100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

View:
Options
Items 1 to 50 of 2,482 on page 1 of 50
1  2  3  ...  50  »
Notes: ARS's new flagship tabletop mixer is a serious piece of kit. Hand-made in Japan using proper audiophile-spec components, it's a strong contender for the title of ultimate rotary mixer. DJ Harvey's already bought one. We don't blame him.

Supplier notes:
ARS MODEL 9900 DJ Mixer is a Japanese made, 6 channel rotary mixer with 3 band EQ on each channel. The ARS 9900 is Alpha Recording System's flagship table-top mixer, featuring a 3 band isolator on the master. Potentiometer and switch are ALPS, the VU meter is made by Sifam. Each channel has post fader send, return and effect loop.

A long time in the development phase, this mixer is a beautiful example of Japanese hand-made precision workmanship.

Frequency Response: +/- 1dB, 20Hz-20Khz
Input: 3 x Phono: 47K Ohm/9 x Line: 20K Ohm
Effect Loop: RCA Unbalanced Impedance 20K Ohm
Return: RCA Unbalanced Impedance 20K Ohm

House Output: RCA Unbalanced Impedance 1K Ohm/ XLR Balanced Impedance 100 Ohm
Booth Output: RCA Unbalanced Impedance 1K Ohm/ XLR Balanced Impedance 100 Ohm
Tape Output: RCA Unbalanced Impedance 1K Ohm

Effect Loop: RCA Unbalanced Impedance 600 Ohm
Effect Return: RCA Unbalanced Impedance 600 Ohm

Power Consumption: 30w
Power Requirement: US-115V/EU-230V(Selectable) 50/60Hz
Front Panel Colour: Black
Read more
 1 in stock $5,721.25
Click for better price!
quote 745725
Cat: 743616 Rel: 29 Aug 19 • View all DJ controllers
 
4-channel performance DJ controller for Serato DJ Pro
Notes: Flagship Serato business from Pioneer. The brand's top-of-the-range DDJ-1000 controller gets reconfigured for Serato. Same hardware layout as the standard version but optimised for DJ Pro instead of Rekordbox.

Supplier notes:
The Serato-compatible version of our popular DDJ-1000 is here - meet the DDJ-1000SRT. This 4-channel DJ controller for Serato DJ Pro is designed to feel just like our club-standard CDJ+DJM setup. You'll enjoy low-latency, full-size jog wheels and a slick MAGVEL FADER for tight scratching. And with On Jog Display, which shows you important track information in the centre of each jog wheel, you can concentrate on the crowd, not your laptop.

Build excitement on the dancefloor and create huge drops using 4 Sound Colour FX and 14 Beat FX. The DDJ-1000SRT comes with a free voucher for Pitch 'n Time DJ, enabling you to get creative with advanced key-related features. With multiple inputs and outputs, you can enhance your setup by connecting external equipment like CDJs, the DDJ-XP1, or turntables. This Serato DJ Pro controller will take your gigs to the next level.

Big Jog and Magvel Fader:
Scratching feels intuitive thanks to the full-size jog wheels, which you can set to your preferred resistance using Jog Adjust, and a MAGVEL FADER. Highly durable for more than 10 million movements, the MAGVEL FADER makes intricate performances feel easy.

Club-style layout:
The buttons and knobs on this Serato DJ Pro controller are arranged in the same way as those on our club-standard NXS2 DJ equipment. As a result, transitioning between this setup and gear you find in DJ booths is a breeze.

On Jog Display:
See all the information you need via the full-colour, high-definition LCD screen in the centre of each jog. Monitor playback time, BPM, playback position, and more. This feature's easy to use, with the display matching the Serato DJ Pro GUI.

Professional FX:
Enhance tracks using 4 popular Sound Colour FX - Pitch, Filter, Dub Echo, and Noise - from our DJM-series DJ mixers, and get creative with 14 Beat FX. You can instantly reference BPM and the name of the selected FX thanks to the dedicated Beat FX screen.

Well connected:
The DDJ-1000SRT has 4 inputs so you can connect to CDJs or analogue turntables, and use it as a stand-alone DJ mixer. You can also connect directly to PA speakers and microphones thanks to a Booth, 2 Master, and 2 Mic inputs.
Read more
 1 in stock $1,393.12
Click for better price!
quote 743616
Cat: 712144 Rel: 29 Aug 19 • View all MIDI controllers
 
Adjustable range mallet keyboard controller
Notes: The malletSTATION model EM1 is a full sized 3.0 octave adjustable range electronic mallet controller designed for all players in any genre, from the beginning student through the gigging professional.

The adjustable low note range function allows you to set the fundamental diatonic note of the instrument to what you need - low D xylophone? No problem! The malletSTATION is powered exclusively by Mac, PC, iPad, iPhone, and Android devices through USB Bus Power, allowing performance almost anywhere with minimal set-up and equipment.

Designed in collaboration with Keith McMillen Instruments, malletSTATION's tech-forward design features KMI's Smart Fabric Sensor technology allowing the silicone bar material to have an extremely sensitive, natural response, including mallet dampening and aftertouch control, and all can be easily tailored to your individual playing style.

The EM1 features a master control section, with 3 programmable faders, 4 programmable buttons, and the fixed function low note and octave shift buttons. In addition, three assignable pedal inputs allow for flexibility in performance such as sustain, expression, or any MIDI parameter of your choice. These controls are fully programmable through a software editor so changing your configuration is as easy as clicking a mouse.

The EM1 malletSTATION is also the most affordable mallet percussion controller on the market, street priced at just $999. The ultra-thin, lightweight chassis allows for easy portability, and the flexible mounting options provide many different ways of using your instrument. This is the only controller that will grow with you throughout your playing career - from music apps on your phone or tablet, to professional digital audio workstations and sound libraries - your sounds, and even the instruments you play, are only limited by the software you run.
Read more
 1 in stock $1,027.92
Click for better price!
quote 712144
Cat: 745770 Rel: 29 Aug 19 • View all Hi-fi turntables
 
Turntable system featuring the latest coreless direct drive motor for high-precision stable rotation - black
Notes: The technologies acquired through the development of the SL-1200 Series and the high-end SL-1000R model were lavishly inserted into the motor drive unit, a key part of the turntable. The motor exclusively tunes the single-rotor, coreless direct drive motor adopted by the SL-1200GR in order to read the high rotation accuracy and high-precision signals of the record. Optimal motor control is conducted for the inertial mass of the two-layer structure platter on which the vinyl record is placed with deadening rubber on the entire back surface to eliminate unwanted resonance in the aluminium die-cast platter to eliminate the rotation irregularity called cogging. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fibre to achieve a two-layer construction. The insulator is comprised of a spring and rubber to provide optimal vibration-damping characteristics. The tonearm is a static-balance universal S-shape tonearm, another Technics tradition. By adopting a high-precision bearing using the same gimbal suspension construction and machined housing as the SL-1200 Series, high initial sensitivity is achieved. In addition, reliability has been improved by incorporating a removable power cable and gold-plated terminals, which have less sound quality degradation, for the PHONO and LINE terminals.

Complete Turntable with a Built-in Phono Equalizer and Cartridge In order to enjoy playing analogue records more comfortably, the SL-1500C features a built-in phono equalizer and bundled cartridge. There is no need to separately prepare either one, making it easy to link with a wide range of audio equipment. The shield structure of the built-in phono equalizer suppresses the effects of external noise and noise from the power supply. It is also equipped with a switch to turn the LINE output off when it is not being used. The turntable has been designed to thoroughly shut-out adverse effects to the PHONO output. The dedicated power supply for the PHONO output terminal is isolated from the power supply for the LINE output terminal, and has been designed to prioritize sound quality by minimising the wiring of the PHONO signal. The isolated terminals also prevent wiring mistakes. An Ortofon 2M RED cartridge, which is highly acclaimed as an MM cartridge, has been selected for the bundled cartridge. Combining this high-quality cartridge with the performance of the SL-1500C will maximise the sound quality of vinyl records.

When the tonearm reaches the end of the record, the Auto Lifter function automatically raises the cartridge. This prevents unnecessary wear on your valuable vinyl records and stylus. By embedding the Auto Lifter function in the base portion of the tonearm, it eliminates impacts to the tonearm. Due to a simple design that doesn't use motor power, there is no electrical or vibrational impact and it will not prevent the movement of the tonearm. In response to requests from many users regarding the Auto Lifter function, a design that prioritises sound quality was adopted. The functions required to playback records were kept to a bare minimum, achieving simple and easy-to-use operability.

The SL-1500C sports a simple design without unnecessary frills, while retaining the superb operating feel that is a Technics tradition. The attractive appearance lets you enjoy playing records to your heart's content.
Read more
 2 in stock $935.33
Cat: 745771 Rel: 29 Aug 19 • View all Hi-fi turntables
 
Turntable system featuring the latest coreless direct drive motor for high-precision stable rotation - silver
Notes: The technologies acquired through the development of the SL-1200 Series and the high-end SL-1000R model were lavishly inserted into the motor drive unit, a key part of the turntable. The motor exclusively tunes the single-rotor, coreless direct drive motor adopted by the SL-1200GR in order to read the high rotation accuracy and high-precision signals of the record. Optimal motor control is conducted for the inertial mass of the two-layer structure platter on which the vinyl record is placed with deadening rubber on the entire back surface to eliminate unwanted resonance in the aluminium die-cast platter to eliminate the rotation irregularity called cogging. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fibre to achieve a two-layer construction. The insulator is comprised of a spring and rubber to provide optimal vibration-damping characteristics. The tonearm is a static-balance universal S-shape tonearm, another Technics tradition. By adopting a high-precision bearing using the same gimbal suspension construction and machined housing as the SL-1200 Series, high initial sensitivity is achieved. In addition, reliability has been improved by incorporating a removable power cable and gold-plated terminals, which have less sound quality degradation, for the PHONO and LINE terminals.

Complete Turntable with a Built-in Phono Equalizer and Cartridge In order to enjoy playing analogue records more comfortably, the SL-1500C features a built-in phono equalizer and bundled cartridge. There is no need to separately prepare either one, making it easy to link with a wide range of audio equipment. The shield structure of the built-in phono equalizer suppresses the effects of external noise and noise from the power supply. It is also equipped with a switch to turn the LINE output off when it is not being used. The turntable has been designed to thoroughly shut-out adverse effects to the PHONO output. The dedicated power supply for the PHONO output terminal is isolated from the power supply for the LINE output terminal, and has been designed to prioritize sound quality by minimising the wiring of the PHONO signal. The isolated terminals also prevent wiring mistakes. An Ortofon 2M RED cartridge, which is highly acclaimed as an MM cartridge, has been selected for the bundled cartridge. Combining this high-quality cartridge with the performance of the SL-1500C will maximise the sound quality of vinyl records.

When the tonearm reaches the end of the record, the Auto Lifter function automatically raises the cartridge. This prevents unnecessary wear on your valuable vinyl records and stylus. By embedding the Auto Lifter function in the base portion of the tonearm, it eliminates impacts to the tonearm. Due to a simple design that doesn't use motor power, there is no electrical or vibrational impact and it will not prevent the movement of the tonearm. In response to requests from many users regarding the Auto Lifter function, a design that prioritises sound quality was adopted. The functions required to playback records were kept to a bare minimum, achieving simple and easy-to-use operability.

The SL-1500C sports a simple design without unnecessary frills, while retaining the superb operating feel that is a Technics tradition. The attractive appearance lets you enjoy playing records to your heart's content.
Read more
 1 in stock $935.33
Cat: 718641 Rel: 02 Sep 19 • View all Audio & MIDI interfaces
 
High-spec 8 channel dual mode interface/ADAT expander in studio-friendly rack format
Notes: The rackmount incarnation of Arturia's audio interface range is a monster, with a total of 8 pre-amps, 16 inputs and 20 outs. A lot of recording power in a small package. Ideal for hardware setups.

Supplier notes:
The Arturia AudioFuse 8Pre is a dual-mode interface and ADAT expander which boasts 8 channels of premium analogue audio, rock-solid sync, USB-C, and optical connectivity. With our award-winning lineage of pristine analogue quality, AudioFuse 8Pre is destined to become the expander of choice in studios and creative spaces around the world.

When you're putting your heart and soul into your music and productions, you need to know your audio is in safe hands.

AudioFuse 8Pre offers unrivalled quality at its price point. The 8 Discrete Pro- preamps and analogue signal path will let you truly "hear" your audio for the first time. The super-low Equivalent Input Noise (EIN) lets you capture every subtle detail, while the huge input gain will drive even the most demanding low-output mics. All this with a totally flat frequency response for total transparency. The superb quality doesn't stop there, AudioFuse 8Pre also features the best A/D converters available.

If you're a recording professional you know that no two days are the same. You need gear that gives you the versatility you need to be prepared for the unexpected.

AudioFuse 8Pre can fulfil any studio role. You already have a powerful interface, but need more inputs? AudioFuse 8Pre is the perfect ADAT preamp expander. Want to record multiple channels, but don't own an ADAT-expandable interface? AudioFuse 8Pre can connect directly with your computer so you can record multi-tracked instruments all at once. It's a high-performance audio interface with USB connectivity, speaker outputs and independent headphone output.

Use on its own; expand your existing interface; cascade 2 AudioFuse 8Pre together via ADAT for 16 superb preamps. AudioFuse 8Pre does it all.

Sometimes it's the little things that matter most. You need your gear to complement and enhance the way you work, and that's the driving force behind AudioFuse 8Pre.

AudioFuse 8Pre is easy to use, with one-button, one-function design, and features backward-compatible USB-C connectivity for super compatibility. It's housed in a robust metal chassis, and the included rack ears can be mounted to either face forward or down, letting it stand freely or be integrated into your 19" racks depending on your setup. It also features ADAT in, so you could send your musicians cue mixes using its headphone output.

We've spent years working together with studios, producers, and musicians at all levels to minimize the "pain points" other interfaces give you on a daily basis. AudioFuse 8Pre is the result.

AudioFuse Creative Suite:

AudioFuse 8Pre comes complete with the AudioFuse Creative Suite, an ever-evolving collection of software effects and instruments that will let you add your own unique signature to your music. Combining favourites from our award-winning "You'll Actually Use" series with Analog Lab Lite, AudioFuse 8Pre lets you also enjoy legendary signal processing effects and iconic synth sounds. Colour the pristine inputs of AudioFuse 8Pre with stunning vintage effects!

Box contents:

- AudioFuse 8Pre unit
- Power supply
- USB cable
- DiscretePro Certificate
Read more
 2 in stock $647.14
Click for better price!
quote 718641
Cat: 713133 Rel: 23 Aug 19 • View all Electronic drums
 
9-pad drum controller with 32GB internal memory & onboard stereo sampler
Notes: Introducing the Strike MultiPad from Alesis - the first percussion pad incredible enough to earn the Strike name. The Strike MultiPad is an incredibly capable and versatile device that far surpasses the performance and creative potential of any previous electronic drum pad. Never before has such sheer percussive power been built into a single unit or been so easy to play. SAMPLE anything you want - any sound, any effect, from anywhere. EDIT your samples and loops with the five built-in effects processors. LOOP-based recording of your performance is a snap, either from the samples you created or the live audio looper. PERFORM better, faster, with more creativity, versatility and capability than any other drum pad, anywhere.

The Alesis Strike MultiPad has over 7000 built-in sounds, 32GB of storage, and the ability to record samples from any source (smartphone, mic, USB, and virtually any audio device). To control this huge library of factory and user-created sounds are 9 velocity-sensitive pads, each with customisable RGB lights. These easily-configurable pads ensure you'll never miss a beat, even on dark and foggy stages.

Five built-in effects processors (3 kit FX, 1 master FX, 1 comp/EQ) and a Custom Effect Control give the MultiStrike even more sonic potential, letting you personalise your sounds and loops to your exact requirements. The built-in Loop Recorder means users can create custom loops in real-time, bringing the potential for complex, layered performances, or providing the inspiration for new creative sessions.

The MultiPad's stunning 4.3" colour screen makes editing samples a breeze, and lets you work with audio files away from the tether of your computer. The standalone nature of the MultiPad makes it ideal for performers who need to make quick adjustments. With its clear user-interface, you'll always be ready to react to whatever the session demands.

The Strike MultiPad is built for the studio and the stage with its wide range of connectivity options. Three outputs can send independent audio to Main, Aux, and Headphone, letting users achieve the perfect main/monitor mix setup. An additional 2-channel USB audio interface provides a quick and easy way of getting connected to a computer. Copies of Ableton Live Lite and Pro Tools | First are bundled with the MultiPad, so you'll be able to make music, straight out the box.

The Strike MultiPad can also be expanded with its three trigger inputs and dual foot-switch inputs; ideal for acoustic players creating a hybrid setup, or for those who wish to create a full electronic kit setup using hi-hat and kick pedals, or additional pad triggers.
Read more
 2 in stock $622.17
Click for better price!
quote 713133
Cat: 740060 Rel: 23 Aug 19 • View all Preamplifiers
 
Versatile, great-sounding front end for recording & live sound
Notes: With superb audio specifications and connectivity and featuring an outstanding microphone preamp, the TASCAM SERIES 8p Dyna is a great choice for both studio and stage. Housed in a rugged 1U rack-mount casing, its dual S/MUX optical ports make it a perfect expansion unit for a TASCAM SERIES 102i or SERIES 208i or other S/MUX-equipped audio interfaces including ADAT, or use it as a stand-alone front end.

Each SERIES 8p Dyna channel also features individually switched +48V phantom power for use with condenser mics, and an easy-to-use, single-control analog compressor with true bypass.

A Superior Front End for Studio and Stage:

TASCAM has long been known for transparent, natural, ultra-low-noise preamps, and the eight TASCAM no-compromise HDIA (High Definition Instrumentation Architecture) preamps in the SERIES 8p Dyna are its best preamps yet; the noise level (EIN) is at -127dBu, the THD is 0.0007%, the dynamic range is 116dB, and the crosstalk is 119dB. Each SERIES 8p Dyna channel also features an easy-to-use, single-control analog compressor with true bypass for handling hot input signals and creating smooth audio input.

Versatile Inputs:

With two instrument/microphone combo inputs on the front panel, you can quickly plug in mics, guitars, bass and more. Six balanced mic/line inputs grace the rear. Every microphone input has individually switched +48V phantom power for using different types of microphones such as Dynamic, Condenser, Ribbon and vintage for proper operation and safety. It adds up to a multi-purpose front end for recording and live sound.

Expand Your Interface or Other Device:

Dual S/MUX optical outputs on the rear of the SERIES 8p Dyna enable you to use the unit as a front end expander for S/MUX-equipped audio interfaces, such as TASCAM's SERIES 102i and SERIES 208i, and Celesonic US-20x20. ADAT compatibility is also available. With two S/MUX outputs, you can send all eight SERIES 8p Dyna channels at up to 96 kHz (four channels at 176.4 or 192 kHz), dramatically expanding your system's capabilities.

Send to Anything:

The SERIES 8p Dyna's eight line-level analog channel outputs are provided on both 1/4-inch balanced TRS connectors and balanced 25-pin D-Sub connectors. Route signals to interfaces, recording mixers, front-of-house consoles, and pretty much anything else. Connect its D-Sub outputs to a TASCAM ML-16D or ML-32D Analog Dante converter, and it becomes a pristine front end for an audio-over-IP network.

The Features Professionals Need:

From its high-end preamps to its versatile outputs, the SERIES 8p Dyna is a thoroughly professional product, right down to its rugged metal 1U rack-mount enclosure. Word clock in and out BNC connectors with an In/Out/Thru switch enable proper synchronization of digital signals. Front-panel analog overload indicators, compression indicators, and digital peak and level meter bars let you monitor the unit's performance. Yet the SERIES 8p Dyna is simple to operate so you can stay focused on the task at hand.
Read more
 1 in stock $556.62
Click for better price!
quote 740060
Cat: 747958 Rel: 01 Jan 90 • View all Synthesisers
 
Reprogrammable synthesiser & sound processor - 2019 version
Notes: Your favourite weirdo synth gets a big update. The M model adds a built-in speaker and mic, battery operation and MIDI sockets. A portable instrument with big creative potential.

Supplier notes:
The Organelle has grown from a 'device' to a full-fledged instrument and can keep up with your new musical ideas anywhere you go and anywhere they take you.

New features liberate the Organelle so it's ready to go at any time - just turn it on and play in impromptu music environments. It offers an immediate, full-spectrum music-making experience - be playful or intentional in the studio or wherever you find inspiration. You're now free to make music in an easier way.

Four new features to the Organelle:

- Built-in Speaker
- Built-in Microphone
- Battery Power
- MIDI Jacks

The Organelle has also been upgraded with a faster processor, twice as much RAM, and an improved web interface for patch management and link sessions.

In other words, with its new onboard mic, speaker and 'AA' battery power:

- Making music with the Organelle is more direct and adaptable to situation/user (less gear needed)
- The Organelle is portable and autonomous
- The Organelle is a more powerful instrument that also affords more spontaneous/silly opportunities
Read more
 1 in stock $549.34
Cat: 745786 Rel: 09 Sep 19 • View all Synth modules
 
52HP 8-channel, 16-step-button Eurorack step sequencer with breakout modules
Notes: A-157 is a trigger sequencer subsystem that generates eight trigger signals controlled by a 8x16 LED/button matrix (some customers call it "Miniature Schaltwerk" as it is based on the same matrix as the no longer available Schaltwerk).
The subsystem contains three modules:

A-157-1: 8 x 16 LED/button matrix and function addressing buttons/LEDs
A-157-2: Trigger Output module
A-157-3: Control Inputs module

The LED/button matrix module A-157-1 is the core of the subsystem. It is used to set or reset the trigger event on each of the 16 steps of each of the 8 rows. In addition the buttons and LEDs of the matrix are used for other functions too (like setting the first and last step of each row or addressing the preset memory).

The Trigger Output module A-157-2 outputs the 8 trigger signals and has an LED display for each trigger available.

The Control Inputs module A-157-3 has manual controls and trigger inputs available for the basic control functions start, stop, reset and clock. In addition four functions inputs are available which will be used in future firmware versions to assign these inputs to special functions (e.g. shifting a row left or right by means of an external gate/trigger signal or a second set of start, stop, reset and clock for individual rows).
Read more
 1 in stock $487.96
Click for better price!
quote 745786
Polyend Preset Module (synth module)
Cat: 732317 Rel: 11 Sep 19 • View all Synth modules
 
Macro controller & sequencer - 22HP
Notes: The 22 HP interface is simple, clean and streamlined. At first glance, Polyend Preset module might look like simple a digital preset manager for Eurorack systems, but it's much more than this. Its vast implications make it a very smart companion for your modular system. But let's start from the basics. With the use of 9 LED coloured clickable encoders, Preset allows you to store up to 9 different CV output values in 32 banks of 32 presets. Yep, 1024 in total!

It's capable:

Program the notes sequences using one of the 32 build-in musical scales. Record the automation using the encoders or external source.

Four modes, totally different possibilities:

Depending on what you want to achieve, there are four modes you can choose from: First, Next, Channel and Note.

Both First and Next modes are perfect for building your unique polyphonic synthesizer.

The Channel mode lets you choose which MIDI Channel is responsible for which voice. This mode is what the majority of users utilise to connect DAWs or external sequencers.

The Note mode translates data received from MIDI Notes C through G and directs them into the corresponding voices (no matter the octave). This scenario works excellent for triggering drums from drum pads or drum triggers.
Read more
 More than 10 in stock $431.76
Click for better price!
quote 732317
Cat: 731183 Rel: 30 Aug 19 • View all Synth modules
 
5U version of the Noise Engineering dynamic wavetable oscillator
Notes: Cursus Iteritas Magnus is an oscillator that works from a dynamically generated wavetable. It gives the user spectral-like controls over three different modes based on different conceptualizations of frequency: Fourier, which uses sine waves; Daubechies, using wavelets; and Walsh mode, using the Walsh transform. Cursus Iteritas Magnus parametrizes a wide variety of sounds, but because the sounds are all based on orthogonal functions, it has a musical tone structure and can produce an extremely wide variety of harmonic sounds

Cursus Iteritas Magnus is the 5U version of Cursus Iteritas.
Read more
 1 in stock $402.63
Click for better price!
quote 731183
Cat: 732315 Rel: 11 Sep 19 • View all Synth modules
 
MIDI-CV converter module for Eurorack - 14HP
Notes: Eight-voice modular synthesis? Yes please. Updated version of the Poly splits your MIDI signal to CV and gate for fully polyphonic action. Chain multiple units for even more multi-voice madness.

Supplier notes:
The Polyend Poly 2 module is a polyphonic MIDI to CV converter Eurorack module, and it will change how you interact with your sequencers, controllers, DAW, and more. This powerful module features MIDI I/O plus USB A and USB B inputs, with a total of four Gate outputs, four Pitch outputs, and 12 outs for CV (CC 0-127) signals. And using the Smart Thru connection, you can daisy-chain multiple Poly 2 modules together for even more voices. And Sweetwater was excited to report that Poly 2 is even compatible with the MPE (Multidimensional Polyphonic Expression) standard used in innovative controllers such as the Roger Linn Design LinnStrument and the ROLI Seaboard series. Once you've explored the polyphonic expression the Polyend Poly 2 module is capable of, you'll never want to be without it.

No matter what kind of MIDI controller you use - keyboard, ribbon controller, pressure pad, or whatever - the Poly 2 module offers built-in scale filtering rewards you with highly musical output. Select a scale, and only the notes within that scale will be passed along to your patch destinations. This is different from scale quantization, which forces ANY input to trigger the note its closest to in the scale, and can make it much more enjoyable to use alternative MIDI controllers with the Poly 2 module.
Read more
 More than 10 in stock $397.43
Click for better price!
quote 732315
Cat: 732306 Rel: 09 Sep 19 • View all Synth modules
 
Stereo thru-zero state-variable VCF - 16HP
Notes: The only module named after a Swedish botanist? Possibly. Relentless synth innovator Dave Rossum pushes the boundaries again with a state-variable stereo filter offering through-zero frequency modulation. Sounds complicated. Sounds good.

Supplier notes:
Following in the tradition of Evolution and Morpheus, LINNAEUS represents yet another Dave Rossum innovation in filter technology.

LINNAEUS is a stereo state-variable filter that provides the unique ability to linearly modulate its resonant frequency through zero into negative frequency, while maintaining stability. With extensive voltage control of nearly every parameter, Linnaeus lets you manipulate the filter's natural response curve in new ways, to create both subtle and dramatic timbral effects. And with a "one-knob-per-parameter" interface, LINNAEUS inspires sonic creativity that invites (and rewards) real-time interaction.

LINNAEUS's cutoff/resonant frequency is exponentially voltage controllable from sub-audio to ultrasonic frequencies, while its resonant gain (Q) is exponentially voltage controllable from 0dB to greater than 60dB.

LINNAEUS's channel output response characteristics are independently and continuously variable from Lowpass, through Bandpass, Highpass and Notch, to Low and High Shelving characteristics. Voltage control of the response characteristics are independently selectable for each of the two channels.

The linear thru-zero modulation is provided by an integrated modulation oscillator and/or an External Linear FM modulation input.

The voltage-controllable modulation oscillator can track the filter's exponential frequency or operate independently. The modulation oscillator's output waveform is continuously variable from Off through Sine, Triangle, and Sawtooth, to Square. The modulation oscillator output is summed with the external linear FM input and applied to the modulation index VCA, which controls the linear thru-zero modulation index from zero to 8X. The modulation index is, of course, also voltage controllable.
Read more
 5 in stock $394.32
Click for better price!
quote 732306
Cat: 732823 Rel: 05 Sep 19 • View all Synth modules
 
Nutube-based distortion module - 18HP
Notes: The M T2D dual triode distortion is a Nutube-based distortion module for the Eurorack format, offering two independent channels which can be patched separately for parallel processing, stereo, or multiple sources, or used in series for more complex distortion of a single source (or simply extreme distortion settings).

Spectral tilt filters before each triode stage alternately boost or cut high and low frequencies for different harmonic emphasis. These filters also affect the feedback loops, and can interact in very interesting ways with high feedback settings. The individual tube bias controls can also have a strong influence in combination with high feedback levels, in addition to more subtle shaping of the distortion when feedback levels are low.

Independent control of input level, tube bias, feedback level, and dry/wet mix is available for each channel, with CV inputs for the bias and mix controls. The CV inputs for the mix controls also have dedicated attenuators. A global plate voltage switch offers two different character options, for either smoother distortion or more severe clipping.
Read more
 3 in stock $372.46
Click for better price!
quote 732823
Cat: 745784 Rel: 09 Sep 19 • View all Synth modules
 
Analogue sequencer for CV's & trigger/gates
Notes: The Doepfer A-155 has two CV rows, each with selectable voltage range, glide and sample & hold options. Three trigger rows and a one gate row. Logic inputs for clock, reset, start and stop. It's even possible to insert external signals per step instead, overriding the CV generated by the 2nd row's potentiometer. The A-155's functions can be expanded by the A-154 Sequencer Controller, as it's an entire control unit with step number limitation, voltage controllable clock generator, variable gate length and a number of playback modes.

Features of the analogue rows (knobs):

- 8 potentiometers (knobs)
- Lower row: Scale (knob), voltage output range 0 ... ~ +6,5V
- Upper row: 1V/2V/4V (octave range switch for exact VCO control), voltage output ranges 0 ...1.0V / 0 ...2.0V / 0 ...4.0V
- Glide time (knob), same as portamento or slew limiter
- Glide Control (control input for switching glide on/off)
- S&H Control (control input for internal S&H, works like A-148)
- Pre Glide/S&H-Out (analogue output before S&H and glide unit, especially required when external audio signals are used as inputs of the lower row)
- Post Glide/S&H-Out (analogue output after S&H and glide unit)
- Lower row: external inputs for the 8 steps (switched jack sockets), control signals or audio signals may be used as inputs (allowed voltage range -5V...+12V), the knobs of the lower row are working in this case as attenuators

Features of the trigger rows (switches):

- 4 Trigger/Gate tracks with 2 rows of switches
- Toggle switches of 1-0-1 type (with middle position), which can be used to send a trigger/gate to the track above or below or to send no trigger/gate (middle position)
- 3 trigger rows (i.e. short pulse for each step set, pulse width corresponds to the pulse width of the clock/step input signal)
- 1 gate row (i.e. a high signal is applied during the length of the step set)

Control inputs and buttons:

- Step (defines the tempo of the sequence, same as clock or trigger input)
- Reset (resets all rows to step 1)
- Start (starts the sequence at the momentary position)
- Stop (stops the sequence at the momentary position)

Step and Reset are compatible to the MIDI interface A-190, i.e. in combination with the A-190 the A-155 may be synchronized via MIDI. The quantizing module A-156 can be used to quantize the infinite analogue voltages coming from A-155 into discrete semitone steps (multiples of 1/12V). Without MIDI interface e.g. a LFO rectangle output can be used to define the tempo of the sequence.

The sequencer controller A-154 adds a lot of new functions to the A-155 (e.g. voltage controlled addressing, forward/backward/pendulum/random mode, voltage control of first and last step, voltage controlled clock and gate length, step skipping, combination of several A-155 in parallel/serial mode and many more).
Read more
 1 in stock $306.91
Genki Instruments Wave Ring Controller (Bluetooth MIDI controller)
Cat: 744609 Rel: 06 Sep 19 • View all MIDI controllers
 
Wearable Bluetooth MIDI controller
Notes: Wave is the ring that allows musicians to easily control sound, shape effects and send commands with the motion of their hands. It offers six functions that can be used individually or combined in any way you like: Tilt, Pan, Roll, Vibrato, Tap, Click.

Four different motions allow you to control any parameter in a new way. By tapping any surface you can trigger notes or samples. Easily accessible buttons on the ring allow you to cycle between presets, send commands and simply pause Wave so you can move your hands freely without changing anything.

You can easily customize each function to suit your setup. You can for example customize:

- Movement range
- Sensitivity of taps (how hard you need to hit the surface)
- CC values of output
- Which note values are sent out by taps and button clicks

Users can use Wave with Softwave, a software layer that allows users to intuitively map movements to MIDI messages or host AU/VST3 plugins and create their own presets. Softwave comes for free with every Wave and has a built-in synthesizer engine so users can start playing right away.

With the purchase of Wave users also receive access to Native Instrument's Reaktor Blocks which includes Waveblock. Waveblock connects Wave instantly to Blocks and allows users to combine Wave out of the box with Reaktor's powerful synthesis engine.

Wave also works as a stand alone MIDI controller that connects to your DAW. Each function can be mapped to control different parameters directly within your DAW.

The Wavefront module is the Eurorack receiver for Wave that allows Wave to connect to modular synthesizers. With Wavefront you can completely bypass the computer and bring unprecedented sound control, effect shaping and manipulation to modular setups.
Read more
 1 in stock $287.14
Click for better price!
quote 744609
Cat: 742229 Rel: 05 Sep 19 • View all Synth modules
 
Low pass filter, VCA & distortion with brass touchpoints - 14HP
Notes: The 100 Grit is a touch-controlled distortion unit inspired by the output section of a vintage synthesizer. Sonically it can range from subtle tone shaping to complete sonic obliteration depending on the positions of the knobs and output chosen
.
The 100 Grit consists of a low pass filter, VCA, and distortion section with 8 touch points, voltage control overdrive, resonance, and frequency, along with a plethora of feedback paths allowing it to operate as a hands-on performance instrument with or without any input.

The touchpoints enable touch-controlled resistive patching between the cv points (gain, frequency, and resonance), sensitive points in the distortion circuit, and different distortion outputs for a mix of touch-controlled audio rate modulation and crackle box-like noise freakouts.

The low pass filter is a 24dB self-oscillating transistor ladder type with a jumper selectable resonance compensation scheme allowing more bass and volume at higher resonance settings.

The VCA is an OTA based circuit, which when pushed past 75% will impart a soft distortion characteristic, turning a triangle wave into a sine before being finally driven into a square wave close to max. If the levels are kept lower it is a reasonably clean vintage-style output section.

The distortion circuit is driven by the VCA, allowing for a voltage controlled gain amount and goes from heavy to extreme, especially when the x100 gain switch is engaged or the various self-modulation/feedback paths are utilized. The circuit is loosely based on a headphone amplifier circuit cranked into instability and self-oscillation.

Each Audio and CV input is normalized to a different feedback path, allowing for wild, self-oscillating distortions and extensive tone control with no external CV applied, or full control from external sources.
Read more
 1 in stock $271.54
Click for better price!
quote 742229
Cat: 742228 Rel: 05 Sep 19 • View all Synth modules
 
Low pass filter, VCA & distortion with brass touchpoints - 14HP
Notes: The 100 Grit is a touch-controlled distortion unit inspired by the output section of a vintage synthesizer. Sonically it can range from subtle tone shaping to complete sonic obliteration depending on the positions of the knobs and output chosen
.
The 100 Grit consists of a low pass filter, VCA, and distortion section with 8 touch points, voltage control overdrive, resonance, and frequency, along with a plethora of feedback paths allowing it to operate as a hands-on performance instrument with or without any input.

The touchpoints enable touch-controlled resistive patching between the cv points (gain, frequency, and resonance), sensitive points in the distortion circuit, and different distortion outputs for a mix of touch-controlled audio rate modulation and crackle box-like noise freakouts.

The low pass filter is a 24dB self-oscillating transistor ladder type with a jumper selectable resonance compensation scheme allowing more bass and volume at higher resonance settings.

The VCA is an OTA based circuit, which when pushed past 75% will impart a soft distortion characteristic, turning a triangle wave into a sine before being finally driven into a square wave close to max. If the levels are kept lower it is a reasonably clean vintage-style output section.

The distortion circuit is driven by the VCA, allowing for a voltage controlled gain amount and goes from heavy to extreme, especially when the x100 gain switch is engaged or the various self-modulation/feedback paths are utilized. The circuit is loosely based on a headphone amplifier circuit cranked into instability and self-oscillation.

Each Audio and CV input is normalized to a different feedback path, allowing for wild, self-oscillating distortions and extensive tone control with no external CV applied, or full control from external sources.
Read more
 1 in stock $265.31
Click for better price!
quote 742228
Cat: 746914 Rel: 11 Sep 19 • View all Handheld recorders
 
Four-track audio recording for music, film, podcasting & beyond
Notes: The H4n Pro isn't just improved, it's superior in every way. With advanced X/Y microphones, incredibly natural-sounding preamps, and a super-low noise floor, you can record everything from the Indy 500 to the fluttering of a hummingbird with extraordinary realism.

Welcome to the new gold standard in field recording.

The Filmmaker's Favourite:
The H4n Pro is packed with features that make it perfect for capturing audio for film. The onboard X/Y microphones deliver spectacular stereo imaging, and two combo input jacks allow you to use your favourite microphones as well. It also includes a headphone/line out jack to easily send high-definition stereo directly to your camera.

Unmatched In Concert:
The Pro is perfect for capturing live performances. Capable of handling up to 140 dB SPL, it can record everything from ear-splitting heavy metal to bass-heavy EDM. Take a line-level stereo feed from your mixing console and capture room ambience with the X/Y microphones to put your listeners front row centre.

Podcasters and Journalists:
The H4n Pro provides the essential combination of mic'ing versatility, portability, and superior audio necessary for impactful storytelling. With support for plug-in power, you can use a lavalier to mic up your subject for podcasts or interviews. Record time-stamped WAV files to sync with video footage in post-production, or embed superior audio directly on your video in real-time through a 1/8" stereo feed.

Mobile Studio:
With overdubbing and punch-in features, as well as studio-grade instrument effects and emulators, you can create songs from start to finish. The Pro also functions as a 2-input/2-output USB audio interface for PC or Mac. Launch your favourite recording/editing software or use the included Cubase LE to start creating.

High-Performance Mic Preamps:
The Pro features the same high performance, low-noise mic preamps as our acclaimed Zoom H5 and H6 Handy Recorders, with recording and playback at resolutions up to 24-bit/96 kHz. The improved noise floor (-120 dBu EIN) captures audio at lower volumes with less noise and fewer artefacts.

Built-in Stereo Recording:
X/Y stereo recording covers a wide area while capturing sound sources in the centre with clarity and definition. The angle of its two unidirectional condenser mics can easily be changed from 90 degrees for a tightly focused stereo image to 120 degrees for a wider image simply by twisting the mic capsules.

The H4n Pro provides an onboard MS decoder for Mid-Side recording with external microphones. This allows you to adjust the width of the stereo image, making it especially useful for sound design and broadcasting.

Inputs:
The two locking combo connectors accept either XLR or 1/4" balanced/unbalanced phone cables, handling mic- and line-level signals as well as instrument-level signals. Phantom Power of +24 or +48 volts can be applied to both inputs. Plus, there's a stereo 1/8" Mic jack for external audio sources, including lavalier microphones requiring 2.5 volts of plug-in power.

Outputs:
A stereo 1/8" Line/Phone Out, with dedicated volume control, allows for headphone monitoring or connection to your DSLR, while the built-in monophonic speaker allows for quick playback reference. In addition, a USB port enables fast file transfer, firmware updates, and use as a 2-in/2-out audio interface for computers.

Form Factor:
A new rubberized, ergonomic body is perfect for use in the field or with a camera, while new locking XLR/TRS connectors ensure your mic cables stay secure. Highly portable, the H4n Pro can travel anywhere for convenient mobile recording.

What's included with the H4n Pro:

- H4n Pro Handy Recorder
- Protective case
- 2 x AA batteries
- Operation manual
- Download license for Steinberg Cubase LE and WaveLab LE software
Read more
 2 in stock $247.61
Click for better price!
quote 746914
Cat: 742231 Rel: 21 Aug 19 • View all Synth modules
 
Versatile band-pass filter - 12HP
Notes: TRSHMSTR is a collaborative effort between WMD and electro-dance heavyweights MSTRKRFT. TRSHMSTR features an aggressive combination of band-pass filtering (FLTR) and distortion (DRV). The FLTR and DRV sections can be used independently or together to produce a wide variety of tone-shaping, from subtle distress to full-on acid destruction. The INs and OUTs of the FLTR and DRV sections are cross-normalled, so you can run your signal through FLTR and into DRV or vice-versa with no extra patching.
Read more
 1 in stock $233.05
Click for better price!
quote 742231
Cat: 737960 Rel: 21 Aug 19 • View all Synth modules
 
All-analogue dual stereo crossfader - 6HP
Notes: Stereo patching is becoming more common each day in the Eurorack Modular Synth System and we here at the shop are performing out a ton. Over the past couple years we consistently felt the need for a simple crossfader module that would allow users to switch between two stereo sources, add a stereo effect path, or easily mix a mono source with a stereo one. AXYS was born from this need.

Each crossfader features stereo inputs with normalling for mono to stereo uses as well as independent CV control. Control both crossfaders with one CV easily and decide how the Y will react to X's CV.

Easily transition between two performers similar to a DJ transitioning between decks with one channel and add some master buss effects with the other. Use one channel for adding stereo effects and the other to dial up some nice parallel compression. Perfect for live performance and momentary effect blasts. A simple easy to use module with tons of uses.

All analogue signal path keeps your tone intact and sounding the way you intended it to.
Read more
 3 in stock $233.05
Click for better price!
quote 737960
Cat: 736453 Rel: 21 Aug 19 • View all Studio monitors
 
Single 2-Way active studio monitor with wave guide
Notes: Updated version of the hugely popular E8. Reshaped waveguide gives a broader sweet spot, while new bass drivers extend the bottom end. The originals were already great value - these are even better.

Supplier notes:
With their smooth, accurate frequency response; powerful amplification with tons of headroom; and acoustic tuning functions that ensure you always get the best sound... it's no wonder that the original Eris-series studio monitors have been a runaway hit since their introduction. The Eris E8 XT is a substantial update to a lauded classic. Deeper lows and a wider, more controlled sweet spot (thanks to its new EBM wave guide design) mean that our best-selling studio monitors just got even better.

Studio speaker with a wide sweet spot:

We outfitted the Eris XT studio monitors with a new EBM (Elliptical Boundary Modelled) wave guide designed by none other than Hugh Sarvis of WorxAudio, the mind behind our award-winning CDL loudspeakers and lauded R-Series monitors. The result? A superior high-frequency response and wider 100-degree horizontal dispersion to create a broader sweet spot. It's ideal for group listening and collaboration - while narrow vertical dispersion reduces reflections from your desk. Silk-dome tweeters ensure snappy, accurate transient reproduction.

Lows that go lower:

The familiar woven composite low-frequency driver still offers Eris' signature tight, clear bass; plenty of punch and no flub. Eris E8 XT studio monitors sport a ported enclosure that is larger than that of their predecessors, allowing them to reach down to an astonishing 35 Hz. That's 10 Hz below previous models - with no subwoofer required!

Set up your studio monitors for your room:

We know modern recording studios can be anywhere from a spare bedroom to a multi-million dollar facility; that's why every studio monitor we make is equipped with controls that ensure the flattest response in your mix environment. Acoustic tuning controls allow you to configure the Eris E8 XT perfectly for your room - you get Low-cut, Mid, and High controls, as well as 3-way acoustic space tuning that allows you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner.

Studio monitor connections:

It's easy to feed audio to your Eris E8 XT studio monitors from an audio interface, mixer, monitor controller, or almost any other line-level source. Eris E8 XT monitors provide balanced XLR, balanced 1/4" TRS, and unbalanced RCA line-level inputs. You'll have no problem hooking your Eris speakers up to virtually anything.

Accuracy defined:

Suitable for both home recording studios and professional mix engineering, the Eris XT studio monitors combine sterling audio quality with the flexible tuning and connectivity you've come to expect from PreSonus. It's Eris, remastered.
Read more
 2 in stock $229.93
Click for better price!
quote 736453
Cat: 744064 Rel: 12 Sep 19 • View all Synth modules
 
Digital wavetable oscillator - 16HP
Notes: Klang Stadt is the latest FC iteration of Electric Druid's VCDO digital wavetable oscillator. It features a number of advantages over the previous Waverider design:

- Improved PWM filtering
- Addition of Sub Two output
- Addition of Klang output
- Addition of Xmod feature
- Onboard LFO for riding the waves
Read more
 2 in stock $220.56
Click for better price!
quote 744064
Cat: 744610 Rel: 06 Sep 19 • View all Synth modules
 
Eurorack receiver for the Wave sensor that allows Wave to connect to modular synthesisers - 4HP
Notes: The Wavefront module is the Eurorack receiver for Wave that allows Wave to connect to modular synthesizers. With Wavefront you can completely bypass the computer and bring unprecedented sound control, effect shaping and manipulation to modular setups.

Use subtle gestures to add vibrato to your favourite lead synth module, or use more visible gestures while performing.

The buttons are great for triggering sequences while the tap lets you interact with percussive modules in a completely new way. Drumming on a table has never been as fun!

To use Wavefront you need one Wave (ring) per module.
Read more
 1 in stock $187.26
Click for better price!
quote 744610
Cat: 744063 Rel: 12 Sep 19 • View all Synth modules
 
CEM3340 based VCO - 10HP
Notes: CEMosc is here, a stable AS3340 based VCO which tracks beautifully, and is feature rich. Easy to build and calibrate too.

CEMosc features:

- Onboard voltage regulation for tuning and tracking stability
- A rotary octave switch as well as a fine tune knob
- Both manual PW as well as PWM are available
- Linear and Exponential FM inputs, each with attenuators
- Both soft and hard sync
- Sawtooth, Triangle and Pulse outputs
Read more
 1 in stock $185.18
Click for better price!
quote 744063
Cat: 744597 Rel: 27 Aug 19 • View all Synth modules
 
6HP power supply for guitar pedals, plus two small signal splitters
Notes: Stoker Elektrek is equipped with a 2.1 mm hollow connector to supply power to effect pedals. A short adapter cable is included. The module itself draws power from the modular PSU. A look at the other technical data reveals that Stoker Elektrek is compatible with many effect pedals:

- 9V DC power supply
- Up to 750 mA
- Polarity: peak = negative / ring = positive

On top of that, Stoker Elektrek offers two mini multiples, each with one signal input and two outputs, which can also be used as a large splitter.
Read more
 1 in stock $183.10
Click for better price!
quote 744597
Cat: 739070 Rel: 12 Sep 19 • View all Record bags
 
High quality record bag holds 100 x 7" records with extra pockets
Notes: We created the Tucker & Bloom Sidekick 45 Bag for the working DJ. This functional, long-lasting bag houses everything you need without any of the clutter. The 45 Bag is the sized-down little brother of our popular DJ Rich Medina 45 Bag. Waterproof Ballistic Nylon withstands the bumps and scrapes along the way, and a vegetable-tanned leather carrying handle and ergonomic shearling shoulder strap make transport through an airport or to the club a cinch.

A velveteen-lined interior holds up to 100 seven-inch records, which are secured with our Takeout Top velcro flaps and nickel-cast brass hardware. Two side pockets hold spare needles and headphones, and a back slip pocket is the perfect size for a notebook. The front pocket was designed to hold cables, a recording device, or whatever else is jiggling around in your jeans. Slide business cards or adapters into an easy-to-access top pocket. Just like all Tucker & Bloom products, the 45 Bag includes our lifetime warranty. Bring all the essentials with you for your set and leave the rest at home with the Tucker & Bloom Sidekick 45 Bag.
Read more
 2 in stock $176.86
Click for better price!
quote 739070
Polyend Anywhere Powerbank Module (power supply module)
Cat: 732313 Rel: 11 Sep 19 • View all Synth modules
 
Portable power source interface for Eurorack
Notes: Release your mind and release your modular system, with the Polyend Anywhere power compatibility Eurorack module. The Polyend Anywhere hooks up to any Power Bank battery to allow the user the liberty of portability with their modular system. Take your system for a walk! Smell the flowers, and use the inspiration to create the simultaneous feedback/AM/FM patch you've been dreaming of!
Read more
 5 in stock $172.70
Click for better price!
quote 732313
Cat: 745782 Rel: 09 Sep 19 • View all Synth modules
 
Controller unit for the A-155 sequencer
Notes: Module A-154 is a supplement to the A-155 Analog/Trigger Sequencer module. It offers a lot of new features that are not available in the basic control unit of the A-155. The A-154 is used to replace the control unit of one or two A-155, i.e. the section marked "Control" with Start / Stop / Step / Reset buttons and inputs in the upper left corner of the A-155 front panel. If the A-154 is used to control the A-155 the control section of the A-155 is put out of action.

These are the features of the A-154:

Several running modes: forward, backward, pendulum, random, CV controlled step addressing. All modes are available as loop or one-shot.

LED display of the 5 different current modes and one LED for loop/one-shot display

Manual and voltage controlled selection (with attenuator) of the running mode. If no external control voltage is applied one of the 10 modes (5 modes x 2 loop/one-shot) is simply selected with a rotary knob. The CV input with attenuator is used to modulate the running mode with an external control voltage (digital high/low CV to switch between two modes or continuous analogue CV to sweep through different modes). With the combination of manual control and CV with attenuator it is possible e.g. to use only two neighbouring modes (e.g. forward/backward) or sweep through all possible running modes

Manual and voltage controlled selection (with attenuator) of first and last step of the sequence. The range is step 1...8 in 8 step mode resp. 1...16 in 16 step mode

If the running mode "CV Controlled Step Address" is selected the First Step section is used to determine the active sequencer step. Consequently manual and voltage controlled selection (with attenuator) of the active step is possible: the active step can be set by hand with the first step manual control and then modulated by an external control voltage (e.g. LFO, Random, S&H, Theremin, Light CV source, Joy Stick) at the first step CV input (with attenuator).

An internal voltage controlled clock generator with manual and CV control (with attenuator) is available. The output of the clock generator is displayed with a LED and is used as sequencer clock provided that no external clock signal is connected to the Clock In socket (normalled socket). If the CV input of the Clock section is connected to one of the analogue outputs of the sequencer the time for each step can be set separately. Even jumps (or skipping) will be possible as we will introduce the feature that a very short clock pulse will be generated if the control voltage exceeds a certain value. For example the gate row of the A-155 can be used to obtain skipping of steps: the gate output simply has to be connected to the CV input of the A-154 clock generator. If the corresponding switch of the A-155 is set correspondingly in the gate row the step will be skipped.

Manual and voltage controlled (with attenuator) pulse width (PW) of the clock signal. This features can be used to obtain a different gate length for each step: e.g. one of the CV outputs of the A-155 can be used to control the PW. With a PW control voltage coming from a LFO/random/S&H the gate length will change automatically. CV coming from Theremin A-178, ribbon controller A-198, light controlled CV A-179, joy stick A-174 are other ways to control the gate length.

8/16 step mode: A toggle switch us used to select 8 or 16 steps. The "16 step" mode requires two A-155 and one or more voltage controlled switches (e.g. A-150-1 or A-150-8). The voltage controlled switches are controlled by the "A3" output of the A-154. This output remains "low" as long as the active step is in the range 1...8 and turns to "high" in the range 9...16. The voltage controlled switches are used to switch between the CV/trigger/gates outputs of the first A-155 (step 1...8) and the second A-155 (step 9...16). In the A-154 user's manual the corresponding patch is shown.

If two A-155 are used they can work in parallel (8 steps) or serial (16 steps). The 8/16 steps switch determines if the 8 step mode (one A-155 or two A-155 in parallel) or the 16 step mode (two A-155 serial) is chosen. Both modes work with CV controlled step addressing too (see below). In 8 step mode only the steps 1...8 are addressed, in 16 step mode the steps 1...16. For serial operation an additional VC switch (A-150) is required - as mentioned above.
Read more
 1 in stock $170.63
Click for better price!
quote 745782
Cat: 739891 Rel: 30 Aug 19 • View all Synth modules
 
Intuitive pitch CV sequencer in 4HP
Notes: Ultra-simple 16-step Eurorack CV sequencer with randomisation option and storage for up to 16 patterns. Straight to the point business, all in just 4HP of rack space.

Supplier notes:
Small, easy-to-program sequencers are a bit of a rarity. Vox Digitalis is our answer to this issue. With intuitive displays and simple controls, VD is perfect for all your pitch CV needs. Set your sequence length, dial in each note, randomize, save and load 16 sequences -- VD does all the stuff the big sequencers do, just in 4HP.
Read more
 1 in stock $169.58
Click for better price!
quote 739891
Cat: 739069 Rel: 12 Sep 19 • View all Record bags
 
High quality record bag holds 100 x 7" records with extra pockets
Notes: We created the Tucker & Bloom Sidekick 45 Bag for the working DJ. This functional, long-lasting bag houses everything you need without any of the clutter. The 45 Bag is the sized-down little brother of our popular DJ Rich Medina 45 Bag. Waterproof Ballistic Nylon withstands the bumps and scrapes along the way, and a vegetable-tanned leather carrying handle and ergonomic shearling shoulder strap make transport through an airport or to the club a cinch.

A velveteen-lined interior holds up to 100 seven-inch records, which are secured with our Takeout Top velcro flaps and nickel-cast brass hardware. Two side pockets hold spare needles and headphones, and a back slip pocket is the perfect size for a notebook. The front pocket was designed to hold cables, a recording device, or whatever else is jiggling around in your jeans. Slide business cards or adapters into an easy-to-access top pocket. Just like all Tucker & Bloom products, the 45 Bag includes our lifetime warranty. Bring all the essentials with you for your set and leave the rest at home with the Tucker & Bloom Sidekick 45 Bag.
Read more
 2 in stock $164.38
Click for better price!
quote 739069
Cat: 745783 Rel: 09 Sep 19 • View all Synth modules
 
Controller unit for the A-155 sequencer
Notes: Module A-154 is a supplement to the A-155 Analog/Trigger Sequencer module. It offers a lot of new features that are not available in the basic control unit of the A-155. The A-154 is used to replace the control unit of one or two A-155, i.e. the section marked "Control" with Start / Stop / Step / Reset buttons and inputs in the upper left corner of the A-155 front panel. If the A-154 is used to control the A-155 the control section of the A-155 is put out of action.

These are the features of the A-154:

Several running modes: forward, backward, pendulum, random, CV controlled step adressing. All modes are available as loop or one-shot.

LED display of the 5 different current modes and one LED for loop/one-shot display

Manual and voltage controlled selection (with attenuator) of the running mode. If no external control voltage is applied one of the 10 modes (5 modes x 2 loop/one-shot) is simply selected with a rotary knob. The CV input with attenuator is used to modulate the running mode with an external control voltage (digital high/low CV to switch between two modes or continuous analog CV to sweep through different modes). With the combination of manual control and CV with attenuator it is possible e.g. to use only two neighbouring modes (e.g. forward/backward) or sweep through all possible running modes

Manual and voltage controlled selection (with attenuator) of first and last step of the sequence. The range is step 1...8 in 8 step mode resp. 1...16 in 16 step mode

If the running mode "CV Controlled Step Address" is selected the First Step section is used to determine the active sequencer step. Consequently manual and voltage controlled selection (with attenuator) of the active step is possible: the active step can be set by hand with the first step manual control and then modulated by an external control voltage (e.g. LFO, Random, S&H, Theremin, Light CV source, Joy Stick) at the first step CV input (with attenuator).

An internal voltage controlled clock generator with manual and CV control (with attenuator) is available. The output of the clock generator is displayed with a LED and is used as sequencer clock provided that no external clock signal is connected to the Clock In socket (normalled socket). If the CV input of the Clock section is connected to one of the analog outputs of the sequencer the time for each step can be set separately. Even jumps (or skipping) will be possible as we will introduce the feature that a very short clock pulse will be generated if the control voltage exceeds a certain value. For example the gate row of the A-155 can be used to obtain skipping of steps: the gate output simply has to be conneted to the CV input of the A-154 clock generator. If the corresponding switch of the A-155 is set correspondingly in the gate row the step will be skipped.

Manual and voltage controlled (with attenuator) pulse width (PW) of the clock signal. This features can be used to obtain a different gate length for each step: e.g. one of the CV outputs of the A-155 can be used to control the PW. With a PW control voltage coming from a LFO/random/S&H the gate length will change automatically. CV coming from Theremin A-178, ribbon controller A-198, light controlled CV A-179, joy stick A-174 are other ways to control the gate length.

8/16 step mode: A toggle switch us used to select 8 or 16 steps. The "16 step" mode requires two A-155 and one or more voltage controlled switches (e.g. A-150-1 or A-150-8). The voltage controlled switches are controlled by the "A3" output of the A-154. This output remains "low" as long as the active step is in the range 1...8 and turns to "high" in the range 9...16. The voltage controlled switches are used to switch between the CV/trigger/gates outputs of the first A-155 (step 1...8) and the second A-155 (step 9...16). In the A-154 user's manual the corresponding patch is shown.

If two A-155 are used they can work in parallel (8 steps) or serial (16 steps). The 8/16 steps switch determines if the 8 step mode (one A-155 or two A-155 in parallel) or the 16 step mode (two A-155 serial) is chosen. Both modes work with CV controlled step addressing too (see below). In 8 step mode only the steps 1...8 are addressed, in 16 step mode the steps 1...16. For serial operation an additional VC switch (A-150) is required - as mentioned above.

The functions of the Start/Stop/Step/Reset buttons and inputs are the same as for the "old" control unit of the A-155:

A high level at the Start input or operating the Start button starts the sequence from the momentarily addressed step. Not working in "CV controlled step address" mode.

A high level at the Stop input or operating the Stop button stops the sequence (the last active step remains addressed). Not working in "CV controlled step address" mode.
Read more
 1 in stock $157.09
Cat: 746891 Rel: 12 Sep 19 • View all Studio headphones
 
Professional, studio-quality headphones with wide frequency response
Notes: The RH-50 high-performance headphones are further evidence of Rane's unwavering dedication to both engineering excellence and ease of use. Recognizing that too many headphones designed for serious listening fall short of combining all the elements of great headphones into a single unit-full-range frequency response, ear pads that deliver hours of comfort, space-saving collapsible design and detachable cables with multiple jacks for use with virtually any gear-the RH-50 brings all these critical attributes together in one no-compromise unit. The result is a superb-sounding, comfortable, convenient unit that professionals and enthusiasts alike will depend on and enjoy, no matter how demanding the requirement.

The drivers are heavy-duty 40mm neodymium-powered units, which gives the RH-50 a particularly deep and potent bass response. When combined with their high-temperature/high-power voice coils, the overall effect is one of effortless authority, where every musical nuance is reproduced with detail and accuracy. The headphones are a collapsible design, making them easy to transport and the soft padded head band and ear pads stay comfortable during extended sessions.

In the box:

- RH-50 Headphones
- 39.4" (1m) straight detachable, locking 2.5mm (headphone end) to 3.5mm cable
- 55" (1.4m) coiled detachable, locking 2.5mm (headphone end) to 3.5mm cable
- 3.5mm to 1/4" TRS adapter
Read more
 2 in stock $155.02
Click for better price!
quote 746891
Blood On The Tracks (Ultradisc One Step Pressing) (limited hand-numbered 2xLP box set + insert)
Cat: UD 1S2006. Rel: 29 Aug 19
Rock
  1. Tangled Up In Blue (5:30)
  2. Simple Twist Of Fate (4:17)
  3. You're A Big Girl Now (4:29)
  4. Idiot Wind (7:49)
  5. You're Gonna Make Me Lonesome When You Go (2:55)
  6. Meet Me In The Morning (4:15)
  7. Lily, Rosemary & The Jack Of Hearts (8:50)
  8. If You See Her, Say Hello (4:46)
  9. Shelter From The Storm (4:58)
  10. Buckets Of Rain (3:23)
 in stock $151.89
Cat: 743796 Rel: 12 Sep 19 • View all MIDI keyboards
 
37 key universal keyboard controller
Notes: iRig Keys 2 gives you more ways to connect & control all of your gear, in any situation. With improved compatibility for the latest mobile devices, full MIDI input and output, multiple power options, a stocked software bundle and a stylish new look, this new and improved controller is ready to play when you are.

iRig Keys 2 is a 37-key (3 octave) USB/MIDI keyboard controller with velocity-sensitive keys that connects to all of your devices: iPhone, iPad, Android and Mac/PC as well as any other MIDI compatible device. Packed into an ultra-compact size, it's the perfect way to unleash your creativity on the go.

Control more:
iRig Keys 2 adds MIDI input and output so you can control stand-alone gear like UNO Synth and other analogue synthesizers, UNO Drum and other drum machines, and more. When connected to a computer or mobile device, it acts as a MIDI interface for all your gear, streamlining your rig into one compact unit.

You can run iRig Keys 2 off your computer or mobile device, USB power supply or even USB battery packs, so it's perfect for on-the-go rigs.

Be heard:
Never worry about compatibility issues again. iRig Keys 2 works right out of the box with iPhone, iPad and Mac/PC, plus it's compatible with most Android devices*, even the latest models. A new headphone output lets you connect speakers or headphones, so you're never stuck using your device's built-in speakers.

Whether you want to practice silently or blast through a sound system, iRig Keys 2 has you covered.

Limitless potential:
Best of all, iRig Keys 2 works with hundreds of popular music apps for iPhone, iPad, Android and Mac/PC.

Whether you want to learn to play, practice your chops, compose a song or perform live, and more, there's a never-ending stream of apps waiting to fuel your inspiration.

Convenient control:
iRig Keys 2 hosts a number of useful controls - from modulation and pitch bend wheels, a volume output control, octave up/down buttons, program up/down buttons, a set button, an ALT button, and a data push encoder.

Where to next:
iRig Keys 2 is designed for portability, so it can travel anywhere you do. It's smaller than other 37-key keyboards on the market, and runs off your device, a USB wall charger or USB battery pack, meaning there's no bounds to your creativity. Head outside, get inspired in your hotel room, practice in the classroom - no matter where your musical journey takes you, iRig Keys 2 will be along for the ride.

Cutting-edge software bundle:
iRig Keys 2 includes IK's award-winning Mac/PC sound & groove workstation, SampleTank 4 SE, giving you over 2000 sounds to create cutting-edge tracks right out of the box.

It also unlocks free apps like SampleTank FREE for iPhone iPad, iGrand Piano FREE for iPhone, iPad and Android, and iLectric Piano FREE for Android.
Read more
 More than 10 in stock $144.61
Click for better price!
quote 743796
Notes: The A-100LC1v is a smaller version of the A-100LC3 with 48 HP of space. It is made out of raw wood, a black coating gives the Eurorack frame a vintage look. The built-in power supply, type A-100SSB, delivers up to 380 mA at +12 V and -12 V as well as 100 mA at +5 V.

The A-100LC1v comes equipped with one 48 HP measuring row for 3U modules. Its power supply features eight connectors for oscillators, filters and so forth. The case is connected to the grid via an IEC power socket.
Read more
 1 in stock $138.37
Click for better price!
quote 743113
Cat: 745781 Rel: 09 Sep 19 • View all Synth modules
 
Complex switch/multiplexer unit - 16HP
Notes: Module A152 is a very useful switching and T&H module. It combines a voltage addressed 1-to-8 multiplexer and 8 fold T&H that can be used as kind of an analogue shift register too. The active in/output is displayed by a LED. The digital output of the currently addressed step outputs "high". The remaining digital outputs are low.

Instead of voltage control even clock/reset controlled addressing of the active step is possible. The rising edge of each clock signal causes an advance to the next state. The rising edge of the reset signal resets to step 1.

The sum of the voltages coming from the manual Address control and the CV input define the currently addressed step of the 3 sub-devices. If the module is controlled by clock and reset the control voltage has to remain unchanged as the CV control has priority over the clock/reset control (e.g. simply turn the CV control fully counter-clockwise and do not touch the Address control knob).

Sub-device #1 is the bidirectional 8-fold multiplexer (kind of an electronical 8-fold rotary switch). Bidirectional means that it works into both directions like a mechanical rotary switch: the common socket may work as an output that is connected to one of the 8 inputs that are e.g. connected to modulation or audio sources. But the common socket may even function as input. In this case the signal applied to the common socket is output to the currently addressed single socket. The voltage range of the in/outputs to be switched is the full A-100 voltage range -12V....+12V. All A-100 signals can be switched without any restrictions.

Sub-device #2 is the addressed 8-fold T&H. The signal at the common T&H input is connected to the addressed T&H output. As soon as a new output is addressed the last voltage is stored at the output (Track&Hold function). The T&H section of the A-152 allows the emulation of the "toggling T&H" function of the Buchla module 266 "Source of Uncertainty". Only the first two T&H outputs of the A-152 are required for this application. This unit can be used also as kind of an analogue (shift) register. The difference to a "real" analogue shift register is that the sampled output voltages are not shifted to the next output but remain allocated to the same output. But in some cases (e.g. controlling the pitch of 3 VCOs by 3 output voltages of the A-152) the result is the same.

Sub-device #3 is the digital output section. The digital output of the currently addressed turns to "high". All other digital outputs are low. The digital outputs can be used to trigger e.g. envelope generators or to control the reset input in the clocked mode to reduce the number of addressed stages.
Read more
 1 in stock $136.29
Click for better price!
quote 745781
Cat: 743797 Rel: 12 Sep 19 • View all MIDI keyboards
 
37 mini-key universal keyboard controller
Notes: iRig Keys 2 gives you more ways to connect & control all of your gear, in any situation. With improved compatibility for the latest mobile devices, full MIDI input and output, multiple power options, a stocked software bundle and a stylish new look, this new and improved controller is ready to play when you are.

iRig Keys 2 is a 37-key (3 octave) USB/MIDI keyboard controller with velocity-sensitive keys that connects to all of your devices: iPhone, iPad, Android and Mac/PC as well as any other MIDI compatible device. Packed into an ultra-compact size, it's the perfect way to unleash your creativity on the go.

Control more:
iRig Keys 2 adds MIDI input and output so you can control stand-alone gear like UNO Synth and other analogue synthesizers, UNO Drum and other drum machines, and more. When connected to a computer or mobile device, it acts as a MIDI interface for all your gear, streamlining your rig into one compact unit.

You can run iRig Keys 2 off your computer or mobile device, USB power supply or even USB battery packs, so it's perfect for on-the-go rigs.

Be heard:
Never worry about compatibility issues again. iRig Keys 2 works right out of the box with iPhone, iPad and Mac/PC, plus it's compatible with most Android devices*, even the latest models. A new headphone output lets you connect speakers or headphones, so you're never stuck using your device's built-in speakers.

Whether you want to practice silently or blast through a sound system, iRig Keys 2 has you covered.

Limitless potential:
Best of all, iRig Keys 2 works with hundreds of popular music apps for iPhone, iPad, Android and Mac/PC.

Whether you want to learn to play, practice your chops, compose a song or perform live, and more, there's a never-ending stream of apps waiting to fuel your inspiration.

Convenient control:
iRig Keys 2 hosts a number of useful controls - from modulation and pitch bend wheels, a volume output control, octave up/down buttons, program up/down buttons, a set button, an ALT button, and a data push encoder.

Where to next:
iRig Keys 2 is designed for portability, so it can travel anywhere you do. It's smaller than other 37-key keyboards on the market, and runs off your device, a USB wall charger or USB battery pack, meaning there's no bounds to your creativity. Head outside, get inspired in your hotel room, practice in the classroom - no matter where your musical journey takes you, iRig Keys 2 will be along for the ride.

Cutting-edge software bundle:
iRig Keys 2 includes IK's award-winning Mac/PC sound & groove workstation, SampleTank 4 SE, giving you over 2000 sounds to create cutting-edge tracks right out of the box.

It also unlocks free apps like SampleTank FREE for iPhone iPad, iGrand Piano FREE for iPhone, iPad and Android, and iLectric Piano FREE for Android.
Read more
 More than 10 in stock $129.00
Click for better price!
quote 743797
Cat: 745109 Rel: 06 Sep 19 • View all Synth modules
 
Compact yet flexible mix module - 6HP
Notes: Even with small patches with only a few modules, you usually have to combine individual signals into a single sum: You need one mixer, maybe two, and preferably as small as possible.

With Sum 42, Vermona present a compact yet versatile Eurorack mixer. You can use it as two 4-in-1 or one 8-in-1 mixers. It can process both audio signals and control voltages.

Sum 42 is an indispensable tool with a perfect size/benefit ratio.
Read more
 1 in stock $126.92
Click for better price!
quote 745109
Cat: 736452 Rel: 21 Aug 19 • View all Studio monitors
 
Single 2-way active studio monitor with wave guide
Notes: With their smooth, accurate frequency response; powerful amplification with tons of headroom; and acoustic tuning functions that ensure you always get the best sound... it's no wonder that the original Eris-series studio monitors have been a runaway hit since their introduction. The Eris E5 XT is a substantial update to a lauded classic. Deeper lows and a wider, more controlled sweet spot (thanks to its new EBM wave guide design) mean that our best-selling studio monitors just got even better.

Studio speakers with a wide sweet spot:

We outfitted the Eris XT studio monitors with a new EBM (Elliptical Boundary Modelled) wave guide designed by none other than Hugh Sarvis of WorxAudio, the mind behind our award-winning CDL loudspeakers and lauded R-Series monitors. The result? A superior high-frequency response and wider 100-degree horizontal dispersion to create a broader sweet spot. It's ideal for group listening and collaboration - while narrow vertical dispersion reduces reflections from your desk. Silk-dome tweeters ensure snappy, accurate transient reproduction.

Lows that go lower:

The familiar woven composite low-frequency driver still offers Eris' signature tight, clear bass; plenty of punch and no flub. Eris E5 XT studio monitors sport a ported enclosure that is larger than that of their predecessors, allowing them to reach down to an astonishing 48 Hz. That's 10 Hz below previous models - with no subwoofer required!

Set up your studio monitors for your room:

We know modern recording studios can be anywhere from a spare bedroom to a multi-million dollar facility; that's why every studio monitor we make is equipped with controls that ensure the flattest response in your mix environment. Acoustic tuning controls allow you to configure the Eris E5 XT perfectly for your room - you get Low-cut, Mid, and High controls, as well as 3-way acoustic space tuning that allows you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner.

Studio monitor connections:

It's easy to feed audio to your Eris E5 XT studio monitors from an audio interface, mixer, monitor controller, or almost any other line-level source. Eris E5 XT monitors provide balanced XLR, balanced 1/4" TRS, and unbalanced RCA line-level inputs. You'll have no problem hooking your Eris speakers up to virtually anything.

Accuracy defined:

Suitable for both home recording studios and professional mix engineering, the Eris XT studio monitors combine sterling audio quality with the flexible tuning and connectivity you've come to expect from PreSonus. It's Eris, remastered.
Read more
 2 in stock $123.81
Click for better price!
quote 736452
Cat: 577757 Rel: 10 Sep 19 • View all Synth modules
 
Dual quantizer for CV's, converting a continuous positive input voltage into a stepped output voltage - 8HP
Notes: Module A-156 is a Dual Control Voltage Quantizer. A quantizer converts a continuous control voltage in the range 0...+10V into a stepped output voltage in the same voltage range (i.e. only certain voltages occur). Normally 1/12 V steps are used to obtain semitone steps. Quantizer 2 of the A-156 allows has more sophisticated quantizing modes like major scale (i.e. only voltages corresponding to the major scale), minor scale, major chord, minor chord, fundamental + fifth and addition of seventh or sixth when chords are selected. Only those voltages appear at the CV output which comply with the selection rule (e.g. minor chord with seventh). The mode setting of quantizer 2 is done with 3 switches (1-0-1 type with middle position). From the factory quantizer 1 is working in the semitone mode. But there is a jumper on the pc board that can be changed so that even quantizer 1 uses the same scale as quantizer 2.

For each quantizer the following in/outputs are available:

- Control voltage input (CV In): The input for the continuous voltage to be quantized
- Control voltage output (CV Out): The output of the quantized voltage
- Trigger input (Trig.In): If this jack is left open the quantizer is working permanently. If a rectangle voltage is applied quantisation happens only at the rising edge of the signal (e.g. from an LFO or MIDI-to-Sync interface). Thus the quantizing can be synchronized with other events
- Trigger output (Trig.Out): Whenever a quantisation happens (i.e. a new voltage is generated at the CV Out) a positive pulse occurs at this output. It may be used to trigger an envelope generator (ADSR) or for triggering other modules (sequential switch A-151, trigger divider/sequencer A-160/161, trigger delay A-162, ...). If none of these functions are used the jack is left open

On top of that the A-156 is provided with a common transpose CV input having an additive effect on both quantizers. This input is quantized in semitone steps. A typical application is the transposition of a sequence generated by the A-155 by a second control voltage (e.g. coming from the MIDI-CV interface A-190).

Typical applications:

- Quantizing the CV sequence generated by an A-155 (semitone, only major scale, only minor scale and so on)
- Quantizing the voltage coming from the Trautonium Manual / Ribbon Controller A-198, Theremin A-178 or Light-to-CV module A-179 to get accurate semitones or major/minor scale tones
- Arpeggio-like effects with LFO, random, noise, envelope generators as CV sources (for negative or symmetrical voltages an offset must be added, e.g. with the offset/attenuator module A-129-3, to obtain positive voltages for the A-156 input)
Read more
 1 in stock $123.80
Click for better price!
quote 577757
NUX
Cat: 747753 Rel: 12 Sep 19 • View all Wireless microphones
 
Wireless snap-on transmission system
Notes: The NUX B-3 is a solidly 2.4GHz wireless snap-on microphone system designed for those who want to get rid of the cables and enjoy the wireless world without any complicated set-up. Channel 1 is the default pairing channel but if you want to use different channels for any reason, just press the channel switch on both the transmitter and the receiver to make sure both units are in the same channel. RF LEDs will turn blue when paired.

In the box:

- B-3 transmitter (XLRF)
- B-3 receiver (XLRM)
- USB A to dual micro B charging lead
- Hot-shoe mount for receiver
- XLR to 3.5mm camera input lead
Read more
 1 in stock $122.76
Cat: 745118 Rel: 27 Aug 19 • View all Wireless microphones
 
Dual UHF wireless beltpack system
Notes: Dual wireless microphone system with fixed UHF receiver and 2 beltpack transmitters, supplied with a choice of neckband or lavalier microphones. The receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.

In the box:

Dual channel receiver
2 x beltpack transmitters
2 x neckband microphones
2 x lavalier microphones
4 x AA batteries
2 x UHF antennas
2 x antenna leads
2 x rack-mounting ears
Mains power adaptor
6.3mm jack to jack lead
Read more
 2 in stock $119.95
Click for better price!
quote 745118
Cat: 745120 Rel: 27 Aug 19 • View all Wireless microphones
 
Dual UHF wireless beltpack system
Notes: Dual wireless microphone system with fixed UHF receiver and 2 beltpack transmitters, supplied with a choice of neckband or lavalier microphones. The receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.

In the box:

Dual channel receiver
2 x beltpack transmitters
2 x neckband microphones
2 x lavalier microphones
4 x AA batteries
2 x UHF antennas
2 x antenna leads
2 x rack-mounting ears
Mains power adaptor
6.3mm jack to jack lead
Read more
 2 in stock $119.95
Click for better price!
quote 745120
Eras: Vinyl Collection Part IV (limited gatefold 180 gram 9xLP box (sides 4 & 12 etched) + booklet in slipcase)
Cat: 190758 68221. Rel: 20 Aug 19
Metal
  1. ZTO (1:16)
  2. By Your Command (8:13)
  3. Ziltoidia Attaxx!!! (3:42)
  4. Solar Winds (9:52)
  5. Hyperdrive (3:49)
  6. N9 (5:32)
  7. Planet Smasher (5:49)
  8. Omnidimensional Creator (0:45)
  9. Color Your World (9:58)
  10. The Greys (4:19)
  11. Tall Latte (1:00)
  12. Don't Know Why (7:32)
  13. Travelling Salesman (6:44)
  14. Z2 (4:01)
  15. From Sleep Awake (3:00)
  16. Ziltoidian Empire (6:30)
  17. War Princess (8:17)
  18. Deathray (4:55)
  19. March Of The Poozers (6:27)
  20. Wandering Eye (3:53)
  21. Earth (7:26)
  22. Ziltoid Goes Home (6:23)
  23. Through The Wormhole (3:40)
  24. Dimension Z (6:19)
  25. Z2 (live) (3:47)
  26. From Sleep Awake (live) (3:49)
  27. Ziltoidian Empire (live) (5:59)
  28. War Princess (live) (8:28)
  29. Deathray (live) (4:43)
  30. March Of The Poozers (live) (6:30)
  31. Wandering Eye (live) (3:41)
  32. Earth (live) (8:03)
  33. Ziltoid Goes Home (live) (6:52)
  34. Through The Wormhole (live) (3:43)
  35. Dimension Z (live) (8:10)
  36. Effervescent!/True North (live) (6:08)
  37. Lucky Animals (live) (3:45)
  38. Planet Of The Apes (live) (11:12)
  39. Truth (live) (4:08)
  40. War (live) (6:08)
  41. Soul Driven (live) (1:26)
  42. Planet Smasher (live) (5:51)
  43. Baby Song (live) (5:35)
  44. Vampolka (live) (1:32)
  45. Vampira (live) (4:01)
  46. Addicted! (live) (5:31)
  47. Colour Your World (live) (9:52)
  48. The Greys (live) (4:54)
  49. Hyperdrive (live) (4:44)
  50. Ih-ah! (live) (3:56)
  51. Where We Belong (live) (4:19)
  52. Detox (live) (6:08)
  53. Bend It Like Bender! (live) (3:44)
  54. Live (live) (4:40)
  55. Kingdom (live) (5:14)
  56. Juular (live) (4:06)
  57. Love? (live) (5:23)
  58. Colonial Boy (live) (2:59)
  59. Grace (live) (6:47)
  60. Little Pig (live) (7:38)
 in stock $115.48
Cat: 732855 Rel: 10 Sep 19 • View all Synth modules
 
Expanded version of the popular Yocto (808) cowbell
Notes: Latvian modular specialists Erica take on the 808 cowbell. Based on the classic sound, reinvented for Eurorack with tune and decay controls plus tuning CV and accent inputs.

Supplier notes:
Erica Synths Cowbell module is an extended, modular version of Yocto (808) cowbell. For more sonic versatility we have added Tune and Decay controls, as well as Tune CV with an attenuator for nice vibratos. The module is developed in collaboration with a French company e-licktronic.
Read more
 4 in stock $112.37
Click for better price!
quote 732855
Cat: 745785 Rel: 10 Sep 19 • View all Synth modules
 
Dual quantizer for CV's, converting a continuous positive input voltage into a stepped output voltage - 8HP
Notes: Module A-156 is a Dual Control Voltage Quantizer. A quantizer converts a continuous control voltage in the range 0...+10V into a stepped output voltage in the same voltage range (i.e. only certain voltages occur). Normally 1/12 V steps are used to obtain semitone steps. Quantizer 2 of the A-156 allows has more sophisticated quantizing modes like major scale (i.e. only voltages corresponding to the major scale), minor scale, major chord, minor chord, fundamental + fifth and addition of seventh or sixth when chords are selected. Only those voltages appear at the CV output which comply with the selection rule (e.g. minor chord with seventh). The mode setting of quantizer 2 is done with 3 switches (1-0-1 type with middle position). From the factory quantizer 1 is working in the semitone mode. But there is a jumper on the pc board that can be changed so that even quantizer 1 uses the same scale as quantizer 2.

For each quantizer the following in/outputs are available:

- Control voltage input (CV In): The input for the continuous voltage to be quantized
- Control voltage output (CV Out): The output of the quantized voltage
- Trigger input (Trig.In): If this jack is left open the quantizer is working permanently. If a rectangle voltage is applied quantisation happens only at the rising edge of the signal (e.g. from an LFO or MIDI-to-Sync interface). Thus the quantizing can be synchronized with other events
- Trigger output (Trig.Out): Whenever a quantisation happens (i.e. a new voltage is generated at the CV Out) a positive pulse occurs at this output. It may be used to trigger an envelope generator (ADSR) or for triggering other modules (sequential switch A-151, trigger divider/sequencer A-160/161, trigger delay A-162, ...). If none of these functions are used the jack is left open

On top of that the A-156 is provided with a common transpose CV input having an additive effect on both quantizers. This input is quantized in semitone steps. A typical application is the transposition of a sequence generated by the A-155 by a second control voltage (e.g. coming from the MIDI-CV interface A-190).

Typical applications:

- Quantizing the CV sequence generated by an A-155 (semitone, only major scale, only minor scale and so on)
- Quantizing the voltage coming from the Trautonium Manual / Ribbon Controller A-198, Theremin A-178 or Light-to-CV module A-179 to get accurate semitones or major/minor scale tones
- Arpeggio-like effects with LFO, random, noise, envelope generators as CV sources (for negative or symmetrical voltages an offset must be added, e.g. with the offset/attenuator module A-129-3, to obtain positive voltages for the A-156 input)
Read more
 1 in stock $112.35
400 Miles From LA 1955-56 (Deluxe Edition) (limited gatefold gold vinyl 2xLP box set + poster + booklet + journal + shot glass + coasters with obi-strip)
Cat: LITA 176BOX. Rel: 09 Sep 19
Folk/Americana
  1. Cross Country Blues (2:36)
  2. The Woman I Love (3:41)
  3. Five Thousand & One (3:01)
  4. Lonesome Day (2:54)
  5. A Lady Called Blues (3:18)
  6. Five More Miles To Folsom (2:32)
  7. Fort Worth (2:16)
  8. The Old Man & His Guitar (2:11)
  9. Peculiar Guy (2:57)
  10. Long Black Train (2:50)
  11. I Guess It's Love (2:13)
  12. It's An Actuality (2:44)
  13. Buying On Time (1:58)
  14. The Country Bus Tune (1:46)
  15. Long Black Train (4:01)
  16. Run Boy Run (2:39)
  17. Big Joe Slade (3:41)
  18. Son Of A Gun (3:02)
  19. Georgia Chain Gang (3:14)
  20. Look At That Woman (4:04)
  21. Peculiar Guy (3:05)
  22. The Railroad Song (2:15)
  23. Six Feet Of Chain (3:56)
  24. Trouble Is A Lonesome Town (2:24)
 in stock $111.31
Cat: 719655 Rel: 03 Sep 19 • View all Synth modules
 
High quality stereo digital FX for AE modular
Notes: Stereo effects processing for Tangible's affordable AE modular system. Offers a total of 15 digital effect programs with CV control over three parameters each. Can run in Eurorack via an optional adaptor frame.

Supplier notes:
The MULTIFX module offers 15 different stereo audio FX programs, a wide variety from common FX like reverb and delay to unique effects like Ring Crusher or Glitch delay. Also a nice shimmer effect is onboard.

Each program has 3 parameters that can be adjusted and additionally be CV-controlled.

With a switch the sample rate can be reduced to half the normal rate, resulting in doubling the effect times (with reverb, delay...) and introducing a nice portion of aliasing.

It is based on the FV-1 DSP chip that is well-known from other FX-modules in the Eurorack world; the MULTIFX module offers the 7 factory programs of the chip plus 8 new and unique ones created by Tangible Waves.
Read more
 2 in stock $110.27
Click for better price!
quote 719655
Items 1 to 50 of 2,482 on page 1 of 50
1  2  3  ...  50  »

Filter

Saved Searches
Save current search
Release Date
Close