Studio Equipment charts

Notes: The tools we use to compose and produce music are dear to our hearts. Dust, liquid and accidental impact have taken many a good FX unit down over the years - this is where Decksaver steps in. Precision trimmed for perfect fit whilst accommodating cables, your Bim/Bam/Boum can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage.

Notes: The tools we use to compose and produce music are dear to our hearts.

Boutique synthesizer brand Dreadbox are racking up an awesome range of electronic gear.

Dust, liquid and accidental impact have taken many a good unit down over the years - this is where Decksaver steps in.

Precision trimmed for perfect fit whilst accommodating cables, your Typhon can sit ready for operation.

Slides straight into a flight or soft case for maximum protection during transportation.

Shields delicate controls and internal components from damage at home, on the road and onstage.

Dimensions

Weight: 0.425kg
Length: 23.4cm
Width: 13.4cm
Height: 3.4cm

Notes: Protect tomorrow's future classics, today!

The ISLA Instruments S2400 is a 21st Century homage to one of the electronic music world's most iconic drum samplers - the SP1200.

Dust, liquid and accidental impact have taken many a good analogue drum machine down over the years - and this is where Decksaver steps in.

Designed to mould perfectly around the outer case of the unit and precision trimmed for a superb finish, whilst accommodating cables at the rear, the S2400 can sit ready for operation.

Slides straight into a flight or soft case for maximum protection during transportation.

Shields delicate faders, knobs and internal components from damage at home, in the studio, or on the move.

Dimensions:

Weight: 0.8kg
Length: 45cm
Width: 30cm
Height: 4.7cm

Notes: Since its beginning, Behringer has entered the music equipment world with a bang, constantly releasing desirable and value-led gear across the music spectrum such as DJ mixers, synthesisers, drum machines and interfaces - the list goes on.

Close to the top of Decksaver's customer request list, the X-Touch is a universal remote control for DAWs, which allows you to control and fine-tune any track or recording through the use of its 9 fully automated and touch-sensitive 100mm motorized faders.

While the X-Touch might be the perfect controller for your Ableton, Logic or the like, it doesn't have the perfect protection against damage and any other bad mishaps.

To fix this problem Decksaver have carefully crafted and manufactured right here in the UK, a cover to protect the Behringer X-Touch. This super durable polycarbonate lid features extreme durability and offers the highest degree of protection against spills, dust and accidental impact.

Weight: 1.1kg
Length: 45.4cm
Width: 31cm
Height: 4.4cm

Material: Smoked clear polycarbonate

Notes: You could consider Teenage Engineering the 'Apple' of music products and it's clear to see why with the TX-6. The beauty in its design and the UX interface is astonishing for something that is so compact.

But although the TX-6 is an ultra-portable device, it still packs a heavy-weight punch sonically with its battery-powered mixer and multi-channel audio interface and controls. Perfect for the on-the-go producer.

Custom-moulded in the UK, this cover is designed to fit the sleek contours of the TX-6.

Designed for the digital DJ or producer, this super-durable polycarbonate shell offers a high level of protection and slides straight into protective cases or pouches, making it ideal for traveling.

The cover shields delicate faders, screen and knobs from the ingress of dust, liquids and accidental impact whilst still accommodating all cables.

At home, on the road or in the studio, Decksaver has your Teenage Engineering TX-6 covered.

Weight: 0.176 kg
Length: 6.7 cm
Width: 9.7 cm
Height: 2.8 cm

Material: Smoked clear polycarbonate.

Notes: The tools we use to compose and produce music are dear to our hearts. Dust, liquid and accidental impact have taken many a good groovebox down over the years - this is where Decksaver steps in. Precision trimmed for perfect fit whilst accommodating cables, the MC-101 can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.

Notes: Hailing from Japan, Roland has been a giant in the music equipment industry and have lways been the trailblazer since 1972 when they first arrived on the music scene.

After a full decade and a half since the original SP-404, Roland released their SP-404 MK2. The MK2 is an evolution of the classic SP-404 that has been a staple in the music production world. It's not quite an all-new model but definitely not just a refresh.

Decksaver knew with the new portable capabilities of the MK2 with its USB port powered features, or AA battery use, it will be used not just at home, but wherever you go. For this reason, Decksaver have designed and custom-moulded a protective cover right here in the UK.

This super durable polycarbonate shell features extreme durability and offers the highest degree of protection. Not only that, but with the slim form-fit, they fit easily into a gig bag or other ancillary equipment case.

No matter where you are, Decksaver has your SP-404 MK2 covered.

Weight: 0.7kg
Length: 17.8cm
Width: 28.1cm
Height: 3.7cm

Material: Smoked clear polycarbonate.

Notes: Transparent protection for your gear. The Decksaver Behringer TD-3 Cover is a highly-durable protective cover constructed from a polycarbonate shell for optimal protection. The cover is custom moulded to fit the shape of the Behringer TD-3 and is finished with a high-quality smoke/clear sheen.

The cover is ideal for travelling, helping to protect your TD-3 from superficial damage. The cover protects from dust, liquid and accidental impact damage, whilst accommodating cables.

Please note: The Behringer TD-3 is not included in this purchase. It is shown for demonstration purposes only.

Dimensions (LxWxH): 31 x 16.6 x 3.7 cm
Weight: 0.27 kg

Notes: Units like the Akai MPC Live 2 sequencer are music-production powerhouses - they are the fulcrum of your setup and cannot go unprotected.

Our super durable polycarbonate shell offers protection from dust, spillages and accidental impact.

Each Decksaver is trimmed precisely to fit, leaving cables in place. Slides straight into a flight case or controller bag, perfect for transportation.

Shields delicate controls and internal components from damage on the road, at home or in the club.

Key features:

Patented smoked/clear transparency, unique to Decksaver.
Protects against dust, liquid and impacts.
Shields vulnerable faders, pads and knobs during transportation.
Low profile design enables compatibility with most flight cases and travel bags.

Fits:

MPC Live II Beatclub Edition
MPC Live II Timbaland Edition

Dimensions:

Weight 0.850kgs
Length 41.60cm
Width 24.80cm
Height 3.00cm

Notes: Custom engineered in the UK for the Empress Effects Zoia Effects Pedal, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.

Notes: Sometimes a synth comes along which changes your whole approach to making music - these amazing machines must be protected! Dust, liquid and accidental impact have taken many a good analogue synthesizer down over the years - this is where Decksaver steps in. Precision trimmed for a perfect fit whilst accommodating cables, the Subsequent 25/Sub Phatty can sit ready for operation. This case slides straight into a flight or soft case for maximum protection during transportation, and it also shields delicate controls and internal components from damage at home, in the studio and onstage. Decksaver's Subsequent 25/Sub Phatty cover features Soft-Fit technology, providing extra protection to vulnerable wooden cheek panels that often adorn synthesizers.

Length: 52.4cm
Width: 32.3cm
Height: 6.7cm
Material: Smoked polycarbonate

Notes: Fits Roland Boutique D-05, TR-08, SH-01A, SE-02, TR-09, TB-03, VP-03, A-01, JP-08, JU-06 & JX-03.

The tools we use to compose and produce music are dear to our hearts. The studio elements of dust, smoke and liquid have taken many a good synth down over the years. This is where Decksaver steps in. Precision trimmed for a perfect fit whilst accommodating cables, your Boutique can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.

Please note this cover is compatible with the VP-03 but obstructs the XLR microphone input.

Notes: The tools we use to compose and produce music are dear to our hearts. Dust, liquid and accidental impact have taken many a good synth down over the years - this is where Decksaver steps in. Precision trimmed for perfect fit whilst accommodating cables, the TipTop Audio Mantis Case can sit ready for operation. This cover is designed with 55mm clearance for patch cables, meaning you can leave your cables in place when travelling or protecting your modular setup in the studio. Shields delicate controls and internal components from damage at home, on the road and on stage.

Notes: The tools we use to compose and produce music are dear to our hearts. The studio elements of dust, smoke and liquid have taken many a good analogue synth down over the years. This is where Decksaver steps in.

Precision trimmed for a perfect fit whilst accommodating cables, the Minilogue can sit ready for operation.

Slides straight into a flight or soft case for maximum protection during transportation.

Shields delicate controls and internal components from damage at home, on the road and on stage.

*Photographed Korg Minilogue keyboard is not included

Notes: The Yamaha Seqtrak, a pioneering instrument in the realm of music composition and performance, has swiftly become an almost indispensable resource for artists and producers worldwide.

Acknowledging its pivotal role and the strong demand for reliable protection, Decksaver are delighted to present this cover, specially tailored for the Yamaha Seqtrak. This cover is meticulously fashioned from superior materials, offering precision-engineered defence against dust, spills, and unexpected impacts, thus ensuring the longevity of your device and preserving its pristine condition.

This Decksaver cover is custom-made to match the unique shape of the Seqtrak perfectly, ensuring a tight fit that encompasses all critical parts, including buttons, sliders, screens, and ports. Its robust design provides substantial protection while still permitting unobstructed access to all the device's functions and connections.

This feature is vital for seamless integration into your workflow, whether you're in the studio, on stage, or storing the device. This cover serves as a dependable guardian, keeping your Seqtrak ready for any creative endeavour you embark on.

Opting for this Decksaver cover for your Yamaha Seqtrak is more than just choosing protection; it represents a commitment to preserving the instrument's longevity and operational integrity. Held in high regard by musicians and producers, this cover is an essential ally for anyone committed to protecting the integrity and efficiency of their Seqtrak. It enables users to pursue their artistic ambitions with increased confidence and peace of mind, assured that their equipment is thoroughly safeguarded.

Weight: 0.14 kg
Length: 35 cm
Width: 10 cm
Height: 2.9 cm

Material: Smoked clear polycarbonate.

Notes: Enhance the resilience and sophistication of your Teenage Engineering EP-133 K.O.II with our tailor-made Decksaver protective cover. Recognising that your K.O.II is more than merely a device, but an integral part of your musical voyage, it warrants the utmost in care and protection. The Decksaver cover is poised to provide precisely that, serving as a formidable protector against external hazards.

This bespoke-engineered cover is designed specifically to match the contours of your EP-133, preserving its stylish, slender profile whilst offering unparalleled protection. Crafted from high-grade polycarbonate, it establishes a strong defence against dust, liquid spills, and unexpected impacts. With this cover, you're free to delve into your musical explorations, devoid of concerns over the common perils that might harm your valued instrument.

The Decksaver cover delivers total protection for every control and feature of your EP-133. Whether you're producing beats in the studio, performing live, or concocting sounds on the go, this cover is your indispensable shield against abrasions, bumps, and contamination. Embrace the liberty of creativity, reassured by the knowledge that your instrument is securely guarded by the Decksaver armour.

Beyond its protective qualities, the Decksaver cover also shines in terms of convenience. Its transparent design allows you to showcase your K.O.II's unique aesthetic while keeping it protected. The cover supports efficient cable management, enabling you to apply or remove it with ease as needed. This obviates the need for frequent setups and disassemblies, offering immediate access to your instrument whenever inspiration strikes.

Transporting your EP-133 becomes effortless with the lightweight and compact Decksaver cover. Its slender profile means it easily slips into your backpack, gig bag, or carrying case, ensuring your instrument remains shielded from knocks, scratches, spills, and impacts during transit. With the Decksaver cover, you can confidently bring your EP-133 K.O.II to any location, secure in the knowledge that it is well-protected wherever you venture.

The Decksaver lid for the EP-133 K.O.II is more than a mere protective accessory; it signifies your dedication to your music. It offers the reassurance that your instrument is consistently safeguarded, allowing you to concentrate on broadening your musical boundaries. Let the Decksaver cover be a companion on your musical journeys, ensuring your K.O.II is always primed for the next auditory adventure.

Dimensions

Weight: 0.16 kg
Length: 18.1 cm
Width: 24.5 cm
Height: 3.3 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: The 1010music nanobox is a powerful and versatile synthesizer range that packs a serious punch in a compact package.

It's perfect for musicians and producers who need a portable, yet powerful, tool to create music on-the-go.

With its advanced sound engine and intuitive interface, the nanobox allows you to create complex sounds and sequences with ease. Whether you're a seasoned professional or a beginner, you'll find that the nanobox offers endless possibilities for sonic exploration.

To keep your device in top condition, Decksaver have created a custom Decksaver cover designed to fit the unique shape of this powerful device. Made from high-quality polycarbonate material, this Decksaver cover provides maximum protection against dust, scratches, and other harmful elements that can damage your nanobox.

Decksaver's team of experts has carefully designed and tested each Decksaver cover to ensure a perfect fit, so you can be sure that your nanobox is fully protected. With this Decksaver cover, you can take your nanobox with you wherever you go, without having to worry about damaging it.

Investing in a 1010music nanobox is an investment in your creativity, and protecting it with a Decksaver cover is the best way to ensure that it lasts for years to come.

So why wait? Protect your investment today with a custom Decksaver cover for your nanobox!

Dimensions
Weight: 0.125 kg
Length: 10 cm
Width: 8.1 cm
Height: 2.9 cm

Material: Smoked clear polycarbonate.

WARNING: When your Decksaver cover is in place, please ensure that your equipment is kept away from direct and high heat sources, such as radiators, fires and sunlight.

Notes: Units like the Akai MPC One sequencer are music-production powerhouses, they are the fulcrum of your setup and simply cannot go unprotected. This super durable polycarbonate shell offers protection from dust, spillages and accidental impact. Each Decksaver is trimmed precisely to fit, leaving cables in place. The Akai MPC One Standalone Music Production Controller Cover slides straight into a flight case or controller bag, perfect for transportation, and it also shields delicate controls and internal components from damage on the road, at home or in the club.

DIMENSIONS:

Weight: 0.76kg
Length: 28.2cm
Width: 28cm
Height: 3.9cm

Notes: Introducing the ultimate guardian for your prized Ableton Push 3 - the Decksaver cover! Unlock the full potential of your music production powerhouse while ensuring it remains in pristine condition for years to come. Crafted with meticulous precision and unrivalled expertise, our lid is designed to complement the brilliance of your Ableton Push 3.

The Ableton Push 3 is more than just a controller; it's a gateway to a world of limitless creativity. Its seamless integration with Ableton Live empowers you to bring your musical ideas to life with unparalleled ease. However, with great innovation comes the responsibility to protect your investment from the challenges of the studio and the stage.

This Decksaver cover is built to provide an impenetrable shield against dust, dirt, liquid spills, and accidental knocks. Made from premium-quality polycarbonate (to our own unique recipe), this cover ensures your Ableton Push 3 remains immaculate and free from wear and tear, so you can focus solely on the creative duties of making music.

Designed with precision, the custom-fit mould embraces your Push 3 like a second skin. Whether you're performing live, producing in the studio, or taking your music on the road, our cover ensures your creative flow remains uninterrupted.

As pioneers in protective solutions for musical gear, Decksaver takes immense pride in our stringent quality standards. The design for the Ableton Push 3 Decksaver cover has been rigorously tested to meet the highest level of fit, durability and reliability, ensuring it withstands the demands of your musical journey.

Join the league of top-tier music producers and DJs who trust Decksaver to safeguard their musical instruments. Elevate your music production experience with the confidence that your Ableton Push 3 is cocooned in some of the finest protection available.

Seize the opportunity to explore new sonic dimensions and compose your musical opus without worry. Choose Decksaver, choose excellence, and choose to take your music production to new heights with the Ableton Push 3 Decksaver cover.

Your journey to sonic greatness starts here!

Dimensions

Weight: 0.7 kg
Length: 38.8 cm
Width: 32.5 cm
Height: 4.5 cm

Material: Smoked clear polycarbonate.

Notes: Step into the world of cutting-edge synthesis with the Roland SH-4D, a modern masterpiece designed to inspire your sonic exploration.

Bursting with innovative features and top-of-the-line controls, the SH-4D empowers musicians and producers to create captivating sounds that push the boundaries of electronic music.

As you immerse yourself in the sonic wonderland of this device, it becomes essential to protect your prized synthesizer from the rigors of everyday use. To ensure your synth remains in prime condition and ready to perform at its best, Decksaver presents the Roland SH-4D Decksaver cover.

Meticulously engineered from super-tough polycarbonate, this Decksaver cover provides unbeatable protection against dust, liquid spills, and accidental impacts. Preserve the sleek aesthetics and pristine functionality of your SH-4D with ease, so you can focus on making music without worry.

The custom-moulded design of this Decksaver cover perfectly fits your Roland SH-4D, allowing for hassle-free setup and easy access to all controls and connectors. Whether you're composing in your studio, performing on stage, or collaborating with fellow musicians, your synth will remain safeguarded throughout its musical journey.

Decksaver take immense pride in the craftsmanship of this Decksaver covers, and the Roland SH-4D lid is no exception. Each cover undergoes rigorous testing to ensure it meets the highest standards of durability, ensuring a long-lasting partnership with your beloved synth.

Unite cutting-edge brilliance with unrivalled protection - choose the Roland SH-4D Decksaver cover, your companion on the journey of musical innovation. Discover new sonic horizons with confidence, thanks to Decksaver's dedication to quality and your passion for making music.

Dimensions

Weight: 0.52 kg
Length: 36.6 cm
Width: 19.6 cm
Height: 3.4 cm

Material: Smoked clear polycarbonate.

Notes: The tools we use to compose and produce music are dear to our hearts. Dust, liquid and accidental impact have taken many a good unit down over the years - this is where Decksaver steps in. Precision trimmed for perfect fit, the Solid State Logic UC1 can sit ready for operation. This case slides straight into a flight or soft case for maximum protection during transportation, and it also shields delicate controls and internal components from damage at home, on the road and onstage.

Notes: The tools we use to compose and produce music are dear to our hearts.

Dust, liquid and accidental impact have taken many a good modular synth down over the years - this is where Decksaver steps in.

Precision designed and trimmed for a perfect fit, whilst still accommodating cables, the Eurorack Go can sit ready for operation.

This cover is designed with additional clearance for patch cables, meaning you can leave your cables in place when travelling or protecting your modular setup in the studio.

Shields delicate controls and internal components from damage at home, on the road and on stage.

Dimensions

Weight: 1.35kg
Length: 72.6cm
Width: 31.2cm
Height: 8.2cm

Notes: Conductive Labs have turned complex music theory into a killer synthesizer-jamming MIDI controller with The NDLR.

With four parts that can play up to 8 synths, it's possible to make fantastic electronic music with this device.

These tools we use to compose and produce music are dear to our hearts. Dust, liquid and accidental impact have taken many a good unit down over the years - this is where Decksaver steps in.

Designed exclusively for perfect fit, whilst still accommodating cables, your NDLR arpeggiator can sit ready for operation.

Slides straight into a flight or soft case, or rucksack for maximum protection during transportation.

Shields delicate controls, ports and internal components from damage at home, on the road and on stage.

Dimensions

Weight: 0.399kg
Length: 23.2cm
Width: 15.9cm
Height: 3.4cm

Notes: The Tascam Model 12 has been one of the most requested covers and with it's ability to seamlessly handle mixing, recording, podcasting, DAW control and interface duties, it's not hard to see why.

This professional mixer range of Decksaver covers gives audio engineers peace of mind whatever the scenario.

Designed and engineered in the UK specifically for the Tascam Model 12 mixing desk, our smoked clear Decksaver lid is manufactured from polycarbonate, a tough transparent plastic made to our own specification.

Each design is rigorously tested before it carries our name so you can rest assured.

Shields faders, buttons, knobs and lights from dust, liquid and accidental impact whilst keeping cables and settings intact.

Recommended by the industry, used by professionals.

Dimensions

Weight: 0.79kg
Length: 36.6cm
Width: 34.8cm
Height: 3.7cm

Notes: Guitar effects pedals are becoming more and more popular with DJs and producers with their ability to trigger the right noise at exactly the right time.

And whether you use Strymon pedals for processing other instruments, or even for your guitar, any unit that's regularly stomped on can suffer issues - and that's before we consider other stressors such as damage to switches or knobs during travel,or from dust, fluids or accidental impact.

These wonderful devices deserve care during downtime with the kind of protection only Decksaver covers can provide.

Precision moulded in-house to ensure a perfect fit whilst accommodating cables, your Strymon pedal can sit ready for operation.

Shields delicate controls and internal components from damage at home, on the road and in the studio.

Fits the NightSky and Volante pedals.

Dimensions

Weight: 0.235kg
Length: 18.1cm
Width: 11.8cm
Height: 3cm

Fits

Strymon NightSky
Strymon Volante

Notes: Guitar effects pedals are becoming more and more popular with DJs and producers with their ability to trigger the right noise at exactly the right time.

And if you're a guitarist with a taste for effects pedals, chances are you own or have played with or used a legendary Boss Stompbox at some point.

These units are are the world's best selling and can be found everywhere and cover a dazzling amount of effects. This is where Decksaver steps in.

Whether you use your Boss pedals for processing other instruments, or even for your guitar, any unit that's regularly stomped on can suffer issues - and that's before we consider other stressors such as damage to switches or knobs during travel,or from dust, fluids or accidental impact.

These wonderful devices deserve care during downtime with the kind of protection only Decksaver covers can provide.

Precision moulded in-house to ensure a perfect fit whilst accommodating cables, our cover shields delicate controls and internal components from damage at home, on the road and in the studio.

Fits all the Boss single pedal Stompboxes.

Dimensions

Weight: 0.16kg
Length: 13.5cm
Width: 8.4cm
Height: 3.8cm

Notes: Guitar effects pedals are becoming more and more popular with DJs and producers with their ability to trigger the right noise at exactly the right time.

The H9 / H9 Max is one of the most widely used units in DJ set ups and studios and is full of Eventide's iconic reverb, chorus, delay, modulation, pitch-shifting, and distortion effects, plus 99 presets and easy to use single-knob control.

Whether you use an H9 for processing other instruments, or even for your guitar, any unit that's regularly stomped on can suffer issues - and that's before we consider other stressors such as damage to switches or knobs during travel, or from dust, fluids or accidental impact.

These wonderful devices deserve care during downtime with the kind of protection only Decksaver covers can provide.

Designed and precision moulded in-house to ensure a perfect fit whilst accommodating cables, your Eventide H9 pedal can sit ready for operation.

Shields delicate controls and internal components from damage at home, on the road and in the studio.

Fits

Eventide H9
Eventide H9 Max

Dimensions

Weight: 0.195kg
Length: 13.7cm
Width: 12.2cm
Height: 3.5cm

Notes: It would be hard to talk about the best looping equipment without mentioning Boss and its RC-505 series. Having previously already been the industry staple for looping stations with its RC-505, Boss is back at it again with the five-track follow up, the RC-505MK2.

The RC-505MK2 relies very heavily on its surface pads to record, play and loop tracks. Anything that's designed to be pushed, slid or turned is susceptible to damage from dust, spills and impacts.

This is why the Decksaver Boss 505-MK2 cover has been created.

Designed and crafted right here in the UK to perfectly fit the contours of this exciting unit, Decksaver have gone through years of development to be able to create the perfect cover to protect the RC-505MK2. This super durable polycarbonate lids fit like a glove and feature extreme durability and the highest degree of protection.

Not only that, but because of the small size of the unit, we specifically crafted the cover so that both items slip easily into your backpack with the minimum of space and fuss.

No matter where you are, Decksaver has your 505-MK2 covered.

Weight: 0.647kg
Length: 42.5cm
Width: 23.5cm
Height: 3.9cm

Material: Smoked clear polycarbonate.

Notes: Squarp has always been the home of innovation since its beginnings in 2015 with their Pyramid sequencer. This is no different when it comes to their new polyphonic and stand-alone hardware sequencer, the Hapax.

This unique device boosts creativity as it can synchronize and sequence all of your synthesizers, DAWs and much more together, therefore, it is crucial you protect it!

The Hapax utilizes a lot of touch-heavy pads, knobs and LCD screens, which are important to its use and operation. However, accidents can happen though and damage to the unit is something to avoid at all costs.

To protect your Hapax and your music projects, Decksaver have created the perfect protective cover to provide peace of mind to the user. This super durable polycarbonate shell features extreme durability and offers the highest degree of protection.

Protect your musical-investments. Buy Decksaver.

Weight: 0.65kg
Length: 36.3cm
Width: 21.2cm
Height: 3cm

Material: Smoked clear polycarbonate.

Notes: Ashun Sound Machines (or more commonly known as ASM) created shockwaves when they released their original Hydrasynth. Now, they have released its little brother - the ASM Hydrasynth Explorer! Even though smaller in size, it still packs the same punch.

The ASM Hydrasynth Explorer features a 37-note mid-sized PolyTouchr keybed and a plethora of knobs and buttons for its oscillators, waveform, sound presets and more. With all of these features, there is always the danger of dust, liquid and accidental impact. But not to worry! After high demand from a vast amount of Hydrasynth Explorer owners, we have made a Decksaver for their precious keyboard.

THis Hydrasynth Explorer cover is designed and custom-moulded to perfectly fit whilst accommodating cables, meaning your unit can sit ready for operation whilst being fully protected. The super durable polycarbonate shell features extreme durability and offers the highest degree of protection.

With its easy portability and backpackable size, no matter where you are, you will never have to worry about your Explorer getting damaged with this Decksaver cover.

Notes: Transparent protection for your gear. The Decksaver Sonicware Liven Light Edition Dust Cover is a highly-durable protective cover constructed from a polycarbonate shell for optimal protection. The cover is custom moulded to fit the shape of the Sonicware Liven Light Edition and is finished with a high-quality smoke/clear sheen.

Notes: In 2021, Behringer released one of their most anticipated products - the Behringer RD-9. Inspired by the legendary Roland TR-909 drum machine, the machine boasts 58 buttons and 33 knobs, perfect for crafting your drum sequences to absolute excellence.

Commonly seen in producers' studios when they are crafting beats and instrumentals, it is a highly used piece of equipment within the music industry. To protect those creative ideas evolving from your drum machine, we designed and manufactured a hard shell protective cover!

The Decksaver Behringer RD-9 cover is custom-moulded to perfectly fit whilst accommodating cables, meaning the RD-9 can sit ready for operation while being fully protected. This super durable polycarbonate shell features extreme durability and offers the highest degree of protection.

You will never have to worry about your Behringer RD-9 getting damaged with your Decksaver cover!

Weight: 1kg
Length: 48.2cm
Width: 26.1cm
Height: 4cm

Material: Smoked clear polycarbonate.

Notes: The Rodecaster Pro 2 is the perfect companion for Podcasters, streamers, musicians, and content creators with its ease of use and multitude of ports and capabilities. Whether you record your instruments or stream live. its possibilities are endless.

Whether on the move or in the studio, it is essential that you protect the Rodecaster's delicate screen and controls. The risk of a cracked screen or a broken fader would render it nearly useless. This is why Decksaver created the Decksaver LE Rodecaster Pro 2 Cover.

The cover is a tough but lightweight polycarbonate shell, that protects from dust, liquid, and accidental impact. It's precision-moulded for an exact fit while accommodating cables, so your Rode Rodecaster Pro 2 can sit ready for operation.

With a cover securely fixed, the unit also slides straight into a flight case or bag ready for transportation whilst shielding delicate controls and internal components from damage at home, on the road, and at the gig.

This cover is a Light Edition (LE), which is brought to you at a more cost-effective price but still shields delicate knobs, switches, pads and internal components from dust, liquid and accidental knocks.

Weight: 0.355 kg
Length: 31.2 cm
Width: 27.5 cm
Height: 4 cm

Material: Smoked clear polycarbonate.

Notes: The Arturia KeyLab series has made a name for itself within the music realm with its cutting-edge innovation within keyboards.

The ability to be used as a keyboard, and to control different sounds, effects, and the unique way it can control any major DAW is a feature very few devices have.

With 16 pads, 9 faders, and 9 wheels you can see how much control you have over your sounds and recordings. However, with so many of these buttons and faders, there is always a risk of them getting damaged, which can render the device obsolete.

This is where Decksaver steps in. With their complex nature and banks of switches, knobs, screens and pads, the risk of harm is closer than you think. This is where Decksaver steps in.

Working with this wonderful unit, Decksaver have measured, designed and custom-moulded right here in the UK, a super-tough polycarbonate cover to perfectly fit the contours of this exciting Arturia device.

With years of experience working with plastics, we have created the perfect cover to protect your machine against dust, debris, liquids, smoke and accidental impacts.

The super-durable polycarbonate shells feature extreme durability and offers the highest degree of protection.

Dressing your unit in a Decksaver cover should mean you will never have to worry about your Keylab 61 getting damaged at home, in the studio or at the gig.

Fits

Keylab 61 MK1
Keylab 61 MK2

Dimensions

Weight: 1.2 kg
Length: 88.5 cm
Width: 30.7 cm
Height: 5.1 cm

Notes: The Arturia KeyLab series has made a name for itself within the music realm with its cutting-edge innovation within keyboards.

The ability to be used as a keyboard, and to control different sounds, effects, and the unique way it can control any major DAW is a feature very few devices have.

Working with this wonderful unit, we have measured, designed and custom-moulded right here in the UK, a super-tough polycarbonate cover to perfectly fit the contours of this exciting Arturia device.

With years of experience working with plastics, we have created the perfect cover to protect your machine against dust, debris, liquids, smoke and accidental impacts.

This super-durable polycarbonate shells feature extreme durability and offer the highest degree of protection. Dressing your unit in a Decksaver cover should mean you will never have to worry about your Keylab 61 getting damaged at home, in the studio, or at the gig.

Dimensions

Weight: 1.102 kg
Length: 80.1 cm
Width: 30.7 cm
Height: 4.8 cm

Material: Smoked clear polycarbonate.

Notes: The versatile Erica Synths Perkons HD-01 is a sight to behold and hear with its highly crafted sound engine and features. It's a hybrid of a drum machine and synthesizer with a powerful set of four sonically versatile hybrid voices. The plethora of 80 buttons and over 40 knobs are all there to create a unique sound texture.

With their complex nature and banks of switches, knobs, screens and pads, the risk of harm is closer than you think. This is where Decksaver steps in.

Working with this wonderful unit, Decksaver have measured, designed and custom-moulded right here in the UK, a super-tough polycarbonate cover to perfectly fit the contours of this exciting Erica device.

With years of experience working with plastics, Decksaver have created the perfect cover to protect your machine against dust, debris, liquids, smoke and accidental impacts.

Utilising our Soft-fit inserts, you can be sure of a great fit to your device.

Decksaver's super-durable polycarbonate shells feature extreme durability and offer the highest degree of protection.

Dressing your unit in a Decksaver cover should mean you will never have to worry about your Perkons getting damaged at home, in the studio, or at the gig.

Dimensions

Weight: 0.702 kg
Length: 46.9 cm
Width: 32.6 cm

Material: Smoked clear polycarbonate.

Notes: Coming out of Bristol, England, the UDO Super 6 Desktop is a fully-featured analogue-hybrid 12 voice synthesizer that packs the same punch as the original Super 6 but with the benefits of a more compact footprint.

The magnificent vibrant warm sounds that come from the device have to be heard to be believed.

With their complex nature and banks of switches, knobs, screens and pads, the risk of harm is closer than you think. This is where Decksaver steps in.

Working with these wonderful units, Decksaver have measured, designed and custom-moulded right here in the UK, a super-tough polycarbonate cover to perfectly fit the contours of this exciting UDO device.

With years of experience working with plastics, Decksaver have created the perfect cover to protect your machine against dust, debris, liquids, smoke and accidental impacts.

The super-durable polycarbonate shells feature extreme durability and offer the highest degree of protection.

Dressing your unit in a Decksaver cover should mean you will never have to worry about your Super 6 getting damaged at home, in the studio, or at the gig.

Dimensions

Weight: 0.686 kg
Length: 46 cm
Width: 30.3 cm
Height: 5.2 cm

Notes: The Waldorf Iridium, M & KYRA machines are gloriously high-quality devices, with each one having its own unique synth capabilities.

Just on the base level, the Kyra has a 128-Voice virtual analog synth with 8 parts, whilst the Iridium has a 16-Voice Synthesizer and the M has an 8-Voice Polyphonic Wavetable Synthesizer.

That is just the surface level of musical power they have.

With their complex nature and banks of switches, knobs, screens and pads, the risk of harm is closer than you think. This is where Decksaver steps in.

Working with these wonderful units, we have designed and custom-moulded right here in the UK, a super-tough polycarbonate cover to perfectly fit the contours of these exciting Waldorf devices.

With years of experience working with plastics, we have created the perfect cover to protect your machine against dust, debris, liquids, smoke and accidental impacts.

This super-durable polycarbonate shells feature extreme durability and offer the highest degree of protection.

Dressing your Waldorf in a Decksaver cover should mean you will never have to worry about your Iridium, M or KYRA getting damaged at home, in the studio, or at the gig.

Fits:

Iridium
M
Kyra

Dimensions:

Weight: 0.665 kg
Length: 44.5 cm
Width: 30.8 cm
Height: 4.5 cm

Material: Smoked clear polycarbonate.

Notes: Korg is a household name in the music industry and it's unsurprising when you see devices such as the Microkorg and Microkorg S.

Both of these units feature the rare inclusion of a vocoder which is a sight to be heard and seen in itself. These wonderful devices have sat at the heart of many set-ups over the last twenty years and it's not hard to see why.

Even though they are quite small in nature compared to other synthesizers they boast a luscious soundscape of synth sounds that can rival the larger synthesizers. With such power in a compact body, it's essential to keep it protected from any impacts and the ingress of dust, liquids and smoke. This is where Decksaver steps in.

The Microkorg cover is a tough but lightweight polycarbonate shell that protects your device from any mishaps or accidents. It's precision-moulded for an exact fit, while still accommodating cables, so your Microkorg or Microkorg S can sit ready for operation.

With its slim profile, the unit and cover will also slip straight into a flight case or bag ready for transportation, whilst shielding delicate controls and internal components from damage at on the road.

Decksaver have your Korg Microkorg covered.

Light Edition - made from super-durable polycarbonate but reaching you at a more affordable price.

Notes: The SSL SiX may be a compact desktop mixing console, but it packs a real punch and is feature laden whether at a live gig, in the studio or on location.

Decksaver's professional mixer range of mixer covers gives audio engineers peace of mind whatever the scenario.

Designed and engineered in the UK specifically for the analogue SiX, our smoked clear Decksaver cover is manufactured from polycarbonate, a tough transparent plastic made to our own specification.

Each design is rigorously tested before it carries our name so you can rest assured.

Shields faders, buttons, knobs and lights from dust, liquid and accidental impact whilst keeping cables and settings intact.

Recommended by the industry, used by professionals.

Dimensions

Weight: 0.65kg
Length: 32.4cm
Width: 27.5cm
Height: 9.04cm

Material: Smoked clear polycarbonate.

Notes: The Loupedeck CT is a unique device that gives you the experience of working more faster and efficiently with programs such as Adobe Lightroom, Photoshop, Premier Pro, Final Cut Pro, and Ableton Live.

This wonderful piece of gear relies very heavily on its touchscreen and knobs which means it cries out for protection from accidents. That's where Decksaver comes in with our Loupedeck CT cover.

Decksaver have created a tough but lightweight polycarbonate shell that protects the CT from dust, liquid, and accidental impact. It is precision-moulded for an exact fit while accommodating cables, so your Loupedeck CT can sit ready for operation.

Adding very little to the overall size, its slim profile makes it easy to slide straight into a case or bag ready for transportation whilst shielding delicate controls and internal components.

This cover is a Light Edition (LE), which is brought to you at a more cost-effective price but still shields delicate knobs, switches, pads and internal components from dust, liquid and accidental knocks.

Dimensions

Weight: 0.214 kg
Length: 15.5 cm
Width: 16.1 cm
Height: 2.5 cm

Material: Smoked clear polycarbonate.

Notes: The Loupedeck+ is the perfect companion for photo and video editors and color graders. The 8 wheels on the upper part of the board give users the ability to change each value of the photo/video's RGB channel, such as exposure, highlights and shadows.

It's like having an analogue mixing board for music but for your visuals and with this device, you will never have to worry about moving your mouse again. We wanted to protect your ability to do so, so we created the Decksaver LE Loupedeck+ cover.

This specially crafted cover is a tough but lightweight polycarbonate shell that protects from dust, liquid, and accidental impact.

It's precision-moulded for an exact fit while accommodating cables, so your Loupedeck+ can sit ready for operation. With a lid in place, the unit also slides straight into a flight case or bag ready for transportation whilst shielding delicate controls and internal components from damage at home or on the road.

This cover is a Light Edition (LE), which is brought to you at a more cost-effective price but still shields delicate knobs, switches, pads and internal components from dust, liquid and accidental knocks.

Dimensions

Weight: 0.323 kg
Length: 40.2 cm
Width: 15.3 cm
Height: 3.7 cm

Material: Smoked clear polycarbonate.

Notes: The Decksaver Moog Matriarch Synthesiser Cover features an ultra-durable polycarbonate shell, designed to protect from dust, liquid, particulates and accidental impact damage. It will also protect against superficial damage such as scratches or bumps while on the move. The high quality smoke/clear sheen allows you to see the Medusa through the cover, allowing you to see your gear at all times. The smooth and sheen like finish will slide straight into a bag, ideal for the travelling musician.

Notes: Light Edition - still made from super durable polycarbonate but reaching you at a more affordable price. Engineered in the UK specifically for the Akai Pro MPK Mini MK3 Keyboard Controller. Custom moulded to fit the contours of the unit whilst leaving USB connections in place, the MPK Mini MK2 can sit ready for operation. Super durable polycarbonate shell protects delicate keys during transportation and slides straight into a flight case or bag for maximum protection. Don't go losing your keys.

Notes: Custom engineered in the UK for the Arturia Keystep Pro Keyboard Controller, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.

Notes: Light Edition - still made from super durable polycarbonate but reaching you at a more affordable price. Engineered in the UK specifically for the Arturia Keystep 37 Keyboard Controller. Custom moulded to fit the contours of the unit whilst leaving USB connections in place, the MPK Mini MK2 can sit ready for operation. Super durable polycarbonate shell protects delicate keys during transportation and slides straight into a flight case or bag for maximum protection. Don't go losing your keys.

Notes: Custom engineered in the UK for the Elektron Digitone Keys Synthesiser, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.

Notes: Custom engineered in the UK for the Tasty Chips GR-1 Syntheiser, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.

Notes: Custom engineered in the UK for the 1010 Music Blackbox Sampler & Bluebox Mixer & Recorder, Decksaver's super durable polycarbonate shell protects against dust, liquid and accidental impact. Precision trimmed for an exact fit whilst accommodating cables, your MPC can sit ready for operation. Slides straight into a flight case or bag ready for transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.

Notes: Have you ever considered how much you rely on your hardware? Units such as the Atem Mini Extreme sit at the very heart of your setup and without them, content cannot be captured. Dust, liquid and accidental impact have taken many a good unit down over the years - this is where Decksaver steps in. Precision trimmed for perfect fit whilst accommodating cables, Atem Mini Extreme can sit ready for operation- it slides straight into a flight or soft case for maximum protection during transportation. The Blackmagic ATEM Mini Extreme & ATEM Mini Extreme ISO Switcher cover shields delicate controls and internal components from damage at home, on the road and in the studio.

Length: 37.5cm
Width: 14.1cm
Height: 2cm
Material: Smoked polycarbonate