100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Home  All Genres  

Search dance music

Options
Items 1 to 50 of 70 on page 1 of 2
1  2  »
FORTHCOMING
ADDAC System ADDAC806 Bluetooth Audio Module (red faceplate)
Notes: This small module will allow you to send wireless audio signals from any bluetooth compatible device straight to your modular.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 4.5 cm

Electrical:
. Max current: 75mA on each rail
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
coming soon TBA
FORTHCOMING
ADDAC System ADDAC200S Size Matter Module (red faceplate)
Notes: ADDAC System's 1/4 to 1/8 inch adapter allow you to connect one 1/4 inch jacks to an 1/8 inch one right in from your rack- now you can leave all those cable adapters behind.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 3.5 cm

Electrical:
. Passive
Read more
MRP:$50.98
coming soon $50.11
FORTHCOMING
ADDAC System ADDAC807C+ Individual Channel Stereo Outputs Module (black faceplate)
Notes: Dedicated expansion for the ADDAC807C VC Summing Mixer

Features 4 individual track post fader stereo outputs.

2Hp
2 cm deep
0mA
Read more
MRP:$67.97
coming soon $65.35
FORTHCOMING
ADDAC System ADDAC301C Dual Sustain Pedal Switcher Module (red faceplate)
Notes: Passive dual sustain pedal switcher.

Plug any CV or audio source through it and control its state (on / off) through any standard sustain pedal.

Specs:
. Passive Module
. Width: 4 HP
. Depth: 3 cm
Read more
MRP:$67.97
coming soon $65.35
FORTHCOMING
ADDAC System ADDAC200B 2HP Buffered Multiples Module (red faceplate) ADDAC System ADDAC200B 2HP Buffered Multiples Module (red faceplate)
Notes: ADDAC System's smallest buffered multiples allow you to connect one source to its input and have it distributed through all of the 3 adjacent outputs. You get two sets of four connectors. and it can do both audio and CV!
Read more
MRP:$67.97
coming soon $65.35
FORTHCOMING
ADDAC System ADDAC301B Dual Expression Pedal Attenuator Module (red faceplate)
Notes: Passive dual expression pedal attenuator.

Plug any CV or audio source through it and control its amplitude through any standard expression pedal.

Invert switch for inverting the expression pedal action.

Specs:
. Passive Module
. Width: 4 HP
. Depth: 3 cm
Read more
MRP:$73.20
coming soon $70.80
FORTHCOMING
ADDAC System ADDAC301 Floor Control Module (red faceplate)
Notes: While ADDAC were working on the new VC Stompboxes several expression pedals were tested and it became clear that most often, while playing a modular system, your hands are busy.
It's also normal to have an expression pedal lying around somewhere, so ADDAC have brought these back, cleaned up the dust and put them to good use.
This module allows the connection of any standard expression and sustain pedal.

The expression pedal action can be fine-tuned with Range and Offset knobs.
Range defines the voltage range (-10v, +10v).
Offset transposes the range by (-5v, +5v).
Two leds, plus and minus, monitor the CV Output
Positive and inverted output jacks.
The sustain pedal action will generate a gate signal on the gate output.
One led monitors this output.
The module also features a bus board +5v Adaptor, this will be able to provide +5v to any bus board.
This feature can be removed through a jumper on the back of the module.

Specs:
. Width: 4 HP
. Depth: 4 cm
. Max current: 20mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$78.43
coming soon $76.25
FORTHCOMING
ADDAC System ADDAC217 Quad Gate to Trigger Module (black faceplate) ADDAC System ADDAC217 Quad Gate to Trigger Module (black faceplate)
Notes: Following ADDAC System's T-Networks series, the importance of having the right input signal for firing drum modules or envelopes was realised. Gates and Triggers are often looked at as similar signals but at times it really makes a difference and results will change drastically depending if a Gate or a Trigger is fed to the input of such modules.

This led to the simple yet effective Gate to Trigger.
A four channel converter with bypass switch for each channel.

Any input Gate will be limited to a 1ms Trigger.

Tech Specs:
3HP
2.5 cm deep
10mA +12V
10mA -12V
Read more
MRP:$78.43
coming soon $76.25
FORTHCOMING
ADDAC System ADDAC304 Manual Gates Module (red faceplate) ADDAC System ADDAC304 Manual Gates Module (red faceplate)
Notes: With the ADDAC304 Manual Gates, you'll be getting 8 manual gates (0 +5v) in a nifty package - a perfect way to perform on and control your modular system.

The ADDAC304 comes with an interesting twist: 4 out of the 8 available gates can act as momentary switches, outputting the signals in their respective inputs when each gate's button is pressed.

MECHANICAL:
Format: Eurorack
Width: 8 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
Gate outputs: 0 +5v

ELECTRICAL:
Max current: 10mA
Read more
MRP:$90.20
coming soon $87.14
FORTHCOMING
ADDAC System ADDAC807A+ Individual Channel Stereo Outputs Module (black faceplate)
Notes: Dedicated expansion for the ADDAC807 VC Summing Mixer

Features 5 individual track post fader stereo outputs.

6HP
2 cm deep
0mA
Read more
MRP:$90.20
coming soon $87.14
FORTHCOMING
ADDAC System ADDAC213B Eurorack Bridge Module (black faceplate) ADDAC System ADDAC213B Eurorack Bridge Module (black faceplate)
Notes: The ADDAC213B is the second pair of modules from ADDAC's Eurorack Bridge system.

A pair of ADDAC213Bs can be used in standalone to send/receive 8 CV or audio signals between different points inside the same case or as an expansion to the main pair of Eurorack Bridge modules, the ADDAC213As.

Two ADDAC213B modules can be connected to each other with the use of a single ribbon cable and then used inside a case to carry signals between distant points without the need for long cables. Less clatter, less spaghetti- more space of your fingers on those knobs!

ADDAC213Bs always come in pairs. A single pair can send & receive up to 8 CV or audio signals between different points in your case at the same time. The modules can be installed in normal position or a 180 degree position to fit any need.

As an Expansion to an ADDAC213A.

Each ADDAC213B connected to the backside of an ADDAC213A adds 8 more channels to the main bridging functionality of the ADDAC213A.

Up to 2 ADDAC213B can be connected to an ADDAC213A module, expanding the bridging between two difference cases to a total of 24 channels.

If you're looking for a simple one-cable bridge between your various cases, then look no further than the ADDAC213A.

Between the ADDAC213A pair and the ADDAC213B, your cases never looked so elegantly connected together!

Each module can be installed in normal position or at 180 degrees.

Mechanical:
. Format: Eurorack
. Width: 3 HP
. Depth: 2.5 cm

Electrical:
Passive / Does not draw current
Ribbon Cable: 50cm or 100cm ribbon cable
Read more
MRP:$90.20
coming soon $87.14
FORTHCOMING
ADDAC System ADDAC300 Power Starvation Module (75mA version) (red faceplate)
Notes: Power starvation is the first hack that any "DIY'er" learns. It's also one of the hacks that can generate some of the most interesting sonic effects in circuit bending, and ADDAC have applied this principle to the modular world. Plug any module of your choice through it and independently tune it's i power.

This will have most interesting effects in analog modules: filters, delays, mixers. They can either go silent or start screaming at your ears, going berserk with the lack of current to behaving normally.

Two IDC connectors on the back allow to independently plug 2 modules of your choice.

Bypass switches for easy operation.

The trimmers allow for setting a minimum voltage plateau. Most modules will shut down from 3 to 10v. These trimmers allow to set them at the right sweet spot and enjoy the full range of the pot for the power starving.

This module uses special potentiometers which are way more expensive than regular ones.

Specs:
. Passive Module
. Width: 4 HP
. Depth: 4 cm
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$100.65
coming soon $98.03
FORTHCOMING
ADDAC System ADDAC209 VC Time Compensated Glide Module (red faceplate)
Notes: This is our take on a glide/slew circuit. It introduces a time compensation for the glide/slew rate so that any interval have the same glide time.

Normal glides have a fixed speed, they take X time to go up a semitone and X*12 to go up an octave. A compensation circuit was added to detect and dynamically change the speed according to the distance needed to be made, so that in the end it'll take the same time to reach the final destination no matter if the interval is 1 semitone or 3 octaves. This compensation feature (dry/wet) can controlled by the front panel knob or by CV.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 55 mm

Electrical:
. Max current: 60mA.
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
.black screws
.black fibre washers
Read more
MRP:$100.65
coming soon $98.03
FORTHCOMING
ADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplate) ADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplate)
Notes: Inspired and officially licensed from Teia's Stochastic Function Generator which was introduced in 2013 but is no longer available. This earlier version served as an inspiration, but with a completely rebuilt and reprogrammed mcu to a fully featured 4 voice 2 stage envelope and slew generator.

ADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplateADDAC System ADDAC506B VC Stochastic Function Generator Expansion Module (black faceplate
This expansion allows extra I/O to the ADDAC506, namelly:

Four trigger inputs for the random engine.

Four CV random outputs from the random engine.
Read more
MRP:$100.65
coming soon $98.03
FORTHCOMING
ADDAC System ADDAC200PI Pedal Integrator Module (red faceplate) ADDAC System ADDAC200PI Pedal Integrator Module (red faceplate)
Notes: This small utility is the pedal's lover best friend, it allows 2 diferent chains of pedals to be independently connected to your synth.

The Send channels attenuate the synth level to instrument level.

The Return channels amplify the signal from instrument to synth level.

Specs:
. Width: 4 HP
. Depth: 3 cm
. Max current: 10mA
Read more
MRP:$100.65
coming soon $98.03
FORTHCOMING
ADDAC System ADDAC305 Manual Latches Module (red faceplate) ADDAC System ADDAC305 Manual Latches Module (red faceplate)
Notes: The ADDAC305 Manual Latches is a combination of 8 manual latching switches in a small and elegant module: each button toggles between Gate high / Gate low when pressed, outputting a 5V gate signal. Additionally 4 of the 8 available latches, sport inputs and can act as manual latching switches, allowing the incoming signal to pass to the output when the button is toggled.

MECHANICAL:
Format: Eurorack
Width: 8 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
Gate outputs: 0 +5v

ELECTRICAL:
Max current: 10mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$107.19
coming soon $103.48
FORTHCOMING
ADDAC System ADDAC213A Eurorack Bridge Module (black faceplate) ADDAC System ADDAC213A Eurorack Bridge Module (black faceplate)
Notes: A pair of ADDAC213As acts as a simple one-cable bridge between different cases. By itself the ADDAC213As can send/receive 8 CV or audio signals between your cases, but can be expanded to bridge two cases for up to 24 signals at the same time.

Use a pair of ADDAC213As to send & receive 8 CV or audio signals between distant points in your case, between two separate cases, or between your case and a friend's case. Less clatter, less spaghetti, faster connection! There's nothing better than being able to connect that controller skiff with just one cable to your main system. At a gig, in the studio, when jamming with a friend, give yourself a gift by grabbing a pair of ADDAC213As.The modules can be installed in normal position or a 180 degree position to fit any need and any case design.

Each ADDAC213A module can be connected through a ribbon cable connection on its backside with up to two ADDAC213Bs. Each ADDAC213B module added expands the channels options of the ADDAC213A by adding 8 more channels. With two 2 ADDAC213Bs connected to each ADDAC213A module, you'll have a total of 24 channels going between your cases with a simple one-cable bridge. Between the ADDAC213A pair and the ADDAC213B, your cases never looked so elegantly connected together!

The ADDAC213As are always sold as a pair of 2 modules and an included ribbon cable.

Each module can be installed in normal position or at 180 degrees.

Mechanical:
. Format: Eurorack
. Width: 6 HP
. Depth: 2.4 cm

Electrical:
Passive / Does not draw current
Ribbon Cable: 50cm or 100cm ribbon cable
Read more
MRP:$107.19
coming soon $103.48
FORTHCOMING
ADDAC System ADDAC105 4 Voice Cluster Module (black faceplate) ADDAC System ADDAC105 4 Voice Cluster Module (black faceplate)
Notes: Following the ADDAC103 T-Networks, this new module is inspired by it's simplicity. This is a 4 voice Square Oscillator with VCA, FM switch and a slew decay for the incoming Trigger IN. All voices are then sent through a Multimode Filter.

Each voice has it's own VCA input where any input is accepted (Trigger, Gate, CV) The [DECAY] controls the slew decay applied to the incoming signal, if [DECAY] is fully anti-clockwise then it works as a Mute. The [FM ON] switches activate/deactivate the FM input coming from the previous voice: Voice 1 FM comes from voice 4, voice 2 FM comes from voice 1, and so on, so you can FM all of them in a FM loop.

All 4 voices are summed and sent through a filter with controls over [CUTOFF] with an Attenuverter for the CV input and [RESO- NANCE]. Three filter outputs are provided [LOWPASS], [BANDPASS] and [HIGHPASS]

The [EXTERNAL IN] input can be routed through a jumper on the back of the module allowing the incoming signal to go to:
the filter input for processing an external audio source.
all of the 4 voices Frequency control allowing for some experi- mental CV control over pitch of all 4 voices at the same time (due to the specificities of the circuit and to keep the module at a low price these inputs are not callibrated to 1v/octave).

Read more
MRP:$112.42
coming soon $107.83
FORTHCOMING
ADDAC System ADDAC103 T-Networks Module (black faceplate) ADDAC System ADDAC103 T-Networks Module (black faceplate)
Cat: 776114 • View all Synth modules
 
4-voice percussion module
Notes: Inspired by Twin T-Networks circuits used in many lengendary drum machines, ADDAC system have developed a simple and straight forward 4 voice percussion module with frequency controls for each of its voices.

At each voice input there's a gate to trigger converter so any input source is possible.
Audio inputs can also be used as an input, in this case and due to the nature of the gate to trigger converter, each voice can be used as very destructive filters.

The top 2 channels feature a higher frequency range, the bottom 2 channels feature a lower frequency range.

Tech Specs:
6HP
2.5 cm deep
40mA +12V
40mA -12V
Read more
MRP:$112.42
coming soon $107.83
FORTHCOMING
ADDAC System ADDAC402B HRG Expansion Module (red faceplate) ADDAC System ADDAC402B HRG Expansion Module (red faceplate)
Notes: ADDAC402B MIDI Expansion allows full I/O Midi control of ADDAC402 plus access to a powerfull midi interface, with:

Midi Sync:
Allows the module to synchronize with any external MIDI device’s Clock, including transport messages like play, stop and continue.

CV to MIDI:
5 CV inputs (Fills 1 to 4 and Assign) to MIDI Notes and/or CC messages, the Note and CC number can be independently configured via the Configuration Menu.
These CV inputs can be sent on independent MIDI Channels, for ex: Fills 1 to 4 on MIDI Channel 1 and Assign on MIDI Channel 2.

MIDI Controller:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be sent to MIDI Out as CC controls as any standard MIDI controller. The individual CC numbers can be configured through the Configuration Menu.

MIDI to Gate:
All 4 Gate outputs can be controlled/sequenced from an external MIDI device.
For ex: we can configure Gate 1 to be responsive to CC 1, Gate 2 to CC 2 and so on. Everytime CC 1 gets a value of 127 Gate 1 will be turned ON, if it gets a 0 value Gate 1 will be turned OFF.

MIDI Control:
All panel controls (9 knobs, 4 toggle switches and 11 push buttons) can be controlled/sequenced from MIDI CC controls. This allow full automation of the module via MIDI
The individual CC numbers can be configured through the Configuration Menu and includes a midi learn feature for easier configuration.
Also controllable via MIDI is the change of Presets and Modes.
Read more
MRP:$112.42
coming soon $108.93
FORTHCOMING
ADDAC System ADDAC208 Comparator & Rectifiers Module (red faceplate)
Notes: A Comparator is an electronic circuit that compares two voltages and switches its output to indicate which is larger. The Comparator operates between -10 or +10V

The Output is always -10V if below Threshold and +10V if above Threshold.

A Rectifier is an electronic circuit that is used to transform AC signals to an equivalent DC signal while removing one of it's polarities, i.e. Positive rectification excludes negative signals and vice-versa.
Both sections can be used to change the shape of any waveform as well as its harmonic content.

FRONTPANEL:
1 Comparator Threshold Knob
1 Comparator Jack Output
2 Comparator Monitor Led1 Common Signal Jack Input
4 Rectificated Outputs

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$134.64
coming soon $129.62
FORTHCOMING
ADDAC System ADDAC202 Amplifiers Module (red faceplate) ADDAC System ADDAC202 Amplifiers Module (red faceplate)
Notes: A dual channel Amplifier that either boosts your signals up to 10 times the original input or attenuates it to zero.

It also features two leds per channel, to monitor your output polarity.

MECHANICAL:
Format: Eurorack
Width: 4 HP
Depth: 2.5 cm

CONTROL VOLTAGE I/O:
CV inputs: i 10v
CV outputs: i10v

ELECTRICAL:
Max current: 30mA
Compatible with +-12v and +-15v power supplies
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$134.64
coming soon $129.62
FORTHCOMING
ADDAC System ADDAC111B Ultra .WAV Player Expansion Module (red faceplate) ADDAC System ADDAC111B Ultra .WAV Player Expansion Module (red faceplate)
Notes: The ADDAC111B EXPANSION allows the user to access the first 8 files (a to h) through a trigger.

Files do not play simultaneously, if several triggers happen at the same time top priority goes from top to bottom- meaning that if B E and F triggers are received at once the file that will be played is file B.

The expansion module should be plugged to the back of the Ultra .Wav Player module. There's no connection to the bus boards.

Specificaitons:
Mechanical:
Format: Eurorack
Width: 16 hp
Depth: 3 cm

Control voltage i/o:
CV inputs: i 5v
CV outputs: 0 +10v

Electrical:
Max current: 150ma
Compatible with +-12v and +-15v power supplies
Bus board cable: 8x2 idc (doepfer style) connect
Read more
MRP:$134.64
coming soon $129.62
FORTHCOMING
ADDAC System ADDAC300 Power Starvation Module (150mA version) (red faceplate)
Notes: Power starvation is the first hack that any "DIY'er" learns. It's also one of the hacks that can generate some of the most interesting sonic effects in circuit bending, and ADDAC have applied this principle to the modular world. Plug any module of your choice through it and independently tune it's i power.

This will have most interesting effects in analog modules: filters, delays, mixers. They can either go silent or start screaming at your ears, going berserk with the lack of current to behaving normally.

Two IDC connectors on the back allow to independently plug 2 modules of your choice.

Bypass switches for easy operation.

The trimmers allow for setting a minimum voltage plateau. Most modules will shut down from 3 to 10v. These trimmers allow to set them at the right sweet spot and enjoy the full range of the pot for the power starving.

This module uses special potentiometers which are way more expensive than regular ones.

Specs:
. Passive Module
. Width: 4 HP
. Depth: 4 cm
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$134.64
coming soon $130.71
FORTHCOMING
ADDAC System ADDAC306 VC Transitions Module (black faceplate) ADDAC System ADDAC306 VC Transitions Module (black faceplate)
Notes: ADDAC306 is a 5 channel multi-directional CV generator.

You can think of it as a "sweet spot" controller, or a hands-on way of transiting from one state to another.

Each of the five channels has MINIMUM, SPAN and DIRECTION controls, a common CV IN and a common TRANSITION CONTROLLER slider.

MINIMUM sets the minimum channel voltage.

SPAN sets the voltage range of the channel.
It essentially sets the maximum voltage that can be output from the channel, relative to what the current channel MINIMUM is. For a given SPAN value, if the MINIMUM voltage is changed then the maximum voltage output from that channel will also change respectively.

DIRECTION sets whether the voltage transition for each channel goes from MINIMUM to maximum, or maximum to MINIMUM.

The TRANSITION CONTROLLER slider controls the transition from the minimum value (A) to the maximum value (B) or vice versa, according to the settings of each independent channel.
Moving this slider generates 5 different voltages with 5 different ranges and directions. The transition can also be operated from a CV source at the CV IN, in which case the slider position acts as an attenuator for the incoming voltage.

The maximum range of each channel can be set to either 5 or 10 volts, by 5 jumpers in the back of the module. Only positive voltages are generated at the output.

Using the CV IN you can use two ADDAC306 modules to expand your control options to 9 voltage outputs under one common slider control.
Use the VC Transitions to multiply the polyphony of a single CV sequencer by passing its outputs through the ADDAC207.
VC Transition makes for an awesome state transition controller. Plug its outputs to various CV controller parameters of your audio effects modules. Set the slider to position A, and set the minimum values for each channel. Then move the slider to position B and set the SPAN settings for each channel. Use the TRANSITION CONTROLLER slider to morph from state A to state B and backwards. Flip the DIRECTION switches to change the direction of the transition for each channel. Use the CV IN to automate the transition using LFOs, ADSRs or sequencers.
Plug the output of your ADSR envelope to the CV IN and set the channels differently to get 5 different ADSRs from one common source.


This module was developed based on an initial idea by Konstantine Fioretos.
Read more
MRP:$134.64
coming soon $130.71
FORTHCOMING
ADDAC System ADDAC501B Complex Random Expansion Module (red faceplate) ADDAC System ADDAC501B Complex Random Expansion Module (red faceplate)
Notes: The ADDAC501B expansion is connected directly to the ADDAC501 Complex Random. It extends functionality by adding gate outputs to the random generators.

If ADDAC501 generates a new random above the average between Minimum and Maximum, then the respective gate on ADDAC501B is triggered.

There are three pairs of gates, corresponding to the respective outputs on ADDAC501. Each gate pair has both positive and inverted outputs.

This expansion module also offers a dedicated knob for gliding effects. With it you can have a voltage ramp between two consecutive random numbers- randomized "legato" expressiveness.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 5 cm

Control Voltage I/O:
. Gate outputs: 0 - 5v

Electrical:
. Connects directly to ADDAC501
. Max current: 20mA
Read more
MRP:$134.64
coming soon $130.71
FORTHCOMING
ADDAC System ADDAC810 Phono Pre-Amp Module (red faceplate) ADDAC System ADDAC810 Phono Pre-Amp Module (red faceplate)
Notes: The Phono Pre Amplifier module- connect your turntable to it and bring it's sound straight into any of your patches.

Specs:
. Width: 4 HP
. Depth: 4.5 cm
. Current: 40mA
Read more
MRP:$134.64
coming soon $130.71
FORTHCOMING
ADDAC System ADDAC801 Simple Mixer Module (red faceplate) ADDAC System ADDAC801 Simple Mixer Module (red faceplate)
Notes: This module allows you to mix up to three input signals, either audio or control voltages.

Each of the inputs has a dedicated amplitude knob to control the channel volume.

Two mix outputs are available, a standard out and a secondary output with phase selection.

A jumper on the board allows the user to change the phase of the second output to be normal or inverted.


Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 2.5 cm

Electrical:
. Compatible with +-12v and +-15v power supplies
. Max current: 20mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$134.64
coming soon $130.71
FORTHCOMING
ADDAC System ADDAC602 Passive Ring Modulator Module (red faceplate)
Notes: A dual channel classic Passive Ring Modulator, with transformers and germanium diodes.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 3.5 cm

Electrical:
. Passive
Read more
MRP:$134.64
coming soon $130.71
FORTHCOMING
ADDAC System ADDAC215 Dual S&H+ Module (black faceplate) ADDAC System ADDAC215 Dual S&H+ Module (black faceplate)
Cat: 776254 • View all Synth modules
 
dual sample & holds module
Notes: This new module should not be judged by it's size, at 6hp it's packed with features.

At its core it features a noise source and two precision Sample & Holds with 0.01% of maximum deviation from the Input which allows for quantized signals to be sent through without any noticeable detuning or the typical voltage drops over time.

The Sample & Hold sections can also be used as a Track & Hold meaning it holds the incoming input while the Trigger input is ON and lets the input flow to the output when the Trigger input is OFF.
Each section also features it's own slew processor with a single control over attack and decay and an ON/OFF switch.

The noise signal is normalled to both sections inputs, meaning that without a jack plugged into the Input the sample and hold function will act upon the incoming noise signal generating random CV values.

The [Trigger A Alternate] switch allows to Link both sections so that any trigger input in Trigger A will alternate between triggering the A and B section.

Besides each section outputs there's also 4 extra outputs: Noise, Difference, Average and Sum. The Noise output is coming from the noise source, the Difference output is the subtraction of section A minus section B, the Average output is the sum of both A plus B and then divided by 2 and finally the Sum output is the sum of both A plus B sections.

MECHANICAL:
Format: Eurorack
Width: 6 HP
Depth: 4 cm

ELECTRICAL:
Max current: +50mA/-50mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$141.18
coming soon $136.16
FORTHCOMING
ADDAC System ADDAC216 Sum & Difference Module (black faceplate) ADDAC System ADDAC216 Sum & Difference Module (black faceplate)
Notes: There are two equal sections in this module labeled A and B.

This module is a peculiar type of mixer that instead of just summing two input signals (X & Y) it also allows the possibility to subtract the two signals.
It works both for audio and CV signals and hence the possibility to get the diference of two CVs or cancel the phase of two audio signals. The resulting signal, of sum or subtraction, is then routed through a switchable (on/off) full rectification circuit labeled: Absolute. After this the gain of the mixed signal goes through another attenuverter labeled: Amplitude to control the resulting signal gain which, being an attenuverter, also allows the possibility to invert the incoming signal. After the Amplitude comes an AC/DC coupling switch followed by an bipolar Offset knob.

Besides the normal output, there's also an inverted output for each of the A & B sections.

The outputs of section A & B are also summed and sent to the Average Output.

Using a single input, just the X or Y input, the module can also be used as a simple dual Attenuverter & Offset CV processor with full rectification and AC coupling options.

Average mix output of both sections.
Read more
MRP:$141.18
coming soon $136.16
FORTHCOMING
ADDAC System ADDAC812VU Module (black faceplate)
Notes: Stereo/dual VU metering module with buffered thru outputs for each channel.

An additional switch turns the beautiful lamps behind the VU meters off, in case your rack is running low on power!

A couple trimmers on the back of the module allows the user to define the VU range of each channel independently.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 3.5 cm

Electrical:
. Max current with lamps on: +100mA/-10mA
. Max current with lamps off: +10mA/-10mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$146.41
coming soon $141.61
FORTHCOMING
ADDAC System ADDAC104 VC T-Networks Module (black faceplate) ADDAC System ADDAC104 VC T-Networks Module (black faceplate)
Notes: Following the ADDAC103 T-Networks, this new module is also inspired by Twin T-Networks circuits used in many lengendary drum machines. A simple 4 voice module with frequency controls for each of the voices. This new module also features CV inputs with attenuverters for each voice Frequency. Due to the specificities of the circuit, and to keep the module at a low price, these inputs are not callibrated to 1v/octave.

At each voice input there's a gate to trigger converter so any input source is possible.
Audio inputs can also be used as an input, in this case and due to the nature of the gate to trigger converter, each voice can be used as very destructive filters.

The top 2 channels feature a higher frequency range, the bottom 2 channels feature a lower frequency range.
Read more
MRP:$180.39
coming soon $173.19
FORTHCOMING
ADDAC System ADDAC106 T-Noiseworks Module (black faceplate) ADDAC System ADDAC106 T-Noiseworks Module (black faceplate)
Notes: This is the last module in Addac System's T-Networks series, a straight forward 4 voice module with frequency and decay controls for each of the voices. As the name already unveils , a noise source has been added, and 2 different circuits have been created, that explore the timbre of a t-network when used to filter noise.

There are 2 different circuits in this module, voices 1 to 3 have a pre-vca t-network filter while in voice 4 the t-networks filter applied post-vca.

At each voice input there's a switch which sets which type of input to use, this signal will be used to control an internal VCA hence why the type of setting defined here is important:
1. Trigger - Any incoming CV will be converted into a 1ms trigger as soon as it crosses it's fixed threshold.
2. Mute - This disconnects then incoming signal effectivelly muting the voice.

3. Envelopes - This can be used with CV sources as well as Gate sources and simply follows the input signal.

This incoming signal will then be processed by a slew circuit which adds a decay factor allowing the user to set the "Tail" of each voice.

Trigger mode is mostly dedicated for percussive sounds while the Envelope mode is open to any external enve- lope control and able to control noise swooshes, swirls, crackles and pops simply out of t-networks filtered noise.

Audio inputs are also welcomed to be used as a Trigger/Envelope input.

Diferences between voices:
The first 3 voices also feature a Timbre selector switch: Hat/Snare
In Snare mode all frequencies coming from the t-networks filter pass thru to the output .
In Hat mode it adds a High Pass circuit which removes the mid/bottom frequencies (characteristic of the snare strike) creating a higher spectrum output which is closer to a Hat timbre.
All of these 3 voices are also differently tuned from each other to offer more timbrical options.

Voice 4 is closer to a typical t-networks circuit but this time peculiar one where the noise is gated by the vca and then sent through the t-networks filter.

Hat and Snare are terms used very looselly here, they are timbrical references and do not in any shape or form try to effectivelly replicate the complex timbres of a real world Hat or Snare.
Read more
MRP:$180.39
coming soon $173.19
FORTHCOMING
ADDAC System ADDAC214 VC Rotator Module (red faceplate) ADDAC System ADDAC214 VC Rotator Module (red faceplate)
Notes: This is the VC Rotator, a stepped routing module for any type of signal (audio, cv, gate, trigger...)

Similar to a VC switcher but in this case there's the same number of inputs than outputs so, instead of 4 to 1 or 1 to 4, this module is always 4 to 4 but it can be patched for 2 to 2 and 3 to 3 step actions.

All four inputs get routed to the four outputs depending on the CV and Clock controls and are divided into 4 routing steps:
1. routes all inputs to the same number output: 1:1, 2:2, 3:3, 4:4
2. routes all inputs to an offset of 1: 2:1, 3:2, 4:3, 1:4
3. routes all inputs to an offset of 2: 3:1, 4:2, 1:3, 2:4
4. routes all inputs to an offset of 3: 4:1, 1:2, 2:3, 3:4

Direction determines if the clock input goes forward or backwards.
Going forward it can be set to 2-3 or 4 steps using the Rotate knob offset, going backwards always sync to 4 steps even if offseted by the Rotate knob.
For 2 & 3 step action input 1 is normalled to input 3 and input 2 is normalled to input 4.

Reset resets the internal clock to the first step.

Pendulum, external sequencing or any complex CV actions can be achieved using the CV input and dedicated attenuverter.

4 leds monitor which input is routed to output 1.
Read more
MRP:$180.39
coming soon $173.19
FORTHCOMING
ADDAC System ADDAC307 Heart Sensing Module (black faceplate) ADDAC System ADDAC307 Heart Sensing Module (black faceplate)
Notes: Another addition to the ADDAC300's Expressive Controls Series.

Preceded by the release of the ADDAC303 Muscle Sensing module, this is the second module made to take advantage of the physical body as a control source.

This module originated from a simple idea: using one's heart beat as a control source.

Using a clip-on sensor, that can be attached to a finger or an ear lobe, the user's heart rate will be aquired by sensing the blood flow passing under the sensor. This pulse will generate a trigger and an AD envelope.

Clip-on sensor will be provided with the module.

Tech Specs:
4HP
3.5cm deep
60mA +12V
10mA -12V
Read more
MRP:$180.39
coming soon $174.29
FORTHCOMING
ADDAC System ADDAC805.VS2 VC Signal Router Module (black faceplate) ADDAC System ADDAC805.VS2 VC Signal Router Module (black faceplate)
Notes: Inspired by our ADDAC701 VCO waveform mixing section, our new VC Signal Router also updates our legacy X-Fade/Panner to a stereo configuration that also allows 4 quadrant mixing.

Featuring two dedicated X-faders and a stereo VCA that can also be used as a third X-Fader. All controls have their own CV inputs and dedicated Attenuverters for precision control.

4 quadrant mixing is achieved by using the stereo Master as a X-fader between left and right channels, this way you can plug 4 audio sources and sweep/crossfade between each and any of them using the 3 x-faders. Plug any 4 sources (4 waveforms of a VCO, 4 LFOs, 4 envelopes...) and sweep through morph through or have them all mixed together.

For other configuration types Left and Right X-fader channels can be routed through the Master stereo VCA or sent directly to the outputs. A stereo Direct input can also be routed through the Master VCA or sent straight to the outputs.

The Mono Sum output always mix Left and Right outputs together allowing the possibility to use the module as a peculiar 6 channel mono mixer.

It can be used for both Audio or CV Signals.

Tech Specs:
8HP
4.5 cm deep
40mA +12V
40mA -12V
Read more
MRP:$180.39
coming soon $174.29
FORTHCOMING
ADDAC System ADDAC701.REV2 VCO Module (black faceplate) ADDAC System ADDAC701.REV2 VCO Module (black faceplate)
Notes: This is our new VCO, we discontinued our ADDAC701 VCO a few years back and since we've been wanting to release a more stable version with better pitch tracking increasing pitch reliability further minimizing the detuning issues of analog VCO's.

For this new revision we chose to use the modern version of the CEM3340 ic from CoolAudio and add the triagle to sine circuitry of our previous VCO. This new version is extremelly stable over 7 octaves.

We also added a new Mix section which allows mixing of all waveforms controlled by 3 knobs SIN/TRI, MIX and SAW/RECT.

Tech Specs:
8HP
3.5 cm deep
60mA +12V
60mA -12V
Read more
MRP:$180.39
coming soon $174.29
FORTHCOMING
ADDAC System ADDAC805 VC Xfade/Panner Module (red faceplate) ADDAC System ADDAC805 VC Xfade/Panner Module (red faceplate)
Cat: 776662 • View all Synth modules
 
crossfader & panner module
Notes: This is ADDAC System's new crossfader / panner. It can be used to crossfade between 2 signals or pan a signal from left to right.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 4.5 cm

Electrical:
. Max current: 60mA.
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
.black screws
.black fibre washers
Read more
MRP:$180.39
coming soon $174.29
FORTHCOMING
ADDAC System ADDAC212 EG Map Pack Module (red faceplate)
Cat: 776195 • View all Synth modules
 
VC attentuator/offset module
Notes: A 4 Channel VC Attenuator and Offset.

The ADDAC212 is a 4-channel VC attenuator and off-setter. It lets you deal with up to four parallel inputs as a single pack, modulating their amplitude and offset (± 10V) with the same control knobs, both with cv inputs and dedicated attenuators.

Features 4 parallel VCAs with the same amplitude and offset control knobs and cv inputs with dedicated attenuators.

Idealized to be the perfect companion for Envelope Generators, you can send 4 EGs through it and control the overall amplitude and offset of all 4 envelopes at once. This allows more control over the Envelopes when patching typical synth voices.
Read more
MRP:$202.62
coming soon $194.98
FORTHCOMING
ADDAC System ADDAC204 VC CV Mapping Module (red faceplate) ADDAC System ADDAC204 VC CV Mapping Module (red faceplate)
Notes: With the VC mapping module you'll be able to scale your voltage and also control its offset via CV.

This module provides two outputs for normal and inverted output voltages. A third output morphs between the normal and inverted outputs.

Mechanical:
. Format: Eurorack
. Width: 6 HP
. Depth: 2 cm

Control Voltage I/O:
. CV inputs: i 10v
. CV outputs: i 10v

Electrical:
. Compatible with +-12v and +-15v power supplies?
. Max current: 40mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$202.62
coming soon $194.98
FORTHCOMING
ADDAC System ADDAC203 CV Mapping Module (red faceplate) ADDAC System ADDAC203 CV Mapping Module (red faceplate)
Notes: With the ADDAC203 CV mapping you'll be able to tame that voltage range and put it where it belongs. The attenuation knob compresses your voltage range and then you can also offset it.

Two channels for your mapping needs.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 3 cm

Control Voltage I/O:
. CV inputs: i 10v
. CV outputs: i 10v

Electrical:
. Compatible with +-12v and +-15v power supplies?
. Max current: 50mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$202.62
coming soon $194.98
FORTHCOMING
ADDAC System ADDAC604 Dual Filter Module (black faceplate) ADDAC System ADDAC604 Dual Filter Module (black faceplate)
Notes: While developing the ADDAC105 4 Voice Cluster module, a new multimode filter to place after the summing mix stage- and the results were so postitive that it was released as a dedicated filter.

To make it more interesting, the circuitry was duplicated, to be able to use it in a stereo signal path.

To make it more versatile, a switch was added to set the working mode from Stereo to Dual Mono where both filters can be used independently.

In Stereo Mode the Left Cutoff is used to control the Right Cutoff.
In this case the Right Cutoff Knob and CV Input are simply bypassed and will have no impact on the Right Channel operation.
This allows immediate sync of both filter frequencies when the Stereo position is engaged.
Optionally there's a jumper in it's back that, when placed, connects the Right Controls back to the Right CV control allowing the possibility to control the offset of the Right Channel Cutoff.

Resonance is independent on both Modes and still has to be set manually to match both channels.

Both the Audio and CV inputs are normalled from the Left into the Right channels.
As standard plugging any input to the Right channels removes this connection.

Tech Specs:
6HP
4 cm deep
70mA +12V
70mA -12V
Read more
MRP:$202.62
coming soon $196.07
FORTHCOMING
ADDAC System ADDAC703 Discrete Mixer Module (black faceplate) ADDAC System ADDAC703 Discrete Mixer Module (black faceplate) ADDAC System ADDAC703 Discrete Mixer Module (black faceplate)
Notes: Here's the second module of ADDAC System's 700's Heritage Series.

Inspired by Moog CP3 mixer, this is a totally discrete analog mixer and it's not, by any means, your standard breakfast mixer, although it can behave like one.

This is a wolf in sheep's clothing. Despite its harmless looks there's a dark snarly soul behind that panel that wants to take your sounds into a realm of gritty gnarly growls.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 3 cm

Electrical:
. Max current: 60mA.
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
.black screws
.black fibre washers
Read more
MRP:$202.62
coming soon $196.07
FORTHCOMING
ADDAC System ADDAC303 Muscle Sensing module (red faceplate) ADDAC System ADDAC303 Muscle Sensing module (red faceplate) ADDAC System ADDAC303 Muscle Sensing module (red faceplate)
Notes: This module introduces a totally new interaction principle for the Eurorack format, using electrodes to sense body muscles tension.

You can stick them to your arm and clench your fist, to your leg and tap your tempo, to your band bass player or drummer.

Module ships with electrodes.

Pads are reusable and replaceable.

Specs:
. Width: 4 HP
. Depth: 4 cm
. Max current: 60mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$202.62
coming soon $196.07
FORTHCOMING
ADDAC System ADDAC705 Stinggy Filter Module (black faceplate)
Notes: The new ADDAC System filter, inspired by the original WASP Filter.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 3 cm

Electrical:
. Max current: +12V 60mA, -12V 30mA.
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.

Included:
.black screws
.black fibre washers

Read more
MRP:$247.06
coming soon $239.65
FORTHCOMING
ADDAC System ADDAC401 Gated Envelope Follower VS2 Module (red faceplate) ADDAC System ADDAC401 Gated Envelope Follower VS2 Module (red faceplate)
Notes: With the ADDAC401 Envelope Follower you'll be able to use the volume of any sound source to control your synthesis.

This envelope follower has an interesting twist: besides outputting the volume information through a regular CV output, it also sports 8 independent gate outputs, triggered by the corresponding levels of the VU meter.

You can also control the offset on the gated outputs, either by CV or by steps through a special dedicated gate input.

Input Level and Decay controls allow you to achieve good envelope follower amplitude reaction.

Envelope Gain and Offset allows to set the envelope CV output to any desired CV range.

Monitor Leds for both the CV output and for the digital detection circuit.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 4.5 cm

Control Voltage I/O:
. CV output: i10v
. Gate input: 0 - 5v (threshold: 2.5v)
. Gate outputs: 0 - 5v

Electrical:
. Max current: 110mA +12v & 20mA on -12V
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$258.83
coming soon $250.54
FORTHCOMING
ADDAC System ADDAC302 Nchunk Control Module (red faceplate)
Notes: The ADDAC302 Nchunk Control module allows you to connect a Nintendo Nunchuck controller to your modular synth, featuring a two-axis thumb joystick, a three-axis accelerometer and two trigger buttons.

The module provides CV outputs for all of the Nunchuck's parameters and special functions to remap the CV outputs. The remapping can be both continuous or step-by-step and can be accessed through either the dedicated CV inputs or the manual controls.

A specially dedicated Mix output averages between the first two CV outputs, a very useful feature for continuous control parameters.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 4 cm

Control Voltage I/O:
. CV inputs: 0 - 10v
. CV outputs: 0 - 5v
. Gate in threshold: 2.5v

Electrical:
. Compatible with +-12v and +-15v power supplies
. Max current: 100mA?
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$281.05
coming soon $272.33
FORTHCOMING
ADDAC System ADDAC206 Switching Sequencer Module (red faceplate) ADDAC System ADDAC206 Switching Sequencer Module (red faceplate)
Notes: This is a Quad Channel Switcher.

Among many other possibilities it allows to:

Turn any 4x4 step sequencer into a 16 step sequencer.
Scramble sequences with diferent clock division settings.
Route 1 audio or voltage signal to 4 diferent destinations.
Switch between 4 audio or voltage signals

MECHANICAL:
Format: Eurorack
Width: 8 HP
Depth: 3.5 cm

ELECTRICAL:
Max current: +80mA/-40mA
Bus Board Cable: 8 × 2 IDC (Doepfer style) connector.
Read more
MRP:$303.27
coming soon $293.02
FORTHCOMING
ADDAC System ADDAC210 Open Heart Surgery Module (red faceplate) ADDAC System ADDAC210 Open Heart Surgery Module (red faceplate)
Notes: This is a development platform optimized for the Eurorack electronic enthusiast.

Power sources:
-12V, +12V
-3/10V, +3/10V

Ships with: 1M Ribbon Cable and 55cm standoff Spacers for desktop operation, screws and nylon washers

Mechanical Specs:
Width: 36 HP
Depth: 3.5cm (i1.375 inches) with or without Arduino installed, Depth increases if using arduino shields.
Read more
MRP:$325.49
coming soon $313.71
Items 1 to 50 of 70 on page 1 of 2
1  2  »

Filter

Saved Searches
Save current search
Release Date
Featured
Close