100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 50 of 52 on page 1 of 2
1  2  »
Cat: 621355 Rel: 28 Nov 16
 
Breakout expander for the Batumi quadruple LFO module
Notes: Poti is a simple but very useful breakout expander for the Batumi quadruple LFO module by Xaoc Devices. Its panel provides an immediate access to the Batumi functions originally selected by the cluster of jumpers on the back of the module: Reset/Sync mode option and selection of the assignable waveform.
Read more
 4 in stock $47.60
Cat: 714698 Rel: 19 Dec 18
 
Self-powered white noise generator
Notes: This cable expands every synth without a noise generator but an external audio input and a 5V source at the tip of a socket (e.g. an expression pedal input) and gives you digital noise. Initially the cable has been developed as an expansion for the Moog products Little Phatty and Minitaur but it works also with other synths etc. The Hirlostek needs to be provided with a 5V voltage, for instance at the tip of a expression pedal socket. A circuit inside of the bigger plug generates a bright digital noise you can use as audio or modulation source. The narrower plug carries the noise signal and is to be connected either with an audio input or a CV input. Hand made, military quality due to good Neutrik jacks.
Read more
 2 in stock $40.03
Cat: 714701 Rel: 19 Dec 18
 
Self-powered white noise generator
Notes: This cable expands every synth without a noise generator but an external audio input and a 5V source at the tip of a socket (e.g. an expression pedal input) and gives you digital noise. Initially the cable has been developed as an expansion for the Moog products Little Phatty and Minitaur but it works also with other synths etc. The Hirlostek needs to be provided with a 5V voltage, for instance at the tip of a expression pedal socket. A circuit inside of the bigger plug generates a bright digital noise you can use as audio or modulation source. The narrower plug carries the noise signal and is to be connected either with an audio input or a CV input. Hand made, military quality due to good Neutrik jacks.
Read more
 1 in stock $48.68
Cat: 641111 Rel: 28 Feb 17
 
Micro SD Card with 256 fresh sounds for the One sample player
Notes: PERC features 256 percussion sounds with tight attacks and a bright harmonic spectrum. This collection is specifically focused on shorter percussive samples and includes material such as multi-layer drum & percussion hits, chopped & processed loops, synthesized FM strikes, mallet and bell tones, sampled drum machines, various toms and hand drums, obscure noise boxes, sampled old-school game chips and much more. PERC makes full use of ONE's snappy character.

All samples on the card are available for playback at 48k, 64k and 96k for maximum versatility in pitch control while maintaining latencies of as low as 0.25 ms.

Design by: Glitchmachines
Type: One Shot
Character: Percussive

Only compatible with the Tiptop Audio One Digital Audio Flux Eurorack Module.
Read more
 1 in stock $27.59
Cat: 595820 Rel: 03 Aug 16
 
Links up to 3 Zeus Studio Bus boards with an external power supply - 4HP wide
Notes: Zeus Access provides a simple, fast, and cost-effective solution for linking up to three Zeus Studio Bus boards with an external Cincon-TTA brick-style power supply. It is a tethered 4HP space-saving front panel with a long lasting high power rating On/Off switch and power socket.

It comes fully assembled and wired with 16AWG wire and plated copper terminals leads that require no additional assembly or special tools for connecting to a Zeus Studio Bus board.
Read more
 1 in stock $37.33
Cat: 658619 Rel: 13 Sep 17
 
SD card for the ONE modular synth module
Notes: DOTS features 256 short/dots one shot sounds created specifically for ONE to further extend ZV_K's live Tiptop drum setup. These sounds were selected for their percussive transient response but are also great as monophonic sound sources to use alongside analog synth when sequenced. DOTS are samples of the signature sounds of Buchla, Cwejman, Mutable Instruments, Jomox, Mungo, Industrial Music Electronics (aka The Harvestman), HexInverter, Make Noise, Monomachine, Vermona, Audio Damage. Bastl, Epoch, Mungo, Delptronics as well as some human voice artefacts and even a prepared piano. Each sound was carefully selected from hours of recordings, edited but not altered to retain the original sound's qualities and dynamics and was extensively tested using the module to make sure all the sounds sound good at any setting. DOTS are very easy to fit into a mix, run through effects and are very well suited to be used and abused by a modular system.
Read more
 2 in stock $28.13
Cat: 595807 Rel: 19 Jan 16
 
3U rack ears for use as either tabletop or rack mount frame
Notes: The Z-Ears Tabletop are standard 3U rack ears that can be used as either a tabletop frame or standard rack mount frame. These parts are made of anodized aluminium and are custom made to work with Eurorack mounting rails like Z-Rails.
Read more
 1 in stock $24.89
Cat: 683513 Rel: 09 Apr 18
 
Sample library for the Tiptop Audio One by Joseph Fraioli aka Datach'i
Notes: Tiptop Audio and award winning sound designer/electronic music artist Joseph Fraioli AKA Datach'i come together in the form of the new Datach'i One card. The card, to be used exclusively in the Tiptop ONE Sample Player, contains 187 unique sounds ranging from organic recorded elements and electronic percussion to dramatic gestures, ambiences and melodic sequences. Created with field recordings, the Eurorack modular synthesizer, Symbolic Sound Kyma system and boutique electro acoustic instruments, all sounds were recorded at 24 bit/96k quality for maximum resolution in pitch control while maintaining latencies of as low as 0.25 ms.
Read more
 2 in stock $32.30
Cat: 719678 Rel: 02 Sep 19
 
Audio mixer with 4 inputs
Notes: This module consists of an audio mixer with 4 inputs and their level knobs, plus an additional 4 separate inputs that are mixed at full level (especially for mixing CV signals), and a separate output.
Read more
 1 in stock $28.40
Cat: 719694 Rel: 02 Sep 19
 
LFO module
Notes: The LFO module generates modulation voltages mostly below the audio range; this module offers:

- PWM modulation for the Pulse out
- RATE knob for controlling the frequency
- SLOW/FAST switch for two frequency ranges; with FAST the rate can go into the lower audio range
- Triangle/Sawtooth switch; changes the waveform of the output
- PULSEWIDTH knob, this sets the pulsewidth of the according output
- Control LED for sawtooth/triangle and for pulse
- Three separate output signals: Square (even duty cycle), TRIANGLE/Sawtooth, Pulse
Read more
 3 in stock $31.37
Cat: 719670 Rel: 02 Sep 19
 
Dual attack/decay envelope
Notes: 2ENV is a dual attack - decay envelope; it can be switched between full sustain (the output remains at full level as long as the GATE input is on) and zero sustain (for percussive envelopes). Another switch (SLOW/FAST) allows selecting the time range.

For manual triggering there is a button for each envelope.

CV control: Both attack and decay time can be CV controlled; the CV "multiplies" the time by 1...approx. 8 times.
Read more
 2 in stock $45.44
Cat: 719685 Rel: 02 Sep 19
 
Lowpass gate module for AE modular
Notes: The LOPAG is the lowpass gate module for AE. It is based on a Vactrol (like all good lowpass gates) and has two inputs: IN (audio signal) and TRIG. A pulse on the TRIG input opens the signal path shortly and via the characteristics of the Vactrol the audio signal is filtered and attenuated in a plucked, percussive way. Additional GATE and CV inputs allow more control over the way the module works.
Read more
 2 in stock $38.14
Cat: 719658 Rel: 02 Sep 19
 
Stereo headphone amplifier
Notes: A stereo headphone amplifier for AE modular.

It has separate left/right inputs; via a switch it can be set to mono operation (only left input is used). One common volume control for both outputs.

Two headphones can be attached via 3.5mm stereo minijack sockets.
Read more
 2 in stock $37.86
Cat: 719659 Rel: 02 Sep 19
 
Mono delay module
Notes: This module is a standard mono delay with the usual parameters:

- Delay time
- Feedback
- Dry/wet mix

It sounds not as clean and polished as a usual digital delay but has quite a character on its own. High feedback settings allow endless and distorting loops.

(For the techies: It is based on the well-known PT2399 chip.)
Read more
 1 in stock $39.50
Cat: 719665 Rel: 02 Sep 19
 
Sample & Hold module
Notes: The purpose of the SAMPLE&HOLD module is to "freeze" the input voltage with a trigger input.

Typically used for random CV patterns if a noise signal is fed to the input and triggered e.g. by an LFO.
Read more
 2 in stock $29.76
Cat: 719689 Rel: 02 Sep 19
 
Versatile mixer/quadattenuator
Notes: 4ATTMIX offers four input channels which can be level controlled / attenuated by the corresponding knobs. The attenuated signals are sent to four outputs.

Additionally, each channel can be sent to an internal mixer by the switches beside the knobs. The mix signal is then sent to the mix output.

An additional switch selects the general operation mode for the mixer, for DC/CV signals or for audio signals.
Read more
 2 in stock $36.78
Cat: 719693 Rel: 02 Sep 19
 
Classic VCO for AE modular
Notes: The VCO module is a "classic" VCO featuring:

- Two CV inputs 1V/octave
- MODulation input with Level-knob, switchable to frequency or pulsewidth
- PWM input
- Coarse/Fine knob for frequency
- Pulsewidth knob for squarewave
- Square/Triangle/Sawtooth output

The module works well if you need an oscillator for primary musical/melodic use.
Read more
 1 in stock $40.03
Cat: 719668 Rel: 03 Sep 19
 
Dual voltage controlled amplifier module
Notes: 2VCA contains two separate VCA (voltage controlled amplifiers); the classic module to shape the volume of a sound that is fed to IN by a control voltage, e.g. from an ENV to the CV input.

A switch determines the operation mode (DC/CV or audio), choosing the right position can reduce/avoid pop's with short attack envelopes.

An additional knob for each VCA attenuates the level, if necessary.
Read more
 2 in stock $31.37
Cat: 719661 Rel: 02 Sep 19
 
Binary divider for incoming signals
Notes: A binary divider for incoming signals. It can be used either for dividing clock signals (e.g. from an LFO, BEATDIVIDER) by 2 / 4 / 8... 128 for rhythmical purposes but also for audio signals - in this case you get subharmonics/lower octaves squarewaves at the outputs, which can be mixed or used separately.

The reset input resets all output signals; in case of audio signals this can get quite unique, ringmodulator-like sounds.
Read more
 2 in stock $37.86
Cat: 719682 Rel: 02 Sep 19
 
Dual NAND, AND, XOR inverter
Notes: The LOGIC module combines two inputs by different logical rules (AND, NAND, XOR). This can be used either for operations on trigger/gate signals (let gate signals pass depending on other signals, invert them depending on the other input etc), or for audio signals, where you get ringmodulator-like sounds when feeding two different oscillator frequencies.
Read more
 1 in stock $25.70
Cat: 719673 Rel: 02 Sep 19
 
Clock divider module
Notes: The BEAT DIVIDER takes a clock signal (the BUS CLK which presents the MIDI clock from the MASTER module) and divides it to musical clock dividers, selectable from 1/2... 1/32.

Additionally, a second output provides the dotted or triplet clock of the selected divider value.
Read more
 1 in stock $28.40
Cat: 719663 Rel: 02 Sep 19
 
Dual audio & CV level attenuator
Notes: 2ATT/CV contains two units of a simple level attenuator for any kind of signal. You can also switch to voltage mode and get manually controllable CV on the outputs.
Read more
 1 in stock $29.76
Cat: 719656 Rel: 03 Sep 19
 
State variable filter
Notes: This module is a classic state variable filter.

It offers the control knobs cut-off frequency, resonance and CV attenuator; two signal inputs for different signal levels control the "drive" of the module. Compared to the wasp filter, this module has a significant self-resonance, and also a very quick response to cut-off frequency changes.

Three different outputs provide lowpass, bandpass and high-pass output.
Read more
 1 in stock $37.86
Cat: 719657 Rel: 02 Sep 19
 
Filter module
Notes: This filter module is a variant of the Wasp filter, a quite strange circuit used first in the EDP Wasp synth end of the seventies, which abuses digital chips in an analogue way leading to the characteristic sound of this filter type. In this module, vactrols are used for controlling the filter frequency.
Read more
 2 in stock $38.94
Cat: 719687 Rel: 02 Sep 19
 
4 minijack inputs/outputs
Notes: 4I/O offers four minijack sockets that are connected to the AE sockets for connecting external audio sources, CV's and Eurorack modules. Sockets 1 and 3 are stereo sockets; if a stereo cable is inserted here the signal is available on sockets 1/2 and 3/4. With mono cables the four sockets can be used independently.

All sockets have an overvoltage protection (as AE modular is limited to 5V) and can be switched between audio and DC/CV signals.
Read more
 2 in stock $39.50
Cat: 719701 Rel: 02 Sep 19
 
Dual hybrid oscillator
Notes: The 2OSC/d module contains two 1V/octave hybrid oscillators. Each of them features:

- One frequency knob plus a range switch +2 octaves
- CV input (1V / octave)
- PWM input
- SYNC input
- Sawtooth/Square/Sub-octave output

The pulsewith knob controls either the pulsewidth of the first oscillator (with the second one having a fixed pulsewidth), or via a switch the second oscillator is also controlled by the pulsewidth knob. Both oscillators can be pulsewidth-modulated independently by their PWM inputs.

The module is designed as a hybrid digital/analogue module; the oscillator frequencies are determined digitally and are therefore quite stable and have a good tracking; the output wavefom itself is created analogue. It's a new idea/concept that I have implemented here; the design causes the waveform to get a bit gritty at higher frequencies (but not "digital noise") - it's the character of this thing!
Read more
 2 in stock $47.60
Cat: 719686 Rel: 02 Sep 19
 
Classic wavefolder for the AE system
Notes: This module is based on a design used also by Ken Stone for his CGS system; the original circuit dates back to a publication from 1973.

Basically, the WAVEFOLDER clips and folds the incoming waveform; usually, waveforms with little overtones (like triangle or sinewaves) are used as input. In general, by the clipping and folding, the signal enriches the input signal with more overtones.
Read more
 1 in stock $35.17
Cat: 641958 Rel: 28 Feb 17
 
2HP splitter module for stereo signals into mono
Notes: Quantic Fictus is a simple 2HP splitter for stereo signals into mono. It was built specifically to interface with the Keith McMillan Qu-Nexus but can be used for any sort of stereo interfacing. It is passive so can also be used to combine mono signals into stereo.

Size: 2HP Eurorack
Depth: 1 Inch
Power: None
Read more
 1 in stock $36.25
Cat: 689037 Rel: 19 Jun 18
 
Front panel for the Koma Elektronik Field Kit FX
Notes: Use this panel to mount your Field Kit FX in your Eurorack System.

Please note: This only includes the Eurorack Panel, NOT the full Field Kit FX.
Read more
 2 in stock $33.53
Cat: 689041 Rel: 19 Jun 18
 
Front panel for the Koma Elektronik Field Kit
Notes: Use this panel to mount your Field Kit in your Eurorack System.

Please note: This only includes the Eurorack Panel, NOT the full Field Kit.
Read more
 2 in stock $32.45
Cat: 563665 Rel: 11 Mar 15
 
Passive multiple synth module, 2HP wide
Notes: Dual 4-way passive mult (one audio or cv signal in with multiple unbuffered outputs)

On the back of the pcb is a pair of solder points marked as "link". You can connect these (with a solder blob or small jumper wire) to turn the mult into a single 8 channel Mult instead of 2 x 4 channel.
Read more
 5 in stock $31.92
Cat: 607334 Rel: 04 Apr 16
 
TRS jacks for the Audio I/O interface in 1U module - 16HP wide
Notes: TRS jacks for the Audio I/O interface in 1U.

You need this module for the Audio I/O 1U

This module is not needed if you have the 7U performance case that comes with rear mounted audio i/o jacks.
Read more
 1 in stock $24.88
Cat: 673902 Rel: 12 Jan 18
 
1/4" TS jack interface for the Pedal I/O 1U system - 8HP
Notes: The Pedal I/O JACKS 1U Module allows you to patch standard 1/4? TS cables to and from your guitar/instrument pedals.

This module only works when connected to a Pedal I/O 1U module via ribbon cable.
Read more
$23.26 SAVE 10%
 7 in stock $20.94
Cat: 673911 Rel: 15 Jan 18
 
Balanced TRS 1/4" input path to Eurorack modular signal level
Notes: This module allows you to connect balanced line level audio (+4 dBu) into your Eurorack modular system. It is a compact and easy way to patch in a rack mount/desktop FX units, external line-level instruments like synths and drum machines, outputs from your DAW, or many other line level sources.
Read more
 1 in stock $41.66
Cat: 643380 Rel: 27 Mar 17
 
Buffered multiple module in 1U
Notes: Dual 1 x 4 buffered mult (one audio or cv signal in with multiple buffered outputs).

The output of the first mult is normalled to the input of the second mult to create a 1×8 buffered mult.
Read more
 5 in stock $41.66
Cat: 674886 Rel: 15 Feb 18
 
Eurorack buffer board
Notes: Active buffer board for the MTX9. Presents unity mixing and buffered splitting. Supplied with all necessary cabling and hardware.
Read more
 1 in stock $49.77
Cat: 738521 Rel: 22 Jul 19
 
4HP PSU connection module
Notes: If you decide to use rack ears to mount Erica Synths 84HP enclosure in the studio rack, you may want to access the PSU connection from the front of the case, instead of the top. The 4HP PSU connection module is the solution. PSU Input module is intended to be used with external PSUs which provide an output voltage from +9V to +12V ("+" in the centre).

For two row Eurorack enclosures (2x84HP), use a small screwdriver to disconnect the existing PSU connector from the blue terminal and connect the PSU connector module as shown on the photo.

For one row Eurorack enclosures (1x84HP), you will need a soldering iron to solder wires from the PSU connector module as shown on the photo. Make sure soldered wires do not touch the aluminium enclosure!
Read more
 2 in stock $20.02
Cat: 686691 Rel: 27 Apr 18
 
Companion board for uploading your samples to Pico Drums
Notes: If you wish to upload your own drum samples to Pico Drum module, you'll need the Pico Drum Programmer. Please refer to the Pico Drum user manual for sample upload instructions via a plug in for the Google Chrome browser.

- 5 pin header connects with the module, USB header connects with the computer
- USB cable is not included
Read more
 1 in stock $26.02
Cat: 577786 Rel: 06 Jun 19
 
Multi-connector module - 4HP
Notes: Modules A-180-1 and A-180-2 are simple multi-connectors. They have eight inter-connected sockets, so that you can "multiply" any audio or control signal. From the factory the modules come as two four-fold multiples. But they can be modified as an eight-fold multiple (solder bridge on the pcb). Though these modules are very "primitive" they are required very often in patches (e.g. to distribute a clock signal or a control voltage). Within a big A-100 system sufficient multiples should be planned. The function of A-180-1 and A-180-2 is the same. The modules differ only in the front panel width.

For the distribution of control voltages used for pitch control of several VCOs the buffered multiple A-185-2 is recommended. This module has a built in buffer (and a lot of additional features like CV summing) that avoids small voltage losses that may be heard in pitch control applications.
Read more
 1 in stock $37.40
FORTHCOMING
Doepfer A-180-2v Multiples Module (vintage edition) Doepfer A-180-2v Multiples Module (vintage edition) Doepfer A-180-2v Multiples Module (vintage edition)
Cat: 751717 Rel: 23 Oct 19
 
Passive multi-port distributor - 2HP
Notes: 2HP narrow version of the A-180 multiples module. It is a passive signal splitter suitable for audio or CVs. Two sets of four jacks are interconnected, by placing a solder bridge you can connect all eight jacks.
Read more
coming soon $38.41
FORTHCOMING
Doepfer A-183-1 Dual Attenuator Module Doepfer A-183-1 Dual Attenuator Module Doepfer A-183-1 Dual Attenuator Module
Cat: 751728 Rel: 23 Oct 19
 
Dual passive attenuator - 4HP
Notes: Module A-183-1 is a simple passive dual attenuator. Passive means, that each unit is made of two sockets and a 50k linear potentiometer only. There are no active parts like amplifiers or buffers and no power supply is required.

This is how the A-183-1 works: At the output socket appears the attenuated input signal, i.e. zero level at the fully CCW position and max. level and the fully CW position.

Applications:

Adjustable level of CV or audio signals to control other modules that do not have attenuators (e.g. Dual VCA A-132-1, Quantizer A-156, CV-to-Midi interface A-192 and modules of other manufacturers).
Read more
coming soon $40.04
FORTHCOMING
Doepfer A-186-1 Gate & Trigger Combiner & Rectifier Module Doepfer A-186-1 Gate & Trigger Combiner & Rectifier Module Doepfer A-186-1 Gate & Trigger Combiner & Rectifier Module
Cat: 751765 Rel: 23 Oct 19
 
Gate/trigger combiner - 4HP
Notes: Module A-186-1 is a very simple, passive unit that combines up to 7 gate, trigger or analog signals by or-wiring.

Function:

- If all seven inputs are low or open the output is low
- If one or more of the seven inputs is "high" the output turns high

Applications:

- Combination ("or"-wiring) of gate and/or trigger signals (e.g. from LFOs, sequencers, keyboards, Midi-to-CV interfaces, ribbon controller, theremin, trigger delays or any other source of gate/trigger signals
- Maximum extractor for analog voltages: at the output the maximum voltage (minus ~ 0.7V because of the diodes) appears, similar function as the maximum output of the A-172 Maximum/Minimum Selector module, e.g. for simple waveshaping
- Simple half-wave rectifier
Read more
coming soon $45.45
FORTHCOMING
Doepfer A-183-2 Voltage Offset Generator & Attenuator/Polarizer Module Doepfer A-183-2 Voltage Offset Generator & Attenuator/Polarizer Module Doepfer A-183-2 Voltage Offset Generator & Attenuator/Polarizer Module
Cat: 751731 Rel: 23 Oct 19
 
Compact module for attenuating control voltage signals - 4HP
Notes: Module A-183-2 is a voltage offset generator combined with an attenuator/polarizer.

This is how the A-183-2 works: At the two output sockets (simply two connected sockets) appears a DC voltage that is adjusted with the Offset control in the range 0...+5V or -5V...+5V. An internal jumper is used to select the offset range (0...+5V or -5V...+5V). Other ranges are possible by changing a resistor on the pc board (e.g. 0...+10V or -10V...+10V). The DC voltage generated by the Offset control is overlaid by the attenuated voltage that is fed to the In socket. The function of the attenuator control can be set to Attenuator or Polarizer by means of a toggle switch. When the switch is in the Attenuator position the control works as an usual attenuator, i.e. zero level at the fully CCW position and max. level and the fully CW position. When the switch is in the Polarizer position the control works as a polarizer, i.e. zero level appears at the centre position. Right from the centre position the In signal is added to the offset voltage, left from the centre position the In signal is subtracted from the offset voltage. In other words: at the fully CW position the non-inverted In signal is added with the full level to the offset voltage, at the fully CCW position the inverted In signal is added with the full level to the offset voltage.

The amplification range for the input is about 0...+1 in the attenuator mode, and -1...+1 in the polarizer mode. The amplification range can be modified by replacing a resistor by another value.

Applications:

Generation of adjustable DC voltages overlaid by control voltages with adjustable level and polarity to control other modules that do not have attenuators or offset controls, e.g. Sampler A-112 (mainly for the wavetable mode), dual VCA A-132-1, VCLFO A-147-2 for waveshaping and ring modulator applications, Quantizer A-156, Theremin A-178, CV-to-Midi interface A-192 and modules of other manufacturers).
Read more
coming soon $45.45
FORTHCOMING
Doepfer A-183-3 Amplifier Module Doepfer A-183-3 Amplifier Module Doepfer A-183-3 Amplifier Module
Cat: 751740 Rel: 23 Oct 19
 
DC coupled amplifier - 4HP
Notes: Module A-183-3 is a simple amplifier. It is DC coupled and can be used for both CV and audio signals. The maximal amplification can be switched between 1, 2 and 4 (in position 1 the module does not work as a real amplifier but only as attenuator). The level can be adjusted by means of the Level control between zero and the chosen maximum amplification (1/2/4). Two overload LEDs indicate if the output signal goes beyond about +10V or becomes less than about -10V. Input and output are equipped with miniature 2-fold multiples (nothing but 2 connected sockets).

The main application of this module is to adapt differing audio or CV levels between different modules or systems. For example, LFO, ADSR or Gate levels between modules of different manufacturers can be increased or attenuated. But even audio signals can be attenuated or amplified up to 4. But the module cannot be used as an amplifier for external low level audio signals (e.g. microphones or electric guitars)!
Read more
coming soon $44.37
FORTHCOMING
Doepfer A-180-3 Dual Buffered Multiple Module Doepfer A-180-3 Dual Buffered Multiple Module Doepfer A-180-3 Dual Buffered Multiple Module
Cat: 751720 Rel: 23 Oct 19
 
Dual buffered 1-in-3 multiple module - 4HP
Notes: Module A-180-3 is a dual buffered 1-in-3 multiple. The signal applied to the input socket appears as a buffered signal at the three output sockets. Each output has its own buffer, i.e. the three output sockets are not simply connected to each other. The lower output of the upper unit is normalled in the factory to the input of the lower unit. That way the module works as a single 1-in-6 buffered multiple provided that no signal is applied to the input of the lower unit. But it's also possible to pick-up the bus CV and normalize the input socket of the lower unit to the bus CV.

Application: copying/buffering of CV, gate and audio signals.
Read more
coming soon $49.78
FORTHCOMING
Doepfer A-181 Multiples 2 Module Doepfer A-181 Multiples 2 Module Doepfer A-181 Multiples 2 Module
Cat: 751722 Rel: 23 Oct 19
 
Two multiples with one 1/4 jack socket & two 3.5mm jack sockets each
Notes: Doepfer's A-181 Multiples 2 is a simple multiple and cable format converter, suitable for translating 1/4" signals to 1/8" and vice versa. The upper mult is wired for monophonic signals, while the lower mult features a 1/4" stereo connector which offers direct 1/8" connection to the tip and ring, respectively, allowing use as a stereo splitter or dual 1/8" to stereo 1/4" converter.
Read more
coming soon $45.45
Cat: 577779 Rel: 14 Jun 19
 
Passive multi-port distributor - 2HP
Notes: 2HP narrow version of the A-180 multiples module. It is a passive signal splitter suitable for audio or CVs. Two sets of four jacks are interconnected, by placing a solder bridge you can connect all eight jacks.
Read more
 1 in stock $36.31
Cat: 731947 Rel: 10 Jun 19
 
Compact 4-channel mixer - 4HP
Notes: Module A-138n is a simple four channel mixer, which can be used with either control voltages or audio signals. Each of the four inputs has an attenuator available. The output is twice available (two sockets, hard-wired like a multiple).

The module is the slim version of module A-138a and offers nearly the same features. But the distances between the controls are smaller and rubberized small-sized knobs are used. In return the front panel has 4 HP only which is half the width of the A-138a. The module is primarily planned for applications where only limited space is available. The only functional difference compared to the A-138a is the missing attenuator for the (dual) output.
Read more
 2 in stock $48.42
FORTHCOMING
4ms Pod 32 Beta Unpowered Eurorack Module Enclosure Case
coming soon $26.78
2hp
Cat: 635863 Rel: 30 Dec 16
 
2 channel passive attenuator
Notes: Trim is a 2 channel passive attenuator. It features two individual channels of attenuation.
Read more
 1 in stock $40.58
Items 1 to 50 of 52 on page 1 of 2
1  2  »

Filter

Saved Searches
Save current search
Release Date
Featured
Close