USD
Receive new release alerts for Tangible Waves
Filter
Equipment
Format
Featured
Price
Tags
Items 1 to 23 of 23 on page 1 of 1
People also bought...
AE Modular CVADDER-HQ Precision CV Adder Module (synth module)
Cat: 944306 Rel: 15 Feb 24
A precision adder module especially for adding 1V/octave (pitch-controlling) CVs.
Notes: The CVADDER-HQ is a precision adder especially for adding 1V/octave (pitch-controlling) CVs. This makes it possible e.g. to transpose a sequence. Compared to general purpose CV mixers (like POLAMIX), this module does the summing of the CVs very precise (within a few millivolts), so the desired pitch is not affected.
The module offers four CV inputs where three of them are summed, and the CV at the fourth input is subtracted - meaning "transposition downwards".
This module also allows transposing the incoming CV by one or two octaves or a variable offset by buttons.
A separate output provides the voltage of the internal transposition (+1, +2 octaves / free).
If the transposition buttons are not necessary and you prefer to have a dual precision adder, take a look at the 2CVADD-HQ module.
… Read moreThe module offers four CV inputs where three of them are summed, and the CV at the fourth input is subtracted - meaning "transposition downwards".
This module also allows transposing the incoming CV by one or two octaves or a variable offset by buttons.
A separate output provides the voltage of the internal transposition (+1, +2 octaves / free).
If the transposition buttons are not necessary and you prefer to have a dual precision adder, take a look at the 2CVADD-HQ module.
1 in stock $59.98
Click for better price!
or call +44 20 7424 1960
quote 944306
quote 944306
People also bought...
AE Modular JOYSTICK Eurorack Module (synth module)
Cat: 818237 Rel: 06 Jul 21
Eurorack interface module
Notes: This module offers a four-quadrant-control for CVs via its joystick.
The module can act either as CV source at its four outputs, or as four-quadrant attenuator for the CV inputs. Beyond this, a mix of the input CVs according to the joystick position is provided separately.
Another feature is a gate output that is controlled by pressing the joystick handle.
The joystick remains in each position - there is no automatic "return to centre".
The JOYSTICK module can operate in two different modes:
Quadrants independent: In this mode, all outputs are zero when the joystick is in centre position
Overlapped: In this mode, each quadrant output fades from full to zero over the whole range to the opposite corner.
Together with a quad VCA / mixer (available soon from tangible waves) you can use the JOYSTICK also for mixing/blending four independent audio sources.
… Read moreThe module can act either as CV source at its four outputs, or as four-quadrant attenuator for the CV inputs. Beyond this, a mix of the input CVs according to the joystick position is provided separately.
Another feature is a gate output that is controlled by pressing the joystick handle.
The joystick remains in each position - there is no automatic "return to centre".
The JOYSTICK module can operate in two different modes:
Quadrants independent: In this mode, all outputs are zero when the joystick is in centre position
Overlapped: In this mode, each quadrant output fades from full to zero over the whole range to the opposite corner.
Together with a quad VCA / mixer (available soon from tangible waves) you can use the JOYSTICK also for mixing/blending four independent audio sources.
1 in stock $71.85
People also bought...
Cat: 807715 Rel: 25 May 21
Interface eurorack module
Notes: Channel extender for MIXCONSOLE.
This module extends the MIXCONSOLE module with three additional channels; the channel level can be controlled via CV here, too. If no CV is attached, the level knob works as usual volume control.
… Read moreThis module extends the MIXCONSOLE module with three additional channels; the channel level can be controlled via CV here, too. If no CV is attached, the level knob works as usual volume control.
1 in stock $69.65
Click for better price!
or call +44 20 7424 1960
quote 807715
quote 807715
FORTHCOMING
Related products...
Tangible Waves AE Modular 2OSC R2 Dual 1V/Octave Oscillator Module (oscillator synth module)
Cat: 1084883
Dual 1V/octave oscillator module.
Notes: The 2OSC R2 is a dual 1V/octave oscillator module. Another successor of a classic AE module, the 2OSC/d. The 2OSC is a dual oscillator module, digitally based, with a great feature set:
Oscillator 1:
- Sawtooth
- Multi-Sawtooth, detuned
- Pulse Wave
- Triangle waveform with wavefolder
- Sinewave
- Suboscillator output
- Mix output (primary wave plus suboscillator)
Oscillator 2 , Noise:
This oscillator is focused on square waves; additionally to a pulse width controlled and CV-controllable square wave, it offers also a "synced square wave" (sounds really nasty!) and synced to oscillator 1. A separate suboscillator out is here available too. Additionally, a separate noise output is included, whose sound depends of the frequency setting of oscilaltor 2. The octave range switches are the same like in 2OSC/d. On top of the usual 1V/octave pitch control, the module can be controlled also via IMDI, the internal, patchable MIDI! Oscillators 1 and 2 are separate via different MIDI channels.
… Read moreOscillator 1:
- Sawtooth
- Multi-Sawtooth, detuned
- Pulse Wave
- Triangle waveform with wavefolder
- Sinewave
- Suboscillator output
- Mix output (primary wave plus suboscillator)
Oscillator 2 , Noise:
This oscillator is focused on square waves; additionally to a pulse width controlled and CV-controllable square wave, it offers also a "synced square wave" (sounds really nasty!) and synced to oscillator 1. A separate suboscillator out is here available too. Additionally, a separate noise output is included, whose sound depends of the frequency setting of oscilaltor 2. The octave range switches are the same like in 2OSC/d. On top of the usual 1V/octave pitch control, the module can be controlled also via IMDI, the internal, patchable MIDI! Oscillators 1 and 2 are separate via different MIDI channels.
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.coming soon $58.32
(No payment required now - pay when released)
People also bought...
Tangible Waves AE Modular DRUMKIT 010 R2 8-Bit Drum Sound Generator Module (sound generation module)
Cat: 1010419 Rel: 16 Aug 24
8-bit drum sound generator module
Notes: DRUMKIT 010 consists of 11 8-bit drum sound samples; 6 of them can be triggered in parallel in any combination by the trigger inputs. With a BANK selector knob, different combinations of the 11 samples can be selected. The PITCH knob affects the pitch of all instruments together, and with the REVERSE button the sounds are played backwards - quite a nice effect to be added here and there.
By design, this is a nasty, lo-fi drum sound source, but definitely with its own character. It works great together with the analogue KICK module.
… Read moreBy design, this is a nasty, lo-fi drum sound source, but definitely with its own character. It works great together with the analogue KICK module.
1 in stock $82.91
Click for better price!
or call +44 20 7424 1960
quote 1010419
quote 1010419
FORTHCOMING
Related products...
Tangible Waves AE Modular FADRMIX6 JACKOUT Expander Module For FADRMIX6 (expander synth module)
Cat: 1084924
An extension for the Tanglible Waves FADRMIX6.
Notes: The FADRMIX JACKOUT is an extension for the FADRMIX6 with two 1/4" (6.5mm) jack sockets for master left/right output and 4 stereo minijack sockets for the FX send and returns.
The module is connected via a small internal connection cable to the right of the FADRMIX6.
… Read moreThe module is connected via a small internal connection cable to the right of the FADRMIX6.
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.coming soon $40.36
(No payment required now - pay when released)
FORTHCOMING
Related products...
Tangible Waves AE Modular FADRMIX6 Performance Mixer Module (mixer synth module)
Cat: 1084887
Performance mixer for your AE system.
Notes: The FADRMIX6 module is a performance mixer for your AE system; if offers the following features:
6 mono input channels with two sockets per channel; these two inputs are mixed at equal level, so FADRMIX6 is in fact a 12-chnnel mixer (somehow)!
Click-free mute buttons per channels
Per channel: fader for level, knobs for pan and two FX-send channels
2 FX send-return sections (send mono, return stereo) to connect FX modules
FX sends can be individually configured as pre-fader / post-fader (switches on the back of the module)
FX returns can be switched mono/stereo
Master level faders; stereo minijack socket master out
Stereo headphone output as stereo minijack socket with separate level control.
An internal connector allows the extension of input channels and output / FX sends as jack sockets by the FADRMIX JACKOUT module
Module size: 6 units
… Read more6 mono input channels with two sockets per channel; these two inputs are mixed at equal level, so FADRMIX6 is in fact a 12-chnnel mixer (somehow)!
Click-free mute buttons per channels
Per channel: fader for level, knobs for pan and two FX-send channels
2 FX send-return sections (send mono, return stereo) to connect FX modules
FX sends can be individually configured as pre-fader / post-fader (switches on the back of the module)
FX returns can be switched mono/stereo
Master level faders; stereo minijack socket master out
Stereo headphone output as stereo minijack socket with separate level control.
An internal connector allows the extension of input channels and output / FX sends as jack sockets by the FADRMIX JACKOUT module
Module size: 6 units
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.coming soon $139.29
(No payment required now - pay when released)
People also bought...
Tangible Waves AE Modular Filterbank 914 12-Bandpass Filters Module (equalizer/filter synth module)
Cat: 967212 Rel: 14 Feb 24
Moog style filterbank Module.
Notes: The FILTERBANK914 is designed after the famous Moog 914 Fixed Filterbank. It includes 12 bandpass filters with fixed center frequencies and additionally a lowpass- and a highpass filter. Control knobs for all the frequency bands allow individual mixing of the bands. This is especially useful for shaping the sound spectrum similar to acoustic instruments - they get their character by certain frequency peaks, so called "formants".
This module is different to (and not a good choice as) a multiband equalizer. The equalizer can increase/decrease certain bands in the range of e.g. -12...+12dB, with the signal unchanged with all controls in center position. In contrast, the FILTERBANK914 controls are attenuators over the full level, meaning the individual band is completely muted when the knob is turned completely counter-clockwise.
As a special feature, the module has separate outputs for "even" and "odd" bands, meaning that one output only contains the sum of half the bandpasses, the other one the remaining ones. This leads to some type of "pseudo stereo".
… Read moreThis module is different to (and not a good choice as) a multiband equalizer. The equalizer can increase/decrease certain bands in the range of e.g. -12...+12dB, with the signal unchanged with all controls in center position. In contrast, the FILTERBANK914 controls are attenuators over the full level, meaning the individual band is completely muted when the knob is turned completely counter-clockwise.
As a special feature, the module has separate outputs for "even" and "odd" bands, meaning that one output only contains the sum of half the bandpasses, the other one the remaining ones. This leads to some type of "pseudo stereo".
1 in stock $101.72
Click for better price!
or call +44 20 7424 1960
quote 967212
quote 967212
People also bought...
Tangible Waves AE Modular FMOS FM Synthesis Module (oscillator synth module)
Cat: 786477 Rel: 16 Oct 20
Synthesis module
Notes: FM synthesis for the AE!
The FMOS is a new digital oscillator that brings FM synthesis to the AE modular! It offers the basic FM synthesis with one oscillator and one modulator, running both with sine waves or triangle waves. The modulation depth and frequency ratio of the modulator can be set with a knob and additionally by CV control. If you want pure sine waves, this is for you too - simply set the modulation level to 0.
The module is based on a simple 8-bit microcontroller and an adapted design of Jan Ostman.
… Read moreThe FMOS is a new digital oscillator that brings FM synthesis to the AE modular! It offers the basic FM synthesis with one oscillator and one modulator, running both with sine waves or triangle waves. The modulation depth and frequency ratio of the modulator can be set with a knob and additionally by CV control. If you want pure sine waves, this is for you too - simply set the modulation level to 0.
The module is based on a simple 8-bit microcontroller and an adapted design of Jan Ostman.
1 in stock $68.27
Click for better price!
or call +44 20 7424 1960
quote 786477
quote 786477
FORTHCOMING
Related products...
Tangible Waves AE Modular FMOS R2 2-Operator FM oscillator Module (oscillator synth module)
Cat: 1084925
FM oscillator module, a successor to Tangible Waves' FMOS module.
Notes: FMOS R2 is a FM oscillator, and the successor of the discontinued FMOS module with a lot of new features!
FMOS R2 is basically a 2-operator FM synthesis sound generator, with the classic parameters MULTIPLIER for the modulating operator and MOD DEPTH for controlling the amount of FMing of the carrier operator.
Beyond this basic functionality, FMOS R2 offers following extra features:
- Additionally to the basic sinewave operator waveform, FMOS R2 has five additional waveform combinations for the carrier/modulator waveform, resulting in a more rich overtone spectrum
- The FEEDBACK control adds feedback the carrier/modulator chain, adding more variety to the sound spectrum
- The modulator can optionally be set to fixed frequency, especially useful for synthesizing metallic, inharmonic sounds
- A sub-oscillator output provides a square wave one octave lower
- The MIX output provides a mix between the FM sound and the sub-oscillator.
- Pitch is either controlled by a 1V/octave CV or IMDI, the "modular MIDI" introduced by tangible waves
- Modulation depth can be modulated by CV
- All parameters can also be controlled via IMDI, with a number of MIDI controllers.
All this with a nice portion of 8-bit charm!
… Read moreFMOS R2 is basically a 2-operator FM synthesis sound generator, with the classic parameters MULTIPLIER for the modulating operator and MOD DEPTH for controlling the amount of FMing of the carrier operator.
Beyond this basic functionality, FMOS R2 offers following extra features:
- Additionally to the basic sinewave operator waveform, FMOS R2 has five additional waveform combinations for the carrier/modulator waveform, resulting in a more rich overtone spectrum
- The FEEDBACK control adds feedback the carrier/modulator chain, adding more variety to the sound spectrum
- The modulator can optionally be set to fixed frequency, especially useful for synthesizing metallic, inharmonic sounds
- A sub-oscillator output provides a square wave one octave lower
- The MIX output provides a mix between the FM sound and the sub-oscillator.
- Pitch is either controlled by a 1V/octave CV or IMDI, the "modular MIDI" introduced by tangible waves
- Modulation depth can be modulated by CV
- All parameters can also be controlled via IMDI, with a number of MIDI controllers.
All this with a nice portion of 8-bit charm!
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.coming soon $61.08
(No payment required now - pay when released)
People also bought...
Tangible Waves AE Modular Heartbeat Extender Heartbeat's Expander Module (clock generator/MIDI/utility/expander synth module)
Cat: 967225 Rel: 14 Feb 24
Heartbeat's expander module.
Notes: The HEARTBEAT EXTENDER expands the functionality of the HEARTBEAT module. It is connected to the HEARTBEAT module with a small ribbon cable (included) and offers following features:
Six preset buttons to store and recall different tempos with one button press
MIDI in and out sockets with LED indicators: The HEARTBEAT module can follow incoming MIDI timing data (MIDI start/stop/clock) as an additional option; and the current tempo of the HEARTBEAT is sent out as MIDI timing data if it acts as master clock in a complete system - other MIDI devices will follow it's tempo.
A knob that controls either the swing amount or the transition time when changing from one preset to another (known as accelerando/ritardando).
A lock switch, that disable the save button and other functions that could be an issue e.g. in live situations.
… Read moreSix preset buttons to store and recall different tempos with one button press
MIDI in and out sockets with LED indicators: The HEARTBEAT module can follow incoming MIDI timing data (MIDI start/stop/clock) as an additional option; and the current tempo of the HEARTBEAT is sent out as MIDI timing data if it acts as master clock in a complete system - other MIDI devices will follow it's tempo.
A knob that controls either the swing amount or the transition time when changing from one preset to another (known as accelerando/ritardando).
A lock switch, that disable the save button and other functions that could be an issue e.g. in live situations.
1 in stock $59.69
Click for better price!
or call +44 20 7424 1960
quote 967225
quote 967225
People also bought...
Cat: 1041387 Rel: 12 Nov 24
Interface module
Notes: The IMDI HEART module is the central module for using IMDI (the "internal MIDI" transmision) within AE modular.
It receives MIDI, either by a TRS adapter, or via USB-C (the module appears as Class-compliant MIDI device on a computer); the incoming data is splitted up to 16 outputs carrying IMDI data. Each output contains the information of one (or more) MIDI channel(s) and a freely assignable note range, in the standard MIDI data rate or at a much higher data rate. Realtime data, like MIDI start/stop/clock is provided as gate/trigger outputs; the 1/96th clock can be divided to other, slower clock rates.
The outputs can drive then modules that can receive IMDI, like the micro oscillators (uOSC, uFM, uPOLY) and other upcoming IMDI capable modules.
The 16 chains of IMDI controlled modules you get with IMDI HEART is enough for quite complex setups, so in most cases, one IMDI HEART will be enough.
… Read moreIt receives MIDI, either by a TRS adapter, or via USB-C (the module appears as Class-compliant MIDI device on a computer); the incoming data is splitted up to 16 outputs carrying IMDI data. Each output contains the information of one (or more) MIDI channel(s) and a freely assignable note range, in the standard MIDI data rate or at a much higher data rate. Realtime data, like MIDI start/stop/clock is provided as gate/trigger outputs; the 1/96th clock can be divided to other, slower clock rates.
The outputs can drive then modules that can receive IMDI, like the micro oscillators (uOSC, uFM, uPOLY) and other upcoming IMDI capable modules.
The 16 chains of IMDI controlled modules you get with IMDI HEART is enough for quite complex setups, so in most cases, one IMDI HEART will be enough.
1 in stock $76.84
Click for better price!
or call +44 20 7424 1960
quote 1041387
quote 1041387
FORTHCOMING
Related products...
Tangible Waves AE Modular MASTER R6 Power Supply Module (power synth module)
Cat: 1084926
The MASTER module is the base of an AE modular system if MIDI control has to be possible.
Notes: The MASTER module is the base of an AE modular system if MIDI control has to be possible; it contains
- The voltage regulation (5V) for the power supply of the modules
- A MIDI input (minijack; Breakout cable to DIN-5 socket is available separately); the MIDI channel can be selected between 1, 14, 15,16 or OMNI
- In/out-sockets (3.5mm minijack) for audio out and/or interfacing with a Eurorack system
- All bus signals (CV, GATE, CTRL, MIDI clock/start/stop) as patch sockets
- IMDI output
… Read more- The voltage regulation (5V) for the power supply of the modules
- A MIDI input (minijack; Breakout cable to DIN-5 socket is available separately); the MIDI channel can be selected between 1, 14, 15,16 or OMNI
- In/out-sockets (3.5mm minijack) for audio out and/or interfacing with a Eurorack system
- All bus signals (CV, GATE, CTRL, MIDI clock/start/stop) as patch sockets
- IMDI output
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.coming soon $79.59
(No payment required now - pay when released)
People also bought...
Tangible Waves AE Modular PAN/XFADE Routing Processor Module (utility module)
Cat: 1010428 Rel: 16 Aug 24
Routing processor module
Notes: The PAN/XFADE module is a combined routing processor for creating panning and crossfades. The PAN/XFADE works either as a signal panner, meaning one input signal is moved continuously between the left and right output, or, in crossfade mode, where it blends between two input signals into one output. Of course controllable by CV; and working for audio signals as well as DC control voltages.
… Read more 1 in stock $59.69
Click for better price!
or call +44 20 7424 1960
quote 1010428
quote 1010428
FORTHCOMING
Related products...
Tangible Waves AE Modular SEQ8 R2 8-Step Sequencer Module (sequencer synth module)
Cat: 1084929
An 8-step CV sequencer with CV out and IMDI in/out
Notes: The SEQ8 R2 s an 8-step sequencer for controlling oscillator pitch and triggering envelopes.
Compared to "classic" analog sequencers it works a bit different: Instead of setting the CV for each step independently (which means in fact "tuning" each step which can be a bit tedious), the SEQ8 has 4 knobs for presetting different CV's (= notes); each of the 8 step knobs selects one of these CVs, plus 0V (=base note) plus Pause (no trigger output). So some CVs have to be fine-tuned once; with the step knobs you can focus entirely on the sequence itself and you can even modify it on the fly, still remaining in tune.
The IMDI input allows timing and start/stop control via IMDI, e.g. from teh IMDI HEART module or from the MASTER R6 and newer. The module can be configured to different time signatures, scaling the notes (minor, major, pentatonic, chromatic) and adding an octave offset. The IMDI out provides the notes as IMDI, parallel to the CV/GATE output.
Additionally to the selected CV presets, the "raw" value of the step knobs is also accessible at an extra output.
… Read moreCompared to "classic" analog sequencers it works a bit different: Instead of setting the CV for each step independently (which means in fact "tuning" each step which can be a bit tedious), the SEQ8 has 4 knobs for presetting different CV's (= notes); each of the 8 step knobs selects one of these CVs, plus 0V (=base note) plus Pause (no trigger output). So some CVs have to be fine-tuned once; with the step knobs you can focus entirely on the sequence itself and you can even modify it on the fly, still remaining in tune.
The IMDI input allows timing and start/stop control via IMDI, e.g. from teh IMDI HEART module or from the MASTER R6 and newer. The module can be configured to different time signatures, scaling the notes (minor, major, pentatonic, chromatic) and adding an octave offset. The IMDI out provides the notes as IMDI, parallel to the CV/GATE output.
Additionally to the selected CV presets, the "raw" value of the step knobs is also accessible at an extra output.
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.coming soon $71.31
(No payment required now - pay when released)
People also bought...
Tangible Waves AE Modular TBD Multi-Functional DSP Module (digital/effect synth module)
Cat: 967253 Rel: 13 Feb 24
Multi-functional digital signal processing module.
Notes: The TBD module is a multifunctional DSP (digital signal processing) module that includes more than 30 different synthesis and audio processing plugins. It is a collaboration project between CTAG Kiel (an academic working group of Kiel University of Applied Sciences), instrumentsofthings.com (who produce this module for Eurorack) and tangiblewaves.
The module looks quite simplistic with it's only three knobs and three buttons, but the power lies in the web based user interface for editing and storing the parameters. For editing, the module is connected via USB to your computer and a small software tool running here is the bridge to the editing of the parameters via your web browser. IMPORTANT TO KNOW: When the editing is done, the module runs autonomously, without a computer!
Up to 10 favourites can be stored on the module and be chosen by the CONFIG button.
Dynamic control of the modules' parameters works via the two CV inputs and two trigger inputs (which are linked to two buttons), and two knobs are also available for live tweaking parameters. The assignment of inputs/knobs to actual parameters is done in the web based user interface.
Please note that the TBD module has mono audio input and output (compared to the Eurorack version which is stereo); plugins that do stereo audio work also in the AE TBD, but only on one channel. ("Why only mono?" you might ask; the limitation to mono is due to licensing agreements to keep the module price in the usual AE range.
The contained plugins are:
Talkbox (Vocoder), MSxxNoise (MS20 filter and Stone Phaser), Antique (Old Record / Tape Effect), Subotnik (Huge Modulations), VctrSyn, SpaceFX, Formantor, Bjorklund, Karpuskl, APCpp, Retroactor, Rompler (sample playback), WTOsc (custom wavetable), Claude (ported MI granular audio processor), BBeats, CStrip, CStripM, EveryTrim, MISVF, TBD03, PolyPad, TBDings (ported MI resonator), TBDaits (Ported MI Macro Oscillator), TBDeeps (ported MI Wavetable Oscillator), DustLoop, Dust, SubSynth, Sine Source, Simple VCA, SDelay, Plate Reverb, Pink Noise, MiVerb, MiVerb2, MiPShift, MiEnsemble, MiChorus, HiHat1, G-Verb, Freeverb, FBDlyLine, EChorus, Progen Reverb, CDelay
… Read moreThe module looks quite simplistic with it's only three knobs and three buttons, but the power lies in the web based user interface for editing and storing the parameters. For editing, the module is connected via USB to your computer and a small software tool running here is the bridge to the editing of the parameters via your web browser. IMPORTANT TO KNOW: When the editing is done, the module runs autonomously, without a computer!
Up to 10 favourites can be stored on the module and be chosen by the CONFIG button.
Dynamic control of the modules' parameters works via the two CV inputs and two trigger inputs (which are linked to two buttons), and two knobs are also available for live tweaking parameters. The assignment of inputs/knobs to actual parameters is done in the web based user interface.
Please note that the TBD module has mono audio input and output (compared to the Eurorack version which is stereo); plugins that do stereo audio work also in the AE TBD, but only on one channel. ("Why only mono?" you might ask; the limitation to mono is due to licensing agreements to keep the module price in the usual AE range.
The contained plugins are:
Talkbox (Vocoder), MSxxNoise (MS20 filter and Stone Phaser), Antique (Old Record / Tape Effect), Subotnik (Huge Modulations), VctrSyn, SpaceFX, Formantor, Bjorklund, Karpuskl, APCpp, Retroactor, Rompler (sample playback), WTOsc (custom wavetable), Claude (ported MI granular audio processor), BBeats, CStrip, CStripM, EveryTrim, MISVF, TBD03, PolyPad, TBDings (ported MI resonator), TBDaits (Ported MI Macro Oscillator), TBDeeps (ported MI Wavetable Oscillator), DustLoop, Dust, SubSynth, Sine Source, Simple VCA, SDelay, Plate Reverb, Pink Noise, MiVerb, MiVerb2, MiPShift, MiEnsemble, MiChorus, HiHat1, G-Verb, Freeverb, FBDlyLine, EChorus, Progen Reverb, CDelay
1 in stock $146.77
Click for better price!
or call +44 20 7424 1960
quote 967253
quote 967253
People also bought...
Tangible Waves AE Modular Trip Trigger Processor Module (clock generator/sequencer synth module)
Cat: 967255 Rel: 14 Feb 24
Trigger processor module.
Notes: It takes incoming triggers and repeats them - you can think of it as a delay module for triggers. The delay time and the number of repeats can be set with a knob and additionally be CV controlled. Beyond of static delay, the delays of one input trigger can be accelerated or decelerated, leading to the rhythm of a bouncing ball. In another mode, the probability of the output triggers can be chosen.
Different output modes change the assignment of the delays to the eight outputs; either, all delayed triggers for one input trigger are on one output, or the delays go through the outputs 1...8. By this, complex events can be triggered.
Finally, the acceleration and the gate time can be CV controlled as well.
The module is "polyphonic" in a sense, that consecutive triggers at the input don't stop currently running trigger outputs from a previous trigger, but mixing them all. Together with variable delay times and acceleration, highly complex trigger patterns can appear on each of the eight outputs.
… Read moreDifferent output modes change the assignment of the delays to the eight outputs; either, all delayed triggers for one input trigger are on one output, or the delays go through the outputs 1...8. By this, complex events can be triggered.
Finally, the acceleration and the gate time can be CV controlled as well.
The module is "polyphonic" in a sense, that consecutive triggers at the input don't stop currently running trigger outputs from a previous trigger, but mixing them all. Together with variable delay times and acceleration, highly complex trigger patterns can appear on each of the eight outputs.
1 in stock $59.98
Click for better price!
or call +44 20 7424 1960
quote 967255
quote 967255
People also bought...
Tangible Waves AE Modular u2ORx4 Dual Logic OR Module (1U modular synthesiser)
Cat: 1012331 Rel: 06 Aug 24
Dual logic OR module - 1U
Notes: Identical to the OR2x4 module in full size, but shrunk to 1/3 size. It contains two logical OR functions with four inputs each; with a switch they can be linked to an 8-input mode. Useful for "summing" gate / trigger signals from different sources.
Please note: These micro modules need a carrier, like the uBASE module. They cannot be mounted directly into an AE case.
… Read morePlease note: These micro modules need a carrier, like the uBASE module. They cannot be mounted directly into an AE case.
1 in stock $35.66
People also bought...
Tangible Waves AE Modular u4LOGIC Logic NAND/AND/XOR/Inverter Module (1U modular synthesiser)
Cat: 1012376 Rel: 06 Aug 24
Logic NAND, AND, XOR & inverter module - 1U
Notes: The u4LOGIC is identical to the full-size LOGIC module, but shrunk to 1/3 micro format.
Please note: These micro modules need a carrier, like the uBASE module. They cannot be mounted directly into an AE case.
… Read morePlease note: These micro modules need a carrier, like the uBASE module. They cannot be mounted directly into an AE case.
1 in stock $30.41
People also bought...
Tangible Waves AE Modular uFM Sound Generator Module (AE modular)
Cat: 1041397 Rel: 12 Nov 24
Sound generator module
Notes: The uFM is an oscillator module, that is focused on FM synthesis.
It's basically a two-operator FM synthesis, but with extended functionality: The operator waveforms can be either sine waves (classic FM), or four other different combinations of non-sinewave waveforms, that produce a much broader palette of sounds beyond the classic sinewave based FM synthesis.
The MOD DPT knob controls the modulation depth; in combination with a button press also the multiplier of the modulating operator can be defined.
Both parameters can be controlled also by CV and also via IMDI by MIDI controllers. The pitch can be controlled via 1V/octave CV or also via IMDI e.g. from a DAW
(For IMDI, see IMDI HEART for more info).
Additional to the normal audio output a suboctave output with a squarewave is provided, and a third output with the mix of the primary oscillator signal and the suboctave.
Quite a lot for such a tiny module, right?
Please note: These micro module needs a carrier, like the uBASE module. The cannot be mounted directly into an AE case.
… Read moreIt's basically a two-operator FM synthesis, but with extended functionality: The operator waveforms can be either sine waves (classic FM), or four other different combinations of non-sinewave waveforms, that produce a much broader palette of sounds beyond the classic sinewave based FM synthesis.
The MOD DPT knob controls the modulation depth; in combination with a button press also the multiplier of the modulating operator can be defined.
Both parameters can be controlled also by CV and also via IMDI by MIDI controllers. The pitch can be controlled via 1V/octave CV or also via IMDI e.g. from a DAW
(For IMDI, see IMDI HEART for more info).
Additional to the normal audio output a suboctave output with a squarewave is provided, and a third output with the mix of the primary oscillator signal and the suboctave.
Quite a lot for such a tiny module, right?
Please note: These micro module needs a carrier, like the uBASE module. The cannot be mounted directly into an AE case.
1 in stock $52.79
Click for better price!
or call +44 20 7424 1960
quote 1041397
quote 1041397
People also bought...
Tangible Waves AE Modular uS&H/RANDOM/NOISE Sample & Hold/Noise/ Random Pulses Generator Module (1U modular synthesiser)
Cat: 1012371 Rel: 07 Aug 24
Sample & hold, noise & random pulses generator module - 1U
Notes: The uS&H / RANDOM / NOISE module combines several functionalities for (pseudo) random control; it includes two sample & holds (one of them can be switched to track & hold) and a random/noise section. The latter can be switched between two types of random CV (stepped / smoothed), these either at an internal, tapped rate or an external clock.
Please note: These micro modules need a carrier, like the uBASE module. They cannot be mounted directly into an AE case.
… Read morePlease note: These micro modules need a carrier, like the uBASE module. They cannot be mounted directly into an AE case.
1 in stock $52.79
Click for better price!
or call +44 20 7424 1960
quote 1012371
quote 1012371
People also bought...
Tangible Waves AE Modular uTONE 2-Channel EQ Module (1U modular synthesiser)
Cat: 1012372 Rel: 06 Aug 24
2-channel EQ module - 1U
Notes: The uTONE is a bass-treble tone control, that is a quite useful tool to shape the overall spectrum of individual signal paths.
Please note: These micro modules need a carrier, like the uBASE module. They cannot be mounted directly into an AE case.
… Read morePlease note: These micro modules need a carrier, like the uBASE module. They cannot be mounted directly into an AE case.
1 in stock $33.72
FORTHCOMING
Related products...
Tangible Waves AE Modular VCO R2 Classic Analogue Oscillator Module (oscillator synth module)
Cat: 1084932
An updated version of Tangible Waves' VCO R module, a "classic" VCO.
Notes: This module is best if you want a classic, analog oscillator and prefer fully analog sound generation.? It offers:
- two CV inputs 1V/octave
- Modulation input with Level-knob, switchable to frequency or pulsewidth
- PWM input
- Coarse / Fine knob for frequency
- Pulsewidth knob for square wave
- Square / Triangle / Sawtooth output
The VCO R2 supersedes the VCO module which was part of the AE modular Kickstarter campaign in 2017; with the overall development of AE modular, the old one doesn't really meet the current quality level of AE any more. So we are happy to offer this completely redesigned module, that offers a really good volt/octave tracking over 5-6 octaves (using both CV inputs) and an amazing temperature stability.
… Read more- two CV inputs 1V/octave
- Modulation input with Level-knob, switchable to frequency or pulsewidth
- PWM input
- Coarse / Fine knob for frequency
- Pulsewidth knob for square wave
- Square / Triangle / Sawtooth output
The VCO R2 supersedes the VCO module which was part of the AE modular Kickstarter campaign in 2017; with the overall development of AE modular, the old one doesn't really meet the current quality level of AE any more. So we are happy to offer this completely redesigned module, that offers a really good volt/octave tracking over 5-6 octaves (using both CV inputs) and an amazing temperature stability.
Pre-orders at Juno
This product is available for pre-order at Juno, for shipping on the release date. You won’t be charged until the order is despatched.
We'll keep you informed of your order at every stage, and let you know if the release date changes.
If the price of the item drops before it's released, you will pay the lower price, but if it increases, you'll only pay the price you see today.
If you also include in-stock items on your order, they’ll be charged and shipped within 24 hours as usual.coming soon $61.08
(No payment required now - pay when released)
Items 1 to 23 of 23 on page 1 of 1
