All genres charts

Notes: The tools we use to compose and produce music are dear to our hearts.

Dust, liquid and accidental impact have taken many a good modular synth down over the years - this is where Decksaver steps in.

Precision designed and trimmed for a perfect fit, whilst still accommodating cables, the Eurorack Go can sit ready for operation.

This cover is designed with additional clearance for patch cables, meaning you can leave your cables in place when travelling or protecting your modular setup in the studio.

Shields delicate controls and internal components from damage at home, on the road and on stage.

Dimensions

Weight: 1.35kg
Length: 72.6cm
Width: 31.2cm
Height: 8.2cm

Notes: 7U x 104HP Gig Bag

Sized to perfectly fit the 7U x 104HP Performance Cases.

The padded main compartment protects your case from bumps and scratches

Waterproof zippers

Outer pocket for stuffing accessories and other gear (great for adding the Intellijel Pouch filled with cables and hubs)

The rear pocket closes with velcro at top but unzips at the bottom to become a handle sheath so your case can sit on top of a rolling suitcase.

Rugged strap connectors with clipped strap

Carry handles

Lightweight

Notes: After Later Audio Braided Patch Cables for Eurorack in Gold and Black. One size per pack of five cables. Packs come in 15, 30, 45, and 60 centimeters, or 6, 12, 18, and 24 inches.

Notes: After Later Audio Braided Patch Cables for Eurorack in Gold and Black. One size per pack of five cables. Packs come in 15, 30, 45, and 60 centimeters, or 6, 12, 18, and 24 inches.

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

One end of the cable has a male and female jack, the other end as just a male connector. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), and 24in (60cm).

Notes: Save space in your rack with stackable cables.

These are the newer shorter stackable Eurorack Patch Cables. Patching is more stable and makes it easier to get a lid on that performance case.

One end of the cable has a male and female jack, the other end as just a male connector. They come in sets of 5 cables.

Available in 6in (15cm), 12in (30cm), 18in (45cm), and 24in (60cm).

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 50,8 centimeters.

Patch cable with banana plugs.

Length: 50,8 centimeters

Color: Green

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: These rack screws for Eurorack can be screwed by hand for quick changes, or use a standard Phillips head screw driver.

Each Special Size M2.5 X 8mm stainless steel screw comes with a black nylon washer in a tin.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Custom ALM patch cables. Small but strong, they are designed for maximum ergonomic post modern wiggling.

- 120cm (Pack of 2 + ALM branded tie)
- Colour: Red

Notes: Tiptop Audio's revolutionary 3.5mm Stackcable is the world's first cable that combines low-noise shielded performance with the convenience of stacking banana cables. The patented Stackcable provides signal splitting directly on the back of the plug, giving you the flexibility to distribute signals without a multiple module.

Stackcables vs Multiples:

The Stackcable opens up a whole new approach to the art of synthesizer patching. Complex signal flow is more visible and easier to follow and you'll never again have to interrupt your workflow to stop, trace back, and insert a multiple. Spend more time concentrating on music making and less time on figuring how to run multiple signal paths. In addition, when comparing multiple modules vs Stackcables, the Stackcables can come out cheaper and provide you with more mult points, whenever you need them, in any configuration, without taking up any rack space in your system.

Stackcables vs Regular Patch Cables:

When comparing the Stackcables with regular patch cables, the Stackcables always keep your jacks reusable no matter how many connections are running to or from a jack. Using standard patch cables effectively "seals up" a jack once patched in, a major limitation in the dynamic workflow of a modular synthesizer. And when it comes to carrying your audio signals, the Stackcable is superior to low-cost patch cables because they are made with heavy-gauge signal conductor and signal shielding, providing both low capacitance, low impedance, and excellent noise rejection. Additionally, by providing shielding from electrical interference, the Stackcable outperforms any other signal splitter at handling audio and control signals in a professional studio environment, keeping both your studio quiet and your modular synth signals clean.

Stackcables Unique Mechanism:

The Stackcable's elegant connectors hide a complex sub-miniature electromechanical design that tightly integrates a 3.5mm plug and a 3.5mm jack together at each end of the cable, all the while handling both ground and signal. This innovative mechanism is what makes the Stackcable a reality, yet it provides an even more compact connector than a single-conductor banana cable. So if you have never experienced stack-ability, then get ready to feel how effortless, creative, and mind- altering your patching will become with these Stackcables.

Stackcables Warranty:

As of July 2017, Stackcables are manufactured in-house under full quality control, allowing Tiptop Audio to provide customers with a 2-year warranty.

Stackcables are compatible with all audio gear that uses the 3.5mm / 1/8'' jack and plug. (Do not use Stackcables with Switchcraft Tini-Jaxr brand jacks.)

Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 12.7 centimeters.

Patch cable with banana plugs.

Length: 12.7 centimeters

Color: Violet

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: Set of 5 high-quality braided & soft 3.5mm patch cables for use with eurorack modules. The braided patch cables have a soft touch & are perfect for traveling with your eurorack system patched as they are super-bendable and much less likely to get tangled even with your case lid closed. Pleasant & practical for a better patching experience.

Notes: Qu-Splitter is a 1 input to 5 output cable hub for splitting signals. These are a great alternative to mult modules as they live outside of your case and take up 0HP. Very useful for common signals like master clock, modulation sources, or even to chain multiple cables together for long reach patching!

- 1 input to 5 outputs
- 0Passive mult
- Great for common signals like master clock, and modulation sources
- Connect two cables together for long reaches
- Color: Black with white artwork

Notes: The Pod40X is 40HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod40 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: RackBrute 3U is a comprehensive Eurorack housing, transport, and protection solution. Featuring configurable positions, dependable power supply, and maximum practicality, you can be assured your precious modules will be well guarded.

Don't worry; your beloved modules are under heavy guard.

Modular gear is a precious commodity, and you need a versatile housing and security system to accommodate them. A first glance, you'll see that this is a perfectly fitted 3U, 88 HP case made of a light but strong aluminium chassis, fitted with wood side panels.

Deceptively simple, RackBrute is far more than a simple box. It includes many smart additions, such as the included +12V / -12V / +5V power supply that ensures that keeps everything up and running, and the multi-position handle system that not only lets you carry your collection with ease, but also lets you deploy an optimal operating angle, whatever your preference.

Ready for anything

Secure an unobstructed viewpoint over the theatre of operation, and hold the position 'til further orders.

In addition to keeping your modules safe and secure, RackBrute 3U gives you total control of the situation, no matter the context. The first of its secret weapons is the Link fastening system. Paired with the included handle, it will let you choose one of several configurations and orientations for your modular arsenal. Whether you want your gear stealthy and prone, or standing to attention, RackBrute is at your command.

The second trick up its sleeve is the stalwart, ever-reliable, power supply module. Including two independent circuits to supply common modular voltages, it will more than cover your need for +12V, -12V and +5V, providing up to 1600mA in total.

Thirdly, its robust power rail includes a sophisticated noise-filtering technology, and provides 20 standard slots to leave plenty of space for your collection.

Once you're powered, in position, and locked down, you'll feel like your modular rig could withstand a siege.

Joining forces with allies

Always remember the Modular Republic's motto: Unity is strength.

The Link fastening system not only equips the RackBrute 3U, but also its large-calibre sibling, RackBrute 6U as well the MiniBrute 2 and MiniBrute 2S. No matter the combination you go for, you can make the most out of your extensive module collection, or create a powerful EcoSystem with the extensive CV/Gate connectivity of the MiniBrute 2 and 2S.

It's also worth noting that although this technology comes straight from the top secret Arturia research labs, they are working for the greater good. The Link system is patent-free, so you can expect more and more Link-enhanced equipment to become available in the near future.

Do not wait for reinforcements, bring them yourself.

Let's move out

Arturia have made sure that your gear would arrive without any scratches.

When carrying precious cargo, dozens of fragile modules, a unique and irreplaceable collection, you need to be certain of their safety. With RackBrute 3U, you have nothing to fear: from the handle, all the way to the threaded nut strips, you'll find strong aluminum and steel. Wherever you go, however long your journey, however heavy your setup, RackBrute was built to last. Even transporting two RackBrutes or a RackBrute and a MiniBrute 2 is totally risk-free thanks to the built-in Spacers, eliminating any chance of collision.

If you are planning an undercover mission, the dedicated, discrete RackBrute Travel Case will keep your precious equipment free from harm.

When you need to take your show on the road, rehearse, or even just rearrange your creative space, you can depend on RackBrute.

What's in the box

Box content:

RackBrute 3U unit
Power cord
Instrument dimensions
Size : 19 x 6.6 x 3.3 inches (484 x 167 x 83mm)
Weight : 4.7 lbs. (2.1 Kg)

Main Features:

Eurorack format, 88 HP
Aluminum Chassis
Provided with a 5 HP power module
Up to 1600mA on +12V and 1600mA on -12V (2 separate circuits of 800mA)
Up to 900mA on 5V (USB + 5V modules)
Power rail with noise filtering
20 standard power slots with up to 800mA on +12V and -12V
Link system and smart handle to fasten a MiniBrute 2/2S or another RackBrute unit in various configurations
Built-in Spacers for the highest protection in transport configuration

Notes: 16-conductor ribbon cable with four 16-pin connectors (20" total length), for connecting more than 2 modules in a Pod.

Notes: 3,5mm TRS to male DIN 5

150cm length

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod32 is 32HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod32 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: 4ms blank panel - 8HP width. Black coloured PCB material with 4ms logo.

Notes: Use these black cables with the 1010music logo on either end of the jack to connect your 1010music eurorack modules to other modules that also use stereo minijack connections. This is a TRS cable with male 3.5mm minijacks on either end. It is available in two lengths: 30cm/11.75" and 60cm/23.5". These cables can be used for connections between any two 1010music modules, and to any other modules that use a compatible mapping of MIDI signals to stereo minijack connectors.

Weight: 0.04 lbs
Dimensions: 4 × 3.5 × 0.25 in
Length: 30 cm / 11.75"
Pack size: single

Notes: Three units of Befaco's Y splitter cable. Stereo jack 3.5mm plug to 2x mono jack 3.5mm sockets. Black and red colour. 10cms.

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audior that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: 3,5mm stereo jack male to 2 x 3,5mm mono jack female.

Length: 22cm

Colour: black

Notes: Tiptop Audio's revolutionary 3.5mm Stackcable is the world's first cable that combines low-noise shielded performance with the convenience of stacking banana cables. The patented Stackcable provides signal splitting directly on the back of the plug, giving you the flexibility to distribute signals without a multiple module.

Stackcables vs Multiples:

The Stackcable opens up a whole new approach to the art of synthesizer patching. Complex signal flow is more visible and easier to follow and you'll never again have to interrupt your workflow to stop, trace back, and insert a multiple. Spend more time concentrating on music making and less time on figuring how to run multiple signal paths. In addition, when comparing multiple modules vs Stackcables, the Stackcables can come out cheaper and provide you with more mult points, whenever you need them, in any configuration, without taking up any rack space in your system.

Stackcables vs Regular Patch Cables:

When comparing the Stackcables with regular patch cables, the Stackcables always keep your jacks reusable no matter how many connections are running to or from a jack. Using standard patch cables effectively "seals up" a jack once patched in, a major limitation in the dynamic workflow of a modular synthesizer. And when it comes to carrying your audio signals, the Stackcable is superior to low-cost patch cables because they are made with heavy-gauge signal conductor and signal shielding, providing both low capacitance, low impedance, and excellent noise rejection. Additionally, by providing shielding from electrical interference, the Stackcable outperforms any other signal splitter at handling audio and control signals in a professional studio environment, keeping both your studio quiet and your modular synth signals clean.

Stackcables Unique Mechanism:

The Stackcable's elegant connectors hide a complex sub-miniature electromechanical design that tightly integrates a 3.5mm plug and a 3.5mm jack together at each end of the cable, all the while handling both ground and signal. This innovative mechanism is what makes the Stackcable a reality, yet it provides an even more compact connector than a single-conductor banana cable. So if you have never experienced stack-ability, then get ready to feel how effortless, creative, and mind- altering your patching will become with these Stackcables.

Stackcables Warranty:

As of July 2017, Stackcables are manufactured in-house under full quality control, allowing Tiptop Audio to provide customers with a 2-year warranty.

Stackcables are compatible with all audio gear that uses the 3.5mm / 1/8'' jack and plug. (Do not use Stackcables with Switchcraft Tini-Jaxr brand jacks.)

Notes: The Dual Mantis Studio Brackets pair lets you connect two Mantis together in a robust and elegant solution. This setup is fixed and is recommend mainly for studio use. The brackets are cut precisely by laser from a sturdy metal and then coated twice for a nice smooth finish that matches the Mantis light gray color. They come with sixteen screws and special washers that help hold the screw in place during assembly and keep a tiny gap between the brackets and the Mantis. Installation is fairly simple and takes about 30 minutes to complete.

Using the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your Mantis and watch your studio setup grow...

Before you begin:
Please get a Phillips head screw driver. It is also recommended to have eight eurorack modules available to help align the Z-Rails but this is not mandatory.

The kit contains:
2 x Brackets, left and right
2 x Adhesive foam strips
12 x Phillips pan head machine screws
12 x Nylon washers
1 x Allen Wrench 3mm

Notes: Banana Shorting Bar for synthesizers and modular systems made by Buchla.

Shorting Bar with banana plugs. The color may vary.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: 4U x 104HP Gig Bag (For Palette)

Clearance to leave your system patched and with a Palette 104 Decksaver Lid attached

Padded main compartment protects your case from bumps and scratches

Waterproof zippers

Zipped outer pocket for stuffing accessories and other gear

The rear pocket closes with velcro at the top but unzips at the bottom to become a handle sheath so your case can sit on top of a rolling suitcase.

Super beefy strap connectors with clipped strap

Padded Handle

Lightweight

Notes: Custom wrench for 3.5mm jacks, designed for Bananuts or other slotted round 3.5mm nuts.

Notes: The Pod48X is 48HP with 2.00" (51mm) of available module depth. The built-in power supply has four power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod48X includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Low-cost, portable, compact enclosure that turns Eurorack modules into table-top instruments.

The Pod20 is 20HP with 1.34" (34mm) of available module depth. The built-in power supply has two power connectors and can be daisy-chained to other Pods. More power connectors can be added with the Multi Power Cable accessory.

Pods require a power brick. If you already have a powered Pod and power brick (or a Row Power module) you can use a barrel cable to daisy-chain powered Pods.

The Pod20 includes ten (10) M3x8mm stainless steel screws and is compatible with M3 Knurlies.

Notes: Unique custom design 3.5mm patch cables.

They feature strong, ergonomic barrels which are slim and stubby for max patchability.

Available in various lengths (15, 30, 60, 90 & 120cm) and colours.

Longer 60, 90 & 120 lengths also include ALM cable tie.

Notes: The 3-Tier Mantis Studio Brackets pair lets you connect three Mantis together in a robust and elegant solution. This setup is fixed and is recommended mainly for studio use. The brackets are cut precisely by laser from a sturdy metal and then coated twice for a nice smooth finish that matches the Mantis light gray color. They come with twenty screws and special washers that help hold the screw in place during assembly and keep a tiny gap between the brackets and the Mantis. Installation is fairly simple and takes about 30 minutes to complete.

Notes: This is a pack of five, 12" skinny patch cable for Eurorack. Colour is green.

Notes: These are right angle patch cables for Eurorack. Colour is blue, pack of 5 cables.

Notes: Standard Eurorack power cable.

Use the 10-16 variant for most modules. 16-16 is for modules that use the internal +5V rail.

Length: 25CM (9.8")

Notes: ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.

The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.

These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.

Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.

Great modern cases

The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.

A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.

The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.

Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.

6U / 52 HP

Provides up to 1 Amp power on each -12V & +12V rails.
Connections for up to 9 modules on busboard, with additional 'flying bus board' included that adds up to 12 connectors.
Includes 2 Amp power 'brick'

Notes: Nazca Noodles is a cable brand developed in partnership between Pittsburgh Modular Synthesizers and Cre8audio that's purpose is to provide a luxurious patching experience for electronic music creators.

Described by Cre8audio as "Bright and happy to monotonous monochrome," Nazca Noodles will be initially available as 3.5mm TS to 3.5mm TS "eurorack style" patch cables. They are available in six different colours and seven sizes per colour. A total of forty-two cable SKUs are available at launch.

Nazca Noodles were previously sold by Pittsburgh Modular but were discontinued so that they completely revamp the line to dramatically expand the offerings.

Talking about Nazca Noodles, the Pittsburgh team said, "people like these Noodles because of their super slimline jack ends. They are great for tight patch points. Plus, their soft cable jackets make them floppier and easier to work with than your typical patch cable. Before we partnered with Cre8audio, people kept requesting them in multiple colours and sizes. We didn't really have the resources nor did we really want to manage a 42+ product cable line. But for some reason Cre8audio does.... They're pretty weird (and seem to really like these cables)".

Nazca Noodles Specifications and other info

All current Nazca Noodles products feature the following:
3.5mm TS to 3.5mm TS connectors
Specially designed slimline over-molding jack ends - perfect for squeezing into tight patch points
Super soft and floppy cable jacketing for patching pleasure
Initial colours available - Black, White, Very Violet, Hot Pink, Groovy Green, and Baby Blue,
All colours are available in the following sizes 15cm, 25cm, 50cm, 75cm, 100cm, 150cm, and 300cm
All come in packs of five cables per colour, except 300cm which comes in packs of 2 cables

Nazca noodles are available now from Cre8audio.com, Pittsburghmodular.com, and Cre8audio dealers worldwide. To see more pictures, check out videos, find a list of dealers, and to just learn more, please visit Nazcanoodles.com

Nazca Noodles is a trademark of Pittsburgh Modular Synthesizers llc. - 2022.

Notes: Tiptop Audio's revolutionary 3.5mm Stackcable is the world's first cable that combines low-noise shielded performance with the convenience of stacking banana cables. The patented Stackcable provides signal splitting directly on the back of the plug, giving you the flexibility to distribute signals without a multiple module.

Stackcables vs Multiples:

The Stackcable opens up a whole new approach to the art of synthesizer patching. Complex signal flow is more visible and easier to follow and you'll never again have to interrupt your workflow to stop, trace back, and insert a multiple. Spend more time concentrating on music making and less time on figuring how to run multiple signal paths. In addition, when comparing multiple modules vs Stackcables, the Stackcables can come out cheaper and provide you with more mult points, whenever you need them, in any configuration, without taking up any rack space in your system.

Stackcables vs Regular Patch Cables:

When comparing the Stackcables with regular patch cables, the Stackcables always keep your jacks reusable no matter how many connections are running to or from a jack. Using standard patch cables effectively "seals up" a jack once patched in, a major limitation in the dynamic workflow of a modular synthesizer. And when it comes to carrying your audio signals, the Stackcable is superior to low-cost patch cables because they are made with heavy-gauge signal conductor and signal shielding, providing both low capacitance, low impedance, and excellent noise rejection. Additionally, by providing shielding from electrical interference, the Stackcable outperforms any other signal splitter at handling audio and control signals in a professional studio environment, keeping both your studio quiet and your modular synth signals clean.

Stackcables Unique Mechanism:

The Stackcable's elegant connectors hide a complex sub-miniature electromechanical design that tightly integrates a 3.5mm plug and a 3.5mm jack together at each end of the cable, all the while handling both ground and signal. This innovative mechanism is what makes the Stackcable a reality, yet it provides an even more compact connector than a single-conductor banana cable. So if you have never experienced stack-ability, then get ready to feel how effortless, creative, and mind- altering your patching will become with these Stackcables.

Stackcables Warranty:

As of July 2017, Stackcables are manufactured in-house under full quality control, allowing Tiptop Audio to provide customers with a 2-year warranty.

Stackcables are compatible with all audio gear that uses the 3.5mm / 1/8'' jack and plug. (Do not use Stackcables with Switchcraft Tini-Jaxr brand jacks.)

Notes: Tiptop Audio's revolutionary 3.5mm Stackcable is the world's first cable that combines low-noise shielded performance with the convenience of stacking banana cables. The patented Stackcable provides signal splitting directly on the back of the plug, giving you the flexibility to distribute signals without a multiple module.

Stackcables vs Multiples:

The Stackcable opens up a whole new approach to the art of synthesizer patching. Complex signal flow is more visible and easier to follow and you'll never again have to interrupt your workflow to stop, trace back, and insert a multiple. Spend more time concentrating on music making and less time on figuring how to run multiple signal paths. In addition, when comparing multiple modules vs Stackcables, the Stackcables can come out cheaper and provide you with more mult points, whenever you need them, in any configuration, without taking up any rack space in your system.

Stackcables vs Regular Patch Cables:

When comparing the Stackcables with regular patch cables, the Stackcables always keep your jacks reusable no matter how many connections are running to or from a jack. Using standard patch cables effectively "seals up" a jack once patched in, a major limitation in the dynamic workflow of a modular synthesizer. And when it comes to carrying your audio signals, the Stackcable is superior to low-cost patch cables because they are made with heavy-gauge signal conductor and signal shielding, providing both low capacitance, low impedance, and excellent noise rejection. Additionally, by providing shielding from electrical interference, the Stackcable outperforms any other signal splitter at handling audio and control signals in a professional studio environment, keeping both your studio quiet and your modular synth signals clean.

Stackcables Unique Mechanism:

The Stackcable's elegant connectors hide a complex sub-miniature electromechanical design that tightly integrates a 3.5mm plug and a 3.5mm jack together at each end of the cable, all the while handling both ground and signal. This innovative mechanism is what makes the Stackcable a reality, yet it provides an even more compact connector than a single-conductor banana cable. So if you have never experienced stack-ability, then get ready to feel how effortless, creative, and mind- altering your patching will become with these Stackcables.

Stackcables Warranty:

As of July 2017, Stackcables are manufactured in-house under full quality control, allowing Tiptop Audio to provide customers with a 2-year warranty.

Stackcables are compatible with all audio gear that uses the 3.5mm / 1/8'' jack and plug. (Do not use Stackcables with Switchcraft Tini-Jaxr brand jacks.)

Notes: Black Market Modular's patch cords are characterized not only by beautiful colours but also their only 8mm wide and 25mm high plug. Thereby they are adequate for dense patches and they also fit really well into Stackcables. The cable is flexible yet not wishy-washy but also not too stiff - just perfect! They ship coiled and not twisted so you don't get that permanent kink.

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: A high-quality, custom Eurorack patch cable and bundled them in handy packs of four (4).

Instead of rainbow packs, each colour will be linked to a specific size, offering extra convenience for patching and sorting cable lengths.

Each pack of four comes with a custom velcro cable tie and is attached to a cardboard display hangar, in an effort to reduce plastic packaging where possible.

Notes: Banana cable for modular systems, as used by companies such as Buchla. The length is 101,6 centimeters.

Patch cable with banana plugs.

Length: 101,6 centimeters

Color: Violet