Walrus Audio

Notes: ***B-STOCK: Box opened, product in perfect working order***


The ARP-87 is a compact, feature-rich delay, packed with a large pallet of inspirational delay tones. Featuring four main algorithms, digital, analog, lo-fi, and slap back, the ARP-87 can cover some serious ground in the world of echoes. The Digital algorithm boasts pristine, crystal clear repeats great for rhythmic riffs. The Analog setting works well to add warmth and dimension to chords and lines without getting in the way. The Lo-Fi algorithm, with its adjustable frequency range on the repeats, goes from warm, warped, and murky, to strait AM radio. Finally, the Slap setting makes it easy to dial in a great slap back echo perfect for smoking chicken pickin' runs.

With other features like the smart bypass switching, and momentary knob ramp, the ARP-87 provides endless creative opportunities that are waiting to be explored.The X knob changes functions depending on which Algorithm you are using. It adjusts a specific parameter in each algorithm.

In Digital, Analog, and Slap modes, the knob will control modulation depth. In Lo-fi mode, the knob will control Filter width. Note that when changing delay types this loads a whole new algorithm and the tempo must be tapped in again.

Trails Mode

The ARP-87 can be run in trails or no trails mode. In trails mode, when you turn the pedal off, the delay trails die off naturally. In no trails mode, the delay trails are abruptly cut off when you turn the pedal off. To toggle between either mode, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.

Momentary Functions

When the switch is in off position, press and hold the Bypass Switch to temporarily activate the effect to add a moment of delay texture. Releasing the switch turns the effect off. When the effect is on, press and hold the bypass switch to momentarily ramp the X parameter to maximum. Releasing the switch sets the X parameter back to the knob location. Press and hold the Tap Switch to temporarily ramp the feedback to maximum.
Release to set the feedback back to the knob location.

The ARP-87 comes in a Frosted Charcoal finish with cream and seafoam ink featuring original artwork by Chris Castro of a lone ship traveling through the ARP-87 Galaxies.
Dimensions and power consumption:

6,6 x 12,2 x 5,6 cm (W x D x H)
100 mA

In the box:

Walrus Audio ARP-87
Manual
Sticker
Guitar pick
Pouch

Notes: Super limited edition.

The ARP-87 is a compact, feature-rich delay, packed with a large pallet of inspirational delay tones. Featuring four main algorithms, digital, analog, lo-fi, and slap back, the ARP-87 can cover some serious ground in the world of echoes. The Digital algorithm boasts pristine, crystal clear repeats great for rhythmic riffs. The Analog setting works well to add warmth and dimension to chords and lines without getting in the way. The Lo-Fi algorithm, with its adjustable frequency range on the repeats, goes from warm, warped, and murky, to strait AM radio. Finally, the Slap setting makes it easy to dial in a great slap back echo perfect for smoking chicken pickin' runs.

With other features like smart bypass switching, and momentary knob ramp, the ARP-87 provides endless creative opportunities that are waiting to be explored.The X knob changes functions depending on which Algorithm you are using. It adjusts a specific parameter in each algorithm.

In Digital, Analog, and Slap modes, the knob will control modulation depth. In Lo-fi mode, the knob will control Filter width. Note that when changing delay types this loads a whole new algorithm and the tempo must be tapped in again.

Trails Mode
The ARP-87 can be run in trails or no trails mode. In trails mode, when you turn the pedal off, the delay trails die off naturally. In no trails mode, the delay trails are abruptly cut off when you turn the pedal off. To toggle between either mode, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.

Momentary Functions
When the switch is in off position, press and hold the Bypass Switch to temporarily activate the effect to add a moment of delay texture. Releasing the switch turns the effect off. When the effect is on, press and hold the bypass switch to momentarily ramp the X parameter to maximum. Releasing the switch sets the X parameter back to the knob location. Press and hold the Tap Switch to temporarily ramp the feedback to maximum.
Release to set the feedback back to the knob location.

The ARP-87 comes in a Frosted Charcoal finish with cream and seafoam ink featuring original artwork by Chris Castro of a lone ship traveling through the ARP-87 Galaxies.

Dimensions and power consumption:

6,6 x 12,2 x 5,6 cm (W x D x H)
100 mA
In the box:

Walrus Audio ARP-87
Manual
Sticker
Guitar pick
Pouch

The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.

Notes: ***B-STOCK: Box opened, product in perfect working order***


Super limited edition.

The ARP-87 is a compact, feature-rich delay, packed with a large pallet of inspirational delay tones. Featuring four main algorithms, digital, analog, lo-fi, and slap back, the ARP-87 can cover some serious ground in the world of echoes. The Digital algorithm boasts pristine, crystal clear repeats great for rhythmic riffs. The Analog setting works well to add warmth and dimension to chords and lines without getting in the way. The Lo-Fi algorithm, with its adjustable frequency range on the repeats, goes from warm, warped, and murky, to strait AM radio. Finally, the Slap setting makes it easy to dial in a great slap back echo perfect for smoking chicken pickin' runs.

With other features like smart bypass switching, and momentary knob ramp, the ARP-87 provides endless creative opportunities that are waiting to be explored.The X knob changes functions depending on which Algorithm you are using. It adjusts a specific parameter in each algorithm.

In Digital, Analog, and Slap modes, the knob will control modulation depth. In Lo-fi mode, the knob will control Filter width. Note that when changing delay types this loads a whole new algorithm and the tempo must be tapped in again.

Trails Mode
The ARP-87 can be run in trails or no trails mode. In trails mode, when you turn the pedal off, the delay trails die off naturally. In no trails mode, the delay trails are abruptly cut off when you turn the pedal off. To toggle between either mode, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.

Momentary Functions
When the switch is in off position, press and hold the Bypass Switch to temporarily activate the effect to add a moment of delay texture. Releasing the switch turns the effect off. When the effect is on, press and hold the bypass switch to momentarily ramp the X parameter to maximum. Releasing the switch sets the X parameter back to the knob location. Press and hold the Tap Switch to temporarily ramp the feedback to maximum.
Release to set the feedback back to the knob location.

The ARP-87 comes in a Frosted Charcoal finish with cream and seafoam ink featuring original artwork by Chris Castro of a lone ship traveling through the ARP-87 Galaxies.

Dimensions and power consumption:

6,6 x 12,2 x 5,6 cm (W x D x H)
100 mA
In the box:

Walrus Audio ARP-87
Manual
Sticker
Guitar pick
Pouch

The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.

Notes: Arguably the most important pedal on your board, the Canvas Tuner ensures that your instrument is ready to sound its best with the perfect meld of versatility and precision.

Packaged in the same tough-as-nails, tour-ready enclosure as all Walrus pedals, the Tuner features a bright 2.8" TFT LCD display that can be viewed under just about any stage lighting conditions, multiple screen orientations, i0.1 cent accuracy, buffered or true bypass options and more. The Canvas Tuner ensures that you have the most accurate brush to paint your sonic picture.

Uncompromising Accuracy

Precise and accurate tuning you expect with i0.1 cent accuracy and multiple tuning presets. Tune with confidence, allowing your music to shine with clarity.

A World of Sound at Your Fingertips

With a flat frequency range spanning from 20Hz to 20KHz, the Walrus Audio Tuner is ready to handle tuning for low bass notes to high-strung acoustics. Even bassists needing that low B rumble can tune with confidence.

See the Music Come to Life

The 2.8" TFT LCD display is your window to pitch-perfection. Its crystal-clear quality ensures your tuning is always on point, even under the blazing stage lights or glaring sunlight.

Tailored to Your Preferences

Tailor your tuning experience to your liking with multiple screen orientation options and selectable Strobe or Needle tuning modes. Your preferences, your performance.

Your Aesthetic, Your Way

Match your style with ease. The Walrus Audio Tuner comes with eight colour themes and multiple screen savers including a custom picture mode* allowing you to personalize your tuner to fit your unique aesthetic. *Photos can be uploaded to the tuner via walrusaudio.io.

Tune Faster with Tune Assist

Let Tune Assist guide you swiftly and accurately through your tuning process. Quick and easy tuning has never been so effortless. With Tune Assist, once your note stays in tune longer than a pre-determined threshold, a border outlining the display will flash letting you know that you are in tune and can move to the next string.

Versatile Bypass Options

Enjoy ultimate flexibility with buffered bypass which routes your audio through the clean, low-noise, high headroom audio buffer with a Total Harmonic Distortion ratio of .001%. This buffer offers a high input impedance of 1M Ohms and low output impedance of 400 Ohms to maintain the highest level of single integrity. Other available bypass modes include relay bypass, monitor mode, and pass-thru.

Customize Your Reference Pitch

Adjust the reference pitch from 390Hz to 490Hz to suit your musical needs. Precision tuning for any style of music.

Stay Current with Firmware Updates

Keep your tuner up to date with firmware updates via www.walrusaudio.io. Experience continuous improvement and new features as they become available.

Notes: Eras is a no apologies, high-gain distortion that's ready to chug, shred, and palm mute with tight response and multiple clipping options. Use the Blend knob at max for a full distortion onslaught or roll back the Blend knob to creatively stack and mix other dirt pedals placed in front of Eras. Great for bassists that want to blend in their dry signal as well. Anywhere you set it, the Eras is ready to deliver a diverse world of speaker ripping sounds.

The Eras features a five-position rotary knob that offers the following gain states:

Tight mode with a slight mid-cut, LED hard clipping, and internal volume compensation. Fastest response, great for palm muting.

Tight mode with a slight mid-cut and silicon hard clipping. Smooth with added compression.

Dual clipping mode with a slight mid-cut and both silicon and LED hard clipping. Rich & full with added sustain.

Rhythm mode with a deeper mid-cut, LED hard clipping, and internal volume compensation. Scooped mids, tight response.

Rhythm mode with a deeper mid-cut and silicon hard clipping. Rhythmic, warm and full.

Think of each position as a different "flavour" of the pedal. Blend in dry signal or other pedals in combination with the gain states for a near-infinite amount of distortion sounds.

The Eras comes in a translucent red enclosure with yellow, cream, and black ink. Artwork by Adam Forster features a mythical four-horned, winged Bull ready to stampede into any mosh pit.

Dimensions and power consumption:

0.25kg
6,6 x 12,2 x 5,6 cm (W x D x H)
100 mA
In the box:

Walrus Audio Eras
Manual
Sticker
Guitar pick
Pouch

Notes: Eras is a no apologies, high-gain distortion that's ready to chug, shred, and palm mute with tight response and multiple clipping options. Use the Blend knob at max for a full distortion onslaught or roll back the Blend knob to creatively stack and mix other dirt pedals placed in front of Eras. Great for bassists that want to blend in their dry signal as well. Anywhere you set it, the Eras is ready to deliver a diverse world of speaker ripping sounds.

The Eras features a five-position rotary knob that offers the following gain states:

Tight mode with a slight mid-cut, LED hard clipping, and internal volume compensation. Fastest response, great for palm muting.

Tight mode with a slight mid-cut and silicon hard clipping. Smooth with added compression.

Dual clipping mode with a slight mid-cut and both silicon and LED hard clipping. Rich & full with added sustain.

Rhythm mode with a deeper mid-cut, LED hard clipping, and internal volume compensation. Scooped mids, tight response.

Rhythm mode with a deeper mid-cut and silicon hard clipping. Rhythmic, warm and full.

Think of each position as a different "flavour" of the pedal. Blend in dry signal or other pedals in combination with the gain states for a near-infinite amount of distortion sounds.

The Eras comes in a translucent red enclosure with yellow, cream, and black ink. Artwork by Adam Forster features a mythical four-horned, winged Bull ready to stampede into any mosh pit.

Dimensions and power consumption:

6,6 x 12,2 x 5,6 cm (W x D x H)
100 mA

In the box:

Walrus Audio Eras
Manual
Sticker
Guitar pick
Pouch

Notes: The Iron Horse is a new take on a classic distortion circuit that's thick, punchy, riffy, and rowdy. With the help of the Si/LED knob and wide range of the distortion knob, this true bypass, high-gain behemoth can be finely tuned for clear overdriven sounds or let the reigns loose for a full-on distorted onslaught. Top mount jacks with soft switch bypassing and art by David Huttner complete the package for a pedal board-ready distortion machine.

The Iron Horse V3 updates are as follows:
Top-mounted jacks
Soft relay true bypass on/off
Fixed volume drop-off when the distortion knob is at minimum
Re-imagined the hard clipping toggle as a blend style potentiometer, that allows you to blend between symmetrical silicon and diode clipping for a new variety of tones.

Owners of the previous versions of the Iron Horse will be familiar with the three distortion modes operated by a toggle switch to change between different clipping modes.

The switch has now been replaced with a blending knob opening up a wealth of ways to alter your tone.When the knob is set to the left, the distorted signal will be using Silicon clipping diodes adding in a high amount of compression.
Rotating the knob to the right will bring in LED clipping and a smaller amount of compression.
Putting the knob at noon will blend between the two using different ratios of the Silicone and LED clipping diodes for more complex clipping sounds.

Note: Since the Si/LED knob is changing the internal gain and clipping style, the other controls will behave slightly differently as well.

You will need to use the volume knob to adjust the overall output up or down depending on where you have the knob set.

Dimensions and power consumption:

6,6 x 12,2 x 5,6 cm (W x D x H)
100 mA

In the box:

Walrus Audio Iron Horse V3
Manual
Sticker
Guitar pick
Pouch

Notes: Super Limited edition.

The Julia is a fully analog, feature-rich chorus/vibrato packed with a wide array of tonal landscapes begging to be explored. Julia is able to produce mild smooth chorus, to seasick vibrato and everywhere in between. With controls like Lag, Dry-Chorus-Vibrato Blend, and selectable analog LFO wave shapes, you are able to dial in all types of classic and unique chorus/vibrato sounds not found on traditional chorus pedals.

In 1999, spectrographs picked up an unexplained sound emanating from dark ocean depths. The source of the sound was untracable. While most scientists attributed it to an iceberg draging the ocean floor, some skeptics began to understand the true source of the sound. Julia, the water demigoddess. Crying from the deep in a chorus of melancholy hymns, she remains to be uncaught but the pursuit for her is unceasing. Walrus has captured a fraction of her powers in the Julia Analog Chorus/Vibrato.

9V DC, 30mA
121 x 66 x 41 mm, 0.27 kg
Made in Oklahoma, USA

Dimensions and power consumption:

6,6 x 12,2 x 5,6 cm (W x D x H)
100 mA

In the box:

Walrus Audio Julia V2
Manual
Sticker
Guitar pick
Pouch

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


*** Onyx Edition ***

The Julia is a fully analogue, feature-rich chorus/vibrato packed with a wide array of tonal landscapes begging to be explored. Julia is able to produce mild smooth chorus, to seasick vibrato and everywhere in between. With controls like Lag, Dry-Chorus-Vibrato Blend, and selectable analogue LFO wave shapes, you are able to dial in all types of classic and unique chorus/vibrato sounds not found on traditional chorus pedals.

In 1999, spectrographs picked up an unexplained sound emanating from dark ocean depths. The source of the sound was untraceable. While most scientists attributed it to an iceberg dragging the ocean floor, some sceptics began to understand the true source of the sound. Julia, the water demigoddess. Crying from the deep in a chorus of melancholy hymns, she remains to be uncaught but the pursuit for her is unceasing. Walrus has captured a fraction of her powers in the Julia Analog Chorus/Vibrato.

9V DC, 30mA
121 x 66 x 41 mm, 0.27 kg
Made in Oklahoma, USA

Dimensions and power consumption:

6,6 x 12,2 x 4,1 cm (W x D x H)
100 mA

In the box:

Walrus Audio Julia V2
Manual
Sticker
Guitar pick
Pouch

Notes: Like the Iguana that's malleable to its environment, blending into its surroundings for harmonious balance or standing out with vibrant confidence, the Polychrome Flanger is a uniquely colourful tool for adding modulated textures to songs.

The Polychrome Flanger is a true bypass, all analogue Flanger pulling in familiar layout controls from the Julia and Lillian.
Dial in a wealth of colourful flange with the D-F-V blend knob and the shape and voice switches.
The Shape Switch lets you select from sine, triangle, or random LFO wave to modulate the delay line

The Voice Switch lets you select between two voices for the flanging effect.
In the down position, the flanger is more traditional and full frequency.
In the up position, you get a more complex and notched flange effect with less low end.

Like the other members of the Walrus Audio modulation family, the Polychrome has a blend knob. The D-F-V (Dry, Flange, Vibrato) knob lets you blend the dry and delayed signal from full dry at minimum (no effect), to traditional flange at noon to full pitch vibrato at maximum. Don't sleep on the vibrato sounds in the Polychrome.
Set the D-F-V knob to maximum, feedback to a minimum, and the voice switch up for some unique pitch vibrato.

Top mounted input, output, and power jacks as well as soft switch relay bypassing make the Polychrome fit well on your board and ensure smooth operation for years to come.

Specs
The Polychrome comes in a flat black enclosure with purple, yellow, coral, green and white ink, featuring original artwork by David Huttner.
Power supply not included.

Dimensions and power consumption:
0.25kg
6,6 x 12,2 x 5,6 cm (W x D x H)
50 mA

In the box:

Walrus Audio Polychrome
Manual
Sticker
Guitar pick
Pouch

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Like the Iguana that's malleable to its environment, blending into its surroundings for harmonious balance or standing out with vibrant confidence, the Polychrome Flanger is a uniquely colourful tool for adding modulated textures to songs.

The Polychrome Flanger is a true bypass, all analogue Flanger pulling in familiar layout controls from the Julia and Lillian.
Dial in a wealth of colourful flange with the D-F-V blend knob and the shape and voice switches.
The Shape Switch lets you select from sine, triangle, or random LFO wave to modulate the delay line

The Voice Switch lets you select between two voices for the flanging effect.
In the down position, the flanger is more traditional and full frequency.
In the up position, you get a more complex and notched flange effect with less low end.

Like the other members of the Walrus Audio modulation family, the Polychrome has a blend knob. The D-F-V (Dry, Flange, Vibrato) knob lets you blend the dry and delayed signal from full dry at minimum (no effect), to traditional flange at noon to full pitch vibrato at maximum. Don't sleep on the vibrato sounds in the Polychrome.
Set the D-F-V knob to maximum, feedback to a minimum, and the voice switch up for some unique pitch vibrato.

Top mounted input, output, and power jacks as well as soft switch relay bypassing make the Polychrome fit well on your board and ensure smooth operation for years to come.

Specs
The Polychrome comes in a flat black enclosure with purple, yellow, coral, green and white ink, featuring original artwork by David Huttner.
Power supply not included.

Dimensions and power consumption:
0.25kg
6,6 x 12,2 x 5,6 cm (W x D x H)
50 mA

In the box:

Walrus Audio Polychrome
Manual
Sticker
Guitar pick
Pouch

Notes: *** Onyx Edition ***

Like the Iguana that's malleable to its environment, blending into its surroundings for harmonious balance or standing out with vibrant confidence, the Polychrome Flanger is a uniquely colourful tool for adding modulated textures to songs.

The Polychrome Flanger is a true bypass, all analogue Flanger pulling in familiar layout controls from the Julia and Lillian.
Dial in a wealth of colourful flange with the D-F-V blend knob and the shape and voice switches.
The Shape Switch lets you select from sine, triangle, or random LFO wave to modulate the delay line

The Voice Switch lets you select between two voices for the flanging effect.
In the down position, the flanger is more traditional and full frequency.
In the up position, you get a more complex and notched flange effect with less low end.

Like the other members of the Walrus Audio modulation family, the Polychrome has a blend knob. The D-F-V (Dry, Flange, Vibrato) knob lets you blend the dry and delayed signal from full dry at minimum (no effect), to traditional flange at noon to full pitch vibrato at maximum. Don't sleep on the vibrato sounds in the Polychrome.
Set the D-F-V knob to maximum, feedback to a minimum, and the voice switch up for some unique pitch vibrato.

Top mounted input, output, and power jacks as well as soft switch relay bypassing make the Polychrome fit well on your board and ensure smooth operation for years to come.

Specs

Power supply not included.

Dimensions and power consumption:
0.25kg
6,6 x 12,2 x 5,6 cm (W x D x H)
50 mA

In the box:

Walrus Audio Polychrome
Manual
Sticker
Guitar pick
Pouch

Notes: ***B-STOCK: Product has light surface marks/scratches, but otherwise in perfect working condition***


The Slotva Multi Texture Reverb is a variant of the Slo but adds on the ability to create and save three presets. Save your favorite dreamscapes by simultaneously pressing and holding down on the bypass and sustain switches. Scroll through them by simultaneously pressing and releasing bypass and sustain. The Slotva allows players to create lush, modulated, sleepy and ambient soundscapes. Stocked with three different algorithms specifically designed to invoke textures for bringing dreams from your subconscious to reality.

The toggle switch allows three different reverb modes: Dark (Lower Octave), Rise (Ambient Swell) and Dream (Latching Pad), while secondary functions on the switch change between different wave shapes for the modulation on the reverb trail. Combine deep modulation with long washy trails and experience, the Slotva.

Algorithms

Use the toggle switch to select one of three onboard algorithms.
DARK - Add a lower octave to your reverb trail. Here you'll create deep and wide atmospheric sounds and channel nightmarish soundscapes. X knob sets the level of a -1 octave signal that feeds the reverb.
RISE - This is an auto-swell reverb for beautiful cinematic swells. Don't rush it. Let it breathe and gently wake up. X knob sets the amount of time it takes the reverb to swell in after a note is played. Set lower for shorter rise times and higher for longer rise times.
DREAM - Here is a lush reverb with a latching pad function. Press the sustain switch to latch signal. Experiment with the X knob to add vibrato over the pad. Press sustain again and pad will decrescendo according to where decay knob is set. X knob sets the depth of vibrato applied to the reverb trail.

The Slotva also features 3 different wave shapes accessible by holding down bypass while switching the algorithm toggle.

Modulation Wave Shapes:

SINE -Smooth and even pitch up and down modulation.
WARP -Asymmetric pitch up modulation similar to a warped record.
SINK -Asymmetric pitch down modulation for sinking detune similar to a Bigsby.

MOMENTARY FUNCTIONS

Bypass: Turns the effect on and off. It also features "smart bypass switching". When the switch is in off position, press and hold to temporarily activate the effect to add a moment of reverb texture. Releasing the switch turns the effect off, and fades itout.
Sustain: When pressed, the decay switch ramps up the reverb trail to maximum creating long dreamy reverb trail and then ramps back down to the decay knob setting when released. In the "Dream" algorithm, the sustain switch is latching. Press it once to capture and sustain the current reverb decay for extremely long pad-like sounds. Press it again to let the reverb trail taper off, based on the position of the decay knob.

TRAILS MODE

The Slotva can run in trails or no trails mode. In trails mode, when you turn the pedal off, the reverb decay dies off naturally. In no trails mode, the decay is abruptly cut off when you turn the pedal off. To toggle between either mode, hold down the bypass switchfor 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.

PRESET SPILLOVER

When scrolling through presets, there is only preset spillover if the next preset is the same algorithm as the one preceding it. For example, if your red and green presets are both in Dream mode, switching from red to green will not cut your reverb trails.

The Slo comes in a Lollipop Blue finish with light blue and off white ink featuring original artwork by Christi Du Toit.
The diecast enclosure's exact size is 4.77" x 2.6" x 1.39".
Power requirements are 9VDC (100mA minimum).
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.
Power supply not included.

Dimensions and power consumption:

6,6 x 12,2 x 5,6 cm (W x D x H)
100 mA
In the box:

Walrus Audio Slotva
Manual
Sticker
Guitar pick
Pouch

Notes: Eras is a no apologies, high-gain distortion that's ready to chug, shred, and palm mute with tight response and multiple clipping options. Use the Blend knob at max for a full distortion onslaught or roll back the Blend knob to creatively stack and mix other dirt pedals placed in front of Eras. Great for bassists that want to blend in their dry signal as well. Anywhere you set it, the Eras is ready to deliver a diverse world of speaker ripping sounds.

The Eras features a five-position rotary knob that offers the following gain states:

Tight mode with a slight mid-cut, LED hard clipping, and internal volume compensation. Fastest response, great for palm muting.

Tight mode with a slight mid-cut and silicon hard clipping. Smooth with added compression.

Dual clipping mode with a slight mid-cut and both silicon and LED hard clipping. Rich & full with added sustain.

Rhythm mode with a deeper mid-cut, LED hard clipping, and internal volume compensation. Scooped mids, tight response.

Rhythm mode with a deeper mid-cut and silicon hard clipping. Rhythmic, warm and full.

Think of each position as a different "flavour" of the pedal. Blend in dry signal or other pedals in combination with the gain states for a near-infinite amount of distortion sounds.

The Eras comes in a translucent red enclosure with yellow, cream, and black ink. Artwork by Adam Forster features a mythical four-horned, winged Bull ready to stampede into any mosh pit.

Each mode features different type of compression, bass-response, clipping and gain-amount

Mode 1: Slight mid-cut, LED hard-clipping (tight-response e.g. for palm muting)
Mode 2: Slight mid-cut, Silicon hard-clipping (smooth with added compression)
Mode 3: Slight mid-cut, dual LED/Silicon hard-clipping (rich tone with added sustain)
Mode 4: Deep mid-cut, LED hard-clipping (scooped mids, tight response)
Mode 5: Deep mid-cut, Silicon hard-clipping (rhythmic, warm and full)

True bypass
Top mounted Input & Output
9-volt DC, Center Negative, 100mA minimum
Power Supply not included
Made in the USA

Dimensions and power consumption:
6,6 x 12,2 x 5,6 cm (W x D x H)
100 mA

In the box:
Walrus Audio Eras
Manual
Sticker
Guitar pick
Pouch

Notes: Super limited edition.

The Fathom is a feature-rich reverb with 4 different customized reverb algorithms to choose from. Easily go from tasteful, small room reverb to long, modulated trails dripping of ambient goodness. The toggle switch adds options for low, medium and high modulation. Use the dampen knob to fine tune the tone of the reverb's decay.

The Fathom features 4 different algorithms
Hall - Wide, open and vast with decay that ends with high-frequency rolloff. X knob adjusts pre-delay.
Plate - Full Body reverb with a smooth decay. X knob adjusts pre-delay.
Lo-fi - Filtered reverb with decay ranging from warm, to thin AM-sounding radio. X knob adjusts filter width.
Sonar - Reverb fed with both a high and low octave with the ability to blend the octaves with the X knob.
When the pedal is in off position, press and hold the Bypass Switch to temporarily activate the effect to add a moment of reverb. Releasing the switch turns the effect off.

Press and hold the Sustain Switch while the pedal is on, to sustain the reverb decay for a dreamy ambient decrescendo.
To turn trails mode on or off, unplug the pedal and press and hold down the Bypass Switch for two seconds while plugging the pedal back in.
Dimensions and power consumption:

6,6 x 12,2 x 5,6 cm (W x D x H)
100 mA
In the box:

Walrus Audio Fathom
Manual
Sticker
Guitar pick
Pouch

Notes: Analogue flanger pedal which promises to be as versatile as an iguana. Fair enough. Flange and vibrato effects with LFO modulation and plenty of sound-sculpting options.

Supplier's Notes:
Like the Iguana that's malleable to its environment, blending in to its surroundings for harmonious balance or standing out with vibrant confidence, the Polychrome Flanger is a uniquely colorful tool for adding modulated textures to songs.

The Polychrome Flanger is a true bypass, all analog Flanger pulling in familiar layout controls from the Julia and Lillian. Dial in a wealth of colorful flange with the D-F-V blend knob and the shape and voice switches.

The Shape Switch lets you select from sine, triangle, or random LFO wave to modulate the delay line.

The Voice Switch lets you select between two voices for the flanging effect. In the down position, the flanger is more traditional and full frequency. In the up position, you get a more complex and notched flange effect with less low end.

Like the other members of the Walrus Audio modulation family, the Polychrome has a blend knob. The D-F-V (Dry, Flange, Vibrato) knob lets you blend the dry and delayed signal from full dry at minimum (no effect), to traditional flange at noon to full pitch vibrato at maximum. Don't sleep on the vibrato sounds in the Polychrome. Set the D-F-V knob to maximum, feedback to a minimum, and the voice switch up for some unique pitch vibrato.

Top mounted input, output, and power jacks as well as soft switch relay bypassing make the Polychrome fit well on your board and ensure smooth operation for years to come.

Specs:

The Polychrome comes in a flat black enclosure with purple, yellow, coral, green and white ink, featuring original artwork by David Huttner.

Exact size of the diecast enclosure is 4.77" x 2.9" x 2.3".

Power requirements are 9VDC (50mA minimum).

Power supply not included.