Search dance music

Notes: Drum module

Notes: Miggs is a passive utility module consisting of an attenuator and signal multiple. All sections are normalled together to reduce the amount of cables needed to enact common utility patching scenarios. It is best used to distribute control voltages to a small system's oscillator bank, or to construct complicated feedback networks in audio processing patches.

2 x5 multiple (normalled together as 1x9)
Passive attenuator works in both directions (normalled to multiple input) - Consumes no current and takes a minimum of space.

Notes: This is a double CV-source, from 0 to 10 V, controlled by stereo fader. The controller makes it possible to perform sweeps, widely used in modern electronic music. The effect is similar to "wobble" or scratching. CV1 and CV2 generate 0 volts in the middle position of the fader, 10 volts at the top and bottom position. DEPTH1 and DEPTH2 control the depth of CV1 and CV2.

Notes: Blank panels for Intellijel 1U spaces. Made from high quality brushed aluminum that matches the 1U modules.

These can also be used for DIY purposes if you drill / mill them to fit your own custom circuits.

Notes: Dimensions: 16 HP

Notes: HEXAGAIN is a six voice polyphonic audio VCA plus a six voice mixer with master level control and two ODD/EVEN channels for a stereo output and clipping indicator. All six VCA ins and outs are simultaneously available through Polytip jacks and 3.5mm jacks so the module can be used in a variety of ways both polyphonic or multi-voice monophonic. The fully analogue audio path has exponential CV control. CV inputs are 0-5V, typical audio input is 10Vp.p. A global Offset knob allow to open all VCAs manually or apply positive offset to incoming CV.

Size: 12HP

Notes: OCTOSTAGES is an eight voice fully analogue envelope generator. Its typical use is to patch polyphonic synthesizers with the use of only a few single Polytip cables. Each of the eight envelopes feature a Gate in, Envelope OUT, Velocity CV in and Attack CV in control as well as an output led indicator. A master output level knob and CV using 3.5mm jack are provided to control or modulate all envelope output levels globally. To tap to each envelope in, out or CV using discrete modules the OCTO I/O module can be used as an expander. As there are eight EGs in the module special attention has been given for power consumption efficiency.

Size: 20HP

Notes: OCTOPASS is an eight voice 24db/octave low pass filter based on the classic 2044 filter. All eight filters are fully analogue with gain compensation of resonance and the lovely lush sound of classic synths. A global frequency modulation CV using a 3.5mm jack can be used to modulate all eight incoming CVs of the Polytip jack. The typical use is to patch polyphonic synthesisers with the use of only a few Polytip patch cables for its audio ins and outs and its cut-off frequency controls. To tap each filter I/O or CV using discrete modules the OCTO I/O module can be used as an expander. As there are eight filters in the module special attention has been given to power consumption efficiency.

Size: 20HP

Notes: Vortex 6 is a polyphonic 6 voice ART wavetable oscillator inspired by the hardware design and sound of the PPG Wave 2.2. Dozens of wavetables are provided internally and user tables can be loaded via SD CARD. VORTEX6 has built in Vibrato, Glide, and six wave table scrolling envelopes all with CV. ART in jack and a built-in voice manager take care of incoming notes and distribute them to audio gate and velocity outs either on per voice 3.5mm jacks or the Polytip jacks. Together with OCTOPUS, one or more OCTOSTAGES, OCTOPASS and HEXAGAIN and a few Polytip patch cables make a complete six voice polyphonic synth. Alternatively VORTEX6 can be patched to discrete mono modules or use its voice mix out for paraphonic soundscapes.

Size: 20HP

Notes: Octo I/O is a bi-directional passive Polytip to 3.5mm expander and a Polytip Mult. The expander section lets you break out to each individual voice from a polyphonic module. The mult section lets you mult Polytip polyphonic signals from one source to multiple destinations. For example patching the OCTOSTAGES envelopes to control both your OCTOPASS filters and HEXAGAIN VCAs.

Dimensions:
6 HP

Current Draw:
Module does not draw current

Notes: The Rakit GO! will take care of your portable eurorack fix. Now you'll be able to take your modules everywhere. What's more, the GO! has a slew of protection features built in, protecting your GO! module, supply/powerbank and greatly reducing the chance of damage to modules through user error. The power supply has a robust and reversible USB C connector for the best possible USB connection. The GO! has been engineered from the ground up, making full use of 5V powerbanks/supplies that are widely available on the market. At only 2hp wide and 27mm deep, GO! is ready to fit in any case.

To start using your GO! power supply you will need a passive bus board and your choice of 5V powerbank or USB AC adapter.

Protection features:

- Supply/Powerbank protection - reverse voltage, overcurrent (fast eFuse)
- GO! Input protection - reverse voltage, overvoltage, undervoltage, overcurrent (fast eFuse)
- Module protection - all rails current limited and overvoltage protected
- +12V & -12V LEDs indicate bus health (very dim below +-11.75V)

What's included:

- GO! Module
- 18W High Quality USB C Cable
- 16 way ribbon cable
- 2 x M3 Screws
- Manual