100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Synths & Wood

View:
Options
Items 1 to 14 of 14 on page 1 of 1
Cat: 672209 Rel: 30 Nov 17
 
Oak veneered Roland Boutique custom made stand/end cheeks for the JX03, JP08, JU06, SE02, TR09, TB03, TR08 etc
Notes: This new version holds 3 Roland Boutique synths. This will also fit the TR09, TR08, SE02. SH01a and TB03 etc (you will need to remove them from the additional case that they come with).

The stand has been made from oak veneered MDF wood and is connected via 12x allen head Confirmat screws (key and screws provided) into an MDF wooden bar. These are a great addition to the Boutique synths and give a much nicer look and better working angle.

The Boutique synths are gripped in place by the sides of the stand, so do not fully tighten screws until units are placed inside. Make sure you do this on a flat surface to ensure the feet are correctly aligned.

The stand will need assembly as they will be sent flat packed - all screws, tools and rubber feet are provided.
Read more
 5 in stock $53.17
Cat: 674333 Rel: 15 Jan 18
 
Oak veneered dual synthesiser stand
Notes: Waldorf Blofeld and Pulse 2 oak veneered stand. This new version has been precision machined to ensure a quality fit and finish. Holding 2 Waldorf synths, the stand not only gives a much better working angle but also helps free up much needed space in your studio. The design leaves plenty of room for all cables to be easily attached or removed.

The synths fit snuggly into the recesses on the stand and is then secured using the supplied confirmat screws. Allen key and rubber feet also included.
Read more
 2 in stock $54.24
Cat: 672216 Rel: 30 Nov 17
 
Custom made Korg Volca stand/end cheeks
Notes: This version holds 2 Korg Volcas, which is ideal if you have the full range of Volcas as 2 stands can be put side by side to create a rack of four. The stand has been made from solid oak wood and is connected via 8x allen head Confirmat screws (key and screws provided) into an MDF wood bar. These are a great addition to the Volcas and give a much nicer look and working angle. You can also flip them round to have a much steeper angle if you prefer.

The stand will need assembly as it will be sent flat packed - all screws are provided.

Due to the nature of the material when assembling the stand the braces may split - this is perfectly normal and the stand will function as it should.
Read more
 2 in stock $47.74
Cat: 674332 Rel: 15 Jan 18
 
Pair of solid oak end cheeks for the Access Virus TI
Notes: Made from high quality oak, adding a touch of retro style to your synth. Each pair of cheeks is hand made and nicely angled to make the synth much more useable on your desktop. The end cheeks screw in using your original screws in the same place as the rack mounts or normal end cheeks.
Read more
 1 in stock $40.14
Cat: 672200 Rel: 30 Nov 17
 
Korg Microkorg oak end cheeks
Notes: These end cheeks are a direct replacement for the plastic end cheeks on the Korg Microkorg Synthesizer. They have been made from solid oak wood and are fixed using existing screws. The Wood has been oiled and should stay looking beautiful for a long time. These are a great addition to the Korg synth and add a touch of retro style.
Read more
 1 in stock $39.05
Cat: 674329 Rel: 15 Jan 18
 
Pair of custom made Roland Boutique end cheeks
Notes: These side panels are a direct replacement for the metal end cheeks on the K25M Keyboard, and a great addition to the Roland Boutique range of synths, giving a much more expensive look and feel. They have been made from solid oak wood and are fixed using existing screws. The wood has been oiled and should stay looking beautiful for a long time.
Read more
 1 in stock $40.14
Cat: 674331 Rel: 15 Jan 18
 
Pair of custom built/hand made solid oak side panels
Notes: Hand made solid oak end cheeks for the Roland System 1M. Made from solid European oak, adding a touch of retro style to your synth. Each stand is ideally angled to make the System 1M much more useable on your desktop. Fitted using the original screws from your synth.
Read more
 1 in stock $39.05
Cat: 672207 Rel: 30 Nov 17
 
Solid oak stand for 2 x Roland Boutiques
Notes: This new MK2 version holds 2 Boutique synths. The stand has been made from solid oak wood and is connected via 8x allen head Confirmat screws (key & screws provided) into an MDF wood bar. These are a great addition to the Roland range of synths and give a much nicer look and working angle and now there is more space for cables.

The stand will need assembly as they will be sent flat packed, all screws are provided. The Boutiques fits snuggly into the stand so do not fully tighten screws until the synths are placed inside, then tighten screws to hold in place firmly. Make sure you do this on a flat surface to ensure the feet are correctly aligned.

Due to the nature of the material if you overtighten braces may split - this is perfectly normal and the stand will function as it should.
Read more
 3 in stock $53.17
Cat: 674328 Rel: 15 Jan 18
 
Pair of custom made side panels for the Korg SQ1
Notes: Custom made solid European oak stand/end cheeks for the KORG SQ1 sequencer. These are a great addition to the SQ1 and offer a nice look and working angle. The sequencer fits snuggly into the stand and is held in place via the sides, connected via 4x confirmat allen head screws into an MDF wood bar (key & screws provided).
Read more
 1 in stock $39.05
Cat: 674334 Rel: 15 Jan 18
 
Pair of custom made Moog Werkstatt end cheeks
Notes: Custom made stand/end cheeks for the Moog Wekstatt 01 analogue synth. This stand allows you to have your Moog at a much more usable angle. The end cheeks have been made from solid oak wood and are connected via 4x confirmat allen head screws into an MDF bar (screws and key provided).

These are a great addition to the Moog and give a much more expensive look and feel - the oak has been oiled and should stay looking beautiful for a long time.
Read more
 2 in stock $39.05
Cat: 672211 Rel: 30 Nov 17
 
Roland Aira TR8 drum machine custom end panels
Notes: Custom built solid oak end cheeks for your drum machine.

This stand has been hand crafted from solid oak to give your drum machine a much nicer working angle.

The stand is assembled by connecting the side panels with 4x confirmat screws. Comes with fixings and an allen key to assemble your stand ready for use.

Item will need assembly as they are sent flat packed, all screws and tools are provided, this includes small rubber feet.
Read more
 4 in stock $47.74
Cat: 672206 Rel: 30 Nov 17
 
Solid oak Roland Boutique stand
Notes: These end cheeks have been made from solid oak wood and are connected via 4x confirmat allen head screws (key provided) into an MDF bar. The Oak has been oiled and should stay looking beautiful for a long time. These are a great addition to the Roland Boutique range of synths and give a much more expensive look and feel.

The stand will need assembly as they will be sent flat packed, all screws are provided. The Boutique fits snuggly into the stand so do not fully tighten screws until synth is placed inside, then tighten screws to hold in place firmly.

Due to the nature of the material when assembling the stand the braces may split - this is perfectly normal and the stand will function as it should.
Read more
 2 in stock $48.82
Cat: 672212 Rel: 30 Nov 17
 
Solid oak custom made stand
Notes: Hand crafted from solid oak to give your Console 1 a much nicer working angle.

The stand is assembled by connecting the side panels with 4x Confirmat screws. All screws and tools are provided, including small rubber feet.
Read more
 2 in stock $49.91
Cat: 672214 Rel: 30 Nov 17
 
Solid oak Waldorf Pulse 2 & Blofeld stand
Notes: This stand has been made from solid oak wood and is connected via 4x allen head Confirmat screws (key & screws provided) into an MDF wood bar. These are a great addition to the Waldorfs and give a much nicer look and working angle.

The Waldorf Synths fit snuggly into the stand so do not fully tighten screws else you may split the MDF bar. Make sure to assemble on a flat surface to ensure the feet are correctly alligned.

Flat packed - all screws and tools are provided.
Read more
 3 in stock $39.06
Items 1 to 14 of 14 on page 1 of 1

Filter

Synths & Wood
Release Date
Featured
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now
Close