Search dance music

Notes: Constructed with 100% aluminium die casting, this sleek and robust keyboard stand weighs a mere 3.06kg, making it an incredibly lightweight and portable option. Designed to support keyboards with up to 76 keys and weighing up to 60kg, it offers reliability and strength for musicians on the go. Easy to set up and dismantle, this stand is a perfect choice for those looking to blend functionality with simplicity.

Features:

Maximum height: 1.30m
Capacity: 69.8kg
Weight: 3.49kg

Notes: Constructed with 100% aluminium die casting, this sleek and robust keyboard stand weighs a mere 3.06kg, making it an incredibly lightweight and portable option. Designed to support keyboards with up to 76 keys and weighing up to 60kg, it offers reliability and strength for musicians on the go. Easy to set up and dismantle, this stand is a perfect choice for those looking to blend functionality with simplicity.

Features:

Maximum height: 1.30m
Capacity: 69.8kg
Weight: 3.49kg

Notes: ***B-STOCK: Slight dent om the edge, otherwise in perfect condition***


VCO:

- Tune: manual tune control (with an internal jumper the range can be set to ~ +/-1 half an octave or ~ +/-2.5 octaves)
- Oct: range switch -1 / 0 / +1 octave
- Mod: modulation depth (attenuator wired to the Mod. socket)
- Dest: switch that is used to address the modulation to frequency modulation (position FM) or pulsewidth modulation (positon PM), in centre positon no modulation
- PW: manual pulsewidth control for rectangle waveform, PW can be also modulated by the Mod. input as mentioned above
- Wave: waveform switch (sawtooth / off / triangle), the sum of the waveform chosen by this switch and the rectangle is fed into the VCF (to turn the rectangle off the PW control has to be set fully CCW or fully CW)
- 1V/Oct. (socket): external CV input for VCO frequency (1V/octave)
- Access to internal bus CV (via jumper, optional, please remove the bus jumper if this feature is not used to avoid unwanted frequency modulation as then the unused CV line of the bus works as a kind of antenna)
- Triangle core VCO, frequency range about 32Hz ... 8kHz

Balance unit:

- The balance unit is made of two VCAs which are controlled by the sum of manual Balance control and the balance CV input in the opposite direction.
- The audio input of VCA1 is hard-wired to the VCO output, audio input 2 is connected to the socket Ext.In.
- The output of the balance unit is used as audio input for the VCF
- Bal.: manual balance control, fully CCW the internal VCO is used, fully CW the external signal (Ext.In) is used, at centre position both signals have about the same level
- CV Bal.: CV input for balance (range about 0...+5V)
- Ext. In: external audio input for VCA2, about 5 Vpp level required for similar loudness as the internal VCO
- This socket is normalled to the internal VCO suboctave f/2 signal (rectangle with half the frequency), if no external signal is applied the suboctave signal is used as the second signal for the balance unit

VCF:

- 24 dB low pass
- Frq: manual frequency control
- FM1: frequency modulation depth (attenuator wired to the VCF FM1 socket, the socket is normalled to the internal Envelope signal and then FM1 controls the modulation depth of the internal envelope applied to the filter)
- FM2 (socket) : second CV input for VCF without attenuator (about 1V/octave), can be used e.g. for VCF tracking by connecting the same CV which is used also for the VCO frequency
- Res: manual resonance control (up to self oscillation)
- If the VCO is turned off (waveform switch = centre position, pulsewidth control = fully CCW or CW) and the VCF resonance is set to maximum the module can be used as a sine oscillator, the tracking at socket VCF FM2 is about 1V/octave (not as precise as the VCO but much better than most other filters)
- ~ 11 octaves frequency range (~ 10 Hz ... 20kHz)

VCA:

- Gain: manual amplitude control (initial gain), can be used to open the VCA without envelope signal
- VCA (switch): used to switch between gate and envelope as control signal for the VCA, in centre position the VCA is not controlled by envelope or gate
- Note: when gate is used the VCA is controlled directly by the gate signal (i.e. hard on/off), this may lead to clicking noise under certain conditions (especially with low VCO/VCF frequencies)
- Special control scale: exponential scale in the range from about -20dB to -80/90dB, linear scale from about -20dB to 0dB
- Remark: this special control scale results in a loudness behaviour that is a bit different from pure linear or exponential VCAs
- Out: audio output of the module (= VCA output)

Envelope:

- Gate (socket): Gate input (min. +5V), can be normalled to the bus gate signal by means of a jumper
- Att: manual control for Attack
- D/R: manual control for Decay/Release
- Env. (switch): used to switch between A/D, ADSR and A/R mode of the envelope generator, in centre position (ADSR) the sustain level is fixed to about 50%
- Envelope (socket): envelope output (about +10V)
- CVT (socket): CV input for time control, by means of two internal jumpers one can select which time parameters are controlled by the CVT input (e.g. A only or D/R only or A/D/R) and in which direction (i.e. if an increasing CVT shortens or stretches the time parameter in question)
- Envelope LED display
- Attack time range: ~ 1ms ... 5 sec (can be extended by using the CVT input)
- Decay/Release time range: ~ 1ms ... 15 sec (can be extended by using the CVT input)

Notes: Constructed with 100% aluminium die casting, this two-tier sleek and robust keyboard stand weighs a mere 3.06kg, making it an incredibly lightweight and portable option. Designed to support keyboards with up to 76 keys and weighing up to 60kg, it offers the reliability and strength for musicians on the go. Easy to set up and dismantle, this stand is a perfect choice for those looking to blend functionality with simplicity.

Features:
Maximum height: 1,300mm
Capacity: 69.8kg
Weight: 8.19kg
Includes: 1 angled base and 1 straight, 1 pair of 45mm straight arms, one pair of 38mm arms

Notes: Constructed with 100% aluminium die casting, this two-tier sleek and robust keyboard stand weighs a mere 3.06kg, making it an incredibly lightweight and portable option. Designed to support keyboards with up to 76 keys and weighing up to 60kg, it offers the reliability and strength for musicians on the go. Easy to set up and dismantle, this stand is a perfect choice for those looking to blend functionality with simplicity.

Features:
Maximum height: 1,300mm
Capacity: 69.8kg
Weight: 8.19kg
Includes: 1 angled base and 1 straight, 1 pair of 45mm straight arms, one pair of 38mm arms

Notes: Adding a subwoofer to full-range speakers enables you to hear the low-frequency foundation of your mix more accurately so you can make better-informed decisions and create more translatable mixes. The surprisingly loud, 100 watt Erisr Sub 8BT drops down to a molar-rattling 30 Hz, so you'll hear the full sonic spectrum and produce better mixes. For EDM and hip-hop producers, in particular, a subwoofer is a must-have.

Although compatible with a variety of full-range studio monitors, the Eris Sub 8BT compact studio subwoofer was designed to complement the voicing and frequency response of the full range of compact Eris studio monitors, from the ultra-affordable Eris 3.5 to the Eris Studio 5.

The first PreSonus studio subwoofer to offer Bluetooth 5.0 wireless connectivity, the Eris Sub 8BT provides flexible wired connection options, as well, making it easy to add it to just about any monitoring setup. Onboard controls let you effortlessly create a 2.1 monitoring system and tune it to your room. Highpass filter and lowpass filter (crossover) controls ensure the Eris Sub 8BT starts working at the precise frequency where your main monitors stop, avoiding the flabby, smudged, low-end mess that occurs without a crossover.

Add a PreSonus Eris Sub 8BT subwoofer to your compact full-range system and hear, with precision accuracy, the powerful low-frequency sound you've been missing.

Features

8-inch composite low-frequency driver
Bluetooth 5.0 wireless audio stereo input
50W RMS, Class AB power amplifier
30 Hz to 200 Hz frequency response
100 dB SPL (Peak, @ 1 meter)
Input gain control (-30 dB to +6 dB, continuously variable)
Continuously variable lowpass filter (50 Hz to 130 Hz)
Defeatable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Erisr Sub 8BT outputs to the main speakers
Left and right, balanced 14-inch TRS and unbalanced RCA main inputs
Left and right, balanced 14-inch TRS and unbalanced RCA pass-through outputs for connecting satellite speakers
Polarity invert switch
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)

Built for your room.

Thanks to flexible configuration and I/O options, you can configure the Erisr Sub 8BT exactly to your mixing and listening needs. Connect existing monitors via 14-inch TRS or RCA cables, set the input level to your liking, and even invert the polarity. Pair a mobile device via Bluetoothr 5.0 wireless technology to quickly listen to a reference mix.

Specs

Electronics
Voltage: 220-240V UK
Wattage:100 Watts

Performance
Peak SPL: 100 dB (@ 1 meter)

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard
Audio controls: Volume Range (-30 dB to +6 dB) High Pass Filter (80 Hz @ -12 dB / octave) Low Pass Filter (50 Hz to 130 Hz, continuously variable) Polarity (0 degrees or 180 degrees)
Monitor inputs: 2 X Balanced 1/4" TRS, 2 x Unbalanced RCA
Power amplifier type: Class AB

Measurements
Dimensions: 11.70x9.80x12.70 in

Product depth: 12.7" (32.3 cm)
Product height: 11.77" (299 mm)
Product width: 9.8" (25.0 cm)

Notes: Part of the excellent Eris range, the Studio 8 is PreSonus's eight-inch two-way studio monitor, offering solid performance all the way down to 35 Hz and crystal clear reproduction thanks to 1.25-inch silk-dome tweeters and Elliptical Boundary Modeled waveguides.

Supplier's Notes:
With a smooth, accurate frequency response; powerful amplification with tons of headroom; and Acoustic Tuning functions that ensure you get the best sound, it's no wonder that Erisr-series studio monitors have been a runaway hit since their introduction. Building on the reputation of its award-winning predecessors, the Eris Studio 8 is a substantial update that delivers richer low-end and more controlled high-frequency response, reproducing every detail in your recordings with a natural sound unparalleled in its class.

Designed for superior performance in both home studios and professional mix rooms, the Eris Studio 8 features a custom-designed EBM (Elliptical Boundary Modeled) waveguide that provides superior high-frequency response and wide 100-degree horizontal dispersion to create a broader sweet spot. Narrow vertical dispersion reduces reflections from your desk, and a 1.25-inch, silk-dome tweeter ensures snappy, accurate transient reproduction. An elegant new enclosure design improves the waveguide performance so you'll hear the finest details in your mix.

The woven-composite, 8-inch, low-frequency driver offers Eris' signature tight, clear bass with plenty of punch. Its 140W of biamped power make the Eris Studio 5 more efficient than previous designs. The ported enclosure maximizes bass response and allows the Eris Studio 8 to reach down to an astonishing 35 Hz - with no subwoofer!

Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You'll have no problem hooking your Eris speakers up to virtually anything.

Features

8-inch woven composite, low-frequency transducer
1.25-inch (31.75 mm), ultra-low-mass, silk-dome, high-frequency transducer
100-(H) x 60-(V) EBM waveguide for a wide sweet spot
Front-firing acoustic port for superior bass-frequency reproduction and optimized, resonance-suppressing internal bracing
140W, Class AB bi-amplification
35 Hz to 20 kHz frequency response
106 dB SPL (Peak, @ 1 meter)
Acoustic Tuning controls: HF (i6 dB, continuously variable); Midrange (i6 dB, continuously variable), and Acoustic Space (flat, -2, -4 dB), plus highpass filter (Off, 80 Hz, 100 Hz)
RF interference, output-current limiting, over-temperature, transient, subsonic protection, and amplifier "soft start" feature (eliminates popping on power-up)
Internal power supply with IEC connector and power switch with on/off LED
Balanced XLR and 14-inch inputs and unbalanced RCA inputs

Set up your studio monitors for your room.

Erisr Studio 8 active monitors are equipped with Acoustic Tuning controls to ensure the flattest response in your mix environment. You get Low Cut, Mid, and High controls, as well as three-way Acoustic Space tuning that makes it easy to compensate for the boundary bass boost that occurs when a speaker is placed too close to a wall.

Honest. Expressive. Powerful.

Like all PreSonusr studio monitors, the Erisr Studio 8 offers consistent, accurate listening. Their stylish design makes them a welcome addition to any mix space, and their smooth, incredibly even frequency response ensures that your mixes will sound great everywhere.

Specs

Electronics
Voltage: 220-240V UK
Wattage: 80 Watts
Input impedance: 10 kO

Performance
Peak SPL: 6 dB (@ 1 meter)

Speakers
Crossover frequency: 3.5 kHz
Coverage pattern: 100 degree (H) x 60 degree (V)

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard

Audio controls: Volume High Frequency (+/-6 dB, centre 10 kHz, continuously variable) Mid Frequency (+/-6 dB, centre 1 kHz, continuously variable)

Audio switches: Acoustic Space (Flat, -2 dB, -4 dB) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
Monitor inputs: 1- Balanced XLR, 1- Balanced 14" TRS, 1- Unbalanced RCA
Power amplifier type: Class AB

Measurements

Dimensions: 16.50 x 9.80 x 11.70 IN

Depth: 11.73" (29.8 cm)
Height: 16.5" (41.91 cm)
Width: 9.84" (25 cm)

Notes: A clever pedal design based on classics. Mix and match tone and distortion circuits from legendary Nobels ODR-1 Natural Overdrive and Ibanez Tube Screamer. Versatile stuff.

Supplier's notes:
Imagine the ability to combine the best and defining characteristics of different overdrive & boost pedals in order to create hybrid sounds no one has ever played through before. That is exactly what Keeley have engineered with the Noble Screamer.

It's a 4-in-1 pedal that gives you two very familiar drive circuits and two brand new amp-like overdrive and distortion tones. It's almost like pedal-modelling, except these are 100% analogue circuits, and you decide which tone-control or clipping-section you want to play through.

Toggle between battle-tested, classic overdrive effects or innovate your sound using new hybrid tones; let your ears be the judge. Even with all of these features, the pedal remains a user-friendly three knob overdrive. The innovation in the Noble Screamer doesn't end there; this new design features true-bypass or buffered, truly silent switching, on the fly. The Keeley Noble Screamer Overdrive and Boost is entirely manufactured at Keeley Electronics and is the first release in a new aluminium enclosure.

The Noble Screamer gives you two tone control circuits to choose from - a Broad Spectrum Tone Control or Narrow Focus Filter Control.

When the Tone Switch is up and in the OD Position you will hear a 'Spectrum' type of tone control that has the ability to go from a flat EQ to an EQ that has a boost in the treble and bass response. If it is in the TS Position you have a Low Pass Filter that rolls off the high frequencies only.

Diode Clipping

Also the pedal offers both styles of diode clipping - Hard and Soft Clipping: If the Clipping Switch is in the OD Position it features Hard Diode Clipping which is an edgier, more aggressive tone. When in the TS Position that uses Soft Diode Clipping, like a tube amplifier softly overdriven.

Buffered and True Bypass

The Keeley Noble Screamer features Keeley's Vitamin K Infused Buffer for noise free switching. Keeley have developed an amazing sounding buffer which not only makes your rig sound better, it gives you silent switching with no tone loss.

No more pops and clicks to distract from your music. If you want to turn that feature off and go back to true bypass, simply press and hold down the foot switch for two seconds and the pedal will switch to True-Bypass. This is great for players that want the effect of plugging directly into their amp when the pedal is off.

Alternatively, players that want a strong and clear signal even when the Noble Screamer is turned off, simply hold the stomp switch down for two seconds and the effect is back to Buffered Bypass. Enjoy truly silent switching and let your music be the only voice.

Made In The USA

Keeley design, engineer, and manufacture the Noble Screamer in Oklahoma City. Everything about the Noble Screamer is geared towards the professional musician and their quest for an inspiring tone when the performance demands it. From the inside of the pedal and its meticulously built circuit boards and metal construction audio jacks to the outside of the effect its newly fabricated aluminium enclosure; Keeley make guitar effect pedals to be finely crafted musical instruments.

Notes: 30 fully polyphonic pitch-shifting options under 15 square inches!

Offering a total of 30 pitch shift options and expanded controls, the Pico Pitch Fork is the next evolution in pitch shifting from Electro-Harmonix. The original Pitch Fork has garnered praise from all styles of player at every level and the Pico Pitch Fork brings even more features to the celebrated pedal in an impossibly small package.

The Pico Pitch Fork features 10 pitch shift intervals and three modes of pitch-shifting - Up, Down and Dual. Dual mode features specially paired pitch shift intervals to allow for more musical effects.

Controls on the Pico Pitch Fork are simple and effective. SHIFT selects the Pitch Shift interval. BLEND sets the wet/dry blend of the output mix while VOL adjusts the overall output volume. SWEEP controls pitch bend sweep time when toggling between bypass and effect and back to create automatic whammy effects. The Pico Pitch Fork's footswitch can operate in two modes: Latching and Momentary. Latching turns the effect on with one footswitch press and off with another while Momentary turns the effect on only when the footswitch is being held for instant bursts of pitch-shifting pandemonium.

Specifications

Circuit: Digital
Bypass: Buffered Bypass
Audio: Mono
Power Supply: 9.6VDC-200mA power adapter included
Dimensions (in): 3.65 x 2.0 x 2.0
Current Draw: 100mA
Year Released: 2023

Notes: Exceptional value from PreSonus's entry-level studio monitors, packing a surprising punch for such small speakers. Add the optional Eris Sub 8BT subwoofer for serious low-end power.

Supplier's notes:
Presonus' best selling studio monitors just got better! Eris 4.5 BT media reference monitors deliver studio-quality sound in an elegant, compact form factor that makes them ideally suited for bedroom studios, video production, and high-fidelity gaming setups.

With 25 watts per side of onboard power, the Eris 4.5 BT reference monitors pack a serious punch, while still delivering clear, accurate audio. The weave and nature of the Eris 4.5 BT's 4.5-inch woofer result in tight bass that you can feel, as well as cleaner overall sound. The one-inch silk-dome tweeter produces refined high-frequencies and is designed to radiate sound with a wide pattern, creating a large optimal listening area. Improved speaker voicing over previous designs delivers richer lows and a smoother crossover transition for articulate, accurate transient reproduction through the frequency range and a less-fatiguing listening experience.

A convenient front-panel knob sets the level of both the power amp and the loud, clear headphone amplifier, with its front-panel jack. With four types of inputs, including fast, reliable, stereo Bluetoothr 5.0 connectivity, it's easy to connect just about any audio source to your Eris 4.5 BT reference monitors. High- and low-frequency controls let you easily adjust your Eris speaker's frequency response to compensate for the acoustics of your space and create the most accurate sonic reproduction possible.

Need a little more low end? Add an Eris Sub8 BT to build a perfectly matched 2.1 sound system that fits almost anywhere.

Features

4.5-inch, woven-composite, low-frequency driver
1-inch, ultra-low mass, silk-dome, high-frequency driver
Fast, reliable stereo Bluetoothr 5.0 wireless input
50W, Class AB dual amplification
70 Hz to 20 kHz frequency response
100 dB SPL (Peak, @ 1 meter)
High- and low-frequency Acoustic Tuning controls
Balanced, 14-inch TRS inputs; unbalanced, 1/4-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel 1/4-inch output
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)
Comes with speaker wire, 1/4-inch TRS to stereo RCA cable, and stereo RCA to stereo TS cable

Built to match your room.

Unlike other home audio speakers that hype the bass at the expense of other frequencies, Eris speakers provide an even response throughout the frequency range, from bass to treble. This means you'll hear your favourite music exactly as artists and engineers intend it to be heard. High and Low Acoustic Tuning controls let you dial in the Eris 4.5 BTs precisely to your environment to further ensure the best sound possible.


Honest. Expressive. Powerful.

Like all PreSonus media reference monitors, the Eris 4.5 BT offers consistent, accurate listening. Their stylish design makes them a welcome addition to living rooms, compact home theatre setups, and gaming rigs, and their smooth and even frequency response ensures that your music - and everyone else's - will sound incredible.

Electronics

Voltage: 220-240V UK
Wattage: 25 Watts (Each Speaker)
Input impedance: 10 kO

Performance

Peak SPL: 100 dB (@ 1 meter)

Speakers
Crossover frequency: 2.8 kHz

Hardware
Cabinet material: Vinyl-Laminated, Medium-Density Fiberboard
Audio controls: Volume High Frequency (+/-6 dB, center 10 kHz, continuously variable) Low Frequency (+/-6 dB, center 100 Hz, continuously variable)
Monitor inputs: Bluetooth 5.0, 1 x Stereo 1/8", 2 x Balanced 1/4" TRS, 2 x Unbalanced RCA
Power amplifier type: Class AB

Measurements

Dimensions: 9.50 x 6.40 x 7.00 IN

Product depth: 7" (17.8 cm)
Product height: 9.5" (24 cm)
Product width: 6.4" (16.3 cm)

Notes: ***B-STOCK: Box damaged, product in perfect working order***


A few years ago ZVEX Effects released the Candela Vibrophase, a candle-powered vibrato/phaser machined from solid brass and glass that used a mix of 1800s technology (a Sterling heat engine) and 60s/70s audio circuitry to create a lovely swirling effect. After numerous requests to put that sound into a guitar pedal, they came up with a way of dramatically broadening the spectrum of textures available using the original circuitry from the Candela.

It's presented to you here as the Vibrophase, a five-knob four-stage phaser that creates phase and vibrato nuances never heard before. Five knobs! Count 'em! Speed sweeps from maddeningly slow to puppy dog flippy, vibrato/phase sweeps from, erm, you'll figure that out, feedback sends the output back through the phaser again to raise intensity, and there are controls for the top end and bottom end of the sweep so you can completely tailor the sound to your song.

Notes: Customized to transport and protect the new Pioneer DDJ-FLX4 and DDJ-400 Controller. Crafted from 9 mm vinyl laminated plywood, sturdy aluminium profiles and heavy duty butterfly latches, it provides you with secure transport and workstation in one. Thanks to the integrated gliding laptop platform and the convenient cable access port, the setup is ready for action in no time at all.

Fits

Pioneer DDJ-FLX4
Pioneer DDJ-400
Pioneer DDJ-SB3

Basics

Heavy duty construction of 9 mm vinyl laminated plywood
Solid aluminium profiles and spring loaded latches
Incl. gliding laptop platform (removable)
Full padded interior keeps controller well-protected
Detachable front cover/panel

Specs

Outer measures: 59 x 40 x 20 cm
Inner measures: 44 x 29 x 4,5 cm (Controller-compartment)
Weight: 8,8 kg

Notes: ***B-STOCK: Box opened, but product is in excellent condition and in perfect working order***


Eurorack is a synthesist's toy chest. Stompboxes are a guitarist's toy chest. Each industry offers a seemingly infinite variety of products that enable musicians to build systems unique to their needs and to create a signature sound. Each is also somewhat addictive. Rare is the musician who doesn't eventually need a larger toy chest to house the accumulated toys.

Fortunately for the budget-conscious musician, Eurorack modules and stompboxes have always existed in separate worlds - someone whose Eurorack system consumes an entire wall in their home is usually not the same person whose pedalboard now requires a dedicated roadie just to transport it to the gig.

Intellijel's Stomp removes the barrier between Eurorack and stompbox. It provides the modular synthesist with a portal to stompbox nirvana, and the guitarist with a wormhole to the sonic manipulations of Eurorack modules.

Stomp enables the modular synthesist to interact with the impressive assortment of delays, choruses, flangers, phasers, fuzz boxes, tremolos, wah-wahs, amp simulators, compressors, and pitch shifter pedals available to guitarists. If your effects pedal is adorned with an expression pedal input, Stomp supports that too, and even features a built-in LFO to modulate your pedal's expression input. Need something crazier? No problem. Simply patch any modulation source from your modular system into the expression control jack to override the built-in LFO.

Conversely, guitarists can plug their guitar directly into Stomp's RETURN jack, giving them access to the myriad filters, ring mods, wavefolders and - most importantly - the near-infinite CV modulation delights inherent in Eurorack.

Features:

Robust Neutrik 1/4" TS connectors for the SEND/RETURN and TRS for the Expression interface
Signals arriving at Stomp's RETURN jack pass through a Class A triode emulator, allowing for some tube-like overdrive at high gain setting.
Stomp is more than just a simple level shifter - it's also an impedance converter, which provides proper drive and loading for any FX pedals or instruments you connect.
Separate gain controls on both the SEND and RETURN. This enables you to adjust the level of any audio being sent to the FX pedals as well as any audio coming back into the modular. Not only does this allow you to optimize the signal-to-noise ratio, but by significantly boosting the RETURN level, you can achieve some pleasingly overdriven tones.
Supports both Instrument and Line levels via a front panel switch.
Use Stomp's RETURN circuit as a "direct box" for connecting any instrument.
The high input impedance of the RETURN circuit allows it to be used as a piezo pickup preamp for acoustic instruments.
Use Stomp in the studio as an active "re-amping" device to play pre-recorded tracks back through guitar amplifiers or pedals.
All inputs are protected for minimum RF interference.
Return signal can be phase inverted for use with those pedals or effects types that invert phase.
Low MIX output impedance for driving long cables, lower noise, and minimum interference from outside sources.
The Expression Pedal Output converts analogue CV sources (or the internal LFO) into an output compatible with most stompbox Expression inputs.

Size: 8HP
Depth: 35mm
Power: 47mA @ +12V 13mA @ -12V

Notes: ***B-STOCK: Box damaged, product in perfect working order***


Configuring a streaming setup from scratch can be a daunting task, particularly for users with little or no music production experience. The minimalist design of the AG01 takes this into account by combining a high-quality condenser microphone with DSP effects, a LOOPBACK function, flexible input connectivity, and a simple, intuitive mixer for stress-free streaming operation.

Simply connect to your computer or iOS/Android device along with the headphones of your choice, then set your levels and you've got a fully operational streaming station that can be up and running within minutes. If you're an aspiring live streamer that requires a compact yet comprehensive, high quality all-in-one solution, the AG01 is ready when you are.

In most streaming applications your microphone is likely to feature prominently onscreen so it is important for it to complement your overall vision. With a unique and iconic design that blends classic and contemporary aesthetics, the AG01 looks as good as it sounds, offering both black and white-based models to suit your preference.

In addition to the condenser microphone audio input, the AG01 is equipped with a mini stereo line input jack, and an upgraded 4-pole mini jack (TRRS) for smartphones that allows input and output. You can also add audio from devices connected via USB in LOOPBACK mode. Combined with these features, this microphone-type model can cover a wide variety of streaming styles that could not be achieved in the past without a separate mixing device.

The AG01's high-performance condenser microphone utilizes a cardioid polar pattern that captures your voice or musical instrument performance precisely, and converts it into high resolution audio (192kHz, 24bit) while blocking out unwanted ambient noise from the rear or sides.

The AG01 features high-quality DSP effects, allowing you to easily add COMP/EQ and REVERB to color and hone your audio and get the best sound possible to broadcast to your audience. What's more, these tools are processed by the internal DSP chip so there is no delay, making the AG01 particularly valuable for live streaming, when real-time accuracy is required.

You can also turn these effects off completely to capture pure, raw recordings of the AG01's condenser microphone for music/audio production that will be edited by an engineer later.

There are many situations in live streaming where you may need to make audio adjustments on the fly. The carefully configured physical controls of the AG01 respond to these needs providing a simple operating experience that won't detract from your live content or performances.

AG Controller offers two modes, "Simple" and "Detail," which allow users with varying degrees of audio engineering experience to easily and precisely check and adjust the AG's DSP processing from any Windows/Mac or iOS device connected via USB.

The AG01 can be easily placed on a desk or any flat surface with its dedicated stand, or mounted on a desk arm, making it adaptable to almost any environment.

It can also be used in combination with a mobile battery allowing you to take your fully functioning streaming station anywhere you like.

*For stable operation of the AG01, a power supply of DC 5V 900mA or more is required.

AG01 comes bundled with Cubase AI music production software, as well as WaveLab Cast for audio production and editing. The AG01 is also compatible with Rec'n'Share and Cubasis LE applications for iOS devices which are available free of charge from Yamaha and Steinberg to support and inspire your audio content creation.

Specifications

Microphone Unit: Back electret condenser type
Polar Pattern: Cardioid
Adress Type: Side
Frequency Response: 30 Hz - 20 kHz
Max Input SPL: 110 dB (THD - 1.0% at 1 kHz)
Sensitivity: -34 dB i 3 dB (0 dB=1 V/Pa, at 1 kHz)
Connector: USB Type-C

Input Channels
Microphone: 1 (Mono condenser microphone)
AUX: 1 - Stereo mini
Smartphone: 1 - 4-pole mini input/output (TRRS)
USB: 1

Output Channels
PHONES: 1 - Stereo mini
Smartphone: 1 - 4-pole mini input/output (TRRS)
USB: 1
Bus: 1 Stereo
Functions: MIC GAIN (HIGH / MID / LOW), MUTE button x 1, STREAMING OUT (MIC / INPUT MIX / LOOPBACK), MIX MINUS MIC (ON / OFF)

On-board processors
DSP: COMP/EQ, REVERB (SPX Reverb) *Detail is Controlled on AG Controller
USB Audio: 2 IN / 2 OUT, USB Audio Class 2.0 Compliant, Sampling Frequency: Max. 192 kHz, Bit Depth: 24-bit, Type-C
USB DC Power Input: 1 - Type-C, 5 V DC, 900 mA

General specifications
Power requirements 5 V DC, 900 mA
Power consumption Max. 4.5W
Dimensions: W: 116 mm (4.6") H: 281 mm (11.1") D: 118 mm (4.6")
Net weight: 1.2 kg (2.6 lbs)
Included accessories: USB 2.0 Cable (1.5 m), Quick Guide, Safety Guide, Wavelab Cast Download Information, Cubase AI Download Information
Others: Operating Temperature: 0 to + 40C

Notes: The Minicase by Flame is made of bamboo wood and is offered in a limited edition.

Modules up to a depth of 5.3 cm can be installed in the case. For example, the Fire Drum Synth Module and the Takt Rhythm Sequencer.

Technical data:

Module width: 56TE
Installation depth: 5,3cm
Outer dimensions: 30x15x6cm
6x 16pin Doepfer connectors for modules
Plug-in power supply with DIN connector:
110-230VAC 28W, with +5V/2,5A +12V/1A -12V/0,3

HP : 56

Notes: ***B-STOCK: Box opened, product in perfect working order***


Erica Synths Modulator is an advanced modulation and pitched noise source with focus on rhythmic (but not limited to) compositions in mind. It features two identical syncable to the BPM LFOs/noise sources with selectable morphing waveshapes. LFO frequency can be manually adjustable, as well as they provide frequency divisions and multiplication in Sync mode. Each LFO has two outputs- main one and secondary one with adjustable phase, so you can create evolving modulations. Furthermore, LFOs can be linked to work at the same frequency and the first LFO has built in VCA to control output signal amplitude.

Notes: Nive Grad is a level shifter designed for simplicity. Two Eurorack signals can be attenuated down to pedal and line levels, and two external line or pedal signals can be amplified up to Eurorack level. Integrating a drum machine, external synth, effects processor, or guitar with your Eurorack system has never been easier!

Nive Grad uses 1/8" jacks to save HP. If you want to use 1/4" gear with your system, ask your modular supplier about mono/TS 1/8" to 1/4" adapters or adapter cables.

Nive Grad pairs well with Noise Engineering's Xer Mixa system mixer, but can be used in any Eurorack system.

Type: Universal drum synthesizer
Size: Level Shifter
Depth: .9 inches
Power: 2x5 Eurorack
+12 V: 25 mA
-12 V: 25 mA
5 V: 0mA
Nive - level - from Latin niveum

Grad - step or degree- from Latin Gradus

Notes: Nive Grad is a level shifter designed for simplicity. Two Eurorack signals can be attenuated down to pedal and line levels, and two external line or pedal signals can be amplified up to Eurorack level. Integrating a drum machine, external synth, effects processor, or guitar with your Eurorack system has never been easier!

Nive Grad uses 1/8" jacks to save HP. If you want to use 1/4" gear with your system, ask your modular supplier about mono/TS 1/8" to 1/4" adapters or adapter cables.

Nive Grad pairs well with Noise Engineering's Xer Mixa system mixer, but can be used in any Eurorack system.

Type: Universal drum synthesizer
Size: Level Shifter
Depth: .9 inches
Power: 2x5 Eurorack
+12 V: 25 mA
-12 V: 25 mA
5 V: 0mA
Nive - level - from Latin niveum

Grad - step or degree- from Latin Gradus

Notes: Further pushing the boundary of clock-defined pedals, the latest entry in Old Blood Noise Endeavors' BL series is a Phase Repeater, in the process making a genre entirely of its own.

Phase repetition takes the modulation of a phaser and applies it to the realm of time, creating a completely unique sound and more like delay or reverb than its namesake phaser. First used in the OBNE Dweller pedal, the BL-52 Phase Repeater represents a new spin on the sound, with simple controls including a Clock slider that enlightens the timing of everything in the pedal.

At a point, describing sound feels like describing time: the fourth dimensional perplexity of it all! Of course, this makes sense in that time being intermingled with sound and frequencies only existing over a period of time, whatnot. We spend a lot of time thinking about all-pass filters, you and I. How they pass all frequencies, but at different times. How this, in the digital realm, can create a phaser or a reverb, depending on how much memory you allow it and thus, how much of the fourth dimension it's playing with at any given... well, time.

BL-52 is what we call a phase repeater pedal. It's an effect we stumbled upon in our Dweller pedal development, living somewhere between phaser, delay and reverb, as it creates a series of repeats both unexpected and pleasing. It's digital trickery to do something quite unfamiliar and once you've bonded with it, is irreplaceable.

The BL-52 Phase Repeater is solely focused on that effect, with the Clock control setting the timing of the entire system: the sample rate that determines signal fidelity, the timing of the phase repetition and the speed of the LFO that shapes the diffusion of the repetition.

In short, it is an effect that does not require exactness, but rather openness to where the repetition will lead you.

Review: A long awaited, bumper six album pack of music and voice assembled by Delia Derbyshire of Radiophonic Workshop fame, and broadcast on four shows between January 1964 and September 1965, collectively known as Inventions for Radio. These experimental, longform shows were conceived by playwright Barry Bermange and were made up of the voices of callers-in, speaking on four themes: dreams, the existence of God, life after death and ageing. The participatory nature of these shows deviated massively from the radio status quo of the time, and the participants were selected to eschew the standard received drawl of most 60s radio presenters.
The music and editing was done by Derbyshire, whose avant garde sonic settings lend the audio an enigmatic, spectral quality. Although she was not credited for her contribution, nor were the broadcasts available commercially, they still developed a cult following. Silva Screen now presents the four broadcasts in their entirety, each on a separate LP, with two LPs of bonus material, and a booklet of detailed notes by producer Mark Ayres and David Butler of the Delia Derbyshire Archive. An elusive and essential landmark of 20th century sound collage.
.

Notes: Transpos lets you transpose three CV channel with a single source.

Adder:

The voltage of each CV input can be varied by plus or minus two octaves depending on the switch and the potentiometer of each channel. Transpos uses precision regulators: for example if we increase by a fifth with the switch on "+" we reduce it by a fifth when we pass on "-".

Transposer:

The 1V/o CV input will influence each of the three channels. By turning the CV potentiometer you can globally increase or decrease the transposition of the three channels at the same time.

Dimensions
8 HP
40 mm deep

Current Draw
70 mA +12V
70 mA -12V
0 mA 5V

Notes: As an Old Blood Noise Endeavors take on reverb, BL-37 Reverb Variable-Clock Effector is a new voice with a streamlined control set: a reverb both more immediate and more degraded than any other.

Thanks to its simple yet intuitive and interactive control set this modulated reverb can be quick and highly reflective or slow and stretchy with noticeable pitched undulations.

The sheer audacity of sound, to fill a room, to fill our heads, to fill our hearts. To act digitally as if tangible, as if these walls could talk, as if this were a real space and not a series of all-pass filters and modulated delays meant to capture the idea of somewhere we'd been before and something we'd done before and something we were before, as if. To give control over the whole thing, to simply stretch by hand the entire clock! It's a heck of a concept really.

BL-37 is a reverb pedal. It is lush but also ringy, and easily stretchable. It modulates, and sometimes that modulation feels certain, an obvious pitch bend, while other times it washes, simply a shimmering softening element. The control set for BL-37 is simple. A Clock slider sets the timing of the entire system - the sample rate that determines signal fidelity, the timing of the reverb, and the speed of the modulation within that reverb are all affected as the slider slides. Additional controls for Feedback, Mix, and Volume allow you to further craft the spatial voice in play here.

Notes: ***B-STOCK: Item refurbished, repaired and in perfect working order.***


More bang for your buck? Omnitronic's four-channel offering is a competitively priced alternative to entry-level mixers from Pioneer or A&H. Built-in mp3 playback from USBs and audio streaming over Bluetooth.

Supplier notes:
- 4 input channels with gain control, LED level meter, 3-band equalizer, cue button and channel fader
- DJ microphone channel with level control, 2-band equalizer, on/off and talkover switch
- Integrated Bluetooth audio streaming for your smartphones and tablets
- MP3 player with USB port and blue LCD screen
- Pre-fader listening to all input channels and the master output via adjustable stereo headphones output
- Crossfader with assignment switches and adjustable curve
- Master channel with level and balance control
- 10-digit stereo LED level meter
- Adjustable monitor output (DJ booth)
- 10 line and 2 phono inputs via RCA jacks
- Balanced XLR and RCA outputs
- Record output, independent of the master

Review: ***B-STOCK: Box slightly torn and creased, but content in perfect condition***


Steely Dan are the kind of band where everyone has their favourite album, with a fanbase who might well get a little heated debating which phase of the band is superior. But when it comes down to it, everyone will agree Aja is their masterpiece, where that exacting studio process and the elevated songwriting hit some magical sweet spot that yielded the semi-mythical perfect album. The grooves are so slinky as 'Black Cow' opens the record up, they spring with joy out of 'Peg' and they lock down heavy on 'Josie', and there's so much more in between. This faithful reproduction from Analogue Productions is a limited audiophile edition for a band who were made for audiophiles.

Notes: The Airlectron Sensor Recorder module is equipped with a sunlight independent distance sensor to generate CV output voltages.

A distance sensor reacts to hand movements and varies the CV output voltages (bipolar/max +/- 5 V, unipolar/max 0-+10 V). The range control adjusts the detection distance (2-50 cm). The freeze function keeps the voltage when there is no continuous movement.

The recorder/looper can be used to record motion sequences for up to two minutes. This recorded data can be played back in a loop or once and restarted at the START/RESET input. LEDs indicate the status of the gate inputs and outputs.

Features:

3x controller
1x Vishay distance sensor
3x gate/trigger in- and outputs
2x CV outputs unipolar/bipolar
Power supply via Doepfer connector

Notes: Another typically creative offering from the good people at Soma, the Metaconformer is a MIDI router and thru box with some nice touches, including Combiner mode to join monophonic instruments into one big polyphonic patch.

Supplier's Notes:
METACONFORMER is a smart MIDI router and thru box.

The METACONFORMER has 2 independent MIDI inputs and 4 MIDI outputs. One of the outputs can be configured as a sync signal source.

Today METACONFORMER supports 3 modes of processing MIDI messages:

Splitter mode allows you to split the keyboard of one MIDI channel into several zones. Notes from each zone are sent to only one instrument. This allows you to simultaneously play several instruments at once, listen to the interaction of timbres without having to switch the MIDI channel.

Combiner mode allows you to combine several monophonic instruments into one multitimbral polyphonic instrument. This works the same way as a polyphonic synthesizer's algorithm when it activates its voices. Only instead of voices with the same dynamics and parameters, you can play completely different timbres, which greatly expands the possibilities for creating interesting harmonies and rhythms.

Translator mode allows you to play the sound core parameter by pressing notes. Each received note is translated into a CC message corresponding to the desired parameter. This mode allows you to play with sound parameters, rather than simply enter them by rotating the knob. This mode works great with granular delays, resonant filters and paraphonic oscillators.

Power supply: DC +5V via USB
Current consumption: 20 ma max
Dimensions: 148 x 50 x 20 mm
Weight: 0.15 kg