Search dance music

Review: This historic 1972 performance film marked a definitive evolution of Pink Floyd's artistic vision, and is possibly the moment they first truly escaped the more ephemeral pop of the Syd Barrett era and started to become the prog giants that would go on to dominate the 70s both culturally and commercially. The haunting imagery of Pompeii combined with an expertly remixed sound design by Steven Wilson turns this film from a mere document of the past into a multi-sensory experience. Meticulously remastered, each note of 'On The Run' and 'Us and Them' hang with crystalline clarity in the surround mix and the shifts between searing intensity and quiet reflectionifrom the thunderous opening of 'Echoes' to the fragility of 'Mademoiselle Nobs' - are rendered in remarkable detail. It's a profound exploration of Pink Floyd's creative process, capturing the band at a pivotal moment as they craft the sonic landscapes that would later define The Dark Side of the Moon. This release ensures that the film's timeless allure is as potent today as it was over fifty years ago, inviting a new generation to experience the alchemy between image, sound and performance.

Region code: B

Notes: The Jumbler music synthesiser module is a six by six channel analogue signal combiner and distributor for the New Universal Synthesizer System or any Eurorack modular synthesiser. Jumble is one of the N.U.S.S. concepts where the routings of a patch could be re-configured, or jumbled, instantly via voltage control to produce variations on a theme.

Jumbler gives you powerful two-parameter access to the rearrangement of both origins and destinations for up to six modular signals. One to six inputs are routed to one to six outputs, in an order determined by the Rotate control, and combination determined by the Radiate control. Unlike a simple switch module, Jumbler's analogue VCA-based design is specially geared for smooth transitions and hybrid signals.

Jumbler is a great module for hybrid control voltage mashing, complex waveform mixing, on-the-fly effects re-routing, gate and clock re-combinations and more. Some folks have said it is like patching a stack of 6 RxMx circuits.

Width: 10hp
Max Depth (incl. power cable): 43 mm

Power:
178mA@ +12V
92mA @ -12V

Review: More than half a century after its original release, Pink Floyd At Pompeii: MCMLXXII has returned to cinemas. Shot in 1971 at the haunting amphitheatre ruins of Pompeii, the film captured the band in their pre-DSOTM phase, during which time they were moving away from their originally overt psychedelia and space rock ventures and packing their work with a denser thematic and political verve. The DVD edition represents live versions of 'Echoes' and 'A Saucerful of Secrets', among other ashen, ruinous greats, in newly restored clarity - and that's not to mention its accompanying, behind-the-scenes studio footage of an early DSOTM studio session. This is a full 90-minute cut scanned in 4K from rediscovered 35mm negatives, with Steven Wilson providing a lush new audio mix in Dolby Atmos and 5.1.

Region code: 2

Notes: More than just master keyboards, the SL mk2 series is a new chapter in musical keyboard controllers. From the innovative UX Logic interface, seamless integration with the Numa Player, high-definition MIDI 2.0, to the immersive realism of our new keybeds, every detail is crafted to bring your music to life.

The SL gets smarter. With the revolutionary Studiologic UX Logic, first introduced with the Numa X Piano, the SL mk2 series redefines simplicity and elegance. A sleek, modern control panel empowers your creativity, making navigation intuitive and effortless. Create, explore, and control with unparalleled ease.

SL Link, Studiologic's groundbreaking protocol, bridges the gap between your gear and your imagination. With compliant external apps taking full control of the SL mk2, every nuance of your performance stays in perfect sync.

Seamlessly connect the SL mk2 with Numa Player 2, our cutting-edge music software is built now to complement the SL series perfectly.

Numa Player is cross-platform and designed for ultimate versatility, offering a rich selection of high-quality sound libraries. Best of all, these libraries are free for every SL user1, providing you with a full musical experience straight out of the box. Whether you're composing, performing, or exploring, SL Link and Numa Player ensure your creativity knows no bounds.

The SL mk2 takes a leap into the future with MIDI 2.0. Unlock the full potential of your music with greater resolution, richer dynamics, and unprecedented precision. It's not just MIDI; it's music at its most expressive.

Take charge of your studio with dedicated DAW transport controls. From playback to recording, essential features are just a touch away, so you stay immersed in the creative process without breaking stride.

The SL mk2 doesn't just control; it delivers. With dual audio outputs and a headphone jack, it functions as a professional-grade audio interface. Powered entirely by USB-C, it delivers pristine sound from computer or mobile device directly to your speaker system ino extra hardware needed.

Equipped with the TP/110, a high-end, weighted mechanismcombining feather-light portability with robust playability. With reduced bounce and aftertouch triggered by hammer action, every note feels authentic and effortless

Notes: Analogue discrete Synthvoice with two VCOs, three SUB-VCOs, Wavefolder, Noise, Ring Modulator, two loopable ADRS, two LFOs/VCOs, MIXER, 24db Lowpass VCF, VCAOur new Eurorack flagship hits stores this summer. Very compact (pre-patched) discrete synth voice module with excellent analogue technology for endless soundscapes at a reasonable price.

Two discrete VCOs with highly stable tracking

Three analogue Suboscillators (3/4-1/2-1/4 with SQUARE, SAW, TRI) + Gravity Mix -Sync

Wavefolder (VCO 1 TRI WAVE)

White Noise

XOR Ringmodulator

Discrete VCA

24dB LP VCF with overdrive

Dual analogue LFO (one also usable as VCO) with incredible range and keytracking -Two superfast and punchy analog ADSR sections with LOOP function and four TRG outputs (End of ATT, End of DEC)

Mixer section with Master level -Glide presets and huge Patchfield to communicate with other Eurorack Modules.

Screwed metal shaft potentiometer

Rackspace: 36TE
Depth: 25mm

Notes: ***B-STOCK: Box damaged, product in perfect working order***


PreSonus Eris-series studio monitors are used worldwide by audio engineers and producers who need to hear every detail of their recordings. Our best-selling studio monitors just got better! Eris 3.5 media reference monitors deliver studio-quality sound in an elegant, compact form factor that makes them ideally suited for bedroom studios, video production, and high-fidelity gaming setups.

With 25 watts per side of onboard power, the Eris 3.5 reference monitors pack a serious punch, while still delivering clear, accurate audio. The weave and nature of the Eris 3.5's 3.5-inch woofer result in tight bass that you can feel, as well as cleaner overall sound. The one-inch silk-dome tweeter produces refined high-frequencies and is designed to radiate sound with a wide pattern, creating a large optimal listening area. Improved speaker voicing over previous designs delivers richer lows and a smoother crossover transition for articulate, accurate transient reproduction throughout the frequency range and a less-fatiguing listening experience.

A convenient front-panel knob sets the level of both the power amp and the loud, clear headphone amplifier, with its front-panel jack. With three types of inputs, it's easy to connect just about any audio source to Eris 3.5 reference monitors. High- and low-frequency controls let you easily adjust the Eris speaker's frequency response to compensate for the acoustics of your space and create the most accurate sonic reproduction possible.

Need a little more low end? Add an Eris Sub8 BT to build a perfectly matched 2.1 sound system that fits almost anywhere.

Features

3.5-inch, woven-composite, low-frequency driver
1-inch, ultra-low mass, silk-dome, high-frequency driver
50W, Class AB dual amplification
80 Hz to 20 kHz frequency response
98 dB SPL (Peak, @ 1 meter)
High- and low-frequency Acoustic Tuning controls
Balanced, 14-inch TRS inputs; unbalanced, 1/8-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel 1/8-inch output
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)
Comes with speaker wire, 1/8-inch TRS to stereo RCA cable, and stereo RCA to stereo TS cable

Versatile connectivity.

PreSonusr Erisr 3.5 reference monitors connect to virtually any line-level audio source, using rear-panel, 14-inch TRS and RCA inputs and a front-panel, 1/8-inch, stereo line input. You also get a convenient (and loud!) front-panel, 1/8-inch, stereo headphone jack; connecting headphones mutes the speakers.

Built to match your room.

Unlike other home audio speakers that hype the bass at the expense of other frequencies, Erisr speakers provide an even response throughout the frequency range, from bass to treble. This means you'll hear your favourite music exactly as artists and engineers intend it to be heard. High and Low Acoustic Tuning controls let you dial in the Eris 3.5s precisely to your environment to further ensure the best sound possible.
Honest. Expressive. Powerful.

Like all PreSonus media reference monitors, the Erisr 3.5 offers consistent, accurate listening. Their stylish design makes them a welcome addition to living rooms, compact home theatre setups, and gaming rigs, and their smooth and even frequency response ensures that your music - and everyone else's - will sound incredible.

Specs

Electronics
Voltage: 220-240V UK
Wattage: 25 Watts (Each Speaker)
Input impedance: 10 kO

Performance
Peak SPL: 98 dB (@ 1 meter)

Speakers
Crossover frequency: 2.8 kHz

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard
Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Low Frequency (+/-6 dB, center 100 Hz, continuously variable)
Monitor inputs: Bluetooth 5.0, 1 x Stereo 1/8", 2 x Balanced 1/4" TRS, 2 x Unbalanced RCA
Power amplifier type: Class AB

Measurements
Dimensions: 8.30 x 5.50 x 6.00 in

Depth: 6.5" (16.4 cm)
Height: 8.3" (21.0 cm)
Width: 5.6" (14.1 cm)

Notes: ***B-STOCK: Box opened, product in perfect working order***


The smallest speaker in Yamaha's range, the compact MS101-4 sits happily on even the most cramped desktop or attaches to a mic stand for versatile monitoring anywhere.

Supplier's Notes:
The industry standard in compact monitors

Yamaha MS101-4: The de facto standard for compact monitoring in a simple form

The standard model in Yamaha's range of desktop utiility powered monitors, the MS101-4 offers portability in a simple, compact design, with comprehensive functions for outstanding usability. The MS101-4 comes with a 3/8-16 threaded female mounting for direct attachment to a Euro microphone stand. Optional accessories can also be added for use in a wide range of applications.

A compact, convenient approach to high-quality monitoring anywhere

Compatible with both line and mic inputs, the MS101-4 offers the flexibility needed for temporary or permanent use in applications requiring simple, compact monitors.

Simple, portable, durable design

Yamaha Powered Monitor Speaker MS101-4: front and rear

With the controls (power switch, volume and tone controls) and the combo jack input on the lower front panel, you'll find the MS101-4 is easy to operate. The sturdy metal grill offers complete protection for the four-inch cone driver, while the rear panel is equipped with one stereo mini and a TRS Phone input connector, along with an output jack. An AC inlet for a removeable power cord provides excellent portability. The bass reflex port is also located on the rear surface, resulting in a more compact chassis.

MS101-4 Powered Monitor Speaker

The standard model in our range of desktop utiility powered monitors, the MS101-4 offers portability in a simple, compact design, with comprehensive functions for outstanding usability.

30W of amplifier power provides clean, high output sound
Redesigned enclosure for an even lower profile
Combo Input jack accepts both XLR and 1/4" connectors
Directly mountable on Euro microphone stands (optional mic stand adaptor BMS-10A is available for adjusting tilt angle)

General specifications

Speaker type: Full range Powered Speaker, Bass-reflex Type
Frequency range (-10dB): 77 Hz-20 kHz
Maximum output level (1m; on axis): 115 dB SPL *1
Components: LF-HF 4" Cone, 1" Voice coil, Ferrite magnet
Dimensions: W: 142 mm, H: 196 mm, D: 187 mm
Net weight: 2.1 kg (4.6 lbs)
Flying and mounting hardware Screw threads (bottom): 2 x M5 depth 11 mm pitch 60 mm (for 2, M5 x 6-10 mm screws), 1 x 3/8" depth 12 mm (for 1 x 3/8" x 9-11 mm screw)
Amplifier class: Class-D
Power rating: Dynamic: 30 W
Continuous: 20 W
Cooling: Natural cooling (no fan)
I/O Connectors: Mic Input: [Front] INPUT: Combo, [Rear] INPUT LINE 1: Stereo Mini, INPUT LINE 2: Phone (TRS)
Line Out: 1 x Phone (TRS)
AC: 1 x AC inlet
Input impedance: [Front] INPUT: LINE=5.4 kO / MIC= 5.4 kO, [Rear] INPUT LINE 1,2: 10 kO
Input sensitivity: [Front] INPUT: LINE=-10 dBu / MIC=-40 dBu, [Rear] INPUT LINE 1, 2: -10 dBu (VOLUME: Maximum)
Input Level: [Front] INPUT: LINE=+5 dBu / MIC=-25 dBu, [Rear] INPUT LINE 1, 2: +5 dBu (Nominal Input Level / VOLUME: Center), [Front] INPUT: LINE=+20 dBu / MIC=-10 dBu, [Rear] INPUT LINE 1, 2: +20 dBu (Maximum Input Level)
Others: Controls: 1 x VOLUME, 1 x LOW CONTROL, 1 x HIGH CONTROL, POWER
Indicators POWER (Green LED)
Power consumption: 1/8 Power Consumption: 10 W, Idle Power Consumption: 3 W
Power requirements: 100 V - 240 V, 50/60 Hz
Options: Mic stand adaptor BMS-10A, Free-angle clamp BAS-10, Wall mounting bracket BWS20-190, Ceiling bracket BCS20-150 / BCS20-210

Notes: ***B-STOCK: Box opened, product in perfect working order***


A clever take on generative sound, the Crum Hum is a three-voice soundscaping instrument, capable of creating unique melodic and harmonic tones based on 12 different sound engines.

Supplier's Notes:
Crum Hum is a 3-voice experimental and expressive soundscaping instrument with generative, ever evolving melodic and harmonic creation.

3 melodic voices with expressive touch control

12 different Sound engines

Generative & randomized melodic and chord generation

12 different Scales

Delay, Reverb, Overdrive, LFO

3.5mm CV output

3.5mm Clock input

Send and receive Midi sequencing and Midi CC.

Notes: ***B-STOCK: Box opened, product in perfect working order***


The MetaModule Audio Expander (MetaAIO) adds an additional 6 CV/Audio inputs and 8 CV/Audio outputs to your MetaModule patches, via a ribbon cable connected to the main MetaModule. The MetaAIO provides the same high-quality as the MetaModule's Audio/CV jacks (24-bit, 48kHz default, up to 96kHz).

Notes: ***B-STOCK: Box damaged with tears on packaging, but product is in excellent condition and in perfect working order***


The Headliner 3-Tier Desktop Synth Stand was designed to improve your workflow and help you stay organized while fitting more gear on your production desk. It fits three compact devices like synthesizers, controllers, drum machines, and effects modules. The angled design makes it easier to reach knobs and view LCD screens.

The Headliner 3-Tier Desktop Synth Stand is adjustable in width from 7.3" to 11.5" and fits a variety of devices from Roland, Korg, Elektron, and more (partial list below). It is made from solid steel and includes non-slip rubber strips for added stability.

Features
Improve your workflow and stay organized while fitting more gear on your production desk.
Fits three devices such as synthesizers, controllers, drum machines, and effects modules.
Angled stand makes it easier to reach knobs and view LCD screens.
Solid steel construction with non-slip rubber strips keep stand and equipment in place.
Width adjustable from 7.25" to 11.5". Best fits devices from 8" to 14" in width.
The lower tier has a depth of 7". The middle and upper tiers have a depth of 5.25".
Overall dimensions of stand (WxDxH): 7.25"-11.5" x 17" x 17.5".
Includes non-slip rubber strips.

Fits*: Akai Fire, Alesis SR-16, Arturia SparkLE, Behringer Crave, Behringer TD-3, Behringer RD-6, Elektron Digitone, Native Instruments Maschine Mikro MK3, PreSonus ATOM SQ, Akai LPD8, Akai MPX8, Dreadbox Typhon, Korg nanoPAD2, Korg SQ-1, Korg Volca Bass, Korg Volca Beats, Korg Volca Drum, Korg Volca Kick, Korg Volca NuBass, Korg Volca Sample 2, Roland Boutique Series, Roland MC-101, Roland TB-3 Touch Bassline, Roland TR-6S
*Some devices may not fit on all tiers.

Notes: ***B-STOCK: Box damaged, product in perfect working order***


UDG have further fine-tuned what was already a great design concept of a flight case into one especially for the most discerning DJ/producer. Constructed from solid 9mm thick plywood, the outside is laminated in a black finished honeycomb/hexagonal "Stage Grip" pattern. The inner sides are protected with high density diamond embossed EVA foam protective padding. This extremely robust padding protects the equipment against scratches, dust or other damages, creating a unique stylish & practical finish.

Extra-wide black finished aluminium profile & massive UDG logo embossed ball corners are incorporated to ensure longevity & maintaining a permanently attractive, professional design. The UDG Ultimate Flight Case Rane Four Black Plus (Laptop Shelf + Wheels) also features heavy-duty, spring-loaded handles for a secured lift & load.

UDG Ultimate Flight Case Rane Four Black Plus (Laptop Shelf + Wheels) not only transports your complete set up easily & securely, but also facilitates devices to be setup within minutes. With these premium features incorporated, the UDG Ultimate Flight cases provide premium professional quality in a very stylish modern black coloured combination.

Specifications:

Colour: Black
Weight: 16,00 kg / 35.2 lbs
Outer Dimensions (W x H x D): 89.0 x 53.1 x 23.3 cm | 35.0 x 20.9 x 9.2 inch
Inner Dimensions (W x H x D): 78.4 x 39.3 x 9.0 cm | 30.8 x 15.4 x 3.5 inch
Material: Heavy duty construction of 9 mm thick plywood
Protection: Improved powder coated and anodized hardware
High density diamond embossed EVA foam & carpeted protective padding
Dual anchor rivets with included washer
Extra-wide silver solid aluminium profiles
Secure stacking due to stackable ball corner

Extras

Convenient 80 mm space at rear for connections & PSU storage
Cable access hole with removable UDG emblem cover
Removable front access panel
Roller wheels with high quality in-line skate bearings for convenient transport
Fits: 1x Rane Four or Performer + 1x Laptop + Accessories

Notes: ***B-STOCK: Box opened, product in perfect working order***


Valve-based pre-amps meet cabinet simulation in this ultra-flexible pedal. Dial in your tone, patch in effects, and control the lot via MIDI or USB. A brilliant combination of analogue and digital.

Supplier's Notes:
Tsakalis is proud to release their most ambitious product to date. Seamlessly blending the authentic analogue warmth of real tubes with a highly configurable cabinet simulator, plus flexible outputs and control options, the MOTHERSHIP - Real Tube Preamp stands out as possibly the most highly featured and flexible front end for any guitar rig currently available.

The MOTHERSHIP is a complete solution for authentic vintage and modern genuine tube amp tones, in a user-friendly and lightweight, yet rugged package that is designed to slot in easily into any setup.

Both channels on the MOTHERSHIP are identical, yet highly configurable.

Featuring three gain modes (High, Medium and Low) on each channel, along with a toggle switch for selecting between your three chosen speaker simulations, the MOTHERSHIP can conjure up a multitude of both iconic, familiar and unique tones easily and intuitively. Each channel also features two master gain controls along with two master volumes, allowing four different voices to be instantly recalled, either by pressing the relevant footswitch or via MIDI command.

Demonstrating its prowess as a fully comprehensive plug and play device, the MOTHERSHIP also features over 70 free custom cabinet simulations to choose from (when connected to Tsakalis' own TAW Editor app via USB), separate dedicated simultaneous outputs for both the cabinet simulator and a "dry" output for your amp of choice, MIDI control of channel, A/B selection and bypass and also a serial mono FX loop for added tonal versatility.

Fully-featured all-analogue real tube preamp design

The MOTHERSHIP represents the perfect "amp-in-a-box" pedal, seamlessly blending a beautifully designed, real tube front end with a highly flexible cabinet modelling solution. However, it also shines as a genuine tube overdrive pedal when connected to the front of your amplifier, or when running it as the tone defining preamp section of your setup, directly into your power amp. It can also do both of these things simultaneously.

Quad channel tube preamp and drive

This preamp pedal has two completely independent channels, each featuring a four-band EQ, two different Gain/Volume sections, three selectable gain-stages and three selectable cabinet simulations, plus a serial mono effects-loop for your external effects, MIDI in and free access to Tsakalis Audioworks' full free online library of carefully selected and curated digital cabinet simulations.

The MOTHERSHIP's two independent channels were carefully designed with a real tube audio path, providing a huge range of tones from warm or sparkling cleans all the way to high gain tube driven distortion. The two ECC83 (12AX7) tubes, run at a comfortable 240 Volts, providing touch sensitivity, headroom and plenty of gain and tube sag as required.

Each channel features a four band EQ (Bass, Mid, Treble and Presence) and two different Gain and Volume controls (Gain A-Volume A / Gain B-Volume B) transforming the MOTHERSHIP into a quad channel powerhouse.

The dedicated MODE switch for each channel is responsible for the tube audio path structure, giving 3 different gain modes L = Low, M = Mid and H = High, allowing you to easily customize completely different lead and rhythm tones with different gain structures as well as a solo volume boost for each and access them on-the-fly by simply pressing the relevant footswitch.

Notes: Great value DJ speakers, ideal for home setups. Excellent clarity, plenty of power and solid bass response thanks to 5-inch Kevlar woofers. Sold as a pair.

Supplier's Notes:
Optimized for music production and mixing, this pair of active, bi-amplified Hercules Monitor 5 speakers (2 x 80 watts RMS) will take your home studio to the next level with precise, clear and powerful audio rendering.

Box contents:

2 monitoring speakers
2 power cables
User manual and warranty information

Speaker Connectivity:

1/4" Jack / TS
RCA
XLR

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Great value from this compact eight-channel mixer featuring built-in Alesis effects. Bluetooth and USB in/out give added versatility, allowing you to mix just about any sound source.

Supplier's Notes:
Easy-to-Use Analogue Audio Mixing with Built-in Effects from Alesis

The Alto Professional TrueMix 800 FX is a portable audio mixer with built-in DSP effects that delivers all the essential features you need for home recording, livestreaming, podcasting, or performing. The TrueMix 800 FX features 16 effects including chorus, flange and an assortment of high-quality delays and reverbs. There's also a convenient Bluetooth channel for easily streaming from your personal devices. A unique feature to the TrueMix Series, the Bluetooth channel also supports feedback-free phone pairing by utilizing mix-minus technology. There are eight analogue inputs with high-headroom circuitry for minimal noise and clipping in your signal. The four Mic Input Channels offer XLR inputs that are great for connecting dynamic mics or condenser mics with 48v phantom power. These channels also have balanced 14" line inputs for connecting instruments and other line-level signals. There are also two Stereo Input Channels, each with dual balanced 14" TRS inputs. These inputs are perfect for your line level audio sources. All channels feature a two-band EQ with colour coded knobs that make it easy to dial in your perfect sound while operating in low-light situations. There are even extra knob caps included so you can fully customize the look of your TrueMix 800 FX. Connecting the TrueMix 800 FX to your computer is also lightning fast, with plug and play connectivity on Windows and macOS. The TrueMix 800 FX is a feature-packed compact audio mixer that's perfect for using on-the-go.

Flexible Output Routing

Whether you're recording a podcast, livestreaming online, or making music at home, being able to hear yourself and easily route audio is essential. The TrueMix 800 FX features a variety of output and routing options to handle any scenario. There are four headphone outputs, each with their own volume control knob. If you need to send your audio signals to another destination like an external monitor or effects unit, each channel is equipped with a send knob so you can always dial in the perfect mix. For recording, the USB output sends a copy of the main outputs to your computer, or you can connect the 2-Track in/out to an external recorder which can also be sent directly to the headphones. The TrueMix 800 FX delivers everything you need to take full control of your audio routing in any situation.

Product Features:

TrueMix 800 FX Features
USB I/O for audio playback and stereo recording
Dedicated bluetooth channel with mix-minus return for feedback-free phone pairing
Four headphone outputs with independent volume control
16 built-in Alesis multi-fx with dedicated return channel
1/4" Main, Tape, and AUX outputs
Four mic input channels with phantom power and balanced line inputs
Two stereo input channels with balanced 1/4" TRS jacks
Two-band EQ on all channels
2-track inputs w/ assignable routing: main mix or headphone out
Eight-segment LED VU meter for precise level monitoring
Extra knob caps included in the box for added customization

Technical Specifications

Frequency Response All inputs: 20 Hz - 22 kHz (i1 dB)

THD+N (Total Harmonic Distortion)
All inputs: < 0.005% (@ 4 dBu, 1 kHz)

Gain Range Mic inputs (Channels 1-2): 0 - 50 dB Line inputs (Channels 1-2): 15 dBu - 35 dBu Line inputs (Channels 3-6): -20 dBu - +20 dBu

Max Voltage Gain
70 dB (MIC INPUT to MAIN MIX OUTPUT)
80 dB (MIC INPUT to CTRL ROOM / PHONES OUPTUT)
60 dB (MIC INPUT to MON SEND)

SNR (Signal-to-Noise ratio)
All inputs: > 110 dBu

Crossover Frequency
Adjacent inputs: < -80 dB @ 1 kHz
Inputs to outputs: < -75 dB @ 1 kHz (stereo L/R, Channels 1-2, panned hard left or right)

Phantom Power: +45 ~ +49V with switch control

Impedance
Mic inputs: 3.9 kO
All other inputs: > 10 kO
Aux outputs: 1 kO
All outputs: 120 O

Equalization High:
+/-15 dB @ 12 kHz
Low: +/-15 dB @ 80 Hz

Bluetooth
Profile: A2DP
Module: Bluetooth 5.0
Operating Frequency: 2402 MHz - 2480 MHz
Range: 100 ft. / 30.5 m

Connectors
(6) 1/4" (6.35 mm) TRS outputs
(6) 1/4" (6.35 mm) TRS stereo L/R inputs
(4) 1/4" (6.35 mm) TRS headphone outputs
(4) 1/4" (6.35 mm) TRS mono inputs
(1) Standard RCA L/R input
(1) Standard RCA L/R output
(4) XLR inputs
(1) USB type-B input
(1) DC power input

Controls
(1) Power switch
(15) volume control knobs (1 per input, 1 return, 1 EFX return, 1 2-track/USB in, 4 headphone outs, 1 Bluetooth, 1 main)
(6) Stereo pan control knobs (1 per input)

(6) Mon volume control knobs (1 per input)
(6) EQ Low control knobs (1 per input)
(6) EQ Hi control knobs (1 per input)
(6) Gain control knobs (1 per input)
(4) Buttons (1-EFX mute, 1 Bluetooth, 2 Source Select)
(1) Horizontal sliding switch

Indicators
(1) Power LE
(6) Peak LEDs
(1) Phantom LED
(16) Main Out Meter LEDs
(1) Bluetooth LED

Power Connection: DC Voltage: 18V, 1.2A Consumption: 18W

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


One of our favourite DJ turntables, courtesy of German DJ brand Reloop. Classic Technics-inspired design updated with nice features like reverse mode, 78rpm setting and second start/stop button.

Supplier notes:
With the RP-7000 MK2, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.

Sturdy Casing Construction:

By using a combination of metal, rubber and synthetic materials, the RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metallic finish.

Balanced S-Shaped Tone Arm with Upgraded Tone Arm Base:

The RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

Dual Start/Stop Buttons, Precise Motor Control and Reverse Function:

As well as the above technical innovations, the RP-7000 MK2 is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.

High-Resolution Pitch Section with Digital Fader:

Using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

High-Quality Connections and Integrated Phono Pre-Amp:

Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

Powerful Motor with Extensive Adjustment Possibilities:

The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 - 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.

Notes: ***B-STOCK: Sleeve damaged but otherwise in excellent condition***


Being the same size as the average laptop these will fit perfectly in your backpack, making them super portable and an easy option to have on hand as back up. Offering more control than a 7" but still being lighter than a 12" these make a welcome addition to our standard colour range.

Serato control vinyl features our re-mastered Serato NoiseMap Control Tone that is 6db louder than earlier pressings, allowing for precise tracking, better vinyl wear and the most authentic feeling digital vinyl experience on the market.

Notes: Hercules, a manufacturer of DJ equipment since 2003, is expanding its product line with the Hercules HDP DJ60 closed-back circumaural headphones. With their comfortable pivoting earcups, these headphones are designed for advanced DJs who need powerful sound that can still be heard above the noise during live performances.

These high-quality headphones fold up for easy transportation and come with a 6.35mm (1/4") jack adapter to plug into any type of device. The advanced drivers deliver an accurate high-quality audio to cover the full audio spectrum. With their DJ design and jogwheel-like earcups, these headphones will appeal to both budding DJs who want to invest in professional quality headphones, and advanced DJs who mix for live audiences.

With better sound isolation and improved comfort, plus improved drivers, these headphones deliver a wider frequency range than their little brother, the Hercules HDP DJ45. Wide-range sound: from the low to the high frequencies: 15Hz-22kHz High-sensitivity headphones, 105dB @ 1vrms, to be clearly audible in any environment Excellent noise isolation: closed-back headphones, circumaural design Comfortable: very soft padding on the earcups on the underside of the headband Wired: spiral cable that can stretch up to 3m (9.8 feet) Convenient: wire on one side only, pivoting earcups, and foldable headphones for easy transportation Adapter included: 3.5mm (1/8") stereo jack output + 6.35mm (1/4") stereo jack adapter.

Notes: The HDJ-F10 is a new model of professional DJ headphones with ultra-low-latency SonicLink
wireless technology. By combining the headphones with the HP-TX01 transmitter, which can be bought separately or in a bundle, DJs can use the SonicLink connection to seamlessly deliver wireless audio to their ears. This means they can move freely in the DJ booth without ever tangling or pulling on a wire. The headphones also feature high-resolution, powerful sound, and outstanding insulation and durability. Bluetooth connectivity is included too, with Noise Cancelling and Transparency modes available.

Ultra-low-latency wireless communication via SonicLink*
The uniquely developed SonicLink technology in the HDJ-F10 headphones enables DJs to move around as they play, without the constraints of cables. When the HP-TX01 transmitter is connected to a DJ mixer, SonicLink transmits sound to the headphones with just 9 msec of latency - 20 times faster than the commonly used Bluetooth SBC codec so DJs will never notice the delay - enabling accurate monitoring and mixing. The transmitter is compact, lightweight, and easy to carry with other DJ gear.

High-volume playback and sound insulation for accurate monitoring
DJs can hear their music loud and clear, even in an extremely noisy DJ booth or onstage, when using the SonicLink wireless connection. The headphones can deliver high-quality sound reproduction at high volumes. And, thanks to newly developed earpads and housing structures, they achieve an outstanding level of sound insulation that's higher than even the Pioneer DJ flagship HDJ-X10 model.

Tight kick sound and wide-ranging audio
The HDJ-F10 is the flagship headphones model under the AlphaTheta brand, designed with a meticulous focus on sound quality. The newly developed 40 mm driver achieves a high-resolution sound, from low to high frequencies, where even the smallest details in the music can be clearly heard. The housing structure combines a bass-reflex duct and air chamber to ensure a high level of sound insulation while also expanding and enhancing low frequencies. This enables DJs to monitor crisp, punchy kick sounds, even in a loud DJ booth, and provides a studio-level monitoring environment for a wide range of situations, from DJing to music production and listening to tracks when preparing for gigs.

Ruggedness for professional use
DJs can rely on the HDJ-F10 headphones to handle life in any environment. They're highly robust and they've passed the stringent US Military Standard MIL-STD-810H shock test.

Bluetooth connectivity and Noise Cancelling mode to serve a complete DJ workflow
While preparing tracks, DJs can choose whether they want to reduce or let in the sound from the world around them when connected to a device via Bluetooth. In Noise Cancelling mode, ambient noise is shut out - even in a busy city - so DJs can immerse themselves in the music as if listening to it in the studio. With Transparency mode, external sounds are let in so it's possible to continue having in-person conversations while listening to music.

Long battery life for extended DJ sets
A full battery gives 9 hours' use with SonicLink or 30 hours' use with Bluetooth. DJs can also play with a wired connection.

*HP-TX01 transmitter enables SonicLink connection - available separately or in the HDJ-F10-TX bundle

Notes: Really nice approach to sequencing from Omni-Tone. The Melodi generates 'semi-random' patterns based on tunable parameters and probabilities. Dial in combinations of scales, pitch range, tempos and so on to create unique melodies.

Supplier's Notes:
Melodi generates sequences based on the mood you set so you can create the sound you're searching for- it can be tweaked to create anything from a powerful bassline to a sparkly melody.

Ships with version 2 of firmware

Improvements: Skip, tie, length are now LIVE knobs. Added a ping-pong trend line and a blues scale.

GENERATE

1. NEW - will prompt Melodi to generate a new sequence.
2. TRIGGER IN - accepts a trigger to prompt Melodi to generate a new sequence.

CYCLE

1. ON/OFF - determines if the sequence will loop or require retriggering.
2. TRIGGER - button and jack trigger the sequence to restart at the beginning.

TUNE

* While adjusting tunable parameters, the light bar will reflect the current selection. For continuous parameters the light bar shows amount from 0-100%, for quantized parameters the light bar shows steps.
1. SKIP (continuous) - sets the probability that a note will be skipped in a sequence.
2. PLUCK (continuous) - sets the length of the gate, from short plucks to gliding between notes (portamento).
3. TIE (continuous)- sets the probability that a note gets tied to the next (effectively making the note last two clock cycles).
4. TREND (continuous) - sets whether the sequence trends upwards or downwards in pitch.
5. SCALE (quantized) - select the quantization of the notes used in the sequence. Choose from perfect notes, pentatonic scale, diatonic scale, chromatic scale and completely unquantized.
6. RANGE (continuous) - sets the range of notes from 1 to 4 octaves (unquantized)
7. LENGTH (quantized) - select the number of notes to play in a sequence (from 1-16, or infinitely generating at the max position).
8. SPEED (continuous) - sets the tempo of the internal clock, between 20 and 2000 BPM.

OUT
1. GATE - outputs the gate of the notes in the sequence.
2. PITCH - outputs the pitch (in V/OCT) of the sequence.

CLOCK

1. SELECT - Melodi will generate internal clock signal if select switch is up, and will use external clock signal when down
2. IN - connect external clock signal
3. OUT - output clock signal

Technical specs:

- Module Size: 3U X 8HP X 25 Mm Deep.
- Current Draw: 85mA @ 12V, 10mA @ -12V.

What's in the box:

- Ready to use Assembled Module
- Mounting Screws
- Power Cable
- User Manual

Notes: The Technics Slipmats combine functionality and style in an ideal way. The exclusive white "Technics" print on a striking leopard background gives your DJ setup a unique and distinctive look.

By using the slipmats, static charge is reduced, which prolongs the lifespan of both your records and your turntable. They also allow for special DJ techniques like scratching and backspin, which would otherwise cause long-term damage to your records without slipmats.

These slipmats are manufactured and printed in Belgium. They impress with their premium craftsmanship, durable material, and excellent value for money. The delivery comes in a practical double pack.

Notes: The Technics slipmats combine functionality and style at the highest level. The exclusive, two-tone "Technics" print on a black background creates a striking, unique look that enhances any DJ setup.

By using the slipmats, static charge is reduced, which not only extends the life of your records but also protects your turntable. Additionally, they enable special DJ techniques such as scratching and backspin, which would cause long-term damage to your records without slipmats.

These slipmats are made and printed in Belgium. They impress with their excellent craftsmanship, durable material, and outstanding value for money. The delivery comes in a convenient twin pack.

Notes: The Technics slipmats combine functionality and style at the highest level. The exclusive, two-tone "Technics" print on a black background gives them a stylish and unique look that perfectly complements your DJ setup.

By using slipmats, static charge is reduced, which not only extends the lifespan of your records but also protects your turntable. They also enable special DJ techniques like scratching and backspin, which would cause long-term damage to your records without slipmats.

Our slipmats are made and printed in Belgium. They are characterized by excellent craftsmanship, durable material, and an outstanding price-performance ratio. The delivery comes in a practical double pack.

Notes: The Technics slipmats combine functionality and style in one. The exclusive white "Technics" print on a multicoloured camouflage background creates a distinctive look that enhances any DJ setup.

By using slipmats, static charge is reduced, which not only extends the lifespan of your vinyl records but also your equipment. They also enable special DJ techniques like scratching and backspin, which would cause long-term damage to your records without slipmats.

These slipmats are made and printed in Belgium. They are known for their high-quality craftsmanship, durable material, and excellent value for money. The delivery comes in a convenient double pack.

Notes: Goldring, a globally recognised name in the world of analogue audio and renowned for its precision-engineered phono cartridges and turntables, introduces its EXTRACT Stylus Cleaning Kit.

An essential tool kit for any vinyl enthusiast, EXTRACT offers everything you need to keep your turntable cartridge stylus in pristine condition.Whether performing daily routine maintenance or tackling a more thorough deep clean, this kit ensures your delicate stylus stays in peak condition, without the risk of damage.

Working seamlessly with all stylus and cartridge types, the EXTRACT Stylus Cleaning Kit consists of a magnifying lens, an anti-static stylus cleaning brush and a cleaning gel pot.

These indispensable tools arrive in a handcrafted storage box, designed to protect them in transit and keep everything neatly organised when not in use

Notes: Lettuce with the Colorado Symphony is a genre-defying, electrifying performance that captures the powerhouse fusion of funk, jazz, and orchestral grandeur. Recorded live with the Colorado Symphony in 2018, this album features Lettuce's signature groove-driven sound paired with the rich, sweeping power of a full orchestra. It's a unique and breathtaking experience that showcases the band's improvisational brilliance alongside orchestral precision.

Available on digital, vinyl, CD and Blu-ray, this release is a must-have for fans of both Lettuce and orchestral music, offering a fresh, exciting take on the live performance experience. Get ready to groove to the rhythm of symphonic funk like never before!

Region code: A

Notes: These slipmats combine functionality and style. The exclusive "FuckYou" print on a black background makes a bold statement and ensures a unique look on any DJ setup.

Slipmats minimize static electricity and help extend the lifespan of your records and equipment. They also allow for special DJ techniques, like scratching or backspins, which would otherwise permanently damage your beloved records without slipmats.

Our slipmats are made and printed in Belgium. In addition to the high-quality print and durable material, they stand out with an attractive price-performance ratio. They are delivered as a double pack.

Notes: The slipmats combine functionality and design in an ideal way. The exclusive black/white print in the Eye-Pyramid Artwork gives your DJ setup a striking and unique look.

The slipmats reduce static charge, which not only extends the lifespan of your records but also protects your turntable. They are also essential for special DJ techniques such as scratching and backspin, as without slipmats, they can cause damage to your vinyl records.

These slipmats are crafted with the highest precision in Belgium and are known for excellent workmanship, durable material, and outstanding value for money. They come delivered in a convenient double pack.

Notes: The Technics Slipmats combine functionality and style in the ideal way. The exclusive white "Technics" print on a pink camouflage background gives your DJ setup a unique and eye-catching look.

By using slipmats, static charge is reduced, which not only extends the life of your records but also protects your equipment. They also enable special DJ techniques such as scratching and backspin, which would cause long-term damage to your records without slipmats.

These slipmats are manufactured and printed in Belgium. They impress with their top-notch craftsmanship, durable material, and excellent value for money. The delivery comes in a convenient double pack.

Notes: These slipmats combine functionality and style in the perfect way. The exclusive orange "Technics" print on a black-grey camouflage background creates a unique and distinctive look that enhances any DJ booth.

By using slipmats, static charges are minimized, which extends the lifespan of your records and equipment. They also enable special DJ techniques like scratching or backspin, which could otherwise cause long-term damage to your vinyl records without slipmats.

These slipmats are manufactured and printed in Belgium. They stand out for their high-quality craftsmanship and durable material, while offering an excellent price-performance ratio. The product comes in a practical double pack.

Notes: These slipmats combine functionality with style. The exclusive "Technics" print on a black-grey camouflage background creates an exceptional look, perfect for any DJ booth.

Thanks to the slipmats, static charge is reduced, which prolongs both the lifespan of your records and your turntable. They also enable special DJ techniques such as scratching or backspin, which would cause long-term damage to your records without slipmats.

These slipmats are manufactured and printed in Belgium. They stand out not only for their high-quality craftsmanship and durable material, but also for offering an excellent price-performance ratio. They are delivered in a practical two-pack.

Notes: The Technics Slipmats perfectly combine functionality and design. The exclusive "Technics" print in white on a striking black-blue background with warp patterns gives them a distinctive look that makes your DJ setup even more impressive.

Thanks to the slipmats, static charge is reduced, which not only extends the lifespan of your records but also that of your turntable. They are also essential for special DJ techniques like scratching and backspin, as using turntables without slipmats can cause damage to your vinyl records.

These slipmats are made in Belgium with the highest precision and offer excellent craftsmanship as well as an outstanding price-performance ratio. The delivery comes in a convenient double pack.

Notes: The Technics slipmats perfectly combine functionality and design. The exclusive "Technics" print in white on a beige leopard-style background gives your DJ setup a unique and eye-catching look.

The slipmats reduce static charge, which extends the lifespan of both your records and your turntable. They are also essential for DJ techniques like scratching and backspin, as using a turntable without slipmats could damage your records.

These slipmats are made in Belgium with the highest precision and are known for their excellent craftsmanship and durable material, while offering an excellent price-performance ratio. They are delivered in a convenient double pack.

Notes: The Technics slipmats perfectly combine functionality and design. The exclusive "Technics" print in white on a black-and-white, serrated background creates a unique, eye-catching look. Especially when the slipmats spin, the patterns generate a hypnotizing effect that visually enhances the DJ setup.

The slipmats reduce static charge, which not only extends the lifespan of your records but also protects your turntable. They are also essential for special DJ techniques like scratching and backspin, which can damage your records without slipmats.

These slipmats are manufactured in Belgium with the highest precision. They are characterized by their excellent craftsmanship, durable material, and outstanding value for money. The delivery comes in a convenient double pack.

Notes: The Technics slipmats combine functionality and style at the highest level. The exclusive white "Technics" print on a black spiral background creates a stylish and unique look that perfectly complements your DJ setup - especially when the slipmat spins on the turntable.

By using the slipmats, static charge is reduced, which not only extends the lifespan of your records but also protects your turntable. They also enable special DJ techniques such as scratching and backspin, which would cause damage to your records over time without slipmats.

These slipmats are made and printed in Belgium. They impress with their excellent craftsmanship, durable material, and great value for money. The delivery comes in a convenient double pack.

Notes: This lightweight soft case has a carrying handle, shoulder strap and a padded interior to protect your Flux. It also contains a compartment for the power supple, cable and any other accessories.

Notes: Offering optimum protection for transporting and storing your Flux synthesiser, this case of coated multiplex, with aluminium edge protection and two butterfly locks. Foam padding inside for protection and multiple accessory compartments contained within.

Notes: An exact replica of the legendary Pearl SY-1 Syncussion drum machine, featuring expanded I/O board. Classic analogue sound with individual trigger inputs, two voices and six different oscillator modes per voice.

Supplier's Notes:
The Michigan Synth Works SY-1 Drum synth is a full size, exact replica of the Pearl SY-1 Syncussion. Every detail has been replicated from the original board layouts to the mechanical construction. The assembled version has been modernized to use current manufacturing processes while still using the original board layouts and all parts have been carefully chosen to match the behaviour of the original. Case, boards, and I/O Boards are all interchangeable with the original Pearl device.

Assembled versions come with the METAL back standard, the wood case is available as a DIY kit separately.

The Syncussion:

The Syncussion is a 2 voice drum synthesizer with two oscillators per voice and six different modes. Five modes mix and modulate the oscillators plus a noise channel. Each voice has controls for TUNE, DECAY, SWEEP amount, SWEEP Speed, Sweep up/off/down, LFO amount, and LFO speed, LFO Shape (Tri or Square), and sample and hold.

OSC Modes:

A: One oscillator sound, at this position the regular drum synthesizer sweep can be effected.

B. Sound of one oscillator adjusting the other oscillator frequency; produces a metallic sound.

C. Sound of a mix of two oscillator outputs; sound is similar to that of a vibraphone.

D. Sound of mix of two oscillator outputs; produces a low to high sweep and is done by hitting pad softly or hard; there is no connection to SWEEP SPEED and SWEEP RANGE

E. Sound of one oscillator adjusting the other oscillator frequency with a mix of noise; produces a sound similar to hitting thin metal.

F. Sound of only noise

Triggering:

The SY-1 is designed to be triggered via drum triggers which output a very low pulse signal. Modern 5V trigger signals (v-trig) can be used, how it i recommended experimenting with simple audio samples or more dynamic triggers. One of the more interesting features of the Syncussion is the dynamic response to the drum triggers and just sending a straight pulse which maxes out the trigger inputs does not do the device justice.

Tuning:

The original SY-1 uses a tune pedal to adjust the pitch of both oscillators while playing. This functionality has been retained in the original configuration but is of limited use without the pedal. The expanded version DOES have per voice CV control (1v/Oct) as well as the MIDI.

The inputs and outputs use 1/4" Stereo to 1/4" (3 included) to greatly expand the capabilities of the device. The Mod input is prewired to VCF freq but can easily be switched to decay via jumper on the voice cards.

The SY-1 ships with a metal base panel but the DIY wood case can be used instead. It is provided UNFINISHED and sold separately.

Whats included:

SY-1 Synthesiser

Universal Power adapter (100-240V, 12V DC out, Tip Positive)

Expanded I/O: 3x 1.5m TRS 1/4" Phone to 2x TS 1/4" Phone

Notes: ***B-STOCK: Box opened, product in perfect working order***


Use familiar gestures to easily animate the sound of your favourite hardware and software synths.

Push your favourite synths further

Press Touche to activate a filter on your hardware synth or gently bow Touche's plate to add arpeggiator action to your favourite software synth. These are 2 examples of the many possibilities Touche can interact with your gear. This standalone MIDI controller simply translates your gestures into data (MIDI, CV or USB). Touche precisely allows you to modulate any sound, from the subtlest brush to the wildest strike.

Sturdy & precise

Touche boasts a solid monoblock design with few replaceable moving parts, equipped to translate anything from the softest touch to the roughest rhythms, with pinpoint precision.

Universally compatible

Touche is compatible with any software or hardware synthesizer thanks to its built-in CV, MIDI and USB outputs. Internal memory even lets you control hardware synths without a computer.

Ready to use

Touche can control all your favourite third-party software instruments too. Pre-made mappings for all best-selling VST instruments, as well as hardware instruments, are included.

Sounds included

Touche ships with UVI Workstation, a plug-in providing over 250 custom-designed instrument sounds. These sounds come pre-mapped with Touche so you can focus on producing.

A new, tactile playing experience

Touche bypasses the traditional limitations of most synths' and MIDI controllers' keybeds, seamlessly connecting your gestures to sound. Less programming, less automation, more creativity!

4 degrees of freedom

Each direction on the control surface affects different parameters. Combine movements for amazing effects.

Capturing precision

Touche captures your movements with pinpoint precision. Record incredible performances in real time.

Get percussive

Tap your melodies rhythmically, creating percussive tones unique to the Touche family.

Hands down

Discover new ways to articulate your sounds with your keyboard and Touche working in harmony.

A powerful companion software

Meet Lie, Touche SE's control centre and companion software. Lie allows you to:

Browse easily the included sound library (+250 presets)
Host any third party plug-in and map it to Touche and Touche SE
Create mappings for hardware gear in a blink (Touche only)
Adjust Touche's sensitivity to your taste

Rediscover your favourite hardware synths

Touche includes more than 250 hardware synthesizer mapping presets - providing instant, ready-mapped control of the factory presets included with most popular synthesizers.

Rediscover your favourite plugins

A beautifully engineered hardware instrument, able to translate anything from the softest touch to the roughest rhythms, with pinpoint precision.

Extraordinary sounds included

Touche comes with a professionally-designed sound library, so you can start exploring right after installation. Explore ripping basses, soaring leads, evocative pads and pounding percussion, all pre-mapped to take full advantage of the hardware.

Expand your soundscape with Touches expansions and instruments plugins

Need more sounds? Expansions and instrument plugins are an ideal playground for Touche. Discover a whole new universe of sounds and playing articulations, fully compatible with Touche and its software companion, Lie.

Touch plate

We are all different, and your Touche can be different too. You can fully perfect your Touche's response with adjustable controls, and you can even customise its appearance with our range of alternative touch plate finishes, available separately.

Cylinder

The cylinder is the heart of the Touche - it controls exactly how your Touche reacts to pressure. The 'Shore 40 Pink Cylinder' is the classic all-rounder and is included with Touche. It's suited for a wide range of gestures, soft or hard, progressive or percussive. But for those interested in a softer or harder response, we have a range of other cylinders to try.

No computer required

Touche can operate completely standalone, controlling MIDI and CV hardware without a computer connected. Pre-prepare your perfect control mappings and select and recall them live onstage - Touche is the perfect companion for adding expression to your live rig.

Touche

USB: USB Powered
MIDI in: 1/8" (3.5mm) jack socket
MIDI out: 1/8" (3.5mm) jack socket
CV: 4 x 1/8" (3.5mm), up to -10V to 10V
Axe: 4 axes with customizable sensitivity
Lie: Lie: macOS 10.11 and higher / Windows 10, VST / AU format, hosts VST instruments only
Dimensions: 9.7" x 3.9" x 2.4" / 246 x 100 x 62 mm

Box content:
Touche
1x USB Cable
2x MIDI break-out cable (jack to DIN)
1x Ground Loop Adapter

Notes: ***B-STOCK: Box opened, product in perfect working order***


The Eris Studio 4 sets a new standard for compact studio monitors. With its surprising amount of low-end and a wide, well-controlled sweet spot, you can enjoy premium, accurate monitoring in even the smallest of mixing spaces. Designed for superior performance in both home studios and small professional mix rooms, the Eris Studio 4 combines flexible connectivity with sonic accuracy that puts it a class all its own.

The custom-designed EBM (Elliptical Boundary Modeled) waveguide provides superior high-frequency response that allows you to hear the finest details in your mix, while a wide 100-degree horizontal dispersion creates a broad sweet spot with lifelike stereo imaging. Narrow vertical dispersion reduces reflections from your desk, and a silk-dome tweeter ensures snappy, accurate transient reproduction.

The 4.5-inch, woven-composite, low-frequency driver produces tight, clear bass with plenty of punch that defies the Eris Studio 4's space-saving size. The ported enclosure and 50W of biamped power combine to maximize bass response and allow the Eris Studio 4 to reach down to an astonishing 55 Hz - without a subwoofer!

Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You'll have no problem hooking Eris speakers up to virtually anything.

Features

4.5-inch, woven-composite, low-frequency transducer
1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
100-(H) x 60-(V) EBM waveguide for wide sweet spot
Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
50W, Class AB biamplification
55 Hz to 20 kHz frequency response
100 dB SPL (Peak, @ 1 meter)
Acoustic Tuning controls: HF (+/-6 dB, continuously variable); Midrange (+/-6 dB, continuously variable), and Acoustic Space (flat, -2, -4 dB), plus highpass filter (Off, 80 Hz, 100 Hz)
RF interference, output-current limiting, over-temperature, transient, subsonic protection and amplifier "soft start" feature (eliminates popping on power-up)
Internal power supply with IEC connector and power switch with on/off LED
Balanced XLR and 14-inch inputs and unbalanced RCA inputs

Set up your studio monitors for your room.

Erisr Studio 4 active monitors are equipped with Acoustic Tuning controls to ensure the flattest response in your mix environment. You get Low Cut, Mid, and High controls, as well as three-way Acoustic Space tuning that makes it easy to compensate for the boundary bass boost that occurs when a speaker is placed too close to a wall.

Honest. Expressive. Powerful.

Like all PreSonusr studio monitors, the Erisr Studio 4 offers consistent, accurate listening. Their stylish design makes them a welcome addition to any mix space, and their smooth, incredibly even frequency response ensures that your mixes will sound great everywhere.

Specs

Electronics
Voltage: 220-240V UK
Wattage: 80 Watts
Input impedance: 10 kO

Performance
Peak SPL: 99 dB (@ 1 meter)

Speakers
Crossover frequency: 2.7 kHz

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard

Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)

Audio switches: Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Monitor inputs: 1- Balanced XLR, 1- Balanced 14" TRS, 1- Unbalanced RCA
Power amplifier type: Class AB

Measurements

Dimensions: 10.00 x 7.00 x 7.20 in

Depth: 7.28" (18.5 cm)
Height: 10" (25.4 cm)
Width: 7" (17.8 cm)

Notes: ***B-STOCK: Box opened, product in perfect working order***


Welcome to the world of sound of LYRA-8, the unique organismic analogue synthesiser designed by Vlad Kreimer. "Organismic" means that LYRA uses some principles that lie in the base of living organisms. The way how LYRA's modules interacting between each other and the behaviour of the instrument resembles a live conversation.

LYRA-8 is based on eight generators, which will be referred to as voices. Their design is not like a traditional subtractive synthesis VCO. Instead of having a linear or logarithmic dependency on control voltage, they resemble the tone generators in old electric organs. Hence the use of the term "voices" instead of "VCOs". Lyra uses non-linearity a lot, and the voices are constructed in such a way that allows for non-linearity to express itself.

The voices are divided into four pairs (12, 34, 56, 78). All the pairs are divided in two groups, with two pairs in each (1234, 5678), creating tree-like structure.

The voices can function either in an electric organ mode or in an FM synthesis mode with each of the voices and its envelope acting as a separate FM operator. The voice's impact on FM synthesis will decrease along with the decay of its envelope.

LYRA-8 also has the next blocks:

The HYPER LFO is a complex low-frequency generator, whose waveform is synthesized from two simple LFOs by summation or multiplication of their frequencies. It also has a sync mode. The LFO can modulate the selected pairs of voices and the MOD DELAY.

The MOD DELAY consists of two lines of delay with cross-feedback and a special architecture that enables resonance between the two lines. Each line's delay time can be individually modulated from various sources, including external ones. The delay has a unique possibility of self-modulation where the output signal modulates the delay sample rate, creating cool effects.

The DISTORTION is last in the chain, after the delay. It enables the delay to also influence the distortion.

For all its experimental character, LYRA is a professional instrument. Its output dynamics and frequency response are balanced and ready for a live performance or studio recording without any additional processing.

Specifications:

Max output voltage: 2 v 0-to-peak
Output connector: mono 6.3 mm TS or TRS (balanced) jack
Output resistance: 100 Ohm
EXT IN: 1 v 0-to-peak
EXT IN connector: 6.3 mm TS jack
HOLD GATE: full HOLD volume +5 V
HOLD GATE connector: 6.3 mm TS jack
CV DELAY : unipolar, range of 0 to +5 volt
CV DELAY connector: 6.3 mm TS jack
CV VOICES: unipolar, range of 0 to +5 volt
CV VOICES connector: 6.3 mm TS jack
Power supply: stabilised, +12 V, 0.2 A, centre positive
Power Consumption: 2 watt
Dimensions: 266 x 266 x 62 mm
Weight (without power supply and packaging): 2.5 kg

Notes: The LedPressor is a full stereo Diode-based compressor module.
Its unique core adds character and color to any signal passed through it.
The LedPressor can be used as a normal compressor with low input levels, but as the input volume increases and the "nuke" LED lights up, it enters a new territory that combines compressor and overdrive, creating a dynamic overdrive effect.

Get it pumping with the Side Chain
The module features an external sidechain input that accepts audio and CV signals. Only the sidechain signal passes through a high pass filter, which gives the user greater control over the sound shape. The audio signal itself is not affected by the filter.
Parallel compression
The module also includes a mix knob that can be controlled with a dedicated mix CV input, allowing for greater flexibility when blending dry and wet signals. Additionally, it features a momentary bypass button to easily adjust the levels of dry and wet signals.
Feed-Back Or Feed-Forward - it's your choice
The module can be configured with a feed-back or feed-forward topologies with a jumper in the back.
Reverse polarity protection
The module have proper reverse current and over current protection in its power input stage to protect the module in case it was connected the wrong way or connected to a faulty power supply.
Dimensions
Width
: 12HP
Depth
: 34mm
Current Draw
+12V
: 20mA
-12V
: 15mA

Notes: 
Q^Mix
4 channels CV/Audio polarising mixer
Q^Mix is a four-channel CV and audio mixer designed to take simple signals and combine them into something altogether new.
The four DC-coupled inputs feature a switch that selects between linear attenuation or bi-polar attenuversion.
Q^Mix can be used to sum simple signals to create much more complex results.
perfect for use as a final volume control when used as an audio mixer.

Technical Specifications
All inputs are DC-coupled.
Four-channel audio and CV mixer.
Logarithmic attenuation on the output stage.
Input impedance: 100k for all inputs.
Noise filtering and resettable fuses on the module's power input.
Reverse current protection.
Dimensions
Width
: 6HP
Depth
: 10mm
Current Draw
+12V
: 5mA
-12V
: 5mA

Notes: 2^VCA is a dual vca module in 1u Intellijel format.
Both of the VCA's are normlised so it can be used a stereo VCA, as a dual mono VCA , mono to stereo VCA and many more combinations.

Technical Specifications
1u Intellijel format
Noise filtering and resettable fuses on the module's power input.
Reverse current protection.
Dimensions
Width
: 12HP
Depth
: 20mm
Current Draw
+12V
: 10mA
-12V
: 10mA

Notes: S&M is a very useful utility module in 1u Intellijel format combining unity mixer and a precision active buffer.

CV and Audio Mixer
Audio grade dc-coupled unity mixer for mixing CV or Audio signals
Active Buffer/Splitter
Precision active buffer/splitter for splitting signals along your system without any signal loss (highly recommended for splitting Pitch CV).
Reverse polarity protection
The module have proper reverse current and over current protection in its power input stage to protect the module in case it was connected the wrong way or connected to a faulty power supply.
Dimensions
Width
: 12HP
Depth
: 20mm
Current Draw
+12V
: 10mA
-12V
: 10mA

Notes: The Technics Slipmats combine functionality and style in an ideal way. The exclusive white-blue "Technics" print on a circular, black-red background gives your DJ setup a unique and distinctive look.

Using the slipmats reduces static charge, which extends the lifespan of your records as well as your turntable. They also allow for special DJ techniques like scratching and backspin, which would cause long-term damage to your records without slipmats.

These slipmats are manufactured and printed in Belgium. They impress with their excellent craftsmanship, durable material, and outstanding value for money. The product is delivered in a practical twin pack.

Notes: ***B-STOCK: Original box damaged and cable is in plastic seal; product in perfect working order***

The SC16 is a high-quality USB-C to USB-C cable designed to connect RODE microphones with a USB-C output to USB-C compatible devices. Measuring 300mm long, the cable is ultra-flexible and features an in-built cable grip that is compatible with the VideoMic NTG shock mount cable management system. It is particularly suitable for connecting the VideoMic NTG to USB-C mobile devices, but will also work with any RODE device with a USB-C output, including the NT-USB Mini, Wireless GO II and RODECaster Pro.

Key Features:

High-quality shielded USB-C to USB-C patch cable
300mm (11.8") long
Junction box for cable management

Specifications

Acoustic & Electrical Specifications

Output Connection
USB Type-C
Inputs
USB Type-C

Compatible RODE Products

VideoMic NTG
NT-USB Mini
Wireless GO II
RODECaster Pro
AI-1

Mechanical Specifications

Colour: Black
Weight (g): 6
Cable Length (millimetres): 300

Box Contains: 1 x SC16

Notes: 
2^LFO
Dual Analog VC-LFO
2^LFO is a dual analog VC-LFO Eurorack module, each LFO unit consists of two outputs of square and triangle that can be used simultaneously.

From LFO to Audio-Rate
Three variable rates range from super slow modulation of 20 seconds to super fast audio-rate of 700hz.
Control the speed
CV input for external control of the modulation rate.
No light bleed
Custom made light bleed blocker to prevent indicator light to bleed to other modules.
Reverse polarity protection
The module have proper reverse current and over current protection in its power input stage to protect the module in case it was connected the wrong way or connected to a faulty power supply.
Dimensions
Width
: 4HP
Depth
: 10mm
Current Draw
+12V
: 10mA
-12V
: 10mA

Notes: Reduxer is a stereo sample reducer effect module.

Depends on it's signal, It can produce dynamic range of sounds from knurly bitcrushing to formant/vowel style effects.

Extra resolution

Custom made Redux potentiometer with 300 degrees rotation for extra crashing resolution.

Double the power

Two proprietary sample reduction circuits with extra offset control on channel 2 via the "Spread", lets you create motion in the streo field for wider effect.

Stereo operation

Inputs are normelized - supporting mono to stereo configuration.

Reduction under control

Redux CV input with attenuator for external control of the bit reduction rate.

Reverse polarity protection

The module have proper reverse current and over current protection in its power input stage to protect the module in case it was connected the wrong way or connected to a faulty power supply.

Dimensions

Width: 8HP
Depth: 20mm

Current draw

+12V: 25mA
-12V: 25mA

Notes: Not just another clone or continuation of the 808-esque, acid-style kicks of the Mutant Bassdrum - the Mutant BD9 seeks to explore uncharted bassdrum territory by having an integrated sub-oscillator for maximal auditory obliteration.

Parametric bassdrum synthesis offers creative control of the core sound

The primary analogue VCO offers classic 909-esque sinusoidal bassdrums, but can also be switched to generate a square wave bassdrum

The PITCH of the VCO spans several octaves, from about 30Hz to 240Hz, and can be modulated with voltage control

A novel PITCH DECAY circuit allows you to adjust the duration and AMOUNT of the pitch-modulation envelope applied to the bassdrum, from short blips to exaggerated tom-like sweeps

The AMPLITUDE DECAY allows adjustment of the length of the bassdrum, from short punchy kicks to massive booms. This parameter is voltage-controlled with a snappy CV response time, allowing you to modulate the duration of your kicks per step.

The CLICK generator is responsible for the attack intensity of the BD9. A fair amount of circuitry goes into creating this subtle punch at the beginning of the kick. The level of this effect is adjustable up to a fairly dramatic extremity.

The overall timbre of the BD9 varies with the DRIVE control from warm, analogue bassdrums at low settings to speaker-shattering overdriven sounds at high settings. Output levels are modular-level signals, unlike many classic line-level percussive devices.

Still not heavy enough? Try the sub-oscillator.

A square wave sub-oscillator derived from the primary oscillator's pitch can be mixed in (manually and with voltage control) to the BD9. The effect can be subtle deepness or extreme timbre changes.

A jumper on the back of the module allows you to select between the sub-osc being a raw square wave or having some of the high frequency components removed with a lowpass filter.

At high OUTPUT DRIVE and SUB LVL combinations, the sub-oscillator can be modulated with CV to saturate the BD9 output in evolving ways.

The SUB OCT can be set to 0, -1 or -2 octaves down from the primary oscillator. A drop of 0 means that you can mix an equal-pitch square wave with a sinusoidal primary wave.

Designed for the contemporary modular synthesiser

Plenty of eurorack-compatible control voltage inputs with bipolar attenuverters allow synthesis of dynamic percussion

A practical analogue trigger circuit allows activation of the BD9 from many signal sources (anything with a positive-going edge lasting 2ms or longer). Most electronic drum pads can also directly trigger the Mutant BD9.

An accent input accepts analogue voltage control (0 to 5V will fully modulate the volume from low to high)

13HP | 30mm deep
+50mA, -50mA