Search dance music

Notes: Polytip is Tiptop Audio's new type of modular synthesiser patch cable that can pass multiple audio channels using minimal panel space. This innovative design finally adds to modular the capability to patch more than one signal at a time and unleash the full potential of polyphonic patching between modules. Polytips uses the industry standard USB Type C connector although it is not a USB cable (and USB cables do not work with Polytip). Internally multiple lines of shielded analogue audio lines pass from end to end with excellent sound quality.

Notes: Polytip is Tiptop Audio's new type of modular synthesiser patch cable that can pass multiple audio channels using minimal panel space. This innovative design finally adds to modular the capability to patch more than one signal at a time and unleash the full potential of polyphonic patching between modules. Polytips uses the industry standard USB Type C connector although it is not a USB cable (and USB cables do not work with Polytip). Internally multiple lines of shielded analogue audio lines pass from end to end with excellent sound quality.

Notes: 2x66HP Aluminum Eurorack case

Inbuilt M3 Threads

PCB with 20 Power Sockets

Inbuild Power Supply +1A/-1A/+0,5A

ON/OFF Switch and Mini USB Power source (5V)

STORMBAG Case inclusive Shoulder Strap and Handle

Laptop stand with six heights

Power Wall with interchangeable Power Adaptors (UK/US/EU)

Size: 41cm x 32cm x 6cm (Bag), 35cm x 28,5cm x 3,5cm (Case)

Weight: 2kg (alltogether) / 1,1kg (case)

Notes: Blank panel, 4HP, constructed from anodised aluminium, silver.

Notes: 3,5mm TRS to male DIN 5

150cm length

Notes: Blank panel, 8HP, constructed from anodised aluminium, silver.

Notes: Flying Bus (male pin) are passive power distribution cables that work with the Row Power to distribute power to your modules.

Can be daisy-chained if extra headers are needed. One 14" flying bus cables with 7 male header pins.

Notes: Knurlies are the first screws specially designed for Eurorack - engineered with love by Befaco to make re-arranging your case a matter of minutes!

Knurlies can be fastened by hand, phillips, slot or allen, and include plastic washers to avoid rack-rash.

These screws are M3x7mm, so they can also be used on 3mm thick panels as well as regular 2mm ones.

Notes: Right angle 2.1mm barrel plug (5.5mm outer diameter, positive tip). Short barrel to barrel cable for daisy-chaining Row Powers and/or Pods. Cable is 11" long (centre of tip to centre of tip), suitable for two Pods next to each other or in front/behind each other. Also compatible with Row Power modules.

Both ends of the cable have a right-angle plug.

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Standard Eurorack power cable.

Use the 10-16 variant for most modules. 16-16 is for modules that use the internal +5V rail.

Length: 25CM (9.8")

Notes: These cables are designed to interconnect pro audio gear with unbalanced mini phone jacks. They are ideal for use with modular synthesizers and sound modules.

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility

Connectors: 3.5 mm TS to Same
Conductor: 26 AWG OFC
Shield: 85% OFC Spiral
Quantity: 8 pc

Notes: Custom ALM patch cables. Small but strong, they are designed for maximum ergonomic post modern wiggling.

- 60cm (Pack of 5 + ALM branded tie)
- Colour: Purple

Notes: 10-conductor ribbon cable with three 10-pin connectors and a 16-pin connector on one end (20" total length), for connecting more than 2 modules in a Pod.

Notes: 4ms blank panel - 2HP width. Black coloured PCB material with 4ms logo.

Notes: 4ms blank panel - 8HP width. Black coloured PCB material with 4ms logo.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: 3,5mm TRS to male DIN 5

150cm length

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod64X is 64HP with 2.16" (55mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick, or a barrel cable to daisy-chain to a Pod or Row Power that's already powered.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered)

Each Pod64X typically will house up to six modules, but more can be accommodated using a multi-power cable accessory.

Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy- chain with the 4ms Row Power system making them a convenient outboard mini-skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

64 HP of Eurorack modular space
Extra room for deep modules
Standard M3 threaded holes
100% lightweight anodized aluminum
Built-in Power supply
Red, White, and Blue LED power indicators

Includes:

64HP Pod, black anodized aluminum
Built-in power supply with six Eurorack power headers
Extra deep (2.16"/55mm) fits virtually every Eurorack module
M3 x 8mm pan-head screws, stainless steel (20)
Adhesive rubber feet (4)
Does not include barrel cable or power brick
Power Supply:

Four 16-pin Eurorack power shrouded headers
+12V max 1.4A
-12V max 0.67A
+5V max 1.0A
Power input: Two barrel jacks for daisy-chaining
15V-20VDC, 2.1mm positive tip
Exterior dimensions:
Width: 329.7mm (12.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 64HP
Weight:
0.5 kg = 17 oz

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod20 is 20HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Blank panel, 42HP, constructed from anodised aluminium, silver.

Notes: These PVC patch cables feature multi strand, oxygen free copper wire with a custom compact barrel. Thicker than your average patch cable with extra shielding for less interference and clearer signals. A standard for all EuroRack systems.

Features:

Quality nickel plated 3.5mm Mono TS male connection
Slim connector barrel
Reliable and robust, designed to be easy to patch
Cables built to high specification 28awg *1C
High density oxygen free spiral copper shielded wire for smoothest signal transfer
Planet friendly recyclable cable
Pack of 5 cables

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: Three units of Befaco's Y splitter cable. Stereo jack 3.5mm plug to 2x mono jack 3.5mm sockets. Black and red colour. 10cms.

Notes: Blank panel for Intellijel 1U spaces. Made from high quality brushed aluminium that matches the 1U modules.

These can also be used for DIY purposes if you drill/mill them to fit your own custom circuits.

Comes with 2 screws.

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: 7U x 104HP Gig Bag

Sized to perfectly fit the 7U x 104HP Performance Cases.

The padded main compartment protects your case from bumps and scratches

Waterproof zippers

Outer pocket for stuffing accessories and other gear (great for adding the Intellijel Pouch filled with cables and hubs)

The rear pocket closes with velcro at top but unzips at the bottom to become a handle sheath so your case can sit on top of a rolling suitcase.

Rugged strap connectors with clipped strap

Carry handles

Lightweight

Notes: Looking to expand your Lunchbox? Look no further! 2hp's Flying Bus Cable is the perfect addition to your ever expanding modular meal. Carrying 8 power slots, expanding your system is a breeze by simply inserting the Flying Bus cable into the extra slot of your Lunchbox power. Did somebody say seconds?!

Flying Bus Cable

8 Slots

Malleable for easy cable management

Double your Lunchbox's modular possibilities

Notes: Break out MIDI signals into a 3.5mm stereo jack.

- Tip = Pin 4 (Source)
- Ring = Pin 5 (Sink)
- Sleeve = Pin 2 (Shield)

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod34X is 34HP wide and has extra room to fit even the deepest modules (2.16" / 55mm of available module depth). The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

This Pod requires a power brick (not included).

Or, if you already have a Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain power supplies.

Pods are a perfect way to get started in Eurorack, or add a couple more modules to your monster system!

Made from 100% anodized aluminum, Pods are light, tough and perfect for on-the-go set ups. The power supply can handle up to 1.4A of +12V, which is plenty of juice for even the most modern digital modules. (Or if you prefer to DIY your power supply, Pods are also available unpowered)

Each Pod typically will house one or two modules, but three or more can be accommodated using a multi-power cable accessory.

Mix and match your Pods with desktop synths, effect pedals, drum machines or any musical gear for a flexible modular system. Pods can even daisy- chain with the 4ms Row Power system making them a convenient outboard mini-skiff. Need to add another module? Just add a Pod! Need to pack light for a live set? Just grab the Pods you need and go!

Basic Features:

34 HP Eurorack modular space
Standard M3 threaded holes
100% lightweight anodized aluminum
Built-in Power supply
Red, White, and Blue LED power indicators

Includes:
34HP Pod, black anodized aluminum
Extra deep (2.16"/55mm) fits virtually every Eurorack module
Built-in power supply with four Eurorack power headers
M3 x 8mm pan-head screws, stainless steel (10)
Adhesive rubber feet (4)
Does not include barrel cable or power brick
Power Supply:
Four 16-pin Eurorack power shrouded headers
+12V max 1.4A
-12V max 0.65A
+5V max 1.0A
Power input: Two barrel jacks for daisy-chaining
15V-20VDC, 2.1mm positive tip
Exterior dimensions:
Width: 177.3mm (6.98")
Height: 159.5mm (6.28")
Depth: 57mm (2.24")
Interior dimensions:
Max module depth: 55mm (2.16")
Module width: 34HP
Weight:
0.3 kg = 10 oz

Notes: Custom ALM patch cables. Small but strong, they are designed for maximum ergonomic post modern wiggling.

- 15cm (Pack of 5)
- Colour: Yellow

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: The microZEUS is a 4HP power supply module for Eurorack format synthesizers. It is the smallest and most powerful power supply available for its size.

uZEUS with flying bus boards: this version features two ribbon bus boards. All you have to do is plug in your modules and play.

The uZEUS mixes linear and switching power technology to produce 1000mA at +12V, 500mA at -12V, and 170mA at +5V and uses a standard +15VDC non-regulated wall adapter for power.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod60 is 60HP with 1.34" (34mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod60 includes twenty (20) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod26 is 26HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod26 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Qu-Splitter is a 1 input to 5 output cable hub for splitting signals. These are a great alternative to mult modules as they live outside of your case and take up 0HP. Very useful for common signals like master clock, modulation sources, or even to chain multiple cables together for long reach patching!

- 1 input to 5 outputs
- 0Passive mult
- Great for common signals like master clock, and modulation sources
- Connect two cables together for long reaches
- Color: Black with white artwork

Notes: The Pod48X is 48HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod48X includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Bananuts are anodized aluminium custom minijack nuts, following Buchla/Serge colouring code: Blue, purple, red, orange, yellow, white, green and black. Perfect lovely thingies to pimp your modular, code your inputs and outputs with colours or just give a touch of beauty to your favourite gear!

Notes: Custom wrench for 3.5mm jacks, designed for Bananuts or other slotted round 3.5mm nuts.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audior that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables