Search dance music

Notes: Voltera is an expander for the Metron trigger and gate sequencer, adding 4 bipolar voltage tracks. Up to 16 Volteras can be connected to a Metron, providing up to 64 CV outputs.

With independent voltage ranges and quantisation settings per track, Voltera allows simultaneous real-time control of 4 different parameters, so you can set the track to the parameter you are sequencing.

When used in conjunction with Voltera, it is possible to easily sequence melodies and parameters with the Metron.

Features

4 bipolar voltage outputs in 4HP
Integrated user interface with Metron
Quantised and unquantised voltages
Up to 16 Voltera modules can be connected simultaneously to a Metron
Independent voltage ranges for each output
Analogue programming
Digital accuracy
Fast haptic operation
Power consumption: 60mA at +12V and 15mA at -12V

Depth: 43mm

HP : 4

Notes: The polyphonic BASS9 Bass Machine transforms a guitar into nine different basses and requires no special pickups, MIDI or instrument modifications. It relies on the same technology powering all EHX 9 Series pedals, like the award winning MEL9r Tape Replay Machine, but features a new algorithm maximized for transposing one to two octaves down with superior dynamics and tracking.

A rotary switch allows the user to select the sound of their choice, as follows:
PRECISION: Pays homage to the iconic Fender P Bassr
LONGHORN: Emulates the Danelectror 6-string bass, ideal for baritone type tones
FRETLESS: Features both electric and standup fretless basses.
SYNTH: A tribute to the classic Taurusr Synthesizer
VIRTUAL: Lets the user adjust the bass's body density and neck length for a variety of bass sounds
BOWED: Classic bowed bass
SPLIT BASS: Makes it possible for the guitarist to play bass on the lower strings (all notes below F#3) and chords or melody with the higher strings.
3:03: A polyphonic salute to the sought after Roland TB-303r vintage bass synth
FLIP-FLOP: Inspired by EHX's Octave Multiplexer, it provides a '70s style logic driven sub-octave generator that tracks without glitches.

The pedal is equipped with independent Effect and Dry volume controls so guitarists can precisely tune their mix at the Effects output jack, plus an always-active Dry output jack that outputs the input signal at unity gain.

Controls 1 and 2 have been designed to adjust specific parameters for each of the nine programs. For example, in PRECISION, CTRL 1 controls the sub-octaves while CTRL 2 imitates the original instrument's tone control.

Note: All third party trademarks referenced by EHX remain the property of their respective owners. Unless specifically identified as such, EHX's use of third party trademarks does not indicate any relationship, sponsorship, or endorsement between it and the owners of these trademarks. Any references by EHX to third party trademarks is to identify the corresponding third party goods and/or services and shall be considered nominative fair use under the trademark law.

Pays homage to nine of the best bass sounds ever
Tracks impeccably and works on guitar without mods, special pickups or MIDI implementation
Independent Effect and Dry volume knobs let you precisely control your mix at the Effects output
Controls 1 and 2 have been designed to adjust specific parameters for each of the nine programs
Dry output jack outputs the input signal at unity gain
Compact, rugged, easy to use
Power adapter included

SPECIFICATIONS
Circuit
Digital
Bypass
Selectable Buffered Bypass
Audio
Mono
Power Supply
9.6VDC-200mA power adapter included
Dimensions (in)
4.75 x 4 x 2.25
Current Draw
100mA
Year Released
2019

Notes: Expander module for the Tetrapad, Intellijel's multi-dimensional performance touch controller. Adds huge functionality, allowing you to sequence parameters and create complex modulation.

Supllier notes:
Tete is the long awaited and highly anticipated expander for the Tetrapad.

Some of the key features:

Three primary modes: VOLTAGES, NOTES and COMBO.

VOLTAGES mode:

Up to 16 voltage storage locations (grid) with 8 voltages stored at each location.

You have the choice to record and playback your recall of these locations in a looper style (just play freely and spend arbitrary amount of time at any location) or as a clocked sequence (SH-101 style). Additionally you can traverse the matrix using the X and Y CV inputs to get Cartesian style sequencing.

There is also variable slew that allows you to morph/glide between the values.

NOTES mode:

You can create sequences or loops in chord, scales or keyboard mode. The isomorphic keyboard grid can vary from 4 notes to 12 notes max. There are real-time performance looping, transposition and inversion capabilities via the CV inputs and dedicated loop button. In sequencer mode each step can be a tie, rest, or gate with size 25/50/75%. Basically we have created a way to very quickly and intuitively make chord sequences that are very musical and easy to manipulate. It is difficult to summarize in words but we will be sure to create some videos to demonstrate how easy and fun this is to play with. It definitely represents something unique in the landscape of Eurorack sequencers.

COMBO mode:

In this mode you can loop record your performance on any combination of the following functions:

fader, bipolar fader, drum hit, switch or LFO. Kind of like Elektron style parameter locking but all of the motions is recorded continuously instead of just in slices. Instantly turn a simple patch into a highly animated and complex beast.

With all of the above mentioned loop recording modes you can very easily overdub since the Tetrapad detects pressure/pressing. In combo mode you can erase individual channels.

All modes allow for internal or external clocking and configurable syncing.

All of the modes have special XYZ CV modulation assignments and make use of the dedicated CV outputs.

For example, in Looper mode one of the CV outputs generates a continuous ramp that represents the position in the loop. This can be used with devices like the Planar 2 in Interpolation mode to sync the recorded patterns together no matter what tempo.

Notes: Ten-channel version of Mackie's new compact ProFX mixer, ideal for home studio use or small live setups. Built-in USB interface and digital effects section. Great value.

Supplier's notes:
The Mackie ProFX10 v3 10-Channel Professional Effects Mixer with USB is the ultimate affordable solution for live sound, home recording, and content creators. Now with our renowned Onyx mic preamps that offer 60db of headroom, everything from gain hungry mics to guitars will sound better than ever, and you can keep it all in check with simple single-knob compression. The new GigFX effects engine offers 24 built-in FX for even more options for adding the finishing touch. Record your tracks in 24-Bit/192kHz quality with 2x4 USB I/O plus zero-latency hardware monitoring for easy overdubs. Both ProTools First and Waveform OEM recording software/plugin packages are included.

Notes: Instrument Interface is a Eurorack pre-amp capable of bringing any type of audio signal to modular levels, thanks to its amplification circuit.

The module can drive regular and condenser microphones (+48V Phantom Powered), as well as Instrument and Line signals with a very low distortion ratio.

Going further from the regular re-amp operation, Instrument Interface offers some additional extra functions like a Trig/Gate extractor and Envelope Follower circuits, allowing you to use the character of your audio signal in more creative ways.

Notes: The Ar Merc'het Brao module is comprised of two filters and two overdrives.

As usual at Touellskouarn it has a Breton name: Ar Merc'het Brao means "The pretty girls".

It can be used with a stereo signal or with two mono signals. The module is modular as well as guitar friendly.

The filters are resonant with a slope of -12dB. A switch allows to switch each filter from LowPass to HighPass. The filter cut-offs are voltage controlled thanks to dedicated CV inputs. Additionally, the Ar Merc'het Brao features global controls for cut-off and resonance.

Both overdrive sections offer the classic and well known TouellSkouarn distortion sound.

Notes: The BF-22 VCF is a dual Hi/Low-pass filter inspired by the Sallen-Key filter from the early MS-20.

DISCLAIMER: This filter brings to your modular system the character of early MS-20 sound: Kick-ass-rocking-dirty screams! It inherited not only it's amazing sound, also MS-20 noise floor. If noise floor is an issue for you, this might not be your filter.

Features:

Dual-channel Sallen-Key Filter. Inspired by the early MS-20
High and Lowpass operation.
Two CV inputs per channel with a dedicated atenuverter for the first one.
CV controlled resonance.
The first channel can be linked to the second one with the "Link" switch.

Specifications:

Current needs: +12V: 40mA, -12V: 20mA
Width: 17 HP
Depth: 30mm (including power connector)
Aluminiun, heat-treated front panel
Designed, kits prepared and completed modules assembled in Barcelona.

Notes: Crush Delay v3 is a special Echo-Delay unit based on the PT2399 IC, which is able to offer 400ms of clean delay and up to 2 seconds of dirty repetitions, having a special talent to generate noisy-glitch textures. The module bases its operation on controlling the PT2399 chip with circuit bending techniques, converting the unit in an advanced VC digital trash generator. This third version comes with some interesting new features like redesigned VCAs circuits, wider range for clean delay and reduced depth to make it skiff friendly.

The module features a few VCAs to provide a flexible signal route to maximize module's possibilities. First two VCAs at the inputs to control the amount of signal sent to the delay. The first is routed to both the dry/wet mix and the delay, and the second directly to the delay. Combining the second VCA and the FX Send output allows external feedback routings.

Compared with v2, this third version offers a bigger range of clean delay time as well as a revision of some of the Crush modifiers. Combining those modifiers you will have a access to a vast palette of noises and textures that can be used in many different ways. From ambient/drone patches to even percussion sounds.

The VC Feedback features an automatic gain control to keep levels stable at any feedback level.

- Current needs: +12V: 135mA, -12V: 35mA
- Width: 11 HP
- Depth: 30 mm (inc power connector)
- Aluminium, heat-treated front panel
- Designed, kits prepared and modules assembled in Barcelona

Notes: The S-Com 4 is a compact and versatile single-rack space device that provides four channels of high-quality dynamic processing with an Expander/Gate and Compressor/Limiter on each channel.

The four channels operate independently or in stereo pairs. Its multi-segment LED metering displays input/output level as well as gain reduction. The Expander/Gate section features a continuously variable Threshold control, as well as a switch for fast or slow release times. The Compressor/Limiter section includes variable Threshold, Ratio and Output levels. S-Com 4's Enhancer switch restores high frequencies that are sometimes diminished by heavy compression.

This wide-ranging combination of features makes the S-Com 4 an efficient and versatile audio tool for a wide variety of applications. Its clean and quiet audio characteristics make it ideal where high sonic integrity is imperative.

Notes: Goldring D22GX stylus is designed to fit the current Goldring 1022GX phono cartridge or old model 1020 or 1022, a direct replacement when your stylus is worn - saving the cost of buying a whole new cartridge. Goldring cartridges generally last many hours until the stylus needs replacing. An indication of wear is a "duller" sound.

Simply remove your current stylus by carefully pulling it away from the cartridge and replace it with the replacement.

The 1022GX record cartridge is recommended for the discerning listener. The diamond stylus is a Vital PH type, which provides increased resolution and ensures the maximum accuracy of musical reproduction.

Replacement stylus: 1022GX - D22GX

Notes: The Allen & Heath ZED-10 mixer is an amazing little desk for small band mixing. It is ultra portable for carrying to the gig, and can be used for recording live or in the studio. It comes with configurable USB audio input/output making it easy to capture stereo recordings.

Guitars can be plugged in directly to the mixer using the specially designed high-impedance inputs, while the mixer has two stereo inputs for MP3/CD players or keyboards.

Equipped with professional XLR stereo outputs and a flexible monitoring section with headphone and speaker feed outputs. The ZED-10 is bundled with IK Multimedia's AmpliTube X-GEAR software, giving access to superbly modelled amps and effects.

Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED-10 is super-flexible and super-easy. No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED-10, select the USB routing on the mixer and the device on your computer and that's it. CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations.

SEND OPTIONS
1) Main Mix Left + Right (Post master Level)
2) Aux + FX bus (Aux is a pre-fade send, FX is a post-fade send)
3) Record Bus Left + Right (Separate stereo bus to Main Mix)

RETURN OPTIONS
1) To Playback input (through jack socket break contacts)
2) To Stereo 2 channel (through jack socket break contacts)

ZED-10 features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ - with optimised slope (or Q factor) for equalising individual instruments.

ZED-10's pre-amps are similar in design to our MixWizard range of mixers, but with a twist! Inputs 3 & 4 have a high impedance jack input capable of taking either a normal line level or a low level input from a guitar pickup. These newly designed inputs have been crafted with the aim of replicating the sound of a classic guitar or instrument tube pre-amp in a combo or head amp. An extremely high input impedance ensures loading on pick-ups is minimal and a Class A FET (field effect transistor) circuit powered from 48V is employed to give the valve-like gain stage. There is a gain "Boost" switch associated with the guitar inputs which boosts gain by 26dB to cater for instruments with very low level outputs and the overdrive characteristics of the guitar inputs are very similar to a valve (tube) circuit, being asymmetric and soft. All this makes for a wonderfully natural sound to be reproduced from the instrument, full of warmth and character

Notes: To add some space to your compositions and nuances in sound design Erica Synths Dual FX module brings you two identical sections of 8 custom effects with two adjustable and CV controllable parameters.
Dual FX combines two Spin FV-1 chips in one module, each filled with eight custom effect programs with two adjustable and CV controlled parameters per effect and analogue dry/wet circuit. All parameter settings can be saved with the effect and recalled instantly during the performance. Also the output of the first FX section is normalised to the second input so creating huge layers of effects is easy.

FX:

Mono delay
Stereo delay
Hi-pass delay
Big reverb
Saturated reverb
Stalker reverb
Ripper
Dual pitch shifter

Technical specs:

Audio output level: -5...+5V
CV level (full span): -5...+5V
Power consumption: 118mA@+12V, 61mA@-12V
Module width: 10HP
Module depth: 45mm

Notes: Erica Synths Bassline is fully analogue synth voice module for ultimate basslines and leads.

It features AS3340 VCO with three waveforms, a filter inspired by Erica Synths Acidbox and unique features - transistor based suboscillator and two BBD lines that emulate VCO detune creating a sound of massive polysynth from one oscillator.

Accent provides more expression to the bassline, by adding volume and opening the VCF slightly.

Notes: Erica Synths Black Hole DSP 2, an updated version of Black Hole DSP features 24 custom effects, designed in close co-operation of Erica Synths team rider KODEK and creator of SpinCAD software Gary Worsham. Each effect has 3 manually and CV controllable parameters, manual and CV control over sampling frequency for spanning from 48kHz to really Lo-Fi crunchy sound and full analogue dry/wet control. All effect parameter settings can be saved to the memory and instantly recalled with the effect, which makes Black Hole DSP II ideal for live performances.

Notes: A bit of a bargain in the turntable world. Reloop's budget model punches way above its weight, offering features, sound and build quality found on much more expensive models.

Supplier's notes:
The RP-2000 MK2 is a dependable turntable for prospective DJs. The MK2 version features several improvements, including a newly developed top panel construction and improved metallic buttons with enhanced feel.

Quality direct drive motor and precision-engineered die-cast platter:

Compared to belt-driven turntables, the RP-2000 MK2 transfers its motor force directly to the drive hub - this way a higher torque generates power faster on the precision-engineered platter with minimal wow and flutter. The adjustable pitch control with a range of +/- 8% is suitable for the finest pitch adjustments.

Statically balanced S-shaped tone arm:

The RP-2000 MK2 features a statically balanced s-shaped tone arm with hydraulic lift and anti-skating mechanism. Thanks to the universal SME connection, a large number of pick-up cartridges can be connected.

Newly developed top panel and sturdy housing design:

The new deep-black metallic top panel is equipped with metallic buttons for start/stop and speed settings. The improved touch upon hit offers a clear haptic feedback. With the push of a button the aluminium target light can be extended, so that the needle position can be seen in dark surroundings. The sturdy construction with optimized damping features and shock-absorbing feet improve isolation from unwanted vibrations.

With pick-up and headshell:

The RP-2000 MK2 comes with the high-quality OM Black pick-up, handmade by Ortofon in Denmark, pre-fitted to a headshell ready for immediate playback.

Notes: Polyphony is back!

Chord v2 is a plug and play solution for bringing musical polyphony to your system. It contains four oscillator voices, a multitude of waveforms, and intelligent tuning functionality. This new version features an expanded sonic palette and feature set in half the size of the original.

It features three primary modes of operation: Chord, Free Running, and Unison. These three modes allow the oscillators to be tuned as diatonic chords, run independently of each other, or be tuned to the same internal frequency for external v/oct sequencing through independent CV inputs.

The timbral possibilities of the Chord v2 bring its polyphonic tones to life. The module ships with eight banks of waveforms encompassing traditional shapes, vocal synthesis, organ emulation, and chiptune sounds. You can also load custom wavetables using the SD card slot on the front panel.

From harmonic drones to Switched On Bach, the Chord v2 is an unparalleled addition to any Eurorack modular.

Changes from v1:

- Half the size! 14HP down from 28HP
- Eight banks of waveforms
- Full polyphonic mode
- Harmonize in minor mode
- Custom wavetable compatibility
- Expanded chord types
- Improved synthesis engine

Notes: The EHX 22500 is a stereo looper with two independent loops that can be played in sequence or in parallel. Flexible performance controls and creative effects allow you to loop in any way you imagine. It records high quality, non-compressed audio directly to a removable SDHC card (4 to 32 GB) and each card holds up to 100 individual loops. Includes an 8GB card for up to 12 hours of recording time.

Creative controls over looping functions such as adjustable tempo, programmable loop/overdub length, and two loops that can playback independently or locked to one another makes the 22500 act like the looper of your dreams.

Download free drum loops for the EHX 22500

Dual stereo loops with independent or locked loop lengths
Sequential looping mode enables verse/chorus switching
Parallel looping mode allows simultaneous playback of two loops
16 built-in drum loops
Selectable microphone input with phantom power
Reverse and Octave functions
Undo-Redo your last overdub or recording
Quantize or non-quantize (free running) modes
USB port enables backup/restore to PC or Mac
Programmable third footswitch for Stop or Tap Tempo
Optional external Loop Up/Down Foot Controller
Power adapter included

SPECIFICATIONS
Circuit
Digital
Bypass
Buffered Bypass
Audio
Stereo
Power Supply
9.6VDC-500mA power adapter included
Dimensions (in)
5.75 x 4.75 x 2.5
Current Draw
235mA
Year Released
2015

Notes: Erica Synths Black Spring Reverb is a different take on spring reverberation units. Firstly, it has built in vactrol based audio compressor, secondly, it can operate an external tank and combination of both internal and external ones for effects unheard before, thirdly, in order to animate reverb effect, the module has built-in feedback effects - pitch shifters, delay, ring-modulator, etc; feedback amount and effect parameters can be controlled manually and via CV, making the module an experimental instrument on its own. Module comes with compact spring reverberation tank which can be easily installed in most eurorack cases.

Features
Compact spring reverberation tank to install in a skiff case
Manually and CV controlled feedback amount
Vactrol-based compressor
7 distinct feedback effects
Selection between internal, external reverberation tanks or combination of both
Feedback Send and Return jack sockets
The module is designed to be used with wide variety of spring tanks, but the best results will be using tanks with low input impendance - 8-200ohm

Technical specifications:
Audio input level -5V - +5V
CV level (full span) -5V - +5V
Power consumption 43mA, -71mA
Module width 12HP
Module depth 30mm
Internal reverb tank dimensions 190mmx67mmx24mm (30mm with spacers)

Notes: Clever little portable deck from German DJ gear specialists Reloop. Designed for mobile scratching or crate digging. Bluetooth streaming and USB recording too. Bonus.

Supplier notes:
The ultimate portable turntable.

Reloop SPIN is a portable turntable that guarantees mobile fun anywhere you want! The turntable comes with everything you need out of the box and is especially optimized for scratching and cutting.

Bluetooth streaming of your music:

The Bluetooth Audio Streaming technology allows wireless streaming of music or beats via SPIN - this way the turntable becomes a speaker for your smartphone.

Direct USB recording:

Via the USB recording function it is possible to record your scratches and cuts in MP3 format directly to an USB stick. This interface can also be used for digitizing records.

Includes 7" scratch vinyl:

SPIN comes with a 7'' slipmat and an exclusive 7" scratch vinyl containing specially mastered scratch samples and beats for beginners and experienced scratch artists alike.

Flexible power options:

Enjoy your records on the road: SPIN is extremely portable, not only due to its shape and small form factor, but also thanks to its flexible power options. It can be used with a regular USB power supply unit (5 V, 2 A), USB power bank or rechargeable batteries. The batteries can be inserted in the compartment on the bottom and are sold separately. A power LED keeps you informed about the turntable's operational status. The dust cover protects the turntable and thanks to the handle, SPIN can be carried like a suitcase. Skip-proof rubber feet guarantee stability.

Outstanding for mobile scratching and cutting:

Via the switch on the turntable's top panel you can select between 3 speeds (33 1/3, 45 & 78 rpm) which covers all available speeds. The straight tone arm offers enhanced stability and can be fixed into position with a transportation lock. The pre-installed cartridge has excellent tracking features and holds the groove tightly, even when carrying out fast scratches.

45-mm Crossfader pre-installed:

The precise 45-mm crossfader has a unique form factor and thanks to the two-rail technology it is especially sturdy. Moreover, it is possible to install the crossfader on either side of the platter - simply select your preferred position.

Extensive controls & adjustment possibilities:

On the top panel you can find a start/stop button as well as a pitch control with a range of +/-20 % for precise setting. A tone control can be used to adapt the sound of the lows to your requirements. Volume for the AUX input and master/headphones output can be adjusted via two separate controls. There is also a 7'' adapter for records with a large centre hole.

Reloop SPIN - Connect through vinyl:

Through the combination of turntable and mixer as well as the high connectivity, SPIN is ideal for vinyl lovers as well as scratch artists and aspiring DJs.

- Inputs: AUX 3.5 mm stereo, Bluetooth audio
- Outputs: master RCA, USB (USB-A), headphones 3.5/6.3 mm stereo
- Dimensions: 370 x 95 x 260 mm
- Weight: 1.61 kg

Notes: Your Palette case is the ideal solution for your space conscious and portable needs. At about the same size as a small laptop, your Palette fits comfortably on your desktop; in your backpack; at your favourite coffee shop; in your jam space; or pretty much anywhere else you might desire to play. Your imagination is the only limit. With 62hp of rack space, you can piece together powerful but focused mini systems and control surfaces. Intellijel's 1U row and built-in i/o ports add a ton of extra utility to bring the most out of your Eurorack modules. Truly a palette for the sonic artist.

Utilities panel:

- Dual 1:4 buffered multiple
- Two 1/4" balanced audio jacks that can be connected to the Stereo Line Out 1U, Pedal I/O 1U or Mixup
- 1/8" (6.35mm) MIDI Input that can be connected to uMIDI 1U
- USB port that connects to the uMIDI 1U and other future modules
- Rocker switch and barrel plug for power entry

Construction:

- Anodized aluminium
- Aluminium extruded rails with steel threaded inserts
- Rubber feet to protect your desktop
- Rear mounted power supply for maximum module depth

Includes:

- 40W Meanwell AC/DC adapter with right angled connector
- 3FT North American IEC power cable
- 1/8" (6.35mm) TRS to 5-Pin Din MIDI adapter

Notes: Mission Control

All the essentials to control and sync your Eurorack modular from your computer, iPhone/iPad, or hardware MIDI device. No menu diving or configuration scripts, just two buttons. Get crazy with external modulation and sequencers, or just sync your rack's clock from the rest of your MIDI bus.

Bridge Your System

The uMIDI provides all the essentials to control and sync your Eurorack modular from your computer, iPhone/iPad, or hardware MIDI device with a minimum of fuss. No menu diving or configuration scripts, just two buttons. The connectivity, features, and compact size allows the integration of your modular system with the rest of your studio while not taking up too much space in your case.

The upper clock section features a dedicated 16th note clock output ideal for synchronizing a Eurorack sequencer like the Metropolis. A second clock output with selectable divisions can be used when different sync events are needed. The run and reset outputs can be used to reset your Eurorack sequencers in tandem with any external sequencer or DAW.

The lower half of the uMIDI gives you everything you need to control a single-voice synth via MIDI. Just connect either a USB or DIN MIDI cable to the module, LEARN a channel, and start playing.

As of firmware revision 1.11 the uMIDI supports configuration of some internal parameters via a browser-based configuration utility. Currently the utility is only compatible with Google Chrome.

Features

High speed ARM processor for low latency & jitter.
DIN or USB MIDI input.
Two clock outputs, one with selectable divisions.
Sequencer sync via run and reset outputs.
Precision 0 - 10 V note pitch output with pitch bend & portamento CC support.
Gate and trigger outputs for envelope triggering.
Mod wheel and continuous controller outputs for additional modulation.
Firmware updates and configuration over USB.

Specifications

Width: 6HP
Depth: 40mm
Power: 3mA @ -12V, 47mA @ 12V

Notes: The Polaris is a 4-stage cascaded OTA filter designed by David Dixon. It builds on the lineage of the Dr. Octature and Atlantis filters, but with a totally revised core and resonance control. Along with dedicated LP, HP and BP outputs it features a configurable MULTI output capable of an unprecedented 27 different filter modes.

With drive turned down the Polaris is capable of buttery smooth filtering, and the cutoff control range has been fine-tuned for playability. With the drive dialled up and the new asymmetric multi distortion circuit engaged it creates a more aggressive sound. Not content to be just a filter, the Polaris's AP phaser mode combined with frequency modulation can be used to achieve a phaser effect.

With so much versatility in a modest size, the Polaris is an ideal filter for a starter system and an excellent addition to the tonal palette of a larger modular.

Notes: Next-generation monophonic analog synthesizer in a vivid five-colour line-up:
Fully programmable, analog synthesis for all players; monologue is the next-generation monophonic synthesizer that shares the spirit of the acclaimed minilogue, with a completely new voice and powerful new features.

The monologue is a 25-key, fully programmable monophonic analog synthesizer with a voice all its own. While sharing its sleek layout, knob-per-function workflow and high-quality construction with the best-selling minilogue, monologue is a truly unique new synth for all types of musicians; featuring new voicing and sound sculpting abilities - at an amazing price. The monologue's completely new filter, modulation, drive, and LFO can generate powerful basses and sharp leads, creating awesome mono sounds that showcase its single-voice design. The step sequencer has also been dramatically expanded, allowing more intuitive and more complex editing. With a line-up that gives you a choice of five eye-catching colours, this compact instrument has a strong personality to match your own.

Redesigned monophonic analog circuitry:
The monologue contains monophonic analog synthesizer circuitry that builds on the circuitry of the minilogue. But that doesn't mean that the monologue is simply a one-voice model of the minilogue. It's a monophonic beast with stunning power that comes from a redesigned envelope section, modulation routing, and a filter with powerful low-end punch.

The structure is 2VCO, 1VCF, 1EG, 1VCA, and 1LFO. In addition to the same distinctive circuits as on the minilogue (such as the wave shaping that shapes the overtones of the oscillator, and a sync/ring switch), the filter section uses a two-pole filter to deliver aggressive sound. Newly featured is a drive circuit that adds overtones and distortion to the sound, letting you generate fat basses and sharp lead sounds to your heart's content. The LFO rate can be adjusted into an unprecedentedly ultra-high-speed range to generate crazy space-shattering sounds, or switched to one-shot mode to act, in a sense, as an additional envelope.

Fully programmable:
The monologue goes beyond analog synths in its price range by adding 100 preset locations. Select a program for instant access to great sounds - - ranging from thick basses to deep subs to brilliant cutting leads and even percussive sequences. No need to have deep synthesis knowledge; just choose a sound and tweak - a workflow that is very familiar with musicians today. Built-in programs provide 80 preset sounds and sequences made by creative artists around the world including legendary electronic artist Aphex Twin, plus 20 user locations for saving custom sounds.

16-step sequencer for highly-evolved motion sequences:
The step sequencer of the monologue has been significantly enhanced to deliver musical, complex rhythms that are easy to capture, see, and edit. It supports both real-time recording with overdubbing capability as well as step recording that lets you record simply by pressing keys in the desired order, and you can also use the 16 physical buttons for quick editing or for improvisatory performance. The motion sequence function lets you record up to four knob movements to apply time-varying change to the sound, and allows you to record not only continuously changing values as on previous models, but also values with step-wise variation. Since it's designed to let you create different sounds at each step, you can make unprecedented sequences, such as a sequence that generates a drum pattern from a single program.

There's also a key trigger function that lets you play back a sequence while you hold down a key, and even transpose it. Another new function is slide, which can be used to produce smooth bass lines by specifying portamento for each step.

Battery-powered analog:
From smooth curves to muscular straight lines. The stylish visuals featuring aluminium and wood are inherited directly from the minilogue, but have been modified to a straight, direct design that bespeaks the power of a monophonic instrument. In spite of its stout construction, the compact and light-weight body is only 1.7 kg / 3.78 lbs., providing an unprecedented combination of toughness and portability.

In addition, unlike most analog synthesizers in its class, the monologue can operate on batteries. Even if you're a hardware performer who uses numerous units, you won't need to worry about providing additional power supplies and installation space.

Sync with Audio Sync:
In addition to 5-pin In/Out and USB MIDI, monologue includes Audio Sync connectivity, which allows it to play in time and integrate seamlessly with KORG volcas, electribes, minilogue and SQ-1. Use the monologue with your DAW as a USB MIDI controller or a versatile analog voice. Send clock over USB and use Audio Sync to chain monologue's clock to other Audio Sync-equipped products.

Notes: Kamieniec is an analog signal processing module directly inspired by a range of classic phaser effect units from 1970s that helped to define entire musical genres. Most of these classic devices contained a fairly small number of phase shifting stages, but made up for that lack with tons of character! However, what was initially intended for guitars is not necessarily sufficient for synthesizers. Therefore, the intention is to preserve the classic sound as it's transported it to a new tonal space while prioritizing flexible modular usability.

Just like many of the famous OTA-based phasers of the 1970s, Kamieniec sports four tuneable stages. However, there are two additional fixed stages included so as to increase the number of notches, and ultimately offer two versions of the mixed signal (that may be used as a stereo pair) at the two outputs of the unit. While the general topology is similar to a certain very classic phaser pedal, the circuitry has been redesigned with modern components and low noise op-amps to bring down the noise floor, improve the bandwidth, and offer a wider range of tuning. The feedback control can be set extremely deep, which results in a very high resonance that is capable of self-oscillation. This produces a unique sound otherwise unreachable for typical phasers, which can vary from subtle and creamy to utterly brutal and grinding. On top of that we've included switchable feedback paths, individual stage group outputs, CV inputs, built-in LFO, and daisy chaining ability to provide a comprehensive integration with a modular synthesizer system.

Expandability:
Unlike any other phaser module, multiple Kamieniec units can be chained together to achieve a more radical response with many notches. The general idea of chaining is to pass along the phase shifted signal to subsequent units before it is mixed with the original version in the last unit of the chain. This approach has a very different effect than plain cascading (connecting multiple phaser units in series), because a long chain of allpass sections yields a dense and uniform pattern of multiple notches, exactly like in a long phaser.

- Eurorack synth compatible
- 9hp, skiff friendly
- Current draw: +40mA / -40mA
- Reverse power protection

Notes: Bass Bot is an intelligent sequencer featuring 21st century transistor technology. An analogue, monophonic synthesizer with classic step entry programming by the user or Bot computer-generated patterns. Seven unique preset personality programs, capable to generate up to 224 read only computer generated presets by the Bass Bot. An additional 224 Write Editable Patterns can compose up to 7 songs of up to 127 bars. All information is saved to on-board flash (permanent) memory and transferable directly to other Bass Bots via 8 DIN cable, (unit cloning) or to PC/MAC (backup) computers for storage with a downloadable transfer application available.

Supplied with Euro two pin to UK three pin adapter

Notes: Stereo compressor in only 4HP!
The module was mainly designed as a dynamic tool for subgroups and sums, but also works well with single signals. Similar to classic DBX units, threshold, ratio and gain can be adjusted with just one knob. Further fine adjustments can be made for attack and release times. In addition to compression, the module can also be used as a limiter. Ducking effects can be created via a sidechain input.

The MSCL is equally suitable for subtle and strong compression effects. Ratio (1.25:1 to infinity), make-up gain and threshold can be adjusted with a single potentiometer. The threshold works in the opposite direction as the other parameters. In addition, there is a threshold switch that can be toggled between three value ranges (-15 dBu, -4 dBu, +5 dBu). This allows the MSCL to be used with other audio signals outside the modular system. In addition, it is possible to limit the gain control range by 3 dB or 9 dB. This makes the module behave similar to a peak limiter. The attack and release controls can be used to adjust the settling phase and the decay time of the compressor. At the output, it is possible to increase the gain by up to 35db. With the switchable sidechain channel, the MSCL can also be controlled by external signals.

Features:

Sidechain input for classic ducking sounds
Easy and intuitive design
Threshold switch lets you compress modular level signals as well as lower level sources
Limit switch limits the makeup gain on the comp knob to make compressor act more like a peak limiter
Power consumption: 50mA at +12V and 50mA at -12V

Depth: 38mm

HP : 4

Notes: TouellSkouarn Strakal Brulu is a handmade distortion and fuzz module. The great sound is due to the new-old-stock east-German germanium transistors.

Very characteristic for the module's sound if the feedback that is coupled to the feedback. The more fuzz, the more feedback - the Strakal Brulu 2 can get pretty nasty and it screams a lot at high fuzz settings and low input level. The fuzz amount can be voltage controlled, with an inverse attenuator. Input and output levels can also be set separately.

Notes: Tetrapad is a versatile, multi-dimensional, touch-sensitive control surface for Eurorack. Each of its four pads use force sensing resistors to respond to both the vertical position of your finger and its pressure. Four push encoders and a shift function give you even more tactile control over your modular system.

Tetrapad operates in numerous modes - each of which configures the module to perform a specific control task. Through these modes, Tetrapad can emulate a bank of faders; a voltage storage device; a finger drumming surface; a chord generator; an 8-key keyboard; four independent LFOs; or an 8-switch panel. The chosen mode determines what type of signal (CV, note, trigger, gate, etc.) is sent from each of Tetrapad's eight independent outputs, while its multitude of multi-coloured LEDs keep you informed of exactly what's happening within each mode.

Tetrapad automatically remembers how you've configured each of its modes and retains these settings when powered off. By default, Tetrapad automatically saves these settings every minute, or whenever you change modes. This makes Tetrapad ideal for live performance, since you know it will always power up with your configurations intact.

Notes: The WAV Recorder from 4ms Company is a high fidelity, two-channel stereo audio recorder with basic playback features. Accepting a wide range of input signals, from line-level to modular-level, the WAV Recorder stores audio onto a microSD card in lossless .wav format up to 96kHz/24-bit. The trigger jack can be used for capturing rhythmic loops or synchronizing multiple WAV Recorder modules for multi-track recording. In Playback mode, the trigger jack or button plays the most recent recording. A simple file/folder navigation system can be used to browse the folders on the card for playing back .wav files. A Gain knob allows for up to +20dB of boost, and an LED Signal Meter indicates clipping and the signal level.

Notes: Whether you want to sequence MIDI or analog synthesisers, Crazy8 is your trusty companion to handle all your sequencing needs! Twisted Electrons have multiplied the power of the Acid8 step sequencer by 8, allowing for easy to set up crazy sequences and songs . With just a dash of randomness into the mix, it will help you create truly innovative melodies and lead lines. Play with polyrhythms. Improvise and be inspired.

Crazy8 features 1 Rotary Encoder, 22 Buttons and 86 subtle white LEDs with 2 levels of brightness to visualise 4 patterns at once!

8 Crazy Tracks:

4 Polyphonic MIDI tracks with chords: send on MIDI port 1 (MIDI Type A)
4 Analog CV/Gate tracks: also send MIDI on MIDI port 2
Polyphonic CV! (4 voice chords)
Sync in and out
MIDI Clock input and output, MIDI Slave and Master supported (MIDI Type A)
MIDI pattern "Feeding" and transposing
Heads up mode to display all active steps and chords at a push of the button
Custom CV calibration per note
Independent length per pattern: up to 16 steps per pattern. Chain up to 8 patterns for 128 step patterns
Independent playback per track: Forward, backwards, pendulum and random
Independent rates per track: /4, /3, /2, x1, x2, x3, x4, x8
8 Levels of Swing & 2 swing modes
Variable duty per pattern
Crazy effect per pattern: values 1-8 reduce probability of step, values 10 to 16 add musical improvisation based on the pattern's content
Offset step playback per track
Transpose all tracks to any key with ease
SYSEX memory storing/recalling
MIDI real time pattern feeding
Sequence transpositions (key tracks)
No menus, no BS

Notes: The TT-78, from Cyclone Analogic, is the next step in their collection of classic reproductions of iconic drum machines. The TT-78 is modelled after the classic CR-78 drum machine from Roland, produced in 1978. The TT-78 contains all the modern upgrades one would expect, while also being housed in a sleek shell, similar to the TT-303 and TT-606. It has the same intuitive sequencing functions as the previous Cyclone Analogic unit, but with a completely different sound palette, using sounds like Bongos, Congas, Maracas, and Guiro. There are seven individual outputs, providing independent jacks for most of the sounds. It also comes complete with MIDI In, Out and Thru, for synchronizing the TT-78 with all one's other gear.

*Supplied with Euro two pin to UK three pin adapter*

Notes: A solid entry-level option for beginner DJs and vinyl collectors. Impressive sound quality and solid, durable build. Includes high-quality Ortofon OM Black cartridge and headshell.

Supplier's Notes:
The RP-1000 MK2 is the ideal turntable for prospective DJs and HiFi enthusiasts. The MK2 version features several improvements, including a newly developed top panel construction and improved metallic buttons with enhanced feel.

Precision-engineered die-cast platter and belt-drive motor:

Unlike direct-drive turntables, the RP-1000 MK2 uses a belt-driven motor to de-couple the drive unit from the precision-engineered platter and chassis. The elastic, high-quality rubber belt absorbs and reduces unwanted vibrations, resulting in distortion-free playback. The adjustable pitch control with a range of +/-10 % is suitable for fine pitch adjustments.

Statically balanced s-shaped tone arm:

The RP-1000 MK2 features a statically balanced s-shaped tone arm with hydraulic lift and anti-skating mechanism. Thanks to the universal SME connection, a wide variety of pick-up cartridges can be connected.

Newly developed haptic touch and sturdy housing design:

The new deep-black top panel is equipped with metallic buttons for start/stop and speed settings. The improved touch upon hit offers a clear haptic feedback. With the push of a button the aluminium target light can be extended, so that the needle position can be seen in dark surroundings. The sturdy construction with optimized damping features and shock-absorbing feet improve isolation from unwanted vibrations.

With pick-up and headshell:

The RP-1000 MK2 comes with the high-quality OM Black pick-up, handmade by Ortofon in Denmark, pre-fitted to a headshell ready for immediate playback.

Notes: Erica Synths Black Output is a high-quality output mixer and a stereo panner with balanced outputs and headphone amplifier for monitoring your modular masterpieces.

All inputs are buffered, we use stereo potentiometers (similar to those used in high quality studio mixers) for panning, IN4 is a stereo input with simultaneous level adjustment for both channels, IN3 has a CV controlled auto-pan function. There is also a 6.3mm jack for the balanced outputs and headphones.

Notes: Since we pioneered guitar amp & effects modelling in 2002, IK Multimedia has spent more time studying guitar and amp recording than possibly anyone else on the planet. Modelling over 400 pieces of gear has required tens of thousands of hours painstakingly measuring the interactions between instruments, pickups and amplifier circuits, not to mention the cooperation of the world's most iconic guitar players, amplifier manufacturers, and engineers to learn how to create and capture great guitar tones.

AXE I/O brings all that experience to you.

AXE I/O is a professional 2 in/5 out audio interface - and controller - designed specifically with the needs of the recording guitarist in mind, providing best-in-class sound quality and powerful features aimed squarely at making your recordings faster, easier and better than ever.

AXE I/O offers an exclusive triple-topology, fully discrete input circuit, with both PURE and JFET input stages, to go from transparent to tube-like with just a single switch.

Its patent-pending Z-Tone impedance-adapting circuit interacts with your guitar's pick-ups to give you a massive range of tonal flexibility, you've never heard before.

Plus AXE I/O includes a dedicated Amp Out, so you can process your recording with real guitar amps and stomps without the need for external accessories (and without having to unplug your existing connections!). This low-noise out also eliminates ground loops, to keep even the highest-gain re-amplification as quiet as possible.

And AXE I/O seamlessly integrates with the included AmpliTube 4 Deluxe to select presets and control values via the front input knob, and lets you connect pedals and switches to get the most from your virtual rig without ever taking your hands off your axe.

We even included an onboard tuner so you can be ready to record in an instant whenever inspiration strikes.

Every element of AXE I/O has been created with no-compromise quality and real-world usefulness.

It's the interface we wish we'd had all along.

Notes: Steppy is a 4-track programmable gate sequencer with eight internal memory slots, external clocking, numerous tweakable parameters, and a performance-first design aesthetic.

Each track features numerous independent parameters that govern its playback independently of the other tracks. Specifically:

- Each track has its own length, which can range from 1-step to 64-steps, allowing for polyrhythms, fills, or constantly evolving gate interactions between tracks.
- Each track has its own gate length, which ranges from very short to very long, with tied gates possible at the extreme setting.
- Each track has its own clock divider, allowing patterns to play out over completely different periods of time.
- Each track has its own swing setting, which offsets the timing of every other step.
- Each track has its own delay setting, which offsets the timing of every step.
- Each track has its own probability control, which sets the likelihood that each programmed gate will fire when called upon by the pattern.
- Each track can be shifted (or 'rotated') forward or backward by a number of steps. So if you've created a pattern that 'feels' like it has its downbeat on step 3, you can shift that pattern two steps to the left, so that the downbeat sits on step 1.

Tracks can be programmed by entering active steps on the grid or tapped in live as the sequence is moving. Tracks can be selected and modified in real time as the sequence plays. A select button allows you to directly access each track (and each page of 16 steps within that track) directly through Steppy's intuitive multifunction buttons array.

Tracks can be individually muted and unmuted, and a special performance mode (called "Loopy") enables you to touch any two gate steps and instantly create a performance that loops between those steps.

Track patterns can be cleared without clearing its playback parameters, and all track patterns (along with their individual playback and performance parameters) can be saved as a preset to one of eight internal memory slots.

Notes: Hybrid compact mixer / 4x4 USB interface:
ZEDi-10 combines the robustness and hands-on control of an analogue mixer with a high quality 4 x 4 USB interface, making it a perfect all-round choice for musicians, recording artists and venues. Whether it's bouncing ideas around at home, performing live or recording tracks to share on YouTube and Soundcloud, ZEDi-10 is a versatile companion for every step of the creative journey.

The studio quality, 24-bit / 96kHz, 4×4 USB interface makes it easy to capture stunning multitrack recordings direct from the mixer to a Mac or PC without the need for any extra equipment. Featuring the new GSPre boutique preamp design, developed from the revered GS-R24 studio recording console, the ZED boasts exceptionally low noise and massive headroom, with a signature analogue warmth and depth. Guitarists will be pleased to know that two of ZEDi-10's mono channels feature Guitar DI high impedance inputs, allowing guitars to be plugged straight into the mixer without the hassle and expense of carrying separate DI boxes.

Mixer + USB interface:
ZEDi-10 offers the best of both worlds, incorporating a studio quality 4 in / 4 out, 24-bit/96kHz USB audio interface for hassle-free multitrack recording and playback to/from a Mac or PC, or to an iOS device using the iOS camera kit. The USB output source can be set up in several different ways to match your workflow.

Cubase LE Music production software included:
ZEDi-10 comes with the acclaimed Cubase LE software. Cubase LE offers powerful yet easy-to-use software tools for audio recording, editing, MIDI sequencing and mixing. Its vast range of proven editing and sequencing tools can be used for a large range of music styles and areas of application. From singers and songwriters recording vocal lines to rock bands jamming in their rehearsal room, Cubase LE is as easy as it gets - with outstanding audio quality as well as time-saving recording and editing functionality.

Cubasis LE mobile music production app:
The mixer also comes bundled with the Cubasis LE app. Cubasis LE is the compact version of Steinberg's streamlined, multi-touch sequencer for the iPad, providing the same look and feel of its bigger brother Cubasis. Specially designed for quick and easy operation, Cubasis LE makes recording, editing and mixing a breeze.

Exceptional audio quality:
ZEDi-10 features an exceptional new preamp design, created by analogue guru, Mike Griffin and developed from his highly acclaimed GS-R24 studio recording console. Known as GSPre, the preamps deliver exceptionally low noise and massive headroom, and the warmth and depth that Allen & Heath's analogue range is famous for. For tonal shaping, the precise 3 band MusiQ EQ controls have been carefully calibrated for responsiveness and precision, making it easy to shape and enhance each musical source.

Road tough:
All ZED mixers are designed and built to Allen & Heath's legendary touring grade standards to ensure a long life in the toughest environments. All channels are on individual, vertical circuit boards and all rotary controls are secured to the front panel with a steel nut to guard against impact damage.

Made for guitars:
ZEDi-10 comes with two Guitar DI high impedance jack inputs, allowing guitars to be plugged straight into the mixer without the need for DI boxes. That's one less piece of gear to buy, carry and set up.

It's an Allen & Heath:
Allen & Heath has been a trusted name in professional audio since 1969. The ZED technology advances, but the commitment to audio excellence and build quality endures.

Notes: Desktop Eurorack moduile case 3U - 104HP with power supply on the left side.

Plexiglas side panels 5mm thick.

Aluminium chassis.

6cm deep, but only 4cm deep all along the 5HP of the power supply. Check your modules before!

Tech specs:
- Width : 104HP
- Depth : 6cm
- Depth all along the 5HP of the power supply : 4cm
- Current Consumption : +12V : 2.4A ; -12V : 1.2A ; +5V : 0.5A

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Effects masters Eventide serve up a lush bucket brigade chorus inspired by the analogue classics of the 70s and 80s. Three chorus voices plus MicroPitch detuning for stereo width and complexity.

Supplier's Notes:
Short Description: Stereo Bucket Brigade-style Tri-Chorus with Psychedelic Swirl; Eventide's lushest chorus ever! Product copy: Deep Modulation & Dreamy Textures

Inspired by the classic Tri-choruses and stompbox choruses of the 1970s and early 1980s, the TriceraChorus pedal pairs rich Bucket Brigade-style chorusing with Eventide's legendary MicroPitch detuning for a lushness that rivals the jungles of the late Cretaceous Period. TriceraChorus features three chorus voices and three unique chorus effects which can be used to create a wide stereo spread with pulsing waves of modulation. The innovative "Swirl" footswitch adds psychedelic flanging, phasing and Univibe-style tones. It has never been easier to dial in syrupy smooth deep modulation on guitar, bass, synths, strings, vocals and more.

Deep Modulation & Dreamy Textures

TriceraChorus has three chorus voices: Left, Center, and Right, which can be detuned to add even more depth. A three-phase LFO modulates the delay times for these voices, producing a dazzling movement across the stereo field. The combination of the three modulated delays creates a huge wash of chorus reminiscent of that big, dreamy '80s sound.

A Trifecta of Tone

Like the mighty three-horned Dino, TriceraChorus is a powerhouse of chorus offering three effect types complemented by detuning and Swirl. For a quintessential vintage chorus sound, set TriceraChorus to "Chorus" mode. If you need something with more complexity and movement, "Chorale" produces lush, heavenly choruses inspired by classic rackmount Tri-chorus units. For a more warbly, pulsing effect, try "Vibrato." Add detune for subtle pitch shifting sweetness. Engage the "Swirl" footswitch to get lost in a whirlpool of kaleidoscopic sound.

Notes: The Germanium Filter is Death By Audio's love letter to sticking a pencil in your speaker.

Start with a console-style drive circuit, add in a dash of obsolete germanium transistors and finish it off with a super intense DBA-style filter - BLAMO! You've got a sound heavy enough to crush on and sharp enough to slice a tomato.

The Filter control is extremely unconventional - it'll take you from bottomless, sub-woofered out lows to super searing and brittle highs, with a universe of tone in between. The Germanium Filter will help you find the sweet spot for your instrument in any situation - at a show, in the studio, or even stranded on the side of the highway after your tour van catches fire - hey, it happens!

The Gain knob starts with a dirty boost that then spans through saturated drive, spitting distortion, and a blistering fuzz tone. Get ready for your sound to be cranked up to infinity-and-a-half and captured on tape by the most incredible recording engineer you've ever heard - only there's no engineer and no studio. Just you, your guitar, your amp and the Germanium Filter.

Controls

Filter: Controls the frequency response of the pedal, featuring huge low end, scooped mids, and sharp, piercing highs.

Gain: Sweeps from mild overdrive to blasted-out fuzz. Very interactive with your guitar's volume control.

Volume (internal): Controls the overall output level of the pedal.

Specifications

Dimensions: 5" x 2.5" x 2.25" (including hardware).

Weight: 10.6 oz

Power: 9V (runs on standard 2.1mm negative center 9V adapter or included 9V battery).

Current Draw: 5 mA.

Notes: Welcome to the DROID X7 expander. The X7 gives you USB and MIDI connectivity for your master and also four gate outputs with modular levels.

You can process incoming and generate outgoing MIDI streams, both via classical DIN cables and via USB. Both the in and the out direction support polyphony with eight or even more voices in parallel.

For size reasons the X7 uses 3.5 mm TRS jacks for MIDI instead of the classical DIN jacks. But it comes with two DIN to TRS adapters, so you are free to use either form factor.

As a bonus feature, the X7 provides super fast loading of DROID patches via USB - without any need for putting the SD card in and out anymore.

Here are some examples of what you can do with the X7:

Attach an external keyboard to your modular.
Use an external hardware sequencer for playing melodies and beats in your modular.
Use an external MIDI controller to influence your DROID patch.
Do the same with a MIDI controller app on your tablet or phone (via USB).
Use your modular for playing polyphonic music and beats on your hardware synths or software synth plugins in your DAW, tablet or phone.
Connect two DROIDs (both with X7) and exchange real time CVs and triggers.
Use the four additional gate outputs on the X7 for sending clocks, gates and triggers and free your valuable CV outputs for other things.
Access the SD card in your master just like a USB stick for direct access to it via your PC, Mac, phone or tablet.
Alternatively load new patches to your master via MIDI sysex from your PC - and get your new patch ideas up and running in less than a second.

Dimensions
4 HP
23 mm deep

Current Draw
94 mA +12V
0 mA -12V
0 mA 5V

Notes: Moonwalker is a versatile signal generator that performs as an envelope, lfo, and audio oscillator, with attack and decay time controls

Phase offset is continuously variable from 0 to 360° and inverts the waveform without changing it’s amplitude, and with or without changing it's polarity.

Unipolar mode preserves the output range by offsetting the starting voltage, so it always stays between 0 and +10v

Bipolar mode preserves the starting voltage by offsetting the output range, so it always starts at 0v. The output range will shift from +unipolar, through +bipolar, to -unipolar, through -bipolar back to +unipolar.

The reference waveform does not change phase, but the timing of the rate change between Attack and Decay shift with the phase offset, to ensure synchronous movement.

The phase offset output is half-normalled to the phase offset cv input and skews the waveform from triangle to saw or ramp without changing frequency (when attack = decay).

Dimensions
10 HP
39 mm deep

Current Draw
110 mA +12V
80 mA -12V
0 mA 5V

Notes: Instantly create matching harmonies to what you play.

The EHX Intelligent Harmony Machine instantly creates matching harmonies to what you play. It's like having one - or even two - guitarists jamming with you at the same time and always in perfect sync. The Intelligent Harmony Machine opens a door to the music of great multi-lead guitar bands and multi-part harmonized solos. Plus, its ability to apply harmonies ranging from simple to sophisticated will totally transform what you play. Of course, it also boasts EHX's renowned impeccable tracking and genuine musical tone.

Select your key and the Intelligent Harmony Machines will generate single note, diatonic harmonies* with a huge range of choices that includes both two- and three-part harmonies. Here are your choices:

1: 6th Down
2: Perfect 4th Down
3: 3rd Down
4: 3rd Up
5: Perfect 4th Up
6: Perfect 5th Up
7: 6th Up
8: 7th Up
9: 3rd Up + 5th Up
10: 3rd Up + 7th Up
11: Perfect 5th Up + Octave Up

These sound so cool that EHX have included them as extra options for the multi-harmony parts (selections 9, 10 and 11) to give you even more choices:

9 optional: 4th Down + 3rd Up
10 optional: 3rd Up + 6th Up
11 optional: Octave Down + 5th Up
9 optional: 6th Down + 4th Down
10 optional: 3rd Down + 3rd Up
11 optional: Octave Down + 4th Down
The Intelligent Harmony Machine also performs perfect polyphonic pitch shifts so the pitch shifts you dial up are applied to chords as well as single notes. We've even included a Major/Minor switch so you can select whether 2nds and 3rds will be major or minor. Here are the interval selections that are available:

1: Doubler
2: Perfect 4th Down
3: 3rd Down (minor on major)
4: 3rd Up (minor or major)
5: Perfect 4th Up
6: Perfect 5th Up
7: 2nd Down (minor or major)
8: 2nd Up (minor or major)
9: Octave Down
10: Octave Up
11: Perfect 5th Up + Octave Up

The Intelligent Harmony Machine's Moment Mode lets you instantly change pitch by simply depressing the pedal's footswitch. The pitch shift is engaged as long as you hold down the F/S. There's also an option so you can apply a user-set sweep time between dry and effect. Choose instant pitch changes or control the time it takes for the Intelligent Harmony Machine to sweep up and down between the set interval and the dry signal!

EHX Founder, Mike Matthews said: "We designed the Intelligent Harmony Machine for the player who craves maximum power, but in a minimal footprint. You'll dig its sweet, musical tone and spotless tracking!"

*Diatonic harmony means notes within a specific key that relate to each other.

Compact harmony generating, pitch-shifting powerhouse
Impeccable tracking and superb musical tone
Two distinct modes: Intelligent Harmony and Polyphonic.
Intelligent Harmony Mode generates diatonic harmonies in a set key based on the single notes you play. Key Selector and #/- switches provide access to all 12 keys.
In Polyphonic Override Mode you can play single notes and chords. The IHM's 11-position Interval Selector switch lets you select the harmony.
In Momentary Mode the effect is only active when the footswitch is depressed. Choose from instant shifts or set the time it takes the signal to sweep up and down.
Mix control sets the mix between your dry and shifted signals. Dry output adds signal routing and control options and flexibility
Comes equipped with an EHX 9 Volt power supply, can also run on 9 Volt battery

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included (optional 9V battery not included)
Dimensions (in): 4.5 x 2.75 x 2.1
Current Draw: 26mA
Year Released: 2021

Notes: Five-channel mixer with mutes, built-in VCA, switchable overdrive and LED level meter. Simple, straightforward, high-quality stuff from AJH.

Supplier's Notes:
The MiniMod Muting Mixer & VCA is a 10HP wide, five channel audio mixer with many useful features. It is available with either a black (Dark Edition), or a silver front panel.

The mixer section has five input channels, and each channel includes a bi-colour tactile LED switch that can instantly mute or un-mute the channel, replicating the oscillator on/off switches on the original Model D synthesiser. This arrangement is more convenient than regular switches as each illuminated switch shows the on/off status of the associated channel and multiple buttons can be pressed at once, making it very useful for live performance.

AJH have also included a four segment LED level meter so that the overall level can be seen at a glance and adjusted to prevent the output from getting too "hot" and causing distortion in other modules further downstream.

It also features a VCA that is integrated into the output section, and this can be switched from linear to exponential response - this allows it to be used as a voltage controlled sub mixer or as a stand alone VCA with five inputs.

Lastly, AJH added a wonderfully soft and warm sounding overdrive circuit that can be switched in to add smooth, tube like distortion. This works in a similar fashion to a master volume guitar amplifier, so the amount of overdrive can be varied widely with different settings of channel and master output levels.

Module Width: 10hp
Module Depth: 26mm (Including power lead)
Current Usage: 55mA Positive, 25mA Negative

Notes: The Bitmap is a bitcrusher with fractional bit reduction and sample rate modulation. The Bitmap 2 adds waveshaping, wavefolding, and a window comparator for extreme digital distortion. A drive control handles everything from single coil guitars to synthesizers, with +8 dBu maximum signal level and enough gain to sound like an overdriven mixer channel. Modulation and envelope control create dynamic, responsive distortion and digital artifacts.

The Bitmap 2 is tuned to provide maximum sustain without sputtering on staccato notes. Less extreme settings add layers of nonlinearities that interact in subtle ways, giving you the warmth and grit of 8- and 12-bit samplers. Sample rate reduction turns your guitar into 8-bit video game sounds or twists scales into inharmonic melodies. Sample rate modulation adds subtle motion or morphs your guitar into entirely new textures.

The Bitmap works with guitar, bass, synthesizers, drum machines, and other instruments or line level sources.

Size:3.05" x 4.75" x 2.5"
Input impedance:1 MO
Output impedance:< 1 kO
Bypass: analog buffered
Power: 9 VDC, center negative
Current: 250 mA

Notes: Second-gen Immerse offers true studio-quality stereo reverb in a compact pedal format. Eight high-quality algorithms with simple, user-friendly controls and top quality sound. Lush.

Supplier's Notes:
The Immerse Mk II raises the bar with eight rich stereo reverbs in one easy to use pedal. No user manual required. Experience studio-quality tone that can be used with instruments of all stripes.

Five controls:

Effect Select
Mix, from 100% dry to 100% wet
Reverb Depth
Tone / Echo Time / Hold Time (depending on effect)
Pre-Delay / Modulation / Blend (depending on effect)

Specifications:

Electrical

Input level: instrument / consumer line level
Input impedance: > 1 MO
Gain: unity
Frequency response: 20 Hz - 20 kHz
Total harmonic distortion: < 0.005%
Signal-to-noise ratio: > 107 dBA

Power

Input: 9-12 V DC, 80 mA
Connector: center-negative, 5.5 mm OD x 2.1 mm ID

Physical
Dimensions: 2.9" x 4.6" x 2.0" / 73 mm x 117 mm x 51 mm
Weight: 8.84 oz / 251 g

Notes: Designed with mixing and mastering in mind, Sennheiser's HD400 Pros are a competitively priced pair of open-backed headphones with excellent clarity and fatigueless sound.

Supplier's Notes:
It's all in the mix.

When working at home or in the studio, you need your mix to sound as it does when your listeners hear it. The HD 400 PRO reference headphones are your everyday tool to get the job done. Its open-back design provides a natural and accurate listening experience for fine tuning your signature sound. The core of the HD 400 PRO is the 120 ohm transducer developed by Sennheiser engineers, featuring a specialized polymer blend in its diaphragm. The drive magnet offers high power while its damping system manages ventilation - this combination yields deeper bass while mitigating the distortion that otherwise impacts clarity - a difference our professional users will appreciate. This makes the HD 400 PRO a precise monitoring tool which reveals your mix in every detail. Velour earpads and a distinct lightweight design provide the comfort you need during long sessions. The robust housing endures everyday wear and tear regardless of your application, whether editing, mixing or mastering. A single-sided and coiled cable gives you the freedom to operate. For convenience, a straight cable is also included in the delivery. In addition, open ear cups and angled transducers allow for a wide and transparent soundstage, recreating the optimal listening position found in high-end recording studios. Artifacts of a confined space are a thing of the past. The HD 400 PRO is a true reliable companion for those who put quality and precision above all else.

Specifications:

Acoustic principle dynamic, open
Ear coupling circumoral
Ear pad material Velour
Jack plug 3.5 mm jack plug with 6.3 mm adapter
Impedance: 120 O
Frequency response: 6 Hz to 38 kHz (-10 dB)
Sound pressure level: (SPL) 110 dB (1 kHz / 1 V RMS)
THD (total harmonic distortion): < 0.05 % (1 kHz / 90 dB SPL)
Weight (w/o cable): 240 g
Temperature
Operation:
Storage:
-15 -C to +55 -C (5 -F to 131 -F)
-55 -C to +70 -C (-67 -F to 158 -F)
Relative humidity = 90 %

Included in the box:

HD 400 PRO Studio Reference Headphone
3 m coiled cable with 3.5 mm jack plug
3.5 mm jack plug to 6.3 mm adapter
1.8 m straight cable
Quick Guide
Safety Guide

Notes: Echolution 3 is a multi-tap stereo modulation delay offering a myriad of sound design options including reverse, jump, pong, modulation tempo sync, variable low pass filter, flexible signal routing and comprehensive MIDI control. Delay times ranging from 100ms to 5 seconds can be dialed in using the Time knob or via Tap Tempo using the left footswitch. A second delay tap can be set to the same length or a fraction of the main delay time to create rhythmic echoes. The ¾ fraction creates a dotted eight note delay, while the Golden fraction uses the sacred geometry of the Golden Ratio (.382) as the multiplier for the second tap. The multi-tap settings can be even further enhanced by the stereo ping pong effect, which causes the different delay taps to switch sides on each repeat. Store up to 4 presets, unlock hidden features with the Universal Remote footswitch, and design yet unheard delay lines. Runs on standard 9VDC.

KNOB-BY-KNOB
Time: Sets the length of the delay line. Overrides tap tempo and vice versa. Select sub-divisions with the small push button. Can activate any two sub-divisions at once.

Mix: Sets the volume level of the delay signal.

Repeats: Sets the amount of regeneration in the delay line.

Mod: Select and set the modulation Speed, Depth, and Tone. Hold push button to sync Speed to tap tempo.

Preset Select: Push to toggle through presets, press and hold to select. To save a preset after making changes, press and hold. Presets can be toggled and selected using only footswitches (see manual).

Special FX: Reverse makes the delay line go backwards. Jump makes the delay line jump up one octave. Pong (activated with a push and hold) causes echoes to alternate between the left and right channels, meant to be used in stereo.

BREAK RULES AND BUILD WORLDS
Designed to offer a streamlined user experience and a massive feature set, Echolution 3 is a worldbuilder. In a compact package, "E3" offers multi-tap delay lines, with sound design FX options ranging from the subtly cinematic to the outlandishly dramatic. I/O options include stereo output, MIDI sync, and additional footswitch features. On board presets make revisiting your favorite corners of the Echolution 3 universe simple.

HOW TO DISAPPEAR COMPLETELY
Marvin has come across Echolutions in the Pigtronix universe beforeibut never quite like this. Echolution 3 is a supermassive black hole leading to a vivid dimension stuffed with color, light, and the unexplainable, causing the voyager to lose his or herself more deeply than they knew was possible. In this dimension, the imagination tends to expand: familiar figures appear in cloud formations, meteorites can be sat on like bean bag chairs, and ropes of light can be swung on like vines.

MODEL ECHOLUTION 3

MODEL NAME: Echolution 3
SKU: E3
FUNCTION: Stereo Multi-Tap Delay
CATEGORY 1: Delay
CATEGORY 2: Modulation
EXPRESSION: TRS Remote / MIDI
BYPASS: Buffered

ELECTRONICS
VOLTAGE: 9VDC
CURRENT DRAW: 100mA
INPUT IMPEDANCE: High
OUTPUT IMPEDANCE: 1k

BODY
LENGTH (IN): 3.25
WIDTH (IN): 4.5
HEIGHT (IN): 2.2
WEIGHT (LBS): 1