An authentic reproduction of the circuitry from the Modular 55 series used by the world's most famous pop, rock and jazz musicians. Now you can build your very own, unique synthesizer that can fit in a standard EURORACK case for a very affordable price. Mix and match with specific modules to customize your synth and complement the genre of music you play or go all out and have a room filled from floor to ceiling with modules that'll fulfill any synth geek's wildest dreams.

The 960 SEQUENCER CONTROLLER is an 8-step sequencer with 3 rows of CV controls for adjusting the pitch of a signal at that stage. An additional 9th step can be used to stop the sequence. Plug in a Behringer 962 SEQUENTIAL SWITCH and transform the 960 from an 8-step sequencer into a 24-step giant capable of creating more intricate sequences and beats.

More sequence variations can be achieved by switching any of the desired Stage Mode switches to Normal, which lets the current stage proceed to the next one; Skip, which lets you bypass the stage; or Stop, to freeze the sequence. You can even manually trigger each stage by pressing the respective Set button. Create an 8-step sequence then set the 960 to skip every other stage to have a staccato rhythm and spice up a song.

The 960 also comes with an oscillator where you can adjust the oscillator range or pitch with the Frequency Range knob and fine tune that with the Frequency Vernier knob. You can also manually start or stop the oscillator with the on and off buttons or connect an external gate signal to control the on / off status. A control input is available for you to connect another module to tweak the oscillator frequency of the 960 and expand its flexibility.

Installing the 960 SEQUENCER CONTROLLER is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 960 SEQUENCER CONTROLLER to be mixed with other synth modules for a truly unique set up.

100 mA +12V
50 mA -12V
0 mA 5V
47 mm deep
O 5.00

Inputs:
Oscillator on / off
Type
2 x 3.5 mm TS jacks, AC coupled

Impedance: >3 kO, unbalanced

Maximum input level : +5 V

Minimum switching threshold:
Control input
Type: 3.5 mm TS jack, 1 V / oct

Impedance: 100 kO, unbalanced

Maximum input level : i2 V, vernier set to 5

Shift input
Type: 3.5 mm TS jack, DC coupled

Impedance: 7 kO, unbalanced

Maximum input level : i5 V

Minimum switching threshold: +1.5 V

Stage triggers: Type
8 x 3.5 mm TS jacks, AC coupled

Impedance: >3 kO, unbalanced

Maximum input level : +5 V

Minimum switching threshold: +3.5 V trigger

Outputs
Row outputs
Type: 6 x 3.5 mm TS jacks, DC coupled

Impedance: 500 O, unbalanced

Maximum output level: +8 V (range X4)

Stage trigger outputs: Type
8 x 3.5 mm TS jacks, DC coupled

Impedance: 250 O, unbalanced

Maximum output level: +5 V, active high

Oscillator output
Type: 3.5 mm TS jack, DC coupled

Impedance: 4 kO, unbalanced

Maximum output level: +4 dBu

Duty cycle: 90%

Controls:
Frequency range:
1 (0.04 to 0.5 Hz), 2 (2.75 to 30 Hz)

3 (0.17 to 2 Hz), 4 (11 to 130 Hz)

5 (0.7 to 8 Hz), 6 (44 to 500 Hz)

Frequency vernier: Tune the oscillator range, 3 octave range

Oscillator on / off
Manually start or stop the oscillator

Voltage knobs
-8 to max voltage set by the range switch

Mode switch
Skip stage, play stage, stop sequencer

Set
Manually select stage

Range switches
X1 (+2 V), X2 (+4 V), X4 (+8 V) max. output

Timing on / off
Allows 3rd row knobs to control stage duration

Shift button
Manually skip to next stage

Power supply: Eurorack

Current draw: 100 mA (+12 V), 50 mA (-12 V)

Physical Dimensions: 284 x 129 x 47 mm (11.2 x 5.1 x 1.9")

Rack units: 56 HP

Weight: 0.64 kg (1.41 lbs)