100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Back Catalogue: Studio Equipment

View:
Options
Items 2,351 to 2,400 of 2,681 on page 48 of 54
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ALL
«  1  2  3  ...  47  48  49  ...  52  53  54  »
Cat: 647572 Rel: 28 Apr 17
 
Variable dual footswitch
Notes: The Palmer PF2SW is a variable dual footswitch for all devices with a footswitch port. It is suitable for channel switching of amplifiers, to turn on and off built-in and external effects, and can independently control two devices; bright LEDs indicate the switching status. The two circuits of the PF2SW can be adjusted individually to the respective function of the connected devices. To do this, the sliding controller chooses between contact closure and electronic impulse as well as open or closed position of the relay, a further controller selects one of the two footswitches as master for simultaneous switching of both circuits. In most applications, the PF2SW can be connected using conventional 6.35 mm jack cables.
Read more
 1 in stock $66.99
Cat: 647609 Rel: 27 Apr 17
 
Compact monitor controller with TRS & XLR inputs - limited white edition
Notes: With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no effect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.

The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs, thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
Read more
 2 in stock $60.76
Cat: 598254 Rel: 22 Jan 16
 
Wireless UHF beltpack system
Notes: Introducing AT-One, Audio-Technica's entry level UHF wireless system.

With a 2 x 4 channel frequency plan for enhanced flexibility, sturdy but stylish build quality and a simple user interface, AT-One is ready to become your perfect wireless companion.

AT-One is designed with simplicity and ease-of-use in mind. Equipped with a practical carrying case, rack-mount kit and detachable antennae, AT-One is the perfect balance of price and performance, ideal for those looking for accurate, reliable performance at an entry level price.

The AT-One's frequency plan is divided into two groups with 4 available channels in each group split between the Europe wide license free frequency range and the LTE duplex gap. Users can choose up to 4 channels within one group.

Available in three configurations, AT-One can be purchased with a beltpack or handheld transmitter. The ATW-11F comes equipped with a sturdy, discreetly designed beltpack, providing 10mW RF output power, damping switch and a battery life of 10 hours.

Read more
 1 in stock $172.53
Cat: 598256 Rel: 22 Jan 16
 
Wireless UHF transmitter system with 2 x 4 channel frequency plan & cardioid condenser handheld microphone
Notes: Introducing AT-One, Audio-Technica's entry level UHF wireless system. With a 2 x 4 channel frequency plan for enhanced flexibility, sturdy but stylish build quality and a simple user interface, AT-One is ready to become your perfect wireless companion.

AT-One is designed with simplicity and ease-of-use in mind. Equipped with a practical carrying case, rack-mount kit and detachable antennae, AT-One is the perfect balance of price and performance, ideal for those looking for accurate, reliable performance at an entry level price. The AT-One's frequency plan is divided into two groups with 4 available channels in each group split between the Europe wide license free frequency range and the LTE duplex gap. Users can choose up to 4 channels within one group.

Available in three configurations, AT-One can be purchased with a beltpack or handheld transmitter. The ATW-13F handheld system features the ATW-T3F cardioid condenser handheld transmitter, again with 10mW RF output and 10 hour battery life.
Read more
 1 in stock $181.21
Cat: 680618 Rel: 04 Jun 18
 
Package of ULM300M wireless handheld microphone & ULM300RS single-channel receiver
Notes: Once again Behringer broke the affordability barrier - with the new ULTRALINK ULM300MIC Wireless Microphone System, which includes 1 of their high quality ULM300M handheld mics - and the equally-impressive ULM300RS single-channel receiver. Now you are free to work the room to your heart's content, without the hassle and restriction of cables underfoot. Highest-quality sound is provided by the custom-designed microphone capsule that is optimized for vocal performance, and the built-in transmitter that operates in the license-free 2.4 GHz range.

Interference-Free Performance:

Behringer's state-of-the-art transmitter operates in the 2.4 GHz frequency band, which is well out of the way of TV stations and cell phone towers. And since it is digitally encrypted, your signal gets through in all its pristine, high-definition quality, without the random artefacts that often plague other wireless systems. The ULM300RS single-channel receiver tracks your every move, with a range of up to 200 feet (60 m).

Extended Battery Life:

Replacing batteries in wireless mics can get expensive really fast - and having them die in the middle of your set can be a real showstopper! That's why Behringer have devoted extra time to developing the ULM300MIC to ensure that battery life was extended as much as possible. You get an honest 24 hours of performance time from a pair of AA alkaline batteries, which are available virtually anywhere on the planet.

Easy To Use:

Setup couldn't be easier, because the ULM300M mic automatically pairs with the ULM300RS single channel receiver - without you having to lift a finger. Convenient front-panel LEDs on the receiver show your signal presence and strength, while indicators on the transmitter let you know at a glance when it's time to change batteries. Audio outputs are balanced XLR and unbalanced 1/4" TS, allowing you to connect to PA and conference room systems or high-quality instrument amplifiers.

Convenient Control:

Behringer wanted the ULM300MIC to be ultra-easy to operate, so they gave each mic easy-to-understand and operate Volume buttons right on the microphone body. And should you accidentally wander into the "Feedback Zone", they included a handy Panic Mute function that engages when you press and hold the Volume Down button.

Ready for the World:

Operating in the 2.4 GHz band allows your ULM300MIC Wireless Microphone System to be used across the globe without any special licensing requirements.
Read more
 1 in stock $80.14
Cat: 637062 Rel: 11 Jan 17
 
Dual channel PLL tuneable UHF wireless system with 2 handheld microphones
Notes: Receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories. The RF carrier frequency is selected on the receiver and synchronized to the transmitter via infra-red at the touch of a button. Up to 2 RU210 systems can be operated together on the EU licence-free band.
Read more
 2 in stock $154.80
Cat: 589403 Rel: 20 Oct 16
 
Digital wireless system for news gathering and reporting
Notes: RODELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres* (over 100 yards).

The RODELink Newsshooter Kit provides everything you need to start shooting video wirelessly with XLR microphones, including a camera-mounted receiver and an XLR transmitter. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection.

The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The transmitter (TX-XLR) easily connects to handheld presentation microphones as well as shotgun microphones, with a 3.5mm input and headphone output.

*Transmitter & receiver only, microphone not included
Read more
 1 in stock $364.87
Cat: 700968 Rel: 29 Aug 18
 
High quality, versatile condenser microphone
Notes: The RODELink TX-M2 Microphone is a versatile, detailed, and perfectly balanced wireless condenser microphone for singers, presenters, and reporters. Transmitting a 128-bit encrypted signal on the license-free 2.4GHz spectrum, the TX-M2 pairs easily with the RX-DESK and RX-CAM receivers, delivering crystal clear audio and incredibly low handling noise. Designed and made in Australia, the TX-M2 uses next generation digital wireless technology to constantly monitor frequencies and automatically switch to the strongest possible signal level, so users are always given the best quality of sound. With over 100m of range, the stylish and durable TX-M2 is the perfect addition to any Filmmakers' Kit.

The TX-M2 is powered by the LB-1 Lithium-Ion Rechargeable Battery that provides over 10 hours of use in a single charge, or 2x AA batteries for over 6 hours of use. The sleek and portable handheld microphone houses a super cardioid condenser capsule and a mute switch, making it an incredible wireless alternative to the popular M2 microphone while continually delivering the sensitivity and versatility offered by condenser microphones.

The TX-M2 is a great addition to the RODELink Filmmaker Kit, providing a simple wireless microphone solution to all filmmakers.
Read more
 1 in stock $286.45
Cat: 677707 Rel: 12 Feb 18
 
Wireless XLR transmitter for providing one-touch sync with your RODELink wireless system
Notes: The TX-XLR is a wireless XLR transmitter for the RODELink digital wireless system. Providing one-touch sync with your RODELink system and supplying P48 phantom power, the unit can be powered by 2 x AA, a Sony NP-F battery or continuously via Micro USB.
Read more
 1 in stock $284.28
Cat: 587616 Rel: 23 Sep 15
 
High-performance professional UHF wireless system with included rack-mount kit
Notes: Take The Worry Out Of Wireless.

Samson's Concert 88 Headset Wireless System offers a high-performance UHF wireless solution where the freedom of mobility is a must. It's perfect for singers, dancers, DJs, business professionals and others looking for stunning sound and versatility without cables.

The frequency-agile Concert 88 Headset allows for up to 16 systems to operate simultaneously (region dependent) with up to 300' separating the receiver and transmitter. At the core of the system is the CR88 Wireless Receiver. Featuring a true diversity design, the CR88 minimizes signal dropouts during performance. If a dropout does occur, the CR88's tone key and auto mute functions eliminate any background noise until the signal is restored.

The CR88 receiver's front panel provides a Select button for auto syncing receiver and transmitter channels via an infrared signal. The panel also features a 7-segment Channel LED, Volume knob, Power button, two tuned antennas, as well as Audio and Ready indicators, for optimal functionality and monitoring. Balanced XLR and 1/4" outputs can be found on the receiver's back panel.

The Concert 88 Headset features the CB88 Beltpack Transmitter and HS5 Headset Microphone with a locking connector. The transmitter, which can operate for up to eight hours on two AA batteries, is engineered to the finest detail to provide the ultimate in sound reproduction.

With Samson's Concert 88 Headset Wireless System, advanced technology and total versatility combine to provide high-quality wireless performance wherever singers, dancers, DJs, business professionals and others need it.
Read more
 1 in stock $141.51
Cat: 609949 Rel: 23 Sep 15
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Take The Worry Out Of Wireless.

Samson's Concert 88 Headset Wireless System offers a high-performance UHF wireless solution where the freedom of mobility is a must. It's perfect for singers, dancers, DJs, business professionals and others looking for stunning sound and versatility without cables.

The frequency-agile Concert 88 Headset allows for up to 16 systems to operate simultaneously (region dependent) with up to 300' separating the receiver and transmitter. At the core of the system is the CR88 Wireless Receiver. Featuring a true diversity design, the CR88 minimizes signal dropouts during performance. If a dropout does occur, the CR88's tone key and auto mute functions eliminate any background noise until the signal is restored.

The CR88 receiver's front panel provides a Select button for auto syncing receiver and transmitter channels via an infrared signal. The panel also features a 7-segment Channel LED, Volume knob, Power button, two tuned antennas, as well as Audio and Ready indicators, for optimal functionality and monitoring. Balanced XLR and 1/4" outputs can be found on the receiver's back panel.

The Concert 88 Headset features the CB88 Beltpack Transmitter and HS5 Headset Microphone with a locking connector. The transmitter, which can operate for up to eight hours on two AA batteries, is engineered to the finest detail to provide the ultimate in sound reproduction.

With Samson's Concert 88 Headset Wireless System, advanced technology and total versatility combine to provide high-quality wireless performance wherever singers, dancers, DJs, business professionals and others need it.
Read more
 1 in stock $123.70
Cat: 612040 Rel: 01 Jan 90
 
Professional UHF wireless system for guitar with rugged all-metal construction on receiver and transmitter
Notes: Samson's Synth 7 Guitar Wireless System delivers the performance and features normally reserved for more expensive systems. The system's all-metal receiver and transmitter each feature a user-friendly LCD display for superior performance monitoring. Also including an auto frequency spectrum analyzer, 100 channel options, a 300' wireless range and Samson's GC32 guitar cable, the Synth 7 Guitar delivers high definition sound and professional UHF wireless performance at an unbeatable price.

Dynamic Display:
Synth 7's UR7 Wireless Receiver was designed with dark stage environments in mind. Unlike hard-to-read dot matrix or simple backlit displays on other wireless receivers, Synth 7 features a bright full-color LCD that allows you to clearly monitor settings such as transmitter battery life, receiver volume level, RF signal strength and operating channel. The display enables faster setup and allows you to lock your settings to avoid performance interruptions.

Worry Free Setup:
Since 1980, Samson's mission has been to take the worry out of wireless. Synth 7 honors that goal with its 1-touch auto frequency spectrum analyzer. This tool not only selects the optimal operating frequency for a given location, but it provides a full readout of the RF spectrum for a clear picture of your specific wireless environment. In addition, Synth 7's IR Set allows you to wirelessly sync your transmitter to the receiver's operating frequency.

Superior Sound:
Samson's all-metal UB7 Beltpack Transmitter comes with Samson's GC32 guitar cable, featuring a locking connector. Complete with its own LCD for monitoring battery life (up to 15 hours on two AA batteries) and current operating channel, the UB7 was meticulously crafted to meet the demands of serious performers.

Multiple Systems:
With Synth 7, up to 20 systems can be operated simultaneously (region dependent) in the same location. As you introduce more performers, the Group Scan feature makes the setup of multiple systems both fast and easy. This function allows you to see how many channels within the group are clean, clear and ideal for use.

Performance Security:
Synth 7 counteracts interference from unlicensed white space and other stray RF signals. An adjustable Squelch control sets the threshold level of the receiver's reception sensitivity, ensuring unwanted RF signals go unnoticed by your audience. Also, a pilot Tone Key blocks invading signals when your transmitter is turned off or out of range. Finally, the system's true diversity circuitry effectively eliminates multi-path interference.
Read more
 1 in stock $189.89
Cat: 587612 Rel: 23 Sep 15
 
Professional UHF wireless system for guitar with rugged all-metal construction on receiver and transmitter
Notes: Samson's Synth 7 Guitar Wireless System delivers the performance and features normally reserved for more expensive systems. The system's all-metal receiver and transmitter each feature a user-friendly LCD display for superior performance monitoring. Also including an auto frequency spectrum analyzer, 100 channel options, a 300' wireless range and Samson's GC32 guitar cable, the Synth 7 Guitar delivers high definition sound and professional UHF wireless performance at an unbeatable price.

Dynamic Display:
Synth 7's UR7 Wireless Receiver was designed with dark stage environments in mind. Unlike hard-to-read dot matrix or simple backlit displays on other wireless receivers, Synth 7 features a bright full-color LCD that allows you to clearly monitor settings such as transmitter battery life, receiver volume level, RF signal strength and operating channel. The display enables faster setup and allows you to lock your settings to avoid performance interruptions.

Worry Free Setup:
Since 1980, Samson's mission has been to take the worry out of wireless. Synth 7 honors that goal with its 1-touch auto frequency spectrum analyzer. This tool not only selects the optimal operating frequency for a given location, but it provides a full readout of the RF spectrum for a clear picture of your specific wireless environment. In addition, Synth 7's IR Set allows you to wirelessly sync your transmitter to the receiver's operating frequency.

Superior Sound:
Samson's all-metal UB7 Beltpack Transmitter comes with Samson's GC32 guitar cable, featuring a locking connector. Complete with its own LCD for monitoring battery life (up to 15 hours on two AA batteries) and current operating channel, the UB7 was meticulously crafted to meet the demands of serious performers.

Multiple Systems:
With Synth 7, up to 20 systems can be operated simultaneously (region dependent) in the same location. As you introduce more performers, the Group Scan feature makes the setup of multiple systems both fast and easy. This function allows you to see how many channels within the group are clean, clear and ideal for use.

Performance Security:
Synth 7 counteracts interference from unlicensed white space and other stray RF signals. An adjustable Squelch control sets the threshold level of the receiver's reception sensitivity, ensuring unwanted RF signals go unnoticed by your audience. Also, a pilot Tone Key blocks invading signals when your transmitter is turned off or out of range. Finally, the system's true diversity circuitry effectively eliminates multi-path interference.
Read more
 2 in stock $237.63
Cat: 587615 Rel: 23 Sep 15
 
Premium UHF wireless system with rugged all-metal construction on receiver and transmitter
Notes: The Wireless Future:
Samson's Synth 7 Presentation Wireless System delivers the performance and features normally reserved for more expensive systems. The system's all-metal receiver and transmitter each feature a user-friendly LCD display for superior performance monitoring. Also including an auto frequency spectrum analyzer, 100 channel options, a 300' wireless range and Samson's LM10 lavalier microphone, the Synth 7 Presentation delivers high definition sound and professional UHF wireless performance at an unbeatable price.

Dynamic Display:
Synth 7's UR7 Wireless Receiver was designed with dark stage environments in mind. Unlike hard-to-read dot matrix or simple backlit displays on other wireless receivers, Synth 7 features a bright full-color LCD that allows you to clearly monitor settings such as transmitter battery life, receiver volume level, RF signal strength and operating channel. The display enables faster setup and allows you to lock your settings to avoid performance interruptions.

Worry Free Setup:
Since 1980, Samson's mission has been to take the worry out of wireless. Synth 7 honors that goal with its 1-touch auto frequency spectrum analyzer. This tool not only selects the optimal operating frequency for a given location, but it provides a full readout of the RF spectrum for a clear picture of your specific wireless environment. In addition, Synth 7's IR Set allows you to wirelessly sync your transmitter to the receiver's operating frequency.

Superior Sound:
Samson's all-metal UB7 Beltpack Transmitter comes with Samson's LM10 lavalier microphone, featuring a micro-miniature condenser capsule, lightweight clip design and a locking connector. Complete with its own LCD for monitoring battery life (up to 15 hours on two AA batteries) and current operating channel, the UB7 was meticulously crafted to meet the demands of serious performers.

Multiple Systems:
With Synth 7, up to 20 systems can be operated simultaneously (region dependent) in the same location. As you introduce more performers, the Group Scan feature makes the setup of multiple systems both fast and easy. This function allows you to see how many channels within the group are clean, clear and ideal for use.

Performance Security:
Synth 7 counteracts interference from unlicensed white space and other stray RF signals. An adjustable Squelch control sets the threshold level of the receiver's reception sensitivity, ensuring unwanted RF signals go unnoticed by your audience. Also, a pilot Tone Key blocks invading signals when your transmitter is turned off or out of range. Finally, the system's true diversity circuitry effectively eliminates multi-path interference.
Read more
 1 in stock $150.83
Cat: 668135 Rel: 01 Jan 90
 
***B-STOCK: Box opened, product unused***
Notes: The Wireless Future:
Samson's Synth 7 Presentation Wireless System delivers the performance and features normally reserved for more expensive systems. The system's all-metal receiver and transmitter each feature a user-friendly LCD display for superior performance monitoring. Also including an auto frequency spectrum analyzer, 100 channel options, a 300' wireless range and Samson's LM10 lavalier microphone, the Synth 7 Presentation delivers high definition sound and professional UHF wireless performance at an unbeatable price.

Dynamic Display:
Synth 7's UR7 Wireless Receiver was designed with dark stage environments in mind. Unlike hard-to-read dot matrix or simple backlit displays on other wireless receivers, Synth 7 features a bright full-color LCD that allows you to clearly monitor settings such as transmitter battery life, receiver volume level, RF signal strength and operating channel. The display enables faster setup and allows you to lock your settings to avoid performance interruptions.

Worry Free Setup:
Since 1980, Samson's mission has been to take the worry out of wireless. Synth 7 honors that goal with its 1-touch auto frequency spectrum analyzer. This tool not only selects the optimal operating frequency for a given location, but it provides a full readout of the RF spectrum for a clear picture of your specific wireless environment. In addition, Synth 7's IR Set allows you to wirelessly sync your transmitter to the receiver's operating frequency.

Superior Sound:
Samson's all-metal UB7 Beltpack Transmitter comes with Samson's LM10 lavalier microphone, featuring a micro-miniature condenser capsule, lightweight clip design and a locking connector. Complete with its own LCD for monitoring battery life (up to 15 hours on two AA batteries) and current operating channel, the UB7 was meticulously crafted to meet the demands of serious performers.

Multiple Systems:
With Synth 7, up to 20 systems can be operated simultaneously (region dependent) in the same location. As you introduce more performers, the Group Scan feature makes the setup of multiple systems both fast and easy. This function allows you to see how many channels within the group are clean, clear and ideal for use.

Performance Security:
Synth 7 counteracts interference from unlicensed white space and other stray RF signals. An adjustable Squelch control sets the threshold level of the receiver's reception sensitivity, ensuring unwanted RF signals go unnoticed by your audience. Also, a pilot Tone Key blocks invading signals when your transmitter is turned off or out of range. Finally, the system's true diversity circuitry effectively eliminates multi-path interference.
Read more
 1 in stock $189.89
Cat: 702250 Rel: 11 Sep 18
 
High-quality wireless memory mic
Notes: Memory Mic initially connects via Bluetooth and you don't have to worry about getting out of range. The microphone continues to record at any distance from your smartphone.
The microphone features a high quality condenser capsule and the unique Sennheiser technology secures unlimited recording distance between the Memory Mic and your smartphone. One touch audio and video synchronization gives you smooth and wireless audio recording, with dropout free results.
Lightweight and rugged housing and the easy attachable magnetic clip makes the Memory Mic a must have for smartphone video recording.
The Memory Mic records up to 4 hours of audio which will automatically synchronize with your smartphone video via a Sennheiser Memory Mic App, downloadable through App Store or Google Play.
Read more
 1 in stock $183.38
Cat: 520200 Rel: 07 Feb 14
 
Wireless microphone & receiver system for live performance
Notes: The Beta 58A dynamic vocal microphone is precision-engineered for live performance and project studio recording. A tailored frequency response accentuates vocals, and the supercardioid pattern isolates from other sound sources. It combines automatic frequency management with true digital diversity for a rock-solid wireless signal with exceptional digital audio clarity.

The Beta 58A dynamic vocal microphone is precision-engineered for live performance and project studio recording. A tailored frequency response accentuates vocals, and the supercardioid pattern isolates from other sound sources.

The microphone automatically links with GLX-D wireless receivers for seamless frequency changing and any necessary gain adjustment, up to 16 hours of continuous use with Shure proprietary Lithium-Ion rechargeable batteries, up to 60 m (200 ft.) transmission radius, lightweight and rugged construction, two-colour transmitter status indicator LED

Proprietary Automatic Frequency Management: Intelligent frequency management quickly identifies the best open channels, 2.4 GHz frequency band allows operation of up to 8 compatible systems (depending on operation mode), high-resolution LCD screen, real-time battery run-time displayed in hours and minutes (accurate within +/- 15 minutes), remote adjustable transmitter gain control
Read more
 1 in stock $335.28
Cat: 520193 Rel: 07 Feb 14
 
Wireless microphone system with professional Shure PG58 microphone
Notes: The BLX24/PG58 Handheld Wireless System is part of the handheld wireless systems family.

Shure BLX Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it's the most accessible way to own the stage.

Includes BLX4 single-channel receiver, PG58 handheld transmitter, microphone clip, power supply, 2 AA batteries, and user guide.
Read more
 2 in stock $224.29
Cat: 520196 Rel: 06 Feb 14
 
Wireless vocal microphone system with Shure SM58 microphone & receiver
Notes: The SM Wireless Vocal System with SM58, an industry-standard, highly versatile cardioid dynamic vocal microphone, tailored to deliver warm and clear vocal reproduction combines simple setup and an intuitive interface for performance you can trust in.

The SM58 is an ideal choice for a professional vocal artist in any live performance setting. It is tuned to accentuate the warmth and clarity of lead and backing vocals. Even in extreme conditions, the SM58 is tailored to target the main sound source while minimising background noise. It is also very popular with djs and presenters in clubs and in small and large live venues.

With durable construction, a proven shock-mount system, and a steel mesh grille ensure that even with rough handling, the SM58 will perform consistently, outdoors or indoors.

The SM Wireless Vocal System comes with the Analogue Wireless Receiver BLX4 that provides improved linearity and frequency response. The BLX receiver is ready to perform right out of the box and is a great choice for performers who wish to unplug from the wire. It's also available as a rack-mountable, metal receiver and Dual Receiver.
Read more
 3 in stock $264.98
Cat: 530584 Rel: 28 Apr 14
 
Wireless handheld microphone solution featuring Beta58 microphone capsule, GLXD2 transmitter & GLXD4 reciever
Notes: The Shure GLXD24UK/B58 features the leading-edge LINKFREQ automatic frequency management system alongside lithium-ion rechargeable technology and digital radio transmission- providing outstanding vocal reproduction combined with top quality wireless connectivity.

Equipped with the Beta 58A super cardioid microphone capsule, the GLXD24UK/B58 system is designed for close vocal work and captures vocals with definition and tone whilst rejecting unwanted off axis noise. Tried and tested, the Beta 58A capsule has been proved to offer not only outstanding audio quality, but gig hardy reliability- show after show.

Seamless and dependable wireless connectivity is provided thanks to the intelligent GLX-D digital radio system. Once the transmitter and receiver are switched on, the system auto-scans for the best available radio space and then automatically links both units to the best available frequency. If any interference occurs, the system cleverly shifts both transmitter and receiver to a clear frequency, avoiding disruption to the performance.

The GLXD2/B58 handheld transmitter features a durable, lightweight design and can deliver digital audio clarity at a range of up to 60m in line of sight from the receiver. Shure lithium-ion rechargeable batteries offer convenience and the ability for 16 hours continual usage and can be charged from a USB port if required.

The GLXD4 single-channel wireless receiver features the revolutionary LINKFREQ automatic frequency management system ensuring minimum disruption to connectivity when faced with interference. The GLXD4 features a charging port, allowing the GLXD2 transmitter battery to be recharged when the receiver is powered.

For intelligent digital connectivity and audio quality, with the trusted Shure Beta 58A vocal definition, the GLXD24UK/B58 is the perfect solution.
Read more
 2 in stock $440.54
Cat: 681280 Rel: 28 Apr 14
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The Shure GLXD24UK/B58 features the leading-edge LINKFREQ automatic frequency management system alongside lithium-ion rechargeable technology and digital radio transmission- providing outstanding vocal reproduction combined with top quality wireless connectivity.

Equipped with the Beta 58A super cardioid microphone capsule, the GLXD24UK/B58 system is designed for close vocal work and captures vocals with definition and tone whilst rejecting unwanted off axis noise. Tried and tested, the Beta 58A capsule has been proved to offer not only outstanding audio quality, but gig hardy reliability- show after show.

Seamless and dependable wireless connectivity is provided thanks to the intelligent GLX-D digital radio system. Once the transmitter and receiver are switched on, the system auto-scans for the best available radio space and then automatically links both units to the best available frequency. If any interference occurs, the system cleverly shifts both transmitter and receiver to a clear frequency, avoiding disruption to the performance.

The GLXD2/B58 handheld transmitter features a durable, lightweight design and can deliver digital audio clarity at a range of up to 60m in line of sight from the receiver. Shure lithium-ion rechargeable batteries offer convenience and the ability for 16 hours continual usage and can be charged from a USB port if required.

The GLXD4 single-channel wireless receiver features the revolutionary LINKFREQ automatic frequency management system ensuring minimum disruption to connectivity when faced with interference. The GLXD4 features a charging port, allowing the GLXD2 transmitter battery to be recharged when the receiver is powered.

For intelligent digital connectivity and audio quality, with the trusted Shure Beta 58A vocal definition, the GLXD24UK/B58 is the perfect solution.
Read more
 1 in stock $422.86
Cat: 670117 Rel: 10 Nov 17
 
Portable guitar amplifier with 7 digitally modelled amplifiers & 6 types of multi-effects
Notes: This compact unit provides a polished, recordable sound with 8W output through the 6.5" speaker. For production quality on the move, the Mini Rock Station can be operated from battery power and can even hang from a shoulder strap. Incredible flexibility is afforded by this little amp for a near limitless variety of situations.
Read more
 2 in stock $95.95
Cat: 700859 Rel: 30 Aug 18
 
Mini headphone amp for guitars
Notes: - Aux input for MP3/CD player
- On/off switch
- Guitar input (6.3 mm jack)
- Headphone input (3.5 mm jack)
- Level, gain and tone controls
- Operation via 2 x AAA batteries (not included)
Read more
 1 in stock $17.35
Cat: 629392 Rel: 05 Jan 17
 
Versatile battery-powered micro amp with built-in iOS interface
Notes: What if you could carry in the palm of your hand a guitar amp that had access to virtually any guitar sound you can imagine? And what if you could drive a 4x12" cab with it with no additional gear needed? Now you can with the new iRig Nano Amp - the first micro guitar amp and interface for the mobile guitarist. iRig Nano Amp is a super-compact battery-powered self-contained micro amp and interface for iOS that you can use by itself, with headphones or even an external speaker cabinet - this power-packed amazing little amp can drive up to a 4x12" guitar cab! But what makes it more versatile than any other micro amp is that it features the iRig circuitry so you can plug your iPhone or iPad into it with the included TRRS cable and tap into the limitless world of AmpliTube guitar tone and more on your iPhone and iPad.

Dual Mode Operation - AMP/DEVICE:
What makes iRig Nano Amp so unique is that you can operate it in two different modes: AMP & DEVICE. In AMP mode it's a standalone amp for impromptu practice anywhere. In DEVICE mode you use it as an interface and amp for your iOS device. Plus, in both modes you can use the built-in speaker or hook up an external speaker cabinet - up to a 4x12" cab - for more volume and tonal clarity. iRig Nano Amp is the most versatile, feature rich micro amp in the market and provides you with outstanding value and performance.

AMP mode:
iRig Nano Amp operates as a straight up guitar amp and features a British tone stack circuit with gain and volume controls for practice on the go. Simply plug in your guitar to the 1/4" guitar input, adjust your volume and gain settings, select the output type NORMAL/BRIGHT and rock out anywhere you happen to be. The British tone circuit delivers sparkling clean tones at lower gain settings and a cascading wave of overdrive when cranking the gain to the upper limits.

DEVICE mode:
iRig Nano Amp is also an interface and output for your iOS device thanks to its integrated iRig circuit. Use the included TRRS cable to hook iRig Nano Amp in DEVICE mode to your iPhone or iPad and plug in to the amazing toneful world of AmpliTube - the ultimate guitar and bass tone studio - to play, practice and record anywhere, any time. This is great for grabbing ideas in the AmpliTube 4-track looper or recording studio, or just practicing with your favourite AmpliTube gear and more. When used in DEVICE mode, the internal tone stack circuit is bypassed and the volume knob controls the overall output of the amp. This lets you hear only the processed signal coming from your iOS device with no additional amp coloration. Also in DEVICE mode, the 1/8" headphone jack is active so you can play/record in the privacy of your own headspace.

Drive a Cab:
iRig Nano Amp features a 1/4" speaker out jack that - get this - can drive up to a 4x12" cabinet. When you plug in, you'll be floored by the volume and tonal definition that iRig Nano Amp provides. You can connect an external cab in both AMP and DEVICE modes giving you the most flexibility of any "micro" amp out there.

Portable versatility:
iRig Nano Amp is compact - it's just slightly larger than an iPhone, fits in any gig bag or the palm of your hand and features a handy "kickstand" for tilting back the unit for better monitoring. Inside, iRig Nano Amp powers a 3" speaker with a 3-watt class A/B power amp. When in Amp mode, you set your overall output volume with the volume control, then dial in just the right amount of saturation and distortion for your playing pleasure.

iRig Nano Amp features a 1/4" guitar input, a 1/4" speaker output, an 1/8" headphone jack, is powered by 3 AA batteries (included) and comes complete with a TRRS cable for connection to an iOS device. It can be used with 3 output monitoring options - with headphones for private practice and recording in DEVICE mode, and with the internal speaker active, or with an external speaker cabinet connected to the 1/4" speaker out in both DEVICE and AMP modes. When used with headphones or an external cab, the internal speaker can be muted with the volume control knob.

Tap into the limitless guitar tone with AmpliTube:
iRig Nano Amp features the famous iRig analogue interface circuit for iOS. This means you can use iRig Nano Amp to connect your guitar to your iOS device with the included TRRS cable and tap into the tones of AmpliTube iOS - the leading guitar tone studio app featuring gear from the world's top manufacturers like Fender, Orange, MESA/Boogie and more! AmpliTube and iRig Nano Amp gives players a complete mobile tone and recording solution.

With iRig Nano Amp in your gig bag, your amp is always close at hand!
Read more
 2 in stock $41.50
Cat: 650026 Rel: 26 May 17
 
Versatile battery-powered micro amp with built-in iOS interface
Notes: What if you could carry in the palm of your hand a guitar amp that had access to virtually any guitar sound you can imagine? And what if you could drive a 4x12" cab with it with no additional gear needed? Now you can with the new iRig Nano Amp - the first micro guitar amp and interface for the mobile guitarist. iRig Nano Amp is a super-compact battery-powered self-contained micro amp and interface for iOS that you can use by itself, with headphones or even an external speaker cabinet - this power-packed amazing little amp can drive up to a 4x12" guitar cab! But what makes it more versatile than any other micro amp is that it features the iRig circuitry so you can plug your iPhone or iPad into it with the included TRRS cable and tap into the limitless world of AmpliTube guitar tone and more on your iPhone and iPad.

Dual Mode Operation - AMP/DEVICE:
What makes iRig Nano Amp so unique is that you can operate it in two different modes: AMP & DEVICE. In AMP mode it's a standalone amp for impromptu practice anywhere. In DEVICE mode you use it as an interface and amp for your iOS device. Plus, in both modes you can use the built-in speaker or hook up an external speaker cabinet - up to a 4x12" cab - for more volume and tonal clarity. iRig Nano Amp is the most versatile, feature rich micro amp in the market and provides you with outstanding value and performance.

AMP mode:
iRig Nano Amp operates as a straight up guitar amp and features a British tone stack circuit with gain and volume controls for practice on the go. Simply plug in your guitar to the 1/4" guitar input, adjust your volume and gain settings, select the output type NORMAL/BRIGHT and rock out anywhere you happen to be. The British tone circuit delivers sparkling clean tones at lower gain settings and a cascading wave of overdrive when cranking the gain to the upper limits.

DEVICE mode:
iRig Nano Amp is also an interface and output for your iOS device thanks to its integrated iRig circuit. Use the included TRRS cable to hook iRig Nano Amp in DEVICE mode to your iPhone or iPad and plug in to the amazing toneful world of AmpliTube - the ultimate guitar and bass tone studio - to play, practice and record anywhere, any time. This is great for grabbing ideas in the AmpliTube 4-track looper or recording studio, or just practicing with your favourite AmpliTube gear and more. When used in DEVICE mode, the internal tone stack circuit is bypassed and the volume knob controls the overall output of the amp. This lets you hear only the processed signal coming from your iOS device with no additional amp coloration. Also in DEVICE mode, the 1/8" headphone jack is active so you can play/record in the privacy of your own headspace.

Drive a Cab:
iRig Nano Amp features a 1/4" speaker out jack that - get this - can drive up to a 4x12" cabinet. When you plug in, you'll be floored by the volume and tonal definition that iRig Nano Amp provides. You can connect an external cab in both AMP and DEVICE modes giving you the most flexibility of any "micro" amp out there.

Portable versatility:
iRig Nano Amp is compact - it's just slightly larger than an iPhone, fits in any gig bag or the palm of your hand and features a handy "kickstand" for tilting back the unit for better monitoring. Inside, iRig Nano Amp powers a 3" speaker with a 3-watt class A/B power amp. When in Amp mode, you set your overall output volume with the volume control, then dial in just the right amount of saturation and distortion for your playing pleasure.

iRig Nano Amp features a 1/4" guitar input, a 1/4" speaker output, an 1/8" headphone jack, is powered by 3 AA batteries (included) and comes complete with a TRRS cable for connection to an iOS device. It can be used with 3 output monitoring options - with headphones for private practice and recording in DEVICE mode, and with the internal speaker active, or with an external speaker cabinet connected to the 1/4" speaker out in both DEVICE and AMP modes. When used with headphones or an external cab, the internal speaker can be muted with the volume control knob.

Tap into the limitless guitar tone with AmpliTube:
iRig Nano Amp features the famous iRig analogue interface circuit for iOS. This means you can use iRig Nano Amp to connect your guitar to your iOS device with the included TRRS cable and tap into the tones of AmpliTube iOS - the leading guitar tone studio app featuring gear from the world's top manufacturers like Fender, Orange, MESA/Boogie and more! AmpliTube and iRig Nano Amp gives players a complete mobile tone and recording solution.

With iRig Nano Amp in your gig bag, your amp is always close at hand!
Read more
 3 in stock $50.99
Cat: 650025 Rel: 26 May 17
 
Versatile battery-powered micro amp with built-in iOS interface
Notes: What if you could carry in the palm of your hand a guitar amp that had access to virtually any guitar sound you can imagine? And what if you could drive a 4x12" cab with it with no additional gear needed? Now you can with the new iRig Nano Amp - the first micro guitar amp and interface for the mobile guitarist. iRig Nano Amp is a super-compact battery-powered self-contained micro amp and interface for iOS that you can use by itself, with headphones or even an external speaker cabinet - this power-packed amazing little amp can drive up to a 4x12" guitar cab! But what makes it more versatile than any other micro amp is that it features the iRig circuitry so you can plug your iPhone or iPad into it with the included TRRS cable and tap into the limitless world of AmpliTube guitar tone and more on your iPhone and iPad.

Dual Mode Operation - AMP/DEVICE:
What makes iRig Nano Amp so unique is that you can operate it in two different modes: AMP & DEVICE. In AMP mode it's a standalone amp for impromptu practice anywhere. In DEVICE mode you use it as an interface and amp for your iOS device. Plus, in both modes you can use the built-in speaker or hook up an external speaker cabinet - up to a 4x12" cab - for more volume and tonal clarity. iRig Nano Amp is the most versatile, feature rich micro amp in the market and provides you with outstanding value and performance.

AMP mode:
iRig Nano Amp operates as a straight up guitar amp and features a British tone stack circuit with gain and volume controls for practice on the go. Simply plug in your guitar to the 1/4" guitar input, adjust your volume and gain settings, select the output type NORMAL/BRIGHT and rock out anywhere you happen to be. The British tone circuit delivers sparkling clean tones at lower gain settings and a cascading wave of overdrive when cranking the gain to the upper limits.

DEVICE mode:
iRig Nano Amp is also an interface and output for your iOS device thanks to its integrated iRig circuit. Use the included TRRS cable to hook iRig Nano Amp in DEVICE mode to your iPhone or iPad and plug in to the amazing toneful world of AmpliTube - the ultimate guitar and bass tone studio - to play, practice and record anywhere, any time. This is great for grabbing ideas in the AmpliTube 4-track looper or recording studio, or just practicing with your favourite AmpliTube gear and more. When used in DEVICE mode, the internal tone stack circuit is bypassed and the volume knob controls the overall output of the amp. This lets you hear only the processed signal coming from your iOS device with no additional amp coloration. Also in DEVICE mode, the 1/8" headphone jack is active so you can play/record in the privacy of your own headspace.

Drive a Cab:
iRig Nano Amp features a 1/4" speaker out jack that - get this - can drive up to a 4x12" cabinet. When you plug in, you'll be floored by the volume and tonal definition that iRig Nano Amp provides. You can connect an external cab in both AMP and DEVICE modes giving you the most flexibility of any "micro" amp out there.

Portable versatility:
iRig Nano Amp is compact - it's just slightly larger than an iPhone, fits in any gig bag or the palm of your hand and features a handy "kickstand" for tilting back the unit for better monitoring. Inside, iRig Nano Amp powers a 3" speaker with a 3-watt class A/B power amp. When in Amp mode, you set your overall output volume with the volume control, then dial in just the right amount of saturation and distortion for your playing pleasure.

iRig Nano Amp features a 1/4" guitar input, a 1/4" speaker output, an 1/8" headphone jack, is powered by 3 AA batteries (included) and comes complete with a TRRS cable for connection to an iOS device. It can be used with 3 output monitoring options - with headphones for private practice and recording in DEVICE mode, and with the internal speaker active, or with an external speaker cabinet connected to the 1/4" speaker out in both DEVICE and AMP modes. When used with headphones or an external cab, the internal speaker can be muted with the volume control knob.

Tap into the limitless guitar tone with AmpliTube:
iRig Nano Amp features the famous iRig analogue interface circuit for iOS. This means you can use iRig Nano Amp to connect your guitar to your iOS device with the included TRRS cable and tap into the tones of AmpliTube iOS - the leading guitar tone studio app featuring gear from the world's top manufacturers like Fender, Orange, MESA/Boogie and more! AmpliTube and iRig Nano Amp gives players a complete mobile tone and recording solution.

With iRig Nano Amp in your gig bag, your amp is always close at hand!
Read more
 2 in stock $48.82
Cat: 643202 Rel: 15 Mar 17
 
Mini 20 watt guitar practice amplifier - black
Notes: The Johnny Brook 20 Watt Amplifier is an ideal portable solution for any aspiring musician. It is suitable for most Electric and Electro Acoustic Guitars.

This ultra-portable amplifier is big on features: includes Volume Control (treble and bass), (6.5in.) 20 Watt speaker, 6.35 mm Input and 6.35 mm Headphone Output. It can also be used as a music speaker for your MP3 player, phone or laptop.
Read more
 2 in stock $39.05
Cat: 643206 Rel: 15 Mar 17
 
Mini 20 watt guitar practice amplifier - orange
Notes: The Johnny Brook 20 Watt Amplifier is an ideal portable solution for any aspiring musician. It is suitable for most Electric and Electro Acoustic Guitars.

This ultra-portable amplifier is big on features: includes Volume Control (treble and bass), (6.5in.) 20 Watt speaker, 6.35 mm Input and 6.35 mm Headphone Output. It can also be used as a music speaker for your MP3 player, phone or laptop.
Read more
 1 in stock $39.05
Cat: 651370 Rel: 23 Aug 17
 
Battery-powered miniature bass amp with rhythm patterns & effects
Notes: The enormously popular AC1 Rhythm VOX series of miniature amps has been recharged! It has returned as the AC2 RhythmVOX Bass, designed specifically for bass players. The output has doubled from 1W to 2W, further enhancing the amp's sound quality. The high-quality effects and wide selection of rhythm patterns are easy to use and will have you hooked on playing through your AC2. Battery operation is supported, so you can use the amp anywhere. Careful attention has been paid to every detail of these amps, which look so much like a real VOX amp that you'll forget it's a miniature. Whether it's your first amp, a practice or warmup amp for backstage, or as a rhythm box, the AC2 is a charming, yet ferocious unit that's at home in any situation.

The AC2 RhythmVOX Bass gives you three sound variations with different equalizer settings: normal, flat, and scoop. In spite of this unit's compact size, the powerful bass sounds generated by its analog circuitry amply cover the low range. The full complement of controls includes gain, tone, and volume, letting you achieve a complete sonic spectrum from natural bass tones to drive sound.
Read more
 1 in stock $56.86
Cat: 651369 Rel: 23 Aug 17
 
Fully featured mini guitar amp with 3 amp sounds, 5 effects & 81 rhythm patterns
Notes: The enormously popular AC1 Rhythm VOX series of miniature amps has been recharged! It has returned as the AC2 RhythmVOX, designed specifically for your guitar. The output has doubled from 1W to 2W, further enhancing the amp's sound quality. The high-quality effects and wide selection of rhythm patterns are easy to use and will have you hooked on playing through your AC2. Battery operation is supported, so you can use the amp anywhere. Careful attention has been paid to every detail of these amps, which look so much like a real VOX amp that you'll forget it's a miniature. Whether it's your first amp, a practice or warmup amp for backstage, or as a rhythm box, the AC2 is a charming, yet ferocious unit that's at home in any situation.

Designed specifically for guitar, the AC2 RhythmVOX is equipped with three modes that let you switch between three variations of sound: clean, crunch, and lead. With the serious guitar sound that you expect from analog circuitry, these variations cover any playing style or genre. Gain, tone, and volume controls are also provided so that you can shape a sound that suits your taste.
Read more
 1 in stock $59.13
Cat: 637515 Rel: 12 May 17
 
Plug & play guitar amp simulation in pocket-friendly form
Notes: Clean: The ideal choice for fat, boutique inspired clean sounds.

With amPlug 2, the crucial analog circuit has been drastically improved, and each model now provides three modes. Guitar types provide multi-effect functionality, and a rhythm function has been added to the bass type. A foldable plug mechanism that rotates 180 degrees and an auto power-off function are additional features that contribute significantly to improved convenience and ease of use.

The amPlug is the simplest way to get serious sound; occupying virtually no space, it's an ideal choice for any guitarist or bassist.

Plug Directly Into Your Guitar:

The Vox amPlug 2 Guitar Headphone Amp plugs directly into your guitar for authentic amp sounds through your headphones. The high-quality analog design simulates the circuitry of a vacuum tube amp and delivers rich, lead tones that you might not expect from such a compact unit.

Rotating Function:

With the Vox amPlug 2 Guitar Headphone Amp players are able to rotate it in five steps up to 180 degrees for optimum visibility. This innovative design is also compact and easily stored in a guitar case or bag. In addition, this updated model is equipped with an Aux-in jack, which is ideal for practising and connecting an MP3 player for jamming along to music.

Excellent Battery Life:

Unlike the previous model, the new Vox amPlug 2 now features an auto power-off function which automatically turns off by detecting audio signals of up to thirty minutes. This useful function prolongs the battery life, and further enhances the convenience of the amPlug.
Read more
 1 in stock $37.44
Cat: 637518 Rel: 12 May 17
 
Plug & play guitar amp simulation in pocket-friendly form
Notes: Lead: Searing, high gain lead tone that's perfect for solos.

With amPlug 2, the crucial analog circuit has been drastically improved, and each model now provides three modes. Guitar types provide multi-effect functionality, and a rhythm function has been added to the bass type. A foldable plug mechanism that rotates 180 degrees and an auto power-off function are additional features that contribute significantly to improved convenience and ease of use.

The amPlug is the simplest way to get serious sound; occupying virtually no space, it's an ideal choice for any guitarist or bassist.

Plug Directly Into Your Guitar:

The Vox amPlug 2 Guitar Headphone Amp plugs directly into your guitar for authentic amp sounds through your headphones. The high-quality analog design simulates the circuitry of a vacuum tube amp and delivers rich, lead tones that you might not expect from such a compact unit.

Rotating Function:

With the Vox amPlug 2 Guitar Headphone Amp players are able to rotate it in five steps up to 180 degrees for optimum visibility. This innovative design is also compact and easily stored in a guitar case or bag. In addition, this updated model is equipped with an Aux-in jack, which is ideal for practising and connecting an MP3 player for jamming along to music.

Excellent Battery Life:

Unlike the previous model, the new Vox amPlug 2 now features an auto power-off function which automatically turns off by detecting audio signals of up to thirty minutes. This useful function prolongs the battery life, and further enhances the convenience of the amPlug.
Read more
$37.44 SAVE 10%
 5 in stock $33.69
Cat: 555672 Rel: 18 Nov 14
 
10 watt 6.5" speaker solid state combo amp for guitar
Notes: This 10-Watt, 1 x 6.5" combo's eye-catching looks are also classic VOX and include basket-weave, leather-look vinyl, our distinctive diamond grille cloth and, of course, chicken head knobs! Small but all-important details such as gold beading and white piping have also been faithfully reproduced, perfectly recapturing the legendary look of VOX.

The Pathfinder 10's powerful yet always tone-filled 10-Watt output, makes this amp perfect for home practice, backstage warm-up and recording. The Clean/Overdrive switch allows you to change instantly between clean and dirty sounds. With a mere press of this switch you can go from a crystal clear clean sound to our uniquely warm distortion; or from a slightly crunchy bluesy tone to a high-gain, modern-rock roar.

Want to practice late at night without disturbing your neighbours? No problem! Just plug your headphones into the Headphone/Line Out jack and away you go - your sleeping neighbours won't hear a thing because using this jack automatically mutes the amp's speaker! This jack also doubles as a specially filtered Line Out which is perfect for recording your amp without having to worry about setting up any pesky microphones. The Pathfinder 10 also features controls for Gain, Treble, Bass and Volume plus a Clean/Overdrive switch.

TOP PANEL FEATURES:
Input Jacks. This, believe it or not, is where you plug your guitar into the amp!

Gain Control. This adjusts the overall preamp gain of the amplifier. This control can produce a wide variety of killer tones - from clean to crunchy to crazy and all points in-between! What you get all depends on how you set this control and also how you have the Clean/Overdrive Switch (3) set. In both Switch modes - Clean & Overdrive - turning the Gain control down (i.e. counter clockwise) will clean up your sound while cranking it up (i.e. turning it clockwise) will dirty things up. The possibilities are endless.

Clean/Overdrive Switch. As its name suggests, this switch puts the preamp of the Pathfinder 10 in one of two distinctly different modes -Clean (switch "out") or Overdrive (switch "in"). And, as you'd expect, the Overdrive mode has bags more gain than the Clean mode. So, if you want more gain just press this button in and let rip!

Treble Control. This adjusts the treble (high) frequencies in your tone. It can take your sound from soft and round, to bright and cutting, and any point in-between.

Bass Control. This adjusts the bass (low) frequencies in your tone. It can take your sound from warm and light, to dark and heavy and any point in-between.

Volume Control. This determines the overall volume of the amplifier. Setting this control high while keeping the Gain low works well for clean sounds (HINT: make sure the Clean/Overdrive Switch is "out" if you wanna go clean!), while setting the Master Volume lower, engaging the Overdrive mode and turning up the Gain will give you a fat, distorted sound at a lower, "bedroom friendly" volume.

Headphone/Line Out Jack. This dual output carries a specially filtered signal for use with either headphones or for direct connection to a soundboard or recording console. The LINE OUT gives you a good sounding signal for recording or live work without having to mic up the amp. Inserting a jack-plug into this jack will mute the internal speaker.

Power ON/OFF Switch & LED. On/Off switch for mains (AC) power to amplifier. Plus power indicator LED.
Read more
 2 in stock $68.02
Cat: 706287
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


This 10-Watt, 1 x 6.5" combo's eye-catching looks are also classic VOX and include basket-weave, leather-look vinyl, our distinctive diamond grille cloth and, of course, chicken head knobs! Small but all-important details such as gold beading and white piping have also been faithfully reproduced, perfectly recapturing the legendary look of VOX.

The Pathfinder 10's powerful yet always tone-filled 10-Watt output, makes this amp perfect for home practice, backstage warm-up and recording. The Clean/Overdrive switch allows you to change instantly between clean and dirty sounds. With a mere press of this switch you can go from a crystal clear clean sound to our uniquely warm distortion; or from a slightly crunchy bluesy tone to a high-gain, modern-rock roar.

Want to practice late at night without disturbing your neighbours? No problem! Just plug your headphones into the Headphone/Line Out jack and away you go - your sleeping neighbours won't hear a thing because using this jack automatically mutes the amp's speaker! This jack also doubles as a specially filtered Line Out which is perfect for recording your amp without having to worry about setting up any pesky microphones. The Pathfinder 10 also features controls for Gain, Treble, Bass and Volume plus a Clean/Overdrive switch.

TOP PANEL FEATURES:
Input Jacks. This, believe it or not, is where you plug your guitar into the amp!

Gain Control. This adjusts the overall preamp gain of the amplifier. This control can produce a wide variety of killer tones - from clean to crunchy to crazy and all points in-between! What you get all depends on how you set this control and also how you have the Clean/Overdrive Switch (3) set. In both Switch modes - Clean & Overdrive - turning the Gain control down (i.e. counter clockwise) will clean up your sound while cranking it up (i.e. turning it clockwise) will dirty things up. The possibilities are endless.

Clean/Overdrive Switch. As its name suggests, this switch puts the preamp of the Pathfinder 10 in one of two distinctly different modes -Clean (switch "out") or Overdrive (switch "in"). And, as you'd expect, the Overdrive mode has bags more gain than the Clean mode. So, if you want more gain just press this button in and let rip!

Treble Control. This adjusts the treble (high) frequencies in your tone. It can take your sound from soft and round, to bright and cutting, and any point in-between.

Bass Control. This adjusts the bass (low) frequencies in your tone. It can take your sound from warm and light, to dark and heavy and any point in-between.

Volume Control. This determines the overall volume of the amplifier. Setting this control high while keeping the Gain low works well for clean sounds (HINT: make sure the Clean/Overdrive Switch is "out" if you wanna go clean!), while setting the Master Volume lower, engaging the Overdrive mode and turning up the Gain will give you a fat, distorted sound at a lower, "bedroom friendly" volume.

Headphone/Line Out Jack. This dual output carries a specially filtered signal for use with either headphones or for direct connection to a soundboard or recording console. The LINE OUT gives you a good sounding signal for recording or live work without having to mic up the amp. Inserting a jack-plug into this jack will mute the internal speaker.

Power ON/OFF Switch & LED. On/Off switch for mains (AC) power to amplifier. Plus power indicator LED.
Read more
 1 in stock $66.80
Cat: 597443 Rel: 18 Nov 14
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


This 10-Watt, 1 x 6.5" combo's eye-catching looks are also classic VOX and include basket-weave, leather-look vinyl, our distinctive diamond grille cloth and, of course, chicken head knobs! Small but all-important details such as gold beading and white piping have also been faithfully reproduced, perfectly recapturing the legendary look of VOX.

The Pathfinder 10's powerful yet always tone-filled 10-Watt output, makes this amp perfect for home practice, backstage warm-up and recording. The Clean/Overdrive switch allows you to change instantly between clean and dirty sounds. With a mere press of this switch you can go from a crystal clear clean sound to our uniquely warm distortion; or from a slightly crunchy bluesy tone to a high-gain, modern-rock roar.

Want to practice late at night without disturbing your neighbours? No problem! Just plug your headphones into the Headphone/Line Out jack and away you go - your sleeping neighbours won't hear a thing because using this jack automatically mutes the amp's speaker! This jack also doubles as a specially filtered Line Out which is perfect for recording your amp without having to worry about setting up any pesky microphones. The Pathfinder 10 also features controls for Gain, Treble, Bass and Volume plus a Clean/Overdrive switch.

TOP PANEL FEATURES:
Input Jacks. This, believe it or not, is where you plug your guitar into the amp!

Gain Control. This adjusts the overall preamp gain of the amplifier. This control can produce a wide variety of killer tones - from clean to crunchy to crazy and all points in-between! What you get all depends on how you set this control and also how you have the Clean/Overdrive Switch (3) set. In both Switch modes - Clean & Overdrive - turning the Gain control down (i.e. counter clockwise) will clean up your sound while cranking it up (i.e. turning it clockwise) will dirty things up. The possibilities are endless.

Clean/Overdrive Switch. As its name suggests, this switch puts the preamp of the Pathfinder 10 in one of two distinctly different modes -Clean (switch "out") or Overdrive (switch "in"). And, as you'd expect, the Overdrive mode has bags more gain than the Clean mode. So, if you want more gain just press this button in and let rip!

Treble Control. This adjusts the treble (high) frequencies in your tone. It can take your sound from soft and round, to bright and cutting, and any point in-between.

Bass Control. This adjusts the bass (low) frequencies in your tone. It can take your sound from warm and light, to dark and heavy and any point in-between.

Volume Control. This determines the overall volume of the amplifier. Setting this control high while keeping the Gain low works well for clean sounds (HINT: make sure the Clean/Overdrive Switch is "out" if you wanna go clean!), while setting the Master Volume lower, engaging the Overdrive mode and turning up the Gain will give you a fat, distorted sound at a lower, "bedroom friendly" volume.

Headphone/Line Out Jack. This dual output carries a specially filtered signal for use with either headphones or for direct connection to a soundboard or recording console. The LINE OUT gives you a good sounding signal for recording or live work without having to mic up the amp. Inserting a jack-plug into this jack will mute the internal speaker.

Power ON/OFF Switch & LED. On/Off switch for mains (AC) power to amplifier. Plus power indicator LED.
Read more
 1 in stock $76.16
Cat: 663604 Rel: 21 Sep 17
 
Portable mixing headphone amplifier
Notes: Getting the band together or even practicing by yourself isn't always easy. Conflicting schedules, space restrictions, and perhaps most importantly, not bothering your family and neighbours, are just a few of the factors that can hijack a jam session. SesssionCake is the affordable, ultra-portable, and flexible solution for aspiring musicians who don't have the time, the money, or an appropriate space to really cut loose when they practice alone or jam with friends. Connect an iOS device as an effector or to play along with your favourite tunes, or link together up to eight units for a full-blown jam session with your friends or bandmates. No money, no time, no space? No problem-SessionCake has got you covered.

No amp, no cabinet, no pedals... just a guitar or bass, some headphones, and SessionCake SC-01 are all you need for intensive individual practice or a full-blown rehearsal or jam session. Connect up to 8 SessionCakes together to create a fully featured mixing system where everyone can create the mix that works for them. Portable, lightweight, battery powered, and equipped with a Hi-Z input, the SC-01 also features an AUX-in port that allows you to use an iOS device as an effector, or play along with your music library.
Read more
 1 in stock $101.55
Cat: 661538 Rel: 17 Oct 17
 
Octave/Tremolo effects pedal
Notes: The 4ms Nocto Loco is an octave pedal capable of going as low at three octaves down in pitch. It can also function as a tremolo effect with the Pulse and Speed knobs.
Read more
 1 in stock $217.02
4ms Tremulus Lune Pedal (effects pedal)
Cat: 661537 Rel: 03 Oct 17
 
Compact tremolo effect pedal
Notes: - Speed: Rate of the effect, from a steady swell, to a rapid fire arm
- Symmetry: From ramp-up sawtooth, to triangle, to ramp-down (pulse width when Smoothness is at square)
- Depth: Amount of effect from barely a shudder to full tremulation. Can achieve silence to blaring loud squarewave chop
- Spacing: Loud/quiet "balance" waveshaper... Adjusts spacing between volume pulses
- Smoothness: Blend between full on/off squarewave "chop" to smooth buttery sine-tri-round wave
- Gain: Overall boost/cut
Read more
 1 in stock $200.74
Cat: 683891 Rel: 28 Mar 18
 
Fuzz pedal offering additional gain and a variety of experimental sounds
Notes: The AFA Baron Samedi Fuzz pays homage to the legendary Jordan Bosstone, but sounds nothing like one. Additional gain and a very strange tone control add aggression, fullness and bite to the sound. The interactivity of the top three knobs make this a raucous device that yields an entire variety of sounds, from a great vintage fuzz tone to synthier sounds with faux-portamento decay.

Guaranteed to summon harmonics from other worlds, the AFA Baron Samedi encapsulates the vulgarity, the madness and sheer joy of the electric guitar. Whether you're playing mellower brass sounds on a jazz solo from hell, gated faux-bass single-note riffs or all-out scooped mid riffs, this pedal will take every note to the afterlife and back.

Did we just say guitar? For those unafraid to experiment and stand out, the Baron is a devastating effect, live or in the studio, to use on drum machines, synthesisers and bass guitar too.

Hand-built with pride in Bombay, India.
Read more
 1 in stock $195.30
Cat: 683901 Rel: 28 Mar 18
 
Fuzz pedal based on the Shin-ei/Companion Superfuzz FY-6
Notes: The Chemical Burn is a take on a juggernaut of 60s fuzz sound - the Shin-ei/Companion Superfuzz FY-6. Chemical Burn is an almost-faithful reproduction of this classic, with a few modern twists that make it more usable and versatile and add new operation modes to this classic circuit. The basis of operation remains the same.

If you're looking for a subtle fuzz that cleans up well when you back off the volume control, you're clearly in the wrong place.
Read more
 1 in stock $200.73
Cat: 683903 Rel: 28 Mar 18
 
Versatile distortion effects pedal
Notes: Although the Godeater was designed for bass guitar, it might just be the most versatile Animal Factory pedal yet.

With extreme compression and saturation in the low end, this is a very unique circuit that is not a clone of any existing pedal.

The idea behind the Godeater was to be able to run the pedal 100% distorted and have a full, strong bass response without having to dial the clean signal back in.

The Godeater distinguishes between global gain and saturation with two stages of gain control.

The very musical EQ can thin out the sound or go deep into the subs.

From adding a subtle grunt, blending clean and dirty sounds to full doomy chords, this pedal does it all and more.

The extended bass response makes it an ideal choice for downtuned or baritone guitar, but also bass synths and drum machines.
Read more
 2 in stock $244.13
Cat: 683890 Rel: 28 Mar 18
 
Overdrive effects pedal with Gain, Tone & Volume controls
Notes: The Pit Viper is a solid state overdrive which can go from a rather clean boost to a roaring "all controls to 11" sound.

It features controls for Gain, Tone and Volume as well as switches to alter the clipping behaviour.

The cases are made from distressed hand polished aluminium with hand etched graphics, every single one is unique!
Read more
 1 in stock $195.30
Cat: 493805 Rel: 26 Jun 13
 
Analog modelling acoustic guitar preamp with DI recording output
Notes: For an unplugged sound that's rich, loud and electrifying, step on the V Tone Acoustic Driver DI ADI21. This amazing little box is essential for piezo equipped guitars and will make your acoustic guitar sound come to life!

By their very nature, piezo pickups tend to be very bright, with somewhat reduced bass response and warmth. The ADI21 combines the features of an active DI (direct injection) box with our proprietary microphone/tube emulation. If you don't want to use the emulation feature, the ADI21 also functions as a superb active DI box. The blend control allows you to mix the amount of modeled tone with your instrument's normal output. The resulting sound is more natural with smooth saturation, just as if your guitar were being miked.

Armed with an onboard 3 band EQ, with sweepable mids to keep feedback under control, the ADI21 effectively eliminates the harsh harmonics of piezo pickups. The output is laid out on 1/4" TS or balanced gold plated XLR connectors, which can be used to send a low impedance signal to the mixing console or straight to tape. You also get a ground lift switch to eliminate annoying ground loop hum problems. You can power this little lifesaver with a 9V battery or Behringer's PSU-SB DC power supply (not included).
Read more
 1 in stock $24.95
Cat: 493811 Rel: 26 Jul 13
 
Bass guitar amp modeller/DI box effects pedal with tube emulation circuitry
Notes: There are DI boxes - and then there's the V Tone Bass BDI21 - the feature packed analog DI box built especially for bass.

The BDI21 combines the features of an active DI (direct injection) box with our proprietary tube emulation circuitry. It's like having a truckload of vintage tube amps right at your toes! The Blend control allows you to mix the amount of tube emulation you want with your direct bass signal. And if you don't want to use the tube emulation feature, just step on the switch and the ADI21 functions as a superb active DI box.

With its dedicated Drive, Treble, Bass, Level, and Presence dials, the BDI21 DI box goes above and beyond, giving you vintage tube tones for some funked-up slap, gonzo overdrive and everything in-between. You can use the BDI21 as a recording output DI, with tube emulation, or as a standard active DI box, when running in bypass mode. The output is laid out on 1/4" TS or balanced, gold plated XLR connectors. There's also a ground lift switch that eliminates typical ground loop hum problems.

You can power this bad boy with a 9V battery or Behringer's PSU-SB DC power supply (not included).
Read more
 4 in stock $23.60
Cat: 486284 Rel: 04 Apr 13
 
Authentic tube sound overdrive pedal for bass guitar
Notes: Get rich, tube-like distortion, smooth sustain and super-fat tone! Here's an overdrive pedal that supports the entire frequency range of bass guitars, even 5 & 6-stringers. The best part of all, the Bass Overdrive BOD400 was designed specifically for bass, so the bottom-end won't drop out when you pull the trigger.

Read more
 3 in stock $25.23
Cat: 486276 Rel: 20 Oct 14
 
Compressor / limiter pedal with dedicated sustain, level and attack time controls for awesome sound shaping
Notes: Whether it's a million-dollar hook or a soul-wrenching solo, some licks are just begging for the compression power of the Behringer CL9.

By pumping up quieter notes and bringing down the louder ones, this stomp box packages your sound into one smooth, consistent volume.

Dynamics play an important role in music. They help to convey emotion, whether it's a sultry blues solo or the unrelenting gallop of unfettered metal. But uncontrolled dynamics can take all your best intentions and turn them into so much, well - mush. That's where compression comes in, softening loud sounds and boosting low signal levels to keep everything more uniform. So, a compressor's main job is to make every note the same volume.

Ever notice how some strings on your guitar or bass sound louder than others? This is partly due to physics. Strings with lower mass just don't put out as much volume as the heavier ones. When used properly, a compressor makes all of the strings the same volume. Compressors are also great for slap-style bass players, making thumb slaps, string pulls and muted notes all the same volume, for an extremely percussive effect.

Twist the Level to determine this pedal's overall output, adjust Attack to give the front end of every strum and pluck added definition, then dial in the amount of sustain desired. The blue LED tells you when it's on, and the high-quality on/off switch maintains incredible signal integrity in bypass mode. You can power this sound compactor with either a 9 V battery or a DC power supply (not included).

Push the good stuff to center stage with the Compressor/Sustainer CL9.
Read more
 1 in stock $21.68
Cat: 493800 Rel: 14 Jun 13
 
7 band EQ pedal for guitar
Notes: Finding it hard to get the perfect sound from your guitar? Maybe your guitar gets lost in the mix? Do you have major feedback issues with your acoustic?

The problem's not your guitar - you need an equalizer! The Graphic Equalizer EQ700 provides total control over your tone and puts the brakes on annoying feedback, no matter what the performance situation. You can instantly improve the sound of your guitar with a little help from the Behringer EQ700.

With 15dB of available boost or cut per band (that's a lot!), the EQ700's seven frequency bands have been carefully optimised to provide the ultimate tools for EQing the guitar. Of course, to make full use of the EQ700's capabilities, it helps to first understand some basics about the frequency range of your axe.

The EQ700 covers the audio spectrum from below 100Hz to over 6.4KHz, allowing you to effectively cut or boost specific frequencies to help focus your sound. Special attention has been paid to the critical midrange frequencies, which can make or break your tone.
Read more
 4 in stock $21.68
Cat: 493705 Rel: 29 Jul 13
 
Wah wah pedal with optical control and up to +15dB volume boost
Notes: The Hellbabe HB01 is unlike any wah you've ever stepped on, offering a tremendous array of tone sculpting options. You get everything from old school wah to the most up to date sounds, all in one mesmerizing effects pedal. The Hellbabe will add new dimension and depth to your artistic expression.

First of all, the Behringer Hellbabe's heel down range control provides low frequency adjustment that can be swept from 440Hz down to 250Hz, making the HB01 the ideal companion for either guitar or bass. For custom tailoring the toe down frequency range, the Hellbabe features a fine control, allowing you to adjust the frequency sweep as high as 2.2KHz.

It is also possible to dial in a powerful volume boost (up to +15dB), so that when you do step on the HB01, your guitar will rise to the top of the mix. A highly versatile Q control is provided for precise filter shaping and for achieving vocal like effects.

Unlike anything else on the market, the HB01 uses no mechanical pots or switches, which significantly reduces on wear and tear. But that's not all that separates this pedal from the pack; it also features a spring back pedal mechanism with resistance adjustment. And thanks to our ultra bright LED indicators you'll always know when it's on and when the volume boost is activated. You can power this bad boy with a 9V battery or our PSU-SB DC power supply (not included).
Read more
 2 in stock $42.78
Cat: 493731 Rel: 26 Jun 13
 
Guitar distortion effects pedal with dedicated gain, distortion, tone, bottom and level controls
Notes: When you're ready to go beyond the boundaries of brutality, you have to throw some serious weight to get the job done. That's when you break out the Heavy Distortion HD300.

In addition to providing loads of devastating distortion, this little sonic warhead allows you crank up the bottom end and the gain, to lay waste to everything in your path.

With its dedicated gain boost, distortion, tone, bottom and level control, you can dial in a trademark sound all your own. The blue status LED tells you when this pedal is activated, and the rock solid on/off switch maintains outstanding signal integrity in bypass mode.

You can power this behemoth with either a 9 V battery or a PSU-SB DC power supply (not included)
Read more
 1 in stock $21.68
Cat: 493735 Rel: 26 Jul 13
 
Guitar overdrive/distortion effects pedal with dedicated tone, level and drive dials
Notes: Some tunes call for an edgy modern crunch; others call for the classic sound of hot and bothered tubes. Some need a little of both. The Behringer Overdrive/Distortion OD300 has all your bases covered.

With its dedicated overdrive/distortion blend dial, you can turn all the way to the left for pure overdrive, or all the way to the right for straight ahead distortion. In between, you get an infinite amount of options for creating the perfect overdrive/distortion cocktail. And with the dedicated tone, level and drive dials, everything you need to create a signature sound is at your fingertips.

The LED tells you when this pedal is working its magic, and the top quality on/off switch maintains excellent signal integrity in bypass mode.

You can power the OD300 with either a 9V battery, or the optional PSU-SB DC power supply (not included).
Read more
 6 in stock $23.60
Items 2,351 to 2,400 of 2,681 on page 48 of 54
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ALL
«  1  2  3  ...  47  48  49  ...  52  53  54  »

Filter

Back Catalogue: Studio Equipment
Release Date
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now
Close