Search dance music

Notes: *** Synthesizer comes with a free copy of The Waldorf Edition software, including D Pole Filter Module, PPG Wave 2.V & Attack ***

Waldorf are back in the game. With the Blofeld. this synthesizer offers all the unique qualities that made Waldorf a truly legendary brand.

The engine inside the heavy duty, full metal chassis of the Blofeld delivers the same fat and rich sound that so many Waldorf users worldwide love when they play their Pulse, Q, Q+, Micro Q, Microwave, Microwave II/XT, or even the flagship Wave.

Yes, you've heard it right. The Blofeld is not only capable of producing these warm, organic analog sounds known from the Q synthesizer line, it also sports a wavetable engine like its predecessors with Wave in their names.

This unique synthesis system is based upon the revolutionary PPG Wave synthesizers of the early 80s. So when you listen to the Blofeld for the first time, you will instantly recognize those edgy, hard-hitting and bell-like timbres that have been an integral part of so many world hits from the PPG era on, and become increasingly popular once more.

In fact it is amazing to realize that nowadays this complex technology fits into such a slim and elegant device. And for a price no-one would have imagined a couple of years ago.

Notes: The Neutron Flux 8 Pole Variable Character Filter is a 12hp skiff friendly eurorack filter module with a stereo analog core and digital control over it. The controls are familiar filter module controls (cutoff, bipolar FM, mode, drive) with some added spice and no complexity.

The special stuff is in these controllable features:

Character: This control blends between five vintage influenced classic filter characters: Fat, Crisp, Liquid, Sour and Mean. Coming later in a firmware update, the Neutron Flux will also have two user banks for more specialized filter characters which can be replaced via audio update.

Overdrive: You can switch the drive circuit to have a +20dB boost and have the drive pot to sweep from clean via warm saturation to extremely hard distortion.

Stereo: This control spreads the cutoff between L and R channels and induces drift. This way a mono signal can be split into wide stereo.

Two 4 pole filter cores: These can be run in stereo, mono to stereo or chained as a 8 pole mono filter for almost LPG-like steep slope. Both of them have their own drive circuits so you can have the overdrive stage in the front, in between or both.

The module can be used in many different ways. It can do classic LP/HP/BP filtering. It can self-oscillate in different waveforms. It can provide analog warmth and process something coming out of your DAW. It can act as a stereo distortion. It can spread your mono signal to a wide spatial stereo soundscape. It can do formant stuff and other wild characters. It can do audio-rate deep FM (1V/oct and FM CV's are all analog).

Power consumption: 250mA at +12 V and 100mA at -12 V
Depth: 25mm
HP: 12

Notes: Mono Lancet '15 might be small-sized device, despite it is a bona fide analogue synthesizer.

Two oscillators and a noise generator are the foundation for its sound. Together with the musical lowpass filter and VCA it's capable of producing warm and precious sounds full of character.

Beside its audio qualities Mono Lancet '15 has a dead simple and intuitive user interface. Each parameter has its own control. We are absolutely convinced that you will quickly learn how to realize your sounds with Mono Lancet '15 without thinking about what you do.

Expandable with Modular Dock:
Mono Lancet '15's functionality can even be enhanced using the optional Modular Dock eurorack module. It offers various in- and out-connections to the individual sections of the synthesizer. With just a few additional modules you can multiply the strong sound base of Mono Lancet '15.

Mono Lancet '15 is manufactured in our Elektroakustischen Manufaktur in historical Vogtland. For us it is not only a piece of high-quality analogue technology but rather a musical instrument, handmade with love and passion.

Ships with UK 3-pin power supply.

For audio demos, please visit - http://www.vermona.com/en/products/synthesizer/product/mono-lancet-15/

Notes: Desktop module incarnation of Electrosmith's customisable DSP platform, designed with plenty of audio, MIDI and CV connectivity to allow you to create your own synths, drum machines and sequencers.

Supplier's Notes:
Create a mono-synth, drum machine, or MIDI sequencer with the Field! It works as a great development tool, or handy small-form synth to take with you on the go. Comes with Daisy installed and 9V power adapter.

Notes: *** Version 1.3 features enhancesd drum tracks. ***

Portable hand-held sampler with serious power, originally launched on Kickstarter and now in production. One-touch sampling via a range of inputs, internal sequencer, built-in effects and resampling.

Supplier's Notes:
Easy Sampling

You can easily sample any sounds with the built-in microphone, your microphone or electric guitar connected to the input, or even a USB-connected smartphone or PC/Mac.

You can even sample applying an insert effect. For example, your electric guitar can be added to Distortion or your vocal to Compressor.

Sampled sounds can be quickly assigned to pads with auto-slicing, and can also be edited manually in detail by viewing the waveform display.

Sampled sounds can also be easily matched to the tempo and key of your song.

You can also resample a sequenced phrase of sampled sounds including applied effects.

Flexible Song-making

Each song project has 16 sequential parts called "Scenes". Each Scene has 10 sequencer tracks which can behave in different ways, as described below:

- Loop Track: Sequencer for a looping sample
- Shots Track: Sequencer for a single one-shot sample
- Drum Track: Step sequencer for drums
- Instrument Track: Piano roll type sequencer for musical instruments
- MIDI Track: Piano roll type sequencer for external MIDI equipment

Three additional Global Audio Tracks are available for longer recordings like vocals and external instruments. These tracks can record multiple takes which can be spliced into a final perfect version. Traditional "punch-in" style recording is also supported.

Easily structure a full song by sequencing scenes and setting how many times they repeat before moving to the next scene. You can set the order of scenes via a copy function.

A song can be mixed down through a mastering effect, and be exported to a single audio file or individual audio files (stem files) for each track.

Effortless Music Streaming

You can stream your music in perfect quality with a single USB cable, without any driver installation or troublesome menu settings.

You can livestream your voice and performance in real time while playing along with your song. And they can be controlled with crossfading and mixing with effects.

Massive Sample Libraries

More than 500 high-quality sample sounds are available (for download), so you can start creating a songs right away, even if it's your first time.

Samples you record are stored to the SD card. In Crad Reader mode you can download your recordings, or import new samples from your PC/Mac.

36 types of internal DSP effects can be used as the insert, send, and master effects.

Versatile Connectivity

The SmplTrek can connect to a wide range of audio sources such as, dynamic microphones, electric guitars/bass, synthesizers, and even USB audio sources from PC/MACs or smartphones.

The SmplTrek can output audio via two analog outputs, or digitally via USB for live streaming and direct DAW recording.

It can also synchronize its tempo with other devices using MIDI or audio sync.

Maximum Polyphony:
35 voices
+ LOOP track + SHOT track + DRUM track + INST track: 30 voices
+ GLOBAL audio track: 3 voices (3 mono tracks)
+ USB audio track: 1 voice
+ External source: 1 voice
(DRUM track and INST track have a maximum of 8 voices each track. MIDI track can also output up to 8 notes each track.)

Sampling/Recording:
48kHz-16bit linear
Sampling Time: Maximum sampling time (size) for a single sample is approximately 180 minutes in stereo (2 GB).
Recordable Data: Depend on SD card *SD card sold separately
Data Format: WAV
Resampling, auto-slicing, time-stretching, pitch-changing functions
*SmplITrek requires an SD card for sampling. Supported SD cards are SDHC cards up to 32 GB. (SDXC cards are not supported.)

Sequencer:
Each song project has 16 scenes
1 scene contains 10 sequencer tracks and 3 additional audio tracks
Track Type
Loop Track: Sequencer for a looping sample (Max 10 tracks/project)
Shots Track: Sequencer for a single one-shot sample (Max 10 tracks/project)
Drum Track: Step sequencer for drums (Max 1 track/project)
Instrument Track: Piano roll style sequencer for musical instruments (Max 3 tracks/project)
MIDI Track: Piano roll style sequencer for external MIDI equipment. (Max
10 tracks/project)
Max. number of bars: 128 bars in Scene
Note Length: 1/1~1/32
Various copy functions
Transpose function
Real-time and non-real-time recording
Metronome, pre-count function

Effects: 36 types (Insert, Send, Master Effects)
Pads: 15 velocity-sensitive pads with RGB LEDs
Controllers: Control knob x 5, Directional pad with 2 button controls
Display: 1.5 inch OLED display
Built-in Mic: Mono x 1 (Omni-directional, 94dBSPL)
Built-in Speaker: Mono x 1 (1.5W 4 O)

Connectors:

INPUT L / Guitar (Switchable 10kQ and 1MQ impedance) / Dynamic Mic
[LINE Gain] PAD: -20dB
[Hi-Z Gain] LOW: 0dB, NORMAL: +10dB, HI: +20dB
[MIC Gain] LOW: 0dB, NORMAL: +10dB
INPUT R / Dynamic Microphone
[LINE Gain] PAD: -20dB
[MIC Gain] LOW: 0dB, NORMAL: +28.8dB, HI: +50dB
STEREO LINE OUTPUTS (Max +6.5dBV)
*The above jacks are all balanced 1/4" TRS Jack Connectors
PHONES jack (stereo 3.5mm mini jack type)
USB port (micro USB Type-B)
[USB Audio] USB 2.0 Full Speed, 48kHz-16bit
Input: 2 channels, Output: 2 channels
[USB MIDI]
[Mass Storage Class] USB2.0 High Speed
*For iPhone, Apple Lightning to USB Camera Adapter required separately
MIDI IN connector (5-Pin DIN type)
MIDI OUT connector (5-Pin DIN type)
AUDIO SYNC IN jack (mono 3.5mm mini jack type)
AUDIO SYNC OUT jack (mono 3.5mm mini jack type)
SD card slot
DC IN connector

Power Supply:
DC12V output AC adapter (500mA, Inner Diameter: 2.1mm, Outer Diameter: 5.5mm, Polarity: Centre +)
Ni-MH AA SIZE Rechargeable Battery or Alkaline AA SIZE Dry Battery x 6
(Alkaline dry batteries life: approx. 4 hours)
*Batteries sold separately

Accessories:
AC Adaptor
Warranty
*SD card, USB cable and the other connection cables sold separately

Size and weight

Width: 147mm | approx. 5.8 inch
Depth: 175mm | approx. 7.8 inch
Height: 46mm | approx. 1.8 inch
Weight: 550g | approx.1 lbs 3.5 oz

Notes: Four-channel version of the hugely popular TRM-202 rotary mixer. Solid sound quality with three-band isolator section and two-band EQ per channel. Killer value for money.

Supplier notes:
The 2-channel version of this mixer, the TRM-202 MK3 from Omnitronic, was particularly popular with DJs of electronic music all over the world. With the TRM-402 4-channel rotary mixer, the popular concept is extended by 2 channels: Now nothing hinders a creative 4-deck DJ set or a flying change during a gig. Of course, this version also incorporates the classic features of a rotary mixer in the form of ALPS rotary controls (Blue Velvet RK27) and a 3-band frequency isolator.

Smooth transitions:

The high-quality components of the TRM-402 ensure an appealing sound image. The large rotary knobs of the 4 channels allow the DJ to create very smooth transitions, which are so difficult to set with a conventional mixer (with faders). All channels can be switched between line & phono inputs or sources. A microphone input is also available. The kill characteristic of the isolator ensures the complete elimination of bass, midrange and treble and thus creative mixing.

Recording your own set:

The TRM-402 is equipped with a booth output and a separate volume control. So the use of the mixer in the club is no problem at all. Thanks to the record out, it is also possible to record your own DJ set.

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


Killer value from DJ brand Reloop. Classic SL1200-inspired design with solid build quality, accurate sound reproduction plus modern features like a 50% pitch option and reverse button.

Supplier's notes:
With the RP-7000 MK2, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.

Sturdy Casing Construction:

By using a combination of metal, rubber and synthetic materials, the RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metallic finish.

Balanced S-Shaped Tone Arm with Upgraded Tone Arm Base:

The RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

Dual Start/Stop Buttons, Precise Motor Control and Reverse Function:

As well as the above technical innovations, the RP-7000 MK2 is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.

High-Resolution Pitch Section with Digital Fader:

Using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

High-Quality Connections and Integrated Phono Pre-Amp:

Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

Powerful Motor with Extensive Adjustment Possibilities:

The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 - 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.

Notes: Compact and user-friendly all-in-one production studio from Rode's excellent RodeCaster series. Aimed at podcasters and content creators, the RodeCaster Duo makes it easy to achieve great results.

Supplier's Notes:
The RODECaster Duo is the ultimate compact audio solution for podcasters and content creators. Combining revolutionary features with superior sound quality, endless customisability and unmatched ease of use, the RODECaster Duo is all you will ever need to record incredible audio for your content.

Everything You Need to Sound Spectacular

The RODECaster Duo is the world's most powerful all-in-one audio production solution. Condensing a complete professional broadcast studio into a compact and intuitive console, it gives you everything you need to sound spectacular, whether you're podcasting, streaming or creating any kind of content. Loaded with cutting-edge next-gen features and supercharged by a high-performance quad-core audio engine, this is all you need to produce exceptional content.
Incredible Audio, Incredibly Easy

The RODECaster Duo is incredibly simple to navigate with its large high-definition touchscreen, tactile rotary encoder and broadcast-quality faders giving you hands-on control over every aspect of your sound. Get your project set up in seconds, and with professionally tailored presets and our intuitive VoxLab™ processing editor, you can dial in your perfect sound with the tap of button or twist of a knob. It's never been easier to create amazing content.
Revolutionary Sound

The RODECaster Duo features world-class Revolution Preamps that deliver pristine audio quality with any microphone, instrument, headset or line-level source. Designed from the ground up specifically for the RODECaster series, these ultra-low-noise, high-gain preamps will give you plenty of output while remaining incredibly quiet, eliminating the need for microphone boosters, lifters or external processing

Professional Processing, Powered by APHEX

Craft your sound with studio-quality audio processing powered by one of the most revered names in pro audio: APHEX. On-board is a suite of authentic emulations of legendary hardware audio processors, including the Aural Exciter, Big Bottom and Compellor master compressor/leveller. There is also a studio-quality compressor, noise gate, high-pass filter, de-esser and three-band equaliser for each channel. Sound exceptional every time you hit record.

Super Compact, Highly Portable

The RODECaster Duo is incredibly versatile and powerful, but it's also exceptionally compact and portable. Take your podcast on the road, create content from home or the office or simply liberate some desk space to keep your livestream looking clean.
Customise To Your Creative Flow

No matter what kind of content you're creating, the RODECaster Duo can be configured to perfectly suit your workflow. Assign the eight inputs to any of the physical or virtual faders to suit your setup, customise the effects and processing for each channel, and transform the RODECaster Duo into your own personalised studio.
Take Creative Control with SMART Pads

The RODECaster Duo features six programmable SMART pads that give you huge creative control at your fingertips. Trigger sounds, music beds, or on-the-fly voice effects like reverb, echo, pitch and robot FX, send MIDI commands to external software, activate automated mixer actions like fade-ins and fade-outs, and so much more.

Connect Any Audio Device

No matter what your setup looks like, the RODECaster Duo offers complete flexibility when it comes to connectivity, making it the perfect control centre for your audio productions. It features two USB interfaces for dual computer setups, an MFi-certified USB port that works seamlessly with iOS devices, and you can record ultra-high-quality phone calls or stream audio in high-definition via the advanced Bluetooth connection.

Key Features:

Fully integrated audio production studio for podcasters and content creators
Ultra-low-noise, high-gain Revolution Preamps (-131.5dBV EIN, 76dB gain)
Two high-quality Neutrik combo inputs for connecting microphones, instruments or line-level devices
Seven individually assignable channels with four broadcast-quality physical faders and three virtual faders
Integrated wireless receiver for connecting RODE Series IV wireless devices (including the Wireless GO II and Wireless ME)
High-performance quad-core audio engine
Studio-grade APHEX audio processing and on-board effects
Six fully programmable SMART pads with bank switching
3.5mm TRRS input for connecting headphones and headsets
Dual USB-C interfaces for connecting two computers or mobile devices
Advanced Bluetooth connectivity for high-quality phone call integration
Designed and made in RODE's state-of-the-art facilities in Sydney, Australia

Specifications

Acoustic, Video & Electrical
Frequency Range: Mic Inputs: 20Hz - 20kHz, Monitor Outputs: 20Hz - 20kHz
Microphone Input Impedance: 4KO
Instrument Input Impedance: 1MO
Preamplifier Gain Range: 0 - 76dB
Equivalent Noise: -131.5dBV (A-weighted)
Line Output Maximum Level: 4dBu
Headphone Output Power: 250mW
Power Requirements: USB-C PD (9V, 3A)
Analogue Audio Output Connectivity: 2 x combo jack (mic, instrument, line), 1 x 3.5 TRRS headset jack (I/O)
USB Interface 1: 1 x 2-in/14-out multichannel device, 1 x 2-in/2-out with mix-minus
USB Interface 2: 1 x 2-in/2-out with mix-minus
Bit Depth: 24-bit
Sample Rate: 48kHz
Recording Storage: microSDHC, microSDXC, USB-C removable drive (exFAT - minimum 100MB/s)
Data Transfer: USB 3.0 SD card reader 130MB/s
Network Connectivity: WiFi 802.11g/n/ac 2.4GHz and 5GHz, Ethernet 100/100
Internal Storage (GB): 4GB (SMART pads)
OS Requirements: macOS 10.15 or later, Windows 10 Version 1803 or later, Windows 11

Mehcanical:

Weight (grams): 1131
Dimensions (millimetres): Length: 235, Width: 225, Height: 76

What's in the box:

1 x RODECaster Duo, 1 x USB-C to USB-C cable (1.5m), 1 x power supply

Notes: ***B-STOCK: Box damaged, product unused & in perfect condition***


Second-generation version of Boss's excellent looper gives you five stereo tracks, four simultaneous effects, hands-on control and full MIDI support. Ideal for live use but also a creative studio tool.

Supplier's Notes:
Looping Magic at Your Fingertips

Packed with inspiring tools for on-the-spot music creation, the RC-505mkII brings next-generation power and flexibility to the world's most popular tabletop looper. Elevate your performances with five stereo tracks and four simultaneous Input FX and Track FX, and soar even further with customizable buttons, expanded I/O, increased mixing control, and other enhancements requested by long-time RC-505 users. Built for free-flowing expression on stage and in the studio, the RC-505mkII is a dream machine for beatboxers, vocalists, multi-instrumentalists, and other fearless looping artists.

More to Love

The RC-505mkII retains everything that made the original so loved and adds a wealth of new features to make the looping experience even more creative and free flowing. The faders provide longer throw for finer adjustments, and they also have a more solid feel under the fingers. And each track now has dedicated FX and Track buttons, making it easier to colour and control your loops in the heat of the moment. Undo/redo has also been enhanced with a Mark Back function that lets you instantly jump back to a previous loop state while performing.

Customize Your Workflow

While the original RC-505 was very customizable, the RC-505mkII takes things to the next level with a vast range of user-configurable controls. You can assign various CTL parameters to the FX and Track buttons and trigger them with a press, hold, or double-click. Pressing the Undo/Redo button reveals a secondary layer, doubling your options. Two external control jacks are also available for connecting footswitches or expression pedals, and each has its own dedicated set of parameters. Crave even more? Then tap into the Assign screens to set up 16 different targets for hardware control and MIDI operation.

More Sonic Colours for Inspired Looping

Sonic variations help make loop performances more compelling, and the RC-505mkII provides a greatly expanded FX palette to colour your sounds during recording and playback. There are 49 Input FX and 53 Track FX types to choose from-including powerful new vocal harmony effects-and you can use up to four in each section at once. Going further, groups of four Input FX and Track FX can be stored in four banks for quick recall, along with toggle or momentary button settings for each type. A step sequence function is also available in some FX to automate parameter changes for dynamic real-time movement.

SPECIFICATIONS

Sampling Frequency: 44.1 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point

Recording/Playback
Number of Tracks: 5
Data Format: WAV (44.1 kHz, 32-bit float, stereo)
Maximum Recording Time: Approx. 1.5 hours (1 track), Approx.13 hours (total of All memories)

Rhythm Type: 200 types or greater
Rhythm Kit: 16 types

Effect:
INPUT FX: 49 types
TRACK FX: 53 types
MASTER FX: 2 types
Memory: 99
Nominal Input Level: MIC 1, 2 INPUT: -40 dBu/INST 1, 2 INPUT: -10 dBu
Maximum Input Level: MIC 1, 2 INPUT: 0 dBu/INST 1, 2 INPUT: +7 dBu/+20 dBu (selectable)
Input Impedance: MIC 1, 2 INPUT: 3k ohms/INST 1, 2 INPUT: 1 M ohms/25 k ohms (selectable)
Nominal Output Level: MAIN OUTPUT: -10 dBu/SUB 1, 2 OUTPUT: -10 dBu
Maximum Output Level: MAIN OUTPUT: +7 dBu/SUB 1, 2 OUTPUT: +7 dBu
Output Impedance: MAIN OUTPUT: 1 k ohm/SUB 1, 2 OUTPUT: 1 k ohm
Recommended Load Impedance: MAIN OUTPUT: 10 k ohms or greater/SUB 1, 2 OUTPUT: 10 k ohms or greater

Controls:
TRACK1--5 REC/PLAY button, TRACK1--5 STOP button, TRACK1--5 TRACK button, TRACK1--5 FX button, ALL START/STOP button, UNDO/REDO button, TAP TEMPO button, RHYTHM START/STOP button, RHYTHM EDIT button, INPUT FX A--D button, INPUT FX EDIT button, TRACK FX A--D button, TRACK FX EDIT button, MENU button, LOOP button, ENTER button, EXIT button, PAGE buttons, 1--4 knobs, OUTPUT LEVEL knob, TRACK1--5 LEVEL Faders

Display:
Graphic LCD (128 x 64 dots, backlit LCD)

Connectors:
MIC IN 1, 2 jack: XLR type (balanced, phantom power: DC 48 V, 10 mA Max
INST IN 1, 2 jacks, MAIN OUT jacks, SUB OUT 1, 2 jacks: 1/4-inch phone type
PHONES jack: Stereo 1/4-inch phone type
CTL1,2/EXP1 jack, CTL3,4/EXP2 jack: 1/4-inch TRS phone type
USB port: USB B type
MIDI (IN, OUT) connectors
DC IN jack

Power Supply: AC adaptor
Current Draw: 1.0 A (with phantom power), 0.9 A (without phantom power)
Accessories:

AC adaptor
Owner's Manual
Leaflet "USING THE UNIT SAFELY"

Options (sold separately):
Footswitch: FS-5U
Dual Footswitch: FS-6, FS-7
Expression Pedal: FV-500H, FV-500L, EV-30, Roland EV-5

SIZE AND WEIGHT

Width: 420 mm/16-9/16 inches
Depth: 234 mm/9-1/4 inches
Height: 67 mm/2-11/16 inches
Weight: 1.8 kg/4 lbs

Notes: The Circadian Rhythms is moving modular synthesizer technology another step forward by gluing all the pieces of a system together. Each module or voice can now be programmed to play straight from an intelligent, eight-channel, 512-step master trigger sequencer made for composers looking to make music on the modular. Building on the sequencing concept of step programing multi-channel patterns of musical phrases can be repeated, looped, chained, muted and manipulated on the fly in real-time, and most importantly, all of this is done through a simple, clearly labeled interface. Using an array of multicolor illuminated buttons and innovative grid views provides a highly functional live performance sequencer with a beautiful glowing appearance of the programmed music that will look amazing on stage for both performer and crowd. As a master controller, the heart of the modular synthesizer, Circadian Rhythms generates high precision clock and reset signals for all the other sequencers and devices in the system to align with and can also act as a high precision bridge for DAW synchronization.

Views - Unlike most hardware sequencers that have a single static display of a timeline, Circadian Rhythms offers four different horizontal views of the timeline and two unique vertical views that scale from macro to micro. Switch between viewing 64 steps at once or all 8 channels side by side instantly. Stretch gates over multiple patterns to drive envelopes or use Zoom view to move a single hit back a few milliseconds in time to get the right feel all from the same interface.

LED Grid Built for Quick Access - Built around 72 buttons set as a multi-color illuminated 8x9 array, Circadian Rhythms displays both note data and settings in a clear and precise manner. It takes only one click to switch to vertical view and the grid turns into a set of programming and realtime playing functions like Mutes, Loops, Swing, Fills, Copy and Pate, Grouping, Randomizing, Manual trigger entry drum machine style and many many more. Activate any of those functions with only a button press or two.

Clock - Inside the CR ticks an extremely precise clock with jitter and latency measured in mere microseconds for the ultimate feel of groove. The four modes of clock sync make interfacing with other modules, hardware or software simple. Whether driving a large Eurorack system or synced to a DAW, the groove always remains tight.

SyncBus Technology - The Tiptop Audio designed SyncBus enables the CR to connect to any number of other SyncBus devices with the highest possible level of synchronization. A SyncBus master directly injects its core clock and running status into every connected unit so they work seamlessly as one device. Hook up two CRs to make a 16 channel device or add a Trigger Riot (or three) to the mix for further experimentation. Plus, the connection is done behind the panel so no need to patch anything together.

Under The Hood - When state of the art chip technology, musically driven firmware, and professionally engineered hardware design all come together in one electronic device, the result is a music sequencer with unparalleled specifications. Starting with a powerful, precise sequencing engine that has superb feel for the groove, add internal functions that automatically balance performance and smooth user interface operation, and finish with outstanding low power consumption placing minimal stress on power supplies even at maximum output, Circadian Rhythms has a design focused on the requirements of the most dedicated musicians and composers. Long time pros will immediately feel a machine made for their needs, while the newcomers can instantly dive into next level programming and performance.

Notes: The SAPEL is a random control voltages source for Eurorack modular systems. It is composed of two main sections, one that generates audio noises, in 4 different versions, and another which includes two specular random clock, random voltages and clock sources.

Noise outputs are colour coded, based on the noise colours, and include:

- Blue (+3dB/oct spectrum)
- White noise (0dB/oct spectrum)
- Pink noise (-3dB/oct spectrum)
- Red noise, a.k.a. Brown or Brownian (-6dB/oct spectrum).

The random voltage and clock section features four uncorrelated random CV generation paths, divided in;

- Fluctuating random voltage;
- Quantized random voltage with 2n stages tuned in semitones referred to 1V/oct scale;
- Quantized random voltage with n+1 stages tuned in octaves referred to 1V/oct scale;
- Non quantized sample & hold.

It is also possible to set a probability distribution with a potentiometer, and apply (or do not apply) the chosen distribution setting to each of the four paths independently.

Furthermore, each of the two random sources section features an independent built-in clock generator, with clock output and random clock output, which can be used in "more than" or "less than" mode. It is possible to use an external clock signal as a clock source, bypassing the built-in one. In addition to that, it is also possible to hand trigger the clock via a manual sample & hold button, which can be also modulated by gate signals.

Notes: Stereo Field is one instrument with three uses. It is simultaneously a stereo/quad modular touch plate feedback atonal synthesizer, a stereo/quad audio processor and a pressure sensitive chaotic CV "controller". All three uses are available separately as well as simultaneously and in conversation with each other.

The Stereo Field allows its user to manipulate and patch two analogue stereo preamp circuits via touch plates. By utilizing skin conductivity as new paths for current to follow you are creating "new circuits" and new sounds in relation to where your fingers are patching. The individual touch plates are directly connected to nearly every connection point of every component in its circuitry (located directly under each corresponding touch plate).

When touched with multiple fingers it will create atonal analogue feedback with either of the two mirrored circuits represented by interlocking touch-plate circles. The resulting feedback can go beyond the abilities of human hearing (take caution!) and down to the very slow clicks of a saw waveform and both can often be happening simultaneously. These parallel mirrored circuits can be finger patched separately or together yielding vastly different chaotic results in regards to texture, timbre and stereo imaging. This instrument has the ability to create atonal synth tones in stereo (and quad) as well as process incoming stereo audio (and quad) sources via 1/4" and 3.5mm ins and outs. Incoming audio sources can be "patched" or rewoven into any area of either or both of the circuits via skin contact.

The two stereo input volume knobs (centre) shape and effect distortion, drive amounts, internal feedback pitch, and modulation rates depending on how your fingers are patching. The quad inputs and outputs via the 3.5mm jacks have small touch plates leading to and from allowing for touch access of each of the 4 inputs and 4 outputs. If multiple audio signals are traveling into the Stereo Field these audio sources can be intermingled and can modulate one another, again depending upon where your fingers are patching.

Sending CV signals into the 3.5mm input jacks will open up many more possibilities both in terms of synthesized sounds and audio processing. Since the two stereo circuits are mirror images of one another the 3.5mm ins and outs can also be thought of as (L/R,R/L) and when your hands get involved this imaging will be further confused and jumbled as your skin can intermingle all of these paths.

The Stereo Field can also be used as a controlled chaos source when using the 3.5mm outputs to send the feedback your hands create as CV to your modular system. Due to the nature of feedback and finger patching the 4 available CV signals have the ability to get incredibly complex, organic and textured in nature (see audio examples below in use with a euro-rack system). Because of the open nature of Stereo Field it can both send and receive CV modulation simultaneously. In addition, this can all be happening while your finger patching is changing and altering the incoming and outgoing CV while also processing incoming audio. These ins and outs can also be patched together with cables for sustained tones with the pitch/rhythm/volume/"cutoff" being affected by adjusting the incoming and outgoing volume knobs in various settings. Inter-patching in this way will also allow for sustained pulse beats and filter-esque sound shaping in addition to bringing new results to finger patching via the touch plates.

Most importantly, processed audio and synthesized audio are available simultaneously with the ability to influence and modulate each other. This will often blur the lines between the two; who is manipulating who, who comes out on top as audio and who is modulation? This can be a constantly evolving cycle based upon where the performers fingers are placed and highly sensitive skin contact pressure changes.

Notes: Dtronics DT-1000, A hardware controller for the Roland Boutique D-05 and D-50/D-550

The Dtronics DT-1000 is a hardware controller for the Roland Boutique D-05 and D-50/D-550.

The DT-1000 can also be operated on a vintage Roland D-50 / D-550

Almost every parameter of the Roland D-05 gets its own slider, 10 keys and 56 pots in a nice and solid desktop case.

Some pots are doubly assigned, but can be switched quickly and are very easy to read.

For Roland Boutique D-05 Linear Synthesizer
Also compatible with Roland D-50 and D-550 vintage synthesizers
Direct access to all important parameters of the Roland Boutique D-05
10 Buttons and 56 pots
Robust housing
MIDI input and output
USB

Included in the box:
Dtronics DT-1000
DIN(5) MIDI cable
USB cable


Specifications
Material: high-quality plastic
Height: 44 mm
Width: 300 mm
Depth: 200 mm
Weight: 0.985 gram
DIN cord (DIN5P) is included
Power consumption USB or DIN: 60mA

Notes: ***B-STOCK: Box opened, product in perfect working order***


The Pro VLA II is a tube driven Vactrol-based compressor/leveling amplifier designed to excel in any professional audio environment. Superior performance and an incredible tone makes the Pro VLA II and indispensable tool for tracking, mixing, mastering, dynamic control of live sound sources or for use in broadcast audio.

Capable of delivering a far more musical natural sounding and sonically transparent compression than competitive units in its class, the Pro VLA II uses an Opto-electronic circuit rather than the more typical design VCA driven level detection circuit. This VCA-less design coupled with a 12AT7 vacuum tube in the gain stage makes the Pro-VLA II the ideal dynamic control device for critical audio applications.

Exceptional signal integrity with extremely low noise and low distortion is achieved in the Pro VLA II by utilizing a transformerless design throughout.

Unlike typical compression units that use Voltage Controlled Amplifiers (VCA's) to handle level detection, the Pro VLA II's Opto-electronic design allows a far more transparent and musical sounding compression without sounding aggressive or un-natural. This Vactrol based optical electronic circuitry is the basic component of the classic highly sought after compressors of past.

The Vactrol design allows the Pro VLA II to react to audio signal in much the same way the eye naturally adjusts to fluctuations in light levels, smoothly, quietly and almost imperceptibly.

The Pro VLA II is a soft knee leveling amplifier by design. Although capable of providing dramatic compression effects, the Pro VLA II was designed to excel in any application where transparent, expressively musical dynamics control is desired.

Large highly visible backlit analog VU meters accurately display input and output levels while extremely fast 10-segment LED's display gain reduction. For added functionality, the LED's display either average level for mastering & mixing applications or peak hold for monitoring individual sources when tracking audio.

XLR and 1/4" TRS balanced inputs and outputs are provided to ensure the Pro VLA II can connect with any audio source or hardware. A +4 dBu/-10 dBu mode switch optimizes the Pro VLA II I/O for either consumer or professional equipment.

Notes: Up to eight voices of digitally synthesised drums, percussion and synth sounds from this versatile module, featuring virtual analogue models as well as FM and wavetable options.

Supplier's Notes:
Flame "Fire" percussion synth module

The module is a full 8-way polyphonic drum and percussion synthesizer. It offers different digital synthesis algorithms, which can be distributed over 8 channels. The sound engine delivers virtual analog sounds as well as different digital percussion sounds, which are generated with FM, wavetable or virtual analog synthesis. It is also possible to create sim- ple monophonic bass or synthesizer voices.

During development, particular attention was paid to direct and simple usability with regard to live operation. The hardware essentially consists of two parts (which are deli- vered together). On the one hand there is the basic module with all controls, the display, connections for MIDI, 2x CV inputs and 5 audio outputs.

There is also a separate XFIRE I/O extension with sockets for the 16 analog trigger/gate/CV inputs and 3 additional audio outputs. Both modules are connected via a 60cm long ribbon cable. In this way, the XFIRE module can be installed anywhere else in the rack. The base module is therefore only 22TE wide and can also work alone without the extension as a MIDI expander.

A maximum of 8 audio outputs are available. A stereo pair (outputs 7+8), plus 6 additio- nal individual direct outputs. All outputs are freely configurable. Two pages with settings for panorama and volume are available for the stereo main out.

There is a gate/trigger input and a configurable CV input for each channel. Two additio- nal programmable CV inputs can be used for further controls. Regardless of the analog connection, the module offers full MIDI functionality. Two MIDI inputs and a MIDI output/softthru allow integration into an external MIDI setup. The firmware can be upda- ted via MIDI Sysex. The created KIT data can also be saved or exchanged.

Notes: Excellent Eurorack sequencer based on random chance and evolving patterns. Dial in a series of notes and build melodies, generate and tweak patterns in real time. Huge depth for studio production or live performance.

Supplier's Notes:
The Melodicer from Vermona is a CV/Gate sequencer with an innovative concept; the melody sequencer offers twelve faders for setting the note probability and two dice-(or random) buttons for generating melody and rhythmic structure.

Notes: Record. Mangle. Destroy.

Nebulae is a granular sampler and DSP platform. Its phase vocoder audio engine provides elastic audio, which can be time stretched, granularized, and mangled to no end. With independent control over pitch and speed, and granular controls such as overlap, window, and density, finding new sonic territory is only a knob turn away. Nebulae can use live audio input, a recorded buffer, or audio files as the source material for its powerful audio manipulations. The live input buffer can record up to five minutes of stereo audio at 48kHz, 24 bit. In addition, up to 75 MB of stereo audio can be loaded simultaneously through the USB port. No naming convention or special formatting necessary; just plug and play.

Nebulae lives a double life as an open source DSP platform with an extensive library of off the shelf alternate instruments. You can turn the module into a lush reverb, spectral delay, or tape-style looper simply by loading a new file onto the flash drive. Do you want to tweak one aspect of an existing instrument, even the default functionality? No problem. No prior coding knowledge is necessary to tweak and refine existing firmware to your liking or start with one of our templates. Alternate firmware files can be written with Pure Data, Csound, SuperCollider, and even bare-bones C programs.

Notes: Very nice old-school vocoder for Eurorack, featuring a built-in mic pre-amp and full 10-band patch bay. Internal VCO and straightforward control setup help simplify operation.

Supplier's Notes:
The VXC-2220 is an 10-band analogue vocoder with patch-bay for each individual filter section. VXC-2220 vocoder is based on the iconic classics 222 vocoder. For stand alone usage the VXC-2220 is equipped with an internal oscillator generating saw and pulse waves form C1 to C6. A simple and efficient vocoder.

Specifications

Microphone input for speech signal
Line input for speech signal
Line input for carrier signal
Input level control for speech and carrier signal
Output level control
Line output
10-Band analyzer outputs
10-Band synthesizer input
Internal VCO (1 semi-nut step size);
* Saw wave (C1 - C6)
* 3x 10% Pulse wave (C1+C2+C3 - C4+C5+C6 )
* White noise
- Synthesis for 's' and 't' sounds
- Feed-trough level control for speech and carrier channel
- Bypass switch
- 10pin power connector (+/-12V)

Dimensions:
(36HP) 128,5×182.5mm (depth: ca. 35mm incl. power connector)

Power Consumption:
+12V = 125mA
-12V = -125mA

Notes: Based on the excellent LXR-02 drum machine, the LXR Eurorack module is a percussion all-round, with six voices, trigger inputs and CV modulation, plus the ability to generate synth parts. Versatile.

Supplier's Notes:
LXR eurorack module is a compact and great-sounding percussion synthesizer based on the sound engine of the LXR-02 drum machine. While retaining the core interface of the LXR-02, this module adds the essential eurorack ingredient - assignable CV control over parameters and many more tweaks in the user interface for better integration in any eurorack system

Features

6 drum/percussion voices
7 trigger inputs with accents
5 assignable CV inputs
4 assignable outputs
3 voices can be used as basslines due to 1V/oct tuning
Over 30 adjustable parameters per voice
Insert FX section
Kit memory
SD card for Kit exchange and easy firmware updates
Kits compatible with the LXR-02

Dimensions
28 HP
35 mm deep

Current Draw
88 mA +12V
10 mA -12V
0 mA 5V

Notes: A unique hardware synth, Aodyo's Anyma Phi uses physical modelling mixed with virtual analogue oscillators and filters, creating a versatile setup for sounds from resonant acoustic timbres to experimental hybrid sounds.

Supplier's Notes:
Explore and create your own sounds

Discover Anyma Phi, the essential physical modelling synthesizer. Your portal to creating new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

The best of both worlds

Anyma Phi blends the classic ingredients of electronic music, like oscillators and filters, with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Create Unique Sounds; sound design for all

The matrix provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation: Excite, Vibrate, Resonate, Global, and Animate.

Infinite Possibilities; a semi-modular powerhouse

Beyond the matrix lies an insanely powerful semi-modular synthesis engine where you can harness a wide variety of oscillators and effects, and control them effortlessly using an impressive modulator system. Going so deep into sound design has never been easier before with such a small box!

Anyma Phi Editor; standalone, but well-connected?

The Anyma Phi can hold up to 200 patches, and everything you need to create them is right on the machine. You can also benefit from the large screen of your computer (PC or Mac) to edit, manage and share patches even more easily, in a streamlined environment that displays all the synth modules at once and their interactions in real time. Learn more about the Anyma Phi's Updates and Downloads.

MIDI Controller; In tune with its environment

With its small form factor, it can sit on your keyboard, or anywhere on your desk. You can control it using any MIDI controller, keyboard or sequencer, with first-class support for wind controllers, like Sylphyo. And it also shines with World and microtonal music*!

Just Tap and Scratch; the world is your oyster

With its stereo input, you can also use the Anyma Phi as a versatile effects processor for your other gear, or use any external sound to excite its resonators and other physical models. And you don't even need a mic to get interesting sounds: just tap and scratch directly on the case of the Anyma!

Technical specifications:

Hybrid monophonic synthesizer, with physical modelling components
Memory: 200 patches
Stereo audio outputs:
L-R 1/4" mono line jack outputs
1/4" stereo headphone jack output
Stereo audio inputs:
1/4" stereo jack audio input
Internal piezoelectric mic when external input unplugged
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine:
3 oscillator slots (more than 40 types, including wind/string physical models, modal resonators, virtual analogue and digital algorithms)
5 effect slots (more than 30 types, including resonators, granular processors, and FM operators) along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots (more than 40 types, including envelope generators, LFO, curves, interpolators, slew limiters, sequencers, physical and algorithmic processes, etc.)
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with sidechain input and min/max/curve/smoothing
Responsive to pitch, pitch-bend, velocity, breath control/expression, as well as 4 other controller inputs (with MIDI learn)
External MIDI CC control for the matrix and the entire patch (via NRPN)
World-class microtonal support: up to 8 custom tunings, 50 onboard presets, onboard editor, MTS import/export
Built-in arpeggiator: 15 patterns, internal/external MIDI clock sync, custom triggers
Support for up to 3-note paraphony when building a patch
External audio processors
Automatic random patch generation (optional)
Free software editor/librarian (Mac/PC)
225 x 120 x 70 mm (8.9 x 4.7 x 2.8") and 900 gr (2 lbs)
Included: Anyma Phi, 5V PSU and USB cable
Designed and made in France

Notes: The best of both worlds, combining analogue drum circuits with samples and Korg's Multi Engine. Versatile step sequencing, built-in effects and seamless connectivity.

Supplier's Notes:
The introduction of Drumlogue marks a paradigm shift for drum machines. It combines the rich and raw power of analogue, the flexibility and convenience of digital, and the deep customisation of a unique SDK. A heavy-duty dynamic sequencer, powerful effects, and intuitive controls make Drumlogue a must-have in any setup.

The power of analogue

Drumlogue features completely new analogue circuitry from legendary Korg engineer: Junichi Ikeuchi (ARP 2600 M, MS-20 Mini, ARP Odyssey). The depth and richness of its sound is on a whole new level. New analogue circuits for bass drum, snare drum, low tom and high tom provide a solid foundation, and elevate tracks with harmonic richness and a thick low end.

The versaility of digital

Drumlogue has 7 digital parts: 6 sample-based and 1 Multi Engine based. The sample-based parts can play a wide selection of pre-loaded PCM samples alongside imported user samples. These can be easily loaded into Drumlogue by connecting to a computer via USB and simply dragging and dropping into its main memory.

Endless creative potential

The wildly popular Multi Engine from Minilogue XD is made even more powerful: in addition to Variable Phase Modulation (VPM) and Noise generator engines, the Multi Engine in Drumlogue features a new user slot able to play fully-fledged synth voices - providing vast sonic possibilities never before heard on a drum machine.

Custom Synths

Synth voices in Drumlogue are so much more than static waveforms. Custom synths can be built to not only generate sound, but can also draw on built-in filters, LFOs, MIDI controlled polyphony

Exclusive "Nano" plugin

Korg has collaborated with popular plugin developer "Sinevibes" to create a brand new synth plugin for Drumlogue: Nano. This exclusive plugin explores the power behind the newly expanded Multi Engine and gives an incredible first taste of the platform.

"Nano" is a full-fledged virtual analogue synth with a broad array of features and customisable parameters. The synth engine has dual oscillators with optional ring modulation, a 4-pole state-variable filter with soft clipping distortion, built-in EG and built-in multi-waveform LFO.

Sequencing powerhouse

At the heart of Drumlogue is a flexible, easy-to-use, and extremely powerful 64-step sequencer. This makes it easy to create complex patterns and polyrhythms that elevates the music creation process. Innovative features are available including per-step probability, per-step alternate trigger patterns, per-step micro offsets, per-track groove patterns and much more. With the clear OLED display, it's also easy to follow and edit your sequences visually.

Chain mode makes creating long and interesting patterns simple. In loop mode you can switch between several variations to play sequences in new and interesting ways. The Motion and Accent recording functions are fast and intuitive, and if you want to try new things on your track, the randomisation function is there to help you.

Effects and customisation

Drumlogue has high-quality effects across three categories that can be used simultaneously: delay, reverb and master effects. The send amounts for delay and reverb effects are set independently, with multiple return points also available. Master effects add that final polish to the sound and can be bypassed on a per-part basis, meaning it's possible to send the effect to specific audio parts. A sidechain bus is also available to the master effects section.

Drumlogue has an audio input, so you can process other instruments through Drumlogue's effect chain, making it an ideal companion for your studio setup.

Connectivity

With a wide range of I/O, Drumlogue can be integrated seamlessly with your rig. A USB-A port supports connectivity with USB MIDI class-compliant devices, meaning volumes can be controlled with the faders on a nanoKONTROL 2, or sounds triggered by the pads on a nanoPAD 2.
It almost goes without saying that Drumlogue easily syncs with other gear via the MIDI in/out, sync in/out, or via USB MIDI.

Four individual outputs are available, in addition to headphone and main L/R. Any part can be assigned to any output, allowing for expanded routing versatility with external processing and multi-track integration.

Ease of use

Drumlogue is incredibly easy to use - having been designed with simplicity and accessibility in mind. The most important parameters for the main drum parts have dedicated knobs on the front panel for on-the-fly adjustments, as well as dedicated volume pots for each part to speed up the mixing process.

A wide and clear OLED screen coupled with a simple UI and 4 dedicated encoder knobs makes the navigation process fast and smooth.

Design

Unlike other drum machines, Drumlogue's main panel is slanted. This offers superior ergonomics and visibility, while a brushed aluminium body and wooden side panels add to the premium look and feel.

Specifications

Polyphony: 11 voices (*)
(*) User synths may be played polyphonically via MIDI, the actual voice count will depend on the synth's implementation

Sound Engine
Analogue:4
PCM / User samples: 6
Multi-engine(NOISE, VPM, User Synthesizer): 1

Number of Programs (including rhythm patterns): 128 (64 preset programs by factory default)
Effects: Reverb, delay, master

Inputs / Outputs
Headphones
OUTPUT, (L/Mono, R/Audio, Out 1-4)
Sync In/Out
Audio In, MIDI In/Out
USB A (To Device) (Only for MIDI controllers)
USB B (To Host)

Power supply: AC adapter (DC9V)
Dimensions (W × D × H): 317 × 189 × 73 mm/12.48" × 7.44" × 2.87"
Weight: 1.4 kg/3.09 lbs.
Included items: AC adapter, Precautions, Quick Start Guide

Notes: The Haible VC Resonator is an evolution of Jurgen Haible's Resonator which was inspired by the Polymoog Resonator. As Jurgen stated: The Polymoog, an early polyphonic synthesizer, featured a 3-band "Resonator" section that allows Formant-Filtering in addition to its dynamic Filters. Such a Resonator is a very useful feature for analogue synthesizers. Each of the three (now overlapping) filter bands has a control for frequency, signal gain, and emphasis (resonance). The VC Resonator now not only adds VC control for each band, but also extends the ranges whithin which each frequency band can be set - adjacent bands can now overlap or even cross over, for instance the LOW and MED bands can now be set (or moved!) so that the LOW center frequency is higher than the MED frequency.

Jurgen's original Resonator (like the Polymoog) had a switch to select one of 3 basic modes, i.e. only one mode could be used at a time. The Haible VC Resonator now provids the same 3 modes as separate outputs so they can be used simultanously, e.g. for further processing like crossfading.

Some details of the Haible VC Resonator:

Evolution of Jurgen Haible's design
Added Voltage Control for Filter bands
Extended range of each band (overlapping)
Three separate outputs
Burr-Brown op-amps and high-end VCAs
Eurorack (3U) format, 18 hp
Skiff-friendly: < 30mm deep
Power: appr. 60mA @ +12V and 60mA @ -12V

Notes: The definitive MIDI controller keyboard, KeyLab MkII is a luxurious, expressive tool for your studio or live rig. Unsurpassed connectivity, effortless integration, customizable interface, and inspiring included software; there simply is no other MIDI controller quite like KeyLab MkII.

KeyLab MkII is an expressive, versatile, and superbly powerful next-generation USB MIDI controller keyboard. It features dynamic performance and studio controls, including a high quality 49-note keyboard with aftertouch, 16 RGB backlit pads, 9 faders, 9 rotary knobs, and dedicated DAW and transport controls. Its huge connectivity also includes CV/Gate outputs, so you can take command of outboard synth and Eurorack modules with ease. Factor in the amazing included software, and you've just found your ideal creative companion for the studio and stage.

Another level in terms of quality and luxury, KeyLab MkII is a treat for the fingertips and gives unprecedented levels of control over your music and software.

Both 49-key and 61-key versions of KeyLab MkII feature Arturia's Pro-Feel action, the same lusciously playable keybed as the MatrixBrute and MiniBrute 2. Sensitive enough to accurately capture the subtleties and nuances of delicate playing, while still being robust enough to feel the energy of high-impact playing.

Every version of KeyLab MkII also offers 16 RGB-backlit, multi-function performance pads which can be used in a huge variety of ways, whatever suits your performance style or studio needs best. Trigger custom chords, activate samples, quickly switch user maps, KeyLab MkII puts the "control" firmly back into "controller".

A gateway to software, KeyLab MkII features 9 rotary encoders, 9 faders, and a selection of fully assignable buttons to give you unfettered access to your virtual instruments, effects, and recording environment. Send and receive CV/gate data to bridge the gap between modular and MIDI, with a fully customizable setup.

To allow for maximum expression, and to put that unmistakable "human touch" into your music, KeyLab MkII features multiple expression pedal inputs, that can be assigned to whatever parameters you desire in your DAW or virtual instruments, and sports robust, luxurious machined metal pitch and mod wheels. Truly a live-performers dream!

Amazingly versatile, hugely expressive, and geared up to enhance your creativity and workflow wherever your music takes you.

Included is an impressive software bundle: Arturia's complete Piano V virtual piano instrument, Analog Lab 3, and Ableton Live Lite.

Notes: The Allen & Heath ZED-14 is a fantastic entry-level mixer for small bands, solo performers or AV applications. Its comprehensive feature set, compact size and fine lines combine to make it one of the best small mixers around. Provided with 6 mic or line inputs, 4 stereo inputs with EQ, there are an incredible 157 controls on the front panel of the ZED-14.

This is a mixer for anyone, from entry-level to professionals, who appreciates fantastic sound, rugged build quality and imaginative feature sets. It'll be equally happy running your gig on stage, recording live or mixing down in your studio at home.

USB AUDIO FLEXIBILITY
Getting audio to and from a computer easily is now a common requirement for live sound and music production. The way this has been implemented on ZED is super-flexible and super-easy! No longer do you need to fiddle around the back of your PC to get to the soundcard inputs, only to find that the levels are all wrong and noisy. Just plug in a USB lead to your ZED, select the USB routing on the mixer and the device on your computer and that's it! CD quality audio to and from your PC or Mac. Switches and connection through jack socket terminals provide different send/return configurations:-

SEND OPTIONS
1) Main Mix Left + Right (Post-fade)
2) Main Mix Left + Right (Pre-Fade)
3) Auxes 1-2
4) Auxes 3-4

RETURN OPTIONS
1) To Stereo 3 channel

ZED-10 features a responsive 3-band, swept mid frequency EQ design which utilises MusiQ- with optimised slope (or Q factor) for equalising individual instruments.

Based on the proven pre-amps from the hugely successful PA series, ZED-14 has DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage. When amplifying the signal from the XLR input, the gain range is huge - 69dB of range to be exact - and is very evenly distributed around the gain control, meaning better control of signal level. Most of the gain comes from the first stage, so unwanted noise is kept to a minimum. Line level signals are simply plugged into the second stage of the pre-amp by using the line input jack socket, which has the great advantage of less noise when using the line input and also matching to a higher input impedance.

Notes: Compact take on the Bitbox sampler, also offered as the larger Mk2 version. Touchscreen-based design allowing up to eight stereo samples, recording directly or loaded from SD card.

Supplier notes:
Bitbox micro provides Eurorack sampling for smaller racks and smaller budgets. In only 18 HP of rack space you can get a touch screen based sampler with support for 8 stereo sample pads. Now you can record samples directly into the module or load them from the microSD card. Trigger your samples via CV or MIDI, then apply effects and mix the outputs. Save your configurations to multiple presets for later reuse.

Sample Playback

Play up to 24 stereo polyphonic notes when your samples fit in the 64 MB of internal memory or up to 8 larger stereo samples streaming directly from the microSD card
Configure 8 stereo sample pads per preset as single or multi-samples, clips, slicers, granular or new recordings
Stream long samples from the microSD card with a max sample size of 4 GB, which can be many hours of audio
Trigger samples with the touch screen, CV gate inputs, or MIDI input
Control how samples start and stop by choosing from one-shot, toggle, and gate launch modes
Tweak playback through a variety of sample parameters, including start position, length, pitch, gain, filter, loop mode, launch quantization, ADSR, Exclusive Grouping, clip synchronization, slice placement and sequencing, grain size, grain spread, grain count, and MIDI note and channel mapping

Sample Recording

Record Eurorack level audio straight into the module:

Record samples from a stereo audio input pair
Configure each pad for stereo or mono recording with the option to synchronize the start and stop times to clock inputs
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Resample the master output without patching
Automate recording of a multi-sample bank via MIDI and CV
Store recorded samples as WAV files on the micro SD card then remove the card to transfer them to your computer

Sample Modes
Find creative ways of using your samples with our 5 sample playback modes:

Trigger one shots or launch loops using sample mode
Load a folder of samples into a sample mode pad to improve the quality of the pitch shifting when playing a sample chromatically or to trigger different samples with each note
Play time-synchronized loops with constant pitch time shifting in clip mode
Skip between slices of a WAV using slicer mode
Create rich textures and other worldly sounds with granular mode

Inputs and Outputs
Use the 8 inputs the way you want: assignments include a stereo audio input, up to 8 gate inputs, up to 8 CV inputs and 1 clock input.
Route the audio from each pad out to one of 3 stereo audio outputs or one of 6 mono audio outputs
Listen to all of the pad outputs combined on the master stereo output

External Control and Synchronization
Playback can be immediate or synchronized to internal clock, TRS clock in, or MIDI clock in and out
Confidently connect with both TRS MIDI Type A and Type B, no adapter needed
Play a single or multi-sample pad pitch shifted using MIDI notes or CV
Trigger different sample slices using MIDI notes or CV
Modulate a wide variety of sample parameters through the MIDI input and up to 8 CV signals
Quickly set up MIDI modulation using Learn mode - no need to look up CC numbers
Module Features
Use the 2? diagonal touch screen to intuitively explore the features of the module
Get more creative with double the processing power of the original bitbox
Refine your sound with reverb and delay
Import or export WAV files with your Mac or PC using a microSD card
Save and recall multiple presets
Increase your capacity with larger microSD cards
Inputs and outputs are DC coupled so you can record and play out CV signals

Notes: This module provides you with four motorised faders (aka flying faders) to be attached to your DROID master. You can attach up to 16 of these units (or any other DROID controllers) to one master, so the maximum number of faders on a DROID is 64. Below each fader is a touch button and an LED.

You can use the faders, the buttons and the LEDs in very flexible ways to control all parameters in your DROID patches, like steps of a sequence, volumes of channels of a digital mixer (controlled via MIDI with the X7), parameters of a large bank of envelopes, CV values that are organized in presets and much more.

The special thing about the motorized faders is that each fader can be assigned several functions or presets. When you switch the function, the fader moves to the exact position that corresponds to the current value. The usual Eurorack "picking up" of potentiometers or faders, where you never know exactly which value is currently set, is now a thing of the past.

Another unique feature is the "haptic feedback". If a fader is used, for example, in a sequencer to select a note from a scale, you can feel each individual note like an artificial notch. The fader intelligently creates these virtual grooves with its motor. This is very useful and very intuitive whenever you use the fader to select one out of several discrete values. Other examples are clock divider settings, the number of a preset, a waveform, a clock offset and much more. Due to the haptic feedback you don't need any display for seeing what you are doing. You can concentrate on making music and play very intuitively.

Another kind of haptic feedback is a kind of "pitch bend wheel", where the fader always pushes back to the center position by itself. Here the motor creates an artifcial spring. When setting analog values such as a volume or a filter cutoff, the fader then runs freely, of course.

Applications

The DROID plus the faders can be used for various applications - and due to the possibility of switching even at the same time! Here are some example:

A multi track performance sequencer
Use a MIDI controllable digital audio interface as mixer
Control a bank of four envelopes with A, D, S, R each with just four faders
Use the faders for CV presets
Use the faders and their haptic feedback for live performing with pitch bends, ratcheting and all other crazy stuff
Power
Motor faders need much energy. Theoretically one single fader can draw up to 800 mA when at full power. That seems to be the main reason why nobody dared in bringing motorised faders into Eurorack so far.

Der Mann Mit Der Maschine have solved that challenge by making use of the fact that the fader need their power always just for a very short time. The M4 unit comes with four big power tanks (called super caps) that are loaded with a low current but provide the full power when the faders need them. That way the maximum current of one M4 unit is limited. With jumpers on the back you can choose between a peak current of 350, 450, 500 or 600 mA.

Dimensions
14 HP
42 mm deep

Current Draw
350 mA +12V

Notes: Part of the analogue MG-X series, the MG16X CV features 16 channels with D-PRE class A preamps, three-band semi-parametric EQ and high-quality SPX digital effects. Solid value.

Supplier's Notes:
MG-X are an addition to the MG Mixer line up. Available in 10, 12 and 16 channel versions, this variant of MG Mixer features our acclaimed SPX effects, without the USB option featured on the XU model - perfect for all scenarios where USB streaming is not needed. The quality and features of the MG mixers series is of course retained, whilst the new models are presented in a fresh black/grey finish.

Road Tough. Studio Ready.

For more than a century, Yamaha has been building a legacy of superior craftsmanship and innovation exemplified in all of their products, from an unrivalled catalog of world-class musical instruments to touring-grade professional audio. Now in its third incarnation, the MG Series embodies this pursuit of design excellence, and incorporates some of the same technologies developed for use in high-end professional consoles, including studio-quality preamps, powerful digital processing, and a rugged, reliable construction.

With an intuitive, easy-to-use interface, the MG Series boasts an extensive lineup of compact mixing consoles with models ranging from six to twenty channels, suitable for a diverse range of users and applications. For installed, recording, or live music settings, the solid construction and flexible design of these consoles lets you shape your sound with confidence, continually delivering peak performance and a level of sound quality and reliability unrivalled in its class.

As same as XU models, X models have SPX effects. Not to mention live session, but also installation cases like conference rooms, banquet halls and weddings, users can have wide range of use. Stylish grey colour models enhance your performance.

Specifications

Mixing capability

On-board processors - SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)
I/O
Phantom power: +48 V
Digital I/O: N/A

Input Channels

Mono[MIC/LINE]: 8
Mono/Stereo[MIC/LINE]: 2
Stereo[LINE]: 2
Output Channels
STEREO OUT: 2
MONITOR OUT: 1
PHONES: 1
AUX SEND: 4
GROUP OUT: 4
Bus - Stereo: 1, GROUP: 4, AUX: 4 (incl. FX)

Input Channel Function

PAD: 26 dB (Mono)
HPF: 80 Hz, 12 dB/oct (Mono/Stereo: MIC only)
COMP: 1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec
EQ HIGH: Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
EQ MID: Gain: Gain: +15 dB/-15 dB, Frequency: Mono 250 Hz - 5 kHz peaking, Stereo 2.5 kHz peaking
EQ LOW: Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
PEAK LED: LED turns on when post EQ signal reaches 3 dB below clipping
Level Meter: 2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]

General

Total harmonic distortion: 03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min
Frequency response: +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min
Hum & noise level
Equivalent input noise: -128 dBu (Mono Input Channel, Rs: 150?, GAIN knob: Max)
Residual output noise: -102 dBu (STEREO OUT, STEREO master fader: Min)
Crosstalk: -78 dB
Power requirements: AC 100 - 240 V, 50 / 60 Hz
Power consumption: 22 W

Dimensions

W: 308 mm (12.1"), H: 118 mm (4.6"), D: 422 mm (16.6")
Net weight: 2 kg (9.3 lbs.)
Accessories: Included Accessory: Owner's Manual, Technical Specifications, AC power cord, Cubase AI Download Information, Optional Accessory: Rack-mount kit RK-MG12, Foot Switch FC5
Others: Operating Temperature: 0 to +40C

Notes: Black version of Bitbox's excellent sampling module. Touchscreen-based design allowing up to eight stereo samples, recording directly or loaded from SD card.

Supplier's Notes:
Bitbox micro provides Eurorack sampling for smaller racks and smaller budgets. In only 18 HP of rack space you can get a touch screen based sampler with support for 8 stereo sample pads. Now you can record samples directly into the module or load them from the microSD card. Trigger your samples via CV or MIDI, then apply effects and mix the outputs. Save your configurations to multiple presets for later reuse.

Powerful Sampling Capabilities in a Smaller Form Factor

With the sampling features of Bitbox micro you can add interesting new ways of generating sound and music to your Eurorack. Trigger one shots, play time synched loops or record live looping. Bitbox micro is equally at home in your studio or as a component of your live performance.

Features

Sample Playback
Play up to 24 stereo polyphonic notes when your samples fit in the 64 MB of internal memory or up to 8 larger stereo samples streaming directly from the microSD card
Configure 8 stereo sample pads per preset as single or multi-samples, clips, slicers, granular or new recordings
Stream long samples from the microSD card with a max sample size of 4 GB, which can be many hours of audio
Trigger samples with the touch screen, CV gate inputs, or MIDI input
Control how samples start and stop by choosing from one-shot, toggle, and gate launch modes
Tweak playback through a variety of sample parameters, including start position, length, pitch, gain, filter, loop mode, launch quantization, ADSR, Exclusive Grouping, clip synchronization, slice placement and sequencing, grain size, grain spread, grain count, and MIDI note and channel mapping

Sample Recording

Record Eurorack level audio straight into the module:
Record samples from a stereo audio input pair
Configure each pad for stereo or mono recording with the option to synchronize the start and stop times to clock inputs
Trigger recording via audio level threshold
Create perfectly sized loops by setting the recording length
Enable immediate playback after recording for live looping capabilities
Make recordings up to 4 hours in length
Resample the master output without patching
Automate recording of a multi-sample bank via MIDI and CV
Store recorded samples as WAV files on the micro SD card then remove the card to transfer them to your computer

Sample Modes

Find creative ways of using your samples with our 5 sample playback modes:
Trigger one shots or launch loops using sample mode
Load a folder of samples into a sample mode pad to improve the quality of the pitch shifting when playing a sample chromatically or to trigger different samples with each note
Play time-synchronized loops with constant pitch time shifting in clip mode
Skip between slices of a WAV using slicer mode
Create rich textures and other worldly sounds with granular mode

Inputs and Outputs

Use the 8 inputs the way you want: assignments include a stereo audio input, up to 8 gate inputs, up to 8 CV inputs and 1 clock input.
Route the audio from each pad out to one of 3 stereo audio outputs or one of 6 mono audio outputs
Listen to all of the pad outputs combined on the master stereo output
Inputs and outputs are DC coupled so you can record and play out CV signals
External Control and Synchronization
Playback can be immediate or synchronized to internal clock, TRS clock in, or MIDI clock in and out
Confidently connect with both TRS MIDI Type A and Type B, no adapter needed
Play a single or multi-sample pad pitch shifted using MIDI notes or CV
Trigger different sample slices using MIDI notes or CV
Modulate a wide variety of sample parameters through the MIDI input and up to 8 CV signals
Quickly set up MIDI modulation using Learn mode i no need to look up CC numbers

Module Features

Use the 2" diagonal touch screen to intuitively explore the features of the module
Get more creative with double the processing power of the original bitbox
Refine your sound with reverb and delay
Import or export WAV files with your Mac or PC using a microSD card
Save and recall multiple presets
Increase your capacity with larger microSD cards
Compare to Our Other Samplers
Our Sampler Selection Guide shows you how bitbox micro compares to our other samplers.

What Is Included

When you purchase bitbox micro, you will receive:

a bitbox micro Eurorack module
a microSD card with a bank of demo presets and samples loaded on it
a Eurorack power cable
a bitbox micro Quick Start guide
a MIDI Adapter
Firmware Updates
Get new features by downloading firmware updates from forum.1010music.com.

Documentation and Video Tutorials

The Bitbox Micro Support page has links to videos, the quick start guide and the full user manual to get you up and running quickly and answer your detailed questions. If you can't find answers there, reach out to the community with questions on the 1010 Music forum.

Notes: For decades now, professional users all around the world have placed their trust in Beyerdynamic studio headphones. They remain the number one choice for music producers, sound technicians and broadcast users and are a firmly established piece of equipment in studios worldwide.

The DT 1990 PRO reference headphones combine these decades of expertise in headphone technology with the latest Tesla driver technology in an open-back design.

Thanks to its high-resolution and well-balanced sound the DT 1990 PRO sets new standards, not least in terms of design and workmanship.

Made in Germany:

As with all Beyerdynamic professional studio headphones, the DT 1990 PRO is also handcrafted in Germany. Backed by high-quality materials and meticulous workmanship, this high-end product is a long-term investment.

High-resolution sound:
Power and precision are critical requirements when it comes to sound reproduction. The efficiency of our latest Tesla driver technology is characterised by accurate resolution and high output power. Brilliant highs, a richly detailed midrange and precise bass combine to ensure sublime sound quality that is second to none.
Together with an ingenious open-back design, the high-resolution Tesla drivers ensure a wide, dynamic and extremely natural stereo image. Titanium-coated acoustic fabric and carefully selected precision-woven textiles round off the balanced sound quality.

Maximum wearing comfort:
The perfected design of the DT 1990 PRO combines innovation with decades of expertise in headphone technology. High-tech textiles and memory foam filled ear pads ensure exceptional wearing comfort. Headphones so comfortable you almost forget you are wearing them.

Open back design:
Natural and exceptionally spatial sound is achieved thanks to the open-back circumaural design. The optimised spatial sound reproduction makes the DT 1990 PRO headphones a reliable reference for mixing and mastering applications as well as for critical listening.

Two sound settings:
Choose between a well-balanced sound or analytical sound thanks to replaceable velour ear pads. Both ear pad variants are included to finish off this impeccable studio headphone package.

Durable construction:
The DT 1990 PRO is handcrafted in Germany. From a classy headband through to anodised aluminium yokes, these new studio headphones will impress with their exceptional craftsmanship and careful attention to quality and durability.

Technical data:
Transmission type: Wired
Nominal impedance headphones: 250 ohms
Weightheadphones without cable: 388 g
Headphone frequency response: 5-40,000Hz
Nominal sound pressure level: 102 dBSPL (1mW/500Hz)
Sound coupling to the ear: Circumaural (around the ear)
Cable & plug: 3-pin XLR plug, 6.35 mm (1/4") stereo jack plug, 3 m straight cable & 5 m coiled cable

Notes: Stylish and compact speakers with powerful 200-watt amplifier built in. Impressive 50 Hz - 20 kHz frequency response courtesy of 5.25-inch kevlar woofer and 1-inch silk dome tweeter.

Supplier's Notes:
Satisfy your craving for powerful, full-impact sound with YU6. Armed with a formidable Class D amplifier pumping out 200-Watt peak power, YU6 will have you questioning what it really means to be loud. Its 5.25-inch Kevlarr drivers and 1-inch silk dome tweeters inject detailed sound into every square inch of living space, evoking emotions that can only be expressed with an ear-to-ear grin.

High-performance materials. Exceptional sound.
YU6's 1-inch tweeters are made from silk to deliver a high-frequency range that is bright and refined. Their dome shape improves sound dispersion to ensure your ears capture every sound, regardless of where you are in the room.

Unmatched connectivity.
Inspired by an equal appreciation for digital and analog, YU6 gives you the freedom to enjoy all your devices. Connect a turntable via a built-in phono preamp, transmit high fidelity audio from your computer or TV with Optical TOSLINK, or sit back and enjoy your newly curated playlist with Bluetooth 4.0. With five inputs and a subwoofer output, YU6 brings all your sound to life.

Throw on your favorite record.
YU6 comes equipped with a built-in phono preamp, allowing you to easily connect any vintage or modern-day turntable. Toggle between line-level and phono with a simple flip of a switch, and reduce noise using the provided ground terminal.

Play tunes from the palm of your hand.
Featuring integrated Bluetooth 4.0 with Qualcommr aptX technology, YU6 lets you stream high-quality audio directly from any Bluetooth-enabled device. Sit back and enjoy your carefully curated playlist from anywhere in the room.

Upgrade your desktop setup.
Take your desktop setup to the next level by connecting YU6 to your computer via the RCA, AUX or Optical TOSLINK inputs.

To reduce vibration and improve soundstaging, use YU6 with SP6HD desktop speaker stands.

Bring your movies to life.
Enhance any cinematic experience with high-fidelity sound by connecting YU6 to your TV via one of two optical TOSLINK inputs.

To ensure your speakers remain stable and properly positioned, place them on SP floor stands.

Take control of your sound.
Packed with functionality, the YU series remote makes listening to audio more convenient. Quickly switch between sources, tune your sound to fit your space, and control playback while streaming via Bluetooth.

Never miss a beat.
Automatic standby and power-up mode conserves power when you're away and continues playback when your music starts playing.

Use the provided USB charging port to conveniently power your phone, smart home or casting device directly through your speakers.

DRIVERS
1" Silk Dome Tweeters
5.25" Kevlarr Drivers

AUDIO
Class D Amplifier
200W Peak Power (100 Watts Total RMS)
Frequency Response: 50 Hz - 20 kHz

INPUTS
3.5mm mini-jack AUX
RCA with Phono Switch
2 x Optical (TOSLINK)
Bluetooth 4.0 with Qualcommr aptX

OUTPUTS
Subwoofer
USB Charge 5V 1A

WHAT'S IN THE BOX
Remote with Batteries
Power Cord
Speaker Wire (16")
3.5mm Auxiliary Cable (6.5")
8 x Rubber Feet
Manual

WEIGHTS & MEASUREMENTS
Dimensions (each speaker):
6.9" W x 8.1" D x 10.7" H (17.5 x 20.5 x 27.2 cm)
Net Weight (active): 11.4 lb (5.2 kg)
Net Weight (passive): 8.7 lb (4.0 kg)
1/4"-20 Threaded Mounting Hole

Notes: Chroma version of Arturia's flagship KeyStep Pro, a brilliantly versatile sequencer and controller keyboard capable of controlling MIDI synths, drum machines and analogue gear via CV.

Supplier's Notes:
KeyStep Pro Chroma

Sequencing mastermind recoloured

KeyStep Pro Chroma is a special-edition version of the unparalleled 4-track sequencer & keyboard, embellished with a sleek dark grey finish, great-feeling knob caps and customizable track colours. The same all-in-one power, with more edge.

The future is sequenced

Rediscover the controller keyboard that changed the sequencing game, upgraded with a futuristic exterior and supercharged with unique creative functionality.

Chroma aesthetic

Retrofit your musical setup with sleek cyberpunk attitude. KeyStep Pro Chroma features a dark grey casing, vivid blue LEDs, and striking knob caps.

Customize your flow

Exclusive to KeyStep Pro Chroma, you can customize the LED colours for each of your tracks - so every project and composition looks as unique as it sounds.

The must-have sequencer

KeyStep Pro remains the benchmark for hardware & software sequencing and creative performance alike. Chroma is no exception: your sequencing mastermind

Abundant connectivity

From Eurorack modules, to analogue synths and VST's, synchronize all your gear and unleash your creativity in style.

Enterdark mode

Fusing utility with aesthetics, creativity with beauty, and sleek design with vivid colour, KeyStep Pro Chroma delivers next-level performance with pure style.

Exterior

A dark grey shell simultaneously gives this controller space station futurism and classic car attitude.

Lights

Icy blue LEDs illuminate Chroma's metal exterior, while customizable track colours inject perfectly-contrasting vibrancy.

Controls

Complementing the cool grey shell and vivid LEDs, Chroma's controls feature premium, great-feeling stylish caps.

Control hardware, software & DAW at the same time

Looking for the best modular sequencer?

How about a MIDI controller for Ableton? Or a live performance keyboard that can sync all of your favourite synths to a DAW click track? KeyStep Pro's extensive list of controls, connections, and creative functions are designed to tick every box - let's take a closer look:

The ultimate multi-function controller

Command complex hardware setups, entire DAW setlists, modular racks, and more - all with a user-friendly workflow that prioritizes creativity.

KeyStep Pro remains unique and unmatched in its balance of performance-oriented playability, massive connectivity, and creative depth.

Main Features

Unique dark grey design with blue LEDs and stylish knob caps

Customizable track colours

37 note slim keys, velocity and aftertouch sensitive
LED above each key for efficient visual feedback

Four track step sequencer
16 step buttons, up to 64 steps per sequence
Up to 16 notes of polyphony per step

Melodic sequencer
Real-Time recording, step recording, step editing
Pitch, velocity, gate length, time shift and probability for each note
Scale quantization with user scales
Polyphonic CV outputs

Drum sequencer

24 part drum sequencer
Polyrhythm

Performance-oriented sequencer
Forward and two random playing modes
Pattern randomization
Quantized or unquantized recording
Looper

Arpeggiator

7 arpeggiator modes, 5 octave range

What's in the box

Box content

KeyStep Pro unit
Registration card
Quick Start
USB cable
Power supply

Dimensions
Size : 23.2 x 8.2 x 1.5 inches (589 x 208 x 38mm)
Weight : 5.9 lbs. (2.7 Kg)

Notes: The Spectral Multiband Resonator from 4ms Company is an innovative resonant filter which can process audio like a classic filter bank, ring like a marimba when plucked/struck, vocode, re-mix tracks, harmonize, output spectral data, quantize audio to scales, and much more...
A gorgeous ring of colored lights displays the frequency of each filter, as well as the levels and current scale selection(s).

At a glance, the SMR works like a normal six-band graphic EQ: six frequency band-pass filters are mixed together using sliders. Resonance/Q is variable, which changes the "ringy-ness" or width of the bands.

But here's where comparison stops. The frequency of each channel is treated like a note in a scale, and the six bands form a chord. Spin the Rotate knob and the "notes" circle around the scale, rotating back to the bottom once they've reached the top. Adjust Spread and the distance (interval) between each note changes. Triggers for up/down motion, CV inputs for sequencing and scale selection allow for flexible control with external modules. Morph, which automatically cross-fades between frequencies, together with variable Slew allows rhythmic clocks drive the SMR as a variable-speed evolving resonant filter.

At maximum Resonance/Q, the SMR can be struck like a gong or marimba by inputting clocks or triggers. The frequency of each channel is quantized to a scale: beautiful chords, ethereal tones and eerie ambiance flows easily. With lower resonance, the SMR can pull out particular frequency bands, and sweep these across the spectrum.

Two 1V/octave Frequency jacks allow for tracking even and/or odd bands and creating floating melodies over evolving chord bases, or complex percussive membrane sounds.

Save your settings into one of six storage banks, and recall on the fly. On startup, the SMR instantly jumps to the last saved settings. The color scheme of the lights can be adjusted, so if you prefer all white lights on your modular, you can have that (or all red, or rainbows, pastels, etc..)!

Advanced features:
- Program your own scale. The frequency of each of the 20 notes can be assigned by setting the octave, the semi-tone, and coarse and fine micro-tone. Up to 11 scales can be saved permanently in the user bank
- Adjust color scheme of the LEDs. Pick a pre-programmed color scheme or create your own using the sliders to set Red/Green/Blue values. Custom color schemes can be saved permanently
- Save your settings in one of six parameter banks. Note position, scale and bank selection, Q value, Lock settings and color scheme can be saved and recalled on the fly. On startup, the SMR loads settings from the last saved bank.
- Optional alternative filter type for a more exponential decay when plucked and different timbral qualities. Freq jacks no longer track 1V/oct in this mode.
- Slider LEDs can be assigned to display level for each channel (combination of slider position and CV on the jack), or clipping for each channel.

Notes: Reissued version of one of Dreadbox's back catalogue synths, the Erebus is a paraphonic design with two VCOs, a characterful low-pass filter, built-in delay and updated snappy envelopes.

Supplier's Notes:
Dreadbox's most unique sounding analogue synthesizer is finally back, warmer and snappier than ever!

All you synth lovers, the time has come to dive into the Erebus...

All Analogue Paraphonic Synthesizer
Faithful Reproduction of the Erebus V1
2 Oscillators with 2 Waveforms each
Separate Glide controls and Hard Sync function
2-pole Low Pass pre-fed Filter
1 ADSR envelope and a AR Amp Envelope
Snappier than the V1

OTA VCA
Lo-Fi Delay effect
Wide Range LFO
15 patch points for an astonishing and spectacular modular experience
Compact, USB powered, Eurorack Format (42HP)

Ethereal & Dreamy

Warm sounding Oscillators
Classic Dreadbox Filter
Snappy Envelope Generators
Lo-Fi Delay effect to expand your sound
CV outputs: Envelope, LFO, Mod Wheel, Gate, CV1, CV2
CV inputs: Osc1, Osc2, Echo, Cutoff, CV, Gate, LFO Rate, PW, VCA

Specifications & Connections

USB powered (1.5 Watts)
50 Playing hours with 20,000mA portable power bank
MIDI IN via DIN5
14 MONO TS Jack Out

Dimensions: 21.5 x 13 x 6.5 cm
Weight: 1 kg

Requirements:

USB-A Adapter (5v) with 1000mA or more
MIDI device or keyboard that is equipped with DIN5 midi output
Monitor, Amp or Headphones

Included in the box:

Erebus Eurorack module
42 HP case
1x DIN5 to 3.5mm adapter
1x Ribbon cable

Notes: Proper futuristic amp modelling and effects courtesy of Mooer's next-level GE1000, featuring AI-driven auto-EQ and a five-inch touchscreen. Hook up to the GE Cloud app to edit and share sounds.

Supplier's Notes:
MOOER has consistently pleased the guitar pedal market with its GE multi-effect range, and its latest addition, the GE1000, is set to be no exception. The GE1000, built with a futuristic and sleek "Walking Star" design, builds upon past GE products, offering an even larger range of guitar processing effects, preamps, amp simulators, and features than previous entries.

The GE1000 comes preloaded with an impressive bank of guitar effects and amp simulations, but this is augmented further through MNRS GE Cloud support. MOOER's MNRS files consist of IR samples from real amplifiers, facilitating authentic feeling tones that can be downloaded, uploaded, and shared via MOOER's 'GE Cloud' app for free. The GE1000 also supports third-party IR files of up to 2048 sample points, enabling further expansion of the pedal's portfolio of amp simulators.

Further adding to the GE1000's impressive amplification and tone features, the GE1000 includes a cutting-edge AI-driven automatic equalizer, a first for MOOER. This automatically adjusts a 5-band EQ based on the user's playing and music style choice, providing further possibilities for creativity whilst still providing the flexibility of a manual-controlled EQ interface.

MOOER hasn't only focused on tone and pitch with the GE1000 exclusively, which is illustrated perfectly by the integrated Groove Station rhythmic toolkit, consisting of a style-specific drum machine and a looper. These features have been designed to work both independently and in tempo synchronization, making them adaptable for all types of jam. The looper even includes automated record and count-in functions, activating the loop recording when an input signal is detected, providing a unique hands-free looping experience.

MOOER has always excelled at providing innovative UI experiences, and the GE1000 is set to continue this trend. The pedal features a 5-inch high-quality coloured touch screen designed for intuitive multi-effect workflows while keeping some fan favourites from previous GE pedals. These include the signature MOOER multi-purpose control dials, buttons, and a quick-access expression pedal.

Additional flexibility can be found within the pedal's cutting-edge control systems, including programmable MIDI ports, bundled preset management software, and compatibility with the MOOER mobile app.

This level of flexibility is matched by the pedal's audio routing solutions, which feature Bluetooth playback, USB audio interfacing, serial and parallel TRS stereo FX LOOP compatibility, and industry-standard input and output ports.

Notes: Hugely powerful multi-engine synth module, offering up to eight voices and eight oscillators, sample playback, custom wavetables and much more. Ultra versatile.

Supplier's Notes:
8 full voice polyphonic, multipart, multi engine synthesizer module with sample playback, sweet reverb and chorus.

Create pads, basslines, riffs and drums. All in one module.

Group voices into parts and assign each voice a different engine or parameter settings to create complex patches.

Features:

Big Sound

Lots of computing power to deliver rich sounding engines, in an 8 voice package.
One voice can have 8 oscillators depending on the engine, which means up to 64 oscillators at the same time!

Polyphonic

Coral features 8 full voices with independent filter, amplifier and modulation envelopes per voice.
Individual FX sends and individual parameter can be set per voice!

Multiengine

Different sound engines can be assigned to each voice from the 10 available.
New engines will be available through firmware updates.

Multipart

The 8 voices can be freely split into different parts. Every single parameter (filter, envelope settings, engine, FX sends, pan, etc.) can be independently set for each part or voice to create complex patches out of the box.

Sample playback

CORAL supports almost any kind of wav file: 16, 24 and 32 bit mono and stereo files, no limit to playback time!
Add overdrive to your samples, sculpt them using the filter and envelopes, pitch them up and down in tune and even modulate the sample file or folder in real time using the CV inputs or CC MIDI commands!

Custom wavetables

You can load any wavetable .wav file to the SD card for the Wavetable engine. The wavetable can be morphed in 3 dimensions. Use our OXI Wave APP to create and edit 3D wavetables.

MIDI Integration

Control any part's parameter via MIDI CC, from FXs sends to sample selection.
Combine it with CV signals for a killer compact combo.

Effects

Space engine to create deep atmospheres and rich ensemble chorus.
Every effect send can be set per voice

Notes: *** Free software update available as a free download, along with updated documentation, at the Mob of Emus product page on the Rossum Electro-Music website***

A lot to unpack here. Six-channel multipurpose oscillator/noise source/modulation generator with quantisation, trigger generators and even more. Seriously powerful all-round digital goodness.

Supplier's Notes:
Mob of Emus is a powerful music and sound design tool that packs an enormous amount of creative power into an amazingly compact 16HP module.

Mob of Emus gives you six channels of oscillators, noise sources, cyclical and 1-shot modulators (including LFOs, envelopes, and various other shapes), sample and hold waveshapes, slow random modulators, triggers, rhythm patterns, and quantization (of both internal and external signals) in pretty much any combination (well, any combination of six channels, anyway).

In addition to being able to independently program the function of each individual channel, Mob of Emus' Hex Mode provides a macro control layer that allows you to control all of its channels simultaneously (while maintaining the relationships of each channel's independent programming).

What's more, Mob of Emus' "harmonic" control structure makes it extremely easy to combine its oscillators into rich additive timbres, to combine its LFOs into stacked harmonic low frequency modulation waves, and to create modulation sources and triggers with intricate polyrhythmic patterns.

With an external trigger input, six CV inputs that can operate in six different control modes, six independent outputs, and an assignable mix output, Mob of Emus can operate as the heart of an almost unlimited variety of patches. And its 8 real-time controls will give you immediate hands-on access to a channel's (or all six channels') key parameters, inviting (and rewarding) exploration and improvisation.

Mob of Emus features include:

Six channels that can function independently or can be further controlled by a Hex Mode macro layer that lets you control all six simultaneously. Channels can be:
Wide-range digital oscillators
Noise sources
Cyclical and 1-shot modulators (including LFOs, envelopes, and various other shapes)
Sample and hold waveshapes
Slow random modulators
Triggers
Rhythm patterns
Quantizers (of both internal and external(!) signals)
Six CV inputs that can function in six different control modes
Eight real-time controls for immediate access to key channel parameters
Six individual channel outputs and an assignable mix output
The ability to store and recall 12 user presets
And much more.

Mob of Emus is 16HP wide and 25mm deep.

Power requirements (max): 130mA +12V, 25mA -12V. Reverse polarity protected.

As of March 2021, there has been a been a small bug fix to the recent software update for Mob of Emus.

The update fixes a bug where holding the Channel Selector Buttons for a short time to select a single channel and deselect any others was not working correctly.

The update fixes a bug where some Hex Mode parameters were not ignored when Hex Mode was set to off.

The update introduces a feature allowing users to double-click and hold the Hex button to reset all Hex Mode parameters and set Hex Mode to on.

Rossum Electro-Music made a change to the behavior of the LEDS when using the utility 'Display Software Revision'

Notes: ***B-STOCK: Box opened, product in perfect working order***


Record. Mangle. Destroy.

Nebulae is a granular sampler and DSP platform. Its phase vocoder audio engine provides elastic audio, which can be time stretched, granularized, and mangled to no end. With independent control over pitch and speed, and granular controls such as overlap, window, and density, finding new sonic territory is only a knob turn away. Nebulae can use live audio input, a recorded buffer, or audio files as the source material for its powerful audio manipulations. The live input buffer can record up to five minutes of stereo audio at 48kHz, 24 bit. In addition, up to 75 MB of stereo audio can be loaded simultaneously through the USB port. No naming convention or special formatting necessary; just plug and play.

Nebulae lives a double life as an open source DSP platform with an extensive library of off the shelf alternate instruments. You can turn the module into a lush reverb, spectral delay, or tape-style looper simply by loading a new file onto the flash drive. Do you want to tweak one aspect of an existing instrument, even the default functionality? No problem. No prior coding knowledge is necessary to tweak and refine existing firmware to your liking or start with one of our templates. Alternate firmware files can be written with Pure Data, Csound, SuperCollider, and even bare-bones C programs.

Notes: Explore unique sonic possibilities with this semi-modular digital synth, combining physical modelling with spectral sound sources, versatile effects and complex modulators.

Supplier's Notes:
An affordable hybrid monophonic synthesizer that allows you to create new sound universes inspired from the real world, where objects collide, vibrate, and resonate.

Anyma Phi blends the classic ingredients of electronic music with physical modelling technology, allowing it to simulate acoustic sound sources, such as strings or reeds, as well as resonating structures, like wood, glass, or metal.

Anyma Phi is compact enough to stand on your keyboard, or anywhere on your desk, and is compatible with any MIDI controller, such as keyboards, sequencers, or even wind controllers, including Aodyo's own Sylphyo.

Whether you play live or record in the studio, design sounds or play presets, Anyma Phi will become an indispensable tool. It can even be used as a stand-alone effects processor, or as part of a guitar effects pedal setup.

The heart of the Anyma Phi is the matrix, which provides a quick and easy way to explore your sounds by following a physical metaphor, with four macros for each of the five stages of sound generation:

With its matrix, Anyma Phi offers a straightforward way to tweak, explore, and create sound universes. It also provides easy ways to make your sound react to your MIDI controllers with mapping shortcuts. But don't be fooled by the simplicity!

If you want to dive deeper, you can take control of the powerful semi-modular synth engine beyond the matrix, with oscillators covering a wide range of synthesis techniques, effects, and modulators.

By connecting those together, you can create any kind of sound, and control it any way you want.

Anyma Phi offers you:
Up to 3 oscillators (sound sources)- physical models, classic spectral, noise souces, external input
Up to 5 effects: resonators, filers - EQ, pitch shifter, ring mod, delay - reverb, chorus - phaser, drive - folder
Up to 8 modulators: envelopes, LFOs, curves, slew limiter, math & logic

This amounts to 69 different module types available, including 30 sources, 22 effects, and 17 modulators.

Technical specifications:
Hybrid monophonic synthesizer
Stereo audio output:
Two 1/4" mono line jack outputs
One 1/4" stereo headphone jack output
1/4" stereo jack audio input (internal piezoelectric mic when external input unplugged)
MIDI inputs and outputs via USB and DIN ports
Powerful digital semi-modular synthesizer engine :
Memory: 200 patches
3 oscillator slot
5 effect slots along 2 serial buses (Main, Aux) + 1 mono reverb
16 modulator slots, including envelope generators, LFO, curves, interpolators, slew limiters, etc.
32 mapping slots (virtual patch cords), each allowing to control any synth parameter (including another mapping) using a modulator or a controller input, with a sidechain input
Responsive to pitch, pitch-bend, velocity, breath control / expression, as well as 4 other controller inputs

Additional features:
Percussive playing surface
Patch librarian / editor
Extended memory

The percussive playing surface will allow you to tap and scratch your sounds directly on the case, making your performance even more expressive and fun! This would be made possible by integrating a piezoelectric contact microphone into the case. The resulting sound would be available to use on the Anyma as an audio input, ready to be fed into resonators and effects!

You can edit patches directly on your Anyma, as well as send and receive patches via MIDI SysEx. But what about something more comfortable and powerful?

This software will allow you to easily manage and share patches, as well as edit them in depth in a streamlined environment on your PC or Mac, by making all the synth components directly visible and showing their interactions.

With more memory, you can have a huge library of sounds at your fingertips, or you can make many variations of your patches without having to worry about space or having the computer editor around to make backups!

Let's free the Anyma Phi from the shackles of the Western 12-tone equal temperament! A440 be gone!

Notes: Part of Mackie's excellent ProFX series, the 12v3+ combines a 12-channel analogue mixer with built-in USB audio interface for quality recordings. Includes GigFX+ digital effects, colour LCD screen and Bluetooth input.

Supplier's Notes:
12-channel professional analogue mixer and USB-C audio interface with powerful enhancements for studio-quality recordings and live streams. Capture your performance with award-winning Onyx preamps, channel EQ and analogue compression. Upgraded GigFX+ effects enhance your sound, plus you can edit and save your presets on the fly via the full-colour display. Switch between recording modes to track dry or include the FX, or use loopback mode to stream video games or perform over backing tracks without feedback. You can even bring in podcast guests over the phone via Bluetooth on a dedicated channel. With easy connectivity, the warmth of analogue and an upgraded FX engine, Mackie ProFX12v3+ is the perfect centrepiece for your studio.

Mackie ProFXv3+ Series is a professional analogue mixer and USB-C audio interface with powerful enhancements for studio-quality recordings and live streams. Capture your performance with Onyx preamps and channel EQ, add computer audio via loopback, bring in calls via Bluetoothr and enhance your sound with upgraded GigFX+ effects on a colour LCD screen.

With up to 60 dB of gain and ultra-low noise, ProFXv3+ series mixers allow you to sound better than ever. Record podcasts, stream gameplay or produce the next hit-all with ultra-clean, transparent audio. Our award-winning Onyx Mic Preamps deliver analogue warmth so you sound great, no matter what you do.

Enhance your sound using high-resolution GigFX+ effects, with 12 presets you can edit and save on the fly via the full-size LCD screen. Combining the warmth of an analogue recording console with precise digital effects, ProFXxv3+ is an ideal mixer for home studios and live events alike.

Capture your stream or performance at pristine 24-bit / 192 kHz quality with a built-in 2x4 USB-C audio interface, complete with three recording modes: Standard for the full mix with effects, Loopback to include computer audio with mixer signal for streaming, and Interface to record channel 1-2 without effects processing.

Use the dedicated Bluetooth channel to send and receive audio from devices like smartphones and tablets. For podcasters, it's an effortless way to bring in phone calls. For musicians and performers, it's the easiest option for streaming outside music and backing tracks.

Features

7 Onyx mic pres with up to 60 dB of gain and ultra-low noise performance
High-resolution GigFX+ effects engine
Full-colour LCD display for editing and saving effects presets
24-Bit / 192 kHz 2x4 USB-C audio interface
Three recording modes: Standard, Loopback and Interface
Bi-directional Bluetoothr for music playback and caller integration
3-band EQ on all channels
One-knob compression on channels 1-4
Hi-Z switches allow direct connection of instruments
100 Hz low-cut filter and 48V phantom power on all mic channels
Stereo 1/8" input on channel 11/12
Separate FX, monitor and subgroup busses
Headphone output with separate level and blend control
Easily blend between monitoring your computer output and a latency-free feed from the mixer
Waveform OEM recording software Included
Legendary Built-Like-A-Tank design
Solid steel chassis
Tough ABS side protection

Line Inputs: 12
Mic Inputs: 7
Aux Sends: 1
Subgroups: 2
Compressors: 4
Effects: GigFX+
USB I/O: 2x4
USB Type: C
Recording Modes: Yes
Bluetooth w/MixMinus: Yes

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


The best of both worlds, combining analogue drum circuits with samples and Korg's Multi Engine. Versatile step sequencing, built-in effects and seamless connectivity.

Supplier's Notes:
The introduction of Drumlogue marks a paradigm shift for drum machines. It combines the rich and raw power of analogue, the flexibility and convenience of digital, and the deep customisation of a unique SDK. A heavy-duty dynamic sequencer, powerful effects, and intuitive controls make Drumlogue a must-have in any setup.

The power of analogue

Drumlogue features completely new analogue circuitry from legendary Korg engineer: Junichi Ikeuchi (ARP 2600 M, MS-20 Mini, ARP Odyssey). The depth and richness of its sound is on a whole new level. New analogue circuits for bass drum, snare drum, low tom and high tom provide a solid foundation, and elevate tracks with harmonic richness and a thick low end.

The versaility of digital

Drumlogue has 7 digital parts: 6 sample-based and 1 Multi Engine based. The sample-based parts can play a wide selection of pre-loaded PCM samples alongside imported user samples. These can be easily loaded into Drumlogue by connecting to a computer via USB and simply dragging and dropping into its main memory.

Endless creative potential

The wildly popular Multi Engine from Minilogue XD is made even more powerful: in addition to Variable Phase Modulation (VPM) and Noise generator engines, the Multi Engine in Drumlogue features a new user slot able to play fully-fledged synth voices - providing vast sonic possibilities never before heard on a drum machine.

Custom Synths

Synth voices in Drumlogue are so much more than static waveforms. Custom synths can be built to not only generate sound, but can also draw on built-in filters, LFOs, MIDI controlled polyphony

Exclusive "Nano" plugin

Korg has collaborated with popular plugin developer "Sinevibes" to create a brand new synth plugin for Drumlogue: Nano. This exclusive plugin explores the power behind the newly expanded Multi Engine and gives an incredible first taste of the platform.

"Nano" is a full-fledged virtual analogue synth with a broad array of features and customisable parameters. The synth engine has dual oscillators with optional ring modulation, a 4-pole state-variable filter with soft clipping distortion, built-in EG and built-in multi-waveform LFO.

Sequencing powerhouse

At the heart of Drumlogue is a flexible, easy-to-use, and extremely powerful 64-step sequencer. This makes it easy to create complex patterns and polyrhythms that elevates the music creation process. Innovative features are available including per-step probability, per-step alternate trigger patterns, per-step micro offsets, per-track groove patterns and much more. With the clear OLED display, it's also easy to follow and edit your sequences visually.

Chain mode makes creating long and interesting patterns simple. In loop mode you can switch between several variations to play sequences in new and interesting ways. The Motion and Accent recording functions are fast and intuitive, and if you want to try new things on your track, the randomisation function is there to help you.

Effects and customisation

Drumlogue has high-quality effects across three categories that can be used simultaneously: delay, reverb and master effects. The send amounts for delay and reverb effects are set independently, with multiple return points also available. Master effects add that final polish to the sound and can be bypassed on a per-part basis, meaning it's possible to send the effect to specific audio parts. A sidechain bus is also available to the master effects section.

Drumlogue has an audio input, so you can process other instruments through Drumlogue's effect chain, making it an ideal companion for your studio setup.

Connectivity

With a wide range of I/O, Drumlogue can be integrated seamlessly with your rig. A USB-A port supports connectivity with USB MIDI class-compliant devices, meaning volumes can be controlled with the faders on a nanoKONTROL 2, or sounds triggered by the pads on a nanoPAD 2.
It almost goes without saying that Drumlogue easily syncs with other gear via the MIDI in/out, sync in/out, or via USB MIDI.

Four individual outputs are available, in addition to headphone and main L/R. Any part can be assigned to any output, allowing for expanded routing versatility with external processing and multi-track integration.

Ease of use

Drumlogue is incredibly easy to use - having been designed with simplicity and accessibility in mind. The most important parameters for the main drum parts have dedicated knobs on the front panel for on-the-fly adjustments, as well as dedicated volume pots for each part to speed up the mixing process.

A wide and clear OLED screen coupled with a simple UI and 4 dedicated encoder knobs makes the navigation process fast and smooth.

Design

Unlike other drum machines, Drumlogue's main panel is slanted. This offers superior ergonomics and visibility, while a brushed aluminium body and wooden side panels add to the premium look and feel.

Specifications

Polyphony: 11 voices (*)
(*) User synths may be played polyphonically via MIDI, the actual voice count will depend on the synth's implementation

Sound Engine
Analogue:4
PCM / User samples: 6
Multi-engine(NOISE, VPM, User Synthesizer): 1

Number of Programs (including rhythm patterns): 128 (64 preset programs by factory default)
Effects: Reverb, delay, master

Inputs / Outputs
Headphones
OUTPUT, (L/Mono, R/Audio, Out 1-4)
Sync In/Out
Audio In, MIDI In/Out
USB A (To Device) (Only for MIDI controllers)
USB B (To Host)

Power supply: AC adapter (DC9V)
Dimensions (W × D × H): 317 × 189 × 73 mm/12.48" × 7.44" × 2.87"
Weight: 1.4 kg/3.09 lbs.
Included items: AC adapter, Precautions, Quick Start Guide

Notes: Sound:
Vintage Keyboard Sound Engine with six incredibly detailed vintage keyboard types.

Each keyboard type matches a carefully chosen Drive and Tremolo setting to provide an incredibly musical pairing.

The six keyboard types are:

- RdI, early '70s tine electric piano

- RdII, late '70s tine electric piano

- Wr, late '60s reed electric piano

- Clv, 70s struck string Clavinet

- Toy, toy piano

- CP, Yamaha CP80 electric grand piano

128-note polyphony ensures dropout-free performance.

Five stomp box-style effects with direct control@
The effect types are:

- Drive (adds harmonics and distortion)

- Tremolo (Auto-Pan for Rd) or VCM Wah with adjustable depth and rate

- Chorus with adjustable depth and speed

- VCM Phaser with adjustable depth and speed

- Digital or Analog-Type Delay with adjustable time and depth

- Reverb with adjustable depth

Control:
- Based on the FS action found on the flagship Motif XF, HQ (High Quality) Mini Keys provide premium feel and response for fast, accurate and natural playing

- Sustain pedal input allows the sustain function for all electric piano sounds

Mobility & Connectivity:
- Speakers

2W 3cm stereo speaker system lets you play any place, any time.

Specially designed bass reflex port technology enhances bass response for full, rich sound.

- USB

USB "TO HOST" allows MIDI connectivity to your USB-equipped computer or iOS device.

- Audio output

Dual 1/4"unbalanced line outputs provide connection to mixers, audio interfaces, DI boxes and more.

- Audio input

A 3.5mm aux line input lets you connect and hear mobile devices, tablets and more through the instrument.

Battery Operation:
- Battery powered - uses six "AA" batteries with five hours of life

Create your Soundmondo. Inspire and be inspired:
Soundmondo is a free sound sharing community that lets you discover, create and share reface Voices and Set Lists using Google Chrome any place, any time you're online.

Powered by Web MIDI, Soundmondo is simple to use - just connect reface to Chrome and you're ready to create or start browsing.

Notes: Brilliantly powerful trigger module, capable of acting as a master clock and a sequencer, generating gate signals and pulses. Good hands-on control options for live performances.

Supplier's Notes:

The Trigger Riot is a multipurpose trigger module that makes ultra complex patterns of gates triggers and clock pulses. The Riot covers a lot of ground in any Eurorack system from the master clocking for your entire system to algorithmic generation of pulses for envelopes, step sequencers, drums and accents that can venture into highly complex territory driven by simple yet powerful logic and algebra with a dash of pseudo randomness for some unpredictable results.

The user interface allows a great deal of control over pulses with each knob acting as a clock divider, clock multiplier, step injector, time shifter, clock shifter, pulse-width modulator, and an arithmetic probability processor. Now take that control and multiply it by 16 and feed it into 8 outputs for maximum Trigger Riot madness!

Furthermore the interface features a master clock knob, push switches to mute unmute and select rows, and multiple switches to configure, adjust, create loops and save your work for later recall from memory banks.

Trigger Riot integrates nicely in the studio with non-volatile memory, generous synchronization options with external gear including sample accurate sync with DAWs, smart synchronization to other Tiptop modules using SyncBus, and DIN Sync for vintage gear. A precise internal tempo clock generator with tap tempo and BeatSync to manage precise changes round out the features.

Notes: Eight channels of audio and CV sampling with real-time editing and processing. Does basic sampling well but quickly gets creative and weird.

Supplier's notes:
The 'Squid Salmpler' is a Eurorack 8 channel audio & CV sampler. It is designed for immediate real time sampling, editing and mangling within a modular context.

Taking influence from early hardware samplers, The Squid Salmple focuses on usability and instinctive operation, incorporating a proven Pamela's Workout style user interface for minimal screen dependence and a fun, hands on experience.

With support for sampling and playback for both audio and CV, as well as CV control of all parameters, on-the-fly bank loading and saving to USB, The Squid Salmple brings a unique take on old school sampling into the modular realm.

The Squid Salmple comes with a USB Stick containing approximately 90 banks of original carefully curated royalty free samples. This includes a wide range of sounds from classic drum machines and weird synths to field recordings and CV modulations. Banks are provided by both ALM and some of our favourite artists and friends including Mumdance, Solid Blake, Russell Haswell, Lauren Flax, Dave Burraston (NYZ), Sue Zuki, Dungeon Acid, Sasha Lewis and Andrew Duff.

Notes: Collabing with YouTube sensation Andrew Huang, Endorphin.es offer up this impressive multipurpose processor module. Building blocks of stereo filtering, compression, reverb and more offer huge creative potential.

Supplier's Notes:
In collaboration with Andrew Huang, based on his modern music production techniques, Endorphin.es developed a creative audio processor with multiple blocks that can be moved around in order to achieve different flavours for sound design.

Processing unit without fixed structure: intuitively create astonishing and ephemeral timbres, from atmospheric rumbles to heavy or distorted textures.
Creative stereo effect processor with delay, reverb, filter and distortion with quickly explorable routing chain with single button press.
New generation ARM Cortex - M7 processor with 96 kHz 32 bit internal processing.
Lush hall and whooshing reverse reverbs with audio freeze and pre-delay.
Sidechain audio ducking envelope available both internally and externally with additional one knob single band compressor.
Tap delay with maximum delay time up to 2.5 seconds, external clock input with onboard clock divider and 1v/oct time control.
8x oversampled distortion algorithm.
Pre- and post - VCA, tone and volume controls with extra gain.

Power consumption
135 mA +12V
35 mA -12V
0 mA 5V

Dimensions
16 HP
26 mm deep with power ribbon cable connected.

Notes: Fuzz meets synth meets reverb in this clever pedal. Built-in drone VCO, noise generator, LFO and effects allow you to warp and twist input signals into completely new tones and textures.

Supplier's Notes:
Grone 2 Dark Drone machine Pedal Version

Blocks description

Drone VCO:

Generates sound based on equations converted to analogue signals, there are sixteen equations selected by algorithm up pot. Four LEDs indicate equation number in binary mode. Three Pots modify numbers used by the equation, A0, A1 and A2, fourth pot Sample Rate controls pitch and speed of the oscillation. There's an expression jack input, EXP2 for controlling sampling rate.

NOISE GENERATOR: White noise with noise level pot.

Voltage Controlled Filter: MS20 resonant low pass filter, with CUT frequency pot control, RESONANCE, MODULATION 1 amount pot, Expression jack input 1 controls filter cuttoff.

LFO1: Low frequency oscillator routed to MOD1 from VCF, RATE and WAVEFORM shape Pots.

Waveforms are: ramp up, ramp down, square, triangle, sine, sweep, random levels, random slopes

FUZZ Section: gain stage that affects input signal, with controls for input gain and level.

Effects Section: Consists of a chorused reverb with delay, adding octave up or down component, with freeze function

Pots controls:
1-Blend controls mix of effects over final output signal
2-Octave blends mix a pitched signal to the input of the reverb
3-Octave -1 +1 controls tuning of pitch component
4-Repeat controls feedback of delay component
5-Balance controls mixture from reverb and delay.
6-Pitch controls the sampling rate of the whole effects section, modifying delay time and reverb decay.

Footswitches:
1- Synth: mutes or enables the drone VCO and noise generator
2-Filter: Bypass for the VCF
3-Fuzz: Bypass for the fuzz that processes the input signal.
4-reverb: Bypass for the reverb/delay section
5-Freeze: toggles freeze function for reverb section

Jacks:
Input, Expression 1 input (VCF) Expression 2 (VCO sample rate), Output

Notes: Compact but premium 2x4 audio interface from one of the best brands in the business. Superb sound quality with built-in hardware DSP.

Supplier's Notes:
Legendary Sound Quality, Total Portability and Hardware DSP all Come Together in a Beautiful New Design

In 2007, the original Apogee Duet shattered the expectations of what a home studio interface could be. Professional, personal and portable, Duet revolutionised independent recording and empowered musicians, producers and engineers with legendary Apogee sound quality, elegant design and effortless ease of use. Now, the all-new Duet 3 brings next-generation Apogee performance and features to a beautiful ultra-low profile scratch resistant glass and aluminium case.

Duet 3 includes on-board hardware DSP that works with the Symphony ECS Channel Strip* for zero-latency recording with FX. Tuned by Bob Clearmountain, the ECS Channel Strip includes presets custom crafted by the legendary mixer so you can dial in a pro recording sound instantly. Ideal for music creation, voice recording, streaming and even gaming, you can use Duet 3 with your Mac or Windows workstation in your studio or on the go. Take your Duet 3 to the next level with the sleek Duet Dock* accessory for the ultimate ergonomic desktop experience.

Achieving superior sound quality in a digital audio interface requires experienced engineering that artfully orchestrates AD/DA converters, digital clocking, analog circuitry and power management technology to achieve a harmonious blend of carefully selected components and thoughtful design. Duet is the result of decades of innovation and expertise and delivers sound quality unmatched in its class.

Legendary AD/DA Converters

With two inputs and four outputs of legendary Apogee AD/DA conversion, plus two world-class preamps, Duet is the perfect partner for your home and mobile studio. Connect microphones, guitars, keyboard and line level devices to capture every detail. Monitor and mix with the full depth and dimension of your sound through two truly-balanced, line-level analog outputs for speakers. And, power your headphones with a zero-ohm headphone output for a dedicated headphone mix.

World Class Preamps

One of the most critical components for high quality recording is your preamp and the pres in Apogee Duet are world-class. With up to 60dB of gain and 48v phantom power, you can cleanly and precisely capture any audio source with even the most demanding microphones. Meticulous Apogee engineering, keeps noise and distortion down, even as you crank up the gain.

Plug-in to On-board DSP

To capture your best performance, you need to dial in an inspiring sound quickly and easily. And few things are more distracting than latency when trying to record. Duet gives you on-board hardware DSP for FX processing with the Symphony ECS Channel Strip (sold separately) to precisely shape your tone on input and give you great sounding tracks, all while eliminating the delay that can occur while recording. The Symphony ECS Channel Strip, tuned by legendary mixer Bob Clearmountain, includes EQ, Compression and Saturation controls that let you create the optimal blend of channel FX for tracking vocals or acoustic instruments. Choose from multiple hand crafted Clearmountain presets and record with zero latency through Duet's on-board hardware DSP.

Receive 50% off the Symphony ECS Channel Strip from your Apogee dealer when you purchase Duet 3 or when you register on the Apogee website.

The all new Apogee Control 2 software gives you complete control of all Duet functions and features including the Symphony ECS Channel Strip FX running on Duet's hardware DSP. Apogee Control 2 is shared across all current and select previous generation Apogee products and will enable Apogee support and engineering to quickly react to future macOS and Windows OS updates helping to ensure Duet 3 compatibility for your workstation.

Sound quality comes first, but elegant design is a close second. After all, you're always hands-on, controlling listening level and mic pre gain, so why shouldn't the centerpiece of your studio have a high-end look and feel? The Duet multi-function digital controller knob delivers a luxurious-feel for dialing in monitor levels and mic pre gain, while also giving the desktop interface style accents backlit with purple LEDs. Perfectly contoured for ergonomic control on your desktop, the low profile body is topped with scratch-resistant cover glass for a modern look and solid feel.

Duet Dock

Duet set the standard for making music and recording on the go with its small footprint and flexible breakout cable. But when working in your studio, the best way to use Duet 3 is with the all-new Duet Dock*. The Dock positions Duet at the ideal angle for quick adjustments and meter and function visibility. The rear panel connectors on Duet Dock make it easier to organize and connect your cables to Duet too.

*Sold Separately

Notes: The Yamaha MG16 Analogue Mixer. Road Tough. Studio Ready.

The Yamaha MG16 is part of the third generation of renowned MG Series mixers. These compact mixing desks focus on giving you high quality sound for a wide variety of mixing environments. The Yamaha MG16 has the same mic pre amps as their high-end pro mixers. The new MG Series provides serious quality with the reliability and performance capabilities the series is known for.

For more than a century, Yamaha has been building a legacy of superior craftsmanship and innovation exemplified in all of our products, from an unrivalled catalog of world-class musical instruments to touring-grade professional audio. Now in its third incarnation, the MG Series embodies this pursuit of design excellence, and incorporates some of the same technologies developed for use in high-end professional consoles, including studio-quality preamps, powerful digital processing, and a rugged, reliable construction.

With an intuitive, easy-to-use interface, the MG Series boasts an extensive lineup of compact mixing consoles with models ranging from six to twenty channels, suitable for a diverse range of users and applications. For installed, recording, or live music settings, the solid construction and flexible design of these consoles lets you shape your sound with confidence, continually delivering peak performance and a level of sound quality and reliability unrivalled in its class.

Notes: The future of DJing

The Reloop Mixtour Pro exceeds expectations in the tiniest of spaces and provides a professional yet portable solution for the club and festival scene. The ultra-compact DJ controller was developed in close collaboration with legendary DJ & producer, Laidback Luke and is specifically designed to use seamlessly with Algoriddim's award-winning Djay Pro software.

Mixing with up to four decks

Despite its small size, the Mixtour Pro is capable of supporting four-deck mixing with its powerful and intuitive controls. Thanks to the illuminated transport section with dedicated coloured LEDs, users are always informed of whether decks 1 and 2 or decks 3 and 4 are currently active. The aluminium browse encoder and designated load buttons allow for efficient library navigation and instant loading of tracks.

Professional design and FX control

The Mixtour Pro's two channel strips with their trusted design are fitted with all the important controls for a modern DJ setup. Each channel features an electroplated bi-polar sound filter (LPF/HPF) with a dedicated LED indicator, in addition to gain and three-band EQ. The convenient FX paddles allow the user to trigger effects in bursts via FX Hold mode or to apply them indefinitely via FX On mode. A large, electroplated dry/wet knob controls the intensity of the effect, while the two dedicated parameter buttons offer complete control over the effect parameters. The lower performance area is fitted with 45mm Ultra Glide crossfader and line faders, for the smoothest operation in the mix.

Made for Djay & Neural Mix

The Reloop Mixtour Pro unlocks Algoriddim's Djay Pro software and incorporates their revolutionary Neural Mix™ technology into the workflow with dedicated controls. This allows DJs to isolate and manipulate individual drums, instruments, and vocals from any tracks in real time, expanding creative mixing capabilities to a whole new level. This feature is toggled easily and intuitively with the press of a button and controlled via the EQ controls of the two channel strips.

Crossfader Fusion™

The Mixtour Pro is also the first DJ controller to support Algoriddim Djay Pro's revolutionary Crossfader Fusion feature. DJs are now able to select from a range of creative transition styles that are automatically applied when mixing from one song to another, delivering a perfect mix every single time with the simple slide of the crossfader.

Flexible performance pad section

Eight performance pads with RGB lighting provide users with more creative options with a wide range of modes including Hot Cue, Bounce Loop, Pitch Cue, Instant FX, Auto Loop, Sampler, Skip and Neural Mix™. Furthermore, all eight pads can be assigned to control one channel in single pad mode, or four pads can be assigned to a channel each via split pad mode.

Full control: the transport section

The Mixtour Pro's sophisticated transport section enables a smooth and efficient workflow. It features four rubberized buttons for each channel to control Play / Pause, Cue, and Sync respectively, while the signature "Laidback Loop" button independently offers instant looping (In/Out/Exit) with a single control. This transport section also offers secondary layer functions to control Auto Loop, Key Match, Pitch Bend, and Key Shift. The transport buttons also illuminate in 2 different colours representing decks 1 and 2 or decks 3 and 4, respectively, keeping the DJ clearly informed when performing.

USB-C design for multi-platform & device support

The Reloop Mixtour Pro provides impressive compatibility options when pairing it with a device and platform. A smartphone, tablet or computer can all be conveniently bus-powered thanks to the modern USB-C architecture. The unit also houses a second USB-C PD port, capable of up to 85W to efficiently daisy-chain a power supply, allowing the device and controller to be powered simultaneously. Algoriddim's Djay Pro is available for iOS, iPadOS, macOS, Windows, and Android for even more cross-platform versatility.

Stream it!

In addition to performing with locally stored music, the Reloop Mixtour Pro together with Algoriddim Djay offers access to millions of tracks on demand via major streaming servicesj such as Tidal, SoundCloud Go+, Beatport Streaming, and Beatsource Streaming. These different sources can all be mixed together and even combined in the same playlists within Djay Pro.

Powerful audio quality

As the name suggests, the Reloop Mixtour Pro also delivers in regards to professional audio. The integrated 4x Out USB interface with high-quality D/A converters from Cirrus Logic enables first-class 24-bit sound with low latency. Direct connection is provided via gold-plated RCA outputs and a 3.5mm headphone jack.

Features

High-quality, ultra-portable, all-in-one four-deck DJ controller with audio interface
Professional solution for clubs and festivals developed in close collaboration with DJ & producer Laidback Luke
Designed for the award-winning Algoriddim djay Pro software
Integrated 4x Out USB sound card with 24-bit D/A converters from Cirrus Logic ensuring premium sound quality and low latency
USB-C design (bus-powered) with optional power delivery support (85W)
4-deck control: dedicated LED indicator for active decks 3 and 4
Supports revolutionary Crossfader Fusion feature for automated transitions delivering a perfect mix
Neural Mix pad & EQ mode for real-time isolation of drums, instruments, and vocals of any song
Electroplated bi-polar sound filters (LPF/HPF) with LED indicator
8 performance pads with RGB lighting
Split pad mode to assign 4 performance pads to each deck
Single pad mode to assign all 8 pads to a single deck
8 performance modes individually selectable per deck: Hot Cue, Bounce Loop, Pitch Cue, Instant FX, Auto Loop, Sampler, Skip, Neural Mix™
Plug-and-Play: unlocks Algoriddim djay Pro on all available platforms²
FX section for selecting and controlling effects for each deck
2 parameter buttons for setting the effect parameter
2 large electroplated toggle switches (FX paddles) with Hold & On position for burst triggering or constant effect activation
Effect status easily visible via FX-On LEDs
Large electroplated Dry/Wet controller for controlling the effect level
Rubber-coated transport section with four control buttons per deck (Play/Pause, Cue, Sync, Manual Loop)
Laidback Loop mode: instant looping with just one button (In/Out/Exit)
Intuitive deck lighting: the transport section illuminates in a different colour according to the active decks
Shift/mode control for 2nd-layer functions such as Auto Loop, Key Match, Pitch Bend, and Key Shift
Millions of tracks are available on demand within Algoriddim djay Pro via the Apple Musicj, Tidalj, SoundCloud Go+j, Beatport Streamingj and Beatsource Streamingj streaming services
Dedicated controls for main output level, headphone volume, and cue mix
LED chain input signal for level indication
Aluminium browse encoder and load buttons for quick and easy track navigation and loading
Gain and 3-band EQ per channel
Headphone cue buttons per channel
45mm Ultra Glide line faders and crossfader
Gold-plated RCA outputs and 3.5mm headphone jack
Brushed aluminium top panel with high-gloss acrylic plate inlay
Flat design with high-quality components and large, non-slip feet
Multi-platform support compatible with smartphones, tablets, or laptops
MIDI-compatible
Side Kensington lock for theft protection
Optional Premium Modular Bag XT for safe transportation and a solid base to raise the Reloop Mixtour Pro to club setup height
Incl. USB-C to USB-C cable, RCA cable and instruction manual

Internet connection and a Apple Music, Tidal Premium or HiFi or SoundCloud Go+ subscription required. Tidal Premium or HiFi and SoundCloud Go+ subscriptions include access to Beatport Streaming and Beatsource Streaming.

The app's functionality may vary depending on the platform used. Only Pro functions that can be operated with the controller are activated without a subscription.

Technical data

Inputs: USB (type C) DC IN port (max. PD 85 W)
Outputs: Master RCA (unbalanced), headphones 3.5 mm stereo jack, USB (type C) data port
Dimensions: 129(W) x 310(D) x 51(H) mm
Weight: 956 g
Minimum system requirements: Please refer to the manufacturer's specifications for the system requirements of your DJ software.
Incl. USB-C to USB-C cable, RCA cable and instruction manual

Notes: Combining the power of multi-oscillator wavetable synthesis with the percussive detail of sampled sounds, Pianophonic is a powerful hybrid synth engine featuring 8 voices of polyphony. Not limited to Piano sounds, the voice architecture of Pianophonic is extremely versatile and easy to use with the essential controls laid bare on the front panel, and the most significant CV inputs and outputs provided for full integration within eurorack patches.

Taking its inspiration from the wavetable/sampler keyboards of the 90s, Pianophonic revisits a lean and mean approach to digital sound creation but instead with 24bit 48Khz quality and fingertip control of the parameters that really matter.

With a built in SD card and an online re-synthesise utility, allowing users to create their own sound banks, the possibilities for sound exploration are limitless.

Notes: Each generation of VLZ mixers benefits from a reinvestment in performance, all without raising prices. By continuing to ignore the "race to the bottom," VLZ4 benefits from generations of performance improvements like transparent EQ, class-leading negative summing bus architecture and custom-designed op-amps to ensure signal integrity from every input to every output. The result is a mixer that is at the peak of performance and is the obvious go-to compact analog mixer for engineers who demand professional results.

The performance of Mackie's Onyx mic preamps is more than proven. Just check all the amazing reviews and customer testimonials. Their boutique quality sound and unmatched performance rival any high priced, boutique preamp on the market. Adding these flagship preamps to our VLZ4 Series compact mixers underlines our commitment to continually improving the performance of the VLZ line with each generation.

The VLZ4 design goal was simple: every VLZ4 mixer must have the highest headroom and lowest noise possible. Strict attention to component quality and tolerances has led to innovations like our custom M80 op-amps and class leading negative summing bus architecture that add yet another level of assurance that a Mackie VLZ4 mixer is the right choice for your professional audio application.

Mackie VLZ mixers are truly built like a tank. From beer spills to drops from moving vehicles, the testimonials are as endless as the applications Mackie mixers serve. The VLZ4 series is certainly no exception. With a nearly indestructible steel wrap around chassis and features like grime resistant rotary sealed pots, you can be sure that buying a Mackie VLZ4 mixer is a solid investment.
VLZ4's new black powder coat finish, cockpit inspired controls and high contrast knobs not only optimise your mixer's usability in low light scenarios, it also means your mixer looks as good as it performs.

Mackie's VLZ4 line is extremely comprehensive, offering mixers of every channel count, every price point, for every application. From the ultra compact 402VLZ4 for desktop applications to the tour friendly 3204VLZ4, you can be sure there is a VLZ4 mixer with the right feature set for your needs