100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Home  All Genres  

Search dance music

Options
Items 1 to 50 of 147 on page 1 of 3
1  2  3  »
Cat: 569573 Rel: 23 Sep 15
 
Liquid filter Eurorack synth module
Notes: Ripples delivers a classic, big-sounding analog four-pole filter in a small 8-HP package, continuing Mutable Instruments' lineage of warm and tasty filters started by the Shruthi SMR4 mkII and 4-Pole Mission.

3 filter modes are available: 2-pole band-pass, 2-pole low-pass, and 4-pole low-pass.

Self-oscillation is available for all modes and produces a clean sine-wave on the LP4 output. Unlike many classic 4-pole designs, this filter does not suffer from "loudness drop" when resonance is increased. The resonance loudness compensation circuit brings a slight tone coloration reminiscent of the Roland SH/Jupiter filters, with a very round and "liquid" resonance.

The 4-pole low-pass output is additionally sent to a VCA. This makes Ripples a good "final stage" module for an inexpensive/space-constrained subtractive synthesis synth voice.

*For audio samples, please visit - http://mutable-instruments.net/modules/ripples
Read more
 2 in stock $147.13
Click for better price!
or call +44 20 7424 1960
quote 569573
Cat: 671740 Rel: 04 Dec 17
 
Dual voltage control amplifier & overdrive - 6HP
Notes: Tallin is a dual voltage controlled amplifier (VCA) with overdrive, offering some unusual control features and a range of attractive tonal characteristics. Each of the two identical channels offers two simultaneously available inputs for voltage control over signal attenuation or gain, with linear and exponential response to CV. Volume control knobs offer manual gain settings ranging from fully closed (-80dB) up to +18dB. A colour LED indicator displays output signal levels. A soft-clip circuit avoids harsh clipping distortion, while a switchable overdrive circuit offers two carefully crafted distortion responses, simulating the sound of classic tube amplifiers.

Since both CV inputs are simultaneously active, they can be jointly exploited within patches featuring more complex volume control that otherwise would require using two traditional VCAs in series. As the signal path is DC-coupled, Tallin can also be used for handling the control voltages.
Read more
 3 in stock $134.27
Cat: 686654 Rel: 30 Apr 18
 
Dual drum/sampler module with 64 samples, pitch, decay & volume control
Notes: Erica "Pico DRUMS" module gives you two independent great sounding drums with versatile control over several parameters and extensive collection of drum samples. Chain up several Pico Drums and get one of the smallest modular drum setup in the modular world!

You can also upload your own drums (samples) on it using the programmer device.
Read more
 2 in stock $124.49
Cat: 616166 Rel: 09 Jun 16
 
Quad VCA & mixer synth module - 12HP wide
Notes: VCAs are the cornerstones of modular patches: shaping the amplitude or timbre of a tone with an envelope, animating a mixture of several oscillators, controlling the amount of filter modulation with a random source or a touch controller, applying an envelope on the linear FM signal hitting an oscillator... are all possible uses of these super versatile building blocks. That's why you never have enough of them.

What about four more?
Veils provides four VCAs with an adjustable response curve. Veils' outputs are daisy-chained, allowing adjacent groups of 2, 3, or all 4 channels, to be mixed together.
Read more
 6 in stock $148.15
Cat: 684450 Rel: 18 Jul 18
 
Dual ADSR envelope generator - 8HP
Notes: Module A-140-2 contains two ADSR type envelope generators behind a front panel with 8 HP only.

Each ADSR provides these controls and in/outputs:

- LED (displays the envelope output)
- A: manual Attack control
- D: manual Decay control
- S: manual Sustain control
- R: manual Release control
- Gate Input
- Retrigger Input
- CVT Input with attenuator (CVT = CV Time)
- Envelope Output 1
- Envelope Output 2

The output voltage range for each envelope is 0 - 10V. The time range of Attack/Decay/Release is about 1ms to 30s.

By means of internal jumpers one can select which time parameters are controlled by the CVT input (e.g. D only or D+R or A+D+R) and in which direction (i.e. if an increasing CVT shortens or stretches the time parameter in question).

Socket CVT can be normalled to an internal fixed voltage (i.e. the switching contact is connected to an internal fixed voltage). That way it's possible to change all time parameters simultaneously by means of the CVT control.

Another jumper is used to set output 2 to normal or inverted envelope.

And another jumper is used for the normalling of Gate 2 to Gate 1 (i.e. ADSR#2 is also triggered by Gate 1).

Two more jumpers are used for the optional bus access to the gate signal of the bus for each ADSR. Changing the positions of the mentioned jumpers allows to modify the factory settings.
Read more
 5 in stock $120.37
Click for better price!
or call +44 20 7424 1960
quote 684450
Cat: 589506 Rel: 09 Dec 15
 
Power solution for eurorack systems - 40W
Notes: Row Power is a clean, regulated, and protected power solution for eurorack systems. Row Power 40 provides 40W of power, suited for up to two typical eurorack rows:

+12V @ 1.5A
-12V @ 1.3A
+5V @ 1.5A

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Daisy-chain multiple Row Powers to use a single power brick for multiple rows (typically 3-5 rows per power brick). Each row will be independently regulated and protected for ultra-low cross-talk between rows. Rows can also be hot-swapped (plugged/unplugged without powering the whole system down).
Read more
MRP:$175.33 SAVE 23%
 1 in stock $134.79
2hp
Cat: 686020 Rel: 04 May 18
 
Versatile hi hat with six oscillator architecture
Notes: Hat is a hi-hat cymbal with a wild side. Finding something unique is easy with a blend of sounds ranging from robotic to metallic. At its core are three unique sound sources made up of six oscillators, a noise generator, and a number of filters. Sizzle affects each source independently, adjusting oscillator and filter frequencies, allowing for a broad range of sounds. In addition, separate trigger inputs for open and closed allow for a complete hi-hat pattern on a single module. No matter what situation it's in, Hat provides shimmering, metallic timbres for any percussive purpose.
Read more
MRP:$146.93 SAVE 24%
 1 in stock $112.15
Cat: 716763 Rel: 14 Feb 19
 
Stereo mixer - 6HP
Notes: Stmix is a compact 4 channel stereo mixer with an Auxilliar input. This input will allow us to chain a few of them or to insert an extra fifth input.

This module is compatible with our Hexmix system, and can be internally connected to hexmix module to add the output of STMIX to your main mix.
Read more
MRP:$166.68 SAVE 21%
 8 in stock $131.69
Click for better price!
or call +44 20 7424 1960
quote 716763
Cat: 686670 Rel: 27 Apr 18
 
8 great sounding custom stereo effects in just 3HP
Notes: Pico DSP is a small brother of the popular stereo effects processor Black Hole DSP. It contains eight algorithms, in detail four delays, two types of reverb, Leslie speaker emulation and an Overdrive/Bitcrusher. Each effect is editable in two parameters. One of them can be modulated using the CV input. Pico DSP features clear, high-resolution sound. Alongside the established standards, it is also possible to generate lots of freaky special effects.
Read more
 3 in stock $124.49
Cat: 676567 Rel: 03 Apr 18
 
Multi-mode CV generator - 4HP
Notes: Clep Diaz is a handy and small step CV and LFO generator. In step and random modes, use the encoder to control the number of steps in the sequence; in LFO mode, the encoder controls the amplitude of the wave. Toggle the directionality of the sequence: up, down, or up/down to customize the CVs further. CD also gives CV control over the number of steps in the sequence and an end-of-cycle trigger output. Unipolar and bipolar outputs allow maximal control.
Read more
MRP:$140.76 SAVE 22%
 1 in stock $110.10
Click for better price!
or call +44 20 7424 1960
quote 676567
Cat: 765963 Rel: 24 Feb 20
 
three-channel switch module
Notes: SL3KT (pronounced "Select") is a simple three-channel switch module for Eurorack Modular Synthesizers.
Three independent, two-way switches allow for users two select between different sources or destinations of both CV and Audio Signals. Useful for many tasks in a Eurorack system such as sequence selecting, CV selecting, boolean logic operations, group switching, group routing, gating, waveform mixing, and so much more!
Read more
MRP:$159.28 SAVE 20%
 1 in stock $127.58
Click for better price!
or call +44 20 7424 1960
quote 765963
Cat: 734888 Rel: 22 Oct 19
 
6HP function generator
Notes: Airstreamer is a function generator with AD, ASR and loop mode. The curves can be altered in shape. A 1V/octave input makes it possible to play the module like an oscillator.

- Fast and effective envelope generator with variable slope curves and three modes: looping, attack-sustain-release (ASR) and attack-decay (AD)
- 320 khz samplerate, zero aliasing CV generation
- 1v/oct input, bipolar and unipolar outputs, selectable end of cycle outputs
- Thru-zero VCA input that inverts the envelope when CV goes to negative voltages
Read more
 2 in stock $137.87
Cat: 563716 Rel: 10 Mar 15
 
Voltage controlled filter synth module with low pass (LPF) 2-pole, high pass (HPF) 2-pole and bandpass outputs (BPF) 1-pole
Notes: Introducing the uVCF state variable filter.

This is another great David Dixon filter design that has been on the workbench for a while. It is a very clean and precise filter that also doubles as an excellent sine VCO.

It responds very well to FM and the small size should make it a nice choice for smaller systems/lunchboxes.
Read more
 2 in stock $139.93
Cat: 590918 Rel: 26 Oct 15
 
Dual Low Pass Gate synthesiser module - 4HP wide
Notes: The LxD, Low Strike Duo, is a dual-response, two channel, direct-coupled, Low Pass Gate, which utilizes vactrols in order to provide simultaneous control over the Amplitude and Frequency Spectrum of an Input Signal.

It is, in essence, a VCFA (Voltage Controlled Filter Amplifier). Unlike the Optomix, the LxD offers two different filter responses. CH. 1 offers a 12db/ Octave response that is mildly-resonant, while CH. 2 offers a 6bd/ Octave that is non-resonant.

The Output of CH. 1 is normalled to the input of CH. 2. This normalization puts the two channels in series, which is similar to the VCF into VCA arrangement made popular by many monosynths of the 1970's.
Read more
 3 in stock $103.92
Cat: 692512 Rel: 18 Jun 18
 
Basic voltage-controlled oscillator for the A-100 modular system
Notes: Module A-110-2 is a low-cost voltage-controlled oscillator. It's a slightly reduced version of the standard VCO A-110-1. Compared to the A-110-1, the A-110-2 has no sine output and the (expensive) octave rotary switch is replaced by a 3-position toggle switch. In return, the A-110-2 is equipped with an additional linear FM input and a soft sync input. A jumper is used to select the range of the tune control between about 1/2 octave and about 4 octaves. The width of the module is only 8 HP compared to the 10 HP of the A-110-1.

All other features are essentially the same as for the A-110-1.

Explanation of the jumpers and trimming potentiometers:

- JP2: CV connection to A-100 bus
- JP3: range of Tune control (installed = about 4 octaves, not installed = about 1/2 octave)
- JP4: AC/DC coupling of the linear FM input (installed = DC coupling, not installed = AC coupling)
- P5: 1V/Oct scale
- P6: frequency offset
- P7: high-end trim
- P8: adjustment +1 Oct. range switch
- P9: adjustment -1 Oct. range switch
- P10: temperature VCO heater

The core of the A-110-2 is - like the A-110-1 - a sawtooth oscillator (in contrast to the A-111-1, which is based on a triangle oscillator). The other waveforms are derived from the sawtooth by waveform converters. As the sawtooth reset (i.e. the back-to-zero slope) is not infinitely fast but takes a little bit of time the triangle is not perfect! At the bottom of the waveform it has a small glitch or notch that is caused by the sawtooth reset and cannot be eliminated by the waveform converter. If a perfect triangle is required, the A-111-1 is recommended.

The sawtooth output of the A-110-21 has a falling (or negative) slope. The front panel shows erroneously a rising (or positive) slope. This has no influence on the sound but becomes important when the module is used as an LFO or is mixed with the sawtooth output of another VCO.

The control voltage applied to the socket 1V/Oct is added to the control voltage coming from the bus (interruptible by removing the jumper JP2). Connecting a cable to the socket 1V/Oct does not interrupt the bus CV connection!
Read more
 1 in stock $109.06
2hp
Cat: 727389 Rel: 02 Oct 19
 
Digital oscillator module with sub output & wavefolding - black
Notes: Sine is a harmonically pure VCO with two distinct outputs.

The primary output contains a perfect sine wave with a wide frequency range and pristine volt per octave tracking. The Sub output features two sine tones that can be blended together to achieve a mix of one octave below, or a fifth above the primary output's frequency.

In addition, both outputs have an internal wavefolder that adds harmonic content to the signal allowing for spectrally complex tones within a single module. Keep your tones pure (or not!) with Sine.
Read more
MRP:$169.15 SAVE 20%
 1 in stock $134.79
Click for better price!
or call +44 20 7424 1960
quote 727389
Cat: 734880 Rel: 10 Jul 19
 
Envelope module with two ADSR voltage controlled enevelope generators - 8HP
Notes: The module contains two ADSR type voltage controlled envelope generators with exponential curve shapes (charge/discharge curves of a capacitor) behind a front panel with 8 HP only.

Each ADSR provides these controls and in/outputs:

- LED (displays the envelope output)
- A: manual Attack control
- D: manual Decay control
- S: manual Sustain control
- R: manual Release control
- Gate Input
- Retrigger Input
- CVT Input with attenuator (CVT = CV Time)
- Envelope Output 1
- Envelope Output 2

The output voltage range for each envelope is 0 - 10V (10V = attack peak).

The time range of Attack/Decay/Release is about 1ms to 30s.

By means of internal jumpers one can select which time parameters are controlled by the CVT input (e.g. D only or D+R or A+D+R) and in which direction (i.e. if an increasing CVT shortens or stretches the time parameter in question).

Socket CVT can be normalled to an internal fixed voltage (i.e. the switching contact is connected to an internal fixed voltage). That way it's possible to change all time parameters simultaneously by means of the CVT control.

Another jumper is used to set output 2 to normal or inverted envelope.

And another jumper is used for the normalling of Gate 2 to Gate 1 (i.e. ADSR#2 is also triggered by Gate 1).

Two more jumpers are used for the optional bus access to the gate signal of the bus for each ADSR.
Read more
 3 in stock $129.63
Click for better price!
or call +44 20 7424 1960
quote 734880
Cat: 738636 Rel: 09 Jul 19
 
Simplistic quad LFO module with intuitive front panel - 14HP
Notes: Module A-143-3 is a low-cost four-fold modulation oscillator, often called LFO (low frequency oscillator). Like the other modules of the A-143 series (A-143-1 and A-143-2) not a very "exciting" module, just a bread-and-butter device and a simple demon for work. The module contains four simple LFOs. Each LFO is equipped with three waveform outputs: triangle, rectangle and rising sawtooth. The frequency of the sawtooth output is twice the frequency of the other outputs. A three-way switch is used to select one of three frequency ranges mid-low-high, spanning from about two cycles per minute at the lowest, to moderate audio frequency at the highest (about 5 kHz).

If other waveforms or additional LFO features are required (e.g. reset input, adjustable waveform, voltage controlled frequency) the LFO modules A-145, A-146 and A-147 are available.
Read more
 2 in stock $109.06
Click for better price!
or call +44 20 7424 1960
quote 738636
Cat: 714704 Rel: 22 Jan 19
 
Compact voltage-controlled four-channel audio mixer - 8HP
Notes: A-135-2 is a miniature version of the A-135-1. Behind a front panel with 8 HP only four linear VCAs (voltage controlled amplifiers) and a voltage controlled mixer based on the VCAs are available.

Controls, In/Outputs and Functions of each VCA:

- Level (manual control of the VCA amplification), small rubberized knob (L1...L4)
- Control voltage input with associated attenuator (CV1...CV4), for the full VCA control range about 0...+5V control voltage are required (attenuator fully clockwise), for higher control voltages the attenuator is used, the attenuators are without knobs, just plastic shafts with white marker
- Signal Input
- Signal Output
- All inputs and outputs are DC coupled. Consequently the VCAs can be used to process both audio and control voltages (e.g. to control the level of LFOs or envelopes)
- The signal input is not equipped with an attenuator. But the VCAs can process all signals up to 15Vpp / -7.5...+7.5V without clipping. In case of higher levels an external attenuator is required (e.g. A-183-1).
- The available amplification range is 0...1, the maximal amplification is 1 (i.e. it "clips" and remains at 1 even if the control voltage goes beyond the value that corresponds to amplification 1)

Functions of the voltage controlled mixers:

- Two outputs ("Selected" and "All")
- Selected output: the ouput if a VCA is removed from this sum signal when a plug is inserted into the corresponding VCA output.
- All output: sum of all VCA outputs, regardless of inserted plugs into the VCA outputs
- The maximal amplification is about 0.6 to avoid clipping at the mixer outputs (otherwise the outputs may distort with 15Vpp signals at each signal input and full amplifications)

Special functions of the voltage controlled mixers (selectable by internal jumpers):

- Dual Stereo VCA: In this case the control unit of VCA1 (L1 + CV1) affects also VCA3 and the control unit of VCA2 (L2 + CV2) affects also VCA4, the control units of VCA2 and VCA4 are out of operation
- Quad VCA: In this case the control unit of VCA1 (L1 + CV1) affects all four VCAs. The control units of VCA2, VCA3 and VCA4 are out of operation. In this mode the module has the same function as module A-132-2. That's why module A-132-2 will be discontinued.
- Normalling of the signal inputs: by means of internal jumpers signal input 1 can be normalled to signal input 2, signal input 2 to signal input 3 and signal input 3 to signal input In 4. That way the same input signal can be distributed to four different channels by means of control voltages (e.g. quadrophonic distribution of audio signals). Suitable control voltage sources are e.g. A-144 (Morphing Controller) or A-143-9 (Quadrature LFO).
Read more
 1 in stock $102.89
Tiptop Audio Happy Ending Kit (silver) (modular synth starter kit)
Cat: 590438 Rel: 10 Nov 15
 
Modular starter kit containing rails, rack ears and power supply
Notes: The Happy Ending Kit is an easy way to get everything needed to start a Eurorack modular system.

The Happy Ending Kit includes:
1 x Z-Rails set plus screws to attach to Z-Ears
1 x uZeus 4HP PSU with 2 x flying bus boards
1 x UK 3-pin mains adapter
Read more
 1 in stock $141.99
Cat: 704130 Rel: 01 Oct 18
 
Multimode filter based on the Steiner-Parker design - 8HP
Notes: Welcome to the Forbidden Planet, an all analogue multi-mode filter design influenced by the 1975 Steiner-Parker Synthacon model. Control the Forbidden Planet manually or through CV and take the sound of your Eurorack into new orbits.

Forbidden Planet has three filter input jacks: High Pass, Low Pass and Band Pass. The High Pass section is this module's signature sound - a crisp sharp-cut with no residue, designed to add High Pass filtering capability to Tiptop Audio's wide range of Eurorack modules. Send a throbbing kick drum through the High Pass section and filter out the rumbling lows while maintaining the pulse of the beat. The Bandpass is clear and useful in isolating a pie-slice-range-of-frequencies while cutting off the low and highs, great for accurate sound design or sculpting audio into that sweet spot. The Low Pass is an airy classic 12db two-pole analogue slope ideal for monophonic synth patches and filtering down to the essential low-end bass we all love.

The Forbidden Planet Resonance utilizes an internal feedback path which can sound smooth or aggressive depending on the knob setting. At a low setting, it emphasizes the cut-off harmonics, at middle settings it begins to self-oscillate, and towards maximum setting it forms interesting tones and all sorts of chopped grainy bits of self-oscillation perfect for entering into a sci-fi world.

The Forbidden Planet is an impressive multi-mode analogue filter which adds a broader filter spectrum to the Tiptop Audio modular family and unlocks forbidden creative possibilities in a small package.
Read more
 1 in stock $111.11
Click for better price!
or call +44 20 7424 1960
quote 704130
Cat: 717728 Rel: 25 Jan 19
 
Precision calibrated analogue VCA - 4HP
Notes: The Tiptop Audio VCA is a full featured, precision calibrated, analogue Voltage Controlled Amplifier. At its heart is a novel design of a control circuitry - a function that lets you sweep continuously through three different response curves: Logarithmic, Linear, Exponential - giving you all three shapes in a single module. This special control circuitry design by Mr. Osamu Hoshuyama was adopted into the VCA module to make it a great sounding synthesizer VCA with flexibility to address all duties: level control for both audio and CV modulation, gating audio into silence, and amplitude modulation effects.

A VCA, Voltage Controlled Amplifier, sometimes referred to as an audio gate, is an essential module to any Eurorack and no system is complete without one. The concept is an input, an output and a control that sets how much of the input signal passes through to the output.

A great VCA means minimum feedthrough of the control signal bleeding into the passing signal and minimum distortion applied to the passing signal. An excellent audio gate means minimal leakage of signal from IN to OUT when the control tells the VCA to fully close. These are the most critical conditions for a good sounding, good responding VCA and are what the Tiptop Audio design carefully addresses. 2 LED peak indicator lights on the front panel light up with incoming CV or audio signals. While a clipping indicator for audio is expected, clipping of CV is often overlooked and it's included here to visually maintain the full dynamic range of an envelope driving the VCA.

The Tiptop Audio VCA lets you concentrate on creative uses rather than figuring out the module's anomalies. The result is an excellent sounding synthesizer VCA that's a joy to use and pleasing to hear.
Read more
 1 in stock $104.41
Click for better price!
or call +44 20 7424 1960
quote 717728
Cat: 557490 Rel: 19 Dec 14
 
Synth module to be used for ring modulation, VCA, mixer, signal multiplication, voltage controlled polarization, attenuation and more
Notes: The modDemix features 2 identical direct-coupled balanced modulator circuits that may be used together or independently for Ring Modulation, VCA, Mixer, Signal Multiplication, Voltage Controlled Polarization, Attenuation and more.
Read more
 1 in stock $128.62
Cat: 698465 Rel: 15 Aug 18
 
Reverb effects module with spring reverb tank - 8HP
Notes: Module A-199 is a spring reverb module. The reverb effect is electronically simulated by means of 3 spiral springs. Spring reverb systems have a very characteristic sound that is based on the (insufficient) mechanical properties of the springs like signal delays, audio resonances, limited frequency range, acoustic feedback behaviour, sensitivity to mechanical shocks and others.

The 3-spring system used in the A-199 ensures a "dense" reverb because of the different properties of the three springs.

The A-199 implies some special features that are not self-evident for spring reverb units:

The reverb signal can be fed back to the input using the Feedback control. Even self-oscillation of the springs similar to the self-oscillation of filters is available. The feedback loop can lead even via external modules like VCA, VCF, phaser, frequency shifter, vocoder, distortion/waveshaper, ring modulator and others. In this case the reverb output of the A-199 is connected to the input of the external module(s) and the output of the external module(s) is fed back to the Ext. Feedback In socket of the A-199. This socket contains a switch that interrupts the internal feedback loop as soon as a plug is inserted.

Another feature is the Emphasis control. This enables the adjustment of the accentuation of middle frequencies (around ~ 2kHz).

With the Mix control the relation between original and reverb signal appearing at the mix output is adjusted.

Using all these features very extreme and unusual effects can be generated with the A-199.
Read more
 1 in stock $121.41
Click for better price!
or call +44 20 7424 1960
quote 698465
2hp
Cat: 675790 Rel: 26 Jan 18
 
Flexible kick drum synthesiser
Notes: Kick is a bass drum synthesizer with a dramatic timbral range. Its flexible synthesis engine ranges from 808 to IDM with its punchy kicks and smooth distorted tones. 1V/Octave tracking across five octaves allows for tonal sequencing of the entire frequency range. Drop a beat with Kick.
Read more
MRP:$146.93 SAVE 24%
 1 in stock $112.15
2hp
Cat: 675792 Rel: 26 Jan 18
 
Snare drum module featuring classic to esoteric snare sounds & blips
Notes: Snare goes from short blips to 909 hits and everywhere in between. More than just a typical snare sound, this module is a powerful sound design tool that encourages exploration. 1V/Octave tracking allows percussive melodies with atypical timbres, while snap dials in the texture of the metaphorical membrane. Hit the back beat with Snare.
Read more
 1 in stock $112.15
2hp
Cat: 680018 Rel: 12 Mar 18
 
Analog voltage controlled oscillator with CEM3340 based architecture
Notes: VCO is an analog voltage controlled oscillator based on the reissue of the legendary Curtis CEM3340 IC.

Many believe this chip to be the greatest sounding analog oscillator of all time. VCO features simultaneous triangle, sawtooth, and square wave outputs with linear FM, hard sync, and PWM capabilities. Accurate 1V/Oct tracking across 10+ octaves provides a huge frequency range for melodies or dramatic sweeps.

Add some analog warmth to your patches with VCO.
Read more
MRP:$146.93 SAVE 24%
 1 in stock $112.15
2hp
Cat: 686021 Rel: 04 May 18
 
Flexible kick drum synthesiser
Notes: Kick is a bass drum synthesizer with a dramatic timbral range. Its flexible synthesis engine ranges from 808 to IDM with its punchy kicks and smooth distorted tones. 1V/Octave tracking across five octaves allows for tonal sequencing of the entire frequency range. Drop a beat with Kick.
Read more
MRP:$146.93 SAVE 24%
 2 in stock $112.15
2hp
Cat: 686033 Rel: 04 May 18
 
Analog voltage controlled oscillator with CEM3340 based architecture
Notes: VCO is an analog voltage controlled oscillator based on the reissue of the legendary Curtis CEM3340 IC.

Many believe this chip to be the greatest sounding analog oscillator of all time. VCO features simultaneous triangle, sawtooth, and square wave outputs with linear FM, hard sync, and PWM capabilities. Accurate 1V/Oct tracking across 10+ octaves provides a huge frequency range for melodies or dramatic sweeps.

Add some analog warmth to your patches with VCO.
Read more
MRP:$146.93 SAVE 24%
 1 in stock $112.15
2hp
Cat: 686037 Rel: 04 May 18
 
Snare drum module featuring classic to esoteric snare sounds & blips
Notes: Snare goes from short blips to 909 hits and everywhere in between. More than just a typical snare sound, this module is a powerful sound design tool that encourages exploration. 1V/Octave tracking allows percussive melodies with atypical timbres, while snap dials in the texture of the metaphorical membrane. Hit the back beat with Snare.
Read more
MRP:$146.93 SAVE 24%
 1 in stock $112.15
Cat: 716930 Rel: 29 Jan 19
 
Voltage-controlled wave form multiplier - 14HP
Notes: A-137 is a voltage controlled Wave Multiplier. The basic idea of a wave multiplier is to multiply the waveform of an incoming signal (e.g. triangle/saw/sine from a VCO) within one period of the waveform. This leads to additional harmonics of the incoming signal. The period and consequently the pitch of the signals remains unchanged (in contrast to frequency multiplication e.g. with the PLL module A-196).

The A-137 works as a kind of "inverse low pass filter", i.e. it adds a lot of harmonics to a signal that contains none or only a few harmonics (e.g. sine or triangle waveform). In contrast to that a low pass filter (e.g. A-120) removes harmonics from a signal that contains a lot of harmonics (e.g. saw or rectangle waveform). Consequently the best results are obtained in combination with input signals poor in harmonics (e.g. sine or triangle). The A-137 can be used with signals rich in harmonics too (e.g. saw) but the effect is not as remarkable as for triangle or sine waves. For rectangle signals none or only little effects are obtained.

The A-137 is a very sophisticated wave multiplier that offers much more features, more controls and more waveform manipulations than other wave multipliers available so far. In addition all parameters are both manually adjusted and controlled by external voltages. These are the features of the module:

Controls:

- Input Level (to adjust the input level for best effect of the succeeding controls)
- Multiples (number of waveform multiplications, manual control)
- Harmonics (additional effect that adds more harmonics similar to the resonance/emphasis control of filters, manual control)
- Folding Level (controls upper and lower folding level, manual control)
- Symmetry (controls symmetry between upper and lower folding level, manual control)

Inputs/Outputs:

- Audio In (also suitable for control signals)
- Multiples CV In (with attenuator)
- Harmonics CV In (with attenuator)
- Folding Level CV In (with attenuator)
- Symmetry CV In (with attenuator)
- Audio Out (resp. processed control signal output)

The Multiples parameter (manual and ext. CV) defines the number of basic wave multiplications within one period. With the Folding Level and Symmetry parameter (both manual and ext. CV) the upper and lower clipping levels of the wave folder units are controlled. The Harmonics parameter (manual and ext. CV) adds some harmonic content by sharpening the waveform edges and adding overshoot peaks. It works a little bit like the resonance control of a VCF. The module is fully DC coupled, i.e. even control signal can be processed with the modules.
Read more
 1 in stock $109.06
Click for better price!
or call +44 20 7424 1960
quote 716930
Cat: 755414 Rel: 20 Nov 19
 
Two CV/Gate to MIDI/USB interfaces, each with a common 1V/Oct CV transpose input - 10HP
Notes: Module A-192-2 contains two independent CV/Gate-to-Midi/USB interfaces. For each of the two sub-units these inputs are available:

- Gate Input (min. +5V)
- CVN Input (defines the Midi note number), 1V/octave standard, range 0...+10V (i.e. 10 octaves)
- CVV Input (defines the velocity value assigned to the Midi note message), can be used alternatively for Midi volume (CC#7), range 0...+5V
- CVC Input (free assignable to any Midi control change number), range 0...+5V

For both sub-units a common CV Transpose input is available (1V/octave, range 0...+10V). The voltage applied to this input is added internally to CVN before the Midi note number is generated. It can be used e.g. to transpose two sequences simultaneously by one voltage.

How it works:

Whenever the rising edge of the Gate input is recognized a Midi note on message is generated. The note number corresponds to the sum of the voltages applied to the CVN input and the common CV Transpose Input that is present at the rising edge of the gate signal.
Read more
 2 in stock $113.17
Click for better price!
or call +44 20 7424 1960
quote 755414
Cat: 738619 Rel: 09 Jul 19
 
Voltage controlled envelope generator, standard edition - 14HP
Notes: The A-141-2 module is an ADSR envelope generator with voltage controlled attack, decay, sustain and release parameters. Other features include LFO functionality as well as digital end-of-attack and end-of-release outputs. Besides positive and inverted outputs there is an output with voltage controlled amplitude available.

Attack, Decay, Sustain and Release parameters of the A-141-2 can be adjusted manually as well as via control voltages. The CV inputs come equipped with attenuators. In addition, a Comm-CV socket was implemented. Control voltages fed to this input influence all time parameters (A, D and R) simultaneously. Thus, it is possible to make high pitched notes shorter and more percussive. - Just like the behaviour of many acoustic instruments. The time range of the envelope goes from 50 microseconds to six seconds. Using a toggle switch, it is possible to increase these values by a factor of ten (500 us to 60 s) or a factor of hundred (5 ms to 10 min). To activate the envelope, there are gate and retrigger inputs.

The A-141-2 is equipped with a normal and an inverted output. Both connectors work with a fixed level. Furthermore, there is a third, variable output. Here, before reaching the out socket, the envelope signal is fed to a voltage controlled VCA. - Perfect for velocity CV signals. A jumper on the circuit board allows you to choose between a unipolar and a bipolar mode of operation. Other jumpers make it possible to normalize the CV inputs.

Last but not least, there are two digital outputs called EOA and EOR, which emit a gate signal after the attack respectively release phase. This is useful for delayed triggering of other envelopes. By connecting EOA or EOR output to the gate input, you can make the A-141-2 oscillate like a LFO. Adjustments to the envelope times change the frequency and waveform. If you connect the Attack CV input to the inverted output or the Decay respectively Release CV input to the normal output, you can alter the curve characteristics.
Read more
! low stock $128.61
Click for better price!
or call +44 20 7424 1960
quote 738619
Cat: 671561 Rel: 18 Dec 17
 
Pair of multicore signal connectors
Notes: A-180-9 is another simple but useful tool. It can be used to connect up to 14 signals between different cases by means of standard network cables (RJ45). These cables are available all over world smoothly in different lengths and colours. From the factory two black network cables with 0.5 m length are enclosed.

The upper network connector is wired to the eight sockets 1-8, the lower to the six sockets A-F. That way it's possible to pre-patch different cases and connect signals, that are required in all cases (e.g. clock, start/stop, master CV) by means of one or two cables only instead of 14 individual patch cables. When only eight signals are required only the upper network connector is required and the sockets 1-8 are used. When more than eight signals have to be patched both network connectors have to be used. It's also possible to wire the upper and lower network to different cases (i.e. signals 1-8 to external case #1 and signals A-F to external case#2).

The module is fully passive (no power supply required) and simply wires the 14 sockets to 14 pins of the network connectors.

The A-180-9 comes in pairs for combining two modular systems.
Read more
 2 in stock $102.89
Cat: 577748 Rel: 15 Aug 18
 
Reverb effects module with spring reverb tank - 8HP
Notes: Module A-199 is a spring reverb module. The reverb effect is electronically simulated by means of 3 spiral springs. Spring reverb systems have a very characteristic sound that is based on the (insufficient) mechanical properties of the springs like signal delays, audio resonances, limited frequency range, acoustic feedback behaviour, sensitivity to mechanical shocks and others.

The 3-spring system used in the A-199 ensures a "dense" reverb because of the different properties of the three springs.

The A-199 implies some special features that are not self-evident for spring reverb units:

The reverb signal can be fed back to the input using the Feedback control. Even self-oscillation of the springs similar to the self-oscillation of filters is available. The feedback loop can lead even via external modules like VCA, VCF, phaser, frequency shifter, vocoder, distortion/waveshaper, ring modulator and others. In this case the reverb output of the A-199 is connected to the input of the external module(s) and the output of the external module(s) is fed back to the Ext. Feedback In socket of the A-199. This socket contains a switch that interrupts the internal feedback loop as soon as a plug is inserted.

Another feature is the Emphasis control. This enables the adjustment of the accentuation of middle frequencies (around ~ 2kHz).

With the Mix control the relation between original and reverb signal appearing at the mix output is adjusted.

Using all these features very extreme and unusual effects can be generated with the A-199.
Read more
 2 in stock $100.83
Cat: 745789 Rel: 10 Sep 19
 
Voltage-controlled clock multiplier with CV or manual control - 4HP
Notes: Module A-160-5 is a voltage controlled clock multiplier. The incoming clock signal (socket Clock In) is multiplied by a factor that depends upon the control voltage on socket CV In (0...+5V) and the position of the Mode switch. The multiplied clock signal is available at the socket Clock Out. According to the position of the Mode switch different clock multiplying factors are assigned to the control voltage. With 0V CV no clock output is generated. This state is indicated by "all LEDs off". With increasing CV integer factors (left position of the mode switch), power of two factors (middle position) or a mix of both (right position) are obtained. Nine LEDs are used to show the currently selected multiplying factor. In addition two LEDs are used to display the incoming and outgoing clock signal.

A manual control is used to adjust the clock multiplication factor manually without the need of an external control voltage. The voltage generated by this control ("Manual") is normalled to the CV In socket. As long as no plug is inserted into the CV In socket the clock multiplication factor is adjusted by means of the manual control knob and displayed by the LEDs. For dynamic applications (like the ratcheting function described below) the manually generated CV is overwritten by the external CV which has to be fed into the CV In socket.

The module can be used for all kind of clock multiplying applications. One important example is the generation of so-called ratcheting sequences. The band Tangerine Dream is famous for this kind of sequences. A normal sequencer generates only one gate signal per step. A ratcheting sequence may have also more than one gate pulses per step. This function can be obtained by using the A-160-5: one CV output of the sequencer is used to define the number of gate pulses per step. If the control of the step in question is fully CCW the generated CV is 0V and no gate signal is generated (mute of the step). When the control of the step in question is turned clockwise one, two or more gate pulses are generated depending upon the position of the mode switch and the voltage generated by the CV at this step.

Technical note: Due to the nature of clock multiplying it takes a few input clock pulses until the clock output is stable. One has to average a few input clock pulses to generate the multiplied clock output signal. Even when the input clock frequency changes it will take a few cycles until the output clock signal is correct as the module cannot foresee the future of the clock input signal. The generated clock output signal is derived from the last few cycles of the clock input signal. Consequently the module should be driven only by a clock signal with constant or slowly changing frequency.
Read more
 1 in stock $100.83
Click for better price!
or call +44 20 7424 1960
quote 745789
Cat: 707082 Rel: 23 Oct 18
 
Fixed filter bank with 15 parallel bandpass filters - 20HP
Notes: Module A-128 (Fixed Filter Bank) is a filter bank, made up of 15 parallel band pass filters, all with fixed middle frequencies and bandwidth (50 Hz / 75Hz / 110Hz / 150Hz / 220Hz / 350Hz / 500Hz / 750Hz / 1.1kHz / 1.6kHz / 2.2kHz / 3.6kHz / 5.2kHz / 7.5kHz / 11 kHz).

Each band pass filter has its own amplitude control knob, with which that frequency band can be attenuated. The bandwidth of each of the filters is approximately half an octave.

The signal at the output of the A-128 contains a mix of all the filters, depending on the position of each one's amplitude control knob.

The filter bank's main job is to emphasise individual sections of the whole audio frequency range.
Read more
 2 in stock $137.87
Click for better price!
or call +44 20 7424 1960
quote 707082
2hp
Cat: 652192 Rel: 06 Jun 17
 
Looper module for Eurorack synthesisers - 2HP
Notes: Freez is a voltage controlled locked looper. It captures moments of audio in buffers, where they can be minced and mangled beyond recognition. Once frozen, adjusting size will cause pitch and timbre changes to the locked audio.

Adjusting the sample rate control will distort and decimate the incoming audio as well as warp the time domain of the currently locked buffer. From beat repeat to granular audio buffer, Freez will create new sounds and textures out of any input signal.
Read more
MRP:$146.93 SAVE 26%
 1 in stock $108.04
Click for better price!
or call +44 20 7424 1960
quote 652192
Cat: 739048 Rel: 29 Jul 19
 
Eurorack power supply module - 4HP
Notes: Row Power is a clean, regulated, and protected power solution for eurorack systems. Row Power 35 provides 35W of power, suited for any typical eurorack row (84HP to 168HP):

+12V @ 1.4A
-12V @ 1.25A
+5V @ 1.0A

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Daisy-chain multiple Row Powers to use a single power brick for multiple rows (typically 3-5 rows per power brick). Each row will be independently regulated and protected for ultra-low cross-talk between rows. Rows can also be hot-swapped (plugged/unplugged without powering the whole system down).
Read more
MRP:$164.22 SAVE 24%
 2 in stock $125.53
Cat: 668629 Rel: 09 Nov 17
 
2 axis CV generator/attenuverting joystick
Notes: The Joystick is a compact two axis attenuverting (attenuator-inverter) joystick controller.

The Joystick features a robust arcade style joystick for manually generating either CV with Range and Offset control or attenuating two input signals. It also includes two push buttons to manually generate gates.

- Current needs: +12V: 25mA, -12V: 10mA
- Width: 12 HP
- Depth: 35 mm (inc. power connector)
Read more
MRP:$196.32 SAVE 25%
 1 in stock $148.16
Click for better price!
or call +44 20 7424 1960
quote 668629
Cat: 686665 Rel: 30 Apr 18
 
Envelope generator & VCA combo in 3HP
Notes: Erica Pico Modulator combines Envelope Generator and VCA in one module with straight-forward controls for live performances.

Small, yet versatile envelope plus VCA, the Pico Modulator is an envelope generator with AD and ASR modes. The circuit can work with linear or exponential curve shapes. Thanks to its loop function, the module is also usable as a LFO. Furthermore, the Pico Modulator comes equipped with a VCA, which is controlled by the envelope.
Read more
 1 in stock $108.02
Notes: Neat utility module allowing up to four channels of CV to be transposed up by one or two octaves. Built-in mults for splitting one signal and transposing it by different amounts. Clean and simple.

Supplier notes:
Quant Gemi is a small transposition/split utility. Each channel can be used to transpose a sequence up 0, 1, or 2 octaves. The channels are also normalled together so the same sequence can be split up to 4 ways and transposed separately.
Read more
MRP:$176.56 SAVE 17%
 2 in stock $147.14
Cat: 561577 Rel: 15 Sep 15
 
Wavetable module with 21st century advanced wavetable engine with classic Waldorf wavetables included - 32HP
Notes: nw1 is our debut product for the popular Eurorack format. It includes an advanced wavetable engine with independent control of spectral envelope and noisiness - just like Nave.

Wavetable scanning is cyclic with optional modulation of travel speed, position, spectrum, and more besides. By providing the worshipped Waldorf wavetable set from the classic Microwave and Wave synthesizers, nw1 will enrich your Eurorack modular system as a potently powerful sound source. The nw1 sound engine also allows for onboard creation of user wavetables via time domain multiple foldover analysis. All you need to do is connect any sound source to the nw1 to transfer audio into a wavetable. Or use the integrated speech synthesizer to translate typed text into wavetables.

Wavetable synthesis is an extremely powerful sound source suited to producing all kinds of vivid metallic hues and digital clangorous tones. It can create organic, bell-like timbres, as well as spectacular-sounding scans through various waveforms with truly ear-opening results. It was almost impossible to create these kinds of sharp-edged, digital sounds back before the invention of wavetable synthesis in the late-Seventies.

Starting with the wavetable synthesizers of those days, a whole new sound palette left its imprint on so many hit records. Today, with Waldorf's neatly-sized nw1 Wavetable Module, this sound is readily available for the popular Eurorack standard - sounding just as pure, sharp, and massively destructive as it did back in the golden days of digital!
Read more
 1 in stock $148.98
Click for better price!
or call +44 20 7424 1960
quote 561577
Cat: 637041 Rel: 22 Mar 17
 
Precision buffered multiple module with individual output trimmers - dark edition
Notes: This is a precision active buffer and multiple. This module has outstanding performance: it features very high input impedance, very low output impedance and an offset voltage of <1mV.

Not all active multi's are born equal, some designs do not fully solve impedance mismatch and tracking problems, or they apply offset voltages to the output and in rare cases can cause more problems than they solve!

AJH Synth have added a very useful (and unique) feature to cure tracking problems: four of the five outputs can be adjusted up or down by +/-5% from the front panel, so that VCO's and VCF's that don't track 1V/Oct exactly can be easily compensated to track correctly without having to re-calibrate the VCO or VCF themselves.
Read more
MRP:$129.64 SAVE 17%
 1 in stock $107.01
Click for better price!
or call +44 20 7424 1960
quote 637041
Cat: 714527 Rel: 22 Jan 19
 
MIDI merger synth module for merging MIDI and USB-MIDI streams into one MIDI/USB MIDI flow - 6HP
Notes: The Shuttle Mate merges MIDI streams from DIN and USB sockets into one MIDI flow which is available simultaneously at a USB and a DIN output socket, making it a perfect companion to Endorphines' Shuttle Control module.

However it can also operate on its own. Since the module is USB powered it can be used totally independently as a standalone device from the Eurorack-power. With the Shuttle Mate you can connect more than one device that delivers clock and MIDI signals with the Shuttle Control. The inbound and outbound USB connectors are both bi-directional I/Os.
Read more
 1 in stock $111.11
Click for better price!
or call +44 20 7424 1960
quote 714527
Cat: 719655 Rel: 03 Sep 19
 
High quality stereo digital FX for AE modular
Notes: Stereo effects processing for Tangible's affordable AE modular system. Offers a total of 15 digital effect programs with CV control over three parameters each. Can run in Eurorack via an optional adaptor frame.

Supplier notes:
The MULTIFX module offers 15 different stereo audio FX programs, a wide variety from common FX like reverb and delay to unique effects like Ring Crusher or Glitch delay. Also a nice shimmer effect is onboard.

Each program has 3 parameters that can be adjusted and additionally be CV-controlled.

With a switch the sample rate can be reduced to half the normal rate, resulting in doubling the effect times (with reverb, delay...) and introducing a nice portion of aliasing.

It is based on the FV-1 DSP chip that is well-known from other FX-modules in the Eurorack world; the MULTIFX module offers the 7 factory programs of the chip plus 8 new and unique ones created by Tangible Waves.
Read more
 7 in stock $102.89
Click for better price!
or call +44 20 7424 1960
quote 719655
Cat: 634751 Rel: 21 Dec 16
 
Dynamic impulse filter synth module in Eurorack format - 8HP wide
Notes: A New Species of Lowpass Gate:
Organic and percussive, the Dynamic Impulse Filter utilizes an entirely new, all analog design to replicate the impact transients and vibrancy of a percussion hit. The result is a versatile filter module that sounds natural and energetic. The Dynamic Impulse Filter works in one of three modes: resonant lowpass filter, high quality VCA, and a combined lowpass gate mode that manages both timbre and loudness at the same time. The core of the filter uses a Sallen-Key topology to produce a smooth two pole filter that will self-oscillate at high resonance settings.

We Love Vactrols Too...
The dynamics response control is the key. Historically, lowpass gates have used a light dependent resistor called a vactrol to impart a magical, organic response onto a sound. This unique signature has given the vactrol an almost mythical status in the synth community. However, the venerable vactrol is not without its problems. Vactrol response times can vary wildly, creating sonic differences from module to module that cannot be adjusted without replacing the vactrol. The fruit of over two years of research and development, the Dynamic Impulse Filter evolves the lowpass gate into the present by retaining the sonic characteristics we love about vactrols while solving all the problems that come with it. The unique design of the Dynamic Impulse Filter replaces the vactrol with a modern analog circuit created to replicate and expand on the signature sound of the vactrol. The response time of the Dynamic Impulse Filter is not static like a vactrol; instead it is tuneable allowing the response of the module to adapt to any musical context.

Used as a filter, the Dynamic Impulse Filter offers a wide sonic palate with smooth frequency sweeps and aggressive resonance. The Dynamics Response control is an essential part of the filter's unique ability to create rich, tuneable sounds. The impulse trigger input and the exclusive Dynamics Response control allow the module to add an organic, percussive quality to any sound or become a versatile analog drum generator. The Dynamic Impulse Filter will uniquely emulate everything from snappy deep kicks, woody toms, and expressive hand drums, to open up a new world of electronic percussive sounds.

Shared Response:
The Response output of the Dynamic Impulse Filter can be used to control other modules that utilize vactrols. The Response output superimposes the variable Dynamics Response onto vactrol based modules allowing the response of a static vactrol to become adjustable. This opens a range of new possibilities for other modules that use vactrols.

Dynamic Impulse Filter Controls:
- Dynamics Response Knob - Sets the decay time related to the impulse gate input and dynamic CV input.
- Dynamics Knob - In filter mode, the dynamics knob controls the centre frequency of the filter. In VCA mode, the dynamics knob controls the pass through signal level. In lowpass gate mode, the dynamics knob controls both the centre frequency of the filter and the pass through signal level.
- Dynamics CV Knob - Attenuates the incoming dynamics cv signal.
- Filter Mode Resonance Knob - Only active in filter mode, the filter mode resonance knob controls the amount of resonance.
- Mode Switch - Switch between the 3 module modes. VCA position (up) enables VCA mode, both position (centre) enables lowpass gate mode, and filter position (down) enables low pass filter mode.
- Input Jack - Audio signal input.
- Dynamics CV In Jack - CV input used to modulate the dynamics amount.
- Response Out Jack - Dynamics response CV output. This output if the dynamics response circuit is optimized to control the vactrol response of modules utilizing vactrols. It is designed to be patched into a CV input. The response out jack will respond like a gate when used with non-vactrol modules.
- Impulse Gate In Jack - Gate or trigger input used to strike the vactrol and quickly modulate the dynamics of the module.
- Out Jack - Audio signal output.
Read more
MRP:$179.03 SAVE 22%
 1 in stock $139.93
Click for better price!
or call +44 20 7424 1960
quote 634751
Cat: 741401 Rel: 01 Aug 19
 
Analogue waveform generator & oscillator - 6HP
Notes: The Electrosmith 3340 VCO is an all analogue, voltage controlled waveform generator that uses a reissue of the legendary Curtis CEM3340 IC.

Many believe this chip to be the greatest sounding analogue oscillator of all time. Simultaneous outputs of sine, triangle, sawtooth, and square waves are available along with linear/exponential FM, hard/soft sync, and PWM capabilities. Volt per octave tracking covers a huge 10+ octaves and is extremely stable across all temperatures. Snag a piece of history with the Electrosmith 3340 VCO.
Read more
MRP:$170.39 SAVE 17%
 1 in stock $141.99
Cat: 614138 Rel: 16 Jun 16
 
Eurorack envelope synth module based on Roland System 100M envelope - 4HP wide
Notes: The second module in the Roland System 100M clone series, the System X Envelope on 4HP. Includes the addition of a range switch for fast/slow response. Even snappier than a crocodile sandwich.

For audio demo, please visit - http://www.frequencycentral.co.uk/wp-content/uploads/2012/11/MoroderClarke.mp3
Read more
MRP:$123.47 SAVE 18%
 3 in stock $101.86
Cat: 679928 Rel: 13 Jul 18
 
All-analogue ADSR module - 4HP
Notes: CEMvelope is based on the legendary ADSR section of the Sequential Circuits Pro-One monosynth, with minor adaptations to integrate it into Euro format. Smooth and snappy! It has a gate input as well as a trigger input, the trigger input works in conjunction with the gate input for multiple triggering from a suitable controller device.
Read more
MRP:$123.47 SAVE 18%
 2 in stock $101.86
Items 1 to 50 of 147 on page 1 of 3
1  2  3  »

Filter

Saved Searches
Save current search
Release Date
Close