100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Two Weeks: Studio Equipment

View:
Options
Items 1 to 21 of 21 on page 1 of 1
Cat: 732828 Rel: 07 Jun 19
 
Trigger expander for the Nerdseq sequencer - silver
Notes: The More Triggers 16 is a trigger expander for the Nerdseq sequencer. Adds 16 more Trigger/Gate outputs to the NerdSEQ.
Read more
 1 in stock $158.45
Click for better price!
quote 732828
Cat: 732829 Rel: 07 Jun 19
 
Trigger expander for the Nerdseq sequencer - black
Notes: The More Triggers 16 is a trigger expander for the Nerdseq sequencer. Adds 16 more Trigger/Gate outputs to the NerdSEQ.
Read more
 2 in stock $158.45
Click for better price!
quote 732829
Cat: 719647 Rel: 10 Jun 19
 
Modular synthesiser starter rack
Notes: A complete AE modular system in a two-row Rack (32 AE module units in complete); containing the following modules:

- MASTER
- 2OSC/D
- VCO
- NOISE
- 2 x LFO
- FILTER (Wasp type)
- SVFILTER
- 2ENV
- 2VCA
- LOGIC
- SAMPLE&HOLD
- BEATDIVIDER
- TRIQ164
- 2ATT/CV
- MIXER
- DELAY

The case is extendable; via a joint kit (not included) another case of this type can be attached at a free angle; the bus is connected via a short connector cable.

It is shipped complete with power supply unit, MIDI breakout cable, a bunch of patch wires of every type and a quick start guide.
Read more
 2 in stock $551.98
Click for better price!
quote 719647
NUX
Cat: 735364 Rel: 04 Jun 19
 
Analogue acoustic preamp with digital effects & looper function
Notes: NUX Stageman Floor is an analogue acoustic preamp with digital effects and looper function. The preamp features a highly sensitive 3-band EQ with MID scoop toggle switch, adjustable notch filter and input gain control. It is equipped with multi-functional chorus & reverb effects. High headroom gain stage with 3-band EQ, mid-scoop and switchable response for piezo or magnetic pickups. A built-in looper can make use of both pedals for freeze and overdub effects. A complete stage or studio tool for acoustic players.
Read more
 2 in stock $104.20
Click for better price!
quote 735364
Cat: 732328 Rel: 10 Jun 19
 
Premium 6-channel audio interface featuring high resolution audio recording
Notes: Connect, create, and collaborate with our six-in, six-out audio interface. Featuring high-definition recording, ultra-low latency, and flexible connectivity, AUDIO 6 brings your whole setup together. You can plug in mics, guitars, and synths, create send and return loops with effects, and control synths and drum machines. Plus, you get all the software you need to capture performances, build songs, and polish recordings - bring any idea to life.

Whether recording your next album or gigging your latest release, your focus should be on creating at your best. With pro-grade sound, gig-ready portability, and plug-and-play simplicity, AUDIO 6 lets you do just that.

AUDIO 6 works with all your mics, instruments, and headphones. You've got a choice of connections and features: 48V phantom power, MIDI in/out, and four analogue outputs with additional CV/gate control for your analogue gear. Plus, easy-to-see top panel LED VU-meters for all four analogue inputs and the main stereo output.

Whether you're a solo performer, duo, or a full band, the AUDIO 6's pristine audio quality lets you sound as good on stage as in the studio. Turn your laptop into a live rig or vocal processor, with flexible connections to fit any performance. USB bus-power means fewer cables and power supplies, plus a big volume knob on top lets you make easy level adjustments while on stage.

Two high-power headphone outputs, with individual level controls, make it easy to collaborate. Hear exactly what you're recording, in real-time, with latency-free direct monitoring that lets you blend playback and monitored audio to your liking. We've also doubled their output power - great for stage use or high-impedance headphones.

Whether at a small band session or a freewheeling modular synth jam, having a flexible set of connections lets you bring your ideas together and capture music in the moment. XLR, TRS, S/PDIF, and MIDI aren't just letters, they're ways to make music happen - and we've put these connections right where you need them.
Read more
 1 in stock $187.85
Click for better price!
quote 732328
Cat: 717051 Rel: 03 Jun 19
 
Versatile modulation effects pedal
Notes: The Mad Professor Double Moon is a small, easy to use and super versatile pedal for a wide variety of modulation sounds. True analogue bucket brigade signal paths with a Tone control makes the Double Moon a long-awaited modulation pedal for today's guitar player.

Double Moon pedal has 11 carefully designed modes that will let you dial in, not only all of the classic modulation effects, but far beyond that. All of the sounds are easily reached from a rotary switch: 3 chorus effects, 3 dual chorus effects, 3 flanger effects, flanger+chorus and a vibrato.

You can further on fine tune the LFO wave or Regen depending on the mode by the Control knob. The Depth knob will let you dial in the desired amount of the effect and the Speed knob will control the speed of the effect.

Modulation effects from mild to deep, motionless to faux-Leslie type, it's all there with the added Tone control!
Read more
 2 in stock $243.59
Click for better price!
quote 717051
Cat: 730434 Rel: 11 Jun 19
 
Polyrhythmic drum module featuring raw analogue drum sound
Notes: - 3 x external audio out
- 1 x audio out
- 3 x cassation bass drum
- With clock
- Internal or external
- Trigger in
- Click out

The MULTI CASSA is an electronic Eurorack module for percussion sound and special FX. Created by LEP Laboratories, the MULTI CASSA module takes inspiration from the Leploop synth. MULTI CASSA is a combination of two modules with different pitch settings, the first maintains the original pitch, the second increases the pitch to recreate the sound off high tom or snare drum.

TRIG MIX: The rhythm played by the MULTI CASSA is the sum of the two trig IN1 and IN2. The trig mix pot adjusts the mix between the two trig input, which is great for creating polyrhythms.

FREQUENCY: Adjusts the pitch of the sound, also effects the resonance.

RESONANCE: Adjust the resonance, i.e. the damping time of the case. Beyond a certain level the MULTI CASSA can go into permanent oscillation. The level at which the oscillation begins varies with frequency.

DISTORTION: Adjusts the level of signal distortion.
Read more
 2 in stock $275.99
Click for better price!
quote 730434
Cat: 730432 Rel: 11 Jun 19
 
Bass line generator with a rhythmic chord section
Notes: The Arpopone from LepLoop is a little synth-voice for generating a melody or bass line and a chord section at the same time. It is based on analog ramp dividers of which each one generates a voltage ramp starting from a master clock that can be internal or external.

Trig1 and Trig2 potentiometers set the number of clock pulses.

With the Trig Mix switch it is possible to select between a single trigger (1 or 2) or both (1+2) to advance the scales.

The Scale Step potentiometer sets the number of steps for the two scale generators.
In the mixer section, the two scales are summed together to obtain a more complex pattern. The amount of each scale can be set by two controls and can be positive (ascending scale) or negative (descending scale).

With the VCO Pitch knob, the melody can be transposed while maintaining the same interval between notes.

The note generated by the VCO is fed to a chain of dividers to obtain four sub harmonics of the original note. One of these is the bass section with its own filter and envelope, the other three form the chord section with their envelope.

The two envelope sections are identical, both have a selector for different trigger sources:

Trig1 & Trig2: the envelope starts at the flash of the green LED (bass) or yellow LED (chord)
SB1 & SB2: the envelope starts at the first step of Scale1 (bass) or Scale2 (chord)
White & Blue: the envelope follows the intensity of the white LED (bass) or the blue LED (chord). Except for this setting the envelope length is set by the two controls Bass ENV and Chord ENV. Additionally, an EXT CV input allows to provide an external envelope.
The bass channel is passed through a resonant low-pass filter with Cutoff and Resonance control.

Finally the Bass and Chord channels are mixed together. The output level is set by the Bass LEV and Chord LEV controls.
Read more
 4 in stock $314.81
Click for better price!
quote 730432
Cat: 719369 Rel: 06 Jun 19
 
Volume envelope manipulation with adjustable Decay & Attack times
Notes: The circa-1980 Electro-Harmonix Attack Decay is a sought after prize among vintage pedal aficionados. Originally called a Tape Reverse Simulator, it’s known for producing volume and reverse swells, backward tape sounds, artificially short staccato notes and bowed instrument effects. The new Attack Decay reinterprets the classic and keeps its cool factor, but adds some modern features for convenience and enhanced functionality.

It can produce a single volume envelope like the original, or, with Poly engaged, put separate volume envelopes on each note you play. The built-in Harmonix fuzz is now a fully controllable distortion with gain, tone and volume controls. The effects loop allows the musician or sound designer to place the volume envelope onto whatever signal is present at the Return jack. Expression pedal/CV input and three user presets give the user total control over their Attack Decay!
Read more
 3 in stock $115.44
Click for better price!
quote 719369
Cat: 733923 Rel: 07 Jun 19
 
Switch mode AC/DC fixed voltage power supply
Notes: Eagle 20W fixed voltage (9V) switch mode AC/DC power with UK Plug. Supplied with 6 tips: 3.5 x 1.35 x 10 mm, 5.0 x 2.1 x 12 mm, 5.5 x 1.5 x 12 mm, 5.5 x 2.5 x 12 mm, 2.5 mm & 3.5 Jack Plug the product is ideal for computer equipment, children's toys, keyboards and many other 9V devices up to 20W.
Read more
 2 in stock $15.51
Cat: 731951 Rel: 11 Jun 19
 
Quad passive switch - 4HP
Notes: A-182-2 is a simple passive module that contains four changeover switches, which are used to connect or disconnect the sockets of the corresponding socket triplet:

- In the upper position of the switch the upper socket of the corresponding socket triplet is connected to the centre socket
- In the lower position of the switch the lower socket of the corresponding socket triplet is connected to the centre socket
- In the centre position of the switch the sockets are not connected

Each unit of the module can be used to switch between two signals or to interrupt/connect a signal. In the last case the third socket of the triplet is not used.

The module is fully passive and both audio or control signals can be switched.
Read more
 1 in stock $68.14
Click for better price!
quote 731951
Cat: 577779 Rel: 14 Jun 19
 
Passive multi-port distributor - 2HP
Notes: 2HP narrow version of the A-180 multiples module. It is a passive signal splitter suitable for audio or CVs. Two sets of four jacks are interconnected, by placing a solder bridge you can connect all eight jacks.
Read more
 1 in stock $35.16
Cat: 577786 Rel: 06 Jun 19
 
Multi-connector module - 4HP
Notes: Modules A-180-1 and A-180-2 are simple multi-connectors. They have eight inter-connected sockets, so that you can "multiply" any audio or control signal. From the factory the modules come as two four-fold multiples. But they can be modified as an eight-fold multiple (solder bridge on the pcb). Though these modules are very "primitive" they are required very often in patches (e.g. to distribute a clock signal or a control voltage). Within a big A-100 system sufficient multiples should be planned. The function of A-180-1 and A-180-2 is the same. The modules differ only in the front panel width.

For the distribution of control voltages used for pitch control of several VCOs the buffered multiple A-185-2 is recommended. This module has a built in buffer (and a lot of additional features like CV summing) that avoids small voltage losses that may be heard in pitch control applications.
Read more
 1 in stock $35.67
Cat: 577770 Rel: 06 Jun 19
 
Low frequency oscillator featuring 5 different waveforms - 8HP
Notes: Module A-145 is a low frequency oscillator, which produces cyclical control voltages in a very wide range of frequencies. Five waveforms are available: sawtooth, inverted sawtooth, triangle, sine and square wave.

The LFO can be used as a modulation source for any number of modules - for instance modulating the pulse width or frequency of a VCO, modulation of the cut-off frequency of a VCF, or amplitude modulation with a VCA.

A three-way switch lets you select three frequency ranges, spanning from one cycle every several minutes at the lowest, to moderate audio frequency at the highest (about 4-5 kHz).

The LFO signal can also be synchronised, via the reset input.
Read more
 1 in stock $63.49
Cat: 731947 Rel: 10 Jun 19
 
Compact 4-channel mixer - 4HP
Notes: Module A-138n is a simple four channel mixer, which can be used with either control voltages or audio signals. Each of the four inputs has an attenuator available. The output is twice available (two sockets, hard-wired like a multiple).

The module is the slim version of module A-138a and offers nearly the same features. But the distances between the controls are smaller and rubberized small-sized knobs are used. In return the front panel has 4 HP only which is half the width of the A-138a. The module is primarily planned for applications where only limited space is available. The only functional difference compared to the A-138a is the missing attenuator for the (dual) output.
Read more
 1 in stock $57.56
Click for better price!
quote 731947
Cat: 731945 Rel: 10 Jun 19
 
Multi-featured mixer - 6HP
Notes: Module A-138i is a four channel mixer with an additional mute switch for each input. On top of that it is equipped with two types of single outputs and a dual mix output. All inputs and outputs are DC coupled. Consequently the VCAs can be used to mix both audio and control voltages.

Each input is - apart from the mute switch - equipped with the usual attenuator.

The single outputs offer the attenuated and possibly muted signal of the channel in question. Two version of single outputs are available:

Single Output A: If a plug is inserted into the single output "A" socket the channel in question is removed from the sum signal.

Single Output B: If a plug is inserted into the single output "B" socket the channel in question is not removed from the sum signal. This type of single outputs is available only for the channels 1 and 2.

The output is twice available (two sockets, hard-wired like a multiple).

The distances between the controls and sockets are smaller as for the standard A-100 modules and rubberized small-sized knobs are used. In return the front panel has 6 HP width only. The module is primarily planned for applications where only limited space is available.
Read more
 1 in stock $76.60
Click for better price!
quote 731945
Cat: 731938 Rel: 10 Jun 19
 
Noise/random generator - 4HP
Notes: Module A-118-2 is the slim version of module A-118-1 and offers essentially the same features as the A-118-1. But the distances between the controls are smaller and rubberized small-sized knobs are used. In return the front panel has 4 HP only which is half the width of the A-118-1. The module is primarily planned for applications where only limited space is available. The functional difference between A-118-1 and A-118-2 is the additional T&H/S&H unit which is not included in the A-118-1.

The module generates the signals white noise, coloured noise, continuous random voltage and stepped random voltage (derived from the continuous random voltage by means of a S&H/T&H unit).

The noise signal is generated 100% analogue by amplification of the noise of a transistor. White and coloured noise are usually used as audio sources. The random voltages are normally used as control voltages (e.g. for filter frequency or any other voltage controlled parameter).

The A-118-2 gives you the ability to mix the relative amounts of Red (low frequency component) and Blue noise (high frequency component) in the coloured noise output.

For the continuous random voltage the rate of change (Rate) and amplitude (Level) of the random voltage can be adjusted. The continuous random voltage is derived from the coloured noise signal by low pass filtering. Consequently the settings of the controls for the coloured noise (Blue, Red) affect the behaviour of the random voltage! A dual colour LED (red = positive / yellow = negative output voltage) indicates the continuous random voltage.

The continuous random voltage is used as source for the S&H/T&H unit. The type of operation can be set to S&H (sample and hold) or T&H (track and hold). When T&H is chosen the output signal follows the input signal (= continuous random voltage) as long as the Clock input is "high". As soon as the clock signal changes to "low" the last voltage is stored. When S&H is chosen the input signal (= continuous random voltage) is sampled at the rising edge of the Clock signal.

For the Clock signal a "digital" signal (e.g. Clock, Gate, rectangle output of an LFO) is required. It does not work with slowly changing continuous CV signals. Another dual colour LED (red = positive / yellow = negative output voltage) indicates the stepped random voltage.
Read more
 2 in stock $78.70
Click for better price!
quote 731938
Cat: 577753 Rel: 06 Jun 19
 
12dB multi-mode filter - 8HP
Notes: Module A-106-5 is a 12dB multimode filter that is based on the filter circuit of the Oberheim SEM module.

The filter is equipped with a band pass output and a combined low/notch/high pass output. For this output a control knob defines the relation between low and high pass signal. If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates.

The module does not feature self-oscillation in contrast to most of the other filters of the A-100 system.

The module generates a distorted audio signal if the level control is set to about 50% (i.e. centre position) or more with A-100 standard signals like VCOs.
Read more
 2 in stock $77.65
Click for better price!
quote 577753
Cat: 735370 Rel: 11 Jun 19
 
Compact mixer with USB/Bluetooth
Notes: Compact format audio mixer with 4 mono input channels and a stereo line input. Each mono channel has a combo XLR/jack input with individually switchable mic/instrument impedance and +48V phantom power for the XLR. Input channels have High/Low EQ and Pan controls and mono channels also have Effects level to vary the amount of internal digital delay effect added for vocals or instruments. An internal player/recorder with backlit display can accept a USB memory stick containing compressed audio files in various formats or alternatively connect to a smart phone via Bluetooth for wireless link. Output is delivered on a pair of balanced XLR connectors and offers very low noise operation for high quality studio or live performances.
Read more
 2 in stock $80.28
Click for better price!
quote 735370
Cat: 735368 Rel: 11 Jun 19
 
Compact mixer with USB/Bluetooth
Notes: Compact format audio mixer with 2 mono input channels and a stereo line input. Each mono channel has a combo XLR/jack input with individually switchable mic/instrument impedance and +48V phantom power for the XLR. Input channels have High/Low EQ and Pan controls and mono channels also have Effects level to vary the amount of internal digital delay effect added for vocals or instruments. An internal player/recorder with backlit display can accept a USB memory stick containing compressed audio files in various formats or alternatively connect to a smart phone via Bluetooth for wireless link. Output is delivered on a pair of balanced XLR connectors and offers very low noise operation for high quality studio or live performances.
Read more
 2 in stock $64.95
Click for better price!
quote 735368
Cat: 731924 Rel: 03 Jun 19
 
Console-style, precision monitor control
Notes: Building on over 20 years of expertise in analogue console heritage, Nero has been designed to give you powerful control over your monitoring. Featuring a comprehensive range of I/O, console style monitor control, Precision Matched Attenuation Technology and more... Nero will quickly become the core of your studio.

Inputs:

As your studio grows it becomes harder to control. Nero enables you to centralise, connect and control all your monitoring needs from your desktop using Nero's array of stereo inputs.

Outputs:

Reference your mixes on up to three sets of speakers, independently set and match volume for all speakers and audition and assign your sub to any monitor path. Nero also provides one dedicated monitor grade headphone amp and three foldback grade headphone amps, making sure you're ready to take on the loudest of sessions with crystal clear headphone mixes.

Assignable Sub:

Easily assign a sub to activate when switching to a monitor path of choice but maintain the ability to switch it on and off without losing your saved preset. Nero also lets you audition the sub on any alternative set of speakers without forcing you to assign it permanently.

Smart Touchpoints:

Smart Touchpoints enable you to customise your workflow on the fly. Easily route and configure Nero's outputs and monitor controls to create monitoring combinations that suit your needs. Simply hold down a Smart Touchpoint to put it into setup mode, select your routing options and press it again to save.

Precision Matched Stereo Volume Control:

Nero perfectly matches the volume of the left and right channels of your stereo signal using Audient's custom Precision Matched Attenuation Technology. Unlike other monitor controllers, this prevents any deviation in volume between your left and right monitors or unbalancing of your stereo image, enabling you to monitor accurately and mix with confidence.

Console Style Monitor Control:

Utilising Audient's vast experience in implementing monitor control in both recording consoles and desktop controllers, Nero features David Dearden designed circuitry and a range of flexible monitor controls including dedicated talkback, cut & dim along with polarity, mono, speaker select and cue mix monitoring.
Read more
 4 in stock $393.53
Click for better price!
quote 731924
Items 1 to 21 of 21 on page 1 of 1

Filter

Two Weeks: Studio Equipment
Close