Search dance music

Notes: Blistering Reverb

The original synthetic atmosphere creator. The Reverberation Machine offers up drippy, saturated spring reverbs and cavernous expanses in one small package. Push the Altitude and hear the reverb blasted with gloom and distorted shimmer for the ultimate wall of sound. An instant classic for a reason, the Reverberation Machine's unique and experimental sounds are equally at home twisting your sound into a galactic nebula or adding a sinister and yearning beauty to anything you plug in.

Controls

Vol: Controls the master output volume.
Altitude Control: This is similar to gain. Turn it up to bring in a more wide open, distorted sound.
Verb: Blends in the amount of reverb.
Dark/Light Symbol: Dark cavernous reverberation to bright shimmering reverberation.

**When the Altitude and Verb controls are turned past 12 o'clock, the pedal can produce potentially harmful volumes, white noise, and other artifacts**

Specifications

Dimensions: 4.86" x 3.67" x 2.06" (including hardware).
Weight: 14 oz.
Power: 9V (runs ons a positive ring, negative tip 9V DC adapter or included 9V battery).
Current Draw: 66 mA

Notes: A Re-envisioning of the Filter Effect

Turning its predilection for parallel signals toward the world of filters and widening out to full stereo, Old Blood Noise Endeavors unveils its first digitally-controlled analogue pedal. Float boasts two independently controllable filters and copious capabilities for motion. Utilising the two filters in tandem can create stereo movement, linked reactive elements, and modulations that approach harmonic tremolo and phaser, as well as classic filter sounds.

Old Blood Noise were familiar with some aspects of the filter pedal. But the slow dual motions, the controls that go a little more left than you expect, the parallel undulations and surely other corners were all left unexplored.

So, turning their predilection for parallel signals toward the world of filters and widening out to full stereo, say hi to Float, the new Dual Moving Filter pedal! As OBNE's first digitally-controlled analogue pedal, Float boasts two independently controllable filters and copious capabilities for motion.
Utilising the two filters in tandem can create stereo movement, linked reactive elements and otherworldly psychedelic modulations. The two independent filters can be set to either low pass, band pass or high pass. The core of each filter is its Cutoff Frequency, which can stay still or move via either its 6 different LFO shapes or through its dynamic Envelope triggering.

The envelope sections can unleash quacky auto-wahs, shooting sonic laser beams or organically rising and falling filter landscapes - all triggered by your playing. While the LFOs lets Float become a mind-bending modulation device that can become everything from a phaser, a harmonic tremolo, a choppy or bubbly step-filter or an automated synth-like sweeper. However, skip the Modulation or envelope sections and the dual sliders come into play. This allows you to use Float as a dual-band EQ for subtle to extreme tone shaping, as a manual filter for on-the-fly futuristic filter sweeps or even for old-school wah-tones. Each filter also sports a resonance control, allowing you to unearth velvety smooth filters, vocal-like formants, screaming sonic squelches and anything in between.

All of this is pretty familiar, but also pretty sweet. Like an amalgamation of all things filtery and good. But where things start to get really different and really fun is when you mess with the Sync and Routing of the two filters. By flicking that tiny toggle labelled Sync to On, the two filters will move like tonal twins - locked in, precise and uniform. This lets you create robotic sequencer-like textures, trippy dual modulations or ultra-long, yet perfectly timed, filter manoeuvres. You can also set it to Off and have them completely free-rolling for organically weaving textures or full-on filter cacophonies. In addition, the filters can be run in either parallel mono, series mono or stereo for all kinds of refined dual movements, cascading filter chaos or lush and dreamy stereo sweeps.

To round off this veritable filter playground, we've added an expression in port, that lets you take hands-free control over either the cut-off frequency or LFO Rate, allowing you to keep your fluttery filter modulation as expressive as the music you play.

So, that's Float... or that's the essence of Float. You'll unlock sounds from this thing that you never knew it was capable of, because it does a lot of good, weird, wild, tame, ugly and absolutely stunning stereo stuff. Float on, friends!

Notes: Another banger from Dreadbox's excellent effects series. Stereo echo effects based around multiple hybrid delay stages, giving bags of character for reverb, modulation effects and classic delays.

Supplier's Notes:
Dreadbox Raindrops is a Hybrid Delay/Pitch Shifter/Reverb pedal that takes the concept of short echoes to a different level.

It is equipped with multiple delay stages and different chips and you can choose between 3 different play modes, where in each one you can have a whole new experience and alternative soundscapes. You can achieve from simple short echoes, to long, dirty and lo-fi delays and from simple pitch shifting bursts to extensively lasting reverbs.

Specifications

Circuit: Analogue Dry signal / Hybrid Delay / Digital Reverb
Bypass: Buffered OpAmp
Audio: True Stereo IN/OUT
Inputs / Outputs: TS Unbalanced 6.4mm jack
Power Supply: 9VDC BOSS style center pin negative 2.1mm (NOT INCLUDED)
Dimensions (cm): 14 x 10 x 5.6
Current Draw: 220mA

Notes: Subway is a scanning crossfader with 8 inputs and 1 output.

The eight inputs can be used for control voltages as well as audio signals. A potentiometer or CV can be used to mix between the individual sources. Each of the inputs also has a manual on/off switch.

Application examples

Complex modulations
Waveform selector for oscillators or noise
Morphing waveforms from wavetables
Switching between different envelopes
Controls:

Scan knob - master control over which input goes to the output. The knob is shifted when a CV is applied to the scan CV input.
Enable switch - Controls which input is active. When the LED is off, the input is removed from the output selection. A dim LED means the input is active but not yet selected. Bright LED means that the input is currently being sent to the output.
Curves: Subway has three different curves if you hold down keys 1-3 when switching on and then release them. Button 1 sets a linear curve, button 2 sets an exponential curve and button 3 sets a steady curve.
Power consumption: 80mA at +12V and 22mA at -12V

Depth: 38mm

HP : 6

Notes: Blokan is a ring modulator for Eurorack based on tubes and transformers. It is built like a classic diode ring modulator, but the diodes are tube based.

The built-in VCO provides the carrier signal (saw wave) and can also be tapped using a dedicated output. The VCO provides a voltage control input. The carrier signal can also be replaced by an external signal.

The module sounds different from conventional ring modulators due to the tubes. There may be slight noise and the carrier wave may crosstalk in the output.

Technical

Size: 12hp
Face plate material: 2mm anodised Aluminium
+12v:18mA
-12v:18mA
+5v: 600mA

Notes: Space Bender

Chorus Modulator

LFO in the UFO

The Space Bender chorus modulator replicates and warps your signal into beautiful and organic transmissions from a dimension somewhere beyond linear time.

Under the hood lies an array of dynamically modulated delay lines allowing you to craft subtle vintage sci-fi sounds, bending sonic bedlam, and pulsing atmospheres. Never again will you say this chorus pedal just isn't intense enough! These in combination with the rocker switch settings let you move smoothly through a wide range of effect types allowing for new ways of thinking and experimenting with modulated delay, chorus, and flanger.

Stretch and pull your sound waves to craft glassy bell resonances, massive reverse dive bombs, and seasick demon drones with a simple (but deep) interface. The spectrum of living, breathing sound manipulations stowed within the Space Bender serves as an interstellar gateway for the next wave of musicians to create a universe of haunting and unexplored soundscapes.

See you on the other side!

Specifications

Dimensions: 5" x 2.63" x 2.45" (including hardware)
Weight: 9.3 oz.
Power: 9V DC (runs on standard 2.1mm negative center 9V DC adapter).
Current Draw: 65 mA.

Notes: The uniK 08+ is the result of extensive development work performed in Germany, to provide a professional active reference monitor that defines a new level of quality in its class. With its new 8" kevlar low frequency driver and a new custom engineered and powerful high frequency magnetostatic tweeter, the uniK 08+ offers many improvements over our successful uniK 08 and provides unique sound characteristics that allow this monitor to satisfy the highest demands in a professional studio environment.

What makes uniK 08+ unique?

The uniK 08+ studio monitor offers true full range quality with extended low end in a small case and an entirely new signal processing and amplifier unit with a perfect order low-z and low noise design. Mos-Fet Bi-amplification ensures a high slew-rate and fast setting, featuring true analog vintage sound processing with LC-like gyrator technology for a stressless and silky sound.

A completely new feature is the unique one knob sound character adjustment from smooth to bright, allowing you to change parameters for every room and preference. The additional high resolution High and Low switches add additional control. And of course the uniK 08+ studio monitor features a real precision gain attenuator, instead of a simple volume control.

The new design of the crossover ensures an excellent phase response and safe power limitation, to drive the woofer and tweeter efficiently. The tweeter features a newly upgraded magnetostatic design with extremely low moving mass for extended frequency and fast transient response and high sound resolution. The matching woofer consists of a kevlar composite cone with high stiffness ensuring better piston motion and excellent low-end sound reproduction.

Another new feature is the flexible rubber feet with discrete height adjustment. They are not only helpful to reduce unwanted vibrations, but also allow you to tilt the speaker towards the precise listening point - a great feature for typical near field applications.

Other new special features that are not standard in this class are standby to save power consumption (can be disabled) and a ground lift switch.

And with it's copper color woofer cone and high quality matte cabinet finish, it looks quite uniK, too!

ROOM ADJUSTMENTS

SIDE - TILT UP

SIDE - TILT DOWN


Features
Biamp 2-Way Powered Speaker System
Active Studio Monitor Speaker
HF Driver: extremely low mass magnetostactic tweeter F49 x 26 mm
LF Driver: 8" kevlar curved cone (magnetic shielding type)
Output Power: 140W (HF: 70W, LF: 70W), 160W AC consumption power
Frequency Response: 37Hz - 25kHz
Input Impedance: 27.2kOhm (balanced) / 13.6kOhm (unbalanced)
Crossover Point: 3.2kHz
SPL: 105dB, Peak 108dB
Input Connectors: XLR / TRS 1/4" combo connector, balanced / unbalanced
Gain Control: -14 .. 0dB .. +14
Room Adjustments Control: Character: -6 .. 0dB .. +6; Low: -5 .. 0dB .. +5; High: -5 .. 0dB .. +5
Rear Bass-Reflex ventilation, optimized for near field application
Ground lift switch
Standby function: can be turned on and off
Indicator: multi color LED on front panel, power on orange, standby red
Feet: 4 pieces rubberized, adjustable height separately
Working Voltage: AC100-240V 50/60Hz
Dimensions (W x H x D): 252 x 352 x 319mm
Weight: 8.1 kg

Notes: The J44 models are JICO CUSTOM SHOP brand alternate replacements for the iconic SHURE M44 cartridges. JICO has two products available on the market: the J44A 7 and the J44D. The J44A 7 is designed to be a replacement for the SHURE M447, while the J44D is designed to be a replacement for the SHURE M44G. The JICO J44 models are made to be as close to the actual SHURE M44 cartridges in terms of output performance.

The J44A 7 and the J44D are the same exact cartridge, just as the original SHURE M447 and M44G cartridges. The difference in the sound reproduction is created by the stylus that is used with the cartridge, which produces the distinct sound that is reproduced in conjunction with the J44 cartridges from JICO.

The N-44-7 stylus that is included with the J44A 7 offers a brighter sound than the N-44G stylus that is included with the J44D, with a thicker bass sound-the same difference as with the SHURE 44 cartridges. JICO has followed the structure of the SHURE products to release the alternative replacement. Not only the sound output is as close to the SHURE M44 cartridge models, but the tracking ability of the J44 performs as the same with sticking to a record groove with high jump/skip resistance and low record wear.

The JICO J44A 7 with N44-7 stylus provides a crisp and clear sound in the higher frequencies, with the bass being heavy, bold and pronounced. This gives a lively, vigorous and dynamic sound experience. The J44A 7 produces powerful bass frequencies with a smooth, balanced sound, similar to the specification of the genuine Shure M44-7 cartridge.

Cartridge: J44A 7
Cartridge: Type Moving Magnet
Stylus: N44-7 DJ IMP Nude
Stylus: Type Nude Conical (Spherical)
Tip Size: 0.7 mil
Cantilever: JICO S-Type Aluminium
Weight: 5.6 g
Height: 16 mm
Output Voltage: 8 mV
Frequency Range: 20Hz-20kHz
Recommended Load: 47 kO
Direct Current Resistance: 800 O
Compliance: L8.5 / V7.8
Stereo Channel Balance: 1.5 or below
Channel Separation (at 1kHz): 20 db
Tone Arm Mount: 1/2 inch standard mount
Tracking Force: 3.5-4.5 g
Glow in the Dark: True
Use: DJ (scratching)

Notes: 2000-watt 8-inch 2-way powered loudspeaker with Bluetooth, DSP & app control

TrueSonic TS4 from Alto Professional

Louder. Clearer. Smarter.

Where TS3 exceeded expectations, TS4 redefines them completely. Building on the legacy of our best-selling TrueSonic speakers, the TS4 Series delivers increased power, clearer sound, and advanced Bluetooth functions including streaming, speaker linking, and App control.Compact, lightweight, and designed for reliability, the new TS4 Series makes it simple to get great live sound at every event.
True Sonic Power

Whether you need a powerful vocal PA or club-shaking bass performance for a DJ set, TS4 speakers deliver loud, clear, room-filling sound for any application.

With an 8-inch woofer, and a 1.4-inch compression driver, TS408 delivers 2000W of class-leading power and clarity in equal measure.

Free Alto App for remote configuration and control

Available free for both Android and iOS, the Alto App gives hands-on remote control over Bluetooth levels, Speaker Use Modes, Custom EQ and Sub Size selection. Further, True Wireless Stereo linking can be configured remotely via the app to save time during setup.
Built-In 3-channel mixer

Every TS4 features an integrated 3-channel mixer, with two Mic/Line input channels and a dedicated Bluetooth channel. The Mic/Line channels feature XLR/TRS combo jacks and can be used with microphones, instruments, and line-level signals without the need for additional hardware or adjustment. Just plug straight into the rear panel and you're up and running.

Simple Bluetooth Streaming & Speaker Linking

The ideal high-powered streaming solution, TS4's built-in Bluetooth connectivity makes it easy to pair your laptop, phone or tablet and get the music pumping in no time at all.

With the True Wireless Stereo function you can stream Bluetooth audio to two TS4 speakers in perfect stereo without the need for any cables.

DSP Modes for the best sound in every application

TS4's three preset "Speaker Use" modes let you optimize the speaker for any application, so you'll get great sound every time at the touch of a button. For even more control over your sound, you can configure a Custom EQ within the Alto App and remote adjust the settings from any listening point in the venue. You can even save your favourite Custom EQ setting direct to the TS4 for easy recall whenever you need it.

Versatile and Reliable

From the high-quality drivers to the fanless class D amplifiers, every aspect of the TS4 Series has been designed for superb reliability, whether used for mobile gigs and performances or fixed installation.

Each speaker features a lightweight, sleek, black box design that can be used as the application demands - freestanding, as a wedge monitor, pole-mounted or suspended via the integrated suspension points.

Applications

Solo performers
Musicians and Bands
Mobile DJs
Gymnasiums, fitness centers, and dance studios
Houses of worship
Theatres
Bars, restaurants, clubs
Special events, presentations, and weddings

Technical Specifications

Output Power: 2000W
Low-Frequency Driver: 8.0" driver, 2.0" (50 mm) high-temperature voice coil. 1 x 650 W RMS @ 2 O.
High Frequency Driver: 1.0" exit ceramic driver with 1.4" (35 mm) coil. 1 x 350W @ 4 ?.
Crossover Frequency: 2 kHz
Maximum SPL: 130 dB (peak), 127 dB (continuous) (dB-SPL @ 1 m)
Frequency Response: 62 Hz - 20 kHz (+/-3 dB)
Frequency Range: 52 Hz - 20 kHz (-10 dB)
Horn Coverage: 90- horizontal x 60- vertical (nominal)
Connectors: (2) XLR+1/4" (6.35 mm) TRS combo inputs (Balanced), (1) XLR output (Link), (1) IEC power cable input
Line Gain/Volume Control Range: -? to 0 dB, +4 dBu nominal, +10 dBu for max output
Mic/Inst. Gain / Volume Control Range: -? to +50 dB
USB Charging Port: 5V 2.1A
Controls: Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
Indicators: (1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped),(1) Bluetooth LED (Blue), (1) Link LED (Orange), (4) DSP Presets LED (Green), (3) HPF LED (Green)
Power Connection: IEC
Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz
Consumption: 900W
Fuse: 100-120V T10AL AC250V; 220-240V T5AL AC250V
Protection: Electronic clip, thermal, and transducer overdrive protection
Enclosure: Injected Moulded Enclosure and Perforated Metal Grille
Mounting/Installation: Standard 36 mm pole socket, flown application, suspended with integral M6 points, or in a wedge monitor position
Operating Temperature: 10-C to 45-C (14-F to 113-F)
Dimensions (height x width x depth): 17.2" x .10.1" x 9.6 / 436 x 256 x 245 mm
Weight: 20.7 lbs. / 9.4 kg

Review: There are various eye watering stats about the many, many million copies of this album that have been pressed and sold. For each one sold there is almost as many different versions of it, too, if you look on Discogs. But all the hype and huff aside, there is a reason it is one of jazz's most famous records. The sultry modal moods, the masterfully melancholic trumpet sounds Davis conjures and the noir, late night vibe are all perfectly realised and universally understood. Without it, music at large, let alone jazz, would sound very different.

Notes: This is an exact hardware replica of the Mutable Instruments Marbles.

Notes: MG-30 is the flagship modelling effect processor in the NuX range. Dual high speed processing offers accurate modelling of 30 different amplifier options, including bias tweaking for an extra dimension of response adjustment, all using the proprietary NuX TSAC-HD algorithm. Impulse response programming presents a choice of 8 guitar cabinets, 8 bass cabinets, 8 microphones in 3 different axis positions and even 3 acoustic guitar emulation profiles. Once the main guitar tone is programmed, there are 8 effects blocks which can be assigned to different positions in the signal chain, including WAH, CMP, GATE, EFX, EQ, MOD, DLY & RVB. An expression pedal covers wah and swell effects amongst other possibilities. Each has modes and/or parameters which can be adjusted and saved within the patch as needed. Real-time editing uses rotary encoders and switches, making for a natural and organic process and all prameters and graphics are displayed on a vibrant 4" colour display. Add to this a fully functioning USB audio interface, phrase looper, PC/Mac editor/librarian/updater, aux input, effects loop, drum machine and NMP-2 footswitch control and the MG-30 covers practically all bases. This unit provides all the processing power and audio quality that could be asked from any professional guitar processor at a fraction of the price of its component features.

Specifications:

Power supply: 9Vdc, 400mA pin-negative (adaptor included)
Inputs: 6.3mm jack (guitar), 3.5mm jack (aux input)
Outputs: 2 x 6.3mm jack (L/mono + R) to amp or mixer
Sends: returns: 6.3mm jack send (1k ohm) & return (220k ohm)
Headphone output: 3.5mm stereo jack
USB port: USB type-C for audio interface, PC/Mac editing & updating
Remote control connection: EXP1 TRS 6.3mm jack
Sampling format: 48kHz, 32-bit
Frequency response: 20Hz - 20kHz (i1dB)
Input impedance: 1M ohm
Output impedance: 1k ohm
Dynamic range: 110dB
Dimensions: 313 x 166 x 54mm
Weight: 1.5kg

The box for this item contains :

MG-30 multi-effects modeler pedal
1 x 9Vdc power adaptor (UK)
1 x NMP-2 dual footswitch (173.352UK)
1 x patch cable
1 x USB cable

Notes: This is an exact hardware replica of the Mutable Instruments Plaits module.

Width: 12hp
12V: 50mA
-12V: 5mA

Notes: ADDAC711 is a dual channel Isolated DI box and is all about keeping the sound coming into your Modular free from any undesired noisy interferences, making sure that what you're getting from your inputs is what your external hardware is actually producing. It provides galvanic electrical isolation between the Modular system and external sources preventing impedance mismatch and ground loop induced hum. ADDAC's 711 circuit is designed around a unity 1:1 type Low-cost Audio Transformer operating in the 20 Hz to 20 KHz range, this impedance matching transformer provides two fully balanced outputs (via XLR connectors).

There are two independent channels on the module with:
Audio Output
Signal overload warning led
LIFT/FLOAT/GND toggle switch
Gain control
XLR Input

The LIFT/FLOAT/GND 3-way switch lets you choose between lift, ground or floating ground. In the LIFT position (left) the module circuit will be "lifted" to ground through a 100R resistor and a 10nF capacitor. In the FLOAT position (middle) Ground will not be shared leaving ins and outs grounds completely apart from each other fully isolating both signals.
In the GND position Ground will be shared between inputs and outputs, here no isolation is used. Any of these three positions may be the best form of avoiding ground loops or any other undesired interference occurring between your modular and the external hardware. Try out which one of these options will work best in any given situation.

The importance of using Audio Transformers

Applying a transformer balanced input isolation has lots of advantages over other less expensive ways for dealing with ground loop issues. This method provides the chance to set a very simple and cleancircuit in which the signal transfer process develops smoothly and humming free. The transformer is a device that performs both signal balancing and high-to-low (or vice-versa) impedance conversion, while rejecting straggled DC voltage and Radio Frequency Interference from signal passing through a magnetic bridge. In a transformer, two (or more) coils (called windings) of insulated wire wound around a magnetic metal core allow for its input(s) and output(s) not to be physically connected together. When an AC signal passes through the input winding (the primary), a perfectly related AC signal appears on the output winding (the secondary). This way, by the fact that signal flows via inductive coupling between the two windings of the transformer, this module presents a most accurate electrical isolation between its input and output. A same number of windings on each coil guarantees that there's no gain loss when audio signal passes from the primary to the secondary windings. Furthermore, since these two windings are insulated from each other, the transformer will electrically isolate ADDAC711 from any other device, preventing hum problems coming from an outsider ground. Being a low-cost transformer the frequency response curve is not completely linear, still the -0.2dB
attenuation at 50Hz feels negligible.

Notes: Like the Iguana that's malleable to its environment, blending into its surroundings for harmonious balance or standing out with vibrant confidence, the Polychrome Flanger is a uniquely colourful tool for adding modulated textures to songs.

The Polychrome Flanger is a true bypass, all analogue Flanger pulling in familiar layout controls from the Julia and Lillian.
Dial in a wealth of colourful flange with the D-F-V blend knob and the shape and voice switches.
The Shape Switch lets you select from sine, triangle, or random LFO wave to modulate the delay line

The Voice Switch lets you select between two voices for the flanging effect.
In the down position, the flanger is more traditional and full frequency.
In the up position, you get a more complex and notched flange effect with less low end.

Like the other members of the Walrus Audio modulation family, the Polychrome has a blend knob. The D-F-V (Dry, Flange, Vibrato) knob lets you blend the dry and delayed signal from full dry at minimum (no effect), to traditional flange at noon to full pitch vibrato at maximum. Don't sleep on the vibrato sounds in the Polychrome.
Set the D-F-V knob to maximum, feedback to a minimum, and the voice switch up for some unique pitch vibrato.

Top mounted input, output, and power jacks as well as soft switch relay bypassing make the Polychrome fit well on your board and ensure smooth operation for years to come.

Specs
The Polychrome comes in a flat black enclosure with purple, yellow, coral, green and white ink, featuring original artwork by David Huttner.
Power supply not included.

Dimensions and power consumption:
0.25kg
6,6 x 12,2 x 5,6 cm (W x D x H)
50 mA

In the box:

Walrus Audio Polychrome
Manual
Sticker
Guitar pick
Pouch

Notes: Built to last, the MIDI Fighter Twister features 16 endless rotary encoders, each of which doubles as a button. Available here in a sleek white finish.

Supplier's Notes:
Flexible MIDI control for all creative uses
16 high resolution Chroma Cap encoders
Integrated push switches on every knob
Full LED feedback that syncs with software

With four banks of 16 encoders, the Midi FighterTwister allows control of any parameter in any software. You can easily customize layouts to suit your favorite setups, giving you a smooth and intuitive workflow.

What Makes The Twister Great?

Perfect studio addition for any level producer or musician
Out-of-the-box compatible with ALL major music software
Great for DJs that want to expand their setup and get creative
Fully customizable!

Complete Control

Four banks of 16 high-resolution encoders with a configurable button on every knob. Little space, lots of control.

Dynamic LED Feedback

Multi coloured LED rings that provide clear feedback on a knob's position. Always know what's happening without getting lost in the software.

Easy to Integrate

Compact and completely USB-powered, the Midi Fighter Twister is easy to fit into any gear bag and integrate into every work flow.

Professional Grade MIDI Controller For Music Software

Professional musicians use MIDI controllers so they don't waste creative time clicking a mouse. The Midi Fighter Twister is one of the most popular MIDI controllers available and works great with Ableton,Traktor, Resolume and all other software that support MIDI Input and Output.

Provides valuable visual feedback - You know what's happening in the software.

Plug and play - Works out of the box without any power supply.

Professional Grade - Trusted on stage and studio by the best in the world.

Why Musicians Swear By The Midi Fighter Twister

Touring artists around the world including Satori, Weval and KINK rely on the Midi Fighter every night to play their music. Why do so many choose the Twister?

Custom map your set - Unlike other controllers, you can map Ableton to the Twister in the way that's most intuitive for you.

Keep the laptop to the side with visual feedback - The Twister provides visual feedback for how knobs and sliders are positioned in Ableton, allowing you to keep the laptop off to the side.

Control your entire set with 16 knobs - The Twister provides an enormous amount of control over your set with 16 knob in a small format.

Double The Controls

Four banks of 16 high-resolution encoders with a configurable button on every knob. Small space, lots of control.

Dynamic LED Feedback

Multicoloured LED rings that provide clear feedback on a knob's position. Always know what's happening without getting lost in the software.

Rock Solid Construction

Built with the highest quality parts in the world, the Midi Fighter has been built to play hard by professional musicians and DJs.

More Control - Less Gear

Alps (the most trusted maker of knobs) built custom knobs for the Twister that are smooth as butter and can be pressed like a button. The only ones on the planet, these two controls double your creation power, and makes it easy to play music without thinking.

Turn on an effect, and control it - with the same knob.

Get very precise - Pressing the knob can switch to high resolution mode for precise EQ adjustments.
Two knobs in one - Start by turning up the reverb, and then hold down the knob and that same turn can now control a filter.

Deep Customization

The easy to use utility allows you to customize what each knob/button does for totally personalized control.

Three In One

On the Twister one knob can equal up to three controls, giving you a lot of power in a small space.

Automatic Mapping

On Mac computers the Twister will automatically turn any knob you select with your cursor. No more mapping hassles.

Why Is An Endless Encoder So Powerful For Music Making?

The "Endless Encoder" is a knob that keeps turning forever without any clicks or stops. This allows one knob to control ANYTHING in your software, from filters to tempo.

Always In Sync

Adjust a knob in Ableton, and the encoder will instantly update to reflect the change. Only endless encoders can do this.

Your Versatile Friend

Each encoder can be three different styles of knob, and is always there for you when you need it.

16 Encoders = 64 knobs

Because encoders change postition as you switch pages (unlike fixed knobs) you actually get 64 controls in one tiny space.

Technical Details

Key Features:
16 high resolution encoders with integrated push switch and LED feedback
6 side mounted function keys
Highly portable form factor
USB bus powered - no wall adapter required
USB 2.0 Type B connector (cable included)
Artists Are Saying:
"The Midi Fighter Twister is exactly what was missing from the world of CC based controllers. The push encoders are the perfect nexus of button and knob, cleverly programmable and designed with the level of quality and polish characteristic of DJ Tech Tools." - Ill Gates

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Zoom's top-of-the-range handheld recording option, the H6essential records up to six tracks via built-in stereo mics and four mic/line inputs. Top quality 32-bit/96 kHz recording quality.

Supplier's Notes:
Zoom H6essential Handy Recorder

The Flagship - Zoom's most robust handheld recorder, the H6essential is a recording powerhouse. With 6 tracks of 32-bit float recording, the H6essential provides unprecedented quality and unmatched versatility.

Features

6-track 32-bit float recorder with Dual A/D Converters
Clip-free recording with no need to set gain
Records up to 96kHZ sample rate
Interchangeable Mic Capsule System 3.0 with 32-bit float support
Included X/Y Mic Capsule captures up to 135 dB SPL
4 XLR/TRS combo inputs with locking connector
Colour LCD Screen
Built-in mixer to adjust each track's audio level
Built-in speaker for quick reference playback
3.5mm headphone output plus 3.5mm line output
Voice Guidance accessibility for the visually impaired
32-Bit Float audio interface for PC, Mac, iOS, and Android devices via USB-C port
Use as an interface and record to SD card simultaneously
Using the BTA-1* Bluetooth Adapter, sync with wireless timecode devices via bluetooth
Use the BTA-1* Bluetooth Adapter to pair with the H6essential Control App for iOS
Record to SD cads up to 1TB
10 hours of battery life on AA battery (2x) or USB-C Bus Power
*Please note: BTA-1 Adapter not included

Outputs you need

Use the line output to connect to a camera and the headphone output to monitor your audio.

Quieter controls

Recording and rotary controls have been meticulously designed to allow for silent operation.

Onboard speaker

Use the improved onboard speaker to listen to your recordings for quick reference.

Six perfect tracks

The 4 XLR/TRS combo inputs feature ultra-clean Zoom preamps, and the included X/Y microphones can capture up to a booming 135 dB SPL, equivalent to a jet taking off.

Record and stream

Use the USB-C port to connect to PC, Mac, iOS, and Android device to use the H6essential as a 32-bit float interface while simultaneously recording all 6 tracks to an SD card.

Pair with your iOS device

Use the BTA-1* Bluetooth Adapter to pair with your iOS device to remotely hit record, adjust your mix, view your waveforms, and change settings.

Bluetooth timecode

With the BTA-1* Bluetooth Adapter you can also pair with Bluetooth timecode devices for audio and video sync. *BTA-1 Adapter not included.

Specs

Input & output channels

Inputs
Mic capsule: 1
MIC/LINE (mono): 4

Outputs
LINE OUT: 1
Headphones: 1
Built-in speaker (mono): 1

INPUTS
XY mic: XYH-6e: 90O XY stereo format
Directionality: Unidirectional
Sensitivity: -42dB/1Pa at 1kHz
Maximum sound pressure input: 135 dB SPL

MIC/LINE (mono)
Connectors: 4 XLR/TRS combo jacks (XLR:2 HOT TRS:TIP HOT)
Input gain: Adjustment unnecessary (dual A/D converter circuits used)
Input impedance: MIC: 3.8 kO or more, LINE: 39 kO or more
Maximum input level: MIC: +4 dBu, LINE: +24 dBu
Phantom power: +48 V
Channel total: 32 mA or less
Equivalent input noise MIC: -120 dBu or less(IHF-A) @150 O input, LINE: -95 dBu or less(IHF-A) @600 O input

OUTPUTS

LINE OUT
Connector: Stereo mini jack
Maximum output level: +1 dBu
Output impedance: 110 O or less

Headphones
Connector: Stereo mini jack
Maximum output level: 20 mW + 20 mW(when 32 O load)
Output impedance: 10 O or less

Built-in speaker
Type: 20 mm x 30mm elliptical dynamic speaker
Effective maximum output: 250mW

RECORDER
Maximum simultaneous recording tracks: 8
Maximum simultaneous playback tracks: 6

Recording formats:
WAV
44.1/48/96 kHz,
32-bit float mono/stereo
BWF and iXML formats supported

Recording media: 4-32GB cards compatible with the microSDHC specification, 64GB-1TB cards compatible with the microSDXC specification

Display: 2.0-inch full-colour LCD 360 x 240

USB
Connector: USB Type-C - Use a USB cable that supports data transfer.
Audio Interface : USB 2.0 High Speed
Input and output channels: 6 in / 2 out (Multi), 2 in / 2 out (Stereo)
Sampling frequency: 44.1/48/96 kHz (AIF only), 44.1/48 kHz (AIF + onboard recording)
Bit depth: 24-bit, 32-bit float
File transfer: USB 2.0 High Speed

Remote

Dedicated wireless adapter: ZOOM BTA-1

Power

4 AA batteries: Alkaline, lithium or rechargeable NiMH batteries
AC Adapter: ZOOM AD-17 (DC 5 V/1 A) - USB bus power is supported.

Estimated continuous operation times using batteries: 2-track recording (XYH-6e)
Alkaline batteries: About 18 hours
NiMH batteries (1900 mAh): About 14.5 hours
Lithium batteries: About 30 hours

48 kHz/32-bit float with phantom power off, no headphones, no LINE OUT, no REMOTE, Power Saving on, Display Brightness Medium
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.They will vary greatly according to use conditions.

Estimated continuous operation times using batteries: 6-track recording (XYH-6e and inputs 1-4)
Alkaline batteries: About 3.5 hours
NiMH batteries (1900 mAh): About 4 hours
Lithium batteries: About 9 hours
48 kHz/32-bit float with phantom power off, headphones used (33O load), no LINE OUT, no REMOTE, Power Saving on, Display Brightness Medium
These values are approximate.
Continuous battery operation times were determined using in-house testing methods.They will vary greatly according to use conditions.

Power consumption: 5 W maximum

Dimensions
Recorder: 78.1 mm (W) × 160.1 mm (D) × 42.8 mm (H)
XYH-6e: 69.1 mm (W) × 50.8 mm (D) × 43.0 mm (H)
Weight Recorder: 381 g (including batteries)
XYH-6e: 42 g
Note: 0 dBu = 0.775 Vrms

Notes: The OpticTone is a combination of a 12dB multi-mode Vactrol Filter and a Vactrol Voltage Controlled Amplifier.

It is a completely original circuit inspired by the singular nature of Vactrols and their fluid and natural character.

The Filter section provides the three fundamental filter types: Lowpass, Bandpass and Highpass.

A Resonance knob with voltage control input is available for improved modulation flexibility. The feedback knob interacts with the Resonance path, tempering it from creamy resonance to wacky self-oscillation.

Filter and VCA run in parallel, both are controlled by the Freq/Amp knob and it's associated voltage-control input. The combination of both signals can be crossfaded with a dedicated knob.

The Freq/Amp is also controlled with direct touch control on the panel via the 3 lines below the knob.

The filter frequency control can be inverted by the Inv Freq switch, providing the possibility to change the filter direction. This feature allows the filter to "close" when the VCA is "opening" or the other way around.

The Ping input allows to generate the well known vactrol filter percussive sounds if a gate or trigger signal is provided. The Ping frequency if controlled by the Freq/Amp knob, ranging from low kicks drums to high pitch bongos.

There is also a Drive knob to take care of your saturation needs. The Overdrive range is wide, from soft textural clipping to heavy distortion.

All voltage controlled inputs have an attenuator-inverter knob.

Features:

Vatrol based 12dB multi-mode Voltage Controlled Filter: Lowpass, Bandpass and Highpass.
Vactrol Based Voltage Controlled Amplifier.
Crossfade between VCF and VCA section.
Voltage controlled Resonance.
Ping Input for percussive sounds generation.
Cutoff Frequency polarity inversion switch. Doesn't change VCA polarity
Overdrive and Feedback controls.
Attenuator/inverter knobs on all voltage controlled inputs
Touch control over Frequency and Amplitude.


Specs:

Width: 10HP
Depth: 33mm
Power consumption: 55mA +12 / 55mA -12
Eurorack Format
Doepfer power connection

Review: Linkin Park were many people's favourite rock act at least for a short time during their rebellious teenage years. Well, it is now two decades since the American outlaws were at their peak and specifically 20 years since they released their second and globally acclaimed album Meterora. As such it gets a special anniversary reissue here that features all of the original material as well as four previously unreleased concerts on DVD, plus rare and unreleased material that will be all nee to even the most hardcore of fan. A real must for collectors.

Notes: Mar Karit is a tube pedal preamplifier.

It contains 2 tubes, one NOS EF86 for the preamp section and one 6J1P (6ak5) for the buffer output. It is an all tube Preamp.

It runs on a 9V power supply (center positive) - and operate internally at 35volts. Furthermore, it produces a warm, rich, and full-bodied sound, and can capture both the softest and loudest sounds with great accuracy and clarity.

Pushed a little too far, it can produce pleasing harmonic distortions and warm saturations. The two volume knobs control the level of each stage.

All tube preamp
EF86 and 6J1P
High end components (Nichicon, Panasonic caps, Alpha pots and Switch, Rean Jacks...)
Made in France
True Bypass
9V DC / input power supply positive tip

Notes: Analogue tones are on the menu with this beautifully designed bucket brigade chorus/vibrato. Warm, organic sound with lots of modulation options and expression pedal input.

Supplier's Notes:
The Tempest features a full analogue pitch shifting circuit designed around a BBD chip

Offers digital control and 4 different RAMP options over Rate, Depth or Blend.

Expression or Ramp are selectable via firmware, and the expression jack can be used for external tap/ramp & engage control.

Lag Control
4 different wave shapes
Tone control
Blend 100% dry CCW, 100% wet CW and rich lush chorus at 50%
Rate, Depth and Blend ramping engine
Tap tempo w/subdivisions
Ramp up, Ramp down, bounce up&down, bounce down/up
EXP or CV input jack to control over ramp parameters
Soft switch with relay bypass, momentary & latching operation
Top mounted jacks

Notes: A Juno-inspired oscillator module? We're flattered, but credit has to go to Roland for this one. Based on the Juno-106's digitally-controlled analogue oscillators, the Castor & Pollux modernises the 80s design with a built-in LFO and hard sync.

Supplier's Notes:
Twins that dance in and out of phase, never completely together but never fully apart, bound to each other in the infinite universe.

Castor & Pollux is a dual oscillator that echoes back to the legendary Roland Juno but shines with its own unique, massive voice. It contains two digitally-controlled analogue oscillators implemented using a faithfully modernized version of the original Juno 106 design. It builds on the classic '80s sounds of its inspiration by using the second oscillator and internal LFO to layer in thick detuned sounds and harmonically complex hard synced waveforms.

Castor & Pollux II brings a redesigned interface and moves individual waveform outputs to an included expansion. Both versions have the same features and use the same firmware.

14 HP
+12 V @ 100 mA, -12 V @ 35 mA
25 mm deep
2 separate oscillators
7 octave range
9 total outputs with waveform outputs and onboard mixers
Pitch CV input jacks (0 V to 6 V) and pitch knobs (-1 to +1 octave, configurable)
Pulse width CV input jacks and knobs
Hard sync
Hardware chorusing
Internal low-frequency oscillator (LFO)

Notes: Particles, is 4 channels of trigger modulation, capable of mathematically variating and manipulating your patterns with a combination of features to play with.
It can evolve your rhythmic idea into more complex and groovy patterns which are difficult to achieve without music knowledge.

You can create your algorithms from the rhythmic tools provided to be able to change the patterns instantaneously in many ways without worrying to sacrifice
the original idea.

You can shift and scramble the outputs, you can repeat the triggers with different time signatures to transform the grooves, mute in different ways, disappear by probability trigger inputs, disappear by probability repetitions, use sequential switching to shift randomly with a different kind of resetting, bypass each channel and set it individually the amount of each feature per channel when feeding external CV.
The idea of Particles, was designed to provide features for building complex breaks, grooves, organic-evolving percussion sounds, and different options for
arpeggios, and even bass line grooves, the limits are decided by you.

Particles Features

4 trigger inputs/outs.

Repetitions with different distribution times to choose from.

Manually shift the output channels, scramble them randomly or clocked them in forward mode.

Reset the outputs to 4 different shift modes.

Disappear repetitions by probability per channel.

Disappear the input trigger by probability per channel.

Mute each channel with clock divisions from the input clock.

Mute manually the outputs

Disable triplets from repetitions to have musical patterns

Random voltages output clocked from clock input.

The slider keeps the adjusted value from each feature.

Notes: Particles, is 4 channels of trigger modulation, capable of mathematically variating and manipulating your patterns with a combination of features to play with.
It can evolve your rhythmic idea into more complex and groovy patterns which are difficult to achieve without music knowledge.

You can create your algorithms from the rhythmic tools provided to be able to change the patterns instantaneously in many ways without worrying to sacrifice
the original idea.

You can shift and scramble the outputs, you can repeat the triggers with different time signatures to transform the grooves, mute in different ways, disappear by probability trigger inputs, disappear by probability repetitions, use sequential switching to shift randomly with a different kind of resetting, bypass each channel and set it individually the amount of each feature per channel when feeding external CV.
The idea of Particles, was designed to provide features for building complex breaks, grooves, organic-evolving percussion sounds, and different options for
arpeggios, and even bass line grooves, the limits are decided by you.

Particles Features

4 trigger inputs/outs.

Repetitions with different distribution times to choose from.

Manually shift the output channels, scramble them randomly or clocked them in forward mode.

Reset the outputs to 4 different shift modes.

Disappear repetitions by probability per channel.

Disappear the input trigger by probability per channel.

Mute each channel with clock divisions from the input clock.

Mute manually the outputs

Disable triplets from repetitions to have musical patterns

Random voltages output clocked from clock input.

The slider keeps the adjusted value from each feature.

Notes: dsp.cpoffee's custom everything-including-kitchen-sink dsp development platform.

At the core of this is an Electrosmith Daisy Patch Submodule, combined with a 12-bit 4 channel SPI DAC [DAC7554], and supporting hardware for more IO

Features
- 8x pots normalled to +5V
- 8x CV in breaks normalled connection and pot acts as an attenuator
- 2x gate in
- 2x gate out
- High-fidelity stereo in/out (Daisy Patch Submodule, using an WM8731 codec)
- 2x 12-bit CV out from Daisy Patch Submodule, scaled to -5v to 10v
- 4x 12-bit CV (or lofi audio w/ some hacking) from external DAC7554, scaled to -7v to 7v
- TRS MIDI in/out (in is auto-sensing for type a/b)
- SD card slot
- Expansion header for +5v, +3v3, SPI, UART, I2C, and USB connections

Notes: AGOGO is a pack of 8 vactrol low pass gates in an open design configuration.

Why:

To bongo.
To enhance and enrich a weak audio source.
To create sub-mixes of up to 8 inputs.
To send a single source to many outputs and modulate each one of them individually.

With:

Multiple fixed waveforms - use the individual LPGs as a CV scanner.
Stereo sources - control them with a single CV input.
EOC pulses and triggers - this is where it gets percussive.
Slow modulations - take advantage of those vactrols and their natural decay.

How:

"I", the inputs row is normalized from top to bottom.

An input inserted in the first socket will be copied unaltered to the next one.

If a jack is plugged in it will break the normalization.

"V" is for control voltages and they cascade the same way as the inputs following to natural decay of the vactrol response. All the LPGs can be opened simultaneously with a single CV source. Combining the features of both "I" and "V" rows you can control a signal with 8 different CVs or 8 different sources with the same CV.

"O" stands for outputs. They act as an active mixer letting you combine up to 8 signals. As in the previous two rows, the connection can be interrupted in any given point to create sub mixes or individual outputs.

Since Jolin are actively summing copies of the original input, each LPG stage will add saturation to the final out. Thanks to the open design path and normalizations this is just an additional feature: all the LPGs can still be used individually or in multiple combinations for multichannel effects or other creative application. More AGOGOs can be chained together thanks to headers on the back to multiplicate the number of inputs/outputs.

Dimensions:

6 HP
28 mm deep

Current Draw:

150 mA +12V
90 mA -12V

Notes: Part of Sonicware's excellent Liven series, the Bass & Beats packs a powerful wavetable synth engine designed for dance music. Presets are classified by genre, making it quick to nail sounds.

Supplier's Notes:
Unleash this wavetable engine to create thick basslines that fit into all genres.

Combine wavetable modulation and our rich resonant filter to create satisfying growls and wobbles.

The bass synth engine includes:
- Two independent Wavetable oscillators with the 64 available wavetables.
- One sub-oscillator
- One noise generator which can create 16 different noise types.

Add even more flavor to your basslines with the built-in LFO, envelope generator, unison control, multi-mode filter, and distortion effects.
A Library of Rhythm Sounds Specialized for Electronic Dance Music

The Liven Bass & Beats is loaded with 350 high-quality rhythm sounds carefully selected for modern and timeless compositions.
The library of drum sounds also include risers and tension releases SFX which are useful tools when transitioning to new sections of your compositions.

Hit the Ground Running With 64 Bass Patches That Cover All Genres

The LIVEN Bass & Beats includes 64 bass presets including battle tested favorites such as the Reese Bass, Future Bounce Bass, Wobble Bass, Growl Bass, Neuro Bass, Deep House Bass, Acid Bass, 808 Sub Bass, and more.
Use these presets to quickly dial in the vibe of a specific genre.

Ready-To-Go Preset Drum Kits

The drum sounds are organized into well balanced kits for specific genres such as: DUBSTEP, HOUSE, HIPHOP, TRAP, TECHNO, EDM, R&B, DOWNTEMPO, CHILL TRANCE, DRUM'N'BASS, JUNGLE, FUTURE BASS, ELECTRO, ELECTRONICA, IDM, DISCO, BREAK BEATS, etc.

You can also mix and match sounds from the drum library to create your own custom kits. Side-Chain Compressor

The LIVEN Bass and Beats has built-in sidechain compression function that ducks the volume of the bass and the line-in audio. The amount of this effect is variable so you can dial it in to taste or turn it off when it is not needed.

Two Performance Knobs Can Be Mapped to Many Parameters at Once

Two ASSIGN knobs are provided for complex multi-parameter control.

Similar to the Turnado1 VST plugin, our "ASSIGN" knobs allow you to map many parameters to a single knob to create powerful effects which transform or mangle your sound with a single twist.

All preset patches include these "ASSIGN" knobs pre-programmed and ready for sonic exploration.

The "ASSIGN" knobs can also be parameter locked to create automated changes to multiple parameters over time.

Quick Muting and Un-Muting for Each Drum Sound

Each rhythm track consists of 16 individual drum sounds. Each sound can be individually muted and unmuted with a single button press. This allows users to introduce drum elements on-the-fly to build energy and create unique breakdowns.

Dedicated Mixer Controls

Dedicated controls for balancing the levels of you drums, bass, and line input. These knobs can be used to create an overall volume balance, or they can be used to create drops and breakdowns during live performances.

Advanced Bass Shaping Tools

The DIMENSION knob increases the stereo width of the bass synth without losing clarity or richness.

The M.Gun effect uses a rapid tremolo to add glitchy grit.

Explore Beyond the Preset Sounds With the Bass Engine Edit Mode Overlay

Build your own bass sounds from scratch or modify the presets.

Every parameter of the bass engine is accessible when the edit mode active.

Slip on the overlay and enter a whole new world of bass sound design.

Synth Engine Basic Configuration

2x Wavetable OSC: Each of the wavetable oscillators can assigned one of the 64 wavetables.

SUB OSC: The sub-oscillator provides solid, foundational bass support.

It can generate sine, triangle, sawtooth, square, LOG, and random waveforms.

NOISE Generator: The noise generator can generate 16 different types of noise, including both white and pink noise. It is a powerful tool for aggressive and industrial tones.

Deep Modulation

Almost all of the internal parameters of this device can be targets for modulation. The LFO, Envelope Generator, and ASSIGN knobs provide a wide range of ways to modulate every aspect of your sound.

For example, the LFO could modulate the settings of the Envelope Generator which is simultaneously modulating the Bass engine's wavetable position.

Notes: Great value from this curious little semi-modular FM synth. Two carriers, two modulators and virtual analogue delay give you plenty of creative power. Ideal for drones, weirdo synth parts and special FX.

Supplier's Notes:
The Mystic is an experimental FM synth with 2 carrier frequencies, 2 modulators, and an analogue-style delay. All of the synth parameters are controllable via cv as well as time control in the delay section.

The Mystic generates colossal waves that swirl, echo, ascend, and plunge into an ever-changing, sonic playground. Transcend reality and let the mystic guide the way!

Powering Tip

The Mystic uses a 9VDC, negative-tip, 200ma power supply. It is a standard Boss-style power supply used for most effects pedals. The power supply is sold separately.

Once plugged in, the Mystic is powered up and ready to go. Simply unplug it from the wall when not in use.

Output: line level

A note about the output level

The Mystic runs at line level, to be used with pedals and other devices that also run at line level. If using with Eurorack, the output level needs to be converted, just as you would with any guitar pedal.

There are several Eurorack modules that do this, but the one Recovery use and recommend is the Strymon AA.1.

Output jack

The Mystic requires a 3.5mm cable to connect the audio output to other devices.

Latching switch

Use this to latch the sound on and off. Up is on, and down is off.

Controls

Carrier frequency controls

Each carrier works together to build a waveform. Usually it's CF2 that responds to pitch tracking, but that can vary depending on the setting. Think of CF1 and CF2 as 2 sign waves being folded in various ways. Sending independent CV into each one will not get traditional 1 v/oct pitch results, but a combination of pitch, texture and tone.

Modulator controls

These are used to shape the tone and texture of the folded waveform you've created with CF1 and CF2. Modulation rate will control the speed of the modulation texture.


Momentary button

Use this to momentarily turn sound on and off. The momentary Button only functions when the Latching Switch is in the off (down) position.

Latching switch

Use this to latch the sound on and off. Up is on, and down is off.

Delay time controls

Controls the delay / echo time.

Delay feedback

Controls the number of delay / echo repeats.

Delay mix

Controls the volume of the delay / echo signal.

Volume

Controls the overall output volume of the Mystic.

CV controls

These will accept CV voltage of up to +5 volts. The parameter you are controlling should be at 12 0'clock to get the most effect from the voltage input.

Notes: Distortion and reverb meet in this unique pedal, sporting a joystick to tweak the sound and the option to flip the order of the two effects in the signal chain. Simple, quirky and effective.

Supplier's Notes:
Walrus Audio give you the two most quintessential effects that yield unruly amounts of power and influence to an instrumentalist: reverb and distortion. They have been harnessed and woven together for an eternity of ethereal power with The Melee: Wall of Noise. The Melee unapologetically uses a joystick to meld reverb and distortion into one massive blaze of sound. With the flip of the order switch, run the distortion into the reverb or reverb into distortion; signal chain is your call now. For the explorer, the Melee can run one of three different reverb programs Ambient, Octave, and Reverse.

In a less is more approach, Walrus Audio have intentionally decided on controls that are fun to use and will inspire a wealth of creative output. Use the joystick to control the amount of distortion by moving it up and down. Moving the joystick left and right will adjust your reverb mix. The tone and decay toggles have low, medium, and high settings. Modulation can be added to the wet signal by holding down the bypass switch and moving the decay toggle. The left position is no modulation, the middle is a slight modulation, and the right is a high modulation.

Algorithms

The Melee is equipped with three different reverb programs, which can be changed by simultaneously pressing the bypass and sustain stomp switches. Experiment with the order toggle switch to hear how differently these all react in front and after the distortion!

Ambient Reverb (Pink LED) - Huge reverb capable of massive trails and engulfing your chords into an angry wash of sound. Great for soaring melodic lines or shoegaze-driven chord progressions.
Octave Down Reverb (Yellow LED) - Similar to the Dark mode in the Slo, you'll find an eerie lower octave hovering in the reverb trail for a nice and dark atmospheric touch.
Reverse Reverb with Feedback (Blue LED) - Add reversed reverb trails back into your signal, create gentle melodies or push into reverse feedback overload. Big, slow, and sad chords love to hang out here.

Momentary

Press and hold the sustain switch to ramp up the reverb trails. Release and the trails will ramp back down to where the decay switch is currently set. The sustain switch can also latch in all three programs. Press and release the Sustain switch to capture and sustain the current reverb decay for long pad-like sounds in your wet mix. Press again to release the latch, and the reverb trail will taper off based on the position of the decay knob.

Specs

The Melee comes coated in a glossy neon pink enclosure with white, yellow, and green inks with art by
David Huttner.
The die-cast enclosure's exact size is 3.62" x 4.79" x 3.14" (including joystick height).
Three bypass modes, DSP, DSP + True, True Bypass
Power requirements are 9VDC, centre negative (200mA minimum).
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Power supply not included.

Review: If any album is more fitting of a deluxe reissue than a lavish prog record from the 70s then let us know. This brand new anniversary edition of Pink Floyd's seminal classic Dark Side of the Moon documents the band's best era in the best possible sound quality yet. The bumper package includes a vast book, booklet, stickers, many different formats including live DVDs and a hardback tome from Thames & Hudson making it a truly definitive edition of one of rock's most landmark albums. One for the hardcore collectors out there for sure, although the power of songs like 'Money' and 'Us and Them' means it's an album still being discovered

Notes: Armed with gold plated quarter-inch TRS jacks and built-in Bluetooth, Black Lion's PBR TRS BT is a future-proof patch bay built for the next technological frontier.

Black Lion's TRS BT model from their PBR range is a 46-point patch back with 94 audiophile-grade 6.35mm gold-plated TRS connectors. TRS BT features to operating modes (normal and half-normal) which can easily be toggled using a switch situated on the ruggedly anodised front panel.

For patching in modern devices at lightning speed and with zero-cabling, the TRS BT also features built-in Bluetooth connectivity. In true Black Lion fashion, every BLA-installed Bluetooth module is modded to support full lossless audio for listening and sampling at optimum resolution.

Specifications

Number of Points: 46
Front Connectors: 23x TRS Jack
Rear Connectors: 23x TRS Jack, 2x TRS Jack (BT out), USB-C
Dimensions: 534 x 102 x 51mm, 1.4kg

Notes: An absolute essential for any studio juggling outboard, effects processors, consoles or multiple synths, Black Lion's PBR TRS is an organised audio engineer's best friend.

From Black Lion's PBR range of patchbays, the bestselling PBR TRS runs 96 audiophile-grade gold-plated TRS connectors with normal/half-normal switches for each stereo set.

PBR TRS is built to be just at home on the road as in the studio, and features an incredibly hard-wearing black-anodised face plate, armed with white labelling tags for each channel for users to mark their own inputs.

Specifications

Number of Points 48
Front Connectors 48x 1/4" TRS
Rear Connectors 48x 1/4" TRS
Dimensions 534 x 102 x 51mm, 1.4kg (boxed)

Notes: MIX KM (like Feedback's PRE KM channel strip) is based on a famous late seventies small mixer used by many electronic music bands.

Tech specs:

- 35HP front panel
- 35mm depth behind front panel including the power connector
- 6 mono input jacks ( 1 per channel)
- Pot controls for channels : Gain, Hi, Low, Aux1 send, Aux2 send, Pan, Volume
- 6 mute switches (1 per channel)
- Pot controls for master : Master Level, Headphone Level, Aux1 Return, Aux2 Return
- 2 x mono aux send jacks
- 4 mono input jacks for two stereo Aux returns
- 2 jacks for master left and right out
- one 3.5mm stereo jack for headphone out
- boxed 10 pin euro power (+12V / -12V)

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Module A-121s is a dual multimode filter which can be used for stereo applications as well as for parallel or serial organized dual mono filters. The core is a 12dB multimode filter identical to the modules A-121-2 and A-121-3. The selection of the filter type is continuously from lowpass via notch and highpass to bandpass. We attached great importance to the usability of the manual controls and CV inputs for both stereo and dual mono applications. For the filter parameters frequency (F), resonance (Q) and type (T) common controls and CV inputs as well as single controls and CV inputs are available. For the filter frequency in addition a manual control and CV input for the filter spread (frequency difference or delta F) is available.

Controls:
F: master frequency control for both filters (large knob)
Type 1 / Type 2: filter type panning/morphing L-N-H-B
Link to 1: Toggle switch so that Type 1 also controls type of filter 2 (i.e. simultaneous filter type control for both filters)
SFM1 / SFM2: Single Frequency Modulation controls (polarizers), connected to the corresponding sockets SFM1/SFM2 (socket SFM1 is normalled to a fixed positive voltage, SFM2 is normalled to SFM1, that way the controls SFM1/SFM2 work as frequency controls for each filter provided that no modulation signals are patched to the SFM1/SFM2 sockets)
CFM: common frequency control, controls two VC-polarizers which process the signals connected to the two sockets CFM1/CFM2, CFM2 is normalled to CFM1, that way also the same modulation signal (e.g. an envelope generator) can be used for both filters and the level controlled simultaneously by the CFM control
Delta F: controls the difference between the frequencies of the two filters manually (frequency "spread"), at centre position the frequencies are the same
Delta FM: controls the level of the Delta FM signal (socket), which allows to control the spread between the frequencies also by an external control voltage (e.g. by an LFO or ADSR)
Q: controls the resonance of both filters simultaneously
Level 1 / Level 2: attenuators for the two audio inputs
QM/TM1, QM/TM2: attenuators for the modulation inputs QM/TM1 and QM/TM2

Sockets:
In1 / In2: audio inputs (In2 is normalled to In1)
Out1 / Out2: audio outputs
F: common frequency control input for both filters (~ 1V/oct)
Delta FM: Control voltage for frequency spread, processed by the polarizer Delta FM
SFM1 / SFM2: single frequency modulation inputs, processed by the polarizers SFM1 and SFM2, SFM1 is normalled to a fixed positive voltage, SFM2 is normalled to SFM1#
CFM1 / CFM2: common frequency modulation inputs, processed by the two voltage controlled polarizers controlled by CFM knob, CFM2 is normalled to CFM1
QM/TM1, QM/TM2: the addressing of these sockets/attenuators is defined by internal jumpers. QM means Q modulation (i.e. resonance modulation), TM means filter type modulation (QM1 = resonance modulation filter 1, QM2 = resonance modulation filter 2, TM1 = filter type modulation filter 1, TM2 = filter type modulation filter 2), socket QM/TM1 is normalled to a fixed positive voltage, QM/TM2 is normalled to QM/TM1
A 45 degrees triangle next to a socket means that the switching contact of the socket is normalled to a fixed positive voltage (SFM1, QM/TM1).
A vertical triangle indicates the normalling of two sockets (In1>In2, SFM1>SFM2, CFM1>CFM2, QM/TM1>QM/TM2).

If the filters do not behave as expected please pay attention to these peculiarities:

For the controls SFM1, SFM2, CFM, Delta F and Delta FM the centre position is the neutral position as these are polarizers. If the filter behaves unexpected these controls should be set to centre positions for the time being.

For the controls F, Q, Level 1, Level 2, QM/TM1 und QM/TM2 the fully CCW position is the neutral position as these are standard attenuators. If the filter behaves unexpected at least the controls QM/TM1 and QM/TM2 should be set to fully CCW. Via the normalling of the sockets QM/TM1 and QM/TM2 and the associated controls the filter parameters adjusted by the major controls (e.g. Type 1, Type 2 or Q) may be overwritten.

By means of small circles at the bottom right side of the front panel the user can mark the function of the QM/TM inputs. These assignments are possible:
QM/TM1 controls QM1, QM/TM2 controls QM2, the filter types are not controlled by external CVs
QM/TM1 controls TM1, QM/TM2 controls TM2, the resonances are not controlled by external CVs
QM/TM1 controls QM1 and QM2 simultaneously, QM/TM2 controls TM1 and TM2 simultaneously

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


*** New features in version 2.0 ***

The new features expand its capabilities meaning it's easier to use whilst making it a more flexible music production tool.

Resampling

Patterns and tracks can be resampled by internally recording the audio output into a new sample. Real-time resampling of your keyboard playing is also possible.

Chopping

Two new voice modes called 'Drum' and 'Chop' auto-slice samples easily with the newly developed Downbeat Divider*. Sliced sections of a sample are then spread across the keyboard making finger drumming possible.

Remix Effect

A beat repeater effect 'R.MIX', added to the master effect options, makes glitchy real-time performances possible.

The new features are designed to work well with each other so you can easily create drum tracks with auto-slicing and record lively performances that are not constrained by the grid of the internal step sequencer.You can also resample samples and tracks for infinite effects processing.

A quirky take on sampling from this 12-bit groovebox inspired by classic 12-bit samplers like the Akai MPC60. Gritty, distinctive sound and some nice sequencing options.

Supplier's Notes:
Retro sampling engine with 12bit Sampler mode

The LIVEN Lofi-12 has a 16bit - 12kHz/24kHz sampling engine with the 12bit Sampler mode that will turn any sound into a pleasing lo-fi sound.

Like the many legendary samplers that were released in the late 80s, this is a genuine low-bit and low sampling frequency sound that cannot be obtained authentically with bit crusher effects and other modern sound degrading tools.

Up to 4 seconds mono sampling per sample slot (2 seconds mono sampling at the 24kHz mode). Start and end point trimming, pitch adjustment, reverse playback, sustain loop, filtering and LFO modulation are all possible.

Easily play samples chromatically across the keyboard

Sounds sampled by the LIVEN Lofi-12 are automatically assigned to the keyboard and can be played easily at different pitches.

The well-known vintage sampler technique of sampling a 33 RPM vinyl at 45 RPM then slowing it down created the gritty, lo-fi sound that is often heard in '90s hip-hop.
The LIVEN Lofi-12 makes it easy to recreate that sound!

80 carefully selected lo-fi preset sounds are included.

Powerful 4-track sequencer with parameter and sound locking
The LIVEN Lofi-12 is equipped with the powerful 4-track step sequencer that has earned the LIVEN XFM a solid reputation.

You can easily create a 4-part song by selecting a sampled sound for each track, and with the Sound Lock function, you can easily switch sampled sounds for each phrase or sequencer step, allowing you to use an almost infinite combination of sounds within a single song.

Sequence up to 64 steps per pattern.

Save up to 64 patterns.

Sub-divide the tempo down to 32nd notes.

Program notes step by step or record them in real time. Additionally, you can also input notes to specific steps while the sequencer is playing to add variation.

The Parameter Lock function allows you to record knob changes into your patterns. This can be recorded live, or programmed in step by step.

The Sound Lock function allows you to record selected sound changes into your patterns. You can use an almost infinite combination of sounds within a single song.

Laid-back knob for creating drunk beats
The Laid-back knob on the LIVEN Lofi-12 allows you to delay the start of the selected sampled sound.

For example, you can slightly delay the snare drum sound in your drum pattern, or use the Parameter Lock function to shift the sound timing later for each step individually.

11 types of Effects each track and 8 types of Master Effect
The LIVEN Lofi-12 features independent effects on all four tracks.
You can select from 11 types of effects from the LIVEN series, and the effect parameters can be automated in steps using the Parameter Lock function.

In addition, 6 types of high-quality Reverbs + Cassette Tape Simulator and Vinyl Simulator are included as the master effect.
The send amount can be adjusted for each track for mixing.

Specifications

Sampler
16bit - 12kHz or 24kHz (switchable) linear PCM sampling (mono)
12bit Sampler mode
Sampling up to 4 seconds per sample (12kHz) or 2 seconds per sample (24kHz)
Auto start sampling function with the input level (input level can be set)
Start/end point, attack, release, pitch, and level adjustment
Reverse playback
Sustain loop settings
Maximum polyphony: 10 voices
128 sample memory slots (16 x 8 banks)
Import and export of a slot or banks of samples (via MIDI)
*Import of audio files from PC/Mac is not supported.


10-note polyphonic mode
Mono mode with adjustable glide time
Legato mode with adjustable glide time
Arpeggiator modes (Up, Down, UpDown, DownUp, Up&Down, Down&Up, Up+1, Up+2, Down-1, Down-2, Random, Play Order)

Filter
Low Pass
High Pass
Band Pass
Each track has its own filter and envelope

LFO
Each track has one LFO which can affect both pitch and filter cutoff with separate adjustable levels
Adjustable LFO Shapes
Adjustable start time delay for each LFO

Sweep
Sweep with adjustable speed, range, and curve

Effects

Track effects

One effect per track
Chorus
Flanger
Tremolo
Delay
Distortion
Bit Crusher
Low Pass Filter
High Pass Filter
Isolator
Tilt EQ
Compressor

Master effects

Reverb send amount can be set independently for each track
Hall Reverb
Room Reverb
Arena Reverb
Plate Reverb
Tunnel Reverb
Infinity Reverb
Cassette Tape Simulator
Vinyl Simulator

Sequencer

4 tracks
Up to 64 steps per pattern
64 patterns
Step length can be set from 1/1 to 1/32
Real-time recording
Directly enter notes for each step when playback is on or off
Enter longer notes (Tied notes)
Metronome and pre-count function
Step copy and paste function
Track copy and paste function
Transpose function
Swing function
Pattern BPM / Global BPM can be set
Pattern chain function

Notes: Quantus Trajecta is a quad envelope designed with polyphony in mind. Quantus Trajecta's envelope structure takes the functionality from Noise Engineering's beloved Loquelic and Cursus Iteritas Percido modules, and adds even more control and mode options like Tremolo and ADSR.

Each parameter is CV controllable, and each control universally adjusts all four envelopes for easy polyphonic tracking. Quantus Trajecta is performable, musical, and most importantly, fun.

Notes: Jam Jam is a versatile and fun trigger-and-gate processor with four individually adjustable and CV-able channels. The three modes pack incredible functionality into the tiny 6hp package.

Random mode turns the module into four individually adjustable probability processors, great for adding variety to a patch.

In Clock Phase mode, the module adjusts incoming clock phase based on clock period. Use this to adjust sequencer timing or to create sequences that drift out of sync and then back in with CV.

Use Gate Delay mode as a simple trigger delay to help keep things in sync in your patch or for creative patching: dial in shifts in the timing of events from sub-millisecond adjustments to huge delays of over 15 seconds.

Jam Jam is a musical and fun utility sure to find a use in every patch.

Notes: Moog Music SR Series Cases feature generous padding around a semi-rigid A.B.S. shell, a rugged Ballistic Cordura outer that resists tears and abrasions, and laminated water-resistant zippers to offer on-the-go protection and safe storage for your instrument.

Multiple strap and handle configurations keep your commute comfortable, and multifunction pockets ensure you're organized on arrival.
Designed in conjunction with Subsequent 25
Rugged and road-ready semi-rigid A.B.S shell
Tear-resistant Ballistic Cordura outer
Water-resistant laminate zippers
Also fits Sub Phatty!

Notes: An ART wavetable dual oscillator mono voice source that can be used to build polyphonic patches and multi voice patches. It generates its harmonically rich sound using two 80s vintage D/A converters to feed your filters and effect processors. VORTEX comes loaded with dozens of wavetables, plus additional user wavetables can be loaded from the front panel SD card. A detune knob controls the second VCO and adds effects from deep phasing to a sub octave. The position knob and CV input selects waves in the tables and vibrato from LFOs to create FM. Like other ART sound generators a dedicated Gate output manages the voice envelope or any modulation synced to that voice. VORTEX is a great companion to the analog ATX1 and a must for digital synthesist enthusiasts.

Size: 8HP - Depth: 40mm / 1.5"
Power: +12V 80mA / -12V 25mA