Nu-X

Notes: The Reissue series 63 Diamond pedal offers players a range of overdrive that emulates the sound of a classic British 30-watt class-A valve amplifier, much-revered by guitarists since 1959 for its tonally rich clean and crunchy overdrive sound. The styling of the 63 Overdrive is a nod towards the cabinet that stood behind the bands of the British blues invasion and rock bands of the 1970's through to present day guitar bands. Volume and Master controls let you dial in the drive, with a tone Cut control just like the real amplifier. A Top boost switch introduces additional bite and was a later addition to the design in 1963, which is where this pedal gets its name. Invoking 60's British cool in a single pedal was never this easy before.

Batteries: 9V PP3 (supplied)
Power supply: Optional 9Vdc 300mA regulated (not supplied)
Controls: Volume, Master, Cut, Top Boost & foot switch
Input impedance: 1M Ohms
Output impedance: 10k Ohms
Dimensions: 121 x 77 x 48mm
Weight: 230g

In the Box

63 Diamond overdrive pedal
9V PP3 battery

Notes: The Reissue series 6ixty 5ive overdrive puts the sound of the famous1960s black panel amplifiers right at your feet. Emulating the drive of these classic models gives a range of tones from just over-the-edge all the way to burning tube overdrive whilst retaining the guitar's natural voice and clearly defined edge. The all analogue circuit has a Gain control to adjust the amount of drive and the resulting output is balanced by the Level control. A Trim pot on the rear of the pedal further controls the saturation of the gain stage, bringing natural sounding compression and sustain into play. Bass and Treble controls provide tone shaping as you would find on a classic amplifier. Use as an "always on" drive pedal or switch in for a gain boost with a classic edge whenever the mood needs it.

Classic 1960's black panel amplifier tones
Level and Gain with Trim pot for drive & saturation settings
Bass & Treble EQ controls
True bypass switching
Batteries9V PP3 (supplied)
Power supply: Optional 9Vdc 300mA regulated (not supplied)
Controls: Level, Gain, Bass, Treble, Trim & foot switch
Input impedance: 1M Ohms
Output impedance: 10k Ohms
Dimensions: 121 x 77 x 48mm
Weight: 230g

In the box

The box for this item contains :

Reissue series 6ixty 5ive overdrive pedal
9V PP3 battery

Notes: Amp Academy Pedal

The Amp Academy is a complete valve amp modelling rig in a compact stomp box format. 3 storable scenes with 2 channels, selectable from 6 separate classic amplifier models. Each patch has Gain, Master and Boost for overdriven tones and 3-band EQ + Presence control. As with a real professional tube amp, there is an effects loop and internal rever effect. The addition of a noise gate helps to keep everything silent when no notes are played. Balanced or unbalanced outputs give flexible options for live performances via FRFR speakers, mixing console, or even for direct recording. All settings are fully editable via USB using the proprietary Amp Academy software and even self-made or third party IRs can be loaded for custom amp modelling. Next time you are carrying your heavy valve amplifier around, consider this incredibly flexible and pocket-sized alternative.

Power supply: 9Vdc, 100mA (min) pin-negative (not included)
Controls: Gain, Master, Boost, NR, Bass, Middle, Treble, Presence
Connections: Guitar in/out (6.3mm), Loop (6.3mm TRS), Aux (3.5mm), DI (XLR)
Dimensions: 115 x 105 x 58mm
Weight: 440g

Notes: Damp is the name given to this miniature digital reverb pedal to describe the immersive sound image provided by its 3 inbuilt reverb models. A choice of Spring, Plate or Hall reverberation types can be selected by the illuminated push button at the top of the pedal. Holding this button down during power-up selects between mono output or stereo output, which requires a stereo jack lead. Three rotary controls adjust Decay, Level and Tone settings as required. Pressing the footswitch activates or deactivates the effect, whilst holding this pedal enables a secondary effect - Shimmer in Plate mode or Freeze in Spring or Hall modes. The Damp pedal is versatile enough to cover a wide range of reverb styles with a minimal footprint on guitarists' pedalboards or for patching into an effects loop for other instruments or even vocals.

Power supply: 9Vdc (DC5521 connector, negative centre, adaptor not supplied)
Controls: Decay, Level, Tone and 3 reverb modes switch
Dimensions: 94 x 53 x 51mm
Weight: 175g

In the box

The box for this item contains :

Damp digital reverb pedal

Notes: Evolving from the popular Metal Core Deluxe pedal, the mkII version now has 3 selectable amplifier models based on much-revered high gain valve amplifiers. Now with an additional Middle control, the 3-band EQ pairs with Gain and Master to offer a full completement of real amplifier controls, with settings stored into each of the 3 amp models for fast recall. Metal Core Deluxe mkII goes a step further to include IR cabinet simulation, meaning that it can be used directly into a full-range PA system, or without IR simulation into the front of a guitar amplifier as a hard-edged drive pedal. Whichever wiring method is used, Metal Core Deluxe mkII delivers the full breadth of metal tones for hard rock to thrash.

3 distinct high gain amplifier models
3-band EQ
Switchable IR cabinet simulation
Settings auto-stored for each model
True bypass
USB-C for firmware updates & future software

Power supply: 9Vdc (PP3) battery or optional power adaptor
DC input connection: DC5521 jack (for optional adaptor - pin-negative)
Current consumption: <120mA
Controls: Gain, Master, Bass, Middle, Treble, Model switch
Modes: Duo Rect, Fireman, VH4
Input: 6.3mm jack
Output: 6.3mm jack
Input impedance: 1M ohm
Output impedance: 1k ohm
Dynamic range: 104dB
Dimensions: 122 x 72 x 47mm
Weight: 270g

In the box

The box for this item contains :

Metal Core Deluxe mkII pedal
Alkaline PP3 battery

Notes: MG-101 is a complete guitarist's tone companion in a compact yet versatile floor unit. Hiding inside the minimalist housing is a full suite of amplifier tones and a huge palette of guitar and bass effects across 10 distinct audio processing blocks. Amp modelling is based on TSAC-HD White Box Amp Modeling Technology, which delivers high definition analogue circuit simulation for pro quality guitar tones, with speaker cabinet emulation processed via an impulse response (IR) loader with 25 internal models and 12 additional user slots for importing your own files. A built-in expression pedal covers wah and swell effects amongst other possibilities. All settings can be edited onboard with parameters shown on the full colour display or via USB using the downloadable PC/Mac Quicktone software and then stored into one of 36 internal memory locations for recalling at will. In addition to the internal metronome, the built-in Jam function has a fully featured drum machine and 30 second stereo (60s mono) phrase looper. To integrate with a DAW studio suite, the USB also functions as a high quality audio interface, completing the studio-ready guitar rig. The main output can deliver stereo or mono audio directly to a PA or to guitar amplifiers, with a separate TRRS minijack output for headphones or 2-way connection to a smart phone for live streaming. Without breaking the bank, you can have world-class amp modelling and effects with all the essential tools a recording and gigging guitarist needs in a portable and convenient package.

Power supply: 9Vdc DC5521 pin-negative (power adaptor included)
Current consumption: <250mA
Inputs: 6.3mm jack (guitar), 3.5mm jack (aux input)
USB port: USB-C audio interface and PC/Mac editing
Sampling format: 48kHz, 32-bit
Frequency response: 20Hz - 20kHz (+/-1dB)
Output: 6.3mm stereo jack line out (to amp or mixer)
Headphone connector:3.5mm jack (TRRS for smartphone livestreaming)
Input impedance: Guitar 470k Ohms, Aux 25k Ohms
Dynamic range: 104dB
Output impedance: 1k Ohm
Dimensions: 289 x 160 x 71mm
Weight: 920g

In the Box:

MG-202 multi-effect pedal
9Vdc 500mA power adaptor
USB cable
User manual
Warranty card

Notes: MG-30 is the flagship modelling effect processor in the NuX range. Dual high speed processing offers accurate modelling of 30 different amplifier options, including bias tweaking for an extra dimension of response adjustment, all using the proprietary NuX TSAC-HD algorithm. Impulse response programming presents a choice of 8 guitar cabinets, 8 bass cabinets, 8 microphones in 3 different axis positions and even 3 acoustic guitar emulation profiles. Once the main guitar tone is programmed, there are 8 effects blocks which can be assigned to different positions in the signal chain, including WAH, CMP, GATE, EFX, EQ, MOD, DLY & RVB. An expression pedal covers wah and swell effects amongst other possibilities. Each has modes and/or parameters which can be adjusted and saved within the patch as needed. Real-time editing uses rotary encoders and switches, making for a natural and organic process and all prameters and graphics are displayed on a vibrant 4" colour display. Add to this a fully functioning USB audio interface, phrase looper, PC/Mac editor/librarian/updater, aux input, effects loop, drum machine and NMP-2 footswitch control and the MG-30 covers practically all bases. This unit provides all the processing power and audio quality that could be asked from any professional guitar processor at a fraction of the price of its component features.

Specifications:

Power supply: 9Vdc, 400mA pin-negative (adaptor included)
Inputs: 6.3mm jack (guitar), 3.5mm jack (aux input)
Outputs: 2 x 6.3mm jack (L/mono + R) to amp or mixer
Sends: returns: 6.3mm jack send (1k ohm) & return (220k ohm)
Headphone output: 3.5mm stereo jack
USB port: USB type-C for audio interface, PC/Mac editing & updating
Remote control connection: EXP1 TRS 6.3mm jack
Sampling format: 48kHz, 32-bit
Frequency response: 20Hz - 20kHz (i1dB)
Input impedance: 1M ohm
Output impedance: 1k ohm
Dynamic range: 110dB
Dimensions: 313 x 166 x 54mm
Weight: 1.5kg

The box for this item contains :

MG-30 multi-effects modeler pedal
1 x 9Vdc power adaptor (UK)
1 x NMP-2 dual footswitch (173.352UK)
1 x patch cable
1 x USB cable

Notes: The NU-X MG-400 builds on the success of the ground-breaking MG-300 compact multi-FX pedal, adding dual processors and delivering high-definition models and increased flexibility. Integrated effects sections include Drive, Amp Simulation, I.R cabinet simulation, Modulation, Delays & Reverbs with a host of options within each category. Audio modelling is based on the NU-X TSAC-HD algorithm, which delivers high-definition analogue circuit simulation for pro quality guitar tones. An expression pedal covers wah and swell effects amongst other possibilities. All settings can be edited onboard or via USB using the downloadable PC/Mac Quicktone software and then stored into one of 36 internal memory locations. For live or rehearsal backing, the built-in Jam function has a fully featured drum machine and phrase looper. To integrate with a DAW studio suite, the USB also functions as a high-quality audio interface, completing the studio-ready guitar rig. The main output can be stereo or mono for guitar amplifiers or D.I to studio equipment. There is an additional 3.5mm output for stereo headphones. Expanding the control surface has provided space for additional control footswitches for a smoother and more accessible live playing experience.

Specifications

Power supply: 9Vdc, 280mA pin-negative (adaptor included)
Inputs: 6.3mm jack (guitar), 3.5mm jack (aux input)
USB port: USB type-C for audio interface and PC/Mac editing
Sampling format: 48kHz, 32-bit
Frequency response: 20Hz - 20kHz (+/-1dB)
Outputs: L/Mono + R 6.3mm jack, stereo 3.5mm headphones
Latency: 1.1ms
Dynamic range: 108dB
THD: +N<0.03%
Input impedance: 470k ohms (Aux 10k ohms)
Output impedance: 1k ohm (Headphones 47 ohms)
Dimensions: 289 x 160 x 71mm
Weight: 920g

In the box

The box for this item contains:
MG-400 multi-FX pedal
9Vdc UK power adapter

Notes: Pulse is a miniature IR (impulse response) loader pedal, that can apply a specific tonal profile to the input signal. Speaker cabinets typically change the tone of a guitar or bass guitar in a musical way, which is often collected using a microphone for sending to a mixing console for recording or sound reinforcement. Connecting the signal to a mixer before the speaker usually produces a sterile and harsh sound, which is where the Pulse pedal comes in. This pedal can mimic the speaker cabinet and microphone, meaning that the guitar signal can be taken straight from the preamp section and injected into a channel on the mixer. Another use for IR loaders is to mimic the response of an acoustic guitar, making an electric guitar sound more like an acoustic or an electro-acoustic guitar sound more natural. Pulse has modes for guitar cab, bass cab or acoustic guitar with 8 selectable types of each, adjusted by Level and Space controls. A 3.5mm headphone output means that this pedal can also be used for silent practice and an inbuilt audio to USB interface means that it can be used as the front end for a PC or Mac computer recording setup. Pulse is an invaluable guitarists and bass players multi-tool for practice, live and recording duties.

Power supply: 9Vdc (DC5521 connector, negative centre, adaptor not supplied)
Controls: Level, Space, 8-model selector and 3 IR modes switch
Dimensions: 94 x 53 x 51mm
Weight: 175g

In the box

The box for this item contains :

Pulse IR loader pedal

Notes: Sculpture is a mini compressor pedal with professional performance. Sustain and level controls adjust the compression and output, whilst blend gives the ability to add back in some of the unaffected signal to give a more natural attack. Hold down the on/off pedal to switch between soft clip and clean compression modes. Perfect for long sustain chords and clean lead tones.

Adjustable sustain and level
Blend control to feed in some natural attack
Selectable soft clip and clean modes
Requires 9V center negative DC Power Supply 75mA current draw (Not Supplied)
Compatible power supply 173.290UK

Power supply: 9Vdc (centre-negative power adaptor required)
Current consumption: 100mA
Input impedance: 1M Ohm
Output impedance: 20 Ohm
Controls: Sustain. Blend, Level, On/Off/Mode switch
Dimensions9: 4 x 53 x 51mm
Weight: 174g

In the box
The box for this item contains :
Sculpture mini pedal

Notes: Voodoo Vibe is a mini guitar effect pedal that is recreates the rotating speaker effects produced by the classic uni vibe pedals used by famous guitarists from the 60's to the present day. Controls for Speed, Intensity and Volume give a wide range of adjustment to home in on the perfect vibe effect. An illuminated mini push button above the rotary controls can switch between a classic psychedelic vibe effect or a more chorus-type effect. Holding this button down during power-up selects between mono output or stereo output, which requires a stereo jack lead. Pressing the footswitch engages or disengages the effect. The smart tap tempo feature means that the pedal recognises pressing the footswitch twice or in a short space of time and responds to the timing as a tap tempo function. Perfect for trippy arpeggios and ethereal chord work.

Power supply: 9Vdc (DC5521 connector, negative centre, adaptor not supplied)
Controls: Speed, Intensity, Volume and Vibe/Chorus switch
Dimensions: 94 x 53 x 51mm
Weight: 175g

In the box

The box for this item contains :

Voodoo Vibe pedal

Notes: ***B-STOCK: Box opened, product in perfect working order***


Voodoo Vibe is a mini guitar effect pedal that is recreates the rotating speaker effects produced by the classic uni vibe pedals used by famous guitarists from the 60's to the present day. Controls for Speed, Intensity and Volume give a wide range of adjustment to home in on the perfect vibe effect. An illuminated mini push button above the rotary controls can switch between a classic psychedelic vibe effect or a more chorus-type effect. Holding this button down during power-up selects between mono output or stereo output, which requires a stereo jack lead. Pressing the footswitch engages or disengages the effect. The smart tap tempo feature means that the pedal recognises pressing the footswitch twice or in a short space of time and responds to the timing as a tap tempo function. Perfect for trippy arpeggios and ethereal chord work.

Power supply: 9Vdc (DC5521 connector, negative centre, adaptor not supplied)
Controls: Speed, Intensity, Volume and Vibe/Chorus switch
Dimensions: 94 x 53 x 51mm
Weight: 175g

In the box

The box for this item contains :

Voodoo Vibe pedal