All genres charts

Notes: This is a variant of the standard red/black racks for AE modular with wooden front and sides.

Same as with the standard cases, via a joint kit (not included) another case of this width (either one-row or two-row, standard or wooden type) can be attached at a free angle; the bus is connected via a short connector cable between both cases.

The sides, front and back are made of real-wood veneer covered MDF.

Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:

Connect the case to your system via the Hinge Kit 1 or 2 (only for cases newer than 2019)
Connect the case to your system via the Racklink Module (works for all cases)
Install the Master Module
Install the Power Module

Whichever option you decide on, you will also need to order and install 2x Bus Cables, but be careful to order the correct size! Standard Bus Cable for Standard Case size, etc.

Notes: The 1-row QUICKSWAP CASE for AE Modular is the high-end case for AE Modular. It is based on a sturdy metal chassis with a beautiful matte black powder coating and - allows to plug in AE modules without any screws, which is a key feature of this case! The design makes sure that the modules sit firmly inside the case and the bus connection is established automatically by the integrated bus board, so need for the separate bus cable known from the standard AE cases. Rearranging your modular system can't be easier!

This case is developed by Kyaa, a 3rd party AE module developer; Tangible Waves is producing the case.

With a connector kit, another QUICKSWAP CASE of same width can be attached at certain angles, depending on the connector - and the power supply is linked between the cases, also via the connector.

Other utilities, like a handle for carrying a folded case, are coming soon.

Please note: This rack does not include the Master or Power module.

To connect the case to power you have the following options:

Install the Master Module
Install the Power Module
Connect to another, already powered QUICKSWAP CASE
Connect to another AE case via the RACKLINK module kit

*** Please note: the modules are not included, they are shown for demonstration purposes only. ***

Notes: The 1-row QUICKSWAP CASE for AE modular is the high-end case for AE modular. It is based on a sturdy metal chassis with a beautiful matte black powder coating and - the key feature of this case - allows to plug in AE modules without any screws! The design makes sure that the modules sit really firm in the case and the bus connection is established automatically by the integrated bus board, so need for the separate bus cable known from the standard AE cases. This means, rearranging your modular system can't be easier!

This case is developed by Kyaa, a great 3rd party AE module developer; tangible waves is producing the case. We are happy about this great cooperation and this marvellous addition to our product range!

With a connector kit, another QUICKSWAP CASE of same width can be attached at certain angles, depending on the connector - and the power supply is linked between the cases also via the connector.

Other utilities, like a handle for carrying a folded case, are coming soon.


Please note: This rack does not include the Master or Power module. To connect the case to power you have the following options:
Install the Master Module
Install the Power Module
Connect to another, already powered QUICKSWAP CASE
Connect to another AE case via the RACKLINK module kit

Notes: The uCASE is designed to hold AE micro modules of 1/3 size. It is available in the same widths like the other AE cases (12, 16, 20 units). It contains sockets for uModules over the whole width, so no need for extra carriers for the uModules. The uModules can be plugged in and removed easily, even with the AE system running, so you can reconfigure or add needed functions in form of micro modules "on the fly".

The bus connection to the parent case is made with a short ribbon cable, so the uCASE gets it's power supply plus other bus lines from there.

The functionality is basically the same as the uBASE module; here, to groups of four uModules the bus lines lie CV, GATE, MIDI clock etc. can be assigned individually (not used by the currently available uModules, but will become relevant for future uModules).

Included is a small "key" to lift also modules without knobs in an easy way.

Notes: Protect the faders on your favorite modules while making them more comfortable to use at the same time!

Perfect size for modules like the WMD Performance Mixer, Malekko Voltage Block, STG Graphic Sequencer, TTSH, Roland JU-06, and more. Custom sized to fit faders snug and clear in color so you can still see the LED indicator. The WMD clear fader cap is a must have for any module with plastic faders.

Notes: Protect the faders on your favorite modules while making them more comfortable to use at the same time!

Perfect size for modules like the WMD Performance Mixer, Malekko Voltage Block, STG Graphic Sequencer, TTSH, Roland JU-06, and more. Custom sized to fit faders snug and clear in color so you can still see the LED indicator. The WMD clear fader cap is a must have for any module with plastic faders.

Notes: ***B-STOCK: Box opened, product in perfect working order***


This is the powered version that includes the case as described here, a Strom+ module, a Strom power supply (AC/DC adapter) and a Strom busboard with connector cable. You only need to plug modules into the case and you’re ready to go!

One case fits 84HP of modules with a depth of 70mm.

The cases can be used with an incredible amount of flexibility to swap in an out full rows and create larger setups using the Case Connectors and Case Standoffs.

The side cheeks are made of high-quality Finnish plywood and are coated with a durable transparent melamine film. The black surface is hardwearing and crack resistant as well as easy to clean.

All cases are shipped with a set of 4 rubber feet and 50 x M3 screws.

Notes: Rep your Modbap love with style with these 2 new shirt designs from Modbap Modular! Both shirts feature premium Gildan 100% cotton black t-shirt with large screen printed Modbap logo (either the classic Square logo or the new Inception logo) and woven logo hem tag. Each shirt comes with a wide range of sizes to choose from, from small to triple XL. From long sessions in the studio to live performances, Modbap shirts will keep you comfortable and styled no matter the situation.

Notes: Rep your Modbap love with style with these 2 new shirt designs from Modbap Modular! Both shirts feature premium Gildan 100% cotton black t-shirt with large screen printed Modbap logo (either the classic Square logo or the new Inception logo) and woven logo hem tag. Each shirt comes with a wide range of sizes to choose from, from small to triple XL. From long sessions in the studio to live performances, Modbap shirts will keep you comfortable and styled no matter the situation.

Notes: Rep your Modbap love with style with these 2 new shirt designs from Modbap Modular! Both shirts feature premium Gildan 100% cotton black t-shirt with large screen printed Modbap logo (either the classic Square logo or the new Inception logo) and woven logo hem tag. Each shirt comes with a wide range of sizes to choose from, from small to triple XL. From long sessions in the studio to live performances, Modbap shirts will keep you comfortable and styled no matter the situation.

Notes: 2mm thick aluminium panel, in bath-anodized finish, with high-quality light-grey printing.

Notes: 2mm thick aluminium panel, in bath-anodized finish, with high-quality light-grey printing.

Notes: 2mm thick aluminium panel, in bath-anodized finish, with high-quality light-grey printing.

Notes: 2mm thick aluminium panel, in bath-anodized finish, with high-quality light-grey printing.

Notes: 2mm thick aluminium panel, in bath-anodized finish, with high-quality light-grey printing.

Notes: ***B-STOCK: Box opened, product in perfect working order***


This AC Power Adapter comes with a locking DC extension cable. The connector of the DC extension cable screws down to the DC jack, preventing noise interference when the cable is bumped.

There are two voltage options:
12V: used with original 5A Power Supply and newer Five Amp Power.
19V: used with Deluxe Power, Super Power, Case Power Mini and Case Power.
Note: If you are replacing a power brick on a Synthrotek power supply, use the same voltage as was originally sent (unless the brick is 15V, then change to it to 19V).

AC input: 100-240V, 1.6A, 50-60Hz

DC output:
12V at 5A
19V at 4.74A

Center positive 2.1mm pin

Comes with a 3-prong power cable, which will work in the US and some other countries. If you are in Europe, etc. you can get a separate volex connector that will work in your country. We don't carry international connecting cables, but you can find them easily on the web.

Notes: EcoSynth is a small, portable Eurorack modular case solution, designed for your desktop! It's a practical solution designed to save your hard-earned cash for modules. If you're looking for a small desktop solution to augment other desktop electronic hardware, this is for you. If you need a larger case, EcoSkiff passes on the savings for more traditional size racks like 84HP and 104HP.

Save on money and space: get just as much HP as you need!

Available in the following sizes:
24HP
44HP
64HP
84HP
104HP

Features and specifications:

Over-current protection: shuts off each power rail automatically if modules use too much current on that rail
The skiff goes together with just a Phillips head screwdriver!
Comes with 3mm slide nuts
Max module depth: 44mm
Max module depth above power supply: 33mm

Specifications, 64HP-104HP:
Power output:
+12V @ 2A
-12V @750mA
5V@ 1.5A
Power connectors: 15
Daisy chains to another EcoSkiff, Skiff Power, Five Amp Power, or Schottkey DC

Requires a 12V 5A center positive power brick with a 5.5mm x 2.1mm tip.
Assembly required, but no soldering needed.

Notes: EcoSynth is a small, portable Eurorack modular case solution, designed for your desktop! It's a practical solution designed to save your hard-earned cash for modules. If you're looking for a small desktop solution to augment other desktop electronic hardware, this is for you. If you need a larger case, EcoSkiff passes on the savings for more traditional size racks like 84HP and 104HP.

Save on money and space: get just as much HP as you need!

Available in the following sizes:
24HP
44HP
64HP
84HP
104HP

Features and specifications:

Over-current protection: shuts off each power rail automatically if modules use too much current on that rail
The skiff goes together with just a Phillips head screwdriver!
Comes with 3mm slide nuts
Max module depth: 44mm
Max module depth above power supply: 33mm

Specifications, 24HP-44HP:
Power output:
+12V @ 1A
-12V @300mA
5V@ 150mA
Power connectors: 2 (plus optional flying bus cable)

Specifications, 64HP-104HP:
Power output:
+12V @ 2A
-12V @750mA
5V@ 1.5A
Power connectors: 15
Daisy chains to another EcoSkiff, Skiff Power, Five Amp Power, or Schottkey DC

Requires a 12V 5A center positive power brick with a 5.5mm x 2.1mm tip.
Assembly required, but no soldering needed.

Notes: EcoSynth is a small, portable Eurorack modular case solution, designed for your desktop! It's a practical solution designed to save your hard-earned cash for modules. If you're looking for a small desktop solution to augment other desktop electronic hardware, this is for you. If you need a larger case, EcoSkiff passes on the savings for more traditional size racks like 84HP and 104HP.

Save on money and space: get just as much HP as you need!

Available in the following sizes:
24HP
44HP
64HP
84HP
104HP

Features and specifications:

Over-current protection: shuts off each power rail automatically if modules use too much current on that rail
The skiff goes together with just a Phillips head screwdriver!
Comes with 3mm slide nuts
Max module depth: 44mm
Max module depth above power supply: 33mm

Specifications, 24HP-44HP:
Power output:
+12V @ 1A
-12V @300mA
5V@ 150mA
Power connectors: 2 (plus optional flying bus cable)

Specifications, 64HP-104HP:
Power output:
+12V @ 2A
-12V @750mA
5V@ 1.5A
Power connectors: 15
Daisy chains to another EcoSkiff, Skiff Power, Five Amp Power, or Schottkey DC

Requires a 12V 5A center positive power brick with a 5.5mm x 2.1mm tip.
Assembly required, but no soldering needed.

Notes: LOCI Accessory

A great addition to any LOCI modular stand.
Assembled in seconds
Includes 2 half shelves that can be connected in a number of ways
The accessory comes with 2 mini wings that can also act as stabilisers for larger items
Includes 2 hook and loop cable ties which can also be used to strap stands together when in back to back formation
Super strong Eurorack or synth stand
Precision laser cut from 6mm oak veneer
Beautifully detailed
Non-slip bands
Packs flat to slide in your case

Please note: This product is an accessory. It is not and does not include a desktop stand.

Notes: ***B-STOCK: Box opened, product in perfect working order***


***POWER SET FOR EU AND AUSTRALIA 220-230V:
The Pittsburgh Modular Structure 208 and Structure 360 eurorack enclosures use a switching power supply that needs manually set to the correct AC input voltage. The internal switch has already be properly set for 220-230 VAC. This setting works for the EU and Australia or other countries that use 220-230 VAC power.
For use in countries that use 100-120 VAC power, such as North America and Japan, the switch inside the case on the AC/DC regulator needs to be switched to the left. The switch is marked with a Yellow sticker printed with "AC input voltage can be selected by switch. Check input voltage avoiding damage before power on." The switch is located on the side of the enclosure below the arrow.
Please contact Pittsburgh Modular with any questions. [email protected]***

Structure EP-208 Eurorack Enclosure -

Maximum Power for a New Generation



Beautifully stained hardwood double row, 208hp powered eurorack travel case with lid. Includes professional, heavy duty, internal power supply designed to exceed the needs of the most demanding analog and digital eurorack systems.




Everything is New:

With years of research and two case lines under our belt, we decided to start over and produce a line of cases for the next generation of eurorack synthesizers. The eurorack modular ecosystem is expanding faster than ever and manufacturers are constantly pushing eurorack cases and power supplies to the limits. What started as a power supply designed to drive primarily analog synthesizers has transformed into a supply that needs to simultaneously meet the unique demands of sensitive analog circuitry, power hungry digital processors, and ground sensitive user interface modules.

We started with what matters most. Clean power. A lot of it. Up to 3x the amount of clean power available in cases from other brands. Next we turned our focus to the enclosure itself and there was only one goal. Make the case stronger. Our engineers tested countless combinations utilizing different types of wood, joints, adhesives, assembly techniques, and hardware to ensure that Structure cases are as durable as they are beautiful.

With a clean and gorgeous design that promotes creative exploration, the Structure enclosures are our most robust and refined case line yet. With massive amounts of both room and clean power, you can reach completely new heights in your creative performances.




Features:

Structure EP-208 Power:
4 Amps of Clean +12v Power

3 Amps of Clean -12v Power

2 Amps of Clean +5v Power

Custom Powered Bus Board with 15 Keyed Eurorack Power Headers Per Row, 30 Power Headers Total

External On-off Rocker Power Switch with LED

Universal IEC Power Connector Works Anywhere



Structure EP-208 Enclosure
:
Hardwood and Steel Construction (No cheap plastic here)

Dual 104hp Rows

Removable Lid

Lid Fits Over Fully Patched System (No need to remove patch cables)

Edge to Edge Rail Design Reduces Gaps Between Modules and the Side of the Case

20 Smooth Sliding Square Nuts Per Rail (Holds up to 40 modules)

Beautifully Hand-Stained Hardwood

Matching Black Steel Hardware Set


Structure EP-208

Dimensions
:
External Depth with lid:9 1/4"
External Depth without Lid: 5 1/2"
External Height: 12 1/4"
External Width: 22"
Internal Depth Above Power Supply: 2 3/4"
Internal Depth Above Bus Board: 3 3/4"
Internal Depth Above Nothing: 4 1/4"

Notes: This is 40 cm (15.7 inch) long cable for connecting the DROID controllers controllers to your master. Its main purpose is to separate the controllers from the master at a longer distance.

You also can use this cable for connecting two of Der Mann Mit Der Maschine's multiples into a CV bus.

Notes: The tiny but mighty Eurorack power supply. Winterbloom's love letter to DIYers is perfect for custom cases.

Micronova is a miniature 100x30mm power supply with a big soul. It can provide up to 18W of power for your modules and multiple units can be easily daisy chained to power larger systems.

Despite being adorably small, Micronova provides lots of flexibility for custom case builds. It can be powered through an attached DC barrel jack, screw terminals, or through an optional front entry panel.

Micronova is equipped with two Eurorack power headers that can be expanded using a busboard or flying bus cable.

Micronova also has critical safety features including reverse polarity protection, a resettable polyfuse, and over-current shutdown.

A suitable AC-DC power adapter is required.

A tiny 100mm x 30mm board with M3 mounting holes
Provides +12V @ 1A, -12V @ 300mA, and +5V @ 500mA
Includes two 16-pin Eurorack power headers
Requires a 15V to 20V center positive DC power supply
Multiple units can be daisy chained
Reverse-polarity, over-current, and over-temperature protection

Notes: It's always nice to have some extra power cables handy. Omnitone's standard modular power cables come in a pack of 5. Each power cable is 26cm (~10 inches) long.

Notes: Introducing the n-1 case, a sleek, thoughtfully designed Eurorack modular case for sound and music makers. Our flat-packable case interlocks and slides together, requiring no tools to assemble. Later in the year, we will be launching a range of accessories that will provide further versatility to the n-1 case. These add-ons will allow you to customize your case to suit your unique preferences, ensuring it remains an adaptable companion on your evolving musical journey.

What's in the box?
12mm plywood frame
3mm plywood back
4 dowel pins
1 pair of aluminum rails
M5 hex socket screws
M3 rail slide nuts
mystery stickers!
*case is unpowered, giving users the freedom to choose a panel-mounted power supply or adapt an internal power option.

Notes: Bocuma's own line of patch cables. Pack of 5 high quality cables, 3.5mm.

Available in packs of gray or black.

Each package includes:

2x 30cm
2x 60cm
1x 90cm

A good system requires a diet rich in NUDOLS: Organic Patch Cables.

Notes: Bocuma's own line of patch cables. Pack of 5 high quality cables, 3.5mm.

Available in packs of gray or black.

Each package includes:

2x 30cm
2x 60cm
1x 90cm

A good system requires a diet rich in NUDOLS: Organic Patch Cables.