Search dance music

Notes: ***B-STOCK: Box opened, product in perfect working order***


Enter the Behringer CP35 ATTENUATORS Module. An authentic reproduction of the circuitry from the Modular 55, 35 and 15 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The CP35 features 4 passive attenuators with linked inputs and 4 separate outputs. Each attenuator knob can be used to adjust the level of the input signal passively from - 8 to unity gain. Connecting a single signal to the first input will allow it to pass to all 4 outputs to have up to 4 variations of a single signal source. Introducing a signal into the subsequent outputs will break the chain from the previous input. For example, if you have a signal in input 2, then this will feed into input 3 and 4 leaving input 1 to feed out of output 1. Having multiple inputs allows you to attenuate 4 separate signals and be more flexible with your tone.

Along with the standard outputs, the CP35 also features 6-volt outputs. These outputs give a reference voltage of -6 Volts out of one pair and +6 Volts out the other. Also included are two banks of 4-point multiple circuits for you to be able to route multiple copies of input signals to other modules. The CP35 can be a powerful addition to your synthesizer rig by allowing you to have multiple sources output to multiple modules so you can shape and sculpt sounds that are sure to blow everyone away!

Installing the CP35 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the CP35 to be mixed with other synth modules for a truly unique set up.

Notes: The PSU11 power supply is required for proper operation in your part of the world, and one of a wide range of power supplies offered by Behringer specifically for your device.

Notes: The Behringer XENYX 302USB is ideally suited for a small home studio or the on-the-go recording enthusiast.

At approximately 4" long and 5" wide (117mm x 135mm), the Behringer XENYX 302USB respects your desk space, while providing an XLR & 1/4" combination socket, stereo USB/line channel plus a dedicated 2-track input.

Don't let the XENYX 302USB's diminutive size fool you, this little gem is loaded with features typically reserved for larger, more expensive mixers. For instance, Behringer equipped the mic input with their XENYX mic preamp, which is legendary for its sonic clarity and high-headroom performance. Behringer also gave the mic and line/USB channels our 2-band British-style EQs (low and high) and provide a 2-track input that can be assigned to either the main mix or phones.

You can even power the XENYX 302USB from your computer's USB port, which is great for capturing the sounds of migratory birds in flight, or for posting your podcast straight to the web. sports announcers, radio and TV reporters will definitely want one of these in their field bag.

Notes: The Behringer U-Control UMX610 is a controller keyboard with a control section for a wide range of applications. The UMX gives you independent control of hardware synthesisers, sound module and effects devices. You can just use the UMX to operate sequencing software or computer plug-ins from a convenient remote location.The UMX Series controllers provide total flexibility and tremendous ease of use, allowing you to realise your ideas intuitively with 61 full size, velocity-sensitive keys, 10 programmable MIDI controllers plus 8 user-set buttons.

Plug and play your software instruments or MP3 tracks and run them straight into your sound system with the included USB/audio interface. Or simply record your stereo tracks on your Windows or Mac PC. Compose and record with XT Softwares's energyXT Compact Behringer Edition. This amazing DAW (Digital Audio Workstation) makes it easy to manipulate your audio and MIDI files, turning song ideas into stunning CD or web-ready recordings.

The UMX610 ships with Tracktion audio production software to get you creating music straight out of the box!

Notes: The A500 reference amplifier is the ideal choice for recording studios, post-production suites, or anyone seeking audiophile-grade performance without the audiophile-grade sticker shock.

Professional audio engineers around the world are impressed by the A500's performance and surprised by its affordability. Capable of delivering 2 x 300W into 4 Ohms or 600W into 8 Ohms bridged, the A500 has enough headroom to always keep you on the safe side. Advanced convection-type cooling technology ensures stable, noise-free operation, while its servo-controlled design can drive virtually any passive speaker.

A precise level meter and clip indicators are provided for accurate performance monitoring. Input connections are provided in the form of balanced XLR and 1/4" TRS connectors, as well as unbalanced RCA sockets, ensuring you have loads of input options. Plus, the speaker outputs give you the choice between professional touch-proof binding posts and 1/4" TS connectors.

To ensure years of trouble-free operation, Behringer use only Toshiba or Fairchild high-power transistors that are known for their rock-solid reliability. In addition, an independent thermal overload protection system, with LED indicators for each channel, automatically protects both your amplifier and your speakers. Last but not least, Behringer use tough, high-current toroidal transformers for absolute reliability and the lowest possible noise interference.

Audiophile-grade performance, ultra-reliable and undeniable affordability, the Behringer A500.

www.youtube.com/watch?v=RWj5CUl7rio

Notes: Make sure every cable in your arsenal is in good working order with the invaluable Behringer cable tester CT100. This incredibly portable audio solution is a must-have for sound engineers and musicians alike.

The CT100 accepts every type of cable you might use in a recording or live performance situation: XLR, mono and TRS jack (1/4", 1/8", TT), RCA and even MIDI. Choose from three modes: cable test mode, installed cable tester mode and tone mode. The CT100 can check for continuity, intermittency, phantom power presence and grounded shields. Because this handy tool runs on 2 x AA batteries, you can carry it in your pocket and be ready to troubleshoot at a moment's notice.

The cable tester CT100 is the smart, portable and unbelievably affordable way to ensure your next show or recording session runs smoothly.

Notes: Few things are more essential to recording or live performance than dynamic microphones. The Behringer XM8500 microphone has the crucial features and durability to come through for your sound again and again.

Dynamic mics have several advantages that make them ideal for live vocal applications and for recording amplified instruments. They're robust, resistant to moisture and can achieve high gain before feedback. The XM8500's cardioid pickup pattern captures the source signal, such as a guitar amplifier or vocalist, while shunning off-axis sound.

The XM8500 provides an amazing frequency response of 50Hz to 15 kHz and includes a 2-stage pop filter to minimize breath and pop noises. And with its tough metal construction and sturdy steel windscreen, you can count on it to come through after countless gigs and studio applications. We've even included a rugged hard case with a mic clip and stand adapter.

Notes: The cardioid-diaphragm B-1 microphone is a home recording enthusiast's dream come true. This professional-quality condenser microphone is designed to capture your sounds with incredible realism, sensitivity and accuracy.

Condenser microphones are the ideal choice for capturing vocals and acoustic instruments. They're the primary type of microphone used in recording studios and radio stations. They are capable of capturing much more detail than dynamic microphones because of their wider, flatter frequency response. Another difference between condenser and dynamic mics is they contain active circuitry that requires phantom power (+48V DC) for operation. You can power them from any phantom power equipped Behringer XENYX mixer, plus enjoy the benefits of our state-of-the-art XENYX mic preamps.

The B-1 is an affordable, high-quality way to put this essential studio tool to work for you. Thanks to its 1.0" capsule, it captures sound with incredible realism and sensitivity. It boasts a wide frequency response from 20Hz to 20 kHz, enhanced by a pronounced presence boost. With its excellent transducer and gold-plated XLR output, the B-1 truly delivers on the promise of noise-free transmission. The B-1 also gives you a switchable -10dB attenuator to capture high-volume signal sources without distorting, as well as a low-cut filter to eliminate infrasonics caused by floor rumble and other turbulence.

The B-1 is built to be your go-to condenser mic for years to come. Its tough, nickel-plated brass body can withstand all the rigors of bleary-eyed late-night recording marathons. And with its foam-padded, aluminum carrying case, it travels in safety and style. We also included a heavy-duty suspension mount and windscreen.

This condenser mic is an excellent choice for live and studio applications, and it's available at a price that will leave you with enough cash left over to secure other recording essentials.

Notes: Condenser microphones are the ideal choice for capturing vocals and acoustic instruments. They're the primary type of microphone used in recording studios and radio stations. They are capable of capturing much more detail than dynamic microphones because of their wider, flatter frequency response. Another difference between condenser and dynamic mics is that they contain active circuitry that requires phantom power (+48V DC) for operation. You can power them from any phantom power equipped Behringer XENYX mixer, plus enjoy the benefits of our state-of-the-art XENYX mic preamps.

The B-2 is an affordable, high-quality way to put this essential studio tool to work for you. Thanks to its pressure gradient transducer and shock-mounted 1.0" gold-sputtered dual-diaphragm capsule, the B-2 delivers an open, transparent sound with excellent transient response. It boasts a frequency response from 20Hz to 20 kHz with just a slight boost in the presence range. It has 2 selectable pickup patterns: omni for capturing sound in all directions; and cardioid for picking up your source signal while rejecting off-axis sound. With its excellent transducer and gold-plated XLR output, the B-2 is very neutral sounding and truly delivers on the promise of noise-free transmission.

The B-2 also gives you a switchable -10dB attenuator to capture high-volume signal sources without distorting, as well as a low-cut filter to eliminate infrasonics caused by floor rumble and other turbulence.

The B-2 is built to be your go-to condenser mic for years to come. Its tough, nickel-plate brass body can withstand all the rigors of those late-night recording marathons. And with its aluminum foam-padded carrying case, it travels in safety and style. We also included a heavy-duty suspension mount and windscreen.

This condenser mic is an excellent choice for live and studio applications, and it's available at a price that will leave you with enough cash left over to secure other recording essentials.

Notes: The HPS3000 provides everything you need for comfortable listening. The oval-shaped ear cups contain high-resolution cobalt capsules that deliver every nuance of your sound. Because of the demands of your active lifestyle, we've engineered the one-sided cable from the finest oxygen-free copper wire that resists tangling and provides maximum durability. It also comes with a 1/4" TRS adapter for the 1/8" TRS connector, making it compatible with everything from your MP3 player to your mixing console.

Notes: Behringer present the U-Control UCA222 USB audio interface with energyXT2.5 Compact Behringer Edition included.

If you're ready to take your projects to an even higher level, the XT Software energyXT2.5 is just the trick. This amazing DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, turning song ideas into stunning CD or web-ready recordings. The energyXT2.5 includes built-in synthesizers, which can be accessed directly via an external controller or programmed by step-write mode. There's even a built-in drum machine and internal multi-FX processor.

Notes: Bargainous DJ mixer from Behringer, packing in features expected from much more expensive products: four channel design with digital summing, three-band EQ and built-in effects.

Supplier notes:
The Behringer DDM4000 is a state-of-the-art 32bit digital pro DJ mixer, jam-packed with creative tools, yet its intuitive layout will let you feel at home in an instant. Editing, storing and recalling your settings is simply a breeze. Hook up your turntables and CD/MP3 players to its 4 stereo channels, each with fully programmable EQ and Kill switches. Put ultimate versatility at your fingertips with fully programmable beat-sync-able multi-FX modules, a pair of high-precision BPM counters and a digital crossfader with custom curve adjustment. The super-cool BPM-sync'd sampler with real-time pitch control, loop and reverse functions will make your crowd go wild.

Get this digital monster DDM4000 and become the star of the night.

Notes: The DJX-750 Pro DJ mixer merges intuitive operation with built-in digital effects processing for clean, transparent sound that will set your dance floor on fire.

The revved-up FX processor puts advanced parameter control right at your fingertips: no longer are you confined to rigid presets that limit your creativity. With the DJX-750, you can change FX parameters on-the-fly, pushing your performance to the next level. In no time you'll be creating powerful sets with your own custom-tailored effects sounds, all of which can be controlled in real-time. Some parameters at your disposal include bit crusher depth, manual filter sweeps, panning (LFO Rate), delay/echo time and much more. You can even set delay and echo timing relative to the internal BPM counter for extremely musical results.

Notes: The Pro Mixer DX626 is a professional high-quality 3-channel DJ mixer with integrated Beat-Per-Minute (BPM) counter, and embodies a proven 3-channel design loved by DJs worldwide beginners and professionals alike. Its super-smooth dual-rail Ultraglide crossfader with up to 500,000 life cycles guarantees years of trouble-free fun.

Numerous features such as three dual input stereo channels with gain and 3-band kill EQ (-32 dB) and one channel additionally switchable to studio-grade ULN microphone input and the manual talkover function enable you to work in completely new and imaginative ways. The DX626 is extremely easy to operate and it helps you give free rein to your creativity. Additional features include PFL function with a master/PFL mix option and a peak hold level meter with a dedicated PFL bar graph. There is also a BNC gooseneck lamp socket.

Notes: The Behringer HPM1000 multi-purpose headphones provide semi-pro users with an incredible performance unheard of in this price category. They feature an ultra-wide frequency response, high dynamic range, a high-resolution capsule and oval-shaped ear cups with a comfortable headband.

The high-quality components and exceptionally rugged construction ensure long life. The Behringer HPM1000 headphones is
conceived and designed by Behringer Germany.

Notes: Make sure your mixer has a 5-pin cable connector. If it only has 4 pins, please use CFM-2 replacement crossfader instead. All electro-mechanical parts eventually wear down, especially the crossfaders on mixers as they undergo the wear and tear of heavy use. This crossfader module gives mixers a second life. This replacement part protects the performance quality and the value of your favorite musical tool. You can even use the crossfader module to upgrade a second-hand mixer. With the Crossfader Module, your mixer will function reliably for many years to come.


You must remove the cover of your Behringer unit to add/exchange the crossfader. Electrical current from power cables can be hazardous. DO NOT REMOVE THE COVER OF YOUR BEHRINGER UNIT UNLESS YOU ARE QUALIFIED TO DO SO. To avoid personal injury or equipment damage, disconnect the attached power cords before you open the unit cover. Do not operate the Behringer unit without the cover in place. Failure to take these precautions may result in personal injury and system damage.


Do not make mechanical or electrical modifications to the equipment. Behringer are not responsible for regulatory compliance of a modified Behringer product. If you are not confident of your own ability to perform this action, then please contact one of our authorised service centres or the dealership from where the unit was purchased.ion, then please contact one of our authorised service centres or the dealership from where the unit was purchased.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Expand your X32 mixer's recording capability with the 32-channel X-USB audio interface expansion card. Multitrack record live or studio performances straight to your computer via optimized USB 2.0. The 24-bit bi-directional signal flow and advanced driver support ensure your results sound their best going in and coming out of your computer. Run "virtual sound checks" by playing back audio tracks from your computer through an X32 mixer equipped with the X-USB expansion card.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Upgrade your DDM4000 DJ mixer with the X1 Infinium Optical Fader. Its patented and contact-free optical technology means the X1 will be functional for countless gigs, all while delivering a truly analog feel and touch. This fader includes complete installation instructions and toolkit.

Notes: ***B-STOCK: Box damaged, product in perfect working order***


The DJX-750 Pro DJ mixer merges intuitive operation with built-in digital effects processing for clean, transparent sound that will set your dance floor on fire.

The revved-up FX processor puts advanced parameter control right at your fingertips: no longer are you confined to rigid presets that limit your creativity. With the DJX-750, you can change FX parameters on-the-fly, pushing your performance to the next level. In no time you'll be creating powerful sets with your own custom-tailored effects sounds, all of which can be controlled in real-time. Some parameters at your disposal include bit crusher depth, manual filter sweeps, panning (LFO Rate), delay/echo time and much more. You can even set delay and echo timing relative to the internal BPM counter for extremely musical results.

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


The TRUTH B2031A monitors have been so wildly successful, thousands upon thousands of them have been sold to some of the most critical ears on the planet. Due to their high-resolution performance, B2031A active 2-way reference studio monitors are perfect for near-field monitoring applications - from small mixing environments to multi-channel surround setups.

When it comes to your studio recordings, you want honesty. In fact, considering how important your art is, you should demand it! That's why Behringer designed the B2031A Active 2-Way Reference Monitor to speak nothing but the TRUTH. The B2031A boasts big power, 265 Watts of bi-amplified output to an ultra-responsive, long-throw 8.75" polypropylene woofer, which provides tight and accurate bass - and a high-resolution, ferrofluid-cooled tweeter for crystal-clear highs. And although it was designed for the studio, where every note you play or sing is always "under the microscope", the B2031A makes an absolutely fantastic addition to your stereo or video surround system!

Notes: ***B-STOCK: Original box damaged and product is in different packaging, but product is in perfect working order***


The VMX100 offers two dual input stereo channels for connection of up to four stereo sources, selectable on the top panel. A basic ULN mic input with level control is also provided.

Each stereo channel sports a great-sounding 2 band kill EQ with 32 dB of attenuation and a 45mm Ultraglide fader.

The PFL section features a channel 1/ channel 2 balance control, while the main section is equipped with a dual 10-segment LED level meter, which displays your choice of main or PFL signals, as well as stereo main mix and tape outputs.

Notes: ***B-STOCK: Box opened and missing software, product in perfect condition ***


The incredible U-PHORIA UMC404HD bridges the gap between your creativity and your fans. This blazingly fast USB 2.0 studio in a box will have you recording your next masterpiece in minutes with all the connectivity required for your microphones, guitars, keyboards and even MIDI devices.

Record the perfect vocal right to your computer-based DAW thanks to the 4 astonishingly pure, world-class MIDAS-designed mic preamps, which include +48 Volt phantom power for condenser microphones, all going through studio-grade 24-Bit/192 kHz converters for the best possible sound quality. Whether you're a singer-songwriter, producer on the go, or just need a rock-solid interface for running backing tracks at a gig, the ultra-dependable U-PHORIA UMC404HD will help you shine in the digital domain.

When it's time to make recording history on your Mac or Windows computer, plug in microphones, instruments or line level sources to the UMC404HD's 4 combination XLR/TRS inputs for the ultimate in studio flexibility! Connect and communicate with MIDI devices to add the benefit of control surfaces to your studio workflow.

You take your tracks seriously, and the UMC404HD respects that, providing up to 192 kHz resolution for even the most demanding applications in music as well as video post production. Work with confidence and accuracy in your favourite recording software for professional results every time.

Ever since its formation in the 1970s, MIDAS has had a long history of innovation and leadership in the world of audio mixing consoles. Employed by the most famous touring acts and installations world-wide, legendary MIDAS consoles such as the XL4 and Heritage H3000 quickly became industry standards.

MIDAS has earned their impeccable reputation due to their no-compromise approach for audio and build quality and in particular for their Award-winning Mic Preamps which are considered by industry experts as the industry's best sounding designs. Building on this legacy, the XL8 and PRO Series of Live Mixing Systems continue this great heritage of Award-winning audio quality.

BEHRINGER is proud to incorporate a MIDAS designed mic preamp for the ultimate in high quality audio reproduction in both live and studio environments. Find out more about MIDAS' amazing legacy by visiting their extensive website.

The UMC404HD mix control allows zero-latency direct monitoring, which means musicians can experience their performance clearly - with no delay or lag in the returning signal, resulting in a better performance and recording. A powerful phones output has its own level control and Monitor A/B source select for DJ-style cueing. To make it a done-deal, Behringer provide free audio recording, editing and podcasting software, plus 150 instrument / effects plug-ins - just a download away at behringer.com.

On the rear panel of the UMC404HD, you'll find the USB 2.0 port for simple and easy connection to your computer, along with plenty of analog playback options including 1/4" TRS, RCA and XLR. The UMC404HD also features 4 analog Inserts for use with external effects such as compressors, gates and EQs, etc. Built-in MIDI I/O allows you to connect keyboards and all your favourite outboard MIDI hardware.

Tracktion is one of the world's fastest and easiest Digital Audio Workstations (DAW) for composing, recording, editing, mixing and sharing your music with the world. Featuring a single-screen interface, and pushing the envelope in design elegance, Tracktion brings together outstanding Pro DAW features, such as dynamic automation, unlimited track count, MIDI recording and support for VST and AU plug-ins. This powerful music production software gives you all the tools of an entire professional-grade recording studio. Learning a DAW has never been easier, thanks to their vast and readily available library of resources.

As a way of saying "Thank You", when you register your product at behringer.com, Behringer reward you with a complimentary download code for the full version of Tracktion 4. Recording and editing couldn't be easier. To learn more about Tracktion, visit tracktion.com/support/videos.

The U-PHORIA UMC404HD is a powerful 4 input, 4 output USB recording interface featuring genuine MIDAS-designed mic preamps with exceptional 24-Bit/192 kHz high-resolution converters, designed to help your recordings and mixes sound their absolute best. Visit your local dealer or online reseller and find out what a great addition to any studio or mobile recording rig it can be.

Notes: ***B-STOCK: Original box damaged, product is in different packaging but in perfect working order***

The ULTRADRIVE PRO DCX2496 is the answer to making your venue sound like it was tuned by the pros. Over the past years the DCX2496 has become an industry standard and several hundred thousand units have been employed in high-end touring as well as install applications. The DCX2496 is the perfect way to manage a multi-speaker sound system in any sized venue - from cinema to sanctuary to concert hall. Featuring 2 inputs, 6 outputs and 24-bit/96 kHz high-end AD/DA converters, this state-of-the-art processor will take your system to the next level and beyond.

Superb Connectivity and Impeccable Sound Quality:

Start with the DCX2496's analog inputs (one suitable as a digital stereo AES/EBU input) and 6 analog outputs - you get maximum flexibility in just one rack space. Superb high-end Cirrus Logic* 24-bit/96 kHz A/D - D/A converters give you ultimate signal integrity - and an extremely-broad dynamic range of 120 dB!

Huge Processing Power:

Speaker protection and processing are the cornerstones for any speaker management system. The DCX2496 features precise dynamic EQs for level-dependent equalization, plus extremely musical parametric EQs that can be applied to all I/O for high-precision signal sculpting. 6 outputs with individual crossover filters, including your choice of Butterworth, Bessel and Linkwitz-Riley designs, each with selectable roll-off characteristics from 6 to 48 dB/octave - perfect for optimizing any 2, 3, or 4-way system. Finally, our "Zero"-attack limiters provide the ultimate in loudspeaker protection on all output channels.

Limitless Control:

In addition to the plethora of EQ filter and crossover options, the DCX2496 offers adjustable delays for all I/O, allowing you to either manually, or automatically correct for room temperature, phase and arrival time differences in order to perfectly configure your delay-line speakers. A PCMCIA slot is provided for storing up to 60 user-defined presets internally, or optionally via your PC for instant recall when moving between multiple venues. The DCX2496 gives you the rock-solid solution for great sound - show after show!

Incredible Sound and Protection Every Time:

The ULTRADRIVE PRO's sleek design, with its high-power 32-bit Analog Device Sharc DSP, ultra-high resolution AKMr 24-bit/96kHz AD & DA converters and maximum processing power provide outstanding audio performance, helping you get the most out of your sound system - no matter where the gig takes you!

Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


The 150-Watt NEKKST K5 Studio Monitor's unparalleled, world-class performance is the result of a major collaboration between BEHRINGER audio engineers and loudspeaker master-designer/founder of KRK - Keith R. Klawitter.

Advanced Waveguide technology creates ultimate acoustic dispersion and extremely large "sweet zone" True bi-amping mode with 2 separate amplifiers for ultimate sound reproduction.

Ultra-high resolution, 1" silk dome tweeter for ultimate sound reproduction. Long-throw 5" woofer with deformation-resistant glass fibre cone.

Notes: The 24-Input, 4-Bus EURODESK SX2442FX allows you to effortlessly achieve premium-quality sound, thanks to 16 of our studio-grade XENYX Mic Preamps, 2 full stereo channels with 4-band EQ, plus 2 additional sets of stereo inputs channels with Level and Aux controls.

All mono channels feature our ultra-musical, 3-band "British" channel EQs, complete with a semi-parametric mid band for the ultimate in sound sculpting. Add to this not one, but two of our 24-bit dual-engine stereo FX processors with 99 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects - and the SX2442FX becomes an incredibly versatile mixer for your recording projects and live performances.

Sonically Superior Mic Preamps:
The SX2442FX features our legendary, high headroom XENYX mic preamps, which have been praised by audio engineers all over the world. These state-of-the-art mic pres represent a major step in the evolution of audio technology - and they can easily hold their own, even when compared to the most expensive stand-alone mic preamps. XENYX preamps offer a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to well above 200 kHz. Armed with these outstanding mic preamps, the SX2442FX provides such transparent, crystal-clear performance you just might think someone upgraded your mics while you weren't looking.

Sublimely Musical British EQ:
The British consoles of the 1960s and '70s changed the sound of rock and roll - without them the British Invasion might not have happened. Those legendary mixing desks soon became the envy of engineers and producers all over the world. The channel EQ on our XENYX mixers is based on that very same circuitry, allowing you to imbue signals with incredible warmth and detailed musical character. Even when applied generously, these equalizers exhibit sweet forgiveness and superb audio quality.

Effective FX:
The SX2442FX features not one, but two of our 24-bit dual-engine stereo FX processors - with 99 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects. Complete with a highly accurate input meter, these studio-grade effects provide stunningly-professional results, and can be routed to a wide range of destinations, ensuring the ultimate in versatility.

FBQ - Totally Feedback-Free:
For more than 20 years, BEHRINGER has designed and manufactured some of the most successful FBQ Feedback Elimination processors. Now you can own and enjoy the benefits of this technology, as we have integrated the revolutionary FBQ Feedback Detection System in this product, so your sound system is completely feedback-free, allowing you to focus on your performance. Utilizing an ultra-fast feedback detection system, this ingenious circuitry helps you recognize and tame feedback frequencies immediately. When feedback is sensed in a specific frequency range, the LED on the associated EQ fader illuminates, showing you at a glance which fader to lower to overcome the feedback. That simple!

Special Features:
The 24-Input SX2442FX comes equipped with 16 of our legendary, Phantom powered XENYX Mic Preamps, 4 stereo Input channels, 2 Aux Sends and 2 stereo FX Returns, plus Inserts on all mono channels. Other features include: 4 Subgroups for mixing versatility; Main Inserts (the ideal path for connecting graphic equalizers or compressor/limiters); Mono Out with sweepable Low-Pass Filter for direct connection to active subwoofers - and a dedicated Talkback channel, with a built-in mic for communicating with the talent.

Value:
No matter what your audio mixing needs, the SX2442FX provides the performance and features that can take your talent to the next level, at a price that is sure to amaze you. Professional sound quality, 24 Inputs with 16 of our legendary XENYX Mic Preamps, 3-band British channel EQs, dual 24-Bit Multi-FX Processors, and massive connectivity make the EURODESK SX2442FX 4-Bus mixer ideal for both your live gigs and recording projects.

Notes: Legendary Analog VCO/VCF/VCA Module for Eurorack

The 80s was the golden age of electronic music. Synthesizers were at their prime and almost every hit song and movie soundtrack at that time had a synth in one form or another. Modular synths have become more and more popular with professionals and enthusiasts over the years and they're about to get even better.

This is the Behringer System 100 110 VCO/VCF/VCA Module. An authentic reproduction of the original "System 100M" circuitry from the 80s that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the 110 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun!

The 110 comes with a complete synth voice with an internally patched signal flow for ease of use and to save patching time so you can focus on your music. You can vary the VCO section by selecting one of three waveforms; triangle, ramp and Pulse Width Modulation which can be adjusted by the Mod Manual knob. The VCO also offers pitch and range control knobs as well as one audio output, which can be routed to another source, and two CV inputs.

The VCF features cutoff frequency and resonance sliders while the VCA comes with two audio outputs (low/high). Both the VCF and VCA each feature two audio inputs and two CV inputs that allow for other sources to be plugged into the 110, making it a must-have in any modular synth.

Installing the 110 VCO/VCF/VCA is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 110 VCO/VCF/VCA to be mixed with other synth modules for a truly unique set up.

Whether you're just getting into modular synths or looking to complete your collection, the 110 VCO/VCF/VCA module from Behringer is a great tool to have when creating amazing music.

Specification:

Inputs
Pulse width mod
Type
3.5 mm TS jack, DC coupled

Impedance
>70 kO, unbalanced

Maximum input level
0 V to +10 V, 4% per volt

Signal input
Type
Impedance
>50 kO, unbalanced

Max input level
+17 dBu @ unity gain

VCO mod input
Type
2 x 3.5 mm TS jacks, summed

Impedance
>50 kO, unbalanced

CV range
0 V to +10 V, 1 V/oct

VCF mod input
Type
2 x 3.5 mm TS jacks, summed

Impedance
>50 kO, unbalanced

CV range
0 V to +10 V, 1 V/oct

VCA mod input
Type
2 x 3.5 mm TS jacks, summed

Impedance
>50 kO, unbalanced

CV range
0 V to +10 V, typically 1 V per 10 dB

Outputs
VCO output
Type
3.5 mm TS jack, DC coupled

Impedance
1 kO, unbalanced

Max output level
10 V p-p

Frequency range with no external CV
<10 Hz to 500 Hz

Frequency range using external CV
<1 Hz to 30 kHz

VCA output
Type
2 x 3.5 mm TS jacks, AC coupled

High impedance
1 kO, unbalanced

Low impedance
3 kO, unbalanced

High max output leve
+18 dBu

Low max output level
-2 dBu

High output noise
<-60 dBu, 22 Hz -22 kHz

Low output noise
<-80 dBu, 22 Hz -22 kHz

Controls
Pulse width manua
50% to min

Waveform
Triangle, sawtooth, pulse

Range
32', 16', 8', 4', 2'

Pitch
2 octave range

Cutoff frequency
20 Hz to 20 kHz

Resonance
Off to self oscillation

Sig in level
-8 to unity gain

Mod in level
-8 to unity gain

VCA initial gain
Power
Power supply
Eurorack

Current draw
80 mA (+12 V), 50 mA (-12 V)

Physical
Dimensions
81 x 129 x 46 mm (3.2 x 5.1 x 1.8")

Rack units
16 HP

Weight
0.19 kg (0.42 lbs)

Notes: Semi-modular analog synthesizer with 3 VCOs and multi-mode VCF in 8U rackmount format.

An ultra-affordable and even more feature-packed homage to that iconic synthesizer comes in the form of the Behringer 2600. Conjure up the virtually any sound imaginable with incredible finesse and ease. The pure analog signal path is based on the authentic ARP 2600 circuitry from the 70s with matched transistors and JFETs. Owning a 2600 is like having your piece of history enabling you to re-create timeless classics or forge your own musical path.

Great care has been taken in engineering the 2600, including the true-to-the-original analog circuitry, semi-modular architecture and triple VCO designs that come together to recreate classic tones that are evocative of classic electronic music. This highly focused attention to detail is what gives the 2600 its ultra-flexible sound shaping capability. It gives you the ability to cover a lot of amazing tones from super-fat bass, tasty leads - all the way to full on dreamy ambience from the far reaches of your imagination.

Specification

Input
VCO 1 / 2 / 3
Frequency modulation (FM) control
11 x 3.5 mm TS jacks, CV range: -10 V to +10 V

Pulse width modulation (PWM)
2 x 3.5 mm TS jack, CV range: -5 V to +5 V, 1 V/10%

VCF
Audio
5 x 3.5 mm TS jacks, 50 kO unbalanced

Control
3 x 3.5 mm TS jacks, CV range: -10 V to +10 V

ADSR / AR envelope generator
S&H clock
1 x 3.5 mm TS jack, threshold: > 6 V

Gate in
1 x 3.5 mm TS jack, threshold: +4 V

Trig in
1 x 3.5 mm TS jack, threshold: +5 V

VCA
Audio
2 x 3.5 mm TS jacks, 50 kO unbalanced

Control (linear
1 x 3.5 mm TS jack, CV range: -10 V to +10 V

Control (exponential)
1 x 3.5 mm TS jack, CV range: -10 V to +10 V

Mixer / Reverb
Audio
2 x 3.5 mm TS jacks, 50 kO unbalanced

Left / right inputs
2 x 3.5 mm TS jacks, 50 kO unbalanced

LFO
Ext vib in
1 x 3.5 mm TS jack, 50 kO unbalanced

Notes: Legendary Analog Parametric EQ, Mixer and Output Module for Eurorack.

This is the Behringer System 100 305 EQ/MIXER/OUTPUT Module. A parametric EQ, mixer/oscillator and headphone amp combo that's an authentic reproduction of the original "System 100M" circuitry from the 80s that can fit in a standard Eurorack case. The best part? It's at a very affordable price! Mix the 305 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun!

The 305 allows for maximum tone shaping with its 4-channel EQ section complete with level, bandwidth and frequency controls that span a wide frequency spectrum from 20 Hz all the way up to 20 kHz. Using the two outputs of this section, you can then patch signals to two different modules for some extra modulation and waveform sculpting possibilities and even switch between EQ'd and Bypass modes for a quick comparison.

For added mixing capabilities, you can use the 305's 4-input mixer with individual pan and level controls. The output signal can be in either mono or stereo via 3.5mm and 14" jacks. Monitor your overall signal though the independent headphone output and its included level control.

Installing the 305 EQ/MIXER/OUTPUT is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 305 EQ/MIXER/OUTPUT to be mixed with other synth modules for a truly unique set up.

Notes: Professional 4-Channel active DI-Box, booster, and line isolator.

THE ULTRA-DI PRO DI4800A gives you 4 first-class DI channels in a single rack space. Each channel is equipped with one input (XLR or 14" TRS) and two XLR Outputs at the front and back to connect to your amp or monitor console allowing for 8 outputs in all. Plus, the DI4800A is designed to accommodate virtually any input signal, with a switchable output attenuation of -20 dB, while our highly acclaimed OT-1 output transformers ensure pristine and powerful output.

Direct Injection (DI) boxes make it possible to connect guitars, basses and keyboards (as well as other line-level devices) to audio mixers and recorders. The DI4800A takes the DI box to the next level by providing +6 dB and +12 dB gain switches for a total of +18 dB of gain boost perfect for amplifying low-level signals. The DI4800A also features a -20 dB attenuation switch per channel, gold-plated XLR output connectors which provide reliable, low-noise operation and per channel ground-lift switches to eliminate ground-loop hum issues.

Notes: Legendary 2500 series dual noise source module for Eurorack.

This is the Behringer 2500 series DUAL NOISE/RANDOM VOLTAGE MODULE 1016. An authentic reproduction of the original "System 2500" circuitry from the 70's that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the DUAL NOISE/RANDOM VOLTAGE MODULE 1016 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The DUAL NOISE/RANDOM VOLTAGE MODULE 1016 is a classic discrete transistor white/pink/random noise source with independent attenuators for the white/pink noise level, a white /pink selector switch with color coded LED's. The slow random voltage generator produces random CV voltages and the maximum level can be controlled via the attenuators as well as an on/off switch with LED indicators for each channel. The 2 channels are completely independent of each other for even more creative possibilities.

The 1016 gives you comprehensive connectivity, each channel has a separate white/pink noise output and separate outputs for the random voltages, the outputs are all available simultaneously to feed multiple noise and CV signals to other modules.

Installing the DUAL NOISE/RANDOM VOLTAGE MODULE 1016 is easy as it is designed to fit into a standard Eurorack case. Just connect the power cable to the power supply and screw in the module using the included screws. This allows for the 1016 to be mixed with other synth modules for a truly unique set up.

Specification:

Outputs
Noise
Type
2 x 3.5 mm TS jacks, DC coupled

Impedance
1 kO, unbalanced

Max output level
i5 V

Random
Type
2 x 3.5 mm TS jacks, DC coupled

Impedance
1 kO, unbalanced

Max output level
i5 V

Controls
Noise
Attenuates noise generator output

Random
Attenuates voltage output

White/pink/of
Selects white or pink noise, or of

Random on/of
Engages or disengages voltage generator

Power
Power supply
Eurorack

Current draw
45 mA (+12 V), 15 mA (-12 V)

Physical
Dimensions
42 x 71 x 129 mm (1.7 x 2.8 x 5.1")

Rack units
14 HP

Weight
0.13 kg (0.29 lbs)

Notes: Legendary 2500 Series 12dB state variable filter module for Eurorack.

This is the Behringer 2500 series MULTIMODE FILTER/RESONATOR MODULE 1047. An authentic reproduction of the original "System 2500" circuitry from the 70's that can fit in a standard Eurorack case. The best part? It's at a very affordable price. Mix the MULTIMODE FILTER/RESONATOR MODULE 1047 in with your existing rig or start your modular synth journey from here. Either way you're sure to have a lot of fun.

The MULTIMODE FILTER/RESONATOR MODULE 1047 is a classic voltage controlled 12 dB per octave state variable filter, the filter is a matched transistor design for a vintage sound. The 1047 filter is equipped with a coarse and fine filter frequency controls, a resonance (Q) control which acts on all 4 filter outputs, a resonance limit switch prevents signal overload when high levels of resonance are used, the notch frequency/fc control allows the notch frequency to be adjusted up or down from fc as set by the frequency controls, 2 summed frequency CV attenuators and a resonance (Q) CV attenuator for maximum flexibility, the signal input is also equipped with an attenuator. All this gives you endless possibilities of filter curve shape to create the ultimate sound.

The 1047 gives you comprehensive connectivity, filter signal input, FCV 1 and FCV 2 inputs can be used for filter frequency control or modulation, the Q CV input allows modulation of Q and resonance. The independent low-pass, high-pass, band-pass and notch filter outputs are all available simultaneously to feed multiple filter signals to other modules.

Installing the MULTIMODE FILTER/RESONATOR MODULE 1047 is easy as it is designed to fit into a standard Eurorack case. Just connect the power cable to the power supply and screw in the module using the included screws. This allows for the 1047 to be mixed with other synth modules for a truly unique set up.

Notes: The large-diaphragm TM1 Condenser Microphone is designed to capture your sounds with incredible realism, sensitivity and accuracy. Featuring premium-grade electronic components and a pure gold-plated diaphragm capsule, the TM1 captures pristinely clear audio via its cardioid pickup pattern design and wide 132 dB dynamic range. This versatile microphone is well suited for a variety of applications ranging from recording studios to broadcast stations. Rounding out the package is a heavy duty shock mount with integrated pop shield, a dedicated dust cover, and a 20' (6 m) professional grade microphone cable.

Condenser microphones are the ideal choice for capturing vocals and acoustic instruments and are the primary type of microphone used in recording studios and radio stations. The TM1 mic is capable of capturing much more detail than most dynamic microphones because of its wider and flatter frequency response. Another difference between condenser and dynamic mics is they contain active circuitry that requires phantom power (+48 V) for operation. You can power your TM1 using any phantom power equipped mixing console.

The TM1 condenser microphone is the affordable, premium-quality way to get what you really hear into your recorder or computer DAW. Thanks to the pressure gradient transducer and internally shock-mounted 1.0" gold-sputtered large diaphragm capsule, the TM1 mic delivers an open transparent sound with excellent transient response, and large frequency response from 20 Hz - 20 kHz. Its cardioid pickup pattern is superb for capturing the most subtle vocal or instrumental nuance, while rejecting undesirable off -axis sounds.

Clean and ultra-quiet operation is the hallmark of any great microphone, and the TM1 comes through with virtually noise-free transmission via its exceptional transducer and gold-plated XLR output. Add an onboard state-of-the-industry preamplifier with transformer-less output stage, and your sound source is delivered with unparalleled accuracy and transparency.

The TM1 is designed to be your go-to studio microphone for years and years to come. An excellent choice for both live and studio applications, you get the professional-grade TM1, heavy duty shock mount with pop filter, and a 20' (6 m) microphone cable. Just add the talent and your mic stand - and you are ready to track.

Notes: The PK108 is a super compact, exceptional 2-way, 350-Watt PA sound-reinforcement loudspeaker with Ultra-Wide sound dispersion and portability that is ideal for live sound, portable PA, monitor wedge and House of Worship applications. This amazingly versatile passive loudspeaker is ultra-and easy to carry and feature pole integrated in the housing and built-in screw thread for easy setup and hanging. Sound reinforcement has never been so easy!

The LF and HF transducers are designed specifically for each application - it's what sets us apart from the competition. When you buy a Behringer loudspeaker, you can rest assured that the transducers inside have been engineered to perform flawlessly in conjunction with every other element for truly professional results. The PK108 cranks out Incredibly deep bass and acoustic power with articulate, detailed mids and exceptional highs.

Big here, small there, lots of this, just a touch of that - we all have our own personal preferences, but the PK108 puts it all in a convenient, easy to carry package - and really packs a massive punch with power handling up to 350 Watts. Lightweight of PK108 make it easy to lift and transport - and the great-sound is supremely affordable.

The PK108 PA loudspeaker stands head and shoulders above the rest of the pack and delivers exceptional performance, even when pushed to the limit. Lightweight and powerful, with custom designed transducers, massive power handling and extreme portability, the PK108 loudspeaker is ideal for any music application - at a price that is unheard of in this class.

Specifications:

System Data
Peak power
320 W

Impedance: 8 O

Type: 2-way

Frequency response:
87 Hz to 35 kHz (i3 dB)
20 Hz to 20 kHz (-10 dB)

Sound pressure level (SPL): 96 dB (full space, 1 W @ 1 m)

Nominal dispersion
70- H x 50- W

Crossover frequency: 2.2 kHz

Rigging fittings: Ergonomically shaped handle 35 mm pole socket

Components:
Tweeter
1" compression driver

Woofer: 8" (203 mm)

Connectors: 2 x Speaker Twist Connectors 4 pins

Wiring: Pins 1+ / 1- input Pins 2+ / 2- link

Dimensions / Weight:
Dimensions (H x W x D)
395 x 254 x 211 mm (15.6 x 10 x 8.3")

Weight: 5.1 kg (11.2 lbs)

Notes: The PK108A is a super compact, exceptional 2-way, 250-Watt powered PA sound-reinforcement loudspeaker with built-in media player and Bluetooth* that is ideal for live sound, portable PA, Karaoke, monitor wedge and House of Worship applications.

This amazingly self-contained PA solution that merges 250-Watt Class-AB power amp technology with an integrated 2-channel mixer and standalone microphone channel, built-in Bluetooth, a high-performance MP3 player with USB stick/SD/MMC card slots and exceptional portability. A convenient Power Line output allows you to connect multiple PK108 passive speakers while fast-link Bluetooth* connectivity allows true stereo reproduction with another PK108A and PK110A. Sound reinforcement has never been so easy!

Your music lives on your phone, computer or tablet, so Behringer have made it easy to access and play through the PK108A. With a simple swipe of your finger, you can instantly stream all your favorite music from any Bluetooth-equipped device, such as your computer, smart phone or tablet. Streaming music via Bluetooth Technology opens a tremendous amount of available content, such as a virtually limitless array of online radio-channels, multimedia providers and much more. Just pressing the linking button on PK108A will fast-link with another PK108A or PK110A with true wireless stereo. Imagine that you have the whole PA at your fingertips; control the party from the dance floor, or the background music comfortably from your chair. Simple, easy and amazing.

The amazing PK108A features a built-in 2-channel mixers with the same ultra-low noise, high-headroom mic preamps that have made our mixers legendary. Also included is 2-band equalizer, plus Bluetooth for streaming audio directly from your device, and the individual Mic and Line inputs accept virtually any level signal you're likely to run across. Variable Input gain controls (with Clip LED) will have you dialing in the perfect level every time. The simple and intuitive user interface consists of a dedicated Level control per channel, a Master volume and separate controls for Treble and Bass.

One of the coolest features of the PK108A system is its embedded mp3 player. Just plug in your favorite playlist (via USB stick, SD, MMC card) and use the 6-button pad with its Mode, Play/Pause, Random, Rewind, Forward and fast-linking Bluetooth*. From break and background music to high resolution karaoke performance tracks, this mp3 player can handle it all. All PK series MP3 players comes with remote control included with up to 33 ft (10 m) of wireless freedom.

Our LF and HF transducers are designed specifically for each application - it's what sets us apart from the competition. When you buy a Behringer loudspeaker, you can rest assured that the transducers inside have been engineered to perform flawlessly in conjunction with every other element for truly professional results. The PK108 cranks out Incredibly deep bass and acoustic power with articulate, detailed mids and exceptional highs.

The PK108A features a powerful 8" long-excursion low-frequency driver for powerful bass, a 1'' compression driver mounted on an ultra-wide dispersion, large-format exponential horn for exceptional high-frequency reproduction. These speaker components were designed specifically for excellent performance and amazing sound every time!

The PK108A PA loudspeaker stands head and shoulders above the rest of the pack and delivers exceptional performance, even when pushed to the limit. Lightweight and powerful, with custom designed transducers, massive power handling and extreme portability, the PK108A loudspeaker is ideal for any music application.

Notes: The PK110 is a super compact, exceptional 2-way, 500-Watt PA sound-reinforcement loudspeaker with Ultra-Wide sound dispersion and portability that is ideal for live sound, portable PA, monitor wedge and House of Worship applications. This amazingly versatile passive loudspeaker is ultra-and easy to carry and feature pole integrated in the housing and built-in screw thread for easy setup and hanging. Sound reinforcement has never been so easy!

The LF and HF transducers are designed specifically for each application - it's what sets us apart from the competition. When you buy a Behringer loudspeaker, you can rest assured that the transducers inside have been engineered to perform flawlessly in conjunction with every other element for truly professional results. The PK110 cranks out Incredibly deep bass and acoustic power with articulate, detailed mids and exceptional highs.

The PK110 features a powerful 10" long-excursion low-frequency driver for powerful bass, a 1'' compression driver mounted on an ultra-wide dispersion, large-format exponential horn for exceptional high-frequency reproduction. These speaker components were designed specifically for excellent performance and amazing sound every time!

Big here, small there, lots of this, just a touch of that - we all have our own personal preferences, but the PK110 puts it all in a convenient, easy to carry package - and really packs a massive punch with power handling up to 500 Watts. Lightweight of PK110 make it easy to lift and transport - and the great-sound is supremely affordable.

The PK110 PA loudspeaker stands head and shoulders above the rest of the pack and delivers exceptional performance, even when pushed to the limit. Lightweight and powerful, with custom designed transducers, massive power handling and extreme portability, the PK110 loudspeaker is ideal for any music application.

Notes: The PK110A is a super compact, exceptional 2-way, 350-Watt powered PA sound-reinforcement loudspeaker with built-in media player and Bluetooth* that is ideal for live sound, portable PA, Karaoke, monitor wedge and House of Worship applications.

This amazingly self-contained PA solution that merges state-of-the-art, 350-Watt Class-AB power amp technology with an integrated 2-channel mixer and standalone microphone channel, built-in Bluetooth, a high-performance MP3 player with USB stick/SD/MMC card and exceptional portability. A convenient Power Line output allows you to connect multiple PK110 passive speakers while fast-link Bluetooth* connectivity allows true stereo reproduction with another PK108A and PK110A. Sound reinforcement has never been so easy!

Your music lives on your phone, computer or tablet, so Behringer have made it easy to access and play through the PK110A. With a simple swipe of your finger, you can instantly stream all your favorite music from any Bluetooth-equipped device, such as your computer, smart phone or tablet. Streaming music via Bluetooth Technology opens a tremendous amount of available content, such as a virtually limitless array of online radio-channels, multimedia providers and much more. Just pressing the linking button on PK110A will fast-link with another PK108A or PK110A with true wireless stereo. Imagine that you have the whole PA at your fingertips; control the party from the dance floor, or the background music comfortably from your chair. Simple, easy and amazing.

The amazing PK110A features a built-in 2-channel mixers with the same ultra-low noise, high-headroom mic preamps that have made our mixers legendary. Also included is 2-band equalizer, plus Bluetooth for streaming audio directly from your device, and the individual Mic and Line inputs accept virtually any level signal you're likely to run across. Variable Input gain controls (with Clip LED) will have you dialing in the perfect level every time. The simple and intuitive user interface consists of a dedicated Level control per channel, a Master volume and separate controls for Treble and Bass.

One of the coolest features of the PK110A system is its embedded mp3 player. Just plug in your favorite playlist (via USB stick, SD, MMC card) and use the 6-button pad with its Mode, Play/Pause, Random, Rewind, Forward and fast-linking Bluetooth*. From break and background music to high resolution karaoke performance tracks, this mp3 player can handle it all. All PK series MP3 players comes with remote control included with up to 33 ft (10 m) of wireless freedom.

Our LF and HF transducers are designed specifically for each application - it's what sets us apart from the competition. When you buy a Behringer loudspeaker, you can rest assured that the transducers inside have been engineered to perform flawlessly in conjunction with every other element for truly professional results. The PK110A cranks out Incredibly deep bass and acoustic power with articulate, detailed mids and exceptional highs.

The PK110A features a powerful 10" long-excursion low-frequency driver for powerful bass, a 1'' compression driver mounted on an ultra-wide dispersion, large-format exponential horn for exceptional high-frequency reproduction. These speaker components were designed specifically for excellent performance and amazing sound every time!

The PK110A PA loudspeaker stands head and shoulders above the rest of the pack and delivers exceptional performance, even when pushed to the limit. Lightweight and powerful, with custom designed transducers, massive power handling and extreme portability, the PK110A loudspeaker is ideal for any music application.

Notes: ***B-STOCK: Product has light surface marks/scratches, but otherwise in perfect working condition***


Enter the Behringer CP35 ATTENUATORS Module. An authentic reproduction of the circuitry from the Modular 55, 35 and 15 Series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The CP35 features 4 passive attenuators with linked inputs and 4 separate outputs. Each attenuator knob can be used to adjust the level of the input signal passively from - 8 to unity gain. Connecting a single signal to the first input will allow it to pass to all 4 outputs to have up to 4 variations of a single signal source. Introducing a signal into the subsequent outputs will break the chain from the previous input. For example, if you have a signal in input 2, then this will feed into input 3 and 4 leaving input 1 to feed out of output 1. Having multiple inputs allows you to attenuate 4 separate signals and be more flexible with your tone.

Along with the standard outputs, the CP35 also features 6-volt outputs. These outputs give a reference voltage of -6 Volts out of one pair and +6 Volts out the other. Also included are two banks of 4-point multiple circuits for you to be able to route multiple copies of input signals to other modules. The CP35 can be a powerful addition to your synthesizer rig by allowing you to have multiple sources output to multiple modules so you can shape and sculpt sounds that are sure to blow everyone away!

Installing the CP35 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the CP35 to be mixed with other synth modules for a truly unique set up.

Notes: The EURORACK RACK is ideal for any Behringer Eurorack-style synthesizer or equipment. This desktop/rack-mount kit converts a 19" rack into an 84 HP Eurorack chassis. A compact 4 HP power supply with two flying bus boards are included together with a 3A universal power adapter. 52 sliding nuts allow you to easily position your modules so you can freely position your synth wherever you need it.

Notes: Eurorack module; two identical analog VCOs in one module.

Selectable waveforms: triangle, sawtooth and squarewave/pulse; adjustable pulsewidth and PWM CV input with attenuator; octave-switch and fine-tune control knob; hard and soft sync; 3 pitch CV inputs with attenuators;

Power consumption: 130mA (+12V) / 70mA (-12V); width: 16 HP; depth: 46mm

Notes: The ULTRA-DI PRO DI4000 gives you 4 first-class DI channels in a single rack space. Each channel is equipped with two Inputs (XLR and 14" TRS), a balanced XLR Output - and a 14" Link output to connect to your amp or monitor console. Plus, the DI4000 is designed to accommodate virtually any input signal, up to 40 dB of switchable input attenuation and up to 20 dB of gain, while our highly acclaimed OT-1 output transformers ensure pristine and powerful output.

Direct Injection (DI) boxes make it possible to connect guitars, basses and keyboards (as well as other line-level devices) to audio mixers and recorders. The DI4000 takes the DI box to the next level with a special 8 kHz High-Cut filter per channel for guitar applications, along with a Phase Reverse switch for optimal signal alignment. Additionally, our DI4000 active DI features "buffered" inputs that respect your source signal much better than passive DI boxes can - outputting optimally-balanced, extremely low-impedance (600 O) signals that are far less susceptible to noise and RF Interference (RFI).

The DI4000 does much more than just "bass guitar in, mic-level signal out". It really is a highly versatile input-signal toolkit. Here are just two advantages the DI4000 has over standard DI boxes: Maybe you'd like to connect your guitar amp's speaker output to your mixer? Not a problem, the DI4000 features two -20 dB attenuation switches per channel, allowing you to connect to speaker outputs rated up to 3,000 Watts - and convert them to balanced XLR outs! Weak incoming signal? The DI4000 has a +20 dB switch, which really comes in handy for boosting low-level input signals to balanced signals with real power and rock-solid impact. Worried about fluctuating voltages in the venue? The DI 4000 is equipped with an internal switch-mode power supply that ranges from 100 to 240 V and automatically adapts to mains voltages wherever you go. Of course, the DI4000 provides a Link output for easy connection to other equipment, such as your onstage amplifiers and monitor consoles. Servo-balanced performance guarantees ultra-flat frequency response - and the gold-plated XLR output connectors provide reliable, low-noise operation. Per channel ground-lift switches eliminate ground-loop hum issues. The DI4000 does everything a standalone DI can do, and much more - times four!

Notes: Clone of the Moog 921B module, a free-running LFO or oscillator driven by the accompanying 921A oscillator driver module. An affordable entry point to classic Moog-inspired sounds.

Supplier's Notes:
Enter the Behringer 921B OSCILLATOR. An authentic reproduction of the circuitry from the "Modular 55 and 35" series oscillators used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 921B OSCILLATOR module is controlled by the Behringer 921A OSCILLATOR DRIVER or can be used as a free-running LFO. Separate Frequency and Range knobs allow you to adjust the frequency range in semitones and in octaves. The 921B along with the 921A modules form the foundation of a proper modular synthesizer and the basis for some really great music.

The 921B OSCILLATOR features independent audio outs for each of the 4 waveforms which include sine, triangular, sawtooth and rectangular which can be patched out to different modules to unlock even more creative possibilities. A dedicated oscillator sync input and switch can be used to sync the 921B to a signal introduced into the Sync In jack. Parallel link jacks allow the 921B to link to other 921B in the chain.

Installing the 921B OSICLLATOR is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 921B OSICLLATOR to be mixed with other synth modules for a truly unique set up.

Notes: Behringer Eurorack Stand 3-Tier; desktop stand for mounting up to 3 Eurorack 104 cases (item 463669), or 3 Behringer synthesizers (e.g. Pro-1, Wasp Deluxe, K-2, Neutron, Model D, Cat).

Variable width (70 HP, 80 HHP or 104 HP); rugged aluminum/steel construction.

Notes: Killer value two-channel mic and line pre-amp with 12AX7 valves to add analogue warmth. Great entry-level option for recording, processing or adding character during a mix.

Supplier's Notes:
Tubes can really warm up a signal fast, giving it increased depth and character. Though transistors have succeeded the technology, many musicians agree that tubes deliver a far superior sound. A true audiophile 2-channel Mic/Line preamplifier, the ULTRA GAIN PRO MIC2200's hand selected 12AX7 vacuum tube gives everything from microphones to acoustic or bass guitars that vintage tube vibe in a dependable and highly-affordable package. The onboard fully parametric EQs provide unparalleled tonal characteristics, allowing you to sculpt instrument and vocal sounds with the ultimate precision and musicality.

The MIC 2200 is perfect for studio and live applications. The balanced 1/4" TRS and gold-plated XLR inputs and outputs give you maximum flexibility in either scenario. It derives its personality from a hand-selected 12AX7 tube for superior tube character and low-noise operation. The MIC 2200 is ideally suited for use with standard digital recorders and sound cards, imbuing signals with the warmth, presence and classic tube-compression that will bring your digital tracks to life.

The incredible MIC2200's controls consist of: switches for +48 V phantom power, Phase Reverse, Lo Cut, EQ Frequency Range and EQ In/Out; plus Mic Gain, Lo Cut Frequency Octave Bandwidth, Level and Output knobs. A 12-segment LED meter provides accurate monitoring of output levels. And when used as a high-end DI (Direct Injection) box in the studio or on the stage, the MIC2200 delivers flawless performance and outstanding signal integrity. For further tone conditioning, the MIC2200 features a fully parametric EQ with adjustable center Frequency, Bandwidth and Level per channel. Both channels also feature independent phase reverse switches for maximum versatility.

The ULTRAGAIN PRO MIC2200 gives you the sound quality of a 2-channel vintage tube preamp and high-end DI box all-in-one - at a mere fraction of what a true relic of the 1960s would cost.

Notes: The POWERPLAY P1 Personal In-Ear Monitor (IEM) Amplifier puts control where it's most useful - right at the artist's fingertips. Whether on stage or in the studio, the P1 provides performers and recording artists with a dependable and affordable personal monitoring solution.

The P1's high-power headphone output ensures that as the band gets louder, you'll still be able to hear every nuance of your performance. And the P1's simple user interface makes it easy for everyone to dial in a perfect mix every time.

Using the P1 also helps protect your hearing in two ways. First, thanks to a built-in current limiter, unexpected peaks in signal level won't get to your ears. Second, the simple act of wearing headphones or earbuds helps isolate your ears from loud stage volume of instrument amps and monitor wedges. With the P1, you can clearly hear your own performance and blend in the ideal amount of the rest of the band.

Dual XLR inputs allow 2-channel, mono or stereo operation with a convenient mix function which allows you to run two sources into the P1 and dial-in exactly what you want to hear as you perform. Two simple controls, Level and Balance, help you achieve the perfect mix in an instant. The P1 lets you take control of what you hear and allows the engineer to concentrate on providing the audience the best listening experience. Plus, setup is so fast and easy, letting you concentrate on putting on the best performance when you hit the stage.

One little 9 V battery lasts up to 12 hours, so the P1 will go as long as your next show or studio recording session! Or, use the optional PSU-SB DC power supply for the ultimate in dependable power. And the P1's metal chassis is built like a tank to handle even your most-demanding and energetic performance. Small enough to hang on your belt - or mount on a mic or drum stand, the P1 puts complete balance and volume control in your hands.

Notes: The EP4000 builds on the incredible legacy of our EP2500, which is one of the best-selling power amps in the industry. Our proprietary Accelerated Transient Response (ATR) Technology gives the EP4000 the massive power reserves needed for deep and impactful bass response, which translates into a more natural sound quality that will bring your audience to its feet - and keep them there! With an amazing 4,000-Watts of output power (2 x 2,000 Watts @ 2 Ohms; 2 x 1,400 Watts @ 4 Ohms; 4,000 Watts @ 4 Ohms in Bridge mode), the EP4000 is the perfect amplifier for medium-sized club gigs, mobile PA systems, church services or public spaces.

The uber-simple front panel controls of these amps give you all of your sound's vital signs at a glance. After flipping the Main switch, the Power LED will light when the amp is ready for action. Both channels have independent gain dials as well as Clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also Signal LEDs that light up when a signal is present at the input.

It takes huge pulses of energy (current and voltage) to propel a woofer cone fast enough to match a bass beat. That's called Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, the EP4000 reacts instantly to even the most demanding bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

The rear panel of every EUROPOWER EP4000 sports an array of options to help you get the most out of your amp. The built-in Clip Limiter automatically senses when the amplifier is being driven into "clipping" and momentarily reduces the input level to avoid distortion. This all happens in mere micro-seconds, making it the ideal way to ensure perfect sound all the time.

Stage vibrations, mic thumps and wind noise can cause ultra-low frequency sounds, or infrasonics - and while technically inaudible, they can be a real drain on power resources. As a solution, the EP4000 features a defeatable Low Cut Filter that eliminates frequencies below either 50 or 30 Hz (depending on your PA system's capabilities) - for better sonic performance, as well as the ultimate in loudspeaker protection. The rear panel also contains the Stereo or Bridge (mono) mode switches.

There are lots of awesome features on the outside of the EP4000, but this amplifier's beauty goes much more than just skin-deep. Inside you'll find industry-leading components, such as world-class Toshiba/Fairchild power transistors, and a custom-designed, high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers. The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps the comfortably EP4000 within its normal operating range. Finally, an impact-resistant, all-steel 2U rack-mount chassis protects your investment from the rigors of the road.

Notes: The EP2000 has become one of the best-selling power amps in the industry. Our proprietary Accelerated Transient Response (ATR) Technology gives the EP2000 the massive power reserves needed for deep and impactful bass response, which translates into a more natural sound quality that will bring your audience to its feet - and keep them there! With an amazing 2,000-Watts of output power (2 x 1,000 Watts @ 2 Ohms; 2 x 750 Watts @ 4 Ohms; 2,000 Watts @ 4 Ohms in Bridge mode), the EP2000 is the perfect amplifier for medium- sized club gigs, mobile PA systems, church services or public spaces.

The uber-simple front panel controls of the EP2000 provides all of your amp's vital signs at a glance. After flipping the Main switch, the Power LED will light when the amp is ready for action. Each of the 2 channels feature dedicated Gain controls and Signal LEDs, that light up when a signal is present at the input, as well as Clip LEDs to indicate when input adjustments are required.

It takes huge pulses of energy (current and voltage) to propel a woofer cone fast enough to match a bass beat. That's called ATR or Accelerated Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, our amps react instantly to even the most demanding bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

The rear panel of every EUROPOWER EP2000 sports an array of options to help you get the most out of your amp. The built-in Clip Limiter automatically senses when the amplifier is being driven into "clipping" and momentarily reduces the input level to avoid distortion. This all happens in mere micro-seconds, making it the ideal way to ensure perfect sound all the time.

Stage vibrations, mic thumps and wind noise can cause ultra-low frequency sounds, or infrasonics - and while technically inaudible, they can be a real drain on power resources. As a solution, the EP4000 features a defeatable Low Cut Filter that eliminates frequencies below either 50 or 30 Hz (depending on your PA system's capabilities) - for better sonic performance, as well as the ultimate in loudspeaker protection. The rear panel also contains the Stereo or Bridge (mono) mode switches.

There are lots of awesome features on the outside of the EP2000, but this amplifier's beauty goes much more than just skin-deep. Inside you'll find industry-leading components, such as world-class Toshiba/Fairchild power transistors, and a custom-designed, high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers. The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps the comfortably EP2000 within its normal operating range. Finally, an impact-resistant, all-steel 2U rack-mount chassis protects your investment from the rigors of the road.

There are lots of awesome features on the outside of the EP2000, but this amplifier's beauty goes much more than just skin-deep. Inside you'll find industry-leading components, such as world-class Toshiba/Fairchild power transistors, and a custom-designed, high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers. The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps the comfortably EP2000 within its normal operating range. Finally, an impact-resistant, all-steel 2U rack-mount chassis protects your investment from the rigors of the road.

Notes: An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard EURORACK case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 960 SEQUENCER CONTROLLER is an 8-step sequencer with 3 rows of CV controls for adjusting the pitch of a signal at that stage. An additional 9th step can be used to stop the sequence. Plug in a Behringer 962 SEQUENTIAL SWITCH and transform the 960 from an 8-step sequencer into a 24-step giant capable of creating more intricate sequences and beats.

More sequence variations can be achieved by switching any of the desired Stage Mode switches to Normal, which lets the current stage proceed to the next one; Skip, which lets you bypass the stage; or Stop, to freeze the sequence. You can even manually trigger each stage by pressing the respective Set button. Create an 8-step sequence then set the 960 to skip every other stage to have a staccato rhythm and spice up a song.

The 960 also comes with an oscillator where you can adjust the oscillator range or pitch with the Frequency Range knob and fine tune that with the Frequency Vernier knob. You can also manually start or stop the oscillator with the on and off buttons or connect an external gate signal to control the on/off status. A control input is available for you to connect another module to tweak the oscillator frequency of the 960 and expand its flexibility.

Installing the 960 SEQUENCER CONTROLLER is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 960 SEQUENCER CONTROLLER to be mixed with other synth modules for a truly unique set up.

100 mA +12V
50 mA -12V
0 mA 5V
47 mm deep
O 5.00

Inputs:
Oscillator on/off
Type
2 x 3.5 mm TS jacks, AC coupled

Impedance: >3 kO, unbalanced

Maximum input level : +5 V

Minimum switching threshold:
Control input
Type: 3.5 mm TS jack, 1 V/oct

Impedance: 100 kO, unbalanced

Maximum input level : i2 V, vernier set to 5

Shift input
Type: 3.5 mm TS jack, DC coupled

Impedance: 7 kO, unbalanced

Maximum input level : i5 V

Minimum switching threshold: +1.5 V

Stage triggers: Type
8 x 3.5 mm TS jacks, AC coupled

Impedance: >3 kO, unbalanced

Maximum input level : +5 V

Minimum switching threshold: +3.5 V trigger

Outputs
Row outputs
Type: 6 x 3.5 mm TS jacks, DC coupled

Impedance: 500 O, unbalanced

Maximum output level: +8 V (range X4)

Stage trigger outputs: Type
8 x 3.5 mm TS jacks, DC coupled

Impedance: 250 O, unbalanced

Maximum output level: +5 V, active high

Oscillator output
Type: 3.5 mm TS jack, DC coupled

Impedance: 4 kO, unbalanced

Maximum output level: +4 dBu

Duty cycle: 90%

Controls:
Frequency range:
1 (0.04 to 0.5 Hz), 2 (2.75 to 30 Hz)

3 (0.17 to 2 Hz), 4 (11 to 130 Hz)

5 (0.7 to 8 Hz), 6 (44 to 500 Hz)

Frequency vernier: Tune the oscillator range, 3 octave range

Oscillator on/off
Manually start or stop the oscillator

Voltage knobs
-8 to max voltage set by the range switch

Mode switch
Skip stage, play stage, stop sequencer

Set
Manually select stage

Range switches
X1 (+2 V), X2 (+4 V), X4 (+8 V) max. output

Timing on/off
Allows 3rd row knobs to control stage duration

Shift button
Manually skip to next stage

Power supply: Eurorack

Current draw: 100 mA (+12 V), 50 mA (-12 V)

Physical Dimensions: 284 x 129 x 47 mm (11.2 x 5.1 x 1.9")

Rack units: 56 HP

Weight: 0.64 kg (1.41 lbs)

Notes: The Behringer Pro-1 is a clone of the popular retro classic Sequential Circuits Pro-One which was once conceived to be a monophonic Prophet-5. Those who know and love recordings of Depeche Mode and Yazoo, will enjoy recognizing a lot of those sounds with the Pro-1.

The two assertive oscillators, each based on a CEM3340 chip, have sawtooth and square waveforms, an octave switch, fine tuning and pulse width control. Oscillator A can be synchronized to oscillator B, the second tone generator is additionally equipped with the triangle waveform and can be switched to low mode as well as decoupled from the pitch control. Both VCOs are brought together in the mixer, where the noise generator is also located, which can be replaced by an external signal. The beautiful basic sound is processed with a characterful 24dB lowpass filter, also known as Curtis VCF. It behaves similar to a Moog filter, but due to the IC CEM3320 it sounds different than the transistor cascade. The two crisp ADSR envelopes are assigned to the filter and VCA. An LFO with three waveforms is connected to the targets via the modulation bus. The special features of this instrument include the waveforms that can be activated simultaneously in both oscillators and in the LFO.

The modulations are assigned on the left side of the control panel. The filter envelope, oscillator B and the LFO, each with their own attenuator, are available in parallel as sources. These are assigned to the targets frequency oscillator A+B, pulse width oscillator A+B and cutoff directly or via the modulation wheel (or midi controller). Wild oscillator drifts, sync sounds, sirens, FM for filter and/or oscillator A as well as pulse width modulation are possible if used with care. If you turn everything up at once, it gets really wild! The modulation bus is the hottest feature of the Pro-1 next to the sound.

The ingeniously simple sequencer provides access to two patterns, each of which can be up to 40 steps long; pauses can also be programmed. The notes are played via a connected MIDI keyboard. After the input, the patterns can be transposed with the keyboard. The Arpeggiator primarily offers the playback modes Up and Up&Down, but can also be integrated into the pattern. Synchronization to other equipment is done via the analog clock input or MIDI/USB.

Notes: No prizes for guessing that this one's inspired by the legendary Moog 904-A filter, but offered at Behringer's hugely tempting affordable price point. Silky, fat filter with tons of character.

Supplier notes:
Enter the Behringer 904A VOLTAGE CONTROLLED LOW PASS FILTER Module. A vintage-sounding authentic reproduction of the circuitry from the Modular 55, 35 & 15 Series from the 70s used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

FILTER Module. A vintage-sounding authentic reproduction of the circuitry from the Modular 55, 35 & 15 Series from the 70s used by the world's most famous pop, rock and jazz musicians for their shows. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 904A VOLTAGE CONTROLLED LOW PASS FILTER features a cutoff frequency knob that lets you decide which frequencies to attenuate. The resulting frequency is determined by this knob giving you the ability to change your sound with one turn.

Three Control Inputs plus audio ins and outs are available to send the processed signal to other modules and to connect voltage signals from other modules to affect the cutoff frequency.

The 904A VOLTAGE CONTROLLED LOW PASS FILTER provides you control of the resulting frequency and internal feedback with the Fixed Control Voltage and the Regeneration knob. A switch also allows you to command the frequency range by letting you decide which frequency band you want to operate in. This gives you real-time access to all important parameters with one module.

Notes: Enter the Behringer 903A RANDOM SIGNAL GENERATOR Module, a vintage-sounding noise generator from the '70s. An authentic reproduction of the circuitry from the "Modular 55" series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

Enter the Behringer 903A RANDOM SIGNAL GENERATOR Module, a vintage-sounding noise generator from the '70s. An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now, musicians can build their very own, unique, synthesizer that can fit in a standard Eurorack case for a very affordable price. Mix and match specific modules to create your personal, unique synth to complement the music you play or go all out and fill a room, from floor to ceiling, with modules that'll fulfill any synth geek's wildest dream.

The 903A RANDOM SIGNAL GENERATOR generates both white and pink noise via two 3.5 mm outputs each allowing you to send different signals to other modules in your rig.

Installing the 903A RANDOM SIGNAL GENERATOR is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 903A RANDOM SIGNAL GENERATOR to be mixed with other synth modules for a truly unique set up.