100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Back Catalogue: Studio Equipment

View:
Options
Items 1,001 to 1,050 of 2,611 on page 21 of 53
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ALL
«  1  2  3  ...  20  21  22  ...  51  52  53  »
Cat: 602540 Rel: 02 Mar 16
 
Professional studio monitor with 8" custom high-efficiency LF woofer & 1" soft-dome "Poke-Resistant" tweeter
Notes: Mixing bass-heavy hiphop or electronic music? Reveal 802 has you covered. Make no mistake, this is the ultimate near-field monitor for Low-End lovers, resting on decades of experience in loudspeaker research.

The custom 8" woofer and 1" tweeter tell you exactly what is going on in your mix through the finely tuned active crossover filter. Combine this with a new 100 watt bi-amp module and you get rock-solid bass at any volume.

Custom tweaked by Tannoy's in-house speaker guru, Dr. Paul Mills, the active cross-over filters of Reveal 802 have absolutely impeccable timing.

This produces the ultimate sweet spot so that you can move around in your workspace without losing the stereo imaging of your mix - as well as invite people to sit in with you during mixing sessions.

If you're anything like us, you're not only working on mixes but also listening to your favorite music! Reveal 802 gives you the ultimate pathway for both.

With the Aux Link, setting up has never been easier. Use the included mini jack cable to plug into your favorite music player and link your monitors for an instant stereo setup - no need for external interfaces

Read more
 1 in stock $207.06
Cat: 550520 Rel: 03 Oct 14
 
Simple to use 24bit/96kHz Digital Recorder with Omnidirectional Microphones
Notes: TASCAM's DR-05 brings high-quality stereo recording to an easy-to-use portable powerhouse with a size and price that anyone can handle. The DR-05 records in MP3 or WAV format - including 96kHz/24-bit high-resolution audio - to microSD or microSDHC media. A pair of all-new microphones handles up to 125dB SPL with the sensitivity to capture every detail. With new recording features like Peak Reduction and Quick Menu, the DR-05 puts album-quality recording in the palm of your hand.

Everything about the DR-05 is designed to get the best quality recordings of your music. A new pair of built-in microphones withstands up to 125dB SPL - the volume of a jet plane from 200 feet away - yet still have the sensitivity to capture every detail of a performance. You can add your own microphone or line-level source through the 1/8" stereo input, including plug-in power for microphones that need it.

Internally, the DR-05's digital and analog circuit boards are built separately to increase noise performance, with a low-impedance design to further decrease hiss. A separate power supply is sent to the A/D and D/A converter for even better audio performance. The result is clean sound quality - over 92dB signal to noise ratio, under 0.05% total harmonic distortion and 20Hz to 40kHz response (-1/+3dB) at 96kHz/24-bit resolution.

The layout of the DR-05 has been revamped to be quick and easy to work with one thumb. Operations like recording, adjusting levels, deleting bad takes and adding markers are just a button press away. Dig deeper to find features like limiting, low cut filtering, a built-in chromatic tuner and more.

One new feature that makes the DR-05 easy to operate is the new Peak Reduction feature. This setting automatically sets your recording level by listening to the input and adjusting for the best level. Unlike Auto Gain settings, this one only goes down to prevent accidental distortion after a period of low level like a break. Peak Recording works in rehearsal mode or in record, so if the performance is louder than the soundcheck you're still safe. Used with the built-in limiter, it's unlikely you'll distort your career-making live recording.

Other classic TASCAM features are included, like Variable Speed Audition to loop and slow down music without changing the pitch - perfect for transcribing or learning new music. A Level Align function can be switched on for playback, to smooth out any sudden volume jumps, and a built-in speaker is also provided. The two AA batteries are enough to power the recorder for 17 1/2 hours, even while recording at CD quality.

For musicians and recordists at any stage of their career, there's no easier way to get great-sounding recordings than Tascam's DR-05.

The "DR-05" is equipped with omnidirectional stereo condenser microphones that can not only record sounds directly in front of the microphones but also record ambient sound from all directions. This is great for capturing the excitement from the audience such as at live events, producing realistic recordings. The recording format is compatible with 24bit/96kHz, which is higher than CD quality.

Proven high sound pressure design that is perfect for loud recordings such as bands or passing trains. It can be used for recoding quiet sound sources such as lectures or for loud sound sources such as rock bands.

The peak reduction function automatically lowers the level when a peak sound is detected and continues recording. The level can be set automatically according to the sound source, so it is easy for anyone to set the optimal level.
The "DR-05" has a total of three different input signal level adjustment functions including a peak reduction function.

The overdubbing function allows for overdub recording while playing a recorded file. This can allow you to record other parts of a musical production such as a guitar solo over a recording made at a rehearsal studio later at home. Overdubbing creates a new file, leaving the original file unaffected, making it easy to rerecord.

Reverb can be added for music demo recordings and overdub recordings to add a more natural resonance. Reverb can also be used during playback, making it possible to express the 'live' feeling at a hall by adding reverb to created music.

Records and pauses automatically. If the input signal level falls below the nominal level for more than 5 seconds during recording, it automatically switches to standby. If the input sound level rises above the nominal level again, recording restarts as a new file. This is useful when you do not want to record unnecessary portions such as lecture intermissions.

If the input signal level falls below the nominal level for more than 5 seconds during recording, it sets a mark when it rises above the nominal level again. This is useful when you want to search for a song position after a recording such as for live recordings. Marks can be used by BWF compatible software.
Read more
 5 in stock $87.76
Cat: 624114 Rel: 11 Oct 16
 
Road-ready, studio-quality 192Khz/24bit compatible linear PCM recorder
Notes: TASCAM's top-of-the-line Handheld Digital Recorder, the DR-100mkIII boasts a signal-to-noise ratio exceeding 100dB, delivering the best audio performance in the history of TASCAM portable stereo recorders. Designed to meet the needs of the most demanding audio designers and engineers, this new model combines robust reliability, an updated user interface and studio quality sonic performance to deliver a truly breath-taking audio experience.

The DR-100mkIII features dual AKM AK4558 converters with VELVET SOUND architecture, providing both high sound quality and low power consumption, achieving a signal-to-noise ratio of 102dB. The DR-100mkIII uses two independent AK4558 ADC converters. By eliminating interference between left and right channels, signal-to-noise ratio is maximized and audio fidelity is improved. In addition, each of those AD converters can work in a Dual ADC mode. The two AD converters work in tandem then combine their results for a 109dB S/N ratio, beating the (already excellent) 102dB S/N ratio achieved when recording in standard mode. Note: As the S/N ratio when recording exceeds the S/N ratio of the entire circuit, data recorded in dual mono ADC mode will be limited to a 102dB S/N ratio when played back on the DR-100mkIII. This does not affect the S/N ratio of the actual file, which is maintained at 109dB S/N.

The XLR/TRS inputs, used to connect external mics, deliver the highest sound quality and lowest noise of any TASCAM Handheld Digital Recorder. HDDA (High Definition Discrete Architecture) mic preamps are also included to maintain a pristine audio signal path throughout. The TASCAM DR-100mkIII is a newly designed microphone housing for the directional mics is based on exhaustive research of previous TASCAM handheld recorders and achieves the perfect marriage of protection and performance. Similarly, the omnidirectional stereo microphone setup features a sound pressure level tolerance of 125dB SPL - able to withstand virtually any audio environment.

The TASCAM DR-100mkIII supports high definition recording at both 96kHz/24bit and 192kHz/24, ensuring that remote recordings achieve the same sonic fidelity as their studio-born counterparts. With a dual battery structure that features a built-in high-capacity lithium-ion battery as well as with hot-swappable AA batteries, operation is possible for extended periods of time and is ready to go when you are. Additionally, the DR-100mkIII can be rapidly charged by connecting an AC adapter and even support USB Bus power from an external battery pack commonly used to charge mobile phones and tablets.

TASCAM's exclusive Dual Level Recording function simultaneously records a secondary backup file at a lower gain level than the primary recording. This safety file, recorded at a 12db lower level protects your recording session from unexpected volume spikes and accidental overload. Marrying light weight with long-term reliability, the TASCAM DR-100mkIII's tough aluminium body ensures many years of trouble-free use. The precision of the built-in clock is crucial when digital recordings made on what device are to be used in conjunction with materials recorded on other devices, such as when combining digital audio and video assets. To ensure stability, the DR-100mkIII utilizes the same Temperature-Compensated Crystal Oscillator (TCXO) used in professional studio master recorders. Moreover, the TCXO is not affected by the temperature of the environment, critical for a portable device which must maintain its precision in support of high-quality recording.

Used in a variety of combinations, depending upon the selected function, the DR-100mkIII features dual AKM AK4558 converters with VELVET SOUND architecture, providing both high sound quality and low power consumption, achieving a signal-to-noise ratio of 102dB. When working on location, decisions must be made quickly and efficiently, and an intuitive and consistent User Interface is critical. By gathering feedback from users of the original DR-100 and the mkII, we have been able to add a variety of usability enhancements designed to streamline workflow and help audio professionals achieve success quickly and efficiently.

The user interface has been designed to maximize visual confirmation, and includes a large LCD screen (double the size of the screen on the DR-100mkII), dedicated status LEDs for features such as record levels and status and easy-to-read legends on the casework. Dedicated hardware controls have been implemented for the most commonly accessed features to enable quick, positive operation in the field. Dual format recording function allows simultaneous recording of both uncompressed WAV(BWF) and MP3 files. This provides the user with instant access to both the original, full resolution master file and a compressed MP3 file (with a much smaller file size) for easy emailing or posting to social media sites.
Read more
 4 in stock $326.72
Cat: 680059 Rel: 11 Oct 16
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


TASCAM's top-of-the-line Handheld Digital Recorder, the DR-100mkIII boasts a signal-to-noise ratio exceeding 100dB, delivering the best audio performance in the history of TASCAM portable stereo recorders. Designed to meet the needs of the most demanding audio designers and engineers, this new model combines robust reliability, an updated user interface and studio quality sonic performance to deliver a truly breath-taking audio experience.

The DR-100mkIII features dual AKM AK4558 converters with VELVET SOUND architecture, providing both high sound quality and low power consumption, achieving a signal-to-noise ratio of 102dB. The DR-100mkIII uses two independent AK4558 ADC converters. By eliminating interference between left and right channels, signal-to-noise ratio is maximized and audio fidelity is improved. In addition, each of those AD converters can work in a Dual ADC mode. The two AD converters work in tandem then combine their results for a 109dB S/N ratio, beating the (already excellent) 102dB S/N ratio achieved when recording in standard mode. Note: As the S/N ratio when recording exceeds the S/N ratio of the entire circuit, data recorded in dual mono ADC mode will be limited to a 102dB S/N ratio when played back on the DR-100mkIII. This does not affect the S/N ratio of the actual file, which is maintained at 109dB S/N.

The XLR/TRS inputs, used to connect external mics, deliver the highest sound quality and lowest noise of any TASCAM Handheld Digital Recorder. HDDA (High Definition Discrete Architecture) mic preamps are also included to maintain a pristine audio signal path throughout. The TASCAM DR-100mkIII is a newly designed microphone housing for the directional mics is based on exhaustive research of previous TASCAM handheld recorders and achieves the perfect marriage of protection and performance. Similarly, the omnidirectional stereo microphone setup features a sound pressure level tolerance of 125dB SPL - able to withstand virtually any audio environment.

The TASCAM DR-100mkIII supports high definition recording at both 96kHz/24bit and 192kHz/24, ensuring that remote recordings achieve the same sonic fidelity as their studio-born counterparts. With a dual battery structure that features a built-in high-capacity lithium-ion battery as well as with hot-swappable AA batteries, operation is possible for extended periods of time and is ready to go when you are. Additionally, the DR-100mkIII can be rapidly charged by connecting an AC adapter and even support USB Bus power from an external battery pack commonly used to charge mobile phones and tablets.

TASCAM's exclusive Dual Level Recording function simultaneously records a secondary backup file at a lower gain level than the primary recording. This safety file, recorded at a 12db lower level protects your recording session from unexpected volume spikes and accidental overload. Marrying light weight with long-term reliability, the TASCAM DR-100mkIII's tough aluminium body ensures many years of trouble-free use. The precision of the built-in clock is crucial when digital recordings made on what device are to be used in conjunction with materials recorded on other devices, such as when combining digital audio and video assets. To ensure stability, the DR-100mkIII utilizes the same Temperature-Compensated Crystal Oscillator (TCXO) used in professional studio master recorders. Moreover, the TCXO is not affected by the temperature of the environment, critical for a portable device which must maintain its precision in support of high-quality recording.

Used in a variety of combinations, depending upon the selected function, the DR-100mkIII features dual AKM AK4558 converters with VELVET SOUND architecture, providing both high sound quality and low power consumption, achieving a signal-to-noise ratio of 102dB. When working on location, decisions must be made quickly and efficiently, and an intuitive and consistent User Interface is critical. By gathering feedback from users of the original DR-100 and the mkII, we have been able to add a variety of usability enhancements designed to streamline workflow and help audio professionals achieve success quickly and efficiently.

The user interface has been designed to maximize visual confirmation, and includes a large LCD screen (double the size of the screen on the DR-100mkII), dedicated status LEDs for features such as record levels and status and easy-to-read legends on the casework. Dedicated hardware controls have been implemented for the most commonly accessed features to enable quick, positive operation in the field. Dual format recording function allows simultaneous recording of both uncompressed WAV(BWF) and MP3 files. This provides the user with instant access to both the original, full resolution master file and a compressed MP3 file (with a much smaller file size) for easy emailing or posting to social media sites.
Read more
 1 in stock $323.73
Cat: 554266 Rel: 06 Feb 15
 
Micro linear PCM recorder for wireless beltpacks with "Dual Recording" feature
Notes: Tascam's DR-10C-series recorders connect to your lavaliere microphone to create a compact recording system that fits on a belt pack. Two versions are available: the DR-10CL for Lectrosonics mics and DR-10CS for Sennheiser microphones. Additionally, option kits are available for Shure (AK-DR10CH) and Sony/RAMSA (AK-DR10CR.)

The DR-10CL & CS recorders have both inputs and outputs, so they can either be used stand-alone or with a wireless transmitter. When used with a transmitter, the DR-10C acts as a backup to protect against wireless dropouts during recording. For lectures or worship services, the DR-10C can record the entire program before it gets to the front of house system. And for events like weddings and reality TV production, the DR-10C is a compact recording system for body mics.

The lightweight DR-10C runs for hours on a single AAA battery. It records to standard microSD media. Recording features include auto-gain and a low-cut filter for simple setup. Its dual recording feature records a safety track of your audio at a lower level, so in case of distortion you have a non-clipped backup. When multiple units are used, an infrared signal can synchronize settings between recorders.

Whether using it as a backup or as a primary recording system, there's nothing else like the Tascam DR-10CL and CS.
Read more
 1 in stock $199.64
Cat: 554271 Rel: 15 Dec 14
 
Compact PCM recorder with XLR connector for use with dynamic microphones
Notes: Tascam's compact DR-10X attaches to a handheld microphone for the ultimate compact news gathering recording system. A captive XLR connector attaches firmly to your microphone, capturing interviews at 48kHz/24-bit Broadcast WAV resolution. Offload recordings through the microUSB connection or by removing the MicroSD card.

The DR-10X has both manual and automatic gain settings, with a low cut filter and limiter to prevent overloads. The Dual Recording mode captures a copy of the audio at a lower level, so if there is distortion you have a backup safety. Recording can begin instantly by holding the record side switch while turning the unit on.

For simple-to-use ENG recording that stays out of the way, Tascam's DR-10X leads the field.
Read more
 1 in stock $159.59
Cat: 548848 Rel: 04 Nov 14
 
Handheld digital recorder with built-in WiFi and stereo condensor microphones - FREE DR Control app for iOS & Android
Notes: The DR-22WL is a streamlined model that has been designed to provide an easy-to-use interface so that anyone will be able to enjoy high-quality linear PCM recording without difficulty. For recording music played primarily on acoustic instruments, including acoustic guitars and wind and string instruments, this model is ideal. With its easy operation and high quality recording, this recorder can also be used for applications other than music, including for recording audio when capturing video with a digital SLR camera and for interviews.

Not only does this handheld recorder meet the demand for recording high-quality audio with ease, it also has advanced Wi-Fi functions for full remote control, streaming playback and file transfer.

Two unidirectional mic units are utilized together for stereo recording in an X-Y format. They are arranged so that their diaphragms overlap in the same axis. X-Y format recording can capture sound with a good stereo image and no sense of emptiness at the center. Since the mic units will not distort even at high volumes, recording with a great sense of nearness is possible even in high-volume situations.

In addition, a shock mount structure is used to hold the mic capsules. This absorbs vibrations effectively even when mounted on a digital SLR camera.

The scene dial has eight preset scenes with different settings. This function automatically makes adjustments according to the situation so all the user needs to do for optimal recording is press the record button. Of course, when "M" (manual) is selected, settings can be adjusted manually. When set to ">", the user can use the play function to adjust the speed of playback, change the pitch and use other features that are perfect for practice.

The bottom of the large 128 x 128 LCD shows the next operations that are necessary according to the current conditions. The 4 function keys can be used to make selections for easy operation. This is a handheld recorder that can be easily mastered.

TASCAM has once again revolutionized handheld recording! The DR-22WL creates its own Wi-Fi network, and a free dedicated app can be used for remote operation without touching the unit. Not only does the app allow recording to be started and stopped, it can also be used to check and adjust input levels from an iOS or Android device. Everything related to recording can be done by Wi-Fi.

Since the Wi-Fi transmission range is about 20m/65 feet, this feature can be used with the recorder in places that are normally out of reach. In addition, audio can be checked by Wi-Fi after recording. The audio quality can be checked through headphones connected to a smartphone. With operation capabilities and flexibility that exceeds infrared remotes - and reliability that approaches that of wired remotes - this handheld recorder allows freedom of placement that far surpasses that of previous models.

The benefits of Wi-Fi are not limited to recording. Audio files can be transmitted via Wi-Fi to smartphones and computers. They can also be uploaded to SoundCloud using a dedicated application. SoundCloud is tightly linked with other social networking services. For example, if a recording is shared to Facebook, it will appear on the user's timeline. By uploading a live recording immediately after performance, audience members could listen to the concert again on their way home.

Even though the DR-22WL is a professional recording device, it also has numerous automatic functions that make capturing high-quality recordings easy for anyone. In addition to automatic recording functions, the unit also has functions that simplify file management. Users can create high-quality recordings without complicated operations.

In addition to recording, this unit also has functions that can be used for music creation. The overdubbing function allows new sounds to be layered over existing recordings. This can be used to add solo parts to karaoke and to create harmonies by recording the same instrument multiple times.

By using the reverb effect, users can create sounds that are even more appealing using just the DR-22WL.
Read more
 1 in stock $128.40
Cat: 437516 Rel: 01 Feb 12
 
4 track digital recorder with 2GB SD card included, SDHC compatability, XLR input & USB conectivity
Notes: The adjustable mics, 4-track recording and extended battery life of the Tascam DR-40 give you the flexibility you need to record tracks anywhere.

The DR-40 recorder captures up to 4 tracks from built-in, high-quality condenser microphones, XLR mic or line inputs. The internal mics are adjustable from XY to AB position, helping you to tailor your recording to the sound of the room. A pair of great-sounding Tascam microphone preamps welcome condenser microphones with phantom power, recording at up to 96 kHz/24bit resolution. It accommodates balanced XLR or 1/4" line inputs using locking Neutrik Combo jacks. The DR-40 accepts SD or SDHC cards up to 32GB, and a 2GB card is included.

Once recorded, play back your takes with EQ and the optional level align feature to avoid volume jumps. A stereo reverb effect is also built-in, as well as a speaker and chromatic tuner. Transfer recordings to computer using the USB 2.0 jack. Other features include overdub mode, variable speed playback, limiting and low cut filter and much more, all with Tascam's simple-to-use interface. No other recorder makes home or live recording as simple as the Tascam DR-40.

Read more
 4 in stock $156.82
Cat: 553188 Rel: 31 Oct 14
 
Portable recording interface specifically designed for use with DSLR cameras
Notes: TASCAM's DR-60DmkII, an update of the award winning DR-60D, is the audio recording solution for on-set filmmakers and videographers. The streamlined design fits perfectly under a DSLR camera rig, without relying on bulky recorders or the limited audio quality of the camera's microphone in. ProSound Network Best of Show The streamlined design fits perfectly under a DSLR camera rig, without relying on bulky recorders or the limited audio quality of the camera's microphone in.

The DR-60DmkII is the next generation of 4-track solid-state recording, based on TASCAM's decades of recording innovation. The upgraded HDDA microphone preamps provide up to 64dB of gain, capturing every nuance of a performance. Up to four channels at a time can be recorded to the internal SD Card, at up to 96kHz/24-bit WAV file resolution. Two of the mic inputs utilize locking XLR connectors with 48V phantom power, the other two use an 1/8" stereo connector for wireless and lavaliere microphones.

A Camera Output sends the mic mix to the camera for later synchronization, and a Camera Input is provided for monitoring playback. An additional headphone out and line out assist the crew during filming. The DR-60DmkII is designed for low-noise operation, including soft touch buttons and dedicated gain controls.

Multiple recording modes are available on the DR-60DmkII. Four-Channel Mode records all four microphone inputs. Dual Recording is an alternate setting, capturing a copy of your audio at a lower level for a distortion-free safety track. Menus and operation are well laid out, owing to decades of innovative recording design.

Reach beyond the limited performance of your camera's audio to capture the other half of your film. At a cost less than competing preamps, the TASCAM DR-60DmkII is the ultimate 4-track recorder designed for filmmakers, television, live events and web broadcast.
Read more
 2 in stock $168.90
Notes: The adjustable mics, 4-track recording and extended battery life of the Tascam DR-40 give you the flexibility you need to record tracks anywhere.

The DR-40 recorder captures up to 4 tracks from built-in, high-quality condenser microphones, XLR mic or line inputs. The internal mics are adjustable from XY to AB position, helping you to tailor your recording to the sound of the room. A pair of great-sounding Tascam microphone preamps welcome condenser microphones with phantom power, recording at up to 96 kHz/24bit resolution. It accommodates balanced XLR or 1/4" line inputs using locking Neutrik Combo jacks. The DR-40 accepts SD or SDHC cards up to 32GB, and a 2GB card is included.

Once recorded, play back your takes with EQ and the optional level align feature to avoid volume jumps. A stereo reverb effect is also built-in, as well as a speaker and chromatic tuner. Transfer recordings to computer using the USB 2.0 jack. Other features include overdub mode, variable speed playback, limiting and low cut filter and much more, all with Tascam's simple-to-use interface. No other recorder makes home or live recording as simple as the Tascam DR-40.

Read more
 1 in stock $200.83
Cat: 646408 Rel: 22 Jun 17
 
Two-channel input/output interface card for SS-R250N & SS-CDR250N audio recorders
Notes: The Tascam IF-DA2 Dante Audio Interface Card is an optional interface card that supports Dante two-channel input and output. It is compatible with SS-R250N/CDR250N audio recorder.

With the Tascam IF-DA Dante interface, you can equip your SS-CDR250N or SS-R250N solid-state recorder with Dante functionality so that you can stream audio in top-quality over your LAN network.
Read more
 1 in stock $271.02
Cat: 615405 Rel: 25 Oct 16
 
Audio interface for iPad, Mac OS & Windows - includes free license for Cubasis LE
Notes: Music. There's an app for that:
Once viewed as a toe-tapping way to kill a few minutes of spare time, music apps for iPhone and iPad have matured into truly powerful outlets for creative expression. And with the TASCAM iXR, you can now seamlessly integrate your iOS device into your audio arsenal with all of the connectivity, quality and reliability your music demands. Uniquely designed to bring mobile devices into the world of professional audio, the iXR is a full featured iPhone/iPad/Mac/PC audio interface featuring direct connection to iPhone and iPad via the Lightning Connector, dual microphone preamps, MIDI in and out and balanced stereo outputs. Thinner than any other XLR-equipped audio interface on the market, this backpack-approved powerhouse unleashes the true potential of your smartphone or tablet.

The iPad takes centre stage:
Taking full advantage of the multi-touch screen and the built-in accelerometer, iOS app developers are constantly creating revolutionary musical instruments that marry gesture and sound generation like never before. And with the TASCAM iXR, these instruments can finally explore their full potential. No longer does the iPad wielding soloist need to rely on mini-plugs and adapters; the iXR makes a direct digital connection via the lightning port and uses professional quality digital to analog converters and balanced output to deliver a clean, clear signal to the recording or live sound engineer.

A recording studio at your fingertips:
Whether you're using a simple recording app like Garage Band, or working with a full-featured DAW, the TASCAM iXR can turn any location into a professional recording space. Sporting dual XLR 1/4" Combo jacks and TASCAM's unique HDDA microphone preamps, iXR allows you to easily connect any guitar, bass, keyboard or studio microphone with stellar results, which seamlessly combine with virtual instruments performed by your iPhone or iPad. Add in latency-free monitoring, a powerful headphone amp and balanced stereo outputs and you have a truly pro-quality recording rig that can easily fit into any messenger bag or backpack. And when you get home, iXR connects directly to your Mac or PC to deliver the quality and reliability that you've come to expect from a TASCAM audio interface.

It's all about your jam:
Turn any room into a personal Karaoke club with the TASCAM iXR. With over 100 Karaoke apps and thousands of songs available, the iPad is the perfect sing-along band leader. And with iXR, you'll be up and crooning in moments. Plug in your microphones, connect your iPad and stereo output to your PA or speaker system and you are good to go. All that's left to do is to pick out your favourite song and get ready to start signing autographs.

Everything you need:
The iXR includes a free license for Cubasis LE, a full-featured multitrack recording system for your iPad. Record vocals, play with software synthesizers, and mix with plug-in effects for a complete production all from your tablet. When you're ready to take your production to the next level, the iXR also includes Cubase LE for MacOS and Windows. Also available is the iXR TRACKPACK, which includes a TASCAM TM-60 microphone, desktop stand, cable, and vinyl protective cover for the iXR.
Read more
 2 in stock $141.01
Cat: 437520 Rel: 03 Feb 12
 
Mic & guitar interface for iPad/iPhone/iPod Touch
Notes: The Tascam iXZ iPhone Audio Interface turns your iPhone, iPad or iPod Touch into a recording studio.

To turn an iPhone into a portable practice, songwriting or live recording rig, it's tough to beat the Tascam iXZ. Plug in a microphone, guitar or bass to interact with the latest guitar amp, sampling, recording and DJ apps.

The Tascam iXZ provides phantom power for condenser microphones. An input setting sets the gain and there's a headphone output to monitor from your iOS device.

You can also use the Tascam iXZ for guitar practice, songwriting, rehearsal recording, Sound Effects collecting and many more.
Read more
MRP:$64.53 SAVE 23%
 2 in stock $49.93
Cat: 681412 Rel: 06 Jun 18
 
Powerful multi-channel, multi-zone mixer housed in a compact 2U design
Notes: The TASCAM MZ-223 offers versatile multi-zone audio routing, mixing, and segregation of several audio sources simultaneously. Source content can include music, spoken word (microphone), phonograph, and more and are easily controlled via familiar sliders and assignment controls on the front panel. Designed for easy integration in virtually any system, the TASCAM MZ-223 is ideal for small format install applications such as moderate sized hotels, restaurants, meeting rooms, schools, or any situation that demands independently routed audio.

Flexible I/O:

The MZ-223 allows multiple audio sources to be mixed, segregated, and routed to three (3) independent zones or destinations using familiar volume sliders and assignment buttons. Input signals can be inserted via five (5) audio channels, each consisting of two (2) sets of unbalanced RCA-type stereo pairs. A total of ten (10) sets of RCA-type inputs are provided. Channels one and two can be set to accommodate phono-level signals for use with a turntable. In addition, located conveniently on the front panel, two mic-compatible XLR inputs are available.

Multiple Zone Outputs:

The independent three-zone outputs each have a combination of balanced professional XLR or RCA unbalanced configurations for long runs or connection to common residential power amplifiers or speakers. This flexibility, for example, allows music to be routed to zone one, ambient noise or natural sounds to zone two, a separate music track or a voice announcement can be routed to zone three, while the convenient "talkover" function will automatically lower any mixed channel source so the microphone can be heard while speaking.

Easy, Immediate Control:

Familiar volume sliders, routing switches/buttons, EQ knobs, and mute buttons for the microphones make the MZ-223 simple and fast to operate and set up. There is even a master recording stereo output, which can send audio to an external recorder which makes event capturing easy. The TASCAM MZ-223 delivers simple operation and maximum audio routing flexibility, all in a compact, affordable package.
Read more
 4 in stock $385.19
Cat: 681410 Rel: 06 Jun 18
 
Powerful multi-channel, multi-zone mixer in a compact 3U rack mount design
Notes: Designed for permanent installation, the TASCAM MZ-372 offers versatile routing, mixing, and control of multiple audio sources in an attractive easy-to-operate 3U package. For maximum flexibility, source content can include music, spoken word (microphone), turntable, and more - all easily controlled via familiar sliders and assignment controls.

Flexible I/O:

The MZ-372 allows multiple audio sources (19 total) to be mixed, muted, and routed to two (2) redundant outputs, controlled by familiar volume sliders and assignment buttons. Input signals can be inserted via six (6) audio channels, each consisting of two (2) sets of unbalanced RCA-type stereo pairs, and six (6) XLR inputs for a total of twelve (12) sets of RCA-type inputs and six (6) XLR inputs. In addition, channels 2/3/4 can be set to accommodate phono-level signals for use with a turntable. Lastly, and located conveniently on the front panel, one additional XLR input is available driving a studio quality mic preamp and ducking circuit for easy voiceover and announcement work.

Multiple Zone Outputs:

Twin outputs each feature a combination of balanced XLR or RCA unbalanced connectors for easy integration into virtually any audio system. This flexibility allows combinations of microphones, CD/DVD/Blu-ray players, instruments - or any other audio source - to be selected or muted, and sent simultaneously to the dual outputs, each with its own volume control. Finally, the convenient "talkover" function will automatically lower any mixed channel source, so the microphone connected to the front panel can easily be can be heard in whichever zones you choose.

Easy, Immediate Control:

Familiar volume sliders, switches/buttons, EQ knobs, and mute buttons make the MZ-372 simple and fast to operate and set up. There is even a master recording stereo output, which can send audio to an external recorder which makes event or music performance capturing easy. The Booth outputs provide another stereo feed with independent control for additional monitoring.
Read more
 5 in stock $481.77
Cat: 646407 Rel: 21 Jun 17
 
Remote control for SSR250N & SSCDR250N
Notes: With the Tascam RC-SS150, you can control your SS-CDR250N or SS-R250N recorder remotely. The remote features twelve virtually-silent flash buttons and an impressive LCD display that helps you keep a clear overview by providing information like file names, time, and meter levels. With the remote, you can save up eight pages of sounds, giving you a total of 96 tracks! The RC-SS150 is powered directly from the SS-SCR250N or SS-R250N recorder by connecting it to the RS-232C port on the back.
Read more
 1 in stock $364.63
Cat: 638675 Rel: 06 Feb 17
 
Condenser microphone with large gold-plated diaphragm - includes suspension shock mount, soft case & hard case
Notes: The TM-180 is a large-diaphragm condenser microphone that brings warmth and brightness to your home or project studio recordings. It offers a wide frequency response for precise and smooth reproduction of vocals, acoustic string instruments, brass instruments and other sound sources.

A switchable low-cut filter allows you to add clarity by reducing the amount of unwanted low-frequency sounds or to compensate for the proximity effect in close miking. There is also a switchable level attenuation that reduces the risk of distortion caused by excessively loud sounds. And the cardioid directivity pattern enables the TM-180 to pick up the intended source while rejecting off-axis sounds.

The TM-180 is a condenser microphone opposed to dynamic microphones which are usually being used in live performances. Unlike dynamic mics, a condenser mic does not need a relatively heavy magnet and voice coil to convert acoustic waves into electrical signals. Instead, it uses a diaphragm coupled to an electrical condenser where vibrations are converted to changes in capacitance, realising a lightweight structure that helps to create a wider and smoother frequency response. To derive a signal from the changes in capacitance, electrical power is required.

Condenser microphones are largely divided into two categories according to the size of diaphragm. While small-diaphragm mics are more robust and have a very even frequency response, large-diaphragm mics are known for low noise, they have higher sensitivity and can handle higher sound pressure levels. Large-diaphragm microphones are often used for vocals as they can help to create a distinctive sound due to their warm colouration.

With its 34-mm gold-plated diaphragm, the TM-180 offers the typical warm and bright sound of large-diaphragm microphones with a smoothly increased high-end presence.

The polar pattern of a microphone shows how well the mic picks up the sound from different directions (directivity). The TM-180 has a unidirectional, or cardioid, pattern. This type of directivity is ideal for vocals and other single sound sources because it mainly picks up the sound from the front and reduces off-axis sounds from the sides and rear.

The TM-180 is equipped with a switchable low-cut filter and a second switch to reduce the microphone's sensitivity. Use the low-cut filter (also called high-pass filter) to add clarity to your sound by reducing the amount of low frequencies. When you're close to the mic while singing or speaking, for instance, your voice may sound too rich due to the so-called proximity effect. Using the low-cut filter can compensate part of that effect. When recording very loud sounds like brass instruments or very powerful voices, you can set the level attenuation switch to -10 dB to avoid distortion.

Since a large-diaphragm microphone is sensitive against structure-borne noise, the TM-180 comes with a suspension shockmount that minimises vibrations from the mic stand. A soft bag is also included to protect the mic when not in use and a hard case allows you to safely carry your mic set to a different location.
Read more
 1 in stock $145.96
Cat: 638677 Rel: 06 Feb 17
 
Condenser microphone with large gold-plated diaphragm - includes suspension shockmount, pop filter & flight case
Notes: The TM-280 is the top model in the Tascam microphone series offering rich, warm and bright sound with a low noise level. Its wide frequency response with a slightly enhanced high end is ideal for precise and smooth reproduction of vocals, acoustic string instruments, wind instruments and other sound sources in your home or project studio.

A switchable low-cut filter allows you to add clarity by reducing the amount of unwanted low-frequency sounds or to compensate for the proximity effect in close miking. There is also a switchable level attenuation that reduces the risk of distortion caused by excessively loud sounds. And the cardioid directivity pattern enables the TM-280 to pick up the intended source while rejecting off-axis sounds.

The TM-280 is a condenser microphone opposed to dynamic microphones which are usually being used in live performances. Unlike dynamic mics, a condenser mic does not need a relatively heavy magnet and voice coil to convert acoustic waves into electrical signals. Instead, it uses a diaphragm coupled to an electrical condenser where vibrations are converted to changes in capacitance, realising a lightweight structure that helps to create a wider and smoother frequency response. To derive a signal from the changes in capacitance, electrical power is required.

Condenser microphones are largely divided into two categories according to the size of diaphragm. While small-diaphragm mics are more robust and have a very even frequency response, large-diaphragm mics are known for low noise, they have higher sensitivity and can handle higher sound pressure levels. Large-diaphragm microphones are often used for vocals as they can help to create a distinctive sound due to their warm colouration.

With its 34-mm gold-plated diaphragm, the TM-280 offers the typical warm and bright sound of large-diaphragm microphones with a smoothly increased high-end presence.

Tascam TM-280 The polar pattern of a microphone shows how well the mic picks up the sound from different directions (directivity). The TM-280 has a unidirectional, or cardioid, pattern. This type of directivity is ideal for vocals and other single sound sources because it mainly picks up the sound from the front and reduces off-axis sounds from the sides and rear.

The circuit in the TM-280 is made of selected discrete electronic components that lead to an overall signal-to-noise ratio of 80 dB. When connected to a Tascam HDDA mic preamp (as used in the US-2x2/US-4x4), for instance, this means you can turn up the input gain and still have a low noise level even when you're not singing or playing.

The TM-280 is equipped with a switchable low-cut filter and a second switch to reduce the microphone's sensitivity. Use the low-cut filter (also called high-pass filter) to add clarity to your sound by reducing the amount of low frequencies. When you're close to the mic while singing or speaking, for instance, your voice may sound too rich due to the so-called proximity effect. Using the low-cut filter can compensate part of that effect. When recording very loud sounds like brass instruments or very powerful voices, you can set the level attenuation switch to -10 dB to avoid distortion.

Since a large-diaphragm microphone is sensitive against structure-borne noise, the TM-280 comes with a professional suspension shockmount that holds the mic while minimising vibrations from the mic stand. Also included is a pop filter that reduces plosives when recording vocals. The filter can be attached to the suspension. And not least, a sturdy flight case allows you to safely carry your mic set to a different location.
Read more
 1 in stock $233.88
Tascam TM80 Condenser Microphone (condenser microphone)
Cat: 605084 Rel: 29 Aug 17
 
Condenser microphone featuring 18mm aluminium diaphragm - designed for home recording
Notes: TASCAM's TM-80 is a condenser microphone designed and priced for home recording. The condenser mic features an 18mm aluminium diaphragm with a cardioid pickup pattern that sounds great on anything from vocals to acoustic instruments. Internal circuitry is optimized to reduce noise and distortion while retaining rich, full sound quality.

Included with the TM-80 are a tabletop stand, six-foot XLR cable, and a elastic shockmount to reduce rumble and noise during recording. Priced less than many dynamic microphones, the TM-80 is a must-have for any size studio.
Read more
 1 in stock $61.51
Cat: 554444 Rel: 05 Feb 15
 
Rackmountable USB audio/MIDI interface with ultra-HDDA (High Definition Discrete Architecture) mic preamps
Notes: The TASCAM US-16x08 captures 16 mic and line inputs to your computer with clear sound quality and advanced features to manage big sessions. Eight Ultra-HDDA microphone preamps deliver the cleanest and quietest operation in their class while delivering up to 56dB of gain. An additional eight line inputs are provided, two of them switchable to instrument level for direct guitar or bass recording. Eight balanced line outputs are also available, two with a level control on the front panel for monitoring.

Built into the US-16x08 is a DSP Mixer for low-latency digital mixing. Each channel has four-band EQ and compression for polished-sounding monitor mixes. In addition to interface mode, the US-16x08 can be used stand alone as a standalone mic preamp. Mac and Windows drivers are provided, as well as USB Class Compliant 2.0 drivers for tablets like Apple's iPad. MIDI input and output are also available on the rear panel.

Whether using the ergonomically-designed angled desktop stand or mounting with the included rack ears, the US-16x08 includes analog I/O for almost any music recording application.

TASCAM's own Ultra-HDDA mic preamps are the cleanest, quietest, and best-sounding from any interface in their range. A gain range of 56dB makes them ideal for any type of mic - dynamic, condenser, or ribbon. With preamp performance well beyond any interfaces in their price range, the Ultra-HDDA preamps on the US-16x08 makes your tracks sound like a record.

TASCAM's Ultra-HDDA (High Definition Discrete Architecture) mic preamp design is based on discrete components, just like classic professional gear. They achieve an incredible EIN rating of -125 dBu, meaning their noise level is practically below the range of hearing. Other impressive specs include a signal-to-noise ratio of 100 dB, out-speccing anything in its price range. But instead of judging the design merely by test measurments, key components were selected following extensive listening tests.

The first two channels can be switched to direct guitar inputs. They're ideal for direct recording of electric and acoustic guitar and bass without the need for a preamp. Use them with amp modeling software, like the TH2 effect included with SONAR X3. (Guitar effect plug-ins sold separately.)

The Ultra-HDDA mic preamps and line inputs offer 20dB of headroom for distortion-free recordings of percussive, high SPL instruments like drum tracks.

Eight XLR mic inputs and eight TRS inputs can be used simultaneously for 16-track live recordings. Capture every detail of live performances or rehearsals for later mixdown.

The eight XLR mic inputs have switchable +48V phantom power to use up to 8 condenser mics at the same time. The two front panel TRS line inputs are switchable between instrument level and line level input with adjustable gain. An additional six TRS line ins on the rear of the unit are switchable between -10dB and +4dB. All of the jacks support balanced or unbalanced 1/4" signals.

When powered on with out a USB connection, the US-16x08 functions as an 8-channel microphone preamp. Mics pass through the Ultra-HDDA preamps to the eight balanced line outputs on the rear panel. Use the interface to add additional high-quality mic inputs to a mixer an another audio interface.

Digital processing features like the DSP Monitor Mixer and advanced USB drivers make sessions with the US-16x08 comfortable for the musicians and engineer. The DSP Mixer includes processing for a polished-sounding headphone mix without latency delay from your DAW software, fueled by a Blackfin DSP processor. And new drivers, re-written from the ground up, provide beter compatibility and performance on Mac, Windows and iPad recording systems.

The converters and electronics on the US-16x08 allow you to record at audio resolutions up to 96kHz/24-bit for detailed acoustic productions. No matter what your session's sample rate is set for, the high-quality analog and digital design make your recordings sound their best.

The US-16x08 uses USB 2.0 to connect to your computer, found on nearly every computer manufactured in the last 10 years. Simply connect the interface to any available USB port. USB 2.0 provides plenty of data bandwidth, even when recording 16 channels at 96kHz/24-bit. The US-16x08 will also work with USB 3.0 jacks on your computer.

Powered by an Analog Devices BlackFin DSP processor, the US-16x08 includes an advanced digital mixer for monitor mixing. Each input includes 4-band EQ, a low-cut filer, and compressor. The DSP mixer can store up to 10 snapshots as scenes - making it easy to recall mixer settings. An additional tab opens a digital patchbay to route signals to any output.
Read more
 1 in stock $249.37
Cat: 623478 Rel: 02 Sep 16
 
Professional quality audio interface with built-in microphone and effects
Notes: The TASCAM MiNiSTUDIO Personal US-32 features a built-in microphone and a combo XLR mic/balanced 14-inch TRS line input with high-quality mic preamp and 48V phantom power. A 1/8-inch input can connect to a smartphone, tablet, or other consumer audio device so you can fly in pre-recorded music and dialog. Separate headphone and headset/mic connections are also available.

You talkin' to me:
At the heart of every Podcast and online broadcast lies the desire to communicate. And more often than not, this communication takes the form of the human voice...and TASCAM knows a thing or two about recording the human voice. Central to the MiNiSTUDIO Personal is an XLR/combo mic/line connector and a professional quality microphone preamp. Built-in phantom power allows you to quickly and easily connect your favourite dynamic or condenser microphone...or not... For the ultimate in plug and play convenience, the MiNiSTUDIO Personal features a built-in microphone, so you're ready to talk the talk right out of the box. Simply press the ON AIR button and go to town. And to top it all off, the MiNiSTUDIO Personal features a 4-band parametric EQ, adjustable on-board compression and a digital reverb effect with a convenient front panel depth control.

Have an effect:
Designed to bring an extra dimension to your podcasts and live streaming, the TASCAM MiNiSTUDIO features three assignable PON sound effect buttons. Use the included bell, buzzer and applause effects or apply your own .wav or .mp3 files for a completely customized experience. You can also set each velocity sensitive PON button to act as a one-shot sound effect, to only play while you press or to loop as long as you hold the button down. Why should the morning DJ's have all the fun?

Find your voice:
Disguise your voice, fool your fans! Perhaps the most extreme feature of the MiNiSTUDIO Personal is the Voice Effects option. Simply pressing this innocent little button will instantly transform your voice in any one of a number of amazing and amusing ways. Pitch your voice up into cartoon mouse territory or pitch it down like you've joined the Dark Side. Add a spacey Echo, wobbly Chopper or go old school with the Walki-talkie-approved Radio effect. Voice Effects: crazy, wacky and a whole lot of fun.

Become an expert:
In addition to the default Easy mode of the TASCAM MiNiSTUDIO software panel is an Expert mode that can be accessed by selecting the tab along the top of the window. This exposes a more comprehensive set of controls that enable you to fine tune EQ, compression and reverb settings as well as customize the behaviour of the PON sound effect buttons and the various Voice Effect options. Don't be fooled by the friendly face of the MiNiSTUDIO - underneath the shiny exterior lies a truly professional tool that proudly carries the TASCAM name.

Your audience hears what you hear:
You talk. You play music. You play games. You fire off PON sound effects and bathe your voice in the mysterious fog of a reverberant hallway. In short, you create an immersive soundscape that you want to share with your listeners. To make this dream a reality, the MiNiSTUDIO Personal US-32 supports TASCAM's unique Broadcast architecture that seamlessly mixes your voice and effects with any and all audio produced by your PC or Laptop.
Read more
 1 in stock $111.23
Cat: 605082 Rel: 29 Aug 17
 
2-way powered monitors featuring 3'' woofer with rear panel functionality
Notes: TASCAM's VL-S3 bring great-sounding compact studio monitoring to the price of a set of headphones. The 2-way powered monitors include a 3" woofer, and rear ported design packs a surprising punch.

A pair of RCA inputs accept any line-level input, and a stereo 1/4" to RCA cable is included. Also available is a 1/8" stereo mini jack for playing from smartphones or MP3 players.

The efficient 14W per side stereo power amplifier drives the two monitors. The compact, ported cabinets fit almost anywhere. Ideal for home studios, dorm rooms, or video editing suites, the VL-S3 is an affordable solution for great-sounding mixes.

Compact 4.5" x 6.7" Cabinets Fit Almost Anywhere:

Even with professional 2-way drivers and rich power amplifier, the footprint is a compact 4.5" x 6.7" (110mm x 170mm) - perfect on a desktop or next to your laptop PC. There's no need to make space for speaker stands. The compact monitors can fit below many monitors or in crowded machine or server rooms.

2-way system and bass reflex port provides a wide frequency response of 80 Hz to 22 kHz:

Even though they're priced like standard PC desktop speakers, the VL-S3 provide professional monitoring quality. With a frequency response of 80 HZ to 22 kHz, every sound is faithfully reproduced - from the body resonance of a bass drum to a tinkling wind chime. The wide response is reproduced by the 2-way system design - consisting of a woofer, tweeter, and the bass reflex port located on the rear of the cabinet.

Built-in Power Amplifier with 14 Watts Per Channel:

Designed specifically for desktop systems, the integrated 14 W + 14 W power amplifier provides you not only powerful, full volume monitoring, but also features well-balanced sound at low volume. The VL-S3 work great in areas where excessive volume might be a problem, such as bedrooms, dorm rooms, and apartment buildings.

RCA and Stereo Mini Jack Line Inputs:

The dual RCA inputs provide a common, compact interface for connecting with unbalanced sources. A 1/4" stereo phone plug to RCA conversion cable is included for sources like an audio interface or Portastudio with a 1/4" phone output jack can be interfaced.

The VL-S3 also includes a 1/8" stereo mini input jack, which automatically shuts off the RCA inputs. Using a standard stereo mini cable, a portable MP3 player, iPad or smartphone can be connected.
Read more
 1 in stock $95.94
Cat: 602521 Rel: 17 Mar 16
 
Audio & power kit for connecting TC Helicon vocal effect pedals in a chain - UK 3-pin adapter included
Notes: Audio power & accessory kit:
Mix and match up to 4 TC-Helicon vocal effect pedals together conveniently, simply and with less cable clutter than ever before with this essential audio and power accessory kit - ideal for VoiceTone Singles. With the included 12-volt power supply and DC interconnect cables, there are many different options for connecting your TC-Helicon effects.

Included:
- 12V, 1A power supply
- 3x DC daisy-chaining connectors
- 3x short XLR cables

*Photographed VoiceTone units are not included
Read more
 1 in stock $47.40
Cat: 677053 Rel: 15 Feb 18
 
Universal case for all Teenage Engineering Pocket Operators
Notes: CA-X silicone pro-case is the best companion for your pocket operators. With an updated design, this case includes a hole for microphone, anti-slip feet, neck strap, battery protection and pro feel buttons. It is compatible with all pocket operator models.
Read more
 4 in stock $41.69
Cat: 474697 Rel: 23 Nov 12
 
Accessory wallet for your OP-1 synthesizer.
Notes: Teenage Engineering wallet, finished in black, makes the ultimate accessory for your OP-1 synthesizer. Teenage Engineering wallet comes manufactured from hard wearing polyester and this soft case provides additional storage. OP1 wallet measures 85mm x 85mm, easily attaches to your OP-1 soft case and is perfect for storing all your OP-1 accessories.
Read more
 1 in stock $23.32
Cat: 474696 Rel: 24 Nov 12
 
3.5mm radio antenna for the OP-1
Notes: This is a 3.5mm plug-in radio antenna for the Teenage Engineering OP-1 Synth which turns the OP-1 into a radio.

http://www.youtube.com/watch?feature=player_embedded&v=to3bjSnLZZM
Read more
 2 in stock $22.18
Cat: 474694 Rel: 24 Nov 12
 
OP1 Display protection screen
Notes: This clear film display protection sheet is made for the Teenage Engineering OP-1 Synth. It protects the screen from dust and scratches and is very easy to apply.




Read more
 2 in stock $12.82
Cat: 474700 Rel: 23 Nov 12
 
OP1 USB cable
Notes: The Teenage Engineering custom OP-1 pro USB cable. For charging and file transfer.
Read more
 2 in stock $29.08
Cat: 588502 Rel: 30 Sep 15
 
Pack of 3 Pocket Operator screen protectors
Notes: Display screen protectors for Teenage Engineering Pocket Operator range, pack of 3.
Read more
 2 in stock $14.82
Cat: 638396 Rel: 05 May 17
 
Pocket operator drum synthesizer & sequencer
Notes: Drum synthesizer and sequencer with para-meter locks, punch-in effects and unlimited sounds with micro-tonic VST through data transfer.

Unlimited sounds:

PO-32 is the first pocket operator which allows unlimited sounds. in addition to the 16 preset sounds, you can use sonic charge micro-tonic VST to craft your own unique sounds and transfer them wirelessly to PO-32 with the built-in microphone, or alternatively by using a cable.

Upgraded hardware platform:

PO-32 has a built-in microphone for transferring and receiving data over sound. it also has a removable lock tab for write protection of patterns. the hanger strength is increased for extra durability, and on the backside of unit there are some useful combo reminders.

New pro-case:

CA-X silicone pro-case is the best companion for PO-32. with an updated design, this case includes a hole for microphone, anti-slip feet, neck strap, battery protection and pro feel buttons. it is also compatible with all pocket operator models.
Read more
 3 in stock $85.60
Cat: 549793 Rel: 05 May 15
 
A pocket-size drum synthesizer and sequencer with parameter locks, individual step re-trig and punch-in effects
Notes: A pocket-sized drum synthesizer and sequencer with parameter locks, individual step re-trig and punch-in effects.

Pocket operators are cleverly designed on a single circuit board. By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Experience a fresh new way to create music using your thumbs. With its pocket size, its animated graphics, real synthesizer engines, sync, punch-in effects, built-in speaker, alarm clock and impossibly low price, making electronic music has never been this much fun!
Read more
 1 in stock $54.86
Cat: 560992 Rel: 05 May 15
 
Bassline synthesizer and sequencer with parameter locks, punch-in effects and play styles
Notes: Bass line synthesizer and sequencer with parameter locks, punch-in effects and play styles.

Pocket operators are cleverly designed on a single circuit board. By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Experience a fresh new way to create music using your thumbs. With its pocket size, its animated graphics, real synthesizer engines, sync, punch-in effects, built-in speaker, alarm clock and impossibly low price, making electronic music has never been this much fun!
Read more
 3 in stock $52.23
Cat: 560993 Rel: 05 May 15
 
Melody synthesizer and sequencer with parameter locks, punch-in effects, arpeggio and chord play styles.
Notes: Melody synthesizer and sequencer with parameter locks, punch-in effects, arpeggio and chord play styles.

Pocket operators are cleverly designed on a single circuit board. By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Experience a fresh new way to create music using your thumbs. With its pocket size, its animated graphics, real synthesizer engines, sync, punch-in effects, built-in speaker, alarm clock and impossibly low price, making electronic music has never been this much fun!
Read more
 2 in stock $59.26
Cat: 589563 Rel: 30 Sep 15
 
Melody synthesizer and sequencer with parameter locks, punch-in effects, arpeggio and chord play styles - bundled with silicone pro case & display protector
Notes: Melody synthesizer and sequencer with parameter locks, punch-in effects, arpeggio and chord play styles.

Pocket operators are cleverly designed on a single circuit board. By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Experience a fresh new way to create music using your thumbs. With its pocket size, its animated graphics, real synthesizer engines, sync, punch-in effects, built-in speaker, alarm clock and impossibly low price, making electronic music has never been this much fun!
Read more
 1 in stock $87.79
Cat: 599814 Rel: 03 Feb 16
 
Pocket sized arcade synthesizer
Notes: Arcade synthesizer and sequencer, with parameter locks, chord control and punch-in effects.

All pocket operator models perfectly complement each other. From drum machine, bass and lead synthesisers to noise percussion, the six unique units allow you to start a pocket band. Use them separately or connect them together, the choice is yours.

Use the built-in speaker for instant sound, connect a pair of headphones for detailed personal listening, or hook up a speaker system and the club will go boom!

Pocket operators are designed on a single multiple-layer circuit board using high quality components. They all share a compact and durable form factor.

By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Optional extras:
Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons. Use the SP-10 display protection to protect the LCD screen, and start a jam sync session with your friends using the MC-3 mini cables.
Read more
 3 in stock $55.97
Cat: 599822 Rel: 03 Feb 16
 
Pocket-sized percussion/drum machine
Notes: Noise percussion drum machine and sequencer, with parameter locks, solo functionality and punch-in effects.

All pocket operator models perfectly complement each other. From drum machine, bass and lead synthesisers to noise percussion, the six unique units allow you to start a pocket band. Use them separately or connect them together, the choice is yours.

Use the built-in speaker for instant sound, connect a pair of headphones for detailed personal listening, or hook up a speaker system and the club will go boom!

Pocket operators are designed on a single multiple-layer circuit board using high quality components. They all share a compact and durable form factor.

By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Optional extras:
Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons. Use the SP-10 display protection to protect the LCD screen, and start a jam sync session with your friends using the MC-3 mini cables.
Read more
 2 in stock $49.27
Cat: 599823 Rel: 03 Feb 16
 
Pocket-sized live synthesizer with real 8-bit synthesizer engines
Notes: Live synthesizer and sequencer, with parameter locks, glide control and punch-in effects.

All pocket operator models perfectly complement each other. From drum machine, bass and lead synthesisers to noise percussion, the six unique units allow you to start a pocket band. Use them separately or connect them together, the choice is yours.

Use the built-in speaker for instant sound, connect a pair of headphones for detailed personal listening, or hook up a speaker system and the club will go boom!

Pocket operators are designed on a single multiple-layer circuit board using high quality components. They all share a compact and durable form factor.

By placing all vital and sensitive components under the LCD display there's no need for an outer case. By saving this cost, high quality components could be used to guarantee the best possible sound and very low power consumption. The space under the display also doubles as a speaker box.

Optional extras:
Add the silicone pro case to protect your pocket operator and get anti-slip feet, neck strap, battery protection and pro feel buttons. Use the SP-10 display protection to protect the LCD screen, and start a jam sync session with your friends using the MC-3 mini cables.
Read more
 3 in stock $54.86
Cat: 567758 Rel: 27 Mar 15
 
High quality suono format metal audio cassette tape
Notes: THAT'S CD-MH is a metal tape offering today's best "High Frequency" performance, making it the best tape available for "High Energy" music such as rock and symphonic utilising THAT'S "Super Alloy" for recording in the high/chrome position.
Read more
 More than 10 in stock $4.60
Cat: 595829 Rel: 19 Jan 16
 
Cable version of a distribution PCB (printed circuit board) - short
Notes: TipTop's Flying Bus Board is a cable version of a distribution PCB (printed circuit board) and extends the reach of one of your uZeus cables or adds a third row.
Read more
 3 in stock $14.26
Cat: 618533 Rel: 03 Aug 16
 
Portable Eurorack system for synth modules, ideal for use in the studio or on the road
Notes: Station 252 is a portable Eurorack system that transforms your collection of modules into a distinctive-looking musical instrument that is great for the studio, easy to travel with, and powerful on stage. In the studio, Station 252's ergonomic design provides a natural interface that allows you to work comfortably with your knobs, cables, and tactile elements.

Traveling is a breeze; it folds down and is ready to go in less than a minute and it's easy to carry in one hand, even when completely filled with modules. It was made to fit in an airplane overhead bin and provides the convenience of a universal power supply wherever you go. Under the spotlight, Station 252's clean, professional design enhances your system's appearance and seamlessly integrates with your electronic music performance.

Design:

Station 252 is the product of careful electromechanical engineering. The result is a rack system made of three rows of 84HP for a total module space of 252HP that converts into four different positions. Constructed from carefully selected lightweight materials, this entire Eurorack weighs only 13lbs/5.9kg when empty and is built to last.

Station 252 comes equipped with a complete hardwired ZEUS Studio Bus power supply system, the world's only high-power system that can guarantee low noise with minimal bleed-through between modules for a clear sounding synth. This monster power system has proven record of reliability, safety, and performance all around the world. Included are three Zeus Studio Bus boards supplying up to 7200mA of audio grade power to your modules, that is twice more than previous version of Zeus. ZEUS keeps your modules in a coot space, optimizing their performance and extending their lifecycles. The Station 252 can take power anywhere in the world from 100-240VAC.
Read more
 1 in stock $887.92
Cat: 595824 Rel: 19 Jan 16
 
Power supply for Eurorack synth module systems, with guaranteed low noise and minimal bleed between modules
Notes: The Zeus Studio Bus is Tiptop Audio's next generation of the Zeus Eurorack power system and is the world's only high-power system that can guarantee low noise with minimal bleed-through between modules for a clear sounding synth. The power supply is the backbone of your modular system and will define how well it all works; this is not some simple circuit that flashes LEDs on but is a complex analog circuit, not something you want to chance with the various boutique power supplies.

The Zeus SB takes the next step to simplify wiring up power into cases that scale from a simple 3U row to complete walls of modular synthesizers, all done without dealing with hot AC power lines. The Zeus system comprises of an external brick Cincon-TTA power supply, Zeus Access and a Zeus Studio Bus, providing everything needed for a DIY or a professional Eurorack case. The Zeus Studio Bus board is equipped with fourteen Eurorack standard power connectors and two AS power connectors. Connecting wires to and from the board is done using a spring action connector, no special tools are needed, all it takes is to push the lever down and insert the wire. The spring action connector provides multiple points of connection allowing for different types of power configurations, starting with simple daisy chains and up to professional multi-thread star wiring. At the heart of the Zeus SB is our new design of discrete linear power regulators, aimed at providing robust, Low noise studio-grade power to deal with today's growing challenge of a great selection of modules from many different manufacturers that must share the same power bus. And with an eye towards the future, the Zeus SB prepares you for the new wave of high-current digital modules and the upcoming Tiptop Audio Analog Polyphonic system.
Read more
 6 in stock $118.52
Cat: 634207 Rel: 11 Dec 17
 
Hybrid digital/analog synthesizer module with built-in step sequencer
Notes: Acid8 is a fun and easy to use hybrid digital/analog acid machine controlled by a powerful step sequencer. The heart of Acid8 is an 8-BIT oscillator that can be manipulated to the extreme. You have 16 waveforms to choose from and can even redraw your own! You can apply up to 5 DSP effects at once, invert bits of the digital signal for weird harmonics and effects, link the ENV mod to pitch for percussive sounds and more!

All signal beyond the oscillator is 100% analog offering a punchy VCA and gritty resonant low pass filter. The built-in step sequencer has all the functionality you would expect from an acid machine and is very easy to use so you'll be composing patterns effortlessly. Edit, copy/paste & randomize patterns in real-time without having to stop the sequencer. 8 levels of swing are available to get your grooves going - swing and waveshape info are stored within the pattern! You can chain patterns into songs...

New look, new feel:
- Acid8 has been upgraded featuring a slick rugged brushed aluminium case and the highest quality bolted potentiometers and metal knobs.
- The instrument is more compact now measuring only 21cm x 10cm x 4.5cm
- The audio circuit has also been updated to feature a stronger accent. The functionality and layout are the same and the firmware is cross compatible between MKI and MKII.

Connectivity:
- Midi In & Out (2 midi cables provided)
- Sync In & Out
- Audio out
- DC In (power supply suited for your region provided)
Read more
$306.18 SAVE 20%
 2 in stock $244.94
Cat: 634210 Rel: 11 Dec 17
 
8-bit chip-style synthesizer module with 64 preset memory banks
Notes: The Twisted Electrons AY3 MKII 8-Bit Synthesizer is a compact, synthesizer module featuring dual 8912 chips that deliver 6 voice polyphony. The AY3 MKII 8-Bit Synthesizer brings back the nostalgia of 8-bit sounds, allowing you to create everything from arpeggiated sounds to sequences and more. The 3-voice programmable sound generator includes 5 pots and 1 endless encoder with a push button for optimal control, allowing you to sculpt and mould the sound to your desire. The sounds the AY3 MKII produces are borrowed and influenced from classic arcade games and video game consoles such as the Amstrad CPC, Sinclair Spectrum and more. The built-in step sequencer and 4 arpeggiator modes allow you to create sequences and rhythms on the fly, with full stereo sound for optimal audio quality.

New look, new feel:
- Ay3 has been upgraded featuring a slick rugged brushed aluminium case and the highest quality bolted potentiometers and metal knobs.
- The instrument is more compact now measuring only 14 cm x 10 cm x 4.5 cm
- The functionality and layout are the same and the firmware is cross compatible between MKI and MKII.

Connectivity:
- MIDI in (3.5mm midi cable supplied)
- 2x Audio Out
- DC In (power supply suited for your region supplied)
Read more
 1 in stock $229.36
UDG
Cat: 634848 Rel: 12 Dec 16
 
Professional, durable case for Akai MPC Touch controllers
Notes: A Digital DJ looking for a professional, durable case solution for your Akai MPC Touch controllers? Then look no further, UDG have developed a super light EVA hard case designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Akai MPC Touch controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.
Read more
 2 in stock $55.98
UDG
Cat: 680818 Rel: 06 Mar 18
 
Durable hard case designed to fit the Pioneer Toraiz SP16, Roland TR8 & Novation Peak
Notes: A producer looking for a professional, durable case solution for your Pioneer Toraiz SP-16/Roland TR8/Novation Peak controller? Then look no further, as UDG have developed a super light EVA hard case designed for life on the road.

Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior, this case provides protection against drops, scratches & liquids.

Skilfully designed & moulded to fit the Pioneer Toraiz SP-16/ Roland TR8/Novation Peak controller, this case is perfect for travelling producers who need to protect their equipment.

Fits: Pioneer Toraiz SP-16/Roland TR8/Novation Peak controller plus power adapter and extra cables.
Read more
 1 in stock $97.67
UDG
Cat: 634852 Rel: 12 Dec 16
 
Professional, durable case for Universal Audio Apollo Twin controllers
Notes: A Digital DJ looking for a professional, durable case solution for your Universal Audio Apollo Twin controllers? Then look no further, UDG have developed a super light EVA hard case designed for life on the road. Constructed from durable lightweight compression moulded EVA material with a laminated nylon exterior these cases provides protection against drops, scratches & liquids. Skilfully designed & moulded to fit the Universal Audio Apollo Twin controllers, these cases are perfect for the travelling DJ that needs to protect their equipment.
Read more
 1 in stock $33.46
Notes: Created for the electronic musician, the UDG Producer Bag is specially designed to carry a 17" Mac Powerbook, M-Audio Ozone or Oxygen 8 keyboard, M-Box, Firewire Interface, microphone, headphone, iPod and accessories.

Constructed from nylon, the backpack-styled UDG Producer Bag features padded walls, contoured shoulder straps, large front & side zip pockets with velcro secure tabs, electro-plated YKK zippers and integrated combination lock. The UDG Producer Bag is guaranteed to protect the sizeable investment made by many musicians and producers in their portable studio gear. The Producer Bag can also be combined with all UDG trolleys.
Read more
 1 in stock $144.86
Cat: 528082 Rel: 30 Apr 14
 
Ultra compact, three-position tilt Genesis series amp stand with locking legs
Notes: The Ultimate Support AMP-150 is the perfect addition to the gigging guitar player's rig. Not only does it comfortably hold a small to mid-sized combo amp up to 75 lbs, but it's tilted (putting the sound where you need it instead of at your feet), AND it features a mic boom attachment making an additional mic stand obsolete!

There's no need to carry an additional mic stand when gigging with an AMP-150. There's a built-in mic boom attachment at the top of the height-adjustable stand! Just add your favorite boom arm (or a gooseneck) and microphone, and you're ready. Great for both live sound reinforcement or for recording in the studio.

Featuring three tilt positions, you can aim your amp exactly where you need it when using an AMP-150 amp stand. You'll be able to hear high frequencies at much lower volume levels on stage and in practice, and the sound guy will have better control over FOH sound since your amp is no longer facing directly forward.

The AMP-150 is one piece that quickly folds into an ultra compact, 3.5" x 18" unit. Take your stand anywhere and never lose parts again! And, the sturdy tripod base holds up to 75 lbs - it's the perfect addition to your small to mid-sized combo amp!

Genesis Series guitar and amp stands feature a unique, patented leg-locking mechanism. When setting up the stand, unlock the legs, unfold and lock the legs in place for worry-free stability and strength. When finished with the gig, unlock the legs, fold, and lock for easy, compact portability. The ingenious leg lock eliminates "floppy leg" syndrome.
Read more
 5 in stock $32.65
Cat: 638099 Rel: 06 Feb 17
 
Padded tote bag for two regular sized speaker stands
Notes: The Bag-90D by Ultimate Support is the perfect addition to your gigging rig! Each Bag-90 holds two regular sized speaker stands, including the TS-100B, TS-90B, TS-80B/TS-80S, and TS-70B. It is a heavy-duty tote bag with a reliable zipper and enhanced pulls. The Ultimate Support Bag-90D also features two strong, durable hand grips that velcro together to give you added carrying strength and comfort.
Read more
 1 in stock $52.67
Cat: 674545 Rel: 08 Jan 18
 
JamStands Series double hanging-style guitar stand with personalized coloured accent bands
Notes: The New JS-C Series of customizable JamStands from Ultimate Support allows users to personalize their JamStands. Using our custom colour bands, it is now possible to add your favourite custom colours to JamStands in the line, which otherwise retain the features and functionality customers love. Match your band's logo or a favourite shirt, play themed parties, and more with the new JS-C line of JamStands from Ultimate Support.

Note: Only blue custom bands are included with purchase. Other colours must be purchased separately.
Read more
 1 in stock $22.50
Items 1,001 to 1,050 of 2,611 on page 21 of 53
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ALL
«  1  2  3  ...  20  21  22  ...  51  52  53  »

Filter

Back Catalogue: Studio Equipment
Release Date
Monthly payment
Number of monthly payments
Cash price
Deposit to pay
Loan amount
Loan repayment
Cost of loan
Total amount payable

Only available to UK residents over 18, subject to terms and conditions. More info here.

These rates of finance are based on this specific product and can be applied for once this item has been added to the cart. Adding other products to your cart may change the rate of finance or deposit required.

Checkout and apply for finance now
Close