100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Home  All Genres  

Search dance music

Options
Items 1 to 50 of 415 on page 1 of 9
1  2  3  4  5  6  7  8  9  »
Don't Open This Box! The First Seven Albums 2004-2018 (Deluxe Edition)
Don't Open This Box! The First Seven Albums 2004-2018 (Deluxe Edition) (limited coloured 180 gram vinyl 10xLP box set)
Cat: NOBOX 001. Rel: 03 Aug 20
 
Experimental/Electronic
  1. The Light At The End Of The Tunnel Is A Train (LP1)
  2. Great Shakes Volumes 1 & 2 (LP2)
  3. Great Shakes Volumes 1 & 2 (LP3)
  4. Great Shakes Volumes 1 & 2 (LP4)
  5. Canned Laughter (LP5)
  6. Canned Laughter (LP6)
  7. Lost Summer (LP7)
  8. Lost Summer (LP8)
  9. Seven (LP9)
  10. Now That's Why I Killed Music (LP10)
 in stock $158.12
Keeley Bassist Limiting Amplifier Pedal (For Bass)
Cat: 782303 Rel: 04 Aug 20 • View all Effects pedals
 
Compresssion & limiting pedal
Notes: The Keeley Bassist Compressor provides true high-fidelity compression and limiting. Be heard and felt using performance compression by Keeley Engineering.

The Bassist Compressor is built around the exotic and extremely high fidelity THAT Corp. 4320. Think of it as very affordable studio-grade compressor in stomp box format! It uses high performance Voltage Controlled Amplifiers, on board true-RMS detector, and ultra high performance op-amps to bring you the very best quality. VCA compressors give you precise control. Therefore they are directly suited to bass guitars. The Keeley Bassist Compressor is both musical and very transparent. Where our older compressors were based on the CA3080 or the LM13700 and are perfect for single coil guitars, the new Keeley Bassist Compressor has no problems with active pre-amps and line level input signals! Not only can the Keeley Bassist handle astonishingly large signals, it has an incredible bandwidth of over 20 KHz and incredibly low noise. No detail in your bass guitar's tone will be lost. The Keeley Bassist will be a sound investment in your tone, you now have rack-mount quality at your feet.

Compression and Threshold

When bass players use the Keeley Bassist Compressor they will be greeted with a sound that is more easily amplified and heard. Using the effect as a limiting amplifier saves your speakers from clipping and distortion. Set the Threshold to look for peaks in your signal and limit distortion from your amplifier or damage to your speakers. Simply watch the Threshold Indicator light to see what type of playing you want to limit, it's that easy! Next set the Compression Ratio Control to determine how much squash you want when the signal is above Threshold. Set Compression all of the way down for no (1:1) compression and use the Gain control as a boost! Set Compression all of the way up for an above-Threshold hard-knee limiter.

A typical soft compressor setting would be 2:1 above threshold. A good starting ratio for the Compression control may be 4:1 as it generally sounds good with bass guitar. A ratio of 5:1 or 6:1 will sound great for slap or funk-style playing. For synth-bass try 10:1 Compression.

Attack and Release

There is a certain figure that just sounds good as far as compression goes; and that's 125 dB/second. With feed forward compressors that use this type of true-RMS detector you use a single time constant parameter. The timing capacitor gives you attack and release times that are adaptive to your playing level or the signal input to the compressor. Bottom line: Attack and Release times vary on program content. Attack times are generally speaking, about 100 times faster than release times.

Attack Time: typically 15ms for 10dB, 5ms for 20dB, 3ms for 30dB

Release Time: typically 8ms for 1dB, 40ms for 5dB, 80ms for 10dB, 160ms for 20dB, 240ms for 30dB

Specs:

Voltage Input: 9V

Current Draw: 50mA

Input Impedance 1 Meg ohm

Output Impedance: 100 ohm

Output Voltage Gain: +30dB Boost

Bandwidth > 20kHz

Total Harmonic Distortion: 0.1%

Noise: -95dBV

Threshold Indicator: Dual LED
Read more
MRP:$260.41 SAVE 25%
 1 in stock $195.20
Keeley Super Phat Mod Full Range Transparent Overdrive Pedal
Cat: 782451 Rel: 04 Aug 20 • View all Effects pedals
 
Overdrive pedal
Notes: Many say the Phat Mod delivers their favorite tone from a pedal. It's that natural break-up that just feels good and lets you express yourself. The dynamics make it feel alive and part of your fingers. That's the reason the modified pedal has stayed on people's boards for nearly 15 years. The Keeley Super Phat Mod is the famous mod now perfected with amazing sounding JFETs that emulate old tube amps in a unique way.

The original pedal was a great design that features tube-like amp stages, tube amp tone stacks, and a variety of tone shaping circuits to bring out the best in any guitar's pickups. The problem with building one in the past has been the difficulty finding the perfect FET to capture the magic. If the harmonic content and grain of the distortion and overdrive weren't exactly right, it was put to one side- then Keeley found the magic device that pushed it over the top, and it was dressed in gold and royal purple. The name badge had to speak of its history and heritage. With Super Phat Mod in an old, Blackface-style logo and the metal-flake clear-sparkle on gold, it will look incredible in any rig.

The Super Phat Mod pedal now has incredible dynamics. It is full range and very responsive. The phrase "transparent overdrive" was born of this design! From country pickin', to blues and rock wailing, the Phat Mod is the choice for those not wanting the over-refined sound of a common Screamer. Set the gain high and let your guitar's volume control or your pick attack do the work. With the Super Phat Mod, you now have all of the refinements-the very best of tone-shaping electronics and modern features like true-bypass.

The Keeley BD-2 was the first mod that had a switch. It was done to give players two modes of bass response. With the slight boost, it was called the Phat mode. It was perfect for players of Strats and Teles who wanted just a small push without being muddy. That same design is also available via the micro toggle on the Super Phat Mod. Later on Keeley released the Luna Overdrive which won a Gear of the Year award in England, and that pedal had further refinements made to it and became the Katana Blue Drive. The Katana Blues Drive still retained the active bass and treble controls but smoothed out the highs and increased the gain range slightly. That was an original design designed to meet many of the tonal characteristics of the Blues Driver. The new Super Phat Mod takes off by duplicating the Keeley Phat Mod part-for-part with the exception of the new super JFETs.
Read more
MRP:$194.98 SAVE 22%
 1 in stock $151.58
Keeley Memphis Sun Lo-Fi Reverb, Echo & Double-Tracker Pedal
Cat: 782474 Rel: 04 Aug 20 • View all Effects pedals
 
Reverb/echo/double tracker pedal
Notes: The new Memphis Sun - Lo-Fi Reverb, Echo and Double-Tracker is Keeley's second studio themed pedal. Like the Keeley 30ms ADT, this pedal gives you a wealth of tones for capturing that classic Rock-and-Roll sound as well as sounds you've not heard before. It's NeoVintage. It's an Echo and Reverb pedal.
Toggle through the different effects presets:

SLAPBACK 600 - Echo for long delays
SUN MODE - Auto Track-Doubling and slapback with short delays
ROOM - Studio simulation reverb

Both of the ECHO 600 and SUN MODE effects have a Room Reverb.

It's a one-knob, rock and roll type of room reverb.

SLAPBACK 600

Rock and Roll is the Devil's music, right? So of course, the delay time is up to 666ms to simulate some unearthly echo machine that never really existed. Filtering in the Slackback mode is done in stages. First, the response is heavily filtered at 1 kHz then compress the thing. Remember the concept: pack a bunch of sound in a small room and it compresses. Next, it's filtered again at 1 kHz ! Sounds like Rock and Roll, right? Aaron Tackett is the Rock and Roll Doctor of DSP at Keeley. Not only is he devilishly good looking, he has a way of making waves look good - adding curves, so to speak. He has added 2nd and 3rd order harmonics to this mix to simulate tape response and equipment distortions. Waves folded back on themselves. You're gonna love his curves.

Time 30-666ms m/ m/
Regen As Jack White says: "Three." Up to three repeats. Or sometimes six....
Reverb Old Rock-and-Roll Room Reverb.

Sun Mode

Let's Do it Twice Mama, It's Alright! Automatic Double Tracking (ADT) was not available in the 1950s, but it's sneaked in here because it makes a wonderful sound. And, if you lengthen the time, it goes right into slapback territory which is at the heart of Country and Rock and Roll guitar sounds. Like our Keeley 30ms, this pedal will do ADT. The Memphis Sun creates a vintage-voiced double-track in mono. Your guitar-playin' "Gemini-Twin" has a very warmed-up tone. Adjusting the Time Control lets you easily create anything from Double Tracking to Slapback with up to 180ms of delay time.

Time Delay Time is 0-180ms. For Automatic Double-Tracking set this control at the second mark or lower, 0-30ms. For slapback echo 30-180ms sounds great. The knob markers notate 0,30,60, 90, 120, 150, and 180ms
Regen Modulation for the ADT. Set to OFF for NO Rate or Depth. Increasing this control increases both the Rate and Depth of "Tape" modulation.
Reverb It's Still Rock-and-Roll Room Reverb to Me

Room

The Room Reverb simulates a small 33' by 18' asbestos-tiled room so filled with music the sounds actually get compressed- with the frequency response of the mics used back then taken into account. The RCA 77 is loosely simulated by a group of filters including a HPF = 300 Hz and LPF = 8 kHz. Many artifacts are incorporated in our room reverb. And second and third order harmonics are added to make sure it sounds just right.

Time is the Pre-Delay amount: 0-150ms of pre-delay. This allows for a slapback sound as the first reflections come into focus.
Regen is the Tone control: this is an active filter +/- 10 dB and is centered around 1.1 kHz.
Reverb is the Depth control for the reverberations.

That's What I Say Rockin' Robbin!
NeoVintage - Low Fidelity. That's right. That's what I say. This doesn't sounds like some merry band of pixie nymphs playing digital fiddles in your ear.
Read more
MRP:$234.24 SAVE 29%
 1 in stock $166.85
Keeley Synth-1 Reverse Attack Fuzz Wave Generator Pedal
Cat: 782476 Rel: 04 Aug 20 • View all Effects pedals
 
Fuzz wave generator pedal
Notes: The Synth-1 allows you to create fuzzed-out synth waves! Use the Filter and Blend controls to mix your guitar with the fuzz from the synth. Go from churning slow-gear reverse swells to sounding like a light saber.

The Keeley Synth-1 is a guitar-triggered, single-note wave generator. You control the tone of the wave with the Filter Control. The lead-in time or swell of the note is controlled with the Attack knob. Then use the Blend control to remove the natural tone from your guitar as you slide through synth-sounding fuzz waves. Use an expression pedal to control the Filter, and now you have Wah-Wah-like control of the Synth-1.

Synth Wave Generator
Create fuzzed-out, single note synth sounds

Reverse Attack
Volume Swell Effect - put your guitar in slow gear!

Chaos Switch- change dimensional triggering and octaves and stuff

Filter - shape the EQ and tone of your fuzz wave

Wave Selector - change wave modes on the fly with your foot!

Control the Blend of your natural guitar and the wave generator

Side Mount Expression Jack for TRS control of the Filter

Top Mounted Jacks, True-Bypass

Designed and Made in the USA
Read more
MRP:$234.24 SAVE 22%
 1 in stock $182.12
Keeley Red Dirt Germanium Special NOS Germanium Transistor Equipped Red Dirt Overdrive Pedal
Notes: Keeley's latest mod to the venerable platform has everyone grinning here at the shop. The Red Dirt Germanium is nothing short of a red hot saturation machine. Perfect classic amp tones.

The Red Dirt overdrive began from a quest to find the perfect classic drive sound while also offering new levels of sonic versatility to satisfy a wider range of musical styles. Founder and head engineer Robert Keeley took this idea and combined the great sounds found within his original "Mod Plus" and "Baked" modified pedals and added refinements found exclusively in his custom pedal line. A Keeley designed FET input stage makes this overdrive breakup in a whole new, genuinely "tube like" style that will have your leads singing and your rhythm playing sounding more dynamic and expressive than ever. It all culminates in an overdrive that is superbly dynamic, with crispness and clarity that let players cut through a dense mix, while retaining the plump midrange. By incorporating these tones along with the Keeley standard of U.S.A. hand-built quality using premium components, the Red Dirt overdrive aims to become an indispensable part of any pedal chain.
Read more
MRP:$234.24 SAVE 17%
 1 in stock $195.20
Keeley El Rey Dorado Overdrive Pedal
Cat: 782412 Rel: 04 Aug 20 • View all Effects pedals
 
Overdrive pedal
Notes: The El Rey Dorado is your go-to box for that Plexi tone. Yes, there is a wide range of 1960s Plexi Amp Tone in terms of power, which tubes are installed, which speakers and/or cabinet is used, but the El Rey Dorado hits the core tone bullseye! One of the many reference points for the tone was the JTM 45/100r full stack. (It's a dead-on reissue Marshallr did with crazy cool custom-made vintage-recreation speakers and dual transformers to transfer the load of the 4 EL-84s!)

The El Rey covers a lot of classic British amp tones by featuring two gain modes with the Power Toggle. With the Power Toggle switch you have control over the compression and harmonics. Low Power mode is louder, has more girth, and has fewer harmonics for a more old-school tone. The High Power mode has more compression, more harmonics, and a tighter, more defined tone. Old-school crunch in Low Power mode, super lead tones in the High Power mode.

Simple as grabbing an open E Chord!
Volume, Gain, Tone, Power Toggle: Yes

Keeley Engineered: Yes

Ripe Tide Gain: Yes

9 volt battery: 9V compatible (battery not included)
Read more
MRP:$194.98 SAVE 17%
 1 in stock $162.49
Keeley DDR Custom Drive Pedal With Delay Or Reverb
Cat: 782386 Rel: 04 Aug 20 • View all Effects pedals
 
Delay/reverb pedal
Notes: The DDR combines the most common guitar effects- DRIVE and WET- into one pedal. Choose between two classic overdrive tones and then pour on some delay or reverb. One pedal, any gig.

The DRIVE section gives you two styles of overdrive to choose from: Crunch or Lead. The Crunch Style gives you a gritty British tube-amp combo sound. The Lead Style gives you a warm and dark, mid-pushed overdrive. The WET side of the pedal gives you Delays and Reverbs. A Vintage/Modern Switch allows you to toggle between Spring & Plate reverb or Analog & Digital delay. Use the built-in effects loop to insert effects between Drive and Wet, or run it by itself as the only pedal you'll need!

DRIVE Channel:
A pair of modified super-drives to choose from. Volume, Tone, and Drive for days!

STYLE Switch:
Tube-amp Crunch or Lead-channel Sustain

WET Channel:
three knob delay or reverb with Blend, Decay, and Time

Delay/Reverb Switch:
Center toggle, WET Mode Select

Top-mounted jacks for effect pedal insert or split

TRS Insert Switch:
side mounted selector

True-Bypass or Trails Switch:
side mounted selector

9VDC, 100 mA, no battery option
Designed and Made in the USA
Read more
MRP:$234.24 SAVE 26%
 1 in stock $173.39
Keeley Neutrino V2 Optocoupler Envelope Filter/Auto Wah Pedal
Cat: 782443 Rel: 04 Aug 20 • View all Effects pedals
 
Envelope filter/wah pedal
Notes: The Keeley Neutrino V2 is an amazingly toneful and compact form of the classic opto-coupler envelope filter. The Neutrino takes your guitar playing and creates an automatic wah sound based on your pick attack! Envelope filters or auto-wahs as they are often called, sound and react best when they are opto-coupler based. The opto-couplers used in the Neutrino are particularly smooth, giving you an amazing vowel-like tone. The Keeley Neutrino gives you 3 filter ranges, 2 directions, 2 ranges for the frequency center and a Peak control. Keeley has engineered a power supply voltage-doubler so you maintain the highest headroom for your tone. An incredibly tough build means it will last for many decades to come. Whether you're in a jam band or playing funk, the Keeley Neutrino V2 delivers incredible vocal-like tone.
Read more
MRP:$234.24 SAVE 27%
 1 in stock $170.69
Keeley Oxblood Overdrive Pedal
Cat: 782448 Rel: 04 Aug 20 • View all Effects pedals
 
Overdrive pedal
Notes: When inspiration hits, you need the voice to proclaim it. When you need that voice, count on the Keeley Oxblood Overdrive to be your beast of burden.

The Keeley Oxblood Overdrive is Keeley's response to everyone cloning the "Mythical Beast" pedal, with the intent of building an original design, a circuit that lets players blend from perfectly clean to amp-crushing roar, and animpossibly huge and focused midrange that makes any guitar- Strat, Paul, Tele- sound incredible.

Clean, distortion, fuzz - it's all there.
With the Oxblood Overdrive you roll off the Drive Control and get a perfectly clean sound; you can dial in any amount of distortion and volume to stomp an amp into pure tonal Nirvana. The Keeley Oxblood Overdrive offers you two ways to clip and saturate your signal with overtones by selecting carefully chosen diodes. These are different than the standard Oxblood. These diodes were chosen to give you bigger, more open amp tones without a lot of compression.

The key to the ultimate overdrive, in our opinion, is the ability to control five different parameters.

Bass response
The Phat Switch cuts bass response to give you that classic Screamer or that mythic, K-like midrange shelving. The bass response, when cut, is saturated with a hint of 2nd order harmonics. Punchy and full yet not overbearing, it cuts like a buffalo.

Clipping
Sometimes there just ain't enough gain in the world. Well, not so with this beast. The Clipping Switch gives you the ability to sing with near infinite sustain or just stand on your amp like a chief.

Tone Control
You need to be able to dial in the highs perfectly or nothing else matters, right? The highs are what make it ear candy or ice picks, giving you the range to do whatever the heck you want to do. And that's a two-heck sentence.

Volume
You have to be able to put the pedal to the metal whenever you darn well chose. Voltage doubling in our circuit gives you just that. Headroom for days. Slay an amp, leave it a bloody mess. No, you won't blow tubes, but you will have them at the right temperature to make them glow with delight.
Drive. What? You want me to describe Drive? Shoot, from "Is it ON?" cleans to searing sustain and saturation. It pushes you. Compels you to play. Non-stop playing....

Midrange
The 6th sign of a wonderful overdrive pedal is what's under the hood. It's masterful creation of sultry mids. The kind of mids singers or cellos are known for. Throaty and powerful. Not just a woman tone, but a manly roar. Not congested and stuffed up. Focused and brilliant.

Trifecta
The Keeley Oxblood Overdrive was designed by Robert Keeley and Craighton Hale with a lot of help and insight from Jack Orman. Jack Orman has been a pioneer in the modern world of effects for 20 years. His thoughts and ideas are incorporated by nearly every boutique builder out there. Here is your chance to hear a brand new creation designed to outperform any of the clones.
Read more
MRP:$260.41 SAVE 25%
 1 in stock $194.10
Keeley Fuzz Bender	 Fuzz Pedal With Active EQ And Gate Controls
Notes: The Keeley Fuzz Bender is a 5 knob-3 transistor modern fuzz using a combination of high-gain silicon and silky smooth germanium. What makes fuzz better? Active EQ. Using two gyrators as an active EQ gives you the ability to create massive fuzz tones not possible with typical square-wave boxes. Pummel your amp with over 20dB of boost/cut at 100Hz and 10K Hz. The Fuzz Bender is built around vintage Japanese germanium to create its monumental fuzz tones. With the all new Bias Control, you control the attack and decay of your notes. Anything from Fat Square Waves to Angular Fuzz to glitchy-Velcro attacks are possible with the Bias Control. The Fuzz Bender's five knobs confirm size matters when creating a new and epic world of fuzz.
Read more
MRP:$194.98 SAVE 18%
 1 in stock $159.75
Click for better price!
or call +44 20 7424 1960
quote 782420
Keeley Bubble Tron	Dynamic Flanger/Phaser Pedal
Cat: 782324 Rel: 04 Aug 20 • View all Effects pedals
 
Flanger/phaser pedal
Notes: The Keeley Bubble Tron Dynamic Flanger.Phaser pedal explores some of the famous, but very hard to find sounds of the past. Keeley Engineering has created another batch of Neo-Vintage effects that never were. This time Keeley has made the Flanger and Phaser in dynamic with your pick attack and strength. Then add the Random Stepped Filter with the new "M-Style Synth" bandpass shaping feature, and you have a lead guitarist's dream tool. Shut up and play your effect pedal! Yeah, you play this thing like an extension of your mind and fingers.

The Keeley Bubble Tron Dynamic Flanger Phaser and Random Synth Filter has three modes of operation.

The Flanger section of the pedal draws on inspiration from the MicMix DynaFlanger. This incredible piece of gear was used by FZ to create many of the sounds in the late 70s to mid 80s where a dynamic flanger was used to get envelope based flanging in his solos. A dynamic flanger is one that starts and stops based on your pick attack or envelope. The word envelope is used because if you were to measure the "weight" of your guitar signal and put it in a storage container (the "envelope" is an imaginary capacitor) it can then be used to control another part of the circuit. The Bubble Tron uses your playing to start and stop the flanger. Most flangers just cycle around and around and you can hear that swooshing in the background. Not in this case, it only cycles as you play. Many flangers offer only positive or negative feedback. This one allows you to try either with the FDBK Control. The negative feedback sounds more vocal like and hollow to my ears while the positive feedback is more conventional and has a thicker, smoother sound. The Sensitivity Control allows you to set how delicately you want to play and have the flanger go fully crazy on you. You can set for crazy silverback gorilla flange or easy flangin' on Sunday morning. The Depth Control is just that, how deep you want the flanging to be.

The DynaMoPhase section of the Bubble Tron is actually two phasers. One has an LFO that you set the speed of with the Rate Control (while it's depth is dynamically controlled) and the other is a true Dynamic Phaser. It starts and stops based on your pick attack. Again, you can set the Depth and and Sensitivity of this phaser to give you a very watery sound that is all based on your guitar's signal. You can turn off the standard phaser and just run it DynaPhase by turning the Rate Control off.

The White Zone is for Loading and Unloading Only.

The only effect that isn't dynamic is the Filter Section of the Bubble Tron Dynamic Flanger Phaser. With the Filter you can control the different ramps or random nature of the pedal with the Shape Control. The very exciting part of this pedal is the Sensitivity Control which is actual like a vintage synth style bandpass filter control. It shapes the bandpass filter on the filter and gives you some incredible keyboard like sounds.

One very nice side effect of dynamic based effects is that they don't produce the constant, swooshing sound of LFO based effects.

If you're a lead guitar player that likes to explore and has never had the kind of expression or dynamics from your sound effects that you have in your mind, this is for you. If you are a sound-experimentalist, this is for you! The sounds are nearly endless in that your input shapes what the effect will do.
Read more
MRP:$260.41 SAVE 27%
 1 in stock $189.75
Keeley Aurora Digital Reverb Lush Spatial Studio Quality Reverb Pedal
Notes: Turn down the lights, turn up the spectrum.

Join Keeley Electronics' grand entrance into the hallowed halls of psycho-acoustic processing - the Aurora Reverb. Few effects complement a guitar better than reverb; from spring reverb coils in a tank to the distant echo of cathedrals to 600 pound sheet-metal plate vibrations. Reverb captures our imaginations and plunges us deeply into our musical psyches. Reverb IS the key to the highway.

At Keeley Electronics, the Aurora Reverb had to meet certain specific criteria. It had to be affordable with no compromise to audio quality. It had to be easy for guitarists to use and be inspiring. And it had to offer the essentials for tailoring your tone without a dozen knobs to learn. Now achieved, we are proud to offer a true bypass, 100% dry analog path, low noise, 24 bit, high-fidelity reverb processor.

AND IT SOUNDS GREAT!

The following controls offer everything from pristine, fast reflections to ethereal spaces to deep, dark and endless caverns.

The Toggle Switch
The three most popular reverb styles that don't come built into your amplifier are Room, Plate and Hall. In the smallest footprint possible, we offer what used to take up a recording studio room or an entire city block. You can achieve cathedral resonance, enormous surface areas of sheet-metal plate sounds or convincing room decays. Room sizes range from something like a broom closet to that of a barn. (Also, careful adjustments to the Room settings yield a signal bordering on the verge of spring reverb, so if your amp doesn't already have a tank, the Aurora pedal has you covered.)

Decay
Decay controls the amount of time it takes for the reverberated sound to disappear. The Aurora pedal provides a range from a realistic, close-quarters reverberated dimension to a "walk-away-and-come- back in a while" signal of complex, still-ringing musical reflections.

Slapback
Otherwise known as "pre-delay". Pre-delay creates distance. How soon or late you hear the first reflection is crucial to crafting the reverberated space. Sometimes you do not want any delay between your note and the reverb. And sometimes, for clarity's sake, you want the reverb to wait a moment before joining the dry signal. Such a setting enables short, staccato, single-syllable type expressions to finish articulating before being suffused AND joined by the tail-end of previously reverberated sounds. The Slapback setting adjusts from zero to 100 milliseconds. When the illusion of infinite space is required, set your Slapback to zero and you'll streak vividly away like Dr. David Bowman breaking free of Jupiter's gravitational pull.

Warmth
Dial up the warmth. Unlike most tone controls, ours is a dampening control and increases the warmth, as it is rolled up. Its brightest setting is when completely dialed down.

Blend
Blend will take your 100% analog dry signal and blend in the reverb, from just the slightest mix of wet to much more. It is recommended that you place it at the end of your pedal chain and use the Blend Knob to tailor your sound.

The Keeley Aurora Reverb provides the essentials guitarists are looking for when they need reverb on their pedal boards. Like that ethereal glow to the mighty Earth herself, Aurora creates a natural halo of sound in the atmosphere of your magnificent core tone.
Read more
MRP:$234.24 SAVE 27%
 1 in stock $170.69
Keeley Caverns Delay/Reverb V2 Delay Pedal
Cat: 782331 Rel: 04 Aug 20 • View all Effects pedals
 
Delay/reverb pedal
Notes: The Caverns Delay Reverb V2 dual-effect pedal combines delay and reverb for the perfect end to any pedal board. It features Keeley's analog-style tape delay with modulation options. The 650ms of warm delay combine with Spring, Shimmer or Modulated Reverb. Caverns now comes with a True-Bypass or Trails option. Because of its small and compact design, the New Caverns is a perfect fit for any fly-rig or small board where you have tight space requirements. The New V2 features Keeley's most popular time-based effects, blended perfectly via a design fine-tuned for over 2 years. Simply put, it will be an amazing addition to any board.

The Reverb side of the pedal features 3 cavernous sounds:

Spring Mode - Blackface Amp style spring reverb with F Style Tremolo
Modulation Mode - Choral modulation to the reverb for a huge, cavernous space
Shimmer Mode - Reverb with emphasis on octave-up voices in the reverb trails

The Delay side of the pedal incorporates Keeley's popular Magnetic Echo circuit, which is designed to emulate analog tape delay lines. Three way switchable modulation gives you options for adding Wow and Flutter to the repeats. Perfectly voiced echoes sit well in the mix, either clean or with distortion.

The New Caverns Delay Reverb V2 builds on the old Caverns pedal by giving players a more open and logical control layout with more space between the foot switches.

Top-Mounted Jacks allow for a compact pedalboard layout.

True-Bypass or Trails option gives you the freedom to create huge caverns of sounds and lets them ring out even after you turn the pedal off. Our buffers are engineered to retain your tone and to feed your amplifier a full-strength signal.

The New Caverns Delay Reverb V2 is entirely built in the US. Keeley's veteran crew builds the most reliable and road-worthy gear.

Use 2 TRS Breakout cables for effects patching or to use the Caverns with a pro switching system.
Read more
MRP:$234.24 SAVE 27%
 2 in stock $171.20
Keeley Verb O Trem Inspired Reverb & Tremolo Pedal
Cat: 782478 Rel: 04 Aug 20 • View all Effects pedals
 
Reverb/tremolo pedal
Notes: The Keeley VoT reverb and tremolo combo gives players a simple and beautiful sounding way to end their pedal boards. Reverb and Tremolo often sound best at the end of your guitar rig, after effects like compression, fuzz or overdrive. The Keeley VoT gives you famous Keeley spring and plate reverbs as well as modulated tube amp tremolos. This immaculate pairing provides you with everything you need for a small, compact pedal board.

When you go minimalist, you still consider Reverb and Tremolo. So if you're doing a small gig with a compact board or you just want the captivating power of tremolo and reverb at the same time, the Keeley VoT is a simple and beautiful sounding combo.

Reverbs
Keeley 2 Spring Reverb is the real deal, it's so good sounding, they install it in The Amp now. The Keeley Spring Reverb allows you to get that splashy spring sound that instantly fattens your guitar tone.

If you want something super smooth, however, you flip it over to switch in the Plate Reverb. Get that huge plate reverb sheen by simply flipping a switch!

Tremolos
A Lotus Flower of Tremolos- you have three tremolos in the Keeley VoT.

R+T is an organic tube bias type tremolo. This means you hear the tube amp bias change enough to modulate the volume. A very personal and haunting tremolo. Very moody.

Mack - This mode is a MagnaAmp style pitch vibrato. Done by carefully changing the phase to elicit a silky smooth pitch shift. Sounds like you have your finger on the pulse of life. Sometimes a walk on the wild side is the way to go.

HAR - Harmonically Amplified Resonator. I made that up too. Harmonic Tremolo -two filters that we vine around, back and forth, creating a notch filter that gives you that Tower of Flower sound.

VoT - Lotus
Here's where the flowering magic occurs: you can set the VoT to be either Reverb OR Tremolo OR Both if you want. Let's say you just need some 'verb for the night, simply reduce the Depth control! Reverb Purity.

What if you want to use the tremolo only? Simply roll off the Reverb control.

This pedal can simply and easily be reborn into any combination of tones you need.
Read more
MRP:$194.98 SAVE 17%
 1 in stock $162.49
Keeley Filaments High Gain Distortion Pedal
Cat: 782417 Rel: 04 Aug 20 • View all Effects pedals
 
Distortion pedal
Notes: Keeley Electronics, the leading manufacturer of pedals built in the U.S., announces the release of their most potent and aggressive metal stompbox to date: the Filaments High Gain Distortion Pedal. The Filaments accurately replicates high-gain tube amps by layering 3 stages of gain while providing 7 ultra-flexible ways to EQ the tone.

The Filaments has more flexibility in tone-shaping than any other Keeley stompbox. Level and Gain set the stage for rich layers of high gain tube-amp saturation. Bass and Body give you the punch and authority of a gain monster no matter what size amp you are playing. Even if you're running a 10-inch speaker the bass and body controls will give you the low end bass response you need. Running through a 4×12 already? Just dial back the body control to keep the sound tight and focused. Have an amp that's hard to push? The Boost and Crunch switches give you two different levels of gain and compression to get your edge just right for your tone. The Presence control works with the Bright control to give any guitar or pickup combination the authority to stand up and shout. Lastly, the Treble control gives you that added range of highs to make your amp sing.

Metal is more nuanced and subdivided that nearly any other style of music outside the classical stuff. The Keeley Filaments High Gain Distortion pedal feels your pain, brother. So of course its amazing 7 layer toneshaping lets you chameleon into any of these types of metal: Christian or Death Metal, Black Metal or Folk Metal, both types of Core, Grind and Metal. Crust Punk or Glam Metal? Progressive Jazz Metal or just good old Stoner Metal? The Filaments pedal has got you covered. Get a Keeley Filaments High Gain Distortion pedal and pound it out !! Get creative! Create your own Metal.

Keeley is well-known for high-end tone and durability. His attention to detail in stompbox tone, tube amp building experience and "tough as nails" build quality ensures his new Filaments pedal will dominate the high-gain pedalboard. Isn't it time you had a high gain pedal that gives you everything you need for the road?

Tech Specs:

9-18 VDC - Louder and More Powerful at 18 Volts!

Ultra Low Current = 10mA

Center Negative Tip

Power Supply Required - No Battery Operation

True-Bypass
Read more
MRP:$247.33 SAVE 21%
 1 in stock $195.20
Keeley Hooke Reverb Spring/Octave Reverb Pedal With Tremolo
Cat: 782425 Rel: 04 Aug 20 • View all Effects pedals
 
Reverb/tremolo pedal
Notes: The new Hooke Spring Reverb from Keeley brings vintage tube-amp spring reverb and tremolo into one package. Bring your Blackface reverb and tremolo on the road with you without lugging around your prized possession! Choose from Classic Spring, Blackface Trem-n-Verb, or an organ-like Fugue-Verb.

The Hooke Spring Reverb begins with a Spring Reverb mode. The main features of this mode include the Tone and Spring controls. The Tone control allows you to work within the range of bright and spanky to dark and thick. The Spring control is the amount "looseness" or "Sproing!" in the reverb pan. Loose springs seem to generate a lot of reflections, and you can hear the reverb "bounce." With the Hooke, you can simulate a specific reverb pan of a vintage amp, two-springs, three-springs, short, medium, long decay ... it's all in there. What's more, combinations of these two controls allow you to fine-tune the tone and the character of the springs and tubes in order to dial in your favorite vintage reverb response. The depth and warmth of the Hooke reverb is simply remarkable. It's one of our finest creations.

Trem-n-verb is designed to give you the ultimate Fullerton, CA black panel Vibrato channel reverb. Everyone knows that it's not really (pitch) vibrato, it's tremolo. Keeley have EQ'd and filtered the sound to not only be tube-like, also crafted a tonal modification that makes for a deep, throbbing tremolo. By adjusting the bias of the output tubes for the volume tremolo, you also dip the volume of the reverb. A special recipe has been created in which the reverb washes over the tremolo texture just a little thickened in order to craft a tone that is truly magical.

The Hooke Reverb needed something crazy, something that just didn't exist. Ah, yes, all wet. All wet is where magic can happen. No original signal, all wet spring reverb with octave up and down. Church Organ, Organ Reverb, Fugue It! Get Hooked and Go Fugue!

Read more
MRP:$234.24 SAVE 22%
 1 in stock $182.12
Pioneer DDJ200 Smart Wireless DJ Controller Pioneer DDJ200 Smart Wireless DJ Controller Pioneer DDJ200 Smart Wireless DJ Controller Pioneer DDJ200 Smart Wireless DJ Controller
Cat: 732816 Rel: 22 May 19 • View all DJ controllers
 
Entry level DJ system with multi-app compatibility & support for music streaming services
Notes: The baby of Pioneer's DJ controller range. Simple two-deck setup, compatible with a range of software including WeDJ, which offers real-time tips and pointers to help you learn to mix.

Supplier's notes:
Start DJing with our easy-to-use DDJ-200 smart DJ controller. Lightweight and compact with a pro-style layout, it'll help you learn to mix and, if you want to, develop DJing from a hobby into something more. Put your own twist on the music as you mix for friends at parties. Play tracks via your smartphone or PC/Mac using a variety of DJ apps and software including our dedicated, free app WeDJ for iPhone, as well as djay and edjing Mix. Depending on your device and the program you choose, you can mix music stored in your iTunes or rekordbox library, or stream songs from Beatport LINK, SoundCloud Go+, Deezer or even Spotify.

Quickly develop your mixing skills with the help of the Tutorial and Pop-Hint features in WeDJ for iPhone. These functions will teach you about the hardware and help you understand DJ terms. Your hands will be flying between the DDJ-200's jog wheels, buttons and knobs when you're done. And we've added Transition FX to help you match phrases and smoothly transition between songs. This beginner DJ controller will have you dropping mixes and playing friends' requests like you've been doing it for years.

Compatible apps:

Connect your smartphone, tablet, or PC/Mac to start mixing. A number of software programs and apps - including WeDJ, djay, edjing Mix and rekordbox dj - are compatible with selected devices. You'll also have free use of all the features in WeDJ for iPhone that normally require in-app payments.

Compatible streaming sites:

Depending on your app and device combo, you can mix sounds via streaming services including Beatport LINK, SoundCloud Go+, Deezer, and even Spotify.

Tutorial & pop-hint:

Our updated WeDJ for iPhone app includes Tutorial and Pop-Hint features. They'll help you learn how to operate the controller, discover the basics of DJing including common DJ terms, and have you mixing in no time.

Transition FX:

Just starting out behind the decks? Transition between tracks and make it sound professional with the Transition FX feature in WeDJ for iPhone. Choose from 11 effect styles and simply slide the crossfader to the other side to smoothly switch tunes.

Compact lightweight body:

The DDJ-200 is lightweight and portable. Leave the speakers at home and play sound from your smartphone, tablet, or PC/Mac's audio outputs. No outlet handy? No problem. Power the controller via an external battery.
Read more
MRP:$181.90 SAVE 17%
 More than 10 in stock $151.58
Click for better price!
or call +44 20 7424 1960
quote 732816
Sennheiser HD25 Plus Headphones With 3m Coiled Cable (includes 1.5m straight cable, replacement ear cushions & protective pouch) Sennheiser HD25 Plus Headphones With 3m Coiled Cable (includes 1.5m straight cable, replacement ear cushions & protective pouch) Sennheiser HD25 Plus Headphones With 3m Coiled Cable (includes 1.5m straight cable, replacement ear cushions & protective pouch)
Cat: 601628 Rel: 25 Feb 16 • View all DJ headphones
 
Professional DJ headphones with coiled and straight cables & replacement cushions
Notes: Top-of-the-range version of Sennheiser's consistently excellent HD25 headphones, bundled with a full range of accessories. One of our favourite models for DJ and studio use.

Supplier's notes:
The HD 25 PLUS is identical in design to the HD 25 but spoils its users with extra accessories and two included cables. Users can choose between a coiled steel cable (length: 3m/1m) and a straight, 1.5m steel cable.

The PLUS version also comes with a handy storage pouch and a second set of ear pads in a soft velour version.
Read more
MRP:$234.24 SAVE 18%
 More than 10 in stock $191.93
Click for better price!
or call +44 20 7424 1960
quote 601628
Endorphin.es Milky Way Stereo FX Module
Cat: 734890 Rel: 15 Oct 19 • View all Synth modules
 
Multi effects module - 6HP
Notes: Milky Way is a multi effects module with stereo signal flow. Its algorithms are already known from the Blck_Noir and the Grand Terminal.

- Simple and effective 6hp stereo* FX module
- Comes with "T.F.D" firmware installed: 16 types of effects are available, sorted in two banks
- Meta CV effects scanning
- Volume control with VCA

*depending on the effect type
Read more
 6 in stock $179.93
Click for better price!
or call +44 20 7424 1960
quote 734890
WMD C4RBN 4/2 Pole State Variable Filter Module WMD C4RBN 4/2 Pole State Variable Filter Module WMD C4RBN 4/2 Pole State Variable Filter Module
Cat: 784084 Rel: 31 Jul 20 • View all Synth modules
 
Pole state variable
Notes: Lovely little multi-mode filter from WMD. Neat features like switchable input saturation with CV control, output wavefolder and temperature-compensated 1V/oct tracking. Small and versatile.

Supplier notes
C4RBN (pronounced "Carbon") is a 4/2-Pole State Variable Filter with input saturation, output wavefolding, and more. It features a wide range of character from nice and clean filter sounds to screaming, squelchy, acidic mayhem.

C4RBN builds on WMD's history with state-variable filters adding interface refinements and improved warm environment stability for live performance and beyond. A novel input saturation circuit plus the output wavefolder from WMD's classic SYNCHRODYNE filter pair together to push the timbral flexibility to the next level. C4RBN is the building block to life in your eurorack.

Specs:
Size: 4hp
PCB height: 112mm
Depth: 38mm (with cables)
Power: +92mA, -82mA
Audio Input: 100k ohm impedance
20Vpp range
V/Oct Input: 82k ohm impedance
Temperature Compensated
CV Inputs: >100k ohm impedance
Filter Outputs: 1k ohm impedance
20Vpp range
Read more
MRP:$232.93 SAVE 18%
! low stock $190.83
Click for better price!
or call +44 20 7424 1960
quote 784084
Native Instruments Maschine Mikro MK3 Music Production & Performance Instrument Native Instruments Maschine Mikro MK3 Music Production & Performance Instrument
Cat: 702731 Rel: 18 Sep 18 • View all MIDI controllers
 
Maschine Mikro MK3 compact beatmaking instrument
Notes: Already a firm favourite. The third incarnation of NI's mini Maschine is better than ever. Sampling, sequencing, synths and much more in a compact box.

Supplier notes:
Meet MASCHINE MIKRO, your flexible, compact companion for making music with a laptop. Use it to tap out beats, play melodies, and build up tracks fast, fun, and hands-on. Want to start creating right away? We've thrown in everything you need including instruments, sounds, effects, and powerful tools like sampling and drum synths.

MIKRO gives you four different ways of getting hands-on with your music using the 16 pads. Drum beats in Pad mode, with color coding for kicks, snares, and other sounds. Switch to Keyboard mode to play melodies with the pads. In Chord mode, it's easy to lay down inspiring chord progressions. And in Step mode, program beats and patterns visually in a classic step-sequencer style on the 16 pads get exciting musical results quickly.

Find, audition, and swap sounds without stopping the music. Browse through your favorite instruments, and load samples, projects and kits. A compact screen guides the multi-function encoder so you know exactly what you're controlling, while staying in the creative flow.

Found a great sample? Hit the Sample button to quickly load it into your project from the software. Record from your audio interface to capture from vinyl, play in a guitar, or grab any other sound into your track. Shape and refine your samples using the powerful editing tools in the MASCHINE software.

You'll find inspiration using the selection of premium sounds, samples, instruments, and FX included with MASCHINE MIKRO. Plus it comes with full versions the popular synths MASSIVE, MONARK, and REAKTOR PRISM.

MASCHINE MIKRO gives you everything you need to get creating music, and it also works as plug-in in Ableton Live, Logic Pro, Cubase, FL Studio, or any other compatible DAW as a VST or Audio Unit. Use it to build up loops, then work with them in your DAW to quickly flesh out tracks, making it a powerful addition to your setup, however you make music.

Don't feel lost staring at a blank screen. Whether you're making your first track, or wanting to step up your game, we've got you covered. Discover exclusive content from our MASCHINE experts covering everything from your first steps, to diving deep into power features with our popular TruTorials.
Read more
MRP:$260.41 SAVE 25%
 1 in stock $195.20
Click for better price!
or call +44 20 7424 1960
quote 702731
Nagaoka MP110H Phonograph Cartridge & Stylus Premounted In Headshell
Cat: 567649 Rel: 27 Mar 15 • View all Hi-fi cartridges
 
Headshell, cartridge & stylus set, with elliptical stylus tip and aluminium alloy cantilever
Notes: Successor to the classic Nagaoka MP11 cartridge, here pre-mounted in a headshell for ease of setup. An excellent upgrade to the standard cartridges supplied with most turntables.

Supplier notes:
The Nagaoka MP-110H the successor to the highly acclaimed and classic Nagaoka MP11 phonograph cartridge, the new Nagaoka MP-110 H phonograph cartridge extends and strengthens its predecessor's prowess and talents to a new level of radiance. You'll hear more music, more detail refinement to enjoy and savor. The Nagaoka MP-110 is the cartridge to start with and to keep for a long time.

Features:
-Superfine polished eliptical diamond bonded stylus
-Powerfull samarium cobalt magnet
-Lightweight aluminum alloy cantilever for high fidelity
-Carbon fibre reinforced plastic shoe
-Anti ferro magnetic permalloy shield casing

Stylus replacement: Nagaoka JN-P110

The stylus replacement interval varies depending on the using conditions. But for general use at home, the reference time is between 150-200 hours in which the stylus begin to wear and the tone quality deteriorates. Recommend replacing the stylus as aerly as possible to enjoy clear tone for a long time and not to damge the disc grooves.
Read more
 4 in stock $183.20
Click for better price!
or call +44 20 7424 1960
quote 567649
Faderfox Micromodule PC4 Pot Controller Faderfox Micromodule PC4 Pot Controller Faderfox Micromodule PC4 Pot Controller
Cat: 563494 Rel: 05 Mar 15 • View all MIDI controllers
 
Universal controller for all kinds of MIDI controllable hard- and software, iPad compatible with camera connection kit
Notes: You can never have too many knobs, right? The PC4 packs 24 rotary pots into a handy little box, allowing you to control software and hardware parameters over MIDI. Nice.

Supplier's notes:
PC4 is a universal controller for all kinds of midi controllable hard- and software.

The device has 24 standard pots with rubber knobs designed in a 4 x 6 matrix. Various kinds of midi commands like control change, pitchbend and program change are possible.

Of course you can assign the pots to any of these commands by learning incoming midi commands like software it does. The pots work with standard resolution of 7 bit to have full compatibility to any software and hardware instruments, effects and DAW's. Use the internal 16 setups to save your individual settings. Backup and restore of all settings by sysex dumps is possible too.

The factory settings are perfect to control music and video software products out of the box if they are freely assignable. So any additional device programming isn't necessary for many applications.

A special feature is the switchable snap function for all pots. This simple function is very rare on standard midi controllers with pots. It avoids possible annoying value jumps.

Three switchable midi routings makes the unit much more flexible for complex midi setups.

Simultaneous control of external gear and software instruments is no problem for the PC4 due to the available USB and MIDI ports.
Read more
 2 in stock $188.66
Encore
Encore (33xCD box set)
Cat: DBTMCDBOX 02. Rel: 23 Mar 20
 
Disco/Nu-Disco
  1. Lady Of The Night
  2. Love To You Love You Baby
  3. Love Trilogy
  4. Four Seasons Of Love
  5. I Remember Yesterday
  6. Once Upon A Time
  7. Once Upon A Time
  8. Live & More
  9. Live & More
  10. Bad Girls
  11. Bad Girls
  12. On The Radio
  13. On The Radio
  14. The Wanderer
  15. Donna Summer
  16. She Works Hard For The Money
  17. Cats Without Claws
  18. All Systems Go
  19. Another Place & Time
  20. Mistaken Identity
  21. Christamas Spirit
  22. I'm A Rainbow
  23. I'm A Rainbow
  24. VH1 Presents: Live & More Encore!
  25. Crayons
  26. 7" Single Versions
  27. 7" Single Versions
  28. 12" Single Versions
  29. 12" Single Versions
  30. Remixes
  31. Remixes
  32. Non-studio Album Singles & Extended Mixes
  33. Non-studio Album Singles & Extended Mixes
 in stock $177.75
Doepfer A-140-2v Dual Micro ADSR Module (vintage edition)
Cat: 734880 Rel: 10 Jul 19 • View all Synth modules
 
Envelope module with two ADSR voltage controlled enevelope generators - 8HP
Notes: The module contains two ADSR type voltage controlled envelope generators with exponential curve shapes (charge/discharge curves of a capacitor) behind a front panel with 8 HP only.

Each ADSR provides these controls and in/outputs:

- LED (displays the envelope output)
- A: manual Attack control
- D: manual Decay control
- S: manual Sustain control
- R: manual Release control
- Gate Input
- Retrigger Input
- CVT Input with attenuator (CVT = CV Time)
- Envelope Output 1
- Envelope Output 2

The output voltage range for each envelope is 0 - 10V (10V = attack peak).

The time range of Attack/Decay/Release is about 1ms to 30s.

By means of internal jumpers one can select which time parameters are controlled by the CVT input (e.g. D only or D+R or A+D+R) and in which direction (i.e. if an increasing CVT shortens or stretches the time parameter in question).

Socket CVT can be normalled to an internal fixed voltage (i.e. the switching contact is connected to an internal fixed voltage). That way it's possible to change all time parameters simultaneously by means of the CVT control.

Another jumper is used to set output 2 to normal or inverted envelope.

And another jumper is used for the normalling of Gate 2 to Gate 1 (i.e. ADSR#2 is also triggered by Gate 1).

Two more jumpers are used for the optional bus access to the gate signal of the bus for each ADSR.
Read more
 4 in stock $161.39
Click for better price!
or call +44 20 7424 1960
quote 734880
Doepfer A-111-6v Miniature Synthesiser Voice Module (vintage edition)
Cat: 749811 Rel: 15 Nov 19 • View all Synth modules
 
Complete miniature monophonic synthesiser module - 10HP
Notes: VCO:

- Tune: manual tune control (with an internal jumper the range can be set to ~ +/-1 half an octave or ~ +/-2.5 octaves)
- Oct: range switch -1 / 0 / +1 octave
- Mod: modulation depth (attenuator wired to the Mod. socket)
- Dest: switch that is used to address the modulation to frequency modulation (position FM) or pulsewidth modulation (positon PM), in centre positon no modulation
- PW: manual pulsewidth control for rectangle waveform, PW can be also modulated by the Mod. input as mentioned above
- Wave: waveform switch (sawtooth / off / triangle), the sum of the waveform chosen by this switch and the rectangle is fed into the VCF (to turn the rectangle off the PW control has to be set fully CCW or fully CW)
- 1V/Oct. (socket): external CV input for VCO frequency (1V/octave)
- Access to internal bus CV (via jumper, optional, please remove the bus jumper if this feature is not used to avoid unwanted frequency modulation as then the unused CV line of the bus works as a kind of antenna)
- Triangle core VCO, frequency range about 32Hz ... 8kHz

Balance unit:

- The balance unit is made of two VCAs which are controlled by the sum of manual Balance control and the balance CV input in the opposite direction.
- The audio input of VCA1 is hard-wired to the VCO output, audio input 2 is connected to the socket Ext.In.
- The output of the balance unit is used as audio input for the VCF
- Bal.: manual balance control, fully CCW the internal VCO is used, fully CW the external signal (Ext.In) is used, at centre position both signals have about the same level
- CV Bal.: CV input for balance (range about 0...+5V)
- Ext. In: external audio input for VCA2, about 5 Vpp level required for similar loudness as the internal VCO
- This socket is normalled to the internal VCO suboctave f/2 signal (rectangle with half the frequency), if no external signal is applied the suboctave signal is used as the second signal for the balance unit

VCF:

- 24 dB low pass
- Frq: manual frequency control
- FM1: frequency modulation depth (attenuator wired to the VCF FM1 socket, the socket is normalled to the internal Envelope signal and then FM1 controls the modulation depth of the internal envelope applied to the filter)
- FM2 (socket) : second CV input for VCF without attenuator (about 1V/octave), can be used e.g. for VCF tracking by connecting the same CV which is used also for the VCO frequency
- Res: manual resonance control (up to self oscillation)
- If the VCO is turned off (waveform switch = centre position, pulsewidth control = fully CCW or CW) and the VCF resonance is set to maximum the module can be used as a sine oscillator, the tracking at socket VCF FM2 is about 1V/octave (not as precise as the VCO but much better than most other filters)
- ~ 11 octaves frequency range (~ 10 Hz ... 20kHz)

VCA:

- Gain: manual amplitude control (initial gain), can be used to open the VCA without envelope signal
- VCA (switch): used to switch between gate and envelope as control signal for the VCA, in centre position the VCA is not controlled by envelope or gate
- Note: when gate is used the VCA is controlled directly by the gate signal (i.e. hard on/off), this may lead to clicking noise under certain conditions (especially with low VCO/VCF frequencies)
- Special control scale: exponential scale in the range from about -20dB to -80/90dB, linear scale from about -20dB to 0dB
- Remark: this special control scale results in a loudness behaviour that is a bit different from pure linear or exponential VCAs
- Out: audio output of the module (= VCA output)

Envelope:

- Gate (socket): Gate input (min. +5V), can be normalled to the bus gate signal by means of a jumper
- Att: manual control for Attack
- D/R: manual control for Decay/Release
- Env. (switch): used to switch between A/D, ADSR and A/R mode of the envelope generator, in centre position (ADSR) the sustain level is fixed to about 50%
- Envelope (socket): envelope output (about +10V)
- CVT (socket): CV input for time control, by means of two internal jumpers one can select which time parameters are controlled by the CVT input (e.g. A only or D/R only or A/D/R) and in which direction (i.e. if an increasing CVT shortens or stretches the time parameter in question)
- Envelope LED display
- Attack time range: ~ 1ms ... 5 sec (can be extended by using the CVT input)
- Decay/Release time range: ~ 1ms ... 15 sec (can be extended by using the CVT input)
Read more
 3 in stock $187.56
Click for better price!
or call +44 20 7424 1960
quote 749811
Technics EAH DJ1200 Headphones Technics EAH DJ1200 Headphones Technics EAH DJ1200 Headphones Technics EAH DJ1200 Headphones
Cat: 763186 Rel: 23 Jan 20 • View all DJ headphones
 
DJ headphones
Notes: Latest version of the classic Technics DJ headphones, updating the classic RP-DJ1200 design, which sold more than half a million units in its lifetime. Solid stuff. Popular for a reason.

Supplier notes:
New-Standard EAH-DJ1200 DJ headphones with excellent functionality, furability, and DJ playing performance.

The EAH-DJ1200 is a successor model to the RP-DJ1200, which has sold more than 500,000 units since it was launched in 1996. While inheriting the basic concept of the previous model, the EAH-DJ1200 better meets the needs of today's DJ users, resulting in DJ headphones with more advanced functions, design and sound quality. In addition to ordinary listening, the EAH-DJ1200 provide precise monitoring of the beat even in large-volume sound environments such as those in clubs. The matte finish black colour design also makes it an excellent match for the SL-1200MK7 DJ Turntable.

The newly developed driver uses a 40mm-diameter CCAW voice coil. It achieves clear, detailed sound, and high-durability input (2,500 mW) with no distortion even at high volumes. Also, because the sound is well balanced from low to high ranges, DJ play in high-volume surroundings is not buried in noise and monitoring is comfortable.

The EAH-DJ1200 is a lightweight on-ear type design. The housing is equipped with lockable swiveling mechanisms so the headphones can be used for monitoring with one ear. It adapts to all styles of monitoring by DJs. The headphones can be folded compactly for easy portability and storage.

The detachable cord is easy to clean and maintain. A locking mechanism is provided to prevent accidental detachment of the cord during use. The stretchable coiled cord, coupled with the L-type plug which resists internal wire breakage, enables extra ease of use and high durability. It withstands harsh and intense usage by professional DJs.

Based on the RP-DJ1200, which remained as a long-selling model in the market for more than 20 years, the EAH-DJ1200 sports a contemporary black color scheme for an updated appearance. Armed with high durability and excellent functionality, the EAH-DJ1200 matches perfectly with the SL-1200MK7, which features a matte black finish.
Read more
 7 in stock $178.00
Electro Harmonix Oceans 11 Reverb Pedal
Cat: 691705 Rel: 25 Jun 18 • View all Effects pedals
 
Compact, affordable pedal packed with advanced functionality & eleven reverb styles
Notes: With 11 reverb types and a ton of "hidden" functionality, the Electro-Harmonix Oceans 11 reverb pedal could be your new go-to reverb pedal. You can tap into classic tones like hall, plate, and spring reverbs, including a brand-new spring reverb algorithm that sounds gloriously complex and rich - you can even double-tap the footswitch to "crash" the spring reverb. And you'll be able to cover a huge range of modern tones with a variety of modulated reverbs, shimmer reverb, reverse reverb, and more. A mode switch offers access to variations on many of the 11 reverb types. Complete with an infinite reverb mode for freeze-style effects, there is vast creative potential in the Electro-Harmonix Oceans 11 reverb pedal.

Reverb types:

Hall - rich and full sound of a grand concert hall
Spring - brand-new tube spring reverb emulation
Plate - lush and warm plate reverb
Reverse - each note fades in backwards
Echo - recirculates echoes through the plate reverb algorithm
Trem - hall reverb plus tremolo
Mod - modulated reverb
Dyna - swells, gates, and ducks in response to your playing dynamics
Auto-Inf - auto-infinite reverb, triggers a wash of reverb with each new note or strum
Shim - shimmer reverb with an octave-shifted wash that blooms behind your core tone
Poly - polyphonic reverb with two pitch shifts operating on your pre-reverb guitar tone
Read more
MRP:$184.51 SAVE 17%
 More than 10 in stock $153.76
Click for better price!
or call +44 20 7424 1960
quote 691705
Presonus AudioBox USB 96 Studio Recording Bundle (includes AudioBox 96 USB Audio Interface, M7 Condenser Microphone, HD7 Headphones & Studio One Artist 4 Software) Presonus AudioBox USB 96 Studio Recording Bundle (includes AudioBox 96 USB Audio Interface, M7 Condenser Microphone, HD7 Headphones & Studio One Artist 4 Software) Presonus AudioBox USB 96 Studio Recording Bundle (includes AudioBox 96 USB Audio Interface, M7 Condenser Microphone, HD7 Headphones & Studio One Artist 4 Software) Presonus AudioBox USB 96 Studio Recording Bundle (includes AudioBox 96 USB Audio Interface, M7 Condenser Microphone, HD7 Headphones & Studio One Artist 4 Software)
Cat: 705024 Rel: 10 Oct 18 • View all Audio & MIDI interfaces
 
All-in-one recording package featuring audio interface, microphone, headphones & software
Notes: Everything you need to record and produce:

Start recording today with this complete, all-PreSonus package! Based on the AudioBox USB 96 audio/MIDI interface and award-winning Studio One recording and production software, PreSonus AudioBox 96 Studio is great for creating multitrack recordings, demos, live recordings, podcasts, field recordings for video and sound effects, and much more.

AudioBox USB 96: Simple, reliable, and portable:

The AudioBox USB 96 is the heart of the AudioBox 96 Studio. This simple, handy little audio/MIDI interface has just the right features for basic recording needs, including two combo mic/instrument inputs and zero-latency monitoring, so you can simply plug in and start recording right away. Bus-powered, built to travel, compatible with most recording software for Mac and Windows, and equipped with high-performance microphone preamplifiers and professional-quality, 24-bit, 96 kHz converters, the AudioBox USB 96 makes high-definition recording easy.

Studio One Artist 4 makes recording a breeze:

No other entry-level recording and production software is this easy to learn and use, yet is capable of creating studio-quality output. Studio One Artist 4 lets you work quickly and stay focused on your inspiration, offers unlimited tracks and plug-ins, and delivers features not normally found in entry-level DAWs. Access powerful editing tools without wading through menus. Load and save audio clips, MIDI files, and effects by drag-and-drop. Studio One Artist 4 makes it easy!

Capture every nuance with the M7 condenser microphone:

Get your mic collection off to a good start with the M7 large-diaphragm condenser microphone. Condenser mics are the overwhelming choice of recording studio professionals, enabling you to capture musical details, harmonics, and subtle nuances that would get lost with dynamic mics. Large-diaphragm condenser microphones, like the M7, tend to "warm up" a sound, making them the go-to microphone for recording vocals and a wide range of instruments.

Hear every detail with HD7 professional headphones:

PreSonus' high-definition HD7 headphones take advantage of a patented, semi-open sound chamber to deliver exceptionally deep low frequencies with a balanced and yet powerful bass punch. Accurate midrange and extended treble response let you pick out the fine details of a mix or track. The lightweight, ergonomic design adjusts to any head size, offering a comfortable listening experience during long recording sessions.

Includes Studio Magic Plug-in Suite:

This suite of plug-ins adds a wealth of fresh sounds and effects to Studio One. Cherry-picked from the first names in virtual instruments and effects, each plug-in brings a different flavour of practical magic to your songs. These plug-ins aren't gimmicky one-trick ponies - these are real-deal workhorses that you'll rely on for countless mixes.
Read more
 9 in stock $160.49
Click for better price!
or call +44 20 7424 1960
quote 705024
Image Line FL Studio 20 Producer Edition Music Production Software
Cat: 685974 Rel: 19 Apr 18 • View all Music production software
 
Latest Producer Edition FL Studio software - with a lifetime of free updates!
Notes: FL Studio reaches a milestone, better than ever. Still a firm favourite DAW after all these years, ideal for dance music. Free update to the latest version 20.5, and every new version after that. Forever.

Supplier notes:
Image Line FL Studio 20 is everything you need in one package to compose, arrange, record, edit, mix and master professional quality music. FL Studio 20 is the fastest way from your brain to your speakers. Image Line FL Studio 20 Producer Edition provides the highest level of program functionality for FL Studio.

What you can do with FL Studio Producer Edition 20:

- Audio editing and manipulation including pitch correction, pitch shifting, harmonization, time-stretching, beat-detection & slicing, audio warping and standard audio manipulation (cut/paste etc).

- Automate most interface and all plugin parameters by recording, drawing, spline-based automation curves, automation generators with formula-based control of links.

- Be hosted in other DAWs as a VST or connected through ReWire.

- Live music performance including video effect visualization.

- Mix and remix audio including apply real-time audio effects including delay, reverb & filtering.

- Multi-track audio recording up to the limit of your audio-interface inputs.

- Record & play MIDI input recording from keyboards, drum pads and controllers.

- Sequencing and arranging with pattern and linear workflow possible.

- Synthesizer & effect plugin hosting VST 32 & 64 bit, DX and FL Native formats.

- Make virtually any sound - FL Studio includes over 30 software synthesizers covering acoustic/synthetic bass, electric guitar, multi-sampler tools including piano & strings, general sample playback and beat-slicing (With Rex 1 & 2 support).
- Synthesis techniques - span subtractive, modelling, FM, RM, granular and additive. With the addition of FL SynthMaker you can further create & share your own FL instruments, effects & MIDI control dashboards without the need to write basic code.

- Open plugin standards - FL Studio supports all PC industry plugin instrument standards including VST, DX, Buzz and Rewire. This means you can sequence with your favourite plugins and applications.

- Multi-channel audio inputs - With the ability to simultaneously capture all the inputs on your audio-interface, FL Studio has the flexibility to record a single vocalist, guitar or a full symphony orchestra.

- Arranging audio - Audio can be arranged, with complete freedom in the Playlist. Features include the ability to host an unlimited number of audio recordings, time-stretching, pitch-shifting, beat-slicing, cropping, editing and the re-arranging of audio with only a few mouse clicks.

- Pattern or track sequencing - You choose, record your musical performances and ideas in the most logical way. FL Studio 20 can simultaneously function as a pattern and track based sequencer. Reuse patterns as Pattern Clips in the Playlist or record song-length sequences, as desired.

- Step sequencer or Piano roll - Scoring tools include FL Studio's legendary Step-sequencer, one of the most advanced Piano rolls in any software studio, event and multipoint automation envelopes. FL Studio supports MIDI input, standard controller compatibility, and the ability to simultaneously control multiple instrument channels from separate controllers.

- Determine your own project design - In FL20, you decide how your project will be laid out, including multiple 'Arrangements'. Unlike the competition, FL20's Playlist is a totally flexible and virtually unbounded workspace where Note Pattern, Audio and Automation data can be arranged and edited to suit your creative ideas and preferred workflow.

- The mixer - is about precision, control and flexibility. The mixer's tracks each hold up to 10 effects (VST or FL's proprietary format). To create sub-mixes or mixing chains of almost unlimited complexity, each mixer track can be routed to any other mixer track or the Master track. Sends provide the ability to sidechain inputs to multi-input effects plugins. Finally, each of the mixer tracks can be routed to any output on your audio interface, now that's flexibility.

- Effects - What about effects? FL Studio includes more than 40 effects spanning maximization, limiting, compression, delay, distortion, equalization (graphic & parametric), filtering, phasing, flanging, chorus, vocoding and reverb. These have you covered for the creative broad-brush effects, through to the minutia of the mastering process.
Read more
 7 in stock $155.41
Erogenous Tones LEVIT8 Attenuator Gain Inverter Mixer Utility Module
Cat: 644210 Rel: 06 Apr 17 • View all Synth modules
 
High density 8 channel utility module - 10HP
Notes: Levit8 is a high density utility module designed to give you a large number of attenuator/gain functions along with optional mix, invert, DC offset and polarity indication for incoming signals.

Few modules can beat the LEVIT8's high density of functions, which has eight channels that can be used as individual attenuators, amplifiers, inverters of offset generators. Optionally it features three different mix configurations with four or eight inputs for control voltages or audio signals, fulfilling various tasks at the same time.
Read more
MRP:$214.61 SAVE 22%
 More than 10 in stock $167.93
Click for better price!
or call +44 20 7424 1960
quote 644210
The Complete Fontana Albums 1961-1969 (remastered)
The Complete Fontana Albums 1961-1969 (remastered) (limited numbered 180 gram 11xLP box set + booklet + inserts + photos)
Cat: 774391 6. Rel: 26 Jun 20
 
Jazz
  1. Tubbs (LP1)
  2. From (Costanzo Plus Tubbs) Equation In Rhythm LP/From Palladium Jazz Date LP (B-Side) (LP2)
  3. Tubbs In NY (LP3)
  4. Return Visit! (LP4)
  5. Late Spot At Scott's (LP5)
  6. Down In The Village (LP6)
  7. Tubbs' Tours (LP7)
  8. 100% Proof (LP8)
  9. Mexican Green (LP9)
  10. Grits, Beans & Greens: The Lost Fontana Studio Sessions 1969 (LP10)
  11. The Orchestra (LP11)
 in stock $196.28
Sennheiser HD300 Pro Studio Headphones Sennheiser HD300 Pro Studio Headphones Sennheiser HD300 Pro Studio Headphones Sennheiser HD300 Pro Studio Headphones
Cat: 700731 Rel: 29 Aug 18 • View all Studio headphones
 
High-resolution professional monitoring headphones
Notes: Beautiful closed-back headphones from Sennheiser, ideal for critical listening and mix applications. Not the cheapest, but sound on par with much more expensive options.

Supplier's notes:
The newly developed HD 300 PRO delivers a neutral, high-resolution working sound. Its huge depth of detail passes through even in the loudest of environments. Irrespective of whether you are editing, playing or composing music, and regardless of whether you're behind a drum kit, at the mixing desk, in a live setting or in the studio, the HD 300 PRO provides the details that you need for making good decisions.

The HD 300 PRO works at the same level of precision that you apply to your production. To make this possible, we have pushed its acoustic properties to the boundaries of physics and recalculated them. Firstly, it's linear frequency response. It doesn't interpret, but rather ensures neutral transparency - the basis for good decisions. Its sound pattern remains delicate and precise in every application - across the entire spectrum.

Secondly, we have reduced distortion, wobbling motions and partial vibrations of the diaphragm to a minimum. Together with highly sensitive transducers, this construction guarantees powerful and distortion-free reproduction even at high sound pressure levels. Not to mention the recalculated air volumes in front of the ear. The HD 300 PRO gives the sound a remarkably natural, three-dimensional quality.

The design of the HD 300 PRO represents a smart combination of wearing comfort and ambient noise attenuation. Its circumaural, viscoelastic earpads can barely be felt even after several hours. And they provide reliable protection even against very loud ambient noise. To achieve this, we have designed the acoustic unit to be more isolated than a monitoring set has ever been. Even after sessions lasting several hours, you will detect only its sound - not its weight.

What's in the box?

1 x HD 300 PRO headphones
1 x Cable (1.5m with 3.5mm jack)
1 x 1/4" Adapter jack
1 x Quick start guide
Read more
MRP:$234.24 SAVE 30%
 2 in stock $164.73
Click for better price!
or call +44 20 7424 1960
quote 700731
Doepfer A-141-4 Quad Poly VCADSR Module
Cat: 676693 Rel: 18 Jul 18 • View all Synth modules
 
Quad voltage controlled envelope generator - 8HP
Notes: A-141-4 is a quad voltage controlled Envelope generator and is primarily planned for polyphonic applications. The module contains four ADSR type voltage controlled envelope generators with common manual controls and CV inputs with polarizers for the all parameters Attack (A), Decay (D), Sustain (S) and Release (R). Each of the four envelope generators has available a gate input, a control LED and an envelope output.

The module has these controls and in/outputs are available:

- Attack (manual control)
- Decay (manual control)
- Sustain (manual control)
- Release (manual control)
- CVA control (polarizer for Attack CV input)
- CVD control (polarizer for Decay CV input)
- CVS control (polarizer for Sustain CV input)
- CVR control (polarizer for Release CV input)
- CVA socket (Attack CV input)
- CVD socket (Decay CV input)
- CVS socket (Sustain CV input)
- CVR socket (Release CV input)
- Gate inputs 1 - 4
- Envelope outputs 1 - 4
- LED displays 1- 4 (envelope display)

The output voltage range for each envelope is 0 - 10V.
Read more
 2 in stock $151.58
Click for better price!
or call +44 20 7424 1960
quote 676693
Mutable Instruments Grids Topographic Drum Sequencer Eurorack Module
Cat: 569556 Rel: 03 Mar 16 • View all Synth modules
 
Topographic drum sequencer module - 16HP wide
Notes: Take the user interface of an euclidean sequencer, a healthy dose of machine learning and graph algorithms, megabytes of drum loops, hours of intensive computations and you've got a drum pattern generator like no other.

Grids' "brain" is a map of the typical drum patterns used in (mostly electronic) music, laid out by similarity, trained on a large corpus of drum loops. The module can smoothly interpolate and navigate from one pattern to the other, at the whim of a knob move or a CV.

But Grids' knowledge of drum patterns goes far beyond what would be achieved with presets - given a position in the map, thousands of variations can be intuitively generated by controlling the "event density" of each of the 3 channels (bd, sd, hh) - gradually moving from a sparse backbone to a deliciously rich pattern with ghost notes, rolls and fills.

Add CV-control on these parameters and you can add subtle or drastic variations to the drum pattern. If you don't want to waste a noise source or S&H for that, Grids has its own internal source of randomness that can unpredictably spice the pattern, in an always meaningful way.

Building the rhythmic foundation of your tracks with Grids is fun, surprisingly intuitive, with modulation and variations possibilities that will rapidly make you forget x0x-style sequencers.

*For audio demos, please visit - http://mutable-instruments.net/modules/grids
Read more
 More than 10 in stock $161.39
Native Instruments Komplete Audio 6 MK2 Audio & MIDI Interface Native Instruments Komplete Audio 6 MK2 Audio & MIDI Interface Native Instruments Komplete Audio 6 MK2 Audio & MIDI Interface Native Instruments Komplete Audio 6 MK2 Audio & MIDI Interface Native Instruments Komplete Audio 6 MK2 Audio & MIDI Interface
Cat: 732328 Rel: 10 Jun 19 • View all Audio & MIDI interfaces
 
Premium 6-channel audio interface featuring high resolution audio recording
Notes: The updated Komplete Audio 6 is one of our favourite interfaces, packing six-in, six-out audio connectivity and MIDI into a neatly designed, stylish box with handy level control.

Supplier's notes:
Connect, create, and collaborate with our six-in, six-out audio interface. Featuring high-definition recording, ultra-low latency, and flexible connectivity, AUDIO 6 brings your whole setup together. You can plug in mics, guitars, and synths, create send and return loops with effects, and control synths and drum machines. Plus, you get all the software you need to capture performances, build songs, and polish recordings - bring any idea to life.

Whether recording your next album or gigging your latest release, your focus should be on creating at your best. With pro-grade sound, gig-ready portability, and plug-and-play simplicity, AUDIO 6 lets you do just that.

AUDIO 6 works with all your mics, instruments, and headphones. You've got a choice of connections and features: 48V phantom power, MIDI in/out, and four analogue outputs with additional CV/gate control for your analogue gear. Plus, easy-to-see top panel LED VU-meters for all four analogue inputs and the main stereo output.

Whether you're a solo performer, duo, or a full band, the AUDIO 6's pristine audio quality lets you sound as good on stage as in the studio. Turn your laptop into a live rig or vocal processor, with flexible connections to fit any performance. USB bus-power means fewer cables and power supplies, plus a big volume knob on top lets you make easy level adjustments while on stage.

Two high-power headphone outputs, with individual level controls, make it easy to collaborate. Hear exactly what you're recording, in real-time, with latency-free direct monitoring that lets you blend playback and monitored audio to your liking. We've also doubled their output power - great for stage use or high-impedance headphones.

Whether at a small band session or a freewheeling modular synth jam, having a flexible set of connections lets you bring your ideas together and capture music in the moment. XLR, TRS, S/PDIF, and MIDI aren't just letters, they're ways to make music happen - and we've put these connections right where you need them.
Read more
MRP:$247.33 SAVE 26%
 3 in stock $182.12
Click for better price!
or call +44 20 7424 1960
quote 732328
Presonus Faderport MK2 USB Controller Presonus Faderport MK2 USB Controller Presonus Faderport MK2 USB Controller Presonus Faderport MK2 USB Controller
Cat: 695711 Rel: 09 Oct 18 • View all MIDI controllers
 
USB control surface featuring new design for easier & faster control of your DAW
Notes: Bring hands-on control to your software with Presonus' simple little USB controller. Physical transport controls and a nice long fader to help streamline your creative process in your DAW.

Supplier's notes:
The latest generation of PreSonus classic USB control surface, the FaderPort enables you to record and mix with a smooth, touch-sensitive, motorized, 100 mm fader; transport controls; and many of the new workflows introduced in the FaderPort 8 and 16. Manage markers, punch in and out with a footswitch (not included), arm tracks, and employ the innovative Session Navigator to control your favourite DAW application quickly and easily. The FaderPort connects via USB 2.0 and offers native control of PreSonus Studio One DAW (Studio One Artist is included), including Control Link support and parameter follow, allowing quick hardware access to any control.
Read more
 3 in stock $168.21
Click for better price!
or call +44 20 7424 1960
quote 695711
Mooer Ocean Machine Delay Reverb & Looper Pedal Mooer Ocean Machine Delay Reverb & Looper Pedal Mooer Ocean Machine Delay Reverb & Looper Pedal Mooer Ocean Machine Delay Reverb & Looper Pedal
Cat: 666629 Rel: 18 Oct 17 • View all Effects pedals
 
High-fidelity delay, reverb & looper unit
Notes: Designed and developed over two years, in collaboration with Devin Townsend, the Ocean Machine is a high fidelity professional Delay, Reverb and Looper unit which brings together the best available hardware on the market and very complex algorithms to create lush, heavenly effects. MOOER has worked very closely with Devin Townsend to meet all of his own personal requirements while also ensuring that the "Ocean Machine" is versatile and enjoyable for musicians from all walks of life.

A multitude of programmability and control options makes the ocean machine ideal for all different kinds of guitarists from bedroom beginners to industry professionals and is easy to integrate into all different kind of setups. MOOER has brought all of this together into a small, stylish and highly competitive, cost efficient package.
Read more
 6 in stock $194.10
Noise Engineering Lapsus Os Four Channel Attenuator/Attenuverter & Offset Module (silver faceplate)
Cat: 711980 Rel: 13 Dec 18 • View all Synth modules
 
Attenuator & offset generator designed for control voltages - 8HP
Notes: Lapsus Os is a four channel attenuator/attenuverter and offset. Designed with performance in mind, each channel can be set to either attenuate or attenuate/invert an incoming signal, adjust offset of an incoming signal, or with nothing patched to its input, generate a 0-5v or +/- 5v offset. Switches on the back of the module invert the fader behaviour, allowing for the module to be mounted in either direction, for further customization and ease of use.
Read more
MRP:$181.90 SAVE 17%
 4 in stock $150.48
Click for better price!
or call +44 20 7424 1960
quote 711980
WMD Voltera Voltage Expander For Metron Module
Cat: 742232 Rel: 16 Dec 19 • View all Synth modules
 
4HP voltage expander module for the METRON trigger & gate sequencer
Notes: Expander for WMD's Metron, a 16-channel trigger and gate sequencer module. Adds four tracks of voltage sequencing per module, turning the Metron into an even more powerful sequencer

Supplier notes:
Voltera is a voltage expander module for the METRON trigger and gate sequencer and adds 4 bipolar voltage tracks in 4hp. Up to 16 Volteras can be added to a single METRON giving you up to 64 CV Sequencing lanes for your Eurorack modular system!

With independent voltage ranges and quantize settings per track, Voltera allows for real time control over 4 different parameters at once, allowing you to dial that track to the parameter you are sequencing.

Sequence melodies, modulate parameters, and more with ease by adding Voltera to your METRON set up.
Read more
MRP:$242.09 SAVE 24%
 6 in stock $183.19
Click for better price!
or call +44 20 7424 1960
quote 742232
WMD Time Warp Dual Channel Gated Slew Module (black faceplate)
Cat: 771732 Rel: 20 Apr 20 • View all Synth modules
 
slew module
Notes: Compact dual slew module adds slide/glide to sequences in a compact format. Includes some nice added features allowing it to work as an envelope or envelope follower.

Supplier notes:
The acid style pitch slew effect has made it to Eurorack in a small easy to use package. You no longer need to dedicate more complicated modules patched in wacky ways to achieve this classic sound. Finally, a dual slew, with the right interface, at the perfect size. Add some slide and smoothness to your patches on your own accord with Time Warp.

TIME WARP is a dual channel, gated slew module with some extra features that make a powerful and versatile addition to any Eurorack Modular Synthesizer System.

Its unique, Gated Slew function allows users to add slew to any voltage signal at designated times by sending it a gate signal from a sequencer or similar source. Switch it up with Invert Logic on the gate input, or use the switch as a real time performance tool for hands-on control over when the slew will take place.
With two modes of symmetry and a full wave rectifier on the input, Time Warp can function as 2 independent Slews, two A/R Envelopes with tied controls, or even as an envelope follower, taking audio and turning it into a useful envelope signal. CV control over the Rate of slew! Time warp puts all of that in a compact, 4hp package.

Size: 4hp (20.32mm)
Depth: 30mm(with cables)
Power: 50mA +12V, 50mA -12V

Gate Inputs:
100k ohm impedance
2V threshold Schmitt Trigger
Patching into the Gate input disables the Full Wave Rectifier

CV Outputs:
470 ohm impedance, zero-impedance compensating buffer
1V/Octave no drop
22Vpp range
Gain error: 0.1% maximum. 0.025% typical.
Offset error: 1.5mV maximum. 0.5mV typical.

Regulatory:
RoHS, CE, & WEEE Compliant
Made with Lead Free solder and processes
Read more
MRP:$208.07 SAVE 17%
 1 in stock $172.29
Click for better price!
or call +44 20 7424 1960
quote 771732
Focal Listen Professional Closed Back Studio Headphones Focal Listen Professional Closed Back Studio Headphones Focal Listen Professional Closed Back Studio Headphones Focal Listen Professional Closed Back Studio Headphones
Cat: 677372 Rel: 28 Mar 18 • View all Studio headphones
 
Premium closed-back circum-aural portable headphones with carry case
Notes: Listen Professional circum-aural closed back headphones are the essential work tool for music production. Their tonal balance and precision in terms of audio spectrum make them perfect to evaluate the sound work quality. In addition, their comfort and accessories will make them very attractive for people travelling on business trips. The sound quality and the dynamics of these headphones are very surprising considering that this quality is usually found on more expensive items. The attention to detail of these headphones can be also shown thanks to the various patents and technologies which belong to Focal. Hence, a brand-new driver membrane was developed. The main goal was to propose a solution which would keep all the dynamics from the original track while reproducing accurately every single detail on the whole audio spectrum. Even if Listen Professional headphones are closed, they produce a very lively sound, giving the feeling of semi-open headphones while still providing the isolation of closed headphones.

Focal's core expertise:

The speaker driver has been given a 100% Mylar suspension, whereas the central dome is composed of a Mylar-titanium alloy to provide more rigidity and extended frequency response in the upper end of the spectrum. Thus, the moving part is extremely light, enabling the transducer to exceed 40kHz on a flat baffle. The reproduction of the bass and sub-bass registers also received a great deal of attention. The team of engineers managed to combine two factors which are hardly compatible: a tuning frequency which is as low as possible and extremely low distortion (0.3% at 1kHz - 100dB).

Ear cushions - the ideal acoustics:

The size of the ear cushions (height, width and depth) gives them a volume which makes it possible to achieve a great tonal balance. Microfiber provides a more linear bass response providing a better acoustic output, whereas the acoustic tissue, which is closer to the speaker driver, offers great absorption and linearity in the 3-9kHz register. The bass and lower mid-range sections benefit from remarkable tonal balance and excellent articulation: where compression and frequency response generally suffer on closed-back headphones.

For a frequent and intensive use:

Listen Professional is also equipped with a headband boasting a unique design to ensure comfort and durability. Its curve remains consistent, regardless of the shape or size of the user's head. Combined with the layer of silicone underneath the headband, this ensures that the weight is spread out evenly over the head, preventing the user from feeling any pressure in certain areas, which can be very uncomfortable during long working sessions. The horizontal and vertical rotation of the ear cups operate thanks to one single part: a joint integrated into each one. The ear cups also feature a black structured covering, making them resistant to impacts and scratching.

Provided Accessories:

Rigid carrying case. Thermoformed shell in the shape of the headphones. Can store one cable and an iLok key (not provided), all within its compact dimensions. Two OFC copper 24AWG cables with a very low resistance.

- 5m spiral for domestic use
- 1.2m cable fitted with a 3.5mm stereo jack connector
- 3.5mm and 6.35mm jack adapter
Read more
MRP:$260.41 SAVE 35%
 7 in stock $169.02
Flame C3 MkII Knob Recorder Module
Cat: 731956 Rel: 16 May 19 • View all Synth modules
 
3-channel module for recording & playing back movements of controllers - 6HP
Notes: The FLAME "C-3 MK2" is a three-channel module for recording and playing back movements of controllers. These can be recorded with each channel's individual knob. The movements will be output as control voltages. The recording time per track is over one minute. The playback speed is adjustable. All three tracks have a common reset input. The track data remains permanently stored (battery-backed memory). The module can be globally switched to bipolar or unipolar voltage range (switch on the PCB).
Read more
 3 in stock $154.85
Kali Audio Lone Pine Series LP6 Powered Studio Monitor (white, single) Kali Audio Lone Pine Series LP6 Powered Studio Monitor (white, single) Kali Audio Lone Pine Series LP6 Powered Studio Monitor (white, single) Kali Audio Lone Pine Series LP6 Powered Studio Monitor (white, single) Kali Audio Lone Pine Series LP6 Powered Studio Monitor (white, single) Kali Audio Lone Pine Series LP6 Powered Studio Monitor (white, single)
Cat: 754475 Rel: 31 Oct 19 • View all Studio monitors
 
LP6 powered studio monitor
Notes: Kali Audio's Lone Pine Series studio monitors are designed to allow you to hear every detail that's happening in your mix.

This starts with an exceptionally accurate frequency response. Whatever is present on your mix is what you'll hear in these monitors. Nothing is boosted or suppressed to cover flaws or try to sound more pleasing.

With the LP-6 and LP-8, you can mix with more confidence, and you can also be assured that your mix will translate as best as possible to whatever systems your audience is using.
Read more
MRP:$208.07 SAVE 28%
 More than 10 in stock $150.48
Korg Volca Modular Micro Modular Synthesiser Korg Volca Modular Micro Modular Synthesiser Korg Volca Modular Micro Modular Synthesiser Korg Volca Modular Micro Modular Synthesiser Korg Volca Modular Micro Modular Synthesiser Korg Volca Modular Micro Modular Synthesiser
Cat: 715950 Rel: 18 Feb 19 • View all Synthesisers
 
Compact patch-based synth, ideal for beginners
Notes: Buchla-inspired modular business in Korg's small and affordable Volca range. Amazingly creative and experimental synth power in a tiny little box. Highly recommended.

Supplier's notes:
A semi-modular analogue synthesizer that makes modular synthesis more accessible and understandable than ever before.
Creating new sounds that don't exist in the outside world is an unending dream which has continued since the birth of electronic musical instruments. This dream has evolved and expanded throughout the development of new and unique music production devices.

The popularity of modular synthesizers around the world has generated new excitement and interest in the so-called "West Coast style" of synthesis that deviates from traditional synthesis norms.
The compact body of this volca synth features eight modules and 50 patch points. While learning the basics of a modular synth, you can use popular features of the volca synthesizer line to control a unique and different flavour of analogue sounds.

Eight modules:
The volca modular is a semi-modular synthesizer consisting of independent analogue synth modules, digital effects, and a sequencer. Each of the modules has been carefully selected for its stand-alone completeness. The modules are internally connected so that sound can be produced even before connecting the included pin cables, and the routing is shown by white lines on the panel. Module connections via a pin cable take priority over the internal connections, bypassing them.

A fusion of West Coast style in a volca format:
Analog synthesizers in which a simple oscillator such as a saw wave or square wave is modified by a filter are referred to as "East Coast style" because of their origin from well-known American manufacturers. Synths of this style, as exemplified by the MS-20, have continued to evolve toward a goal of being used in many mainstream musical genres, thus being equipped with a keyboard for performance. Their sounds are notable for sharp filters and rich presence, and can be heard in many well-known songs.

Patching allows infinite possibilities:
volca modular's modules are connected via the included pin cables, allowing a diverse range of combinations. The unit's compact chassis provides 50 patch points. Inputs and outputs are color-coded for recognition at a glance, and the signals are also marked by symbols to indicate audio, control, gate or trigger. Normally, each signal is connected according to its use, but on the volca modular, signal levels are universally compatible between modules, allowing hidden possibilities to arise from patching that defies common sense. Twenty pin cables are included, and also included is a reference sheet explaining each patch point and providing basic examples of patching.

Sixteen-step sequencer that can automate parameters:
While the volca modular is a semi-modular synth, it is equipped with a full-fledged 16-step sequencer providing a wide range of functions, letting you enjoy automatic performance even when used stand-alone.

Using the 16 buttons familiar from the volca series, you can perform step input or use the buttons as a keyboard for realtime recording. The pattern chaining function plays back multiple sequence patterns in succession, allowing you to connect up to 16 sequences with up to 32, 64, or even 256 steps to create large-scale development.

Randomize function that can generate accidental ideas:
The sequencer of the volca modular lets you specify randomization for notes, active steps, and micro tuning. Irregular phrases, rhythms, and scaling that would be unlikely to come to mind can be generated by applying randomness, letting the volca be a source of unknown ideas.

Two new modes added for sequence playback:
Two new sequence modes have been added: bounce sequence mode which makes a round trip through the steps, and stochastic sequence mode which gradually proceeds while randomly moving forward and backward. Playing back a recorded sequence in a different form can add dramatic changes to your song or performance.

Musically advanced scales, keys, and micro tuning:
Although the volca modular is a West Coast style synthesizer, it also provides flexible support for music as a contemporary instrument. You can choose from 14 types of scale including equal temperament. Since you can also specify the tonic key from which these scales start, you can play these scales in any key.

Connectors that allow synchronized performance and external control:
With a sync jack that allows easy connection to a Korg groove machine, you can connect the volca modular to another volca series unit, a minilogue, monologue, or prologue, an electribe, or the SQ-1, and enjoy sessions with the sequencer synchronized to the playback.
Read more
MRP:$234.24 SAVE 34%
 2 in stock $155.75
Click for better price!
or call +44 20 7424 1960
quote 715950
Behringer NX3000 Class D Power Amplifier (3000W) Behringer NX3000 Class D Power Amplifier (3000W) Behringer NX3000 Class D Power Amplifier (3000W) Behringer NX3000 Class D Power Amplifier (3000W)
Cat: 699339 Rel: 25 Oct 18 • View all PA amplifiers
 
Class-D amplifier with 3000 watts output
Notes: The NX range of power amplifiers pack large Wattages into exceptionally lightweight and rack-mountable packages. And because the NX range is so much more efficient than conventional designs, they run cooler and don't require the massive heat sinks and heavy toroid transformers typically associated with their conventional counterparts. Thanks to our 'Zero-Attack' limiters that offer maximum output level with exceptionally-reliable overload protection and SmartSense Loudspeaker impedance compensation, which provides fully linear frequency response at any speaker load impedance, you can run the NX range full-out for hours on-end. Our revolutionary high-density Class-D technology, combined with an ultra-efficient, switch-mode power supply ensure these feather-light powerhouses will drive your rig effortlessly for many years to come.

Thanks to our High-Density Class-D amplifier Technology, we are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment.

The front panel controls and indicators provide your systems vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as Limit LEDs to indicate when the amplifier is running at full capacity. Just as elegant as the front, the rear panel is home to the combo XLR and 1/4" TRS Input connectors, making the NX range compatible with virtually any source, balanced or unbalanced. Professional twist-lock speaker sockets are provided to ensure every drop of output power gets to your loudspeakers.

The rear panel is also where you'll find the switches that enable the NX amp range to run in your choice of dual mono, stereo or mono bridge modes. The ranges built-in Crossover switch sets the amp to Full-Range mode, where the output is sent unfiltered to your loudspeakers, or Bi-amp mode, which sends only the low-frequency content (<100 Hz) to passive subwoofers, while the high-frequency content (>100 Hz) is channelled to your full-range loudspeakers.

Our new SmartSense Technology puts the punch back into Class-D amplification, providing vastly improved full-range frequency response with more powerfully-dynamic bass, and smoother high-frequency reproduction. The resulting output is no longer dependent on the actual load, but is rendered perfectly ruler flat via impedance compensation. NX's design also incorporates a significantly-higher damping factor that yields better amplifier control over the loudspeaker for stronger audio reproduction especially in the LF area.

Sporting massive output ratings, lightweight Class-D technology and an equally lightweight price tag plus all the amenities a professional audio engineer could ask for the BEHRINGER NX range of power amplifiers are serious amps for your most demanding applications.
Read more
 More than 10 in stock $179.93
Doepfer A-132-8 Octal Poly VCA Module
Cat: 676692 Rel: 18 Jul 18 • View all Synth modules
 
Octal VCA module containing four VCA pairs - 8HP
Notes: A-132-8 is an octal VCA and primarily planned for polyphonic applications. The module contains four VCA pairs. Each pair includes two daisy-chained VCAs. One VCA has a linear control scale, for the second VCA linear or exponential control scale can be chosen by means of jumpers. We decided to provide two VCAs for each voice because usually one VCA is required for loudness envelope and a second one for velocity (or other functions like individual voltage-controlled loudness of each voice, amplitude modulation and so on).

These controls and in/outputs are available:

- Default Gain 1 (GL)
- Default Gain 2 (GX)
- CV Input VCA 1
- CV Input VCA 2
- Audio Input
- Audio Output

In addition, an Audio Sum Output is also available.

The module features two Default Gain controls (GL, GX), that enable the opening of the first VCAs (L) and/or second VCAs (X). For this the controls GL and GX generate two internal control voltages 0...+10V which are connected to the switching contacts of the sockets 1L...4L (control GL) and 1X...4X (control GX). As long as no patch cable is inserted into the socket in question the internal default control voltage (GL or GX) is used to control the corresponding VCA. This is necessary when the VCA in question is not in use (i.e. no external CV available). Otherwise the VCA would close and there would be no output signal even if the other VCA in the chain is open. The controls GL and GX are also useful for testing polyphonic patches (e.g. for tuning the VCOs).

In the factory the CV inputs are adjusted for a CV range 0...+10V - matching to the polyphonic ADSR module A-141-4. But the sensitivity of each CV input can be adjusted by means of a trimming potentiometer to adapt the CVs even to other control voltage ranges.
Read more
 5 in stock $153.75
Click for better price!
or call +44 20 7424 1960
quote 676692
Mutable Instruments Ripples Liquid Filter Eurorack Module
Cat: 569573 Rel: 23 Sep 15 • View all Synth modules
 
Liquid filter Eurorack synth module
Notes: Ripples delivers a classic, big-sounding analog four-pole filter in a small 8-HP package, continuing Mutable Instruments' lineage of warm and tasty filters started by the Shruthi SMR4 mkII and 4-Pole Mission.

3 filter modes are available: 2-pole band-pass, 2-pole low-pass, and 4-pole low-pass.

Self-oscillation is available for all modes and produces a clean sine-wave on the LP4 output. Unlike many classic 4-pole designs, this filter does not suffer from "loudness drop" when resonance is increased. The resonance loudness compensation circuit brings a slight tone coloration reminiscent of the Roland SH/Jupiter filters, with a very round and "liquid" resonance.

The 4-pole low-pass output is additionally sent to a VCA. This makes Ripples a good "final stage" module for an inexpensive/space-constrained subtractive synthesis synth voice.

*For audio samples, please visit - http://mutable-instruments.net/modules/ripples
Read more
! low stock $161.39
Pioneer HDJ X7 DJ Headphones (silver) Pioneer HDJ X7 DJ Headphones (silver) Pioneer HDJ X7 DJ Headphones (silver) Pioneer HDJ X7 DJ Headphones (silver) Pioneer HDJ X7 DJ Headphones (silver) Pioneer HDJ X7 DJ Headphones (silver) Pioneer HDJ X7 DJ Headphones (silver)
Cat: 662207 Rel: 04 Oct 17 • View all DJ headphones
 
Professional over-ear DJ headphones - silver
Notes: The mid-range model in Pioneer's DJ headphone line-up, the HDJ-X7s are a classic over-ear design with all the sound quality, durable build and comfort you'd expect at this price point.

Supplier's notes:
Step up your booth game with the HDJ-X7. We've listened to feedback from DJs and improved on our previous professional DJ headphones. With newly developed drivers, the HDJ-X7 model gives you clean monitoring even at high volumes. The independent ground wire in the 4-core twisted-structure cable ensures superior left and right channel separation, while the flexible headband means your headphones will be a perfect fit.

The HDJ-X model headphones are designed to be flexible. Their swivel mechanism allows you to wear them comfortably, whichever way you prefer, for long periods of time. No need to worry about bumps and knocks during transport as these DJ headphones can handle severe conditions and heavy use. They even cleared the US Military Standard Shock test.

Outstanding sound:
Thanks to the newly developed 50-mm driver, sound is always crystal clear. Add to that the tight bass notes from the optimised diaphragm, a cable with superior left and right channel separation and the bass reflex chamber, all enabling professional monitoring.

Rigorously tested:
Even on the road, your headphones will handle severe conditions and heavy use. Durable metal is used in the moving parts, enabling a strong construction that cleared even the US Military Standard Shock test.

Comfortable fit:
These headphones are comfortable to use no matter how you wear them. The housing design reduces pressure on your head, while its outside texture enhances grip. To help you find the perfect fit, they also feature a flexible, durable headband and a flexible swivel.

Solid, refined design:
All the HDJ-X headphones feature a refined look and durable construction. Choose from black or silver versions to complete your desired look.
Read more
 3 in stock $175.57
Click for better price!
or call +44 20 7424 1960
quote 662207
Items 1 to 50 of 415 on page 1 of 9
1  2  3  4  5  6  7  8  9  »

Filter

Saved Searches
Save current search
Release Date
Close