Search dance music

Notes: The Hungry Robot Sample & Hold provides basic S&H functionality with some added bells and whistles. It uses an internal clock dialed into a very useful range. If the internal clock rate is not to your liking, you can bypass the Rate knob by patching a clock signal into Clk In. The Sample & Hold has a built in attenuverter giving a bit of added control over the random voltages that are outputted. White noise out for uses elsewhere. Traditionally a S&H samples voltages from chaotic white noise, but E.In allows you to bypass the white noise and patch in your own sample source (i.e. patching an LFO in for a bit crushed LFO). As with all Hungry Robot "Modular Boxes" the Sample & Hold can be powered with a simple 9V DC, Negative Center power supply.

KNOBS
-MINUS/PLUS: Attenuverter for output. Allows you to sweep between positive and negative voltage outputs.
-RATE: On board clock source ranging from approximately 25ms to 1000ms.

PATCH POINTS
-E.IN: Bypasses internal white noise as a sample source. Patch in any CV source that you want to sample from
-STATIC: Taps into white noise output (0-5V range)
-CLK IN: Bypasses internal clock with your provided external clock
-S&H OUT: Two buffered outputs of S&H voltage

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel

Notes: Lovely little mono filter module in a compact desktop format. Based on the classic Prophet 5 filter, ideal for processing synths and signals, hooking up to Eurorack or other Hungry Robot modules.

Supplier's Notes:

The Hungry Robot VCF is an all analog, 4-pole low pass filter with a self-oscillating resonance control. It is a close replication of the filter circuit found on the famous Prophet 5. It uses a HM2040 which is a high quality, faithful replication of the original SSM2040 chip. This resonant filter has a beautiful tonal quality. The over-sized knobs provide a satisfying tactile response. The cutoff frequency can be controlled by external control voltage. It has a built-in attenuator and invert switch for the incoming CV. CV input does not track at 1V/Oct, but is scaled to act as a VCA when a 5V signal is applied to CV input. As with all Hungry Robot "Modular Boxes" the VCF can be powered by a simple 9V DC, Negative Center power supply.

KNOBS
-FREQUENCY: Sweeps the cutoff frequency of the filter.
-CV: Attenuator for incoming CV input.
-RESONANCE: Sets resonance of filter. Small volume drop is to be expected. Will self-oscillate at higher settings.

SWITCHES
-INVERT: Inverts the incoming CV input. Toggle to the right to invert incoming CV

PATCH POINTS
-IN: Patch Audio Signal In
-CV: CV input for Frequency. Allows for CV control of this parameter.
-OUT: Patch Audio Signal Out

Dimensions: 4.7" x 2.6" x 1.5"
Power: 9V DC - Negative Center - 2.1mm Barrel

Notes: Introducing iRig Mic Studio, IK Multimedia's ultra-portable large-diaphragm digital condenser microphone for iPhone, iPad, iPod touch, Mac, PC and Android. It packs a 1" diameter condenser capsule into an ultra-compact enclosure that can be used to make professional-quality recordings anywhere. Great for musicians, vocalists, home producers, podcasters, broadcasters, voice-over artists and more, it puts the superior power of a large-diaphragm microphone into the palm of your hand.

What's remarkable about iRig Mic Studio is that it offers its truly amazing recording quality in an enclosure that's smaller than an iPhone. It features a large 1" diameter back electret condenser capsule, a 24-bit audiophile-grade A/D converter (with 44.1/48 kHz sample rate) and a built-in low-noise high-definition preamp. These, combined with its 133dB SPL rating, allow for optimal recording at any sound pressure level - it can capture everything from the subtle and nuanced dynamics of the human voice to the full-on bombast of an amplified electric guitar, and everything in between.

To ensure you'll always record at your best, iRig Mic Studio comes with a full set of flexible controls: It has a gain control knob and a multicolor LED level indicator. It also includes a headphone output with its own level control for onboard monitoring directly from iRig Mic Studio itself. And, for better positioning while recording, iRig Mic Studio comes with a sturdy and portable tabletop tripod stand.

All this is to say that iRig Mic Studio is equipped with everything you need to capture the highest quality sound no matter whether you're at home in the studio or recording while on the go.

iRig Mic Studio is compatible with all your favorite mobile and desktop platforms. It comes with a female micro-USB port and an assortment of cables: Micro-USB to Lightning for iPhone, iPad and iPod touch; micro-USB to micro-USB OTG for Android (requires either an Android 5 or Samsung Professional Audio device); and micro-USB to USB for Mac and PC. A micro-USB to 30-pin cable is available separately for older iPhone, iPad and iPod touch models.

For immediate recording, iRig Mic Studio comes equipped with a powerful suite of vocal apps that match its cross-platform compatibility. iPhone, iPad and iPod touch users will be able to enjoy VocaLive, a powerful effects processor and multi-track recording app that features a selection of 12 professional real-time vocal effects. EZ Voice for iPhone, iPad and iPod touch and EZ Voice for Android are streamlined and easy-to-use sing-along apps that make it easy for vocalists to practice with any song in their music library. iRig Recorder for iPhone, iPad and iPod touch and iRig Recorder for Android are straightforward apps for field recording, podcasting, note taking and more.

iRig Mic Studio is also fully compatible with a wide variety of third party apps and software, like Cubasis, ProStudio Vocal FX, MultiTrack DAW and more. It's also compatible with Apple's GarageBand and Logic Pro X apps, and iOS Voice Memo.

Notes: iRig Stream Mic Pro

Compact multi-pattern microphone and stereo audio interface

iRig Stream Mic Pro it makes easier than ever to share your voice and music. It combines a professional multi-pattern condenser microphone and 24-bit, 96 kHz audio interface for iPhone, iPad, Android, Mac and PC into a single ultra-portable solution for music and content creation.

iRig Stream Mic Pro overview

Condenser microphone/audio interface for iPhone, iPad, Android, Mac/PC

Gold-sputtered 1/2" electret condenser capsule for pristine sound

Switchable cardioid, omnidirectional, figure-eight and stereo polar patterns
Adjustable high-pass filter to eliminate rumble and noise
3.5 mm stereo input for keyboards, mixers, drum machines and more
Stereo/multichannel modes: mix mic and line signals or keep separate
Loopback+ to add background music or process your voice all on a single device
Direct monitoring to check your sound before going live
Elegant all-in-one control knob for easy adjustments mid-stream ? Works with all your favourite apps

Pristine multi-pattern condenser microphone

First, make your voice heard with selectable cardioid, figure 8, omnidirectional or stereo pickup patterns. These patterns range from noise-rejecting to immersive audio, so whether you're recording a podcast, interview, instrument or ensemble, you'll enjoy crisp, clear and detailed signal with easily adjustable gain.

Integrated audio interface
Next, connect media players, keyboards, mixers, turntables, soundboards and more with the convenient 3.5mm audio input right on the mic. With its monitoring mix control you can blend the direct or recorded audio via the headphone output. Now you can keep your entire setup in one elegant, compact design you can easily take anywhere, and that connects to any device right out of the box.

Pro results with Loopback+ iRig Stream Mic Pro offers IK's ground-breaking Loopback+, letting you not only add music from your phone or tablet to your recording or stream, but even lets you route the mic signal into a separate app to add reverb, EQ or noise reduction (like the included MixBox CS for iPad) before sending to a second app like Instagram or Tiktok. It's an easy way to get massive sound on apps that don't normally let you process audio or add background music.

Connections/controls

Multi-function knob allows you to: - select the polar pattern - set on or off the high-pass-filter - mute the microphone signal - control the microphone gain - control the headphones level - control the streaming level - set on or off the direct monitor or the loopback.

1/8" headphones output
1/8" stereo line input: DC barrel to charge connected iOS device
Mini-DIN connector

Serious sound quality
iRig Stream Mic Pro delivers serious sound throughout, too. A headphone output with direct monitoring lets you check levels with any app, before you even hit record. And 24-bit, 96 kHz converters ensure pristine, detailed sound for both the mic and aux input.

Simple, live-optimized controls
All the features are controlled via a single, intuitive and live-optimized control knob, so it's easy to tweak on the fly without taking your eyes off the camera. Click through each setting quickly to make adjustments, and even hold down to mute if you need to cough or sneeze.
And easy-to-see LED level indicators mean you're not tied down by headphones if you want to record at a distance.

Specs

Common

Interface type: 2 in/2 out or 4 in/2 out
Conversion: 24-bit A/D, 24-bit D/A
Sampling rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Power: USB bus powered. When connected to an external PSU (iRig PSU 3A, not included), iRig Stream Mic Pro charges the connected iOS lightning device.
Device connection: mini-DIN
Dimensions: 55 mm/2.16" x 136 mm/5.35" x 38 mm/1.5"
Weight: 430 g/15.17 oz

Microphone
Microphone type: condenser, electret
Capsules: dual 0.55" gold-sputtered
Polar patterns: cardioid, omni, figure-8, stereo
Frequency response: from 20 Hz to 20 kHz
Maximum sound pressure: 115 dB SPL
High-pass filter: selectable between 60, 100 and 200 Hz

Headphone Output

Connector: 1/8" (3.5mm) TRS jack
Frequency response: from 20 Hz to 20 kHz
Output level: 7 mW/channel (32 Ohm load)
Dynamic range: 87 dB(A)

Aux Input

Connector: 1/8" (3.5 mm) TRS jack
Nominal input level: -10 dBV
Frequency response: from 10 Hz to 20 kHz

Package includes

iRig Stream Mic Pro
Table stand
mini-DIN to iOS Lightning cable - 60 cm/23.62"
mini-DIN to USB-C cable - 150 cm/62.99"
5/8" to 1/4" thread adapter

Box content

TONEX Pedal
Power supply
USB Cable

Notes: Connect your music with the world

The first audio interface designed for sharing

Today's mobile devices make it easier than ever to share your music with the world. From Instagram live-streams to YouTube videos, SoundCloud playlists and more, social media and smartphones have become a key aspect of how many musicians get heard and connect with fans.

iRig Stream makes it easier than ever to share, letting you connect instruments, mixers and more to your iPhone, iPad, Android device and Mac/PC, with convenient features designed just for use on today's most popular platforms. Whether it's mono or stereo, live playing or an existing mix, iRig Stream gets you connected to all your favourite apps, so you can start connecting with listeners instantly.

Features

Stereo line input over RCA connectors
Audio level LED indicators to dial in the right gain fast
Up to 48kHz / 24bit resolution for crystal clear sound
Pre-mixes audio sources down to stereo or mono
Loop-back mixes incoming signals with your device's audio
Headphone out with integrated mic input to talk over your music
Powered by your device for use on the go
Works with all your favourite apps
Custom ASIO driver for superior performance on Windows machines

Mix and stream up to 3 audio sources

iRig Stream makes it easy to connect all your audio sources and route them to a streaming or recording app. Send the digital output of your smartphone, tablet or laptop into iRig Stream, mix it with external audio sources like mixers, DJ decks, keyboards and more. Add your voice from earbuds (or an iRig Mic) and send all 3 signals back to your device to popular apps like Instagram, or just your built-in camera app.

Get connected

iRig Stream makes it easier than ever to connect. With USB, USB-C and Lightning cables right in the box, it plugs into all the latest iPhones, iPads, and Android devices, as well as Mac & PC - even the latest devices.

2 line-level RCA inputs are perfect to connect DJ and multi-channel mixers, but are also great for keyboards, synth & drum machine setups, and more. Whether you're looking to stream your DJ set, record band practice, jam along with your favourite song, or even host a podcast, iRig Stream lets you connect a massive range of gear.

Sound your best

iRig Stream offers 24-bit, 48 kHz A/D and D/A converters to ensure a clean, professional signal regardless of the platform you'll wind up on. And adjustable input gain and easy-to-read level indicators let you dial in the right sound level instantly.

Make your voice heard

iRig Stream offers a unique headphone / microphone jack, wired just like your smartphone, so you can listen and talk over the stereo input simultaneously.

The mic input is mixed into the stereo inputs, to ensure it works with any app, and offers adjustable volume. Best of all, it works with most headphones with a built-in mic*, and also with IK products like iRig Mic Lav, iRig Mic, and iRig Pre, giving you a wide range of options for any situation.

Designed for apps

If you're ever tried streaming or sharing audio on social media, you know many apps only support mono signals - so iRig Stream offers a mono/stereo switch to compensate. Stereo passes both inputs as left & right channels, and mono mixes them together to a single channel, ensuring you won't lose anything panned to one side.

Comprehensive compatibility

iRig Stream works with any app that records or streams audio or video, so you'll never stop finding new ways to use it. To get you started, it includes iRig Recorder 3 LE (iPhone/iPad/Android) - an easy-to-use, high quality audio and video recording app. Record, trim, edit and share,
right from your device.

Built to go and to last
iRig Stream is compact enough to slip into the pocket of your backpack, so it's ideal for use on the go. It runs off your device's battery, so there's no batteries to run out mid-show, but can also charge your device with an optional power supply, to keep you going for extended sessions.

Specs

Common
Conversion: 24-bit A/D, 24-bit D/A
Sampling Rate: 44.1 kHz, 48 kHz
Power: USB bus powered or DC IN. When connected to an external PSU (iRig PSU 3A, not included), iRig Stream charge the connected iOS lightning device.
Metering: 3x LEDs
Device Connection: mini-DIN

Line input
Connector: 2x RCA (unbal.) Left/Right
Nominal Input Level: -10dBV
Input Impedance: 16.5kOhms
Frequency Response: 20 Hz - 20kHz

Headset/Phones
Connector: 1/8" TRRS jack (CTIA wiring standard)
Supply voltage: > 2,5V
Microphone gain: Adjustable with numbered thumbwheel
Frequency Response: 20 Hz - 20kHz
Headphone Level control: numbered thumbwheel
Headphone Output Power: 100mW into 50Ohms

Package includes
iRig Stream interface
Lightning to mini-DIN connection cable with charging features (60cm/23.62")
USB C-Type to mini-DIN connection cable (60cm/23.62")
USB A-Type to mini-DIN connection cable (60cm/23.62")

Dimensions
Size: 105.5mm/4.15" x 44.5mm/1.75" x 24mm/0.94"
Weight: 65g/2.29oz

Compatibility

iOS Devices

Made for: iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPad Pro 10.5-inch, iPad Pro 12.9-inch (2nd generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad (6th generation), iPad (5th generation).
Also compatible with all newer iPhone, iPad and iPod touch models.

Computers
Macr: macOSr 10.6 or later. One free USB port.
Windowsr: Windows 10 or later. One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed. Download the iRig ASIO driver here.

Android Devices
Compatible with Android devices running Android 5 or later and with USB digital audio capabilities. Micro-USB-OTG mini-DIN cable (sold separately) is required.

Notes: Sound your best anywhere

A great interface is the one that's always there for you. iRig HD X is the new flagship of the iRig guitar interface family, bringing breathtaking sound quality and even more advanced features to guitarists everywhere. Compact enough to store in your gig bag, iRig HD X lets you connect anytime with inspiring new ways to play and sound amazing.

Practice with popular learning apps or favorite songs. Browse and discover thousands of new tones on ToneNET. Record ideas wherever inspiration strikes. Stream videos of you jamming to backing tracks. Warm up before gigs with all your favorite tones. No matter where you are on your musical journey, with iRig HD X the possibilities are endless.

Your new mobile dream rig

iRig HD X + TONEX and AmpliTube for iPhone and iPad gives you an incredibly versatile mobile rig with 2 powerful ways to find your sound: TONEX using IK's AI Machine Modeling technology, and AmpliTube offering the ultimate tone processing and recording studio. Play, practice and record on your mobile device with the most authentic and hyper-realistic gear models ever made.

Ultra-compact, high-quality audio

iRig HD X features a whisper quiet and transparent instrument preamp with wide frequency response and dynamic range that ensures every nuance of your playing is accurately translated while preserving the true tone of your instrument. The Headphone Out and Amp Out are equally high end offering exceptional sound quality in a device this portable.

One knob to do it all

iRig HD X sports an all-new enclosure featuring a LED ring input level indicator that also doubles as an ultra-fast and precise tuner for the connected instrument. Its ergonomic, multi-function knob lets users quickly adjust headphone level, loopback functions, direct monitoring and the tuner.

Reach your guitar goals faster

Practicing should be fun. With iRig HD X you'll be inspired by professional guitar tone while you learn. From anywhere, easily connect to the most popular learning apps while playing through the best amp models. Use the included TONEX and AmpliTube apps to load one of your go-to tones then launch your preferred app to study music, tabs or the original song. It's that easy!

Discover the best tones online

iRig HD X comes with AmpliTube 5 SE with 80 models covering all the "must have" gear. You also get TONEX SE for Mac/PC and iOS, which includes 200 Premium Tone Models plus unlimited user Tone Model downloads from ToneNET. You can browse, demo and download new guitar and bass tones within TONEX or build the ultimate guitar rig with AmpliTube 5.

Have fun playing along

Imagine finding perfect guitar tones from ToneNET for songs you love. Got a few minutes to play? Just plug-in and open up AmpliTube or TONEX and start jamming with incredible tone. No need to plug in a pedalboard or out-board gear. Play along with backing tracks on YouTube or from your music library or streaming service. Staying inspired has never been this easy.

Jamming and performing with friends

With iRig HD X it's easy. No more lugging a pedalboard to rehearsal spaces. All you need is right in your gig bag. Just show up and connect the Amp Out jack to an external amplifier or powered monitor. Everyone will be amazed by your tone as you load favorite AmpliTube presets or TONEX Tone Models from your iOS device (or laptop).

Recording audio tracks

iRig HD X is recognized by all desktop and iOS recording apps. TONEX and AmpliTube for Mac/PC work standalone or as plug-ins inside your favourite DAW so it's easy to record a DI or a processed guitar part. You can use the Loopback+ feature of iRig HD X (which acts like a virtual FX loop) to route your guitar signal first to TONEX or AmpliTube and then into your recording app.

Recording and streaming Video

The same feature that lets you record processed audio on your mobile device also lets you record or stream video with your amazing guitar tones sounding crystal clear. Use the Loopback+ feature of iRig HD X to route your guitar signal first to TONEX or AmpliTube and then into the video recording App on your iPhone or your streaming App of choice. You fans will love how great you sound.

With more ways to connect on more devices and with all your favourite apps, iRig HD X is your all-access pass to limitless musical experiences.

Ideal for all players

Whatever your level and style of music, iRig HD X will keep you connected to the newest and best tools for sounding great, learning new songs, advancing as a player and sharing the music you make with others. Sound better, play more and improve faster throughout a lifetime of guitar with iRig HD X.

Specifications

Common
AD and DA resolution: 24-bit
Sampling rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
Host connection: USB Type-C socket

Instrument Input
Input impedance:1 MOhms
Maximum input level: +9 dBu
Frequency response: From 20 Hz to 20 kHz within 3 dB (96 kHz sample rate)
Dynamic range: 115 dB(A)

Amp Output
Configuration: Unbalanced
Output impedance: 3.3 kOhms
Output level: 0 dBFS corresponds to -2 dBu
Frequency response: From 15 Hz to 40 kHz within 1 dB (96 kHz sample rate)
Dynamic range: 97 dB(A)

Headphone Output
Output impedance: 22 Ohms
Maximum output level: approx.. 8 mW into 32 Ohms load
Frequency response: From 15 Hz to 40 kHz within 1 dB (96 kHz sample rate)
Dynamic range: 95 dB(A)

Package includes
iRig HD X interface
USB-C to USB-C cable (60 cm/23.62")
USB-C to Lightning cable (60 cm/23.62")

Dimensions
Size: 99 mm/5.35" x 42 mm/2.27" x 25 mm/1.35"
Weight: 54 g/1.9 oz.

Compatibility

iOS Devices
Made for: iPhone 14 Pro Max, iPhone 14 Pro, iPhone 14 Plus, iPhone 14, iPhone SE (2nd and 3rd generation), iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, iPhone 13 mini, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini, iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPad Air (3rd, 4th and 5th generation), iPad (9th generation), iPad mini (5th and 6th generation), iPad Pro 12.9-inch (1st, 2nd, 3rd, 4th and 5th generation), iPad Pro 11-inch (2nd and 3rd generation), iPad (8th generation), iPad Pro 11-inch, iPad Pro 10.5-inch, iPad Pro 9.7-inch, iPad Air 2, iPad Air, iPad mini 4, iPad mini 3, iPad mini 2, iPad (5th, 6th and 7th generation), iPod touch (6th and 7th generation).
Also compatible with all newer iPhone, iPad and iPod touch models.

Computers
Macr: macOS 10.6 or later. One free USB port.
Windowsr: Windows 10 or later. One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed.

Review: Music Message & The Moment has been put together to celebrate 60 years of Impulse Records. All the big hitters like John Coltrane, Quincy Jones, Charles Mingus, Oliver Nelson, Pharaoh Sanders, Archie Shepp and a host of other legendary jazz cats all feature. Each of them contributed to Impulse's reputation as the leading, political stand-taking label of the 60s. Togeterh they add up to a strong statement of black power, and musically the compilation take sin a wide embrace of styles and sounds. The stunning four LP box set is housed in a high-quality archival portfolio cast with a museum drop front, and it also comes with a booklet and unique slipmat, so is a real piece of collector's gold.

Notes: This is the version II of the original uVCA.

This module was adapted from a design by David G. Dixon

Notes: Outs enables your modular system to output both professional and prosumer compliant audio, and send it to external amplifiers, mixers, recording devices, or DAW interfaces. Using the L+R Level knob, it scales modular-level voltages down to the level required to drive external gear at either the +4dBu balanced professional line-level standard or the -10 dbV unbalanced standard.

Headphone monitoring is also provided via a low noise built-in headphone amp (with its own independent level control), capable of driving a wide range of impedances - from studio grade headphones to portable style earbuds.

To use Outs, simply connect the final output of your patch to the 1/8" inputs (where the built-in activity LEDs light up to indicate the presence and intensity of the input signal). The left input is normalled to the right, so you can create a stereo signal from a mono source. Or if you have an Intellijel Mixup, you can remove a jumper from its rear panel, and connect it to the Outs module using the 3-pin link cable included with the Mixup.

Notes: Triplatt is a three-channel active/buffered attenuverter and summing mixer. Each channel has a knob, which can function as a unipolar attenuator or a bipolar attenuverter, depending on the setting of its corresponding two-position polarity switch.

Each input is normalled to a built-in precision +5V DC voltage source. With nothing plugged into the jacks, each knob controls a voltage range of 0 to +5 V or -5 to +5 V depending on the position of the channel polarity switch. Outputs A and B are also capable of a range of 0-10 / -10 to +10 when using the special function switches.

Each output is normalled to mix into the output of the channel below, making it possible to do sub mixes in groups of two or three.

In addition, each channel has a "special function" switch to alter its input voltage in a specific way. Channel A has a 2x voltage multiplier switch, allowing you to double the voltage sent into Channel A. Channel B has a +5V switch, allowing you to add 5V to whatever voltage is sent into Channel B. Channel C has a mute switch, allowing you to completely turn off the signal being sent into Channel C.

Notes: Noise Random Tools comprises a collection of useful utility blocks that you could use in many of your patches - Clock, Random Pulse, Analog Noise, Sample and Hold, and Slew.

Features:

- Clock and Random pulse source with adjustable rate
- Analog pink and white noise source with very accurate spectrum
- Analog sample / track and hold with very low droop
- Analog slew with adjustable slew rate

Notes: Sometimes your ears are not enough and you really need to see the sounds and control voltages you are generating. Zeroscope's two channel design lets you display and compare both control voltages and audio. It's a good old fashioned sci-fi light show!

The Zeroscope 1U is an adaptation of the excellent 3U Zeroscope by VPME.DE.

Three Modes Packed Into 1U:

- Scope: Standard graphical display, with time displayed on the X-axis and voltage displayed on the Y-axis.
- X-Y: Alternate graphical display with CH 1 driving the X-axis and CH 2 driving the Y-axis.
- Tune: Alphanumerical tuning display, which you can configure to show either Hz values or note names.

The Scope displays have adjustable display offset for each channel and an adjustable trigger threshold, while the tuner has options for reference pitch and average update speed.
Ins & Outs

The inputs are DC coupled and accept signals between -10V and +10V. The Signal on the input is normalled to the output below; this allows you to monitor or tune a signal without a mult or re-patching.

Notes: Mighty oscillations, mini size.

An analog oscillator and LFO with pure waveforms and precise tracking in a compact package. Perfect as a utility modulation source but equally capable to be used as a primary sound source. Patch it up and let it rip!

Features
Four simultaneous pure waveforms: Sine, Triangle, Square and Sawtooth
Pitch input for 1V/Oct tracking and FM
SYNC input for Hard Sync. This input has a comparator so that you can use a variety of waveforms as triggers.
Switch to select VCO (audio) or LFO range of operation
Three position Octave switch to jump pitch up or down by two octaves
PITCH knob has three octave range in VCO mode (extended to seven with the octave switch) and seven octave range in LFO mode (extended to 11 with the octave switch).
Bicolor led indicates the state of the triangle core rate

Specs
Width 14HP
Depth 37.5mm
Power 19mA @ +12V
16mA @ -12V

Notes: Get Amped

Amps comprises two precision linear VCAs that have been carefully designed to offer a wealth of flexibility and additional functionality. The front panel controls and signal normals allow these two VCAs to also be configured to function as: line level boosters, crossfaders, ring modulators, mixers, and much more. They can also be chained together by way of an included cable to form larger, more complex systems.

Amps features cascaded CV inputs and cascaded mix outputs allowing it to be used in a number of versatile configurations. A boost switch enables you to amplify each VCA's input by either +6dB or +20dB i ideal for boosting low amplitude signals or pleasingly overdriving audio. The addition of a phase inversion switch for the second channel allows Amps to function as a ring modulator. The CV normalization, which can also be inverted and offset, also allows for VC-Crossfader functionality.

Features

Manual LEVEL slider per VCA i convenient when using the module as a mixer, or for biasing the signal for CV (such as when modulating the VCA with a bipolar LFO).
Dedicated CV attenuators with dual color LEDs for monitoring bipolar CV signals.
Linear response curve.
Input and CV normalling of VCA A to VCA B to allow a single source to feed and/or control both VCAs.
Output normalling of VCA A to VCA B to allow both VCAs to feed a single output.
Each VCA has a boost switch that can increase the output level by either +6dB or +20dB.
Phase Invert switch on VCA B allows for ring modulation capabilities.
CV Invert switch on both VCAs allows for crossfading one signal into another.
4-pin link connectors on the rear panel allow for multiple AMPS modules to be chained together to create a 4-channel mixer; 6-channel mixer; etc.

Dimensions
6 HP
36 mm deep

Current Draw
40 mA +12V
46 mA -12V

Notes: SVF 1U

Multimode State Variable Filter

The perfect 1U, multimode, voltage-controlled filter for sweet-sounding subtractive synthesis duties or to form the basis of more complex patches. Punchy, clean, and precise. Explore new sounds through the dual modulation inputs and dedicated low pass, high pass and band pass/notch outputs. This filter responds beautifully to audio rate FM and you can self-patch to get even more interesting filter responses. Adjust the Q for a sharp howl or use it as a sine VCO.

Features:

Dedicated 2-pole Low pass filter (LP) and 2-pole High pass filter (HP) outputs.
Switchable Bandpass filter (BP) and Notch filter (N) output.
Optional +6dB input boost and asymmetric clipping circuit.
PITCH input tracks 1V/Oct accurately over 4+ octaves.
FM CV input with attenuverter.
Capable of generating very low distortion sine waves from 2Hz to 20kHz when driven to self oscillation (Max Q).

Size: 20HP
Depth: 35mm
Power: 27mA @ +12V 30mA @ -12V

Notes: All channels support headphones with 16 - 600 Ohm impendances.

Superb sound with low distortion and great low end.

Linkable channels (B to A and C to A).

All inputs with multiples, ie feeding different mixer channels.

Mono input is normalized to stereo.

Protected with relais, assuring soft starts and DC protection for your headphones (> +/- 10V input)

Width: 12 HP

Review: British rock sensation U2 deliver 'Songs Of Surrender', which compiles the best of the band's most well-known songs, which were re-recorded and reinterpreted during the pandemic lockdowns of 2020. Hits include 'With Or Without You', 'Pride', 'Bad' and 'Stories For Boys', making this a deluxe retrospective for any U2 fan champing at the bit for new material.

Notes: IsoAcoustics introduce the next evolution of their specialized line of speaker stands for the audio professional, music hobbyist, audiophile, and music lover. The new ISO Series of speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement.

With a lower profile and new contemporary design, the ISO Series of stands positions your studio closer to the supporting surface or meter bridge, and the new redesigned isolators moves the acoustic performance another step forward.

IsoAcoustics ISO Series speaker stands are built with a unique, patented isolation technology that provides a high degree of isolations and manages the speaker's energy to deliver authentic, uncoloured sound. This next generation of speaker stands effectively eliminates energy transfer into the supporting surfaces. Bass becomes tighter, overall imaging is enhanced and your speakers are enabled to perform to their full potential. Following the same design philosophy as the ISO-L8R Series, these isolation stands provide 14 variations of height and tilt adjustment to optimize the placement and performance of studio monitors by getting the tweeters in the correct alignment with the listening position.

Whether you're a pro mixing in the studio - a musician creating in a home project environment - or an audiophile who appreciates every nuance of music and sound - you'll hear and appreciate the difference with the ISO Series speaker stands. It's simply the best investment you can make for superior audio.

ISO-200:

Designed for larger speakers and studio monitors. These stands provide 14 variations of height and tilt to optimize speaker placement and performance. Isolate your studio monitors from the supporting surface and allow them to breathe so they can deliver the clearest and most accurate sound possible.

7.8"x10"/20×25.4cm Short: 3.5"/12.5cm Tall: 8.75"/22.5cm 60 lbs/27.2kg

Notes: The Golden Boy Mini - the epitome of versatile and transparent overdrive, designed in collaboration with the renowned guitarist Joey Landreth. With its exceptional harmonic detail and abundant headroom, this compact overdrive pedal takes the concept of transparent overdrive to new heights, using a simple and powerful interface.

The Golden Boy Mini is the perfect addition to any guitarist's arsenal, allowing you to shape and enhance your tone in ways you've never imagined. Its transparent nature ensures that your core tone remains intact, while adding a dynamic of warmth, richness, and depth that elevates your playing to new levels.

Its intuitive controls allow you to dial in the perfect blend of overdrive, from subtle grit to soaring, harmonically rich tones. The pedal's wide-ranging gain control ensures that it can adapt to any musical style or genre, whether you're playing delicate fingerpicked melodies or unleashing blistering solos. Pair it with Asymmetrical or Led Clipping and put the final touches with it's 3-band Baxandall-style EQ.

Beyond its exceptional sound, the Golden Boy Mini is built to withstand the rigors of the road. Its rugged construction and top-quality components ensure reliability and durability, making it a reliable companion for both studio sessions and live performances.

Whether you're a seasoned professional or an aspiring guitarist, the Golden Boy Mini will transform your tone and ignite your creativity.

Discover the Golden Boy Mini and unlock the true potential of your guitar tone. Order yours today and witness the power of transparent overdrive like never before. Elevate your sound and embark on a sonic journey with the GOLDEN BOY Mini!

Notes: The N-44G stylus offers a thicker bass sound than the N-44-7 stylus that is included with the J44A 7, which gives a brighter sound-the same difference as with the SHURE 44 cartridges.

JICO has followed the structure of the SHURE products to release the alternative replacement. Not only the sound output is as close to the SHURE M44 cartridge models but the tracking ability of the J44 performs the same with sticking to a record groove with high jump/skip resistance and low wear.

Additional information

Manufacturer : Shure
Cantilever: Aluminium
Cartridge number: M44G
Colour: DK / Grey
Tip: NUDE Conical Stylus
Tracking Force: 3.5 - 4.5 g
Type: Moving Magnet

Notes: Based on the iconic Shure M44 cartridge and N44 stylus designs, Jico's N-44 styluses are compatible with the M44 or their own J44 cartridge. This N-44-7 DJ IMP NUDE model features a conical diamond tip and a sound tailored for DJ use.

Supplier's notes:
The N-44-7 stylus offers a brighter sound than the N-44G stylus that is included with the J44D, with a thicker bass sound-the same difference as with the SHURE 44 cartridges.

JICO has followed the structure of the SHURE products to release the alternative replacement. Not only the sound output is as close to the SHURE M44 cartridge models but the tracking ability of the J44 performs as the same with sticking to a record groove with high jump/skip resistance and low record wear.

Additional information

Manufacturer: SHURE
Cantilever : Aluminum
Cartridge number: M44-7
Colour: WHITE
Tip: NUDE Conical Stylus
Tracking Force: 3.5 - 4.5 g
Type: Moving Magnet

Notes: The WHITELABEL is SHURE's Flagship DJ Phono Cartridge that has redefined and set a new standard in the DJ Industry.

With the N-WHLB NUDE, JICO provides a replacement stylus manufactured for the legendary SHURE WHITELABEL Cartridge.

Additional information

Manufacturer: SHURE
Cantilever: Aluminium
Cartridge number: WHITELABEL
Colour: DK / BLUE
Tip: NUDE Conical Stylus
Tracking Force: 1.5 - 3.0 g
Type: Moving Magnet

Notes: The WHITELABEL is SHURE's Flagship DJ Phono Cartridge that has redefined and set a new standard in the DJ Industry.

With the N-WHLB NUDE, JICO provides a replacement stylus manufactured for the legendary SHURE WHITELABEL Cartridge.

Features: Glow in the dark

Details:

100% phosphorescent pigment is used in the resin, which will stay lit by exposing it to natural or fluorescent light
Shines at a fixed brightness when exposed to black light

Additional information

Cantilever: Aluminium
Cartridge number: WHITELABEL
Colour: FLUORESCENT
Tip: NUDE Conical Stylus
Tracking Force: 1.5 - 3.0 g
Type: Moving Magnet

Notes: DJ SERIES

NUDE Tip is used for this product:

The entire tip of a NUDE Stylus is composed of diamond, as opposed to bonded tips.

The tip angle and round shape are identical to those of a standard bonded tip, while the diameter size is similar in comparison to the SAS series.

Additional information

Manufacturer: STANTON
Cantilever : Aluminium
Cartridge number: 680EL2, 681EL
Colour: WHITE
Tip: NUDE Conical Stylus
Tracking Force: 4.0 g
Type: Induced Magnet (IM)

Notes: GOBLET is an analogue filter and distortion unit with some added quirks and extra controls.

Why:

To make stuff sound filthy.
To shape the output of an oscillator.
To live interact with the sound during a performance.
To soft sweep the cutoff thanks to the optocouplers logarithmic response.

With:

Simple waves - make them unrecognizable.
Complex waves - shape them into something new.
Percussions - crank the resonance and give an acid twist to a beat.
No input - play with the feedback and the touch controls.

Dimensions:

8 HP
18 mm deep

Current Draw:

45 mA +12V
25 mA -12V

Whichever power connector you use should work fine with the polarity.

Notes: Designed with and for performing artists, Switch 4 delivers a hands-on signal switching and routing solution for your Eurorack modular synthesiser.

Quickly mute audio signals, trigger envelopes live, select modulation sources on the fly... With custom dual-action toggle switches, an intuitive interface and sturdy construction, Switch 4 will prove just as useful on stage as in the studio.

The bottom switching section includes four lever-actuated toggle switches, to make or break the signal path between the inputs and outputs. These switches feature a dual action: latched upwards, momentary downwards.

The four input signals are also sent to the top routing section, where two rotary switches allow you to select the signals to be sent to the matching outputs. Here you'll also find dual-action toggle switches, for added versatility.

Finally, all signal paths are buffered, avoiding signal cuts when shorting a jack during patching or severe loading effects when driving many inputs. The high-end components provide exceptionally low noise and distortion, so Switch 4 can reliably process audio, control voltages and gates/triggers.

Notes: By combining a mixer and four VCAs in a single module, Mix 3 manages to provide a unique combination of compact size and functionality in just 6 HP. High-end signal paths ensure extremely low noise and distortion, wide headroom and precise gain control, despite the small form factor.

Each of the three main channels has an exponential response, which is more natural for audio than linear, as it matches the human hearing. However, all signal paths are DC-coupled, so control voltage (CV) signals can be processed as well.

What truly sets Mix 3 apart from other compact mixing modules are the three CV inputs, providing voltage control over the signal levels. This even allows you to go beyond unity gain and reach up to +20 dB of amplification. Once a CV input is used, the corresponding channel knob becomes a CV attenuator.

When clipping, Mix 3 does so in a clean, symmetrical way. This yields a very pure overdriven sound, only containing odd harmonics, and allows the module to be used as a triple voltage controlled distortion.

Additional features include audio indicator LEDs, a fourth auxiliary input, voltage control over the output level and a line output jumper setting.

Notes: Make quick changes to signal routing manually or with CV control. Any audio or CV signal can be routed via two outputs in series, parallel or reverse series. Quick, clever and easy to use.

Supplier's Notes:
Signal flow is an essential concept in modular synthesis: the path taken by audio or control voltages (CVs) may be long or short, branching or linear, intuitive or highly complex.

While the patch programmability of a modular system is its greatest strength, it can also be a weakness: quick experimentation is often hampered by the need to repatch the synthesiser to change the signal flow.

Pivot 2 offers a unique solution: a compact, fully voltage controlled variable signal router. At the turn of a single knob, any signal can be routed through two external modules in series, parallel or reverse series, as well as any combination in between.

Experiment with patching wavefolders before, after or alongside filters, shuffle multiple delay lines, precisely dial in two-stage audio compression or easily control intricate feedback patches.

Looking beyond the basic signal routing application, Pivot 2 will also function as a complementary pair of counter-acting linear voltage controlled amplifiers (VCAs), a voltage controlled crossfader or a voltage controlled panner.

Analogue voltage controlled send/return router.
Seamless transitions from series, through parallel on to reverse series effect routing.
Also functions as a complementary VCA pair, voltage controlled crossfader or panner.
Impedance-compensated outputs with dual-colour LEDs.
Premium mounting hardware: black screws, black nylon washers and matching hex key.
High-quality components and assembly; designed and made in Belgium.

4 HP | +12: 60 mA, -12: 60 mA

Notes: The Keeley Compressor is the most popular boutique compressor in the world.

The Keeley Compressor Plus is the first true advancement in Keeley's 2 and 4 knob compressor line. The new features are simple and straight forward. Now, there is a simple Release Switch that is tuned for single coils or humbuckers. No more wondering if you have the attack or release set right. Your humbuckers will have all the attack and punch that they should. The Tone Control was also added, which emphasizes the most sensitive harmonics that can be lost in compression. The Compressor Plus now sports a Blend Control that retains the peaks in your playing and, more importantly, the proper phasing of your guitar signal. The Keeley Compressor Plus offers the same gorgeous push of frequencies and sweetening of tone that the old comps gave you, now with the flexibility to easily handle any instrument.

The Keeley Compressor Plus is a compressor with an expander/sustainer. Not only does it act as a regular compressor, limiting the peaks in your playing, it adds more and more gain as notes fade out. Now you have sustain. Nothing worse than a note or a bend that has died before its time. The Keeley Compressor Plus adds just the right amount of sustain and expressive bloom to your notes.

The new Release Switch on the Keeley Compressor Plus is designed to make it very easy to transition between single coil and humbucker guitars. Humbuckers have more average energy than single coils which can cause compressors to stay in "compression mode" for a lot longer. When this happens, any series of notes you play will sound dull. With the quick release of the new Compressor Plus, your humbuckers remain true sounding, and each note retains dynamic attack and definition.

The Tone Control is Keeley's own design taken from analog delays and other vintage effects. Those effects used an emphasis circuit to recover treble and highs after they went through the BBD or other analog delay lines. That circuit was then taken and made it into a full fledged tone controll- it is the perfect way to gently add back in those highs lost in the compression process.

The Blend Control is a way of getting the peaks to come through while having sustain at the same time. So if you want sustain more than peak-limiting, this style of Manhattan Compression is for you! Keep all the peaks and transients with the Blend and Tone Controls while adding sustain on the back end. Heaven!

This compressor isn't just for heavy funk or chicken pickin' anymore.The new Compressor Plus is for players wanting a smooth, subtle wash from their guitar. Remove just the right amount of peaks for an ambient layer and then blend in the right amount of treble for a nice shimmer to your guitar. Use with your favorite fuzz to create a wall of tone like you've only heard on records. Looping has never been easier than with this compressor. Consider it an essential tool when creating loops that sound well-balanced. Forget it all and use the Compressor Plus for the best amp boost you've heard. Nothing pushes an amp better than the Keeley Compressor Plus.

Notes: The Moon Op Amp Fuzz is a supermassive destroyer, spinning galaxies of gain. Tidal wave bass response gives you tones heavy as gravity itself.

The filter control offers an expanded range of usable tones and the filter switch gives you three distinct EQ phases: Scooped Mids 'classic', Flat EQ, or Full Range.

Feed the Moon Op Amp Fuzz with your favourite drive pedals and unlock worlds of complex tones.

The Moon's massive sound is achieved with a quad op amp delivering four stages of gain and fuzz. This circuit has its roots in Keeley's popular Dark Side pedal. In that design the tone and gain of the pedal were both tailored to be a vintage sounding fuzz for lead work. Keeley wanted to go 180 degrees in the other direction with this pedal's tone, the purpose being to achieve infinite sounding dreamy deep fuzz.

This is a punishingly heavy op amp fuzz designed to extend your guitar or bass frequencies as low as possible. This also means that your lead tones are as harmonically as rich as possible. So thick is the fuzz that your notes will rise and peak into brilliant feedback.

Keeley's most lunar sounding pedal: Moon Op Amp Fuzz.

Notes: Receives MIDI clock and stop/start data and converts them to DIN-Sync (Sync-24). Also converts DIN-Sync back to MIDI.

High quality Kenton MIDI MIDI to DIN-Sync converter box with opto-isolated MIDI In plus MIDI Out, Sync In & Sync Out sockets. Powered from a multi-region mains adaptor (wall wart) so you can fit and forget. Can also be powered from a USB socket (although not a USB product)

Notes: Receives MIDI data from a single MIDI OUT (e.g. sequencer or master keyboard) and produces identical copies at the 12 MIDI THRU sockets. These can then be connected to the MIDI IN of sound modules or other devices which require MIDI signals sent to them.

High quality Kenton MIDI Thru box with opto-isolated MIDI In and separate drive for each MIDI Out. Powered from a mains adapter so you can fit and forget.

Notes: Your USB device is plugged into the MIDI USB Host mk3 instead of into a computer. It provides MIDI In & Out sockets for USB MIDI keyboards and controllers which have only a USB B type socket. For example, used with a USB-Solo, it allows the USB-Solo to be used in a standard MIDI setup, just like a Pro-Solo. It has a USB Host port (USB A type socket), a MIDI In and a MIDI Out (both 5 pin DIN).

The MIDI USB Host mk3 now has additional features. In addition to the standard operating mode, there are now two further modes.

Standard mode (LED Green):
MIDI data received at the MIDI In socket is sent to the USB device and MID data from the USB device is sent to the MIDI Out socket.

Merge 1 mode (LED Amber):
MIDI IN does not go to USB device but instead is merged with MIDI data coming from the USB device which is then sent to the MIDI Out socket.

Merge 2 mode (LED Red):
MIDI IN data is sent to the USB device & is also merged with MIDI data from the USB device which is then sent to the MIDI Out socket.

The modes are selected sequentially by pressing the recessed push button - the LED colour indicating which mode is current.

The attached USB MIDI device MUST be 'Class Compliant'.

The MIDI USB HOST is powered by a regulated 5V mains adaptor (supplied), and can supply up to 1 Amp of buss power to the attached USB device. This product is supplied with a multi-region power supply suitable for use in most countries.

Attractively finished in brushed aluminium with black screen print

Dimensions: 110mm x 55mm x 32mm

Connecting
You can connect one "Class Compliant" USB device directly into the MIDI USB Host. If your host has the latest firmware already installed then you can plug in a powered USB hub and up to four USB devices can then be connected. Earlier MIDI USB Host mkIIs can be updated with a free download which is available from the support section of our website. Serial numbers N6-2421 already have the hub compatible firmware. Serial numbers N3-0541and upward can be updated.

It is recommended that you attach your USB device to the MIDI USB Host before applying power. Then plug-in and power the power adaptor. The active LED should be lit up. If you apply power with nothing plugged into the MIDI USB Host, the Active LED will flash steadily; this is to indicate that it is waiting for a suitable device to be attached. If it is still flashing when you have attached your device, then it is possible that your device is not class compliant, however you could try turning off the power and start again.

Some USB MIDI devices have two modes of operation and can be set to operate in Class Compliant mode even if this is not the default. The Class Compliant mode might be called "generic driver", the other mode may be called something like "advanced driver". Consult the device manual to see if the mode can be set for Class Compliant.

If you unplug then re-plug the USB cable while it is powered the device might reconnect, but it is not certain.

Power

It is essential to use only the supplied 5V regulated power adaptor. Applying a voltage higher than 5V to the MIDI USB Host will probably not damage the MIDI USB Host itself, but it could damage any attached USB device as the 5V is passed on to the attached USB device for buss power. There is protection circuitry inside the MIDI USB Host to protect against reverse polarity and over-voltage, but these should be treated as a last resort and are not guaranteed to prevent damage to an attached USB device in the event of over-voltage as the USB buss voltage could rise to 6.5V before being clamped.

Care should be taken to ensure that power adaptors for other pieces of equipment are not accidentally plugged into the MIDI USB Host.

If the input voltage rises above 6.5 volts then power will be shut off. The LED will go out and the unit will not operate again until power has been removed for at least 60 seconds. This allows time for the thermal fuse to reset.

The following Yamaha keyboards ar known to be class compliant and therefore should work OK:

PSR-E353, PSR-E443
PSR-S670, PSR-S770, PSR-S970, PSR-A3000, TYROS-5
NP-12, NP-32
DGX-650, DGX-660
P-105, P-115, P-255

The following keyboards are known to incorporate a USB hub and therefore will only work with firmware v2005 or later (s/n N6-2421 and above) for the MIDI USB Host:

Korg Microkey 61
Korg Microkey 49
Korg Microkey 37

Power: 90mA, USB mini-B socket - leaving 910 mA available for the attached USB device
Dimensions: 110 x 55 x 32 mm
Weight: 100g (excluding power supply)
MIDI: 1x IN, 1x OUT - both 5 pin DIN
Power Supply: 5V DC / 1 Amp regulated - (never use an unregulated supply as unregulated supplies typically give a higher output voltage than shown).

This product is supplied with a multi-region power supply which is suitable for use in the UK, EU, US/Canada and AUS/NZ.

Notes: Focused versatility seems an oxymoron when describing the features that led us to design the Mixwitch.

With only a pinch of mixing, inverting and controlled switching, we brew up a plethora of combinations and uses.

This is voltage processing magic!
The Mixwitch design comes from a frustration with attenuvertors (bipolar attenuators-inverters) whose off (neutral) position is difficult to retrieve, especially in live situations.

We went for a digitally-controlled analog path where polarity inversion would be at the touch of a button. So, the usefulness of attenuating/inverting can be realized by turning the pot down, swiftly pressing the inversion button and reopening the level. The zero level is where you expect it, with the pot full down.

Once we had a clean polarity control, we easily added a mute function offering the benefit of pre- adjusted pot settings ready to be activated at will.

The next step was to bring something extra, useful and creative. There are plenty of analog switches controlled by a clock; but arbitrarily selecting an input with a voltage is less known. Having both control capabilities combined with our specific mixer features creates a unique fusion: welcome to the Mixwitch !

Notes: Clever four-channel utility module designed to make it easier to achieve perfect oscillator tracking and transpose CV signals. Also includes some neat quantising and portamento features.

Supplier notes:
The CalTrans solves issues encountered when playing tonal music with a modular system: tracking problems, curves unrelated to Volt per octave ratio, limited octave range, cumbersome transpose, ...

The CalTrans corrects and expands the range of troublesome VCOs and brings V/Oct tracking to anything that oscillates.

Besides calibration, the CalTrans offers live play features. Each channel can be quantized and any combination of them transposed jointly.

A pair of rotary encoders with detent allow an precise selection of octaves and semitones.

VCOs whose tracking doesn't go high enough to follow the leader will see their pitch repositioned in their highest possible octave so that the global harmony is unaffected.

You can add a pinch of portamento and glissando to each channel and save the whole in user presets.

Notes: Affordable logic processing in this appealing little module from Klavis. Two independent dual-input processors offer a total of 15 different functions, with different options on each section.

Supplier's Notes:
Two dual-input sections can be used independently, put in parallel for 4-input wide logic, or chained for more advanced processing.

Each section presents normal and inverted outputs.

The two sections offer a set of common and specific functions for a total 15 different ones.

Several functions offer real-time CV control for dynamic changes of the conditions.

All time-related functions can be independently user adjusted and are saved automatically.

LEDs tell permanently the actual status of all outputs.

Dimensions:
5 HP
21 mm deep

Current Draw:
31 mA +12V
1 mA -12V
0 mA 5V

Notes: Queequeg 2

Sub Generator

Reawaken The Depths Below

KMA Machines released the original Queequeg in 2016. The pedal was our take on how simple and effective an analogue monophonic suboctave device could be.

Time doesn't stand still and so with Queequeg 2, KMA's aim was not only to update the device with a more striking appearance, but also add an additional sub-octave and the ability to switch and mix between them. With a small footprint, the updated pedal also has top mounted jacks and relay based soft switching for the modern age. Queequeg 2's super, easy-to-use and ultra-fast tracking sub-octaver works equally well on guitar, bass and synth, so these classic earth-shakingly awesome tones can find their way to any setup out there.

"Releasing the harpoon from his grasp, Queequeg gazed into the depths of the bleak waters that stretched down endlessly beneath him. Mindful to the aim of his adversary, the giant whale plunged further and further into the darkness of the abyss. This subaqueous dominion would forever be his rightful place. Queequeg 2- look deep down and believe."

Thickening up your tone slightly, blasting out faux bass-synth resonances or even filling in for a missing bass sound are just some of Queequeg 2's specialties. The pedal's super quick tracking benefits from KMA's custom all-analogue circuit design, giving you very organic and smooth suboctave tones.

Dead simple to operate, this tonally deep submergence vehicle offers three sub-octave settings to choose from. These allow you to turn your guitar into a filthy bass guitar with ground shaking lows, alternatively adding extra depth to basses and mono synths alike. The toggle switch lets you select between either the first octave (-I), the second (-II) or mix both together (-I/-II) which gives you a thunderously massive wall of sound, it even changes colour depending on the mode.

With its one knob MIX control, you are able to dial in just the right blend of the generated octaves and your clean signal. From completely clean on the left, to 100% suboctave action on the right and all with different sonic blends in between, you're sure to find your mighty vessel of tone.

Beware - don't let your lows be dragged under! Queequeg 2 draws the line right here and ends your hunt for an easy-to-set and great-sounding all-analogue and thundering sub-sonic beast!

Notes: Fuzzly Bear 2 - Unleash the Beast, again

"Through the untamed wilderness of the forest strives a grizzly monster, its glistening eyes peeking through the undergrowth. Endowed with razor sharp claws and bone-crushing teeth, this beast will rip through any intruder that dares to trespass into its domain. A thundering, sizzling roar distortedly echoes through the woodland. It's here! It's time to face the Fuzzly Bear!"

In 2013, KMA Machines' first ever production pedal was inspired by an old, obscure and highly underrated fuzz box from the 1970s - the Jordan Bosstone. The original Bosstone wasn't even a pedal, it was a device you plugged directly into your guitar, which brought a host of problems. Hence, KMA Machines greatly refined the circuit for the original Fuzzly Bear, to get the essence of that old-school sound, but giving it some modern twists by sorting out the low end and adding a Bias control, to help players explore lots of new tonal capabilities of this long-forgotten box of dirty tricks.

With Fuzzly Bear 2, KMA Machines put this now classic re-imagined fuzz into a modern, more pedal board friendly enclosure with top mounted jacks, enhanced it with relay-based silent switching and improved electronics.

Back in the day, the main reason why the Jordan Boss Tone did not conquer the world of effects was actually due to its massive lack of bass. However, its core fuzz sounds could be truly heavenly with tones ranging from a purring overdrive, to downright vile and aggressive fuzz assaults. But when you awoke it, dug in and found 'that' tone, boy was it good and not at all harsh and gritty, like so many other fuzz designs at the time could be.

When designing and modifying the circuit, all the fuzzy goodness was kepy, but KMA Machines brought back the essential low end and gave some more tonal control, all to make this new take take fit more modern styles without compromising the core sound and simplicity.

The GAIN knob delivers a whole range of different fuzz shapes. Back it off to get a dirty chunky overdriven tone, turn it up to give the FUZZLY BEAR 2 a thick and thicker coat of fur. Set the gain fully clockwise and magic will happen! The pedal's smooth, warm and cosy decay turns into a starved and gated fuzz sound that almost gives a ghost octave, pseudo trumpety kinda vibe - perfect for classic tunes of yesteryear.

Fuzzly Bear 2 SKIN/MEAT control adjusts the bias of the circuit. Think of it as the claws of the beast. You can dial in a sharp drive tone that only brazes the skin, a thick and meaty wall of fuzzy fur that can rip right through the intruder's flesh and anything in between.

Don't confuse this pedal with a cute brown bear cub - this is the Fuzzly Bear 2 and it will maul your face off!

Review: Knitting Factory and Partisan Records share the sixth instalment of the much-anticipated vinyl reissue box-sets from the Fela Kuti catalog. Box #6 is curated by actor, producer, DJ, rapper and singer, Idris Elba (aka. DJ Big Driis). Limited to an edition of 5,000 worldwide, this one includes a 24-page booklet with lyrics, commentaries by Afrobeat historian Chris May, together with some never-before-seen photos, not to mention a 16x24" poster designed by Lemi Ghariokwu, the creative force behind many of Fela's greatest album covers. Previous curators include Chris Martin, Erykah Badu, Ginger Baker, Brian Eno, and Questlove.

Notes: Strom+ is a strong, reliable and safe 4HP power solution for your modular system. The Strom+ power module includes many safety mechanisms to prevent your modules from being damaged. These include most importantly short-circuit protection, overvoltage protection and a replaceable main input fuse. See the full list below.

Strom+ also offers a current sensing technology that indicates current consumption of your system. LEDs of each rail will turn orange then red, when current consumption reaches or crosses the maximum load of that rail.

Strom+ has extremely low ripple, even under full load. This means better sound and stability for your modules.

One module can power multiple skiffs via Strom Passive Module, a Strom Connector Cable, or a KOMA Strom Busboard.

Technical Specifications

Inputs and Outputs

Output: 1.5A @ +12V | 1.5A @ +5V | 1.0 A @ -12V
Input: 15V, 4.6 A (center positive)

Safety Mechanisms

Replaceable input fuse. Protects the wall-plugged adapter. The KOMA Strom AC/DC adapter actually has its own protection mechanisms and will itself shutdown in most cases before the input fuse trips.
Input overvoltage. Strom+ works up to specification from 15V - 20V input and works out of specification up to 28V input.
Input reverse polarity protection
Output overvoltage protection
Output short-circuit protection
Output over current protection
Output undervoltage protection
All above output protections independent for each rail. If any rail fails, the whole module shuts down.
Connectors and Controls

Main DC-Input (15 VDC)

On/Off switch
Front panel connector to a passive Strom module
2 standard Eurorack 16-pin connectors (for modules or a flying busboard)
Back panel Strom connector to solid busboards

Dimensions

4HP
48mm without Eurorack power connector connected (distribute power via Strom connector cable)
52mm with Eurorack power cable connected