100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Back Catalogue: Studio Equipment

View:
Options
Items 1,251 to 1,300 of 2,618 on page 26 of 53
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ALL
«  1  2  3  ...  25  26  27  ...  51  52  53  »
Cat: 556038 Rel: 20 Nov 14
 
1/4" jack to 1/4" jack guitar lead
Notes: A high quality professional guitar cable. Double screened, oxygen free, neoprene sheathed lead with heavy duty brass 6.35 mm mono plugs with cable protectors. Bag and Header.
Read more
 1 in stock $5.53
Cat: 607098 Rel: 30 Mar 16
 
Pack to 3 mini-jack to mini-jack cables for syncing Pocket Operators
Notes: Male mini-jack to male mini-jack cables for syncing Pocket Operator units.

Pack of 3
Read more
 2 in stock $19.22
Cat: 595791 Rel: 19 Jan 16
 
Stackable patch cable
Notes: The TipTop Audio Stackcables allow you to stack your cables to give you complex signal flows with greater visibility
Read more
 7 in stock $8.95
Cat: 595783 Rel: 19 Jan 16
 
Stackable patch cable
Notes: The TipTop Audio Stackcables allow you to stack your cables to give you complex signal flows with greater visibility
Read more
 More than 10 in stock $6.31
Cat: 595787 Rel: 19 Jan 16
 
Stackable patch cable
Notes: The TipTop Audio Stackcables allow you to stack your cables to give you complex signal flows with greater visibility
Read more
 9 in stock $6.31
Cat: 595788 Rel: 19 Jan 16
 
Stackable patch cable
Notes: The TipTop Audio Stackcables allow you to stack your cables to give you complex signal flows with greater visibility
Read more
 More than 10 in stock $6.31
Cat: 595789 Rel: 19 Jan 16
 
Stackable patch cable
Notes: The TipTop Audio Stackcables allow you to stack your cables to give you complex signal flows with greater visibility
Read more
 More than 10 in stock $8.95
Cat: 595790 Rel: 19 Jan 16
 
Stackable patch cable
Notes: The TipTop Audio Stackcables allow you to stack your cables to give you complex signal flows with greater visibility
Read more
 8 in stock $6.31
Cat: 642595 Rel: 24 Apr 17
 
Self-powered bright noise cable
Notes: This cable expands every synth without a noise generator but an external audio input and a 5V source at the tip of a socket (e.g. an expression pedal input), and gives you digital noise. Initially the cable had been developed as an expansion for the Moog Little Phatty & Minitaur, but it also works with other synths.

The Hirlostek needs to be provided with 5V voltage - a circuit inside the bigger plug generates a bright digital noise that you can use as an audio or modulation source. The narrower plug carries the noise signal and is to be connected either with an audio input or a CV input.

Read more
 1 in stock $41.07
Cat: 246308 Rel: 20 Nov 06
Notes: AdrenaLinn Guitars is a tour de force of guitar playing, processing and editing by musician/author Craig Anderton. From ambient-friendly arpeggios to soul-ripping sounds for hardcore techno, AdrenaLinn Guitars delivers almost 700MB of fresh, creative, carefully crafted loops. With Roger Linn's innovative AdrenaLinn processor serving as a sonic foundation, each loop takes on rhythmic, animated characteristics that are perfectly at home in dance, pop, hip-hop, and other modern musical styles. The result is a novel integration of synthesis with the human, organic qualities of the guitar. All samples are in AIFF, WAV, REX2 and Acidized WAV formats.
Read more
 2 in stock $7.67
Cat: 270201 Rel: 06 Jun 07
 
Dirty Electro Minimal House & Twisted Nu-Disco Jams
Notes: Electro-House is the ultimate in twisted, filthy and bleepy house-tinged electronica U all expertly recorded in crystal clear 24bit quality. Boasting a disc-busting 1.8 GB worth of loops, hits and jams, Electro-House captures the real essence of the dancefloor, from the captivating groove to the hypnotic tech-funk that defines a genre.
Read more
 1 in stock $27.63
Cat: 450022 Rel: 12 Mar 12
 
Passive audio interface
Notes: The DTI (Dual Transformer/Isolater) is a high quality totally passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100k Ohms.

What further sets the DTI apart from other lesser isolation boxes is its connection versatility, with XLR, 1/4" phone, and RCA type phono connections on all inputs and outputs. This allows it to easily fit into virtually any audio system and be the clean patch point between all types of systems.

Whether you need an interface between a computer based audio workstation and your monitor system, isolation on long cable runs in a fixed installation, isolation of a signal source from your recording equipment, or in many cases, just a safer connection between two audio systems, the DTI can accommodate.

The compact black anodized all aluminum case and it's passive design allow the DTI to provide years of trouble free service in Live Sound, Permanent/Fixed Install, DJ, and virtually any PA application. Its full feature set, rugged construction, and high-end specifications make the DTI the obvious choice.
Read more
 1 in stock $51.59
Cat: 507798 Rel: 01 Jan 90
 
B-STOCK: Box opened, but product is in excellent condition and in perfect working order
 1 in stock $48.43
Cat: 305298 Rel: 15 Mar 08
Notes: The Skytronic gound loop isolator is designed to connect between 2 pieces of audio equipment that have a ground loop problem
Read more
 2 in stock $5.79
Bumper Ground Loop Isolator (silver) (ground loop isolator)
Cat: 418251 Rel: 14 Feb 11
Notes: The Bumper Ground loop isolator is for use in both car, professional and domestic audio systems to reduce the potential difference between 2 grounded products in a system. It comes with fixing points and screws.
Read more
 1 in stock $5.25
Cat: 411779 Rel: 06 Dec 10
 
High-end ground isolator
Notes: The high-end ground loop isolator is designed to connect between 2 pieces of audio equipment that have a ground loop problem.

Read more
 2 in stock $21.03
Cat: 432331 Rel: 02 Aug 11
 
Ground loop isolator
Notes: The Monacor FGA-35 is designed for preventing signal interference and hum loops which may occur when connecting e.g. MP3 players or similar to PC sound cards or laptops.
Read more
 3 in stock $7.16
Cat: 596714 Rel: 25 Jan 16
 
Adobe Premiere Pro Macbook & iMac wireless keyboard cover
Notes: So you love editing in Adobe Premiere Pro CS6 or CC, but lets face it, if you could save tons of extra time on each video editing session and get the same results, wouldn't that be great?

With your new Editors Keys Adobe Premiere Pro cover for your MacBook or iMac Wireless keyboard, your projects will get edited faster because you can spend more time working on your project and less time memorising the program keys.

The Editors Keys Cover for Adobe Premiere Pro includes custom editing buttons for the default keyboard layout for Adobe Premiere Pro, transforming the way you work forever. Utilizing a multi-color printing process, the editing keys are color-coded and heat fused to ensure long lasting durability.

Full protection for your Mac

It's the one thing you're worried about... damaging your MacBook and losing all of those important video projects. Well with the Editors Keys Adobe Premiere Pro Cover, you'll not only get faster editing, but a full protection barrier for your Mac. The covers works well at protecting against dust, food and liquid spills such as hot coffee or tea.

Compatibility

Please note this keyboard cover is designed for Adobe Premiere CS6 and CC.

These new covers fit all 'world' MacBook keyboards. (Including US, UK, Europe and Asia). The covers are made of durable, ultra-thin silicone and perfectly moulded to fit your MacBook Keyboard. They are designed to not slip or slide and have a silky smooth feel that is soft and comfortable to the touch and will not restrict typing.

Change the way you edit forever and Buy Yours Now.

*Photographed laptop & keyboard not included
Read more
 1 in stock $31.07
Cat: 687540 Rel: 26 Jun 13
 
B-STOCK: Box damaged, product unused & in perfect condition
Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Instantly convert your MacBook Pro or Apple Desktop Keyboard into a custom Ableton Live 9 Keyboard. This Keyboard Cover includes custom editing buttons for the default keyboard layout for Ableton Live 9. Magma Keyboard Covers also safeguard your keyboard from dirt, spills, wear and tear.

The covers are produced by the US manufacturer KBcovers and are made of durable, ultra thin silicone and perfectly molded to fit the Apple keyboards. They will not slip or slide. In addition, the covers have a silky smooth feel so they are soft and comfortable to the touch and will not restrict typing.

You can also read the regular letters and commands if you aren't using Ableton Live 9.
Read more
 1 in stock $29.01
Cat: 530955 Rel: 17 Apr 14
 
Soft and ultra-thin silicone keyboard shortcut cover for Logic Pro X software
Notes: Instantly convert your MacBook Pro or Apple Desktop Keyboard into a custom Logic Pro X Keyboard.

This Keyboard Cover includes custom editing buttons for the default keyboard layout for Logic Pro X. MAGMA Keyboard Covers also safeguard your keyboard from dirt, spills, wear and tear. The covers are produced by the US manufacturer KBcovers and are made of durable, ultra-thin silicone and perfectly molded to fit the Apple keyboards. They will not slip or slide.

In addition, the covers have a silky smooth feel so they are soft and comfortable to the touch and will not restrict typing. You can also read the regular letters and commands if you aren't using Logic.
Read more
 1 in stock $42.11
Cat: 696936 Rel: 01 Aug 18
 
Protective cover designed to fit the Akai MPC X sequencer
Notes: Engineered specifically for the MPC X sequencer. Super durable polycarbonate shell offers protection from dust, spillages and accidental impact. Each Decksaver is trimmed precisely to fit, leaving cables in place. Slides straight into a flight case or controller bag, perfect for transportation. Shields delicate controls from damage on the road, at home or in the club.
Read more
 3 in stock $44.22
Cat: 678137 Rel: 27 Feb 18
 
Protective dust cover, custom moulded to fit the Dave Smith Instruments Prophet 6 synthesiser
Notes: The Dave Smith Instruments Prophet-6 cover features Soft-Fit technology, providing extra protection to vulnerable wooden cheek panels that often adorn synthesizers. The tools we use to compose and produce music are dear to our hearts. The studio elements of dust, smoke and liquid have taken many a good analogue synth down over the years. This is where Decksaver steps in. Precision trimmed for perfect fit whilst accommodating cables, the Prophet-6 can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 3 in stock $87.40
Cat: 696935 Rel: 01 Aug 18
 
Protective cover designed to fit the Denon VL12 turntable
Notes: Designed and engineered in the UK specifically for the VL-12 prime turntable. Custom moulded from super durable polycarbonate and finished in a slick smoked/clear hue. Simple push fit design shields tone-arm and other delicate components from accidental damage, whilst leaving cables in place.
Read more
 1 in stock $40.01
Cat: 551850 Rel: 30 Oct 14
 
Protective Decksaver specifically designed to fit Native Instruments Kontrol S8
Notes: Decksaver Pro. Designed and engineered in the UK
Read more
 2 in stock $40.89
Cat: 690741 Rel: 30 Oct 14
 
B-STOCK: Box damaged, product unused & in perfect condition
Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Decksaver Pro. Designed and engineered in the UK
Read more
 1 in stock $33.59
Cat: 696929 Rel: 02 Aug 18
 
Protective cover designed to fit the Pioneer DDJSX, DDJSX2, DDJSX3 & DDJRX
Notes: Custom moulded in the UK to fit the contours of the Pioneer DDJ-SX / DDJ-SX2 / DDJ-SX3 & DDJ-RX DJ Controllers. Designed for the Digital DJ, our super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling DJ. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your controller covered.
Read more
 4 in stock $42.11
Cat: 678139 Rel: 27 Feb 18
 
Protective dust cover, custom moulded to fit the Pioneer Toraiz AS1 controller
Notes: Designed and engineered specifically to fit the contours of the Toraiz AS-1. Super durable polycarbonate shell offers protection from dust, spillages and accidental impact. Each Decksaver is trimmed precisely to fit, leaving cables in place. Slides straight into a flight case or controller bag, perfect for transportation. Shields delicate faders and controls from damage on the road, at home or in the club.
Read more
 2 in stock $31.55
Cat: 690668 Rel: 27 Feb 18
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Designed and engineered specifically to fit the contours of the Toraiz AS-1. Super durable polycarbonate shell offers protection from dust, spillages and accidental impact. Each Decksaver is trimmed precisely to fit, leaving cables in place. Slides straight into a flight case or controller bag, perfect for transportation. Shields delicate faders and controls from damage on the road, at home or in the club.
Read more
 1 in stock $27.09
Cat: 630035 Rel: 21 Oct 16
 
Protective equipment cover specifically designed to fit the Pioneer Toraiz SP16
Notes: Designed and engineered specifically to fit the contours of the Toraiz SP-16. Super durable polycarbonate shell offers protection from dust, spillages and accidental impact. Each Decksaver is trimmed precisely to fit, leaving cables in place. Slides straight into a flight case or controller bag, perfect for transportation. Shields delicate faders and controls from damage on the road, at home or in the club.
Read more
 1 in stock $37.00
Cat: 637908 Rel: 23 Aug 17
 
Protective dust cover, custom moulded to fit the Roland Juno DS-61
Notes: The tools we use to compose and perform music are dear to our hearts. Elements such as smoke, dust and liquid have taken many a good synthesizer down over the years. This is where Decksaver steps in. Precision trimmed for a perfect fit whilst accommodating cables, your Juno-DS61 can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate keys, controls and internal components from damage at home, on the road and on stage.
Read more
 1 in stock $90.55
Cat: 696934 Rel: 02 Aug 18
 
Protective cover designed to fit the Roland SP-404, SP-404A & SP-404SX
Notes: The tools we use to compose and produce music are dear to our hearts. The studio elements of dust, smoke and liquid have taken many a good sampler down over the years. This is where Decksaver steps in. Precision trimmed for perfect fit whilst accommodating cables, the SP-404 can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 3 in stock $28.70
Cat: 696930 Rel: 01 Aug 18
 
Protective cover designed to fit the Roland TR8S Rhythm Performer
Notes: The tools we use to compose and produce music are dear to our hearts. The studio elements of dust, smoke and liquid have taken many a good groovebox down over the years. This is where Decksaver steps in. Precision trimmed for perfect fit whilst accommodating cables, the TR-8S can sit ready for operation. Slides straight into a flight or soft case for maximum protection during transportation. Shields delicate controls and internal components from damage at home, on the road and on stage.
Read more
 4 in stock $30.28
Cat: 678133 Rel: 27 Feb 18
 
Protective dust cover, custom moulded to fit the Softube Console 1 controller
Notes: Engineered specifically for the Softube Console 1. Super durable polycarbonate shell offers protection from dust, spillages and accidental impact. Each Decksaver is trimmed precisely to fit, leaving cables in place. Slides straight into a flight case or controller bag, perfect for transportation. Shields delicate controls from damage on the road, at home or in the club.
Read more
 1 in stock $42.11
Cat: 668385 Rel: 13 Nov 17
 
Dark grey neoprene dust cover
Notes: Fits: Analog Four MKII & Analog Rytm MKII.
Read more
 2 in stock $23.68
ART Dual RDB Interface DI Box (audio/MIDI interface)
Cat: 450016 Rel: 18 Apr 12
 
Dual re-amping direct box
Notes: The Dual RDB is the ideal interface solution for any application where stereo or dual line level signals from recording interfaces, computers, mixers, iPods, consumer audio or video machines need to be connected to XLR microphone or 1/4" instrument level inputs.

The unit has 2 x high quality isolation transformers that prevent ground loops when connecting various systems together.

The Dual RDB accepts 1/4" TRS and XLR line level inputs and outputs mic or instrument levels. The Dual RDB's variable level controls allow volume control to be set at the source rather than in the studio, AV room, audio closet or installation rack. A 20Hz to 20 kHz frequency response ensures the Dual RDB will function transparently with any high quality audio source.

Read more
 2 in stock $70.12
Cat: 450026 Rel: 12 Mar 12
 
Dual channel active direct box, comes with super quality battery
Notes: The DUALXDirect provides 2 x independent high quality active interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance 1/4" and XLR inputs (provided via combo jacks) are buffered and converted by very low noise active electronics into an isolated, balanced, low impedance signal output. The DUALXDirect has an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALXDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.

The input attenuator switches allow for a wide range of signal levels and the input Thru jacks allow for tapping off of your signal chain. The ground lift switches let you totally separate the input and output signal grounds, when appropriate, to isolate 2 systems, thereby reducing hum and ground-loop noise.

The DUALXDirect's active circuitry is powered by phantom voltage from the output connections or by an internal 9V battery, when external power is not available. When powered by a battery, it draws less than 7.5 mA which should provide more than 100 hours of operation with a new battery (alkaline recommended). If phantom power is available, then the DUALXDirect will automatically draw its power from the external source. The power on/off switch lights more dimly when the unit is running off of the battery, lights more brightly when it is running off of phantom power, and is off when the unit is inactive.

The compact black-anodized all aluminum case and it's active design allow the DUALXDirect to provide years of trouble free service in live sound, permanent/fixed install, DJ, and virtually any PA application. It's full feature set, rugged construction, and high-end specifications make the DUALXDirect the obvious choice.

The Art ARTcessories DUALXDirect features

Fully active design
Phantom voltage or 9V battery powered
Converts high-impedance balanced / unbalanced inputs into 600 Ohm balanced outputs
Switchable input attenuation (0, -30 dB)
Switchable ground lift
1/4" TRS / XLR combo connector inputs
XLR connectors for balanced outputs
Rugged extruded aluminum case
Frequency Response: 10 Hz - 100 kHz, i 0.5 dB @ +0 dBu
THD: <.05% (typical)
Dynamic Range: >100 dB (typical)
Channel Separation: > 80 dB (typical)
Maximum Input Level: +4, +34 dBu
Maximum Output Level: +6 dBu (battery powered), +14 dBu (phantom powered)
Input Connections: 1/4" TRS XLR female balanced / unbalanced (2), 470k Ohm
Thru Connections: 1/4" TRS (2)
Output Connections: XLR male balanced (2), <600 Ohm
Input Attenuation: Switchable, (0, -30 dB)
Power Requirements: 9V @ 7.5 mA (battery, alkaline recommended), 18 - 48V DC @ 6.4 mA (phantom power per channel)
Dimensions (DWH mm): 99 x 117 x 47
Weight: 0.38kg
Read more
 1 in stock $53.74
Cat: 450014 Rel: 12 Mar 12
 
2 x passive interfaces let you connect instrument, line or speaker level signals to a mixer or other balanced inputs
Notes: The DUALZDirect provides 2 x independent high quality totally passive interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs through high performance audio isolation transformers. Each of the high impedance single-ended 1/4" inputs is converted by a transformer into an isolated, balanced, low impedance signal output. The DUALZDirect's audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALZDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.

The input attenuator switches allow for a wide range of signal levels and the input Thru jacks allows for tapping off of your signal chain. The ground lift switches let you totally separate the input and output signal grounds, when appropriate, to isolate 2 x systems, thereby reducing hum and ground-loop noise.

What further sets the DUALZDirect apart from other DI boxes are its extended features and versatility. Art have added switchable low pass filters that cut out all very high frequency interference. These Bessel filters on the outputs are placed out of the audio range and are primarily intended to reduce radio frequency interference before it gets into the main system. The filters are also very effective in reducing any digital computer noise artifacts when using the DUALZDirect as an interface between a computer-based audio workstation and your monitors. The pase invert switches, while not normally included with your run of the mill DI box, have been added to allow you to switch signal polarity right at the source. This feature is especially handy when you are combining a direct tap with a microphone feed in the mix.

The compact black-anodized all aluminum case and it's passive design allow the DUALZDirect to provide years of trouble free service in live sound, permanent/fixed Install, DJ, and virtually any PA application. It's full feature set, rugged construction, and high-end specifications make the DUALZDirect the obvious choice.
Read more
 2 in stock $39.89
Cat: 455715 Rel: 11 May 12
 
Passive interface lets you connect instrument, line, or speaker level signals to a mixer or other balanced input thru an audio isolation transformer
Notes: The Zdirect is a high quality totally passive interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input thru a high performance audio isolation transformer. The high impedance single-ended 1/4" input is converted by the transformer into an isolated balanced low impedance signal source. The Zdirect's audio transformer has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output. This gives the Zdirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.

The input attenuator switches allow for a wide range of signal levels and the input thru jack allows for tapping off of your signal chain. The ground lift switch lets you totally separate the input and output signal grounds, when appropriate, to isolate 2 systems, thereby reducing hum and ground-loop noise.

What further sets the Zdirect apart from other DI boxes are its extended features and versatility. ART have added a switchable low pass filter that cuts out all very high frequency interference. This Bessel filter on the output is placed out of the audio range and is primarily intended to reduce radio frequency interference before it gets into the main system. The filter is also very effective in reducing any digital computer noise artifacts when using the Zdirect as an interface between a computer-based audio workstation and your monitors. The phase invert switch, while not normally included with your run of the mill DI box, has been added to allow you to switch signal polarity right at the source. This feature is especially handy when you are combining a direct tap with a microphone feed in the mix.

The compact black anodized all aluminum case and it's passive design allow the Zdirect to provide years of trouble free service in Live Sound, Permanent/Fixed Install, DJ, and virtually any PA application. It's full feature set, rugged construction, and high-end specifications make the Zdirect the obvious choice.
Read more
 2 in stock $33.44
Cat: 599643 Rel: 22 May 17
 
Active DI box with level & impedance matching function & rugged metal chassis
Notes: The DBX Di1 is a compact high-quality active direct injection box. Ideal for both studios and on the road, the Di1 will ensure audio signals reach their intended destination in both a balanced format and free from unwanted noise.

Connect the output from electric guitars, bass amplifiers, keyboards, etc., directly to a console mixer without the use of a microphone.

Built for toughness and reliability, the Di1 has all the features of a fully featured gig-ready workhorse DI unit.
Read more
 1 in stock $51.59
Cat: 697798 Rel: 27 Jul 18
 
Passive Stereo DI Box with MIDAS Transformer & Extended Dynamic Range
Notes: Building on KLARK TEKNIK's storied legacy of highest-quality direct injection devices, the DI 20P PRO DI 2 offers the same high headroom, dynamic response and sonic clarity you have come to expect. DI 20P is ideal for interfacing stereo keyboards, samplers and other electronic musical instruments to mixing consoles, and faithfully reproduces the character of electric and acoustic instruments, allowing far more of the detail of musical performances to be captured. A passive device, the DI 20P does not require any form of external power to complete its mission. Equipped with a custom-built MIDAS transformer and switchable input Pad, DI 20P easily accommodates instruments, line, and even loudspeaker level signals - making it the perfect choice for professional audio and multimedia applications.

Ever since its formation in the 1970's, MIDAS has had a long history of innovation and leadership in the world of audio mixing consoles. Employed by the most famous touring acts and installations world-wide, legendary MIDAS consoles such as the XL4 and Heritage H3000 quickly became industry standards.

MIDAS has earned their impeccable reputation due to their no-compromise approach for audio and build quality and in particular for their Award-winning products which are considered by industry experts as the industries best sounding designs. Building on this legacy, the XL8 and PRO Series of Live Mixing Systems continue this great heritage of Award-winning audio quality.

KLARK TEKNIK is proud to incorporate MIDAS designed transformers for the ultimate in high-quality audio reproduction in both live and studio environments. Find out more about MIDAS amazing legacy by visiting their extensive website.

The ultra-compact DI 20P is built to handle the rigours of life on the road via a thick and rugged aluminium extrusion that protects the electronics. The enclosures road worthiness is further enhanced through the implementation of sturdy rubber corner bumpers.

A custom instrumentation-grade input circuit was designed for the DI 20P using advanced analogue design techniques to create the ideal input impedance match. This innovative approach provides an ultra-low noise, low harmonic and phase distortion input stage with a ruler-flat frequency response that ranges from 20 Hz to 30 kHz (+/- 1 dB).

DI 20P PRO DI 2 features genuine high quality Neutrik XLR and high impedance 1/4" TS connectors to maintain the highest signal integrity. The Input connectors accept unbalanced signals over 1/4" TS cables, with the Thru jacks passing unbalanced 1/4" TS signals to local amps/monitors. The Output XLR jacks send balanced versions of the input signals to your mixing board or other processing device.
Read more
 2 in stock $45.64
Cat: 697794 Rel: 27 Jul 18
 
Passive Stereo DI Box with MIDAS Transformers & Extended Dynamic Range
Notes: Building on KLARK TEKNIK's storied legacy of highest-quality direct injection devices, the DI 22P PRO DI AV 2 offers the same high headroom, dynamic response and sonic clarity you have come to expect. DI 22P combines many of the outstanding features of the DI 20P and DI 10P direct boxes into one powerful tool that should be in every audio engineers kit. The extremely versatile DI 22P accepts dual instrument, line and speaker levels, plus also accommodates MP3, CD players, keyboard or drum sub-mixers, and a variety of other stereo sources, and faithfully reproduces the character of electric and acoustic instruments, allowing far more of the detail of musical performances to be captured. A passive device, the DI 22P does not require any form of external power to complete its mission. Equipped with custom-built MIDAS transformers and switchable input Pads, the DI 22P is the perfect choice for premium-grade professional audio and multimedia applications.

Ever since its formation in the 1970s, MIDAS has had a long history of innovation and leadership in the world of audio mixing consoles. Employed by the most famous touring acts and installations world-wide, legendary MIDAS consoles such as the XL4 and Heritage H3000 quickly became industry standards.

MIDAS has earned their impeccable reputation due to their no-compromise approach for audio and build quality and in particular for their Award-winning products which are considered by industry experts as the industries best sounding designs. Building on this legacy, the XL8 and PRO Series of Live Mixing Systems continue this great heritage of Award-winning audio quality.

KLARK TEKNIK is proud to incorporate MIDAS designed transformers for the ultimate in high-quality audio reproduction in both live and studio environments. Find out more about MIDAS' amazing legacy by visiting their extensive website.

The ultra-compact DI 22P is built to handle the rigours of life on the road via a thick and rugged aluminium extrusion that protects the electronics. The enclosures road worthiness is further enhanced through the implementation of sturdy rubber corner bumpers.

A custom instrumentation-grade input circuit was designed for the DI 22P using advanced analogue design techniques to create the ideal input impedance match. This innovative approach provides an ultra-low noise, low harmonic and phase distortion input stage with a ruler-flat frequency response that ranges from 20 Hz to 30 kHz (+/- 1 dB).

DI 22P PRO DI AV 2 Inputs are: 2 x 1/4" TS; 2 x RCA; and 1 x 1/8" TRS connectors, which can accommodate virtually any type of signal for the utmost in versatility. The genuine Neutrik Output XLR jacks send balanced versions of the input signals to your mixing board or other processing device.
Read more
 5 in stock $45.64
Cat: 697792 Rel: 27 Jul 18
 
Passive 1-In/5-Out Signal Splitter with Extended Dynamic Range
Notes: Building on KLARK TEKNIK's storied legacy of highest-quality signal processing devices, the DS 50 PRO SPLITTER 5 offers the same high headroom, dynamic response and sonic clarity you have come to expect. DS 50 is ideal for routing balanced XLR signals to as many as 5 discrete destinations, including FOH and monitor consoles, active monitor loudspeakers, broadcast mixers, and more. A passive device, the DS 50 does not require any form of external power, making it the perfect solution for a wide range of professional audio and multimedia applications.

A custom instrumentation-grade input circuit was designed for the DS 50 using advanced analogue design techniques to create the ideal input impedance match. This innovative approach provides an ultra-low noise and ultra-linear system with a ruler-flat frequency response that ranges from 20 Hz to 22 kHz (+/- 0.05 dB).

All of the Input and Output connections on the DS 50 feature genuine high quality Neutrik XLR jacks for the ultimate in signal integrity.

The ultra-compact DS 50 is built to handle the rigours of life on the road via a thick and rugged aluminium extrusion that protects the electronics. The enclosures road-worthiness is further enhanced through the implementation of sturdy rubber corner bumpers.

The DS 50 PRO SPLITTER 5 allows you to send identical copies of balanced input signals to up to 5 discrete destinations thanks to its incredible frequency response of 20 Hz to 22 kHz (+/- 0.05 dB) and highly intuitive design - all in a road-ready enclosure that stands ready for your input.
Read more
 1 in stock $39.96
Cat: 677266 Rel: 29 Jun 18
 
DI box featuring active circuitry for ultra-low distortion & noise
Notes: From acoustic guitars to laptops, always sound your best with MDB Series Direct Boxes. Available in four different models, the MDB Series will give you the peace of mind that your sound will faithfully get to your audience the way that you hear it on stage.

Great for active instruments like guitars and basses with active pickups and preamps, the MDB-1A Active DI features increased headroom and distortion-free operation. Featuring a 1/4" high-impedance input and thru with -20db pad plus a Merge switch that turns the Thru jack into a second input, perfect for summing a stereo source to a mono output. The balanced XLR output features switches for Polarity, Low Cut, and Ground Lift. For maximum convenience, the MDB-1A is powered by 48v phantom power.

Premium - without the price tag:
Direct boxes are an essential tool for any stage or studio. They make it easy to get clean, low-noise audio to a mixer no matter what instrument you are using. Available in four versatile models, our ultra-affordable DI's offer the Mackie sound quality that you expect with 'Built-Like-A-Tank' construction for maximum reliability. From acoustic guitars to laptops, be ready for anything with MDB Series direct boxes.

The Perfect Match:
With four models to choose from, you can get the perfect match for your instruments. Acoustic guitars and keyboards are right at home with the MDB-1P and MDB-2P. High output instruments will appreciate the extra headroom in the MDB-1A.

Premium Analog Circuitry:
MDB Series direct boxes offer excellent noise performance and transparency. Whether you are in the studio or performing on stage, your instruments will always sound as good as they do at the source.

'Built-Like-A-Tank':
From the inside out, MDB Series direct boxes are built to last. Thick steel chassis, impact resistant corners, and long-wearing jacks will keep these in your bag for years to come.

Get the best sound from your laptop:
The MDB-USB is the ultimate way to get pristine digital audio from your laptop directly to a mixer or front-of-house in a venue.
Read more
 1 in stock $67.39
Cat: 677264 Rel: 29 Jun 18
 
Passive DI box - ideal for mono sound sources such as guitar & bass, plus many more stage & studio applications
Notes: From acoustic guitars to laptops, always sound your best with MDB Series Direct Boxes. Available in four different models, the MDB Series will give you the peace of mind that your sound will faithfully get to your audience the way that you hear it on stage.

An essential tool for every musician and engineer, the MDB-1P Passive DI has everything you need to adapt unbalanced, high-impedance audio to a balanced, low-impedance output with minimal noise. Featuring a 1/4" high-impedance input and thru with -15db pad and a balanced XLR output with ground lift.

Premium - without the price tag:
Direct boxes are an essential tool for any stage or studio. They make it easy to get clean, low-noise audio to a mixer no matter what instrument you are using. Available in four versatile models, our ultra-affordable DI's offer the Mackie sound quality that you expect with 'Built-Like-A-Tank' construction for maximum reliability. From acoustic guitars to laptops, be ready for anything with MDB Series direct boxes.

The Perfect Match:
With four models to choose from, you can get the perfect match for your instruments. Acoustic guitars and keyboards are right at home with the MDB-1P and MDB-2P. High output instruments will appreciate the extra headroom in the MDB-1A.

Premium Analog Circuitry:
MDB Series direct boxes offer excellent noise performance and transparency. Whether you are in the studio or performing on stage, your instruments will always sound as good as they do at the source.

'Built-Like-A-Tank':
From the inside out, MDB Series direct boxes are built to last. Thick steel chassis, impact resistant corners, and long-wearing jacks will keep these in your bag for years to come.

Get the best sound from your laptop:
The MDB-USB is the ultimate way to get pristine digital audio from your laptop directly to a mixer or front-of-house in a venue.
Read more
 1 in stock $49.48
Cat: 677265 Rel: 29 Jun 18
 
DI box with dual inputs & outputs for stereo sources
Notes: From acoustic guitars to laptops, always sound your best with MDB Series Direct Boxes. Available in four different models, the MDB Series will give you the peace of mind that your sound will faithfully get to your audience the way that you hear it on stage.

Great for stereo sources like keyboards and synthesizers, the MDB-2P is an essential tool for electronic musicians, live sound venues, and recording studios. The MDB-2P Stereo Passive DI features dual 1/4" high-impedance inputs with Thru outputs and -15db pads, and dual low-impedance XLR outputs with ground lift.

Premium - without the price tag:
Direct boxes are an essential tool for any stage or studio. They make it easy to get clean, low-noise audio to a mixer no matter what instrument you are using. Available in four versatile models, our ultra-affordable DI's offer the Mackie sound quality that you expect with 'Built-Like-A-Tank' construction for maximum reliability. From acoustic guitars to laptops, be ready for anything with MDB Series direct boxes.

The Perfect Match:
With four models to choose from, you can get the perfect match for your instruments. Acoustic guitars and keyboards are right at home with the MDB-1P and MDB-2P. High output instruments will appreciate the extra headroom in the MDB-1A.

Premium Analog Circuitry:
MDB Series direct boxes offer excellent noise performance and transparency. Whether you are in the studio or performing on stage, your instruments will always sound as good as they do at the source.

'Built-Like-A-Tank':
From the inside out, MDB Series direct boxes are built to last. Thick steel chassis, impact resistant corners, and long-wearing jacks will keep these in your bag for years to come.

Get the best sound from your laptop:
The MDB-USB is the ultimate way to get pristine digital audio from your laptop directly to a mixer or front-of-house in a venue.
Read more
 1 in stock $69.49
Cat: 677267 Rel: 29 Jun 18
 
Innovative bus-powered DI box
Notes: From acoustic guitars to laptops, always sound your best with MDB Series Direct Boxes. Available in four different models, the MDB Series will give you the peace of mind that your sound will faithfully get to your audience the way that you hear it on stage.

With the bus-powered MDB-USB Stereo DI, the days of relying on your headphone jack to get audio from a computer into analog gear are over. Combining a high-resolution audio interface with a noise and distortion-free stereo DI, MDB-USB converts your digital audio into clean, balanced, stereo output. The MDB-USB also features an output level control, headphone output, and mono sum for maximum versatility. Analog outputs are dual XLR with ground lift.

Premium - without the price tag:
Direct boxes are an essential tool for any stage or studio. They make it easy to get clean, low-noise audio to a mixer no matter what instrument you are using. Available in four versatile models, our ultra-affordable DI's offer the Mackie sound quality that you expect with 'Built-Like-A-Tank' construction for maximum reliability. From acoustic guitars to laptops, be ready for anything with MDB Series direct boxes.

The Perfect Match:
With four models to choose from, you can get the perfect match for your instruments. Acoustic guitars and keyboards are right at home with the MDB-1P and MDB-2P. High output instruments will appreciate the extra headroom in the MDB-1A.

Premium Analog Circuitry:
MDB Series direct boxes offer excellent noise performance and transparency. Whether you are in the studio or performing on stage, your instruments will always sound as good as they do at the source.

'Built-Like-A-Tank':
From the inside out, MDB Series direct boxes are built to last. Thick steel chassis, impact resistant corners, and long-wearing jacks will keep these in your bag for years to come.

Get the best sound from your laptop:
The MDB-USB is the ultimate way to get pristine digital audio from your laptop directly to a mixer or front-of-house in a venue.
Read more
 1 in stock $120.04
Cat: 708927 Rel: 09 Nov 18
 
DI box ideal for use with electronic musical instruments
Notes: The Passive DI Box converts high impedance unbalanced signals such as musical instruments to a low level balanced output signal, eliminating unwanted noise and reducing loss of high frequencies when using long cables. With 1 x 6.35 mm mono socket input and 1 x 6.35 mm link output for connection to an on-stage combo, etc, and XLR socket output. Constructed with a strong metal case for durability, this piece of kit is built for reliable, everyday use.
Read more
 1 in stock $21.05
Cat: 647536 Rel: 28 Apr 17
 
Passive cabinet merger
Notes: The concept behind Palmer's Cab Merger may be very simple, but the unit fills an important gap! Have you ever wanted to connect two guitar cabinets to just one amplifier output? It's quite simple with the PCABM!

In addition, you can choose parallel or series wiring. For instance, two 8 ohm cabinets can be connected for a total load of 4 ohms (parallel) or 16 ohms (in series). The device is entirely passive and does not affect tone in any way.
Read more
 2 in stock $28.66
Cat: 647526 Rel: 28 Apr 17
 
Re-amplification box
Notes: A Reamping-Box is mainly used in studios. It allows you to play back a recorded guitar signal and send it to a guitar amp, where it can again be taken and recorded by the microphone. This way, the recording engineer can experiment with the sound of an instrument and different amplifiers at his leisure.

The DACCAPO box ensures optimal impedance matching and eliminates ground loop hum through the use of a transformer. The signal level to the amplifier can be adjusted with a volume control.
Read more
 2 in stock $70.35
Cat: 647580 Rel: 28 Apr 17
 
Passive DI box with transformer balanced XLR output
Notes: Passive DI box. Jack input with parallel "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals.
Read more
 1 in stock $42.81
Items 1,251 to 1,300 of 2,618 on page 26 of 53
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ALL
«  1  2  3  ...  25  26  27  ...  51  52  53  »

Filter

Back Catalogue: Studio Equipment
Release Date
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now
Close