Juno Daily

Music and tech news, interviews, features, reviews and more.

Visit Juno Daily

100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices. Visit Juno DJ

preorders
USD
My Language
My Currency
Your wishlist is empty
Items in wishlist:
Recently added:
Loading...
Cart
Your cart is empty
Items in cart:
Subtotal:
Recently added:
Loading...
View cart
Home  All genres  All genres  

Search dance music

Filter

Saved Searches
Release Date
Featured
Options
Items 1 to 50 of 289 on page 1 of 6
1  2  3  4  5  6  »
Zlob Modular Foldiplier Odd/Even Harmonics Generator Module
Zlob Modular Foldiplier Odd/Even Harmonics Generator Module (frequency divider/waveshaper synth module)
Cat: 964623 Rel: 05 Oct 23
 
Odd/even harmonics generator module with feedback - 4HP.
Notes: The Foldiplier is a 4hp odd/even harmonics generator with 2 different oscillating feedback paths. The folding core of the design originates from the odd harmonics (middle)section of the Serge Wave Multiplier. But the Foldiplier adds voltage control over the symmetry and offset as well as a switch for feedback, jumper selectable between, a transistor based oscillating fuzz inspired by the Hemmo Bazz Fuss with a lot more low harmonic content and a passive oscillating half wave rectification circuit with more high harmonic content. When these feedback oscillations mix with an incoming waveform some unpredictable and unique nonlinear timbres can be achieved. The module can also be used as a no-input experimental oscillator with the feedback switch engaged. All diodes in the module are silicon.

The Fold knob controls the amount of times the waveform is folded in on its self (indicated by the red led window below the knob). The C.V. knob below is an attenuator for incoming control voltage corresponding to the Fold jack(indicated by the red led window above the jack, it only responds to positive voltage). So, the Fold knob acts like an initial amount of folding depending on its position. For example, with the Fold knob fully clockwise you can get even more folds with a control voltage in at the Fold jack. The Offset knob controls how much positive DC voltage(0 to 5v, clockwise) or negative(0 to -5v counter clockwise) DC voltage(indicated by the led window above the Offset jack, red for positive, yellow for negative) injected into the waveform via the Symmetry knob. With the Offset knob position at noon(0v) there will little effect from the Symmetry knob. The Offset jack is expecting +5v to -5v with knob position at noon to scan through the positive and negative voltage. The Symmetry knob controls the amount of negative or positive offset voltage(dependent on the Offset knob) mixed with the waveform(indicated by the yellow led window above the Symmetry jack). If positive voltage is mixed with incoming waveform more folds will occur on the positive troughs of the waveform, likewise, when negative voltage is introduced more folds happen on the negative troughs. This part of the circuit can also be broken down by thinking of the Offset as a voltage controlled crossfader swinging between positive and negative voltages into a VCA controlled by the Symmetry knob and jack. When a voltage is present at the Symmetry jack the Symmetry knob becomes an attenuator. The Symmetry jack only responds to positive voltage.

Width: 4hp
Panel Material: Double Sided PCB panel with Classic and Soulless
Reverse Power Protected
Current Consumption: +12v: 40mA, -12v: 35mA
Depth: 47mm or 1.75"
All through-hole build
Ships with M3 black nylon screws
Expandable: No
Read more
 1 in stock $152.51
Click for better price!
or call +44 20 7424 1960
quote 964623
Xaoc Devices Tallin 1956 Dual Discrete Core VC Amp Module (B-STOCK)
Cat: 1000462 Rel: 01 Jan 90
 
B-STOCK: Item refurbished, repaired and in perfect working order.
Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Tallin is a dual voltage controlled amplifier (VCA) with overdrive, offering some unusual control features and a range of attractive tonal characteristics. Each of the two identical channels offers two simultaneously available inputs for voltage control over signal attenuation or gain, with linear and exponential response to CV. Volume control knobs offer manual gain settings ranging from fully closed (-80dB) up to +18dB. A colour LED indicator displays output signal levels. A soft-clip circuit avoids harsh clipping distortion, while a switchable overdrive circuit offers two carefully crafted distortion responses, simulating the sound of classic tube amplifiers.

Since both CV inputs are simultaneously active, they can be jointly exploited within patches featuring more complex volume control that otherwise would require using two traditional VCAs in series. As the signal path is DC-coupled, Tallin can also be used for handling the control voltages.
Read more
out of stock $149.34
Xaoc Devices Poti II 1974 Batumi II Expander Module
Cat: 979277 Rel: 29 Feb 24
 
Expander module for Batumi II - 4HP
Notes: Poti II expander notable features:

- per-channel input and output attenuation for the SINE and ASSGN outputs
- per-channel shape modulation with switchable destination (wave folding, shape switching, PWM)
- stores settings during a power cycle
- LED indication of the discrepancy between the stored setting and current pot position
- 4HP
- +10/-0mA from Batumi II

Read more
 3 in stock $86.25
Click for better price!
or call +44 20 7424 1960
quote 979277
Xaoc Devices Ostrawa 1966 Full Stereo Voltage Controlled Mixing Console Module (B-STOCK)
Cat: 977786 Rel: 01 Jan 90
 
B-STOCK: Box opened, but product is in excellent condition and in perfect working order
Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Very nicely designed mixer module. Four-channel stereo design with CV control of balance and volume, aux sends and extensive chaining options, including the optional Bohumin expander module.

Supplier's Notes:
Ostrawa is a full stereo four-channel voltage controlled mixer featuring a stereo mixing bus, one stereo auxiliary send per channel (switchable between pre and post VCA) with stereo returns, clickless muting, individual level meters, and a super-clean and DC-coupled signal path designed with high-quality VCA and opamp chips.

Xaoc Devices have carefully crafted Ostrawa's voltage control response to achieve what we believe to be the optimal user experience found in a Eurorack mixer. The design features an elaborate control circuit that combines the internal voltages generated by the panel potentiometers with external CV over volume and stereo balance. The result is a natural attenuator response that constrains VCA gain to a usable range while minimizing distortion.

Ostrawa is a sister module to Xaoc devices Praga. It features a very similar response characteristics and similar layout of controls with some functional differences resulting from stereo inputs and limited panel space. Multiple Ostrawa and Praga units may be chained for a custom configurable mixing system. An expander called Bohumin is also available.

Technical details

Eurorack synth compatible
20hp, skiff friendly
Current draw: +180mA/-150mA
Reverse power protection
Read more
out of stock $417.42
Xaoc Devices Odessa 1975 Variable Spectrum Harmonic Cluster Oscillator Module (B-STOCK)
Cat: 1003059 Rel: 01 Jan 90
 
B-STOCK: Item refurbished, repaired and in perfect working order.
Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Additive synthesis oscillator based on the concept of building up harmonics from sine waves. A complex idea nicely executed for ease of use.

Suppliers notes:
Odessa implements the principle of additive synthesis controlled by a set of carefully tailored macro parameters to harness thousands of sinusoidal partials that altogether form the resulting sound.

The interface is kept simple and accessible, so you can easily build rich and full, great sounding timbres of very complex spectra, that can be either harmonic or inharmonic. Even though inharmonic spectra yield non-periodic waveforms, all partials are frequency related to the common fundamental controlled by a V/oct input. The series of harmonics can be squeezed or spread apart, tilt, and pruned by a comb-like frequency response, resulting in a variety of unearthy sounds. Animating the comb response yields radical effects similar to flanging and phasing. Additional, often sought after features are implemented: through-zero linear frequency modulation, and unison detune: up to 5 copies of the sound can be spread apart for a fat and dense cluster of voices.

There are nine parameters, each controlled by a dedicated knob, so the workflow is as smooth and immediate as possible. Furthermore, every parameter has a dedicated CV input, allowing live animation for organic audio effects. Odessa sports two main outputs for banks of harmonic partials that can be further scaled in frequency, as well as an additional output that can either spit out a square wave or a single sinusoid of the fundamental frequency. Interesting spatial effects, crazy modulation feedbacks as well as synchronisation is possible that way.

The hardware is based on a powerful FPGA chip offering massive parallel computing. The synthesized signal is devoid of aliasing through the entire audio range thanks to intrinsically bandlimited algorithm. A simplified spectral analyser helps you to keep a visual track of what is actually happening to the harmonics.

For even more control over Odessa, you can use the Leibniz subsystem (or just the Lipsk) that can be connected to a header at the back of the module.
Read more
MRP:$546.95 SAVE 20%
 1 in stock $437.16
Xaoc Devices Drezno II 1989 Binary Conversion Komputor Module (B-STOCK)
Xaoc Devices Drezno II 1989 Binary Conversion Komputor Module (B-STOCK) (comparator/CV modulation/distortion/frequency divider/logic/quantizer/sample & hold/waveshaper synth module)
Cat: 991891 Rel: 01 Jan 90
 
B-STOCK: Box opened, but product is in excellent condition and in perfect working order
Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Part of Xaoc's Leibniz Binary Subsystem, the updated Drezno ADC/DAC module builds on the original with higher resolution converters, allowing you to use it for pitch quantisation.

Supplier's Notes:
Drezno II is an improved version of the original Drezno module. It is an essential member of the 8-bit Xaoc Devices Leibniz Binary Subsystem. The Leibniz subsystem is a family of modules that operate on 8 binary (two-state, on/off) signals. These signals are arranged as 8 bits of digital data and may represent analogue signals and voltages, or they may be whatever you want them to be (clocks, gates, rhythms, etc.).

Drezno features an ADC (analogue-to-digital-converter) and DAC (digital-to-analogue-converter), allowing it to act as an analog front-end of the system. In other words, Drezno allows one to convert analogue signals and CVs into digital numbers, as well as to obtain analogue signals back from some other digital numbers (or 8 binary signals). Between these two conversions there is a whole universe of digital shenanigans waiting to happen resulting in all kinds of signal transformations and modulations.

Both (ADC and DAC) sections of Drezno can work independently, or they can be linked. Input and output range of analogue signals may be adjusted using Gain and Offset sliders. Individual bit outputs (for the ADC) and inputs (DAC) allow for extensive cross-patching and the creation of complex waveforms and rhythms. A very fast clock (up to 2MHz) at which the conversions are performed may be replaced with any external clock (for each section separately).

Compared to its predecessor, Drezno II uses new converters of much higher resolution which results in much lower noise floor and higher accuracy. The lower bits are much more stable than before. It is easy now to use Drezno for quantizing pitch voltages with accurate results with 128 or 256 semitone steps. Potentiometer ranges are factory calibrated for precise chromatic scale. A new switch on the front panel allows the user to select the calibrated range of 10Vpp or 20Vpp, so that the lowest bit or the second bit correspond to 1 semitone.

Technical details

Eurorack synth compatible
12hp, skiff friendly
Current draw: +80mA/-50mA
Reverse power protection
Read more
MRP:$272.42 SAVE 12%
out of stock $238.87
Xaoc Devices Drezno II 1989 Binary Conversion Komputor Module
Xaoc Devices Drezno II 1989 Binary Conversion Komputor Module (comparator/CV modulation/distortion/frequency divider/logic/quantizer/sample & hold/waveshaper synth module)
Cat: 945630 Rel: 10 Nov 23
 
An improved version of the original Drezno module in 12HP.
Notes: Part of Xaoc's Leibniz Binary Subsystem, the updated Drezno ADC/DAC module builds on the original with higher resolution converters, allowing you to use it for pitch quantisation.

Supplier's Notes:
Drezno II is an improved version of the original Drezno module. It is an essential member of the 8-bit Xaoc Devices Leibniz Binary Subsystem. The Leibniz subsystem is a family of modules that operate on 8 binary (two-state, on/off) signals. These signals are arranged as 8 bits of digital data and may represent analogue signals and voltages, or they may be whatever you want them to be (clocks, gates, rhythms, etc.).

Drezno features an ADC (analogue-to-digital-converter) and DAC (digital-to-analogue-converter), allowing it to act as an analog front-end of the system. In other words, Drezno allows one to convert analogue signals and CVs into digital numbers, as well as to obtain analogue signals back from some other digital numbers (or 8 binary signals). Between these two conversions there is a whole universe of digital shenanigans waiting to happen resulting in all kinds of signal transformations and modulations.

Both (ADC and DAC) sections of Drezno can work independently, or they can be linked. Input and output range of analogue signals may be adjusted using Gain and Offset sliders. Individual bit outputs (for the ADC) and inputs (DAC) allow for extensive cross-patching and the creation of complex waveforms and rhythms. A very fast clock (up to 2MHz) at which the conversions are performed may be replaced with any external clock (for each section separately).

Compared to its predecessor, Drezno II uses new converters of much higher resolution which results in much lower noise floor and higher accuracy. The lower bits are much more stable than before. It is easy now to use Drezno for quantizing pitch voltages with accurate results with 128 or 256 semitone steps. Potentiometer ranges are factory calibrated for precise chromatic scale. A new switch on the front panel allows the user to select the calibrated range of 10Vpp or 20Vpp, so that the lowest bit or the second bit correspond to 1 semitone.

Technical details

Eurorack synth compatible
12hp, skiff friendly
Current draw: +80mA/-50mA
Reverse power protection
Read more
 3 in stock $250.33
Xaoc Devices Bohumin 1966 Mixing Console Commander Module
Cat: 945623 Rel: 10 Oct 23
 
An expander module for the Ostrawa full stereo mixer in 10HP.
Notes: Part of Xaoc's range of modular mixing tools, the Bohumin 1966 is a commander module for Ostrawa stereo mixer modules, adding a second stereo aux bus, voltage control and manual attenuators with clickless mutes

Supplier's notes:
Bohumin [bo'xumin] is an expander for Xoac Deives' Ostrawa full stereo mixer module. By connecting to Bohumin, Ostrawa gains a second full stereo AUX bus with voltage control over the amount of the effect on each channel. Bohumin features manual attenuators for stereo returns of both AUX A and AUX B, as well as four gate inputs for automated clickless muting of each stereo input channel. Please note that Bohumin is not compatible with Ostrawa's sister module Praga. Similarly, Praga's expander Hrad cannot be connected to Ostrawa. However it is possible to chain any combination of Ostrawas and Pragas, and each of them may have its corresponding expander attached.

Technical details

10hp, skiff friendly
Power drawn from Ostrawa: +50mA/-40mA
Read more
$236.65 SAVE 10%
 4 in stock $212.98
Xaoc Devices Batumi II 1974 Quadruple Low Frequency Oscillator Module
Xaoc Devices Batumi II 1974 Quadruple Low Frequency Oscillator Module (digital/LFO/oscillator/quad/random/clock generator/CV modulation module)
Cat: 979276 Rel: 13 Feb 24
 
Quadruple low frequency oscillator module - 10HP
Notes: An updated version of the excellent Batumi quad LFO, version II introduces performance updates plus compatibility with the new Poti II expander. Original Poti I breakout functions are now included in the Batumi II.

Supplier's Notes:
Xaoc Devices presents Batumi II - a greatly improved and enhanced new iteration of the modern day classic that is/was the original Batumi, preserving its layout and form factor. The premise remains the same: four LFO's with individual outputs for sine, assign and rectangle waves. The channels can operate independently or they can be linked - phase shifted, divided or multiplied (new mode alert) with regard to the first channel. Multiple major and minor improvements have been implemented, e.g. when synced to an external clock source, each channel's frequency slider selects a clock division for that channel's outputs.

Xaoc Devices have managed to incorporate the features of the original expander into Batumi II (sync mode switching and assign waveform selection) without changing the size of the module which opened up new possibilities for the new optional expander. The Poti II expander for Batumi II adds multi destination inputs for sine wavefolding, assign output waveform selection or rectangle pulse modulation with the destination set for each channel independently. Poti II also features frequency input attenuation as well as sine and assign output attenuation. All adjustments may be performed separately for each individual channel or for all channels simultaneously.

The Batumi II software has been rewritten from scratch to ensure best performance. The hardware has also been updated to allow for V/oct tracking and stable operation up to audio rates (more powerful CPU, precise, wideband converters, antialiased waveforms).

-4 LFO's
- redesigned from scratch - both the hardware and software
- new waveforms for the assign output (including random)
- new frequency multiplication mode
- all features of the Poti expander incorporated into the main module
- very wide frequency range well into audio rate
- 1V/oct tracking = so can be used as 4 VCO's
- in the Phase/Divide/Mult modes the random waves at the ASGN output follow the values available in the master/A channel
- 10HP
- +90/-50mA
Read more
 2 in stock $272.42
Winterbloom Micronova Power Supply Module Bundle
Cat: 982884 Rel: 05 Jan 24
 
Modular case power supply, bussboard & power supply module included
Notes: The tiny but mighty Eurorack power supply with all the bells and whistles

Micronova is a miniature power supply with a big soul. It can provide up to 18W of power for your modules and multiple units can be easily daisy chained to power larger systems.

This bundle includes:

an assembled Micronova
an assembled Micronova busboard
a Micronova front entry kit

Please note that the front entry requires assembly. It's a delightfully easy kit, but make sure you know what you're getting into!

A suitable AC-DC power adapter is required. We have adapters available for domestic customers. International customers please take a look at the manual for guidance and recommendations.

Check out the manual to get to know Micronova and all of the delightful ways you can integrate it into your case.

100 mm x 30 mm x 13 mm
15-20V, 1.5A
+12V @ 1A
-12V @ 300mA
+5V @ 500mA
Daisy chainable
Busboard included
Front entry kit included
Read more
 1 in stock $171.44
Click for better price!
or call +44 20 7424 1960
quote 982884
Winterbloom Hydrogen 1U Dual 1-To-4 Precision Buffered Multiple Module Winterbloom Hydrogen 1U Dual 1-To-4 Precision Buffered Multiple Module Winterbloom Hydrogen 1U Dual 1-To-4 Precision Buffered Multiple Module
Cat: 982880 Rel: 05 Jan 24
 
Dual 1-to-4 precision buffered multiple module - 14HP
Notes: Precision buffered multiple in 1U format

Hydrogen is a dual 1-to-4 precision buffered multiple. It works exceptionally well with both CV and audio signals and the beautiful blue and red LEDs give you immediate feedback on the signals passing through.

Unlike some other so-called "precision" mults out there, Hydrogen features high-quality, low-offset, low-drift op-amps. You'll have a hard time finding another mult on this level.

The second mult is normalled to the first, so you can operate it as a 1-to-8 multiple if needed. Need more? Check out Hydrogen's big sister Helium.

Dimensions:
14 HP
Available in all 1U formats

Current Draw:
20 mA +12V
20 mA -12V
0 mA 5V
Read more
out of stock $90.45
Winterbloom Helium Triple 1-To-3 Precision Buffered Multiple Module Winterbloom Helium Triple 1-To-3 Precision Buffered Multiple Module Winterbloom Helium Triple 1-To-3 Precision Buffered Multiple Module
Cat: 982879 Rel: 05 Jan 24
 
Triple 1-to-3 precision buffered multiple module - 4HP
Notes: Precision buffered multiple and precision adder

Helium packs a lot of utility into a small package: three 1-to-3 precision buffered multiples and one precision adder. Helium works exceptionally well with both CV and audio signals and the beautiful blue and red LEDs give you immediate feedback on the signals passing through.

Unlike some other so-called "precision" mults & adders out there, Helium features high-quality, low-offset, low-drift op-amps and 0.05% thin film resistors. You'll have a hard time finding another mult on this level.

Each buffered multiple is normalled to the one above it, so you can operate it as a 1-to-9 multiple if needed.

Dimensions
4 HP
25 mm deep

Current Draw
35 mA +12V
35 mA -12V
0 mA 5V
Read more
out of stock $110.43
Winterbloom Castor & Pollux II Dual Juno-Inspired Oscillator Module Winterbloom Castor & Pollux II Dual Juno-Inspired Oscillator Module Winterbloom Castor & Pollux II Dual Juno-Inspired Oscillator Module
Cat: 939094 Rel: 05 Jan 24
 
Dual Juno-inspired oscillator module - 14HP
Notes: A Juno-inspired oscillator module? We're flattered, but credit has to go to Roland for this one. Based on the Juno-106's digitally-controlled analogue oscillators, the Castor & Pollux modernises the 80s design with a built-in LFO and hard sync.

Supplier's Notes:
Twins that dance in and out of phase, never completely together but never fully apart, bound to each other in the infinite universe.

Castor & Pollux is a dual oscillator that echoes back to the legendary Roland Juno but shines with its own unique, massive voice. It contains two digitally-controlled analogue oscillators implemented using a faithfully modernized version of the original Juno 106 design. It builds on the classic '80s sounds of its inspiration by using the second oscillator and internal LFO to layer in thick detuned sounds and harmonically complex hard synced waveforms.

Castor & Pollux II brings a redesigned interface and moves individual waveform outputs to an included expansion. Both versions have the same features and use the same firmware.

14 HP
+12 V @ 100 mA, -12 V @ 35 mA
25 mm deep
2 separate oscillators
7 octave range
9 total outputs with waveform outputs and onboard mixers
Pitch CV input jacks (0 V to 6 V) and pitch knobs (-1 to +1 octave, configurable)
Pulse width CV input jacks and knobs
Hard sync
Hardware chorusing
Internal low-frequency oscillator (LFO)
Read more
out of stock $297.66
Vermona MEX3 meloDICER Expander Module
Cat: 990514 Rel: 02 Jan 24
 
Expander module designed for the meloDICER - 4HP
Notes: The Vermona MEX3 is a midi extension for the meloDICER sequencer and allows the sequencing of synthesizers outside the modular system.

Features:

MIDI output of sequences
Sequences can now be polyphonic with up to three voices
meloDICER can receive MIDI Control Change messages to remotely control all parameters.
All meloDICER controls can send MIDI Control Change messages
Direct synchronisation to a MIDI clock including shuffle conversion (e.g. from a Multiclock)
MeloDICER converts the MIDI real-time messages START, STOP and CONTINUE.
Module width: 4 TE
Power supply via meloDICER

Included in delivery:

MEX3
Connection cable to meloDICER
2 x MIDI cable DIN-3.5mm; 150 cm (Type A)
To use the meloDICER with the MEX3, the latest firmware must be installed. This can be downloaded from the manufacturer's website.
Read more
out of stock $160.92
Vermona Melodicer Stochastic Pattern Generator Module (B-STOCK)
Vermona Melodicer Stochastic Pattern Generator Module (B-STOCK) (sequencer/quantizer/random synth module)
Cat: 988140 Rel: 01 Jan 90
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Excellent Eurorack sequencer based on random chance and evolving patterns. Dial in a series of notes and build melodies, generate and tweak patterns in real time. Huge depth for studio production or live performance.

Supplier's Notes:
The Melodicer from Vermona is a CV/Gate sequencer with an innovative concept; the melody sequencer offers twelve faders for setting the note probability and two dice-(or random) buttons for generating melody and rhythmic structure.
Read more
out of stock $419.68
Verbos Electronics Real World Interface 3-Channel External Processing Module (B-STOCK)
Verbos Electronics Real World Interface 3-Channel External Processing Module (B-STOCK) (controller/dual/stereo/envelope follower/expression/external/oscillator/utility synth module)
Cat: 985258 Rel: 01 Jan 90
 
B-STOCK: Box opened, but product is in excellent condition and in perfect working order
Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Designed to integrate sound sources from outside Eurorack, Verbos's Real World Interface offers three channels including built-in microphones, preamps, envelope followers and a frequency detector.

Supplier's Notes:
The Real World Interface is a 3-channel external processing module intended for connecting with sound sources outside the system. The channels are oriented as vertical channel strips. The left and right channels have a built-in condenser microphone, preamp, envelope follower with variable decay and gate extractor. In addition to a preamp, envelope follower and gate extractor, the centre channel also has an Automatic Gain Control (fixed high ratio compressor), fundamental extractor (tracking lowpass filter), frequency detector and locked oscillator. Internal microphones are useful for introducing electro acoustic room sounds into the modular. Envelope followers can be used to have external signal levels effect parameters such as filter cutoff or level for building dynamics processors. Gate extraction allows external sounds such as metronomes, clicks, claps or room sounds to advance sequencers, trigger sounds or initiate other events. The Frequency Detector can extract the pitch of simple monophonic sounds but is also a semi chaotic CV source in the tradition of such modules since their introduction in the 1960's. The Locked Oscillator plays a sine wave at the same pitch as the input signal.

Size: 18HP
Read more
 1 in stock $560.37
Verbos Electronics Real World Interface 3-Channel External Processing Module
Verbos Electronics Real World Interface 3-Channel External Processing Module (controller/dual/stereo/envelope follower/expression/external/oscillator/utility synth module)
Cat: 945398 Rel: 16 Oct 23
 
A three channel external processing module in 18HP.
Notes: Designed to integrate sound sources from outside Eurorack, Verbos's Real World Interface offers three channels including built-in microphones, preamps, envelope followers and a frequency detector.

Supplier's Notes:
The Real World Interface is a 3-channel external processing module intended for connecting with sound sources outside the system. The channels are oriented as vertical channel strips. The left and right channels have a built-in condenser microphone, preamp, envelope follower with variable decay and gate extractor. In addition to a preamp, envelope follower and gate extractor, the centre channel also has an Automatic Gain Control (fixed high ratio compressor), fundamental extractor (tracking lowpass filter), frequency detector and locked oscillator. Internal microphones are useful for introducing electro acoustic room sounds into the modular. Envelope followers can be used to have external signal levels effect parameters such as filter cutoff or level for building dynamics processors. Gate extraction allows external sounds such as metronomes, clicks, claps or room sounds to advance sequencers, trigger sounds or initiate other events. The Frequency Detector can extract the pitch of simple monophonic sounds but is also a semi chaotic CV source in the tradition of such modules since their introduction in the 1960's. The Locked Oscillator plays a sine wave at the same pitch as the input signal.

Size: 18HP
Read more
 2 in stock $598.48
Click for better price!
or call +44 20 7424 1960
quote 945398
TipTop Audio Vortex ART Wavetable Module
TipTop Audio Vortex ART Wavetable Module (oscillator/digital/dual/stereo module)
Cat: 947139 Rel: 04 Mar 24
 
ART wavetable dual oscillator mono voice source module - 8HP
Notes: An ART wavetable dual oscillator mono voice source that can be used to build polyphonic patches and multi voice patches. It generates its harmonically rich sound using two 80s vintage D/A converters to feed your filters and effect processors. VORTEX comes loaded with dozens of wavetables, plus additional user wavetables can be loaded from the front panel SD card. A detune knob controls the second VCO and adds effects from deep phasing to a sub octave. The position knob and CV input selects waves in the tables and vibrato from LFOs to create FM. Like other ART sound generators a dedicated Gate output manages the voice envelope or any modulation synced to that voice. VORTEX is a great companion to the analog ATX1 and a must for digital synthesist enthusiasts.

Size: 8HP - Depth: 40mm / 1.5"
Power: +12V 80mA / -12V 25mA
Read more
out of stock $244.02
TipTop Audio The Analog Bundle S2: Octopus/3x ATX1/MIXZ/Z2040/Control Path
Cat: 1004146 Rel: 04 Mar 24
 
Bunble include Octopus, 3x ATX1, MIX7, Z2040 & Control Path modules
Notes: A serious bargain for anyone putting together a modular system, TipTop bundle three VCOs and the Octopus controller with their mixer, filter, dual envelopes and VCA. Great value.

Supplier's Notes:
The S2 is a promotional bundle that TipTop is offering to users, providing a 33% savings to get you started with ART. With these bundles, TipTop have included an incredible voice: the big, beefy 3 VCO stack. The bundles come in two options: Bundle S1, which uses the ART V/OCT Quantizer as a controller, and Bundle S2, which uses Octopus as a controller. In addition to the controllers, there are three ATX1 analogue oscillators, MIX7 for mixing them with plenty of headroom, and followed by TipTop's beloved 4-pole Z2040 filter that has been with them since day one; it just sounds so good. Finally, we end up with Control Path dual envelope plus VCA dynamics modules. This special price is time limited and while supplies last.

OCTOPUS is a powerhouse ART controller that takes MIDI in via the USB or DIN connector and outputs 8 ART channels with 8 velocity CV plus 8 drum triggers. Together with the ART oscillators the OCTOPUS provide unprecedented simplicity connecting the modular to your computer sequencers, hardware midi sequencers and keyboards. Each ART channel can play polyphonic notes, monophonic notes or create multi-channel polyphony using an internal voice manager. All together OCTOPUS can play more voices and notes from a single controller than ever was possible in modular. Using ART high speed control signals OCTOPUS can maintain low jitter for tight timing. OCTOPUS is TipTop's first ART controller with more to follow, please select between Octopus or ART V/Oct Quantizer to get started with ART. Please note, OCTOPUS is not a 1V/Oct midi to CV and should not be confused as one.

Size: 18HP - Depth: 40mm / 1.5"
Power: +12V 140mA / -12V 100mA

ATX1: a classic all analogue saw VCO core with 3 switchable modes, ART, 1V/Oct, LFO and is recommended as the basic building block for ART systems. It is designed for patching analogue polyphonic synths from discrete modules or multi-mono patches in ART mode. When using ART the ATX1 takes care of the tuning including accounting for temperature changes. In 1V/Oct mode the ATX1 runs as a standard old school modular VCO. LFO mode drops the frequency range and is great for patching vibrato to other ATX1s among other things. The ATX1 outputs variable waveshapes with manual or CV control. Classic FM, PWM and hard sync are provided. A dedicated Gate Out in ART mode manages the voice envelopes or any modulation synced to that voice. TipTop consider the ATX1 the best sounding analogue VCO they have ever created.

Size: 8HP - Depth: 40mm / 1.5"
Power: +12V 105mA / -12V 33mA

MIX7 is a seven channel analogue summing mixer module for Eurorack. It is designed for summing any of the different types of signals you'll find in a modular system: Audio, CV, Triggers, or Gate.

MIX7 gives ability to sweeten your mix with more headroom using the power of low noise analogue summing. A compact 3HP Eurorack utility module, MIX7 is an attractive mixing addition to any rig, especially with the ability to also combine rhythms, note patterns or CV automations from different control sources. The main output of one section can be connected to the input of another MIX7 to create larger mixing groups and complex signal routes inside your modular.

The MIX7 summing mixing circuit is built with low-noise operational amplifiers, giving it an excellent sound quality for mixing audio, the beautiful texture of classic analogue mixing with plenty of headroom to handle hot modular signals, and the versatility to sum non-audio signals in your system to open up new creative possibilities.
Each input is labelled with a number of dots, 1-7, yellow for input and green for output. The module matches Tiptop's system look with clean white faceplate styling.

At the back of the module is a user-configurable jumper allowing users to configure the MIX7 for either unity gain (OUT = IN) or give increased headroom (OUT = 0.4IN) for use with hot audio signals, which makes it a great pairing for Tiptop Audio percussive modules. A peak indicator light on the front panel warns the user of even the slightest audio clipping in the mix, helping to keep all the incoming sound sources at their full original quality.

Size: 3HP - Depth: 43mm - Power: +12V 25ma / -12V 20ma

CONTROL PATH is an all in one voice dynamics module that helps build full voices quickly. It contains two analogue envelopes with velocity cv, and one VCA. In a typical voice patch the left envelope will control a filter and the right envelope will be the voice VCA. Velocity control is provided for each envelope and delay front panel trimmers are used to compensate for any miss match between incoming gate signal and velocity CV timings. Envelope cv outs are 0-5V, Velocity cv ins are 0-5V.
Size: 8HP - Depth: 40mm / 1.5"

Power: +12V 50mA / -12V 55mA

The Z2040 is TipTop#s redesign of the most famous analog filter from the polysynths of the 80's and features Tiptop Audio's signature lush, big, and creamy sound. Its frequency sweeps make thick bass lines and leads with great dynamics. When modulated with audio frequencies through its various inputs, the Z2040 gets quite colorful and is capable of creating many new sounds and textures as the forces of the incoming waves and their harmonics blend through the filter's non-linear circuit. When set with Resonance feedback fully up, the Z2040 transforms into a pure sine-core VC-Oscillator, great for making snappy percussive elements and whistling sounds.

A look under the hood will find that the heart of the Z2040 is a discrete design 4-pole low pass filter with a core similar to that of the SSM2040 filter chip, used in the 80's Prophet 5 Rev 2 synthesizer, and its brother the SSM2044, used in the famous early EMU samplers and PPG synthesizers of the 80's. Both filters are considered by many to be, "the best sounding filter ever".

The Z2040's four modulation inputs are built to handle CV and audio signals, enabling deep modulation of the filter core and passing signals. A VC resonance input is provided to modulate and even clip the sine wave produced by the filter feedback loop. A Frequency Modulation input (FM) provides dynamic filter sweeps and the unique VC-FM index allows modulation of the incoming FM signals. On top of that, the Z2040 comes with an audio VCA that can be configured to act upon the input or the output of the filter.

Size: 8HP - Depth: 42mm - Power: +12V 20ma / -12V 20ma
Read more
 1 in stock $998.19
Click for better price!
or call +44 20 7424 1960
quote 1004146
TipTop Audio The Analog Bundle S1: ART V/OCT CV To ART Converter/3x ATX1/MIX7/Z2040/Control Path Modules
Cat: 1004144 Rel: 04 Mar 24
 
Bundle includes ART V/OCT CV To ART Converter, 3x ATX1, MIX7, Z2040 & Control Path Modules
Notes: The S1 is a promotional bundle that Tiptop Audio is offering to users, providing a 33% savings to get you started with ART. With these bundles, this incredible voice is included: the big, beefy 3 VCO stack. The bundles come in two options: Bundle S1, which uses the ART V/OCT Quantizer as a controller, and Bundle S2, which uses Octopus as a controller. In addition to the controllers, there are three ATX1 analogue oscillators, MIX7 for mixing them with plenty of headroom, and followed by the beloved 4-pole Z2040 filter that has been with TipTop since day one; it just sounds so good. Finally, we end up with Control Path dual envelope plus VCA dynamics modules. This special price is time limited and while supplies last.

ART QUAD QUANTIZER is a four channel CV to ART Quantizer to play ART oscillators from CV sequencers, LFOs and anything that outputs CV. This is Tiptop's second ART controller option and is designed for those of us playing ART without a computer or MIDI source. The inputs take in positive, negative, bipolar CV voltages. Scales include Major Minor and the five other modes (Dorian, Lydian, etc). The module is simple to set up with a simple menu and one knob with switch for navigation. The 4th channel can be set to generate Chords and polyphonic note streams for ART Polyphonic oscillators.

Size: 8HP - Depth: 40mm / 1.5"
Power: +12V 38mA / -12V 4mA

ATX1: a classic all analogue saw VCO core with 3 switchable modes, ART, 1V/Oct, LFO and is recommended as the basic building block for ART systems. It is designed for patching analogue polyphonic synths from discrete modules or multi-mono patches in ART mode. When using ART the ATX1 takes care of the tuning including accounting for temperature changes. In 1V/Oct mode the ATX1 runs as a standard old school modular VCO. LFO mode drops the frequency range and is great for patching vibrato to other ATX1s among other things. The ATX1 outputs variable waveshapes with manual or CV control. Classic FM, PWM and hard sync are provided. A dedicated Gate Out in ART mode manages the voice envelopes or any modulation synced to that voice. TipTop consider the ATX1 the best sounding analogue VCO they have ever created.

Size: 8HP - Depth: 40mm / 1.5"
Power: +12V 105mA / -12V 33mA

MIX7 is a seven channel analogue summing mixer module for Eurorack. It is designed for summing any of the different types of signals you'll find in a modular system: Audio, CV, Triggers, or Gate.

MIX7 gives ability to sweeten your mix with more headroom using the power of low noise analogue summing. A compact 3HP Eurorack utility module, MIX7 is an attractive mixing addition to any rig, especially with the ability to also combine rhythms, note patterns or CV automations from different control sources. The main output of one section can be connected to the input of another MIX7 to create larger mixing groups and complex signal routes inside your modular.

The MIX7 summing mixing circuit is built with low-noise operational amplifiers, giving it an excellent sound quality for mixing audio, the beautiful texture of classic analogue mixing with plenty of headroom to handle hot modular signals, and the versatility to sum non-audio signals in your system to open up new creative possibilities.

Each input is labelled with a number of dots, 1-7, yellow for input and green for output. The module matches Tiptop's system look with clean white faceplate styling.

At the back of the module is a user-configurable jumper allowing users to configure the MIX7 for either unity gain (OUT = IN) or give increased headroom (OUT = 0.4IN) for use with hot audio signals, which makes it a great pairing for Tiptop Audio percussive modules. A peak indicator light on the front panel warns the user of even the slightest audio clipping in the mix, helping to keep all the incoming sound sources at their full original quality.

Size: 3HP - Depth: 43mm - Power: +12V 25ma / -12V 20ma

CONTROL PATH is an all in one voice dynamics module that helps build full voices quickly. It contains two analogue envelopes with velocity cv, and one VCA. In a typical voice patch the left envelope will control a filter and the right envelope will be the voice VCA. Velocity control is provided for each envelope and delay front panel trimmers are used to compensate for any miss match between incoming gate signal and velocity CV timings. Envelope cv outs are 0-5V, Velocity cv ins are 0-5V.

Size: 8HP - Depth: 40mm / 1.5"
Power: +12V 50mA / -12V 55mA

The Z2040 is TipTop's redesign of the most famous analogue filter from the polysynths of the 80's and features Tiptop Audio's signature lush, big, and creamy sound. Its frequency sweeps make thick bass lines and leads with great dynamics. When modulated with audio frequencies through its various inputs, the Z2040 gets quite colourful and is capable of creating many new sounds and textures as the forces of the incoming waves and their harmonics blend through the filter's non-linear circuit. When set with Resonance feedback fully up, the Z2040 transforms into a pure sine-core VC-Oscillator, great for making snappy percussive elements and whistling sounds.

A look under the hood will find that the heart of the Z2040 is a discrete design 4-pole low pass filter with a core similar to that of the SSM2040 filter chip, used in the 80's Prophet 5 Rev 2 synthesizer, and its brother the SSM2044, used in the famous early EMU samplers and PPG synthesizers of the 80's. Both filters are considered by many to be, "the best sounding filter ever".

The Z2040's four modulation inputs are built to handle CV and audio signals, enabling deep modulation of the filter core and passing signals. A VC resonance input is provided to modulate and even clip the sine wave produced by the filter feedback loop. A Frequency Modulation input (FM) provides dynamic filter sweeps and the unique VC-FM index allows modulation of the incoming FM signals. On top of that, the Z2040 comes with an audio VCA that can be configured to act upon the input or the output of the filter.

Size: 8HP - Depth: 42mm - Power: +12V 20ma / -12V 20ma
Read more
 1 in stock $945.60
Click for better price!
or call +44 20 7424 1960
quote 1004144
TipTop Audio Octopus USB/MIDI To ART Interface & Voice Manager Module
Cat: 947146 Rel: 04 Mar 24
 
USB/MIDI to ART interface & voice manager module - 18HP
Notes: OCTOPUS is a powerhouse ART controller that takes MIDI in via the USB or DIN connector and outputs 8 ART channels with 8 velocity CV plus 8 drum triggers. Together with the ART oscillators the OCTOPUS provide unprecedented simplicity connecting the modular to your computer sequencers, hardware midi sequencers and keyboards. Each ART channel can play polyphonic notes, monophonic notes or create multi-channel polyphony using an internal voice manager. All together OCTOPUS can play more voices and notes from a single controller than ever was possible in modular. Using ART high speed control signals OCTOPUS can maintain low jitter for tight timing.

Please note, OCTOPUS is not a 1V/Oct midi to CV and should not be confused as one.

Size: 18HP - Depth: 40mm / 1.5"
Power: +12V 140mA / -12V 100mA
Read more
 1 in stock $343.94
Click for better price!
or call +44 20 7424 1960
quote 947146
TipTop Audio MIX7 7-Channel Analogue Summing Mixer Module (black)
Cat: 974817 Rel: 13 Oct 23
 
7-channel analogue summing mixer module - 3HP
Notes: MIX7 is a seven channel analogue summing mixer module for Eurorack. It is designed for summing any of the different types of signals you'll find in a modular system: Audio, CV, Triggers, or Gate.

MIX7 gives ability to sweeten your mix with more headroom using the power of low noise analog summing. A compact 3HP Eurorack utility module, MIX7 is an attractive mixing addition to any rig, especially with the ability to also combine rhythms, note patterns or CV automations from different control sources. The main output of one section can be connected to the input of another MIX7 to create larger mixing groups and complex signal routes inside your modular.

The MIX7 summing mixing circuit is built with low-noise operational amplifiers, giving it an excellent sound quality for mixing audio, the beautiful texture of classic analog mixing with plenty of headroom to handle hot modular signals, and the versatility to sum non-audio signals in your system to open up new creative possibilities.

Each input is labeled with a number of dots, 1-7, yellow for input and green for output. The module matches Tiptop's system look with clean white faceplate styling.

At the back of the module is a user-configurable jumper allowing users to configure the MIX7 for either unity gain (OUT = IN) or give increased headroom (OUT = 0.4IN) for use with hot audio signals, which makes it a great pairing for Tiptop Audio percussive modules. A peak indicator light on the front panel warns the user of even the slightest audio clipping in the mix, helping to keep all the incoming sound sources at their full original quality.

Dimensions:
3 HP
43 mm deep

Current draw:
25 mA +12V
20 mA -12V
Read more
MRP:$103.08 SAVE 10%
 1 in stock $92.56
Click for better price!
or call +44 20 7424 1960
quote 974817
TipTop Audio Forbidden Planet Analogue Filter Module (white) (B-STOCK)
Cat: 978013 Rel: 01 Jan 90
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Welcome to the Forbidden Planet, an all analogue multi-mode filter design influenced by the 1975 Steiner-Parker Synthacon model. Control the Forbidden Planet manually or through CV and take the sound of your Eurorack into new orbits.

Forbidden Planet has three filter input jacks: High Pass, Low Pass and Band Pass. The High Pass section is this module's signature sound - a crisp sharp-cut with no residue, designed to add High Pass filtering capability to Tiptop Audio's wide range of Eurorack modules. Send a throbbing kick drum through the High Pass section and filter out the rumbling lows while maintaining the pulse of the beat. The Bandpass is clear and useful in isolating a pie-slice-range-of-frequencies while cutting off the low and highs, great for accurate sound design or sculpting audio into that sweet spot. The Low Pass is an airy classic 12db two-pole analogue slope ideal for monophonic synth patches and filtering down to the essential low-end bass we all love.

The Forbidden Planet Resonance utilizes an internal feedback path which can sound smooth or aggressive depending on the knob setting. At a low setting, it emphasizes the cut-off harmonics, at middle settings it begins to self-oscillate, and towards maximum setting it forms interesting tones and all sorts of chopped grainy bits of self-oscillation perfect for entering into a sci-fi world.

The Forbidden Planet is an impressive multi-mode analogue filter which adds a broader filter spectrum to the Tiptop Audio modular family and unlocks forbidden creative possibilities in a small package.
Read more
MRP:$128.32 SAVE 14%
 1 in stock $110.44
TipTop Audio Control Path Voice Dynamics Module
TipTop Audio Control Path Voice Dynamics Module (dynamics/envelope generator/VCA module)
Cat: 947138 Rel: 04 Mar 24
 
Voice dynamics module - 8HP
Notes: CONTROL PATH is an all in one voice dynamics module that helps build full voices quickly. It contains two analogue envelopes with velocity cv, and one VCA. In a typical voice patch the left envelope will control a filter and the right envelope will be the voice VCA. Velocity control is provided for each envelope and delay front panel trimmers are used to compensate for any miss match between incoming gate signal and velocity CV timings. Envelope cv outs are 0-5V, Velocity cv ins are 0-5V.

Size: 8HP - Depth: 40mm / 1.5"
Power: +12V 50mA / -12V 55mA
Read more
 1 in stock $158.57
Click for better price!
or call +44 20 7424 1960
quote 947138
TipTop Audio ATX1 VCO ART Analogue VCO Module
Cat: 947141 Rel: 04 Mar 24
 
Analogue voltage controlled oscillator module - 8HP
Notes: A classic all analogue saw VCO core with 3 switchable modes, ART, 1V/Oct, LFO and is recommended as the basic building block for ART systems. It is designed for patching analog polyphonic synths from discrete modules or multi-mono patches in ART mode. When using ART the ATX1 takes care of the tuning including accounting for temperature changes. In 1V/Oct mode the ATX1 runs as a standard old school modular VCO. LFO mode drops the frequency range and is great for patching vibrato to other ATX1s among other things. The ATX1 outputs variable waveshapes with manual or CV control. Classic FM, PWM and hard sync are provided. A dedicated Gate Out in ART mode manages the voice envelopes or any modulation synced to that voice. TipTop consider the ATX1 the best sounding analogue VCO they have ever created.

Size: 8HP - Depth: 40mm / 1.5"

Power: +12V 105mA / -12V 33mA
Read more
 1 in stock $224.03
Click for better price!
or call +44 20 7424 1960
quote 947141
TipTop Audio ART V/Oct Quantizer ART Quad Quantizer Module TipTop Audio ART V/Oct Quantizer ART Quad Quantizer Module TipTop Audio ART V/Oct Quantizer ART Quad Quantizer Module TipTop Audio ART V/Oct Quantizer ART Quad Quantizer Module TipTop Audio ART V/Oct Quantizer ART Quad Quantizer Module
Cat: 1004139 Rel: 04 Mar 24
 
4-channel CV to ART quantizer module - 8HP
Notes: ART QUAD QUANTIZER is a four channel CV to ART Quantizer to play ART oscillators from CV sequencers, LFOs and anything that outputs CV. This is TipTop#s second ART controller option and is designed for those of us playing ART without a computer or MIDI source. The inputs take in positive, negative, bipolar CV voltages. Scales include Major Minor and the five other modes (Dorian, Lydian, etc). The module is simple to set up with a simple menu and one knob with switch for navigation. The 4th channel can be set to generate Chords and polyphonic note streams for ART Polyphonic oscillators.

Size: 8HP
Depth: 40mm / 1.5"
Power: +12V 38mA / -12V 4mA
Read more
 1 in stock $253.49
Click for better price!
or call +44 20 7424 1960
quote 1004139
Tesseract Modular XT Remote Extension Modules (2.0m ribbon cables)
Cat: 971883 Rel: 20 Nov 23
 
Two remote extension modules and two 1.0m ribbon cables - 5HP.
Notes: Remote extension module that allows to connect 16 signals (audio, CV, gate or whatever) between large or spread-out cases.

To avoid bleeding, signals are isolated with a ground line between them (both in the ribbon cable and the printed circuit).

The bundle consists in two XT modules and two ribbon cables (1, 1.5 or 2 meters depending on the option selected).

This is a passive module, it does not draw any current.

5 HP
Read more
out of stock $100.19
Tesseract Modular XT Remote Extension Modules (1.5m ribbon cables)
Cat: 971880 Rel: 20 Nov 23
 
Two remote extension modules and two 1.0m ribbon cables - 5HP.
Notes: Remote extension module that allows to connect 16 signals (audio, CV, gate or whatever) between large or spread-out cases.

To avoid bleeding, signals are isolated with a ground line between them (both in the ribbon cable and the printed circuit).

The bundle consists in two XT modules and two ribbon cables (1, 1.5 or 2 meters depending on the option selected).

This is a passive module, it does not draw any current.

5 HP
Read more
out of stock $96.51
Tesseract Modular XT Remote Extension Modules (1.0m ribbon cables)
Cat: 971876 Rel: 17 Nov 23
 
Two remote extension modules and two 1.0m ribbon cables - 5HP.
Notes: Remote extension module that allows to connect 16 signals (audio, CV, gate or whatever) between large or spread-out cases.

To avoid bleeding, signals are isolated with a ground line between them (both in the ribbon cable and the printed circuit).

The bundle consists in two XT modules and two ribbon cables (1, 1.5 or 2 meters depending on the option selected).

This is a passive module, it does not draw any current.

5 HP
Read more
out of stock $90.98
Tesseract Modular Tex Mix 4 Mono Channels Expandable Mixer Module (B-STOCK)
Cat: 982821 Rel: 01 Jan 90
 
B-STOCK: Box damaged, product in perfect working order
Notes: ***B-STOCK: Box damaged, product in perfect working order***


This is a 4 mono channels expansion. Several of these modules can be added to provide more channels. Every channel features:
- Mono input
- Vactrol Gate (plug a CV into the GATE IN to modulate the volume of a channel, just like a classic VCA. When nothing is plugged in the GATE IN, the gate is normalled to fully open)
-SEND A control (switchable PRE/POST, in PRE mode the signal is present regardless to the channel volume control but only if the channel switch is in ON position)
-SEND B control (post-fader)
-PAN control (only affects the master bus)
-VOLUME control (affects the master, cue and POST sends, does not affect PRE-fader send)
-ON/OFF/CUE switch: ON - channel is routed to the master bus
OFF - channel is muted
CUE - channel is routed to the cue bus

13 mA +12V
8 mA -12V
Read more
out of stock $86.25
Tesseract Modular Stonk Joystick Controller & Looper Module
Tesseract Modular Stonk Joystick Controller & Looper Module (controller/CV modulation/effect/looper synth module)
Cat: 971886 Rel: 17 Nov 23
 
Joystick controller module with 2 channels of CV and 2 channels of audio - 12HP.
Notes: Stonk it's a joystick controller with 2 channels of CV and 2 of audio. It's a CV generator, looper & audio processor.

Very hands on module which can be a chaos pad or DJ looper.

Features:

2 audio in & out (AC coupled)
2 CV in & out (DC coupled) i5V
2 extra CV outputs +/-10V
12 illuminated push buttons
CV & Audio looper (2:30 per channel)
LFO
Euclidean envelope generator
Multimode Filter
Stereo Reverb
Wave
VCA

The audio AD/DA is 24 bit, 48 KHz, the internal audio handle is 32 bit float.

The CV AD/DA is 16/12 bits, 12 KHz.

The extra CV outputs are the analogue sum and difference of the CV outputs 1 & 2.

Each channel has 6 modes available. By default 2 parameters are assigned to the horizontal & vertical axes but this can be easily tweaked, so it's possible to control any of them (frequency, symmetry, offset or amplitude of the LFO, for example) not only with the joystick but with the 2 CV inputs.

The polarity control & offset of every parameter can also be modified on every mode and every channel.

6 presets for store and recall not only the joystick assignment and settings but all the parameter values for all modes and channels.

Size 12 HP
mA +12V
mA -12V
Read more
out of stock $271.36
Tesseract Modular GESS Gate Expander For Sweet Sixteen Mk2 Module (B-STOCK)
Cat: 985271 Rel: 01 Jan 90
 
B-STOCK: Without original box, product in perfect working order
Notes: ***B-STOCK: Without original box, product in perfect working order***


Gate Expander for Sweet Sixteen mkII.

This is an expander, brings 8 gate inputs for the Sweet Sixteen mkII.

The panel is reversible, so jacks & buttons can be in the left or right side.

The orientation of the 10 pin ribbon cable is marked by the 'do not plug power here!' legend on the PCB, so it could be with the red stripe facing that in both GESS and Sweet Sixteen mkII modules.
Read more
out of stock $34.18
Tesseract Modular GESS Gate Expander For Sweet Sixteen Mk2 Module (B-STOCK)
Cat: 985272 Rel: 01 Jan 90
 
B-STOCK: Without original box, product in perfect working order
Notes: ***B-STOCK: Without original box, product in perfect working order***


Gate Expander for Sweet Sixteen mkII.

This is an expander, brings 8 gate inputs for the Sweet Sixteen mkII.

The panel is reversible, so jacks & buttons can be in the left or right side.

The orientation of the 10 pin ribbon cable is marked by the 'do not plug power here!' legend on the PCB, so it could be with the red stripe facing that in both GESS and Sweet Sixteen mkII modules.
Read more
MRP:$31.56 SAVE 10%
 1 in stock $28.39
Teia Synthesizers VCA Team Dual VCA Module With Velocity
Cat: 937642 Rel: 16 Feb 24
 
Dual VCA module - 6HP
Notes: vcA Team is a dual Voltage Controlled Amplifier conceived with dynamic expression control in mind.

With Velocity control over both VCA channels, vcA Team expands the creative use of amplitude variations on your patch, bringing not only control over the contour but also over the loudness of your sound .

Each VCA is coupled with an extra linear VCA cell, for a simple and direct approach to Velocity control. The Velocity input can be modulated by the Velocity CV output of your keyboard or any other CV signal on your rack.

Linear or exponential response is available at the flip of a switch and an attenuator-inverter potentiometer is also implemented to attenuate or invert the CV input.

All inputs are DC-coupled, leaving the door open for processing audio signals or control voltage signals.

An additional Mix output sums the two VCA outputs into a single output, turning the vcA Team into a two channel mixer.

Features:

Dual VCA.
Velocity control over both VCA channels.
Linear and Exponential response.
CV input with Attenuator-Inverter.
Mixed output.
DC-coupled inputs.


Specs:

Width: 6HP
Depth: 33mm
Power consumption: 65mA +12 / 65mA -12
Eurorack Format
Doepfer power connection
Read more
Tags: VCA module
out of stock $155.67
Teia Synthesizers VastWave Complex Analogue Oscillator Module
Cat: 937630 Rel: 16 Feb 24
 
Complex analogue oscillator module - 16HP.
Notes: VastWave is a complex analogue Oscillator with advanced waveshaping capabilities that invites new textural and harmonic exploration beyond subtractive synthesis principles.

Crossfading between harmonically rich folded waveforms and waveforms with Odd/Even harmonics, the VastWave waveshaper expands on the Principal Oscillator heritage, bringing an additional set of waveforms with Odd and Even harmonics and a pulse waveform derived from the Waveshaper's Final output stage.

Furthermore the linear FM input has a dedicated VCA for external FM amplitude modulation and an on board linear Glide delivers a more musical approach to this classic feature.

Features:

Voltage controlled complex waveshaping.
Triangle core.
FM input with voltage controlled amplitude for FM amplitude modulation.
On board linear Glide.
Voltage controlled Pulse-width modulation for Pulse and Final Pls waveforms.
Modern temperature and tuning stability.
High Frequency (VCO) or Low Frequency (LFO) operation.
External Timbre input with sine wave normalization if no external source is patched.
Attenuator/inverter knobs on all voltage controlled inputs.
Inverted or double Sawthooth waveform (selectable by jumper).


Specs:

Width: 16HP
Depth: 33mm
Power consumption: ###mA +12 / ###mA -12
Eurorack Format
Doepfer power connection
Read more
 1 in stock $369.18
Click for better price!
or call +44 20 7424 1960
quote 937630
Teia Synthesizers SkipLog Rhythmic Probability Processor Module Teia Synthesizers SkipLog Rhythmic Probability Processor Module
Teia Synthesizers SkipLog Rhythmic Probability Processor Module (clock modulator/drum/logic/looper/sequencer module)
Cat: 996629 Rel: 16 Feb 24
 
Rhythmic probability processor module - 8HP
Notes: SkipLog, a probability processor with sequence capturing and looping features, along a range of other versatile functions waiting to be explored.

SkipLog is a 3-channel rhythmic probability processor designed for inventive rhythmic exploration in modular setups. Introduce unpredictable rhythmic possibilitis to your creative flow.
SkipLog's basic operation is simple: when a trigger or gate is received at one of its three channels' inputs, the same channel’s Probability knob allows you to control the likelihood of these triggers or gates reaching the output. This inputs are internally connected .

SkipLog continuously captures the binary outcomes of its use, storing them for potential sequences. Activate the Loop function to break from pattern creation and loop the recorded sequences. Individual Loop Length knobs for each channel allow adjustment of the loop sizefrom 1 to 16 or 32 steps (as selected on the back), providing evolving rhythmic patterns.

To fine-tune your arrangement, SkipLog introduces functions like Mute for real-time channel silencing, Inv for signal inversion, and Choke for establishing channel priorities. Lastly, the G/T (Gate/Trigger) Mode enables users to specify whether the channel output is a gate or a trigger.

Dimensions
8 HP
33 mm deep

Current Draw
100 mA +12V
22 mA -12V
Read more
 1 in stock $203.53
Click for better price!
or call +44 20 7424 1960
quote 996629
Teia Synthesizers OpticTone Vactrol Filter & VCA Module
Cat: 937614 Rel: 16 Feb 24
 
Vactrol filter & VCA module - 10HP.
Notes: The OpticTone is a combination of a 12dB multi-mode Vactrol Filter and a Vactrol Voltage Controlled Amplifier.

It is a completely original circuit inspired by the singular nature of Vactrols and their fluid and natural character.

The Filter section provides the three fundamental filter types: Lowpass, Bandpass and Highpass.

A Resonance knob with voltage control input is available for improved modulation flexibility. The feedback knob interacts with the Resonance path, tempering it from creamy resonance to wacky self-oscillation.

Filter and VCA run in parallel, both are controlled by the Freq/Amp knob and it's associated voltage-control input. The combination of both signals can be crossfaded with a dedicated knob.

The Freq/Amp is also controlled with direct touch control on the panel via the 3 lines below the knob.

The filter frequency control can be inverted by the Inv Freq switch, providing the possibility to change the filter direction. This feature allows the filter to "close" when the VCA is "opening" or the other way around.

The Ping input allows to generate the well known vactrol filter percussive sounds if a gate or trigger signal is provided. The Ping frequency if controlled by the Freq/Amp knob, ranging from low kicks drums to high pitch bongos.

There is also a Drive knob to take care of your saturation needs. The Overdrive range is wide, from soft textural clipping to heavy distortion.

All voltage controlled inputs have an attenuator-inverter knob.

Features:

Vatrol based 12dB multi-mode Voltage Controlled Filter: Lowpass, Bandpass and Highpass.
Vactrol Based Voltage Controlled Amplifier.
Crossfade between VCF and VCA section.
Voltage controlled Resonance.
Ping Input for percussive sounds generation.
Cutoff Frequency polarity inversion switch. Doesn't change VCA polarity
Overdrive and Feedback controls.
Attenuator/inverter knobs on all voltage controlled inputs
Touch control over Frequency and Amplitude.


Specs:

Width: 10HP
Depth: 33mm
Power consumption: 55mA +12 / 55mA -12
Eurorack Format
Doepfer power connection
Read more
 1 in stock $265.05
Click for better price!
or call +44 20 7424 1960
quote 937614
Teia Synthesizers MapVolt Dual Voltage Processor Module
Cat: 937908 Rel: 16 Feb 24
 
Dual voltage processor module - 6HP
Notes: Designed with versatility in mind, MapVolt is a dual-channel Universal Voltage Processor built for flexibility in handling audio and CV signals.

With only 6hp, Mapvolt is a multipurpose tool for voltage-controlled scaling, inverting, offsetting, subtracting, and mixing functions.

Each channel of MapVolt can operate in either Polarizer or Attenuator mode, allowing manual control via knobs or CV signals. In Polarizer mode, it functions as a Voltage Controlled Attenuator-Inverter, granting control over signal level and polarity. Additionally, it can be used as a Four-Quadrant Multiplier or Ring Modulator for audio signals, with the processor input serving as the carrier signal and the polarizer's CV input acting as the modulator.

In Attenuator mode, MapVolt operates as a VCA, providing control over signal levels. Its VCA CV input range of +5/-5 makes it well-suited for amplitude modulation (AM) with other +/-5V waveforms.

MapVolt is equipped with dedicated Voltage Offset knobs for each channel, which can be controlled via CV. If no input is patched into the Processor input channel, the Voltage Offset knobs can be used as Offset Generators.

With its dedicated mixing stage, MapVolt enables the combination of both channels into a shared output. Furthermore, if one of the processor channels is inverted, it allows for the subtraction of one signal from the other.

Dimensions
6 HP
33 mm deep

Current Draw
65 mA +12V
65 mA -12V
Read more
 1 in stock $155.67
Click for better price!
or call +44 20 7424 1960
quote 937908
Tangible Waves Tube-VU Module
Tangible Waves Tube-VU Module (preamp/tube synth module)
Cat: 967256
 
Tube-VU module.
out of stock $102.29
Tangible Waves AE Module Modulators Multi-Functional Envelope Generator/LFO/Random Module
Cat: 967232 Rel: 15 Feb 24
 
Multi-functional module inclusing envelope generator, LFO and random functions.
Notes: MODULATORS is a multifunctional module offering different kinds of modulation sources in a 1U module. It is designed especially with very small AE systems in mind.

You get:

An AD envelope generator
an LFO with adjustable rate, square wave and triangle/sawtooth output, pulse width knob and CV control
a random CV source working in different modes (stepped, smoothed, quantized)
and a VCA
Read more
out of stock $52.33
Tangible Waves AE Module Kuzmin Filter Module
Cat: 967228 Rel: 19 Feb 24
 
Kuzmin filter module.
Notes: The module was named Kuzmin Filter in the past as a tribute to the developer of the Polivoks, Vladimir Kuzmin. For certain reasons, the module will now be called GRUNGE Filter (due to the sound), with the circuitry remaining unchanged.

The Polivoks was a Russian synth that was produced between 1982 and 1990.This module is the AE version of the filter that gave the Polivoks a unique, rough sound.

Beyond the basic design, this filter offers some additional features:

Two different resonance characteristics, hard and soft
An FM function, that adds the input signal to the modulation of the filter
An optional overdrive for the output, making the sound even more rough and untamed.
Read more
 1 in stock $59.42
Click for better price!
or call +44 20 7424 1960
quote 967228
Tangible Waves AE Modular XMix Signal Mixer & Attenuator Module
Cat: 967508 Rel: 13 Feb 24
 
Signal mixer and attenuator module.
Notes: XMIX is a swiss knife for signal mixing and attenuating, offering four(!) mixers and two attenuators in a 1U module. It is designed especially with very small AE systems in mind.

You get:

A three channel mixer "A" with knobs
a passive mixer "B" with four channels
two four-channel mixers "C" and "D" with full level / one-third-level inputs
two attenuators with seven different attenuation levels

All mixers can be used / switched for audio and CV signals.
Read more
 1 in stock $47.60
Click for better price!
or call +44 20 7424 1960
quote 967508
Tangible Waves AE Modular Wavetables Digital Oscillator Module
Cat: 967495 Rel: 14 Feb 24
 
Digital oscillator module.
Notes: A high-quality digital wavetables oscillator

The WAVETABLES module is a digital oscillator that is based of wavetables, a technique that become popular first with the famous PPG synthesizer. Here, a huge number of digital waveforms can be "scanned", resulting in a morphing between a variety of interesting spectral structures.

The module offers seven different table sets, in each of them an interesting spectral move happens via the WAVE knob. Of course, this can be modulated by an external CV too.

To "fatten" the sound, the DETUNE/SPREAD knob adds a second oscillator with a variable detune up to one octave.

Pitch and wave modulation have an attenuator knob to set the amount of modulation, plus a switch to choose between unipolar (modulation CV is added to the current value) or bipolar (modulation swings above and below the current value).

The table position of the currently played waveform has a visual representation by an LED that changes it's color in the rainbow spectrum.

WAVETABLES is based on a quite powerful processor, the output is 16-bit audio, resulting in a high-quality sound.

This module was developed by Paula Maddox from DOVE audio; known by the excellent synthesizers MODAL 002, MODAL 008 and we are proud and happy that Paula offered to contribute this excellent work for the AE modular product line.
Read more
out of stock $127.80
Tangible Waves AE Modular Trip Trigger Processor Module
Tangible Waves AE Modular Trip Trigger Processor Module (clock generator/sequencer synth module)
Cat: 967255 Rel: 14 Feb 24
 
Trigger processor module.
Notes: It takes incoming triggers and repeats them - you can think of it as a delay module for triggers. The delay time and the number of repeats can be set with a knob and additionally be CV controlled. Beyond of static delay, the delays of one input trigger can be accelerated or decelerated, leading to the rhythm of a bouncing ball. In another mode, the probability of the output triggers can be chosen.

Different output modes change the assignment of the delays to the eight outputs; either, all delayed triggers for one input trigger are on one output, or the delays go through the outputs 1...8. By this, complex events can be triggered.

Finally, the acceleration and the gate time can be CV controlled as well.

The module is "polyphonic" in a sense, that consecutive triggers at the input don't stop currently running trigger outputs from a previous trigger, but mixing them all. Together with variable delay times and acceleration, highly complex trigger patterns can appear on each of the eight outputs.
Read more
out of stock $52.07
Tangible Waves AE Modular TBD Multi-Functional DSP Module
Cat: 967253 Rel: 13 Feb 24
 
Multi-functional digital signal processing module.
Notes: The TBD module is a multifunctional DSP (digital signal processing) module that includes more than 30 different synthesis and audio processing plugins. It is a collaboration project between CTAG Kiel (an academic working group of Kiel University of Applied Sciences), instrumentsofthings.com (who produce this module for Eurorack) and tangiblewaves.

The module looks quite simplistic with it's only three knobs and three buttons, but the power lies in the web based user interface for editing and storing the parameters. For editing, the module is connected via USB to your computer and a small software tool running here is the bridge to the editing of the parameters via your web browser. IMPORTANT TO KNOW: When the editing is done, the module runs autonomously, without a computer!

Up to 10 favourites can be stored on the module and be chosen by the CONFIG button.

Dynamic control of the modules' parameters works via the two CV inputs and two trigger inputs (which are linked to two buttons), and two knobs are also available for live tweaking parameters. The assignment of inputs/knobs to actual parameters is done in the web based user interface.

Please note that the TBD module has mono audio input and output (compared to the Eurorack version which is stereo); plugins that do stereo audio work also in the AE TBD, but only on one channel. ("Why only mono?" you might ask; the limitation to mono is due to licensing agreements to keep the module price in the usual AE range.

The contained plugins are:

Talkbox (Vocoder), MSxxNoise (MS20 filter and Stone Phaser), Antique (Old Record / Tape Effect), Subotnik (Huge Modulations), VctrSyn, SpaceFX, Formantor, Bjorklund, Karpuskl, APCpp, Retroactor, Rompler (sample playback), WTOsc (custom wavetable), Claude (ported MI granular audio processor), BBeats, CStrip, CStripM, EveryTrim, MISVF, TBD03, PolyPad, TBDings (ported MI resonator), TBDaits (Ported MI Macro Oscillator), TBDeeps (ported MI Wavetable Oscillator), DustLoop, Dust, SubSynth, Sine Source, Simple VCA, SDelay, Plate Reverb, Pink Noise, MiVerb, MiVerb2, MiPShift, MiEnsemble, MiChorus, HiHat1, G-Verb, Freeverb, FBDlyLine, EChorus, Progen Reverb, CDelay
Read more
out of stock $130.95
Tangible Waves AE Modular Stomp-IO Effects Send & Return Module (grey)
Cat: 967247 Rel: 16 Feb 24
 
Effects send & return module.
Notes: With the STOMP-IO module, you can integrate guitar effect pedals and similar devices into your AE modular system! For output (send) and input (return) return there is a mono minijack socket; two minijack to 1/4" socket adapters are included as effect pedals usually work with the latter ones. Send and return levels can be controlled with separate knobs.

Read more
 1 in stock $44.97
Click for better price!
or call +44 20 7424 1960
quote 967247
Tangible Waves AE Modular Spring Reverb Complete Set Tangible Waves AE Modular Spring Reverb Complete Set Tangible Waves AE Modular Spring Reverb Complete Set
Tangible Waves AE Modular Spring Reverb Complete Set (effect/reverb synth module+tank/cable)
Cat: 967241 Rel: 19 Feb 24
 
Spring Reverb module with reverb tank and cable.
Notes: Unique, vintage reverb sound.

The SPRINGREVERB module brings the unique sound of this quite old (introduced in the 60's) technique for creating reverbs to the AE modular.

The reverb works by sending the audio signal to a set of 3 springs; at the other end of the springs the sound is picked up by a transducer, converting the mechanical movement of the springs back into an electrical signal. When the audio signal arrives at the end of the springs, the waves are reflected several times; these reflections create the reverb sound.

The spring "tank" (a metal box containing the springs and transducers, size approx. 24 x 9 x 3.5 cm) is connected externally by a cable.

The product contains all components: The module itself, the spring tank and the connection cable.

Note: The sound of a spring reverb is quite unique and has a strong vintage character; if you are looking for a more "clean", natural sounding reverb please take a look at the MULTIFX module.
Read more
 1 in stock $87.57
Click for better price!
or call +44 20 7424 1960
quote 967241
Tangible Waves AE Modular Heartbeat Master Clock Source Module
Cat: 967221 Rel: 16 Feb 24
 
Master clock source module.
Notes: HEARTBEAT is a master clock source for AE modular, with some additional features. The module offers:

Precise BPM setting with an encoder in the range of 30-300 BPM in steps of 0.1 BPM
A graphical display for the tempo and additional info and menu
A big tap button for setting the tempo by tapping it
An illuminated start/stop button
Six independent clock outputs; each of them can be configured by a menu to a time signature between 1/1 to 1/32th plus dotted and triplets.
Inputs for clock, reset and two CV and trigger inputs that can be assigned to different functions

The clock source can be either internal or an external clock (at 1/96th rate which corresponds to MIDI real time control, e.g. the bus clock in the AE generated by the MASTER module)

Read more
out of stock $76.78
Tangible Waves AE Modular Heartbeat Extender Heartbeat's Expander Module
Tangible Waves AE Modular Heartbeat Extender Heartbeat's Expander Module (clock generator/MIDI/utility/expander synth module)
Cat: 967225 Rel: 14 Feb 24
 
Heartbeat's expander module.
Notes: The HEARTBEAT EXTENDER expands the functionality of the HEARTBEAT module. It is connected to the HEARTBEAT module with a small ribbon cable (included) and offers following features:

Six preset buttons to store and recall different tempos with one button press

MIDI in and out sockets with LED indicators: The HEARTBEAT module can follow incoming MIDI timing data (MIDI start/stop/clock) as an additional option; and the current tempo of the HEARTBEAT is sent out as MIDI timing data if it acts as master clock in a complete system - other MIDI devices will follow it's tempo.

A knob that controls either the swing amount or the transition time when changing from one preset to another (known as accelerando/ritardando).

A lock switch, that disable the save button and other functions that could be an issue e.g. in live situations.
Read more
out of stock $52.07
Tangible Waves AE Modular Grains Granular Sound Player/Multi-Purpose Digital Sound Module
Cat: 967218
 
Arduino compatible granular sound player or multi-purpose digital sound module.
out of stock $59.42
Items 1 to 50 of 289 on page 1 of 6
1  2  3  4  5  6  »
Cart subtotal: