Search dance music

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


The Wave Transformer is a complex single oscillator with 7 audio outputs. Its method of wave shaping differs from other complex oscillators in that it is not based upon classic wave folding such as is common in West Coast synthesis, or filtration such as is common in East Coast synthesis.

This analogue, vintage-voiced, voltage-controlled oscillator features over 8 octaves of accurate pitch tracking. Its 7 simultaneous wave outputs include a unique Complex output. This strange and novel output varies between a simple waveform (triangle, unless you patch a signal into the Shape Insert jack) and a complex transformation of the harmonic structure of the original waveform. It contains a unique mixture of the fundamental frequency, odd order harmonics, even order harmonics and subharmonics. The Sub Octave panel control will determine whether the sub harmonics are derived from one octave down, two octaves down, or are muted altogether. It will vary from a simple waveform to a silhouette of your cat watching you as you react to a "present" that it left for you on the counter. No, seriously.

The module's Transform control morphs from a basic waveform through many strange iterations into a complex, gnarled mass of audio mutations at the Complex output using an asymmetrical multi differential audio transmutation circuit. You can yield countless variations on these permutations by combining this novel circuit with Hard Sync, Soft Sync, Linear FM and Exponential FM.

Additionally, you can mute the source waveform to use the circuit as a harmonic gate/VCA, rendering the Wave Transformer a voice unto itself.

If that is not enough, there is a Shape Insert that allows you to transform external oscillations and modular-level audio sources.

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


The 'Mega Milton' is a smorgasbord of handy all analogue utilities in just 8HP that will greatly extend the functionality of your Eurorack system.

It includes a stereo line input converter for incorporating line level external sources into a Eurorack system, a fixed 4 input mixer with breakout attenuator for combining signals, a gated slew limiter for adding slides to sequences, a sample and hold with analogue white noise with a myriad of uses such as generative melodies or producing percussive textures and finally a buffered mult for droop free signal distribution with handy LEDs to monitor.

All sections are normalised to help with typical use cases such as generating random CV from the sample & hold section, a smooth random source from the slew output and breaking out a standalone attenuator from the fourth mixer input.

The 'Mega Milton' provides essential classic synthesizer building blocks for patching in any Eurorack system.

Ideal For

Incorporating stereo external sources easily into your Eurorack system.
Signal attenuation and basic mixing in a small space.
Building percussion sounds from an analogue noise source.
Producing clocked random to add interest and variation to patterns and sounds.
Adding gated 303 style slides to patterns.
Creating and Manipulating patterns with Sample and Hold.
Buffering and monitoring voltage across multiple VCOs or other destinations with no drop.

Tech Specs

Supply: +12V 70mA / -12V 70mA
Size: 8HP
Depth: 32mm

Notes: ***B-STOCK: Box opened, product in perfect working order***


Top-of-the-range version of Sennheiser's consistently excellent HD25 headphones, bundled with a full range of accessories. One of our favourite models for DJ and studio use.

Supplier's notes:
The HD 25 PLUS is identical in design to the HD 25 but spoils its users with extra accessories and two included cables. Users can choose between a coiled steel cable (length: 3m/1m) and a straight, 1.5m steel cable.

The PLUS version also comes with a handy storage pouch and a second set of ear pads in a soft velour version.

Notes: Space-conscious lowpass filter and volume processor.

A combination of VCF + VCA + Mixer that lets you mix three different sound sources, and shape their tone, and levels in a breeze.

The Pony Filter is built around the SSI2144 FATKEYS Chip. Has the elegant sound of the classic transistor filter without the associated distortions, due to Dave Rossum's "improved ladder" topology.

Features

3 Channel Mixer (Out normalized to channel three for feedback)
Temperature-compensated Q and frequency.
Compensated Volume VS Resonance
2 Cuttof CV INs.
CV 1 Selectable routing Cut-Off or Cut-Off+VCA
Voltage controlled Q
Two Segment Peak Meter

Specifications

Four-pole, 24 dB/octave
Current needs: +12V=50mA, -12V=45mA
Width: 6 HP
Depth Assembled Version: 22mm
Depth DIY Kit Version: 40mm
Designed, kits prepared and assembled in Barcelona.

Notes: Excellent value here. Alto's portable speaker is designed to fill a room with just one unit, plus the option to link two units wirelessly for even bigger sound. Built-in battery gives up to 100 hours of playback from a single charge.

Supplier's Notes:
Uber FX MK2 is a powerful but portable battery powered PA system with Bluetooth technology. Its 5-speaker, 320-degree sound array is the perfect solution for delivering hours of clear, punchy sound from microphones, instruments, mobile devices and more. Uber FX MK2 is not just for musicians - it's also perfect for many other indoor and outdoor events including business meetings, training sessions, backyard parties and award/graduation ceremonies - and with up to 100 hours of charge, it doesn't matter whether you have access to AC power or not.

Powerful and Clear

The innovative 200W, 5-speaker system features an 8" Woofer, stereo tweeters and full-range side-firing drivers providing 320- of audience listening area. The side-firing speakers also make for excellent live performance monitoring. UBER FX MK2 features two input channels, each with its own independent volume control and 2-band EQ and digital effects, and there's an additional third 3.5mm aux input.

Fully Wireless

With Bluetooth 5.0, the Alto Uber FX MKII offers robust streaming, linking and control: You can stream from any device to Uber FX MK2, and wirelessly connect a second Uber FX MK2s to create a stereo PA system using your favourite music streaming app. The Alto Pro App for iOS and Android provides control of mixing functions wirelessly for convenient control from anywhere. The simple single screen mixer allows you to select a channel and control all parameters effortlessly,

Portable and Convenient

Uber FX MK2 is incredibly easy to transport with its telescoping handle and wheels; it also has a handy top storage compartment, side bottle opener and front panel lighting. There are also two USB charging ports to keep your devices topped up.

Portable battery-powered 200W speaker with 320 degree sound

320 Degree Sound
Innovative 200W, 5-speaker system fills the room
All day battery
100 hours of sound on a single charge
Easy to Transport
Less lifting with telescoping handle and wheels
Create your own Mix
Built-in 2-channel mic/line/instrument mixer with EQ and FX
Stream Music Effortlessly
Bluetooth 5.0 enabled streaming and control
Wireless Control
Alto Pro Control App on iOS and Android
Stereo Speaker Link
Expand to two speakers with Bluetooth Linking
Charge your Devices
Includes two USB charging ports
Set the Right Sound
Music and Live Performance EQ presets
Third Input
Additional 3.5mm aux input
Made for Events
Top storage compartment, side bottle opener and front lighting

Tech information

Output Power: 200 W

Charge Port: 5V, 1A

Mic Inputs 1-2
Connector: XLR / 1/4" TRS Combo Input Connector
Dynamic Range: 108 dB (A-weighted)
THD+N: <0.01%
Noise EIN: >-110 dB (A-weighted)
Maximum Input Level: +1.5 dBu
Gain Range: 50 dB
Frequency Response: 20 Hz - 20 kHz (+/- 0.1 dB)
Input Impedance: 600 O

Line Inputs 1-2
Connector: XLR / 1/4" TRS Combo Input Connector
Dynamic Range: 108 dB (A-weighted)
THD+N: <0.01%
Maximum Input Level: +16 dBu
Gain Range: 24 dB
Frequency Response: 20 Hz - 20 kHz (+/- 0.1 dB)
Input Impedance: 20 kO

Instrument Inputs 1-2
Connector: XLR / 1/4" TRS Combo Input Connector
Dynamic Range: 108 dB (A-weighted)
THD+N: <0.02%
Gain Range: 24 dB
Frequency Response: 20 Hz - 20 kHz (+/- 0.1 dB)
Maximum Input Level: +6 dBu
Input Impedance: 1 mO

Channel EQ
EQ Configuration: Channels 1 and 2 have independent 2-band shelving EQs
High EQ Filter Type: 12 dB/octave shelving filter
High EQ Cutoff Frequency: 12 kHz
High EQ Gain/Attenuation: +/-15 dB
Low EQ Filter Type: 12 dB/octave shelving filter
Low EQ Cutoff Frequency: 80 Hz
Low EQ Gain/Attenuation: +/-15 dB

Aux Inputs
Connector: 1/8" (3.5 mm) TRS Input Connector
Frequency Response: 20 Hz - 20 kHz (+/- 0.1 dB)
Maximum Input Level: +12 dBu
Input Impedance: 20 kO

Line Output
Connector: 1/4" (6.35 mm) TRS Output Connector
Frequency Response: 20 Hz - 20 kHz (+/- 0.1 dB)
Output Level: Fixed +10 dBu
Input Impedance (unbalanced): 100 O

Amp/Drivers
Frequency Response: 60 Hz - 20 kHz
Max SPL: 110 dB
Power Amp: 100 W RMS mono-bridged
LF Driver: 8.0" 203 mm woofer
HF Drivers: (2) 1.0" / 25 mm tweeters
Side Drivers: (2) 3.0" / 76 mm drivers

Bluetooth Specifications
Profile: A2DP, AVRCP
Version: 5.0
Frequency: 2402 - 2480 MHz
Range: Up to 100 feet / 30.5 meters*

Battery
Type: lead-acid battery
Capacity: 12V, 7A, 84 Wh
Life: Up to 100 hours
Charging Time: 10 hours

USB-A Charging
Front USB Port: 5V, 1A
Top USB Port: 5V, 2.2A

Power
Connection: IEC
Voltage: 100-240 VAC, 50/60 Hz, 120 W

Dimensions (height x width x depth):
19.4" x 10.4" x 15.1" / 493 x 383.6 x 266.6 mm
Weight: 22.9 lbs. / 10.4 kg

Notes: CV Random is a random CV generator with 4 types of randomness and a triggerable sample-and-hold function.

Sliders allow you to set the internal clock tempo (RATE), shape the probability of triggering (PROB), blend old with new values (RND) and set the shape of all four random outputs (SHAPE).

4 different sliders

RATE

Sets the tempo of the internal clock. The CV input below the slider adjusts the clock rate, with 1V/oct calibration when the CV attenuverter is 100%. Upon each clock trigger, the RATE slider light blinks, and there is a chance for the internal random source to generate a new value.

PROB

This probability is set by the PROB slider, and if a new value was generated, the PROB slider light blinks and a pulse is emitted from the TRIG output.

RND

When the internal random source generates a new value, it mixes the previous value with a random value, with an amount specified by the RND slider.

SHAPE

The SHAPE slider sets the shape of all four random outputs. At its lowest position (0%), all outputs immediately jump to the new random value (the target value) when the clock is triggered.

At non-zero positions, the outputs interpolate between the previous and the target value, using a different behaviour for each output.

Internal random clock source

Whenever the clock activates, the RATE slider's light flashes. At the same time, there's a chance that the internal random source will create a new value, depending on the PROB slider's setting.

If it does create a new value, the PROB slider's light flashes too, and a pulse comes out of the TRIG output.

External IN & TRIG inputs

If the TRIG input is patched, the RATE slider is ignored, and the internal clock is only triggered when an external trigger is received. The PROB slider is used to filter this trigger by applying some probability.

Self-modulation

Thanks to a switch in the back of the module, you can normalize the LIN output to the 4 CV inputs and adjust the amount of modulation for each parameter with the attenuverters.

This adds another layer of randomness to your results, enabling more dynamic and unpredictable outcomes.

SHAPE Outputs

The STEP output jumps to the new value in one step at 0% SHAPE, and divides the transition into 16 steps at 100% SHAPE.

The LIN output immediately reaches the new value at 0% SHAPE, and takes the whole clock cycle to do so at 100% SHAPE, staying constant in between.

The EXP output shifts exponentially, becoming linear at 100% SHAPE, with its pace adjusted by the SHAPE slider.

The SMTH output transitions smoothly, with the speed controlled by the SHAPE setting, holding at the target until the cycle ends.

Specifications

Dimensions 10HP - 50×128,5mm
Current 63 mA +12V / 11 mA -12V / 0 mA +5V
Input & Output Signals +/-10V
Impedance Input 10k - Output 10k
Materials PCB and Panel - FR4 1,6mm
Depth 40mm including connectors (Skiff friendly)

Notes: Two channel expander for Bartender

Mixer section

Each channel has the following:

Stereo or mono - Each channel can be treated as a stereo channel or a mono channel with two summed inputs.

CV inputs for both panning and level control

Two send buses - You can route each channel to one of two send buses. Each send bus is stereo. You can choose if you want the send to come before or after the level/panning controls.

Mute - The mute has both latching mute (up) and a momentary mute (down). The mute uses a capacitor to slow the turn off and on of the mute action. So it is mostly click-less, but you may find an occasional pop.

Cue bus - You can route each channel to the cue bus.

Expandable Mixer Series

Bartenders can be cascaded to create 8ch, 12ch, or 16ch mixer. The main level is what is sent the main level control can act as a group control.

Barbacks can be added to add 2ch to your mix. Barbacks can also be cascaded enabling up to a 16ch mixer configuration.

Send-VCA can be added for CV control of the level of the send.

DVCA, Cast Iron, Mingles, and USB-2CH can all be connected with Dupont cables (aka female to female breadboard cables) via pin headers on the back of the modules. Connecting the in and out pins will send/receive the audio into the next module.

Width: 10hp
12V: 125mA
-12V: 100mA

Notes: Lush analogue EQ switchable between tilt and Baxandall high-shelf configurations.

Perform a variety of mixing and sound design duties ranging from subtle brightness and clarity adjustments to low-end rumble removal, boosted low-pass filtering and sweep EQ.

In the default tilt mode, turning the control knob clockwise simultaneously boosts treble and cuts bass. Turning anti-clockwise boosts bass and cuts treble. These boosts and cuts are pivoted around the mid-range. With the control knob at 12 o'clock the frequency response is neutral.

With Baxandall high-shelf mode enabled, turning the control knob clockwise past 12 o'clock introduces and gentle high-shelf EQ weighted around the upper mid-range. Turning the control knob anti-clockwise results in a wide high-shelf cut with subtle bass and mid-range adjustments.

Patching the channels in series allows for radical sound shaping and band-pass responses. Each channel provides up to +/- 8db of low and high-frequency gain control, summing into a low noise output stage. Hot input signals over 15vpp are saturated by active Zener diode clipping.

Features

Precise voltage control of EQ tilt and shelf
Seamless switching between EQ modes
High-quality components used throughout

Specifications

Intellijel 1U format
Width 18HP
Depth 32mm
Power requirements ~60mA +12V/~58mA -12V
Control voltage range 0-8V
Impedance Input 100K / Output 1K

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


More bang for your buck? Omnitronic's four-channel offering is a competitively priced alternative to entry-level mixers from Pioneer or A&H. Built-in mp3 playback from USBs and audio streaming over Bluetooth.

Supplier notes:
- 4 input channels with gain control, LED level meter, 3-band equalizer, cue button and channel fader
- DJ microphone channel with level control, 2-band equalizer, on/off and talkover switch
- Integrated Bluetooth audio streaming for your smartphones and tablets
- MP3 player with USB port and blue LCD screen
- Pre-fader listening to all input channels and the master output via adjustable stereo headphones output
- Crossfader with assignment switches and adjustable curve
- Master channel with level and balance control
- 10-digit stereo LED level meter
- Adjustable monitor output (DJ booth)
- 10 line and 2 phono inputs via RCA jacks
- Balanced XLR and RCA outputs
- Record output, independent of the master

Review: ***B-STOCK: Box slightly torn and creased, but content in perfect condition***


Steely Dan are the kind of band where everyone has their favourite album, with a fanbase who might well get a little heated debating which phase of the band is superior. But when it comes down to it, everyone will agree Aja is their masterpiece, where that exacting studio process and the elevated songwriting hit some magical sweet spot that yielded the semi-mythical perfect album. The grooves are so slinky as 'Black Cow' opens the record up, they spring with joy out of 'Peg' and they lock down heavy on 'Josie', and there's so much more in between. This faithful reproduction from Analogue Productions is a limited audiophile edition for a band who were made for audiophiles.

Notes: Lush analogue EQ switchable between tilt and Baxandall high-shelf configurations.

Perform a variety of mixing and sound design duties ranging from subtle brightness and clarity adjustments to low-end rumble removal, boosted low-pass filtering and sweep EQ.

In the default tilt mode, turning the control knob clockwise simultaneously boosts treble and cuts bass. Turning anti-clockwise boosts bass and cuts treble. These boosts and cuts are pivoted around the mid-range. With the control knob at 12 o'clock the frequency response is neutral.

With Baxandall high-shelf mode enabled, turning the control knob clockwise past 12 o'clock introduces and gentle high-shelf EQ weighted around the upper mid-range. Turning the control knob anti-clockwise results in a wide high-shelf cut with subtle bass and mid-range adjustments.

Patching the channels in series allows for radical sound shaping and band-pass responses. Each channel provides up to +/- 8db of low and high-frequency gain control, summing into a low noise output stage. Hot input signals over 15vpp are saturated by active Zener diode clipping.

Features

Precise voltage control of EQ tilt and shelf
Seamless switching between EQ modes
High-quality components used throughout

Specifications

Intellijel 1U format
Width: 18HP
Depth: 32mm
Power requirements: ~60mA +12V/~58mA -12V
Control voltage range: 0-8V
Impedance Input: 100K / Output 1K

Notes: Zeus Guitar Pedal Power Supply

NU-X have built an enviable reputation as guitar pedal experts and great guitar sound starts with the power source. Using standard 9Vdc power adaptors usually releases unwanted noise into the signal chain and unstable power can adversely affect the operation and even life expectancy of some boutique pedals. Zeus is an extremely low noise, high current power supply designed specifically for audio effect circuits with 6 fully isolated 9V outlets, 3 switchable 9/12/18V outlets and a fully variable 6-12V outlet. This lightweight and efficient power supply has the flexibility and reliability to run a full pedal board, even with multi-effect units added, with problem-free operation.

Extremely low noise circuitry
Fully isolated outputs
Multiple voltage options
High current capacity
Supplied with various DC link cables to havndle most pedal input types
Supplied with a 2-outlet combiner lead with 2.5mm DC plug for higher power units.

Power supply: 100-240Vac, 50/60Hz (IEC)
Outputs: 6 x 9VDC, 3 x 9/12/18vDC, 1 x 6-12Vdc variable (all DC5521 jack)
USB output current: 1.5A (Type-A outlet)
Dimensions: 195 x 101 x 42mm
Weight: 658g

In the box

The box for this item contains :

Zeus guitar pedal power supply
5 x DC jack link cables (5.5x2.1mm) straight to angle 0.5m
5 x DC jack link cables (5.5x2.1mm) straight to angle 0.3m
1 x DC jack reverse polarity cable (5.5x2.1mm) straight to angle 0.5m
1 x DC jack (5.5x2.1mm) to 3.5mm plug cable 0.5m
1 x twin DC jack (5.5x2.1mm) socket to single DC plug (5.5x2.5mm)
1 x IEC power lead

Notes: Dual three channel voltage controlled panning mixer

Mixer section

Channel 1 and Channel 2 are three channel mixers with potentiometers to control level of three different inputs for each channel. Each channel then has a potentiometer to control panning as well as CV control for panning and level control

Panning and VCA

The VC panners are equal loudness panning and the VCAs for each channel are linear response.

Built-in LFO

There is a built-in LFO that is normalled to the panning CV input of each channel. CH1 gets the standard LFO and CH2 gets an inverse, enabling alternating channel panning. The default is to use a TRI wave for the LFO, but there is a jumper on the back to switch it to SQU.

Width: 12hp
12V: 140mA
-12V: 120mA