Search dance music

Notes: Soft over-ear memory foam cushions covered with PU leather. The thickness and materials provide better comfort and excellent isolation. Adding a low end boost for a warmer sound with powerful dynamics.

Notes: Ultra soft over-ear memory foam cushions covered with Alcantarar, an aesthetic, functional, and CO2 neutral material. Highly comfortable and ideal for longer listening sessions. Provides a spacious, open sound with low isolation.

Notes: High comfort headband with memory foam and head padding covered with PU leather for longer sessions.

Notes: Engineered with a 40mm speaker diaphragm made from stiff bio-cellulose to reduce distortion and increase transparency. Tuned for a balanced, accurate sound. Balanced sound - Bio-diaphragm.

Notes: Engineered with a 40mm speaker diaphragm made from stiff bio-cellulose for more defined high-frequency details, more pronounced mid-range, better dynamics, and more natural tonality.

Notes: This stand its part of a new concept in COVERUP. With differents parts, you can use to put on multiple synths, including big devices, until now, not possible with the other stands.

You can configure your setup with you like more, with two big devices, or three medium devices. Easy to ensamble, very light to move from your studio to live. Just you need 1 minute to arm and start to playing.

Your setup of synthesizers and studio equipment can change permanently and with it also the position on the work table.

Taking this into account, CoverUp developed a 3-level support, which can be set up in different ways depending on the number of machines that we are going to place and their size.

In the triple stand configuration (using all 4 parts), 3 20cm machines can be placed. deep and a maximum height of 7cm.

This space is enough for much of the hardware available today.

The triple bracket parts are assembled with screws (included) using a universal socket that holds them together firmly.

In turn each part can be used as a simple support. It is only enough to separate the parts by removing the screws and use each part as it suits us.

Each part has rubber feet underneath, so that the support does not slip and is firmly supported.

Both halves of the triple support are linked with wooden rods at various points to give it lateral stability.

The design contemplates space for the rear connectors of each equipment, so that none of them are obstructed by the support.

Measures:
Depth: 58cm
Height: 41cm
Width: 34cm

Notes: The model 230 double support is designed to house two large pieces of equipment, with the ability to improve the operating position of both.

In each position of the bracket, a 30cm piece of equipment can be placed. deep, such as Maschine MK3 and Maschine Jam.

This double support in turn allows it to be used as two simple supports. Simply unscrew the front half from the back.

At the same time, it saves a lot of space on the surface, ideal for optimizing the space in our studios.

The width is adjustable according to the length of the rods that join both halves.

The support includes rubber feet so that it does not scratch or slip and the screws for its assembly.

Notes: Your AKAI deserves to be in a comfortable position to enjoy it. That is why CoverUp have designed this stand so that in your studio, you have the best ergonomics and can make music without thinking about anything else.

Notes: The AKAI APC 40 MK2 Controller Stand is a highly versatile and practical accessory designed specifically for the APC 40 MK2 MIDI controller. This stand offers a host of features that make it an excellent choice for DJs, musicians, and producers who require an ergonomic, stable, and portable solution.

The stand is carefully crafted to provide an optimal working position for the controller, allowing for comfortable access to all knobs, faders, and buttons. Its ergonomic design ensures that you can use the controller for extended periods without straining your wrists or arms.

Stability is a key feature of the AKAI APC 40 MK2 Controller Stand. It is built with a sturdy and durable construction, ensuring that your controller remains securely in place during intense performances or studio sessions. You can confidently engage with the controls, knowing that the stand will provide a reliable platform.

Additionally, this stand excels in terms of portability. It features a lightweight and compact design, making it easy to transport from one location to another. Whether you’re going to a live gig, a studio session, or simply moving between different workspaces, the stand’s portability ensures that you can conveniently take it with you without any hassle.

In summary, the AKAI APC 40 MK2 Controller Stand is a superb product that combines ergonomic design, stability, and portability. It offers a comfortable and accessible platform for your APC 40 MK2 controller, making it an ideal choice for DJs, musicians, and producers who value convenience and performance.

Notes: Your AKAI deserves to be in a comfortable position to enjoy it. That is why CoverUp have designed this stand so that in your studio, you have the best ergonomics and can make music without thinking about anything else.

Notes: Designed specifically for the Akai MPC Live, this stand offers a comfortable and ergonomic position for your equipment.

Crafted with two feet connected by 6mm rods to provide enhanced stability, ensuring your MPC Live stays securely in place.

Assembling the stand takes only seconds, and it weighs just a few grams, making it perfect for musicians who use their MPC Live for live performances.

To protect your MPC Live and prevent slippage, the stand includes silicone feet that prevent scratching and sliding.

Introducing the MPC Live Stand - the ultimate accessory for your Akai MPC Live. Elevate your performance and experience with this specially designed stand that combines comfort, stability, and convenience.

With its ingenious construction featuring two feet connected by sturdy 6mm rods, this stand guarantees rock-solid stability for your MPC Live. Say goodbye to wobbling or shifting during intense performances, allowing you to focus on creating music with confidence.

Setting up the stand is a breeze. In just a matter of seconds, you can assemble it effortlessly, thanks to its smart design. Plus, its lightweight construction ensures that you won't be burdened by unnecessary weight when on the go, making it an essential companion for live gigs and studio sessions.

It is important that you protect your precious MPC Live. That's why the stand includes high-quality silicone feet, meticulously designed to prevent any scratches or slips. Your MPC Live will stay in pristine condition, ready to perform at its best whenever you need it.

Choose the MPC Live Stand and take your music production to new heights. Elevate your setup, enhance your comfort, and unleash your creativity with this must-have accessory.

Weight: 0,5 kg
Dimensions: 10 × 10 × 10 cm

Notes: The double stand is intended to house two Behringer synthesizers, with the ability to improve the operating position on both.

At the same time, it saves a lot of space on the surface, ideal for optimizing the space in our studios.

The stand includes rubber feet so it won’t scratch or slip.

It is compatible with Model D, K2, Pro 1, Neutron, Cat, Wasp

Notes: These supports allow the equipment to be used in an inclined position in such a way that its operation is more comfortable.

The two feet that support the equipment are connected by two 6mm wooden rods. that give it greater stability and prevents the feet from separating.

The temples and the silicone legs are included.

Notes: One of Native's latest creations has its ergonomic stand ready for studying.

Now you can have greater comfort, view your screen and all the equipment thanks to this custom-designed stand.

At the base, there are 3m rubber feet so that the equipment does not move at any time.

Weight: 0.1 kg
Dimensions: 5 × 5 × 1 cm

Notes: The latest addition to the Roland TR family has its exclusive stand.

Specially designed for the Roland TR-8s.

Taking advantage of the shape of its cabinet to securely hold the equipment.

Achieving a very comfortable position during use.

These stands are lightweight, detachable, and take up very little space, perfect for live performers.

In the studio, they save space and improve the working position.

All CoverUp stands feature 3M rubber feet to prevent scratching or slipping.

With its ergonomic design, this stand provides exceptional comfort during use. Its thoughtful construction securely holds the Roland TR-8s, ensuring stability and convenience. Whether you're performing live or working in the studio, this stand offers the advantages of portability and space efficiency. The lightweight and detachable design make it easy to transport and set up wherever you go. Moreover, its compact size allows for convenient storage. Additionally, the high-quality rubber feet provide excellent grip and protect your equipment from scratches. Invest in this ergonomic stand from COVERUP for a comfortable and hassle-free experience while using your Roland TR-8s.

Weight: 0,5 kg
Dimensions: 10 × 10 × 10 cm

Models: TR8S, MC707

Notes: The ideal support for your three Boutique synthesizers.

To use them in a comfortable and ergonomic position, which in turn saves space.

Specially designed taking into account the need for space for wiring and rear connectors.

On the support faces, each support has a recess to place silicone feet and prevent the equipment from slipping or scratching.

Includes the two side supports, the rods and the silicone feet

Notes: Triple support for the entire Korg Volca line (Beats, Kick, Sample, FM, Keys, Bass, Drum, Modular, Mixer)

Save space in your studio and operate your synthesizers more comfortably.

The brackets fit directly into the Volca without the need for screws or moving parts. This makes them easy to transport and set up for those who go out and play with their Volca.

On the bottom, each foot has silicone legs to prevent them from scratching or slipping.

The pictures show red, but the colour is black.

For up to 3 Korg Volca devices
Made of biocompatible PLA plastic
Connection of the side parts by means of wooden rods
Dimensions (W x D x H): 196 x 246 x 271 mm

Suitable for:

Volca Beats
Volca Drum
Volca Bass
Volca Keys
Volca FM
Volca Kick
Volca Nubass
Volca Modular
Volca Sample
Volca Mix

Notes: If you have Behringer TD3 machines in your studio, this is the ideal stand.

Designed and designed exclusively for the Behringer TD3, it may be more comfortable, more spacious and maintains your equipment 100% safe and stable.

All our supports, keep adherent feet 3m behind them so that the support does not loosen.

Notes: The studio legends

For decades now, professional users all around the world have placed their trust in Beyerdynamic's classic range: DT 770/880/990 PRO. These benchmark-setting studio headphones, available in three different models, boast extremely detailed resolution and very transparent sound.

The DT 770 PRO headphones is the range's closed-back model and offers maximum flexibility and detailed sound that you can rely on.

Impressive sound volume

The Beyerdynamic DT 770 PRO headphones have established themselves as a firm favourite amongst music producers, sound engineers and broadcasters and are used in studios all over the world. They reproduce the entire frequency range with incredible precision, and even reproduce low frequencies in punchy detail.

Top-notch impulse response

The headphones are designed for critical music and sound monitoring, providing a perfectly neutral listening environment with exceptional isolation and top-notch impulse response. High frequencies are translated into an analytical and differentiated sound. Ultra-low bass sounds are defined and reproduced crisply.

Extreme comfort

The robust spring steel headband ensures a secure fit for the wearer. Soft ear cups mean that the headphones are comfortable even if worn for prolonged periods. The single-sided cable allows the headphones to be put on and taken off frequently without cables getting tangled.

Allrounder; universal studio

These 80-ohm headphones are the ideal Choice for a range of studio applications.

Made in Germany

The DT 770 PRO headphones are and always have been handcrafted in Germany. The durability of these headphones is worth noting, because all the components used are replaceable if necessary.

High-end studio quality

Thanks to the Tesla technology developed in Heilbronn, the DT 770 PRO offers even finer resolution with precise and powerful bass. The pro flagship also sets new standards in terms of wearing comfort and workmanship.

Technical specifcations

Transmission type: wired
Weight headphones without cable: 270 g
Transducer type: Dynamic
Operating principle: Closed
Nominal frequency response: 5 - 35,000 Hz
Nominal impedance: 80 O
Nominal SPL: 96 dB
Nominal T.H.D: < 0.2%
Power handling capacity: 100 mW
Sound coupling to ear: Circumaural
Ambient noise isolation: approx. 18 dBA
Nominal headband pressure: approx. 3.5 N
Weight: 345 g
Length and type of cable: 3 m / straight cable
Connection: Gold plated mini stereo jack plug (3.5 mm) & 1/4" adapter (6.35 mm)

Notes: The iconic Synclavier brand returns with this digital powerhouse, based around FM synthesis but also offering additive and subtractive methods. Super versatile, with up to 98-voice polyphony and MPE support.

Supplier's Notes:
The new buck in the Synclavier stable

Synclavier Regen is the newest in an auspicious line of Digital FM synthesizers. Designed for desktop use, it contains the power of the Synclavier II DSP engine, enhanced and optimised. Full colour screen, liquid-like touch controls, high fidelity audio output coupled with a sound design powerhouse makes this the synth you always dreamed of.

Regen supports additive synthesis for full control of 24 harmonics. Synclavier have now added subtractive synthesis to the Synclavier synthesis engine, especially for Regen, allowing creation of super saws, PCM square waves, and noise generation. Or you can use samples for your carrier waveform.

And these different waveform generators can be mixed. You have up to 12 partials to use in your sound design creation with crossfades assignable to inputs such as velocity, pressure, mod wheel, and of course, keyboard.

Regen is loaded with content to get you inspired fast. There are over 550 timbre presets across 10 newly commissioned timbre libraries. On top of that, there are over 2000 royalty-free samples built-in, including over 350 selected original samples from the NED era and 2 exclusive artist sample libraries.

When you're done exploring the factory content, you'll have fun with the sound design possibilities. You can layer up to 12 partials with different sound generators (additive, subtractive, samples) then apply dynamic effects per partial. It's truly an expressive instrument, both to program and to play. Polyphonic aftertouch and MPE is fully supported and there's a sophisticated modulators section where you can apply responsive curves to properties driven by pressure, velocity, mod wheel position, and so on.

Synclavier Regen is a desktop unit measuring 310mm wide by 260mm tall and 42mm deep.

Housed in aluminium, finished with a sand-textured black and Synclavier red surround. It has rubberized plinths.

User interface consists of many silicone buttons with multi-colour backlighting, a virtual knob capacitive-touch slider with epoxy-coating. A VK display is included as well as a main modal display that shows current parameters, user settings, timbre library, etc.

Over 40 years of synth design has led to this product. It's a sound-designer's dream in a timeless desktop package.

Sound-design Capabilities

Advanced DSP synth engine, as used on Synclavier II, has been extended for Regen.
12 separate tracks of multi-timbrality, assignable to MIDI tracks and keyboard ranges.
Up to 98 simultaneous voices. Voice count is dependent on system load and is likely to be much higher in typical scenarios.
12 partials per timbre. Each partial can be 1 of 3 oscillator synth modes: additive, subtractive, or samples.
Additive mode supports coefficient and phase control of 24 harmonics.
In samples mode, up to 128 samples can be placed on the partial's patchlist.
Subtractive can have a noise generator or up to 9 de-tunable continuous sawtooth waveforms.
Hybrid (resynthesized samples)
Timbre-level effects, including:
Stereo reverb algorithm with pre-delay and library of presets.
Highly-optimised multi-mode filter with sophisticated filter envelope.
Bit-crusher (for use with additive, sample, and hybrid modes).
Frequency modulation (FM) controllable per partial (all modes) with envelope.
Sophisticated modulation system that allows many Regen parameters to be controlled via MIDI, LFOs (24 per timbre), or driven by envelopes (24 per timbre).
Approx 300MB of sample space in memory = 100 mins @ 48Khz 24-bit mono shared across all active tracks and partials.

Hardware

Balanced stereo output through XLR connections at pro-level 4dBu. Designed for studio and home use. These are DC-coupled for maximum bass impact.
Single-ended TS stereo outputs, also DC-coupled.
Convenient headphones TRS jack for monitoring master audio with independent volume
control. For headphones in range 32O - 300O.
DAC circuit is designed for ultra-low noise floor. 11dB of headroom over nominal level. A
measured 130dB of dynamic range. 24-bit, 50kHz sample rate, as per Synclavier II.
Hybrid sound design engine: original Synlcavier II hardware is modelled in software.
High quality audio components throughout, including a precision temperature compensated crystal oscillator for jitter-free digital audio.
Two glorious full-colour sunken displays.
Responsive silicon back-lit parameter buttons.
The vertical value swiper is touch accurate to 128 levels of resolution for precise control
of every parameter.
12 selector buttons are touch-sensitive and can handle gestures to quickly select
multiple partials or tracks.
SD Card reader for unlimited user timbre and sample libraries.
4 USB accessory ports for MIDI keyboards, sequencers, and audio interfaces. Plus 1 USB Host port for connecting to a computer for MIDI input from a DAW.
Take it on the road. Rugged, full metal enclosure.

Notes: The Sloer Stereo Ambient Reverb builds on our popular Slo lineup but adds two additional reverb algorithms, stereo width control, two additional modulation wave shapes, and the ability to control the sample rate. Now you can create immersive, lush, modulated, sleepy, and ambient soundscapes with more width and depth than ever before.

Save your favourite dreamscapes with three onboard presets by simultaneously pressing and holding down on the bypass and sustain switches. Scroll through them by simultaneously pressing and releasing bypass and sustain.

The five-way rotary dial allows five different reverb modes - the three you know and love from the Slo: Dark (Lower Octave), Rise (Ambient Swell), and Dream (Latching Pad); and the addition of two new modes: Rain (Delay Tap Diffusion) and Light (High Octave Shimmer). Secondary functions on the dial change between five different wave shapes for modulation on the reverb trail.

Combine deep modulation, long washy trails, and an immersive stereo field to experience Sloer.

5 reverb modes:

DARK - Add a lower octave to your reverb trail. Here you'll create deep and wide atmospheric sounds and channel nightmarish soundscapes. X knob sets the level of a -1 octave signal that feeds the reverb.

RISE - This is an auto-swell reverb for beautiful cinematic swells. Don't rush it. Let it breathe and gently wake up. X knob sets the amount of time it takes the reverb to swell in after a note is played. Set lower for shorter rise times and higher for longer rise times.

DREAM - Lush reverb with a latching pad function. Press the sustain switch to latch signal. Experiment with the X knob to add vibrato over the pad. Press sustain again and the pad will decrescendo according to where the decay knob is set. X knob sets the depth of vibrato applied to the reverb trail.

RAIN - Tappy and trippy, this program creates a unique effect with lower levels of diffusion allowing the reverb delay taps to audible create an echo-like effect within your reverb. Use the Xcontrol to set the amount of diffusion of the delay taps.

LIGHT - Bright and smooth reverb with an octave-up shimmer. Create a range of ethereal sounds with the X slider, keep it low for a smooth pad-like reverb or push it higher for a bright shimmer effect.

5 wave shapes

The Sloer also features five different wave shapes accessible by holding down bypass while switching the algorithm dial.

Sine - Smooth and even pitch up and down modulation.
Warp - Asymmetric pitch up modulation similar to a warped record.
Sink - Asymmetric pitch down modulation for sinking detune similar to a Bigsby.
Square - Symmetric pitch up and down modulation for stepped modulation.
Random - Uses sample and hold that picks new random values.

Momentary functions

Bypass: When the switch is in the off position, press and hold to temporarily activate the effect to add a moment of reverb texture. Releasing the switch turns the effect off, and fades it out.

Sustain: When pressed, the decay switch ramps up the reverb trail to maximum creating a long dreamy reverb trail, and then ramps back down to the decay knob setting when released. In the "Dream" algorithm, the sustain switch is latching. Press it once to capture and sustain the current reverb decay for extremely long pad-like sounds. Press it again to let the reverb trail taper off, based on the position of the decay knob.

Trails mode

The Sloer can run in trails or no trails mode. In trails mode, when you turn the pedal off, the reverb decay dies off naturally. In no trails mode, the decay is abruptly cut off when you turn the pedal off. To toggle between either mode, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.

Preset spillover

When scrolling through presets, there is only preset spillover if the next preset is the same algorithm as the one preceding it. For example, if your red and green presets are both in Dream mode, switching from red to green will not cut your reverb trails.

Specs

The Sloer comes in a Lollipop Blue finish with light blue and off white ink featuring original artwork by Christi Du Toit OR a matte black finish with cream ink.
The die-cast enclosure's exact size is 4.79" x 3.62" x 2.25" including knobs.
Power requirements are 9VDC (100mA minimum).
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.
Power supply not included.

Notes: Building on the reputation of its award-winning predecessors, the Erisr Studio 5 is a substantial update that delivers richer low-end and more controlled high-frequency response that reproduces every detail in your recordings with a natural sound unparalleled in its class. Designed for superior performance in both home studio and small professional mix rooms, the Eris Studio 5 combines flexible connectivity with sonic accuracy that puts it a class all its own.

The custom-designed EBM (Elliptical Boundary Modeled) waveguide provides superior high-frequency response and wide 100-degree horizontal dispersion to create a broader sweet spot. Narrow vertical dispersion reduces reflections from your desk, and a silk-dome tweeter ensures snappy, accurate transient reproduction. An elegant new enclosure design improves the waveguide performance so you'll hear the finest details in your mix.

The woven-composite low-frequency driver offers Eris' signature tight, clear bass with plenty of punch. Its 80W of biamped power make the Eris Studio 5 more efficient than previous designs. The ported enclosure maximizes bass response and allows the Eris Studio 5 to reach down to an astonishing 48 Hz - without a subwoofer!

Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You'll have no problem hooking your Eris speakers up to virtually anything.

Features

5.25-inch woven composite low-frequency driver
1-inch, ultra-low mass, silk-dome, high frequency driver
Crossover Frequency, 3.5 kHz
100- x 60- EBM waveguide provides a sweet spot
Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
80W, Class AB dual amplification
48 Hz to 20 kHz frequency response
102 dB Peak SPL (@ 1 meter)
Acoustic Tuning Controls:
Acoustic Space (Flat, -2 dB, -4 dB)
High Frequency (+/-6 dB, center 10 kHz, continuously variable)
Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)
Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Inputs:
XLR and 1/4-inch TRS balanced rear-panel inputs
RCA unbalanced rear-panel inputs

Protection:
RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
Power Saver mode (engages after 40 minutes)

Set up your studio monitors for your room.

Erisr Studio 5 active monitors are equipped with Acoustic Tuning controls to ensure the flattest response in your mix environment. You get Low Cut, Mid, and High controls, as well as three-way Acoustic Space tuning that makes it easy to compensate for the boundary bass boost that occurs when a speaker is placed too close to a wall.

Honest. Expressive. Powerful.

Like all PreSonus studio monitors, the Eris Studio 5 offers consistent, accurate listening. Their stylish design makes them a welcome addition to any mix space and their smooth, incredibly even frequency response ensures that your mixes will sound great everywhere.

Specs

Electronics
Voltage: 220-240V UK
Wattage: 80 Watts
Input impedance: 10kO

Performance

Peak SPL: 102 dB (@ 1 meter)

Speakers
Crossover frequency: 3.5 kHz
Coverage pattern: 100 degree (H) x 60 degree (V)

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard

Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)

Audio switches: Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Monitor inputs: 1- Balanced XLR, 1- Balanced 14" TRS, 1- Unbalanced RCA

Power amplifier type: Class AB

Measurements

Dimensions: 11.50 x 8.00 x 8.80 in

Product depth: 8.78" (22.3 cm)
Product height: 11.5" (29.2 cm)
Product width: 8" (20.32 cm)

Notes: Part of the excellent Eris range, the Studio 8 is PreSonus's eight-inch two-way studio monitor, offering solid performance all the way down to 35 Hz and crystal clear reproduction thanks to 1.25-inch silk-dome tweeters and Elliptical Boundary Modeled waveguides.

Supplier's Notes:
With a smooth, accurate frequency response; powerful amplification with tons of headroom; and Acoustic Tuning functions that ensure you get the best sound, it's no wonder that Erisr-series studio monitors have been a runaway hit since their introduction. Building on the reputation of its award-winning predecessors, the Eris Studio 8 is a substantial update that delivers richer low-end and more controlled high-frequency response, reproducing every detail in your recordings with a natural sound unparalleled in its class.

Designed for superior performance in both home studios and professional mix rooms, the Eris Studio 8 features a custom-designed EBM (Elliptical Boundary Modeled) waveguide that provides superior high-frequency response and wide 100-degree horizontal dispersion to create a broader sweet spot. Narrow vertical dispersion reduces reflections from your desk, and a 1.25-inch, silk-dome tweeter ensures snappy, accurate transient reproduction. An elegant new enclosure design improves the waveguide performance so you'll hear the finest details in your mix.

The woven-composite, 8-inch, low-frequency driver offers Eris' signature tight, clear bass with plenty of punch. Its 140W of biamped power make the Eris Studio 5 more efficient than previous designs. The ported enclosure maximizes bass response and allows the Eris Studio 8 to reach down to an astonishing 35 Hz - with no subwoofer!

Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You'll have no problem hooking your Eris speakers up to virtually anything.

Features

8-inch woven composite, low-frequency transducer
1.25-inch (31.75 mm), ultra-low-mass, silk-dome, high-frequency transducer
100-(H) x 60-(V) EBM waveguide for a wide sweet spot
Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
140W, Class AB bi-amplification
35 Hz to 20 kHz frequency response
106 dB SPL (Peak, @ 1 meter)
Acoustic Tuning controls: HF (i6 dB, continuously variable); Midrange (i6 dB, continuously variable), and Acoustic Space (flat, -2, -4 dB), plus highpass filter (Off, 80 Hz, 100 Hz)
RF interference, output-current limiting, over-temperature, transient, subsonic protection, and amplifier "soft start" feature (eliminates popping on power-up)
Internal power supply with IEC connector and power switch with on/off LED
Balanced XLR and 14-inch inputs and unbalanced RCA inputs

Set up your studio monitors for your room.

Erisr Studio 8 active monitors are equipped with Acoustic Tuning controls to ensure the flattest response in your mix environment. You get Low Cut, Mid, and High controls, as well as three-way Acoustic Space tuning that makes it easy to compensate for the boundary bass boost that occurs when a speaker is placed too close to a wall.

Honest. Expressive. Powerful.

Like all PreSonusr studio monitors, the Erisr Studio 8 offers consistent, accurate listening. Their stylish design makes them a welcome addition to any mix space, and their smooth, incredibly even frequency response ensures that your mixes will sound great everywhere.

Specs

Electronics
Voltage: 220-240V UK
Wattage: 80 Watts
Input impedance: 10 kO

Performance
Peak SPL: 6 dB (@ 1 meter)

Speakers
Crossover frequency: 3.5 kHz
Coverage pattern: 100 degree (H) x 60 degree (V)

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard

Audio controls: Volume High Frequency (+/-6 dB, centre 10 kHz, continuously variable) Mid Frequency (+/-6 dB, centre 1 kHz, continuously variable)

Audio switches: Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
Monitor inputs: 1- Balanced XLR, 1- Balanced 14" TRS, 1- Unbalanced RCA
Power amplifier type: Class AB

Measurements

Dimensions: 16.50 x 9.80 x 11.70 IN

Depth: 11.73" (29.8 cm)
Height: 16.5" (41.91 cm)
Width: 9.84" (25 cm)

Notes: PreSonus showcase their expertise with these painstakingly crafted monitors. Coaxial design offers all the benefits of a point source, for precise stereo imagine and phase alignment.

Supplier's Notes:
Listen to your mixes reproduced with lifelike realism! The Erisr Pro 8's symmetric design and consistent acoustic centre provides superior phase alignment between components to deliver a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns, making them ideally suited for immersive Dolby Atmos rooms and stereo mix environments alike.

The Eris Pro 8's coaxial design provides a single acoustic point source that creates a natural listening experience, revealing the subtlest nuances in your recordings, while providing a three-dimensional soundstage, detailed transient response, and lifelike sonic reproduction. Combined with a punchy low-end that defies its compact size, the Eris Pro 8 provides a superior listening experience for both home studios and professional mix rooms.

A 1.25-inch, ultra-low mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while a 8-inch, woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. A ported enclosure and 140 watts of power allows the Eris Pro 8 to reach down to an astonishing 35 Hz, while a finely detailed transient response and stunning dynamics deliver a natural and less fatiguing experience.

Acoustic tuning controls and a three-way Acoustic Space tuning lets you accurately configure the Eris Pro 8 for your room. Flexible input options enable connection to almost any line-level source, from mixers to audio interfaces and more. Provisions for wall and ceiling mounts make it easy to integrate Eris Pro 8 monitors into any stereo or multi-channel system.

Features

Single point-source coaxial design for wider sweet spot and better phase alignment
8-inch, woven-composite, low-frequency driver
1.25-inch, silk-dome, high-frequency driver
140W, Class AB amplification
35 Hz to 20 kHz frequency response
105 dB SPL (Peak, @ 1 meter
Acoustic Tuning Controls: Acoustic Space (Flat, -2 dB, -4 dB), High Frequency (+/-6 dB, center 10 kHz, continuously variable), Mid Frequency (+/-6 dB, center 1 kHz, continuously variable), Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
XLR and 14-inch TRS balanced and RCA unbalanced rear-panel stereo inputs
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)
Wall and ceiling mountable

Inspired design for inspiring results

Placing the high-frequency driver in the centre of the low-frequency driver increases clarity, widens stereo imaging, and produces an incredibly even mid-range. Vocal clarity, the attack of a snare, and guitar presence shine through, allowing you to quickly and accurately place them in a mix and get the results you desire faster than ever before.

Symmetric response

The Eris Pro 8's coaxial design provide a symmetrical dispersion resulting in a crisper stereo image, greater soundstage depth, and superior separation between components in a complex mix.

Set up your studio monitors for your room

Acoustic Tuning controls ensure you'll get the flattest frequency response possible in your mix environment. You get Low Cut, Mid, and High controls, as well as 3-way Acoustic Space tuning that allows you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner.

Specs

Electronics

Voltage: 220-240V UK
Wattage: 140 Watts
INPUT IMPEDANCE
Input impedance: 10KO

Performance
Peak SPL: 108 dB (@ 1 Meter)

Speakers
Crossover frequency: 3.1 kHz

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard

Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Mid Frequency (+/-6 dB, center 1 kHz, continuously variable)

Audio switches

Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)

Monitor inputs: 1- Balanced XLR, 1- Balanced 14" TRS, 1- Unbalanced RCA

Power amplifier type: Class AB

Measurements

Dimensions: 12.80 x 10.60 x 12.20 in

Depth: 12.2" (30.1 cm)
Height: 12.82" (32.6 cm)
Width: 10.63" (27 cm)

Notes: Intended for serious personal studios and professional music-production environments, the Erisr Pro Sub 10 helps you take charge of the low-frequency foundation of your mix. An ideal companion to Eris Pro- and Eris Studio-series reference monitors, the Eris Pro Sub 10 complements full-range monitors without overshadowing them and extends the reach of your full-range system's low end with a natural sound.

Powerful and musical, the PreSonusr Eris Pro Sub 10 active, front-firing studio subwoofer is designed to deliver fast and accurate transient response, extending low frequencies down to 20 Hz, allowing you to hear the full-spectrum range of your mix. Driven by 170W (RMS) Class AB amplification, the Eris Pro Sub 10's 10-inch, glass-composite, low-frequency driver delivers tight, responsive sub-bass, thanks to its lightweight and rigid cone. This design provides lower distortion than other materials for sub-bass reproduction that's as coherent and clear as your full-range monitors.

Extensive user controls include input gain, continuously variable lowpass filter for creating a seamless crossover transition, and a switchable highpass filter that removes content below 80 Hz from the full-range signal sent to the monitors. A continuously variable lowpass filter (50 Hz to 130 Hz) allows you to create a seamless crossover transition between the full-range studio monitors and subwoofer for the most accurate listening environment possible.

Features

10-inch, front-firing, glass-composite, low-frequency transducer
Front-firing, bass-reflex acoustic port
Continuously variable lowpass filter (50 Hz to 130 Hz) sets the upper frequency reproduced by the subwoofer
Switchable highpass filter removes frequency content below 80 Hz from the full-range subwoofer outputs to the main monitors
Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
Input gain control (-30 dB to +6 dB, continuously variable), polarity invert switch, and ground-lift switch
170 watt (RMS), Class AB amplification for up to 113 dB SPL, with a frequency response of 20 to 200 Hz
Left and right, balanced XLR and 14-inch TRS and unbalanced RCA main inputs
Left and right balanced XLR and 14-inch TRS outputs and XLR subwoofer output for connecting a second Eris Pro Sub 10

Versatile connectivity

Erisr Pro Sub 10 subwoofers provide the connections needed to act as the central hub for a basic monitoring setup, including left and right balanced XLR and 14-inch TRS and unbalanced RCA main inputs. Connect full-range monitors with left and right balanced XLR or 14-inch TRS outputs. An XLR subwoofer output lets you connect a second Pro Sub 10.

Seamless system integration

The Erisr Pro Sub 10 integrates seamlessly with your full-range monitors. A variable lowpass filter sets the upper (crossover) frequency reproduced by the subwoofer. A switchable highpass filter on the full-range outputs helps avoid frequency cancellation and reinforcement in the subwoofer's upper range, while a polarity-invert function ensures your system is in phase. A momentary footswitch (included) makes it easy to compare your mix with or without sub-bass frequencies.

Electronics
Voltage: 220-240V UK
Wattage: 250W Peak, 170W RMS

Performance
Peak SPL: 113 dB (@ 1 Meter)

Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard
Audio controls: Input Gain Range: -30 to +6 dB Low Pass Filter Control: 50 Hz to 130 Hz
Audio switches: Polarity Switch: 0 degrees or 180 degrees Ground Lift Switch: On/Off High Pass Filter Switch: On/Off Bypass Footswitch: On/Off
Monitor inputs: 2- Balanced XLR, 2- Balanced 1/4" TRS, 2- Unbalanced RCA
Power amplifier type: Class AB

Dimensions: 15.70 x 12.60 x 16.00 in
Weight: 37.00 lbs
Depth: 16" (40.6 cm)
Height: 15.75" (40 cm)
Width: 12.6" (32 cm)

Accessories
1-Button Footswitch Included

Notes: ***B-STOCK: Box opened, product in perfect working order***


3 Channel 80s/90s Preamp

The VESTA contains a brand new set of voices from KRS along with a familiar feature set. Based on a couple of your favourite amps of the 80s and 90s, you'll feel right at home. Picture a classic Crunch tone suitable for rock and blues, along with a familiar 90s high-gain sound. If modern extended range high-gain is your thing, the CERES delivered. If you're more at home on a 6 string, the VESTA may be your preference.

It's smooth, chunky, thick, and more low-mid focused. It takes boosts just like your favourite vintage high-gain amps. It responds incredibly well to the guitar's volume control. Note: The Clean channel is identical to the CERES'.

Top mounted jacks allow for easy integration into your existing pedal board. Unique to our pedal operation, we include 3 bypass modes - True Bypass, Buffered Bypass, and Clean Bypass. In True and Buffered bypass the pedal operates as expected, no tonal coloration. The Clean Bypass mode enables the top row of Tone and Volume knobs accessing the Clean channel. These various Bypass Modes allow for integration into any style of rig - from driving a power amp directly (Clean mode), hitting a clean amp down the chain on your pedal board (True Bypass mode), or at the start of your pedal board, driving your other pedals into a clean amp (Buffered mode).

The preferred operating method is to run the VESTA into the input of the effects loop return of any amplifier head or directly into a power amp, but it will also work just as well when run into a clean channel with some EQ tweaking. For example, a typical Fender style clean circuit sounds best with Mids cranked, Bass around noon, Treble around 9-10:00, and Bright OFF. Tweak to taste...

Time based effects (delay, chorus, flange, etc) should be placed after the VESTA, before the power amp. A simple loop switcher can even be used to create effects loop(s) between the VESTA and power amp.

The VESTA includes two integrated footswitch buttons to activate the 3 channels. The left button toggles between Bypass and Rhythm/Lead.

The right button toggles between Rhythm and Lead. With the Bypass Mode switch set to Clean, bypassing the pedal actually activates the Clean channel.

Both distortion channels have the same switches and controls, and work in the same manner. However, Rhythm is inherently tighter and more aggressive than the Lead channel. Lead is more compressed and smoother and fatter overall. The Clean channel is not designed to get the "pushed" sound with the Level increased, rather it is designed to stay clean.

The gain controls in all channels feature the same range from clean to saturated signals and operate as close as possible to the full size KSR amps. They function without any unwanted top-end artifacts typically associated with solid-state circuits. The VESTA EQ options then make for a highly versatile Pre-Amp pedal giving you as much control.

Notes: 8-input, 8-output sequential/addressable switch with manual, trigger, and CV control, plus three grouping options, multiple switching directions, and randomization.

Vice Virga is an 8-input, 8-output sequential/addressable switch with a plethora of features and extensive patchability. Vice Virga can be configured as a single 8-channel switch, two 4-channel switches, or four 2-channel switches. Equal parts automated patch arranger and performance tool, Vice Virga has loads of switching control options. Whether you want to chain sequencers, swap outputs on an oscillator, remix a trigger pattern, or mix up every connection in a patch just to see what happens, Vice Virga can do it!

Features:

Size and power:
8HP Eurorack
+12v: 40mA
-12v: 20mA
Vice i from Latin for "alternately"

Virga i from Latin for "switch"

"Alternating Switch"

Notes: Your Palette case is the ideal solution for your space conscious and portable needs. At about the same size as a small laptop, your Palette fits comfortably on your desktop; in your backpack; at your favourite coffee shop; in your jam space; or pretty much anywhere else you might desire to play. Your imagination is the only limit. With 62hp of rack space, you can piece together powerful but focused mini systems and control surfaces. Intellijel's 1U row and built-in i/o ports add a ton of extra utility to bring the most out of your Eurorack modules. Truly a palette for the sonic artist.

Utilities panel:

- Dual 1:4 buffered multiple
- Two 1/4" balanced audio jacks that can be connected to the Stereo Line Out 1U, Pedal I/O 1U or Mixup
- 1/8" (6.35mm) MIDI Input that can be connected to uMIDI 1U
- USB port that connects to the uMIDI 1U and other future modules
- Rocker switch and barrel plug for power entry

Construction:

- Anodized aluminium
- Aluminium extruded rails with steel threaded inserts
- Rubber feet to protect your desktop
- Rear mounted power supply for maximum module depth

Includes:

- 40W Meanwell AC/DC adapter with right angled connector
- 3FT North American IEC power cable
- 1/8" (6.35mm) TRS to 5-Pin Din MIDI adapter

Notes: Desmodus's Aggressive Reverb/Delay Counterpart.

Not quite a reverb, not quite a delay, it's Desmodus's more aggressive clocked counterpart. More distortion, more in-your-face atmospheres, and synced delays for creating your tails in a whole new way. Use Electus Versio as a spacey clocked delay, as a reverb that starts with some synced echoes, or as a completely new way to create evolving spaces.

Notes: The FUNCTION music synthesizer module is part of the MATHS family of control voltage utility modules. It is a small analog computer designed for solely musical purposes.

Features:

Generate a variety of linear, logarithmic, or exponential functions
Functions as short as 2ms and as long as 25 minutes per cycle!
Triggered Functions (Envelope)
Continuous Functions (LFO)
Invert and/ or Integrate (Lag, Slew, Portamento)
Discrete Time Functions (S&H, T&H)
LEDs indicate activity on all outputs
End of Rise and End of Cycle Pulses facilitate programming of more complex functions
All outputs capable of driving a passive 4 way mult without loading effects (no buffered mult needed here)
Perfect for modulating the DPO and just about anything else

Specifications:

Width: 8hp
Max Depth
(incl. power cable): 32mm
Power:
30mA@ +12V
20mA @ -12V

Notes: A reverb processing powerhouse!

The EHX Oceans 12 is the Oceans 11's big brother with even more reverbs and functionality. It features two simultaneous, independent, stereo reverb engines, series and parallel control for the dual reverbs, 24 presets and advanced I/O allowing for stereo in/out or mono send/return with pre and post reverb options. The pedal also includes a new Tide Control for stereo image alteration, a Lo-fi Control, an infinite attenuation control and an input jack for external expression and 3-button footswitch control.

A Tails switch provides a choice of whether the reverb effect fades out naturally or stops immediately when the pedal is switched to bypass. In most settings the pedal is also capable of producing infinite reverb which can be played over with a different reverb effect.

The Oceans 12's reverbs are:
• ROOM - two modes: reverb algorithms modeled after a lively room and a spacious performance hall
• SPRING - two modes: vintage 1962 Fenderr 6G15 tube reverb emulation and the spring algorithm from the EHX Holy Grail
• PLATE - two modes: two emulations of the smooth, metal plate reverb often used in high-end recording studios during the 1960s and '70s
• REVERSE - two modes: a reverse reverb effect as well as true reversed echoes
• ECHO - three modes: a digital delay with various echo rhythms feeding into a plate reverb
• TREM - three modes: a classic, periodic volume envelope with various shapes applied to both the wet and dry mix of a hall reverb
• MOD - three modes: combinations of chorus and flange reverbs that create rich reverb tails
• DYNA - three dynamic, experimental reverb algorithms: swell, gate and duck
• AUTO-INF - three modes: auto-infinite reverb (w/optional chorus or flange) that "listens" to your playing and crossfades to a new reverb wash upon detection of newly struck notes.
• SHIMMER - two modes: two configurations of a rich octave-shifted reverb wash
• POLYPHONIC - two modes: two configurable bi-directional pitch shifts that add dimensionality to the reverb tail
• RESONANT - two modes: reverb excited by tunable resonators and configurable self-oscillating filters on the reverb tail

2 simultaneous, independent, stereo reverb engines
Series and parallel control for the dual reverbs
24 presets
Stereo in/out or mono send/return with pre and post reverb options
Tide Control for stereo image alteration
Lo-fi Control
Infinite attenuation control
Tap tempo to set your pre-delay time, echo time and more
Input jack for external expression and 3-button footswitch control
Power supply included

SPECIFICATIONS
Circuit
Digital
Bypass
Buffered Bypass
Audio
Stereo
Effects Loop
Yes
Power Supply
9.6VDC-200mA power adapter included
Dimensions (in)
4.75 x 3.9 x 2.5
Current Draw
150mA
Year Released
2020

Notes: NEXUM is a smart multi-cable tester.

Why:

To test the unknown power cable of a fresh module.
To check if all the spaghetti is working before a gig.
To know if your power supply is well-mannered.
To mass produce cables and be sure that all of them are working.

With:

Eurorack 2.54mm cables - 10 pins and 16 pins ones.
Other 2.00mm connection cables - 20 pins headers.
JST 1.27mm cables - 20 pins headers.
Patch cables - 3.5mm TS & stereo - 3.5mm TRS.

How:

Plug a cable in one of the sockets and the other end specularly on the opposite side. Check if the blue LEDs light up steady in a number equal to the cores of the cable you are testing. Wiggle the wire back and forth just to be sure that all the individual cores are firmly connected.

Due to its configuration, the connection is considered true only if there is no continuity between the adjacent wires or discontinuity in that specific core. This smart feature will avoid false positives.

On top there are two LEDs indicators directly wired to the power lines to check if the -12V or +12V PSU power lines are misbehaving.

Dimensions:

8 HP
18 mm deep

Current Draw:

50 mA +12V
5 mA -12V

Notes: GOBLET is an analogue filter and distortion unit with some added quirks and extra controls.

Why:

To make stuff sound filthy.
To shape the output of an oscillator.
To live interact with the sound during a performance.
To soft sweep the cutoff thanks to the optocouplers logarithmic response.

With:

Simple waves - make them unrecognizable.
Complex waves - shape them into something new.
Percussions - crank the resonance and give an acid twist to a beat.
No input - play with the feedback and the touch controls.

Dimensions:

8 HP
18 mm deep

Current Draw:

45 mA +12V
25 mA -12V

Whichever power connector you use should work fine with the polarity.

Notes: AGOGO is a pack of 8 vactrol low pass gates in an open design configuration.

Why:

To bongo.
To enhance and enrich a weak audio source.
To create sub-mixes of up to 8 inputs.
To send a single source to many outputs and modulate each one of them individually.

With:

Multiple fixed waveforms - use the individual LPGs as a CV scanner.
Stereo sources - control them with a single CV input.
EOC pulses and triggers - this is where it gets percussive.
Slow modulations - take advantage of those vactrols and their natural decay.

How:

"I", the inputs row is normalized from top to bottom.

An input inserted in the first socket will be copied unaltered to the next one.

If a jack is plugged in it will break the normalization.

"V" is for control voltages and they cascade the same way as the inputs following to natural decay of the vactrol response. All the LPGs can be opened simultaneously with a single CV source. Combining the features of both "I" and "V" rows you can control a signal with 8 different CVs or 8 different sources with the same CV.

"O" stands for outputs. They act as an active mixer letting you combine up to 8 signals. As in the previous two rows, the connection can be interrupted in any given point to create sub mixes or individual outputs.

Since Jolin are actively summing copies of the original input, each LPG stage will add saturation to the final out. Thanks to the open design path and normalizations this is just an additional feature: all the LPGs can still be used individually or in multiple combinations for multichannel effects or other creative application. More AGOGOs can be chained together thanks to headers on the back to multiplicate the number of inputs/outputs.

Dimensions:

6 HP
28 mm deep

Current Draw:

150 mA +12V
90 mA -12V

Notes: Unique synth voice based around a digital triangle wave oscillator with percussive element, dual filters, envelope, LFO, spring reverb and touch pads for performance.

Supplier's Notes:
The Quandrantid Swarm module is a versatile and unique synth voice for sound designers and musicians looking to explore exquisite and unfamiliar timbres that range from subtle to outrageous, nebulous to shimmering.

It features a digital synthesizer voice with a percussive element, an analog 2-pole filter, an LFO with eight waveforms, and a spring reverb. The 8 touch keys can be used as a mono keyboard, polyphonic keyboard or an eight step sequencer. The synth interfaces with other instruments via MIDI, and CV/Trig inputs. The semi-modular design allows you to get hands on immediately, but you can and should use patch cables to fully explore the potential of this instrument.

Power consumption: 170mA at +12 V and 70mA at -12 V

HP : 40

Notes: Get your patch cables out of the way of your patching with these right-angle patch cables. Pack of eight 24" (60cm) cables are available in the Modbap Modular brand colors - blue, pink, black, and white. Options include all eight cables in one color or choose a variety of colors.

Pack of 8 cables

Right angle to right angle

Modbap brand logo moulded

1/8" to 1/8" (3.5mm to 3.5mm)

Notes: 4-input VCA stereo mixer w/ pan, stereo out, metering

50mm deep

Notes: A Re-envisioning of the Filter Effect

Turning its predilection for parallel signals toward the world of filters and widening out to full stereo, Old Blood Noise Endeavors unveils its first digitally-controlled analogue pedal. Float boasts two independently controllable filters and copious capabilities for motion. Utilising the two filters in tandem can create stereo movement, linked reactive elements, and modulations that approach harmonic tremolo and phaser, as well as classic filter sounds.

Old Blood Noise were familiar with some aspects of the filter pedal. But the slow dual motions, the controls that go a little more left than you expect, the parallel undulations and surely other corners were all left unexplored.

So, turning their predilection for parallel signals toward the world of filters and widening out to full stereo, say hi to Float, the new Dual Moving Filter pedal! As OBNE's first digitally-controlled analogue pedal, Float boasts two independently controllable filters and copious capabilities for motion.
Utilising the two filters in tandem can create stereo movement, linked reactive elements and otherworldly psychedelic modulations. The two independent filters can be set to either low pass, band pass or high pass. The core of each filter is its Cutoff Frequency, which can stay still or move via either its 6 different LFO shapes or through its dynamic Envelope triggering.

The envelope sections can unleash quacky auto-wahs, shooting sonic laser beams or organically rising and falling filter landscapes - all triggered by your playing. While the LFOs lets Float become a mind-bending modulation device that can become everything from a phaser, a harmonic tremolo, a choppy or bubbly step-filter or an automated synth-like sweeper. However, skip the Modulation or envelope sections and the dual sliders come into play. This allows you to use Float as a dual-band EQ for subtle to extreme tone shaping, as a manual filter for on-the-fly futuristic filter sweeps or even for old-school wah-tones. Each filter also sports a resonance control, allowing you to unearth velvety smooth filters, vocal-like formants, screaming sonic squelches and anything in between.

All of this is pretty familiar, but also pretty sweet. Like an amalgamation of all things filtery and good. But where things start to get really different and really fun is when you mess with the Sync and Routing of the two filters. By flicking that tiny toggle labelled Sync to On, the two filters will move like tonal twins - locked in, precise and uniform. This lets you create robotic sequencer-like textures, trippy dual modulations or ultra-long, yet perfectly timed, filter manoeuvres. You can also set it to Off and have them completely free-rolling for organically weaving textures or full-on filter cacophonies. In addition, the filters can be run in either parallel mono, series mono or stereo for all kinds of refined dual movements, cascading filter chaos or lush and dreamy stereo sweeps.

To round off this veritable filter playground, we've added an expression in port, that lets you take hands-free control over either the cut-off frequency or LFO Rate, allowing you to keep your fluttery filter modulation as expressive as the music you play.

So, that's Float... or that's the essence of Float. You'll unlock sounds from this thing that you never knew it was capable of, because it does a lot of good, weird, wild, tame, ugly and absolutely stunning stereo stuff. Float on, friends!

Notes: PSU for IK Multimedia iRig Mix mobile mixer.

Notes: This mixer has three AC-coupled channels, each with a logarithmic unity-gain attenuator; suitable for mixing audio signals from modules such as VCOs etc.

Specifications

Format: Eurorack
Width: 8hp
Depth: approx. 25mm
+12V: 20mA
-12V: 20mA
+5V: 0mA

Notes: The AKAI APC 40 MK2 Controller Stand is a highly versatile and practical accessory designed specifically for the APC 40 MK2 MIDI controller. This stand offers a host of features that make it an excellent choice for DJs, musicians, and producers who require an ergonomic, stable, and portable solution.

The stand is carefully crafted to provide an optimal working position for the controller, allowing for comfortable access to all knobs, faders, and buttons. Its ergonomic design ensures that you can use the controller for extended periods without straining your wrists or arms.

Stability is a key feature of the AKAI APC 40 MK2 Controller Stand. It is built with a sturdy and durable construction, ensuring that your controller remains securely in place during intense performances or studio sessions. You can confidently engage with the controls, knowing that the stand will provide a reliable platform.

Additionally, this stand excels in terms of portability. It features a lightweight and compact design, making it easy to transport from one location to another. Whether you’re going to a live gig, a studio session, or simply moving between different workspaces, the stand’s portability ensures that you can conveniently take it with you without any hassle.

In summary, the AKAI APC 40 MK2 Controller Stand is a superb product that combines ergonomic design, stability, and portability. It offers a comfortable and accessible platform for your APC 40 MK2 controller, making it an ideal choice for DJs, musicians, and producers who value convenience and performance.

Notes: Collabing with YouTube sensation Andrew Huang, Endorphin.es offer up this impressive multipurpose processor module. Building blocks of stereo filtering, compression, reverb and more offer huge creative potential.

Supplier's Notes:
In collaboration with Andrew Huang, based on his modern music production techniques, Endorphin.es developed a creative audio processor with multiple blocks that can be moved around in order to achieve different flavours for sound design.

Processing unit without fixed structure: intuitively create astonishing and ephemeral timbres, from atmospheric rumbles to heavy or distorted textures.
Creative stereo effect processor with delay, reverb, filter and distortion with quickly explorable routing chain with single button press.
New generation ARM Cortex - M7 processor with 96 kHz 32 bit internal processing.
Lush hall and whooshing reverse reverbs with audio freeze and pre-delay.
Sidechain audio ducking envelope available both internally and externally with additional one knob single band compressor.
Tap delay with maximum delay time up to 2.5 seconds, external clock input with onboard clock divider and 1v/oct time control.
8x oversampled distortion algorithm.
Pre- and post - VCA, tone and volume controls with extra gain.

Power consumption
135 mA +12V
35 mA -12V
0 mA 5V

Dimensions
16 HP
26 mm deep with power ribbon cable connected.

Notes: The Furthrrrr Generator has a main oscillator (carrier) with an extensive and fully voltage controllable wave multiplier and a modulation oscillator (modulator) that can cross-modulate the carrier. Each oscillator has hard and soft sync and also features an integrated tuner: if both LEDs are lit the VCO is at note A. Left LED is lit at note Ab and right LED at A#. Frequency potentiometers are ten-turn models and thus allow for easy tuning. Frequency range of the VCOs is 10Hz-10kHz (and much lower in modulator's LFO mode). Both VCOs feature 2 frequency CV inputs (1x with bipolar attenuator, 1x with 1V/octave), one FM input (jumper selectable between linear and exponential FM) as well as separate input for hard and soft sync. The voltage characteristic can be selected between 1V/octave and 1.2V/octave (Buchla norm).

The main oscillator (carrier) outputs the waveforms sine, saw, square and white noise. The two outputs marked with the magic eye are outputs of the "harmonic section" that generates very complex sounds by the wave multiplier and its parameters symmetry, order and Furthrrrr in the module's right-hand section. Symmetry lowers the level of even harmonics and amplifies the odd harmonics (this affects the pulse wave's width as well). Order adds saturation to the high order harmonics and resembles a low pass filter. Furthrrrr alters the level of harmonics set by the other parameters and produces very interesting, partly brute sounds with lots of harmonics by clipping and folding the wave. All three parameters can be voltage controlled. The carrier oscillator also has inputs for hard and soft sync, the sync-switch can synch directly to the modulator.

The modulation oscillator (modulator) has three wave forms with direct outputs: sine, saw and square. Using the internal modulation via the "mood section" the waveform is selected with a button; an additional staircase wave form is available here, but it can be overridden by inserting a signal into the external input socket. A switch activates the LFO mode.

The Mood section is responsible for the internal modulation of the carrier by the modulator. Switches determine the modulation destination(s) that can be activated simultaneously. These are the Furthrrrr parameter of the harmonic section, the amplitude and the frequency of the carrier oscillator. The "balanced" switch activates the ring modulation between both VCOs. intensity of modulation is controlled by the "mood index" potentiometer and the according CV input with bipolar attenuator.

Notes: The Meng Qi DPLPG is a Dual Passive 1-pole vactrol based Low Pass Gate/VCA in modest 2 HP. No power is required as the design is completely passive.

Handpicked components ensure that the modules will be musical.

Feed it a trigger and enjoy the natural smooth decay of a vactrol.

Notes: SINGOLI is a 7 channels DC coupled active combiner with an analogue transient detector output.

All the inputs I are equipped with LED meters and a dedicated attenuating potentiometer.

O will give you the combined mixed output.

T is an additional transient detector out that will fire only when a certain threshold is detected from the sum of all the inputs.

The toggle switch activates or deactivate the internal connection to Tutto&Sempre when the two modules are paired together thanks to the included JST cable.

Features

DC coupled mixer with 7 inputs and individual attenuators.
Intensity sensitive LED meters on all the inputs.
Analogue transient detector output.
Toggle switch to activate / deactivate its normalization to Tutto&Sempre.
"Whatever" power connector a.k.a. don't mind the polarity.

Technical Specs

Width: 6HP
Depth: 25mm
15mA +12V
10mA -12V

Notes: 2mm thick aluminium panel, in bath-anodized finish, with high-quality light-grey printing.

Notes: V Haus features 256 Deep House chords formed, structured and shaped from a variety of classic and modern day synths by Voltage Disciples chief sound designer Richard Somerville. The chord structures have been especially chosen to provide the configurations often used in Deep House and provide a starting point or stepping off point for complex chords in the modular environment. Some samples have subtle delays and reverbs which add characteristics often found in Deep House whilst others remain dry to allow the user further experimentation with modular delay's, reverbs and FX etc. With ONE's tape-like pitch control these chords turn into beautiful pads and bass material inside the modular.

Notes: What started as a simple plan to develop a new line of patch cables, quickly became an engineering feat in typical Joranalogue fashion. After countless hours of stripping cables, benchmarking crosstalk and high frequency performance, and designing in-house cable testing tools, Patch is the result of these efforts.

Patch is a series of top-quality patch cables for the discerning modularist, available in black and white, and a variety of lengths. Constructed using a custom-made coaxial base cable and over moulded mini-jack plugs, protected by unique laser-cut aluminium shells, these Eurorack cables are designed to outlast and outperform.

Lengths 15, 30, 60 and 90 cm are available in 8-packs, while the extra-long 150 cm cables are supplied in 4-packs.

Premium patch cables with 3.5 mm mono mini-jack connectors for Eurorack modular synthesiser use.
Engineered for audio, CV as well as analogue video signals.
Unique anodised aluminium shells and heavy duty bend reliefs for long life span.
7 inner signal and 40 outer shield conductors of 100 % ultra-pure oxygen free copper.
Extra-flexible PVC outer sleeve: satisfying 'droop' without crinkles.
Safely packaged in a reusable cotton bag with branded hook-and-loop cable tie included.
Incredibly fun to patch with. (Seriously!)
Designed in Belgium; made in China.

Notes: Really clever noise-based oscillator from AJH. Drones, sweeps and bleeps aplenty, ranging from tamed to out-of-control filth. Also doubles up as a more conventional ring mod and distortion module.

Supplier's notes:
This 14HP wide module is a voltage controlled noise based oscillator, or noisillator for short. It generates 1/f noise and this is then sent through a feedback loop which allows the noise to be "tuned" to varying degrees depending on the settings of the frequency and resonance controls, or incoming frequency or resonance CV's. The tuned circuit can be FM modulated too, for some thunderous sweeping sounds. We have bright and dark outputs, which are pre and post filter respectively. The Bright output will always have a degree of noise present in the signal, whereas the Dark output can be tuned noise only when 4 pole resonance is selected. We also have an external Sync input, which will reset the resonant waveform, and we also have an Audio input, so that an external signal can be mixed into the resonant loop. Combinations of external waveforms to these two inputs can create some massive drone sounds, or sweeping sync sounds.

There is also an XOR ring modulator, which can be used as a module in its own right too. Lastly, we have an XOR amplifier, which is another independant circuit that can be used to add noise and distortion to any audio signal.

Notes: The ISLA Instruments Caladan Is an expandable 8-part analogue/digital multi-timbral desktop synthesizer module boasting multiple synthesizer engines by way of voice cards. Sharing much of its DNA with Isla's S2400 desktop sampler and the Futuresonus Parva MPE Synthesizer, released in 2015.

Without any voice cards installed, the Caladan has its own internal digital synthesizer engine with playback capabilities of Soundfont (.sf2) and SFZ multisample formats, with the added benefit of being able to run a (possibly multiple) plugin based synthesizer (VST, LV2, CLAP formats). Isla's target for this is 32-Voices (subject to change).

Voice Cards

Caladan has internal slots for up-to 8 voice cards, accessible via an easy access 'trap door' underneath the unit. Said cards are able to be essentially any type of synthesizer, be that pure analogue, digital or a hybrid of both. The voice card API will be open sourced with development kits made available, allowing other designers and developers to create synthesizer cards for use in the Caladan.

At launch, an improved version of the original Parva voice card will be available, the specifications of which are as follows:

Oscillators
3 Digitally-controlled analogue oscillators per voice
Sawtooth, triangle, and PWM waveforms
Variable-width saw waves
Tunable +/- 5 octaves
Hard Syncable
Independent level controls
Envelopes
4 4-stage (ADSR) envelopes per voice
Exponential curves for punchy attack and natural decay
Linear mode also available
Loopable envelopes
Routable to >40 destinations
Modulation
4 LFOs per voice
Sine, sawtooth, triangle, and square waveforms
Random sample-and-hold
Stepped LFOs
Free-running or key-synced
Routable to >40 destinations
Polyphonic Aftertouch
Filters
2 configurable voltage-controlled filters per voice
24db or 12db low-pass or high-pass modes
12db bandpass mode
Self-oscillating
Filter FM

Further Cards
Additionally, Isla also have the intention of creating the following voice cards.

Dual OPL3 4op FM card with analogue filters/VCAs (already in development)
SEM / OB-X card (already in development)
Analogue Percussion card
Mini Moog card
SH-101 card
String machine card
TB-303 Card

More Specifications
MPE Support
RGB led rings (yes, you can change colours) enabling simultaneous viewing of parameters across different voices/cards per knob.
USB Host and Device ports, both class compliant for MIDI controllers.
Standard MIDI DIN In/Out/Thru
4 x independent CV & Gate inputs
8 x Stereo output busses
Main & Sub Mix outputs
High quality steel/aluminium enclosure, comparable in build/looks to the S2400 (and compatible with the same side panels for wood lovers)
Universal mains powered (100-250v AC)