Search dance music

Notes: The first outing for KMA's unique and custom AI driven True Double Tracker technology was in the ENDGAME, their powerhouse end-of-chain pedal. KMA designed their dead-simple-to-use, TDT Algorithm in ENDGAME to be as authentic to the doubling recording process as possible, but they realise that not everybody needs all the bells and whistles of such an all-encompassing device.

However, the processing power requirements required for TDT meant a simpler device wasn't yet possible. But as demand from the community grew, KMA's team worked hard to squeeze it down and make it happen.

So, meet GEMINUS - all of KMA's True Double Tracker goodness in a compact pedal that's suitable for any board. Whether playing live or recording with a single instrument, GEMINUS is the perfect solution for adding "fatness" and "width" to your performances - it really does feel like you are playing the same riff twice!


Enabled via the soft bypass footswitch, GEMINUS accurately replicates the minor differences that exist between two separate recordings. The TDT WIDTH control spreads your doubled tracks, anywhere from completely centred (0%) to 50% left and right (centre indent) and 100% left and right split.



KMA has carried out extensive research on how to make double tracking sound exactly how they think it should perform. In the process, they've spent thousands of engineering hours working on our own proprietary technology, even developing their own custom neural network AI with onset detection in the process for our algorithms.

The mode for the TRS input and output jacks is selected by the toggle switch. You can choose between stereo in and out, mono in and stereo out or mono in to mono out, so no matter your signal and tonal desires, GEMINUS will fit into your rig with ease.

For the most accurate performance (and just like the real double tracking scenario in the studio), their custom True Double Tracker algorithm should ideally be fed with a mono signal. Obviously if you are trying to emulate what traditionally happens in the studio, you wouldn't normally double up a stereo source. Having said that, the TDT algorithm has been optimised to still have a useful and very pleasing widening effect on stereo input signals, just take care that using too much doubling on some stereo sources may cause your carefully crafted reverb, delay or other modulation effects to turn to mush or even add phase issues.

To help tailor the Doubling to your own taste, the TIME control changes the timing range of the doubled AI-driven onset detection. Essentially, it's all about the tightness of the doubled signal to fit differing playing styles. Variable from an extra tight mode, that's perfect for extra fast riffs, to a looser timing that can just the right amount of density to more open playing styles, this control is a powerful weapon to make your riffs fit your musical goals. The centre detent is GEMINUS' default factory position, but turning the knob left will give a tighter feel. Crank the knob to the right and the doubled signal becomes much more relaxed.


While the LEVEL control affects the balance of the doubled signal against the original source. Useful for those times where you might want maximum width, but a little less (or even more) of the sound to be doubled against the original. Centre detent of the knob is GEMINUS' default factory position. There's some clever panning stuff going on under the hood here too, so neither the doubled or original signal is louder on one side or the other, when in Stereo.

Finally, the new PITCH selector switch can add some additional movement to your doubled signal, extending the usefulness of GEMINUS beyond standard doubling. When the switch is at the centre default position (-) there is no pitch adjustment, (~) adds some subtle modulation, while (?) adds even more wobble. In this mode, it doesn't mean that your second guitarist will sound like they are off on a quest for enlightenment all on their own (!), it is just super handy for those times when you want more chaos and instability in your ensemble.

To top it all off, they've added a switchable real True/Buffered bypass and 'silent' relay-based soft switching. When KMA were testing our new pedal platform, they really loved the clarity and signal integrity of KMA's Buffered Bypass, plus there are zero clicks and pops when switching in this mode, which is why it is the recommended and default mode on shipping. However, they know some players have some special devices like extra fussy vintage fuzz pedals and the like, so they added the ability to select True Bypass mode via an internal dip switch.

Phew, seems that there's quite a lot going inside GEMINUS then. We believe our True Double-Tracker in this pedal is the best sounding, yet easiest to use doubler you'll ever play - period.


Go forth and multiply your riffs!


Product Type:

Stereo True-Double-Tracker (Proprietary Doubler) pedal

Bypass Type:

Switchable True/Buffered Bypass with 'silent' relay-based soft switching

Power Supply Requirements:

9 V DC - Centre (-) negative 2.1mm

Current Draw (max):

< 100 mA

Product Dimensions / Weight:

H: 60 mm / 2.36 inch
W: 74 mm / 2.91 inch
D: 128 mm / 5.04 inch
Weight: 350 g / 12.35 ounces

Review: Bob Geldof plays Pink, a burned out rock star holed up in a Los Angeles hotel. He reminisces on his life, from his wartime birth to his present circumstances. The film contains no dialogue; rather the narrative is carried by the Pink Floyd soundtrack and the Gerald Scarfe animation.

Region code: 2

Notes: The Resor 3300 is Resor's latest addition to the rotary mixers. It features a fully discrete class-A Master Isolator, 3-Band EQ per channel, a dedicated Microphone input with volume control, four Phono/Line preamps, Urei-style knobs, and more.

With this model, Resor bring an all-new discrete master Isolator developed over six months. The new class-A circuitry carries over the 24 dB /Oct filters, crossover frequencies, bypass Relay, and a "full cut" to a maximum boost of +12 dB. With the staggering number of components, including 28 BJT and 32 FET transistors, Resor have achieved outstanding performance in sound and measures.

The 3-band channel EQ is an entirely new design. It brings a fresh set of frequency curves and attenuation levels across all three bands, a lower noise floor, and retaining the discrete Op-Amp on duty.

There is a different curve across these two segments, with the Isolator having a more pronounced sweep and colour. In use, this means that per channel, you get to craft your sound via the EQ and then craft further still with a different tonal balance with the Isolator.

Across the EQ and Isolator, plenty of headroom is available across all frequency ranges, providing plenty of control when crafting the audio.

Each of its four channels features hi-fi Phono and Line inputs. With Phono preamps delivering 44 dB of Gain, both vinyl and digital are well-balanced. Further refinements on the Phono preamps gave us even more pleasing dynamics, headroom, and a broader frequency spectrum.

Resor offer an additional element of customisation that one can specify when they place their order, ranging from adding an FX-bus, changing the combination of colours for the faceplate to different wood finishes and knob options.

Inputs

Channels 1-4: selectable PHONO & LINE (RCA)
Microphone: dedicated XLR with own control

Outputs

Master 1: Balanced XLR
Master 2: Unbalanced RCA
Booth: Balanced TRS
Rec: Unbalanced RCA

Channel EQ

3 Band Baxandall: Bass +/- 18 dB (at 150 Hz), Mids +/-
10 (at 800 Hz), Treble: +/- 10dB (at 10 kHz)

Master isolator

Fully discrete class-A circuitry
3 Band, 24 dB /Oct, Linkwitz-Riley filters, crossover
frequencies at 310 Hz and 3100 Hz,
Full-cut to maximum +12 dB, ON/OFF true bypass with
Audio Grade Relay

Master insert

Out: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground) - post Master Isolator
In: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground) - pre Outputs

3300 FX (Send and Return)

Effects Out: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground)
Effects In: Stereo TRS (Tip - Left, Ring - Right, Sleeve - Ground)

Customisations

Wood: Natural Oak, Matte Black, Walnut
Faceplate (Matte Aluminum): Black, Bronze, SIlver;
Premium Metallic Red, Metallic Green, Metallic Blue
Knobs style: Resor Standard, Urei knobs; Premium
knobs: Silver Matte Aluminum, Black Matte Aluminum
VU-Meters: Standard, 4x Round (one per channel)

Other

2 x Analog VU Meters (1VRMS = 0db)
Cue/Mix Switch for the VU Meters, to display either the
Cue or Mix signals
Rotary Switch to CUE between all four Channels
Cue/Mix Blend potentiometer
Audio Grade external Power Supply Unit
3 Years International Warranty

Line Inputs

Discrete, Class-A Op-Amps
Measured Line In to Master Out:
Frequency response +/- 0,3 dB, 20 Hz to 20 kHz
THD+N better than 0,004 %
SNR better than -95 dB

Phono Inputs

Discrete, Class-A Op-Amps, Gain 44 dB
Passive RIAA Equalization, polypropylene capacitors, close tolerance
Input impedance is 47 kohm
Input capacitance is 47 pF
Measured Phono In to Master Out:
RIAA accuracy within +/- 0,3 dB (20 Hz - 20 kHz)
THD+N better than 0,02 %
SNR better than -77 dB
Maximum input signal level before distortion 100 mVRMS

Master Output

Balanced XLR
Unbalanced RCA L and R
Impedance < 300 ohm

Booth Output

Balanced TRS
Impedance < 300 ohm

Record Output

Nominal level -10dBV
Impedance < 300 ohm

Crosstalk

Channel Fader offness < -100 dB
Channel L/R separation <-70 dB
Isolator offness < -90 dB

Dimensions

330 mm (W), 275 mm (D), 98 mm (Height - measured from the faceplate and including the rubber feets)

Weight

Mixer: 5.3 KGS
Power Supply: 1 KGS
With travel case: 11 KGS

Notes: Rack power bringing 2.5A (2500mA) on both the +12V and -12V rails. There is a 5V rail, but it pulls from the +12V rail, up to 750mA. So only use the +5V rail if you have to.

Comes with 12-position flying bus cable and wall power supply. The wall power supply is the same unit as After Later Audio use on their cases, so there's plenty of headroom and you don't have to worry about memorizing which amperage is for which.

This should be roughly enough for 2 rows of modules in a 104hp case. If you just need power for 1 row, check out our Warp Drive module.

Notes: FM & Vector Synthesis

Two icons of the '80s in one unit

Introducing Vecor Wave from RYK Modular bringing together the awesome power of 16 oscillator FM, combined with Vector synthesis OR true multi voice polyphony.

The Vector Wave is a feature packed compact Eurorack module, which can be used as a stand alone synth-voice without the need for external VCA,ENV, LFOs etc.

Features

16 oscillators, divided into 4 banks, oscillators can freely configured into series or parallel combinations for complex FM or additive synthesis

A cute Vector Joystick for morphing between oscillator banks, for cool performance timbre sweeps and sonic movement
Vectors can be recorded from the joystick and replayed from trigger sources, or animated from external or internal modulation sources

Super cool retro Big-Pixel screen, ideal for nostalgia freaks or the visually impaired

Wave Warping brings grit and aggression to the FM synthesis with oscillators continuously variable between Sine,Tri-ish Saw, Pulse waveforms

Wave Folding for subtle to extreme sonic bending

Two Envelope generators [ per voice in polyphonic modes ], and two LFOs with all controls assignable as modulation destinations

Intuitive Modulation Slot patching from external and internal sources to be routed to any parameter within the Vector Wave

30 User Voice storage spaces for storing your synth masterpieces to internal memory, enabling you to impress your friends at a later date

Thee modes of oscillator bank allocation Monophonic Vector, and Polyphonic Voice, and Multitimbral Polyphonic

MIDI input for a spaghetti-free Polyphonic setup, velocity, aftertouch and MIDI CCs avail- able as modulation sources

Slim but handsome Expander Module also available that adds 3 more V/oct and Gate inputs, for maximum mutli-voice multitimbral melodious mayhem!

Notes: Add 3 more V/Oct and Gate inputs to your Vector Wave with the Expander

The Vector Wave Expander module from RYK Modular allows you to use CV and Gate to control the Vector Wave as a 4 Voice multi-timbral synth module.

And it looks nice.

Features:

3HP

Notes: A sequencer and a filter-bank got together...

...And a love child was born !

Introducing NIGHT RIDER, from RYK Modular

Four multi model filters with stereo capability, combined with a six-stage four-channel modulation sequencer.

Finally a filter bank that unifies the control of multiple parameters, enabling a spaghetti-free approach to formant animation fun.

NIGHT RIDER cleverly turns the dials to where you want them, when you want, via it's unique modulation sequencer

Create dreamy swooshing 70's phaser filter sweeps
Phenomenal for phoneme vocal formant rasps and wheezes
Plucking great for strumming Karplus Strong twangs, and pinging filter pings!
Or, turn your silk into shredded cabbage, with the built in bad-ass clipping-saturator

Technical specifications

Frequency range - from rumble to wispy
Resonance/Feedback range - from tame to insane
Individual Filter levels - silent to beyond 11, for serious saturation-clipped sonic destruction

Features:

Four filter blocks, with multiple models , including:
6db BPF [ pingable ]
12db BPF [ pingable ]
12db variable width BPF
Comb Filter for Karplus Strom [ pluckable & flanger vibes ]
All Pass filter [ crazy Phaser vibes ]

Dual Input and Stereo output, with Pan control for each filter in the stereo field. Input can
be Mono [ CH1 - 1,2,3,4 ] or Dual [ CH1-1,2 CH2 - 3,4 ]
Modulation Sequencer capable of being clocked, scanned, and interpolated
CV inputs for sequencer Interpolated scanning, 1V/Oct frequency offset, Slew amount,
Resonance amount, Clock or MIDI clock input for sequence animation, MIDI CC
Memory slots for storing and retrieving Filter and animation setups, and retrieving preset formant, and chord based Filter setups

Vital stats:

Width 16 HP
Depth 25mm

52mA +12V
9mA -12V
0mA 5V

Notes: One of the most reliable brands of portable recorders turn out the goods once again. The H5studio records up to six tracks simultaneously, and also functions as a 4-in/2-out USB interface. High quality and versatile.

Supplier's Notes:
The H5studio was made for seamless and professional production. Creators can record flawless audio with stunningly clear microphones, studio-grade preamps, and 32-bit float recording.

The 19.4mm microphones capture audio with incredible frequency response, 140 dB max SPL, and an expansive dynamic range. Their increased size captures recordings with unmatched depth and clarity.

The H5studio features Zooms F-series preamps, giving your audio unmatched clarity (-127 dBu EIN). With dual AD converters and 32-bit float, it delivers an impressive 132dB dynamic range, capturing everything without noise or distortion.

32-bit float and 16/24-bit formats each have their advantages. 32-bit float prevents clipping but requires post-production. 16/24-bit eliminates the need for post-processing but requires gain adjustment to prevent clipping. The H5studio offers the best of both worlds with 32-bit float and dedicated gain knobs - no clipping and no need for post-production.

The H5studio captures up to six tracks (four iso-tracks plus a stereo mix) with sample rates up to 192 kHz.

Carefully engineered RF shielding keeps interference from smartphones and Wi-Fi routers out of your recordings, anywhere you go.

The H5studio features "advanced look-ahead" limiters which anticipate potential overloads and prevent distortion before it reaches your track.

The two locking XLR/TRS inputs support +48V phantom power and +4dBu line level. There is also a 3.5mm stereo jack with plug-in power.

The H5studio's 3.0 capsule system supports 32-bit float and gives creators more options to use the right mic for their recording.

Monitor input levels and real-time waveforms with the full color LCD, making it easy to adjust and monitor audio in real time.

Use the loud 20 mW headphone output to monitor or listen back to your recordings in any environment.

Use the 3.5mm stereo LINE OUT to connect directly to a camera, easily syncing your audio and video.

The built-in speaker has a maximum output of 250mW for previewing recordings on the spot.

The H5studio is a 4-in/2-out USB audio interface for Mac, Windows, iOS, and Android, supporting 32-bit float and 16/24-bit recording. Stream live and simultaneously record a backup to microSD.

Notes: Combine the upgrade kit with your headband and ear pads from any TMA-2 headphone to go wireless. Experience ultra-low latency wireless performance with more than 20 hours of battery life for uninterrupted sessions. Includes two S11 speaker drivers and the X03 W+ Link Transmitter.

Fully compatible with the TMA-2 Modular system Ultra-low latency wireless audio for cable free performance Powerful, detailed sound tuned to clearly present bass and treble details in loud venues Seamlessly switch between W+ Link for performing and Bluetooth for listening on the go Use the AIAIAI app EQ to shape the sound to your preference

Notes: EGL-1 is a desktop analogue synthesiser that is ideal for a variety of duties. The unit's sub-oscillator can be configured to determine the emitted waveform and decays when the Push switch is pressed. There are four LFOs routed to the primary VCO for bountiful modulation capabilities. The VCO itself is routed through a boost circuit for a some extra flair that's sure to punish listeners in all the right ways.

EGL-1 Features

VCO routed through boost circuit
4 LFOs provide ample modulation possibilities
Integrated sub-oscillator
Push switch causes the sub-oscillator to decay
Two types of modulation can be applied to the MAIN VCO (oscillator).

The bottom stage mixes four LFOs and allows you to adjust the input level to the MAIN VCO with the level.

The middle stage allows you to input a WAVE to the SUB OSC (another oscillator) with adjustable rise and fall of the oscillator, which can then be fed into the MAIN VCO.

The push-button in the top right-hand corner rapidly decays the power of the SUB OSC as long as it is pressed. While it decays, it has an effect on the sound of the MAIN VCO.

The MAIN VCO output also has an output circuit to make the sound more powerful.

The EGL-1 operates from a 9V centre-minus or battery. Neither is included.

Notes: It is powered by a center negative DC 9V adapter or a single 9V battery.

It contains two VCOs (oscillators) with a wide range.

The SUB oscillator has a different frequency and waveform, and is input to the main, respectively. Each of them has a range switch, so it works like an LFO under the switch. The color of the range switch (white, black) corresponds to the color of the SUB.1 and SUB.2 on-off switches next to the FREQ knob of the main oscillator.

When the WAVE switch is turned on, the WAVE knob is activated, and the SUB OSCILLATOR.1 and 2 are shaken.

The main VCO×2 is mixed and fed into the strain + filter circuit. This special filter has a FREQ knob and a TUNE knob. The TUNE knob powerfully amplifies the input signal while also tracking specific pronunciations.

The filter is a circuit that has been fine-tuned so that it can very effectively enhance the bass and treble of this input signal.

Unlike other switches, the noise-on switch moves sideways, left (VCO.1), middle (OFF), and right (VCO.2). They are populated in VCO.1 and 2, respectively.

It is a noise machine that can output a very strong signal that generates a variety of noise sounds.

This analogue synth runs on DC9V negative center or a 9V battery.

The main 2 VCOs can receive 2 oscillators and noise generator inside and go to 2 different filters.

2 oscillators can be tuned with each two FREQ. knobs and controlled with the wave knob.

RED switch is for wave knob working.

Black and White for tone of oscillators

Notes: Rack power bringing 1.25A (1250mA) on both the +12V and -12V rails. There is a 5V rail, but it pulls from the +12V rail, up to 750mA. So only use the +5V rail if you have to.

Comes with 12-position flying bus cable and wall power supply. The wall power supply is the same unit as After Later Audio use on their cases, so there's plenty of headroom and you don't have to worry about memorizing which amperage is for which.

This should be roughly enough for 1 rows of modules in a 104hp case. If you need power for 2 rows, check out The Force module.

Notes: LED CV 3.5mm mono patch cables

Visualise your patches like never before

Super slim aluminium barrel
Durable construction - Ultra flexible TPE cable
3.5mm mono jack connector

Compatibility

Works with CV patch signal, designed by us for modular and semi modular synthesisers
Great for Clocks, Gates and Trigger signals.

Please note: You may see a very small drop in voltage as the LED's do requires a small amount of power. May not be suitable for very voltage sensitive patches.

Notes: LED CV 3.5mm mono patch cables

Visualise your patches like never before

Super slim aluminium barrel
Durable construction - Ultra flexible TPE cable
3.5mm mono jack connector

Compatibility

Works with CV patch signal, designed by us for modular and semi modular synthesisers
Great for Clocks, Gates and Trigger signals.

Please note: You may see a very small drop in voltage as the LED's do requires a small amount of power. May not be suitable for very voltage sensitive patches.

Notes: LED CV 3.5mm mono patch cables

Visualise your patches like never before

Super slim aluminium barrel
Durable construction - Ultra flexible TPE cable
3.5mm mono jack connector

Compatibility

Works with CV patch signal, designed by us for modular and semi modular synthesisers
Great for Clocks, Gates and Trigger signals.

Please note: You may see a very small drop in voltage as the LED's do requires a small amount of power. May not be suitable for very voltage sensitive patches.

Notes: LED CV 3.5mm mono patch cables

Visualise your patches like never before

Super slim aluminium barrel
Durable construction - Ultra flexible TPE cable
3.5mm mono jack connector

Compatibility

Works with CV patch signal, designed by us for modular and semi modular synthesisers
Great for Clocks, Gates and Trigger signals.

Please note: You may see a very small drop in voltage as the LED's do requires a small amount of power. May not be suitable for very voltage sensitive patches.

Notes: Designed by Synth Cables using our specialist high quality shielded flexible TPE cable.

Perfect for groove boxes, synthesisers, mixers, audio speakers, computers, headphones and any device that accepts 3.5mm stereo connection.

Works with all Teenage Engineering devices (KO II, Pocket Operators, TX-6, OP-Z) Roland Aira compact series and any synth that takes a 3.5mm connection for audio, midi or sync.

Notes: Designed by Synth Cables using our specialist high quality shielded flexible TPE cable.

Perfect for groove boxes, synthesisers, mixers, audio speakers, computers, headphones and any device that accepts 3.5mm stereo connection.

Works with all Teenage Engineering devices (KO II, Pocket Operators, TX-6, OP-Z) Roland Aira compact series and any synth that takes a 3.5mm connection for audio, midi or sync.

Notes: Designed by Synth Cables using our specialist high quality shielded flexible TPE cable.

Perfect for groove boxes, synthesisers, mixers, audio speakers, computers, headphones and any device that accepts 3.5mm stereo connection.

Works with all Teenage Engineering devices (KO II, Pocket Operators, TX-6, OP-Z) Roland Aira compact series and any synth that takes a 3.5mm connection for audio, midi or sync.

Notes: Designed by Synth Cables using our specialist high quality shielded flexible TPE cable.

Perfect for groove boxes, synthesisers, mixers, audio speakers, computers, headphones and any device that accepts 3.5mm stereo connection.

Works with all Teenage Engineering devices (KO II, Pocket Operators, TX-6, OP-Z) Roland Aira compact series and any synth that takes a 3.5mm connection for audio, midi or sync.

Notes: Designed by Synth Cables using our specialist high quality shielded flexible TPE cable.

Perfect for groove boxes, synthesisers, mixers, audio speakers, computers, headphones and any device that accepts 3.5mm stereo connection.

Works with all Teenage Engineering devices (KO II, Pocket Operators, TX-6, OP-Z) Roland Aira compact series and any synth that takes a 3.5mm connection for audio, midi or sync.

Notes: Designed by Synth Cables using our specialist high quality shielded flexible TPE cable.

Perfect for groove boxes, synthesisers, mixers, audio speakers, computers, headphones and any device that accepts 3.5mm stereo connection.

Works with all Teenage Engineering devices (KO II, Pocket Operators, TX-6, OP-Z) Roland Aira compact series and any synth that takes a 3.5mm connection for audio, midi or sync.

Notes: Designed by Synth Cables using our specialist high quality shielded flexible TPE cable.

Perfect for groove boxes, synthesisers, mixers, audio speakers, computers, headphones and any device that accepts 3.5mm stereo connection.

Works with all Teenage Engineering devices (KO II, Pocket Operators, TX-6, OP-Z) Roland Aira compact series and any synth that takes a 3.5mm connection for audio, midi or sync.

Notes: Handytraxx Play

Portable vinyl performance, perfected.

The Handytraxx Play reimagines the classic portable turntable with modern innovation. Designed for DJs, vinyl enthusiasts, and creative performers, it combines portability with cutting-edge features, including unique Korg digital effects, a built-in audio looper, and a high-quality fader optimised for scratching. Developed in collaboration with Toshihide Nakama, co-creator of the original Handy Trax, this redefined turntable blends tradition and technology, delivering a truly unparalleled experience for music lovers on the go. Whether you're spinning at home or showcasing your skills anywhere, the Handytraxx Play is your perfect companion.

Key features

A portable player that lets you enjoy playing records and performing as a DJ, wherever you go
Unique Korg digital effects.
Audio looper for a wide range of musical expression and creativity
High-quality fader optimized for scratching
Custom-designed tonearm and motor control circuit
Developed in collaboration with Toshihide Nakama, former President of Vestax Inc.

The Handy Trax, originally created by Vestax, redefined portable turntables by giving users the freedom to play and scratch records anywhere. Beloved by DJs and vinyl enthusiasts alike, it helped spark the rise of "portablism".

Now, Korg proudly reinvents this iconic turntable with the Handytraxx Play. Developed in collaboration with Toshihide Nakama, former President of Vestax and co-creator of the Handy Trax, the Handytraxx Play retains the essence of the original while introducing exciting new features. These include cutting-edge digital effects, a built-in looper, and high-quality controls that make it possible to physically "play" with records on the go. Combined with unique customisation options, the Handytraxx Play delivers an unparalleled portable turntable experience. Perfect for casual vinyl lovers and hardcore portablists alike.

Honouring Toshihide Nakama

The Handytraxx Play is the result of a collaboration between Korg and Toshihide Nakama, the former President of Vestax and co-developer of the original Handy Trax. Developed closely with Nakama as an all-new kind of record player, the Handytraxx Play leverages Korg's unique digital processing and audio technologies while staying true to the spirit of the original Handy Trax. Tragically, Nakama passed away during the development of the Handytraxx Play on June 10th, 2023, but his vision and philosophy live on through this product, carrying his legacy to music lovers worldwide.

Optimised for scratching

The Handytraxx Play has been meticulously designed to provide an exceptional scratching experience. The high-quality fader, developed under Nakama's guidance, offers super smooth, precise motion and minimised silent zones for effortless cuts and transitions. Beginners and seasoned portablists alike will appreciate the responsive feel and the ability to reverse scratch by swapping crossfader channels. Every detail of the fader has been optimised to enhance performance while maintaining the portability that defines the Handytraxx Play.

Unique digital effects

Korg's expertise in digital audio processing brings powerful effects to the Handytraxx Play, elevating its creative potential.

Three types of filters

The Handytraxx Play offers three versatile filter types, each designed to provide dynamic control over your sound. The DJ filter seamlessly blends low-pass and high-pass filters, allowing smooth transitions. The EQ filter with a low isolator enhances bass frequencies for deep, impactful tones. Lastly, the peaking wah filter with modulation adds a unique, expressive touch, letting you shape bold experimental sounds or subtle nuanced effects in real time.
Delay
In addition to filters, the Handytraxx Play features a built-in delay effect that expands your creative possibilities. From creating spacious, ambient soundscapes to bold, metallic echoes, the delay effect can be controlled intuitively using the vertical fader for precise level adjustments.

This seamless integration of effects makes the Handytraxx Play an essential tool to enhance any DJ performance.

Built-in audio looper and versatile playback control

The Handytraxx Play includes a built-in looper that redefines creativity for DJs and vinyl enthusiasts. With its variable speed control switch, the looper lets you capture and replay live playback of a record's sound-a feature known as live looping. This capability allows you to craft unique DJ mixes by adding scratches to a looped beat, recording your favourite sounds to use as a sampler, or even swapping records while the loop continues to play seamlessly. The looper's versatility makes it an essential tool for both experimentation and live performance.

The variable speed control switch provides intuitive options for adjusting playback speed, a fundamental requirement for DJs. You can effortlessly switch between 33 and 45 RPM or fine-tune the variable speed ratio to match your creative needs. This adaptability extends to layering recordings over existing loops- for instance, playing back a beat loop at your chosen speed and overlaying scratching sounds on top. The Handytraxx Play's looper opens new possibilities for musical expression, offering endless opportunities to innovate and perform.

Precision craftsmanship

Every component of the Handytraxx Play has been crafted for superior performance. The custom-designed tonearm offers high-level tracing performance, minimising needle skipping during playback and scratching. A belt-driven motor with digital rotation correction ensures stable platter rotation and quick recovery for incidental effects that sound natural. Refinements to the turntable mechanism further reduce skipping, allowing for consistent, reliable performance during even the most demanding scratch play.

Groove on the go

Designed for ultimate portability, the Handytraxx Play can be powered by the included AC adapter or six AA batteries, giving you the flexibility to take your music anywhere. The built-in 2.5W speaker delivers impressive sound with rich bass and clear playback, whether you're connected to external speakers or not.

Flexible customisation

A redesigned headshell supports both ceramic and MM cartridges*, offering flexibility for various playback styles. Users can replace the scratch fader or reorient the control panel for right- or left-handed use, ensuring comfort and adaptability for every DJ. These thoughtful customisation options make the Handytraxx Play a truly personal and versatile tool, perfect for creating and performing.

* Basic soldering skills are required for replacing ceramic and MM cartridges.

Specifications

Drive system: Belt-driven (with digital rotation correction)
Drive motor: DC servo motor
RPM: 33-1/3, 45 or 78 revolutions per minute
S/N (signal-to-noise) ratio: Less than 60 dB (DIN-B)
Cartridge model: Stereo ceramic cartridge included (MM supported)
Maximum input level: AUX IN: 2.5 Vp
Maximum output level: LINE OUT ? 2.3 Vp, THD 1%, PHONO OUT: 300 mV (1 kHz, 5cm/sec)
PHONO preamp gain: Standard value: 34.5 dB; equalizer characteristics: RIAA
Digital signal processing
A/D, D/A: 44.1 kHz@16-bit, stereo
Crossfader: 44.1 kHz, 32-bit float, stereo
Mix: 44.1 kHz, 32-bit float, stereo
Looper: 44.1 kHz, 16-bit, stereo; max. recording time: approx. 20 sec
Filter: 44.1 kHz, 32-bit float, stereo; type: OFF, FILTER1, FILTER2, FILTER3
Delay: 44.1 kHz, 32-bit float, stereo; feedback (0%-80%), time (1,000 ms-10 ms)

Power consumption: 2.35 W
Power supply: AC adapter (included), six AA batteries (alkaline or nickel-metal hydride) Weight: 2.3 kg/5.07 lb
Dimensions: 370 x 280 x 84 mm/14.57? x 11.02? x 3.30?; with cover on: 370 x 286 x 87 mm/14.57" x 11.26" x 3.43"
Included items AC adapter, AC adapter replacement plug (5 types), dust cover, slip mat, EP adapter, Quick Start Guide

Notes: A contemporary reboot of the 1970s miniKORG 700, the 700Sm introduces a second oscillator, MIDI, arpeggiator and spring reverb. All the features of 2021's limited-edition 700FS reboot in a more compact, portable package.

Supplier's Notes:
The miniKORG 700Sm is a compact tribute to the iconic miniKORG 700, the very origin of Korg's analogue synth history, enhanced to meet the needs of today's musicians. Featuring two oscillators for thick, detuned sounds, the miniKORG 700Sm sees the return of the signature Traveler controller, allowing for expressive filter adjustments. With advancements like aftertouch, spring reverb, an arpeggiator, and a range of connectivity options including USB and MIDI, this synth is both a powerful standalone instrument and an excellent companion to stage keyboards. Complete with a custom soft case and a free software bundle, the miniKORG 700Sm brings vintage analogue sound into the present day.

Released in 2021, the miniKORG 700FS was a spectacular recreation of the legendary 1970s miniKORG 700S analogue synthesizer, enhanced with additional functionality that wasn't possible in the original. The miniKORG 700FS was so popular that its limited production run sold out quickly, with significant demand for increased production. Korg has a long history of groundbreaking analogue synthesizers. The miniKORG 700Sm is a tribute to the miniKORG 700, the very origin of Korg's analogue synth history, while being enhanced to meet the needs of today's musicians.

Downsizing the miniKORG 700FS

The miniKORG 700Sm retains all the features of the miniKORG 700FS in an instrument approximately 86% the size of the original. Additionally, the miniKORG 700Sm weighs just 5.8 kg (12.8 lbs), making it easy to transport.

The elements vital to an analogue synth

The character and richness of the sounds produced by the miniKORG 700 could not be realized through analogue modelling. Although it's possible to replicate a circuit by using the same parts and copying the design schematics or circuit board, there's no guarantee that this will reproduce the original sound. This is because the components age over time, dramatically altering the sound. To accurately recreate the original sound, Korg had to rely on the experience and skill of the technicians who worked on the original product.

Korg were able to bring the original sound to life thanks to their team of technicians, who have gained invaluable expertise over the years through their work on numerous synthesizer revival projects. This team was guided by the legendary Fumio Mieda, a Korg engineer since the early 1970s and one of the designers of the original miniKORG 700S. Working closely with Korg's sound designers, they meticulously reproduced the original sound as faithfully as possible. Those who play the miniKORG 700Sm will experience it as a beautifully crafted and authentic recreation of the original.

Beautiful synth leads, thick bass - and more

The miniKORG 700 was Korg's first synthesizer, and produced some of the most recognizable, rich and fattest analogue sounds of the time. The new miniKORG 700Sm features oscillators with an unmistakeable tone and an authentic recreation of the Traveler controller- a signature element of the miniKORG 700- designed to add extraordinary colour and expression to performances. Its sound fits seamlessly in today's music, especially with its standout lead and bass synth tones.

Secondary keyboard possibilities

The miniKORG 700 was originally designed as a secondary keyboard, often placed on top of an organ to expand their sound palette. The miniKORG 700Sm, with its compact and portable form factor, stands out as a powerful solo instrument but also complements stage keyboards like electric pianos and organs perfectly.

The controls on the miniKORG 700 were laid out below its keys in a row, allowing players to easily access them when it was placed on top of another instrument. This intuitive layout remains unchanged, offering simplicity, ease of use, and a unique look that sets it apart from any other instrument.

Expanded functionality When the miniKORG 700 was originally released, electronic components were larger in size, limiting functionality due to the small space inside. Thanks to advancements in technology, there is now room to include a spring reverb as well as a joystick for pitch bend and modulation. The new version also features aftertouch for added expressiveness, as well as an arpeggiator, USB port, MIDI IN connector and a CV/GATE IN jack. Korg have also added memory programs to store settings, something that wasn't available in the early 1970s.

Traveler controller

A unique feature of the miniKORG 700, the Traveler controller, consisted of two parallel sliders located below the keyboard. With these controls, players could adjust the cutoff frequency, with the upper lever controlling the low-pass filter and the lower lever controlling the high-pass filter. This gave players the freedom to adjust the expressive character of the sound according to the position of the levers. By moving the levers to the left and right while playing the keys, wah-wah and muted sounds could be created along with the iconic "traveling" sound.

Since the sound passing through the filter has a lower cutoff frequency and higher cutoff frequency than the frequencies set by the sliders, all frequencies are filtered and thus no sound is heard when the positions of the two sliders are inverted. In other words, making the two sliders cross would in theory produce no sound. To address this, the original miniKORG 700 featured protrusions on the sliders to physically prevent them from crossing.

The design was both a benefit and limitation of analogue circuitry. In the past- and even today- it's impossible to design a filter with perfect characteristics. During the time that the miniKORG 700 was sold, some players would shave off the protrusions on the sliders to allow them to cross, in an attempt to create new sounds. In fact, some models sold internationally did not even have the protrusions to begin with. The miniKORG 700Sm also does not have the protrusions, opening endless sound design possibilities and allowing players to create patches in unique ways.

A second oscillator The miniKORG 700 was a single-oscillator mono synth. One year later 1974, the miniKORG 700S was released with more space added to the left of the keyboard for a controller. This version also introduced a second oscillator, a ring modulator, and other enhancements. The new Sm model is a revival of the 700S, with its expanded functionality, including two oscillators that deliver powerful detuning and thick, penetrating sounds, particularly for bass and lead sounds.

Includes a made-to-fit soft case

The miniKORG 700Sm comes with a custom-made soft case designed to perfectly fit the instrument, ensuring both protection and portability. This case makes it easy to take your miniKORG 700Sm wherever you go, whether you're performing, recording, or traveling, keeping your synth safe and secure.

Free music software bundle

The miniKORG 700Sm comes with a diverse variety of music software including Izotope (featuring "Ozone Elements" which lets you not only create songs but also master them using AI), "Skoove" which will help you improve your keyboard playing skills, "miniKORG 700S" from the Korg Collection software, as well as a wide range of software synths from Korg and other developers.

Specifications

Keyboard: 37 keys (Slim-key, with aftertouch, no velocity sensitivity)
Range: 7 octaves
Waveform: Triangle wave, Square wave, Sawtooth wave, Chorus I, Chorus II
Programs: 14
Input: USB connector (Type B), MIDI IN connector, SYNC IN and SYNC OUT jack (3.5mm monaural mini phone jack), CV IN and GATE IN jack (3.5mm monaural mini phone jack), AUDIO IN jack (6.3mm monaural phone jack, TS unbalanced)
Output: OUTPUT L/MONO and R jack (6.3mm stereo phone jack, TS unbalanced), Headphones jack (6.3mm stereo phone jack)
Power supply: AC adapter (DC 12V)
Power consumption: 9W
Dimensions (W × D × H): 641 x 228 x 107 mm/25.24" x 8.98" x 4.21"
Weight: 5.8 kg/12.79 lbs.
Included items: AC adapter, Traveler knob (without protrusions type) x 2, Soft case Accessories (sold separately)
SQ-CABLE-6 (Patch Cable)

Notes: ***B-STOCK: Box opened, product in perfect working order***


'Beast's Chalkboard' is dual channel stepped voltage source and adder for your eurorack modular synthesizer system. It primarily is intended as a dual octave switcher for VCO's but has many other uses including sequence transposition, FM ratio creation, buffered CV distribution and VCO calibration.

Technical Specifications:

Supply: +/-12V (Reverse voltage & polyfuse protection)
Current Draw: ~30ma
Size: 6 HP
Depth: 22mm (including power header)
Offset Error: +/- 10mV

Notes: Upgraded version of WMD's excellent performance mixer module, the PM MKII features four stereo or dual mono channels, CV control of levels, panning and aux sends, plus soft mutes per channel.

Supplier's Notes:
Need More Inputs?

Add four channels at a time to your Performance Mixer MKII setup, or you can use the Channels MKII as a standalone four channel mixer.

The expansion is simple -- identical channels, just more of them. Four at a time, up to four Channels units, for 24 total stereo channels.

A simple 16 pin 2mm pitch expansion cable is provided and is the only connection necessary. Units can be daisy-chained easily resulting in a clean setup.

Additionally, the outputs on Channels MKII still work when connected to the PM MKII. So you get a submix of AUX1, AUX2, and MIX available for whatever you may want to do, drum submixing, FX routing, etc.

Not Just an Expansion -- Standalone Operation
As a standalone unit, you get three stereo outputs, MIX, AUX1, AUX2. The buttons are soft mutes. It's a robust four channel setup.

FYI -- You can not connect CHANNELS MKIIs together without a PM MKII. The summing, buttons, and control brain is in the master section of the PM MKII.

Recording Outputs:

Pre and Post fade headers are available on the rear for connection to the DB25 MKII. Each Chanels MKII will fill 1/2 of a DB25 with the Pre or Post connections.

Specifications:

24HP
36mm Depth behind Panel Including Cables
Board Height Between Rails 111.5mm
Channel Input Gain: -12dB to +20dB
Fader Gain: -100dB to +5dB (Applies to Aux1, Aux2 also)
Pan Curve: -100dB at Hard L/R, -3dB at Center
All Inputs and Outputs (Including Sends, Inserts, Headers, etc) are IN PHASE
HPF: -1.3dB at 20Hz

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Still a classic, still a brilliant mixer. Nearly 20 years on the market but sounding just as good as ever, the Xone:92 seems like a bit of a bargain now.

Supplier's Notes:
The industry-standard Xone:92 is a versatile six channel analogue mixer, renowned for its expansive, involving sound. With its solid construction and easy to use interface, the 92 is on the riders of most of the world's top DJs and is a permanent fixture in the booth at many of the biggest superclubs.

The Xone:92 was one of the first professional DJ mixers to incorporate MIDI for control of DJ software or external devices, and the first to include the innovative dual VCF filters. With its two stereo FX sends, twin Mic/returns, and one of the best EQ sections around, this mixer is a DJ's dream tool.

For those who prefer to blend with rotary faders the Xone:92R is also available.

Notes: MicroLab mk3 is designed for today's modern creatives. Its ultra-compact form factor, high-quality keybed, and intuitive controls make it the perfect MIDI controller for producers working in small studios, on the go, or just starting their music production journey.

With a durable, lightweight design and plug-and-play USB connectivity, MicroLab mk3 fits seamlessly into any workflow - empowering you to start making music instantly. Enjoy complete integration with leading software including Analog Lab Intro and Ableton Live Lite, and extend your creativity with features like chord mode and dual touch strips for expressive performance.

Small, lightweight, durable, and USB-powered - ideal for mobile music-making and compact studio setups.

With a high-quality slim keybed, MicroLab mk3 delivers a responsive and true playing experience that your music deserves.

MicroLab mk3 delivers big sound with 500 curated presets from Analog Lab Intro, intuitive control via four buttons and two touch strips, and instant music production with Ableton Live Lite.

Its plug-and-play USB connectivity and intuitive features ensures you can start creating music right away - no hassle, no setup.

Main Features

High quality keybed

25-note velocity-sensitive slim keyboard, responsive and expressive.

Controls

2 touch strips for pitch bend and modulation, 4 control buttons for octave shift and navigation

Smart features

Chord Mode - Play full chords with a single key
Hold function
Octave up and down buttons
Semitone transpose

Software integration

Seamless compatibility with all major DAWs and soft synths.
Analog Lab & V Collection browsing - Explore 500 curated sounds instantly.

Included Software titles & services

Analog Lab Intro - 500 sounds from iconic synths and keyboards.
Ableton Live Lite - Essential tools for recording and producing music.

Connectivity

USB-C powered for instant plug-and-play operation.
MIDI class-compliant - Multiclient MIDI driver for Windows.
Compatible with iPads & Android devices (via adapter).
Sustain pedal input - Connect a sustain or expression pedal for enhanced performance.

Size & weight

Size (mm): 406 x 39 x 125 mm
Size (in): 15.98 x 1.54 x 4.92 in
Weight (kg): 0.62 kg
Weight (lb): 1.37 lb

Notes: The DJ Control Inpulse 500 Silver Edition is more than just a DJ controller - it's a complete package designed to ignite your passion for DJing

This special edition boasts sleek silver-coloured finishes, combining aesthetics with cutting-edge technology to enhance your performance. Whether you are a beginner looking to master the basics or an experienced DJ seeking advanced features for a mobile setup, the Inpulse 500 Silver Edition delivers everything you need to make your mark.

It includes a transport bag, ensuring your gear stays protected anywhere effortlessly, Serato DJ Lite + compatibility with Serato DJ Pro (upgrade licence required), and and a license key to the all-new DJUCED Pro software with performance-ready features for any kind of DJ, such as VJing, Day mode, advanced FX and so much more.

A unique DJ controller for live performances

Stand out with the elegant silver finish that adds a touch of sophistication to your setup. The sleek and modern aesthetic not only looks great but also complements any professional or home studio environment.

DJUCED Pro

Gain access to DJUCED Pro software, providing you with powerful tools to mix and create your unique soundscapes. This comprehensive software offers an intuitive interface, advanced features, and seamless integration with your DJControl Inpulse 500 Silver Edition controller.

Advanced software features

With Unlock mode, you can get ready for your performance without having to connect your DJ controller. You can analyze, add hot cues, add saved loops and test your transitions with just your laptop. With Remapping, you can assign different functions or commands to the knobs, buttons, pads and faders on your DJ controller to tailor your gear to your specific preferences or workflow.

Interactive performances made easy

With the new VJing feature in DJUCED Pro, you can incorporate visual elements from a built-in library of video loops that sync to your music and enhance your performance.

Ready for wherever your DJ career takes you

Protect your gear on the go with the included high-quality transport bag, designed specifically for the DJControl Inpulse 500. This durable bag features padded compartments and reinforced stitching to ensure your equipment stays safe during travel.

Professional-grade audio connectivity

The controller features a range of inputs and outputs, including 2x RCA and 2xTS master outputs, a microphone input, an AUX input, and a headphone output for seamless integration with your setup. This ensures you can connect to any sound system or external equipment with ease.

Beatmatch Guide

Master the art of DJing with the helpful light guides that assist with beatmatching, syncing, and understanding the layout. These visual aids are perfect for beginners and provide an extra layer of support for experienced DJs looking to refine their skills.

Intelligent Music Assistant (IMA)

Get song recommendations based on your library to keep the energy up and the crowd dancing. The IMA helps you maintain a seamless flow of music, ensuring you always have the perfect track ready to go.

Specifcations

Audio
44.1 kHz / 24-bit AUX input 3.5 mm Headphone output 3.5 mm + 6.3mm Microphone input 6.3mm Master outputs: 2 x RCA + 2 x TRS

Mixer controls
1 Filter, 3 EQ, 1 Gain and 1 volume fader per deck Crossfader, volume master, headphone volume, master and deck VU meters Headphone cue to mix, microphone volume, microphone 2-band EQ AUX volume, AUX Filter Filter/FX rack with 4 FX select buttons and 2 rotary knobs

Deck controls
Touch-sensitive jog wheel Tempo fader 8 pads x 8 modes (Hot-Cue, Loop, Stems, Sampler) Vinyl/Slip/Quantize Loop In/Loop Out buttons Autoloop knobs

Minimum system requirements

Intel Core i7
Windows 10 & 11
AMD Ryzen 5 3000 series or higher (Serato)
Apple M1 or better
macOS 12 or later
8 GB RAM or more

What's in the box

DJControl Inpulse 500 Silver Edition controller
Controller unlocks DJUCED and Serato DJ Lite licenses
DJUCED Pro license card

Notes: LED CV 3.5mm mono patch cables

Visualise your patches like never before

Super slim aluminium barrel
Durable construction - Ultra flexible TPE cable
3.5mm mono jack connector

Compatibility

Works with CV patch signal, designed by us for modular and semi modular synthesisers
Great for Clocks, Gates and Trigger signals.

Please note: You may see a very small drop in voltage as the LED's do requires a small amount of power. May not be suitable for very voltage sensitive patches.

Notes: ***B-STOCK: Box opened, product in perfect working order***


The new CARRY LITE DJ-CASE XXL PLUS is a very lightweight and compact carrying solution for your DJ-equipment and comes in a nice full-black matt finishing. Constructed from laminated MDF panels and anodized aluminum profiles the CARRY LITE design features a fully padded interior with a variable pick & pluck foam that allows to create individual adapted compartments for various-sized DJ-controllers such as Pioneer DDJ-SX2, DDJ-SX3, Denon MCX-8000, Denon MC-7000, Roland DJ-808 or similar-sized DJ-controllers. The pick & pluck foam consists of two separate layers providing the additional option to create another slot underneath the controller for laptop or cable storage.

Fits:

Denon DJ MC-7000
Denon DJ MCX-8000
Denon DJ SC Live 2
Denon DJ SC Live 4
Native Instruments Kontrol S8
Numark NS6
Numark 4Track
Numark Mixdeck Quad
Numark IDJPro
Pioneer DJ DDJ-FLX6
Pioneer DJ DDJ-FLX10
Pioneer DJ DDJ-SX
Pioneer DJ DDJ-SX2
Pioneer DJ DDJ-SX3
Pioneer DJ DDJ-RX
Pioneer DJ DDJ-RX2
Pioneer DJ DDJ-1000
Pioneer DJ XDJ-R1
Pioneer DJ XDJ-Aero
Pioneer DJ DDJ-S1/T1
Rane One
Reloop Mixon4
Roland DJ-808

Basics:

Constructed from laminated MDF and anodized aluminum profiles and butterfly latches (can be secured with a padlock)
Fully lined interior of 5 mm EVA foam and a 3 cm thick egg-crate foam on lid
Including 2-layer (2,5 and 3,5 cm) pick & pluck foam to create individual compartment and slots for dj-controllers, battle-mixers, laptops or smaller accessories.
Including detachable lid
Convenient carrying-handle and option to attach a separate shoulder-strap.

Specifications:

Outer measures: 50 x 80 x 16cm
Inner measures: 46,5 x 77 x 11cm
Weight: 6,3 kg

Notes: An original creative take on delays, looping, reverb and modulation, the Technician combines various digital programs to create a hugely versatile all-round audio tweaking toolbox.

Supplier's Notes:
Delay modes

Digital

Starting as a crisp digital delay, this mode, when paired with the tap footswitch, covers a lot of ground for your delay needs. The "Red" modulator lets you adjust the dampening of the delay, making the repeats either brighter (emulating towards a tape or HIFI sound) or darker

Reverse

Instead of reading the delay buffer in a forward direction like the "Digital" delay we read the buffer backwards creating unique sound possibilities. You can further modify this sound with the "Red" modulator to adjust the dampening of the repeats to grow brighter or darker.

Granular

Takes the delay buffer and chops it up into "Grains" and then plays those grains back. The size of the grains, direction (forward/reverse), the speed (pitch) and location in the buffer is all randomized so every time you experience this mode it will be a unique exploration into granular synthesis. The "Red" modulator allows you to adjust the max size of the randomized "size" of the grains and the amount of grains from 1-5.

Re-sample

What if you want a more complex soundscape like other instruments are playing with you? Re-sample accomplishes this by playing the delay buffer at different speeds which changes the pitch and timing of the delayed phrases creating a more complex musical expression of what you are playing. "Red" lets you adjust the mix of the octave down and the octave up.

Reverb modes

Hall

The least diffused of the reverb modes "Hall" allows you hear the reflective nature of the hallway your sound is in.

Plate

Emulating a classic plate reverb sound that is diffuse and reflective.

Chasm

An exploration into reverb design feedback networks that can allow for unnaturally large decay lengths.

Grim

Takes the "Chasm" mode and splits the output to a parallel octave down so you get the normal output + the octave down for a deep rich soundscape.

Looper modes

Gives you latching control over the rec/dub of your looper.

Momentary

Only rec/dub while holding the rec/dub switch.

Quantise

Works like the latching but will trim your loop to a division of the existing delay time.

MOD ONE and MOD TWO allow you adjust the following modulators

Modulators

Delay

Vibrato - an asymmetrical modulation of the reverbs pre-delay to create sonically pleasing movement in your reverb.
Auto-Filter - takes control of the "Filter" DSP block and modulates it with an LFO. Adjust the "Resonance" of the "Filter" block to get a more dramatic effect.
Shimmer - Adds an octave feedback path in each reverb mode and can be octave down or octave up.
Dampening - adjust the LPF and HPF of the reverb feedback path drastically changing the tone and how the reverb reacts to input.

Reverb

Vibrato - an asymmetrical modulation of the reverbs pre-delay to create sonically pleasing movement in your reverb.
Auto-Filter - takes control of the "Filter" DSP block and modulates it with an LFO. Adjust the "Resonance" of the "Filter" block to get a more dramatic effect.
Shimmer - Adds an octave feedback path in each reverb mode and can be octave down or octave up.
Dampening - adjust the LPF and HPF of the reverb feedback path drastically changing the tone and how the reverb reacts to input.

Looper

Clock: fine detail adjustment of the speed and direction of the clock.
Quantized Clock: Quantized adjustment of the speed and direction of the clock locked to octave intervals.
Loop Start: Adjust the starting point of the loop.
Loop End: Adjust where the loop will end.

MIDI: 3.5MM IN/OUT
USB: USB-C
Expression: TRS input

Controls

MIX (mod one)- The mix of the Reverb DSP block
DECAY (mod two)- The time it takes for your instruments reverberations to fade away, or die.
FEEDBACK (mod two)- How many repeats the delay will have
MIX (mod one)- The mix of the Delay DSP block
CLOCK (pre-delay)- Adjusts the "size" of the reverb DSP block
MIX (mod one)- The mix of the Looper DSP block
FREQUENCY (resonance)- Adjusts the Frequency of the Filter DSP block
TIME (dry mix)- Set the time of the Delay DSP block up to 2 sec

Modifiers

Reverb Mode (modulators)- Sets what Reverb Algorithm is active
Looper Mode (modulators)- Sets how you control the Looper DSP block
Tap Division (effect order)- Sets which tap division is active for the Delay DSP block. 1/2: Half note, 1/4: Quarter note, .1/8th: Dotted eighth note, 1/8th: Eighth note
Delay Mode (modulators)- Sets which Delay Algorithm is active

Input/Output: Stereo / mono - stereo / stereo - mono / parallel mono
Bypass: True Bypass / Tails
Power: 9v 400MA
Dimensions: 4.8 x 5.5
MIDI: Yes. 3.5mm Jack
USB: Yes
Jacks: Top Mounted Input And Output Jacks

Notes: ***B-STOCK: Box damaged, but product is in excellent condition and in perfect working order***


Lavalier GO is a professional-grade wearable microphone designed for use in a wide range of applications. The 3.5mm TRS connector is designed to pair perfectly with the RODE Wireless GO and most recording devices with a 3.5mm TRS microphone input.

Lavalier GO is designed to perform excellently in any broadcast application. Featuring a discreet 4.5mm omnidirectional microphone, it delivers crystal clear audio in all environments and is incredibly forgiving when it comes to placement on talent, allowing for greater flexibility in fast-paced situations.

A foam pop shield is supplied to minimise wind noise and vocal plosives (hard 'b', 't' and 'p' sounds), as well as a durable mounting clip with in-built cable management for quick and easy rigging. It also features a hard-wearing Kevlarr reinforced cable, designed to withstand the rigours of any shoot.

Notes: Excellent value all-rounders from Rode, the NTH-50s offer precise, detailed sound to match their slick, stylish looks. Custom 40mm drivers and ergonomic design provide a nice combination of sound and comfort.

Supplier's Notes:
The NTH-50 professional on-ear headphones combine exceptional sonic performance, superior comfort, and a sleek and durable design that make them the perfect companion for DJs, music producers, content creators and audiophiles. The custom driver array features a revolutionary acoustic design with an innovative resonant chamber, and is precision-tuned for incredibly accurate and detailed audio reproduction with ultra-low distortion. Not only does this result in a more natural sound signature than other on-ear headphones, but it also offers superior external noise isolation. To minimise wearing fatigue and ensure optimal comfort, they feature a contoured headband and an ergonomic earcup structure to reduce pressure on your head and ears during longer sessions. With a lightweight, compact design combined with premium materials and a rugged build, the NTH-50 headphones are with you for the long-haul, ready for the rigours of the road and the studio alike, day in, day out.

Acoustic & electrical specifications

Transducer Size: 40mm
Transducer Type: Dynamic
Operating Principle: Closed
Ear Coupling: Supra-Aural/On-Ear
Frequency Response: 5Hz - 35Khz
Impedance: 32 O
Sensitivity @1mW / 500Hz: 102 dB SPL Sensitivity @1V (RMS) / 500Hz: 117 dB SPL
Total Harmonic Distortion @1mW: < 0.2 % @100Hz < 0.03% @500Hz
Total Harmonic Distortion @100Hz: 0.05% @100dB SPL 0.5% @120dB SPL
Short Term Max Input Power: 100 mW
Long Term Max Input Power: 50 mW
Max SPL: 124 dB SPL
Ambient Noise Attenuation: 21 dBA
Connection Type: Dual TRRS Cable Attachments

Mechanical specifications

Weight (grams): 220
Cable Length: 1.7m coiled cable
Included Accessories:
1 x Headphone Cable
1 x 3.5mm to 1/4-inch Adaptor
1 x Storage Pouch
1 x COLORS ID Set

What's in the box

1 x NTH-50 Headphones
1 x Storage Pouch
1 x Headphone Cable
1 x COLORS ID Set
1 x 3.5mm to 1/4-inch Adaptor

Notes: ***B-STOCK: Sleeve damaged but otherwise in excellent condition***


Lefto is described by Fact! Mag as "your favourite DJ's favourite DJ", voted "Best DJ" at the Red Bull Elektropedia Awards Top 100 Category; and is one of Europe's most important tastemakers. "My Friends Make Music Too" is Lefto's picks for DJ's who don't play the obvious bangers:

Tracklisting:

CID RIM - Convoi
HENRY WU - Uzbekki Driver (Uber tales)
ALLOY - Rumpin
MONO/POLY - Syrius B
LEFTO - Blaze
LTGL - Frost

And of course 2 sides of Serato Control Tone.

Pressed using a unique process involving picture and colour vinyl - the record is as unique as the music.

Cover by Oli-B.

Notes: LED CV 3.5mm mono patch cables

Visualise your patches like never before

Super slim aluminium barrel
Durable construction - Ultra flexible TPE cable
3.5mm mono jack connector

Compatibility

Works with CV patch signal, designed by us for modular and semi modular synthesisers
Great for Clocks, Gates and Trigger signals.

Please note: You may see a very small drop in voltage as the LED's do requires a small amount of power. May not be suitable for very voltage sensitive patches.

Notes: Designed by Synth Cables using our specialist high quality shielded flexible TPE cable.

Perfect for groove boxes, synthesisers, mixers, audio speakers, computers, headphones and any device that accepts 3.5mm stereo connection.

Works with all Teenage Engineering devices (KO II, Pocket Operators, TX-6, OP-Z) Roland Aira compact series and any synth that takes a 3.5mm connection for audio, midi or sync.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Two channel mixer ideal for mobile DJ setups and home use.

Power supply: 100-240 V AC, 50/60 Hz
Power consumption: Max. 8 W
Protection class: Protection class II
Power connection: Mains input via C8 (M) "figure 8" mounting version power supply cord with Euro plug (provided)
Frequency range: 20 - 20000 Hz
S/N ratio: >80 dB
THD: <0,1 % at 1 kHz
DJ filter: Per channel: LPF/HPF bipolar,
DJ-FX: Master: CHORUS, REVERB, DELAY, FLANGER
Master: WHA, PHASE,
Control: Bluetooth
Bluetooth device name: PM-202FX
Range: Bluetooth: range up to 15m
Crosstalk: >60 dB
Control elements: Crossfader, Crossfade curve control, crossfade reverse switch, FX Parameter control, power switch
Status LED: Power, master level meter
Connections: Input: line/phono via 2 x stereo RCA
Input: line via 2 x stereo RCA, microphone via 1 x 3-pin XLR (F) mounting version, antenna via 1 x SMA (F) mounting version, Earthing connection via 2 x screw terminal
Output: master via 2 x 3-pin XLR (M) mounting version, master via 1 x stereo RCA, rec. via 1 x stereo RCA, headphones via 1 x 6.3 mm jack socket (stereo) mounting version, headphones via 1 x 3.5 mm jack (stereo) mounting version
Channels: Input channel: 2 x stereo with Line-Line/Phono-Bluetooth switch via RCA, channel control via 60mm fader, 2-band tone control EQ, gain control, CUE switch
Microphone channel: 1 x mono via XLR, channel control via rotary dial, 2-band tone control EQ
Master output: 1 x stereo via XLR or RCA, channel control via rotary dial, balance control
Headphones output: stereo via jack, channel control via rotary dial, cue mix function
Rec. output: stereo via RCA
Material: Metal

Colour: Black
Housing design: Desktop console housing
Dimensions: Length: 30,5 cm
Width: 19,0 cm
Height: 11,0 cm
Weight: 2,18 kg

Power cord

Cable length: 2,10 m detachable

Notes: ***B-STOCK: Box opened, product in perfect working order***


An evolution of the monophonic Typhon synth concept, the Artemis applies similar interface design to a six-voice analogue synth module with Sinevibes digital effects. Lots of power and typically classy Dreadbox sound.

Supplier's Notes:
Artemis is a unique analogue polysynth with a UI inspired by Dreadbox's award-winning Typhon synthesizer. It builds on Typhon's innovative concepts, adding six voices of polyphony, powerful modulation capabilities, stereo FX, voice spreading, and much more!

From classic polysynth tones to aggressive modern sounds and everything in between, Artemis has a wealth of raw synthesis and modulation capabilities to explore.

At its core, Artemis features a fully analogue architecture, based on the smart oscillator implementation found in both the Typhon and the Murmux Adept, allowing effortless transitions between multiple waveforms, mix settings, glide, FM, and more.

These VCOs are paired with Dreadbox's signature filter topology, offering classic 12dB or 24dB per octave low-pass modes, as well as a standalone resonant high-pass filter. The low-pass filter includes dedicated filter frequency FM control for dialling in edgier, modern tones.

Two multi-mode LFOs enhance the modulation possibilities: LFO 1 offers a unique fade-in parameter, while LFO 2 includes XMOD (cross-modulation) control for chaotic, brash textures. Each LFO has multiple waveforms and can modulate pitch, filter cutoff, VCO waveform, pulse width, and more.

This analogue powerhouse is complemented by a suite of world-class FX from Sinevibes, who previously collaborated with Dreadbox on Typhon's FX. With reverb, delay, modulation effects, master distortion, and more, Artemis delivers an extra dimension to your sounds.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Tabletop LED light effect with 6 x 1W LEDs producing coloured beams which are diverted through a rippled dome to create a dynamic ceiling display with a sound sensitive auto sequence. The fixture can also be wall or ceiling mounted to shine onto a wall or floor for home discos and parties.

Notes: The Faux Spring Reverb has been a staple on many players boards for many years now, and when it was discontinued a few years ago Brian Wampler received numerous requests to bring it back since then. Not being one to be content with just reissuing something, Brian decided to take all of the feedback from players he had received and give it a bit if an upgrade.

The result was the birth of the Mini Faux Spring Reverb. Following the idea of - If it's not broke, don't fix it - he just added more of what players love. More decay, more drippiness and more of that bouncy spring tone players love in the bigger Reverb tanks. Despite sounding bigger and fuller, he decided to condense it down into a mini enclosure to fit perfectly at the end if any chain to grab and go.

When the moment calls for the sound of spring reverb, you'll be glad you have this little guy. With an extended decay time, the Mini Faux Spring Reverb pedal serves up authentic tones that drip with boing (Don't you love spring reverb adjectives?) just like a great spring tank. And thanks to an easy-to-navigate control layout, you'll have your perfect tone pulled up in no time.

For years, the Wampler Faux Spring Reverb was the very best spring reverb pedal available, Brian Wampler updated it, made it smaller, made it bouncier - made it even more perfect for your rig!

There no denying the popularity and convenience of this pedal's mini design. Not only does it fit wonderfully on even the most cramped pedalboards, but it's easy to throw in the back of your open-back combo when running in the amp's effects loop.

Brian Wampler's attention to detail and commitment to bringing you the best-sounding & most usable Effects Boxes on the market is nothing new. Those qualities are on full display within the Mini Faux Spring Reverb. We're all tone-freaks, and we're always trying new things, but we hope this pedal finds it's forever home on your pedalboard, so we built it to last that long.

Technical Details

Built in the U.S.A.
High-grade components picked for their superior sound and response
True bypass Small profile, ideal for pedal board placement
Signal is split, core tone is unchanged through the pedal, the effect is laid on top of your tone
Volume, Depth, and Tone control allowing you full control of your reverb trail
9v power jack (no battery connector inside)
3PDT True Bypass
Includes Wampler's limited 5-year warranty
Power draw: 64.3mA (at 9v) and 69.5mA (at 12v)
1.50" x 3.50" x 1.5" (38.1mm x 88.9mm x 38.1mm) - height excludes knobs and switches

Notes: When Wampler decides to jump into the multiFX market, they do it in style. 11 custom designed effects blocks, from Flanger to Phaser, Chorus to U-Vibe, Harmonic Tremolo to Envelope Filter, you know everything about it is going to be perfect.

In one incredibly small package, you can control any of the 8 presets via midi, you can assign an expression pedal to control ANY of the main five controls, you can run it in full glorious stereo or keep it in mono - you can even split that mono signal to route some effects to go before your drive pedals, or amp gain, and have the rest follow behind or in your effects loop!

When you put the Terraform into your rig, you know that not only will you get that legendary Wampler tone, but you will get the most easy to use, hugely versatile and best sounding collection of modulations you could ever want.

Each of the 11 effect blocks have been designed and realized in-house by the tone chasing freaks at Wampler. Each one has been inspired by many individual stomps, both modern and vintage, to bring you the best version of them all.

There are 8 presets to store your favorite sounds - you can recall them via the fully mappable midi, via the button on the front and even from the stomps! The expression pedal can control ANY of the 5 controls and you can even set the heel and toe point!

If you want true Stereo, you got it - You want basic mono, you got it.. You can even split that mono signal so you can put some effects in front of your drive section and the others behind, or going into the front of your amp with the rest in the effects loop. However you like to route your signal, the Terraform has you covered.

Brian Wampler's attention to detail and commitment to bringing you the best-sounding & most usable Effects Boxes on the market is nothing new. Those qualities are on full display within the Terraform. We're all tone-freaks, and we're always trying new things, but Wampler hope this pedal finds it's forever home on your pedalboard, so it was built to last that long.

Technical Details

Built in the U.S.A.
High grade components picked for their superior sound and response
Relay true bypass with soft switch (buffered bypass in trails mode)
Top mounted input and output jacks 9v power jack
Power draw: 64mA (at 9v) and 68mA (at 18v)
Allows for you to use reverb and two delays simultaneously
Maximum 1 second delay
Second delay can be layered on top in 3 different patterns
Relay True/Buffered Bypass
Includes Wampler's limited 5-year warranty
2.50" x 4.50" x 1.5" (63.5mm x 114.3mm x 38.1mm) - height excludes knobs and switches

Notes: How many times have you sat in front of your favorite ambient pedal and felt like you need weeks of training at NASA to use it? Knobs, switches, sliders - It's often SO hard and frustrating to find a usable tone on those things quickly - Keeping that firmly in mind, when Wampler first considered making an ambient pedal, ease of use was a top priority, right up there with top tier quality tone on par with pedals at twice the price.

How do you describe a pedal like the Wampler Ethereal? Does ambient heaven cover it? Is it the gateway between real life and the astral plane? Or is it just gorgeous? It's hard to know which phrase to use when talking about it, because they all match it perfectly - plus, of course, so easy to use you'll be getting those perfectly Ethereal tones instantly.

When designing the Ethereal these were the EXACT thoughts running through the mind of Brian Wampler. He wanted to make a delay that is as pure as you could want, with a time of up to 1s, a reverb that is thick and then have the option to mix them all up and put them together in one glorious effect that will send you away - all the way away while making it as easy to use and easy to find those perfect tones as possible.

It's been a bit of a secret, there isn't one delay lurking within the Ethereal, there are two! The first delay constantly sits there like a heartbeat, coming back at you at quarter notes, Wampler then layer another over the top - that one can be put into a triplet pattern, or a dotted 8th (so you can get that beautiful quarter + dotted 8th mix) and even a self-oscillating dotted eighth pattern that just takes you away and leads you over the edge and down the rabbit hole into perfect ambience - Things can get a little crazy when that one is selected, so you know, knock yourself out - it's there to make some incredibly strange yet beautiful sounds - See that little switch down there? Yep, that's the one, just to the right of the stomp - that's a trails button. When this is used the delay patterns and reverbs sing out after the pedal has been deactivated, so you can even control what you want to come back at you.

While you are enjoying the delay patterns, sitting underneath is that beautifully cavernous plate style reverb that is alive with character and shape, that can be brought in to exactly the right level (whether that be under your guitar, the same level - unity, or even considerably louder) to compliment the delay.

As you can imagine, this has been some feat of engineering (definitely worth waiting for) as we wanted all this to happen from a regular sized box, with the purity of tone and response you would expect from a Wampler. So, as with our other time pedals, we split the signal going in, the effected signal is then laid back on top of the original base tone, making sure that YOUR guitar sounds exactly how it does going in.

The Wampler Ethereal. Not only can it be used a stand alone reverb or delay pedal, it can be combined for you to worship, to get lost in, to even help you inspect your shoes - but most of all, it was designed to inspire.

Technical Details

Built in the U.S.A.
High grade components picked for their superior sound and response
Relay true bypass with soft switch (buffered bypass in trails mode)
Top mounted input and output jacks 9v power jack
Power draw: 64mA (at 9v) and 68mA (at 18v)
Allows for you to use reverb and two delays simultaneously
Maximum 1 second delay
Second delay can be layered on top in 3 different patterns
Relay True/Buffered Bypass
Includes Wampler's limited 5-year warranty
2.50" x 4.50" x 1.5" (63.5mm x 114.3mm x 38.1mm) - height excludes knobs and switches

Notes: Black version of Arturia's superb KeyLab MK3, one of the best MIDI controllers around. 88 full-sized keys with fully weighted Fatar keybed, plus the option to use pads, rotaries, faders, built-in arpeggiator and other performance features.

Supplier's Notes:
Building on the success of their recent rev3. releases (Minilab 3, Keylab Essential 3 and Keylab MK3) Arturia are delighted to share their next gen 88 note controller keyboard, the Keylab 88 MK3.

With a full-size hammer-action aftertouch keybed and next-level software integration encased in hard wearing high-quality materials and hard-wood panelling - KeyLab mk3 88 not only looks the part but will stand the test of time on stage and in the studio.

Keylab 88 MK3 features all of the refinements found in the other MK3 keyboards, but it sports a massive upgrade to it's keybed over previous models, now equipped with a FATAR TP/110 the Keylab 88 MK3 delivers a stunning playing experience, unlike any other 88 note controller on the market.

With a stunning visual display that shows a range of contextual information on-screen alongside touch-sensitive controls and advanced creative features; it enhances every aspect of the music-making process. From integrating effortlessly with Analog Lab Pro and all major DAWs to supporting musical ideation, keyboardists, producers and composers alike can take full command of their setup like never before.

From customizable MIDI settings and intuitive controls to advanced creative features that support musical ideation - KeyLab mk3 is a powerful ally both in the studio and on stage

KeyLab mk3 offers advanced connectivity with all major DAWs including MCU/ HUI protocols, allowing you to view contextual information on-screen, create user programs and have complete control of your music making software and instruments.

With Analog Lab Pro, Ableton Live Lite and a range of timeless instruments from the world-renowned V Collection, discover a suite of pro-grade software to start making music right away.

Main features

Redesigned Keybed

88-note fully-weighted Fatar TP/110 keybed with aftertouch

Pads & controls

1 clickable encoder
9 360- rotary encoders
9 x 50mm faders
8 transport switches
4 command switches
1 modulation wheel & pitch wheel
12 touch & pressure-sensitive pads

Advanced display

Full Color 3.5" 320x480px screen with 8 contextual buttons for intuitive control and feedback

Smart features

Multi-mode arpeggiator
Chord mode with smart voicing
Scale mode
Hold function

Software integration

Seamless integration with Analog Lab V and V Collection instruments: select sounds, browse presets, smart-assigned controls
Advanced integration with FL Studio, Logic Pro, Ableton Live, Cubase, Bitwig Studio
Also compatible with MCU/HUI control
Up to 6 user presets for a totally customizable experience

Included Software titles & services

Analog Lab Pro software with 2000+ sounds
Ableton Live Lite
Mini V, Augmented Strings, Piano V, Rev PLATE-140
2-month Loopcloud subscription
Melodics subscription for 40 lessons

Connectivity

USB-C connects to computers and MIDI Control Center
MIDI 5-pin DIN output for connection to external instruments, gear
Control input for pedal: sustain, modulation and expression plus an additional Aux-in
USB-C powered

Platform specifications

Windows

Win 10+ (64bit)
4 GB RAM
4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost)
3GB free hard disk space
OpenGL 2.0 compatible GPU
ARM processors not supported on Windows

Apple

Mac OS 11+
4 GB RAM
4 cores CPU, 3.4 GHz (4.0 GHz Turbo-boost) or M1 CPU
3GB free hard disk space
OpenGL 2.0 compatible GPU

Required configuration


Works in Standalone, VST, AAX, Audio Unit.
Analog Lab not compatible with NKS

Work with ASC

An elegant and simple solution to help you install, activate, and update your Arturia software instruments.

Box contents

KeyLab 88 mk3 Unit
Laptop plate
Musical sheet holder
USB-C to USB-A cable
Registration card
QuickStart

Size & weight for 88 keys

Size : 50.98 x 12.72 x 4,45 inches (1295 x 323 x 113mm)
Weight : 34.6 lbs. (15.7 Kg)

Notes: Euphoria is a full analogue 8-stage phaser, delivering rich, vintage phase shifting with deep modulation capabilities.

A versatile phaser perfect for lush movement and evolving soundscapes in Eurorack setups.

Specifications & connections

8-Stage Phase Shifter
OTA-Based
1 Input for eurorack level (10pp IN)
1 Input for instrument level (500mVpp)
Built-in LFO
Current Draw: 58mA (+12V), 52mA (-12V)

Included in the box:

Euphoria Eurorack module
1x Ribbon cable
4x 3mm Screws

Requirements:

Eurorack case and power supply
Monitor or Amp.

Notes: ***B-STOCK: Box opened, product in perfect working order***


The Wireless Micro is a pocket-sized solution for capturing pristine audio with your smartphone. It connects directly to your phone with no cables required and features two clip-on transmitters with in-built microphones, so you can get recording in seconds.

Intelligent GainAssist technology will ensure your audio is perfect in any environment and with up to 18 hours of battery life using the included charging case, it is the ideal grab-and-go microphone for smartphone content creation.

Box Contains: 1 x Receiver (RX), 2 x Transmitters (TX), 1 x Charge Case, 2 x Furry Windshields, 1 x SC22 USB-C to USB-C Cable, 2 x Magnetic Attachments

RODE offers a 5-year warranty on this product.

This warranty will function just like any other RODE product warranty and the claim process remains unchanged - as long as the customer purchased an eligible product from an authorised dealer and can present proof of purchase, they can make a warranty claim within 5 years of the date of purchase.

Notes: ***B-STOCK: Box opened, product in perfect working order***


The UDG Ultimate Record Cases are designed to keep your vinyl protected from accidental damage when you transport it to and from gigs. They're compact and lightweight yet tough enough to keep your valuable records safe.

UDG have further fined-tuned already a great design concept of our flight case into one specially for the most discerning DJ/ producer. Constructed from aluminum thus providing an extremely stable structure with lighter weight compared to traditional flight cases.

The UDG Ultimate Record Cases are designed to keep your vinyl protected from accidental damage when you transport it to and from gigs. They're compact and lightweight yet tough enough to keep your valuable records safe.

Specifications

Colour: Silver
Weight: 2,50 kg / 5.5 lbs
Outer Dimensions (W x H x D) 35.0 x 36.0 x 29.5 cm | 13.8 x 14.2 x 11.6 inch
Inner Dimensions (W x H x D) 33.0 x 34.0 x 27.5 cm | 12.9 x 13.4 x 10.8 inch
Material: Aluminium

Extras

Lighter weight than traditional flight cases
Black Diamond finishing surface
Ergonomic & sturdy carry handle
Fits: Approximately up to 80 12"/LP vinyl records. Capacity will depend on the thickness of the records & their packaging.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Class-leading performance from Genelec's compact monitors, packing huge power into a small footprint. 32 Hz - 25 kHz frequency response and 110 dB maximum SPL for true professional sound in a tiny package.

Supplier's Notes:
Nearfield monitoring with real muscle. The 8050B has power in abundance, making it ideally suited to larger spaces and longer listening distances.

Detail and transparency

The 8050B represents a class-leading balance of extraordinary SPL output, expansive dynamic range and an intensely detailed, transparent performance. With superb directivity and a wide sweet spot, you're free to move position and still trust what you're hearing.

Mixes that translate

With its neutral performance and ability to adapt to your room via simple rear-panel room compensation switches, the 8050B ensures a flat playback response to help you really analyse the spectral balance of a recording and produce mixes that always translate reliably.

Package contains:
1 x 8050B monitor
1 x mains cable 1,8 m
1 x operating manual

8050B Technical Specifications

SPL:
110 dB

Amplifier Power:
150 W Bass (Class AB) + 120 W Treble (Class AB)


Frequency Response:
32 Hz - 25 kHz ("-6 dB")

Accuracy of Frequency Response
+/- 2 dB (38 Hz - 20 kHz)

Driver Dimensions
o 205 mm Bass + o 25 mm Treble

Dimensions:
H 452 x W 286 x D 278 mm, with Iso-Pod (view in inches)

Weight:
14.4 kg / 31.7 lb

Connections:
1 x XLR Analog Input

Notes: ***B-STOCK: Box opened, product in perfect working order***


Varia Instruments' turntable weights feature a smart mechanism: The 7" adapter inside the weight is moveable, as soon as you put the weight on a 7", the adapter will fall down through the big hole of the vinyl. Your record is now centered and stabilized by the TTW10. If you place the kit on a 12" record, the adapter will remain in the rear position and stabilizes your warped records. A sticky rubber mat on the bottom side protects your vinyl and allows you to control the record in a very direct way. The TTW10 comes in a neat printed box with a linen bag to take it out to your gigs.