13.08
FORTHCOMING
Tangible Waves AE Modular OR2x4 CV Generation & Manipulation Module
Cat: 786483 Rel: 31 Oct 20
 
CV generation & manipulation module
Notes: The OR2x4 module combines 2x4 inputs by logical OR rule; the input signals are usually trigger/gate signals and are treated as digital signals.

This can be used either for "mixing" gate/trigger signals from different sources or for audio signals. too.

There are two independent units with four inputs each. With a switch all eight inputs can be linked to an 8-input OR.

With the GATE inputs the signal can be controlled further; if GATE gets a "low" signal then the output is low also. By this, the output can be synced to a common clock signal and even if one of the inputs remains high the output changes. If the GATE input remains open, the module operates as a regular OR gate.
Read more
MRP:$31.42 SAVE 17%
coming soon $26.17
FORTHCOMING
Tangible Waves AE Modular Patchwires Starter Set (6x10cm, 6x17cm, 6x25cm, 6x40cm)
Cat: 786510 Rel: 31 Oct 20
 
Patchwires starter set
Notes: A set of Patchwires for AE modular with different lengths (10, 17, 25, 40 cm), 6 pieces of each length.

Cable has a soft, flexible silicone insulation, with a gold plated pin.
Read more
MRP:$20.95 SAVE 17%
coming soon $17.45
FORTHCOMING
Tangible Waves AE Modular POLAMIX 3 Channel Attenuverter & Mixer Module
Cat: 786486 Rel: 31 Oct 20
 
Attenuverter/mixer module
Notes: POLAMIX - a 3-channel atenuverter/mixer

The POLAMIX is similar to the 2CVTOOL in that you can offset and -/+ attenuate CV signals, but it also acts as a 3 channel mixer. Try to use this with 3 LFOs for modulation mayhem!

The three inputs are routed to corresponding knobs, where the center position means a level of zero. Turning the level knob to the right increases the level of the input signal; turning it to the left, the level is also increased, but inverted. E.G. when feeding a sawtooth signal to the input, you can get either a rising or falling signal at the output. And this for each of the three inputs. Finally, with the offset knob, the total level can be shifted up or down.

Read more
MRP:$40.58 SAVE 17%
coming soon $33.71
Tangible Waves AE Modular Power Splitter Cable
Cat: 719717 Rel: 02 Sep 19
 
Power splitter cable for AE modular
Notes: The Power Splitter Cable allows it to power up to four devices with one Power supply adapter. The PSU you find here has enough capacity to run up to four AE modular racks (or other devices with 9V supply voltage). Please make sure the total current consumption is below 1.3 amperes!

Recommended if you use extender cables, as the four cables of this splitter are only 20cm in length each.
Read more
 1 in stock $4.36
FORTHCOMING
Tangible Waves AE Modular QUANTIZER Automatic Musical Scales Module
Cat: 786489 Rel: 31 Oct 20
 
Quantizer module
Notes: The QUANTIZER takes four different CV inputs and processes them in a way that the CV values "snap" to the exact values so that oscillators controlled by the outputs of the module play the notes of a selected musical scale. With an encoder one of 16 scales can be selected and is displayed in a text display,

There are 4 independent channels that are quantized to the same selected scale.

As an additional feature, the module provides a trigger signal for each channel on every change on the output CV.

Finally, with a switch the scale selection can be "frozen" so there is no accidental change possible.

There are 4 independent channels that are quantized to the same selected scale.

Module power consumption: 15 mA

Inputs
CV 1 - accept CV for channel 1 of the quantizer
CV 2 - accept CV for channel 2 of the quantizer
CV 3 - accept CV for channel 3 of the quantizer
CV 4 - accept CV for channel 4 of the quantizer
Outputs
CV 1 - Quantized CV from channel 1 of the quantizer
CV 2 - Quantized CV from channel 2 of the quantizer
CV 3 - Quantized CV from channel 3 of the quantizer
CV 4 - Quantized CV from channel 4 of the quantizer
TRIG 1 - Gate signal on change of CV from channel 1 of the quantizer
TRIG 2 - Gate signal on change of CV from channel 2 of the quantizer
TRIG 3 - Gate signal on change of CV from channel 3 of the quantizer
TRIG 4 - Gate signal on change of CV from channel 4 of the quantizer
MULT - unbuffered multiple, unconnected from the module's circuitry
B. CV - CV signal from MIDI
Please note:

The notation of the outputs is slightly different on the panel than indicated here. There are two rows of identical outputs, side by side. For each output-trigger there is an activity LED, indicating a change in quantized CV.

Controls
SCALE Knob - selects the current scale. 16 scales are available, the selected scale will be displayed in the small display to the right of this knob
LOCK Switch - prevents accidental changes of the selected scale when activated
OFFSET Knob - Select from up to 12 notes from the well-tempered scale as base-value, depending on the scale selected. All left would be equivalent to a key of C
Please note:

Scale selection directly takes place when the SCALE Knob is turned, clicking it has no specific effect.

Available SCALES, as indicated on the display, are as follows:

Minor (e.g. equivalent to A-B-C-D-E-F-G in ‘A minor’)
Major (e.g. equivalent to C-D-E-F-G-A-B in ‘C major’)
Dorian (e.g. equivalent to C-D-Eb-F-G-A-Bb in ‘C Dorian mode’)
Phrygian (e.g. equivalent to C-Db-Eb-F-G-Ab-Bb in ‘C Phrygian mode’)
Lydian (e.g. equivalent to C-D-E-F#-G-A-B in ‘C Lydian mode’ )
Mixolyd [Mixolydian] (e.g. equivalent to C-D-E-F-G-A-Bb in ‘C Mixolydian mode’ )
Locrian (e.g. equivalent to C-Db-Eb-F-Gb-Ab-Bb in ‘C Locrian mode’)
Gypsy (e.g. equivalent to C-D-Eb-F#-G-Ab-B in ‘C Hungarian minor scale’ )
Whole (equivalent to C-D-E-F#-G#-A# or B-Db-Eb-F-G-A as ‘Whole tone scales’)
Pent Min [Pentatonic Minor] (e.g. equivalent to C-Eb-F-G-Bb in ‘C Minor pentatonic’)
Pent Maj [Pentatonic Major] (e.g. equivalent to C-D-E-G-A in ‘C Major pentatonic’)
1-3-5 (e.g. equivalent to C-E-G in ‘C’)
1-3-4 (e.g. equivalent to C-E-F in ‘C’)
Fifth (e.g. equivalent to C-G in ‘C’)
Octave (e.g. equivalent to C in ‘C’)
Chromat (The 12 welltempered notes of the chromatic scale)
Read more
MRP:$77.24 SAVE 17%
coming soon $64.36
FORTHCOMING
Tangible Waves AE Modular SAWVOX Synthvoice Module
Cat: 786493 Rel: 31 Oct 20
 
Synthvoice module
Notes: A complete basic synthvoice in nasty 8-bit!

The SAWVOX module is a complete synth voice with two sawtooth oscillators, a filter and a VCA, all realized digitally with a tiny 8-bit microcontroller. The oscillators are detuned by a fixed rate to get a fatter sound, and can be switched to a single oscillator. Of course, due to the limited resources of the processor, the sound has the typical 8-bit lofi char, but the CV tracking is quite fine, and it can find its place in a lot of patches. All parameters can be CV controlled, eg. filter frequency and resonance.

The module is based on a simple 8-bit microcontroller and an adapted design of Jan Ostman.
Read more
MRP:$53.67 SAVE 17%
coming soon $44.72
FORTHCOMING
Tangible Waves AE Modular SEQ8 Analogue 8-Step CV Sequencer Module
Cat: 786498 Rel: 31 Oct 20
 
8-step CV sequencer module
Notes: An analog 8-step CV sequencer.

The SEQ8 is an 8-step sequencer for controlling oscillator pitch and triggering envelopes.

Compared to "classic" analog sequencers it works a bit different: Instead of setting the CV for each step independently (which means in fact "tuning" each step which can be a bit tedious), the SEQ8 has 4 knobs for presetting different CV's (= notes); each of the 8 step knobs selects one of these CVs, plus 0V (=base note) plus Pause (no trigger output). So some CVs have to be fine-tuned once; with the step knobs you can focus entirely on the sequence itself and you can even modify it on the fly, still remaining in tune.

Additionally to the selected CV presets, the "raw" value of the step knobs is also accessible at an extra output.

Module power consumption: 7 mA
Read more
MRP:$62.84 SAVE 17%
coming soon $52.35
FORTHCOMING
Tangible Waves AE Modular SLEW/EDGE CV Slew Limiter & Edge Detector Module
Cat: 786504 Rel: 31 Oct 20
 
VC slew limiter & edge detector module
Notes: A slew limiter / edge detector for CV's.

The SLEW/EDGE module has two purposes:

First, it is a slew limiter, changes in the incoming CV are softened with a variable slew time. If the CV is used e.g. for controlling an oscillator, you get a portamento. With two switches it can be controlled if only rising or falling CVs or CV change in both directions are processed with the slew time. Additionally, the choice if rising and/or falling CVs are "slewed" can be controlled with external gate signals.

The second purpose of the module is an edge detector that indicates if the incoming CV is rising or falling; this information is available as different outputs (one that is high on rising and low on falling input, and short pulses on rise / fall / any change.

The SLEW/EDGE module combines the function of a slew limiter for CVs and a CV change detector in one module. The slew operation can be activated individually for rising and/or falling CVs, either by switches or controlled by external gate signals. The edge detection generates various gate / trigger output signals depending on rising or falling of the input CV.

Module power consumption: 5 mA

The second purpose of the module is an edge detector that indicates if the incoming CV is rising or falling; this information is available as different outputs (one that is high on rising and low on falling input, and short pulses on rise / fall / any change.

The Slew detector can be useful if using the S&H module for modulation; rather than jumps it will smooth the changes between the different levels, particularly good on filter modulation, unless you want the sudden changes.
Read more
MRP:$37.96 SAVE 17%
coming soon $31.63
FORTHCOMING
Tangible Waves AE Modular SOLINA String Machine Emulation Module
Cat: 786501 Rel: 31 Oct 20
 
String machine emulation module
Notes: SOLINA, an emulation of the 70ies string machines!

The SOLINA module is based on th excellen work of Jan Ostman, who has developed a very good digital based emuation of the sound of the string synths that were popular in the music of the 70ies and 80ies, like ARP Solina (who gave this module it's name), Logan String and others.

Their unique sound is based on several, minor detuned sawtooth oscillators and an ensemble effect.

This module produces chords, which can be shaped in different ways, like selecting the base scale (minor, major), adding the 7th or a bass note and different variations of the chord. The sound can be shaped with a variable oscilator spread/detune, adding a phaser/ensemble and a tone knob for choosing the overall character between bass focused to only higher parts of the sound.
Read more
MRP:$94.26 SAVE 17%
coming soon $78.53
FORTHCOMING
Tangible Waves AE Modular Standard Bus Cable
Cat: 786536 Rel: 31 Oct 20
MRP:$18.33 SAVE 17%
coming soon $15.26
Tangible Waves AE Modular Starter Rack 1 Complete Modular Synthesiser System
Cat: 719645 Rel: 18 Jul 19
 
Modular synthesiser starter rack
Notes: A complete AE modular system in a one-row Rack; containing the following modules:

- MASTER
- 2 OSC/D
- VCO
- NOISE
- LFO
- SVFILTER
- ENV
- 2VCA
- 2ATT/CV
- MIXER
- SAMPLE&HOLD
- DELAY

The case is extendable; via a joint kit (not included) another case of this width can be attached at a free angle; the bus is connected via a short connector cable between both cases.

It is shipped complete with power supply unit, MIDI breakout cable, a bunch of patch wires of every type and a quick start guide.
Read more
 1 in stock $375.27
Click for better price!
or call +44 20 7424 1960
quote 719645
Tangible Waves AE Modular Starter Rack 2 Complete Modular Synthesiser System (B-STOCK)
Cat: 784595 Rel: 10 Jun 19
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Complete starter setup of Tangible's AE system, designed as an affordable way into Eurorack modular. Everything you need to get started, including oscillators, filters and much more.

Supplier's notes:
A complete AE modular system in a two-row Rack (32 AE module units in complete); containing the following modules:

- MASTER
- 2OSC/D
- VCO
- NOISE
- 2 x LFO
- FILTER (Wasp type)
- SVFILTER
- 2ENV
- 2VCA
- LOGIC
- SAMPLE&HOLD
- BEATDIVIDER
- TRIQ164
- 2ATT/CV
- MIXER
- DELAY

The case is extendable; via a joint kit (not included) another case of this type can be attached at a free angle; the bus is connected via a short connector cable.

It is shipped complete with power supply unit, MIDI breakout cable, a bunch of patch wires of every type and a quick start guide.
Read more
 1 in stock $526.57
Tangible Waves AE Modular Starter Rack 2 Complete Modular Synthesiser System (B-STOCK)
Cat: 784816 Rel: 10 Jun 19
 
B-STOCK: Slight surface marks
Notes: ***B-STOCK: Slight surface marks ***


Complete starter setup of Tangible's AE system, designed as an affordable way into Eurorack modular. Everything you need to get started, including oscillators, filters and much more.

Supplier's notes:
A complete AE modular system in a two-row Rack (32 AE module units in complete); containing the following modules:

- MASTER
- 2OSC/D
- VCO
- NOISE
- 2 x LFO
- FILTER (Wasp type)
- SVFILTER
- 2ENV
- 2VCA
- LOGIC
- SAMPLE&HOLD
- BEATDIVIDER
- TRIQ164
- 2ATT/CV
- MIXER
- DELAY

The case is extendable; via a joint kit (not included) another case of this type can be attached at a free angle; the bus is connected via a short connector cable.

It is shipped complete with power supply unit, MIDI breakout cable, a bunch of patch wires of every type and a quick start guide.
Read more
 1 in stock $555.45
Tangible Waves AE Modular Topograf 3 Track Drum Sequencer Module
Cat: 745618 Rel: 17 Sep 19
 
Topographic drum sequencer
Notes: TOPOGRAF is a drum sequencer with three tracks, that works with a "topographic" principle; it contains a number of drum patterns arranged in a "virtual map"; and with two knobs MAP X and MAP Y you can set a position in this map. With one knob per channel the density is defined; and a CHAOS knob brings some randomness into the whole process. All in all, a few knobs for a lot of drum patterns you probably wouldn't make this way by yourself - a nice source of inspiration and also great for playing live.

TOPOGRAF is the AE modular version of the Grids module by Mutable Instruments. It is 100% identical to Grids.
Read more
 7 in stock $75.26
Click for better price!
or call +44 20 7424 1960
quote 745618
Tangible Waves AE Modular USBPOWER Triple USB Power Output Socket Module
Cat: 719700 Rel: 02 Sep 19
 
Three USB power output sockets
Notes: Each of the three USB-A sockets on the USBPOWER module can be used to charge your mobile phone, connect a USB lamp or supply power to any other USB device. Furthermore, the output socket provides +5V and ground to supply e.g. DIY circuits on a breadboard.

Please note: This is only a power source via USB sockets; no USB data communication is possible here.

Includes additional USB lamp!
Read more
 1 in stock $21.55
FORTHCOMING
Tangible Waves AE Modular Wide Bus Cable
Cat: 786538 Rel: 31 Oct 20
 
Bus cable
Notes: The Bus Cable connects the AE modular modules, it contains the power supply (GND, +5V) and CV, Gate, Controller, MIDI-clock / start / stop in a 10-pin ribbon cable. The folding pattern makes it possible to mount / unmount the module connected to the Iable.

PLEASE NOTE: This type 1 is for the WIDEracks (1-row or 2-row), for a 2-row rack you need also two of this cables.
Read more
MRP:$22.25 SAVE 17%
coming soon $18.54
Items 1 to 46 of 46 on page 1 of 1

Filter

Tangible Waves
Release Date
Featured
Close