100% Secure Shopping

Studio equipment

Our full range of studio equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.

Visit Juno Studio

100% Secure Shopping

DJ equipment

Our full range of DJ equipment from all the leading equipment and software brands. Guaranteed fast delivery and low prices.Visit Juno DJ

Home  All Genres  

Search dance music

Options
Items 1 to 50 of 181 on page 1 of 4
1  2  3  4  »
Doepfer Male 6.3mm Jack To 3.5mm Mini Jack Adapter Cable (3.0m long)
Cat: 757331 Rel: 28 Nov 19 • View all Audio cables
 
Adapter cable for modular systems
Notes: - 6.3 mm jack male mono to 3.5 mm jack male mono
- Length: 3 metres
Read more
MRP:$11.69 SAVE 31%
! low stock $8.12
Doepfer Male 6.3mm Jack To 3.5mm Mini Jack Adapter Cable (1.5m long)
Cat: 757329 Rel: 28 Nov 19 • View all Audio cables
 
Adapter cable for modular systems
Notes: - 6.3 mm jack male mono to 3.5 mm jack male mono
- Length: 1.5 metres
Read more
MRP:$10.39 SAVE 45%
 More than 10 in stock $5.69
Doepfer Dark Time MIDI/USB Analog Sequencer (white & blue LED version, supplied with 2 pin Euro plug)
Cat: 755439 Rel: 12 Nov 19 • View all Sequencers
 
MIDI/USB analogue sequencer with white/blue LEDs (240V only)
Notes: Iconic analogue step sequencer from modular innovators Doepfer. Compatible with all MIDI or CV/gate synths, allowing a huge range of programming and sequencing options, plus real-time tweaking. A firm Juno favourite.

Supplier's notes:
Dark Time is an 2x8 step analogue sequencer with CV/Gate, USB and MIDI interface. It is intended as an add-on for the Dark Energy but may be used in combination with other MIDI, USB or CV/Gate equipment too.
Read more
 4 in stock $463.41
Click for better price!
or call +44 20 7424 1960
quote 755439
Doepfer Dark Energy 3 Semi Modular Analogue Monophonic Desktop Synthesizer
Cat: 676098 Rel: 04 Apr 18 • View all Synthesisers
 
Fully analogue, monophonic stand-alone synthesiser with USB & MIDI interface
Notes: Third-gen version of Doepfer's brilliant semi-modular synth. A very capable synth in its own right but comes alive when used as the starting point for a Eurorack setup.

Supplier's notes:
The Dark Energy III is a monophonic stand-alone synthesizer with USB and MIDI interface. The sound generation and all modulation sources are 100% analog, only the USB/MIDI interface contains digital components. It is built into a rugged black metal case with wooden side plates. High quality potentiometers with metal shafts are used and each potentiometer is fixed to the case (no wobbly shafts and knobs). The distance between the controls is wider compared to A-100 modules, and knobs with vintage look are used.

Doepfer say that the main differences between II and III are an improved VCO (no warm-up period, additional triangle waveform, wider frequency range), resettable LFOs, improved ADSR and a lot of internal access points for DIYers.
Read more
MRP:$565.20 SAVE 18%
 1 in stock $463.41
Click for better price!
or call +44 20 7424 1960
quote 676098
Doepfer A199v Federhall Spring Reverb Module (Vintage Edition) Doepfer A199v Federhall Spring Reverb Module (Vintage Edition) Doepfer A199v Federhall Spring Reverb Module (Vintage Edition) Doepfer A199v Federhall Spring Reverb Module (Vintage Edition)
Cat: 698465 Rel: 15 Aug 18 • View all Synth modules
 
Reverb effects module with spring reverb tank - 8HP
Notes: Module A-199 is a spring reverb module. The reverb effect is electronically simulated by means of 3 spiral springs. Spring reverb systems have a very characteristic sound that is based on the (insufficient) mechanical properties of the springs like signal delays, audio resonances, limited frequency range, acoustic feedback behaviour, sensitivity to mechanical shocks and others.

The 3-spring system used in the A-199 ensures a "dense" reverb because of the different properties of the three springs.

The A-199 implies some special features that are not self-evident for spring reverb units:

The reverb signal can be fed back to the input using the Feedback control. Even self-oscillation of the springs similar to the self-oscillation of filters is available. The feedback loop can lead even via external modules like VCA, VCF, phaser, frequency shifter, vocoder, distortion/waveshaper, ring modulator and others. In this case the reverb output of the A-199 is connected to the input of the external module(s) and the output of the external module(s) is fed back to the Ext. Feedback In socket of the A-199. This socket contains a switch that interrupts the internal feedback loop as soon as a plug is inserted.

Another feature is the Emphasis control. This enables the adjustment of the accentuation of middle frequencies (around ~ 2kHz).

With the Mix control the relation between original and reverb signal appearing at the mix output is adjusted.

Using all these features very extreme and unusual effects can be generated with the A-199.
Read more
 2 in stock $127.76
Click for better price!
or call +44 20 7424 1960
quote 698465
Doepfer A199 Federhall Spring Reverb Module Doepfer A199 Federhall Spring Reverb Module
Cat: 577748 Rel: 15 Aug 18 • View all Synth modules
 
Reverb effects module with spring reverb tank - 8HP
Notes: Module A-199 is a spring reverb module. The reverb effect is electronically simulated by means of 3 spiral springs. Spring reverb systems have a very characteristic sound that is based on the (insufficient) mechanical properties of the springs like signal delays, audio resonances, limited frequency range, acoustic feedback behaviour, sensitivity to mechanical shocks and others.

The 3-spring system used in the A-199 ensures a "dense" reverb because of the different properties of the three springs.

The A-199 implies some special features that are not self-evident for spring reverb units:

The reverb signal can be fed back to the input using the Feedback control. Even self-oscillation of the springs similar to the self-oscillation of filters is available. The feedback loop can lead even via external modules like VCA, VCF, phaser, frequency shifter, vocoder, distortion/waveshaper, ring modulator and others. In this case the reverb output of the A-199 is connected to the input of the external module(s) and the output of the external module(s) is fed back to the Ext. Feedback In socket of the A-199. This socket contains a switch that interrupts the internal feedback loop as soon as a plug is inserted.

Another feature is the Emphasis control. This enables the adjustment of the accentuation of middle frequencies (around ~ 2kHz).

With the Mix control the relation between original and reverb signal appearing at the mix output is adjusted.

Using all these features very extreme and unusual effects can be generated with the A-199.
Read more
 3 in stock $106.10
Click for better price!
or call +44 20 7424 1960
quote 577748
Doepfer A160-1 Clock Trigger Divider Module Doepfer A160-1 Clock Trigger Divider Module Doepfer A160-1 Clock Trigger Divider Module
Cat: 577765 Rel: 10 Sep 19 • View all Synth modules
 
Frequency divider for clock, trigger & gate signals - 4HP
Notes: Module A-160 is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Trigger input will take clock signals from, e.g. an LFO, MIDI sync, or the gate from a MIDI-CV interface.

At the outputs, you have access to the sub-divided clock signals, from half the clock frequency down to 1/64. The low/high levels of the output signals are 0V and about +10V.

The A-160 also has a reset input. Whenever a reset signal is sensed, all outputs are set to zero, until the reset voltage disappears.

The Clock Divider can be used in combination with the A-161 Clock Sequencer to produce stepped sequences with a length of from one to eight events.
Read more
MRP:$70.16
 5 in stock $67.12
Click for better price!
or call +44 20 7424 1960
quote 577765
Doepfer A156v Dual Quantizer Module (vintage edition) Doepfer A156v Dual Quantizer Module (vintage edition) Doepfer A156v Dual Quantizer Module (vintage edition)
Cat: 745785 Rel: 10 Sep 19 • View all Synth modules
 
Dual quantizer for CV's, converting a continuous positive input voltage into a stepped output voltage - 8HP
Notes: Module A-156 is a Dual Control Voltage Quantizer. A quantizer converts a continuous control voltage in the range 0...+10V into a stepped output voltage in the same voltage range (i.e. only certain voltages occur). Normally 1/12 V steps are used to obtain semitone steps. Quantizer 2 of the A-156 allows has more sophisticated quantizing modes like major scale (i.e. only voltages corresponding to the major scale), minor scale, major chord, minor chord, fundamental + fifth and addition of seventh or sixth when chords are selected. Only those voltages appear at the CV output which comply with the selection rule (e.g. minor chord with seventh). The mode setting of quantizer 2 is done with 3 switches (1-0-1 type with middle position). From the factory quantizer 1 is working in the semitone mode. But there is a jumper on the pc board that can be changed so that even quantizer 1 uses the same scale as quantizer 2.

For each quantizer the following in/outputs are available:

- Control voltage input (CV In): The input for the continuous voltage to be quantized
- Control voltage output (CV Out): The output of the quantized voltage
- Trigger input (Trig.In): If this jack is left open the quantizer is working permanently. If a rectangle voltage is applied quantisation happens only at the rising edge of the signal (e.g. from an LFO or MIDI-to-Sync interface). Thus the quantizing can be synchronized with other events
- Trigger output (Trig.Out): Whenever a quantisation happens (i.e. a new voltage is generated at the CV Out) a positive pulse occurs at this output. It may be used to trigger an envelope generator (ADSR) or for triggering other modules (sequential switch A-151, trigger divider/sequencer A-160/161, trigger delay A-162, ...). If none of these functions are used the jack is left open

On top of that the A-156 is provided with a common transpose CV input having an additive effect on both quantizers. This input is quantized in semitone steps. A typical application is the transposition of a sequence generated by the A-155 by a second control voltage (e.g. coming from the MIDI-CV interface A-190).

Typical applications:

- Quantizing the CV sequence generated by an A-155 (semitone, only major scale, only minor scale and so on)
- Quantizing the voltage coming from the Trautonium Manual / Ribbon Controller A-198, Theremin A-178 or Light-to-CV module A-179 to get accurate semitones or major/minor scale tones
- Arpeggio-like effects with LFO, random, noise, envelope generators as CV sources (for negative or symmetrical voltages an offset must be added, e.g. with the offset/attenuator module A-129-3, to obtain positive voltages for the A-156 input)
Read more
MRP:$159.81 SAVE 23%
 5 in stock $122.34
Click for better price!
or call +44 20 7424 1960
quote 745785
Doepfer A138pv 4 In 2 Performance Mixer Input Module (vintage edition) Doepfer A138pv 4 In 2 Performance Mixer Input Module (vintage edition) Doepfer A138pv 4 In 2 Performance Mixer Input Module (vintage edition)
Cat: 716956 Rel: 29 Jan 19 • View all Synth modules
 
4-way input module - 16HP
Notes: Modules A-138p/o are used to built a simple performance mixer (instead of an external stand-alone mixer). Module A-138p is the 4-fold input module, A-138o is the output module that can be combined with one or more A-138p.

A-138p features:

- 4 channels
- Controls and inputs for each channel
- Input (3.5 mm mono socket)
- Signal LED (as a coarse monitor of the incoming level, the level is measured after the gain control)
- Mute switch
- Gain (control to adapt different audio levels)
- Level (the main volume control)
- Aux
- Pan
- Internal jumper for each channel to choose between Aux pre/post main Level control
- Internal connection to the output module and to other A-138p modules

Doepfer A-138p requires A-138o (no stand-alone use).
Read more
 1 in stock $126.67
Click for better price!
or call +44 20 7424 1960
quote 716956
Doepfer A138p 4 In 2 Performance Mixer Input Module Doepfer A138p 4 In 2 Performance Mixer Input Module Doepfer A138p 4 In 2 Performance Mixer Input Module
Cat: 671593 Rel: 29 Nov 17 • View all Synth modules
 
Performance Mixer system input module featuring four identical input channels - 16HP
Notes: Modules A-138p/o are used to built a simple performance mixer (instead of an external stand-alone mixer). Module A-138p is the 4-fold input module, A-138o is the output module that can be combined with one or more A-138p.

A-138p features:

- 4 channels
- Controls and inputs for each channel
- Input (3.5 mm mono socket)
- Signal LED (as a coarse monitor of the incoming level, the level is measured after the gain control)
- Mute switch
- Gain (control to adapt different audio levels)
- Level (the main volume control)
- Aux
- Pan
- Internal jumper for each channel to choose between Aux pre/post main Level control
- Internal connection to the output module and to other A-138p modules

Doepfer A-138p requires A-138o (no stand-alone use).
Read more
 2 in stock $108.27
Click for better price!
or call +44 20 7424 1960
quote 671593
Doepfer A138bv Exponential Mixer Module (vintage edition) Doepfer A138bv Exponential Mixer Module (vintage edition) Doepfer A138bv Exponential Mixer Module (vintage edition)
Cat: 716939 Rel: 29 Jan 19 • View all Synth modules
 
Logarithmic mixer for mixing up to four signals to one output - 8HP
Notes: Module A-138 is a four channel mixer, which can be used with either control voltages or audio signals. Each of the four inputs has an attenuator, and there's a master attenuator, so that the mixer can be used at the end of the audio chain - i.e. it can be used to interface directly with an external mixer, amplifier, etc.

A-138b features potentiometers with logarithmic response, so especially suitable for audio signal mixing.

Vintage Edition with a black faceplate and custom knobs.
Read more
 2 in stock $72.54
Click for better price!
or call +44 20 7424 1960
quote 716939
Doepfer A138b Exponential Mixer Module Doepfer A138b Exponential Mixer Module Doepfer A138b Exponential Mixer Module Doepfer A138b Exponential Mixer Module
Cat: 577776 Rel: 29 Nov 17 • View all Synth modules
 
Four channel mixer module - 8HP
Notes: Module A-138 is a four channel mixer, which can be used with either control voltages or audio signals. Each of the four inputs has an attenuator, and there's a master attenuator, so that the mixer can be used at the end of the audio chain, i.e. it can be used to interface directly with an external mixer, amplifier, etc.

The A-138b has potentiometers with logarithmic response, so is especially suitable for audio signal mixing.
Read more
 1 in stock $57.38
Click for better price!
or call +44 20 7424 1960
quote 577776
Doepfer A138a Linear Mixer Module Doepfer A138a Linear Mixer Module
Cat: 577762 Rel: 06 Jun 19 • View all Synth modules
 
4 channel mixer - 8HP
Notes: Module A-138 is a four channel mixer, which can be used with either control voltages or audio signals. Each of the four inputs has an attenuator, and there's a master attenuator, so that the mixer can be used at the end of the audio chain - i.e. it can be used to interface directly with an external mixer, amplifier, etc.

The A-138a version features potentiometers with linear response, so especially suitable for control voltage mixing.
Read more
 3 in stock $57.38
Click for better price!
or call +44 20 7424 1960
quote 577762
Doepfer A1354C VCPM Quad Envelope Follower Module Doepfer A1354C VCPM Quad Envelope Follower Module Doepfer A1354C VCPM Quad Envelope Follower Module
Cat: 676696 Rel: 01 Feb 18 • View all Synth modules
 
Four-fold envelope follower with adjustable attack & release time for each channel
Notes: The A-135-4C is composed of four envelope followers with adjustable attack and release. The circuit was designed to be used as an addition for the A-135-4A/B Performance Mixer, adding ducking, compressor and expander functions to the mixing system. However, thanks to a full set of inputs and outputs, it is also possible to employ the A-135-4C for other tasks.

The A-135-4C offers four identical envelope followers. Each modulator comes equipped with an audio input, attack and release potentiometers as well as a CV output. LED's visualize control voltages generated by the module. The A-135-4C can be connected to the A-135-4A/B Performance Mixer via a Ribbon cable. Users are able to determine whether audio material gets tapped off directly after the input connectors, behind the gain stages or after the level control of the A-135-4A. By plugging in patch cables into the envelope follower's inputs, the internal routing can be suspended.
Read more
 3 in stock $108.27
Doepfer A124 Wasp Filter Module Doepfer A124 Wasp Filter Module Doepfer A124 Wasp Filter Module Doepfer A124 Wasp Filter Module
Cat: 577743 Rel: 29 Nov 17 • View all Synth modules
 
12dB multimode filter module - 8HP
Notes: Module A-124 is a special 12dB multimode filter using the "strange" filter circuit of the "EDP Wasp" (an analog synthesizer with black/yellow case built end of the seventies, manufactured by the UK company "Electronic Dream Plant").

This design "abuses" digital inverters as analog operational amplifiers leading to distortions and other "dirty" effects that generate the specific sound of this filter.

The filter is equipped with a band pass output and a combined low/notch/high pass output. For this output a control knob defines the relation between low and high pass signal.

If both signals appear at the same level (i.e. middle position of the Mix knob) one obtains a notch filter. Otherwise the low or high pass signal predominates.

The module does not feature self oscillation in contrast to most of the other filters of the A-100 system.
Read more
MRP:$100.05 SAVE 19%
 6 in stock $81.19
Click for better price!
or call +44 20 7424 1960
quote 577743
Doepfer A-198 Trautonium Manual Ribbon Controller (manual only) (B-STOCK) Doepfer A-198 Trautonium Manual Ribbon Controller (manual only) (B-STOCK)
Cat: 769329 Rel: 13 Nov 19 • View all MIDI controllers
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Touching the sensor with a finger generates a control voltage CV1 that is proportional to the position of the finger. The scale (i.e. the relation between position difference and voltage difference) is adjustable with a potentiometer at the front panel. A hold switch is used to determine if the CV voltage is held after removing the finger (hold = on) or if the CV voltage jumps to 0V (hold = off). In the last case (hold = off) a gate signal is derived from the CV voltage whenever a finger touches the sensor (e.g. for triggering an envelope generator).

A sensitive pressure sensor located below the position sensor generates a second control voltage CV2 that increases with higher pressure of the finger. Even for CV2 the scale is adjustable. A second gate signal is triggered as soon as the pressure exceeds a certain value. The gate threshold is adjustable at the front panel.

The sensors are located in a separate metal frame (length about 600 mm, width about 30 mm, height about 18 mm, weight: about 900 g, colour: silver-grey). The connection between the module and the sensor frame is made by a 4 pin cable (same as used for USB connections).

Typical applications:

- Trautonium manual, the string is replaced by the position sensor that is much easier to use and cheaper than the string. In combination with the Subharmonic Oscillator A-113, the Trautonium Filter A-104 and some auxiliary modules a complete Trautonium replica may be realized. In combination with the Quantizer A-156 exact semitone intervals are possible.

- Ribbon Controller for any A-100 parameter (e.g. pitch, filter frequency, loudness, panorama, speed, modulation depth and so on)
Read more
 1 in stock $141.18
Doepfer A-198 Trautonium Manual Ribbon Controller (manual only) Doepfer A-198 Trautonium Manual Ribbon Controller (manual only)
Cat: 755442 Rel: 13 Nov 19 • View all MIDI controllers
 
Linear position sensor, for use with the A-198 module or R2M control box
Notes: Touching the sensor with a finger generates a control voltage CV1 that is proportional to the position of the finger. The scale (i.e. the relation between position difference and voltage difference) is adjustable with a potentiometer at the front panel. A hold switch is used to determine if the CV voltage is held after removing the finger (hold = on) or if the CV voltage jumps to 0V (hold = off). In the last case (hold = off) a gate signal is derived from the CV voltage whenever a finger touches the sensor (e.g. for triggering an envelope generator).

A sensitive pressure sensor located below the position sensor generates a second control voltage CV2 that increases with higher pressure of the finger. Even for CV2 the scale is adjustable. A second gate signal is triggered as soon as the pressure exceeds a certain value. The gate threshold is adjustable at the front panel.

The sensors are located in a separate metal frame (length about 600 mm, width about 30 mm, height about 18 mm, weight: about 900 g, colour: silver-grey). The connection between the module and the sensor frame is made by a 4 pin cable (same as used for USB connections).

Typical applications:

- Trautonium manual, the string is replaced by the position sensor that is much easier to use and cheaper than the string. In combination with the Subharmonic Oscillator A-113, the Trautonium Filter A-104 and some auxiliary modules a complete Trautonium replica may be realized. In combination with the Quantizer A-156 exact semitone intervals are possible.

- Ribbon Controller for any A-100 parameter (e.g. pitch, filter frequency, loudness, panorama, speed, modulation depth and so on)
Read more
 1 in stock $152.67
Click for better price!
or call +44 20 7424 1960
quote 755442
Doepfer A-196 PLL Phase Locked Loop Module Doepfer A-196 PLL Phase Locked Loop Module Doepfer A-196 PLL Phase Locked Loop Module
Cat: 755416 Rel: 14 Nov 19 • View all Synth modules
 
Eurorack phase locked loop module, featuring voltage-controlled oscillator, phase comparator & low pass filter
Notes: Module A-196 contains a so-called phase locked loop (PLL). The basic PLL system is shown in the sketch at the bottom of this page. A PLL consists of three parts: voltage-controlled oscillator (VCO), phase comparator (PC), and low-pass filter (LPF). All parts are normally connected to form a closed-loop frequency-feedback system.

This is how a PLL works: The output of the internal VCO (linear CV control, rectangle output) is compared with an external signal (e.g. the rectangle output of a A-110 VCO) in the so-called phase comparator (PC). The output of the phase comparator is a digital signal (low/high/tristate) that indicates if the frequency resp. phase difference of the two input signals is negative, zero or positive. The output of the phase comparator is processed by a low pass filter (LPF) to generate a smooth voltage that is used to control the frequency of the internal VCO. The 3 units VCO, PC and LPF form a feedback loop that works like this: The control voltage (output of the LPF) increases as long as the external frequency is higher than the frequency of the internal VCO und stops increasing when both frequencies become identical. The control voltage decreases as long as the external frequency is lower than the frequency of the internal VCO und stops decreasing when both frequencies become identical.

But there are some stumbling blocks: Different types of phase comparators with advantages and disadvantages can be made. Some phase comparators e.g. even lock at harmonics, i.e. if the two frequencies to be compared are integer multiples. But for some applications this can be used to create interesting effects. The A-196 contains 3 different types of phase comparators: PC1 is a simple exclusive OR, that even locks at harmonics. PC2 is a so-called RS flipflop and PC3 a more complex digital memory network. The user can select one of the three phase comparators with a 3-position switch. When PC2 is used a LED displays the "locked" state, i.e. when the frequency of the internal VCO is identical to the external frequency.

Special attention has to be directed to the frequency of the LPF. To obtain a smooth control voltage for the VCO the frequency of the LPF has to be much smaller than the lowest frequency of the internal or external audio signal. Otherwise the frequency of the internal VCO will jitter or wobble around the correct frequency. But for special effects this frequency jitter can be used intentionally. Example: frequencies in the range 50Hz...1kHz have to be processed with the PLL. Therefore the frequency of the LPF has to be about 10Hz or even less. Such a low frequency of the LPF causes a noticeable slew of the internal VCO. When the frequency of the external signal jumps e.g. between 500Hz and 1kHz it takes about 0.1 second until the internal VCO reaches the new frequency (like portamento). So one has to find a compromise between frequency jitter and portamento. But these remarks are valid only for the "ideal" working PLL. As the A-196 is used in a musical environment the "problems" and disadvantages with jitter and slew time lead to additional musical applications like portamento effects, wobbling frequencies or harmonic locking according to the type of frequency comparator and time constant of the PLL low pass filter. Instead of the internal manually controlled low pass filter the voltage controlled slew limiter A-171 can be used to obtain voltage control of this parameter. Normal audio filters (e.g. A-120, A-121) cannot be used for this job as the minimum frequency is to high (down to a few Hz or even less necessary) and the signal has to be DC coupled due to the low frequencies. Audio filters are normally AC coupled.

Another very important application of a PLL is frequency multiplication in combination with an external frequency divider. For this the output of the PLL-VCO is processed through an external frequency divider (e.g. A-163, A-160, A-161, A-115) before it is fed to In1 of the phase comparator. In this case the frequency of the PLL-VCO will be a multiple of the master frequency. E.g. if the A-163 is used and adjusted to dividing factor 5 the frequency of the PLL-VCO will be 5 times the frequency of the master VCO. Consequently, frequency division (A-163) leads to frequency multiplication with the PLL circuit. In combination with the PLL low pass frequency several effects can be realized (frequency multiplication with portamento or wobbling). The frequency multiplication can even be used to drive a graphic VCO. If your graphic VCO e.g. has 8 steps (e.g. A-155) and you use a frequency divider with factor 8 in the PLL feedback the output of the graphic VCO has the same frequency as the master VCO. Another application is the generation of pseudo-harmonics (not real harmonics as only rectangle waves are available) or clock generation for switched-capacitor filters.
Read more
MRP:$89.65 SAVE 18%
 3 in stock $73.62
Click for better price!
or call +44 20 7424 1960
quote 755416
Doepfer A-190-8 USB MIDI To Sync Interface Module Doepfer A-190-8 USB MIDI To Sync Interface Module Doepfer A-190-8 USB MIDI To Sync Interface Module
Cat: 755412 Rel: 13 Nov 19 • View all Synth modules
 
MIDI/USB/CV/Gate interface module - 6HP
Notes: USB/MIDI to clock interface that allows for synchronizing clock-driven modules with the MIDI environment. It processes only the Clock, Start, Stop and Continue MIDI commands. It has several clock divider outputs, each one start, stop and reset outputs for controlling sequencers and also an interesting wait function. Input is either a 5-pin DIN socket or USB.
Read more
 3 in stock $116.92
Doepfer A-190-5 Polyphonic USB MIDI To CV & Gate Interface Module (B-STOCK) Doepfer A-190-5 Polyphonic USB MIDI To CV & Gate Interface Module (B-STOCK) Doepfer A-190-5 Polyphonic USB MIDI To CV & Gate Interface Module (B-STOCK)
Cat: 787268 Rel: 20 Dec 18 • View all Synth modules
 
B-STOCK: Box opened, product in perfect working order
Notes: ***B-STOCK: Box opened, product in perfect working order***


Module A-190-5 is a four voice Midi/USB to CV/Gate interface. For each voice a pitch control voltage (CV1, 1V/octave standard to control VCOs), a gate output (to control envelope generators) and two additional control voltages (CV2, CV3) are available. The two additional CV outputs can be controlled by Midi velocity, volume, modulation, pitch bend, after touch or free assignable Midi controllers.

- Four voice monophonic (i.e. to control four monophonic voices by four succeeding Midi channels)
- Four voice polyphonic (i.e. to control four monophonic voices by one Midi channel) with several sub-modes (e.g. rotating/non-rotating)
- Two voice polyphonic (i.e. to control two monophonic voices by one Midi channel)
- Unisono

The basic mode is selected by means of a momentary switch (probably Mode or Algor.) and is shown in the LC display. Certain parameters of each mode can be edited (e.g. the midi channel(s), the midi reference note for 0V CV, assigned controllers for CV2 and CV3). For this the momentary switch Edit/Play is used. The parameter values (e.g. midi channels) are shown in the display and can be modified by means of the momentary switches 1...4. In Play mode the LEDs of these four switches display the gate states.
Read more
 1 in stock $275.71
Doepfer A-190-3V USB MIDI To CV & Gate Interface Module (vintage edition) Doepfer A-190-3V USB MIDI To CV & Gate Interface Module (vintage edition) Doepfer A-190-3V USB MIDI To CV & Gate Interface Module (vintage edition)
Cat: 755410 Rel: 14 Nov 19 • View all Synth modules
 
Midi/USB-to-CV/Gate interface - 6HP
Notes: Module A-190-3 is a Midi/USB-to-CV/Gate interface that allows the integration of the A-100 system into a USB or Midi environment. It has available 4 analogue control voltage outputs (CV1...4) and one Gate output. A-190-3 is the modular version of Dark Link.

In/Outputs and controls:

- USB
- Midi Input
- Learn button
- Gate Out (with LED for Gate display and learn function), 0/+5V
- CV1: controlled by Midi note messages, 1V/Octave, 0...+5V
- CV2: controlled by Midi pitch bend, ~ -2.5...+2.5V or ~ 0...+5V (can be selected by an internal jumper)
- CV3: controlled by Midi velocity, 0...+5V
- CV4: controlled by Midi control change messages, free assignable controller in learn mode
- Glide control (portamento function for CV1)

Other Features:

- Midi channel, reference note and Midi control change number for CV4 are adjusted by means of a learn button and LED.
- By means of two jumpers CV1 and Gate can be connected to the corresponding lines of the A-100 bus. That way the VCOs A-110 or A-111 and the envelope generator A-140 can be controlled directly via the A-100 bus, i.e. it's not necessary to patch CV and Gate with cables between the front panels. In addition, CV1 is buffered, i.e. even several VCOs can be controlled by the A-190-3 without the need of an additional bus buffer (e.g. A-185-1 or A-185-2).
- The gate voltage can be set to +5V or +12V by means of two jumpers. For modules of the A-100 both voltages can be used. For modules or devices from other manufacturers the gate voltage has to be set accordingly.
- If you want to connect the gate output to devices that use S-Trig a special S-Trig cable is available. For details please refer to our FAQ page
- By means of the precise CV adder A-185-2 CV1 and CV2 can be added to obtain an adjustable width of the pitch bend. For this CV2 of the A-190-3 is connected to the upper input of the A-185-2 which has an attenuator available. CV1 of the - A-190-3 is connected to one of the other inputs without attenuator.
Read more
 2 in stock $126.67
Doepfer A-190-3 USB MIDI To CV & Gate Interface Module Doepfer A-190-3 USB MIDI To CV & Gate Interface Module Doepfer A-190-3 USB MIDI To CV & Gate Interface Module
Cat: 755408 Rel: 14 Nov 19 • View all Synth modules
 
Midi/USB-to-CV/Gate interface - 6HP
Notes: Module A-190-3 is a Midi/USB-to-CV/Gate interface that allows the integration of the A-100 system into a USB or Midi environment. It has available 4 analogue control voltage outputs (CV1...4) and one Gate output. A-190-3 is the modular version of Dark Link.

In/Outputs and controls:

- USB
- Midi Input
- Learn button
- Gate Out (with LED for Gate display and learn function), 0/+5V
- CV1: controlled by Midi note messages, 1V/Octave, 0...+5V
- CV2: controlled by Midi pitch bend, ~ -2.5...+2.5V or ~ 0...+5V (can be selected by an internal jumper)
- CV3: controlled by Midi velocity, 0...+5V
- CV4: controlled by Midi control change messages, free assignable controller in learn mode
- Glide control (portamento function for CV1)

Other Features:

- Midi channel, reference note and Midi control change number for CV4 are adjusted by means of a learn button and LED.
- By means of two jumpers CV1 and Gate can be connected to the corresponding lines of the A-100 bus. That way the VCOs A-110 or A-111 and the envelope generator A-140 can be controlled directly via the A-100 bus, i.e. it's not necessary to patch CV and Gate with cables between the front panels. In addition, CV1 is buffered, i.e. even several VCOs can be controlled by the A-190-3 without the need of an additional bus buffer (e.g. A-185-1 or A-185-2).
- The gate voltage can be set to +5V or +12V by means of two jumpers. For modules of the A-100 both voltages can be used. For modules or devices from other manufacturers the gate voltage has to be set accordingly.
- If you want to connect the gate output to devices that use S-Trig a special S-Trig cable is available. For details please refer to our FAQ page
- By means of the precise CV adder A-185-2 CV1 and CV2 can be added to obtain an adjustable width of the pitch bend. For this CV2 of the A-190-3 is connected to the upper input of the A-185-2 which has an attenuator available. CV1 of the - A-190-3 is connected to one of the other inputs without attenuator.
Read more
! low stock $122.34
Click for better price!
or call +44 20 7424 1960
quote 755408
Doepfer A-189-1 VBM Voltage Controlled Bit Modifier & Bit Cruncher Module (B-STOCK) Doepfer A-189-1 VBM Voltage Controlled Bit Modifier & Bit Cruncher Module (B-STOCK) Doepfer A-189-1 VBM Voltage Controlled Bit Modifier & Bit Cruncher Module (B-STOCK)
Cat: 788795 Rel: 14 Nov 19 • View all Synth modules
 
B-STOCK: Slight surface marks
Notes: ***B-STOCK: Slight surface marks ***


Module A-189-1 is a voltage controlled bit modifier. It offers several voltage controlled algorithmic functions like voltage controlled bit crunching, bit shifting (with/without carry over), bit exchange, rectifying, absolute value and calculating operations like addition, subtraction, multiplication or division.

The module has two control units both with manual control and CV input with attenuator:

- One for the algorithmic function according to the selected mode (e.g. number of shifted bits): BC and BC CV
- One for the sampling rate (SR and SR CV).

The signal input is equipped with an attenuator. As the module is DC coupled even control voltages can be processed.

The mode (e.g. bit crunching, bit shifting, bit exchange) is selected by a 16-position rotary switch.
Read more
 1 in stock $99.94
Doepfer A-189-1 VBM Voltage Controlled Bit Modifier & Bit Cruncher Module Doepfer A-189-1 VBM Voltage Controlled Bit Modifier & Bit Cruncher Module Doepfer A-189-1 VBM Voltage Controlled Bit Modifier & Bit Cruncher Module
Cat: 755405 Rel: 14 Nov 19 • View all Synth modules
 
Voltage controlled bit modifier module for the Eurorack A-100 system
Notes: Module A-189-1 is a voltage controlled bit modifier. It offers several voltage controlled algorithmic functions like voltage controlled bit crunching, bit shifting (with/without carry over), bit exchange, rectifying, absolute value and calculating operations like addition, subtraction, multiplication or division.

The module has two control units both with manual control and CV input with attenuator:

- One for the algorithmic function according to the selected mode (e.g. number of shifted bits): BC and BC CV
- One for the sampling rate (SR and SR CV).

The signal input is equipped with an attenuator. As the module is DC coupled even control voltages can be processed.

The mode (e.g. bit crunching, bit shifting, bit exchange) is selected by a 16-position rotary switch.
Read more
 2 in stock $101.77
Click for better price!
or call +44 20 7424 1960
quote 755405
Doepfer A-188-2 Tapped BBD Delay Module Doepfer A-188-2 Tapped BBD Delay Module Doepfer A-188-2 Tapped BBD Delay Module
Cat: 755403 Rel: 12 Nov 19 • View all Synth modules
 
Bucket brigade delay module - 30HP
Notes: A-188-2 is another module that is based on a so-called Bucket Brigade Device (BBD). If you are not familiar with BBDs please refer to the A-188-1. There you can find some details about this special type of circuits.

The main difference between A-188-1 and A-188-2 is the type of BBD circuit that leads to completely different module principles and sounds. The A-188-1 uses different single BBD chips with one signal input and one signal output only. In contrast the A-188-2 uses as so-called tapped BBD that has available six outputs - the so-called taps after the BBD stages 396, 662, 1194, 1726, 2790 and 3328. In the A-188-2 we use this special BBD circuit (MN3011) to obtain these module features:

The module has available two separate mixing sub-units. For both mixers the levels and polarities of each BBD output can be adjusted to obtain two different mixtures of the BBD outputs. A new type of potentiometers with centre detent and centre terminal is used for the BBD mixing controls to have a better feel for the neutral position. Each mixer has a wet/dry control at its output that allows choosing between the pure input signal (original), the BBD mix or anything in between. The two outputs can be treated as stereo outputs but it is also possible to use one of the outputs for other applications (details in the next paragraph).

The A-188-2 has a feedback section available that is very similar to the one in the A-188-1. But as we now have 6 different BBD outputs available 6 different feedback types are possible. The feedback input socket is normalled to the "396" output (not to "1194" as shown in the scheme, the front panel is correct). But by patching the feedback socket to any of the single output sockets another BBD tap can be used for the feedback to obtain different sounds. Even external feedback processing is possible (e.g. with a VCA for voltage controlled feedback). The feedback control has polarizer function, i.e. the neutral position is at the centre. Left from the centre the feedback signal is subtracted from the input signal, right from the centre it's added (negative/positive feedback). Even for this potentiometer the new version with centre detent is used.

A special feedback can be obtained if one of the mix outputs is used for the feedback function. In this case for each tap the positive or negative feedback share can be adjusted. This leads to multiple peaks and/or notches in the frequency response of the module.

For each tap of the BBD a separate output socket is available. These sockets can be used for changing the feedback loop - as mentioned above -, for voltage controlled mixing of the taps - e.g. with the voltage controlled mixer A-135 or other applications that require access to each single tap.

The A-188-2 uses the same high speed VCO (HSVCO) for the BBD clock as the A-188-1. The clock and consequently the delay time can be controlled manually (delay control) and by the two control voltage inputs CV1 and CV2. The sensitivity of CV1 is approximately 1V/oct. CV2 is equipped with a polarizer (a new type of potentiometers with centre detent). The HSVCO has a clock output available that is normalled to the clock input socket. These sockets can be used to link different BBD modules and to run them with the same clock. But even other applications with frequency dividers (e.g. A-163) or PLL (e.g. A-196) are conceivable. A voltage composed of the manual delay control, CV1 and CV2 is available at the CV out socket, e.g. to control an external clock suppression filter as the A-188-2 is not equipped with such a filter (same as for the A-188-1).
Read more
 1 in stock $226.29
Click for better price!
or call +44 20 7424 1960
quote 755403
Doepfer A-188-1YV 256 Stages BBD Delay Module (vintage edition)
Cat: 755391 Rel: 13 Nov 19 • View all Synth modules
 
Analogue delay module - 14HP
Notes: The A-188-1 series bases on a co-called bucket brigade device (BBD) that has been used in the pseudo-digital BBD-delays.

The version with 256 stages provides a delay time of 0.51 - 256ms and is great for Karpluss-Strong synthesis.

The module is not an entire delay but only its core with all anomalies (e.g. cross talk of the internal clock frequency), and its very independent spacey and raw sound.

There are modulation possibilities with invertible polaritiy, a dry/wet control, feedback up to self-oscillation and a feedback loop with insert.
Read more
 1 in stock $161.33
Click for better price!
or call +44 20 7424 1960
quote 755391
Doepfer A-188-1Y 256 Stages BBD Delay Module
Cat: 755390 Rel: 13 Nov 19 • View all Synth modules
 
Analogue delay module - 14HP
Notes: The A-188-1 series bases on a co-called bucket brigade device (BBD) that has been used in the pseudo-digital BBD-delays.

The version with 256 stages provides a delay time of 0.51 - 256ms and is great for Karpluss-Strong synthesis.

The module is not an entire delay but only its core with all anomalies (e.g. cross talk of the internal clock frequency), and its very independent spacey and raw sound.

There are modulation possibilities with invertible polaritiy, a dry/wet control, feedback up to self-oscillation and a feedback loop with insert.
Read more
 1 in stock $146.16
Click for better price!
or call +44 20 7424 1960
quote 755390
Doepfer A-188-1XV 128 Stages BBD Delay Module (vintage edition) Doepfer A-188-1XV 128 Stages BBD Delay Module (vintage edition) Doepfer A-188-1XV 128 Stages BBD Delay Module (vintage edition)
Cat: 755389 Rel: 13 Nov 19 • View all Synth modules
 
Analogue delay module - 14HP
Notes: The A-188-1 series bases on a so-called bucket brigade device (BBD) that has been used in the pseudo-digital BBD-delays.

The version with 128 stages provides a delay time of 0.26 - 128ms and is great for Karpluss-Strong synthesis.

The module is not an entire delay but only its core with all anomalies (e.g. cross talk of the internal clock frequency), and its very independent spacey and raw sound.

There are modulation possibilities with invertible polaritiy, a dry/wet control, feedback up to self-oscillation and a feedback loop with insert.
Read more
 1 in stock $139.67
Doepfer A-188-1X 128 Stages BBD Delay Module Doepfer A-188-1X 128 Stages BBD Delay Module Doepfer A-188-1X 128 Stages BBD Delay Module
Cat: 755388 Rel: 13 Nov 19 • View all Synth modules
 
Analogue delay module - 14HP
Notes: The A-188-1 series bases on a so-called bucket brigade device (BBD) that has been used in the pseudo-digital BBD-delays.

The version with 128 stages provides a delay time of 0.26 - 128ms and is great for Karpluss-Strong synthesis.

The module is not an entire delay but only its core with all anomalies (e.g. cross talk of the internal clock frequency), and its very independent spacey and raw sound.

There are modulation possibilities with invertible polaritiy, a dry/wet control, feedback up to self-oscillation and a feedback loop with insert.
Read more
 1 in stock $128.85
Doepfer A-188-1V BBD Delay Module (vintage edition)
Cat: 755402 Rel: 15 Nov 19 • View all Synth modules
 
Bucket Brigade Device module, 0 Stages - 14HP
Notes: Module A-188-1 is a so-called Bucket Brigade Device module.

BBDs have been used to delay audio signals before digital delays dethroned the BBD based effect units. But BBDs have some very unique advantages (or disadvantages dependent on the point of view) over the digital counterpart which result from the special properties of the BBDs. BBD circuits can be treated as a chain of Sample&Hold units (S&H) which pass on their voltages to the next S&H in the chain at each clock pulse.

In any case the sounds generated by module A-188-1 are very special. Typical applications are: Flanger, Chorus, Analog Delay or Karplus/Strong synthesis. But as the A-188-1 has a lot of very unique features (voltage controlled clock rate / delay time with extreme range, polarity switches for the CV inputs, feedback and BBD out/mix, clock and CV output of the high speed VCO, BBD clock input, feedback insert, feedback up to self-oscillation) a lot of unusual applications can be realized with the module (e.g. delay controlled by ADSR, envelope, random or sequencer with positive or negative effect).

The A-188-1 also has no built-in anti-aliasing filter in order not to limit the possibilities of the module. For this the CV out is intended.

This module comes without BBD circuit. The final adjustment is possible only with the BBD circuit used in the module. Electronic experience and measuring equipment (digital multi-meter, oscilloscope, frequency meter) are required.
Read more
 4 in stock $128.85
Click for better price!
or call +44 20 7424 1960
quote 755402
Doepfer A-188-1D 4096 Stages BBD Delay Module Doepfer A-188-1D 4096 Stages BBD Delay Module Doepfer A-188-1D 4096 Stages BBD Delay Module
Cat: 755398 Rel: 13 Nov 19 • View all Synth modules
 
Analogue delay module - 14HP
Notes: The A-188-1 series bases on a so-called bucket brigade device (BBD) that has been used in the pseudo-digital BBD-delays.

The version with 4096 stages provides a delay time of 8.19 - 4096 ms.

The module is not an entire delay but only its core with all anomalies (e.g. cross talk of the internal clock frequency), and its very independent spacey and raw sound.

There are modulation possibilities with invertible polaritiy, a dry/wet control, feedback up to self-oscillation and a feedback loop with insert.
Read more
 1 in stock $155.90
Click for better price!
or call +44 20 7424 1960
quote 755398
Doepfer A-188-1CV 2048 Stages BBD Delay Module (vintage edition) Doepfer A-188-1CV 2048 Stages BBD Delay Module (vintage edition) Doepfer A-188-1CV 2048 Stages BBD Delay Module (vintage edition)
Cat: 755397 Rel: 13 Nov 19 • View all Synth modules
 
Analogue delay module - 14HP
Notes: The A-188-1 series bases on a so-called bucket brigade device (BBD) that has been used in the pseudo-digital delays of the 1980s.

The version with 2048 stages provides a delay time range of 4.10 - 2048ms.

The module is not an entire delay but only its core with all anomalies (e.g. cross talk of the internal clock frequency), and its very independent spacey and raw sound.

There are modulation possibilities with invertible polaritiy, a dry/wet control, feedback up to self-oscillation and a feedback loop with insert.
Read more
 1 in stock $128.85
Click for better price!
or call +44 20 7424 1960
quote 755397
Doepfer A-188-1C 2048 Stages BBD Delay Module Doepfer A-188-1C 2048 Stages BBD Delay Module Doepfer A-188-1C 2048 Stages BBD Delay Module
Cat: 755396 Rel: 13 Nov 19 • View all Synth modules
 
Analogue delay module - 14HP
Notes: The A-188-1 series bases on a so-called bucket brigade device (BBD) that has been used in the pseudo-digital delays of the 1980s.

The version with 2048 stages provides a delay time range of 4.10 - 2048ms.

The module is not an entire delay but only its core with all anomalies (e.g. cross talk of the internal clock frequency), and its very independent spacey and raw sound.

There are modulation possibilities with invertible polaritiy, a dry/wet control, feedback up to self-oscillation and a feedback loop with insert.
Read more
 2 in stock $110.44
Doepfer A-188-1A 512 Stages BBD Delay Module Doepfer A-188-1A 512 Stages BBD Delay Module Doepfer A-188-1A 512 Stages BBD Delay Module
Cat: 755392 Rel: 13 Nov 19 • View all Synth modules
 
Analogue delay module - 14HP
Notes: The A-188-1 series bases on a so-called bucket brigade device (BBD) that has been used in the pseudo-digital delays of the 1980s.

The version with 512 stages provides a delay time of 1.02 - 512 ms.

The module is not an entire delay but only its core with all anomalies (e.g. cross talk of the internal clock frequency), and its very independent spacey and raw sound.

There are modulation possibilities with invertible polaritiy, a dry/wet control, feedback up to self-oscillation and a feedback loop with insert.
Read more
 1 in stock $139.67
Doepfer A-185-2v Precision Control Voltage Adder & Buffer Module (vintage edition) Doepfer A-185-2v Precision Control Voltage Adder & Buffer Module (vintage edition) Doepfer A-185-2v Precision Control Voltage Adder & Buffer Module (vintage edition)
Cat: 751764 Rel: 23 Oct 19 • View all Synth modules
 
Precision adder (mixer) and buffer for control voltages - 6HP
Notes: Module A-185-2 is a precision control voltage adder/buffer. Precision means that the amplification of the inputs without attenuators is exactly 1.00 and is suitable to add control voltages for the pitch control of VCOs (e.g. from keyboard + sequencer 1 + sequencer 2). Summing resistors matched to 0.1% are used to obtain an accuracy of 0.1% for the added voltages.

The module is equipped with four CV inputs: one with attenuator and three without attenuator. Each input is normalled to +1 V (i.e. if no plug is inserted the input contributes 1 V to the sum appearing at the output).

The input with attenuator can be used for common modulations (e.g. from an LFO, ADSR, Theremin, Pitch-Bender) for all VCOs connected to the output. The Lev.1 control is used to adjust the depth of the modulation, the first switch selects the polarity of the modulation. If no signal is connected to the first socket the attenuator works as a (fine) tuning knob because a voltage in the range 0...+1V (right position of the switch) or 0...-1V (left position of the switch) is added to the CV output.

The inputs without attenuators are planned to add control voltages coming out of keyboards, sequencers, Midi-to-CV interfaces, ribbon controllers or other CV sources that follow the 1V/oct standard. For example the CV of a keyboard can be used to transpose the CV coming from a sequencer, or the CV of a slow sequencer can be used to transpose the CV from a fast sequencer.

Each input is equipped with a three-position switch that determines if the corresponding voltage is added (right position), subtracted (left position) or if the input has no effect (centre position). If no plug is inserted the corresponding switch works as an octave switch for the lower three sections as the default 1 V are added or subtracted to the output voltage according to the switch position. The first switch can be used to add a variable voltage to the sum output. The variable voltage is adjusted with the Lev.1 control and the knob works then as kind of a (fine) tuning control.

The module is equipped with 4 outputs: three non-inverting and one inverting ouput. An internal jumper can be used to connect the non-inverted or inverted output to the CV line of the A-100 bus. That way the module can used to control several VCOs that are connected to the same bus board as the A-185-2 (same functionality as A-185-1).
Read more
MRP:$100.05 SAVE 23%
 More than 10 in stock $76.87
Click for better price!
or call +44 20 7424 1960
quote 751764
Doepfer A-185-2 Precision Control Voltage Adder & Buffer Module Doepfer A-185-2 Precision Control Voltage Adder & Buffer Module Doepfer A-185-2 Precision Control Voltage Adder & Buffer Module
Cat: 751763 Rel: 23 Oct 19 • View all Synth modules
 
Precision adder (mixer) and buffer for control voltages - 6HP
Notes: Module A-185-2 is a precision control voltage adder/buffer. Precision means that the amplification of the inputs without attenuators is exactly 1.00 and is suitable to add control voltages for the pitch control of VCOs (e.g. from keyboard + sequencer 1 + sequencer 2). Summing resistors matched to 0.1% are used to obtain an accuracy of 0.1% for the added voltages.

The module is equipped with four CV inputs: one with attenuator and three without attenuator. Each input is normalled to +1 V (i.e. if no plug is inserted the input contributes 1 V to the sum appearing at the output).

The input with attenuator can be used for common modulations (e.g. from an LFO, ADSR, Theremin, Pitch-Bender) for all VCOs connected to the output. The Lev.1 control is used to adjust the depth of the modulation, the first switch selects the polarity of the modulation. If no signal is connected to the first socket the attenuator works as a (fine) tuning knob because a voltage in the range 0...+1V (right position of the switch) or 0...-1V (left position of the switch) is added to the CV output.

The inputs without attenuators are planned to add control voltages coming out of keyboards, sequencers, Midi-to-CV interfaces, ribbon controllers or other CV sources that follow the 1V/oct standard. For example the CV of a keyboard can be used to transpose the CV coming from a sequencer, or the CV of a slow sequencer can be used to transpose the CV from a fast sequencer.

Each input is equipped with a three-position switch that determines if the corresponding voltage is added (right position), subtracted (left position) or if the input has no effect (centre position). If no plug is inserted the corresponding switch works as an octave switch for the lower three sections as the default 1 V are added or subtracted to the output voltage according to the switch position. The first switch can be used to add a variable voltage to the sum output. The variable voltage is adjusted with the Lev.1 control and the knob works then as kind of a (fine) tuning control.

The module is equipped with 4 outputs: three non-inverting and one inverting ouput. An internal jumper can be used to connect the non-inverted or inverted output to the CV line of the A-100 bus. That way the module can used to control several VCOs that are connected to the same bus board as the A-185-2 (same functionality as A-185-1).
Read more
MRP:$87.05 SAVE 18%
 5 in stock $71.45
Click for better price!
or call +44 20 7424 1960
quote 751763
Doepfer A-184-1v Ring Modulator, Sample & Hold, Track & Hold, & Slew Limiter Module (vintage edition) Doepfer A-184-1v Ring Modulator, Sample & Hold, Track & Hold, & Slew Limiter Module (vintage edition) Doepfer A-184-1v Ring Modulator, Sample & Hold, Track & Hold, & Slew Limiter Module (vintage edition)
Cat: 751757 Rel: 23 Oct 19 • View all Synth modules
 
4HP Eurorack module featuring a combination of 3 functions
Notes: Module A-184-1 is the combination of three functions:

- Ring Modulator
- Sample&Hold/Track&Hold unit
- Slew Limiter

The same functions are actually already available in other modules (e.g. A-114, A-148, A-170). But in many systems it's not necessary to have two ring modulators (A-114) or two S&H units (A-148) or two slew limiters (A-170) available. That's why we have compiled these function in one small 4 HP module.

The upper section is nothing but half of an A-114, i.e. a ring modulator with the usual X/Y inputs and the X*Y output. Inputs and outputs of this sub-unit are AC coupled, i.e. suitable only for audio signals. A detailed explanation of a ring modulator can be found on the A-114 info page.

The lower section is a Sample & Hold (S&H) / Track & Hold (T&H) unit (same as half of an A-148) followed by a slew limiter (same as the upper section the A-170). A toggle switch is used to set the mode to S&H or T&H. In S&H mode the unit picks out a sample from the voltage at the SH input at the rising edge of the trigger signal input. In T&H mode the output follows the input voltage as long as the level of the trigger signal is high. As soon as the trigger signal turns low, the last voltage is stored. The trigger input is internally normalled to high, i.e. the unit works just as a slew limiter in T&H mode when no trigger signal is applied.
Read more
 1 in stock $106.10
Click for better price!
or call +44 20 7424 1960
quote 751757
Doepfer A-183-9 Quad USB Power Supply Module Doepfer A-183-9 Quad USB Power Supply Module Doepfer A-183-9 Quad USB Power Supply Module
Cat: 711015 Rel: 29 Nov 18 • View all Synth modules
 
Simple power supply for up to four devices - 2HP
Notes: Module A-183-9 is a simple power supply for up to four devices which can be powered via USB (e.g. keyboards, smartphones). An LED shows is the +5V are present.

The module has no USB function but provides only the +5V supply for USB devices.

A control LED shows if the +5V are present.

Note: The module requires an A-100 case with built in power supply A-100PSU3. Only this A-100 supply has the required +5V available. We do not recommend the usage of an older A-100 case with A-100PSU2 as this would require the +5V adapter A-100AD5 and the max. current would be limited to 100mA.
Read more
MRP:$55.87
 7 in stock $54.13
Click for better price!
or call +44 20 7424 1960
quote 711015
Doepfer A-183-4 Quad Level Shifter Module
Cat: 765895 Rel: 28 Jul 20 • View all Synth modules
 
Level shifter module
Notes: Module A-183-4 is a fourfold level shifter. A level shifter is required if the level of a digital control signal has to be increased or decreased. A typical application is the conversion of a gate, trigger or clock signal with +5V voltage level (tolerance range +2...+5V) to +12 voltage level. The output voltage level can be set by means of a jumper to +12V or +5V. The factory setting is +12V. But it can be changed to convert also a higher to a lower level (e.g. +12V to +5V). But this application is required rarely. The output level setting by means of the jumper is global, i.e. it is valid for all four units and cannot be set individually for each unit. The four output signals are displayed by means of LEDs.

The outputs and inputs of the four sub-units are normalled via the switching contacts of the input sockets, i.e. the output signal of the upper unit is used as input signal of the unit below provided that no patch cable is inserted into the input socket of the lower unit. That way the module can be used also as clock/trigger/gate buffer or buffered multiple for digital signals. For this the signal that has to be buffered is connected to input 1. The buffered (and possible level shifted) signal appears then at all four outputs.
Voltage thresholds for the input voltages:
voltages below +0,8 V are treated as "low"
voltages above +3 V are treated as "high"

Typical applications:

Converting the levels of digital control signals (e.g. gate, trigger, clock) to another voltage level (+12V or +5V)
buffering and duplicating digital control signals (e.g. gate, trigger, clock)

Important note: the module cannot be used for analog signals.
Read more
MRP:$70.16 SAVE 15%
 4 in stock $59.55
Click for better price!
or call +44 20 7424 1960
quote 765895
Doepfer A-183-3 Amplifier Module Doepfer A-183-3 Amplifier Module Doepfer A-183-3 Amplifier Module
Cat: 751740 Rel: 23 Oct 19 • View all Synth modules
 
DC coupled amplifier - 4HP
Notes: Module A-183-3 is a simple amplifier. It is DC coupled and can be used for both CV and audio signals. The maximal amplification can be switched between 1, 2 and 4 (in position 1 the module does not work as a real amplifier but only as attenuator). The level can be adjusted by means of the Level control between zero and the chosen maximum amplification (1/2/4). Two overload LEDs indicate if the output signal goes beyond about +10V or becomes less than about -10V. Input and output are equipped with miniature 2-fold multiples (nothing but 2 connected sockets).

The main application of this module is to adapt differing audio or CV levels between different modules or systems. For example, LFO, ADSR or Gate levels between modules of different manufacturers can be increased or attenuated. But even audio signals can be attenuated or amplified up to 4. But the module cannot be used as an amplifier for external low level audio signals (e.g. microphones or electric guitars)!
Read more
MRP:$53.27 SAVE 15%
 3 in stock $45.46
Click for better price!
or call +44 20 7424 1960
quote 751740
Doepfer A-183-2 Voltage Offset Generator & Attenuator/Polarizer Module Doepfer A-183-2 Voltage Offset Generator & Attenuator/Polarizer Module Doepfer A-183-2 Voltage Offset Generator & Attenuator/Polarizer Module
Cat: 751731 Rel: 23 Oct 19 • View all Synth modules
 
Compact module for attenuating control voltage signals - 4HP
Notes: Module A-183-2 is a voltage offset generator combined with an attenuator/polarizer.

This is how the A-183-2 works: At the two output sockets (simply two connected sockets) appears a DC voltage that is adjusted with the Offset control in the range 0...+5V or -5V...+5V. An internal jumper is used to select the offset range (0...+5V or -5V...+5V). Other ranges are possible by changing a resistor on the pc board (e.g. 0...+10V or -10V...+10V). The DC voltage generated by the Offset control is overlaid by the attenuated voltage that is fed to the In socket. The function of the attenuator control can be set to Attenuator or Polarizer by means of a toggle switch. When the switch is in the Attenuator position the control works as an usual attenuator, i.e. zero level at the fully CCW position and max. level and the fully CW position. When the switch is in the Polarizer position the control works as a polarizer, i.e. zero level appears at the centre position. Right from the centre position the In signal is added to the offset voltage, left from the centre position the In signal is subtracted from the offset voltage. In other words: at the fully CW position the non-inverted In signal is added with the full level to the offset voltage, at the fully CCW position the inverted In signal is added with the full level to the offset voltage.

The amplification range for the input is about 0...+1 in the attenuator mode, and -1...+1 in the polarizer mode. The amplification range can be modified by replacing a resistor by another value.

Applications:

Generation of adjustable DC voltages overlaid by control voltages with adjustable level and polarity to control other modules that do not have attenuators or offset controls, e.g. Sampler A-112 (mainly for the wavetable mode), dual VCA A-132-1, VCLFO A-147-2 for waveshaping and ring modulator applications, Quantizer A-156, Theremin A-178, CV-to-Midi interface A-192 and modules of other manufacturers).
Read more
 3 in stock $46.55
Click for better price!
or call +44 20 7424 1960
quote 751731
Doepfer A-183-1 Dual Attenuator Module Doepfer A-183-1 Dual Attenuator Module Doepfer A-183-1 Dual Attenuator Module
Cat: 751728 Rel: 23 Oct 19 • View all Synth modules
 
Dual passive attenuator - 4HP
Notes: Module A-183-1 is a simple passive dual attenuator. Passive means, that each unit is made of two sockets and a 50k linear potentiometer only. There are no active parts like amplifiers or buffers and no power supply is required.

This is how the A-183-1 works: At the output socket appears the attenuated input signal, i.e. zero level at the fully CCW position and max. level and the fully CW position.

Applications:

Adjustable level of CV or audio signals to control other modules that do not have attenuators (e.g. Dual VCA A-132-1, Quantizer A-156, CV-to-Midi interface A-192 and modules of other manufacturers).
Read more
 2 in stock $41.14
Click for better price!
or call +44 20 7424 1960
quote 751728
Doepfer A-182-2 Quad Switch Module
Cat: 731951 Rel: 11 Jun 19 • View all Synth modules
 
Quad passive switch - 4HP
Notes: A-182-2 is a simple passive module that contains four changeover switches, which are used to connect or disconnect the sockets of the corresponding socket triplet:

- In the upper position of the switch the upper socket of the corresponding socket triplet is connected to the centre socket
- In the lower position of the switch the lower socket of the corresponding socket triplet is connected to the centre socket
- In the centre position of the switch the sockets are not connected

Each unit of the module can be used to switch between two signals or to interrupt/connect a signal. In the last case the third socket of the triplet is not used.

The module is fully passive and both audio or control signals can be switched.
Read more
MRP:$67.56
 3 in stock $63.87
Click for better price!
or call +44 20 7424 1960
quote 731951
Doepfer A-182-1 Switched Multiples Module Doepfer A-182-1 Switched Multiples Module Doepfer A-182-1 Switched Multiples Module
Cat: 751724 Rel: 23 Oct 19 • View all Synth modules
 
Eurorack passive multi-connector - 6HP
Notes: Module A-182-1 is a simple passive multi-connector similar to the multiples modules A-180-1/A-180-2. In contrast to modules A-180-1/2 each socket is equipped with a 3-position switch that allows to connect the corresponding socket to the internal bus #1 (left position), bus #2 (right position) or to turn the socket off (centre position).

Examples:

- All switches in left position or all switches in right position: 8-fold multiple

- Four switches in left position and four switches in right position: two 4-fold multiple

- X switches in left position, Y switches in right position and Z switches in centre position: two separate multiples with some sockets turned off
Read more
MRP:$63.67 SAVE 10%
 9 in stock $57.38
Click for better price!
or call +44 20 7424 1960
quote 751724
Doepfer A-181 Multiples 2 Module Doepfer A-181 Multiples 2 Module Doepfer A-181 Multiples 2 Module
Cat: 751722 Rel: 23 Oct 19 • View all Synth modules
 
Two multiples with one 1/4 jack socket & two 3.5mm jack sockets each
Notes: Doepfer's A-181 Multiples 2 is a simple multiple and cable format converter, suitable for translating 1/4" signals to 1/8" and vice versa. The upper mult is wired for monophonic signals, while the lower mult features a 1/4" stereo connector which offers direct 1/8" connection to the tip and ring, respectively, allowing use as a stereo splitter or dual 1/8" to stereo 1/4" converter.
Read more
 1 in stock $51.96
Click for better price!
or call +44 20 7424 1960
quote 751722
Doepfer A-180-9 Multicore Module Doepfer A-180-9 Multicore Module Doepfer A-180-9 Multicore Module Doepfer A-180-9 Multicore Module
Cat: 671561 Rel: 18 Dec 17 • View all Synth modules
 
Pair of multicore signal connectors
Notes: A-180-9 is another simple but useful tool. It can be used to connect up to 14 signals between different cases by means of standard network cables (RJ45). These cables are available all over world smoothly in different lengths and colours. From the factory two black network cables with 0.5 m length are enclosed.

The upper network connector is wired to the eight sockets 1-8, the lower to the six sockets A-F. That way it's possible to pre-patch different cases and connect signals, that are required in all cases (e.g. clock, start/stop, master CV) by means of one or two cables only instead of 14 individual patch cables. When only eight signals are required only the upper network connector is required and the sockets 1-8 are used. When more than eight signals have to be patched both network connectors have to be used. It's also possible to wire the upper and lower network to different cases (i.e. signals 1-8 to external case #1 and signals A-F to external case#2).

The module is fully passive (no power supply required) and simply wires the 14 sockets to 14 pins of the network connectors.

The A-180-9 comes in pairs for combining two modular systems.
Read more
MRP:$124.73 SAVE 13%
 1 in stock $108.27
Click for better price!
or call +44 20 7424 1960
quote 671561
Doepfer A-180-3 Dual Buffered Multiple Module Doepfer A-180-3 Dual Buffered Multiple Module Doepfer A-180-3 Dual Buffered Multiple Module
Cat: 751720 Rel: 23 Oct 19 • View all Synth modules
 
Dual buffered 1-in-3 multiple module - 4HP
Notes: Module A-180-3 is a dual buffered 1-in-3 multiple. The signal applied to the input socket appears as a buffered signal at the three output sockets. Each output has its own buffer, i.e. the three output sockets are not simply connected to each other. The lower output of the upper unit is normalled in the factory to the input of the lower unit. That way the module works as a single 1-in-6 buffered multiple provided that no signal is applied to the input of the lower unit. But it's also possible to pick-up the bus CV and normalize the input socket of the lower unit to the bus CV.

Application: copying/buffering of CV, gate and audio signals.
Read more
 4 in stock $47.63
Click for better price!
or call +44 20 7424 1960
quote 751720
Doepfer A-180-2v Multiples Module (vintage edition) Doepfer A-180-2v Multiples Module (vintage edition) Doepfer A-180-2v Multiples Module (vintage edition)
Cat: 751717 Rel: 23 Oct 19 • View all Synth modules
 
Passive multi-port distributor - 2HP
Notes: 2HP narrow version of the A-180 multiples module. It is a passive signal splitter suitable for audio or CVs. Two sets of four jacks are interconnected, by placing a solder bridge you can connect all eight jacks.
Read more
MRP:$48.07 SAVE 25%
 4 in stock $36.19
Doepfer A-180-2 Multiples Module
Cat: 577779 Rel: 14 Jun 19 • View all Synth modules
 
Passive multi-port distributor - 2HP
Notes: 2HP narrow version of the A-180 multiples module. It is a passive signal splitter suitable for audio or CVs. Two sets of four jacks are interconnected, by placing a solder bridge you can connect all eight jacks.
Read more
 4 in stock $31.13
Doepfer A-178 Theremin Control Voltage Source Module Doepfer A-178 Theremin Control Voltage Source Module Doepfer A-178 Theremin Control Voltage Source Module Doepfer A-178 Theremin Control Voltage Source Module Doepfer A-178 Theremin Control Voltage Source Module
Cat: 751716 Rel: 23 Oct 19 • View all Synth modules
 
Theremin controller module - 8HP
Notes: Theremin module for generating a variable control voltage by approaching/removing hand to/from an antenna. The distance range is about 30-40 cm. Additionally the module is equipped with a Gate output with adjustable threshold level. Controls/Inputs/Outputs: antenna input, offset (knob for zero adjust), 2 x CV out, 2 x LED (for CV control positive/negative and zero offset adjust).

To simulate the original Theremin two A-178, a VCO (e.g. A-110) and a linear VCA (e.g. A-130 or A-132) are required. But of course the A-178 can be used to control other functions in the A-100 (e.g. filter frequency, modulation depth and/or speed, tempo, attack/decay time and so on).

The CV output voltage of the A-178 can range - according to the setting of the front panel controls - from -10V...+10V. The gate output switches from 0V to about +10V.

Applications:

- Controlling any voltage controlled parameter of the A-100, e.g. pitch or pulsewidth (VCO A-110), loudness (VCA A-130/131/132), panorama (A-134), filter frequency or resonance (A-120/121/122/123), phasing (A-125), frequency shift (A-126), resonance peaks (A-127), envelope parameters (A-141/142), tempo (A-147)

- Triggering of A-100 activities via gate with adjustable threshold, e.g. starting an envelope (A-140/141/142), Start/Stop of a sequence (A-155), any switching function (A-150/151)

- Conversion into MIDI control change messages is possible with the A-192.

If two or more A-178 are used the distance between the modules/antennas should be at least 40-50 cm. Otherwise the antennas may affect each other.
Read more
MRP:$118.24 SAVE 14%
 2 in stock $101.77
Click for better price!
or call +44 20 7424 1960
quote 751716
Items 1 to 50 of 181 on page 1 of 4
1  2  3  4  »

Filter

Saved Searches
Save current search
Release Date
Close