100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 50 of 137 on page 1 of 3
1  2  3  »
Cat: 719655 Rel: 03 Sep 19
 
High quality stereo digital FX for AE modular
Notes: Stereo effects processing for Tangible's affordable AE modular system. Offers a total of 15 digital effect programs with CV control over three parameters each. Can run in Eurorack via an optional adaptor frame.

Supplier notes:
The MULTIFX module offers 15 different stereo audio FX programs, a wide variety from common FX like reverb and delay to unique effects like Ring Crusher or Glitch delay. Also a nice shimmer effect is onboard.

Each program has 3 parameters that can be adjusted and additionally be CV-controlled.

With a switch the sample rate can be reduced to half the normal rate, resulting in doubling the effect times (with reverb, delay...) and introducing a nice portion of aliasing.

It is based on the FV-1 DSP chip that is well-known from other FX-modules in the Eurorack world; the MULTIFX module offers the 7 factory programs of the chip plus 8 new and unique ones created by Tangible Waves.
Read more
 2 in stock $110.46
Click for better price!
quote 719655
Cat: 745109 Rel: 06 Sep 19
 
Compact yet flexible mix module - 6HP
Notes: Even with small patches with only a few modules, you usually have to combine individual signals into a single sum: You need one mixer, maybe two, and preferably as small as possible.

With Sum 42, Vermona present a compact yet versatile Eurorack mixer. You can use it as two 4-in-1 or one 8-in-1 mixers. It can process both audio signals and control voltages.

Sum 42 is an indispensable tool with a perfect size/benefit ratio.
Read more
 1 in stock $127.13
Click for better price!
quote 745109
Cat: 737544 Rel: 26 Jun 19
 
All-analogue distortion & lowpass filter - 4HP
Notes: Viol Ruina is an all-analogue distortion and lowpass filter with an internal envelope follower and self-modulating cutoff. The four-pole design is reminiscent of the classic filters we all know but with a completely new and slightly ridiculous twist. The independently addressable distortion circuit takes VR into overdriven paradise with a shocking amount of drive. Built-in envelope following makes an easy way to create dynamic patches with the flick of a switch, and feedback FM takes VR to a whole new realm of filthiness. Run a sound through VR, you'll get something cool out of it.
Read more
 3 in stock $128.18
Cat: 688774 Rel: 31 Jan 19
 
Compact digital oscillator with a resolution of 16Bit/48kHz
Notes: The 'MCO' is a compact digital oscillator. It features a main 'morphing' wavetable output, an additional copy of this output with overlaid variable pulse width segments (ala Alpha Juno style saw wave pwm) and a sub square wave output an octave down to the main output. The waveform and pulse segment width and be both directly and voltage controlled. The pulse segment distribution can also be voltage controlled via the 'type' input.

Expect an early 90s slightly crunchy digital type sound (ala Ensoniq, Kawaii KX synths) rather than something striving for perfect analog emulation.
Read more
 5 in stock $143.82
Click for better price!
quote 688774
Cat: 727394 Rel: 23 May 19
 
Powerful distortion module - 4HP
Notes: Terci Ruina combines three classic distortions in 4 hp. Distortions are reinterpreted in classic NE style and routed through each other for complete sonic annihilation of any sound. Patch in and out anywhere in the signal chain to pick the best sound for your purpose (because modular). Looking for a pretty distortion? This is probably not your module. Unapologetically gross and dirty.
Read more
 1 in stock $127.13
Cat: 686654 Rel: 30 Apr 18
 
Dual drum/sampler module with 64 samples, pitch, decay & volume control
Notes: Erica "Pico DRUMS" module gives you two independent great sounding drums with versatile control over several parameters and extensive collection of drum samples. Chain up several Pico Drums and get one of the smallest modular drum setup in the modular world!

You can also upload your own drums (samples) on it using the programmer device.
Read more
 4 in stock $134.43
Click for better price!
quote 686654
Cat: 686670 Rel: 27 Apr 18
 
8 great sounding custom stereo effects in just 3HP
Notes: Pico DSP is a small brother of the popular stereo effects processor Black Hole DSP. It contains eight algorithms, in detail four delays, two types of reverb, Leslie speaker emulation and an Overdrive/Bitcrusher. Each effect is editable in two parameters. One of them can be modulated using the CV input. Pico DSP features clear, high-resolution sound. Alongside the established standards, it is also possible to generate lots of freaky special effects.
Read more
 5 in stock $132.34
Tiptop Audio Happy Ending Kit (black) (modular synth starter kit)
Cat: 590437 Rel: 10 Nov 15
 
Modular starter kit containing rails, rack ears and power supply
Notes: The Happy Ending Kit is an easy way to get everything needed to start a Eurorack modular system.

The Happy Ending Kit includes:
1 x Z-Rails set plus screws to attach to Z-Ears
1 x uZeus 4HP PSU with 2 x flying bus boards
1 x UK 3-pin mains adapter
Read more
 1 in stock $143.82
Cat: 557509 Rel: 19 Dec 14
 
Clocked sequential binary event machine module
Notes: BRAINS is a clocked sequential binary event machine. It is designed to be connected to one or two Pressure Points to form a 4 or 8-Step 3-channel analog sequencer. Classic synthesis control!
Read more
 3 in stock $112.55
2hp
Cat: 684048 Rel: 28 Mar 18
 
Karplus-Strong based physical modelling synth module - 2HP
Notes: Pluck is a physical modelling synth voice. It uses the Karplus-Strong algorithm to create plucked string sounds. The dampening control sets the size of the string and allows for dramatic timbral shifts.

The decay control changes note length from percussive transients to infinite harp sounds. In addition, four voice polyphony provides complex layered tones; all from a single sound source.

Strum a new chord with Pluck.
Read more
 3 in stock $133.39
Cat: 716959 Rel: 29 Jan 19
 
Matrix mixer with 4 rows & 4 columns - 20HP
Notes: Module A-138m is a 4 x 4 matrix mixer with switches for unipolar/bipolar mode for each column. Unipolar means that the controls work as attenuators. Bipolar means that the controls work as polarizers. In this mode the amplification is zero in the middle position of the corresponding control. Turning the knob counter-clockwise from the centre position the signal is subtracted from the output sum with increasing amount (i.e. negative). Turning the knob clockwise from the centre position the signal is added to the output sum with increasing amount. The module is DC-coupled and can be used for both audio and control voltage mixing.
Read more
 4 in stock $129.22
Click for better price!
quote 716959
Cat: 690914 Rel: 26 Jul 18
 
16 output ultra-flexible MIDI to Trigger, Sync, Polyphonic CV, Gate & more
Notes: The Mutant Brain is the central nervous system connecting your modular analogue Eurorack system to MIDI gear, especially for percussion, polyphonic notes and sync duties! It packs 16 Eurorack compatible outputs into a tiny, super affordable 8HP package.

The 4 CV outputs and 12 Gate/Trig outputs are all universally reconfigurable. Triggers, gates, clock divisions and sync signals, polyphonic keyboard playing, velocity, sequencer transport, LFOs - you name it!

Configuring your patch is easy - just assign each output as you like in the Mutant Brain Surgery configuration utility, then send the MIDI SysEx file to the module and forget about it - the Mutant Brain remembers it all for you.

Hexinverter supply a convenient download pack of pre-configured, ready to use Mutant Brain patches for some select sequencing and drum machine devices on the market today, easily turning those sequencers and drum machines into a modular control powerhouse!

Designed with live and studio performance in mind, the Mutant Brain does away with wasted panel space and complex menu-diving interfaces, while freeing you from the limited "auto-learn" type MIDI interface. An auto-learn interface sometimes doesn't play well with the limitless combinations of different gear setups which today's modular performers play live with.
Read more
 7 in stock $147.99
Cat: 739050 Rel: 19 Jul 19
 
Three-channel active/buffered attenuverter & summing mixer
Notes: Triplatt is a three-channel active/buffered attenuverter and summing mixer. Each channel has a knob, which can function as a unipolar attenuator or a bipolar attenuverter, depending on the setting of its corresponding two-position polarity switch.

Each input is normalled to a built-in precision +5V DC voltage source. With nothing plugged into the jacks, each knob controls a voltage range of 0 to +5 V or -5 to +5 V depending on the position of the channel polarity switch. Outputs A and B are also capable of a range of 0-10 / -10 to +10 when using the special function switches.

Each output is normalled to mix into the output of the channel below, making it possible to do sub mixes in groups of two or three.

In addition, each channel has a "special function" switch to alter its input voltage in a specific way. Channel A has a 2x voltage multiplier switch, allowing you to double the voltage sent into Channel A. Channel B has a +5V switch, allowing you to add 5V to whatever voltage is sent into Channel B. Channel C has a mute switch, allowing you to completely turn off the signal being sent into Channel C.
Read more
 3 in stock $106.30
2hp
Cat: 706868 Rel: 15 Oct 18
 
Voltage controlled multi mode filter
Notes: MMF is an analogue, multimode filter with a 12dB per octave slope. Its sonic character swings all the way from classic low pass to squelchy acid lines. Simultaneous outputs of low pass, high pass, and band pass filter types are provided allowing for many variations of the input signal. Whether you're looking for smooth and creamy, or resonant and wild, MMF can go there.
Read more
 1 in stock $102.12
2hp
Cat: 709206 Rel: 05 Dec 18
 
Compact sampler featuring Micro SD slot for easy sample loading - silver faceplate
Notes: Play is a high-fidelity sample player with a full feature set.

Up to 32 samples can be loaded at a time and dynamically switched between using the file knob and associated CV input. Playback modes include one-shot, looping, or gated playback; all with extremely low latency. Transform your samples by pitching them up two octaves or down three octaves, all with a pitch knob that can be free running or quantized to semitones. The pitch CV input tracks volt per octave across its entire range and allows for musical sequencing of samples. Play ships with a pre-loaded SD card packed with loops, drum hits, and field recordings to get you up and running immediately.
Read more
 1 in stock $134.43
2hp
Cat: 649102 Rel: 11 May 17
 
Stereo reverb Eurorack module
Notes: Verb is a lush stereo reverb with a full feature set and superior audio quality. A wide range of reverb times take your sound from small room to never-ending concert hall.

CV over mix allows dynamic movement between the dry and reverberated sound, and the dampening control lets you dial in the perfect timbre for the wet signal. Whether you need a traditional reverb for an FX send or an esoteric sound design tool, Verb can take you there. Get lost in space with Verb.
Read more
 3 in stock $102.12
Cat: 589508 Rel: 09 Dec 15
 
Power solution for eurorack systems - 30W
Notes: Row Power is a clean, regulated, and protected power solution for eurorack systems. Row Power 30 provides 30W of power, suited for any typical eurorack row (84HP to 168HP):

+12V @ 1.5A
-12V @ 750mA
+5V @ 500mA
Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Daisy-chain multiple Row Powers to use a single power brick for multiple rows (typically 3-5 rows per power brick). Each row will be independently regulated and protected for ultra-low cross-talk between rows. Rows can also be hot-swapped (plugged/unplugged without powering the whole system down).
Read more
 2 in stock $103.17
Cat: 714704 Rel: 22 Jan 19
 
Compact voltage-controlled four-channel audio mixer - 8HP
Notes: A-135-2 is a miniature version of the A-135-1. Behind a front panel with 8 HP only four linear VCAs (voltage controlled amplifiers) and a voltage controlled mixer based on the VCAs are available.

Controls, In/Outputs and Functions of each VCA:

- Level (manual control of the VCA amplification), small rubberized knob (L1...L4)
- Control voltage input with associated attenuator (CV1...CV4), for the full VCA control range about 0...+5V control voltage are required (attenuator fully clockwise), for higher control voltages the attenuator is used, the attenuators are without knobs, just plastic shafts with white marker
- Signal Input
- Signal Output
- All inputs and outputs are DC coupled. Consequently the VCAs can be used to process both audio and control voltages (e.g. to control the level of LFOs or envelopes)
- The signal input is not equipped with an attenuator. But the VCAs can process all signals up to 15Vpp / -7.5...+7.5V without clipping. In case of higher levels an external attenuator is required (e.g. A-183-1).
- The available amplification range is 0...1, the maximal amplification is 1 (i.e. it "clips" and remains at 1 even if the control voltage goes beyond the value that corresponds to amplification 1)

Functions of the voltage controlled mixers:

- Two outputs ("Selected" and "All")
- Selected output: the ouput if a VCA is removed from this sum signal when a plug is inserted into the corresponding VCA output.
- All output: sum of all VCA outputs, regardless of inserted plugs into the VCA outputs
- The maximal amplification is about 0.6 to avoid clipping at the mixer outputs (otherwise the outputs may distort with 15Vpp signals at each signal input and full amplifications)

Special functions of the voltage controlled mixers (selectable by internal jumpers):

- Dual Stereo VCA: In this case the control unit of VCA1 (L1 + CV1) affects also VCA3 and the control unit of VCA2 (L2 + CV2) affects also VCA4, the control units of VCA2 and VCA4 are out of operation
- Quad VCA: In this case the control unit of VCA1 (L1 + CV1) affects all four VCAs. The control units of VCA2, VCA3 and VCA4 are out of operation. In this mode the module has the same function as module A-132-2. That's why module A-132-2 will be discontinued.
- Normalling of the signal inputs: by means of internal jumpers signal input 1 can be normalled to signal input 2, signal input 2 to signal input 3 and signal input 3 to signal input In 4. That way the same input signal can be distributed to four different channels by means of control voltages (e.g. quadrophonic distribution of audio signals). Suitable control voltage sources are e.g. A-144 (Morphing Controller) or A-143-9 (Quadrature LFO).
Read more
 4 in stock $120.88
Click for better price!
quote 714704
Cat: 684450 Rel: 18 Jul 18
 
Dual ADSR envelope generator - 8HP
Notes: Module A-140-2 contains two ADSR type envelope generators behind a front panel with 8 HP only.

Each ADSR provides these controls and in/outputs:

- LED (displays the envelope output)
- A: manual Attack control
- D: manual Decay control
- S: manual Sustain control
- R: manual Release control
- Gate Input
- Retrigger Input
- CVT Input with attenuator (CVT = CV Time)
- Envelope Output 1
- Envelope Output 2

The output voltage range for each envelope is 0 - 10V. The time range of Attack/Decay/Release is about 1ms to 30s.

By means of internal jumpers one can select which time parameters are controlled by the CVT input (e.g. D only or D+R or A+D+R) and in which direction (i.e. if an increasing CVT shortens or stretches the time parameter in question).

Socket CVT can be normalled to an internal fixed voltage (i.e. the switching contact is connected to an internal fixed voltage). That way it's possible to change all time parameters simultaneously by means of the CVT control.

Another jumper is used to set output 2 to normal or inverted envelope.

And another jumper is used for the normalling of Gate 2 to Gate 1 (i.e. ADSR#2 is also triggered by Gate 1).

Two more jumpers are used for the optional bus access to the gate signal of the bus for each ADSR. Changing the positions of the mentioned jumpers allows to modify the factory settings.
Read more
 2 in stock $121.92
Cat: 704130 Rel: 01 Oct 18
 
Multimode filter based on the Steiner-Parker design - 8HP
Notes: Welcome to the Forbidden Planet, an all analogue multi-mode filter design influenced by the 1975 Steiner-Parker Synthacon model. Control the Forbidden Planet manually or through CV and take the sound of your Eurorack into new orbits.

Forbidden Planet has three filter input jacks: High Pass, Low Pass and Band Pass. The High Pass section is this module's signature sound - a crisp sharp-cut with no residue, designed to add High Pass filtering capability to Tiptop Audio's wide range of Eurorack modules. Send a throbbing kick drum through the High Pass section and filter out the rumbling lows while maintaining the pulse of the beat. The Bandpass is clear and useful in isolating a pie-slice-range-of-frequencies while cutting off the low and highs, great for accurate sound design or sculpting audio into that sweet spot. The Low Pass is an airy classic 12db two-pole analogue slope ideal for monophonic synth patches and filtering down to the essential low-end bass we all love.

The Forbidden Planet Resonance utilizes an internal feedback path which can sound smooth or aggressive depending on the knob setting. At a low setting, it emphasizes the cut-off harmonics, at middle settings it begins to self-oscillate, and towards maximum setting it forms interesting tones and all sorts of chopped grainy bits of self-oscillation perfect for entering into a sci-fi world.

The Forbidden Planet is an impressive multi-mode analogue filter which adds a broader filter spectrum to the Tiptop Audio modular family and unlocks forbidden creative possibilities in a small package.
Read more
 5 in stock $104.21
Cat: 739049 Rel: 19 Jul 19
 
Headphone amp capable of driving high impedance headphones via a 1/4" stereo Neutrik jack
Notes: Outs enables your modular system to output both professional and prosumer compliant audio, and send it to external amplifiers, mixers, recording devices, or DAW interfaces. Using the L+R Level knob, it scales modular-level voltages down to the level required to drive external gear at either the +4dBu balanced professional line-level standard or the -10 dbV unbalanced standard.

Headphone monitoring is also provided via a low noise built-in headphone amp (with its own independent level control), capable of driving a wide range of impedances - from studio grade headphones to portable style earbuds.

To use Outs, simply connect the final output of your patch to the 1/8" inputs (where the built-in activity LEDs light up to indicate the presence and intensity of the input signal). The left input is normalled to the right, so you can create a stereo signal from a mono source. Or if you have an Intellijel Mixup, you can remove a jumper from its rear panel, and connect it to the Outs module using the 3-pin link cable included with the Mixup.
Read more
 5 in stock $138.61
2hp
Cat: 675792 Rel: 26 Jan 18
 
Snare drum module featuring classic to esoteric snare sounds & blips
Notes: Snare goes from short blips to 909 hits and everywhere in between. More than just a typical snare sound, this module is a powerful sound design tool that encourages exploration. 1V/Octave tracking allows percussive melodies with atypical timbres, while snap dials in the texture of the metaphorical membrane. Hit the back beat with Snare.
Read more
 1 in stock $113.59
2hp
Cat: 686020 Rel: 04 May 18
 
Versatile hi hat with six oscillator architecture
Notes: Hat is a hi-hat cymbal with a wild side. Finding something unique is easy with a blend of sounds ranging from robotic to metallic. At its core are three unique sound sources made up of six oscillators, a noise generator, and a number of filters. Sizzle affects each source independently, adjusting oscillator and filter frequencies, allowing for a broad range of sounds. In addition, separate trigger inputs for open and closed allow for a complete hi-hat pattern on a single module. No matter what situation it's in, Hat provides shimmering, metallic timbres for any percussive purpose.
Read more
 1 in stock $118.80
2hp
Cat: 714254 Rel: 17 Dec 18
 
Compact physical modelling synth module featuring Karplus-Strong based algorithms - 2HP
Notes: Pluck is a physical modelling synth voice. It uses the Karplus-Strong algorithm to create plucked string sounds. The dampening control sets the size of the string and allows for dramatic timbral shifts.

The decay control changes note length from percussive transients to infinite harp sounds. In addition, four voice polyphony provides complex layered tones; all from a single sound source.

Strum a new chord with Pluck.
Read more
 1 in stock $133.39
2hp
Cat: 652192 Rel: 06 Jun 17
 
Looper module for Eurorack synthesisers - 2HP
Notes: Freez is a voltage controlled locked looper. It captures moments of audio in buffers, where they can be minced and mangled beyond recognition. Once frozen, adjusting size will cause pitch and timbre changes to the locked audio.

Adjusting the sample rate control will distort and decimate the incoming audio as well as warp the time domain of the currently locked buffer. From beat repeat to granular audio buffer, Freez will create new sounds and textures out of any input signal.
Read more
 3 in stock $113.59
Click for better price!
quote 652192
2hp
Cat: 686019 Rel: 04 May 18
 
Looper module for Eurorack synthesisers - 2HP
Notes: Freez is a voltage controlled locked looper. It captures moments of audio in buffers, where they can be minced and mangled beyond recognition. Once frozen, adjusting size will cause pitch and timbre changes to the locked audio.

Adjusting the sample rate control will distort and decimate the incoming audio as well as warp the time domain of the currently locked buffer. From beat repeat to granular audio buffer, Freez will create new sounds and textures out of any input signal.
Read more
 1 in stock $110.46
2hp
Cat: 725427 Rel: 03 Apr 19
 
Melodic percussion generator
Notes: Bell is a melodic percussion generator based on modal synthesis. By synthesizing the vibrations of complex geometric shapes, Bell provides a simple interface for creating metallic sounds that can both emulate acoustic instruments, and defy physics. Its sonic palette includes numerous physical models that span the range of vibraphone, marimba, glockenspiel and Tibetan bowls. In addition, damping allows for the articulation of all voices, and enables drastically changing the tone of your patch with a single knob turn.

It's time to ring your Bell!
Read more
 4 in stock $143.81
Click for better price!
quote 725427
Cat: 589506 Rel: 09 Dec 15
 
Power solution for eurorack systems - 40W
Notes: Row Power is a clean, regulated, and protected power solution for eurorack systems. Row Power 40 provides 40W of power, suited for up to two typical eurorack rows:

+12V @ 1.5A
-12V @ 1.3A
+5V @ 1.5A

Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Daisy-chain multiple Row Powers to use a single power brick for multiple rows (typically 3-5 rows per power brick). Each row will be independently regulated and protected for ultra-low cross-talk between rows. Rows can also be hot-swapped (plugged/unplugged without powering the whole system down).
Read more
 2 in stock $134.43
Cat: 676693 Rel: 18 Jul 18
 
Quad voltage controlled envelope generator - 8HP
Notes: A-141-4 is a quad voltage controlled Envelope generator and is primarily planned for polyphonic applications. The module contains four ADSR type voltage controlled envelope generators with common manual controls and CV inputs with polarizers for the all parameters Attack (A), Decay (D), Sustain (S) and Release (R). Each of the four envelope generators has available a gate input, a control LED and an envelope output.

The module has these controls and in/outputs are available:

- Attack (manual control)
- Decay (manual control)
- Sustain (manual control)
- Release (manual control)
- CVA control (polarizer for Attack CV input)
- CVD control (polarizer for Decay CV input)
- CVS control (polarizer for Sustain CV input)
- CVR control (polarizer for Release CV input)
- CVA socket (Attack CV input)
- CVD socket (Decay CV input)
- CVS socket (Sustain CV input)
- CVR socket (Release CV input)
- Gate inputs 1 - 4
- Envelope outputs 1 - 4
- LED displays 1- 4 (envelope display)

The output voltage range for each envelope is 0 - 10V.
Read more
 2 in stock $144.85
Click for better price!
quote 676693
Cat: 676696 Rel: 01 Feb 18
 
Four-fold envelope follower with adjustable attack & release time for each channel
Notes: The A-135-4C is composed of four envelope followers with adjustable attack and release. The circuit was designed to be used as an addition for the A-135-4A/B Performance Mixer, adding ducking, compressor and expander functions to the mixing system. However, thanks to a full set of inputs and outputs, it is also possible to employ the A-135-4C for other tasks.

The A-135-4C offers four identical envelope followers. Each modulator comes equipped with an audio input, attack and release potentiometers as well as a CV output. LED's visualize control voltages generated by the module. The A-135-4C can be connected to the A-135-4A/B Performance Mixer via a Ribbon cable. Users are able to determine whether audio material gets tapped off directly after the input connectors, behind the gain stages or after the level control of the A-135-4A. By plugging in patch cables into the envelope follower's inputs, the internal routing can be suspended.
Read more
 1 in stock $111.50
Click for better price!
quote 676696
Cat: 671585 Rel: 29 Nov 17
 
Module consisting of voltage-controlled low frequency oscillator (LFO) & voltage controlled amplifier (VCA) - 8HP
Notes: Module A-147-2 is the successor of the VCLFO A-147 but offers much more features than the predecessor. The module is made of these sub-units:

- VCLFO: voltage controlled low frequency oscillator
- VCA: voltage controlled amplifier, switchable to voltage controlled polarizer
- VC delay unit: voltage controlled linear attack envelope (only one parameter: attack) for delayed LFO operation in combination with the VCA (e.g. delayed vibrato/tremolo)

LFO: The voltage controlled LFO has the waveforms Triangle, Sine, Sawtooth and Rectangle available and features a Reset/Sync input. Triangle/Sine and Rectangle are displayed by means of dual-colour LEDs (probably red/green), Sawtooth has a unicolor LED available (probably blue). The output levels are about -4V...+4V for Triangle, Sine and Rectangle. The Sawtooth level is about 0...+8V.

The CV control can be switched to attenuator or polarizer ("CV Mode" switch). In polarizer mode the CV inputs affects the frequency in the reverse manner when the CV control is left from the centre position. In the centre position CV has no effect and right from the centre the control works like a normal attenuator. The frequency range (without external CV) is from about 0,005 Hz (i.e. about 3 minutes per period) to 200 Hz (with external CV max. frequency about 1kHz). In addition a ultra-low mode can be activated by means of an internal jumper. When the ultra-low jumper is set a fixed voltage is connected to the switching contact of the "LFO CV" socket. In polarizer mode of the CV control that way extremely low frequencies (up to one hour period and more) are possible. For this a jumper has to be installed on the pin header JP6. In the factory a dummy jumper is installed on the pin header JP7 "Dummy". JP7 has no function and is used only for "parking" of the jumper. Simply remove the jumper from JP7 and plug it on JP6. JP6 is located behind the CV control.

VCA: This is a linear VCA that can be switched to "normal" VCA (i.e. kind of a voltage controlled attenuator) or voltage controlled polarizer ("VCA Mode" switch). In the "normal" VCA mode amplification +1 is achieved with about +5V control voltage. In polarizer mode the amplification ranges from about -0.5 (i.e. inverted signal with about 50% level) with 0V CV to +0.5 (i.e. non-inverted signal with about 50% level) with +5V CV. With about +2.5V CV the signal is suppressed. Details about the functioning of a voltage controlled polarizer can be found in the description of the module A-133. In this mode the VCA can be treated also a DC coupled ring modulator (similar to A-114).

The VCA of the A-147-2 has three sockets available: "In" (signal input), "Out" (signal output) and "CV" (control voltage input).

The Triangle Output of the LFO is normalled to the VCA signal input by means of the switching contact of the "VCA In" socket. If another LFO waveform (or any other signal) should be processed by the VCA the corresponding signal has to be patched to the "VCA In" socket. The VCA can be used also independently from the LFO and the Delay CV. In this case the VCA sockets In, Out and CV have to be patched accordingly. The VCA can be used also as waveshaper for the LFO signals (e.g. by patching VCA In and VCA CV to different LFO signals, if necessary via attenuator A-183-1 or offset generator/attenuator A-183-2).

Attack/Delay: The third sub-unit of the module is a simple, voltage controlled envelope generator that has only the parameter "Delay" (or Attack) available. This unit generates a linear increasing voltage that starts from 0V after each Delay Reset until it reaches about +5V. Then the voltage remains at +5V until the next Delay Reset occurs. The inclination or gradient is controlled by the manual Delay control and the Delay control voltage ("Delay CV" input). The waveform is linear, the control scale is exponential. The output voltage is displayed by a green LED and available at the "Delay Out" socket.

The manual Delay control ranges - without external "Delay CV" - from about 5ms (fully CW) up to 2 minutes (fully CCW). By means of an external voltage applied to the "Delay CV" socket this range can be extended. A rising CV shortens the delay time (behaviour like a VCO)!

The Delay output voltage ranges from about 0V to +5V. The rising edge of the gate, clock or trigger signal applied to the "Delay Reset" sockets resets the Delay output voltage to 0 V.

"Delay Out" is normalled to the VCA CV input by means of the switching contact of the "VCA CV" socket and consequently controls the Triangle level provided that no other patch is made. A typical example is the usage of a Gate signal (e.g. from a USB/Midi-to-CV/Gate interface) as Delay Reset. That way a delayed vibrato or tremolo can be realized if the VCA output is patched to the frequency CV input of a VCO (or VCF), or the CV input of a VCA.
Read more
 1 in stock $120.88
Click for better price!
quote 671585
Cat: 577769 Rel: 29 Nov 17
 
Standard VCO providing two CV inputs for pitch, an octave switch, four waveforms with separate outputs, pulse width modulation & hard sync - 10HP
Notes: Module A-110-1 is a voltage-controlled oscillator. This VCO's frequency range is about eight octaves (ca. 15Hz ... 8kHz). It can produce four waveforms simultaneously: rectangle, sawtooth, triangle, and sine wave (triangle and sine shapes are not perfect, see remark below). The output levels are typically 8Vpp for saw and rectangle, and 10Vpp for triangle and sine. The frequency or pitch of the VCO is determined by the position of the octave (Range) switch and tuning (Tune) knob, and by the voltage present at the CV inputs. Frequency modulation (FM) of the VCO is therefore a possibility. Footage (the octave of the fundamental) is set by the Range control in five steps, and Fine tuning controlled by the Tune knob by about +/-1 one semitone (can be modified for a wider range).

You can control the pulse width of the square wave either by hand, or by voltage control - Pulse Width Modulation or PWM.

For more detailed information please look at the user's manual A110_man.pdf. In addition, the A-110 service manual is available as an example for the A-100 service manual that is available at extra charges. This document describes also how to modify the sensitivity of the tune control, how to re-adjust the 1V/octave scale and the frequency offset (i.e. the absolute pitch). Such modifications should be carried out by experienced users only!

The core of the A-110-1 is a sawtooth oscillator (in contrast to the A-111-1, which is based on a triangle oscillator). The other waveforms are derived from the sawtooth by internal waveform converters. As the sawtooth reset (i.e. the back-to-zero slope) is not infinite fast but takes a little bit of time the derived waveforms triangle and sine are not perfect! At the top of the waveform they have a small glitch or notch that is caused by the sawtooth reset and cannot be eliminated by the waveform converters. The sine is derived from the triangle by a simple diode-based converter and the sine shape is not perfect (only a rounded triangle).

If a perfect triangle is required, the A-111-1 is recommended. For a perfect sine wave the quadrature LFO/VCO A-143-9 is recommended.
Read more
 2 in stock $142.77
Cat: 692508 Rel: 19 Jun 18
 
Multimode filter based on the filter circuit of the Oberheim Xpander - 12HP
Notes: Module A-106-6 is a multimode filter that is based on the filter circuit of the Oberheim Xpander. The module features 15 different filter types (those filters of the A-107 that were available in the Xpander) with 8 filters available simultaneously. The toggle switch Filter Group is used to switch between 2 filter groups.

These filter types are available:

- 1L (6 dB low pass)
- 2L (12 dB low pass)
- 3L (18 dB low pass)
- 4L (24 dB low pass)
- 1H (6 dB high pass)
- 2H (12 dB high pass)
- 3H (18 dB high pass)
- 2B (6 dB band pass)
- 4B (12 dB bandpass)
- 2N (notch)
- 3A (allpass)
- 2H1L (asymmetrical band pass made of a 12 dB high pass and a 6 dB low pass)
- 3H1L (asymmetrical band pass made of a 18 dB high pass and a 6 dB low pass)
- 2N1L (combination of notch and 6 dB low pass)
- 3A1L (combination of allpass and 6 dB low pass)

The module features voltage-controlled resonance. For filter group 2 (2L, 4L, 2B ...) even self-oscillation is possible.

All standard VCF controls are available: manual filter frequency control Frq, one control voltage input with attenuator (FCV2) and one without attenuator (FCV1, ~ 1 V/octave). In addition, voltage-controlled resonance with manual control (Q) and a CV input with attenuator (QCV) are available.

The circuit is based on a 24dB lowpass filter. The outputs of the four internal filter stages (i.e. the 6, 12, 18 and 24dB outputs) are mixed together with different levels and polarities to obtain 15 different filters. Because of this special circuit the outputs have slightly different levels and noise floor. This is caused by the different internal amplifications and numbers of stages that are required to generate the filter in question. If e.g. a filter is derived by one stage only (e.g. the 6 dB, 12dB, 18dB and 24dB low pass) the noise floor is smaller compared to a filter that is derived by a combination of all four filter stages.
Read more
 3 in stock $132.34
Cat: 692510 Rel: 19 Jun 18
 
Classic Moog voltage-controlled lowpass filter - 12HP
Notes: Module A-108 is a completely new voltage-controlled low pass filter based on the well-known transistor ladder (Moog ladder). The module has internally an 8-stage low pass filter with different slopes available: 6, 12, 18, 24, 30, 36, 42 and 48 dB per octave. In addition, it features a band pass output (i.e. band pass with transistor ladder). In the factory, the 4 low pass outputs of the A-108 are internally connected to the filter stages 6, 12, 24 and 48dB.

Resonance (Emphasis or Q) can be adjusted manually right up to self-oscillation, in which case the filter will behave like a sine wave oscillator. The A-108 features an external feedback input that enables the insertion of additional modules into the feedback path (e.g. VCA for voltage-controlled resonance or phaser/frequency shifter for phase/frequency shifting effects). The socket is normalized and internally connected to the 48dB low pass output if no cable is inserted into the feedback socket.

The frequency can be adjusted manually, or by voltage control. Three CV inputs (CV1, CV2, CV3) are available. CV2 and CV3 are equipped with attenuators.

The filter audio input is very sensitive so that distortion - if desired - is possible even with normal A-100 levels (e.g. VCO output). Self-oscillation will break off at high distortion levels as the internal feedback signal is drown out by the distorted audio signal. This feature may intentionally be used to create new sounds.

In combination with the Voltage Controlled Mixer A-135 and the Morphing Controller A-144 a filter with voltage-controlled slope can be realized (i.e. controlling the slope from 6dB to 48dB via CV).
Read more
 1 in stock $136.51
Cat: 676692 Rel: 18 Jul 18
 
Octal VCA module containing four VCA pairs - 8HP
Notes: A-132-8 is an octal VCA and primarily planned for polyphonic applications. The module contains four VCA pairs. Each pair includes two daisy-chained VCAs. One VCA has a linear control scale, for the second VCA linear or exponential control scale can be chosen by means of jumpers. We decided to provide two VCAs for each voice because usually one VCA is required for loudness envelope and a second one for velocity (or other functions like individual voltage-controlled loudness of each voice, amplitude modulation and so on).

These controls and in/outputs are available:

- Default Gain 1 (GL)
- Default Gain 2 (GX)
- CV Input VCA 1
- CV Input VCA 2
- Audio Input
- Audio Output

In addition, an Audio Sum Output is also available.

The module features two Default Gain controls (GL, GX), that enable the opening of the first VCAs (L) and/or second VCAs (X). For this the controls GL and GX generate two internal control voltages 0...+10V which are connected to the switching contacts of the sockets 1L...4L (control GL) and 1X...4X (control GX). As long as no patch cable is inserted into the socket in question the internal default control voltage (GL or GX) is used to control the corresponding VCA. This is necessary when the VCA in question is not in use (i.e. no external CV available). Otherwise the VCA would close and there would be no output signal even if the other VCA in the chain is open. The controls GL and GX are also useful for testing polyphonic patches (e.g. for tuning the VCOs).

In the factory the CV inputs are adjusted for a CV range 0...+10V - matching to the polyphonic ADSR module A-141-4. But the sensitivity of each CV input can be adjusted by means of a trimming potentiometer to adapt the CVs even to other control voltage ranges.
Read more
 1 in stock $145.89
Click for better price!
quote 676692
Cat: 732851 Rel: 22 Jul 19
 
Compact bucket brigade delay module - 3HP
Notes: Pico BBD is surprisingly great sounding (we were surprised ourselves), full analogue 4092 stage bucket brigade delay module; the smallest BBD in Eurorack. Besides nice and clean flanger and delay effects, at full CW settings of TIME and feedback knobs it can produce extreme sonic artefacts. Tweak knobs and enjoy!
Read more
 2 in stock $131.83
Click for better price!
quote 732851
Cat: 659994 Rel: 06 Oct 17
 
4 channel gate delay module - 8HP
Notes: The Quad Gate Delay is a 4 channel tempo-synced rhythm generator and logic delay. There are 3 switchable time modes: milliseconds, tempo synced (unquantized), and tempo synced (quantized) with additional manual control over each mode as well as CV inputs over channels 1 & 2 (3 & 4 are fixed). The first mode allows for up to 1 second of delay per channel. Tempo synced (unquantized) allows for up to a bar of delay based on the incoming clock. Tempo synced (quantized) mode allows for up to a bar of delay quantized to 1/16 divisions. There are 3 normalling modes. In the first mode all inputs only trigger their own channels. In the second mode the first input will trigger all channels at the same time which allows for multiple taps off a single trigger. The third mode sends the delay output from the current channel into the next channel's input. The mix output combines all 4 channels and sends a short pulse any time one of the outputs goes high.
Read more
 1 in stock $134.44
Cat: 590416 Rel: 09 Nov 15
 
Analog bass drum snythesizer module - 4HP wide
Notes: Introducing the BD808, part of our new series of drum modules that brings analog percussion into the modular synth world, instantly turning your system into a self-contained music machine. Its small size, minimalist design, and modern production methods have allowed us to bring the world's most famous bass drum sound generator back at a very low cost. The real thing is here again.

The BD808 is the Roland TR-808's Bass Drum circuit adapted for use in Eurorack format and tuned to sound like a machine that comes fresh off the original 80's assembly line. The adaptation to modular format has allowed us to add some special features like independent Accent levels, a high-powered gain stage, dual-input pulse-shaper, and extended decay - all without compromising the signature sound of the TR-808.

A widely used technique with TR-808 machines is to run the drum sounds through outboard amplifiers to add gain and then pass the sound through just about anything to generate additional harmonics caused by clipping and distortion. In the BD808, we have already included this high-powered output gain stage capable of producing signals up to 20Vpp, extending from the original palette of sounds and allowing you to get an assorted array of harmonized bass drums ranging from sharp attacks to crushed tones using this simple yet effective technique! On the inputs, we have also designed a dual pulse-shaper circuit so you can trigger your BD808 with Trigger/Gate signals from step sequencers, clock dividers, or any other pulse/clock sources. This saves you the need to shape the pulses sent to the module and ensuring the same stable sound at its peak power, regardless of differences in your pulse source.

All these little, but unique, features make integrating this legendary sound generator into your modular easy, unleashing the power of real analog drums and making those speaker cones shake.
Read more
 2 in stock $113.60
Cat: 590417 Rel: 09 Nov 15
 
Snare drum module made from the TR808's circuit adapted for Eurorack use - 4HP wide
Notes: Introducing the SD808, part of our new series of drum modules that brings analog percussion to the modular synth world, instantly turning your system into a self-contained music machine.

The SD808 is the TR-808's analog snare drum circuit adapted for use in Eurorack modular synthesizer format and was designed to sound like a fresh-out-of-the-box, 1980s TR-808 snare. Adapting the circuit to the modular format has allowed us to add special features like independent accent levels, a high-powered gain stage, a dual-input pulse-shaper, and an adjustable noise source - all without compromising the signature sound of the TR-808 snare drum.

The SD808 sounds tight and extremely snappy because it's analog - the real thing, not samples. The sound is made with three analog sound generators mixed together: two oscillating sine waves and a noise source. The SD808's front panel controls have a lot of sweet spots with sounds that are not just limited to snare drum sounds; it can also create other electronic percussive elements.

The noise source generator in the original TR-808 machines were revised in later production batches, resulting in variations in sound across the production run. The SD808 uses this later, revised circuit to create a snare drum hit that is slightly darker, has more body, and is more realistic. Just like other drums in this series, the SD808 includes a high-powered output gain stage capable of producing signals up to 20Vpp, allowing you to get an array of harmonized snare drums sounds with even tighter attacks. On the inputs, we have designed a dual-input pulse-shaper circuit so you can trigger the SD808 with Trigger/Gate signals from step sequencers, clock dividers, or any other pulse/clock sources. This eliminates the need to shape pulses sent to the module and ensures the same stable sound at peak power, regardless of your pulse source. All these unique features make integrating this legendary sound generator into your modular synth easy, unleashing the power of real analog drums.
Read more
 2 in stock $115.67
Cat: 590419 Rel: 09 Nov 15
 
Hi-hat percussion synth module made from the legendary TR-808's closed & open hi-hat circuits - 8HP wide
Notes: Introducing the HATS808, part of Tiptop Audio's new series of drum modules that bring analog percussion into the modular synth world, instantly turning your system into a self-contained music machine.

The HATS808 is the TR-808's real, analog closed and open hi-hat circuits adapted for use in Eurorack modular synthesizer format and tested to sound just like it did back in the 80's. Adapting to modular foramt has allowed Tiptop Audio to add some special features for each voice, like independent accent levels, a high-powered gain stage, and a dual-input pulse-shaper. Filter Q and VC-Q knobs were added to the main band-pass filter for additional tuning and to allow you to generate crushed tones and self-oscillation at the knob's max position - all without comprimising the signature sound of the TR-808 hi-hats.

The HATS808 sizzling sound is made using six analog square wave oscillators mixed and processed by band-pass filters. This multi-oscillator design is what give the 808 hi-hat sounds their unique metallic character and akes each HATS808 sound slightlty different from one-another. The original "choke" circuitry that makes it sound so dynamic and tight is fully implemented, just like the original, but can also be disabled if needed, by disconnecting the internal connection between the two hats.

Just like the other drums in this series, the HATS808 high-powered output gain stage allows you to further harmonize the sound using distortion and clipping. On each input, there is a dual pulse-shaper circuit so you can trigger your HATS808 with Trigger/Gate signals from step sequencers, clock dividers or any other pulse/clock sources. This eliminates the need to shape pulses sent to the module and ensures the same stable sound at peak power, regardless of your pulse source. All these unique features make integrating this legendary sound generator into your modular synth easy, unleashing the power of real analog drums.
Read more
 1 in stock $147.98
Cat: 595782 Rel: 19 Jan 16
 
Percussion module based on sounds from a classic 909 - 8HP wide
Notes: Tiptop Audio Cymbal 909

The module was designed, tuned and tested to sound like the crash and ride sounds from a 909 fresh off the factory line. The sound circuits use a combination of low-fi 6 bit sound samples that pass through a series of analog elements that provide envelope and filtering to the source sound.
TipTop Audio enhanced the circuits by adding manual and voltage controllable tuning to each voice which result in a wide sound range: from hard industrial sound at the low end to the original crash/ride sounds to brilliant HihHts at high settings.

Like other TipTop drum voices also the Cymbl909 has high output level, allowing you to further enhance the sound by distortion and clipping. Play dynamically with the volume of the drum sounds with the Accent parameter, whose CV input is normalized to the gate input. Which means you just need to turn up the accent knob to play the sound with full punch.

Crash: tune CV input; gate input, normalized to accent CV input; Crash audio output
Ride: tune CV input; gate input, normalized to accent CV input; Ride audio output

60 mA +12V
40 mA -12V
0 mA 5V
8HP
Read more
 2 in stock $144.86
Cat: 717728 Rel: 25 Jan 19
 
Precision calibrated analogue VCA - 4HP
Notes: The Tiptop Audio VCA is a full featured, precision calibrated, analogue Voltage Controlled Amplifier. At its heart is a novel design of a control circuitry - a function that lets you sweep continuously through three different response curves: Logarithmic, Linear, Exponential - giving you all three shapes in a single module. This special control circuitry design by Mr. Osamu Hoshuyama was adopted into the VCA module to make it a great sounding synthesizer VCA with flexibility to address all duties: level control for both audio and CV modulation, gating audio into silence, and amplitude modulation effects.

A VCA, Voltage Controlled Amplifier, sometimes referred to as an audio gate, is an essential module to any Eurorack and no system is complete without one. The concept is an input, an output and a control that sets how much of the input signal passes through to the output.

A great VCA means minimum feedthrough of the control signal bleeding into the passing signal and minimum distortion applied to the passing signal. An excellent audio gate means minimal leakage of signal from IN to OUT when the control tells the VCA to fully close. These are the most critical conditions for a good sounding, good responding VCA and are what the Tiptop Audio design carefully addresses. 2 LED peak indicator lights on the front panel light up with incoming CV or audio signals. While a clipping indicator for audio is expected, clipping of CV is often overlooked and it's included here to visually maintain the full dynamic range of an envelope driving the VCA.

The Tiptop Audio VCA lets you concentrate on creative uses rather than figuring out the module's anomalies. The result is an excellent sounding synthesizer VCA that's a joy to use and pleasing to hear.
Read more
 2 in stock $104.21
Click for better price!
quote 717728
Cat: 646204 Rel: 30 May 17
 
Wave multiplier & sub-octave generator - 12HP
Notes: The Fold Processor is a voltage controlled wave multiplier and sub-octave generator. The circuit is based on a classic diode design that adds odd harmonics by folding the incoming signal, followed by subdivided square waves.

The wave folder creates new waveforms from the standard sine, triangle, sawtooth and square waves, has a dedicated output jack and CV input with an attenuator making it very easy to create beautifully animated folding sounds. Adjustable voltage controlled Inject alters the bias point creating an even wider palette of sounds.

The subdivide generator squares the fold output generating 4 more sounds spaced one octave apart, each with its own gain knob and mixed to the Subdivide output jack. Mixing the four can create anything from discordant square wave swarms to sweet harmonic oscillator stacks, from a stable square version of the folded wave to freaky PLL like glitched slides.

Overall results can sound evil at times and sweet at others, a true multi-faced devil.
Read more
 2 in stock $131.30
Cat: 737267 Rel: 09 Nov 15
 
B-STOCK: Box damaged, product unused & in perfect condition
Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Introducing the SD808, part of our new series of drum modules that brings analog percussion to the modular synth world, instantly turning your system into a self-contained music machine.

The SD808 is the TR-808's analog snare drum circuit adapted for use in Eurorack modular synthesizer format and was designed to sound like a fresh-out-of-the-box, 1980s TR-808 snare. Adapting the circuit to the modular format has allowed us to add special features like independent accent levels, a high-powered gain stage, a dual-input pulse-shaper, and an adjustable noise source - all without compromising the signature sound of the TR-808 snare drum.

The SD808 sounds tight and extremely snappy because it's analog - the real thing, not samples. The sound is made with three analog sound generators mixed together: two oscillating sine waves and a noise source. The SD808's front panel controls have a lot of sweet spots with sounds that are not just limited to snare drum sounds; it can also create other electronic percussive elements.

The noise source generator in the original TR-808 machines were revised in later production batches, resulting in variations in sound across the production run. The SD808 uses this later, revised circuit to create a snare drum hit that is slightly darker, has more body, and is more realistic. Just like other drums in this series, the SD808 includes a high-powered output gain stage capable of producing signals up to 20Vpp, allowing you to get an array of harmonized snare drums sounds with even tighter attacks. On the inputs, we have designed a dual-input pulse-shaper circuit so you can trigger the SD808 with Trigger/Gate signals from step sequencers, clock dividers, or any other pulse/clock sources. This eliminates the need to shape pulses sent to the module and ensures the same stable sound at peak power, regardless of your pulse source. All these unique features make integrating this legendary sound generator into your modular synth easy, unleashing the power of real analog drums.
Read more
 1 in stock $103.31
Tiptop Audio Happy Ending Kit (silver) (modular synth starter kit)
Cat: 590438 Rel: 10 Nov 15
 
Modular starter kit containing rails, rack ears and power supply
Notes: The Happy Ending Kit is an easy way to get everything needed to start a Eurorack modular system.

The Happy Ending Kit includes:
1 x Z-Rails set plus screws to attach to Z-Ears
1 x uZeus 4HP PSU with 2 x flying bus boards
1 x UK 3-pin mains adapter
Read more
 1 in stock $143.82
Cat: 602200 Rel: 04 Apr 16
 
Dual balanced line audio input and balanced line audio output synth module - 24HP wide
Notes: Dual Balanced Line Audio Input and Balanced Line Audio Output

This module allows you to interface your Eurorack modular system to the pro balanced line level world (+4 dBu). You can send and return to rack mount/desktop FX units, patch to external line-level instruments like synths and drum machines, interface to a DAW, and much more.

This module connects to the Audio I/O JACKS module via ribbon cable. The same ribbon cable can be used to connect to the rear-mounted audio jacks of the 7U performance cases
Read more
 8 in stock $103.16
Cat: 739114
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


The uFold is a collaborated design with David G. Dixon.

This is the version II of the original uFold.

We looked very closely at how some of the most loved timbre shaping circuits worked in classic synth modules; Not just in how they were implemented electronically but how they sounded and how efficient they were to get great sounds. it was important that their design was very versatile in range of timbres but still easy to use and with well thought out control ranges.

When combining the Dixie, uVCA, uFade and uFold you can achieve extremely complex palette of sounds with just a few modules!
Read more
 1 in stock $143.82
Cat: 721759 Rel: 19 Dec 14
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Rosie is an output interfacing module with the added functionalities of FX Loop, Crossfader and Auto-Cue system.

It is designed to facilitate live performance on the modular synthesizer by allowing the artist to preview and modify portions of a patch using the Auto-CUE system, while the audience is listening to a different portion of the patch as selected by the crossfader.

Additionally it allows for Stereo processing of all sounds via the FX Loop. The Rosie is suitable for headphone monitoring of the modular system and interfacing the modular system to a recording environment. Internal Level Matching and Limiting w/ overload indication makes it easy to connect the modular system in the studio or on stage.
Read more
 1 in stock $127.10
Cat: 590918 Rel: 26 Oct 15
 
Dual Low Pass Gate synthesiser module - 4HP wide
Notes: The LxD, Low Strike Duo, is a dual-response, two channel, direct-coupled, Low Pass Gate, which utilizes vactrols in order to provide simultaneous control over the Amplitude and Frequency Spectrum of an Input Signal.

It is, in essence, a VCFA (Voltage Controlled Filter Amplifier). Unlike the Optomix, the LxD offers two different filter responses. CH. 1 offers a 12db/ Octave response that is mildly-resonant, while CH. 2 offers a 6bd/ Octave that is non-resonant.

The Output of CH. 1 is normalled to the input of CH. 2. This normalization puts the two channels in series, which is similar to the VCF into VCA arrangement made popular by many monosynths of the 1970's.
Read more
 7 in stock $102.13
Cat: 557490 Rel: 19 Dec 14
 
Synth module to be used for ring modulation, VCA, mixer, signal multiplication, voltage controlled polarization, attenuation and more
Notes: The modDemix features 2 identical direct-coupled balanced modulator circuits that may be used together or independently for Ring Modulation, VCA, Mixer, Signal Multiplication, Voltage Controlled Polarization, Attenuation and more.
Read more
 3 in stock $129.22
Items 1 to 50 of 137 on page 1 of 3
1  2  3  »

Filter

Saved Searches
Save current search
Release Date
Close