100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Format: All Vinyl CD DJ Equipment Studio Equipment
View:
Options
Items 1 to 50 of 67 on page 1 of 2
1  2  »
Cat: 719655 Rel: 03 Sep 19 • View all Synth modules
 
High quality stereo digital FX for AE modular
Notes: Stereo effects processing for Tangible's affordable AE modular system. Offers a total of 15 digital effect programs with CV control over three parameters each. Can run in Eurorack via an optional adaptor frame.

Supplier notes:
The MULTIFX module offers 15 different stereo audio FX programs, a wide variety from common FX like reverb and delay to unique effects like Ring Crusher or Glitch delay. Also a nice shimmer effect is onboard.

Each program has 3 parameters that can be adjusted and additionally be CV-controlled.

With a switch the sample rate can be reduced to half the normal rate, resulting in doubling the effect times (with reverb, delay...) and introducing a nice portion of aliasing.

It is based on the FV-1 DSP chip that is well-known from other FX-modules in the Eurorack world; the MULTIFX module offers the 7 factory programs of the chip plus 8 new and unique ones created by Tangible Waves.
Read more
 2 in stock $110.46
Click for better price!
quote 719655
Cat: 719650 Rel: 03 Sep 19 • View all Synth modules
 
Analogue 16-step CV sequencer
Notes: The SEQ16 is a 16-step sequencer for controlling oscillator pitch and triggering envelopes.

Compared to "classic" analogue sequencers it works a bit different: Instead of setting the CV for each step independently (which means in fact "tuning" each step which can be a bit tedious), the SEQ16 has 5 knobs for pre-setting different CV's (= notes); each of the 16 step knobs selects one of these CVs, plus 0V (=base note) plus Pause (no trigger output). So some CVs have to be fine-tuned once; with the step knobs you can focus entirely on the sequence itself and you can even modify it on the fly, still remaining in tune.

An additional feature is "accent"; this can be set for each step by turning the knob fully clockwise. If a step is set to "accent", a separate trigger output is set and also a gate repeat for the regular gate output can be selected (from one to eight repeats).
Read more
 1 in stock $86.49
Click for better price!
quote 719650
Cat: 742228 Rel: 05 Sep 19 • View all Synth modules
 
Low pass filter, VCA & distortion with brass touchpoints - 14HP
Notes: The 100 Grit is a touch-controlled distortion unit inspired by the output section of a vintage synthesizer. Sonically it can range from subtle tone shaping to complete sonic obliteration depending on the positions of the knobs and output chosen
.
The 100 Grit consists of a low pass filter, VCA, and distortion section with 8 touch points, voltage control overdrive, resonance, and frequency, along with a plethora of feedback paths allowing it to operate as a hands-on performance instrument with or without any input.

The touchpoints enable touch-controlled resistive patching between the cv points (gain, frequency, and resonance), sensitive points in the distortion circuit, and different distortion outputs for a mix of touch-controlled audio rate modulation and crackle box-like noise freakouts.

The low pass filter is a 24dB self-oscillating transistor ladder type with a jumper selectable resonance compensation scheme allowing more bass and volume at higher resonance settings.

The VCA is an OTA based circuit, which when pushed past 75% will impart a soft distortion characteristic, turning a triangle wave into a sine before being finally driven into a square wave close to max. If the levels are kept lower it is a reasonably clean vintage-style output section.

The distortion circuit is driven by the VCA, allowing for a voltage controlled gain amount and goes from heavy to extreme, especially when the x100 gain switch is engaged or the various self-modulation/feedback paths are utilized. The circuit is loosely based on a headphone amplifier circuit cranked into instability and self-oscillation.

Each Audio and CV input is normalized to a different feedback path, allowing for wild, self-oscillating distortions and extensive tone control with no external CV applied, or full control from external sources.
Read more
 1 in stock $272.00
Click for better price!
quote 742228
Cat: 719704 Rel: 02 Sep 19 • View all Synth module accessories
 
Pack of 6 patch wires
Notes: A set of 6 yellow patchwires for AE modular; with a length of 10cm. The cable has a soft, flexible silicone insulation, with a gold plated pin.
Read more
 2 in stock $4.43
Cat: 719707 Rel: 02 Sep 19 • View all Synth module accessories
 
Pack of 6 patch wires
Notes: A set of 6 green patchwires for AE modular; with a length of 55cm. The cable has a soft, flexible silicone insulation, with a gold plated pin.
Read more
 1 in stock $7.28
Cat: 719686 Rel: 02 Sep 19 • View all Synth modules
 
Classic wavefolder for the AE system
Notes: This module is based on a design used also by Ken Stone for his CGS system; the original circuit dates back to a publication from 1973.

Basically, the WAVEFOLDER clips and folds the incoming waveform; usually, waveforms with little overtones (like triangle or sinewaves) are used as input. In general, by the clipping and folding, the signal enriches the input signal with more overtones.
Read more
 1 in stock $33.87
Cat: 742229 Rel: 05 Sep 19 • View all Synth modules
 
Low pass filter, VCA & distortion with brass touchpoints - 14HP
Notes: The 100 Grit is a touch-controlled distortion unit inspired by the output section of a vintage synthesizer. Sonically it can range from subtle tone shaping to complete sonic obliteration depending on the positions of the knobs and output chosen
.
The 100 Grit consists of a low pass filter, VCA, and distortion section with 8 touch points, voltage control overdrive, resonance, and frequency, along with a plethora of feedback paths allowing it to operate as a hands-on performance instrument with or without any input.

The touchpoints enable touch-controlled resistive patching between the cv points (gain, frequency, and resonance), sensitive points in the distortion circuit, and different distortion outputs for a mix of touch-controlled audio rate modulation and crackle box-like noise freakouts.

The low pass filter is a 24dB self-oscillating transistor ladder type with a jumper selectable resonance compensation scheme allowing more bass and volume at higher resonance settings.

The VCA is an OTA based circuit, which when pushed past 75% will impart a soft distortion characteristic, turning a triangle wave into a sine before being finally driven into a square wave close to max. If the levels are kept lower it is a reasonably clean vintage-style output section.

The distortion circuit is driven by the VCA, allowing for a voltage controlled gain amount and goes from heavy to extreme, especially when the x100 gain switch is engaged or the various self-modulation/feedback paths are utilized. The circuit is loosely based on a headphone amplifier circuit cranked into instability and self-oscillation.

Each Audio and CV input is normalized to a different feedback path, allowing for wild, self-oscillating distortions and extensive tone control with no external CV applied, or full control from external sources.
Read more
 1 in stock $272.00
Click for better price!
quote 742229
Cat: 718641 Rel: 02 Sep 19 • View all Audio & MIDI interfaces
 
High-spec 8 channel dual mode interface/ADAT expander in studio-friendly rack format
Notes: The rackmount incarnation of Arturia's audio interface range is a monster, with a total of 8 pre-amps, 16 inputs and 20 outs. A lot of recording power in a small package. Ideal for hardware setups.

Supplier notes:
The Arturia AudioFuse 8Pre is a dual-mode interface and ADAT expander which boasts 8 channels of premium analogue audio, rock-solid sync, USB-C, and optical connectivity. With our award-winning lineage of pristine analogue quality, AudioFuse 8Pre is destined to become the expander of choice in studios and creative spaces around the world.

When you're putting your heart and soul into your music and productions, you need to know your audio is in safe hands.

AudioFuse 8Pre offers unrivalled quality at its price point. The 8 Discrete Pro- preamps and analogue signal path will let you truly "hear" your audio for the first time. The super-low Equivalent Input Noise (EIN) lets you capture every subtle detail, while the huge input gain will drive even the most demanding low-output mics. All this with a totally flat frequency response for total transparency. The superb quality doesn't stop there, AudioFuse 8Pre also features the best A/D converters available.

If you're a recording professional you know that no two days are the same. You need gear that gives you the versatility you need to be prepared for the unexpected.

AudioFuse 8Pre can fulfil any studio role. You already have a powerful interface, but need more inputs? AudioFuse 8Pre is the perfect ADAT preamp expander. Want to record multiple channels, but don't own an ADAT-expandable interface? AudioFuse 8Pre can connect directly with your computer so you can record multi-tracked instruments all at once. It's a high-performance audio interface with USB connectivity, speaker outputs and independent headphone output.

Use on its own; expand your existing interface; cascade 2 AudioFuse 8Pre together via ADAT for 16 superb preamps. AudioFuse 8Pre does it all.

Sometimes it's the little things that matter most. You need your gear to complement and enhance the way you work, and that's the driving force behind AudioFuse 8Pre.

AudioFuse 8Pre is easy to use, with one-button, one-function design, and features backward-compatible USB-C connectivity for super compatibility. It's housed in a robust metal chassis, and the included rack ears can be mounted to either face forward or down, letting it stand freely or be integrated into your 19" racks depending on your setup. It also features ADAT in, so you could send your musicians cue mixes using its headphone output.

We've spent years working together with studios, producers, and musicians at all levels to minimize the "pain points" other interfaces give you on a daily basis. AudioFuse 8Pre is the result.

AudioFuse Creative Suite:

AudioFuse 8Pre comes complete with the AudioFuse Creative Suite, an ever-evolving collection of software effects and instruments that will let you add your own unique signature to your music. Combining favourites from our award-winning "You'll Actually Use" series with Analog Lab Lite, AudioFuse 8Pre lets you also enjoy legendary signal processing effects and iconic synth sounds. Colour the pristine inputs of AudioFuse 8Pre with stunning vintage effects!

Box contents:

- AudioFuse 8Pre unit
- Power supply
- USB cable
- DiscretePro Certificate
Read more
 2 in stock $655.52
Click for better price!
quote 718641
Rode RODELink Lavalier Microphone (lavalier microphone)
Cat: 742237 Rel: 06 Sep 19 • View all Lavalier microphones
 
Professional-grade lavalier mic with 3.5mm TRS locking connector
Notes: RODELink LAV is a professional-grade wearable microphone designed for use in a wide range of applications. The locking TRS connector is designed to pair perfectly with the RODELink range of wireless microphones and most recorders with a 3.5mm locking microphone input.

The RODELink LAV is perfect for anyone in need of a high-quality lavalier microphone with a rock-solid locking connector. It features a discreet 4.5mm omnidirectional microphone, which picks up sound from all directions, making it very forgiving when it comes to placement on talent.

A foam pop shield is supplied to minimise wind noise and vocal plosives (hard 'b', 't' and 'p' sounds), as well as a durable mounting clip with in-built cable management for quick and easy rigging. It also features a hard-wearing Kevlarr reinforced cable, designed to withstand the rigours of any...
Read more
 1 in stock $71.88
Click for better price!
quote 742237
Cat: 745109 Rel: 06 Sep 19 • View all Synth modules
 
Compact yet flexible mix module - 6HP
Notes: Even with small patches with only a few modules, you usually have to combine individual signals into a single sum: You need one mixer, maybe two, and preferably as small as possible.

With Sum 42, Vermona present a compact yet versatile Eurorack mixer. You can use it as two 4-in-1 or one 8-in-1 mixers. It can process both audio signals and control voltages.

Sum 42 is an indispensable tool with a perfect size/benefit ratio.
Read more
 1 in stock $127.13
Click for better price!
quote 745109
Cat: 719678 Rel: 02 Sep 19 • View all Synth modules
 
Audio mixer with 4 inputs
Notes: This module consists of an audio mixer with 4 inputs and their level knobs, plus an additional 4 separate inputs that are mixed at full level (especially for mixing CV signals), and a separate output.
Read more
 1 in stock $27.36
Cat: 719726 Rel: 02 Sep 19 • View all Synth module accessories
 
Blank module for AE modular - 4U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
Read more
 1 in stock $4.95
Cat: 719727 Rel: 03 Sep 19 • View all Synth module accessories
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 8 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
 2 in stock $26.04
Cat: 719652 Rel: 02 Sep 19 • View all Synth modules
 
4-track, 16-step trigger sequencer
Notes: TRIQ164 is a 4-track, 16-step trigger sequencer.

Four track buttons select the track to be edited; with 16 buttons each step of the track can be activated an is then displayed by an LED.

For each step in each track a "repeat" can be activated, resulting in repeated triggers within one step. The number of repeats can be selected from one to eight by the REPEAT knob. Additionally, the repeat count can be CV controlled by the REPEAT CV input.

The inputs MUTE 1/2 allow to mute the outputs 1 and 2 by an external signal (e.g. for muting a kick drum)

Each of the 16 steps has a separate trigger output for additional control for certain steps or limiting the sequence length by connecting one of the outputs to the RESET input.

Use it for any kind of rhythmical patterns, typically for triggering drum sounds or envelope generator!

No, it has no pattern load/save features; this will be part of a future, much more complex sequencer. TRIQ164 is designed as improved replacement for the STEP10.

Width: 2U
Read more
 3 in stock $52.10
Click for better price!
quote 719652
Cat: 719659 Rel: 02 Sep 19 • View all Synth modules
 
Mono delay module
Notes: This module is a standard mono delay with the usual parameters:

- Delay time
- Feedback
- Dry/wet mix

It sounds not as clean and polished as a usual digital delay but has quite a character on its own. High feedback settings allow endless and distorting loops.

(For the techies: It is based on the well-known PT2399 chip.)
Read more
 1 in stock $38.04
Cat: 719699 Rel: 03 Sep 19 • View all Synth modules
 
Amplifier for audio signals
Notes: 2SIGNALAMP contains two amplifier stages for audio signals; the amplification can be adjusted up to 15:1.

A clip LED indicates that the amplified level exceeds the usual range of AE modular and is short before clipping.

Main purpose of this module is to boost external audio signals for further processing within AE modular, or also the triangle output of the VCO which has by design a lower signal amplitude.
Read more
 1 in stock $28.92
Cat: 719722 Rel: 02 Sep 19 • View all Synth module accessories
 
Blank module for AE modular - 1U
Notes: If your rack isn't filled completely with modules, use this blank module to fill the spaces.
Read more
 1 in stock $3.12
Cat: 719730 Rel: 03 Sep 19 • View all Synth module accessories
 
AE modular Eurorack adapter frame
Notes: The AE modular Eurorack adapter frame allows to integrate AE modular modules into Eurorack systems. It is basically an empty Eurorack-sized frame that can take up to 12 units of AE modules where two units are occupied by the mandatory MASTER module. Via the MASTER module the frame is powered from the Eurorack bus.

The product includes:

- The mounting frame with screws for mounting the AE modules
- The ribbon cable for Eurorack bus connection
- The bus cable
Read more
 1 in stock $31.53
Cat: 719673 Rel: 02 Sep 19 • View all Synth modules
 
Clock divider module
Notes: The BEAT DIVIDER takes a clock signal (the BUS CLK which presents the MIDI clock from the MASTER module) and divides it to musical clock dividers, selectable from 1/2... 1/32.

Additionally, a second output provides the dotted or triplet clock of the selected divider value.
Read more
 1 in stock $27.36
Cat: 719676 Rel: 02 Sep 19 • View all Synth modules
 
Noise generator
Notes: Analogue & Digital Noise Module.

- The A output generates analogue noise (technically, a fluctuating voltage between about 1...4V)
- The D output generates digital noise, which is a random changing 0V / 5V

The RATE knob controls the colour of the noise, which goes from almost white noise on A output and knob fully clockwise to a rather harsh and digital sound on D output and RATE counter-clockwise.
Read more
 1 in stock $26.04
Cat: 719682 Rel: 02 Sep 19 • View all Synth modules
 
Dual NAND, AND, XOR inverter
Notes: The LOGIC module combines two inputs by different logical rules (AND, NAND, XOR). This can be used either for operations on trigger/gate signals (let gate signals pass depending on other signals, invert them depending on the other input etc), or for audio signals, where you get ringmodulator-like sounds when feeding two different oscillator frequencies.
Read more
 1 in stock $24.75
Cat: 719663 Rel: 02 Sep 19 • View all Synth modules
 
Dual audio & CV level attenuator
Notes: 2ATT/CV contains two units of a simple level attenuator for any kind of signal. You can also switch to voltage mode and get manually controllable CV on the outputs.
Read more
 1 in stock $28.66
Cat: 719656 Rel: 03 Sep 19 • View all Synth modules
 
State variable filter
Notes: This module is a classic state variable filter.

It offers the control knobs cut-off frequency, resonance and CV attenuator; two signal inputs for different signal levels control the "drive" of the module. Compared to the wasp filter, this module has a significant self-resonance, and also a very quick response to cut-off frequency changes.

Three different outputs provide lowpass, bandpass and high-pass output.
Read more
 1 in stock $36.47
Cat: 732823 Rel: 05 Sep 19 • View all Synth modules
 
Nutube-based distortion module - 18HP
Notes: The M T2D dual triode distortion is a Nutube-based distortion module for the Eurorack format, offering two independent channels which can be patched separately for parallel processing, stereo, or multiple sources, or used in series for more complex distortion of a single source (or simply extreme distortion settings).

Spectral tilt filters before each triode stage alternately boost or cut high and low frequencies for different harmonic emphasis. These filters also affect the feedback loops, and can interact in very interesting ways with high feedback settings. The individual tube bias controls can also have a strong influence in combination with high feedback levels, in addition to more subtle shaping of the distortion when feedback levels are low.

Independent control of input level, tube bias, feedback level, and dry/wet mix is available for each channel, with CV inputs for the bias and mix controls. The CV inputs for the mix controls also have dedicated attenuators. A global plate voltage switch offers two different character options, for either smoother distortion or more severe clipping.
Read more
 3 in stock $373.09
Click for better price!
quote 732823
Genki Instruments Wave Ring Controller (Bluetooth MIDI controller)
Cat: 744609 Rel: 06 Sep 19 • View all MIDI controllers
 
Wearable Bluetooth MIDI controller
Notes: Wave is the ring that allows musicians to easily control sound, shape effects and send commands with the motion of their hands. It offers six functions that can be used individually or combined in any way you like: Tilt, Pan, Roll, Vibrato, Tap, Click.

Four different motions allow you to control any parameter in a new way. By tapping any surface you can trigger notes or samples. Easily accessible buttons on the ring allow you to cycle between presets, send commands and simply pause Wave so you can move your hands freely without changing anything.

You can easily customize each function to suit your setup. You can for example customize:

- Movement range
- Sensitivity of taps (how hard you need to hit the surface)
- CC values of output
- Which note values are sent out by taps and button clicks

Users can use Wave with Softwave, a software layer that allows users to intuitively map movements to MIDI messages or host AU/VST3 plugins and create their own presets. Softwave comes for free with every Wave and has a built-in synthesizer engine so users can start playing right away.

With the purchase of Wave users also receive access to Native Instrument's Reaktor Blocks which includes Waveblock. Waveblock connects Wave instantly to Blocks and allows users to combine Wave out of the box with Reaktor's powerful synthesis engine.

Wave also works as a stand alone MIDI controller that connects to your DAW. Each function can be mapped to control different parameters directly within your DAW.

The Wavefront module is the Eurorack receiver for Wave that allows Wave to connect to modular synthesizers. With Wavefront you can completely bypass the computer and bring unprecedented sound control, effect shaping and manipulation to modular setups.
Read more
 1 in stock $287.63
Click for better price!
quote 744609
Cat: 744610 Rel: 06 Sep 19 • View all Synth modules
 
Eurorack receiver for the Wave sensor that allows Wave to connect to modular synthesisers - 4HP
Notes: The Wavefront module is the Eurorack receiver for Wave that allows Wave to connect to modular synthesizers. With Wavefront you can completely bypass the computer and bring unprecedented sound control, effect shaping and manipulation to modular setups.

Use subtle gestures to add vibrato to your favourite lead synth module, or use more visible gestures while performing.

The buttons are great for triggering sequences while the tap lets you interact with percussive modules in a completely new way. Drumming on a table has never been as fun!

To use Wavefront you need one Wave (ring) per module.
Read more
 1 in stock $191.75
Click for better price!
quote 744610
Cat: 736452 Rel: 21 Aug 19 • View all Studio monitors
 
Single 2-way active studio monitor with wave guide
Notes: With their smooth, accurate frequency response; powerful amplification with tons of headroom; and acoustic tuning functions that ensure you always get the best sound... it's no wonder that the original Eris-series studio monitors have been a runaway hit since their introduction. The Eris E5 XT is a substantial update to a lauded classic. Deeper lows and a wider, more controlled sweet spot (thanks to its new EBM wave guide design) mean that our best-selling studio monitors just got even better.

Studio speakers with a wide sweet spot:

We outfitted the Eris XT studio monitors with a new EBM (Elliptical Boundary Modelled) wave guide designed by none other than Hugh Sarvis of WorxAudio, the mind behind our award-winning CDL loudspeakers and lauded R-Series monitors. The result? A superior high-frequency response and wider 100-degree horizontal dispersion to create a broader sweet spot. It's ideal for group listening and collaboration - while narrow vertical dispersion reduces reflections from your desk. Silk-dome tweeters ensure snappy, accurate transient reproduction.

Lows that go lower:

The familiar woven composite low-frequency driver still offers Eris' signature tight, clear bass; plenty of punch and no flub. Eris E5 XT studio monitors sport a ported enclosure that is larger than that of their predecessors, allowing them to reach down to an astonishing 48 Hz. That's 10 Hz below previous models - with no subwoofer required!

Set up your studio monitors for your room:

We know modern recording studios can be anywhere from a spare bedroom to a multi-million dollar facility; that's why every studio monitor we make is equipped with controls that ensure the flattest response in your mix environment. Acoustic tuning controls allow you to configure the Eris E5 XT perfectly for your room - you get Low-cut, Mid, and High controls, as well as 3-way acoustic space tuning that allows you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner.

Studio monitor connections:

It's easy to feed audio to your Eris E5 XT studio monitors from an audio interface, mixer, monitor controller, or almost any other line-level source. Eris E5 XT monitors provide balanced XLR, balanced 1/4" TRS, and unbalanced RCA line-level inputs. You'll have no problem hooking your Eris speakers up to virtually anything.

Accuracy defined:

Suitable for both home recording studios and professional mix engineering, the Eris XT studio monitors combine sterling audio quality with the flexible tuning and connectivity you've come to expect from PreSonus. It's Eris, remastered.
Read more
 2 in stock $124.02
Click for better price!
quote 736452
Cat: 745131 Rel: 27 Aug 19 • View all Wireless microphones
 
UHF handheld transmitter compatible with Chord NU2 wireless systems
Notes: Handheld transmitter for Chord NU series dual channel wireless receivers. Available in 4 different carrier frequency versions with pilot tone for compatibility with NU2 systems.
Read more
 1 in stock $41.68
Click for better price!
quote 745131
Cat: 742759 Rel: 14 Aug 19 • View all Audio cables
 
Right-angle 1/4" TRS to dual right-angle 1/4" TS - 1 metre length
Notes: This cable is designed to connect a channel insert on a mixing console to an effects processor with unbalanced phone jacks. Right-angle plugs allow easy access to jacks with minimal clearance. Features include:

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility

Connectors: Right-angle 1/4 in TRS to Dual Right-angle 1/4 in TS
Read more
 2 in stock $5.73
Notes: The A-100LC1v is a smaller version of the A-100LC3 with 48 HP of space. It is made out of raw wood, a black coating gives the Eurorack frame a vintage look. The built-in power supply, type A-100SSB, delivers up to 380 mA at +12 V and -12 V as well as 100 mA at +5 V.

The A-100LC1v comes equipped with one 48 HP measuring row for 3U modules. Its power supply features eight connectors for oscillators, filters and so forth. The case is connected to the grid via an IEC power socket.
Read more
 1 in stock $138.61
Click for better price!
quote 743113
Xaoc Devices Poti Silver Faceplate (synth module faceplate)
Cat: 743917 Rel: 15 Aug 19 • View all Synth accessories
 
High quality screenprinted panel in silver
Notes: Replacement silver panel for XAOC Devices Poti, expander module for the Batumi quadruple digital LFO.

No soldering required.

Width: 3HP
Read more
 1 in stock $27.09
Cat: 743790 Rel: 16 Aug 19 • View all Studio accessories
 
Small bench with cushion
Notes: Quiklok quality line keyboard bench with extra-thick vinyl seat.

Weight: 5 kg
Depth: 25 cm/ 10"
Weight capacity: 112 kg / 250 lb
Width: 53 cm / 21"
Thickness: 7.5 cm / 3"
Height positions: 48/51/58 cm (18.8" / 20" / 22.8")
Read more
 4 in stock $31.53
Cat: 745114 Rel: 27 Aug 19 • View all Wireless microphones
 
Dual wireless microphone system
Notes: Dual wireless microphone system with fixed UHF receiver and 2 handheld transmitters. The receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.

In the box:

Dual channel receiver
2 x handheld transmitters
4 x AA batteries
2 x UHF antennas
2 x antenna leads
2 x rack-mounting ears
Mains power adaptor
6.3mm jack to jack lead
Read more
 2 in stock $91.70
Click for better price!
quote 745114
Cat: 745116 Rel: 27 Aug 19 • View all Wireless microphones
 
Dual wireless microphone system
Notes: Dual wireless microphone system with fixed UHF receiver and 2 handheld transmitters. The receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.

In the box:

Dual channel receiver
2 x handheld transmitters
4 x AA batteries
2 x UHF antennas
2 x antenna leads
2 x rack-mounting ears
Mains power adaptor
6.3mm jack to jack lead
Read more
 2 in stock $91.70
Click for better price!
quote 745116
Cat: 745122 Rel: 27 Aug 19 • View all Wireless microphones
 
UHF handheld transmitter compatible with Chord NU2 wireless systems
Notes: Handheld transmitter for Chord NU series dual channel wireless receivers. Available in 4 different carrier frequency versions with pilot tone for compatibility with NU2 systems.
Read more
 1 in stock $41.68
Click for better price!
quote 745122
Cat: 745132 Rel: 27 Aug 19 • View all Wireless microphones
 
UHF handheld transmitter compatible with Chord NU2 wireless systems
Notes: Handheld transmitter for Chord NU series dual channel wireless receivers. Available in 4 different carrier frequency versions with pilot tone for compatibility with NU2 systems.
Read more
 2 in stock $41.68
Click for better price!
quote 745132
Cat: 745118 Rel: 27 Aug 19 • View all Wireless microphones
 
Dual UHF wireless beltpack system
Notes: Dual wireless microphone system with fixed UHF receiver and 2 beltpack transmitters, supplied with a choice of neckband or lavalier microphones. The receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.

In the box:

Dual channel receiver
2 x beltpack transmitters
2 x neckband microphones
2 x lavalier microphones
4 x AA batteries
2 x UHF antennas
2 x antenna leads
2 x rack-mounting ears
Mains power adaptor
6.3mm jack to jack lead
Read more
 2 in stock $120.15
Click for better price!
quote 745118
Cat: 745120 Rel: 27 Aug 19 • View all Wireless microphones
 
Dual UHF wireless beltpack system
Notes: Dual wireless microphone system with fixed UHF receiver and 2 beltpack transmitters, supplied with a choice of neckband or lavalier microphones. The receiver unit is compatible with standard 19" racks using the included rack ears and front mounting antenna accessories.

In the box:

Dual channel receiver
2 x beltpack transmitters
2 x neckband microphones
2 x lavalier microphones
4 x AA batteries
2 x UHF antennas
2 x antenna leads
2 x rack-mounting ears
Mains power adaptor
6.3mm jack to jack lead
Read more
 2 in stock $120.15
Click for better price!
quote 745120
Cat: 745125 Rel: 27 Aug 19 • View all Wireless microphones
 
UHF handheld transmitter compatible with Chord NU2 wireless systems
Notes: Handheld transmitter for Chord NU series dual channel wireless receivers. Available in 4 different carrier frequency versions with pilot tone for compatibility with NU2 systems.
Read more
 1 in stock $41.68
Click for better price!
quote 745125
Cat: 743616 Rel: 29 Aug 19 • View all DJ controllers
 
4-channel performance DJ controller for Serato DJ Pro
Notes: Flagship Serato business from Pioneer. The brand's top-of-the-range DDJ-1000 controller gets reconfigured for Serato. Same hardware layout as the standard version but optimised for DJ Pro instead of Rekordbox.

Supplier notes:
The Serato-compatible version of our popular DDJ-1000 is here - meet the DDJ-1000SRT. This 4-channel DJ controller for Serato DJ Pro is designed to feel just like our club-standard CDJ+DJM setup. You'll enjoy low-latency, full-size jog wheels and a slick MAGVEL FADER for tight scratching. And with On Jog Display, which shows you important track information in the centre of each jog wheel, you can concentrate on the crowd, not your laptop.

Build excitement on the dancefloor and create huge drops using 4 Sound Colour FX and 14 Beat FX. The DDJ-1000SRT comes with a free voucher for Pitch 'n Time DJ, enabling you to get creative with advanced key-related features. With multiple inputs and outputs, you can enhance your setup by connecting external equipment like CDJs, the DDJ-XP1, or turntables. This Serato DJ Pro controller will take your gigs to the next level.

Big Jog and Magvel Fader:
Scratching feels intuitive thanks to the full-size jog wheels, which you can set to your preferred resistance using Jog Adjust, and a MAGVEL FADER. Highly durable for more than 10 million movements, the MAGVEL FADER makes intricate performances feel easy.

Club-style layout:
The buttons and knobs on this Serato DJ Pro controller are arranged in the same way as those on our club-standard NXS2 DJ equipment. As a result, transitioning between this setup and gear you find in DJ booths is a breeze.

On Jog Display:
See all the information you need via the full-colour, high-definition LCD screen in the centre of each jog. Monitor playback time, BPM, playback position, and more. This feature's easy to use, with the display matching the Serato DJ Pro GUI.

Professional FX:
Enhance tracks using 4 popular Sound Colour FX - Pitch, Filter, Dub Echo, and Noise - from our DJM-series DJ mixers, and get creative with 14 Beat FX. You can instantly reference BPM and the name of the selected FX thanks to the dedicated Beat FX screen.

Well connected:
The DDJ-1000SRT has 4 inputs so you can connect to CDJs or analogue turntables, and use it as a stand-alone DJ mixer. You can also connect directly to PA speakers and microphones thanks to a Booth, 2 Master, and 2 Mic inputs.
Read more
 1 in stock $1,395.46
Click for better price!
quote 743616
Notes: This cable is designed to convert an insert on a mixing console to a direct output, allowing a channel to be sent to both a recorder and the master bus. Features include:

- Nickel-plated plugs for rugged durability and efficient signal transfer
- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
- OFC spiral shields for effective EMI and RFI rejection and flexibility

Connectors: Serviceable 1/4 in TRS to 1/4 in TSF
Read more
 1 in stock $9.90
Cat: 740060 Rel: 23 Aug 19 • View all Preamplifiers
 
Versatile, great-sounding front end for recording & live sound
Notes: With superb audio specifications and connectivity and featuring an outstanding microphone preamp, the TASCAM SERIES 8p Dyna is a great choice for both studio and stage. Housed in a rugged 1U rack-mount casing, its dual S/MUX optical ports make it a perfect expansion unit for a TASCAM SERIES 102i or SERIES 208i or other S/MUX-equipped audio interfaces including ADAT, or use it as a stand-alone front end.

Each SERIES 8p Dyna channel also features individually switched +48V phantom power for use with condenser mics, and an easy-to-use, single-control analog compressor with true bypass.

A Superior Front End for Studio and Stage:

TASCAM has long been known for transparent, natural, ultra-low-noise preamps, and the eight TASCAM no-compromise HDIA (High Definition Instrumentation Architecture) preamps in the SERIES 8p Dyna are its best preamps yet; the noise level (EIN) is at -127dBu, the THD is 0.0007%, the dynamic range is 116dB, and the crosstalk is 119dB. Each SERIES 8p Dyna channel also features an easy-to-use, single-control analog compressor with true bypass for handling hot input signals and creating smooth audio input.

Versatile Inputs:

With two instrument/microphone combo inputs on the front panel, you can quickly plug in mics, guitars, bass and more. Six balanced mic/line inputs grace the rear. Every microphone input has individually switched +48V phantom power for using different types of microphones such as Dynamic, Condenser, Ribbon and vintage for proper operation and safety. It adds up to a multi-purpose front end for recording and live sound.

Expand Your Interface or Other Device:

Dual S/MUX optical outputs on the rear of the SERIES 8p Dyna enable you to use the unit as a front end expander for S/MUX-equipped audio interfaces, such as TASCAM's SERIES 102i and SERIES 208i, and Celesonic US-20x20. ADAT compatibility is also available. With two S/MUX outputs, you can send all eight SERIES 8p Dyna channels at up to 96 kHz (four channels at 176.4 or 192 kHz), dramatically expanding your system's capabilities.

Send to Anything:

The SERIES 8p Dyna's eight line-level analog channel outputs are provided on both 1/4-inch balanced TRS connectors and balanced 25-pin D-Sub connectors. Route signals to interfaces, recording mixers, front-of-house consoles, and pretty much anything else. Connect its D-Sub outputs to a TASCAM ML-16D or ML-32D Analog Dante converter, and it becomes a pristine front end for an audio-over-IP network.

The Features Professionals Need:

From its high-end preamps to its versatile outputs, the SERIES 8p Dyna is a thoroughly professional product, right down to its rugged metal 1U rack-mount enclosure. Word clock in and out BNC connectors with an In/Out/Thru switch enable proper synchronization of digital signals. Front-panel analog overload indicators, compression indicators, and digital peak and level meter bars let you monitor the unit's performance. Yet the SERIES 8p Dyna is simple to operate so you can stay focused on the task at hand.
Read more
 1 in stock $557.56
Click for better price!
quote 740060
Rode Lavalier GO Microphone (clip-on microphone)
Cat: 742132 Rel: 16 Aug 19 • View all Lavalier microphones
 
Professional-grade wearable microphone
Notes: Lavalier GO is a professional-grade wearable microphone designed for use in a wide range of applications. The 3.5mm TRS connector is designed to pair perfectly with the RODE Wireless GO and most recording devices with a 3.5mm TRS microphone input.

Lavalier GO is designed to perform excellently in any broadcast application. Featuring a discreet 4.5mm omnidirectional microphone, it delivers crystal clear audio in all environments and is incredibly forgiving when it comes to placement on talent, allowing for greater flexibility in fast-paced situations.

A foam pop shield is supplied to minimise wind noise and vocal plosives (hard 'b', 't' and 'p' sounds), as well as a durable mounting clip with in-built cable management for quick and easy rigging. It also features a hard-wearing Kevlarr reinforced cable, designed to withstand the rigours of any shoot.
Read more
 3 in stock $61.49
Click for better price!
quote 742132
Notes: 2.5mm TRS male to 5-pin DIN MIDI female adapter for UNO Synth & UNO Drum - 10cm / 3.9". Also suitable for other MIDI interfaces using 2.5mm TRS to 5-pin DIN MIDI.
Read more
 2 in stock $29.98
Cat: 739891 Rel: 30 Aug 19 • View all Synth modules
 
Intuitive pitch CV sequencer in 4HP
Notes: Ultra-simple 16-step Eurorack CV sequencer with randomisation option and storage for up to 16 patterns. Straight to the point business, all in just 4HP of rack space.

Supplier notes:
Small, easy-to-program sequencers are a bit of a rarity. Vox Digitalis is our answer to this issue. With intuitive displays and simple controls, VD is perfect for all your pitch CV needs. Set your sequence length, dial in each note, randomize, save and load 16 sequences -- VD does all the stuff the big sequencers do, just in 4HP.
Read more
 1 in stock $169.86
Click for better price!
quote 739891
Cat: 735372 Rel: 27 Aug 19 • View all Studio mixers
 
Compact mixer with USB/Bluetooth
Notes: Compact format audio mixer with 6 mono input channels and a stereo line input. Each mono channel has a combo XLR/jack input with individually switchable mic/instrument impedance and +48V phantom power for the XLR. Input channels have High/Low EQ and Pan controls and mono channels also have Effects level to vary the amount of internal digital delay effect added for vocals or instruments. An internal player/recorder with backlit display can accept a USB memory stick containing compressed audio files in various formats or alternatively connect to a smart phone via Bluetooth for wireless link. Output is delivered on a pair of balanced XLR connectors and offers very low noise operation for high quality studio or live performances.
Read more
 2 in stock $96.91
Click for better price!
quote 735372
Cat: 731183 Rel: 30 Aug 19 • View all Synth modules
 
5U version of the Noise Engineering dynamic wavetable oscillator
Notes: Cursus Iteritas Magnus is an oscillator that works from a dynamically generated wavetable. It gives the user spectral-like controls over three different modes based on different conceptualizations of frequency: Fourier, which uses sine waves; Daubechies, using wavelets; and Walsh mode, using the Walsh transform. Cursus Iteritas Magnus parametrizes a wide variety of sounds, but because the sounds are all based on orthogonal functions, it has a musical tone structure and can produce an extremely wide variety of harmonic sounds

Cursus Iteritas Magnus is the 5U version of Cursus Iteritas.
Read more
 1 in stock $403.31
Click for better price!
quote 731183
EBS
Cat: 743786 Rel: 22 Aug 19 • View all Audio cables
 
Compact, flexible ‘black gold’ flat patch cable - 28cm length
Notes: EBS Flat Patch Cables have helped pedalboard users to optimize the use of space on their pedal boards and revolutionized the patch cable market.

With the new addition of EBS High Performance (HP) 'black gold' flat patch cables, you will have access to a cable that both save space and provide premium signal quality at the same time.

The new tin plated copper braid shield improves the shielding capability immensely to guarantee no signal loss on your pedalboard. It also improves the durability of the cables.

The cables also have extremely low capacitance & resistance to prevent any signal loss.

The contact has a 24K Gold plated tip, a unique black chrome finish, and a ribbed surface on the side of the housing for better grip and identity.

Available in four lengths to cover your needs; 10, 18, 28 and 58 cm.
Read more
 2 in stock $10.68
EBS
Cat: 743785 Rel: 22 Aug 19 • View all Audio cables
 
Compact, flexible ‘black gold’ flat patch cable - 18cm length
Notes: EBS Flat Patch Cables have helped pedalboard users to optimize the use of space on their pedal boards and revolutionized the patch cable market.

With the new addition of EBS High Performance (HP) 'black gold' flat patch cables, you will have access to a cable that both save space and provide premium signal quality at the same time.

The new tin plated copper braid shield improves the shielding capability immensely to guarantee no signal loss on your pedalboard. It also improves the durability of the cables.

The cables also have extremely low capacitance & resistance to prevent any signal loss.

The contact has a 24K Gold plated tip, a unique black chrome finish, and a ribbed surface on the side of the housing for better grip and identity.

Available in four lengths to cover your needs; 10, 18, 28 and 58 cm.
Read more
 2 in stock $9.64
EBS
Cat: 743788 Rel: 22 Aug 19 • View all Audio cables
 
Compact, flexible ‘black gold’ flat patch cable - 58cm length
Notes: EBS Flat Patch Cables have helped pedalboard users to optimize the use of space on their pedal boards and revolutionized the patch cable market.

With the new addition of EBS High Performance (HP) 'black gold' flat patch cables, you will have access to a cable that both save space and provide premium signal quality at the same time.

The new tin plated copper braid shield improves the shielding capability immensely to guarantee no signal loss on your pedalboard. It also improves the durability of the cables.

The cables also have extremely low capacitance & resistance to prevent any signal loss.

The contact has a 24K Gold plated tip, a unique black chrome finish, and a ribbed surface on the side of the housing for better grip and identity.

Available in four lengths to cover your needs; 10, 18, 28 and 58 cm.
Read more
 2 in stock $11.72
Items 1 to 50 of 67 on page 1 of 2
1  2  »

Filter

Saved Searches
Save current search
Release Date
Featured
Close