Search dance music

Notes: Developed in the UK by DJ's, Record Collectors & Vinyl Enthusiasts.

Near Mint has been specially blended to make sure your vinyl is cleaned to the highest standard. Using a greater percentage of integral ingredients and purified chemicals, Near Mint can offer the best results in cleanliness, ensuring no residue remains on your record.

Near Mint is the most effective, chemically balanced & hard hitting record cleaning solution on the market to date boasting a double strength attitude.

Notes: The Milty Pro Zerostat 3 is effective at neutralizing static charges on virtually any surface without the need of sprays.

The Zerostat 3 is highly rated for its ability to improve the sound quality of records and CDs by removing static. The Zerostat 3 incorporates a unique Piezo Crystal device which generates a positive electrical charge of Ions with a gentle squeeze of the trigger, and a negative charge on the material. Constructed from a durable hard plastic, it requires no batteries or refills and is a long lasting alternative to cleaning brushes.

Notes: This kit includes:

Microfiber fabric covered cleaning pad. Generous size: 5" x 3.5" x 1.5". Highly absorbent and grime removing fabric. Easy to use to clean records. Easy to wash when it gets dirty.

G2 High Tech Record Cleaning Fluid in 4 oz Mist Spray. More than 500 mist sprays to clean a lot of records!

SC1 Stylus Brush. 4.6 inch long curved handle with soft, fine nylon bristles remove lint and gunk from the stylus and underside of the cartridge. The best stylus brush on the market.

SC1 Stylus Cleaning Fluid. Low alcohol with technical surfactants to dissolve sticky gunk from the stylus, so the SC1 Brush can remove it. A delicate method that will do no harm to the stylus or cantilever.

Record label protector mask. Apply to the record label to keep it dry while mist spraying the G2 Fluid on the record.

Notes: Drain the static charge from your records and lift any residual dust and grime with the anti-static vinyl brush.
The conductivity of the brush's carbon fibre bristles eliminates static charges while gently and efficiently removing the dust, grit and particles that bung up your vinyl's grooves and degrade your record's sound.
The conductive carbon fibres reach deep into the grooves of your vinyl to remove even the smallest particles, leaving your records clean while prolonging the life of vinyl and stylus.

- Hand-made carbon hair brush for removing dust from vinyl records
- The brush makes the record antistatic so it does not attract dust
- For those who care for their collection of vintage or brand new vinyl records
- Can also be used for Schellack records

Notes: Complete Vinyl Cleaning Kit:

Record Brush & Stylus Gel

Keep your vinyl records and your record player in top form with this premium album-cleaning kit from Big Fudge Vinyl. The kit includes a record brush and stylus cleaning gel, so you can continue enjoying your favorite music with flawless performance.

A Truly Static-Free Vinyl Cleaning Brush

This kit includes a no-scratch, record-cleaning brush made with premium carbon fiber to eliminate static charges from your records. Less static means less dust and fewer unwanted particles, so you can get the maximum life from your records and enjoy better audio quality.

The soft-bristled vinyl brush cleaner is gentle on vinyl, and it includes a protective cover to prevent dust accumulation. Just gently grip the ribbed handle and slide the brush along the surface of your record. It's incredibly simple.

A Stylus Gel to Ensure Flawless Performance

In addition to the record brush, Big Fudge has also developed a one-of-a-kind cleaning gel for your record player needle that's simple, gentle, and extremely effective. Just lower the tonearm into the gel to eliminate dust from your needle and improve the sound quality of your vinyl records. Our stylus gel is non-toxic and has been extensively tested to ensure total safety and maximum results.

Notes: The elegance and luxury feel of real American hardwood that cannot be matched. GrooveWasher's handcrafted Walnut Record Cleaning Kit cleans your vinyl records with beauty, style and ease.

This bundle includes:

Solid milled 5 inch American Walnut handle with a hand rubbed waterproof oil polyurethane finish
Replaceable Microfiber Cleaning Pad. Easy removal for cleaning or replacement.
G2 Record Cleaning Fluid Mist Spray (4 oz)
Record Label Protector Mask

"I have been using this cleaner since it was released...the results are amazing! This is a must for any record collector and would recommend this to anyone looking for the best way to clean their vinyl records! GrooveWasher...or nothing for me!" Christopher Burns

"Hands down, the best record cleaner on the market." Levi E.

"If you enjoy music from a physical medium, you must take care of it." Alex Chase

GrooveWasher Solid Walnut Wood Handle Design

The GrooveWasher walnut handle is milled from a single solid piece of midwest premium American Black Walnut, hand finished by wood artisans with waterproof oil polyurethane in Groovewasher's plant in Kansas City, Missouri, USA. Feel the woodgrain!

NOTE: Every one of Groovewasher's walnut products is unique. Some may have small surface cracks, splits or knots. This is the character of the wood, not a craftsman's mistake.

G2 Record Cleaning Fluid

The GrooveWasher G2 Record Cleaning Fluid is the result of years of research and testing. The selection of ingredients was guided by the formulations of the D series fluids of the 1970s. G2 Fluid is designed for maximum cleaning effectiveness of the delicate vinyl surface and microgroove, without the need for rinsing. Anti-static action on contact. Honest cleaning to release the honest sound of the recording.

High Tech G2 Fluid Contains:

Surfactants: State of the art detergents dissolve and suspend fingerprints and other oily grime.
Super wetting agent: A specialty chemical that reduces the G2 Fluid's surface tension to reach the bottom of the groove. When you spray G2 Fluid on a record you can see it spread down the grooves.
Emulsifiers: Holds the oils, dirt, mildew and microdust particles in suspension. Then the microfiber fabric cleaning pad wipes and pulls the dirt-filled solution from the record surface.
Laboratory grade, double deionized, carbon filtered & UV treated water: Carrier for the active cleaning ingredients. Eliminates static electric charges on the record's surface on contact.

Replaceable Cleaning Pad Design

The GrooveWasher replaceable microfiber cleaning pad features a super absorbent black terry style split microfiber cover. (Other replacement pad styles are available for separate purchase.) This fabric is effective in removing the contaminants borne in the G2 Fluid from the record's microgroove.

The pad is secured to the walnut handle with low profile hook & loop velcro. This allows the pad to be removed from the walnut handle to be washed or replaced. These cleaning pads are hand made by Groovewasher's textile artists in Kansas City.

Notes: Get to the Bottom of the Groove!

The Black Magic Cleaning Pad digs deep for clean sound. An optional first step for grimy grooves.

This pre-cleaning soft brush has tracking fibers to deep clean your grooves. Finish by swapping to our microfiber cleaning pad to absorb the residue and polish your vinyl!

Order yours today and give it a try. Return for a full refund if you are not 100% satisfied.

Designed and handcrafted by the GrooveWasher Team in North Kansas City, MO, USA.

Notes: The Groovewasher Mondo Record & Stylus Care System

Groovewasher's top-of-the-line record and stylus care system. Elegant and effective.

Groovewasher's walnut products are solid chunks of 40 year old Black Walnut trees. Every one is unique. Some may have small surface cracks, splits or knots. This is the character of the wood, not a craftsman's mistake.

Notes: Keep your vinyl collection in pristine condition with this specially designed antistatic brush. Designed to clear the fine grooves of dust & fluff without damaging the delicate playing surfaces, an essential requirement for maintaining optimum reproduction quality.

Notes: The Acc Sees velvet antistatic vinyl brush cleans away dirt & grease while reducing static build up. This helps to improve sound reproduction quality and prolong the life expectancy of vinyl discs.

Notes: This brush is manufactured is made of ultra-fine pile very high quality velvet, specially selected for this purpose. The velvet reaches deep into the record grooves and removes even the finest dust particles. The brush itself can be easily cleaned using the two foam rubber scrapers located on both sides of the plastic brush base.

Notes: G-Sonic is a special ultrasonic wash formula that offers a more pure and focused blend of additives than can be commonly obtained off the shelf. The result is greater groove penetration for a superior ultrasonic cleaning.

Add ten drops of G-Sonic concentrate to each gallon of distilled water. Replace the cap and shake for at least five seconds to mix. Add the mixed solution to your ultrasonic tank and proceed to clean your vinyl records per your desired methodology. A one ounce bottle of G-Sonic will make up to 60 gallons of ultrasonic bath.

HumminGuru Users: One drop of G-Sonic added to the bath tank, after it is filled, will break the water's surface tension for improved cleaning. G-Sonic is a gentle surfactant and emulsifier blend.

Notes: The G2 Fluid 8 oz Refill Bottle

One 8 ounce bottle of G2 Fluid with spout top. Use to refill the 2 ounce and/or 4 ounce mist spray bottle. 1,000+ mist sprays in this 8 ounce bottle.

High tech G2 record cleaning fluid. Contains:

Surfactants: State of the art detergents dissolve and suspend fingerprints and other oily grime.

Super wetting agent: A specialty chemical that reduces the G2 Fluid's surface tension to reach the bottom of the groove. When you spray G2 Fluid on a record you can see it spread down the grooves.

Emulsifiers: Holds the oils, dirt, mildew and microdust particles in suspension. Then the microfiber fabric cleaning pad wipes and pulls the dirt-filled solution from the record surface.

Laboratory grade, double deionized, carbon filtered & UV treated water: Carrier for the active cleaning ingredients. Eliminates static electric charges on the record's surface on contact.

"This refill is one of the essential parts of the GroveWasher product that simply works great. Gently cleans the record surface lifting out all the accumulated dirt and grime with ease." Richard Villanova

Designed and handcrafted by the GrooveWasher Team in North Kansas City, MO, USA.

Notes: Special self-acting liquid that removes dust, dirt and dried liquids groove-deep and without residue.

Notes: Complete vinyl care in a handy pack. Includes original anti-static products:

- Carbon Fibre Brush
- Record Cleaning Fluid (20ml)
- Stylus Cleaner (Fluid & Brush)
- Record Cleaning Cloth

Notes: Specially formulated record cleaning fluid to deeply clean between vinyl grooves and help prolong the life of the vinyl surface. Dries to eliminate static without smears. Microfibre lint free cloth supplied in lid. 250ml.

Notes: This 28.5cm x 21cm anti-static record cleaning cloth is ideal for taking care of your record collection. Soft brushed micro-fibre, lint free, designed to clean vinyl, CD's and DVD's. Removes dust, grease and static effectively with or without fluid.

Notes: Eco-friendly record cleaning fluid

The next generation

The new Wash it 2 is our next generation cleaning fluid for the Pro-Ject Vinyl Cleaners. It is a ready-to-use mixture which contains demineralized water mixed with cleaning concentrate in optimum ratio. It does not contain alcohol, which may harm record surfaces. It contains only high-purity components, which are 100% eco-friendly, non-toxic and non-flammable.

Wash it 2 is the first solution to clean vinyls & shellac records gentle, but efficiently. It will evaporate without leaving residues on the record surface!

Available sizes:

250 ml
500 ml
1000 ml

Notes: Tonar micro fibre cloth is a material well known for it's properties to remove grease and fat from any surface. Tonar uses this material to clean finger prints and grease from records as well as CD's and DVD's.

It also will remove the dust from records and replace the former cotton type record cloths.

Notes: Highly absorbent split-fiber microfiber pad cover. Grey, soft suede style fabric. Works very well for fine grooming just before play. Also effective for spot cleaning a record with difficult to remove grime. (Choose the Black Terry style pad for general and heavy record cleaning. See the separate listing for that pad.)

Selected and tested by our R&D Team for effective wiping action. This pad has a 3/16" thick, laser cut acrylic base. The pad base has low profile velcro for firm attachment to the walnut handle. Easy removal for pad washing or replacement.

Notes: If you're just getting into vinyl, or finding your way back, the GrooveWasher INTRO Kit is a great way to enhance your overall experience. This Kit cleans your records using High Tech G2 Record Cleaning Fluid with our highly absorbent and washable microfiber fabric covered pad. The Label Protector Disc keeps the record label dry during cleaning.

If the price tag for other GrooveWasher Kit's is a hurdle, give this low cost INTRO Kit a try!

The INTRO Kit contains:

Microfiber fabric covered cleaning pad. Generous size: 5" x 3.5" x 1.5". Highly absorbent and grime removing fabric. Easy to use to clean records. Easy to wash when it gets dirty.

G2 High Tech Record Cleaning Fluid in 2 oz Mist Spray. More than 250 mist sprays to clean a lot of records!

Record label protector mask. Apply to the record label to keep it dry while mist spraying the G2 Fluid on the record.

Notes: Upgraded version of HumminGuru's excellent S-Duo stylus cleaner is now rechargeable with a built-in battery and features storage for the rubber supports, drying pads and water dropper. Same effective 110 kHz ultrasonic cleaning frequency.

Supplier's Notes:
2-in-1 Ultrasonic Record Stylus Cleaner and Digital Pressure Gauge

Rechargeable | Portable | Effortless

To enjoy the best audio sound, proper and regular record cleaning becomes very essential, but keeping the stylus clean is just as important. Even though ultrasonic cleaning has proven to be a very effective and economical way to remove contaminants with minimum risks of damage, applying ultrasonic technology in stylus cleaning is not a typical method, and such products are rarely found in the existing market. HumminGuru S-DUO Pro, an ultrasonic cleaner specifically designed for record stylus, defines a new way to enhance the cleaning performance and overall experience.

HumminGuru S-DUO Pro is a compact and portable device that combines ultrasonic cleaning and a digital pressure gauge in one place for the care of the record stylus. With a smartly-designed 2-in-1 feature, it does both steps of stylus cleaning and vertical downforce measuring in one go. The entire process is effortless and takes users less than a minute to complete. Its easy and quick operation, along with its convenient use, storage, and portability, make the stylus cleaning experience seamless and pleasurable.

Ultrasonic Cleaning: Highly Effective and Safe

It is acknowledged that the stylus tip is very delicate and tiny. Unlike those stylus cleaners that utilize motor vibration to clean the stylus with a short-hair brush pad, HumminGuru S-DUO Pro uses ultrasonic technology to better protect and extend the life of the stylus with no existence of abrasion. Cleaning the stylus in the ultrasonic bath with water completely avoids physical contact and thus it is risk-free to the surface of the stylus.

HumminGuru S-DUO Pro utilizes 110kHz ultrasonic cleaning frequency, which creates much smaller cavitation bubbles that effectively remove dust, grime, and hardened dirt off the stylus tip. The ultrasonic frequency selection is carefully matched with an optimal amount of electrical power to ensure safe and efficient cleaning. It is 100% safe to clean a stylus with a bonded diamond tip, as the cleaning process does not damage the adhesive in the water.

By default, the ultrasonic cleaning process takes only 20 seconds, and requires the use of 3-4 drops of distilled water (i0.3ml). After the cleaning is complete, the provided dust-proof drying pads can be used to absorb any remaining water on the stylus tip and housing, ensuring that the stylus is ready for use. For users who prefer to use any type of cleaning solution in addition to water, it is advisable to consult the manufacturer of the stylus cartridge for specific advice and guidelines.

The combination of a short cleaning time, minimal water usage, and the use of drying pads makes the HumminGuru S-DUO Pro a safe, efficient, and quick tool for maintaining the cleanliness and performance of the record stylus.

High Compatibility with Different Cartridges

HumminGuru S-DUO Pro is designed with high compatibility in mind, ensuring it can accommodate a wide range of cartridges. This is made possible through the inclusion of provided stylus rubber supports (3 types), which can be easily attached onto the water basin.

Aluminum Digital Pressure Gauge: Precise & Reliable

Setting the correct tracking force of the stylus is also an essential step for ensuring the playback result and the life of the valuable records and cartridge. The digital pressure gauge is cleverly incorporated into the HumminGuru S-DUO Pro device that makes the setup more convenient, faster, and easier for users. With the feature of a bi-directional LCD display, users can simply flip the device around and measure the vertical downforce right after the ultrasonic cleaning.

Furthermore, it offers convenient features to ensure accurate measurements. Firstly, the scale will automatically reset to zero when switching from the ultrasonic cleaning mode, or users can simply touch the gauge icon button once to reset it to zero before each use. This ensures that the gauge starts from a consistent baseline for precise measurements.

Secondly, a 5g mass weight is included with the product to maintain accuracy. Users can periodically check the scale by placing the weight on it to verify that it measures the expected weight accurately. This allows for regular calibration and helps ensure precise weighing results.

Lastly, the calibration function further enhances accuracy by allowing users to calibrate the gauge if needed. This feature ensures that the readings remain accurate over time and can be adjusted if any discrepancies are detected.

Rechargeable

HumminGuru S-DUO Pro is equipped with a rechargeable feature, eliminating the need for disposable batteries. This not only offers convenience and cost-effectiveness but also contributes to sustainability by reducing waste.

Notes: Secret Chord Analogue's Record Restore fluid is specially formulated to dissolve dust, dirt, grime, and binder substances commonly found in record grooves. The proprietary formula emulsifies and breaks down binders, including static electricity thereby releasing trapped impurities into a removable skin for a 100% clean. Specifically, Record Restore targets statically charged micro-particles, which if not neutralised will resist all efforts to remove them. The ongoing benefit is a long-lasting anti-static barrier, protecting your records from dust and other microscopic particles.

The formula works by first penetrating deep into the grooves where it turns contaminants, and the binder substances that weld them to the groove walls, into an emulsion.

The formula is engineered to specifically target and remove static charged soiling. Unless neutralised, this form of contaminant will remain adhered to the groove walls.

When the emulsion dries, the dissolved solids are trapped in the resulting film, which is simply peeled off the record. The binders and 100% of the dissolved contaminants are fully removed - without leaving any residue.

Unlike other cleaning methods, there's no cross-contamination from reused fluids, cloths or brushes. And there's no abrasive scrubbing or harmful ingredients that can damage your records.

Record Restore delivers a number of direct benefits. The removal of fine particles eliminates noise and protects the stylus against excessive wear, which in turn protects your records. In removing binders, Restore exposes the finest wave patterns on the groove walls. Little wonder people report hearing material they've not heard before.

Record Restore's advanced groove cleaning ability is highly rewarding for high end stylus shapes such as micro-line, micro-ridge, Shibata, etc. Sitting lower in the groove, these styluses are less tolerant of groove contaminants.

Another advantage Record Restore has over other cleaning methods is its long-lasting anti-static properties. Once a record has been cleaned, it remains static-free indefinitely.

Benefits

Record Restore delivers a number of direct benefits. The removal of fine particles eliminates noise and protects the stylus against excessive wear, which in turn protects your records. In removing binders, Restore exposes the finest wave patterns on the groove walls. Little wonder people report hearing material they've not heard before.

Record Restore's advanced groove cleaning ability is highly rewarding for high end stylus shapes such as micro-line, micro-ridge, Shibata, etc. Sitting lower in the groove, these styluses are less tolerant of groove contaminants.

Another advantage Record Restore has over other cleaning methods is its long-lasting anti-static properties. Once a record has been cleaned, it remains static-free indefinitely.

Notes: The water tank is compatible with Model HG01 HumminGuru ultrasonic vinyl record cleaner only.

*The water tank is not microwavable.

Notes: Part of HumminGuru's excellent value record care range, the Orbit is designed to remove static from your vinyl in any setting. Portable, easy to use and just as good for DJs as it is for home hi-fi use.

Supplier's Notes:
Re-define a Simpler Way to Eliminate Static

Vinyl records accumulate static charges due to friction, primarily from stylus drag during playback and when removing the record from the jacket and sleeve. This static buildup can lead to unwanted pops, crackles, and distortions in the audio. The HumminGuru Orbit Vinyl Record Static Remover provides a hands-free solution, essential for audiophiles seeking smooth record playback and an enhance listening experience. With its pioneering "rotating" design, the Orbit offers a highly effective way to neutralize static electricity by emitting + /- ions directly onto the record surface during rotations. By simply pressing the start button, and the Orbit will perform 10 rotations, delivering a clearer record free from electrostatic noise. Portable and convenient, the Orbit is a great tool to use before each playback, ensuring a remarkable audio journey with its exquisite sound quality.

Automatic Design

With a simple press of the start button, the Orbit will automatically rotate on the record platter for 10 cycles and stop once the static removal process is completed.

Positive and Negative Ion Discharge

Equipped with two sets of Plasma output and a high-speed fan, the Orbit discharges over 50 million pcs of each +/- ions per cubic centimetre. Situated 23mm above the record, the Orbit effectively eliminates static from the record surface.

Required Space

The Orbit requires an unrestricted space on a turntable platter with a minimum diameter of 326 mm (approx. 12.83 inch) for rotation.

Rechargeable

The Orbit can be recharged with the provided USB-C cable and each charge can use up to =100 uses. The battery indicator lights serve as a reminder of the power status.

Turntable Requirement:
Require a rotation space with a diameter of 326 mm (12.83 inches).
The spindle height with the applied record shall not exceed 11mm.

Also included: 2x spindle adapters (6mm thickness)

If the spindle height with the applied record exceeds 11mm, stack the spindle adapter(s) onto the spindle before placing the Orbit on top. The anti-static spindle adapter(s) allow the Orbit to be compatible with spindles ranging from 12mm in height.

Inside the package: HumminGuru Orbit, Cleaning Brush x 1, USB-C Charging Cable, Owner's Manual

Notes: The Brush IT from Pro-Ject is a must have accessory to ensure your vinyl is free from dust before playing. You just simply brush around the surface of an LP after placing it on your turntable to remove any settled dust, providing a clear path for your stylus. It features 2 sets of soft carbon fibre brushes on each side for effective dust removal.

Notes: Featuring a new cabinet, improved motor and a magnetic clamp to secure your record and speed up the cleaning process, the VC-S3 is Pro-Ject's flagship record cleaner, designed for larger collections. Great quality, great cleaning power.

Supplier's Notes:
The new VC-S3 is Pro-Ject's new premium record cleaning machine with completely new superior features. Vinyl records need a specific maintenance. The dry brush cleaning before playing the record is good to roughly remove dust. To effectively clean the grooves you need to wet clean the record. To achieve the perfect cleaning we also need a suitable cleaning fluid. Alcoholic cleaning fluids can destroy musical micro information of the grooves. That's the reason why Pro-Ject's designed our new eco-friendly non-alcoholic cleaning fluid called "Wash it 2". The new Wash it 2 is a pre-mixed liquid, so you don't have to dilute the concentrate yourself anymore. This avoids acidentally using unsuitable tap water for mixing. With Wash it 2 you can optimize the cleaning performance again. The VC-S3 is very powerful and cleans records completely in one to two revolutions.

Made in Europe!

The new magnetic clamp not only seals the record label from cleaning fluid to avoid damage on the label, it also speeds up the whole cleaning process. Place your record on the machine, put on the clamp and you are ready to go - no more tedious screwing of the clamp anymore. The robust easy to use metal arm is mechanically stable and focuses all suction power directly onto the record surface. Paired with new self-adhesive arm strip your records get cleaned perfectly. The large internal container (2,5 litres) collects used fluid and is effortlessly easy to empty. When using the Wash it 2 cleaning solution, the fluid will also evaporate in the container, meaning the container will almost never need to be emptied even after cleaning thousands of records. It shows fill-up capacity and guarantees no spillage of used cleaning fluid. The new VC-S3 is made in Europe with high quality materials and an excellent build-quality. With many practical features and excellent mechanical operation, the VC-S3 effectively combines industrial design appeal with an easy solution to great sound from your vinyl records.

Technical Specifications

Cleaning speed: 30 RPM
Included accessories: Brush
Vacuum Arm
Self-Adhesive Arm Strip
Magnetic clamp
Wash it 2 (100ml)
Power cable

Power connection: 110/120 or 230/240 Volt; 50 or 60 Hz

Dimensions: 415 x 325 x 272 mm (W x H x D)
Weight: 8,0kg

Please Note: Pro-Ject Record Cleaning Machines are not intended for commercial use. They are home-use products.

Notes: Drying stand for the Disco Antistat record cleaning machine

Notes: The Tonar Plastigoat is a high quality record brush with two rows of ultra-soft real natural goat hair. A perfect brush to use for wet cleaning of your vinyl records. The naturally anti-static bristles prevent static build-up and the steady handle provides perfect grip while cleaning your record collection.

Notes: If there's a tool that vinyl record lovers must have, it's an effective brush to clean the needle! The GrooveWasher SC1 Stylus Brush is the choice of thousands of audiophiles- who say it's the best darn stylus brush on the market!

This listing includes:

SC1 Stylus Cleaning Brush (4.6" long curved handle. Best stylus brush on the market.)
Stylus cleaning instructions
Ideal handle shape--4.6" long and curved to fit your hand. Easy to control while brushing the stylus and underside of the cartridge. Dense but soft nylon bristles, trimmed to a dome shape. Gentle on the stylus and cantilever. Can be used dry or with a couple of drops of GrooveWasher SC1 Stylus Fluid.

To clean your stylus safely, pull the brush straight back, from the back of the cartridge to the front.

*** Please note: cleaning fluid and turntable are not included, they are shown for demonstration purposes only. ***

Notes: The Audio Anatomy Vinyl-Cleaning Cloth made of high-quality microfibre is an indispensable cleaning accessory for your vinyl collection. Because of its very generous dimensions 40 x 40 cm it is very easy to use. It allows wet- and dry cleaning and very efficiently removes fingerprints and dust. In order to remove dirt that will accumulate in the high-quality microfibre cloth when cleaning your records, it can be machine washed up to 60 degrees.

In order to also keep your vinyl clean from dust after the application of the Audio Anatomy Vinyl-Cleaning Cloth, we recommend to store your vinyl in the antistatic Audio Anatomy Inner Sleeves.

Notes: Highly efficient and easy to use dry-cleaning of vinyl // Antistatic discharge // Soft ultrafine carbon fibres for gentle and effective cleaning // Stowable handle for removing dust

Notes: This tape head cleaner easily cleans and demagnetizes heads and rollers. It demagnetizes your system by using a spinning magnet, which removes remnant magnetic field or polarity that can distort playback. At the same time, the cleaning tape buffs the heads and rollers. This head cleaner can be used for home, portable and car cassette systems.

Before inserting the Vinyl Styl Audio Cassette Head Cleaner/Demagnetizer into your tape player:

- Apply 5-6 drops of cleaning fluid onto the tape through the slot in the front window
- Insert cassette into your deck
- Press play
- Allow the tape to run until the tape stops
- Remove from deck
- You're done. Sit back and enjoy the music

Package contains:

2 x 20ml bottle of tape head cleaning fluid
1 x Cleaning tape

Notes: Pack of 3 Extra-large lint free microfibre cloths are the perfect choice to clean your vinyl. Use to rest your LP on while cleaning to keep the underside of your LP protected. The super soft microfibre is lint free so is also perfect to clean the delicate surface of your LPs. Won't scratch or leave residual particles so you can be sure of a gentle but thorough clean.

Notes: Even in the cleanest environments, records can attract dust, various grease marks and debris. If left unchecked, these can fall into the record's grooves, compress, and eventually damage your LP. To protect your vinyl and also your stylus, it's important to clean your records regularly with a high-quality solution.

This professional grade cleaning fluid for deep track cleaning contains a blend of key cleaning and degreasing ingredients combined with an anti-static agent to ensure a thorough static free clean and de-grease.

Clean vinyl = improved audio quality.

Notes: The Replacement washer fluid is designed for the Spin Clean Record Washing System MK II. This cleaning fluid is a unique formula that lifts dirt and keeps your records safe and sparkling.

Note: The fluid used in the Record Washer System does not contain alcohol, so it is fine to be used with 78RPM records.

Notes: The new Mobile Fidelity records brush is the best brush currently available. Mobile Fidelity now offer a set of two replacement cleaning pads which are simple to put on the brush after you have cleaned about 100-150 records.

Notes: Clean Peace MK II

Compact cassette cleaner

Cleans recording had and playback head

Capstan and pinch rollers

Notes: This liquid is the exact same liquid as the Tonar QS Vinyl cleaner, but now supplied in a spray can that is convenient to use for small cleaning jobs together with the TonarWetgoat brush made of pure goats hair.

Notes: This record cleaning fluid made for use in all types of record cleaning machines currently on the market is only suitable for vinyl records (Important do not use with old 78 RPM shellac records as the liquid may do irreparable damage). Now what is so special about the QS-TONAR vinyl cleaner compared to similar looking competing products on the market?

QS-TONAR liquid has an extremely low surface tension
- Only because of this reason QS-TONAR liquid can penetrate right to the bottom of the grove where other fluids seem to penetrate, but actually just stay lying on top of the record surface.
- Only QS-TONAR liquid cleaner soaks the dust, dirt, air pollution as well as residue from previously used cleaners, fatty deposits remaining from the original record pressing process, even fungi and molds caused by records having been stored in humid conditions etc.
- QS-TONAR liquid detaches all of the mentioned dirt from the walls of the grove after which the brushes in the machine can easily wipe the groove completely clean. The amount of residue remaining in the grove is negligible - this contrary to almost all other liquids currently on the market.
- QS-TONAR liquid is much more volatile than other liquids reducing the drying time of the record to a minimum.
- QS-TONAR liquid has another property causing the dirt to remain floating in the liquid rather than settling back at the bottom of the grove.

Notes: This 15 ml (approx 1/2 oz) bottle of SC1 Fluid is formulated for use with the GrooveWasher SC1 Stylus Brush. It is also effective with other stylus brush styles.

Thw SC1 Stylus Fluid is a cousin of GrooveWasher's G2 Fluid. It has a relatively low concentration of organic alcohol compared to the other stylus fluids, which are often 100% isopropyl alcohol. Iso alcohol is an effective solvent but it evaporates too quickly and the contaminants can dry back on the stylus before it is removed with the brush.

The GrooveWasher SC1 Stylus Fluid Kit includes:

SC1 Stylus Fluid in a 15 ml dropper bottle with child proof cap.
Stylus cleaning instructions.
NOTE: Photos showing the SC1 Stylus Cleaning Brush are for illustration only. This listing is for the 15 ml SC1 Stylus Cleaning Fluid only.

Note: Cleaning fluids like G2 Fluid and SC1 Fluid can be irritating to skin and eyes. Avoid contact with your eyes. Flush with clean water. Keep all cleaning products out of the reach of children.

Notes: Custom CNC routed to store your GrooveWasher handle with replaceable cleaning pad, 2 oz G2 Fluid mist spray bottle, SC1 Stylus Brush and Stylus Cleaning Fluid.

Walnut Display Block comes with a 2 oz bottle of G2 Fluid!

See photo with all parts installed into the Block. This photo is an illustration of the use of the Block. This item listing is for the Walnut Display Block only.

Keep your GrooveWasher kit next to your turntable to groom your records and needle--just before each play.

Hand rubbed waterproof oil polyurethane finish.

Designed and made by GrooveWasher in North Kansas City, USA

Notes: 2 oz bottle of Groovewasher G2 record cleaning fluid.

Notes: Order this bottle to refill the G2 Fluid 2 ounce and 4 ounce mist spray bottles.

One 32 ounce bottle of G2 Fluid with spout top. Use to refill the 2 ounce or 4 oz mist spray bottles.

High Tech G2 Fluid Contains:

G2 Fluid Contains:

Surfactants: State of the art detergents dissolve and suspend fingerprints and other oily grime.

Super wetting agent: A specialty chemical that reduces the G2 Fluid's surface tension to reach the bottom of the groove. When you spray G2 Fluid on a record you can see it spread down the grooves.

Emulsifiers: Holds the oils, dirt, mildew and microdust particles in suspension. Then the microfiber fabric cleaning pad wipes and pulls the dirt-filled solution from the record surface.

Laboratory grade, double deionized, carbon filtered & UV treated water: Carrier for the active cleaning ingredients. Eliminates static electric charges on the record's surface on contact.

"This refill is one of the essential parts of the GroveWasher product that simply works great. Gently cleans the record surface lifting out all the accumulated dirt and grime with ease." Richard Villanova

Designed and handcrafted by GrooveWasher in North Kansas City, MO, USA.

Notes: The HumminGuru Stylus Cleaning Brush features a wide brush surface ( o9mm) for precise cleaning. Its long-handle design ensures a secure grip, facilitating easier cleaning of the stylus needle. An essential tool for maintaining the cleanliness of your record stylus regularly.

How To Use: Hold the stylus brush with the HumminGuru logo facing up. Hold it at a slight angle and gently brush from the back of the stylus towards the front. **Do not brush from side to side, from the front towards the back of the stylus, or press down on the stylus.

Inside the Package:

HumminGuru Stylus Brush

Specifications

Product Size: 13 x 100 x 6mm
Brush Cleaning Surface Area: o9mm

Notes: Non-alcoholic record cleaning fluid (50ml)

Notes: The Audio Anatomy Vinyl-Brush made of oak wood and goat hair ensures highly efficient and easy to use dry and wet-cleaning of vinyl. The very fine goat hair enters deeply into the grooves of the vinyl and therefore removes dust very efficiently. In combination with the nylon fibres the goat hair, at the same time while cleaning the record, discharges static electricity. Thus, the two main reasons for disturbed sound reproduction, dust and electrostatics, are removed by using the Audio Anatomy Oak Wood and Goat Hair Brush.

Apart from its cleaning capabilities the brush impresses with its beautiful design and the use of natural materials coming from the EU. In order to also keep your vinyl clean from dust after the application of the Audio Anatomy Oak Wood and Goat Hair Brush, we recommend to store your vinyl in the antistatic Audio Anatomy Inner Sleeves.

Notes: Replacement brush for the Pro-Ject VC-S. This brush is made from strands of goat hair, and helps to spread the Wash-IT solution evenly across the record without getting absorbed into the bristles.

*For use on the VC-S, VC-S MK2, VC-S2 and VC-E

Notes: The ultra-fine goat hair carefully remove dust and dirt from your records. The soft, antistatic bristles reduce the build-up of static electricity and give you a crisp, clean sound. Can be used with AM record cleaner for a deeper cleaning. The handle is made of Japanese Zelkova wood.

Clean sound since 1971

Drain the static charge from your records and lift any residual dust and grime. The conductivity of the brush's ultra-fine goat hairs eliminates static charges while gently and efficiently removing the dust, grit and particles that bung up your vinyl's grooves and degrade your record's sound. The hair reach deep into the grooves of your vinyl to remove even the smallest particles, leaving your records clean while prolonging the life of vinyl and stylus.

How it works

Gently hold the the brush in the grooves as the record spins. After the record makes a full rotation, angle the brush towards the outside of the record and carefully sweep the particles from the vinyl surface.