Search Juno

FORTHCOMING

Related products...

MachineRoom Trilobite Triple Analogue Saw-Core Oscillator Module (LFO/noise/oscillator module)

Triple analogue saw-core oscillator module - 26HP

Notes: TRILOBITE is a triple oscillator analogue module inspired by the original Moog schematics and made with thru-hole components only.

The module features:

- 4 octave ranges
- 3 waveforms (triangle, square, saw),
- UNISON (FINE) control with a range of +/- 12 semi-tones
- Independent LIN FM and PWM inputs with attenuators
- White noise source

Independent audio output is provided for each oscillator. A mixed output is also present featuring a level control.

We are recommended to use independent audio outputs to avoid distortion, in this case MiX output works as WHITE NOISE source with attenuator.

V/oct input of the first oscillator is normalled to all 3 oscillators, so OSC2 and OSC3 would track it too, however, connecting other signals to the other V/oct inputs make each input independent.

The minimum frequency of each oscillator is as low as 3Hz which makes it possible to use them as LFO.

Each oscillator tracks up to 9 octaves.

V/Oct range: 0-10 V

NB: Trilobite as is a full analogue module so should be allowed 5-7 minutes to warm up before use.

* 26HP
* skiff-friendly (25mm depth)
* 200 mA +12V
* 180 mA -12V
* 0 mA +5V
hand-built in Kyiv, Ukraine

coming soon $357.85

(No payment required now - pay when released)

FORTHCOMING

Related products...

MachineRoom Prodigy Dual Analogue VCO Module (LFO/oscillator/dual/stereo module)

MachineRoom

Cat: 983141 • View all Synth modules

Dual analogue voltage-controlled oscillator module - 20HP

Notes: MachineRoom PRODIGY DUAL VCO is an analogue dual oscillator based on the legendary Moog Prodigy synth schematics. MachineRoom improved Bob's design by incorporating ICs with better thermal stability, increased the range of secondary oscillator, and also added cross-modulation possibility. As usual for this limited run of full-analogue handmade modules, MachineRoom used only thru-hole components.

The module features 3 octave registers and 3 waveforms per oscillator.

OSC1 generates SAW, SQUARE, and TRIANGLE waves with 8, 16, 32 octave registers.
OSC2 generates SAW, PULSE, and TRIANGLE waves with 4, 8, 16 octave registers.

Unlike the original version, PRODIGY DUAL VCO allows switching OSC2 to the LFO mode to modulate OSC1 or other parameters (LFO range is from 0.1 Hz to 8.6 kHz). Precise pitch tracking is up to 7 octaves.

PITCH control has a range of +/- of 1.5 octaves with a central point (to have the ability to quickly return to the initial frequency with precision). The rise/fall time of the GLIDE/SLEW is up to 5 seconds

HARD SYNC switch allows syncing the phase and frequency of oscillators.
LINEAR FM input has a built-in attenuator.

OSC2 UNISON control has a range of +/- 7 semi-tones (increase/decrease relative to the Detune central point).
OSC2 V/Oct Tracking switch activates or disables the OSC2's LFO mode. When disabled, OSC2 stops v/oct tracking, and the UNISON knob becomes a control for the LFO frequency.
OSC1 - OSC2 FM switch enables OSC2 as an OSC1 modulator.

When HARD SYNC is switched ON, Pitch/Sync knob controls the phase of oscillators.

The output level of each oscillator is about 3.5V which allows passive mixing. PRODIGY DUAL VCO is analogue so should be allowed 5-7 minutes to warm up before use.

Skiff-friendly design.

Thru-hole components only

20HP / 35mm deep

Current consumption:
+12V - 125 mA
-12V - 105 mA
+5V - 0 mA

Hand-built in Kyiv, Ukraine

coming soon $324.66

(No payment required now - pay when released)

FORTHCOMING

Related products...

Boss RV-500 Reverb Effects Pedal (time effects pedal)

BOSS Corporation

Cat: 1005726 Rel: 30 Jun 24 • View all Effects pedals

Reverb effects pedal

~~MRP:$441.87~~ SAVE 23%
est. release 30 Jun 24 $340.21

(No payment required now - pay when released)

FORTHCOMING

Related products...

Mackie DLZ Creator XS Compact Adaptive Digital Studio Mixer (digital studio mixer)

Mackie

Cat: 1001844 Rel: 31 May 24 • View all Studio mixers

Compact adaptive digital studio mixer

Notes: Introducing the podcast mixer that adapts to you.

The DLZ Creator XS compact adaptive digital mixer for podcasting and streaming enables you to get the results you want-faster than ever.

Inspired in part by smartphone and DSLR cameras that make great results accessible to anyone, DLZ Creator XS transforms the on-screen controls to meet your creative style or skill level-without compromising processing power or sound quality.

Three versatile modes

DLZ Creator XS features the same DSP processing power and features of the larger DLZ creator model, now in a compact design that doesn't sacrifice on capability.

Easy

A no-fuss user interface that offers the fastest path to recording your first podcast. For those who want to get great results without menu-diving.

Enhanced

Expanded control over your sound and mix. For those who want some customization without an overwhelming number of options.

Pro

Total control and fully customizable. For those who know what they want, and how to get it.

Built-in smarts

More than a digital mixer

DLZ creator XS is designed to help you become a better content producer.

Mix Agent is your personal audio assistant that guides you through setup and sound check, so in a few button presses you'll be recording.

AutoMix manages levels for up to four mics so everyone can be heard-even when they speak at the same time-which is a big help when you're busy hosting a show with multiple guests or hosts.

Using Mix Minus with your Bluetoothr-connected smartphone lets you add a caller into the mix with no audible echo when they speak.

Ins and outs of producing

2 PC Setup with NDI

Using an Ethernet cable, connect DLZ Creator XS to your router - the same router connected to your computer. Install the NDI Tools software, and DLZ Creator XS becomes an audio input and output on your NDI network.

Record/stream to computer, SD card

DLZ Creator XS is more than a podcast mixer or audio interface. Use it to record or stream multitrack audio to a computer via USB-C or an NDI connection, or straight to SD card for a truly self-contained setup.

All the power of a DLZ creator in a compact format

Connect up to 2 microphones and 3 external devices-including a smartphone-using analogue, Bluetooth, or USB.

The ins and outs of producing

A professional studio mixer for your desktop

DLZ Creator XS harnesses decades of Mackie expertise, making every detail count for your productions. From Onyx80 preamps that make even low-output mics sound both loud and pristine, to customized headphone mixes for each of your guests, DLZ Creator XS gives you the benefits of a professional studio mixer without the steep learning curve.

Ready for what's next

A portable and versatile podcasting interface

As a content creator, you know that flexibility is key. No matter how you like to create, the DLZ Creator XS podcast mixer supports you every step of the way. Record or stream to a computer via USB-C, or skip the computer and record full multitrack audio to an SD card for a truly self-contained setup.

Mackie knows creators

For decades, Mackie has provided musicians, DJs, and multimedia producers with the tools to create. From bedroom studios to the world's biggest festivals, Mackie mixers are literally everywhere. DLZ Creator XS puts all our knowledge into a new design for the next generation of creators.

Tech Specs

DLZ Control Modes, DLZ Mix Agent and Auto Mix technologies
7" high-resolution full-color touch display with anti-glare coating
2 discrete XLR/TRS combo inputs
Stereo channel with dual 1/4" TRS inputs
Stereo channel with 1/8" TRS connection
Stereo bi-directional Bluetooth channel
14x4 USB-C audio interface to Mac/PC
Record to MicroSD or USB Flash Drive
Professional audio processing (3-band parametric EQ, Noise gate, De-Esser, Compressor, Atomizer Reverb, Chronotronic Delay)
Fun and interactive voice-changing FX
Customizable pads for triggering samples, turning FX on/off, and executing commands (fade, duck, etc.)
Onyx80 mic preamps with up to 80dB gain
4 dynamically color-coded rotary encoders
5 potentiometers with dynamic LED level indication
Backlit mute, solo, and nav buttons
2 independent headphone outputs
Support for 9 languages
Pong? (yes, you can Pong on DLZ on your down time)

est. release 31 May 24 $484.39

(No payment required now - pay when released)

FORTHCOMING

Related products...

Beetronics Wannabee Dual Overdrive Effects Pedal (distortion effects pedal)

Beetronics FX

Cat: 1011578 Rel: 31 Jul 24 • View all Effects pedals

Dual overdrive effects pedal

Tags: Overdrive pedal

est. release 31 Jul 24 $328.80

(No payment required now - pay when released)

FORTHCOMING

Related products...

Folktek Alter 1 Effects Processor Module (delay/effect/filter/reverb/dual/stereo module)

Folktek

Cat: 983092 • View all Synth modules

Effects processor module - 16HP

Notes: Alter is an effects processor for Eurorack format. There are two versions of the Alter which are visually identical except the names "Alter 1" and "Alter 2". This is Alter 1. Internally, 1 & 2 have an entirely different set of effects from the other. Each version features 7 unique and meticulously designed DSP effects.

Control

- Controls for mix, X, Y and Sift as well as clock.
- All effects have a variation of a filter which may change effect to effect.
- X and Y control various rates, feedback and time over the different effects (note that some of the images shows a prototype which says "rate" under two of the pots. The faceplate has been changed to X and Y).
- Clock control adjusts the rate which controls the DSP which can drastically change the effect. In doing so it does slightly lower the quality of the output signal but the results are fantastic. This clock is not for synchronization.
- Mix, X, Y and Sift all have CV control inputs.
- Each control level or CV input is visualized on the control panel.

Ins and outs

- Stereo inputs with separate level/gain control for right and left channels. These levels can also act as mute as it can take the signal to 0. They can also add gain to a quiet signal.
- Peak level indicator for clipping levels at the input
- Mono input is made stereo within the DSP and outputs to both left and right channels
- Stereo outputs for right and left channels

Effects

The effect is selected by the hexagonal touch pad. The effects for Alter 1 are as follows:
1 - long delay
2 - tight, notated granular delay
3 - plate reverb
4 - shimmering reverb
5 - distortion multi-filter
6 - pitch delay
7 - stutter glitch

Specs

Includes printed manual
+12V: 160mA
-12V: 0mA
+5V: 0mA
16HP width
25 mm Depth

coming soon $301.84

(No payment required now - pay when released)

FORTHCOMING

Related products...

Folktek Alter 2 Effects Processor Module (delay/effect/filter/pitch shifter/reverb module)

Folktek

Cat: 983094 • View all Synth modules

Effects processor module - 16HP

Notes: Alter 2 is an effects processor for Eurorack format. There are two versions of the Alter which are visually identical except the names "Alter 1" and "Alter 2". This is Alter 2. Internally, 1 & 2 have an entirely different set of effects from the other. Each version features 7 unique and meticulously designed DSP effects.

Control

- Controls for mix, X, Y and filter as well as clock.
- All effects have a variation of a filter which may change effect to effect.
- X and Y control various rates, feedback and time over the different effects.
(note that some of the images shows a prototype which says "rate" under two of the pots. The faceplate has been changed to X and Y.)
- Clock control adjusts the rate which controls the DSP which can drastically change the effect. In doing so it does slightly lower the quality of the output signal but the results are fantastic. This clock is not for synchronization.
- Mix, X, Y and filter all have CV control inputs.
- Each control level or cv input is visualized on the control panel.

Ins and outs

- Stereo inputs with separate level/gain control for right and left channels. These levels can also act as mute as it can take the signal to 0. They can also add gain to a quiet signal.
- Peak level indicator for clipping levels at the input.
- Mono input is made stereo within the DSP and outputs to both left and right channels.
- Stereo outputs for right and left channels.

Effects

The effect is selected by the hexagonal touch pad. The effects for Alter 2 are as follows:
1 - Analogue delay
2 - Reverb with infinite capture and LP + HP filters
3 - Choral reverb
4 - Palindrome reverse delay - backward/forward repeat
5 - Time stretch
6 - Pitch shift (notated semi-tones)
7 - Time stretch glitch

Specs

Includes printed manual
+12V: 160mA
-12V: 0mA
+5V: 0mA
16HP width
25 mm Depth

coming soon $301.84

(No payment required now - pay when released)

FORTHCOMING

Related products...

Folktek Alter X Multi-Effects Pedal (multi-effects pedal)

Folktek

Cat: 983098 • View all Effects pedals

Multi-effects pedal

Notes: Alter X is the pedal version of Alter 1 eurorack module featuring four 1/4" jacks in addition to 1/8" as well as buffered switching that allows for trails.

Though it functions the same as other pedals, this pedal is a little different. Most pedals are made for guitars and then artists may choose to use them in different ways. Folktek made this pedal to work with either standard 1/4" jacks (for both input and output) or 1/8" (3.5mm) jacks for use with anything else. For those who like to use CV (control voltage) for any eurorack format, cv keyboard, or pedals which output cv (e.g. expression or sequencing), all four of the main knobs have cv inputs (mix, x, y, filter) so you can control your knobs without touching if the desire strikes you.

These pedals accept guitar, line or eurorack levels.

The enclosure is very thick, gold plated PCB (it's very, very tough).

Included power is standard for most pedals (2.1mm, -tip)

Folktek wanted a broad array of effects in each X and Y pedal so each is a mashup of effects which complimented one another when used together. Running X into Y or vis versa creates some powerful changes.

Control

- Controls for Mix, X, Y and Sift as well as clock.
- All effects have a variation of a filter which may change effect to effect.
- X and Y control various rates, feedback and time over the different effects (note that some of the images shows a prototype which says "rate" under two of the pots. The faceplate has been changed to "X" and "Y").
- Clock control adjusts the bitrate which controls the DSP which can drastically change the effect. In doing so it does slightly lower the quality of the output signal but the results are fantastic. This clock is not for synchronization.
- Mix, X, Y and filter all have CV control inputs.
- Each control level or cv input is visualized on the control panel.
- Buffered relay-based bypass over 1/4" ins and out.

Ins and outs

- Stereo 1/4" ins and outs.
- Stereo 3.5mm inputs with separate level/gain control for right and left channels. These levels can also act as mute as it can take the signal to 0. They can also add gain to a quiet signal.
- Peak level indicator for clipping levels at the input.
-Mono input is made stereo within the DSP and outputs to both left and right channels.
- Stereo outputs for right and left channels.

Effects

1 - long delay
2 - notated granular delay
3 - plate reverb
4 - shimmering reverb
5 - distortion and multi-filter
6 - pitch delay
7 - stutter glitch

Specs

- Power: 12v negative tip AC Adapter (included) - US - 100-240V ~ 50/60Hz 0.6A
- Dimensions: 6" x 5.1" x 2.2" (152.7mm x 128.5 x 56mm)

coming soon $351.63

(No payment required now - pay when released)

FORTHCOMING

Related products...

Folktek Alter Y Multi-Effects Pedal (multi-effects pedal)

Folktek

Cat: 983099 • View all Effects pedals

Multi-effects pedal

Notes: Alter Y is the pedal version of Alter 2 eurorack module featuring four 1/4" jacks in addition to 1/8" as well as buffered switching that allows for trails.

Though it functions the same as other pedals, this pedal is a little different. Most pedals are made for guitars and then artists may choose to use them in different ways. Folktek made this pedal to work with either standard 1/4" jacks (for both input and output) or 1/8" (3.5mm) jacks for use with anything else. For those who like to use CV (control voltage) for any eurorack format, cv keyboard, or pedals which output cv (e.g. expression or sequencing), all four of the main knobs have cv inputs (mix, x, y, filter) so you can control your knobs without touching if the desire strikes you.

These pedals accept guitar, line or eurorack levels.

The enclosure is very thick, gold plated PCB (it's very, very tough).

Included power is standard for most pedals (2.1mm, -tip)

Folktek wanted a broad array of effects in each X and Y pedal so each is a mashup of effects which complimented one another when used together. Running X into Y or vis versa creates some powerful changes.

Control

- Controls for Mix, X, Y and Sift as well as clock.
- All effects have a variation of a filter which may change effect to effect.
- X and Y control various rates, feedback and time over the different effects (note that some of the images shows a prototype which says "rate" under two of the pots. The faceplate has been changed to "X" and "Y").
- Clock control adjusts the bitrate which controls the DSP which can drastically change the effect. In doing so it does slightly lower the quality of the output signal but the results are fantastic. This clock is not for synchronization.
- Mix, X, Y and Filter all have CV control inputs.
- Each control level or CV input is visualized on the control panel.
- Buffered relay-based bypass over 1/4" ins and out.

Ins and outs

- Stereo 1/4" ins and outs.
- Stereo 3.5mm inputs with separate level/gain control for right and left channels. These levels can also act as mute as it can take the signal to 0. They can also add gain to a quiet signal.
- Peak level indicator for clipping levels at the input.
- Mono input is made stereo within the DSP and outputs to both left and right channels.
- Stereo outputs for right and left channels.

Effects

1 - analogue delay
2 - reverb with infinite capture and LP + HP filters
3 - choral reverb
4 - palindrome reverse delay - backward/forward repeat
5 - time stretch
6 - pitch shift (notated semi-tones)
7 - time stretch glitch

Specs

- Power: 12v negative tip AC Adapter (included) - US - 100-240V ~ 50/60Hz 0.6A
- Dimensions: 6" x 5.1" x 2.2" (152.7mm x 128.5 x 56mm)

coming soon $351.63

(No payment required now - pay when released)

FORTHCOMING

Related products...

Tangible Waves AE Modular VSYSTEM-2 Wavetable Synthesiser With Effects Processor (modular synthesiser complete system)

Tangible Waves

Cat: 1010403 Rel: 30 Jun 24 • View all Synthesisers

Wavetable synthesiser complete system with effects processor

est. release 30 Jun 24 $382.75

(No payment required now - pay when released)

FORTHCOMING

Related products...

Tangible Waves AE Modular VSYSTEM-3 Drum Synthesiser With Sample Player (modular synthesiser complete system)

Tangible Waves

Cat: 1010406 Rel: 30 Jun 24 • View all Drum machines

Drum synthesiser complete system with sample player

est. release 30 Jun 24 $368.22

(No payment required now - pay when released)

FORTHCOMING

Related products...

ADDAC System ADDAC508 Swell Physics Module (CV modulation/quad module)

ADDAC System

Cat: 993830 Rel: 30 Apr 24 • View all Synth modules

A CV generator based on the simulation of a physical system, ocean swells

Notes: Following ADDAC's ADDC503 Marble Physics here is a new simulation of a physical system. This time, imagine a small area in the middle of the ocean, in this area we place 4 equally spaced buoys anchored to the bottom in such a system that we can control the spacing between the buoys. Imagine we can control the elements and agitate the waters at will which in turn will make the buoys move up and down as the water surface moves.

Finally imagine the buoys would wirelessly transmit their absolute height directly to your module outputs where they would be mapped to a voltage signal.

ADDAC use a Gerstner Wave as the motor behind the two-dimensional wave generation. In fluid dynamics a Gerstner Wave is described as "a progressive wave of permanent form on the surface of an incompressible fluid of infinite depth". Gerstner waves are often used in computer graphics to simulate any type of water surface, if you've seen any animation film or computer game with water surfaces in it most probably it features a Gerstner wave generating it.

Tech Specs:

10HP
4.5cm deep

70mA +12V
40mA -12V

est. release 30 Apr 24 $341.26

(No payment required now - pay when released)

FORTHCOMING

Related products...

KMA Machines Endgame Duality Calibrator Effects Pedal (amplifier modeling effects pedal)

KMA Audio Machines

Cat: 995968 Rel: 30 Apr 24 • View all Effects pedals

Duality calibrator effects pedal

Notes: After years of development work, ENDGAME is KMA Machine's most ambitious creation to date. A highly flexible and comprehensive solution for the end of your signal chain, ENDGAME is a superb problem solver and a convenient creative companion.

Talk about feature packed! With an integrated Stereo FX loop, KMA's proprietary True Double-Tracker doubler and own DUAL IR cab with power amp simulation, an Aux Input (also via Bluetooth), real pro-level XLR outputs and extensive routing options, ENDGAME really is a powerhouse for your board, whether touring as a fly rig or practicing at home with headphones.

And now, you can finally use all your stereo devices with just one easy to use and compact product - let the alchemy begin!

It's no secret that over the past few years stereo pedals have become a huge part of many musician's rigs. While many regular tones can (and should) be mono, KMA are very much fond of stereo effects. But why is it so hard to use them either at home or on the stage? Without the luxury of 2 amps (plus the ability to turn them up if you have them) or for owners of cab/amp simulators that are usually mono input by design, monitoring stereo effects properly can end up being so difficult that many just end up running their stereo effects in mono and therefore lose many of their spatial creativity nuances.

Doubling guitars in recording is also a common practice in a variety of musical styles. In many cases, a single guitarist will record the same track twice with each separate recording being spread to the left and right channels. The effect of this is unmistakable to the ear and the slight differences and nuances between the two separate performances complement each other to create a noticeable thickness, density and weight to the musical experience. This is hard to get sounding right live too. Note this is not the same thing as simple doublers (that just delay one signal with a modulation) or ADT type solutions that are on the market today.

So, KMA developed ENDGAME. KMA wanted to make an easy-to-use product that gives the essentials of good tone, nothing more and nothing less. While from the front panel it might look like ENDGAME has lots of controls, compared to many hidden menus and screens in many other products, all means that it is also deceptively simple to use, despite the huge complexity of what's going on inside!

Stereo FX Loop

A Stereo FX Loop isn't a new thing, but in ENDGAME's case it is probably one of the most usable, making this a killer feature!

For maximum flexibility, the serial loop features routing that can exist either before or after the IR loader and/ or Doubler (when active). Buffered for the sake of long cable runs and to maximise signal clarity, you can now hear your stereo pedals and other effects in their true pristine glory! Plus, you can quickly switch the loop on or off via the convenient soft footswitch.

True Double Tracker

Whether playing live or recording with a single instrument, the KMA ENDGAME's True Double Tracker provides the perfect solution for adding a "fatness" and "width" to your performances and really feels like you are playing the same riff twice!

Enabled via the footswitch, the doubler accurately replicates the minor differences that could exist within two separate recordings and the width control can spread your doubled tracks anywhere from completely centred (0%) to 50% left and right (centre indent) and 100% left and right split.

est. release 30 Apr 24 $362.00

(No payment required now - pay when released)

FORTHCOMING

Related products...

BOSS GT-100 COSM Amp Multi-Effects Processor Pedal (multi-effects pedal)

BOSS Corporation

Cat: 997471 Rel: 31 May 24 • View all Effects pedals

COSM amp multi-effects processor pedal

~~MRP:$475.06~~ SAVE 22%
est. release 31 May 24 $372.49

(No payment required now - pay when released)

FORTHCOMING

Related products...

Nektar Panorama CS12 Channel Strip Controller For Logic Pro (channel strip controller)

Nektar Technology

Cat: 1003602 Rel: 31 May 24 • View all MIDI controllers

Channel strip controller for Logic Pro

Notes: The Best Channel Strip Controller for Logic Pro

Panorama CS12 does what no other controller can do: Give full control of all Logic Pro channel strip parameters including plugins. There is nothing vanilla about Panorama CS12. The entire workflow is designed from the ground up, which enables astonishing features, with a workflow never seen on a control surface before.

High Resolution Fader with a Touch of Class!

A 100mm ALPS motorized fader follows the selected mixer channel when you work. With up to 14 bit resolution, you get detailed control with touch sensing enabling automation override and update captures in real time.

Paired with a dedicated pan control, as well as buttons for solo, mute and record arm, you have instant access to all main mixer parameters on the selected channel.

Create Clean Automation, Easy and Fast

Recording automation can get messy with lots of data generated even when a simple fader is needed. Panorama CS12 solves the problem by giving you the option to insert automation points.

Touch the fader, set the value with the fader, and done!

Jump to the next position in the timeline and insert another automation point. Clean, easy and fast.

Complete Insert FX Plugin Control

Panorama CS12 excels at controlling plugins. You can control any plugin without looking at the plugins' UI so you can focus on creating, composing and editing.

Many commonly used plugins are pre-mapped including of course Logic Pro's own. Panorama CS12 dedicates 12 RGB illuminated 360 pots, 4 display buttons and an additional 4 RGB LED buttons to plugin control. Every control can be assigned on multiple pages ensuring as a complete plugin experience, with no parameter left behind.

Via the ControlCore mapping system, it stores all settings in unique files so they can be ported to other computer systems and ensure compatibility with other DAWs in the future.

Any Plugin? ....Really?

Any plugin that presents its parameters for automation in Logic Pro, can be controlled from Panorama CS12. That includes Logic Pro's own plugins and any AU plugin hosted in Logic Pro.

There is no wrapper or plugin host. It just works.

Plugin Slot Selection

CS12 control insert plugins like no controller has ever done before. The 8 plugin slot select buttons are illuminated when plugins are present in the first 8 slots and the top button toggles between slots 1-8/9-16. Press a button and control the insert plugin immediately. Press another button and now control that plugin.

Control Any Parameter NOW

Control any parameter by simply clicking on it. The 100mm ALPS fader immediately jumps to the clicked parameters position and you take over from there. The fader or pan rotary, can be used to control any parameter in the currently selected Logic Pro channel, at any time.

Activate the Select button and the motorized fader now controls any parameter you click. Any mixer channel, instrument or insert effect plugin parameters. Click, control, click control. Super easy.

Plugin Parameter Learn

A plugin quick learn feature enables assignments on the fly. It's as simple as moving a parameter and moving a control to complete assignment. And while you are at it, change the LED colour of the control too.

Nektarine Map Creation

For the ultimate in control mapping, use the included Nektarine application/plugin. Assign parameters to controls using drag and drop, create your page structure and name parameters and pages so they are optimized for CS12. Once saved, plugin maps are picked up by ControlCore for use with CS12.

Precision control at 10x resolution

14 bit control resolution is not limited to the motorized fader. With the Fine button (magnifier icon) enabled each of the 12 pots control at 14 bit resolution. In practice this means you'll be able adjust parameters with the same fine grained values available through your plugins UI or up to 10 x regular control resolution.

Features & specifications

Panorama CS12

1 100mm ALPS motorized fader.
4 RGB LED control buttons.
6 segment LED meter.
3.5" TFT colour display.
4 display buttons.
4 channel strip LED buttons.
18 Function and navigation LED buttons
2 encoders for zoom and tempo.
1 encoder with push button for Data/Menu
13 endless or 360 potentiometers with RGB LED illumination.
11 RGB LED buttons for selection of channel strip sections.
1/4" TRS Footswitch socket for basic handsfree DAW control.
Connect up to two foot switches using TRS to TS Y-cable splitter.

System requirements

USB class compliant, no driver needed.
Nektar ControlCore installation required. Unit doesn't operate on its own.
A Nektar account for registration and download of support files.
USB Power Requirement: 500 mA minimum, connect to a USB high power port recommended.
MacOS: 11.5 or later.
Logic Pro: 10.7.8 or higher.

Dimensions & weight

39 cm (L) x 11,5 cm (D) x 3,2 cm (H), 0,49 kgs

In the box

Panorama CS12
Quickstart guide and functional overview. All other documentation is part of the download package.
USB A to C cable.

est. release 31 May 24 $363.03

(No payment required now - pay when released)

FORTHCOMING

Related products...

Old Blood Noise Endeavors Dark Light Dual Reverb Effects Pedal (limited edition) (time effects pedal)

Old Blood Noise Endeavors

Cat: 1003621 Rel: 31 May 24 • View all Effects pedals

Dual reverb effects pedal

Notes: Dark Light is a dual reverb featuring both Dark Star and Sunlight. With all the routing options you could want, including separate stereo, parallel mono, and series mono, Dark Light takes Dark Star’s dark pitch shifted, delayed, and bit crushed reverb voices and Sunlight’s bright modulated, comb filtered, and bandpassed reverb voices and combines them into one massive sound to take your time and drift away in. Each pedal maintains its core sound and control set, then expands from there.

Additional Controls

Wet and Dry volumes for each side (replacing the previous Mix control)

Spread to set the stereo spread, allowing Dark Star and Sunlight to blend into each other’s outputs

Hold switch to create indefinite reverb trails while the pedal is engaged

Hold toggle to choose between holding Dark Star, Sunlight, or both

Exp jack to control any combination of Ctrl 1, Ctrl 2, Decay, Decay, Rate, Depth, or Input with an external expression controller

Independent In and Out routing for each pedal, with automatic parallel mono when plugging into only one

Soft-touch Bypass footswitches for true bypass and minimal switch noise

Requires 9V DC center negative 2.1mm jack power supply capable of 150mA (not included).

The art of Dark Light is by Jon Carling.

est. release 31 May 24 $382.75

(No payment required now - pay when released)

FORTHCOMING

Related products...

Arturia Keylab Essential 88 MK3 88-Key USB MIDI Keyboard Controller (black) (USB MIDI keyboard contoller)

Arturia

Cat: 1003073 Rel: 31 May 24 • View all MIDI controllers

88-key USB & MIDI keyboard controller

est. release 31 May 24 $382.75

(No payment required now - pay when released)

FORTHCOMING

Related products...

Boss DD-500 Digital Delay Effects Pedal (time effects pedal)

BOSS Corporation

Cat: 1005716 • View all Effects pedals

Digital delay effects pedal

~~MRP:$441.87~~ SAVE 19%
coming soon $356.81

(No payment required now - pay when released)

FORTHCOMING

Related products...

Boss MD-500 Modulation Effects Pedal (modulation effects pedal)

BOSS Corporation

Cat: 1005723 • View all Effects pedals

Modulation effects pedal

~~MRP:$441.87~~ SAVE 23%
coming soon $340.21

(No payment required now - pay when released)

FORTHCOMING

Related products...

CubuSynth Engine v2 Dual Complex Oscillator Module Wth Chaos (dual/stereo/oscillator module)

CubuSynth Modular

Cat: 1006090 Rel: 30 Jun 24 • View all Synth modules

Dual complex oscillator module wth chaos - 24HP

Notes: The CubuSynth Engine V2 is their updated dual analogue VCO with wave shaping functions, internal modulations and a chaos generator. It is based around the 3340 chip and features 4 Waveforms + Wavefolder per VCO and 4 Modulated Outputs, all simultaneously.

The CubuSynth Engine can work as 2 independent VCOs, or as one complex FM oscillator.

With its internal "Chaos Engine" it creates semi-random voltages, generated by the 2 oscillator cores. This signal is then normalized to the CV inputs for Pulse width modulation and exponential FM.

Each of the 2 VCOs offers a switch to select one of the 4 waveshapes to be used by the wavefolders, and the linear FM input normalisations.

Features:

2 VCO cores (voices)
4 simultaneous wave forms per voice + 4 Modulation Outputs
Wavefolder per voice
Pulse Width modulation
Linear and exponential FM inputs
1 V/oct tracking stable over up to 10 octaves
Chaos generator with external clock input
Complex internal normalized modulations

Dimensions:
24 HP
24 mm deep

Current Draw:
87 mA +12V
74 mA -12V
15 mA 5V

est. release 30 Jun 24 $403.49

(No payment required now - pay when released)

FORTHCOMING

Related products...

Animal Factory Godeater+ Distortion Effects Pedal (distortion effects pedal)

Animal Factory Amplification

Cat: 1008025 Rel: 30 Jun 24 • View all Effects pedals

Distortion effects pedal

est. release 30 Jun 24 $320.51

(No payment required now - pay when released)

People also bought...

Sennheiser HD 490 PRO Professional Reference Studio Headphones (B-STOCK) (studio headphones)

Sennheiser

Cat: 1012530 Rel: 01 Jan 90 • View all Studio headphones

B-STOCK: Box opened, product in perfect working order

Notes: ***B-STOCK: Box opened, product in perfect working order***

Intended as an all-rounder for all production purposes, the HD 490 Pro are built for comfort as well as top-notch sound quality thanks to their open-back design. DearVR MIX-SE software allows you to mix, monitor and master with accuracy.

Supplier's Notes:
The perfect mix of clarity, comfort, and reliability, HD 490 PRO studio headphones are built to handle all the complexities of today's music production. The open-back design delivers an extremely wide, dimensional sound stage and ultra-precise sound reproduction, eliminating audio blind spots and ensuring you're in full control of every detail.

Handcrafted and German-engineered with built-to-last components and a lightweight, comfortable design, HD 490 PRO lets you feel the music and forget about the headphones. Meticulously engineered ergonomics eliminate pressure points while the open-back design provides natural ventilation, making hours in the music feel like minutes. Two sets of switchable ear pads, each with a unique sound signature for long hours of mixing and producing, eliminate ear fatigue and are designed with sustainability and durability in mind - they're both washable and replaceable. HD 490 PRO mixing headphones also include the innovative DearVR MIX-SE plugin from Dear Reality, placing you in the "sweet spot" and turning your DAW into an ultimate virtual mixing environment. DearVR MIX-SE simulates the carefully designed acoustics of mixing studios, helping you ensure a balanced, consistent translation of your mix on different systems. HD 490 PRO helps you achieve your full creative vision, eliminating audio blind spots, putting you in full control of every detail, and ensuring accurate playback beyond the studio.

Features

Backed by decades of Sennheiser engineering, technology, research and development
Open-back design with an extremely wide, dimensional sound stage and ultra-precise localization
Uncolored frequency response for honest, dynamic sound reproduction across the full spectrum
Innovative low-frequency cylinder system for full, accurate, and clearly defined low end
Precision-engineered ergonomics eliminate pressure points and deliver supreme, flexible, lightweight comfort
Sennheiser Open-frame Architecture reduces total harmonic distortion (THD) and minimizes resonance,improving audio accuracy
Includes Dear Reality dearVR MIX-SE plugin, turning your DAW into an ultimate virtual mixing environment via advanced spatial audio technology
Two unique sets of ear pads for producing or mixing help eliminate ear fatigue and pinpoint frequencies

Sustainability-inspired with washable, replaceable pads and FSC-certified, forest-friendly packaging
Geometrically angled earcup design optimizes transducer placement for a consistent listening experience
State-of-the-art neodymium magnets for superior driver performance and efficiency
Patented cable coil structure blocks cable-borne noise, ensuring the clearest signal
Ultralight voice coil for remarkably authentic and dynamic audio reproduction
Right and left ear jacks with detachable cable easily adapts to any studio configuration
Patented accessibility features: braille-guided L/R earcups and grooved ear pads for eyeglasses
Open-mesh metal earpiece covers provide natural ventilation
Durable design meticulously engineered in Germany and hand-assembled in Romania

Specs

Weight (g): 260 gr. (w/o cable)
Max. Sound Pressure Level: l128 dBSPL (1 kHz @ 5% THD)
Sensitivity: 105 dBSPL (1 kHz/ 1 Vrms), 96 dBSPL (1 kHz/ 1 mW)
Transducer principle: Dynamic, open
Wearing Style: Circumaural

Total harmonic distortion: <0.2% (1kHz, 100dB SPL)
Connector: 3.5mm/6.3mm

Ambient Conditions

Operating Relative Humidity: 10 to 80%, not condensing
Operating Temperature: +0-CC

Electrical Properties:

Sensitivity: 105dBSPL (1kHz/1Vrms), 96 dBSPL (1kHz/1mW)
Impedance: 130 ohms (1kHz)

Dimensions

Weight (g): 260g (w/o cable)
Cable length: 1.8m

2 in stock $330.01

People also bought...

Arturia MicroFreak Stellar 25-Key Paraphonic Hybrid Synthesiser & Step Sequencer (limited edition) (hybrid synthesiser)

Arturia

Cat: 944111 Rel: 22 Jun 23 • View all Synthesisers

A hybrid synthesizer combining digital oscillators, analog filters, quirky modulation, a flat PCB keybed and expressive sequencing.

Notes: Stellar edition of the fantastic MicroFreak adds new features as well as a limited-edition paint job. Digital voices feed into the analogue filter to create a versatile hybrid sound engine.

Supplier's Notes:
MicroFreak Stellar is a hybrid synthesizer that combines digital oscillators, analogue filters, quirky modulation, a uniquely flat PCB keybed, and expressive sequencing with a subtly out-of-this-world aesthetic design.

Interplanetary synth explorer

Discover the same loveable hybrid beast that sent the synth world into a spin, but primed for launch and ready for an interplanetary sonic voyage. MicroFreak Stellar features the same inspiring, bonkers sound but embellished with a unique space-age design.

Digital, wavetable, sampling, granular...

Treat yourself to only the weirdest & most wonderful paraphonic synth sounds with MicroFreak's multimode sound engine. Choose from numerous algorithms, including Wavetable, Chord, 4 new Sample & Granular engines and many more, and immediately customize your patches with 4 intuitive con-trols and real-time visual feedback.

Multi-mode analogue filter

Unlock truly unique hybrid tones by combining MicroFreak's digital sound engines with a crunchy resonant analogue filter, inspired by the classic Oberheim SEM. With low-pass, band-pass, and high-pass modes, you can make this 'Freak whisper, scream, or launch into self-oscillating orbit.

Modulation matrix

Quickly rewire MicroFreak's architecture and delve deep into complex sound design with its modulation matrix, offering up to 7 simultaneous destinations and 5 sources, including an ADSR envelope, cycling envelope, and 6-shape LFO.

Sequencing & randomization

Blur the lines between sequencing & arpeggiation and create spontaneous melodies, motifs, and rhythmic patterns on the fly. MicroFreak encourages musical exploration, expression, and evolution with its unique Spice & Dice randomization feature, ribbon controller, and 4 lanes of automation.

A unique keybed

Change the way you play and unlock fresh musical expression with MicroFreak's distinct PCB keyboard. It's flat, it's fast, and it's fit for everything from lightning-fast solos to instant arp creation; not only is it pressure sensitive, but it offers poly-aftertouch too!

What's in the box

Box content

MicroFreak Unit
Universal PSU
Registration card
2x MIDI port adapters

Instrument dimensions

Size : 12.2 x 9.2 x 2.2 inches (311 x 233 x 55mm)
Weight : 2.3 lbs. (1.02 Kg)

7 in stock $309.10

People also bought...

Red Panda Radius Ring Modulator & Frequency Shifter Effects Pedal (modulation/pitch/frequency effects pedal)

Red Panda Lab

Cat: 995385 Rel: 13 Mar 24 • View all Effects pedals

Ring modulator & frequency shifter effects pedal

Notes: Something a bit different here. Red Panda's Radius combines ring mod and frequency shifter circuits with pitch tracking and modulation. Controllable chaos which delivers unique bell-like tones, atonal phaser sounds and much more.

Supplier's Notes:
Ring modulator / frequency shifter.

The Radius is a ring modulator and frequency shifter with pitch tracking and an advanced LFO. It is designed around a novel "eight-quadrant multiplier" algorithm that smoothly transitions from ring modulation to frequency shifting and allows different frequency ratios for the upper and lower tones. Radius puts complex harmonic structures, bell-like tones, metallic textures, frequency shifting, soft tremolo, and bubbly phaser sounds at your fingertips.

A ring modulator multiplies two signal signals together to create new frequencies that are the sum and difference of the input frequencies. One signal is your instrument, and the other is an internal oscillator. The Radius can double the sum or difference frequency ratios and adjust their relative levels, unlocking a spectrum of timbres beyond traditional ring modulation.

Pitch tracking, a push-to-tune footswitch, and picking dynamics make the Radius responsive and predictable on stage. Hold the left footswitch and play a note to tune the carrier oscillator to that note. Pitch tracking maintains the pitch ratio as you play up and down the scale, or tracks by a ratio (or inverse) for more dynamic sounds. An expression pedal can be assigned to any combination of knobs.

The Radius has an advanced LFO with triangle, square, random waveforms and an eight step sequencer, all of which can be envelope triggered. The envelope follower makes it responsive to playing dynamics, and two "X" modulation waveforms create sweeping spectral changes.

Well-spaced controls and stereo input/output make the Radius perfect for sound design, synths, and creative mixing. A full MIDI implementation allows you to sync to MIDI clock, sequence parameter changes, and play the carrier oscillator from a keyboard.

The Radius is a musical ring modulator and frequency shifter that transforms the timbre of your instrument in new ways. With deep features and intuitive control, Radius modernizes classic electronic techniques for the future.

Dimensions: 3.1" x 4.75" x 2.5" (with knobs)
Shipping dimensions: 5.2" x 3.75" x 3.0"
Shipping weight: 1.1 lbs

Requires a 9V DC 250 mA power supply (not included).

Tags: Modulation pedal | Pitch shifter pedal

3 in stock $342.28

Click for better price!

or call +44 20 7424 1960
quote 995385

People also bought...

Make Noise 0-CTRL Semi-Modular Desktop Controller & Step Sequencer (semi-modular desktop controller/sequencer)

Make Noise

Cat: 776070 Rel: 04 Jun 20 • View all Sequencers

The Make Noise 0-CTRL is a patchable, clockable controller and step sequencer for voltage controlled synthesiser systems.

Notes: Brilliantly innovative sequencer from the renowned synth brand. Huge creative potential in the studio and live settings. Ideal for use with analogue synths and Eurorack.

Supplier notes:
The Make Noise 0-CTRL is a patchable, clockable controller and step sequencer for voltage controlled synthesizer systems. Designed to be patch pals with the 0-Coast, it is a tabletop device whose inputs and outputs follow Eurorack standards, making it also a great partner for a modular system or another patchable tabletop synth.

Power Requirement: +15VDC on 2.1mm Tip Positive Connector
Includes Power Adapter, Patch Cables

Tags: Step sequencers | Modular sequencers

More than 10 in stock $392.07

Click for better price!

or call +44 20 7424 1960
quote 776070

People also bought...

Conductive Labs The NDLR v2 MIDI 4-Track Sequenced Arpeggiator/Chord & Drone Player (MIDI arpeggiator)

Conductive Labs

Cat: 968112 Rel: 10 Oct 23 • View all Sequencers

Multi-part MIDI Arpeggiator.

Notes: Second-generation version of the 'noodler' device from Conductive Labs, the NDLR v2 aims to simplify music theory and unlock creative ideas, making it easy to create and perform arpeggios, drones, chords and other patterns. Hook up to your synths and software over MIDI, USB or analogue clock.

Supplier's notes:

Conductive Labs have turned complex music theory into a killer synthesizer jamming MIDI controller. With four parts that can play up to 8 synths, you can make fantastic electronic music, such as soundscapes, electronica, ambient, electro, or techno to name a few. Whether noodling in your music space after work or jamming with friends, The NDLR can take your music to amazing places!

Press one of the seven chord buttons, and the two arpeggiators and drone follow the chord notes while your polyphonic synth sings with pads.

There are start and stop buttons for each of the four parts, and a button to start/stop all parts. And there's a "panic" button to stop all MIDI notes.

A colour LCD screen shows you everything that's going on. A very flat menu structure keeps menu diving to a minimum.

Pick a key, a mode and control the BPM of The NDLR's MIDI clock.

With two sets of 5 pin DIN MIDI inputs and outputs, and four USB MIDI virtual ports you have lots of ways to connect your MIDI devices. There is also CV clock in and out connectors to sync with your Korg Volcas, modular or semi modular synths.

It works with MIDI hardware synths, and your DAW or tablet, if that's your thing.

Once you master the basics, dive into the 8x modulation matrix. It lets you animate most of The NDLR's parameters. You can even send LFOs to your MIDI gear.

The NDLR includes a Pattern editor to make arp and modulation patterns, a rhythm editor and now a Chord Sequencer too! Once you have your perfect piece, you can save your patches.

What's new in The NDLR (v2)?
By popular demand, a soft-power button has added. The NDLR (v2) is powder coated with a black faceplate and beautiful red base. And the internals were modified for a new, faster microcontroller. The feature set remains the same, though there are some surprises waiting to be discovered in the menus. So far, new features are being back ported to the original The NDLR via firmware updates, as long as it does not require the faster processor.

The Four Parts

The PAD part is a polyphonic chord player for getting beautiful PADs out of your favourite poly synth. Like all of the other parts, the PAD plays notes based on the selected global chord. When you press a chord button the notes stay on until you press the next chord or stop the part, so you can twist knobs on your synths or play a lead part on guitar. Change or modulate the chord octave position, note range, spread, and strum.

A really cool feature of the PAD part is the "Interleaved Poly-Chain". When enabled, this will send the chord notes to up to 4 MIDI channels in a round robin fashion. Really great for ethereal evolving patches on a multi-timbral synth, or for turning multiple mono-synths into a poly synth! Six voices from 2 Volca FMs? Sure!

There are two "Motifs" which are extremely versatile sequenced arpeggiators. Select a pattern for each one and press Play! Independently tweak on clock division, pattern length, octave position and more. You can create your own patterns with the onboard pattern editor, and add rhythm with the onboard Rhythm editor. The motifs play the notes contained in the currently selected chord, so you don't need to pick notes on a keyboard. The NDLR supports a 10 to 300 BPM clock so play as fast or slow as you like, or use an external clock source.

The Drone part can play a single continuous note like a traditional drone does... or choose from various retrigging options, such as having the note retrigger on a chord change, the down beat, every beat, up beat, etc. You can also choose to add a 3rd and/or 5th note to the root note for a polyphonic drone. Or have the drone play a thundering kick drum if you want to.

Hardware

Requirements:

USB Power Supply not included; The NDLR (v2) runs on 5V DC, 140mA. The original is 90mA.
The NDLR comes with a 6 foot USB cable. You can purchase longer or shorter cables as needed, with USB A to USB B connectors. Users of newer Macs may need to purchase a USB B to USB C cable or use an adapter.
MIDI Synthesizer(s); The NDLR is a MIDI playing device, it doesn't make any sound on its own, it sends MIDI messages to your MIDI sound modules. It can play most anything with MIDI input including vintage synths, modern synths, mono and polyphonic synths, software synthesizers, on an iPad, PC, stand-alone or VSTs in a DAW. Note that some vintage synths or synths with poor MIDI implementations may be prone to getting stuck notes. Use the Panic button on The NDLR when needed.
To connect many synths, and for the best MIDI timing we recommend using an active, 1 input to 4 or more outputs MIDI thru device or MIDI router, such as the MRCC.
The NDLR has rich velocity controls if your synths support velocity, not all do.
The NDLR can be controlled with an external MIDI controller or sequencer. See The NDLR Setup Examples in The NDLR User Manual for details.

Physical Layout:
Dims: Size 9"W x 6.3"L x 2.8?H (22.8 x 16 x 7.1cm)
Color LCD Screen 1.8" (128×160)
8 Rotary Encoders w/ switch
7 Chord Buttons (degree / type)
4 Play/Pause Buttons (PAD, Drone, Motif 1, Motif 2)
Motif 1 or Motif 2 Select
Global Play/Stop Button
Shift & Menu Buttons
Recessed Firmware Update Button (upgrades via USB)

Physical Input/Output:
2x MIDI 5-Pin Inputs
2x MIDI 5-Pin Outputs
1x USB w/ 4 Virtual USB MIDI I/O ports + Power
1x Clock Out 1/8th inch jack
1x Clock In 1/8th inch jack
Limited Warranty:
The NDLR comes with a limited warranty to the original owner for 1 year (or the minimum time required by law in your country) from the time you received it.
Consumables, such as the USB cable and accessories have a 90 day limited warranty.

MIDI

MIDI-in Options:
Connect a MIDI keyboard or sequencer and The NDLR selectable transpose MIDI channel to transpose from the key of "C" to the current NDLR key & mode.
Use a MIDI keyboard or sequencer to select chords. Choose The NDLR "Control-In" MIDI channel. The white keys map to chord degrees I-VII. Optionally black keys map to the chord type. Sonority is automatic based on key & mode.
Most features of The NDLR can be controlled by inbound CC messages.
All notes and CCs pass thru except for The NDLR control channel.
With 2 MIDI 5 pin and 4 USB MIDI in and outs, The NDLR is a MIDI merger and a MIDI splitter. See the manual for details.
MIDI-out Options:
Selectable Drone MIDI-out channel (Off, Pad, 1-16). Pad choice means same as Pad channel.
Selectable Pad MIDI-out channel (1-16). Poly-chains play on next successive MIDI-out channel(s). Example: Pad MIDI-out ch = 4. Polychain = 1 - all pad notes on ch 4. Polychain = 2 - every two notes plays on channels 4/5. Polychain = 4 - every 4 notes plays on channels 4/5/6/7. If you are playing 6 notes with Polychain = 2, note1->ch4, note2->ch5, note3->ch4, note4->ch5, note5->ch4, etc.
Selectable Motif 1 MIDI-out port and channel.
Selectable Motif 2 MIDI-out port and channel.
MIDI out ports are USB 1 thru 4, and 5 pin din MIDI A and MIDI B.

Tags: MIDI sequencers

1 in stock $388.96

Click for better price!

or call +44 20 7424 1960
quote 968112

People also bought...

Arturia MiniFreak 6-Voice Polyphonic Hybrid Keyboard Synthesiser (hybrid keyboard synthesiser)

Arturia

Cat: 906342 Rel: 24 Nov 22 • View all Synthesisers

A 6-voice polyphonic hybrid keyboard that fuses two digital sound engines with analog filters, outside-the-box sequencing, and instant-access modulation in a playful, curious, and sometimes unpredictable way.

Notes: Big brother to the excellent MicroFreak, the MiniFreak is a hugely impressive hybrid synth, teaming dual digital sound engines with analogue filters for creative approaches to polyphonic sound.

Supplier notes:
MiniFreak is a 6-voice polyphonic hybrid keyboard that fuses two digital sound engines with analog filters, outside-the-box sequencing, and instant-access modulation in a playful, curious, and sometimes unpredictable way. MiniFreak encourages users to escape the ordinary and explore the unconventional with a 37-note velocity-sensitive keybed with aftertouch, weave intricate evolving performances with multiple modulation lanes, and discover endless sweet spots with a built-in digital FX engine - a wildly creative experience.

Unprecedented hybrid polyphony

With over 20 modes to choose from including Virtual Analog, FM, and Additive, the interplay between MiniFreak's two oscillators can result in truly unique compound sonic behavior. With 6-voice polyphony, analog filters, and the ability to process engine 1 through engine 2, MiniFreak puts premium polyphonic synthesis exploration into a compact & tactile instrument that's as addictive as it is powerful.

Customizable & experimental sound design

Embellishing the popular Freak modulation matrix, MiniFreak gives users even more control over shaping, transforming, and evolving their sound, with features like polyphonic ADSR envelopes, customizable multi-segment LFO shapes, FM & Ring Modulation, and the familiar Spice & Dice randomization.

Mix-ready stereo sound

MiniFreak comes with stereo outputs and 3 digital FX slots with 10 FX types to choose from. From stereo-enhancing chorus, to surgical 3-band EQ, to gritty 6-mode distortion, users will have everything they need to push their sound over the edge while keeping it mix-ready.

Expression, meet chaos

Despite its penchant for wild & exploratory sound design, MiniFreak is also built as a responsive instrument of expression. Its velocity-sensitive 37-note keybed with aftertouch and spontaneous Seq/Arp functionality makes it a dream to perform with, while its randomization features and modulation lanes put playfulness and sonic momentum immediately at users' fingertips.MiniFreak VMiniFreak comes with a dedicated VST counterpart, letting users totally integrate its unique hybrid sound into their DAW productions and vice versa. Using identical sound engines and architecture, it offers a like-for-like virtual experience of the synth itself, at no extra cost.

What's in the box:

Box content
MiniFreak Unit
Universal PSU - 12V 1A
USB A to USB 2.0
Registration card

Instrument dimensions
Size : 22.75 x 9.09 x 1.57 inches (578 x 231 x 55mm)
Weight : 6.48 lbs. (2.94 Kg)

~~MRP:$622.35~~ SAVE 20%
8 in stock $495.80

People also bought...

ALM Squid Salmple 8-Channel 4-Output Sampler Module (sampling/drum synth module)

ALM Busy Circuits

Cat: 733238 Rel: 18 Jul 19 • View all Synth modules

Eight channel audio & CV sampler module - 21HP

Notes: Eight channels of audio and CV sampling with real-time editing and processing. Does basic sampling well but quickly gets creative and weird.

Supplier's notes:
The 'Squid Salmpler' is a Eurorack 8 channel audio & CV sampler. It is designed for immediate real time sampling, editing and mangling within a modular context.

Taking influence from early hardware samplers, The Squid Salmple focuses on usability and instinctive operation, incorporating a proven Pamela's Workout style user interface for minimal screen dependence and a fun, hands on experience.

With support for sampling and playback for both audio and CV, as well as CV control of all parameters, on-the-fly bank loading and saving to USB, The Squid Salmple brings a unique take on old school sampling into the modular realm.

The Squid Salmple comes with a USB Stick containing approximately 90 banks of original carefully curated royalty free samples. This includes a wide range of sounds from classic drum machines and weird synths to field recordings and CV modulations. Banks are provided by both ALM and some of our favourite artists and friends including Mumdance, Solid Blake, Russell Haswell, Lauren Flax, Dave Burraston (NYZ), Sue Zuki, Dungeon Acid, Sasha Lewis and Andrew Duff.

Tags: Sampling module

2 in stock $414.90

People also bought...

Arturia Keystep Pro Chroma 37-Key USB MIDI Keyboard Controller & Step Sequencer (dark grey) (MIDI keyboard controller/sequencer)

Arturia

Cat: 986578 Rel: 21 Dec 23 • View all MIDI keyboards

A special-edition version of the unparalleled 4-track sequencer & keyboard, embellished with a sleek dark grey finish, great-feeling knob caps and customizable track colours

Notes: Chroma version of Arturia's flagship KeyStep Pro, a brilliantly versatile sequencer and controller keyboard capable of controlling MIDI synths, drum machines and analogue gear via CV.

Supplier's Notes:
KeyStep Pro Chroma

Sequencing mastermind recoloured

KeyStep Pro Chroma is a special-edition version of the unparalleled 4-track sequencer & keyboard, embellished with a sleek dark grey finish, great-feeling knob caps and customizable track colours. The same all-in-one power, with more edge.

The future is sequenced

Rediscover the controller keyboard that changed the sequencing game, upgraded with a futuristic exterior and supercharged with unique creative functionality.

Chroma aesthetic

Retrofit your musical setup with sleek cyberpunk attitude. KeyStep Pro Chroma features a dark grey casing, vivid blue LEDs, and striking knob caps.

Customize your flow

Exclusive to KeyStep Pro Chroma, you can customize the LED colours for each of your tracks - so every project and composition looks as unique as it sounds.

The must-have sequencer

KeyStep Pro remains the benchmark for hardware & software sequencing and creative performance alike. Chroma is no exception: your sequencing mastermind

Abundant connectivity

From Eurorack modules, to analogue synths and VST's, synchronize all your gear and unleash your creativity in style.

Enterdark mode

Fusing utility with aesthetics, creativity with beauty, and sleek design with vivid colour, KeyStep Pro Chroma delivers next-level performance with pure style.

Exterior

A dark grey shell simultaneously gives this controller space station futurism and classic car attitude.

Lights

Icy blue LEDs illuminate Chroma's metal exterior, while customizable track colours inject perfectly-contrasting vibrancy.

Controls

Complementing the cool grey shell and vivid LEDs, Chroma's controls feature premium, great-feeling stylish caps.

Control hardware, software & DAW at the same time

Looking for the best modular sequencer?

How about a MIDI controller for Ableton? Or a live performance keyboard that can sync all of your favourite synths to a DAW click track? KeyStep Pro's extensive list of controls, connections, and creative functions are designed to tick every box - let's take a closer look:

The ultimate multi-function controller

Command complex hardware setups, entire DAW setlists, modular racks, and more - all with a user-friendly workflow that prioritizes creativity.

KeyStep Pro remains unique and unmatched in its balance of performance-oriented playability, massive connectivity, and creative depth.

Main Features

Unique dark grey design with blue LEDs and stylish knob caps

Customizable track colours

37 note slim keys, velocity and aftertouch sensitive
LED above each key for efficient visual feedback

Four track step sequencer
16 step buttons, up to 64 steps per sequence
Up to 16 notes of polyphony per step

Melodic sequencer
Real-Time recording, step recording, step editing
Pitch, velocity, gate length, time shift and probability for each note
Scale quantization with user scales
Polyphonic CV outputs

Drum sequencer

24 part drum sequencer
Polyrhythm

Performance-oriented sequencer
Forward and two random playing modes
Pattern randomization
Quantized or unquantized recording
Looper

Arpeggiator

7 arpeggiator modes, 5 octave range

What's in the box

Box content

KeyStep Pro unit
Registration card
Quick Start
USB cable
Power supply

Dimensions
Size : 23.2 x 8.2 x 1.5 inches (589 x 208 x 38mm)
Weight : 5.9 lbs. (2.7 Kg)

~~MRP:$461.58~~ SAVE 10%
3 in stock $414.90

People also bought...

After Later Audio Bartender Stereo Performance Mixer Module (mixer/dual/stereo/panning/VCA module)

After Later Audio

Cat: 1004400 Rel: 11 Mar 24 • View all Synth modules

4-channel stereo production mixer module - 24HP

Notes: Neatly implemented performance mixer with four stereo channels. CV control of level and pan, two pre- or post-fader stereo send busses, quiet mutes and cueing via a front-panel headphone socket.

Supplier's Notes:
Four channel stereo production mixer

Mixer section

Each channel has the following:

Stereo or mono - Each channel can be treated as a stereo channel or a mono channel with two summed inputs.

CV inputs for both panning and level control

Two send buses - You can route each channel to one of two send buses. Each send bus is stereo. You can choose if you want the send to come before or after the level/panning controls.

Mute - The mute has both latching mute (up) and a momentary mute (down). The mute uses a capacitor to slow the turn off and on of the mute action. So it is mostly click-less, but you may find an occasional pop.

Cue bus - You can route each channel to the cue bus.

Mains Section

Two stereo sends outputs
Two stereo returns - which can also be used to directly insert into the main mix.
Main stereo outputs - level controlled with the slider and stereo VU meter.
Main mono output - summed output of the main L&R. If you are after an 8ch mono mix, you can use each channel in stereo mode, use the level control to control the level and then pan control to control the levels of the two channels.

Cue Section

1/4" Headphone jack along with level control
Fader control to listen to the main mix, cue mix, or an adjustable mix of the two.
Expandable

Bartenders can be cascaded to create 8ch, 12ch, or 16ch mixer. The main level is what is sent the main level control can act as a group control.

Barbacks can be added to add 2ch to your mix. Barbacks can also be cascaded enabling up to a 16ch mixer configuration.

Send-VCA can be added for CV control of the level of the send.

DVCA, Cast Iron, Mingles, and USB-2CH can all be connected with Dupont cables (aka female to female breadboard cables) via pin headers on the back of the modules. Connecting the in and out pins will send/receive the audio into the next module.

Width: 24hp
12V: 260mA
-12V: 225mA

! low stock $355.77

Click for better price!

or call +44 20 7424 1960
quote 1004400

People also bought...

Make Noise 0-Coast Semi-Modular Desktop Synthesiser (semi-modular desktop synthesiser)

Make Noise

Cat: 599686 Rel: 26 Sep 16 • View all Synthesisers

Single voice patchable synthesiser

Notes: A modern classic. Superb little semi-modular monosynth in its own right, but comes alive when paired with other modular gear. A great option for beginners and experienced synth users alike.

Supplier's notes:
The 0-COAST is a single voice patchable synthesizer. Its name reflects the fact that it utilizes techniques from both the Moog and Buchla paradigms (aka "East Coast," and "West Coast," due to their locations), but is loyal to neither and thus implements "no coast synthesis."

While the 0-COAST utilizes classic modular synthesis techniques, it's designed to operate with or without the use of patch cables. The necessary connections have been made from circuit to circuit so it operates as an expressive, musical MonoSynth. Using only the MIDI controller of your choice you could apply new timbres to your existing musical forms!

Using the included Patch Cables you could get more scientific, experimenting with new ways to wire up the circuits. You might even forgo MIDI altogether, disappearing into a cloud of analog FM induced Sidebands and harmonics scattered around a single fundamental drone that has nothing to do with any form of music you've ever known.

9 in stock $475.05

People also bought...

Rode RODECaster Duo Integrated Audio Production Studio (integrated audio production studio)

Rode

Cat: 944724 Rel: 29 Jun 23 • View all Studio mixers

Compact integrated audio production studio for podcasters, streamers and content creators.

Notes: Compact and user-friendly all-in-one production studio from Rode's excellent RodeCaster series. Aimed at podcasters and content creators, the RodeCaster Duo makes it easy to achieve great results.

Supplier's Notes:
The RODECaster Duo is the ultimate compact audio solution for podcasters and content creators. Combining revolutionary features with superior sound quality, endless customisability and unmatched ease of use, the RODECaster Duo is all you will ever need to record incredible audio for your content.

Everything You Need to Sound Spectacular

The RODECaster Duo is the world's most powerful all-in-one audio production solution. Condensing a complete professional broadcast studio into a compact and intuitive console, it gives you everything you need to sound spectacular, whether you're podcasting, streaming or creating any kind of content. Loaded with cutting-edge next-gen features and supercharged by a high-performance quad-core audio engine, this is all you need to produce exceptional content.
Incredible Audio, Incredibly Easy

The RODECaster Duo is incredibly simple to navigate with its large high-definition touchscreen, tactile rotary encoder and broadcast-quality faders giving you hands-on control over every aspect of your sound. Get your project set up in seconds, and with professionally tailored presets and our intuitive VoxLab™ processing editor, you can dial in your perfect sound with the tap of button or twist of a knob. It's never been easier to create amazing content.
Revolutionary Sound

The RODECaster Duo features world-class Revolution Preamps that deliver pristine audio quality with any microphone, instrument, headset or line-level source. Designed from the ground up specifically for the RODECaster series, these ultra-low-noise, high-gain preamps will give you plenty of output while remaining incredibly quiet, eliminating the need for microphone boosters, lifters or external processing

Professional Processing, Powered by APHEX

Craft your sound with studio-quality audio processing powered by one of the most revered names in pro audio: APHEX. On-board is a suite of authentic emulations of legendary hardware audio processors, including the Aural Exciter, Big Bottom and Compellor master compressor/leveller. There is also a studio-quality compressor, noise gate, high-pass filter, de-esser and three-band equaliser for each channel. Sound exceptional every time you hit record.

Super Compact, Highly Portable

The RODECaster Duo is incredibly versatile and powerful, but it's also exceptionally compact and portable. Take your podcast on the road, create content from home or the office or simply liberate some desk space to keep your livestream looking clean.
Customise To Your Creative Flow

No matter what kind of content you're creating, the RODECaster Duo can be configured to perfectly suit your workflow. Assign the eight inputs to any of the physical or virtual faders to suit your setup, customise the effects and processing for each channel, and transform the RODECaster Duo into your own personalised studio.
Take Creative Control with SMART Pads

The RODECaster Duo features six programmable SMART pads that give you huge creative control at your fingertips. Trigger sounds, music beds, or on-the-fly voice effects like reverb, echo, pitch and robot FX, send MIDI commands to external software, activate automated mixer actions like fade-ins and fade-outs, and so much more.

Connect Any Audio Device

No matter what your setup looks like, the RODECaster Duo offers complete flexibility when it comes to connectivity, making it the perfect control centre for your audio productions. It features two USB interfaces for dual computer setups, an MFi-certified USB port that works seamlessly with iOS devices, and you can record ultra-high-quality phone calls or stream audio in high-definition via the advanced Bluetooth connection.

Key Features:

Fully integrated audio production studio for podcasters and content creators
Ultra-low-noise, high-gain Revolution Preamps (-131.5dBV EIN, 76dB gain)
Two high-quality Neutrik combo inputs for connecting microphones, instruments or line-level devices
Seven individually assignable channels with four broadcast-quality physical faders and three virtual faders
Integrated wireless receiver for connecting RODE Series IV wireless devices (including the Wireless GO II and Wireless ME)
High-performance quad-core audio engine
Studio-grade APHEX audio processing and on-board effects
Six fully programmable SMART pads with bank switching
3.5mm TRRS input for connecting headphones and headsets
Dual USB-C interfaces for connecting two computers or mobile devices
Advanced Bluetooth connectivity for high-quality phone call integration
Designed and made in RODE's state-of-the-art facilities in Sydney, Australia

Specifications

Acoustic, Video & Electrical
Frequency Range: Mic Inputs: 20Hz - 20kHz, Monitor Outputs: 20Hz - 20kHz
Microphone Input Impedance: 4KO
Instrument Input Impedance: 1MO
Preamplifier Gain Range: 0 - 76dB
Equivalent Noise: -131.5dBV (A-weighted)
Line Output Maximum Level: 4dBu
Headphone Output Power: 250mW
Power Requirements: USB-C PD (9V, 3A)
Analogue Audio Output Connectivity: 2 x combo jack (mic, instrument, line), 1 x 3.5 TRRS headset jack (I/O)
USB Interface 1: 1 x 2-in/14-out multichannel device, 1 x 2-in/2-out with mix-minus
USB Interface 2: 1 x 2-in/2-out with mix-minus
Bit Depth: 24-bit
Sample Rate: 48kHz
Recording Storage: microSDHC, microSDXC, USB-C removable drive (exFAT - minimum 100MB/s)
Data Transfer: USB 3.0 SD card reader 130MB/s
Network Connectivity: WiFi 802.11g/n/ac 2.4GHz and 5GHz, Ethernet 100/100
Internal Storage (GB): 4GB (SMART pads)
OS Requirements: macOS 10.15 or later, Windows 10 Version 1803 or later, Windows 11

Mehcanical:

Weight (grams): 1131
Dimensions (millimetres): Length: 235, Width: 225, Height: 76

What's in the box:

1 x RODECaster Duo, 1 x USB-C to USB-C cable (1.5m), 1 x power supply

Tags: Audio interface mixers

~~MRP:$517.59~~ SAVE 16%
2 in stock $433.57

People also bought...

Arturia RackBrute 6U Noir 176HP Powered Modular Synthesiser Case (modular synthesiser case)

Arturia

Cat: 909470 Rel: 07 Nov 22 • View all Synth Module Accessories

Armored synth module carrier

Notes: RackBrute 6U

Armoured Eurorack carrier

RackBrute 6U is an all-inclusive Eurorack case ensuring the total security of your modules and maximum practicality in all conditions of use. Its multi-position configuration and included dependable power supply make it the true specialist solution.

Artists may have a bodyguard; modules deserve armour-plating.

RackBrute 6U provides you with 176HP to store and secure your enviable collection of Eurorack modules in an everlasting yet lightweight aluminium chassis flanked by two wood panels. Once you're locked and loaded, your modular setup will look and feel like a monolith, yet more flexible than ever thanks the Link fastening system and the paired handle. When on the move, it will make the transport of your modular equipment a walk in the park. When in position, it will let you organize your command centre the way you want it. Modules don't live on love alone, and RackBrute 6U keeps everything alive with its +12V / -12V / +5V power supply.

When you have to hold your position for hours, it's better to be well set up and to have a clear view of the surroundings. For this reason, we developed the Link system, a convenient and simple-to-use fastening system that allows you to orientate the dedicated handle so that you can give your modular the most tactically advantageous position. Whether prone, crouching, or standing to attention, RackBrute 6U will always be on the lookout, ready for orders.

Troops are nothing if they are not properly fed. No problem, RackBrute 6U is not just a box. It includes a formidable +12V / -12V / +5V power supply ensuring your firepower up to 1600mA. This is coupled with a military-grade power rail with 32 available slots, including advanced noise filtering technology that guarantees optimum conditions.

With RackBrute 6U, even the most headstrong modules fall into line.

Uniting your forces under the same banner
May all modular units meet at the rallying point and be ready for further orders!

The RackBrute 6U fully takes advantage of the Link System, and it's not alone. You'll also find the Arturia Link on the more compact RackBrute 3U, as well as the self-contained MiniBrute 2 and MiniBrute 2S synthesizers. What solution will you go for? Will your field of operations be fully based on Eurorack, or the powerful force of analogue monosynth flagship supported by a fleet of complementary modules?

This technology is the brainchild of our secret research department, but we wanted it to be patent-free so that all our allies could adopt and benefit from it. The modular music battleground is likely to get crowded with an ever-growing variety of Link-enhanced system.

You are not alone on this mission. You have your trustworthy equipment to keep you company.

Equipment checking!

All present and correct, ready for inspection. We trust you'll find everything to your liking.

Go, go, go!

Don't worry, RackBrute 6U will keep mishaps at bay.

The success of your operation depends on your sensitive material arriving in perfect working order. RackBrute 6U is up to the challenge. The handle, the chassis, the threaded nut strips, each of its strategic components is made aluminium or steel. RackBrute will carry your setup no matter the context, not matter the weight, the distance and the destination. The built-in spacers will also make sure that no collisions occur when transporting two RackBrute units or a RackBrute and MiniBrute 2. Maybe you also want to keep your modular away from prying eyes. Then, trust the optional RackBrute Travel Case for more covert missions.

RackBrute 6U is the complete transport solution for when you need to take your show on the road.

What's in the box:

Box content
RackBrute 6U unit
Power cord

Instrument dimensions
Size : 19 x 13.2 x 3.3 inches (484 x 300 x 83mm)
Weight: 8.3 lbs. (3.76 Kg)

Main Features

Eurorack format, 176 HP
Aluminium Chassis
Provided with a 5 HP power module
Up to 1600mA on +12V and 1600mA on -12V (4 separate circuits of 800mA)
Up to 900mA on 5V
Power rail with
Noise filtering
32 standard power slots
20-slot zone with up to 800mA on +12V and -12V
12-slot zone with up to 800mA on +12V and -12V
Link system and smart handle to fasten a MiniBrute 2/2S or another RackBrute unit in various configurations
Built-in Spacers for the highest protection in transport configuration

Tags: Eurorack cases

~~MRP:$347.48~~ SAVE 10%
1 in stock $311.16

People also bought...

1010 Music Nanobox Tangerine Compact Streaming Sampler (audio sampler)

1010 Music

Cat: 976070 Rel: 15 Dec 23 • View all Samplers

Compact streaming sampler

Notes: Part of 1010's excellent Nanobox series, the Tangerine is a tiny powerhouse sampler. A fresh new approach to sampling, from one-shots to loops, all the way through to four-hour recordings.

Supplier's Notes:
Sweet and Tangy Sampling

The nanobox | tangerine delivers powerful sampling in an ultra portable form factor. With this nanobox, you can add recording, sample playback, clip launching, slicing, and musically intelligent looping capabilities to your desktop or travel rig. With an intuitive touch screen interface, nanobox | tangerine makes easy work of selecting, editing, and tweaking your samples. You can stream large samples of up to 4 GB file size straight from the microSD card. Interact with other musical components via MIDI. Load multi-sample banks with over 500 samples for amazing instrument reproduction. Tweak your configurations to get them just right, then save them to multiple presets for future reuse.

Top features

Play up to 24 stereo polyphonic notes when your samples fit in the 64 MB of internal memory or up to 8 larger stereo samples streaming directly from the microSD card

Play multi-sample banks with up to 16 velocity layers and 576 WAV files loaded in one preset

Configure 8 stereo sample pads per preset as single or multi-samples, clips, slicers, or new recordings

Stream long samples from the microSD card with a max sample size of 4 GB, which can be many hours of audio

Trigger samples with the touch screen or MIDI input as one shots or melodic notes

Control how samples start and stop by choosing from one-shot, toggle, gate and piano (New!) launch modes

Tweak playback through a variety of sample parameters, including start position, length, pitch, gain, filter, loop mode, launch quantization, ADSR, Exclusive Grouping, clip synchronization, slice placement and sequencing, and MIDI note and channel mapping

Quickly and easily use MIDI mapped controls for more tactile access to common parameters

Record up to 16 sequence layers per preset.

Get into the groove with a fast, fluid, and intuitive workflow

Make music anywhere thanks to a compact and nearly indestructible design

Recording Capabilities

Configure each pad for stereo or mono recording with the option to synchronize the start and stop times to clock inputs
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Resample the master output without patching
Automate recording of a multi-sample bank via MIDI
Store recorded samples as WAV files on the micro SD card then remove the card to transfer them to your computer

What is Included:
nanobox | tangerine - Compact Streaming Sampler
MicroSD card with 85 presets and over 1500 wav files
Colour matched USB power cord
Type B TRS MIDI To MIDI 5 Pin DIN adapter
Quick Start Guide

Technical Specs:

Power: USB-C connection 5V, 500mA
3.5mm audio input and output
Maximum input and output level: 2Vrms
DAC and ADC resolution: 24-bit
Internal resolution: 32-bit
Sample rate: 48kHz
MIDI Input: 3.5mm Type A/B auto sensing
MIDI Output: 3.5mm Type B
Clock Input: 1,2, 4, 8, 12 or 24 PPQ selectable
MIDI support: Note On/Off, Velocity, Pressure, Mod Wheel, Aftertouch, CC mappings to common parameters, program changes and clock
H x W x D: 1.5" x 3.75" x 3"
Weight: 0.25 lbs.
2" touch screen, 2 knobs and 4 buttons in a 3.75" x 3" x 1.5" package

Additional information

Weight: 0.65 lbs
Dimensions: 7.75 × 4.85 × 2.25 in

Tags: Sampler

3 in stock $400.37

Click for better price!

or call +44 20 7424 1960
quote 976070

People also bought...

1010 Music Nanobox Lemondrop 4-Voice Polyphonic Granular Mini Synthesiser (mini digital granular synthesiser)

1010 Music

Cat: 860117 Rel: 31 Jan 22 • View all Synthesisers

4-voice polyphonic granular synthesiser with intuitive touchscreen control.

Notes: One of 1010music's first miniature Nanobox instruments, the Lemondrop is a granular synth in a compact format. Touchscreen interface gives full hands-on control of the four-voice sound engine.

Supplier's Notes:
Freshly Squeezed Granular Synthesis

Explore a freshly squeezed approach to granular synthesis with Nanobox | Lemondrop, a polyphonic granular mini synthesizer with intuitive touchscreen control. Four voice polyphony, two granulators and an oscillator provide a wide sonic paletteifrom lush environmental pads to rugged and glitched-out textures. Instantly morph and shape sounds with the swipe of a finger using touchscreen X/Y control. Choose from hundreds of professionally designed presets and wav files, or quickly create your own patches with deep parameter control via the 2" touchscreen. Integrate lemondrop seamlessly with your existing tabletop gearior create on-the-go thanks to a compact design that fits in the palm of your hand.

What Is Included

Nanobox | Lemondrop compact polyphonic granular synthesizer with touchscreen control
MicroSD card with presets and wav files
USB power cord
Type B TRS MIDI To MIDI 5 Pin DIN adapter
Quick Start Guide

Technical Specs

Includes 153 presets and 311 wave files
16 grains per oscillator for a total of 128
Sample memory per oscillator 30 seconds
Power: USB-C connection 5V, 500mA
3.5mm audio input and output
Maximum input and output level: 2Vrms
DAC and ADC resolution: 24-bit
Internal resolution: 32-bit
Sample rate: 48kHz
MIDI Input: 3.5mm Type A/B auto sensing
MIDI Output: 3.5mm Type A/B selectable
Clock Input: 4 PPQ
MIDI support: Note On/Off, Mod Wheel, Sustain, Pitch Bend, Mono & poly Aftertouch, assignable CCs, and clock
H x W x D: 1.5" x 3.75" x 3"
Weight: 0.25 lbs.

2 in stock $398.29

Click for better price!

or call +44 20 7424 1960
quote 860117

People also bought...

ALM 6U 84HP Powered Modular Synthesiser Enclosure Case (modular synthesiser enclosure case)

ALM Busy Circuits

Cat: 875241 Rel: 26 Apr 22 • View all Synth Module Accessories

The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.

Notes: ALM Eurorack cases are available in a range of sizes all including an integrated powered bus boards.

The cases all feature anodised aluminium construction, an on/off switch, rubber feet, and high quality switched powered bus boards with numerous keyed headers and ample power capacity.

These are simple and compact Eurorack cases, perfect for small, focused systems, taking along on travels, or as a tabletop addition to a larger setup.

Cases are available in 4 sizes; 3U 84HP / 6U 84HP / 3U 52HP / 6U 52HP sizes. They all offer 1 Amp on both the -12V and +12V rails per row.

Great modern cases

The ALM powered Eurorack case was originally designed for the System Coupe. Wider interest has seen it evolve into a range of different sized cases being made available by themselves.

A fixed solid bus board provides quality ample power and plentiful keyed power connectors. The shielded DC/DC power converter is low noise and includes overload and short circuit protection. Fixed, quality mounting rails are used over sometimes frustrating sliding nuts. The case has a great looking all anodised aluminium construction that is both strong and light.

The case proportions are designed to look great on a table or desk (not too deep, just enough) and also be easy to fit in a bag and transport.

Decksaver case covers are available currently for the 3U/84HP, 6U/52HP, and 6U/84HP cases.

6U / 84HP

Provides up to 2 Amp power total on each -12V & +12V rails (1 Amp total per row)
Connections for up to 32 modules.
Includes 5 Amp power 'brick'

Tags: Eurorack cases

3 in stock $408.67

Click for better price!

or call +44 20 7424 1960
quote 875241

People also bought...

Squarp Instruments Rample Wave System 4-Voice Sample Player & Audio Processor Module (sampling/drum synth module)

Squarp Instruments

Cat: 783294 Rel: 09 Sep 20 • View all Synth modules

Sample player & audio processor module

Notes: Nicely thought out four-voice sample playback module from Parisian innovators Squarp. Load up a microSD card with samples (up to 2600 kits), then trigger and process. Neat.

** Firmware update- February 2024 ***

Thanks to a major rework of the OS, this upgrade includes an overall better sound quality and an improved latency.

Moreover, the effects Freeze and Bitcrusher have been redesigned, and the parameters Start and Sample Length are now exponential to facilitate the fine-editing of your samples.

Supplier's Notes:

Rample waves system

Eurorack 4-voice sample player & audio processor

Versatile sample machine

From percussive drum-machine kits to synth samples, breakbeats to sound FX, backing tracks to hour-long audio music, Rample can play up to 4 .wav files on independent audio outputs :

These samples are stored inside the provided SD card, and organized as kits, from A00 to Z99... allowing up to 2600 banks of 4 voices, with on-the-fly loading! The SD card is preloaded with tons of samples, and we made it very easy to import your own kits.

Thanks to the DC coupled audio outputs, it's also possible to play CV waveforms.

Effects rack

Each voice has its own "rack" of effects, and all audio effects can be enabled at the same time, allowing you to manipulate your samples in real time, from a gentle lowpass to massive destruction!

pitch - a great sounding pitch engine, based on a 6-pole interpolator, which ranges from -1 octave to +1 octave.

bits - two different bitcrushing algorithms, based on sample rate and resolution reduction. It produces distortion and warms the audio signal.

filter - a low resonance filter, DJ-style, cutting off the high frequencies or the low frequencies.

freeze - sample and loop a fraction of the played waveform, creating a glitching effect.

levels - decrease the gain or drive the signal.

It's also possible to edit 'advanced parameters' like the start point, sample length, attack/decay and run mode, and create mute groups without breaking a sweat.

Finally, thanks to the 4 CV inputs, any of the effects (or advanced parameters) can be assigned to create amazing modulations!

Multi-layer sampling

One of the key feature is the ability to "multi-sample" your kits, multiplying Rample's potential. Each voice supports up to 12 samples, can be played randomly or in a controlled fashion. It's a great way to add complexity and variations, to create organic/acoustic sounding drums, or simply to increase the number of samples per kit (up to 48).

As an example, Squarp are providing a multi-layered drum kit, with 12 different recordings of a kick, 12 different recordings of a snare, etc. Sequencing them randomly leads to a more natural drum playing.

Another kind of multi-layered acoustic drum kit is also provided, where each drum is recorded with 12 levels of velocity. Controlling the layer to be played leads to intricate, convoluted drums programming.

Of course, it's very easy to create your own multi-layered kit, and you can use this method to perform multiple synth chords, sound glitches, voices, breakbeats, ...

CV/Gate and Midi interface

Rample is designed to be the perfect rhythmic companion of your eurorack system thanks to its Gate (trig samples) and CV (modulate samples) connectivity.

You can also use it as a standalone midi machine, without using the CV/Gate connectivity: the midi in port allows you to trig & control all samples parameters + effects values at the same time. Each Rample comes with a 'stereo jack to midi DIN' and 'stereo jack to jack' adapters, easing the chaining of multiple modules in order to create an 8-voice, 12-voice, 16-voice (or more) midi drum machine!

SD card preloaded with 200+ kits from artists and sound designers, covering a large range of audio samples

Tags: Sampling module | MIDI interface module

2 in stock $329.83

Click for better price!

or call +44 20 7424 1960
quote 783294

People also bought...

Mordax DATA Multifunction Tool Signal Analyser & Generator Module (black) (clock generator/clock modulator/dual & stereo/LFO/oscillator/quad/tuner/utility eurorack module)

Mordax Modular Synthesis Systems

Cat: 783338 Rel: 26 Feb 21 • View all Synth modules

Utility module

Notes: Highly sought-after utility tool that always sells out quickly. Full colour display gives visualisation as an oscilloscope, spectral analyser, spectograph, tuner and more. Waveform and clock generator options too.

Supplier's Notes:
The Ultimate Eurorack Utility Module (and a whole lot more!)

The DATA is a digital platform for testing, measurement, and signal generation in Eurorack modular synthesis systems. It is a modular tool kit, with functions applicable to any system and style.

Use the DATA's scope to view the interactions between your control voltages and audio signals, allowing you to master your modules by understanding their voltage ranges, control shapes, and parameter responses. Use the DATA's dual waveform generator to dial in a precisely scaled LFO for CV control, or use the waveform's frequency "note mode" to effortlessly make dyads (two note chords). Use the DATA's clock program as a master clock or to divide or multiply an incoming clock signal, sending four different clock outs to gate modules directly or as control to sequencers.

The possibilities of the DATA are basically unlimited; with the included microSD you can update the DATA's firmware and we can continue to refine and create new programs.

1 in stock $387.92

Click for better price!

or call +44 20 7424 1960
quote 783338

People also bought...

Tiptop Audio Mantis 2x104HP Modular Synthesiser Enclosure Case (orange, UK power supply) (modular synthesiser enclosure case)

Tiptop Audio

Cat: 622920 Rel: 16 Dec 20 • View all Synth Module Accessories

2x104HP modular synthesiser enclosure case

Notes: With Mantis, Tiptop took their years of experience with Eurorack to create a low-cost case that makes the Eurorack modular synthesizer look, work, and feel like a professional instrument. Mantis is an instrument that is at home on stage, touring, or in the center of the studio.

Mantis has two rows of 104HP for you to rack your modules. It comes fully powered and assembled, just drop in your modules and play.

Using its sophisticated leg mechanism, you can set it to three different positions: 0, 45, and 90 degrees.

Power Power and more Power! With Mantis, say bye-bye to the tedious, never-ending calculation of current consumption for the i12V power. Mantis comes with a juicy Zeus power supply that delivers plenty of power both now and for the future.

Mantis is beautiful and the color contrast between legs and body gives it its identity. Legs are offered in 4 different colors so anyone can find the right look.

Mantis comes with real Z-Rails made according to Eurorack enclosure standards. No sliding nuts or wrong spacing! It also has keyed power connectors to help protect your modules from damage from plugging the power in in reverse.

Using the optional bracket accessory Mantis can be doubled up to 416HP! Multiply your Mantis and watch your studio setup grow...

Weighing only 3kg/6.5lb, Mantis is so light, traveling has never been so relaxed.

The Dual Mantis Studio Brackets pair lets you connect two Mantis together in a robust and elegant solution. This setup is fixed and is recommend mainly for studio use. The brackets are cut precisely by laser from a sturdy metal and then coated twice for a nice smooth finish that matches the Mantis light gray color. They come with sixteen screws and special washers that help hold the screw in place during assembly and keep a tiny gap between the brackets and the Mantis. Installation is fairly simple and takes about 30 minutes to complete.

***UPDATE - MAY 2021 ***
As of May 2021, all Mantis cases shipped have a small update to the design. The connector for SyncBus is no longer included. This connector was never used as Tiptop didn't develop the cable for it, and the connector is no longer in production by the manufacturer so it was removed. The Mantis still has the same power supply and functions as before.

1 in stock $307.02

Click for better price!

or call +44 20 7424 1960
quote 622920

People also bought...

Dreadbox Typhon Monophonic Analogue Desktop Synthesiser (analogue desktop synthesiser)

Dreadbox

Cat: 809378 Rel: 20 Jan 21 • View all Synthesisers

Monophonic analogue synthesiser

Notes: Typhon has been developed with ultimate care and love, so as to be a great-sounding, portable and affordable synthesizer. It has a complex modulation routing, 256 preset memory, a 32 note sequencer, and powerful stereo effects developed by Sinevibes.

Since it is packed in a compact USB powered box, it can be carried everywhere you go!

Specifications & Connections:

USB powered (at least 500mA)
60 Playing hours with 20,000mA portable power bank
MIDI Din IN and OUT
1/4 in Stereo Out
1/8 in Headphone Out
1/8 in Mono Audio In (for routing via Typhon FX)

Dimensions: 23 x 13 x 6 cm
Weight: 1kg

~~MRP:$388.97~~ SAVE 15%
1 in stock $329.83

People also bought...

PWM Malevolent 32-Key Analogue Semi-Modular Keyboard Synthesiser (analogue semi-modular keyboard synthesiser)

PWM

Cat: 871121 Rel: 19 Jul 22 • View all Synthesisers

A semi-modular analogue synthesizer, that boasts 19 x 3.5mm inputs and outputs for deep sound exploration and integration capabilities with other modular systems.

Notes: Cracking value in this brutalist beauty manufactured by Bristol's Future Sound Systems. Interesting features like wave-shaping VCOs and Sallen-Key filter make it the ideal starting point for a bigger modular setup.

Supplier's Notes:
Malevolent has been designed by Paul Whittington in collaboration with Bristol based synth manufacturer Future Sound Systems who have provided the analogue circuitry, and Ben Supper who developed the control interface:

Paul has a had a long career in developing products for some of the biggest names in the industry and is now using his expertise to build instruments, bringing in talents from friends he's made during his tenure in development.

Future Sound Systems are a renowned Bristol based synthesizer manufacturer, who are responsible for some of most forward-thinking designs on the market, they specialize in modular and semi-modular synthesizers & their design prowess is very apparent in Malevolent.

Despite its diminutive size, Malevolent sounds big, aggressive and is capable of everything from soaring leads, huge bass sounds, percussive phrases, weird sound FX and more.

It's form factor, user interface and price point make it a great option for those taking their first step in the modular domain, but it's unique sound, extensive modulation capabilities and the options for integrating seamlessly with other synthesizers, makes it a great option for experienced user who's looking for something a little different.

Modular Pure Analogue Synthesiser

Pure Analogue signal path designed by Future Sound Systems
Pure VCOs

19 Outputs and 19 Inputs for 3.5mm mono jack cable patching
Normalised signal path for immediate sound Malevolence
Additional rear panel line out
Additional headphone out

2 Voltage Controlled Oscillators
Saw / Triangle / Pulse outputs plus Mix for each oscillator
1V/Oct pitch control input
Shape control / pulse width modulation input
2x Frequency Modulation inputs
Coarse / Fine tune control
Shape mod amount control
FM1 and 2 mod amount controls
Shape control
Selectable waveforms for the mix output
Individual osc level control

LFO (Low Frequency Oscillator)
Triangle / Square wave outputs
Rate control

2x Envelopes
Individual ADSR controls for each envelope
Individual gate inputs
Individual envelope outputs

Multi-mode 2 pole VCF (Voltage Controlled Filter)
Low pass / Band pass / High Pass individual inputs
2x Frequency Modulation inputs with amount controls
Filter cutoff
Filter resonance

Mixer
Noise w/level control
Aux input w/level control

VCA (Voltage Controlled Amplifier) with overdrive control
Compatible with Eurorack standard 1V/Oct gear
Monophonic and patchable allowing individual pitch control of each VCO and gate control of each envelope
USB bus-powered
MIDI In / Out
Headphone out
Line out
Analogue clock in & out

USB-MIDI to 1V/Oct CV & gate conversion
All pitch and gate control is fully analogue
Analogue clock In / Out

Multi-function Joystick control
Left / right for pitch bend
Performable portamento
Performable vibrato
This is in addition to the analogue LFO
Latching hold mode

Arpeggiator
6 arpeggiator types
Up, Down, Up/Down 1, Up/Down 2, Played & Random
Auto clock sync
Detects analogue / MIDI or USB-MIDI clock and synchronises the arpeggiator automatically
Selectable sync rates when clock detected
Rate / sync control
Latch
6 Octave range
Analogue / MIDI / USB-MIDI Clock output when arpeggiator is running

Keyboard Control
32 Velocity-sensitive mini-keys
Octave shift +/- 4 octaves
Pitch output
Velocity output
Gate output
Local Off mode for DAW use

Includes:
5 Patch cables

Power Supply (9V 600mA)
USB C lead

Getting Started Guide

Weights and Dimensions:

Product (unboxed):
490 x 250 x 80 mm
2.61 kg

Product (boxed with contents):
690 x 320 x 160 mm
3.70 kg

~~MRP:$517.59~~ SAVE 22%
3 in stock $404.81

People also bought...

Yamaha SeqTrak Music Production Studio (black) (music production studio)

Yamaha

Cat: 993791 Rel: 18 Jan 24 • View all Drum machines

Music production studio including drums, synth & sampler, sound design & effects

Notes: Yamaha's all-in-one portable production tool offers an exciting new take on music making. Synth and sampler engines combine with a built-in sequencer, allowing you to create tracks from scratch.

Supplier's Notes:
Unlock your creativity anywhere

Introducing SEQTRAK, the ultimate music creation station that empowers you to capture, create and connect with fans - from anywhere you happen to be.

Capture

Capture ideas as quickly as they come.

All-in-one system

Drums. Synths. Sound design. Sequencing. All included. With an array of features, all loaded in a compact, lightweight design, SEQTRAK allows you to start producing right away - no matter where you are. It's got everything you need. And more.

Lightning-fast workflow

SEQTRAK makes capturing ideas simple with a clear 3-part user interface and real-time, hands-on controls. You'll produce your music without menu-diving or waiting for boot times. Seize moments of inspiration and unleash your creativity in no time at all.

Extensive sounds

SEQTRAK extensive library contains over 2,000 presets. You'll find a vast collection of professionally crafted sounds - from rich pianos, to shimmering synths and thundering drums. More will be available with updates to the SEQTRAK app.

Onboard sampling

Capture your own unique sound samples effortlessly. SEQTRAK's sampler offers seven sound slots and a variety of effects, allowing you to shape and transform your samples with ease. Say a phrase, tap a spoon, or record your favourite pet - then customize to create polished Tracks - all in high-quality 44.1 kHz/16-bit format.

Make music on the go

With its compact size, lightweight design, built-in speaker and microphone, as well as a rechargeable battery, you can take SEQTRAK anywhere - from the studio, to the stage, to the sofa. No need to worry about power outlets or tangled cables. Create, perform, and share your music - anytime, anywhere.

Create

Turn your ideas into original music.

Sound engines + effects

Double your creative potential with two versatile sound engines. AWM2 (Advanced Wave Memory 2) boasts an impressive 128-note polyphony and specializes in authentic sounds like pianos, strings, and guitars, while the four-operator FM engine produces stunning synth pads, leads, FM electric pianos, and more. Additionally, SEQTRAK includes powerful effects for a polished sound.

Sequencer

SEQTRAK's advanced Sequencer allows for intuitive and seamless composition, arrangement, and playback of musical Tracks. With its user-friendly interface, you can easily navigate and control various parameters, such as tempo, swing, and track settings.

Sound editing

Inside the included SEQTRAK app you'll find an intuitive graphic user interface that lets you quickly dive into each Track and shape your sounds with precision. Editing includes a comprehensive set of functions, including envelopes, filters, and effect manipulation, enabling you to refine your compositions with meticulous detail.

Connect

Share your music. Connect with your fans.

Performance

Take centre stage with the SEQTRAK's powerful performance features. Create arrangements on-the-fly by combining Tracks and Patterns, remixing beats, and muting/unmuting Tracks in real-time. Add polish and sparkle to your music using global effects - then control these sounds live while you perform.

Visualizer

The SEQTRAK app has a Visualizer mode that transforms your music into a captivating visual experience. With this free performance and production feature, you'll bring your music to life with stunning visuals that sync perfectly with your songs. Customize and tweak Patterns, motion effects and more, however you see fit. There's even an Augmented Reality (AR) mode that allows you to integrate 3D virtual objects into real-world live videos.

Connectivity

- Bluetooth MIDI: Connect wirelessly to the SEQTRAK App & Visualizer, enhancing convenience and mobility.

- Wi-Fi: Transfer WAV samples wirelessly, eliminating the need for cables.

- MIDI In/Out: Connect to other hardware synths, MIDI controllers, or a computer; expanding your sound options and enabling integration with external devices.

- USB-C: Establish a single cable connection for MIDI and stereo audio to a computer simplifying setup and streamlining workflow.

- AUX In: Connect to drum machines, synths, and other external sources, expanding and diversifying your sound.

*Wireless functions may not be available depending on your area. Check with your Yamaha dealer. Windows PC cannot use wireless functions.

Specs
Tone Generator: AWM2, FM: 4 operators
Maximum Polyphony: AWM2: 128, FM: 8
Wave: Preset: 800 MB (when converted to 16-bit linear format), User: 500 MB
Effects: Reverb × 12 types, Delay × 9 types, Master Effect × 85 types, Single Effect × 85 types, Master EQ 5 bands, LP-HP filters for each track

Tracks

Track Types: DRUM, SYNTH, DX, SAMPLER
Number of Tracks: 11

Sounds

Number of Sounds: Preset Sound: 2032 Preset Sampler Sound: 392 *Can be added from the SEQTRAK app
Connectivity

USB: USB Type-C (power, MIDI to host, MIDI to device, audio)
Headphones: [PHONES] (stereo mini jack)
A/D INPUT: [AUDIO IN] (stereo mini jack)
MIDI: [MIDI] IN/OUT *Only included cable can be used.

Functions
USB audio interface: [Sampling Frequency = 44.1 kHz (quantization bit depth: 24-bit)] Input: 2 channels (stereo 1 channel), Output: 2 channels (stereo 1 channel)
Bluetooth: MIDI transmission/reception (wireless capability varies by country)
Wi-Fi: Data transmission/reception with dedicated app (wireless capability varies by country) The highest SAR value: 1.11 W/kg

Sound System

Speakers: 2.3 cm, 1 W
Microphone: Internal MEMS microphone

Power Supply

Power Source: Rechargeable lithium-ion battery (2,100 mAh, 7.6 Wh) USB Power Delivery (PD) (Output voltage: 4.8 V to 5.2 V, Output current: 1.5 A or greater)
Power Consumption: 6 W
Battery life for continuous use: 3-4 hours
Battery charge time: 3-5 hours

Size/Weight

Dimensions

Width: 343 mm (13-1/2")
Height: 38 mm (1-1/2")
Depth: 97 mm (3-13/16")
Weight: 0.5 kg (1 lb 2 oz)

Packing Box

Width: 420 mm (16-9/16")
Height: 90 mm (3-9/16")
Depth: 165 mm (6-1/2")

Included accessories: USB-C to USB-C cable, dedicated MIDI Converter Cable, Quick Operation Guide, Safety Guide
Dedicated Software: SEQTRAK app
Sequencer Block - Maximum Steps: 128

~~MRP:$386.89~~ SAVE 12%
1 in stock $341.26

Click for better price!

or call +44 20 7424 1960
quote 993791

People also bought...

4ms Catalyst Controller 8-Channel Macro Controller Module (controller/function generator/sequencer module)

4ms Company

Cat: 995953 Rel: 11 Mar 24 • View all Synth modules

8-channel macro controller module - 20HP

Notes: Really smart integration of macro controls for Eurorack, based on the original design by Emblematic Systems. Assign settings to eight CV outputs then morph with the crossfader or record movements to manage presets or set up complex real-time modulation. Can also operate as Catalyst Sequencer.

Supplier's Notes:
The Catalyst Controller is a macro controller with eight precision CV outputs and a responsive crossfader to morph between scenes. A scene is a snapshot of up to eight CV outputs, like a modular preset. Traverse a "pathway" composed of multiple scenes using the crossfader or an external CV signal, or immediately jump using the scene buttons. Record CV and slider movements, and play recordings back via a button or external trigger.

Each output has sub-millivolt precision and a maximum range of -5V to +10V. Channels have an adjustable morphing curve, can be quantized to common scales, restricted to a particular voltage range, or set to output gates.

Whether used as a CV preset manager, seamless transition generator, chord sequencer, CV recorder, or experimental CV playground, the Catalyst Controller puts control of your modular at your fingertips.

The Catalyst Controller can also turn into a Catalyst Sequencer! Hold down a special button combination to change between controller and sequencer modes. If you end up liking the Sequencer more, you can even remove the double-sided faceplate, flip it over, and re-install with the Sequencer artwork visible.

Based on the original Catalyst module from Emblematic Systems.

Specifications:

Smooth, responsive crossfade morphs between scenes
Eight output channels, each can be CV or Gate
Arrange scenes into pathways of up to 64 scenes
Smooth, responsive crossfader morphs from scene to scene along the pathway
Set slew/lag to limit how fast scenes can change
Adjustable Morph time per output
Control crossfading with an external CV
Record and playback up to 20 seconds of CV and crossfader motion
CV outputs can be set to -5V to +10V maximum, or limited to +/-5V, +5V, +3V, or +1V
CV outputs can be unquantized (sub-1mV resolution), or Quantized to common scales
Randomization of channel values/gates
Copy/paste
Based on the original Catalyst from Emblematic Systems

Pairs with: 4ms Catalyst Sequencer

! low stock $350.58

Click for better price!

or call +44 20 7424 1960
quote 995953

People also bought...

Vermona Melodicer Stochastic Pattern Generator Module (sequencer/quantizer/random synth module)

Vermona

Cat: 677524 Rel: 04 May 20 • View all Synth modules

Sequencer module

Notes: Excellent Eurorack sequencer based on random chance and evolving patterns. Dial in a series of notes and build melodies, generate and tweak patterns in real time. Huge depth for studio production or live performance.

Supplier's Notes:
The Melodicer from Vermona is a CV/Gate sequencer with an innovative concept; the melody sequencer offers twelve faders for setting the note probability and two dice-(or random) buttons for generating melody and rhythmic structure.

Tags: Sequencer module

3 in stock $443.93

Click for better price!

or call +44 20 7424 1960
quote 677524

People also bought...

Koma Elektronik Field Kit FX Desktop Modular Multi-Effects Processor (silver) (effects unit)

Koma Elektronik

Cat: 689031 Rel: 19 Jun 18 • View all Effects units

Electroacoustic workstation - boxed version

Notes: This new device is a powerful new CV controlled effects unit for your electronic music setup and pairs extremely well with the KOMA Field Kit.

- Looper
- Frequency Shifter
- Sample Rate Reducer/Bitcrusher
- Digital Delay
- Analogue Spring Reverb
- 4 Channel VCA Mixer
- 4 Step Mini Sequencer
- Envelope Generator

All of this, combined with the new 4 Channel CV Interface which allows you to route four CV signals throughout the device, means an incredible control over sound and timbre and a great addition to your mobile performance rig.

The Field Kit FX is built up from 7 separate functional blocks all focused on mangling and changing incoming audio and CV signals. They are designed to operate together as a coherent addition to our Field Kit Electroacoustic Workstation or alternatively together with other pieces of music electronics with the ability to use control voltage signals.

Tags: Effects module

More than 10 in stock $310.14

People also bought...

Waldorf Blofeld Virtual Analogue Wavetable & FM Synthesiser (black) (virtual analogue keyboard synthesiser)

Waldorf

Cat: 467331 Rel: 05 Sep 12 • View all Synthesisers

Synthesiser + Waldorf Edition software, including D Pole Filter Module, PPG Wave 2.V & Attack

Notes: *** Synthesizer comes with a free copy of The Waldorf Edition software, including D Pole Filter Module, PPG Wave 2.V & Attack ***

Waldorf are back in the game. With the Blofeld. this synthesizer offers all the unique qualities that made Waldorf a truly legendary brand.

The engine inside the heavy duty, full metal chassis of the Blofeld delivers the same fat and rich sound that so many Waldorf users worldwide love when they play their Pulse, Q, Q+, Micro Q, Microwave, Microwave II/XT, or even the flagship Wave.

Yes, you've heard it right. The Blofeld is not only capable of producing these warm, organic analog sounds known from the Q synthesizer line, it also sports a wavetable engine like its predecessors with Wave in their names.

This unique synthesis system is based upon the revolutionary PPG Wave synthesizers of the early 80s. So when you listen to the Blofeld for the first time, you will instantly recognize those edgy, hard-hitting and bell-like timbres that have been an integral part of so many world hits from the PPG era on, and become increasingly popular once more.

In fact it is amazing to realize that nowadays this complex technology fits into such a slim and elegant device. And for a price no-one would have imagined a couple of years ago.

~~MRP:$513.44~~ SAVE 11%
1 in stock $457.49

People also bought...

Conductive Labs MRCC MIDI Router Control Centre (MIDI router)

Conductive Labs

Cat: 857264 Rel: 24 Jan 22 • View all MIDI converters & accessories

Reinventing the classic MIDI router

Notes: Serious control power with this unique MIDI router. A total of 11 MIDI inputs and 17 outputs plus two thru ports allows you to connect a wealth of MIDI gear, filter, map, merge and route with huge flexibility.

Supplier's Notes:
Following on from the NDLR, an innovative Multi-part Polyphonic Arpeggiator, Conductive Labs have set out to reinvent the MIDI Router. Why? Because there's nothing like it!

It's super deluxe: featuring one button routing for each physical input and output, RGB LEDs, and OLED graphical display, everything can be easily setup without a PC. Unlike devices with front and rear facing connectors, MRCC's vertical ports are designed to have the smallest footprint, saving your desk space for more synths!

Massive MIDI I/O: 11 inputs and 17 outputs, including 5 PIN DINs, 3.5MM MIDI jacks in both flavours, 4 USB host ports, and a USB client (PC, Mac or tablet) connection with 12 MIDI ports. With automatic merging, MIDI master clock with CV clock out, filtering and MIDI effects, and MIDI message monitoring.

Expand and extend your outputs up to 50' away with the MRCC Remote 7. Need even more? Connect 2 MRCC's together with a single cable for remote routing up to 32' (10m) apart. MRCC is Rack mountable too, with the available 2U Rack Ears.

User Centered Design
All MIDI cables plug vertically into the top panel which frees up valuable table space. The top panel graphics connect each button-jack pair so you know exactly which device you are routing or filtering.

Routing MIDI paths and configuring MIDI filters is easy with the full colour LEDs and the one button per input / one button per output front panel layout.

Modern Connectivity
11 inputs and 17 outputs, including 5 PIN DINs, 3.5MM MIDI jacks (in both type A and type B flavours), 4 USB host ports (with 4 virtual USB MIDI input ports each), and a USB client (PC) connection with 12 virtual USB MIDI ports. Everything you could want for connecting MIDI gear in your studio.

Advanced Functionality
For more advanced tasks use the graphical interface on the sharp colour OLED display. Using the tabs and folders style UI with the cursor buttons and encoder makes navigation simple. Once the MRCC is configured, save it to memory for recall later. All this with no confusing PC app.

Expandable
The optional MRCC Remote provides a convenient, clean solution for getting MIDI outputs to a remote location, such as into a 19" rack or to your keyboard stand. The Remote is connected to MRCC with a single shielded Ethernet cable, eliminating a bundle of long MIDI cables.
If you need even more ports, connect two MRCCs together!

Accessories
Expand the MRCC with the MRCC Remote 7. It adds 5x routable 5 pin DIN connectors, with 2 shared 3.5MM TRS (in both A and B flavours). It comes with a 10 meter (32') Ethernet cable to get MIDI outputs to where you need them, without a bunch of long MIDI cables.

Rack mount the MRCC with 2U Rack Ears. These strong, powder coated steel rack ears mount the MRCC in a standard 19-inch rack.

*Accessories sold separately.

THE HARDWARE
Requirements:

International AC/DC power supply included
Input: 100~240V AC
Output: 5.25V DC, 3A USB-PD type C connector
USB Host ports only for USB MIDI class compliant devices, or USB PC keyboard for entering labels
MIDI input devices and sound modules that meet MIDI standards, including MPE (MIDI Polyphonic Expression) devices are supported
Personal Computer (running Windows, OSX or Linux) for firmware updates.
Physical Layout:

Dims: 15.5" x 3.5" x 1.9"
28 routing buttons, plus remote routing button and stand-by button
Colour OLED Screen
Encoder and navigation buttons
Power switch
Recessed firmware update button
Physical Input/Output:

5x MIDI 5-Pin DIN Inputs
2 jack selectable 3.5MM TRS MIDI (type A and B) input (shared with 1x 5 pin DIN), choose 1 of the 3
2 jack selectable 3.5MM TRS MIDI input (MIDI type A and B) choose 1 of the 2
All MIDI Inputs are optically isolated, and traditional 5V MIDI spec Outputs
4x USB 2.0 USB MIDI Host ports (4 virtual ports per In and 1 per Out)
1x USB Device port for connecting to a PC or tablet. With 12 individually routable USB MIDI virtual I/O ports (16 channels per port = 192 channels in and out).
10x MIDI 5-Pin DIN Outputs
4x 3.5MM TRS (2x type A and 2x type B, thru) can be used simultaneously
1x Clock Out 3.5MM jack (use a mono (TS) cable)
1x RJ45 for optional MRCC Remote 7 or MRCC to MRCC connection (not Ethernet)
Limited Warranty:

MRCC comes with a limited warranty to the original owner for 1 year (or the minimum time required by law in your country) from the time you received it.

The MicroSD card and accessories have a 90 day limited warranty.

8 in stock $493.72

Click for better price!

or call +44 20 7424 1960
quote 857264

People also bought...

Erica Synths/Sonic Potions LXR Drum 7-Voice Percussion Synthesiser Module (drum module)

Erica Synths

Cat: 877382 Rel: 03 Oct 22 • View all Synth modules

7-voice percussion synthesiser module - 28HP

Notes: Based on the excellent LXR-02 drum machine, the LXR Eurorack module is a percussion all-round, with six voices, trigger inputs and CV modulation, plus the ability to generate synth parts. Versatile.

Supplier's Notes:
LXR eurorack module is a compact and great-sounding percussion synthesizer based on the sound engine of the LXR-02 drum machine. While retaining the core interface of the LXR-02, this module adds the essential eurorack ingredient - assignable CV control over parameters and many more tweaks in the user interface for better integration in any eurorack system

Features

6 drum/percussion voices
7 trigger inputs with accents
5 assignable CV inputs
4 assignable outputs
3 voices can be used as basslines due to 1V/oct tuning
Over 30 adjustable parameters per voice
Insert FX section
Kit memory
SD card for Kit exchange and easy firmware updates
Kits compatible with the LXR-02

Dimensions
28 HP
35 mm deep

Current Draw
88 mA +12V
10 mA -12V
0 mA 5V

Tags: Sequencer module | Drum module

1 in stock $443.93

Click for better price!

or call +44 20 7424 1960
quote 877382

People also bought...

Erica Synths/Sonic Potions LXR-02 Digital Drum Synthesiser & Sequencer (digital drum machine)

Erica Synths

Cat: 835701 Rel: 30 Jul 21 • View all Drum machines

Digital drum machine with an integrated sequencer

Notes: Not just a drum machine but a drum synth, the LXR-02 combines the best analogue and digital sound design options to great effect. Six drum voices each with over 30 adjustable parameters.

Supplier's Notes:
Two companies - Sonic Potions and Erica Synths joined efforts to develop a drum machine that would stand apart from the masses and the LXR-02 was born. The LXR is a full-fledged digital drum machine with an integrated sequencer. Its sound engine provides 6 different instruments, each with over 30 parameters to tweak, producing sounds from classic analog emulations to crunchy digital mayhem, thus offering some of the most extensive sound design capabilities found on a drum synthesizer. Its compact, durable design and clear user interface make it ideal for live gigs.

Features
6 drum voices
Powerful sound design engine
Over 30 adjustable parameters per voice
Voice volume sliders
Insert FX section
4 assignable 6,3" jack outputs (2x stereo or 4x mono)
Full-size MIDI in/out
Flexible, performance-oriented 64 step sequencer
Performance mode with mutes, rolls, master bitcrush, and kit morphing
Kit, Pattern, Performance, and Song memory
SD card for easy FW updates and Project backup
USB MIDI
Headphone output
Extensive MIDI implementation
Durable and compact aluminum casing

2 in stock $495.80

Click for better price!

or call +44 20 7424 1960
quote 835701

People also bought...

iConnectivity mioXL 8x12 USB MIDI Interface (8x12 USB MIDI interface)

iConnectivity

Cat: 825888 Rel: 08 Nov 21 • View all Audio interfaces

Advanced 8 in/12-out MIDI-USB-RTP/network interface for Mac, PC, iOS

Notes: mioXL- The MIDI interface redefined

mioXL is iConnectivity's flagship MIDI power-house, packed full with the very best technology and innovations. With mioXL it's never been easier to get huge amounts of MIDI gear connected and talking to each other. Harness the power of iConnectivity's advanced computer and network connectivity and experience why mioXL redefines what a flagship MIDI interface can and should do.

Connect all your MIDI devices (USB-MIDI, DIN-MIDI, RTP/Network-MIDI) and Mac, PC, and iOS computing devices to each other, and let this rugged, versatile interface put you in control of your MIDI devices and workflow.

On stage or in the studio, RTP/Network-MIDI capability means you are no longer constrained by cable length or limited USB ports. Stack multiple interfaces and computers on a network for ultimate scalability and flexibility.

With mioXL you're able to streamline and expand your MIDI setup, no matter how massive and demanding. Even though it's iConnectivity's most powerful MIDI interface, mioXL is still accessible to all users, allowing you to do whatever you want with MIDI faster, better, and in creative and exciting new ways.

What makes mioXL unique? The iConnectivity difference.

Next-gen Ethernet RTP MIDI adds massive capability and flexiibily

iConnectivity's next generation RTP/Network- MIDI capabilities, and what they'll do for you.

Ethernet connectivity means MIDI is on the network wherever you need it. Regular USB connectivity limits you to keeping your interface within 15ft of your computer. Ethernet connectivity gives you up to 330ft / 100m connection between you and your interface. Drop an interface in every room of your studio, or place an interface virtually anywhere in a venue.

RTP/Network-MIDI is not bound by some of the same restrictions as USB-MIDI.

Easy renaming of network ports - have them show up the way you want them to in your DAW.

Access to more than 22 ports per interface.

iConnectivity's unique network technology is as easy to use as USB! Enjoy your new-found MIDI power without extra headaches.

Use your 22 network MIDI ports anyway you want. Connect each of the 22 RTP-MIDI sessions to any combination of physical or virtual I/O ports. Almost any combination is possible.

Configuring mioXL:
Introducing a new version of iConnectivity's Auracle control software: taking the simplicity of workflow that the original Auracle introduced but now with the added deep configuration functionality that iConnectivity are known for. All the deep configuration options you asked for: MIDI merging, filtering, remapping, and deep routing are all there and super easy to use.

mioXL's display, rotary encoder and capacitive touch controls make navigating presets and monitoring MIDI traffic easy

Presets onboard:

Need to configure your MIDI setup in multiple ways? No problem!

New to mioXL : store and recall up to 32 presets directly on the interface, without even needing a computer!

Easily store and recall unique MIDI routing, filter and merging setups to preset scenes, and recall them all directly via the mioXL front panel.

mioXL's OLED display and encoder wheel gives you a crisp clear way of monitoring MIDI traffic, viewing, and selecting presets.

mioXL makes you the master of your MIDI domain. The MIDI interface: reinvented.

What's in the box:

1x mioXL
1x USB Cable.
1x Ethernet cable
1x mioXL 12V 36W Power Supply with interchangeable blades (NA, EU, UK and AU (Australia only)).

Device Specifications:

Width: 482.6 mm/19 in
Height (1U): 44.45 mm/1.75 in.

System Requirements

Macintosh
Mac OS X 10.11 or greater
1 free ethernet or USB port

Windows
Windows 10 or greater
1 free ethernet or USB port

iOS
iOS 8 or greater with Camera Connection Kit (CCK)*
CoreMIDI compatible app

1 in stock $344.36

Search dance music

Filter

My search

Saved Searches

Help & Information

Departments

My Juno

100% Secure Shopping

DJ Mag Best Of British

Cart subtotal:

Items per page:
Show tracks:
Hide played by

Search dance music

Filter

My search

Saved Searches

Stock

Coming Soon

Type

Equipment

Format

Release Date

Brand

Featured

Price

Tags

Help & Information

Departments

My Juno

100% Secure Shopping

DJ Mag Best Of British

This website uses cookies

Cart subtotal: