100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Home  All Genres  

Search dance music

Options
Items 951 to 1,000 of 1,031 on page 20 of 21
«  1  2  3  ...  19  20  21  »
FORTHCOMING
ADDAC System ADDAC501 Complex Random Module (red faceplate) ADDAC System ADDAC501 Complex Random Module (red faceplate)
Cat: 776328
 
random CV generator module
Notes: The ADDAC501 does random CV generation and outputs it through four independent channels. You can control the desired range of voltages and time frequency at which new values are generated.

It can also be triggered by an external CV source and the output voltages can be either free or quantized (if you prefer to have a standard C Major scale).

Finally you can choose between pure randomness or a brownian distribution, for both the voltage and time intervals.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 5 cm

Control Voltage I/O:
. CV inputs: 0 - 10v
. CV output: 0 - 5v (0 - 10v through jumper)
. Gate in threshold: 2.5v

Electrical:
. Compatible with +-12v and +-15v power supplies
. Max current: 150mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$338.38
coming soon $325.53
FORTHCOMING
ADDAC System ADDAC501B Complex Random Expansion Module (red faceplate) ADDAC System ADDAC501B Complex Random Expansion Module (red faceplate)
Notes: The ADDAC501B expansion is connected directly to the ADDAC501 Complex Random. It extends functionality by adding gate outputs to the random generators.

If ADDAC501 generates a new random above the average between Minimum and Maximum, then the respective gate on ADDAC501B is triggered.

There are three pairs of gates, corresponding to the respective outputs on ADDAC501. Each gate pair has both positive and inverted outputs.

This expansion module also offers a dedicated knob for gliding effects. With it you can have a voltage ramp between two consecutive random numbers- randomized "legato" expressiveness.

Mechanical:
. Format: Eurorack
. Width: 4 HP
. Depth: 5 cm

Control Voltage I/O:
. Gate outputs: 0 - 5v

Electrical:
. Connects directly to ADDAC501
. Max current: 20mA
Read more
MRP:$134.57
coming soon $130.64
FORTHCOMING
EMW MIDI Clock to Pulse Module (black faceplate)
Cat: 775632
 
MIDI clock to pulse module
Notes: The EMW MIDI CLOCK TO PULSE module extracts the MIDI Clock signal and produces 5V. pulses with adjustable width that allows the synchronization with any eurorack module. It have a PLAN and Pulse Division adjustment for easy time base generation in sync with the MIDI Clock. A manual sync button pauses the pulse counting while pressed, helping to manually synchronize the MIDI Clock with other time bases. A 8x2 display facilitates the module operation.

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [28mA] / -12V [0mA]
Weight: 149g
Depth: 50mm
Read more
MRP:$207.73 SAVE 19%
coming soon $168.76
FORTHCOMING
EMW Clock Counter/Separator Module (black faceplate)
Cat: 775642
 
clock counter & seperator module
Notes: The EMW Clock Counter / Separator module counts a certain number of pulses coming into it's CLK IN jack and distribute them to 4 different outputs. With the "COUNTER" knob set to "4", the first 4 incoming pulses will be routed to OUT 1. The next 4 pulses will be routed to OUT 2, the next 4 to OUT 3, and the last 4 will go to OUT4. Any clock source can be distributed to several modules in sequence. You can reduce the separation from 4 to 3, 2 or 1 channel by just patching a cable from one output to a previous input.

18 mA +12V
10 mA -12V
50 mm deep
Read more
MRP:$121.50 SAVE 20%
coming soon $96.90
FORTHCOMING
EMW Pulse Divider Module (black faceplate)
Cat: 775643
 
pu;se divider module
Notes: The EMW Pulse Divider module divides the frequency of the incoming pulses (clock) by 2, 4, 8, 16, 32 and 64. Different clock divisions can be useful for creating rhythmic effects by triggering different modules in multiples of a reference time.

Eurorack (3U) form factor - 6 HP width
Power consumption: +12V [9mA] / -12V [OmA]
Connectors: 3.5mm
Weight: 62g
Depth: 50mm
Read more
MRP:$96.68 SAVE 20%
coming soon $77.31
FORTHCOMING
EMW CV Folder 3X Module (black faceplate)
Cat: 775627
 
CV folder module
Notes: With the EMW CV FOLDER module you can create several variations on the incoming waveform shape. It's an ideal tool to use for complex modulation patterns in conjunction with LFOs. Two LEDs on the front panel indicate the positive/negative proportion of the output waveform and a level control adapts the incoming signal to the best operational level.

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [15mA] / -12V [7mA]
Weight: 86g
Depth: 50mm
Read more
MRP:$109.75 SAVE 19%
coming soon $89.27
FORTHCOMING
EMW VC Slew Limiter Module (black faceplate)
Notes: The VC SLEW LIMITER module limits the changes on the incoming signal and create a slow varying output voltage. These output voltage can have it’s attack time, decay time and shape altered by the the front panel knobs or have it’s attack and decay times controlled by external voltages. A Fast/Slow switch allows the selection of the time variances that the internal circuit can produce. This module is a very good tool for creating and compose modulation routines.

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [20mA] / -12V [17mA]
Weight: 100g
Depth: 50mm
Read more
MRP:$124.12 SAVE 23%
coming soon $95.81
FORTHCOMING
EMW Logic 202 Logic Functions Module (black faceplate)
Notes: The Logic 202 module has 3 main sections with 5 distinct logic functions. It’s a very useful unit that allows you to create alternative activation logic sequences.
The "AND" function output only goes high when both A and B inputs are high. The "OR" function output goes high when either A or B inputs are high. The FLIP-FLOP toggles between two states (HIGH/LOW) when a pulse is detected on its input. If it’s low (0V), a pulse turns it to high (+5V) and it stays in this state until the next pulse comes in. Additionally we have included a 4-stage pulse divider with reset.

Eurorack (3U) form factor - 16 HP width
Power consumption: +12V [70mA] / -12V [0mA]
Weight: 171g
Depth: 50mm
Read more
MRP:$150.25 SAVE 20%
coming soon $120.85
FORTHCOMING
EMW Random Pulse 4X Module (black faceplate)
Notes: EMW has released a new module, great for creating random rhythms and triggering events. The Random Pulse 4X outputs random gates based on the Pulse Input. It also has a dedicated Noise output for utilitarian use. The four random pulse outputs are vaguely related to the pulse input, and changing the speed of the pulse input can drastically change the character of the outputs.
Read more
MRP:$108.44 SAVE 19%
coming soon $88.19
FORTHCOMING
EMW Pseudo Stereo Module (black faceplate)
Cat: 775406
 
psuedo stereo module
Notes: Pseudo Stereo creates a stereo image from any mono audio waveform. It dynamically separates some frequencies from the incoming wave spectrum and generates a variation of the original waveform on the second output channel. This pseudo-stereo effect adds depth to the audio signal.

Eurorack (3U) form factor - 6 HP width
Power consumption: +12V [10mA] / -12V [4mA]
Weight: 58g
Depth: 50mm
Read more
MRP:$103.21 SAVE 21%
coming soon $81.66
FORTHCOMING
EMW 6 X Gate To Trigger Converter Module (black faceplate)
Notes: The EMW Gate to Trigger converter is a useful tool for transforming larger pulses (like a keyboard gate) into a narrow trigger pulses.These narrow trigger pulses can be used to initiate ADSRs, Sequencers, Audio Switches, etc.This module has 6 independent converters with individual LED indicators for visual feedback.

Read more
MRP:$108.44 SAVE 19%
coming soon $88.19
FORTHCOMING
EMW Dual Pulse Delay Module (black faceplate)
Notes: The EMW Dual Pulse Delay module is a great module for adding interesting variations to your patches. This module features two independent pulse delays with separate input and output jacks as well as delay time and pulse-width control.

Eurorack (3U) form factor - 10 HP width
Power consumption: +12V [24mA] / -12V [8mA]
Weight: 114g
Depth: 50mm
Read more
MRP:$122.81 SAVE 19%
coming soon $99.07
FORTHCOMING
EMW Ring Modulator Module (black faceplate)
Cat: 775571
 
ring modulator module
Notes: The EMW RING MODULATOR module is a classic analog synthesizer module that is used to produce very interesting effects on waveforms. Two incoming signals (referred to as Modulation and Carrier) are multiplied and the output is the sum and difference of the two frequencies. It can be used in many ways to generate robotic effects on a voice signal or most usually a metallic sound effect on the oscillators waves. The EMW Ring Modulator has a very accurate circuit and can produce very clean ring modulator sounds.
Read more
MRP:$97.99 SAVE 20%
coming soon $78.39
FORTHCOMING
EMW Sequential Voltage 16 Module (black faceplate)
Notes: Eurorack (3U) form factor 18 HP width

Connectors: 3.5mm

Depth: 55mm
Read more
MRP:$222.11 SAVE 19%
coming soon $179.64
FORTHCOMING
EMW MIDI Step Sequencer Module (black faceplate)
Notes: The EMW MIDI STEP SEQUENCER module is a very straight forward 16-step MIDI sequencer that allows you to create complete pattern-based sequences very quickly. It has features such as octave control, reset, and hold inputs as well as a "Beat 1" trigger input that allows it to interface with other modules in many different ways. A pulse signal from a LFO patched into the to the "+1 OCT" input adds very interesting variations into the sequence.

Read more
MRP:$218.19 SAVE 19%
coming soon $176.38
FORTHCOMING
EMW Voltage Comparators Module (black faceplate)
Cat: 775728
 
voltage comparators module
Notes: The Voltage Comparators module is used to trigger other modules as a function of a certain incoming voltage level. This module has four units, two of them producing a stable level output and the other two producing short trigger pulses. The outputs normally remain in zero volts (low) until the incoming voltage source reaches the adjusted level (0-10V.). When it happens the correspondent output goes high. The LEVEL OUT remain high while the incoming voltage keeps a level equal or greater than the adjusted voltage, while the TRIG. OUT produce a single trigger pulse under the same condition.

Eurorack (3U) form factor - 10 HP width
Power consumption: +12V [42mA] / -12V [15mA]
Weight: 114g
Depth: 50mm
Read more
MRP:$126.73 SAVE 19%
coming soon $102.34
FORTHCOMING
EMW Headphone Amplifier Module (black faceplate)
Cat: 775735
 
headphone amplifier module
Notes: Mono/stereo headphone amp module with different level settings

Eurorack (3U) form factor

Connectors: 3.5mm

Depth: 50mm
Read more
MRP:$97.99 SAVE 20%
coming soon $78.39
FORTHCOMING
EMW Pulse Generator Module (black faceplate)
Cat: 775737
 
pulse generator module
Notes: The EMW Pulse Generator creates pulse signals based on the incoming signal. The module generates a pulse signal whenever the voltage of the incoming signal goes above the threshold set by the Trigger Level knob. You can also use the Pulse Width knob to adjust the width of the generated pulse signal.
Read more
MRP:$101.91 SAVE 21%
coming soon $80.57
FORTHCOMING
EMW Dual DC Shifter Module (black faceplate)
Notes: The EMW Dual DC Shifter is a simple utility module that lets you add a positive or negative offset (+/- Xv) to an incoming signal. This is useful for turning bipolar signals (+/- 5v) into a unipolar range (or vice-versa) and transposing CV sequences.

Eurorack (3U) form factor - 6 HP width
Power consumption: +12V [15mA] / -12V [15mA]
Weight: 65g
Depth: 50mm
Read more
MRP:$88.84 SAVE 20%
coming soon $70.77
FORTHCOMING
EMW Linear Attenuators Module (black faceplate)
Cat: 775772
 
attentuators module
Notes: The EMW Linear Attenuators module is great for controlling the level of audio signals and control voltages. Signals patches into IN1 or IN2 will suffer an attenuation that can be adjusted from zero to infinity. An extra 4-patch connections is also present to expand the module's usability.

Eurorack (3U) form factor - 6 HP width
Dual adjustable DC-Audio attenuation controllers
Attenuation range: zero to infinity
Additional 4 patch connections
Power consumption: +12V [0mA] / -12V [0mA]
Connectors: 3.5mm
Weight: 46g
Depth: 22mm
Read more
MRP:$57.49 SAVE 19%
coming soon $46.81
FORTHCOMING
EMW Button Interface 1 Module (black faceplate)
Notes: The EMW Button Interface 1 is an auxiliary module that has 3 main functions: It can be used to momentarily switch an incoming signal on/off, generate a manual trigger or gate signal (5v), or to produce an adjustable 0-10V signal control voltage signal. It's a great module for manually controlling your modular system.
Read more
MRP:$64.02 SAVE 17%
coming soon $53.34
FORTHCOMING
EMW VC Signal Switcher Module (black faceplate)
Cat: 775781
 
signal switcher module
Notes: Eurorack (3U) form factor - 8 HP width

Connectors: 3.5mm

Depth: 55mm
Read more
MRP:$109.75 SAVE 19%
coming soon $89.27
FORTHCOMING
EMW Switch Interface 2 Module (black faceplate)
Cat: 775787
 
triple switch controller module
Notes: The EMW Switch Interface 2 is an auxiliary module that has three stationary switches that can be used to connect an input-output jack pair or to route one input signal to one jack (left) or another jack (right). Its great for manually controlling signals in your patches.

Eurorack (3U) form factor - 8 HP width

Connectors: 3.5mm

Depth: 22mm
Read more
MRP:$64.02 SAVE 17%
coming soon $53.34
FORTHCOMING
EMW CV Monitor Module (black faceplate)
Cat: 775789
 
CV monitor module
Notes: The EMW CV Monitor is a simple and useful module that can used to measure the voltage of an incoming signal. The module displays voltages ranging from +/- 5 Volts using leds for every .5 increment.

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [20mA] / -12V [4mA]
Weight: 59g
Depth: 50mm
Read more
MRP:$109.75 SAVE 19%
coming soon $89.27
FORTHCOMING
EMW Spectral Viewer Module (black faceplate)
Cat: 775790
 
spectral viewer module
Notes: The EMW SPECTRAL VIEWER module splits the audio frequency band and translates the individual bands into intensity color levels in a way that red represents low frequencies, green represents the mid frequencies and blue the high frequencies. A full audio material fed into the module will be translated into a dynamically multi-color visualization of the audio spectrum.

The EMW SPECTRAL VIEWER will add an extra dimension, with sound-activated dynamic colors to your modular.

Eurorack (3U) form factor - 12HP width

Connectors: 3.5mm

Depth: 50mm
Read more
MRP:$176.38 SAVE 19%
coming soon $142.63
FORTHCOMING
ADDAC System ADDAC604 Dual Filter Module (black faceplate) ADDAC System ADDAC604 Dual Filter Module (black faceplate)
Cat: 776353
 
dual filter module
Notes: While developing the ADDAC105 4 Voice Cluster module, a new multimode filter to place after the summing mix stage- and the results were so postitive that it was released as a dedicated filter.

To make it more interesting, the circuitry was duplicated, to be able to use it in a stereo signal path.

To make it more versatile, a switch was added to set the working mode from Stereo to Dual Mono where both filters can be used independently.

In Stereo Mode the Left Cutoff is used to control the Right Cutoff.
In this case the Right Cutoff Knob and CV Input are simply bypassed and will have no impact on the Right Channel operation.
This allows immediate sync of both filter frequencies when the Stereo position is engaged.
Optionally there's a jumper in it's back that, when placed, connects the Right Controls back to the Right CV control allowing the possibility to control the offset of the Right Channel Cutoff.

Resonance is independent on both Modes and still has to be set manually to match both channels.

Both the Audio and CV inputs are normalled from the Left into the Right channels.
As standard plugging any input to the Right channels removes this connection.

Tech Specs:
6HP
4 cm deep
70mA +12V
70mA -12V
Read more
MRP:$202.51
coming soon $195.96
FORTHCOMING
ADDAC System ADDAC611 Gotharman's VC Tube Filter Module (black faceplate) ADDAC System ADDAC611 Gotharman's VC Tube Filter Module (black faceplate)
Notes: This module was developed upon the Tubaz Filter which was released in 2014 by Gotharman but is currently no longer in production. We loved the original module so much that we officially licensed it's circuit and expanded it to feature several new functionalities.

Here's a paragraph from Gotharman regarding the original design:
"I designed it with the purpose of adding crunch, edge and distortion to my eurorack system. It is not an ideal bandpass filter, that cuts off all frequencies above and below the center frequency.
Because of its high drive, there are, in most cases, some bleedthrough of the harmonics, that should have been cut off. You might consider calling it a "Band Add" filter. The main purpose of it, was to add edge, not to be a perfect bandpass filter."

While everything he mentions is still true we believe he was being modest, It's a dirty, gritty, growling and whining monster which promises you some of the most peculiar filter sounds you'll ever hear.
However do not classify it as a "weird" distortion unit just yet because besides this hairy character it can be easily tamed (using lower volume levels) and then, with some care and intention from the user, it will transforrm itself showing it's feline purrrrr and cuddle sweet and caring, or like any good mut, showing up at night all happy, wet and dirty from a full dog's day and will lay down at your feet while wiggling it's tail howling as yawning just happy to be back home.

As such, standard volume principles do not quite apply to these units, the Audio Levels will go up to x2 amplification, Drive will go up to x11 and master outs go up to x2. The combination of these will cover all diferent qualities it can present. Overall sound can be distorted pre-Tube (raising input levels), in Tube (raising drive) or post-Tube (raising Out levels).
Higher Inputs and Drive will always be gritty, lower Inputs and Drive volumes together with higher Output levels will make the overall behaviour more mellow and closer to what a typical filter would behave like.

No standard expectations should be considered when acquiring these units, all of the tubes were built in the 70's and were bought from various sources, we always kept the premise that no tube was a bad tube (unless not really workinng) so due to each specific characteristics no module will sound exactly the same, making each unit particularly unique. This uniqueness will be particularly evident on their resonance/self-oscilating timbre as well as in their own microphonic qualities.

Regarding power and current draw, the module is designed using a low power tube, so it won't starve your eurorack power supply.

Tech Specs:
12HP
3.5cm deep
90mA +12V
60mA -12V
Read more
MRP:$359.29
coming soon $347.31
FORTHCOMING
Schottkey Modular Ratchet Module
Cat: 778087
 
ratchet module
Notes: The RATCHET is a 12-channel, up to 64 steps per channel, drum, event and/or rhythm sequencer that features up to 16 'ratcheted' divisions per step. It's quite powerful with per-step variable gate lengths or ties, swing and random with forward, backward and pong-pong play modes. Save patterns on a provided Micro SD card.

Other features include: Per Drum pattern lengths, Per Drum Random Amounts, Drum muting, Random Muting, copy/paste, and so much more!

Ships with Micro SD Card.

20HP wide - 25mm deep
Read more
MRP:$376.27 SAVE 19%
coming soon $304.85
FORTHCOMING
ADDAC System ADDAC300 Power Starvation Module (75mA version) (red faceplate)
Notes: Power starvation is the first hack that any "DIY'er" learns. It's also one of the hacks that can generate some of the most interesting sonic effects in circuit bending, and ADDAC have applied this principle to the modular world. Plug any module of your choice through it and independently tune it's i power.

This will have most interesting effects in analog modules: filters, delays, mixers. They can either go silent or start screaming at your ears, going berserk with the lack of current to behaving normally.

Two IDC connectors on the back allow to independently plug 2 modules of your choice.

Bypass switches for easy operation.

The trimmers allow for setting a minimum voltage plateau. Most modules will shut down from 3 to 10v. These trimmers allow to set them at the right sweet spot and enjoy the full range of the pot for the power starving.

This module uses special potentiometers which are way more expensive than regular ones.

Specs:
. Passive Module
. Width: 4 HP
. Depth: 4 cm
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$100.60
coming soon $97.97
FORTHCOMING
EMW Dual Glide Processor Module (black faceplate)
Cat: 775740
 
glide processor module
Notes: The EMW Dual Glide Processor module can create glide or portamento effects on control voltages. It's great for creating portamento effects on CV sequences or changing the decay characteristic of a control voltage or another low frequency waveform.
Read more
MRP:$77.08 SAVE 21%
coming soon $60.97
FORTHCOMING
EMW Dual Offset Processor Module (black faceplate)
Notes: The EMW Dual Glide Processor module can create glide or portamento effects on control voltages. It’s great for creating portamento effects on CV sequences or changing the decay characteristic of a control voltage or another low frequency waveform.

Eurorack (3U) form factor - 10 HP width
Power consumption: +12V [41mA] / -12V [40mA]
Weight: 105g
Depth: 50mm
Read more
MRP:$108.44 SAVE 19%
coming soon $88.19
FORTHCOMING
EMW Dual Voltage Source Module (black faceplate)
Cat: 775746
 
dual voltage source module
Notes: The EMW Dual Voltage Source is an auxiliary module that can be used in many situations. Used together with the EMW DC Mixer, it can add offsets to a waveform, modifying it's timbre. It can also be used to manually control other modules such as VCAs, VCFs, VCOs, etc. An extra 4-patch connections is also present to expand the module's usability.


Read more
MRP:$79.70 SAVE 21%
coming soon $63.14
FORTHCOMING
MST Expressor Module (fully assembled)
MST
Cat: 778043
 
expressor module
Notes: The MST Expressor allows you to use expression pedals with your modular, taking a "hands-off" approach to expand your control and creativity. It has two identical powered expression pedal processing units in one handy module, allowing you to do things such as:

Control volume with your foot
Attenuate CV or audio if no expression pedal is plugged in
Add positive or negative voltage with the flick of an ankle:
Sweep a filter cutoff
Transpose CV
Pitch bend
Direct audio volume control
Attenuate and expand external CV
LFO rate adjustment
Modulation amount control
And more.

Specifications:

Current draw: 28mA on +12V; 28mA on -12V
Width: 8HP
Module depth: 24mm
Read more
MRP:$156.78 SAVE 19%
coming soon $127.37
FORTHCOMING
MST MIDI to CV Expander MST MIDI to CV Expander
MST MIDI to CV Expander (synth module)
MST
Cat: 778050
 
MIDI to CV expander module
Notes: The MST MIDI to CV Expander module is a tiny but extremely powerful expansion module for the MST MIDI to CV Converter. The Expander includes an arpeggiator and allows you to have additional CV, gate, velocity, modulation and aftertouch outputs on a separate MIDI channel. You can also set it to the same MIDI channel as the Converter and use one of the three note priority selections, which will allow you to do duophony/pseudo-polyphony. You can daisy-chain Expanders together to add even more channels.

The Expander really shines when it is used with a DAW. Multiple Expanders can be set to different MIDI channels in any sequencer (like Ableton for example), making live performance with your Eurorack simple.

The Expander connects to the MIDI to CV Converter using an I2C cable (included).

Specifications:
Current draw:
+12V: 55mA
-12V: 15mA
Module Depth: 48mm
Width: 2HP
Read more
MRP:$188.14 SAVE 19%
coming soon $152.42
FORTHCOMING
EMW 8-Step Trigger Sequencer Module (black faceplate) EMW 8-Step Trigger Sequencer Module (black faceplate) EMW 8-Step Trigger Sequencer Module (black faceplate) EMW 8-Step Trigger Sequencer Module (black faceplate)
Notes: The EMW 8-Step Trigger Sequencer combines many different features into a wellsized 8hp module. This module let’s you program 8 different sequences that can be used to trigger drum modules, envelopes or function generators. The module includes clock, reset, and hold CV inputs as well as a "Beat-1" trigger output that sends out a trigger whenever the sequencer goes through Step #1.

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [38mA] / -12V [0mA]
Weight: 119g
Depth: 50mm
Read more
MRP:$124.12 SAVE 22%
coming soon $96.90
FORTHCOMING
ADDAC System ADDAC810 Phono Pre-Amp Module (red faceplate) ADDAC System ADDAC810 Phono Pre-Amp Module (red faceplate)
Notes: The Phono Pre Amplifier module- connect your turntable to it and bring it's sound straight into any of your patches.

Specs:
. Width: 4 HP
. Depth: 4.5 cm
. Current: 40mA
Read more
MRP:$134.57
coming soon $130.64
FORTHCOMING
ADDAC System ADDAC812VU Module (black faceplate)
Cat: 776439
 
metering module
Notes: Stereo/dual VU metering module with buffered thru outputs for each channel.

An additional switch turns the beautiful lamps behind the VU meters off, in case your rack is running low on power!

A couple trimmers on the back of the module allows the user to define the VU range of each channel independently.

Mechanical:
. Format: Eurorack
. Width: 8 HP
. Depth: 3.5 cm

Electrical:
. Max current with lamps on: +100mA/-10mA
. Max current with lamps off: +10mA/-10mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$146.33
coming soon $141.53
FORTHCOMING
SynthRotek Verb Reverb Module (black faceplate) (fully assembled)
Notes: The Synthrotek Verb is a reverb module like no other. This PT2399 unit offers a warm tape-saturated spring reverb sound, but the added flair of subtle modulation truly makes it shine. The input gain knob drops the input amount back to give cathedral-like sounds when the mix is high. Turn the modulation knob manually for pitch bends; patch in a slow LFO or envelope CV to emulate pitch bends reminiscent of a tape echo with a broken capstan. The mix knob is a very fast-responding cross fader circuit which allows audio rate inputs for further FM-like modulation. Add a subtle amount of reverb or crank the mix past 3 o'clock to knock the reverb signal into the rails.

Current Draw:
18mA @ -12V
87mA @ +12V
0mA @ +5V
Width: 4hp
Depth: 54mm ( 2.13in )
Read more
MRP:$188.14 SAVE 19%
coming soon $152.42
FORTHCOMING
Eurorack Hardware Modules OR Dual Eurorack Combiner Module (black faceplate) (fully assembled) Eurorack Hardware Modules OR Dual Eurorack Combiner Module (black faceplate) (fully assembled)
Notes: The OR is a passive dual OR Combiner module in 2HP for Eurorack. Two channels of three inputs to one output. Matte black panel with white graphics. Perfect for adding gates or trigger signals together as each input is diode protected. Passive, no current draw.
Read more
MRP:$37.89 SAVE 17%
coming soon $31.57
FORTHCOMING
Eurorack Hardware Modules RING Dual Ring Modulator (black faceplate) (fully assembled) Eurorack Hardware Modules RING Dual Ring Modulator (black faceplate) (fully assembled)
Notes: RING is a 4HP dual passive ring modulator for Eurorack. Ring modulation is an essential 'effect' in modular synthesis. You get two independent channels of the classic two-transformer, four-germanium analog design. Matte black panel with white ink.
Read more
MRP:$87.54 SAVE 19%
coming soon $70.76
FORTHCOMING
MST VC Low Pass Filter Module (fully assembled)
MST
Cat: 778062
 
low pass filter module
Notes: The MST Low Pass Filter is a precision analog dual slope output 2 & 4 pole filter. Simultaneous -12 DB and -24 DB outputs with CV control over all parameters. Can be used as a 1V/O sine wave oscillator

Specifications:

Current draw: V+ max 23.5mA, V- max 15.5mA

Width: 6HP Depth: 3.5cm (1.75 in)

Read more
MRP:$206.43 SAVE 19%
coming soon $167.66
FORTHCOMING
EMW MIDI Thru 4 Module (black faceplate)
Notes: The EMW MIDI Thru-4 was designed to help users with multiple MIDI modules. It lets you take 4 copies of a MIDI signal that can used with any of our EMW MIDI-enabled oscillators.

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [10mA] / -12V [0mA]
Weight: 69g
Depth: 50mm
Read more
MRP:$104.52 SAVE 20%
coming soon $83.84
FORTHCOMING
EMW MIDI Mixer Module (black faceplate)
Notes: The EMW MIDI Thru-4 was designed to help users with multiple MIDI modules. It let’s you take 4 copies of a MIDI signal that can be used with any of our EMW MIDI-enabled oscillators.

Eurorack (3U) form factor - 8 HP width
Power consumption: +12V [34mA] / -12V [15mA]
Weight: 73g
Depth: 50mm
Read more
MRP:$108.44 SAVE 19%
coming soon $88.19
FORTHCOMING
MST '07 Buffered Multiple Module (fully assembled)
MST
Cat: 778019
 
buffered multiple module
Notes: The MST '07 Buffered Multiple is the original buffered mult design invented by George Mattson in 2007. It's a precision mult that is perfect for 1V/O CV sources. A signal plugged into Input 1 will be available from all 14 outputs. Break the chain by adding a second signal into input 2; signal 1 comes out 4 outputs and signal 2 is available at the remaining 10. Plug in as many as 4 inputs, each split 3 or 4 times. What you put in, you get out.

Specifications:
Current draw: V+ max 42mA, V- max 42mA
Depth: 33mm
Width: 4HP
Read more
MRP:$125.42 SAVE 19%
coming soon $101.24
FORTHCOMING
ADDAC System ADDAC22110x9 Channel CV to CC MIDI System Module (red faceplate)
Notes: The ADDAC221 is a standard midi controller that allows CV inputs, converting CV variations to MIDI Control Change Messages. This allows interaction with your favourite standalone synthesisers and softwares through simple plug-and-play midi control.

A dedicated software permits the user to store up to 9 different presets, where the CC values of each channel can be configured as wished.

This way the user can preset his favourite synths to control filters, envelopes and whatnot from CC messages coming from the module CV inputs.

Ships with 2 stereo jack to din5 midi cables.
Read more
MRP:$359.29
coming soon $347.31
FORTHCOMING
MST Stereo Output Mixer Module (fully assembled)
MST
Cat: 778059
 
stereo output module
Notes: The MST Stereo Mixer is intended for pannable stereo output, but it is also suitable for both AC & DC voltage signals (Gates, Triggers and Control Voltage).

Specifications:
Current draw: +12: 13mA, -12 9.2mA
Width: 6HP
Read more
MRP:$107.13 SAVE 20%
coming soon $86.01
FORTHCOMING
MST Unity Gain Mixer Module (fully assembled)
MST
Cat: 778060
 
gain mixer module
Notes: The MST Unity Gain Mixer adds input signals together and combines them for a summed output. For example, if you put in a 1V source and a 3V source, the output will be 4V. It's mainly used for CV, but it can also be used to combine audio signals together.

A unity gain mixer is handy in several ways:
Combining gates and triggers. Plug a few sequencer steps into the unity gain inputs, then run the output to a drum synth, VCA, envelope, etc.
Re-shaping two CV sources with a single envelope.
Combining different wave shapes or LFOs to make crazy sounds.
Controlling the CV of one source with the CV of another source. Just plug the CV out of a sequencer into and an expression pedal/touchable CV out into the unity gain inputs.

Specifications:
Current draw:
+12V: 9mA
-12V: 9mA
Module Depth: 22mm
Width: 6HP
Read more
MRP:$107.13 SAVE 20%
coming soon $86.01
FORTHCOMING
MST VC LFO Module (fully assembled)
MST
Cat: 778061
 
voltage controlled LFO module
Notes: MST Voltage Controlled Low Frequency Oscillator is another tiny, useful module packed to the gills with features. Manual and CV control over rate with 3 discrete waveform outputs. A square wave can be used to clock modules such as our Noise, Sample & Hold module. Great for creating vibrato, tremolo or other classic modulation techniques. Great for frequency modulation, especially when connected to the MST analog VCO.

Specifications:

Manual range: Approx 51 Second to Approx 102 Hz
Time with Max range, +5V CV: 1,450Hz
Time with Max range, -5V CV: 1 Hz
Time with Min range, +5V CV: 2 Hz
Time with Min range, -5V CV: 1.5 Hours
Skew range, all waveforms: 14% to 86%
Current draw: V+ max 11.75mA, V- max 12.2mA
Width: 4HP, Depth: 4.77 cm (1.88 in)
Read more
MRP:$156.78 SAVE 19%
coming soon $127.37
FORTHCOMING
ADDAC System ADDAC301 Floor Control Module (red faceplate)
Cat: 776281
 
floor control module
Notes: While ADDAC were working on the new VC Stompboxes several expression pedals were tested and it became clear that most often, while playing a modular system, your hands are busy.
It's also normal to have an expression pedal lying around somewhere, so ADDAC have brought these back, cleaned up the dust and put them to good use.
This module allows the connection of any standard expression and sustain pedal.

The expression pedal action can be fine-tuned with Range and Offset knobs.
Range defines the voltage range (-10v, +10v).
Offset transposes the range by (-5v, +5v).
Two leds, plus and minus, monitor the CV Output
Positive and inverted output jacks.
The sustain pedal action will generate a gate signal on the gate output.
One led monitors this output.
The module also features a bus board +5v Adaptor, this will be able to provide +5v to any bus board.
This feature can be removed through a jumper on the back of the module.

Specs:
. Width: 4 HP
. Depth: 4 cm
. Max current: 20mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
Read more
MRP:$78.39
coming soon $76.21
FORTHCOMING
Rat King Modular EVENT Module (fully assembled)
Cat: 778067
 
VCO/envelope/slew limiter/waveshaper/LFO/envelope follower module
Notes: VCO, envelope, slew limiter (portamento), waveshaper, LFO, envelope follower- The EVENT does it all, making it one of the most versatile analog modules available.

Controls:

ONSET: Controls the positive rate (time) of change in voltage. It has a bipolar CV input jack.
DURATION: Controls the negative rate (time) of change in voltage. It has a bipolar CV input jack.
HEIGHT: Controls the held voltage level when a continuous gate is applied.
TRACK: 1v/oct input. It is particularly useful when patching the EVENT as a VCO.
START: A simple gate/trigger/pulse input that initiates a cycle when the EVENT is patched as a voltage controlled envelope.
SIGNAL input: Can be a constant or fluctuating voltage. This input is particularly useful for mangling CVs.
SIG OUT: The main output, the result of the gate/trigger/pulse input or SIGNAL input.
PLS DLY: A short pulse used for triggering other events as pulse delay (or as self trigger when patching the EVENT back into itself).

Specifications:
Module width: 8HP
Module depth: 22mm
Current draw:
+12V: 50mA
-12V: 43mA
Read more
MRP:$143.72 SAVE 19%
coming soon $116.49
Items 951 to 1,000 of 1,031 on page 20 of 21
«  1  2  3  ...  19  20  21  »

Filter

Saved Searches
Save current search
Release Date
Close