Search dance music

Notes: Space Bender

Chorus Modulator

LFO in the UFO

The Space Bender chorus modulator replicates and warps your signal into beautiful and organic transmissions from a dimension somewhere beyond linear time.

Under the hood lies an array of dynamically modulated delay lines allowing you to craft subtle vintage sci-fi sounds, bending sonic bedlam, and pulsing atmospheres. Never again will you say this chorus pedal just isn't intense enough! These in combination with the rocker switch settings let you move smoothly through a wide range of effect types allowing for new ways of thinking and experimenting with modulated delay, chorus, and flanger.

Stretch and pull your sound waves to craft glassy bell resonances, massive reverse dive bombs, and seasick demon drones with a simple (but deep) interface. The spectrum of living, breathing sound manipulations stowed within the Space Bender serves as an interstellar gateway for the next wave of musicians to create a universe of haunting and unexplored soundscapes.

See you on the other side!

Specifications

Dimensions: 5" x 2.63" x 2.45" (including hardware)
Weight: 9.3 oz.
Power: 9V DC (runs on standard 2.1mm negative center 9V DC adapter).
Current Draw: 65 mA.

Notes: The uniK 08+ is the result of extensive development work performed in Germany, to provide a professional active reference monitor that defines a new level of quality in its class. With its new 8" kevlar low frequency driver and a new custom engineered and powerful high frequency magnetostatic tweeter, the uniK 08+ offers many improvements over our successful uniK 08 and provides unique sound characteristics that allow this monitor to satisfy the highest demands in a professional studio environment.

What makes uniK 08+ unique?

The uniK 08+ studio monitor offers true full range quality with extended low end in a small case and an entirely new signal processing and amplifier unit with a perfect order low-z and low noise design. Mos-Fet Bi-amplification ensures a high slew-rate and fast setting, featuring true analog vintage sound processing with LC-like gyrator technology for a stressless and silky sound.

A completely new feature is the unique one knob sound character adjustment from smooth to bright, allowing you to change parameters for every room and preference. The additional high resolution High and Low switches add additional control. And of course the uniK 08+ studio monitor features a real precision gain attenuator, instead of a simple volume control.

The new design of the crossover ensures an excellent phase response and safe power limitation, to drive the woofer and tweeter efficiently. The tweeter features a newly upgraded magnetostatic design with extremely low moving mass for extended frequency and fast transient response and high sound resolution. The matching woofer consists of a kevlar composite cone with high stiffness ensuring better piston motion and excellent low-end sound reproduction.

Another new feature is the flexible rubber feet with discrete height adjustment. They are not only helpful to reduce unwanted vibrations, but also allow you to tilt the speaker towards the precise listening point - a great feature for typical near field applications.

Other new special features that are not standard in this class are standby to save power consumption (can be disabled) and a ground lift switch.

And with it's copper color woofer cone and high quality matte cabinet finish, it looks quite uniK, too!

ROOM ADJUSTMENTS

SIDE - TILT UP

SIDE - TILT DOWN


Features
Biamp 2-Way Powered Speaker System
Active Studio Monitor Speaker
HF Driver: extremely low mass magnetostactic tweeter F49 x 26 mm
LF Driver: 8" kevlar curved cone (magnetic shielding type)
Output Power: 140W (HF: 70W, LF: 70W), 160W AC consumption power
Frequency Response: 37Hz - 25kHz
Input Impedance: 27.2kOhm (balanced) / 13.6kOhm (unbalanced)
Crossover Point: 3.2kHz
SPL: 105dB, Peak 108dB
Input Connectors: XLR / TRS 1/4" combo connector, balanced / unbalanced
Gain Control: -14 .. 0dB .. +14
Room Adjustments Control: Character: -6 .. 0dB .. +6; Low: -5 .. 0dB .. +5; High: -5 .. 0dB .. +5
Rear Bass-Reflex ventilation, optimized for near field application
Ground lift switch
Standby function: can be turned on and off
Indicator: multi color LED on front panel, power on orange, standby red
Feet: 4 pieces rubberized, adjustable height separately
Working Voltage: AC100-240V 50/60Hz
Dimensions (W x H x D): 252 x 352 x 319mm
Weight: 8.1 kg

Notes: The J44 models are JICO CUSTOM SHOP brand alternate replacements for the iconic SHURE M44 cartridges. JICO has two products available on the market: the J44A 7 and the J44D. The J44A 7 is designed to be a replacement for the SHURE M447, while the J44D is designed to be a replacement for the SHURE M44G. The JICO J44 models are made to be as close to the actual SHURE M44 cartridges in terms of output performance.

The J44A 7 and the J44D are the same exact cartridge, just as the original SHURE M447 and M44G cartridges. The difference in the sound reproduction is created by the stylus that is used with the cartridge, which produces the distinct sound that is reproduced in conjunction with the J44 cartridges from JICO.

The N-44-7 stylus that is included with the J44A 7 offers a brighter sound than the N-44G stylus that is included with the J44D, with a thicker bass sound-the same difference as with the SHURE 44 cartridges. JICO has followed the structure of the SHURE products to release the alternative replacement. Not only the sound output is as close to the SHURE M44 cartridge models, but the tracking ability of the J44 performs as the same with sticking to a record groove with high jump/skip resistance and low record wear.

The JICO J44A 7 with N44-7 stylus provides a crisp and clear sound in the higher frequencies, with the bass being heavy, bold and pronounced. This gives a lively, vigorous and dynamic sound experience. The J44A 7 produces powerful bass frequencies with a smooth, balanced sound, similar to the specification of the genuine Shure M44-7 cartridge.

Cartridge: J44A 7
Cartridge: Type Moving Magnet
Stylus: N44-7 DJ IMP Nude
Stylus: Type Nude Conical (Spherical)
Tip Size: 0.7 mil
Cantilever: JICO S-Type Aluminium
Weight: 5.6 g
Height: 16 mm
Output Voltage: 8 mV
Frequency Range: 20Hz-20kHz
Recommended Load: 47 kO
Direct Current Resistance: 800 O
Compliance: L8.5 / V7.8
Stereo Channel Balance: 1.5 or below
Channel Separation (at 1kHz): 20 db
Tone Arm Mount: 1/2 inch standard mount
Tracking Force: 3.5-4.5 g
Glow in the Dark: True
Use: DJ (scratching)

Notes: 2000-watt 8-inch 2-way powered loudspeaker with Bluetooth, DSP & app control

TrueSonic TS4 from Alto Professional

Louder. Clearer. Smarter.

Where TS3 exceeded expectations, TS4 redefines them completely. Building on the legacy of our best-selling TrueSonic speakers, the TS4 Series delivers increased power, clearer sound, and advanced Bluetooth functions including streaming, speaker linking, and App control.Compact, lightweight, and designed for reliability, the new TS4 Series makes it simple to get great live sound at every event.
True Sonic Power

Whether you need a powerful vocal PA or club-shaking bass performance for a DJ set, TS4 speakers deliver loud, clear, room-filling sound for any application.

With an 8-inch woofer, and a 1.4-inch compression driver, TS408 delivers 2000W of class-leading power and clarity in equal measure.

Free Alto App for remote configuration and control

Available free for both Android and iOS, the Alto App gives hands-on remote control over Bluetooth levels, Speaker Use Modes, Custom EQ and Sub Size selection. Further, True Wireless Stereo linking can be configured remotely via the app to save time during setup.
Built-In 3-channel mixer

Every TS4 features an integrated 3-channel mixer, with two Mic/Line input channels and a dedicated Bluetooth channel. The Mic/Line channels feature XLR/TRS combo jacks and can be used with microphones, instruments, and line-level signals without the need for additional hardware or adjustment. Just plug straight into the rear panel and you're up and running.

Simple Bluetooth Streaming & Speaker Linking

The ideal high-powered streaming solution, TS4's built-in Bluetooth connectivity makes it easy to pair your laptop, phone or tablet and get the music pumping in no time at all.

With the True Wireless Stereo function you can stream Bluetooth audio to two TS4 speakers in perfect stereo without the need for any cables.

DSP Modes for the best sound in every application

TS4's three preset "Speaker Use" modes let you optimize the speaker for any application, so you'll get great sound every time at the touch of a button. For even more control over your sound, you can configure a Custom EQ within the Alto App and remote adjust the settings from any listening point in the venue. You can even save your favourite Custom EQ setting direct to the TS4 for easy recall whenever you need it.

Versatile and Reliable

From the high-quality drivers to the fanless class D amplifiers, every aspect of the TS4 Series has been designed for superb reliability, whether used for mobile gigs and performances or fixed installation.

Each speaker features a lightweight, sleek, black box design that can be used as the application demands - freestanding, as a wedge monitor, pole-mounted or suspended via the integrated suspension points.

Applications

Solo performers
Musicians and Bands
Mobile DJs
Gymnasiums, fitness centers, and dance studios
Houses of worship
Theatres
Bars, restaurants, clubs
Special events, presentations, and weddings

Technical Specifications

Output Power: 2000W
Low-Frequency Driver: 8.0" driver, 2.0" (50 mm) high-temperature voice coil. 1 x 650 W RMS @ 2 O.
High Frequency Driver: 1.0" exit ceramic driver with 1.4" (35 mm) coil. 1 x 350W @ 4 ?.
Crossover Frequency: 2 kHz
Maximum SPL: 130 dB (peak), 127 dB (continuous) (dB-SPL @ 1 m)
Frequency Response: 62 Hz - 20 kHz (+/-3 dB)
Frequency Range: 52 Hz - 20 kHz (-10 dB)
Horn Coverage: 90- horizontal x 60- vertical (nominal)
Connectors: (2) XLR+1/4" (6.35 mm) TRS combo inputs (Balanced), (1) XLR output (Link), (1) IEC power cable input
Line Gain/Volume Control Range: -? to 0 dB, +4 dBu nominal, +10 dBu for max output
Mic/Inst. Gain / Volume Control Range: -? to +50 dB
USB Charging Port: 5V 2.1A
Controls: Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
Indicators: (1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped),(1) Bluetooth LED (Blue), (1) Link LED (Orange), (4) DSP Presets LED (Green), (3) HPF LED (Green)
Power Connection: IEC
Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz
Consumption: 900W
Fuse: 100-120V T10AL AC250V; 220-240V T5AL AC250V
Protection: Electronic clip, thermal, and transducer overdrive protection
Enclosure: Injected Moulded Enclosure and Perforated Metal Grille
Mounting/Installation: Standard 36 mm pole socket, flown application, suspended with integral M6 points, or in a wedge monitor position
Operating Temperature: 10-C to 45-C (14-F to 113-F)
Dimensions (height x width x depth): 17.2" x .10.1" x 9.6 / 436 x 256 x 245 mm
Weight: 20.7 lbs. / 9.4 kg

Review: There are various eye watering stats about the many, many million copies of this album that have been pressed and sold. For each one sold there is almost as many different versions of it, too, if you look on Discogs. But all the hype and huff aside, there is a reason it is one of jazz's most famous records. The sultry modal moods, the masterfully melancholic trumpet sounds Davis conjures and the noir, late night vibe are all perfectly realised and universally understood. Without it, music at large, let alone jazz, would sound very different.

Notes: This is an exact hardware replica of the Mutable Instruments Marbles.

Notes: Great value from this compact, portable multi-track recorder. Record instruments or vocals anywhere. Pre-loaded drum loops and built-in synth instruments help you get started.

Supplier's Notes:
The R12 Multitrak - Live to make music.

The R12 is made for musicians who live to make music. And they want the freedom to make music wherever they go.

All you need on-board

Compact and mobile, you can record and mix songs without a computer. Use the R12's full-colour LCD touchscreen to cut, copy, loop, and edit your tracks.

Amazing sound

The R12 has super-clean preamps and you'll love the way they sound. With two XLR/TRS inputs, and 8 tracks of audio, the R12 is perfect for recording everything from demos to release-ready songs.

Fully loaded

The R12 includes a send effects channel offering reverb, chorus and delay with a ddedicated effects return fader. For advanced tones, you can use presets and effects from Zoom's Guitar Lab.

Take it everywhere

The R12 provides up to 5 hours on four AA batteries allowing you to bring your production anywhere. Additionally, you can use the R12 with the included AD-17 power adapter, or a USB battery.

The R12 also has pan and a 3-channel EQ for each track and a compressor on inputs 1 and 2.

Playback. Play along.

Use Sequence Play to create a playlist of your projects. Then use them as backing tracks, whether you're playing live or rehearsing a set.

It starts with a groove

With 150 preloaded drum loops in a variety of patterns and genres, the R12 provides a versatile rhythm section for any project.

Import audio files

Add additional audio samples by importing files into your R12 via Micro SD card or USB thumb drive.

From headphones to monitors

The R12 includes an 1/8" stereo headphone jack as well as dedicated 14" monitor outputs.

Interface + control surface

Use the R12 as a stereo audio interface with your favorite DAW or streaming platform, via USB-C. As a control surface, the transport controls and faders make it easy to adjust and control your software during production.

Attention to detail

Connections

Connect microphones, instruments or line level devices like keyboards, mixers and more.

Hi-Z

Input 1 on the R12 has a Hi-Z switch, allowing you to plug your guitar directly into the recorder.

Phantom Power

Both inputs on the R12 offer 48V Phantom Power for condenser microphones.

Stay in time. Every time.

Activate the fully customizable click track with the press of a button. Click balance blends the metronome with your playback audio and routes it to your headphones and/or the main outputs.

Add some synth

The R12 has 18 FM synth instruments built in. They can be played by plugging in a MIDI keyboard via USB-C or programmed using the touchscreen.

What's in the box:
R12 MultiTrak
AD-17 AC Adapter
USB Cable

Specs

INPUTS / OUTPUTS
INPUTS - MIC/LINE (mono): 2
OUTPUTS - MASTER OUT: 1
PHONES: 1

INPUTS
MIC/LINE (MONO) Connectors: 2 XLR/TRS combo jacks (Balanced, XLR: 2 HOT / TRS: TIP HOT)
Input gain: +6 ~ +50 dB
Input impedance: XLR: 3.9 kO TRS: 3.9 kO/1 MO (when Hi-Z ON, INPUT 1 only)
Phantom power: +48 V (switchable separately for INPUTS 1 and 2)
Equivalent input noise: -121 dBu or less (IHF-A) at +50 dB/150 O input
Frequency response: -1.0/+0.5 dB: 20 Hz - 20 kHz

OUTPUTS
MASTER OUT - Connectors: 2 TRS phone jacks (balanced)
Maximum output level: +14 dBu
Output impedance: 200 O
PHONES Connectors: 1 stereo 3.5mm mini jack
Maximum output level: 45 mW + 45 mW (into 32 O load)
Output impedance: 10 O

RECORDER
Maximum simultaneous recording tracks: 2
Maximum simultaneous playback tracks: 8
Recording format: 44.1kHz, 16/24-bit, mono/stereo WAV
Recording media: Cards compatible with microSDHC specifications 4 GB - 32 GB

TRACK SETTINGS
EQ
High: 10 kHz, 12 dB, shelving
Middle: 2.5 kHz, 12 dB, peaking
Low: 100 Hz, 2 dB, shelving
Pan: L100 - R100

EFFECTS
Input Dynamics: Comp/Limiter/Gate
Patch memory effects: 3 types can be used simultaneously
50 patch memories
Guitar Lab supported
Can be assigned and used as an insert (input) or send effect
Dedicated send effects: 10 types of spatial effects

TUNER: Chromatic/Guitar/Bass/Open A/Open D/Open E/Open G/DADGAD

CLICK (METRONOME)
Time signatures: 3/4, 4/4, 6/8
Tempo range: 40.0 - 250.0 BPM

POWER
Batteries: 4 AA (alkaline, lithium, or rechargeable NiMH)
AC adapter: ZOOM AD-17 (5V/1.0A)

RHYTHM LOOPS
Sound source format: PCM
Number of loops: 150

SYNTH
Sound source format: FM
Polyphony: 8
Number of sound types: 18 (and a PCM drum kit)

DISPLAY: 2.4" (320×240) full-color touchscreen LCD

USB
CONNECTOR: USB Type-C
Note: Use a USB cable that supports data transfer. USB bus power is supported.

AUDIO INTERFACE FUNCTION:
2-in/2-out or 2-in/2-out (iPad): USB 2.0 Full Speed - 44.1 kHz, 16/24-bit
2-in/4-out: USB 2.0 High Speed - 44.1 kHz, 16/24-bit

MASS STORAGE FUNCTION
Device: USB 2.0 High Speed (5 V/200 mA power supplied when host)
GUITAR LAB CONNECTION: USB 1.1 Full Speed
DAW CONNECTION (CONTROL SURFACE): USB 1.1 Full Speed

MASS STORAGE FUNCTION
Host: USB 2.0 High Speed (5V/200 mA power supplied)

USB MIDI KEYBOARD CONNECTION: USB 1.1 Full Speed (5 V/200 mA power supplied)

ESTIMATED CONTINUOUS OPERATION TIME USING BATTERIES
During playback with +48V off and 32O headphone load
Alkaline batteries: about 5 hours
NiMH batteries (1900 mAh): about 5 hours
Lithium batteries: about 11 hours
* The above values are approximate. Continuous battery operation times were determined using in-house testing methods. They will vary greatly according to use conditions.

POWER CONSUMPTION: 5 W maximum
DIMENSIONS: 256 mm (W) × 158 mm (D) × 61 mm (H)
WEIGHT (including batteries): 827 g
NOTE: 0 DBU = 0.775 VRMS

Notes: *** B-STOCK: Box opened, but product is in excellent condition and in perfect working order ***


Field recorder meets interface in this clever offering from IK's iRig range. Essentially a 4-in/2-out audio and MIDI interface with built-in mics, the Quattro is portable, versatile and high quality.

Supplier's Notes:
Pro recording and performing, in the palm of your hand

iRig Pro Quattro I/O is a professional-quality 4 in / 2 out portable audio and MIDI interface packed with everything needed for field recording and content creation, for serious sound and flexibility - anywhere.

Small enough to fit in the palm of your hand, the iRig Pro Quattro I/O still packs in four high-quality, low-noise mic preamps; instrument, RCA and TRS inputs; plus XLR balanced, 3.5mm stereo and headphone outputs - and full MIDI I/O!

iRig Pro Quattro I/O works right out of the box with iPhone, iPad, Android, Mac and PC, but can also serve as a stand-alone mic preamp or line mixer, with a built-in limiter and direct monitoring so you're always guaranteed the perfect take.

Packed with a swiss-army-knife's worth of tools, iRig Pro Quattro I/O ensures you're ready for anything, anywhere.

As a mobile interface

Connected to a computer or mobile device, the iRig Pro Quattro I/O will work as a high-quality, multi-channel audio and MIDI interface with a full array of inputs and outputs so you'll always be prepared for any recording or need. Fully MFi-certified, no adaptors are required for iPhone or iPad for reliable field performance on any device.

As a broadcast / podcast interface

Enable STEREO mode and iRig Pro Quattro I/O mixes all sources down to stereo for streaming or recording. Monitoring is easy thanks to a dedicated headphone output with independent volume control and direct monitoring. Or use MONO mode for streaming to social media; Loopback lets you duet your favourite videos easily.

As a field recording interface

With an onboard microphone and optional stereo mic capsules, iRig Pro Quattro I/O turns your iPhone, iPad, Android device into a full-featured, professional field recorder.

As a stand-alone mixer

iRig Pro Quattro I/O also works as a preamp and mixer: just power it via battery, USB or DC IN and use the full set of inputs/outputs to capture and mix multiple sources to your DSLR camera with professional quality.

Always perfect recordings with the safety backup channels

In STEREO and MONO mode, inputs 3 and 4 can be used as safety channels: recording the same signal as input 1 and 2 but reduced by 12dB as a backup in case the sound source unexpectedly overloads the main channels.

Audio quality without compromise... wherever you are

Up to 24-bit, 96 kHz sample rate Ultra-low-noise mic preamps with full +48v phantom power Professional-quality, transparent A/D and D/A conversion Built-in limiter, for input 1-2, to protect against clipping Multitrack, stereo or mono internal mixdown.

Specifications

Microphone Input
Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
Microphone Input Level: from 6 mVpp to 1.4 Vpp
Microphone Input Impedance: 3.2 kOhms
Gain Range: 40 dB
Phantom Power: +48V i 4V
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS

Instrument Input
Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
Instrument Input Level: from 30 mVpp to 6.9 Vpp
Instrument Input Impedance: 1 MOhms
Gain Range: 27 dB
Frequency Response: 20 Hz - 20 kHz +/-1.5dB
Input Noise: -103 dB(A), -97 dB RMS
Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Control numbered thumbwheel
Headphone Level Power 100mW into 50 Ohms

Stereo Headphone Output
Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output
Connector: 2x2.5mm TS Jack
Other Input/Output
DC barrel: 1x DC barrel. For power and device charging.
Device Connector: mini-DIN

Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz

Power:
- USB bus powered when used with a computer
- Battery powered (2xAA included) when used with an iOS device
- DC power supply (not included, iRig PSU 3A sold separately)*

Package includes
iRig Pro I/O universal Audio-MIDI interface
Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
USB-A to Mini-DIN connection cable (60cm/23.62")
USB-C to Mini-DIN connection cable (60cm/23.62")
2.5mm TRS male to MIDI female adapter (10cm / 3.9")
2 x 1.5V AA Battery
Velcro strip

Dimensions
Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
Weight: 120g/4.23oz (batteries excluded)

Notes: Updated version of Omnitronic's affordable alternative to Pioneer CDJs. The XMT-1400 is a versatile media player, capable of playing from CD, USB and SD card.

Supplier's Notes:
DJ player for CD, USB and SD

Audio CD, CD-R, CD-RW, MP3 CD
USB port for storage media and portable players
SD(HC) card slot
Anti-shock RAM buffer memory
Text display supports CD text and ID3 tags (artist and title name)
Touch-sensitive scratch jog dial with mode selector: pitch bend, scratch, fast or frame search
Reverse run
Brake effect (as with analog turntables)
Comfortable track selection via 10-digit numerical track input
Folder navigation
Search buttons for fast forward and reverse
Pitch adjustment +/-4 %, +/-8 %, +/-12 %, +/-16 %
Pitch bend via jog dial or separate buttons
Manual beatcounter
Instant start and cue function with preview
Double loop/reloop function
Single or continuous play
Repeat functions
Title programming
Extra-large play/pause and cue buttons with color illumination
LCD display for easy controlling
Desktop console housing

Technical specifications

Power supply: 100-240 V AC, 50/60 Hz
Power consumption: 12 W
Power connection: Mains input via C8 "figure 8" mounting version power supply cord with Euro plug (provided)
Frequency range: 20 - 20000 Hz
S/N ratio: >86 dB
THD: <0,01 % at 1 kHz
Audio player: USB + SD + CD player Anti-shock Seamless loop; pitch
CD player drive: Slot in-Single CD drive
Display type: LCD display
Display: CD-DA play time remaining , play time elapsed , total play time remaining , Bargraph; MP3 ID3-Tags , play time remaining , play time elapsed , Bargraph
Connections: Output: line via 1 x stereo RCA 2 V
Format: CD, CD-R, CD-RW, CD-DA, MP3
Frame accuracy: 1/75 s
Available storage media: USB devices/SD cards max. 128GB
Pitch range: +/-4%, +/-8%, +/-12%, +/-16%
Housing design: Desktop console housing

Dimensions: Width: 23 cm
Depth: 31 cm
Height: 12 cm
Weight: 2,30 kg

Notes: ADDAC711 is a dual channel Isolated DI box and is all about keeping the sound coming into your Modular free from any undesired noisy interferences, making sure that what you're getting from your inputs is what your external hardware is actually producing. It provides galvanic electrical isolation between the Modular system and external sources preventing impedance mismatch and ground loop induced hum. ADDAC's 711 circuit is designed around a unity 1:1 type Low-cost Audio Transformer operating in the 20 Hz to 20 KHz range, this impedance matching transformer provides two fully balanced outputs (via XLR connectors).

There are two independent channels on the module with:
Audio Output
Signal overload warning led
LIFT/FLOAT/GND toggle switch
Gain control
XLR Input

The LIFT/FLOAT/GND 3-way switch lets you choose between lift, ground or floating ground. In the LIFT position (left) the module circuit will be "lifted" to ground through a 100R resistor and a 10nF capacitor. In the FLOAT position (middle) Ground will not be shared leaving ins and outs grounds completely apart from each other fully isolating both signals.
In the GND position Ground will be shared between inputs and outputs, here no isolation is used. Any of these three positions may be the best form of avoiding ground loops or any other undesired interference occurring between your modular and the external hardware. Try out which one of these options will work best in any given situation.

The importance of using Audio Transformers

Applying a transformer balanced input isolation has lots of advantages over other less expensive ways for dealing with ground loop issues. This method provides the chance to set a very simple and cleancircuit in which the signal transfer process develops smoothly and humming free. The transformer is a device that performs both signal balancing and high-to-low (or vice-versa) impedance conversion, while rejecting straggled DC voltage and Radio Frequency Interference from signal passing through a magnetic bridge. In a transformer, two (or more) coils (called windings) of insulated wire wound around a magnetic metal core allow for its input(s) and output(s) not to be physically connected together. When an AC signal passes through the input winding (the primary), a perfectly related AC signal appears on the output winding (the secondary). This way, by the fact that signal flows via inductive coupling between the two windings of the transformer, this module presents a most accurate electrical isolation between its input and output. A same number of windings on each coil guarantees that there's no gain loss when audio signal passes from the primary to the secondary windings. Furthermore, since these two windings are insulated from each other, the transformer will electrically isolate ADDAC711 from any other device, preventing hum problems coming from an outsider ground. Being a low-cost transformer the frequency response curve is not completely linear, still the -0.2dB
attenuation at 50Hz feels negligible.

Notes: Like the Iguana that's malleable to its environment, blending into its surroundings for harmonious balance or standing out with vibrant confidence, the Polychrome Flanger is a uniquely colourful tool for adding modulated textures to songs.

The Polychrome Flanger is a true bypass, all analogue Flanger pulling in familiar layout controls from the Julia and Lillian.
Dial in a wealth of colourful flange with the D-F-V blend knob and the shape and voice switches.
The Shape Switch lets you select from sine, triangle, or random LFO wave to modulate the delay line

The Voice Switch lets you select between two voices for the flanging effect.
In the down position, the flanger is more traditional and full frequency.
In the up position, you get a more complex and notched flange effect with less low end.

Like the other members of the Walrus Audio modulation family, the Polychrome has a blend knob. The D-F-V (Dry, Flange, Vibrato) knob lets you blend the dry and delayed signal from full dry at minimum (no effect), to traditional flange at noon to full pitch vibrato at maximum. Don't sleep on the vibrato sounds in the Polychrome.
Set the D-F-V knob to maximum, feedback to a minimum, and the voice switch up for some unique pitch vibrato.

Top mounted input, output, and power jacks as well as soft switch relay bypassing make the Polychrome fit well on your board and ensure smooth operation for years to come.

Specs
The Polychrome comes in a flat black enclosure with purple, yellow, coral, green and white ink, featuring original artwork by David Huttner.
Power supply not included.

Dimensions and power consumption:
0.25kg
6,6 x 12,2 x 5,6 cm (W x D x H)
50 mA

In the box:

Walrus Audio Polychrome
Manual
Sticker
Guitar pick
Pouch

Notes: Wave Expander bridges the gap between the Melody Miracle and Touch Tones synthesizers, and the rest of the synthesizer world. Control other synths by sending CV and gate signals via Wave Expander, and dial in the right amount of control with onboard CV tuners. Outputs are visually indicated with the Chrominancer color window at the center of Wave Expander, bringing cosmic insight to the signals at hand.

Melody Oracle and Touch Tones expander module
Use AMP synthesizers to control external gear
12 outputs (6 CV/6 Gate)
CV Range: 0V to +12V
Chrominancer color window

Notes: Unique touch-activated instrument with built-in speaker, allowing you to trigger notes with one hand and modulate the timbre via touch pads. Unorthodox tones, unorthodox interface. Lots of fun.

Supplier's Notes:
Touch Tones is a touch activated auto harmonic synthesizer, with a 3 octave tuning range, XOR logic modulator, Harmonicon auto harmony generator, and two onboard bandpass filters. The left side of the Touch Tones holds three capacitive touch pads for playing notes, while the right side contains a set of 7 touch pads to modulate the different parameters sequencing the synthesizer.

Three octave range plus XOR modulator.
Harmonicon automatic harmony keys play a perfect 5th of each tuned ROOT note.
Dual Luma filters for active timbral shaping via light control.
Wear the Touch Tones for Function or Fashion with the included chain lanyard.

Notes: Hue is an audio colour processing effect, in 6HP eurorack format. Hue is comprised of a chain of 5 effects (Drive, Filter, Tape Saturation, LoFi, Compressor). Each effect imparts a particular coloration, tone, distortion, and/or texture to the source audio. With Hue, Drums bang with more intensity & melodies morph into lush LoFi tones.

Hue's goal is to simply colour your sound. The initial concept was born of a debate about the techniques and processes used to make drum machines sound big, bold, and delicious. The sounds that tug at the hearts of boombap, LoFi, and subsequently modbap, enthusiasts are those that have great texture, lush degradation, soft distortion, and big bold strokes of colour. The classic beloved drum machines were often processed with outboard gear, recorded to tape, pressed to vinyl, played in big booming systems, sampled, and resampled and on and on. Ultimately, those are the sounds that become nostalgic and reminiscent of all that we love about classic LoFi boombap production. Hue is Modbap's attempt at bringing that vibe into eurorack with a cute little 6hp package.

The effects chain audio signal path is as follows; Drive, Filter, Tape Saturation, LoFi, Compressor. The panel layout allows for the DJ style filter knob to sit in first position for ease of tweaking. Drive boosts and lightly distorts the signal, while shift+Drive adjusts the Drive tone. The Filter is a low pass filter to the left and a high pass filter to the right. Tape effect is intended to impart cassette tape saturation, while shift+Tape adjusts the intensity. LoFi adjusts bit depth, while shift+LoFi adjusts sample rate. Lastly, the one knob compressor mini pot serves as the final glue in the signal path that brings it all together.CV inputs for Drive, Filter, Tape Saturation, and LoFi opens loads of creative possibilities. Hue is a textural beast when creative modulation is thrown at it.

Hue puts the power to shape and transform your sound at your fingertips. It's great for beefing up drums and equally as magical on melodic content. Hue can be the glue that brings it all together. It also, pairs well with Trinity and Osiris. All in all, Hue exemplifies the tagline "Made for eurorack, dope enough for boombap!"

Tech Specs

Width: 6HP
Depth: 28mm
Power: 50mA +12V, 50mA -12V

Features
5 effects (Drive, Filter, Tape Saturation, LoFi, Compressor.)
4 CV inputs for modulating the effects
Mono in and mono out
6HP

Notes: The #1 EQ pedal returns - better than ever

Empress Effects have brought back the most sought-after Parametric EQ pedal, with groundbreaking upgrades.

Everything people loved about the original ParaEq was kept, and more fidelity and control have been added.

More Control

Whether you're trying to cut through a mix or fix a feedback issue, you need precision! The ParaEq MKII offers the most control of any pedal EQ on the market.

More Sweetness

Effortlessly sweeten your tone with beautiful sounding, super smooth Baxandall filters for broad high and low frequency shelving adjustments on the Deluxe.

More Power

The ParaEq MKII pedals operates internally at 27V, providing clean headroom without unwanted clipping.

More Purity

This pedal is able to offer the most control without degradation to the tone due to minimal circuit topology00-the opposite of graphic EQs.

Why Choose Parametric EQ over Graphic EQ?
Parametric VS Graphic EQ Graph
Graphic equalizers provide a convenient visual sense of the EQ curve. However, there is a tradeoff in transparency and precision.

The graph here shows the ParaEq MKII Deluxe (cyan) and a 7-band graphic EQ pedal (magenta) both providing a +4dB boost at around 2 kHz. As can be seen, the ParaEq is much more precise in the changes it can make, whereas the graphic EQ affects nearly the entire frequency spectrum. Furthermore, at around 10kHz the ParaEq is providing unity gain, whereas the graphic EQ is attenuating the signal by nearly 6dB. This makes the ParaEq a more transparent circuit than the graphic EQ.

This combination of transparency and precision is why recording studio control rooms are dominated by parametric equalizers, and why they're a great choice for creative and corrective EQ on your pedalboard.

Which ParaEq Do You Need?

The original ParaEq has been loved and trusted by musicians on a variety of instruments for over a decade. Both the ParaEq MKII and the ParaEq MKII Deluxe feature a low-noise, transparent signal path that is extremely versatile.

With three fully parametric bands, you can simultaneously achieve broad tonal shaping and precise fine-tuning to sculpt your perfect sound.

The ParaEQ MKII Deluxe will appeal to players who:

Need high-pass and low-pass filters for precision work at the frequency extremes
Want the glorious sound of Bandaxall filters for sparkling high end or extra weight in the low end
Want to be prepared for any EQ situation

Specifications

Input Impedance: 1MO
Output Impedance: 100O
Frequency Response (-3dB): 22Hz - 25kHz
Total Harmonic Distortion: < 0.05%
Noise: > 107dB
Headroom: +30dBu
Input Voltage: 9VDC Centre-Negative
Required Current: 300mA
Power Input Connector: 2.1mm Barrel Connector
Height (Enclosure Only): 1.5"
Height (Including Controls): 2.5"
Length: 3.5"
Width: 4.5"
Weight: 1lb

Notes: A full size version of Mutable Instruments Warps. It is functionally identical and will run all firmware that ran on the original.

Width: 10hp
12V: 110mA
-12V: 5mA

Notes: Dusky drama

Gloamer is an all-analogue, polyphonic amplitude synthesizer that alters the attack and decay time of any sound source without sacrificing the fidelity of the original tone. Its attack function provides a pick-triggered volume swell: a cinematic "slow gear" effect that is smooth and controllable with variable timing from extremely fast to very slow. The volume swell cycle can be reset at any moment by muting, allowing players to craft bowed string-like lines and chords with ease. Gloamer also features a powerful optical compressor that can add subtle punch or extreme sustain, helping to maintain a smooth volume swell effect even with very long attack times. A Volume knob controls loudness at the peak of the attack cycle, while a master Blend control allows players to layer an uncompressed clean sound in with the volume swell effect. Additionally, when activated, the Decay function causes notes to fade out once the attack cycle is complete. When the decay cycle is completed, an auto-reset function causes the attack to begin again immediately, as long as there is audio input. This allows you to create a wide range of undulating, asymmetrical tremolos at slower settings as well as pulsating stutter effects when using faster attack and decay times.

Knob-by-knob

Volume: Sets the master output volume of the effect when engaged.
Compression: Determines the balance of clean and compressed signal.
Blend: Determines the balance of clean signal and effect.
Attack: Determines the duration of time it takes for a note to swell in from silent to full volume.
Decay: Determines the duration of time it takes for a note to fade out from full volume to silence.
Sensitivity: Determines how much input signal is needed to reset the attack and decay cycle.
Ready (LED): Signals when the pedal is armed and ready to begin the attack and/or decay cycle.

A hi-fi attack and decay master
Gloamer was designed to allow players to change the nature of their attack and decay while maintaining pristine, hi-fidelity audio. Easily swell blooming single note lines or full, lush chords and become the string section you've always wanted to hire but can't afford.

Model name: Gloamer
SKU: ATS
Function: Volume Swell with Compressor
Category 1: Modulation
Category 2: Compression

Bypass: True Bypass

Electronics

Voltage: 9VDC
Current draw: 100mA
Input impedance: 470K
Output impedance: 150 ohms

Body:

Length (in): 3.5
Width (in): 4.75
Height (in): 2.5
Weight (lbs): 1

Notes: The Aether is a modulating delay pedal.

The initial vision for the design of The Aether came shortly after the release of the Wardenclyffe Deluxe. The intention was to take design the philosophies and incorporate tonal characteristics that made the Wardenclyffe so special, but this time as a delay pedal.

At the heart of The Aether is a PT2399, tap tempo delay. It has the standard Echo, Feedback, and Time controls you would expect on any delay, but what makes it special is the Color, Saturation, and Degrade Controls. The Color toggle completely changes the character of the Aether and has two voices: Warm Analog and Bright Tape. The Saturation knob is a gain adjustment that overdrives the delay chip. The Degrade toggle adds lofi textures and artifacts to the delay line. The Degrade toggle removes a very vital section of the delay circuitry that keeps the delay stable with longer delay times. As you increase the delay time, the artifacts become more present and lofi.

The Aether uses a simple, but versatile modulation LFO core inspired by the Wardenclyffe, but with more features. The LFO cores sets it apart from other modulated delays out there. The speed of the modulation core can be set 3 different ways: Rate knob, tap tempo tact switch, and Sync toggle. When the Sync toggle is set to its middle position, the LFO can run at whatever speed you want. When the Sync toggle is in the up position it is synced to the delay time. When the Sync toggle is in the down position, it is synced to delay time, but in half-time for slower evolving moduation. The Shift knob determines the depth of the modulation; this has plenty of range in case you want to get really obscene. The Stray toggle changes the LFO from a typical Sine wave to a Slewed Random waveform. Creative exploration of the modulation section of The Aether is strongly encouraged. The way the delay rate and LFO rate interact with each other can yield very creative results.

Notes: *** New features in version 2.0 ***

The new features expand its capabilities meaning it's easier to use whilst making it a more flexible music production tool.

Resampling

Patterns and tracks can be resampled by internally recording the audio output into a new sample. Real-time resampling of your keyboard playing is also possible.

Chopping

Two new voice modes called 'Drum' and 'Chop' auto-slice samples easily with the newly developed Downbeat Divider*. Sliced sections of a sample are then spread across the keyboard making finger drumming possible.

Remix Effect

A beat repeater effect 'R.MIX', added to the master effect options, makes glitchy real-time performances possible.

The new features are designed to work well with each other so you can easily create drum tracks with auto-slicing and record lively performances that are not constrained by the grid of the internal step sequencer.You can also resample samples and tracks for infinite effects processing.

A quirky take on sampling from this 12-bit groovebox inspired by classic 12-bit samplers like the Akai MPC60. Gritty, distinctive sound and some nice sequencing options.

Supplier's Notes:
Retro sampling engine with 12bit Sampler mode

The LIVEN Lofi-12 has a 16bit - 12kHz/24kHz sampling engine with the 12bit Sampler mode that will turn any sound into a pleasing lo-fi sound.

Like the many legendary samplers that were released in the late 80s, this is a genuine low-bit and low sampling frequency sound that cannot be obtained authentically with bit crusher effects and other modern sound degrading tools.

Up to 4 seconds mono sampling per sample slot (2 seconds mono sampling at the 24kHz mode). Start and end point trimming, pitch adjustment, reverse playback, sustain loop, filtering and LFO modulation are all possible.

Easily play samples chromatically across the keyboard

Sounds sampled by the LIVEN Lofi-12 are automatically assigned to the keyboard and can be played easily at different pitches.

The well-known vintage sampler technique of sampling a 33 RPM vinyl at 45 RPM then slowing it down created the gritty, lo-fi sound that is often heard in '90s hip-hop.
The LIVEN Lofi-12 makes it easy to recreate that sound!

80 carefully selected lo-fi preset sounds are included.

Powerful 4-track sequencer with parameter and sound locking
The LIVEN Lofi-12 is equipped with the powerful 4-track step sequencer that has earned the LIVEN XFM a solid reputation.

You can easily create a 4-part song by selecting a sampled sound for each track, and with the Sound Lock function, you can easily switch sampled sounds for each phrase or sequencer step, allowing you to use an almost infinite combination of sounds within a single song.

Sequence up to 64 steps per pattern.

Save up to 64 patterns.

Sub-divide the tempo down to 32nd notes.

Program notes step by step or record them in real time. Additionally, you can also input notes to specific steps while the sequencer is playing to add variation.

The Parameter Lock function allows you to record knob changes into your patterns. This can be recorded live, or programmed in step by step.

The Sound Lock function allows you to record selected sound changes into your patterns. You can use an almost infinite combination of sounds within a single song.

Laid-back knob for creating drunk beats
The Laid-back knob on the LIVEN Lofi-12 allows you to delay the start of the selected sampled sound.

For example, you can slightly delay the snare drum sound in your drum pattern, or use the Parameter Lock function to shift the sound timing later for each step individually.

11 types of Effects each track and 8 types of Master Effect
The LIVEN Lofi-12 features independent effects on all four tracks.
You can select from 11 types of effects from the LIVEN series, and the effect parameters can be automated in steps using the Parameter Lock function.

In addition, 6 types of high-quality Reverbs + Cassette Tape Simulator and Vinyl Simulator are included as the master effect.
The send amount can be adjusted for each track for mixing.

Specifications

Sampler
16bit - 12kHz or 24kHz (switchable) linear PCM sampling (mono)
12bit Sampler mode
Sampling up to 4 seconds per sample (12kHz) or 2 seconds per sample (24kHz)
Auto start sampling function with the input level (input level can be set)
Start/end point, attack, release, pitch, and level adjustment
Reverse playback
Sustain loop settings
Maximum polyphony: 10 voices
128 sample memory slots (16 x 8 banks)
Import and export of a slot or banks of samples (via MIDI)
*Import of audio files from PC/Mac is not supported.


10-note polyphonic mode
Mono mode with adjustable glide time
Legato mode with adjustable glide time
Arpeggiator modes (Up, Down, UpDown, DownUp, Up&Down, Down&Up, Up+1, Up+2, Down-1, Down-2, Random, Play Order)

Filter
Low Pass
High Pass
Band Pass
Each track has its own filter and envelope

LFO
Each track has one LFO which can affect both pitch and filter cutoff with separate adjustable levels
Adjustable LFO Shapes
Adjustable start time delay for each LFO

Sweep
Sweep with adjustable speed, range, and curve

Effects

Track effects

One effect per track
Chorus
Flanger
Tremolo
Delay
Distortion
Bit Crusher
Low Pass Filter
High Pass Filter
Isolator
Tilt EQ
Compressor

Master effects

Reverb send amount can be set independently for each track
Hall Reverb
Room Reverb
Arena Reverb
Plate Reverb
Tunnel Reverb
Infinity Reverb
Cassette Tape Simulator
Vinyl Simulator

Sequencer

4 tracks
Up to 64 steps per pattern
64 patterns
Step length can be set from 1/1 to 1/32
Real-time recording
Directly enter notes for each step when playback is on or off
Enter longer notes (Tied notes)
Metronome and pre-count function
Step copy and paste function
Track copy and paste function
Transpose function
Swing function
Pattern BPM / Global BPM can be set
Pattern chain function

Notes: The OpticTone is a combination of a 12dB multi-mode Vactrol Filter and a Vactrol Voltage Controlled Amplifier.

It is a completely original circuit inspired by the singular nature of Vactrols and their fluid and natural character.

The Filter section provides the three fundamental filter types: Lowpass, Bandpass and Highpass.

A Resonance knob with voltage control input is available for improved modulation flexibility. The feedback knob interacts with the Resonance path, tempering it from creamy resonance to wacky self-oscillation.

Filter and VCA run in parallel, both are controlled by the Freq/Amp knob and it's associated voltage-control input. The combination of both signals can be crossfaded with a dedicated knob.

The Freq/Amp is also controlled with direct touch control on the panel via the 3 lines below the knob.

The filter frequency control can be inverted by the Inv Freq switch, providing the possibility to change the filter direction. This feature allows the filter to "close" when the VCA is "opening" or the other way around.

The Ping input allows to generate the well known vactrol filter percussive sounds if a gate or trigger signal is provided. The Ping frequency if controlled by the Freq/Amp knob, ranging from low kicks drums to high pitch bongos.

There is also a Drive knob to take care of your saturation needs. The Overdrive range is wide, from soft textural clipping to heavy distortion.

All voltage controlled inputs have an attenuator-inverter knob.

Features:

Vatrol based 12dB multi-mode Voltage Controlled Filter: Lowpass, Bandpass and Highpass.
Vactrol Based Voltage Controlled Amplifier.
Crossfade between VCF and VCA section.
Voltage controlled Resonance.
Ping Input for percussive sounds generation.
Cutoff Frequency polarity inversion switch. Doesn't change VCA polarity
Overdrive and Feedback controls.
Attenuator/inverter knobs on all voltage controlled inputs
Touch control over Frequency and Amplitude.


Specs:

Width: 10HP
Depth: 33mm
Power consumption: 55mA +12 / 55mA -12
Eurorack Format
Doepfer power connection

Notes: ILLUMINATOR is an eight channel converter that turns Eurorack and analog CV signals into a voltage that drives LEDs and LED strips, creating a unique light show in sync with your live performance. CV signals coming from your music gear are already pulsating with the different parts and sounds of your track, so there is no need for any kind of programming or light operator.

You can focus on playing your set and let ILLUMINATOR take care of the rest, creating a dynamic visual show that follows your tracks down to every note and beat!

No presets, no memory- just your music driving the lights. Create intense strobe-like effects by connecting rapid hi-hats from your analogue drums, or use slow external LFOs for a moody ambience during your ambient sessions.

ILLUMINATOR is compatible with standard 12V LED strips that are affordable and widely available. LED strips are flexible and typically come with adhesive on the back, so it's easy to attach them to any objects and surfaces, including irregular and unusual ones. It can be your Eurorack case, synth stands, walls of the venue, furniture and even your body! This way you can create a unique light show that would otherwise require an expensive (and unwieldy!) lighting setup. Everything you need for your ILLUMINATOR show easily fits into a small backpack for just a couple hundred euros.

ILLUMINATOR can also run an art installation, as LED strips are far from its only application. It can drive anything that accepts DC 12V with a current up to 0.5A. You can hook up anything from motors, electromagnets to old-fashioned filament bulbs. It's the perfect beating heart for your weird mechanical steampunk orchestra. Your imagination is the limit!

ILLUMINATOR accepts all types of CV signals in the range from 3 to 20 volts. Each of the eight channels contains an individual trimmer pot that defines the sensitivity of the channel. It not only adjusts the optimal input range for connected CV sources, but it can also set the brightness of each LED strip. Default factory setting for all trimmer pots is made for the range of 5V, compatible with most gear out of the box.

Applying bipolar CV is also possible but the negative part of the signal will not light up the LEDs (everything below zero will be processed as zero).

CV signals can be connected to ILLUMINATOR using Eurorack mini-jacks or PULSAR-23-like pins and alligator clips. PSU DC IN and all outputs are standard DC sockets 5.5×2.1mm center plus.

Technical specs

Number of channels: 8
Supply voltage: DC 12V
Supply voltage socket: 5.5 × 2.1 mm (center plus)
Output voltage: DC 12V
Output LED socket: 5.5 × 2.1 mm (center plus)
Maximum total power of all channels: 48 watts
Maximum total current of all channels: 4A
Recommended maximum current for one channel: 0.5A
Absolute maximum current for one channel: 1.5A
Input voltage range: 3 - 20 Volts
Input impedance / with correct adjustment of the input sensitivity: > 5.7 kOm / 100 kOm
Input sockets: Eurorack mini-jacks and Pulsar-23 / Ornament-8 pins
Number of mini-jack sockets: 8 (1 for each channel)
Number of Pulsar-23 pins: 9 (1 for each channel + 1 common ground)
LED Items: 8
LED Color: 4000K x 2, Red x 2, Blue x 2, Green x 2
LED Length: 1.5 + 3 m cable
LED Power: 4.8 W/M
LED Voltage: DC 12V
LED IP Rate: IP65
Power supply Input: 100 - 240 VAC, 1.5 A, 50/60 Hz
Power supply Output: 12 DC, 5A
Dimensions: 275 x 70 x 40 mm
Weight: 300 g
Box size: 375 x 310 x 85 mm
Box weight: ~ 800 g

Product dimensions
Illuminator: 275 x 70 x 40 mm
Box: 375 x 310 x 85 mm
Net and gross weight
Illuminator net weight: 300 g
Gross weight: ~ 800 g

Notes: Mar Karit is a tube pedal preamplifier.

It contains 2 tubes, one NOS EF86 for the preamp section and one 6J1P (6ak5) for the buffer output. It is an all tube Preamp.

It runs on a 9V power supply (center positive) - and operate internally at 35volts. Furthermore, it produces a warm, rich, and full-bodied sound, and can capture both the softest and loudest sounds with great accuracy and clarity.

Pushed a little too far, it can produce pleasing harmonic distortions and warm saturations. The two volume knobs control the level of each stage.

All tube preamp
EF86 and 6J1P
High end components (Nichicon, Panasonic caps, Alpha pots and Switch, Rean Jacks...)
Made in France
True Bypass
9V DC / input power supply positive tip

Notes: Analogue tones are on the menu with this beautifully designed bucket brigade chorus/vibrato. Warm, organic sound with lots of modulation options and expression pedal input.

Supplier's Notes:
The Tempest features a full analogue pitch shifting circuit designed around a BBD chip

Offers digital control and 4 different RAMP options over Rate, Depth or Blend.

Expression or Ramp are selectable via firmware, and the expression jack can be used for external tap/ramp & engage control.

Lag Control
4 different wave shapes
Tone control
Blend 100% dry CCW, 100% wet CW and rich lush chorus at 50%
Rate, Depth and Blend ramping engine
Tap tempo w/subdivisions
Ramp up, Ramp down, bounce up&down, bounce down/up
EXP or CV input jack to control over ramp parameters
Soft switch with relay bypass, momentary & latching operation
Top mounted jacks

Notes: A Juno-inspired oscillator module? We're flattered, but credit has to go to Roland for this one. Based on the Juno-106's digitally-controlled analogue oscillators, the Castor & Pollux modernises the 80s design with a built-in LFO and hard sync.

Supplier's Notes:
Twins that dance in and out of phase, never completely together but never fully apart, bound to each other in the infinite universe.

Castor & Pollux is a dual oscillator that echoes back to the legendary Roland Juno but shines with its own unique, massive voice. It contains two digitally-controlled analogue oscillators implemented using a faithfully modernized version of the original Juno 106 design. It builds on the classic '80s sounds of its inspiration by using the second oscillator and internal LFO to layer in thick detuned sounds and harmonically complex hard synced waveforms.

Castor & Pollux II brings a redesigned interface and moves individual waveform outputs to an included expansion. Both versions have the same features and use the same firmware.

14 HP
+12 V @ 100 mA, -12 V @ 35 mA
25 mm deep
2 separate oscillators
7 octave range
9 total outputs with waveform outputs and onboard mixers
Pitch CV input jacks (0 V to 6 V) and pitch knobs (-1 to +1 octave, configurable)
Pulse width CV input jacks and knobs
Hard sync
Hardware chorusing
Internal low-frequency oscillator (LFO)

Notes: Particles, is 4 channels of trigger modulation, capable of mathematically variating and manipulating your patterns with a combination of features to play with.
It can evolve your rhythmic idea into more complex and groovy patterns which are difficult to achieve without music knowledge.

You can create your algorithms from the rhythmic tools provided to be able to change the patterns instantaneously in many ways without worrying to sacrifice
the original idea.

You can shift and scramble the outputs, you can repeat the triggers with different time signatures to transform the grooves, mute in different ways, disappear by probability trigger inputs, disappear by probability repetitions, use sequential switching to shift randomly with a different kind of resetting, bypass each channel and set it individually the amount of each feature per channel when feeding external CV.
The idea of Particles, was designed to provide features for building complex breaks, grooves, organic-evolving percussion sounds, and different options for
arpeggios, and even bass line grooves, the limits are decided by you.

Particles Features

4 trigger inputs/outs.

Repetitions with different distribution times to choose from.

Manually shift the output channels, scramble them randomly or clocked them in forward mode.

Reset the outputs to 4 different shift modes.

Disappear repetitions by probability per channel.

Disappear the input trigger by probability per channel.

Mute each channel with clock divisions from the input clock.

Mute manually the outputs

Disable triplets from repetitions to have musical patterns

Random voltages output clocked from clock input.

The slider keeps the adjusted value from each feature.

Notes: Particles, is 4 channels of trigger modulation, capable of mathematically variating and manipulating your patterns with a combination of features to play with.
It can evolve your rhythmic idea into more complex and groovy patterns which are difficult to achieve without music knowledge.

You can create your algorithms from the rhythmic tools provided to be able to change the patterns instantaneously in many ways without worrying to sacrifice
the original idea.

You can shift and scramble the outputs, you can repeat the triggers with different time signatures to transform the grooves, mute in different ways, disappear by probability trigger inputs, disappear by probability repetitions, use sequential switching to shift randomly with a different kind of resetting, bypass each channel and set it individually the amount of each feature per channel when feeding external CV.
The idea of Particles, was designed to provide features for building complex breaks, grooves, organic-evolving percussion sounds, and different options for
arpeggios, and even bass line grooves, the limits are decided by you.

Particles Features

4 trigger inputs/outs.

Repetitions with different distribution times to choose from.

Manually shift the output channels, scramble them randomly or clocked them in forward mode.

Reset the outputs to 4 different shift modes.

Disappear repetitions by probability per channel.

Disappear the input trigger by probability per channel.

Mute each channel with clock divisions from the input clock.

Mute manually the outputs

Disable triplets from repetitions to have musical patterns

Random voltages output clocked from clock input.

The slider keeps the adjusted value from each feature.

Notes: dsp.cpoffee's custom everything-including-kitchen-sink dsp development platform.

At the core of this is an Electrosmith Daisy Patch Submodule, combined with a 12-bit 4 channel SPI DAC [DAC7554], and supporting hardware for more IO

Features
- 8x pots normalled to +5V
- 8x CV in breaks normalled connection and pot acts as an attenuator
- 2x gate in
- 2x gate out
- High-fidelity stereo in/out (Daisy Patch Submodule, using an WM8731 codec)
- 2x 12-bit CV out from Daisy Patch Submodule, scaled to -5v to 10v
- 4x 12-bit CV (or lofi audio w/ some hacking) from external DAC7554, scaled to -7v to 7v
- TRS MIDI in/out (in is auto-sensing for type a/b)
- SD card slot
- Expansion header for +5v, +3v3, SPI, UART, I2C, and USB connections

Notes: This is an exact hardware replica of the Mutable Instruments Plaits module.

Width: 12hp
12V: 50mA
-12V: 5mA

Notes: Part of Sonicware's excellent Liven series, the Bass & Beats packs a powerful wavetable synth engine designed for dance music. Presets are classified by genre, making it quick to nail sounds.

Supplier's Notes:
Unleash this wavetable engine to create thick basslines that fit into all genres.

Combine wavetable modulation and our rich resonant filter to create satisfying growls and wobbles.

The bass synth engine includes:
- Two independent Wavetable oscillators with the 64 available wavetables.
- One sub-oscillator
- One noise generator which can create 16 different noise types.

Add even more flavor to your basslines with the built-in LFO, envelope generator, unison control, multi-mode filter, and distortion effects.
A Library of Rhythm Sounds Specialized for Electronic Dance Music

The Liven Bass & Beats is loaded with 350 high-quality rhythm sounds carefully selected for modern and timeless compositions.
The library of drum sounds also include risers and tension releases SFX which are useful tools when transitioning to new sections of your compositions.

Hit the Ground Running With 64 Bass Patches That Cover All Genres

The LIVEN Bass & Beats includes 64 bass presets including battle tested favorites such as the Reese Bass, Future Bounce Bass, Wobble Bass, Growl Bass, Neuro Bass, Deep House Bass, Acid Bass, 808 Sub Bass, and more.
Use these presets to quickly dial in the vibe of a specific genre.

Ready-To-Go Preset Drum Kits

The drum sounds are organized into well balanced kits for specific genres such as: DUBSTEP, HOUSE, HIPHOP, TRAP, TECHNO, EDM, R&B, DOWNTEMPO, CHILL TRANCE, DRUM'N'BASS, JUNGLE, FUTURE BASS, ELECTRO, ELECTRONICA, IDM, DISCO, BREAK BEATS, etc.

You can also mix and match sounds from the drum library to create your own custom kits. Side-Chain Compressor

The LIVEN Bass and Beats has built-in sidechain compression function that ducks the volume of the bass and the line-in audio. The amount of this effect is variable so you can dial it in to taste or turn it off when it is not needed.

Two Performance Knobs Can Be Mapped to Many Parameters at Once

Two ASSIGN knobs are provided for complex multi-parameter control.

Similar to the Turnado1 VST plugin, our "ASSIGN" knobs allow you to map many parameters to a single knob to create powerful effects which transform or mangle your sound with a single twist.

All preset patches include these "ASSIGN" knobs pre-programmed and ready for sonic exploration.

The "ASSIGN" knobs can also be parameter locked to create automated changes to multiple parameters over time.

Quick Muting and Un-Muting for Each Drum Sound

Each rhythm track consists of 16 individual drum sounds. Each sound can be individually muted and unmuted with a single button press. This allows users to introduce drum elements on-the-fly to build energy and create unique breakdowns.

Dedicated Mixer Controls

Dedicated controls for balancing the levels of you drums, bass, and line input. These knobs can be used to create an overall volume balance, or they can be used to create drops and breakdowns during live performances.

Advanced Bass Shaping Tools

The DIMENSION knob increases the stereo width of the bass synth without losing clarity or richness.

The M.Gun effect uses a rapid tremolo to add glitchy grit.

Explore Beyond the Preset Sounds With the Bass Engine Edit Mode Overlay

Build your own bass sounds from scratch or modify the presets.

Every parameter of the bass engine is accessible when the edit mode active.

Slip on the overlay and enter a whole new world of bass sound design.

Synth Engine Basic Configuration

2x Wavetable OSC: Each of the wavetable oscillators can assigned one of the 64 wavetables.

SUB OSC: The sub-oscillator provides solid, foundational bass support.

It can generate sine, triangle, sawtooth, square, LOG, and random waveforms.

NOISE Generator: The noise generator can generate 16 different types of noise, including both white and pink noise. It is a powerful tool for aggressive and industrial tones.

Deep Modulation

Almost all of the internal parameters of this device can be targets for modulation. The LFO, Envelope Generator, and ASSIGN knobs provide a wide range of ways to modulate every aspect of your sound.

For example, the LFO could modulate the settings of the Envelope Generator which is simultaneously modulating the Bass engine's wavetable position.

Notes: Great value from this curious little semi-modular FM synth. Two carriers, two modulators and virtual analogue delay give you plenty of creative power. Ideal for drones, weirdo synth parts and special FX.

Supplier's Notes:
The Mystic is an experimental FM synth with 2 carrier frequencies, 2 modulators, and an analogue-style delay. All of the synth parameters are controllable via cv as well as time control in the delay section.

The Mystic generates colossal waves that swirl, echo, ascend, and plunge into an ever-changing, sonic playground. Transcend reality and let the mystic guide the way!

Powering Tip

The Mystic uses a 9VDC, negative-tip, 200ma power supply. It is a standard Boss-style power supply used for most effects pedals. The power supply is sold separately.

Once plugged in, the Mystic is powered up and ready to go. Simply unplug it from the wall when not in use.

Output: line level

A note about the output level

The Mystic runs at line level, to be used with pedals and other devices that also run at line level. If using with Eurorack, the output level needs to be converted, just as you would with any guitar pedal.

There are several Eurorack modules that do this, but the one Recovery use and recommend is the Strymon AA.1.

Output jack

The Mystic requires a 3.5mm cable to connect the audio output to other devices.

Latching switch

Use this to latch the sound on and off. Up is on, and down is off.

Controls

Carrier frequency controls

Each carrier works together to build a waveform. Usually it's CF2 that responds to pitch tracking, but that can vary depending on the setting. Think of CF1 and CF2 as 2 sign waves being folded in various ways. Sending independent CV into each one will not get traditional 1 v/oct pitch results, but a combination of pitch, texture and tone.

Modulator controls

These are used to shape the tone and texture of the folded waveform you've created with CF1 and CF2. Modulation rate will control the speed of the modulation texture.


Momentary button

Use this to momentarily turn sound on and off. The momentary Button only functions when the Latching Switch is in the off (down) position.

Latching switch

Use this to latch the sound on and off. Up is on, and down is off.

Delay time controls

Controls the delay / echo time.

Delay feedback

Controls the number of delay / echo repeats.

Delay mix

Controls the volume of the delay / echo signal.

Volume

Controls the overall output volume of the Mystic.

CV controls

These will accept CV voltage of up to +5 volts. The parameter you are controlling should be at 12 0'clock to get the most effect from the voltage input.

Notes: Distortion and reverb meet in this unique pedal, sporting a joystick to tweak the sound and the option to flip the order of the two effects in the signal chain. Simple, quirky and effective.

Supplier's Notes:
Walrus Audio give you the two most quintessential effects that yield unruly amounts of power and influence to an instrumentalist: reverb and distortion. They have been harnessed and woven together for an eternity of ethereal power with The Melee: Wall of Noise. The Melee unapologetically uses a joystick to meld reverb and distortion into one massive blaze of sound. With the flip of the order switch, run the distortion into the reverb or reverb into distortion; signal chain is your call now. For the explorer, the Melee can run one of three different reverb programs Ambient, Octave, and Reverse.

In a less is more approach, Walrus Audio have intentionally decided on controls that are fun to use and will inspire a wealth of creative output. Use the joystick to control the amount of distortion by moving it up and down. Moving the joystick left and right will adjust your reverb mix. The tone and decay toggles have low, medium, and high settings. Modulation can be added to the wet signal by holding down the bypass switch and moving the decay toggle. The left position is no modulation, the middle is a slight modulation, and the right is a high modulation.

Algorithms

The Melee is equipped with three different reverb programs, which can be changed by simultaneously pressing the bypass and sustain stomp switches. Experiment with the order toggle switch to hear how differently these all react in front and after the distortion!

Ambient Reverb (Pink LED) - Huge reverb capable of massive trails and engulfing your chords into an angry wash of sound. Great for soaring melodic lines or shoegaze-driven chord progressions.
Octave Down Reverb (Yellow LED) - Similar to the Dark mode in the Slo, you'll find an eerie lower octave hovering in the reverb trail for a nice and dark atmospheric touch.
Reverse Reverb with Feedback (Blue LED) - Add reversed reverb trails back into your signal, create gentle melodies or push into reverse feedback overload. Big, slow, and sad chords love to hang out here.

Momentary

Press and hold the sustain switch to ramp up the reverb trails. Release and the trails will ramp back down to where the decay switch is currently set. The sustain switch can also latch in all three programs. Press and release the Sustain switch to capture and sustain the current reverb decay for long pad-like sounds in your wet mix. Press again to release the latch, and the reverb trail will taper off based on the position of the decay knob.

Specs

The Melee comes coated in a glossy neon pink enclosure with white, yellow, and green inks with art by
David Huttner.
The die-cast enclosure's exact size is 3.62" x 4.79" x 3.14" (including joystick height).
Three bypass modes, DSP, DSP + True, True Bypass
Power requirements are 9VDC, centre negative (200mA minimum).
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Power supply not included.

Notes: Armed with gold plated quarter-inch TRS jacks and built-in Bluetooth, Black Lion's PBR TRS BT is a future-proof patch bay built for the next technological frontier.

Black Lion's TRS BT model from their PBR range is a 46-point patch back with 94 audiophile-grade 6.35mm gold-plated TRS connectors. TRS BT features to operating modes (normal and half-normal) which can easily be toggled using a switch situated on the ruggedly anodised front panel.

For patching in modern devices at lightning speed and with zero-cabling, the TRS BT also features built-in Bluetooth connectivity. In true Black Lion fashion, every BLA-installed Bluetooth module is modded to support full lossless audio for listening and sampling at optimum resolution.

Specifications

Number of Points: 46
Front Connectors: 23x TRS Jack
Rear Connectors: 23x TRS Jack, 2x TRS Jack (BT out), USB-C
Dimensions: 534 x 102 x 51mm, 1.4kg

Notes: An absolute essential for any studio juggling outboard, effects processors, consoles or multiple synths, Black Lion's PBR TRS is an organised audio engineer's best friend.

From Black Lion's PBR range of patchbays, the bestselling PBR TRS runs 96 audiophile-grade gold-plated TRS connectors with normal/half-normal switches for each stereo set.

PBR TRS is built to be just at home on the road as in the studio, and features an incredibly hard-wearing black-anodised face plate, armed with white labelling tags for each channel for users to mark their own inputs.

Specifications

Number of Points 48
Front Connectors 48x 1/4" TRS
Rear Connectors 48x 1/4" TRS
Dimensions 534 x 102 x 51mm, 1.4kg (boxed)

Notes: MIX KM (like Feedback's PRE KM channel strip) is based on a famous late seventies small mixer used by many electronic music bands.

Tech specs:

- 35HP front panel
- 35mm depth behind front panel including the power connector
- 6 mono input jacks ( 1 per channel)
- Pot controls for channels : Gain, Hi, Low, Aux1 send, Aux2 send, Pan, Volume
- 6 mute switches (1 per channel)
- Pot controls for master : Master Level, Headphone Level, Aux1 Return, Aux2 Return
- 2 x mono aux send jacks
- 4 mono input jacks for two stereo Aux returns
- 2 jacks for master left and right out
- one 3.5mm stereo jack for headphone out
- boxed 10 pin euro power (+12V / -12V)

Notes: More affordable than the flagship X8 but still offering exceptional sound quality, the X6 is a handheld recorder for every purpose, with built-in mics or XLR inputs, 96-kHz/32-bit resolution and smartphone-style touchscreen control.

Supplier's Notes:
Advanced recording technology, yet simple to use!

Capturing high-resolution audio is easy with the Portacapture X6. The intuitive app-like operation on its large colour touchscreen makes it easy to record or sweeten up your audio in post-processing. Record using the two built-in microphones or plug in your own mics to its two XLR inputs. The recording quality on the Portacapture X6 will be your secret advantage. Its 96-kHz/32-bit floating-point recording technology means that you can capture audio softer or louder than ideal, assuring that you will never miss that moment.

Six different recording apps to choose from

Manual: This is the main app for multi-track recording of up to six audio sources and a stereo mix (2-mix).
Voice: This recording app is ideal for capturing interviews, dictation and meetings.
Podcast: Use this for podcast creation with up to four people.
Music: Choose this app for capturing instrumental and vocal performances.
Field: Ideal for recording nature sounds outdoors.
ASMR: The screen visual effect changes in response to the input sound.

App-like operation
Quickly access your settings and adjustments on the Portacapture X6's large (2.4-inch) colour touchscreen. With the easy-to-navigate interface and helpful tools, you are just a few taps from the perfect setting for your needs. Use the Launcher to select from podcast, music, interviews, field recording and real 6-track recording. Start fast, start right and get exactly what you need.

Audio for video production

When shooting a video, you want to be able to focus on your video production and not worry about your audio. The Portacapture X6 was built with video production in mind. The workflow, presets and user settings save you countless steps. The X6 has your back with its 96 kHz/32-bit float recording technology. Not only does this mean you will have the highest quality audio, but you will have a dynamic range that allows you to overcome those less-than-ideal realities that can often occur on a shoot.

The X6 even gives you a timecode sync option* via Bluetooth (with optional AK-BT1) allowing you to align your audio with your video, even when you have no audio on your camera. Upgrade your audio and reduce your worries with your own Portacapture X6.

Record your way

The Portacapture X6 is ready to record with a few quick taps. The internal high-quality stereo microphones can instantly be rotated from A-B to a true X-Y mic pattern to allow for dialogue or spatial music recording. Have your own mics? Use those thanks to the two included XLR inputs which can also handle line level sources.

The mic preamplifiers are Tascam HDDA (High Definition Discrete Architecture) - providing ultra-low noise and clean transparent audio based on more than 50 years of Tascam know-how.

Record six tracks (four individual track plus stereo mix) simultaneously and even use the X6 as your 6-in/2-out USB audio interface to connect to your computer.

Capture every bit

It would be great if every time you need to capture audio, everything is perfect. Not too loud, not too soft. Of course that is not the reality for most of us. Sometimes a voice or sound will be really soft and in other cases it is blasting. Even in these extremes, you are expected to capture the sound and deliver well-finished audio.

The 32-bit floating point recording technology in the Portacapture X6 gives you a much lower floor and higher ceiling for sound material. The result is that your recording can capture everything from the quietest rustle to the loudest spectacle.

Control the recorder from your phone (with optional Bluetooth adapter)

In those cases where you want to put your audio recorder in one place and operate it from another, the X6 has you covered. With the AK-BT1 Bluetooth adapter (sold separately) and the free Portacapture Control app, it's easy to remote control your X6 wirelessly from your smartphone or tablet.

Imagine the possibilities!

Ready-to-publish audio anywhere

With the Portacapture X6, your audio is ready to share. Built-in signal processing, including a compressor, limiter, high-pass filter, EQ and reverb, adds that studio polish.

Whether you need to tame the wind when recording outside or want to add the ambiance of reverb to your vocals, the X6 has you covered. From smoothing out your input to preventing extreme peaks or eliminating plosives in dialogue, you can count on the Portacapture X6.

Specifications

Recorder specifications

Recording media: microSD card (64 MB - 2 GB), microSDHC card (4-32 GB), microSDXC card (48-512 GB)
Recording/playback formats: WAV (BWF): 44.1/48/96 kHz, 16/24 bit or 32 bit float, MP3: 44.1/48kHz, 128/192/256/320 kbit/s
Input channels: 4 (maximum)
Recording tracks: 6 (4 tracks + stereo mix)

Analogue audio inputs

Mic inputs 3-4 (balanced): XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD), 6.3-mm TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
(phantom power over XLR only)
Input impedance: +/-2.2 kO
Maximum input level: +2 dBu
Minimum input level: -75 dBu
Line inputs 3-4: XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD), 6.3-mm TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
Input impedance: +/-9 kO
Maximum input level: +24 dBu
Minimum input level: -53 dBu
MIC/EXT IN (unbalanced): 3.5-mm mini jack (supports plug-in power)
Input impedance: 10 kO (plug-in power off), 1.8 kO (plug-in power on)
Maximum input level: 0 dBV
Minimum input level: -67 dBV

Analogue audio outputs

Line output (LINE OUT, unbalanced): 3.5-mm stereo mini jack
Output impedance: 200 O
Nominal output level: -14 dBV
Maximum output level: +6 dBV
Headphones output: 3.5-mm stereo mini jack
Maximum output: 45 mW + 45 mW (THD+N: =0.1%, 32 O load)
Built-in speaker: 0.4 W (mono)

Control inputs/outputs

USB port: USB Type-C connector
Format: USB 2.0 High Speed mass storage class
Bluetooth device connector: For Bluetooth adapter (AK-BT1) only

Audio performance

Equivalent input noise (EIN, mic inputs 3-4) =-125 dBu
Frequency response (inputs 3-4 to PCM data): Fs 48 kHz: 20 Hz - 20 kHz, +0/-0.3 dB (JEITA), Fs 96 kHz: 20 Hz - 40 kHz, +0/-0.7 dB (JEITA)

Dynamic range (20 kHz SPCL LPF, A-weighted, Field app)
Inputs 3-4 to PCM data: -112 dB (48/96 kHz)

S/N ratio (20 kHz SPCL LPF, A-weighted)
Inputs 3-4 : 112 dB (48/96 kHz)
MIC/EXT IN: 103 dB (48 kHz), 105 dB (96 kHz)
Total harmonic distortion ratio (THD+N, 1 kHz sine wave, -5 dBFS at input, GAIN at minimum, 20 kHz SPCL LPF)
Inputs 3-4 (LINE IN) to PCM data: 0.008 %
Inputs 3-4 (MIC IN) to PCM data: 0.006 %

Power supply and other specifications

Power supply: 4 AA batteries (alkaline, Ni-MH or lithium-ion)
USB bus power from a computer
AC adapter (TASCAM PS-P520U, sold separately)
Power consumption 7.5 W (maximum)
Display: 2.4-inch full-colour LCD touchscreen
Dimensions (W × H × D): 75 mm × 174 mm × 37 mm (excluding protrusions)
Weight: 365 g (with batteries) / 265 g (without batteries)
Operating temperature range: 0-40 -C

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Module A-121s is a dual multimode filter which can be used for stereo applications as well as for parallel or serial organized dual mono filters. The core is a 12dB multimode filter identical to the modules A-121-2 and A-121-3. The selection of the filter type is continuously from lowpass via notch and highpass to bandpass. We attached great importance to the usability of the manual controls and CV inputs for both stereo and dual mono applications. For the filter parameters frequency (F), resonance (Q) and type (T) common controls and CV inputs as well as single controls and CV inputs are available. For the filter frequency in addition a manual control and CV input for the filter spread (frequency difference or delta F) is available.

Controls:
F: master frequency control for both filters (large knob)
Type 1 / Type 2: filter type panning/morphing L-N-H-B
Link to 1: Toggle switch so that Type 1 also controls type of filter 2 (i.e. simultaneous filter type control for both filters)
SFM1 / SFM2: Single Frequency Modulation controls (polarizers), connected to the corresponding sockets SFM1/SFM2 (socket SFM1 is normalled to a fixed positive voltage, SFM2 is normalled to SFM1, that way the controls SFM1/SFM2 work as frequency controls for each filter provided that no modulation signals are patched to the SFM1/SFM2 sockets)
CFM: common frequency control, controls two VC-polarizers which process the signals connected to the two sockets CFM1/CFM2, CFM2 is normalled to CFM1, that way also the same modulation signal (e.g. an envelope generator) can be used for both filters and the level controlled simultaneously by the CFM control
Delta F: controls the difference between the frequencies of the two filters manually (frequency "spread"), at centre position the frequencies are the same
Delta FM: controls the level of the Delta FM signal (socket), which allows to control the spread between the frequencies also by an external control voltage (e.g. by an LFO or ADSR)
Q: controls the resonance of both filters simultaneously
Level 1 / Level 2: attenuators for the two audio inputs
QM/TM1, QM/TM2: attenuators for the modulation inputs QM/TM1 and QM/TM2

Sockets:
In1 / In2: audio inputs (In2 is normalled to In1)
Out1 / Out2: audio outputs
F: common frequency control input for both filters (~ 1V/oct)
Delta FM: Control voltage for frequency spread, processed by the polarizer Delta FM
SFM1 / SFM2: single frequency modulation inputs, processed by the polarizers SFM1 and SFM2, SFM1 is normalled to a fixed positive voltage, SFM2 is normalled to SFM1#
CFM1 / CFM2: common frequency modulation inputs, processed by the two voltage controlled polarizers controlled by CFM knob, CFM2 is normalled to CFM1
QM/TM1, QM/TM2: the addressing of these sockets/attenuators is defined by internal jumpers. QM means Q modulation (i.e. resonance modulation), TM means filter type modulation (QM1 = resonance modulation filter 1, QM2 = resonance modulation filter 2, TM1 = filter type modulation filter 1, TM2 = filter type modulation filter 2), socket QM/TM1 is normalled to a fixed positive voltage, QM/TM2 is normalled to QM/TM1
A 45 degrees triangle next to a socket means that the switching contact of the socket is normalled to a fixed positive voltage (SFM1, QM/TM1).
A vertical triangle indicates the normalling of two sockets (In1>In2, SFM1>SFM2, CFM1>CFM2, QM/TM1>QM/TM2).

If the filters do not behave as expected please pay attention to these peculiarities:

For the controls SFM1, SFM2, CFM, Delta F and Delta FM the centre position is the neutral position as these are polarizers. If the filter behaves unexpected these controls should be set to centre positions for the time being.

For the controls F, Q, Level 1, Level 2, QM/TM1 und QM/TM2 the fully CCW position is the neutral position as these are standard attenuators. If the filter behaves unexpected at least the controls QM/TM1 and QM/TM2 should be set to fully CCW. Via the normalling of the sockets QM/TM1 and QM/TM2 and the associated controls the filter parameters adjusted by the major controls (e.g. Type 1, Type 2 or Q) may be overwritten.

By means of small circles at the bottom right side of the front panel the user can mark the function of the QM/TM inputs. These assignments are possible:
QM/TM1 controls QM1, QM/TM2 controls QM2, the filter types are not controlled by external CVs
QM/TM1 controls TM1, QM/TM2 controls TM2, the resonances are not controlled by external CVs
QM/TM1 controls QM1 and QM2 simultaneously, QM/TM2 controls TM1 and TM2 simultaneously

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


*** New features in version 2.0 ***

The new features expand its capabilities meaning it's easier to use whilst making it a more flexible music production tool.

Resampling

Patterns and tracks can be resampled by internally recording the audio output into a new sample. Real-time resampling of your keyboard playing is also possible.

Chopping

Two new voice modes called 'Drum' and 'Chop' auto-slice samples easily with the newly developed Downbeat Divider*. Sliced sections of a sample are then spread across the keyboard making finger drumming possible.

Remix Effect

A beat repeater effect 'R.MIX', added to the master effect options, makes glitchy real-time performances possible.

The new features are designed to work well with each other so you can easily create drum tracks with auto-slicing and record lively performances that are not constrained by the grid of the internal step sequencer.You can also resample samples and tracks for infinite effects processing.

A quirky take on sampling from this 12-bit groovebox inspired by classic 12-bit samplers like the Akai MPC60. Gritty, distinctive sound and some nice sequencing options.

Supplier's Notes:
Retro sampling engine with 12bit Sampler mode

The LIVEN Lofi-12 has a 16bit - 12kHz/24kHz sampling engine with the 12bit Sampler mode that will turn any sound into a pleasing lo-fi sound.

Like the many legendary samplers that were released in the late 80s, this is a genuine low-bit and low sampling frequency sound that cannot be obtained authentically with bit crusher effects and other modern sound degrading tools.

Up to 4 seconds mono sampling per sample slot (2 seconds mono sampling at the 24kHz mode). Start and end point trimming, pitch adjustment, reverse playback, sustain loop, filtering and LFO modulation are all possible.

Easily play samples chromatically across the keyboard

Sounds sampled by the LIVEN Lofi-12 are automatically assigned to the keyboard and can be played easily at different pitches.

The well-known vintage sampler technique of sampling a 33 RPM vinyl at 45 RPM then slowing it down created the gritty, lo-fi sound that is often heard in '90s hip-hop.
The LIVEN Lofi-12 makes it easy to recreate that sound!

80 carefully selected lo-fi preset sounds are included.

Powerful 4-track sequencer with parameter and sound locking
The LIVEN Lofi-12 is equipped with the powerful 4-track step sequencer that has earned the LIVEN XFM a solid reputation.

You can easily create a 4-part song by selecting a sampled sound for each track, and with the Sound Lock function, you can easily switch sampled sounds for each phrase or sequencer step, allowing you to use an almost infinite combination of sounds within a single song.

Sequence up to 64 steps per pattern.

Save up to 64 patterns.

Sub-divide the tempo down to 32nd notes.

Program notes step by step or record them in real time. Additionally, you can also input notes to specific steps while the sequencer is playing to add variation.

The Parameter Lock function allows you to record knob changes into your patterns. This can be recorded live, or programmed in step by step.

The Sound Lock function allows you to record selected sound changes into your patterns. You can use an almost infinite combination of sounds within a single song.

Laid-back knob for creating drunk beats
The Laid-back knob on the LIVEN Lofi-12 allows you to delay the start of the selected sampled sound.

For example, you can slightly delay the snare drum sound in your drum pattern, or use the Parameter Lock function to shift the sound timing later for each step individually.

11 types of Effects each track and 8 types of Master Effect
The LIVEN Lofi-12 features independent effects on all four tracks.
You can select from 11 types of effects from the LIVEN series, and the effect parameters can be automated in steps using the Parameter Lock function.

In addition, 6 types of high-quality Reverbs + Cassette Tape Simulator and Vinyl Simulator are included as the master effect.
The send amount can be adjusted for each track for mixing.

Specifications

Sampler
16bit - 12kHz or 24kHz (switchable) linear PCM sampling (mono)
12bit Sampler mode
Sampling up to 4 seconds per sample (12kHz) or 2 seconds per sample (24kHz)
Auto start sampling function with the input level (input level can be set)
Start/end point, attack, release, pitch, and level adjustment
Reverse playback
Sustain loop settings
Maximum polyphony: 10 voices
128 sample memory slots (16 x 8 banks)
Import and export of a slot or banks of samples (via MIDI)
*Import of audio files from PC/Mac is not supported.


10-note polyphonic mode
Mono mode with adjustable glide time
Legato mode with adjustable glide time
Arpeggiator modes (Up, Down, UpDown, DownUp, Up&Down, Down&Up, Up+1, Up+2, Down-1, Down-2, Random, Play Order)

Filter
Low Pass
High Pass
Band Pass
Each track has its own filter and envelope

LFO
Each track has one LFO which can affect both pitch and filter cutoff with separate adjustable levels
Adjustable LFO Shapes
Adjustable start time delay for each LFO

Sweep
Sweep with adjustable speed, range, and curve

Effects

Track effects

One effect per track
Chorus
Flanger
Tremolo
Delay
Distortion
Bit Crusher
Low Pass Filter
High Pass Filter
Isolator
Tilt EQ
Compressor

Master effects

Reverb send amount can be set independently for each track
Hall Reverb
Room Reverb
Arena Reverb
Plate Reverb
Tunnel Reverb
Infinity Reverb
Cassette Tape Simulator
Vinyl Simulator

Sequencer

4 tracks
Up to 64 steps per pattern
64 patterns
Step length can be set from 1/1 to 1/32
Real-time recording
Directly enter notes for each step when playback is on or off
Enter longer notes (Tied notes)
Metronome and pre-count function
Step copy and paste function
Track copy and paste function
Transpose function
Swing function
Pattern BPM / Global BPM can be set
Pattern chain function

Notes: Quantus Trajecta is a quad envelope designed with polyphony in mind. Quantus Trajecta's envelope structure takes the functionality from Noise Engineering's beloved Loquelic and Cursus Iteritas Percido modules, and adds even more control and mode options like Tremolo and ADSR.

Each parameter is CV controllable, and each control universally adjusts all four envelopes for easy polyphonic tracking. Quantus Trajecta is performable, musical, and most importantly, fun.

Notes: Jam Jam is a versatile and fun trigger-and-gate processor with four individually adjustable and CV-able channels. The three modes pack incredible functionality into the tiny 6hp package.

Random mode turns the module into four individually adjustable probability processors, great for adding variety to a patch.

In Clock Phase mode, the module adjusts incoming clock phase based on clock period. Use this to adjust sequencer timing or to create sequences that drift out of sync and then back in with CV.

Use Gate Delay mode as a simple trigger delay to help keep things in sync in your patch or for creative patching: dial in shifts in the timing of events from sub-millisecond adjustments to huge delays of over 15 seconds.

Jam Jam is a musical and fun utility sure to find a use in every patch.

Notes: Moog Music SR Series Cases feature generous padding around a semi-rigid A.B.S. shell, a rugged Ballistic Cordura outer that resists tears and abrasions, and laminated water-resistant zippers to offer on-the-go protection and safe storage for your instrument.

Multiple strap and handle configurations keep your commute comfortable, and multifunction pockets ensure you're organized on arrival.
Designed in conjunction with Subsequent 25
Rugged and road-ready semi-rigid A.B.S shell
Tear-resistant Ballistic Cordura outer
Water-resistant laminate zippers
Also fits Sub Phatty!