Eowave

Notes: Desktop Eurorack moduile case 3U - 104HP with power supply on the left side.

Plexiglas side panels 5mm thick.

Aluminium chassis.

6cm deep, but only 4cm deep all along the 5HP of the power supply. Check your modules before!

Tech specs:
- Width : 104HP
- Depth : 6cm
- Depth all along the 5HP of the power supply : 4cm
- Current Consumption : +12V : 2.4A ; -12V : 1.2A ; +5V : 0.5A

Notes: Desktop Eurorack moduile case 3U - 84HP with power supply on the left side.

Plexiglas side panels 5mm thick.

Aluminium chassis.

6cm deep, but only 4cm deep all along the 5HP of the power supply. Check your modules before!

Tech specs:
- Width : 84HP
- Depth : 6cm
- Depth all along the 5HP of the power supply : 4cm
- Current Consumption : +12V : 2.4A ; -12V : 1.2A ; +5V : 0.5A

Notes: Eowave's cases are finished by hand in raw multi-ply, the nature of this means you may find slight blemishes. The intention is that you apply your own custom finish, if you feel that you want to. Simply remove the m5 screws with an size 3 allen key and then you can sand, paint, varnish or oil the surface of the wood.

Tech Specs

- 6U in 104HP
- 6cm Deep
- With/without power
- 4A supply included

Notes: Eowave's cases are finished by hand in raw multi-ply, the nature of this means you may find slight blemishes. The intention is that you apply your own custom finish, if you feel that you want to. Simply remove the m5 screws with an size 3 allen key and then you can sand, paint, varnish or oil the surface of the wood.

Tech Specs

- 6U in 104HP
- 6cm Deep
- With/without power
- 4A supply included

Notes: Eowave Studio Cases are made of metal, with wooden side panels to give them a modern look. The case here is angled, and features two rows with 84 HP each. A power supply and Bus Boards are built-in.

Notes: The Domino is a redesign of its desktop synth bigger brother. Packing a full-featured synthesizer voice into 10HP, the Domino includes a saw/square wave oscillator, ladder type low pass filter, decay envelope and VCA. A plethora of patching possibilities makes this module a keen choice for portable systems, and those looking for deep sonic crafting within a tight HP space. Pair with a sequencer for instant basslines and acid lead lines, add some modulation to unlock the full sound design potential

Controls:
- Cutoff - filter frequency
- Res - filter resonance
- Switch - switches between gate>VCA to envelope>VCA
- Pitch - pitch tuning
- Mix - blend saw and square waves
- P Mod - pitch modulation attenuator
- Decay - envelope decay
- Filter Envelope - modulation amount, pre-patched from envelope to filter
- F Mod - filter cutoff modulation attenuator

In:
- CV
- VCA
- PWM (square wave)
- Mix 1 in - input for external oscillator/sound source to replace saw wave
- Gate - gate in
- P Mod - pitch modulation, pre-patched to envelope
- F Mod - frequency modulation for filter cutoff, pre-patched to CV in
- Mix 2 in - input for external oscillator/sound source to replace square wave

Out:
- Saw
- Square
- Env - envelope output
- Out - out from VCA

Notes: The classical Eowave synth voice has a new skin matching with the new product line.

The Domino is an analogue all-in-one synth voice with saw/square wave oscillator, ladder type low pass filter, envelope and VCA - it is designed for pure beefiness and grunt in the low end department. It excels at basslines, acid, kicks and low throbbing drones.

The core of the module is a dual waveforms oscillator with saw and square. The pulse width of the square can be modulated with the PWM input.

The pitch knob over a range is of 1 octave, designed to be used primarily in lower ranges. The CV input control the oscillator pitch in v/oct but is also normalised to the f Mod input. When the f mod potentiometer is fully open, the filter can be controlled in v/oct. Since the filter as self-oscillation capabilities, you can also use it as an oscillator.

The decay envelope is controlling the filter cutoff and is normalized to the oscillator pitch input.

The Domino provides two envelopes control options with its gate>VCA and envelope>VCA switch, allowing you to choose between using a gate signal or the decay envelope to shape the VCA response.

The Mix knob enables blending between the saw and square waves. Connect external sound sources to the Mix 1 and Mix 2 inputs to replace the saw wave and square wave, respectively.

This module also provides the dry oscillator waveforms output as well as the envelope output.

Main features:
Fully analogue synth voice
Dual waveform oscillator with control over the pulse width
Ladder filter with v/oct tracking and self oscillation
VCA
Decay envelope responsive to the amplitude of the gate
External inputs going thru the filter/VCA signal patch

Some applications:
Bass synth voice
Envelope generator
External source mixer
Kick drum

Technical details:

Fully Analogue design
10hp
Reverse power protection

Notes: In our project Orage Magnetique to recreate a sound spaciolab to recreate sounds from space , this quad multimode filter has been designed to simulate the action of magnetic fluctuations on the sound landscape. The effecs of ionisation variations are modified by the different filters cutoff frequencies and the way they are synced. The module Fluctuations magnetiques (magnetic fluctuation) is a module from the modular synthesizer Orage Magnetique. This quad mutimode filter combines 4 independent multi-mode filters with selectable low-pass, band-pass & hi-pass. Each filter can be synced to one another to build to a 48dB low-pass/hi-pass filter or 24dB band-pass. Each filter has an modulation input and an individual output to create stereo effects a well as quadriphonic textures. The filters A & B and C & D can be used in parallel mode or serial mode.

Notes: The Ribbon MK2 is a tactile instrument which is sensitive to position and pressure. At the same time a 12 -bit synth and a USB and CV/Gate controller, it can be used in many different ways - as a solo instrument, to control virtual instruments and iOS or to control analog/modular systems and CV/gate devices. The Ribbon comes with a software editor, which allows you to choose from 9 oscillator sources, LFO and FM modulation and delay and downsampling effects. 16 Presets can be stored and recalled on the fly using the two buttons on the Ribbon.

Notes: Six-voice (or three stereo channel) mixer in a small format, the Supamix takes a straightforward but highly effective approach. Swap functions allow for creative approaches to mutes, randomisation and sequencing.

Supplier's Notes:
A compact stereo line mixer created with live performance and space optimisation in mind. This 6-channel stereo mixer has a fully analogue audio path with 2 VCAs per channel controlled by fines tuned analogue envelopes to minimise mute clicks. It also embeds a unique mute swap function with 6 modes allowing you to automate muting.

Supamix is a compact stereo line mixer designed for live performances and space optimization.
This 6-channel stereo mixer features a fully analogue audio path with 2 VCAs per channel and finely
tuned analogue envelopes for vactrol-like muting control minimizing mute clicks.

Supamix also includes a unique mute swap function with six modes, offering versatile
mute automation possibilities.

The mixer is designed with a variety of input options to accommodate different needs while
being compact:

- Inputs 1/2 have manual pan controls for placing static sounds within the mix.
- Inputs 3/4 have CV pan controls to moving sound sources in the stereo field
- Inputs 5/6 are stereo, making it easy to mix modules with stereo outputs (right input is normalized to the left) to mix the growing catalogue of stereo modules.

A header on the back allow you to use the L output as a TRS stereo output. Another header is here to link the Supamix with the O phone/line module.

The Swap functions on the modules are both useful for transitioning between sound scenes or creative applications. To change the swap modes on Supamix, press the Shift button and one of the mutes. If you press the Swap button, it will activate the swap manually. The following are the swap modes available.

1 -> Scene change gate : Reverse the mutes states when a gate is high
2 -> Scene change trig : reverse the mutes state when trigged (or if the swap button is pushed)
3 -> Binary counter : CV input between 0 and 5v will correspond to a 6 bit binary counter. At 0v mutes will be all oo, 5v will be all open. And it will count as follow :100000 010000 110000.....
4 -> Randomizer: Trigg to randomize the mutes. You can change the probability of having the mutes on by using a trigger between 2 and 5v.
5 -> Sequencer: Trig to go one step further. It reverse the current step mute state.
6 -> State rotation: Rotate the mute state 0v there isn't rotation, 5v is a full cycle rotation. This shift the mutes state (last one goes to first one)

Main features:

6 voice mixer
Manual pan on 1/2
CV pan on 3/4
Stereo inputs on 5/6
Unique mute swap functions
Linkable to the O output module

Some applications:

Compact case line mixer
Creative mute switching/sequencing
Feedback R out to one of the cv pan input to cv control feedback distortion

Technical details:

10 hp
Fully Analogue signal patch with 12VCAs with envelopes on each.
Skii friendly
Reverse power protection