Search dance music

Notes: Expand the lid from your case to be another powered rack. This set includes:

Rails
Handle and handle supports
Powered bus board
Case wiring
AC/DC power adapter
All hardware and thermal tape to complete the conversion

Notes: LOCUTUS is designed to interface Assimil8or with MIDI instruments, controllers, and sequencers to provide multichannel modulation and new polyphonic possibilities.

LOCUTUS includes a special attached cable to connect to the Assimil8or CPU behind the panel.

LOCUTUS is 6 HP wide and 25mm deep.

MIDI sources connected to LOCUTUS’ MIDI IN port can be used to modulate Assimil8or parameters using velocity, channel pressure, and MIDI CC (Continuous Controller) messages, select presets using MIDI Program Change (PC) messages, and/or optionally trigger Assimil8or channels with MIDI notes using user-selectable assignment modes. MIDI Setups can be configured with assignment modes including Dynamic, which intelligently cycles through Assimil8or’s channels to easily create polyphonic patches, Multi assignment modes ideal for playing multitimbral Assimil8or patches with MIDI sequencers, SP-1200 modes designed especially for triggering Assimil8or with SP-1200’s MIDI output, and more.

Locutus’ MIDI OUT port can be used to optionally transmit program messages when presets are changed and/or to send MIDI CC data based on the analog control voltages patched to Assimil8or’s 24 CV inputs. Using the new CV-to-MIDI options, Assimil8or and Locutus can be configured to control and modulate MIDI equipment using a eurorack modular system.

Notes: The Dual Stereo Gate (DXG) music synthesizer module is a Dual Stereo Low Pass Gate and Mixer. It follows in the footsteps of the QMMG, Optomix, RxMx, DynaMix, and LxD. Unlike its predecessors, the DXG is specifically oriented around mixing stereo signals, making it an important addition to any system containing modules like XPO, QPAS, Morphagene, Mimeophon, and other stereo modules by Make Noise or others.

Unique to the DXG is a new low pass gate circuit that does not use vactrols. This circuit is 100% analogue and its response was arrived at after many months tailoring it to meet or exceed the expectations that have been set by all the vactrol low pass gates that Make Noise has created over the years.

In the past, Make Noise produced the Dynamix module and Dynamics circuit in the 0-COAST, both of which are vactrolless LPGs; however, the DXG is a completely new approach which better implements the gentle single pole filtering of a low pass gate, while also emulating the slow decay and memory of the vactrol based low pass gate. This new circuit makes possible the consistency of response necessary for versatile stereo use, while also keeping the module small and affordable so that it can be a key part of just about any modular system.

As on all of Make Noise's low pass gates, the DXG's Control parameter is used to set both the amplitude and the frequency content of the sound that passes through it. The control parameter tends to open faster than it closes, imparting a subtle decay phase onto any envelope shape that is used to modulate it.

Unlike previous low pass gates made by Make Noise, all the DXG's inputs and outputs are stereo. Each set of inputs is normalled so that the left input can be used for a mono signal, sending a copy to both left and right outputs. The Auxiliary inputs are also a stereo pair with mono normalization. These normalizations allow for the DXG to be used as a simple three channel stereo mixer, with one or two of the channels additionally being used for dynamics control and note event generation. The Aux inputs can be used to chain together larger decentralized mixes using additional DXG modules, or X-PAN, Optomix, modDemix etc.

Features

- Make Noise's first Stereo Low Pass Gate

- Vactrol-free design for classic Low Pass Gate sounds, but with the balance and consistency needed for true Stereo

- Fully Stereo i/o for easy integration into a Stereo-equipped modular synthesizer

- All Left inputs normalled for easy use with Mono signals

- STRIKE Input allows use of Gate signal to trigger Low Pass Gate circuit, creating "plucking" or "pinging" sound from any Gate

- Summing stage with Stereo AUXiliary IN allows for chaining of multiple units, creating larger mixes

- Part of a decentralized mix console integrated throughout the system along with X-PAN, Optomix, XOH, etc.

- Pairs well with XPO, QPAS, Morphagene, Mimeophon, Spectraphon etc.

Width: 8hp
Power:
74mA @ +12V
86mA @ -12V
Module Depth (incl power cable): 43mm

Notes: HI POWER is Crazy Tube Circuits' next endeavour in pedal + amp-in-a-box overdrives recreating legendary sounds, following the success of Crossfire and Unobtanium.

It was inspired by the sonic combination of two British tone machines. The almighty Colorsound Power Boost meets the blistering high-headroom Hiwatt amp.

While the combination of these two units directly hints at the gear setup of David Gilmour and especially the gear used on Pink Floyd's album: Wish You Were Here (think the guitar solo sounds of "Shine on you Crazy Diamond", "Have A Cigar") the sonic options are endless.

The orange enclosure silicon transistor circuit (Colorsound Power Boost) can deliver from a transparent clean boost to an all-out fuzz driving a tube amp to sonic bliss. Crazy Tube Circuits set out to clone the original unit featuring the true-to-the-original spec BC184 transistors running on 18V DC (via an internal voltage booster circuit).

The ultra-flexible 2-band Baxandall EQ circuit can add bite and low-end rumble to any setup. Crazy Tube Circuits used a reverse log gain pot (labelled as volume), compared to the linear taper pot found in the original units and acted as an on/off switch, to be able to set the amount of boost/overdrive more precisely. While the earlier units didn't feature a master volume control (only as an aftermarket mod - Pete Cornish made an external unit master volume for David Gilmour's Power Boost) Crazy Tube Circuits chose to include one that is setup in a way so that when it is all the way clockwise it is bypassed. Later versions of the Power Boost had 9V power supply and were renamed as the "Overdriver" due to the lower headroom and their ability to drive the signal earlier. They were offered in a grey enclosure and can be seen in the gear setups of Jeff Beck, Marc Bolan, etc. Crazy Tube Circuits chose to incorporate this version as well with a flip of a toggle switch (PWR-ODR toggle switch).

On the left side of the HI POWER you will find an all-analogue circuit set out to emulate the sound and feel of a Hiwatt amp. Following the path of the famed British tube amplifier, this circuit offers authentic amp tone and feel resembling guitar tones from guitar greats like David Gilmour, Pete Townsend, Jimmy Page, Noel Gallagher to name a few. From the big bold high-headroom clean sounds to the face-melting crunchy tones.

True to the last detail, Crazy Tube Circuits have included the full EQ section along with a presence control located at the negative feedback of the power amp simulation circuit. A headroom toggle switch selects between the high headroom 100w power section provided by a quartet of EL34s (think Hiwat DR103), or the lower headroom and compression provided by a 50W power section with a pair of EL34s when hit hard (think DR504). Similar in operation to the original amps the master volume was designed to produce more gain at higher settings.

Crazy Tube Circuits taken the design a step further by adding a switch to select between input channels of the amplifier. You can select between the full response of the normal channel of the amplifier, the increased presence and tight low end of the bright channel input or the "Gilmour-ish" enhanced frequency response and added gain of those inputs linked together. This follows the modifications that Pete Cornish did to all David Gilmour's Hiwatt amps.

Like their other dual overdrive/amp-in-a-box designs, Crazy Tube Circuits also included a passive effects loop to give you the option to connect your beloved pedals between your booster/overdrive and amp in a box or use the two sections as separate and independent effects when using an external bypass switcher/looper. Gilmour enthusiasts will love to insert their Big Muff, Tube Driver and Phase 90 in there. Note that all pedals inserted in the passive effects loop are still in the signal chain when any or both sections of HI POWER are in bypass.

HI POWER features a power-up bypass/engage pre-set function for the footswitches. That way you can select which state your pedal will go to when you plug the power supply. This function comes in especially handy to people that use remote pedal switchers / loopers as they only set the state of the pedal once and then operate from the controller.

All-analog dual booster/overdrive - amp in a box.
Recreates the tones of the legendary setup used by David Gilmour in the recordings of Pink Floyd's Wish You Were Here album.
Right side: Faithful reproduction of the Colorsound Power Boost/Overdriver circuits with true-to-the-original-spec BC184 transistors.
Controls: gain, bass, treble, master, voicing toggle.
Wide gain range control: from transparent boost to gnarly and fuzzy overdrive.
Two-band (treble & bass) Baxandall EQ.
Master knob sets overall output. Huge amount of dB boost available.
Toggle switch to select between the 18V Power Boost style circuit or the 9V Overdriver style circuit.
Left side: Hiwatt AMP in a box overdrive.
All analog simulation of the preamp and power amp sound and response.
Controls: gain, bass, middle, treble, master, input channel toggle switch, headroom toggle switch.
Gain control: from clean to big bold British crunch/overdrive.
3-band Hiwatt style EQ (bass, middle, treble).
Presence control follows the original design/is located at the negative feedback of the power amp simulation circuit to control the amount of upper mid and high frequencies.
Master knob sets overall output volume. Designed to respond like the original control producing more gain at higher settings.
Input channel toggle switch selects between normal, bright, or linked input channels of the AMP for different voicing and gain levels.
Headroom toggle switch selects between the high headroom and dynamic response of a 100W amp or the lower headroom and compression of a 50W power amp.
Independent operation of the BOOST/OVERDRIVE and AMP sections
Click-less true bypass design via high-quality relays for each section.
2 Footswitches / 2 Status LEDs - one for each effect section.
Power-up bypass/engage preset function for the footswitches.
Top-mounted jacks
Passive series effects loop to connect pedals between the two sections or use them separately as independent effects.
Power Supply: Use only 9V DC, 2.1 mm x 5.5 mm, center negative (not included).
Runs internally at 18V DC (via voltage doubler circuit) for higher headroom and tube-like performance.
Current consumption: 84mA.
British Racing Green die-cast enclosure with color-coded lettering for the control section (orange for BOOST/OVERDRIVE section, white for AMP section).
Dimensions: (W x L x H): 119 x 97 x 53 mm.
Weight: 444 g.
Made in Greece.

Notes: New all CLEAR EDITION for the new Stokyo Record Mate Portable Record Player.

Portable turntable on the Columbia Portable GP series, reengineered with the original crew for an all brand-new construction (mainly internal parts, molds and arm assembly)

Classic adapter and tonearm function of playing records on the wall (upright)

Play 12-inch or 7-inch records (3 -inch records with the STOKYO 3"adapter) on RM-1 portable turntable w/ pitch adjust

Output via built-in "new improved" speaker or RCA output

Each unit is battery or AC powered (batteries not included)

This model is exclusive to North America at 120V, with the transformer included.

Product under limited warranty for 1 year of purchase from STOKYO and authorized dealers

Warranty is limited to the RM series only and not the domestic GP series in Japan.

A cool back story from one of the founders at STOKYO :

"The story goes back around 22 years ago when the good folks at Xexxn would allow me to distribute these on the low for diggers and DJs overseas.

A few years later we (STOKYO and friends) did have the opportunity to take over manufacturing but ironically I was also at Vestax and at the time we had the Handy Trax.

Fast forward to 2019, this project took over 2 years but with the help of some original engineers, our manufacturing partner and the love we all shared for the original GP/GMX we bring you the all improved version.

The RM-1 and RMX -1 "RECORD MATE" series is the overseas edition. (GP-3R/GMX-3R are the JPN domestic model)

Updated molds, internal board, parts, new speakers, new case/tonearm construction, magnetic stereo cartridge (like you'll find on an AT-LP60), but everything else like the OG. The first model will be exclusive for the Americas (@ 120v).

As we continue to improve more parts to clear Global compliances, we also await for more parts with supply issues due to the Pandemic for our Global/EU model we aim to make available later in '22.

For those who pre-ordered, we originally aimed for an earlier ship date and our sincere apologies with all the port congestion but good news, it is on stateside awaiting customs. Arriving soon.

Thank you for the patience.

Big up to the crew for making this happen, grinding everyday and for your love we have for vinyl."

Notes: Part of Sonicware's Liven groovebox series, this time focussing on granular synthesis and effects processing. 128-step sequencer and shimmer reverb allow you to create grooves.

Supplier's Notes:
Sample, slice, transform and reconstruct audio to synthesize completely new sounds

The LIVEN Texture Lab offers a wide variety of sound textures ranging from beautifully lush ambient pads to chaotically aggressive experimental noise that will take you to new sonic frontiers.

The Texture Lab uses a granular processor that slices sounds into grains ranging from 2 ms to 1 second in length, then transforms and reconstructs them in a variety of ways, including manipulating grain shape, density, time warp, spatial position, and playback method to create entirely new sounds.

Granular synthesis parameters are easily accessed from 10 knobs and are designed for intuitive control

Granular synthesizer with granular effects processor mode

The LIVEN Texture Lab is a 4-voice polyphonic synthesizer that can record 32 samples of up to 6 seconds, generate grains from any part of a sample, and synthesize them using two modulations sources, an envelope generator, and process the sound through different filter types.

The Texture Lab can also be used as an effects processor for real-time granular processing of stereo signals from the line input. It is also possible to freeze the flowing sounds for 6 seconds to add granulated sound effects.

Shimmer reverb for fantastical and majestic sounding spaces

The LIVEN Texture Lab features six high-quality stereo reverb types. All reverb types have a shimmer parameter that allows you to layer reverb on top of reverb in octaves to create fantastical and majestic sounding spaces.

128-step sequencer with parameter locking

The LIVEN Texture Lab is equipped with a high-performance 128-step sequencer that has earned the LIVEN series a solid reputation. In addition to recording notes, it can also record changes in granular processing parameters over time.

You can record knob operations in real time or directly record parameters to specific steps allowing for more complex sound textures.

Specifications

[Granular processor]

Synthesizer mode
- Sampling up to 6 seconds per sample (16bit - 32kHz mono, Start/end point adjustment)
- Auto start sampling function with the input level (input level can be set)
- Internal resampling function
- 32 sample memory slots

Effects processor mode
- Real-time processing of stereo signals from the line inputs
- Freeze function


- Pitch: Pitch of the sample (i2 octaves)
- Position, Length/FB: The sample range for generating grains (with random position function)
- Speed, Direction: Playback speed, scan direction, and playback direction of the grains.
- Size, Shape: Size and shape of the grains (with random function)
- Timing, Jitter: Interval of generating grains (with our original LUSH setting)
- Density: Number of the grains (up to 64 grains in legato mode)
- Diffusion: Diffusion width of the grains
- Blend: Balance between the sample and the granular sound mix
- Modulation 1: LFO assignable to various parameters (with wave shape selection, start fade-in time, retrigger, and tempo sync)
- Modulation 2: LFO assignable to various parameters (with wave shape selection, retrigger, and tempo sync)


- Attack
- Release


- Low Pass
- High Pass
- Band Pass

Reverb effects
6 high-quality reverbs with Shimmer reverb parameters
- Hall
- Room
- Arena
- Plate
- Tunnel
- Infinity


- 4-note polyphonic mode (Up to 16 grains per voice, internal sequencer records up to 3 voices of polyphony)
- Mono mode (Up to 32 grains, adjustable glide time)
- Legato mode (Up to 64 grains, adjustable glide time)
- Arpeggiator modes (Up, Down, UpDown, DownUp, Up&Down, Down&Up, Up+1, Up+2, Down-1, Down-2, Random, Play Order)

[Sequencer]
- 1 track
- Up to 128 steps per pattern
- 128 patterns
- Step length can be set from 1/1 to 1/32
- Real-time recording
- Directly enter notes for each step when sequencer is on or off
- Enter longer notes (Tied notes)
- Metronome and pre-count function
- Undo/Redo function
- Transpose function
- Swing function
- Pattern BPM / Global BPM can be set
- Pattern chain function
- Parameter Lock function to record parameter settings for each step
- RANDOM function to play back steps in random order
- STUTTER function to play back only the step being pressed

[MIDI]
- Notes, control changes, clock input/output
- IMPORT/EXPORT of user data (Including samples) via Sysex
- Firmware update via Sysex

[Unit]

27 keys (with a hold function)


- 15 physical control knobs
- Optional LATCH function prevents jumps in value when knob position and parameter values do not match.
- One physical encoder for fine adjustments.
- LCD dot indicates when a parameter value matches the saved value, or when the value has been changed.

Notes: 48-ohm version of the DT700 Pro X, part of Beyer's iconic DT series of studio headphones. Closed back design for mixing and monitoring, with a revealing, analytical sound.

Supplier's Notes:
Your studio headphones

DT 700 Pro X

Trusted sound meets performance and flexibility

In launching the closed-back DT 700 PRO X, Beyerdynamic are unveiling circumaural studio headphones, which are set to usher in a era for the long-established, Heilbronn-based company. While the classics of the PRO X series are regarded as reference products in professional studios all over the world, the PRO line is suitable for flexible use both in the studio and while on the move. It is all made possible by the STELLAR.45 driver that loudly reproduces the best sound in studio quality without any distortion - with all playback devices.

Professional audio quality

Trusted studio sound meets high performance

The STELLAR.45 sound transducer, developed and produced in Heilbronn, Germany, delivers that proven Beyerdynamic sound at previously unattained levels of studio-headphones-class performance. This is down to the neodymium ring magnet as well as copper-clad high-tech wire. The trade-off between electrical conductivity and the weight of the wire is unique. In combination with the developed three-layer speaker diaphragm featuring integrated damping layer, this has created a highly efficient driver system that performs superbly on all playback devices.

The innovative membrane structure controls the axial motion of the voice coil and ensures that it remains securely positioned in the magnet gap even during high oscillations. Another benefit is vast and natural frequency response. The fast response of the transducer and the detailed transient response, produced by the low coil weight, create a sound that is always reliable and distortion free even at high sound pressure levels.

Flexibility

Wide range of applications on all playback devices

Anytime, anywhere - the wide range of applications offered by the PRO X line unleashes your creativity. Be it on an audio interface, laptop, tablet or mobile phone: Thanks to Beyerdynamic's high-performance STELLAR.45 driver, the PRO X headphones with an impedance of 48 ohms reproduce sound at volume and power to familiar levels of studio quality - on all playback devices. The cable concept is also demonstrably suitable for everyday use: the removable mini-XLR cable can be swapped out as required to be replaced with cables that have different lengths or feature other connectivity options.

Superb wearing comfort

Tailored fit for extra-long sessions

The PRO X line also embodies what these professional headphones have always been synonymous with: maximum wearing comfort. The robust spring steel headband design assures the over-ear headphones provide a secure fit and ensures durability. The supple velour ear pads are soft to the touch, as you would expect, and guarantee superior ventilation. The headband ergonomically adapts to the shape of the wearer's head with the aid of soft memory foam and, like the ear pads, can be replaced if required.

Design & materials

Built to last, featuring a sleek, robust design

Black, minimalist and reduced to the essentials. In a word: PRO. As far as the design of and materials used in the PRO X line are concerned, attention was paid to the resilience of all components: metal headband, GRP components, a robust mini-XLR connector and hard-wearing cable. This means you are geared up on a daily basis for any professional application.

Sustainability

Sustainable headphones - made in Germany

The PRO X line headphones have been designed for daily use in challenging conditions. This is why they are handmade in Germany using premium quality materials. If required, nearly all the headphones' components can be replaced, turning these headphones into an investment that makes sense for every creator.

Technical data

Transmission type: Wired
Earpad material: Velours
Nominal impedance headphones: 48 ohms
Weight headphones without cable: 350 g
Headphone frequency response: 5 - 40,000 Hz
Nominal sound pressure level: 100 dB SPL (1mW/500Hz)
Sound coupling to the ear: Circumaural (around the ear)
Cable & plug: 3 m or 1.8 m straight cable, detachable, with 3-pin mini XLR & stereo jack (3.5 mm & 6.35 adapter)

Review: This is a very special and exclusive new version of what is a sonnet cold classic album from the annals of jazz history. Few albums hold the prestige of Getz/Gilberto which was released in 1964 and is a special collaboration between saxophonist Stan Getz, guitarist Joao Gilberto, and composer Antonio Carlos Jobim which very much represents a pinnacle moment in the fusion of jazz and bossa nova. Across its ten tracks, the album weaves a mesmerisng tapestry of melody and rhythm, casting a spell that continues to captivate listeners over half a century later. At the heart lies the symbiotic relationship between two musical giants: Stan Getz, the virtuosic tenor saxophonist renowned for his velvety tone and lyrical phrasing and Joao Gilberto, the Brazilian guitarist and vocalist whose soft, intimate delivery epitomizes the essence of bossa nova.

Notes: Another update for WMD's clever dual VCA, this time a little bigger to give more control. Digital control of CV and attenuation gives lots of creative options. Third time's a charm.

Supplier's Notes:
WMD have done several designs of this circuit over the years, the first one had no knobs, the second was too small, the MKIII is finally how this circuit should be packaged. This module does some really cool stuff and is super useful in any system.

The Digital VCA lets signal through like a normal VCA, but the CV and attenuation level is controlled digitally. This lets us do things like wait until there is a zero crossing to change the amplitude, resulting in clickless amplitude changes.

The Trigger mode causes the VCA to only update when a trigger is received. The addition of a noise circuit for each side let us do a very quick and easy sample and hold that never droops. With no input, 5V is normaled to the attenuator, so you get a 0-5V sample and hold. In Bipolar mode, you can get -5 to +5V.

Both sides have bipolar VCA mode (polarizer), which lets them invert the signal when negative CV comes in. Also known as ring modulation. With the zero crossing detector, this can produce some super wild wave shapes.

Features

Dual VCA Design
Unipolar or Bipolar Operation
DC Coupled Analogue Signal Path
Low Distortion / Low Noise
VCA Closes Completely
Zero Crossing Detector Mode
Trigger Mode
Two Independent Noise Sources
8 bit CV resolution
Great for Fast Envelopes and Sine Bass Sounds

Specifications

Power: +65mA, -45mA
Width: 8HP
Depth: 35mm with cables
Height: Eurorack 3U (128.5mm)
Board Height Behind Panel: 112mm
CV/Signal Input Impedance: 100k
Output Impedance: 1k
UPD in 3.3V Threshold Schmitt Trigger
ZCD produces 15us 5V pulse
5V CV to fully open VCA
Linear VCA response
20Vpp signal handling

Review: Here it is: the all-time great album that popularised jazz for the masses, and which carries the genre's torch to this day. Most works by Coltrane serve as good introductions to jazz’s endemic practice of through-composition, but A Love Supreme (1964, Impulse!) is arguably among his best works to come in four suites; to quarter a technically singular piece. Widely recognised as the moment at which John all-aboarded the Soul ‘Trane, the album marked the apogee of a wave of popular analyses of US jazz records as holding special spiritual significance. This early vaunting may have fed into its popularity into the present day; but we cannot gloss over the fact that such elevations in status do not tend to come without supreme merit, and more level-headed takes on the LP simply interpret it as one of the most impeccably performed, precisely timed jazz records of its day. Remastered for the esteemed Analogue Productions series, its everlasting flame is rekindled.

Notes: Bucket brigade delay gets pushed into exciting creative territory with this beauty from Joranalogue. Precise analogue delay with loads of character, capable of simple chorus and flanger or more exotic Karplus-Strong synthesis and comb filtering.

Supplier's Notes:
While digital audio processors are often plagued by latency issues, analogue circuits are known for their instant response. But what if you want to delay a signal on purpose, without the use of tape or digital memory? Enter the bucket brigade delay (BBD) line: a series of capacitor 'buckets', which pass the incoming signal along at a high rate in order to delay it.

Delay 1 is a fully analogue BBD-based delay module with a multitude of features geared towards modern musical use. An integrated temperature-compensated, high-frequency voltage controlled oscillator (VCO) provides the 'clock' signal necessary to drive the delay line within 1 to 50 ms.

By increasing the drive frequency to over 20 kHz, the classic 'BBD clock whine' problem is solved, while still providing a wide range in delay time. Classic chorus, flanger and echo effects are easily achieved using the dry/wet blend, feedback and damping parameters.

To greatly reduce distortion and noise, Delay 1 includes a newly developed control circuit. The improved fidelity is maintained at a multitude of signal levels by an integrated high-performance compander, while maintaining signal dynamics.

The module's 'split phase' topology provides two different dry/wet mixes, which may be used to convert mono signals to stereo, for complementary comb filtering and more.

Delay 1 also allows you to experiment with Karplus-Strong synthesis, an exciting technique to create string and percussion type sounds. This is made easy by an integrated noise transient generator, driven by the 'pluck' input, and by the clock VCO's 1 volt per octave response.

By re-engineering the classic analogue delay line, Delay 1 brings the unique magic of BBDs into the contemporary electronic musician's arsenal.

Analogue bucket brigade delay line.
Integrated temperature-stable high-frequency BBD clock VCO with fine and coarse tuning.
Split-phase topology with additive and subtractive dry/wet blend outputs.
Blend, feedback and damping (feedback filter) parameters. Positive or negative feedback with low or high pass filtering.
High-performance BBD drive circuitry and transparent compander chain ensure optimal signal fidelity.
Dedicated pluck trigger input for Karplus-Strong synthesis.
High-frequency BBD clock input and output to synchronise multiple delay lines.
Impedance-compensated outputs with dual-colour LEDs.
Trim potentiometer accessible from the front panel.
Premium mounting hardware: black screws, black nylon washers and matching hex key.
High-quality components and assembly; designed and made in Belgium.

12 HP | +12: 125 mA, -12: 95 mA

Notes: A unique analogue take on granular synthesis, inspired by Yannis Xenakis, the Grainity pairs a granular filter with a multimode filter to create new textures and harmonics.

Supplier's Notes:
The Grainity brings a unique and never-heard-before concept to the world of analogue VCF.

While being based on analogue filtering only, the Grainity expands and enriches the sound in creating subharmonics, harmonies, unison, flanging effects and formant filtering all at once.

The module presents two sections, the granular filter itself and a typical multimode filter, each with its own output.

A third output offers a mix of both filter paths. Numerous controls and CV allow a very wide palette of results.

What is the Grainity

Granular?

The word granular was chosen for this filter module in relation to the concept invented by the composer Yannis Xenakis, and which is described as assembling small chops of sounds - he called grains - according to a pattern.

This is exactly what the Grainity does, no more no less ... but, digital control allows doing it in ways that are decades away from what tape and scissors allowed at the time.

Technology wise ...

In the granular section, the incoming sound cycle is determined in order to step through various filtering and phase variations of itself according to predefined patterns called structures.

The controls allow alterations to the cycling phase, cycling frequency offset (tuning), structure selection and frequency division of the filters cycling. This comes in addition to the usual filter frequency and resonance controls.

What the Grainity is not

Technology wise ...

Despite relying on a microprocessor, the Grainity is not a digital audio processor. At any time, the sound remains in the analog domain and goes through analog circuits from in to out.
The digital processor does not convert or generate audio signals; it is there to control the analog circuitry and manage the interface and display.

Sound wise ...

Several digital modules offering granular processing rely on the layering of sound grains, which leads to blurry and cloudy textures.
Layering of the grains is a late addition to the concept of granular synthesis and is not a mandatory feature of the concept.
The Grainity does not use delay lines or sampling memory but is nevertheless true to the foundations of the granular synthesis concept.

The granular VCF in the Grainity is unconventional in that, most of times, it is not filtering the sound in the common expectation of removing something. Typically, the granular process adds more than it removes by expanding both the lower range, creating subharmonics, and the upper harmonic contents in multiples ways.

Dimensions
10 HP
21 mm deep

Current Draw
101 mA +12V
59 mA -12V

Notes: DP-2000 is a digital percussion pad with 8 touch sensitive zones and a huge library of internal sounds.

A USB-to-PC/Mac interface enables integration with a software recording suite as a trigger controller and sound source. Sounds from the flagship DM-8 kit are stored internally, along with additional world percussion instrument samples and the option to add user samples from a USB flash drive. Sounds are assignable to pads and adjusted using the intuitive user interface and control surface, and each pad has a dynamic indicator which varies in brightness to mirror the playing dynamics. Dedicated MIDI in and out connections mean that the DP-2000 can expand a live playing setup or operate from hardware sequencers and other MIDI controllers. In addition to tuning and dynamics control, dual-engine DSP effects can be applied to each sound and tailored to suit each sound. If performance space is very limited, inputs for a hi-hat pedal, kick pad and an additional trigger can turn the DP-2000 into a fully playable super-compact e-drum kit. Add the possibility of music playback from USB flash drive and comprehensive input and output options, the DP-2000 is as much at home as a standalone instrument or as an expansion to an existing drum or percussion kit.

Add hi-hat & kick triggers for a full e-drum kit
USB-C Bluetooth adaptor
USB interface to PC/Mac
Importable WAV files for custom sounds
Power supply: 9Vdc, 500mA (tip-negative) adaptor supplied
Inputs: Aux input, trigger, hi-hat, kick, MIDI 5-pin DIN, USB-C (U-Disk)
Outputs: Headphones (3.5mm), L+R output (6.3mm), MIDI, USB-B (PC/Mac)
Dimensions: 408 x 314 x 62mm
Weight: 2.8kg

In the box

The box for this item contains:

DP-2000 digital percussion pad
DC power adaptor
USB-C Bluetooth adapter

Notes: An expander module for Rossum's powerhouse Assimil8or sampler module, the Locutus provides MIDI in, out and thru connections over 5-pin DIN sockets, letting you take full control of the module alongside other MIDI gear.

Supplier's notes:
Locutus is designed to interface Assimil8or with MIDI instruments, controllers, and sequencers to provide multichannel modulation and new polyphonic possibilities.

Locutus includes a special cable to connect to the Assimil8or CPU behind the panel.

Locutus is 6 HP wide and 25mm deep.

More pricing and availability information is coming soon.

Locutus is on display in the MIDI Association booth #9901 at NAMM 2023 where Locutus and Assimil8or will be performing with a Rossum SP-1200 Reissue, an Oberheim OB-X8, and other new and vintage MIDI-equipped instruments.

MIDI Association booth #9901 is dedicated to the MIDI@40 Lifetime Achievement Award winners, including Rossum Electro-Music co-founder Dave Rossum.

From the MIDI Association: "At Saturday's anniversary celebration, lifetime achievement awards will be presented to (or posthumously honour) legendary music industry innovators who created the modern music production environment of synths, drum machines, and sequencers, including Bob Moog, Don Buchla, Ikutaro Kakehashi, Tsutomu Katoh, Roger Linn, Tom Oberheim, Alan Pearlman, Dave Rossum, and Dave Smith."

Notes: This is a digital effects pedal in a compact format, including reverse delay - pitch shifter - delay and modulated reverb.

Effects engine is 12 bit and includes analogue filtering before and after digital conversion, based on vintage eighties units' topologies, but it allows for all the effects to be simultaneously available.

Despite its complexity, operation is simple and intuitive, all functions are directly controlled by the corresponding knob.

Pots controls:

1-Blend controls mix of effects over final output signal
2-Octave blend mix a pitched signal to the input of the reverb
3-Octave -1 +1 controls tuning of pitch component
4-Repeat controls feedback of delay component 5-Balance controls mixture from reverb and
delay.
6-Sample rate controls the frequency operation for the whole pedal, modifying delay time
and reverb decay.
7-Reverse blends the reverse component with the direct signal.

Indicators:

Signal: indicates clipping, the input path has compression and limiting so it gives an idea of how hard you are driving the pedal.

Tap: blinks at the rate of the delay, depending on tap and sample rate.

Tap/freeze: turns red while tapping time, blue indicates reverb freeze.

Bypass: global effect on/off

Footswitches:

1-Tap/ freeze works as a tap tempo for the delay and reverse delay, and freeze/infinite for reverb, selected by the associated toggle switch. Max delay time is around 6 seconds, depending on sample rate setting.

2-Bypass: buffered bypass for the whole pedal.

Power consumption: 150 milliamps.

Notes: The next generation of Ableton Live controller from Akai, the APC64 is designed for seamless integration with the software, or as a standalone step sequencer and controller. The 64 velocity sensitive pads handle playing, recording, clip launching, sequencing and much more, while eight assignable touch strips offer extensive hands-on control.

Supplier's notes:

APC64; Next generation Ableton live controller.

Touch the future

Leap into a new world of musical possibility in the studio, on stage, and anywhere creativity leads you with the powerful APC64.

Ableton live controller; with sequencer and touchstrips

The new Akai Professional APC64 is a powerful next-generation Ableton Live controller for studio and live performance.

It features 64 RGB velocity-sensitive pads with poly aftertouch, and 8 fully assignable Touch Strips for instant hands-on control of devices, pitch, modulation, and much more. APC64 also works as a standalone 32-step 8-track Step Sequencer and controller with 3 MIDI ports and 8 CV/Gate outputs to take full control of synths, drum machines, or modular rack devices.

In-depth control of Ableton Live

Enter the matrix

APC64 features a vibrant 8x8 pad matrix of 64 velocity-sensitive RGB pads with poly aftertouch for playing chords, synth leads, Ableton Live's Drum Racks and of course launching Clips in Session View.

Touch the future

Add a whole new level of expression and control to your music production and live performances with 8 fully assignable Touch Strips with RGB LED indicators. Get control of Ableton Live's devices - including Auto Filter, Delay, Reverb, Impulse, Simpler and more - right at your fingertips. Adjust macros, mixer volume, pan, and effects sends as well as writing automation.

Visual feedback and control

APC64 includes a smart colour LED screen with a fast push encoder for real-time visual feedback of your parameters. Move around Ableton Live's devices and mixing environments while keeping track of each parameter on the screen. APC64 also features dedicated transport control with Play, Stop, and Record for capturing your ideas along with 8 Track Mute and Solo buttons for mixing and live performance.

Standalone step sequencing

APC64 features an internal 32-step 8-track Step Sequencer enabling completely DAW-less control of your favourite synths. With 8 CV/Gate outputs and 3 1/8" MIDI ports, you can connect, sequence, and capture your favourite modular racks, keyboards, classic drum machines, and more. Add continuous control and expression using the 8 Touch Strips for a whole new level of performance. Apply additional creative dimensions to MIDI notes using the Probability, Velocity, and Mutate functions for further experimentation.

Powerful production and performance

APC64 facilitates a seamless workflow within Ableton Live; from triggering samples and loops in Ableton Live's Drum Rack, all the way to writing expressive melodies using the Notes, Scale, and Chord modes. Use the onboard Step Sequencer to generate inventive melodic patterns that can be instantly transferred to Ableton Live using the Send To Clip function. Apply swing and quantize to your beats or use APC64 to arm and record vocal tracks directly in Ableton Live sessions.

Ableton drum rack/simpler control

APC64 features a dedicated Drum Mode allowing you to play and record beats, loops, and slices using an Ableton Live Drum Rack or Simpler device. Capture additional inspiration using the 8 Touch Strips to control Ableton Live's FX racks during beat making and performance.

Included software bundle

Ableton Live Lite 11

APC64 Includes Ableton 11 Lite for all your software music production needs in one package to produce, perform, arrange, record, edit, mix and master your music. Live Lite includes sounds, instruments, and sequencing, recording, and arranging capabilities.

Air music instruments/plugins

APC64 Includes a collection of professional plug-in instruments and effects so you can start producing out of the box. Included are the following plugins: TubeSynth, Electric, Ether, Halfspeed, Vocal Tuner, Flavor, and the Sonivox Essential Keyboard Collection.

Custom editor software

Create your own custom layouts with the included desktop software editor for Mac/PC to personalize and store pre-sets for quick recall in standalone.

Key specs

Display
Graphical full colour LCD
Connections: USB-C, 8x 1/8" (3.5 mm) CV/Gate, 2x 1/8" (3.5 mm) MIDI Output, 1x 1/8" (3.5 mm) MIDI Input
Dimensions (width x depth x height): 10.7" x 14.6" x 1.4" 272 x 371 x 34.5 mm
Weight: 3.5 lb/1.6 kg

Notes: Your studio headphones

DT 900 Pro X

Trusted sound meets performance and flexibility

In launching the open-back DT 900 PRO X, Beyerdynamic are unveiling circumaural studio headphones, which are set to usher in a era for the long-established, Heilbronn-based company. While the classics of the PRO series are regarded as reference products in professional studios all over the world, the PRO line is suitable for flexible use both in the studio and while on the move. It is all made possible by the STELLAR.45 driver that loudly reproduces the best sound in studio quality without any distortion - with all playback devices.

Professional audio quality

Trusted studio sound meets high performance

The STELLAR.45 sound transducer, developed and produced in Heilbronn, Germany, delivers that proven Beyerdynamic sound at previously unattained levels of studio-headphones-class performance. This is down to the neodymium ring magnet as well as copper-clad high-tech wire. The trade-off between electrical conductivity and the weight of the wire is unique. In combination with the three-layer speaker diaphragm featuring integrated damping layer, this has created a highly efficient driver system that performs superbly on all playback devices.

The innovative membrane structure controls the axial motion of the voice coil and ensures that it remains securely positioned in the magnet gap even during high oscillations. Another benefit is vast and natural frequency response. The fast response of the transducer and the detailed transient response, produced by the low coil weight, create a sound that is always reliable and distortion free even at high sound pressure levels.

Flexibility

Wide range of applications on all playback devices



Anytime, anywhere - the wide range of applications offered by the PRO X line unleashes your creativity. Be it on an audio interface, laptop, tablet or mobile phone: Thanks to the high-performance STELLAR.45 driver, the PRO X headphones with an impedance of 48 ohms reproduce sound at volume and power to familiar levels of studio quality - on all playback devices. The cable concept is also demonstrably suitable for everyday use: the removable mini-XLR cable can be swapped out as required to be replaced with cables that have different lengths or feature other connectivity options.

Superb wearing comfort

Tailored fit for extra-long sessions

The PRO X line also embodies what these professional headphones have always been synonymous with: maximum wearing comfort. The robust spring steel headband design assures the over-ear headphones provide a secure fit and ensures durability. The supple velour ear pads are soft to the touch, as you would expect, and guarantee superior ventilation. The headband ergonomically adapts to the shape of the wearer's head with the aid of soft memory foam and, like the ear pads, can be replaced if required.

Design & materials

Built to last, featuring a sleek, robust design

Black, minimalist and reduced to the essentials. In a word: PRO.

As far as the design of and materials used in the PRO X line are concerned, attention was paid to the resilience of all components: metal headband, GRP components, a robust mini-XLR connector and hard-wearing cable. This means you are geared up on a daily basis for any professional application.

Sustainability

Sustainable headphones - made in Germany

The PRO X line headphones have been designed for daily use in challenging conditions. This is why they are handmade in Germany using premium quality materials. If required, nearly all the headphones' components can be replaced, turning these headphones into an investment that makes sense for every creator.

Technical data

Transmission type: Wired
Earpad material: Velours
Nominal impedance headphones: 48 ohms
Weight headphones without cable: 345 g
Headphone frequency response: 5 - 40,000 Hz
Nominal sound pressure level: 100 dB SPL (1mW/500Hz)
Sound coupling to the ear: Circumaural (around the ear)
Cable & plug: 3 m or 1.8 m straight cable, detachable, with 3-pin mini XLR & stereo jack (3.5 mm & 6.35 adapter)

Notes: Music's best octave pedal in a powerhouse pico package!

EHX's smallest and most powerful compact Polyphonic Octave Generator yet. The Pico POG takes the streamlined simplicity of the Micro and Nano POGs and fits it all into an ultra-compact chassis and adds a powerful tone control. The tightest octave effect now fits on the tightest of pedalboards.

The EHX Pico POG features a lighting fast feel that will track every note and chord you play with precision. Dial in Sub Octave to add stumble rumble or monstrous thunder. Add Octave Up for ethereal air or max it out to shred into another galaxy. Perfectly blend 3-voice tones for fat synthy madness. The 3 mode Tone control lets you tailor your sound to fit into any pocket no matter how massive or small.

Controls on the Pico POG include dedicated volumes knobs for the SUB OCTAVE, OCTAVE UP, and DRY voices. These three controls act as a mixer for infinite possible voice mixes. The TONE knob features three modes controlled by the FILTER button. In Tone Mode, the knob acts as a tilt-EQ with a flat frequency response in the center, more treble and less bass as you turn the knob clockwise, and less treble and more bass as you turn the knob counterclockwise. In this mode, the EQ is applied to all 3 voices. In Low Pass Filter mode, the knob cuts highs in the Sub and Octave Up voices, while High Pass Filter mode cuts lows in the Sub and Octave Up Voices.

Lightning-fast tracking with perfectly precise octave tones

3 volume knobs control level of SUB OCTAVE, OCTAVE UP, and DRY tones

TONE knob with 3 filter modes

Tone Mode applied tilt-EQ to all output

Low Pass Mode applies a resonant low pass filter, which allows low frequencies to pass while cutting higher frequencies of the Sub and Octave Up voices

High Pass Mode applies a high pass filter, which allows high frequencies to pass while cutting lower frequencies of the Sub and Octave Up voices

Power adapter included

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 3.65 x 2.0 x 2.0
Current Draw: 100mA
Year Released: 2023

Review: Who doesn't love the White Stripes? One can quite predictably measure a band's impact on commercial music history by way of just how many full-blown reissues they've released, many of which aim to repackage and represent albums to their fullest, most honest effect. By that metric, this ubiquitous duo are more than certainly going down in history; Elephant, the Stripes' fourth album, is lent the sonic perfection and signature packaging it deserves, with Analogue Productions and Third Man Records teaming up for the ultimate reissue edition here. They present in UHQR format on Clarity Vinyl this modern rock cornerstone, limited to 10,000 copies. It comes with gold foil numbered jackets, housed in a premium slipcase with a wooden dowel spine.

Notes: Part of the new Boss 200 series, the RV-200 is a seriously classy reverb. With a choice of 12 algorithms, things quickly move from classic ambience to the pitch-shifted arpeggiated madness of the new Arpverb program.

Supplier's Notes:
Ambient Bliss

The RV-200 delivers inspiring reverbs and premium sound in the streamlined BOSS 200 series design. Twelve versatile reverb types-including the newly developed Arpverb-provide everything from subtle spatial colour to complex, dreamy textures for ambient explorations. Quickly dial in sounds with the fast-access interface. Save favourites in 127 memories. And take performances to the next level with flexible onboard footswitches, deep external control support, and head-turning creative tools like Warp, Twist, and more.

Studio-Grade Processing

The RV-200 features a powerful reverberation engine with class-leading sound quality, backed by custom BOSS DSP, 32-bit AD/DA, 32-bit floating point processing, and a 96 kHz sampling rate. Every algorithm offers true studio-grade performance, with exceptional detail and definition from the shortest early reflections to long, floating tails spanning multiple seconds.

Twelve Distinctive Reverbs

From essentials like Room and Hall to deeply immersive reverbs like Shimmer, Slowverb, and the cool new Arpverb, the RV-200 gives you the ambient colours you need for every song and style.

Room

Simulates the reverberation characteristics of a small room. Select from four room sizes with the Param knob.

Hall

Simulates the reverberation characteristics of a concert hall. Select from three hall sizes with the Param knob.

Plate

Simulates the reverberation characteristics of a studio plate reverb. Balance the high and low damping of the reverb with the Param knob.

Spring

Simulates the distinctive sound of the hardware spring reverb effect found in guitar amplifiers. Select the number of springs with the Param knob.

Shimmer

Creates long, dreamlike reverberations rich in harmonic content. Adjust the harmonic character and diffusion with the Param knob.

Arpverb

A newly developed BOSS reverb that creates an arpeggio type of sound with evocative pitch-shifted tails. Use the Param knob to adjust the attack of the arpeggio sound.

Slowverb

A sweet ambient reverb with gentle attack and soft harmonics. Param adjusts the amount of direct sound blended with the reverb, allowing you to create deep, immersive tones.

Modulate

Adds a modulation effect to a rich hall reverb sound. Adjust the modulation depth with the Param knob.

+Delay

Combines a delay with reverb, with the length of both effects controlled with the Time knob. Use the Param knob to adjust the delay level.

Lo-Fi

A specialty reverb with limited bandwidth and added distortion. Adjust the distortion amount with the Param knob.

Gate

A distinctive reverb effect that abruptly cuts off the reverb tail. Use the Param knob to control the timing of the gate effect.

Reverse

Plays the reverb sound in reverse. Adjust the high-frequency character with the Param knob.

Instant Sound Creation

Like all 200 series pedals, the RV-200 offers a powerful yet intuitive panel that lets you realize great sounds with minimal effort. Along with core parameters such as reverb time, effect level, and pre-delay, there are variable high and low filters to perfectly balance the verb for your application. You also have a density control to adjust the weight of the sound, plus a parameter knob with access to multiple sound-shaping tools that are unique to each type.

Expressive Performance Control

The RV-200 includes memories for storing 127 reverb sounds, so your favourite setups are always ready to go. Two onboard footswitches pack a lot of performance versatility, with numerous options to reassign their targets to suit your needs. For example, you can bypass the effect, scroll through memories, and activate a Hold function to carry on the reverb effect for as long as the switch is pressed. It's also possible to assign powerful performance effects such as Warp, Twist, and Fade.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point
Modes: 12 modes- ROOM, HALL, PLATE, SPRING, SHIMMER, ARPVERB, SLOWVERB, MODULATE, +DELAY, LO-FI ,GATE, REVERSE
Memory127 + Manual
Nominal Input Level: INPUT A/MONO, B: -10 dBu
Maximum Input Level: INPUT A/MONO, B: +7 dBu
Input Impedance: INPUT A/MONO, B: 2 M ohms
Nominal Output Level: OUTPUT A/MONO, B: -10 dBu
Maximum Output Level: OUTPUT A/MONO, B: +7 dBu
Output Impedance: OUTPUT A/MONO, B: 1 k ohm
Recommended Load Impedance: OUTPUT A/MONO, B: 10 k ohms or greater
Bypass: Buffered bypass
Controls: ON/OFF switch, MEMORY/HOLD switch, MODE knob, TIME knob, PRE-DELAY knob, E. LEVEL knob, PARAM knob, LOW knob, HIGH knob, DENSITY button, MEMORY button
Display: 7 segments, 3 characters (LED)
Indicator: DENSITY indicator, MEMORY (MAN, 1--4) indicators

Connectors
INPUT (A/MONO, B) jacks, OUTPUT (A/MONO, B) jacks: 1/4-inch phone type, CTL 1, 2/EXP jack: 1/4-inch TRS phone type, MIDI (IN, OUT) jacks: Stereo miniature phone type, DC IN jack, USB port: USB2.0 micro B (program update only)
Power Supply: Alkaline battery (AA, LR6) x 3, AC adapter (sold separately)
Current Draw: 260 mA

Expected Battery Life Under Continuous Use: Alkaline: Approx. 4 Hours
* These figures will vary depending on the actual conditions of use.
Accessories: Leaflet "USING THE UNIT SAFELY", Leaflet "To obtain the Owner's Manual", Alkaline battery (AA, LR6) x 3, Rubber foot x 4

Options (sold separately):
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
TRS/MIDI connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight

Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height(including rubber feet): 65 mm / 2-9/16 inches
Weight: 610 g / 1 lb 6 oz
Weight (including battery): 680 g / 1 lb 8 oz

Notes: Dial in Professional Sounds in Seconds

The BOSS ME series has been a favourite of performing guitarists for over three decades, combining multi-effects power with intuitive hands-on control for crafting tones in seconds. The ME-90 is the most advanced ME model to date, offering exceptional audio quality, flagship-grade AIRD amp models, IR loading, an effects loop, and more. Compact, battery-powered, and filled with premium BOSS tones, this versatile all-in-one processor makes it easy to build customized sound setups for every playing situation.

Fast Sound Creation

With its knob-driven interface and diverse effects selection, the ME-90 lets you build configurations and tweak tones with the ease of a stompbox-filled pedalboard-without the hassle of fastening tape, power distribution, and multiple connection cables. Just dial up an amp model or effect type within a category and turn the knobs to get the sound you want. There are 36 preset patches with ready-to-play pro tones, plus 36 user patches for storing your custom creations.

Flexible Real-Time Control

The ME-90 features eight footswitches with smooth, quiet operation and an expression pedal with an integrated toe switch. Use Memory mode to call up complete patch setups with the footswitches, and then switch to Manual mode for direct on/off control of each effect category within the patch. The footswitch LEDs light in different colours for quick identification in the heat of a performance. It's also possible to set all LEDs to light in a fixed colour for each mode if desired.

High-Quality BOSS Effects

The ME-90 puts a massive library of BOSS effects at your command, offering seven different categories filled with selections derived from the flagship GT-1000. Everything you need is here, from overdrives and distortions to pitch/mod effects, delays, and high-quality reverbs. You also get 11 dedicated Pedal FX, a looper, and specialized effects such as acoustic simulation and down tuning. There are 60 effect types in total, with access to over 20 more via BOSS Tone Studio. A send/return loop is available for external pedals, complete with the ability to save the on/off status in patches and place the loop before or after amp models in the signal chain.

Premium Amp Sounds with AIRD Technology

Along with its effects, the ME-90 includes amp models ported from the GT-1000, driven by our advanced AIRD technology for authentic tube tone and touch response. Eleven onboard amp types offer everything from clean combo sounds to punishing high-gain stacks, and you can access more selections in BOSS Tone Studio. Each amp includes a dedicated cab sound for connecting to a PA or recording device, and you can load three of your favourite speaker IRs to personalize sounds to your taste.

Edit, Customize, and Expand

BOSS Tone Studio for macOS and Windows extends your creative range, allowing you to edit tones and change out some amp and effect types with alternate selections. In addition, you can save and organize patches for different gigs, download pro setups at BOSS Tone Central, and swap patches with the ME-90 community on BOSS Tone Exchange. The ME-90 also supports the optional Bluetoothr Audio MIDI Dual Adaptor, enabling you to stream music from a mobile device and wirelessly shape tones using the dedicated BTS editor app for iOS and Android.

Light, Durable, and Ready to Travel

The ME-90 is lighter than its previous generation model while maintaining the rock-solid durability that BOSS is famous for.

Specifications
Sampling Frequency: 48 kHz
AD Conversion: 24 bits + AF method
AF method (Adaptive Focus method) This is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters.
DA Conversion: 32 bits
Processing: 32-bit floating point
Effects: 97 Types
Memories: 36 (User) + 36 (Preset)
Phrase Loop: 38 sec. (MONO)
Tuner Internal Detection: +/-0.1 cent
Nominal Input Level: INPUT: -10 dBu, RETURN: -10 dBu
Maximum Input Level: INPUT: +7 dBu, RETURN: +7 dBu
Input Impedance: INPUT: 1 M ohm, RETURN: 1 M ohm
Nominal Output Level: OUTPUT (L/MONO, R): -10 dBu, PHONES: -10 dBu, SEND: -10 dBu
Output Impedance: OUTPUT (L/MONO, R): 1 k ohm, PHONES: 44 ohms, SEND: 1 k ohm
Recommended Load Impedance: OUTPUT (L/MONO, R): 10 k ohms or greater, PHONES: 44 ohms or greater, SEND: 10 k ohms or greater

Controls:BANK DOWN/AMP switch, BANK UP/EQ switch, CTL/REV switch, MEMORY/MANUAL switch, 1/COMP switch, 2/OD/DS switch, 3/MOD switch, 4/DELAY switch, PEDAL FX switch, Gt. AMP/LINE switch, POWER switch, EXIT button, WRITE button, CTL button, EDIT button, PREAMP TYPE knob, GAIN knob, BASS knob, MIDDLE knob, TREBLE knob, LEVEL knob, REVERB knob, COMP/FX1 TYPE knob, SUSTAIN/SENS/-1OCT knob, ATTACK/TONE/-2OCT/DEPTH knob, LEVEL/PEAK/DIRECT knob, OD/DS TYPE knob, DRIVE knob, TONE knob, LEVEL knob, MOD TYPE knob, RATE/KEY knob, DEPTH/HARMONY knob, E.LEVEL/RESONANCE knob, DELAY TYPE knob, TIME knob, FEEDBACK knob, E.LEVEL knob, OUTPUT LEVEL knob, PEDAL FX TYPE knob, PEDAL FX pedal
Display: 7 segments, 2 characters (LED)

Connectors: INPUT jack, OUTPUT (L/MONO, R) jacks, SEND jack, RETURN jack: 1/4-inch phone type
PHONES jack: Stereo miniature phone type
USB COMPUTER port: USB Type-C(R)
Bluetooth ADAPTOR connector: Dedicated connector
DC IN jack

Power Supply: Alkaline battery (AA, LR6) x 4 or AC adapter
Current Draw: 190 mA

Expected battery life under continuous use:
Alkaline battery: Approximately 6.5 hours
* This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
Accessories: STARTUP GUIDE, Alkaline battery (AA, LR6) x 4, Leaflet "USING THE UNIT SAFELY"

Options (sold separately)
AC adaptor: PSA-S series
Bluetooth(R) Audio MIDI Dual Adaptor: BT-DUAL
Carry Bag: CB-ME80,CB-BU10

Size & weight

Width: 443 mm / 17-1/2 inches
Depth: 220 mm / 8-11/16 inches
Height: 67 mm / 2-11/16 inches
Maximum Height: 93 mm / 3-11/16 inches
Weight(including battery): 2.9 kg / 6 lb / 7 oz

Notes: A fresh twist on a simple 303-style acid synth, featuring a triangle/sawtooth/square wave VCO, multi-mode resonant filter, simple AD envelope and a VCA which can be overdriven. Excellent value.

Supplier's Notes:
ADDAC started this module with the idea of developing a complex drum source however, somewhere along the process, it was clear how much better it performed as a synth voice and this lucky accident was embraced.

It features a VCO with a [FREQUENCY] and [FINE TUNE] knob plus a dedicated CV Input and Attenuator knob (tunable over 4 octaves).

The VCO waveform output is achieved by selecting either a Triangle or Saw through a switch. the selected waveform can then be mixed/balanced against the square wave. The resulting mix is then sent to the Filter.

The Filter features a [CUTOFF] and [RESO] resonance knob plus a Cutoff CV Input and Attenuverter knob.

A 3 position switch is used to select the filter type: Highpass, Bandpass or Lowpass.

The resulting output is then sent to the VCA.

The VCA features an Input with [INPUT GAIN] knob which at maximum can amplify the incoming signal by a factor of 2.

This is a very important control, it accepts any signal Trigger, Gate or CV. Whatever input is plugged in the signal is then fed through an AD with a very short attack and controllable decay through the [VCA DECAY] knob plus the CV Input and Attenuverter knob. The resulting slewed signal is then used to control the VCA gain.

This signal is also sent to the CV OUTPUT as well as the LED monitor.

The Accent input adds to the Input signal creating a different amplitude output.


The CV OUTPUT is normalled to the Frequency and Cutoff inputs.

Tech Specs:
9HP
4cm deep
80mA +12V
80mA -12V

The [INPUT GAIN] knob

Usually Attack/Decay envelopes have a maximum voltage of +5v, no matter if the input gate is +5v or above the AD will clip at +5v. In this case, this clipping method was not used, and instead ADDAC allowed the incoming voltage to determine the maximum AD voltage, meaning that if a +5v gate is present then the AD maximum voltage will be +5v but if a gate of +10v is sent then the AD maximum voltage will be +10v.
This also means that with higher input voltages the decay, although falling at the same speed, will be longer than with lower voltages as it has a longer range to go back to 0v.

As previously mentioned, The [INPUT GAIN] knob can amplify the incoming input by a factor of 2, allowing to use a standard +5v gate or envelope and being able to make the resultant AD go up to +10v.

The AD signal is responsible for opening the VCA. Up to +5v the VCA will open to unity gain above this value the VCA will start to amplify and eventually saturate and distort. This saturation will add harmonics to the signal which will change its gentle timbrical nature to a more unique and peculiar timbre that will make the module shine in Acid contexts.

Adding high levels of Resonance or even filter self oscillation in combination with high VCA saturation will create even more harmonics that ADDAC highly encourage the user to explore.

Notes: Part of Xaoc's range of modular mixing tools, the Bohumin 1966 is a commander module for Ostrawa stereo mixer modules, adding a second stereo aux bus, voltage control and manual attenuators with clickless mutes

Supplier's notes:
Bohumin [bo'xumin] is an expander for Xoac Deives' Ostrawa full stereo mixer module. By connecting to Bohumin, Ostrawa gains a second full stereo AUX bus with voltage control over the amount of the effect on each channel. Bohumin features manual attenuators for stereo returns of both AUX A and AUX B, as well as four gate inputs for automated clickless muting of each stereo input channel. Please note that Bohumin is not compatible with Ostrawa's sister module Praga. Similarly, Praga's expander Hrad cannot be connected to Ostrawa. However it is possible to chain any combination of Ostrawas and Pragas, and each of them may have its corresponding expander attached.

Technical details

10hp, skiff friendly
Power drawn from Ostrawa: +50mA/-40mA

Notes: Part of Xaoc's Leibniz binary system, the Rostock is a digital delay line capable of processing triggers, audio, CV and video signals. Another useful module from the unique Leibniz series.

Supplier's Notes:
Rostock is a component of the Leibniz Binary Subsystem. It is a data pipeline, a FIFO (first in - first out) shift register, or a very short digital delay. The module operates similarly to a BBD delay or an ASR (analogue shift register), except that it is digital. It consists of a chain of memory cells that pass bits from one to another at each clock cycle. The delay length is variable from 1 to 64 stages (with optional looping and scrambling). It works by processing data in the Leibniz bus and must be connected to other Leibniz modules using data ribbon cables at the back. Rostock may process data sequences representing rhythms, control voltages, audio-rate signals, and even video signals because the bits can change at extreme rates (up to 2MHz). In addition, its memory may be digitally looped. Delaying and looping is a fundamental building block for sequence automation, pattern and chaos generation, and various cybernetic modular patches. Thus, Rostock is a multi-purpose open-ended device that invites creative thinking.

Technical details

Eurorack synth compatible
8hp, skiff friendly
Current draw: +70mA/-40mA
Reverse power protection

Notes: The SoundForce Chorus 6 is 16HP Juno style BDD chorus with plenty of CV inputs. It is using the Xvive MN3009 and the same audio path as the original circuit. It can do the classic Juno I, II and I+II modes. I+II modes are available from both the Juno 6 and Juno 60, each in mono (as the original) or stereo, giving you 4 I+II options. But the manual and external modes can take the module away from sweet and pretty sound territories right into weird and noisy soundscapes.

Some tech-talk:

A chorus effect is created by mixing a dry signal with a delayed signal. The delay time is modulated by an LFO to create more movement. To create some stereo width, the left and right modulation are 180 degrees out of phase. Exactly like the chorus in the Juno 6/60/106, the delay is made with MN3009 BBD chips. Also as in the original design, filters are added both before and after the BBD chips in an attempt to hide some of the artefacts of this very crude IC.

To get the audio "moving" through the chain of MOSFETs in the BBDs, driver signals are needed. This used to be done with the MN3101 BBD driver chip. Unlike the MN3009, there is no clone available of this ancient IC and this was a chance to add some modernity to the design. The drivers were replaced by a modern STM32 micro-controller along some extra ICs to convert the 3.3V logic to the negative voltage needed by the MN3009.

In order to recreate a genuine Juno-type modulation, the BBD driver signals of my Juno-106 were sampled over a few periods. Using the timer peripherals of the STM32, a replica of the BBD driver signals can be sent out to the MN3009's. Although the driver signals only follow a very basic triangle LFO shape and could have been generated using direct synthesis in the firmware, this method gives an exact copy of the original driver signals including all the potential imperfections.

Implementing a digital programmable chip also allows a digital-style interface with tactile switches and LEDs as in the original Juno interface. The last used mode is saved and loaded when the module powers on. The CV inputs (with the exception of the MIX CV) are acquired by the STM32 ADC and can modulate the BBD driver signals based on parameters in the firmware.

Features:

The SoundForce Chorus 6 has 4 main modes: I, II, I+II, MAN for manual and EXT for external. I and II are the classic Juno modes available in the Juno 6/60/106. Press both I and II to enter the I+II mode. While holding down I and II, press the OFF button to cycle through the 4 I+II options:

- Juno 60 mono - 1hz - 8% depth
- Juno 60 stereo - 1hz - 8% depth
- Juno 6 mono - 8hz - 25% depth
- Juno 6 stereo - 8hz - 25% depth

In I, II and I+II, only the mix controls can influence the sound, all the other parameters are fixed and CV inputs are not active.

Mix control:

Using the slide pot (fader) or the CV input, the mix between the dry input signal and the BBD delays output can be set. The orignal Juno balance is reached when the slide pot is in the middle (without CV connected). The mix control is a VCA-based crossfader and is 100% analog which means it can withstand really high audio rate frequency modulation.

MAN mode:

The manual mode gives you the opportunity to control every parameter of the chorus and gives you acces to the LFO that modulates the BBD delay times. Here is what you can tweak:
- time slide pot: sets the start delay time
- rate slide pot and CV input : sets the frequency of the delay time modulation
- depth slide pot and CV input: sets the depth of modulation around the start time
- mix slide pot and CV input: see above
- LFO wave: selection of different waveforms to modulate the delay time
- range: selection of 3 different frequency ranges for the LFO (S: 30Hz to 500Hz | M: 1Hz to 100Hz | L: 0.016Hz/1min to 10Hz)

In manual mode, the EXT IN CV input can be used to change the LFO wave, range or add additional modulation of the delay start time.

EXT mode:

In external mode, the BBD delay times can be modulated using an external signal through the EXT IN cv input. Plug in a CV source from your eurorack case into the EXT IN, set manually the starting delay time using the time slider and use the EXT ATT slide pot to attenuated the incoming CV signal (equivalent to setting the depth). In external mode, the depth/rate sliders and CV inputs are not active.

Stereo inputs:

The Chorus 6 can be used with either mono or stereo input signals. When the right channel is unconnected, the left channel is sent to the right jack so it can be used with mono signals. When using both inputs, each input signal is going through its own BBD delay line.

BBD delay time range:

The Chorus 6 gives you in the MAN and EXT modes a delay range that it is about doubled compared to the I/II modes. The original Juno chorus was using only a very limited range of the BBD chip and really stayed in the sweet spot. Extending to the full spectrum of the MN3009 yields pretty horrible high pitch noise at audio rate modulation, so the range has been limited to a usable section. When you apply high frequency modulation with great amount of depth, the delay time will be pushed in the extremities of its time range and quite nasty artifacts will appear in the form of squeaks and whines. Please note this is a characteristic of the BBD. If you want to reduce those artifacts, reduce the depth of modulation. On the other hand, if you are looking to add characteristic and vibe to the sound, audio rate modulation and plenty of depth will help you to get there.

Input levels:

Both Eurorack and Line level signals can be used as input for the Chorus. A small slide switch between the 2 PCBs can switch between Euro and Line. In Euro levels, the input signal is attenuated to an healthy level that is well below the BBD distortion point. Some headroom is also needed as the chorus is a sum of the input signal and the modulated delayed signals. For that reason, when the chorus is turned off the output attenuation is about 50% of the input level. When the chorus is on, the resulting output amplitude is similar to the input level. Line levels are also accepted by the module when the switch is on Line. Please note that Line levels input will be amplified to the Eurorack levels range at the output of the module. So the output levels are Eurorack in both Euro or Line input ranges.

Specifications:
16HP
Depth: 38mm (including power connector)
Power: +12V 76mA, -12V 35mA

Notes: Updated version of Arturia's consistently popular MIDI keyboard series, featuring a bigger screen and new performance features.

Supplier's Notes:
Arturia's new KeyLab Essential 3 offers a new level of accessible, enjoyable, and creative music making, redefining the essence of a modern universal keyboard controller.

From its refreshing new design, to its vastly upgraded creative workflow, to an expanded software package, it promises to shake up the affordable controller market by empowering modern musicians and sound explorers looking to expand their setup without breaking the bank.

Main selling points

Fit for any style and any setup

For DAW producers, musicians with hybrid setups, or performers using hardware; enhance any creative setup or musical style with MIDI out & USB power, deep DAW compatibility, and premium software.

The new standard for affordable keyboard controllers

A keyboard controller that doesn't need tons of controls, menu diving, or complex configuration to operate. KeyLab Essential 3 looks modern, feels great, and removes creative barriers for next-level music making.

Directly-linked with Arturia's industry-leading software ranges

Many musicians and producers will be familiar with Arturia's award-winning software; KeyLab Essential 3 is part of the same range, seamlessly integrating with Analog Lab V, Pigments, and V Collection.

New Features:
New creative features: Scale Mode, Chord Mode, and Arpeggiator, making composition, songwriting, and beat-making more intuitive than ever.
Custom DAW integration: KeyLab Essential 3 features custom scripts for deeper control over DAWs, including Ableton Live Logic Pro X, FL Studio, and more.
More versatile presets: The 2000 presets included with Analog Lab V are no longer limited to vintage sounds; users can enjoy unique hybrids, modern synths, orchestral sounds, and more.
Easier controls & interface: RGB-backlit pads with velocity and pressure sensitivity, contextual button, and a bright new 2.5" LCD screen for real-time feedback.
Expanded software package for beginners & pros: Now includes Analog Lab V, 2 pianos (UVI Model D, NI's The Gentleman), plus subscriptions to Loopcloud and Melodics.

Notes: Six segment generator. Looping or one shot envelope generator. Chainable, so it can be expanded to link multiple units.

An exact hardware replica of the Mutable Instruments Stages.

Dimensions
14 HP
25 mm deep

Current Draw
80 mA +12V
20 mA -12V
0 mA 5V

Notes: Simply sophisticated

With the 200 series, BOSS introduces a new generation of pedals that pack advanced sound and versatility into a streamlined size that saves space on your board. Grab-and-go controls and multi-function switches make operation easy and intuitive, while onboard memories allow you to store multiple setups for instant recall. All 200 series pedals feature premium audio quality with 32-bit internal processing and offer support for external control via footswitches, an expression pedal, or MIDI.

The OD-200 Hybrid Drive brings next-level sound, feel, and flexibility to overdrive and distortion, combining decades of BOSS tone expertise with innovative technologies. Powered by hybrid analogue/digital circuitry, this dream pedal delivers any drive tone you can imagine via 12 primary modes, 15 boost types, series/parallel gain paths, and more. There's even an advanced gate on board, ideal for both eliminating noise and adding tightness to high-gain drive tones.

Version 1.1 Update: User Memory Expansion

The free Version 1.1 software update brings increased flexibility to the BOSS 200 series, greatly expanding the onboard memory capacity for storing and recalling sounds. There are now 128 user setups available. Setups can also be recalled directly via MIDI program change.

For optimal performance, stay up to date with the current OD-200 system software

Premium Drive Tones with BOSS's Advanced Hybrid Design

The OD-200's next-generation hybrid design seamlessly brings analogue and digital clipping circuits together for the best of all worlds, putting a universe of expressive drive colours under your fingers. Twelve modes offer a variety of premium overdrive, fuzz, and distortion sounds, including a high-gain Brown mode derived from the acclaimed Katana amplifier series. And with the three high-performance "X" drive modes powered by BOSS's cutting-edge MDP tech, you'll experience enhanced definition, clarity, and dynamic response that's perfect for modern playing styles.

Powerful Gain Shaping with Series and Parallel Boosts

While each of the OD-200's 12 main drive modes sound fantastic on their own, you're able to craft tones even further with 15 switchable boost circuits. Placing the boost in series lets you create traditional stacked drive voices, complete with post-gain level to balance with the bypassed sound or kick up the volume for solos. The boost circuit can also be used in parallel with the main mode, enabling side-by-side blending for an unlimited range of unique drive textures.

Kill the Noise and Tighten Your Tone

With its integrated gate circuit, the OD-200 always keeps your signal clear and quiet when you're not playing. The default setting is a great starting point, providing gentle, transparent gating that works well for general playing styles. The decay and threshold controls can also be adjusted for super-fast gate performance when needed, perfect for bringing tightness to heavy modern styles that combine full-throttle gain with precision staccato riffing.

Dial in Sounds Fast

The OD-200 offers a ton of advanced capabilities, but remains as simple to use as any regular distortion stomp. With dedicated controls, you can quickly dial in the gain and overall level for any selected mode, then sculpt the tone with wide-ranging low, mid, and high EQ. There's also a multi-function parameter knob, which changes operation based on the group selected with the panel's parameter switch and LED status indicators.

Save and Recall Your Favourite Setups

The OD-200 features 127 user memories plus a real-time panel setting, giving you 128 total setups to choose from. Any range of consecutive memories and the panel setting can be assigned for scrolling access from a footswitch. It's also possible to limit the scrolling range or assign memories directly for even faster recall.

Specifications

Sampling Frequency: 96 kHz
AD/DA Conversion: 32 bits
Processing: 32-bit floating point
Drive Circuit: Analogue + Digital

Modes:
12 modes
OVERDRIVE, BLUES, SCREAM, CNTR OD, X-DRIVE, DIST, X-DIST, STACK DRIVE, FAT DIST, BROWN, X-METAL, FUZZ

Memory: 127 + Manual
Nominal Input Level: INPUT: -10 dBu
Maximum Input Level: INPUT: +7 dBu
Input Impedance: INPUT: 1 M ohm
Nominal Output Level: OUTPUT: -10 dBu
Maximum Output Level: OUTPUT: +7 dBu (Load Impedance: 220 k ohms or greater)
Output Impedance: OUTPUT: 1 k ohms
Recommended Load Impedance: OUTPUT: 10 k ohms or greater
Bypass: Buffered bypass

Controls: ON/OFF switch, MEMORY/BOOST switch
MODE knob, DRIVE knob, LEVEL knob, PARAM knob, LOW knob, MIDDLE knob, HIGH knob
PARAM button, MEMORY button
Display: 7 segments, 3 characters (LED)
Indicator: PARAM indicator, MEMORY (MAN, 1--4) indicators

Connectors:
INPUT jack, OUTPUT jack: 1/4-inch phone type
CTL 1, 2/EXP jack: 1/4-inch TRS phone type
MIDI (IN, OUT) jacks: Stereo miniature phone type
DC IN jack
USB port: USB micro B-type (program update only)

Power Supply: Alkaline battery (AA, LR6) x 3, AC adaptor (sold separately)
Current Draw: 220 mA

Expected Battery Life Under Continuous Use:
Alkaline: Approx. 6 Hours
* These figures will vary depending on the actual conditions of use.

Accessories:

Leaflet "USING THE UNIT SAFELY"
Leaflet "To obtain the Owner's Manual"
Alkaline battery (AA, LR6) x 3
Rubber foot x 4

Options (sold separately):
AC adaptor: PSA-S series
Footswitch: FS-5U
Dual footswitch: FS-6, FS-7
Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5
MIDI/TRS connecting cable: BMIDI-5-35, BMIDI-1-35, BMIDI-2-35, BCC-1-3535, BCC-2-3535

Size & weight:

Width: 101 mm / 4 inches
Depth: 138 mm / 5-7/16 inches
Height: 63 mm / 2-1/2 inches
Height: (including rubber foot)65 mm / 2-9/16 inches
Weight: 600 g / 1 lb 6 oz
Weight (including battery): 670 g / 1 lb 8 oz

Notes: RackBrute 3U is a comprehensive Eurorack housing, transport, and protection solution. Featuring configurable positions, dependable power supply, and maximum practicality, you can be assured your precious modules will be well guarded.

Don't worry; your beloved modules are under heavy guard.

Modular gear is a precious commodity, and you need a versatile housing and security system to accommodate them. A first glance, you'll see that this is a perfectly fitted 3U, 88 HP case made of a light but strong aluminium chassis, fitted with wood side panels.

Deceptively simple, RackBrute is far more than a simple box. It includes many smart additions, such as the included +12V / -12V / +5V power supply that ensures that keeps everything up and running, and the multi-position handle system that not only lets you carry your collection with ease, but also lets you deploy an optimal operating angle, whatever your preference.

Ready for anything

Secure an unobstructed viewpoint over the theatre of operation, and hold the position 'til further orders.

In addition to keeping your modules safe and secure, RackBrute 3U gives you total control of the situation, no matter the context. The first of its secret weapons is the Link fastening system. Paired with the included handle, it will let you choose one of several configurations and orientations for your modular arsenal. Whether you want your gear stealthy and prone, or standing to attention, RackBrute is at your command.

The second trick up its sleeve is the stalwart, ever-reliable, power supply module. Including two independent circuits to supply common modular voltages, it will more than cover your need for +12V, -12V and +5V, providing up to 1600mA in total.

Thirdly, its robust power rail includes a sophisticated noise-filtering technology, and provides 20 standard slots to leave plenty of space for your collection.

Once you're powered, in position, and locked down, you'll feel like your modular rig could withstand a siege.

Joining forces with allies

Always remember the Modular Republic's motto: Unity is strength.

The Link fastening system not only equips the RackBrute 3U, but also its large-calibre sibling, RackBrute 6U as well the MiniBrute 2 and MiniBrute 2S. No matter the combination you go for, you can make the most out of your extensive module collection, or create a powerful EcoSystem with the extensive CV/Gate connectivity of the MiniBrute 2 and 2S.

It's also worth noting that although this technology comes straight from the top secret Arturia research labs, they are working for the greater good. The Link system is patent-free, so you can expect more and more Link-enhanced equipment to become available in the near future.

Do not wait for reinforcements, bring them yourself.

Let's move out

Arturia have made sure that your gear would arrive without any scratches.

When carrying precious cargo, dozens of fragile modules, a unique and irreplaceable collection, you need to be certain of their safety. With RackBrute 3U, you have nothing to fear: from the handle, all the way to the threaded nut strips, you'll find strong aluminum and steel. Wherever you go, however long your journey, however heavy your setup, RackBrute was built to last. Even transporting two RackBrutes or a RackBrute and a MiniBrute 2 is totally risk-free thanks to the built-in Spacers, eliminating any chance of collision.

If you are planning an undercover mission, the dedicated, discrete RackBrute Travel Case will keep your precious equipment free from harm.

When you need to take your show on the road, rehearse, or even just rearrange your creative space, you can depend on RackBrute.

What's in the box

Box content:

RackBrute 3U unit
Power cord
Instrument dimensions
Size : 19 x 6.6 x 3.3 inches (484 x 167 x 83mm)
Weight : 4.7 lbs. (2.1 Kg)

Main Features:

Eurorack format, 88 HP
Aluminum Chassis
Provided with a 5 HP power module
Up to 1600mA on +12V and 1600mA on -12V (2 separate circuits of 800mA)
Up to 900mA on 5V (USB + 5V modules)
Power rail with noise filtering
20 standard power slots with up to 800mA on +12V and -12V
Link system and smart handle to fasten a MiniBrute 2/2S or another RackBrute unit in various configurations
Built-in Spacers for the highest protection in transport configuration

Notes: A characteristically unique take on mixing from Buchla, with six mono inputs and a built-in mic/guitar pre-amp. Each channel can be cued to a monitor mix, while the first and last channels also include voltage-controlled panning.

Supplier's Notes:
The Tiptop 207t is a modern reimagining of the classic Don Buchla 207 Mixer/Preamplifier from the 1970s 200 Series. This stereo mixer comes with a built-in preamp that allows you to boost external instruments and microphones, making it a versatile tool for any modular setup. The 207t also features a six-channel mixer with a variety of signal routing options, including the ability to route channels to the monitor and L&R signal outputs, with per-channel control over loudness and panning.

Each channel has a Mon switch that sends the channel's signal to the monitor outputs, which are always full-volume and summed to mono, making it useful for basic monitoring applications or rudimentary mixing. The Prog switch sends the signal to the L&R signal outputs, with loudness controlled by the Level Adjustment slider and panning determined by the Channel Assignment knobs. The first and sixth channels offer voltage control of panning; these channels are hard-panned when no CV is applied.

The preamp section features a 1/4" input and multiple gain settings, making it suitable for use with external line level instruments, electric guitars, or dynamic microphones. The continuous amplification control provides added flexibility for your audio needs. Finally, the Expansion In is a stereo input that sums to the left and right main outputs, which is great for chaining multiple 207t modules or adding another stereo source at the final output.

While the 207t's functionality may be simple, it is an essential part of any 200t system, serving as the glue that holds everything together. The Tiptop 207t is a fantastic mixer/preamp option that delivers quality sound and reliable performance.

Buchla 207t Features

Mixer/preamp module based on Don Buchla's original 207 design
Six-channel mixer with per-channel level control and panning
Voltage-controllable panning on channels 1 and 6
Manual panning on channels 2-4
Program switches can act as channel mutes for main outputs
Mon switches route signal (in mono) to Monitor output
Expansion input useful for stereo chaining and more
Re-designed preamp for high audio fidelity
Preamp suitable for use with external instruments, electric guitars, dynamic microphones, and more

Eurorack module
28hp wide

Notes: Really clever stuff here. The Octaves VCO takes an additive approach, layering harmonics on top of a fundamental frequency to create complex tones. Control the six bands via CV to adjust the harmonic content.

Supplier's Notes:
A harsh and funky take of an additive Oscillator.

Pile up multiplications of your frequency to get a lo-fi-retro wall of squared sound!

You get six doubled frequency pulses, or octaves, with common PWM and volume control for each of them.

The output of each is cascaded to the next one, so you can either have one output with all frequencies or break the chain and get several sums and modulate each independently!

Features
Six bands, multiple of the base frequency.
Square wave oscillator with Octaves selector PWM control and sync.
Range control for Tune pot.
Volume CV control and individual output for each band
Cascaded summing outputs.

Specifications
Current needs: +12V: 110mA, -12V: 84mA
Width: 12 HP
Depth: 22mm (assembled and DIY), including power connector
Aluminium, heat-treated front panel
Designed, kits prepared and completed modules assembled in Barcelona

Notes: The Aether is a modulating delay pedal.

The initial vision for the design of The Aether came shortly after the release of the Wardenclyffe Deluxe. The intention was to take design the philosophies and incorporate tonal characteristics that made the Wardenclyffe so special, but this time as a delay pedal.

At the heart of The Aether is a PT2399, tap tempo delay. It has the standard Echo, Feedback, and Time controls you would expect on any delay, but what makes it special is the Color, Saturation, and Degrade Controls. The Color toggle completely changes the character of the Aether and has two voices: Warm Analog and Bright Tape. The Saturation knob is a gain adjustment that overdrives the delay chip. The Degrade toggle adds lofi textures and artifacts to the delay line. The Degrade toggle removes a very vital section of the delay circuitry that keeps the delay stable with longer delay times. As you increase the delay time, the artifacts become more present and lofi.

The Aether uses a simple, but versatile modulation LFO core inspired by the Wardenclyffe, but with more features. The LFO cores sets it apart from other modulated delays out there. The speed of the modulation core can be set 3 different ways: Rate knob, tap tempo tact switch, and Sync toggle. When the Sync toggle is set to its middle position, the LFO can run at whatever speed you want. When the Sync toggle is in the up position it is synced to the delay time. When the Sync toggle is in the down position, it is synced to delay time, but in half-time for slower evolving moduation. The Shift knob determines the depth of the modulation; this has plenty of range in case you want to get really obscene. The Stray toggle changes the LFO from a typical Sine wave to a Slewed Random waveform. Creative exploration of the modulation section of The Aether is strongly encouraged. The way the delay rate and LFO rate interact with each other can yield very creative results.

Notes: A Juno-inspired oscillator module? We're flattered, but credit has to go to Roland for this one. Based on the Juno-106's digitally-controlled analogue oscillators, the Castor & Pollux modernises the 80s design with a built-in LFO and hard sync.

Supplier's Notes:
Twins that dance in and out of phase, never completely together but never fully apart, bound to each other in the infinite universe.

Castor & Pollux is a dual oscillator that echoes back to the legendary Roland Juno but shines with its own unique, massive voice. It contains two digitally-controlled analogue oscillators implemented using a faithfully modernized version of the original Juno 106 design. It builds on the classic '80s sounds of its inspiration by using the second oscillator and internal LFO to layer in thick detuned sounds and harmonically complex hard synced waveforms.

Castor & Pollux II brings a redesigned interface and moves individual waveform outputs to an included expansion. Both versions have the same features and use the same firmware.

14 HP
+12 V @ 100 mA, -12 V @ 35 mA
25 mm deep
2 separate oscillators
7 octave range
9 total outputs with waveform outputs and onboard mixers
Pitch CV input jacks (0 V to 6 V) and pitch knobs (-1 to +1 octave, configurable)
Pulse width CV input jacks and knobs
Hard sync
Hardware chorusing
Internal low-frequency oscillator (LFO)

Notes: Expandable 4 channel VCA based stereo mixer with tone shaping and FX bus.

Chipset:

For this item, Frequency Central offer a CHIPSET which contains the following:

3 x LM13700

For all other components required, please see the build document.

Features:

4 x input channels, each featuring LEVEL, HIGH, LOW, FX send, PAN, MUTE and CV control of level.
FX send and stereo return + FX phase jumper
Left and Right Eurorack level inputs (2 x 3.5mm sockets)
Left and Right line level outputs (2 x 6.35mm sockets)
Scribble strips!

Strips is also expandable! You can add a second strips, connected to the first via a 16 pin to 16 pin cable. The cable powers the second Strips and gives you 8 channels to play with. The second Strips accesses the first Strips FX bus. When using in expanded configuration, the FX send/return and main outputs for the second Strips are not available. Here's how!

FX phase jumper - because not all FX that you might use in the FX loop are in phase with respect to their input/output. The phase jumper allows you to compensate for this and avoid weird phase cancellations.

Product Specifications

12V draw: - 43mA
5V draw: - 0mA
-12V draw: 43mA
Depth: 39mm

Notes: ***B-STOCK: Box opened, product in perfect working order***


3 Channel 80s/90s Preamp

The VESTA contains a brand new set of voices from KRS along with a familiar feature set. Based on a couple of your favourite amps of the 80s and 90s, you'll feel right at home. Picture a classic Crunch tone suitable for rock and blues, along with a familiar 90s high-gain sound. If modern extended range high-gain is your thing, the CERES delivered. If you're more at home on a 6 string, the VESTA may be your preference.

It's smooth, chunky, thick, and more low-mid focused. It takes boosts just like your favourite vintage high-gain amps. It responds incredibly well to the guitar's volume control. Note: The Clean channel is identical to the CERES'.

Top mounted jacks allow for easy integration into your existing pedal board. Unique to our pedal operation, we include 3 bypass modes - True Bypass, Buffered Bypass, and Clean Bypass. In True and Buffered bypass the pedal operates as expected, no tonal coloration. The Clean Bypass mode enables the top row of Tone and Volume knobs accessing the Clean channel. These various Bypass Modes allow for integration into any style of rig - from driving a power amp directly (Clean mode), hitting a clean amp down the chain on your pedal board (True Bypass mode), or at the start of your pedal board, driving your other pedals into a clean amp (Buffered mode).

The preferred operating method is to run the VESTA into the input of the effects loop return of any amplifier head or directly into a power amp, but it will also work just as well when run into a clean channel with some EQ tweaking. For example, a typical Fender style clean circuit sounds best with Mids cranked, Bass around noon, Treble around 9-10:00, and Bright OFF. Tweak to taste...

Time based effects (delay, chorus, flange, etc) should be placed after the VESTA, before the power amp. A simple loop switcher can even be used to create effects loop(s) between the VESTA and power amp.

The VESTA includes two integrated footswitch buttons to activate the 3 channels. The left button toggles between Bypass and Rhythm/Lead.

The right button toggles between Rhythm and Lead. With the Bypass Mode switch set to Clean, bypassing the pedal actually activates the Clean channel.

Both distortion channels have the same switches and controls, and work in the same manner. However, Rhythm is inherently tighter and more aggressive than the Lead channel. Lead is more compressed and smoother and fatter overall. The Clean channel is not designed to get the "pushed" sound with the Level increased, rather it is designed to stay clean.

The gain controls in all channels feature the same range from clean to saturated signals and operate as close as possible to the full size KSR amps. They function without any unwanted top-end artifacts typically associated with solid-state circuits. The VESTA EQ options then make for a highly versatile Pre-Amp pedal giving you as much control.

Notes: Drums4 is a 4 voice, sample based percussion sound generator.

Each voice can select its sound from a 48 sample global bank, samples are curated from the manufacturer's collection of percussion sources used in their music.

Each sample can be tuned and has an individual output for independent processing , and there's also a simple mixer that controls levels to the main mixed output.

Operation is simple and intuitive, the selected sample is remembered after power down for each of the 4 voices.

Incoming triggers are displayed on each voice LED indicator.

Controls:
for each voice:
-PITCH potentiometer : for tuning sound over a wide range.
-SAMPLE SELECTOR encoder : allows choosing among 48 global samples , setting is
remembered after power down
-MIX potentiometer: adjust blending of each voice to the mix output

Connectors:
for each voice
TRIGGER jack : trigger or gate input , accepts a wide range of sources from 5v to 12v
OUT jack : individual sound output for voice
CV jack : allows external control of voice pitch, 0 to 5 volts range, over voltage protected.
Main Mix jack: summed output of mixed voices, controlled with mix pots.

Specifications:
width : 12HP
depth: 28 millimeters
Power consumption: 130 milliamps +12v , 10 milliamps -12v

Notes: This new pedal in Maneco's line is a versatile fuzz device , true stereo and with powerful tone shaping capabilities.

Main features:

True Stereo operation
Silicon Transistors gain stage.
Big Muff tone stack
Buffered clickless Bypass
Input gain for fine tuning distortion quality, also adapting for wide range of input signals
Bass, guitar , drum machines and synthesizer friendly
9v standard power supply, center tip negative

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Excellent quality portable turntable from the legendary Stanton brand. Rechargeable batteries, Bluetooth streaming and recording direct to USB. Ideal for portablism.

Supplier's Notes:
Stanton STX

Limited edition portable scratch turntable

Razor sharp cuts, right away

The STX is the only portable turntable that comes with a factory-installed mini Innofader Nano crossfader. Designed to last over 4 million cycles, this buttery-smooth fader and can be easily swapped between left and right positions to accommodate both left-handed and right-handed scratch styles. The independent crossfader Cut-In and Curve knobs deliver an unrivalled level of crossfader customization, allowing DJs to precisely calibrate the crossfader to suit their own style. This level of customization, along with the ultra-stable platter and tonearm, makes it easy to achieve the absolute cleanest cuts possible.

Scratch whenever, wherever

Second only to a sharp, ultra-precise crossfader, ease of portability is vital for a portablism-focused turntable. High-quality rechargeable Lithium-ion batteries are included with the STX, providing enough portable power for hours of mobile use. The batteries can easily be charged by connecting the unit to a computer or wall charger using the USB C input. For extended scratch sessions, the USB C input can also be used with external power sources for even more cutting time. To top everything off (literally), the latching lid also functions as a stackable, latching base, bring the STX to standard turntable height.

Well-connected for creators

Performing with beats and loopers is as simple as connecting a smartphone wirelessly with Bluetooth or with the 1/8" stereo input. The USB port with one-touch recording makes it fast and easy to record high-quality session audio for social media content creation, while the stereo RCA outputs allow you to connect external mixers and speakers for live performances.

Performance ready

The modification culture is alive and well in the portablism world. Since the inception of this art form, we've seen ingenious designs and customizations. The most popular and utilitarian mods are already included on the STX, including a Start/Stop button, an on-board speaker, and a pitch slider with Ultra-Pitch selection switch. These key features allow for inspiring performances right out of the box and provide a solid foundation upon which DJs can further customize to match their own unique portablist style.

Features

Mini Innofader Nano crossfader installed
Independent Crossfader Cut-In and Curve controls
Rechargeable batteries (included)
USB C input for charging batteries and for external power connection
Bluetooth and 1/8" stereo input for smartphone looper apps
Direct-to-USB recording
Built-in speaker
Pitch slider with Ultra Pitch option
Stackable latching lid
Start/Stop button
33 1/3, 45, and 78 RPM switch
Stereo RCA outputs
1/4" and 1/8" headphone jacks

Technical Specifications

Connections

(1) RCA line-level output (stereo pair)
(1) 1/4" (6.35 mm) stereo headphone output
(1) 1/8" (3.5 mm) stereo headphone output
(1) 1/8" (3.5 mm) stereo input
(1) USB-C port (charges the internal battery)
(1) USB-A port (USB flash drive recording)
Speeds 33 1/3, 45, 78 RPM (45 RPM adapter included)

Power

(2) 3.7V Li-ion batteries
Dimensions (width x depth x height)

13.0" x 13.0" x 4.0" (3.25" without cover attached)
330.2 x 330.2 x 101.6 mm (82.6 mm without cover attached)
Weight: 5.3 lbs./2.4 kg

Notes: The MOP-D10 is a multi-output power source that was developed by EHX engineers to provide a player with noise-free pedal operation. It features ten isolated 9VDC outputs that handle the most popular power requirements: 4x100mA, 2x250mA, 2x300mA and 2x400mA.

From its premium analogue power path featuring low-noise linear regulators to its custom-wound toroidal transformer, the MOP-D10 is designed to let a pedal user achieve a sonically pure signal path. Unlike many other multi-output power supplies which rely on switching power conversion, the MOP-D10's transformer-based power conversion is significantly less susceptible to spurious noises leaking into the audio path. An AC Voltage Selector Switch also ensures the MOP-D10 can be used with a range of voltages commonly found around the world.

Each of the MOP-D10's outputs is center-negative and all output power jacks are isolated from each other. The dimensions of each output connector are 5.5mm x 2.1mm. The unit is supplied with a 6' detachable power cord and ten 24" long DC power cables equipped with one straight and one right-angle end. It also includes hardware for pedalboard mounting.

Professional pedalboard power solution with ten isolated 9VDC outputs: 4x100mA, 2x250mA, 2x300mA and 2x400mA
Provides a premium analogue power path with low-noise linear regulators
Custom-wound toroidal transformer delivers exceptional isolation and clean power
Relies on transformer-based power conversion which is superior to switching power conversion
AC Voltage Selector Switch allows the MOP-D10 to be used with a range of voltages commonly found around the world
All output power jacks are isolated from each other for noise-free operation
Comes with ten 24" long DC power cables equipped with one straight and one right-angle end
Includes hardware for pedalboard mounting

Specifications

Dimensions (in): 7.87
Year Released: 2021

Notes: The perfect companion now comes in a smaller package - introducing Sidekick JR by Crazy Tube Circuits!

Drawing inspiration from the original Sidekick pedal released back in 2019, the aim was to create a compact pedal that combines the most widely used time-based effects, suitable for any gear setup seeking 80s tones and beyond.

From the jangly, ambient, and shimmering sounds of New Wave, Shoegaze, and Synth Pop to the wet tones of Hair / Glam Metal. Crazy Tube Circuits' Sidekick JR offers even more sounds / algorithm selections compared to the original unit.

The modulation effects / algorithms take inspiration from classic 80s stompboxes. The "Ensemble" algorithm replicates warm and mild modulated chorus sounds, while the "dimension" algorithm enhances the 3D image of your sound without the typical chorus warble. The "flanger" algorithm draws from a classic flanger pedal set up as a slow chorus with mild feedback added for a more metallic sound.

The Echo / delay section provides the sweet and vibrant sound of a tape echo with a freshly installed tape running through a colourful preamp, or the pristine repeats of an 80s digital delay rack unit.

The Reverb section in Sidekick JR is inspired by definitive examples of 80s reverb rack units and offers two algorithm banks. Bank A includes all-time classic reverb sounds like "plate," "spring," and "hall," while Bank B features signature 80s reverb sounds like "gated," "exciter" (Crazy Tube Circuits' trademark big-hall reverb algorithm with almost infinite reflections and decay), and octave-up "shimmer."

To provide full flexibility in the smallest enclosure possible, Crazy Tube Circuits has devised a smart switching setup. The delay and reverb effect sections of Sidekick JR operate independently from each other, and the modulation is assignable to any of these sections as standard. With the addition of the XT footswitch (available separately), the modulation section becomes entirely independent and can be switched on/off (true bypass) on its own.
Crazy Tube Circuits' Sidekick JR also features a power-up bypass/engage pre-set function for the onboard footswitches. This feature allows users to select the state the pedal will go to when the power supply is plugged in. It's particularly useful for individuals who use remote pedal switchers /loopers, as they can set the power-up state of the pedal once and then operate it from the controller.

Notes: SSL Recording Pack

Condenser mic, shock mount, studio headphones and XLR cable

Step Up Your Recording Game

Introducing the SSL Recording Pack from Solid State Logic, the all-in-one solution to capture your ideas and record great music. Available in a bundle with an SSL 2 interface, the SSL Recording Pack includes a condenser microphone with shock mount and thread adapter, closed-back studio headphones and an XLR microphone cable, bringing you everything you need to record with your SSL 2 interface.

Recording Made Easier

SSL Recording Pack includes everything you need to start recording now. Just plug your SSL microphone and headphones to your SSL 2 interface and start turning your ideas into records.

SMC 80 Studio Microphone

Capture every detail and nuance of your vocals, guitars and acoustic instruments with the SMC 80 studio condenser microphone.

SHP 20 Headphones

Listen with clarity and detail. Hear every step of your recording and production process with SHP 20.

Included with SSL 2 Interface

Bring Your Productions To The Next Level

The SSL 2 Interface include the acclaimed SSL Production Pack, featuring a selection of must-have virtual instruments, plug-ins, samples and DAW, to let your creativity shine and bring your productions to life.

What's in the Kit

SSL 2
SSL headphones (including 1/4" jack adapter)
SSL condenser microphone, shock mount and thread adapter (5/8" outer and 3/8" inner) for microphone stands
2.5 M XLR microphone cable

Specifications

SHP-20 Headphones
Operating Principle: Closed
Fashion: Supra-aural Transducer Type Dynamic
Loudhailer: 50mm
Impedance: 32 O
Sensitivity: 98 +/-3dB
Frequency Response: 15Hz-25kHz
Max. Power: 1200mW
Rating Power: 300mW
Cable: About 3m (straight)
Plug: 3.5mm + 6.3mm

SMC-80 Microphone
Element: 25mm condenser capsule
Polar Pattern: Cardioid
Frequency Response: 20Hz-20kHz
Sensitivity: -36dB+/-2dB (0dB=1V/Pa at 1kHz)
Output Impedance: 200+/-30% (at 1kHz)
Load Impedance: >1000 O
Self-Noise: 16dB A
Max. Input SPL: 136dB (at 1kHz<1% T.H.D)
S/N Ratio: 78dB
Phantom Power Requirement: 48V DC Phantom Power
Weight: ~340g
Dimensions:55x38x165mm

Notes: Altar is a 3-pole state variable discrete filter.

Its discrete core is a brand new design made of modern discrete transistors. The filter can morph continuously from Bandpass to Lowpass to Highpass via CV.

By changing the input gain the character of the filter can go from very clean and vocal to a more distorted acidic sound.

Technical details

Eurorack 3U module
12HP wide
33.5mm deep (including connector)
Max power consumption: +12V: 37mA | -12V: 32mA | +5V: 0mA

2 inputs, In I with variable gain, In II with fixed gain
1 output, state variable with the Color setting
Voltage controlled Resonance
Voltage controlled Colour

Notes: The Erica Synths Black Reverb is a versatile hi-fi stereo FX module with lots of unique features based on Erica Synths' custom DSP engine. The reverb sources are selectable Tape, BBD and "dirty BBD" digital; emulations with three modes, each - Room, Hall and Cathedral. Delicate room size control, feedback, feedback tone and stereo spin controls allow for designing extremely delicate reverberation effects. CV control over various parameters and the ability to save up to 10 presets will make this module an integral part of any performance rack.

Features:

Reverb based on Tape, BBD and digital delay lines
Three room sizes
Manual and triggered FREEZE with 1V/oct tracking
10 preset patches
CV control over size, feedback, tone, dry/wet mix and preset selection
Adjustable stereo spin

Specs:

Max audio input level before clipping 16Vptp
CV input range (full span) -5V - +5V
Sampling frequency 48kHz, 24bit
Audio codecs -108 dynamic range, -98dB THD+N
Power consumption 120mA@+12V, 39mA@-12V
Module width 12HP
Module depth 35mm

Notes: The Erica Synths Black Stereo Delay is a hi-fi stereo delay with a lot of unique features based on our custom DSP engine. Tape, BBD and digital delay emulations with three modes, each accompanied with delay time, feedback, feedback tone and stereo spread controls allow for designing extremely delicate effects. CV control over various parameters and the ability to save up to 10 presets will make this module an integral part of any performance rack. Delay effects are developed by Dutch company www.112db.com

Features

Tape, BBD and digital delay types
Three modes for each type
Tap and clock synchronization of delay time
10 preset patches
CV control over delay time, feedback, tone, dry/wet mix and preset selection
Adjustable stereo delay spread
The modules run on new Erica Synths DSP hardware and the effects are developed in collaboration with Dutch company 112.dB who make some of the most beautiful sounding effects.

Erica Black Series include high-end, unique functionality and superior quality modules. Only the best, highest-quality components are used, all inputs and outputs are protected against undesired overvoltage. Erica Black Series consist of range of modules that are needed to put together entire synth.

Technical specifications:

Max audio input level before clipping: 16Vptp
CV input range (full span): -5V - +5V
Sampling frequency: 48kHz, 24bit
Delay time: 3..3000ms
Audio codecs: -108 dynamic range, -98dB THD+N
Power consumption: 120mA@+12V, 39mA@-12V
Module width: 12HP
Module depth: 35mm

Notes: The HOUR GLASS Dual Compressor Pedal - Unlock timeless sustain and endless creativity with dual, independent circuits inspired by the legendary Ross compressor.

It is your ticket to extended sustain and unparalleled tonal control.

From warm, natural compression to soaring sustain, the HOUR GLASS opens up a world of sonic possibilities for you to explore.

Choose from Fast, Medium, or Slow Attack time options to tailor the HOUR GLASS's response to your playing style, and use the Treble toggle switch to select Flat, Medium, or High boost options to help shape your high-frequency tones.

Set one compressor for your single coil guitars, the other compressor for humbucker guitars and have precise tone and dynamic shaping when you switch guitars! Both compressors can also be engaged simultaneously for endless sustain!

Discover the freedom of expression with two independent circuits, that maintain the transparency of your guitar's tone. Precision controls for Level, Sustain, and Blend on each circuit allow you to sculpt your sound exactly as you desire. Built to withstand the rigors of time and the road, the HOUR GLASS is your reliable companion on every musical journey.

Unleash your creativity, transcend genres, and experience endless sustain with the HOUR GLASS Dual Compressor Pedal - Where Sustain has No Boundaries!